summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--package/ifxmips-dsl-api/Makefile5
-rw-r--r--package/ifxmips-dsl-api/patches/500-portability.patch184
2 files changed, 189 insertions, 0 deletions
diff --git a/package/ifxmips-dsl-api/Makefile b/package/ifxmips-dsl-api/Makefile
index fdb0721..3fc31ed 100644
--- a/package/ifxmips-dsl-api/Makefile
+++ b/package/ifxmips-dsl-api/Makefile
@@ -117,6 +117,11 @@ define Build/Prepare
$(TAR) -C $(PKG_BUILD_DIR) -xzf $(DL_DIR)/$(FW_BASE_NAME)_b-$(FW_B_VER).tar.gz
endef
+define Build/Configure
+ (cd $(PKG_BUILD_DIR); aclocal && autoconf && automake)
+ $(call Build/Configure/Default)
+endef
+
define Build/Compile
cd $(LINUX_DIR); \
ARCH=mips CROSS_COMPILE="$(KERNEL_CROSS)" \
diff --git a/package/ifxmips-dsl-api/patches/500-portability.patch b/package/ifxmips-dsl-api/patches/500-portability.patch
new file mode 100644
index 0000000..cbac514
--- /dev/null
+++ b/package/ifxmips-dsl-api/patches/500-portability.patch
@@ -0,0 +1,184 @@
+--- a/configure.in
++++ b/configure.in
+@@ -333,12 +333,12 @@ AC_ARG_ENABLE(ifxos-include,
+ echo Set the lib_ifxos include path $enableval
+ AC_SUBST([IFXOS_INCLUDE_PATH],[$enableval])
+ else
+- echo -e Set the default lib_ifxos include path $DEFAULT_IFXOS_INCLUDE_PATH
++ echo Set the default lib_ifxos include path $DEFAULT_IFXOS_INCLUDE_PATH
+ AC_SUBST([IFXOS_INCLUDE_PATH],[$DEFAULT_IFXOS_INCLUDE_PATH])
+ fi
+ ],
+ [
+- echo -e Set the default lib_ifxos include path $DEFAULT_IFXOS_INCLUDE_PATH
++ echo Set the default lib_ifxos include path $DEFAULT_IFXOS_INCLUDE_PATH
+ AC_SUBST([IFXOS_INCLUDE_PATH],[$DEFAULT_IFXOS_INCLUDE_PATH])
+ ]
+ )
+@@ -1702,73 +1702,73 @@ dnl Set the configure params for dist ch
+ AC_SUBST([DISTCHECK_CONFIGURE_PARAMS],[$CONFIGURE_OPTIONS])
+
+ AC_CONFIG_COMMANDS_PRE([
+-echo -e "------------------------------------------------------------------------"
+-echo -e " Configuration for drv_dsl_cpe_api:"
+-echo -e " Configure model type: $DSL_CONFIG_MODEL_TYPE"
+-echo -e " Source code location: $srcdir"
+-echo -e " Compiler: $CC"
+-echo -e " Compiler c-flags: $CFLAGS"
+-echo -e " Extra compiler c-flags: $EXTRA_DRV_CFLAGS"
+-echo -e " Host System Type: $host"
+-echo -e " Install path: $prefix"
+-echo -e " Linux kernel include path: $KERNEL_INCL_PATH"
+-echo -e " Linux kernel build path: $KERNEL_BUILD_PATH"
+-echo -e " Linux kernel architecture: $KERNEL_ARCH"
+-echo -e " Include IFXOS: $INCLUDE_DSL_CPE_API_IFXOS_SUPPORT"
+-echo -e " IFXOS include path: $IFXOS_INCLUDE_PATH"
+-echo -e " Driver Include Path $DSL_DRIVER_INCL_PATH"
+-echo -e " DSL device: $DSL_DEVICE_NAME"
+-echo -e " Max device number: $DSL_DRV_MAX_DEVICE_NUMBER"
+-echo -e " Channels per line: $DSL_CHANNELS_PER_LINE"
+-echo -e " Build lib (only for kernel 2.6) $DSL_CPE_API_LIBRARY_BUILD_2_6"
+-echo -e " DSL data led flash frequency: $DSL_DATA_LED_FLASH_FREQUENCY Hz"
+-echo -e " Disable debug prints: $DSL_DEBUG_DISABLE"
