diff options
| -rw-r--r-- | include/site/m68k-linux | 26 | ||||
| -rw-r--r-- | include/site/m68k-openwrt-linux-gnu | 5 | ||||
| -rw-r--r-- | include/site/m68k-openwrt-linux-uclibc | 5 | ||||
| -rw-r--r-- | include/target.mk | 1 | ||||
| -rw-r--r-- | package/base-files/Makefile | 2 | ||||
| -rw-r--r-- | target/Config.in | 4 | ||||
| -rw-r--r-- | target/linux/coldfire/Makefile | 23 | ||||
| -rw-r--r-- | target/linux/coldfire/config-default | 109 | ||||
| -rw-r--r-- | target/linux/coldfire/image/Makefile | 29 | ||||
| -rw-r--r-- | target/linux/coldfire/patches/001-cf.patch | 51053 | ||||
| -rw-r--r-- | toolchain/gcc/Config.in | 1 | ||||
| -rw-r--r-- | toolchain/gcc/Config.version | 1 | ||||
| -rw-r--r-- | toolchain/uClibc/config-0.9.30+nptl/m68k | 5 | ||||
| -rw-r--r-- | toolchain/uClibc/config-0.9.30.1/m68k | 5 |
14 files changed, 51268 insertions, 1 deletions
diff --git a/include/site/m68k-linux b/include/site/m68k-linux new file mode 100644 index 0000000..1005902 --- /dev/null +++ b/include/site/m68k-linux @@ -0,0 +1,26 @@ +ac_cv_c_littleendian=${ac_cv_c_littleendian=no} +ac_cv_c_bigendian=${ac_cv_c_bigendian=yes} + +ac_cv_sizeof___int64=0 +ac_cv_sizeof_char=1 +ac_cv_sizeof_int=4 +ac_cv_sizeof_int16_t=2 +ac_cv_sizeof_int32_t=4 +ac_cv_sizeof_int64_t=8 +ac_cv_sizeof_long_int=4 +ac_cv_sizeof_long_long=8 +ac_cv_sizeof_long=4 +ac_cv_sizeof_off_t=4 +ac_cv_sizeof_short_int=2 +ac_cv_sizeof_short=2 +ac_cv_sizeof_size_t=4 +ac_cv_sizeof_u_int16_t=2 +ac_cv_sizeof_u_int32_t=4 +ac_cv_sizeof_u_int64_t=8 +ac_cv_sizeof_uint16_t=2 +ac_cv_sizeof_uint32_t=4 +ac_cv_sizeof_uint64_t=8 +ac_cv_sizeof_unsigned_int=4 +ac_cv_sizeof_unsigned_long=4 +ac_cv_sizeof_unsigned_short=2 +ac_cv_sizeof_void_p=4 diff --git a/include/site/m68k-openwrt-linux-gnu b/include/site/m68k-openwrt-linux-gnu new file mode 100644 index 0000000..69c51d5 --- /dev/null +++ b/include/site/m68k-openwrt-linux-gnu @@ -0,0 +1,5 @@ +#!/bin/sh + +. $TOPDIR/include/site/m68k-linux +. $TOPDIR/include/site/linux-gnu + diff --git a/include/site/m68k-openwrt-linux-uclibc b/include/site/m68k-openwrt-linux-uclibc new file mode 100644 index 0000000..69c51d5 --- /dev/null +++ b/include/site/m68k-openwrt-linux-uclibc @@ -0,0 +1,5 @@ +#!/bin/sh + +. $TOPDIR/include/site/m68k-linux +. $TOPDIR/include/site/linux-gnu + diff --git a/include/target.mk b/include/target.mk index 8769c30..7facaee 100644 --- a/include/target.mk +++ b/include/target.mk @@ -162,6 +162,7 @@ ifeq ($(DUMP),1) endif DEFAULT_CFLAGS_i386=-O2 -pipe -march=i486 -funit-at-a-time DEFAULT_CFLAGS_x86_64=-O2 -pipe -march=athlon64 -funit-at-a-time + DEFAULT_CFLAGS_m68k=-Os -pipe -mcfv4e -funit-at-a-time DEFAULT_CFLAGS_mips=-Os -pipe -mips32 -mtune=mips32 -funit-at-a-time DEFAULT_CFLAGS_mipsel=$(DEFAULT_CFLAGS_mips) DEFAULT_CFLAGS_mips64=-Os -pipe -mips64 -mtune=mips64 -mabi=64 -funit-at-a-time diff --git a/package/base-files/Makefile b/package/base-files/Makefile index f9ad4e7..69f1e77 100644 --- a/package/base-files/Makefile +++ b/package/base-files/Makefile @@ -74,7 +74,7 @@ endef define Package/libgcc $(call Package/gcc/Default) TITLE:=GCC support library - DEPENDS+=@!TARGET_avr32 + DEPENDS+=@!