+-echo -e " Preselection of max. debug level: $DSL_DBG_MAX_LEVEL_SET"
+-echo -e " Preselected max. debug level: $DSL_DBG_MAX_LEVEL_PRE"
+-echo -e " Include deprecated functions: $INCLUDE_DEPRECATED"
+-echo -e " Include Device Exception Codes: $INCLUDE_DEVICE_EXCEPTION_CODES"
+-echo -e " Include FW request support: $INCLUDE_FW_REQUEST_SUPPORT"
+-echo -e " Include ADSL trace buffer: $INCLUDE_DSL_CPE_TRACE_BUFFER"
+-echo -e " Include ADSL MIB: $INCLUDE_DSL_ADSL_MIB"
+-echo -e " Include ADSL LED: $INCLUDE_ADSL_LED"
+-echo -e " Include CEOC: $INCLUDE_DSL_CEOC"
+-echo -e " Include config get support: $INCLUDE_DSL_CONFIG_GET"
+-echo -e " Include System i/f configuration: $INCLUDE_DSL_SYSTEM_INTERFACE"
+-echo -e " Include Resource Statistics: $INCLUDE_DSL_RESOURCE_STATISTICS"
+-echo -e " Include Framing Parameters: $INCLUDE_DSL_FRAMING_PARAMETERS"
+-echo -e " Include G997 Line Inventory: $INCLUDE_DSL_G997_LINE_INVENTORY"
+-echo -e " Include G997 Framing Parameters: $INCLUDE_DSL_G997_FRAMING_PARAMETERS"
+-echo -e " Include G997 per tone data: $INCLUDE_DSL_G997_PER_TONE"
+-echo -e " Include G997 status: $INCLUDE_DSL_G997_STATUS"
+-echo -e " Include G997 alarm: $INCLUDE_DSL_G997_ALARM"
+-echo -e " Include DSL Bonding: $INCLUDE_DSL_BONDING"
+-echo -e " Include Misc Line Status $INCLUDE_DSL_CPE_MISC_LINE_STATUS"
+-echo -e " Include DELT: $INCLUDE_DSL_DELT"
+-echo -e " Include DELT data static storage: $DSL_CPE_STATIC_DELT_DATA"
+-echo -e " Include PM: $INCLUDE_DSL_PM"
+-echo -e " Include PM config: $INCLUDE_DSL_CPE_PM_CONFIG"
+-echo -e " Include PM total: $INCLUDE_DSL_CPE_PM_TOTAL_COUNTERS"
+-echo -e " Include PM history: $INCLUDE_DSL_CPE_PM_HISTORY"
+-echo -e " Include PM showtime: $INCLUDE_DSL_CPE_PM_SHOWTIME_COUNTERS"
+-echo -e " Include PM optional: $INCLUDE_DSL_CPE_PM_OPTIONAL_PARAMETERS"
+-echo -e " Include PM line: $INCLUDE_DSL_CPE_PM_LINE_COUNTERS"
+-echo -e " Include PM line event showtime: $INCLUDE_DSL_CPE_PM_LINE_EVENT_SHOWTIME_COUNTERS"
+-echo -e " Include PM channel: $INCLUDE_DSL_CPE_PM_CHANNEL_COUNTERS"
+-echo -e " Include PM channel extended: $INCLUDE_DSL_CPE_PM_CHANNEL_EXT_COUNTERS"
+-echo -e " Include PM data path: $INCLUDE_DSL_CPE_PM_DATA_PATH_COUNTERS"
+-echo -e " Include PM data path failure: $INCLUDE_DSL_CPE_PM_DATA_PATH_FAILURE_COUNTERS"
+-echo -e " Include PM ReTx: $INCLUDE_DSL_CPE_PM_RETX_COUNTERS"
+-echo -e " Include PM line threshold: $INCLUDE_DSL_CPE_PM_LINE_THRESHOLDS"
+-echo -e " Include PM channel threshold: $INCLUDE_DSL_CPE_PM_CHANNEL_THRESHOLDS"
+-echo -e " Include PM data path threshold: $INCLUDE_DSL_CPE_PM_DATA_PATH_THRESHOLDS"
+-echo -e " Include PM ReTx threshold: $INCLUDE_DSL_CPE_PM_RETX_THRESHOLDS"
+-echo -e " Include FW memory free support: $INCLUDE_DSL_FIRMWARE_MEMORY_FREE"
+-echo -e "----------------------- deprectated ! ----------------------------------"
+-echo -e " Include PM line failure: $INCLUDE_DSL_CPE_PM_LINE_FAILURE_COUNTERS"