(TARGET_avr32||TARGET_coldfire) endef define Package/libssp diff --git a/target/Config.in b/target/Config.in index 37c9e20..8bfeb83 100644 --- a/target/Config.in +++ b/target/Config.in @@ -61,6 +61,10 @@ config i386 config i686 bool +config m68k + select BIG_ENDIAN + bool + config mips select BIG_ENDIAN bool diff --git a/target/linux/coldfire/Makefile b/target/linux/coldfire/Makefile new file mode 100644 index 0000000..0d29634 --- /dev/null +++ b/target/linux/coldfire/Makefile @@ -0,0 +1,23 @@ +# +# Copyright (C) 2009 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +include $(TOPDIR)/rules.mk + +ARCH:=m68k +BOARD:=coldfire +BOARDNAME:=Freescale Coldfire v4e +FEATURES:=squashfs broken + +LINUX_VERSION:=2.6.25.20 +LINUX_KARCH:=m68k + +include $(INCLUDE_DIR)/target.mk + +define Target/Description + Build firmware images for ColdFire v4e boards +endef + +$(eval $(call BuildTarget)) diff --git a/target/linux/coldfire/config-default b/target/linux/coldfire/config-default new file mode 100644 index 0000000..07014f3 --- /dev/null +++ b/target/linux/coldfire/config-default @@ -0,0 +1,109 @@ +# CONFIG_8139TOO is not set +# CONFIG_ADVANCED is not set +# CONFIG_AMIGA is not set +# CONFIG_APOLLO is not set +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_AOUT=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_ATARI is not set +CONFIG_BASE_SMALL=0 +# CONFIG_BINFMT_AOUT is not set +CONFIG_BITREVERSE=y +# CONFIG_BOOTPARAM is not set +CONFIG_BOUNCE=y +CONFIG_CFV4E=y +CONFIG_CLASSIC_RCU=y +CONFIG_COLDFIRE=y +# CONFIG_COLDFIRE_EDMA is not set +# CONFIG_COLDFIRE_WATCHDOG is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DISCONTIGMEM=y +CONFIG_DISCONTIGMEM_MANUAL=y +CONFIG_FEC_548x=y +CONFIG_FEC_548x_AUTO_NEGOTIATION=y +CONFIG_FEC_548x_ENABLE_FEC2=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_GENERIC_IOMAP=y +# CONFIG_GENERIC_TIME is not set +# CONFIG_GEN_RTC is not set +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAVE_IDE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_OPROFILE is not set +# CONFIG_HP300 is not set +CONFIG_HW_RANDOM=y +# CONFIG_I2C is not set +# CONFIG_IDE is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_LEDS_ALIX is not set +# CONFIG_M5445X is not set +# CONFIG_M5475AFE is not set +# CONFIG_M5475BFE is not set +# CONFIG_M5475CFE is not set +# CONFIG_M5475DFE is not set +# CONFIG_M5475EFE is not set +# CONFIG_M5475FFE is not set +# CONFIG_M547X is not set +CONFIG_M547X_8X=y +# CONFIG_M5485AFE is not set +# CONFIG_M5485BFE is not set +CONFIG_M5485CFE=y +# CONFIG_M5485DFE is not set +# CONFIG_M5485EFE is not set +# CONFIG_M5485FFE is not set +CONFIG_M548X=y +# CONFIG_M68020 is not set +# CONFIG_M68030 is not set +# CONFIG_M68040 is not set +# CONFIG_M68060 is not set +CONFIG_M68K=y +# CONFIG_M68KFPU_EMU is not set +# CONFIG_MAC is not set +CONFIG_MCD_DMA=y +CONFIG_MCFCLK=200000000 +CONFIG_MCF_USER_HALT=y +# CONFIG_MEMSTICK is not set +CONFIG_MMU_CFV4E=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +# CONFIG_MTD_CFI_GEOMETRY is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NET_VENDOR_3COM is not set +CONFIG_NODES_SHIFT=3 +CONFIG_NOR_FLASH_BASE=0xE0000000 +# CONFIG_NO_DMA is not set +# CONFIG_NO_IOPORT is not set +CONFIG_PCI_LEGACY=y +CONFIG_PCI=y +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_PROC_HARDWARE is not set +# CONFIG_Q40 is not set +# CONFIG_R6040 is not set +CONFIG_RESOURCES_64BIT=y +# CONFIG_SCSI_DMA is not set +CONFIG_SDRAM_BASE=0x00000000 +CONFIG_SDRAM_SIZE=0x04000000 +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +# CONFIG_SERIAL_8250_RSA is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_COLDFIRE is not set +# CONFIG_SERIAL_MCF is not set +CONFIG_SLABINFO=y +# CONFIG_SUN3 is not set +# CONFIG_SUN3X is not set +CONFIG_TIME_LOW_RES=y +CONFIG_UID16=y +# CONFIG_VGASTATE is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_VME is not set diff --git a/target/linux/coldfire/image/Makefile b/target/linux/coldfire/image/Makefile new file mode 100644 index 0000000..5eb5c2f --- /dev/null +++ b/target/linux/coldfire/image/Makefile @@ -0,0 +1,29 @@ +# +# Copyright (C) 2009 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +include $(TOPDIR)/rules.mk +include $(INCLUDE_DIR)/image.mk + +JFFS2_BLOCKSIZE=128k + +define Image/Prepare +endef + +define Image/BuildKernel +endef + +define Image/Build + $(call Image/Build/$(1),$(1)) +endef + +define Image/Build/jffs2-128k +endef + +define Image/Build/squashfs + $(call prepare_generic_squashfs,$(KDIR)/root.squashfs) +endef + +$(eval $(call BuildImage)) diff --git a/target/linux/coldfire/patches/001-cf.patch b/target/linux/coldfire/patches/001-cf.patch new file mode 100644 index 0000000..66417e7 --- /dev/null +++ b/target/linux/coldfire/patches/001-cf.patch @@ -0,0 +1,51053 @@ +--- /dev/null ++++ b/arch/m68k/coldfire/cache.c +@@ -0,0 +1,43 @@ ++/* ++ * linux/arch/m68k/coldfire/cache.c ++ * ++ * Matt Waddel Matt.Waddel@freescale.com ++ * Kurt Mahan kmahan@freescale.com ++ * Copyright Freescale Semiconductor, Inc. 2007 ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++ ++#include <linux/interrupt.h> ++#include <asm/cfcache.h> ++#include <asm/coldfire.h> ++#include <asm/system.h> ++ ++/* Cache Control Reg shadow reg */ ++unsigned long shadow_cacr; ++ ++/** ++ * cacr_set - Set the Cache Control Register ++ * @x Value to set ++ */ ++void cacr_set(unsigned long x) ++{ ++ shadow_cacr = x; ++ ++ __asm__ __volatile__ ("movec %0, %%cacr" ++ : /* no outputs */ ++ : "r" (shadow_cacr)); ++} ++ ++/** ++ * cacr_get - Get the current value of the Cache Control Register ++ * ++ * @return CACR value ++ */ ++unsigned long cacr_get(void) ++{ ++ return shadow_cacr; ++} +--- /dev/null ++++ b/arch/m68k/coldfire/config.c +@@ -0,0 +1,483 @@ ++/* ++ * linux/arch/m68k/coldfire/config.c ++ * ++ * Kurt Mahan kmahan@freescale.com ++ * Matt Waddel Matt.Waddel@freescale.com ++ * Copyright Freescale Semiconductor, Inc. 2007, 2008 ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++ ++#include <linux/module.h> ++#include <linux/init.h> ++#include <linux/string.h> ++#include <linux/kernel.h> ++#include <linux/console.h> ++#include <linux/bootmem.h> ++#include <linux/mm.h> ++#include <asm/bootinfo.h> ++#include <asm/machdep.h> ++#include <asm/coldfire.h> ++#include <asm/cfcache.h> ++#include <asm/cacheflush.h> ++#include <asm/io.h> ++#include <asm/cfmmu.h> ++#include <asm/setup.h> ++#include <asm/irq.h> ++#include <asm/traps.h> ++#include <asm/movs.h> ++#include <asm/movs.h> ++#include <asm/page.h> ++#include <asm/pgalloc.h> ++ ++#include <asm/mcfsim.h> ++ ++#if defined(CONFIG_M5445X) ++#define UBOOT_EXTRA_CLOCKS ++#elif defined(CONFIG_M547X_8X) ++#define UBOOT_PCI ++#endif ++#include <asm/bootinfo.h> ++ ++#ifdef CONFIG_M5445X ++#include <asm/mcf5445x_intc.h> ++#include <asm/mcf5445x_sdramc.h> ++#include <asm/mcf5445x_fbcs.h> ++#include <asm/mcf5445x_dtim.h> ++#include <asm/mcf5445x_xbs.h> ++#endif ++ ++#ifdef CONFIG_M547X_8X ++#include <asm/m5485gpt.h> ++#endif ++ ++extern int get_irq_list(struct seq_file *p, void *v); ++extern char _text, _end; ++extern char _etext, _edata, __init_begin, __init_end; ++extern struct console mcfrs_console; ++extern char m68k_command_line[CL_SIZE]; ++extern unsigned long availmem; ++ ++static int irq_enable[NR_IRQS]; ++unsigned long num_pages; ++ ++/* ethernet mac addresses from uboot */ ++unsigned char uboot_enet0[6]; ++unsigned char uboot_enet1[6]; ++ ++void coldfire_sort_memrec(void) ++{ ++ int i, j; ++ ++ /* Sort the m68k_memory records by address */ ++ for (i = 0; i < m68k_num_memory; ++i) { ++ for (j = i + 1; j < m68k_num_memory; ++j) { ++ if (m68k_memory[i].addr > m68k_memory[j].addr) { ++ struct mem_info tmp; ++ tmp = m68k_memory[i]; ++ m68k_memory[i] = m68k_memory[j]; ++ m68k_memory[j] = tmp; ++ } ++ } ++ } ++ /* Trim off discontiguous bits */ ++ for (i = 1; i < m68k_num_memory; ++i) { ++ if ((m68k_memory[i-1].addr + m68k_memory[i-1].size) != ++ m68k_memory[i].addr) { ++ printk(KERN_DEBUG "m68k_parse_bootinfo: addr gap between \ ++ 0x%lx & 0x%lx\n", ++ m68k_memory[i-1].addr+m68k_memory[i-1].size, ++ m68k_memory[i].addr); ++ m68k_num_memory = i; ++ break; ++ } ++ } ++} ++ ++/* ++ * UBoot Handler ++ */ ++int __init uboot_commandline(char *bootargs) ++{ ++ int len = 0, cmd_line_len; ++ static struct uboot_record uboot_info; ++ u32 offset = PAGE_OFFSET_RAW - PHYS_OFFSET; ++ ++ extern unsigned long uboot_info_stk; ++ ++ /* validate address */ ++ if ((uboot_info_stk < PAGE_OFFSET_RAW) || ++ (uboot_info_stk >= (PAGE_OFFSET_RAW + CONFIG_SDRAM_SIZE))) ++ return 0; ++ ++ /* Add offset to get post-remapped kernel memory location */ ++ uboot_info.bdi = (struct bd_info *)((*(u32 *)(uboot_info_stk)) + offset); ++ uboot_info.initrd_start = (*(u32 *)(uboot_info_stk+4)) + offset; ++ uboot_info.initrd_end = (*(u32 *)(uboot_info_stk+8)) + offset; ++ uboot_info.cmd_line_start = (*(u32 *)(uboot_info_stk+12)) + offset; ++ uboot_info.cmd_line_stop = (*(u32 *)(uboot_info_stk+16)) + offset; ++ ++ /* copy over mac addresses */ ++ memcpy(uboot_enet0, uboot_info.bdi->bi_enet0addr, 6); ++ memcpy(uboot_enet1, uboot_info.bdi->bi_enet1addr, 6); ++ ++ /* copy command line */ ++ cmd_line_len = uboot_info.cmd_line_stop - uboot_info.cmd_line_start; ++ if ((cmd_line_len > 0) && (cmd_line_len < CL_SIZE-1)) ++ len = (int)strncpy(bootargs, (char *)uboot_info.cmd_line_start,\ ++ cmd_line_len); ++ ++ return len; ++} ++ ++/* ++ * This routine does things not done in the bootloader. ++ */ ++#if defined(CONFIG_M54451) ++#define DEFAULT_COMMAND_LINE "debug root=/dev/nfs rw nfsroot=172.27.155.1:/tftpboot/redstripe/rootfs/ ip=172.27.155.51:172.27.155.1" ++#elif defined(CONFIG_M54455) ++#define MTD_DEFAULT_COMMAND_LINE "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)" ++#define DEFAULT_COMMAND_LINE "debug root=/dev/nfs rw nfsroot=172.27.155.1:/tftpboot/redstripe/rootfs/ ip=172.27.155.55:172.27.155.1" ++#elif defined(CONFIG_M547X_8X) ++#define DEFAULT_COMMAND_LINE "debug root=/dev/nfs rw nfsroot=172.27.155.1:/tftpboot/rigo/rootfs/ ip=172.27.155.75:172.27.155.1" ++#endif ++asmlinkage void __init cf_early_init(void) ++{ ++ struct bi_record *record = (struct bi_record *) &_end; ++ ++ extern char _end; ++ ++#if defined(CONFIG_M5445X) ++ SET_VBR((void *)MCF_RAMBAR1); ++#elif defined(CONFIG_M547X_8X) ++ SET_VBR((void *)MCF_RAMBAR0); ++#endif ++ ++ /* Mask all interrupts */ ++#if defined(CONFIG_M5445X) ++ MCF_INTC0_IMRL = 0xFFFFFFFF; ++ MCF_INTC0_IMRH = 0xFFFFFFFF; ++ MCF_INTC1_IMRL = 0xFFFFFFFF; ++ MCF_INTC1_IMRH = 0xFFFFFFFF; ++#elif defined(CONFIG_M547X_8X) ++ MCF_IMRL = 0xFFFFFFFF; ++ MCF_IMRH = 0xFFFFFFFF; ++#endif ++ ++#if defined(CONFIG_M5445X) ++#if defined(CONFIG_NOR_FLASH_BASE) ++ MCF_FBCS_CSAR(1) = CONFIG_NOR_FLASH_BASE; ++#else ++ MCF_FBCS_CSAR(1) = 0x00000000; ++#endif ++ ++#if CONFIG_SDRAM_SIZE > (256*1024*1024) ++ /* Init optional SDRAM chip select */ ++ MCF_SDRAMC_SDCS(1) = (256*1024*1024) | 0x1B; ++#endif ++#endif /* CONFIG_M5445X */ ++ ++#if defined(CONFIG_M5445X) ++ /* Setup SDRAM crossbar(XBS) priorities */ ++ MCF_XBS_PRS2 = (MCF_XBS_PRS_M0(MCF_XBS_PRI_2) | ++ MCF_XBS_PRS_M1(MCF_XBS_PRI_3) | ++ MCF_XBS_PRS_M2(MCF_XBS_PRI_4) | ++ MCF_XBS_PRS_M3(MCF_XBS_PRI_5) | ++ MCF_XBS_PRS_M5(MCF_XBS_PRI_6) | ++ MCF_XBS_PRS_M6(MCF_XBS_PRI_1) | ++ MCF_XBS_PRS_M7(MCF_XBS_PRI_7)); ++#endif ++ ++ m68k_machtype = MACH_CFMMU; ++ m68k_fputype = FPU_CFV4E; ++ m68k_mmutype = MMU_CFV4E; ++ m68k_cputype = CPU_CFV4E; ++ ++ m68k_num_memory = 0; ++ m68k_memory[m68k_num_memory].addr = CONFIG_SDRAM_BASE; ++ m68k_memory[m68k_num_memory++].size = CONFIG_SDRAM_SIZE; ++ ++ if (!uboot_commandline(m68k_command_line)) { ++#if defined(CONFIG_BOOTPARAM) ++ strncpy(m68k_command_line, CONFIG_BOOTPARAM_STRING, CL_SIZE-1); ++#else ++ strcpy(m68k_command_line, DEFAULT_COMMAND_LINE); ++#endif ++ } ++ ++#if defined(CONFIG_BLK_DEV_INITRD) ++ /* add initrd image */ ++ record = (struct bi_record *) ((void *)record + record->size); ++ record->tag = BI_RAMDISK; ++ record->size = sizeof(record->tag) + sizeof(record->size) ++ + sizeof(record->data[0]) + sizeof(record->data[1]); ++#endif ++ ++ /* Mark end of tags. */ ++ record = (struct bi_record *) ((void *) record + record->size); ++ record->tag = 0; ++ record->data[0] = 0; ++ record->data[1] = 0; ++ record->size = sizeof(record->tag) + sizeof(record->size) ++ + sizeof(record->data[0]) + sizeof(record->data[1]); ++ ++ /* Invalidate caches via CACR */ ++ flush_bcache(); ++ cacr_set(CACHE_DISABLE_MODE); ++ ++ /* Turn on caches via CACR, enable EUSP */ ++ cacr_set(CACHE_INITIAL_MODE); ++ ++} ++ ++#if defined(CONFIG_M5445X) ++void settimericr(unsigned int timer, unsigned int level) ++{ ++ volatile unsigned char *icrp; ++ unsigned int icr; ++ unsigned char irq; ++ ++ if (timer <= 2) { ++ switch (timer) { ++ case 2: irq = 33; icr = MCFSIM_ICR_TIMER2; break; ++ default: irq = 32; icr = MCFSIM_ICR_TIMER1; break; ++ } ++ ++ icrp = (volatile unsigned char *) (icr); ++ *icrp = level; ++ coldfire_enable_irq0(irq); ++ } ++} ++#endif ++ ++/* Assembler routines */ ++asmlinkage void buserr(void); ++asmlinkage void trap(void); ++asmlinkage void system_call(void); ++asmlinkage void inthandler(void); ++ ++void __init coldfire_trap_init(void) ++{ ++ int i = 0; ++ e_vector *vectors; ++ ++#if defined(CONFIG_M5445X) ++ vectors = (e_vector *)MCF_RAMBAR1; ++#elif defined(CONFIG_M547X_8X) ++ vectors = (e_vector *)MCF_RAMBAR0; ++#endif ++ /* ++ * There is a common trap handler and common interrupt ++ * handler that handle almost every vector. We treat ++ * the system call and bus error special, they get their ++ * own first level handlers. ++ */ ++ for (i = 3; (i <= 23); i++) ++ vectors[i] = trap; ++ for (i = 33; (i <= 63); i++) ++ vectors[i] = trap; ++ for (i = 24; (i <= 31); i++) ++ vectors[i] = inthandler; ++ for (i = 64; (i < 255); i++) ++ vectors[i] = inthandler; ++ ++ vectors[255] = 0; ++ vectors[2] = buserr; ++ vectors[32] = system_call; ++} ++ ++#if defined(CONFIG_M5445X) ++ ++void coldfire_tick(void) ++{ ++ /* Reset the ColdFire timer */ ++ __raw_writeb(MCF_DTIM_DTER_CAP | MCF_DTIM_DTER_REF, MCF_DTIM0_DTER); ++} ++ ++void __init coldfire_sched_init(irq_handler_t handler) ++{ ++ unsigned int mcf_timerlevel = 5; ++ unsigned int mcf_timervector = 64+32; ++ ++ __raw_writew(MCF_DTIM_DTMR_RST_RST, MCF_DTIM0_DTMR); ++ __raw_writel(((MCF_BUSCLK / 16) / HZ), MCF_DTIM0_DTRR); ++ __raw_writew(MCF_DTIM_DTMR_ORRI | MCF_DTIM_DTMR_CLK_DIV16 | ++ MCF_DTIM_DTMR_FRR | MCF_DTIM_DTMR_RST_EN, \ ++ MCF_DTIM0_DTMR); ++ ++ request_irq(mcf_timervector, handler, IRQF_DISABLED, \ ++ "timer", (void *)MCF_DTIM0_DTMR); ++ ++ settimericr(1, mcf_timerlevel); ++} ++ ++int timerirqpending(int timer) ++{ ++ unsigned int imr = 0; ++ ++ switch (timer) { ++ case 1: imr = 0x1; break; ++ case 2: imr = 0x2; break; ++ default: break; ++ } ++ ++ return (getiprh() & imr); ++} ++ ++unsigned long coldfire_gettimeoffset(void) ++{ ++ volatile unsigned long trr, tcn, offset; ++ ++ tcn = __raw_readw(MCF_DTIM0_DTCN); ++ trr = __raw_readl(MCF_DTIM0_DTRR); ++ offset = (tcn * (1000000 / HZ)) / trr; ++ ++ /* Check if we just wrapped the counters and maybe missed a tick */ ++ if ((offset < (1000000 / HZ / 2)) && timerirqpending(1)) ++ offset += 1000000 / HZ; ++ return offset; ++} ++ ++#elif defined(CONFIG_M547X_8X) ++ ++void coldfire_tick(void) ++{ ++ /* Reset the ColdFire timer */ ++ MCF_SSR(0) = MCF_SSR_ST; ++} ++ ++void __init coldfire_sched_init(irq_handler_t handler) ++{ ++ int irq = ISC_SLTn(0); ++ ++ MCF_SCR(0) = 0; ++ MCF_ICR(irq) = ILP_SLT0; ++ request_irq(64 + irq, handler, IRQF_DISABLED, "ColdFire Timer 0", NULL); ++ MCF_SLTCNT(0) = MCF_BUSCLK / HZ; ++ MCF_SCR(0) |= MCF_SCR_TEN | MCF_SCR_IEN | MCF_SCR_RUN; ++} ++ ++unsigned long coldfire_gettimeoffset(void) ++{ ++ volatile unsigned long trr, tcn, offset; ++ trr = MCF_SLTCNT(0); ++ tcn = MCF_SCNT(0); ++ ++ offset = (trr - tcn) * ((1000000 >> 3) / HZ) / (trr >> 3); ++ if (MCF_SSR(0) & MCF_SSR_ST) ++ offset += 1000000 / HZ; ++ ++ return offset; ++} ++ ++#endif ++ ++void coldfire_reboot(void) ++{ ++#if defined(CONFIG_M5445X) ++ /* disable interrupts and do a software reset */ ++ asm("movew #0x2700, %%sr\n\t" ++ "moveb #0x80, %%d0\n\t" ++ "moveb %%d0, 0xfc0a0000\n\t" ++ : : : "%d0"); ++#elif defined(CONFIG_M547X_8X) ++ /* disable interrupts and enable the watchdog */ ++ printk(KERN_INFO "Rebooting\n"); ++ asm("movew #0x2700, %sr\n"); ++ MCF_GPT_GMS0 = MCF_GPT_GMS_WDEN | MCF_GPT_GMS_CE | MCF_GPT_GMS_TMS(4); ++#endif ++} ++ ++static void coldfire_get_model(char *model) ++{ ++ sprintf(model, "Version 4 ColdFire"); ++} ++ ++static void __init ++coldfire_bootmem_alloc(unsigned long memory_start, unsigned long memory_end) ++{ ++ unsigned long base_pfn; ++ ++ /* compute total pages in system */ ++ num_pages = PAGE_ALIGN(memory_end - PAGE_OFFSET) >> PAGE_SHIFT; ++ ++ /* align start/end to page boundries */ ++ memory_start = PAGE_ALIGN(memory_start); ++ memory_end = memory_end & PAGE_MASK; ++ ++ /* page numbers */ ++ base_pfn = __pa(PAGE_OFFSET) >> PAGE_SHIFT; ++ min_low_pfn = __pa(memory_start) >> PAGE_SHIFT; ++ max_low_pfn = __pa(memory_end) >> PAGE_SHIFT; ++ ++ high_memory = (void *)memory_end; ++ availmem = memory_start; ++ ++ /* setup bootmem data */ ++ m68k_setup_node(0); ++ availmem += init_bootmem_node(NODE_DATA(0), min_low_pfn, ++ base_pfn, max_low_pfn); ++ availmem = PAGE_ALIGN(availmem); ++ free_bootmem(__pa(availmem), memory_end - (availmem)); ++} ++ ++void __init config_coldfire(void) ++{ ++ unsigned long endmem, startmem; ++ int i; ++ ++ /* ++ * Calculate endmem from m68k_memory, assume all are contiguous ++ */ ++ startmem = ((((int) &_end) + (PAGE_SIZE - 1)) & PAGE_MASK); ++ endmem = PAGE_OFFSET; ++ for (i = 0; i < m68k_num_memory; ++i) ++ endmem += m68k_memory[i].size; ++ ++ printk(KERN_INFO "starting up linux startmem 0x%lx, endmem 0x%lx, \ ++ size %luMB\n", startmem, endmem, (endmem - startmem) >> 20); ++ ++ memset(irq_enable, 0, sizeof(irq_enable)); ++ ++ /* ++ * Setup coldfire mach-specific handlers ++ */ ++ mach_max_dma_address = 0xffffffff; ++ mach_sched_init = coldfire_sched_init; ++ mach_tick = coldfire_tick; ++ mach_gettimeoffset = coldfire_gettimeoffset; ++ mach_reset = coldfire_reboot; ++/* mach_hwclk = coldfire_hwclk; to be done */ ++ mach_get_model = coldfire_get_model; ++ ++ coldfire_bootmem_alloc(startmem, endmem-1); ++ ++ /* ++ * initrd setup ++ */ ++/* #ifdef CONFIG_BLK_DEV_INITRD ++ if (m68k_ramdisk.size) { ++ reserve_bootmem (__pa(m68k_ramdisk.addr), m68k_ramdisk.size); ++ initrd_start = (unsigned long) m68k_ramdisk.addr; ++ initrd_end = initrd_start + m68k_ramdisk.size; ++ printk (KERN_DEBUG "initrd: %08lx - %08lx\n", initrd_start, ++ initrd_end); ++ } ++#endif */ ++ ++#if defined(CONFIG_DUMMY_CONSOLE) || defined(CONFIG_FRAMEBUFFER_CONSOLE) ++ conswitchp = &dummy_con; ++#endif ++ ++#if defined(CONFIG_SERIAL_COLDFIRE) ++ /* ++ * This causes trouble when it is re-registered later. ++ * Currently this is fixed by conditionally commenting ++ * out the register_console in mcf_serial.c ++ */ ++ register_console(&mcfrs_console); ++#endif ++} +--- /dev/null ++++ b/arch/m68k/coldfire/entry.S +@@ -0,0 +1,711 @@ ++/* ++ * arch/m68k/coldfire/entry.S ++ * ++ * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com) ++ * Copyright (C) 1998 D. Jeff Dionne <jeff@lineo.ca>, ++ * Kenneth Albanowski <kjahds@kjahds.com>, ++ * Copyright (C) 2000 Lineo Inc. (www.lineo.com) ++ * Copyright (C) 2004-2006 Macq Electronique SA. (www.macqel.com) ++ * Matt Waddel Matt.Waddel@freescale.com ++ * Kurt Mahan kmahan@freescale.com ++ * Copyright Freescale Semiconductor, Inc. 2007 ++ * ++ * Modify irq status in buserr -- (c) Copyright 2008, SYSTEM electronic Gmbh ++ * ++ * Based on: ++ * ++ * arch/m68knommu/platform/5307/entry.S & ++ * arch/m68k/kernel/entry.S ++ * ++ * Copyright (C) 1991, 1992 Linus Torvalds ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file README.legal in the main directory of this archive ++ * for more details. ++ * ++ * Linux/m68k support by Hamish Macdonald ++ * ++ * ColdFire support by Greg Ungerer (gerg@snapgear.com) ++ * 5307 fixes by David W. Miller ++ * linux 2.4 support David McCullough <davidm@snapgear.com> ++ * Bug, speed and maintainability fixes by Philippe De Muyter <phdm@macqel.be> ++ * Ported to mmu Coldfire by Matt Waddel ++ */ ++ ++#include <linux/sys.h> ++#include <linux/linkage.h> ++#include <asm/cf_entry.h> ++#include <asm/errno.h> ++#include <asm/setup.h> ++#include <asm/segment.h> ++#include <asm/traps.h> ++#include <asm/unistd.h> ++ ++/* ++