+-echo -e ""
+-echo -e " Settings:"
+-echo -e " Configure options: $CONFIGURE_OPTIONS"
+-echo -e "------------------------------------------------------------------------"
++echo "------------------------------------------------------------------------"
++echo " Configuration for drv_dsl_cpe_api:"
++echo " Configure model type: $DSL_CONFIG_MODEL_TYPE"
++echo " Source code location: $srcdir"
++echo " Compiler: $CC"
++echo " Compiler c-flags: $CFLAGS"
++echo " Extra compiler c-flags: $EXTRA_DRV_CFLAGS"
++echo " Host System Type: $host"
++echo " Install path: $prefix"
++echo " Linux kernel include path: $KERNEL_INCL_PATH"
++echo " Linux kernel build path: $KERNEL_BUILD_PATH"
++echo " Linux kernel architecture: $KERNEL_ARCH"
++echo " Include IFXOS: $INCLUDE_DSL_CPE_API_IFXOS_SUPPORT"
++echo " IFXOS include path: $IFXOS_INCLUDE_PATH"
++echo " Driver Include Path $DSL_DRIVER_INCL_PATH"
++echo " DSL device: $DSL_DEVICE_NAME"
++echo " Max device number: $DSL_DRV_MAX_DEVICE_NUMBER"
++echo " Channels per line: $DSL_CHANNELS_PER_LINE"
++echo " Build lib (only for kernel 2.6) $DSL_CPE_API_LIBRARY_BUILD_2_6"
++echo " DSL data led flash frequency: $DSL_DATA_LED_FLASH_FREQUENCY Hz"
++echo " Disable debug prints: $DSL_DEBUG_DISABLE"
++echo " Preselection of max. debug level: $DSL_DBG_MAX_LEVEL_SET"
++echo " Preselected max. debug level: $DSL_DBG_MAX_LEVEL_PRE"
++echo " Include deprecated functions: $INCLUDE_DEPRECATED"
++echo " Include Device Exception Codes: $INCLUDE_DEVICE_EXCEPTION_CODES"
++echo " Include FW request support: $INCLUDE_FW_REQUEST_SUPPORT"
++echo " Include ADSL trace buffer: $INCLUDE_DSL_CPE_TRACE_BUFFER"
++echo " Include ADSL MIB: $INCLUDE_DSL_ADSL_MIB"
++echo " Include ADSL LED: $INCLUDE_ADSL_LED"
++echo " Include CEOC: $INCLUDE_DSL_CEOC"
++echo " Include config get support: $INCLUDE_DSL_CONFIG_GET"
++echo " Include System i/f configuration: $INCLUDE_DSL_SYSTEM_INTERFACE"
++echo " Include Resource Statistics: $INCLUDE_DSL_RESOURCE_STATISTICS"
++echo " Include Framing Parameters: $INCLUDE_DSL_FRAMING_PARAMETERS"
++echo " Include G997 Line Inventory: $INCLUDE_DSL_G997_LINE_INVENTORY"
++echo " Include G997 Framing Parameters: $INCLUDE_DSL_G997_FRAMING_PARAMETERS"
++echo " Include G997 per tone data: $INCLUDE_DSL_G997_PER_TONE"
++echo " Include G997 status: $INCLUDE_DSL_G997_STATUS"
++echo " Include G997 alarm: $INCLUDE_DSL_G997_ALARM"
++echo " Include DSL Bonding: $INCLUDE_DSL_BONDING"
++echo " Include Misc Line Status $INCLUDE_DSL_CPE_MISC_LINE_STATUS"
++echo " Include DELT: $INCLUDE_DSL_DELT"
++echo " Include DELT data static storage: $DSL_CPE_STATIC_DELT_DATA"
++echo " Include PM: $INCLUDE_DSL_PM"
++echo " Include PM config: $INCLUDE_DSL_CPE_PM_CONFIG"
++echo " Include PM total: $INCLUDE_DSL_CPE_PM_TOTAL_COUNTERS"
++echo " Include PM history: $INCLUDE_DSL_CPE_PM_HISTORY"
++echo " Include PM showtime: $INCLUDE_DSL_CPE_PM_SHOWTIME_COUNTERS"
++echo " Include PM optional: $INCLUDE_DSL_CPE_PM_OPTIONAL_PARAMETERS"
++echo " Include PM line: $INCLUDE_DSL_CPE_PM_LINE_COUNTERS"
++echo " Include PM line event showtime: $INCLUDE_DSL_CPE_PM_LINE_EVENT_SHOWTIME_COUNTERS"
++echo " Include PM channel: $INCLUDE_DSL_CPE_PM_CHANNEL_COUNTERS"
++echo " Include PM channel extended: $INCLUDE_DSL_CPE_PM_CHANNEL_EXT_COUNTERS"
++echo " Include PM data path: $INCLUDE_DSL_CPE_PM_DATA_PATH_COUNTERS"
++echo " Include PM data path failure: $INCLUDE_DSL_CPE_PM_DATA_PATH_FAILURE_COUNTERS"
++echo " Include PM ReTx: $INCLUDE_DSL_CPE_PM_RETX_COUNTERS"
++echo " Include PM line threshold: $INCLUDE_DSL_CPE_PM_LINE_THRESHOLDS"
++echo " Include PM channel threshold: $INCLUDE_DSL_CPE_PM_CHANNEL_THRESHOLDS"
++echo " Include PM data path threshold: $INCLUDE_DSL_CPE_PM_DATA_PATH_THRESHOLDS"
++echo " Include PM ReTx threshold: $INCLUDE_DSL_CPE_PM_RETX_THRESHOLDS"
++echo " Include FW memory free support: $INCLUDE_DSL_FIRMWARE_MEMORY_FREE"
++echo "----------------------- deprectated ! ----------------------------------"
++echo " Include PM line failure: $INCLUDE_DSL_CPE_PM_LINE_FAILURE_COUNTERS"
++echo ""
++echo " Settings:"
++echo " Configure options: $CONFIGURE_OPTIONS"
++echo "------------------------------------------------------------------------"
+ ])
+
+ AC_CONFIG_FILES([Makefile src/Makefile])
+--- a/src/Makefile.am
++++ b/src/Makefile.am
+@@ -303,7 +303,7 @@ if KERNEL_2_6
+ drv_dsl_cpe_api_OBJS = "$(subst .c,.o,$(filter %.c,$(drv_dsl_cpe_api_SOURCES)))"
+
+ drv_dsl_cpe_api.ko: $(drv_dsl_cpe_api_SOURCES)
+- @echo -e "drv_dsl_cpe_api: Making Linux 2.6.x kernel object"
++ @echo "drv_dsl_cpe_api: Making Linux 2.6.x kernel object"
+ if test ! -e common/drv_dsl_cpe_api.c ; then \
+ echo "copy source files (as links only!)"; \
+ for f in $(filter %.c,$(drv_dsl_cpe_api_SOURCES)); do \
+@@ -311,10 +311,10 @@ drv_dsl_cpe_api.ko: $(drv_dsl_cpe_api_SO
+ cp -s $(addprefix @abs_srcdir@/,$$f) $(PWD)/`dirname $$f`/ ; \
+ done \
+ fi
+- @echo -e "# drv_dsl_cpe_api: Generated to build Linux 2.6.x kernel object" > $(PWD)/Kbuild
+- @echo -e "obj-m := $(subst .ko,.o,$@)" >> $(PWD)/Kbuild
+- @echo -e "$(subst .ko,,$@)-y := $(drv_dsl_cpe_api_OBJS)" >> $(PWD)/Kbuild
+- @echo -e "EXTRA_CFLAGS := $(CFLAGS) -DHAVE_CONFIG_H $(drv_dsl_cpe_api_CFLAGS) $(DSL_DRIVER_INCL_PATH) $(IFXOS_INCLUDE_PATH) -I@abs_srcdir@/include -I$(PWD)/include" >> $(PWD)/Kbuild
++ @echo "# drv_dsl_cpe_api: Generated to build Linux 2.6.x kernel object" > $(PWD)/Kbuild
++ @echo "obj-m := $(subst .ko,.o,$@)" >> $(PWD)/Kbuild
++ @echo "$(subst .ko,,$@)-y := $(drv_dsl_cpe_api_OBJS)" >> $(PWD)/Kbuild
++ @echo "EXTRA_CFLAGS := $(CFLAGS) -DHAVE_CONFIG_H $(drv_dsl_cpe_api_CFLAGS) $(DSL_DRIVER_INCL_PATH) $(IFXOS_INCLUDE_PATH) -I@abs_srcdir@/include -I$(PWD)/include" >> $(PWD)/Kbuild
+ $(MAKE) ARCH=@KERNEL_ARCH@ -C @KERNEL_BUILD_PATH@ O=@KERNEL_BUILD_PATH@ M=$(PWD) modules
+
+ clean-generic: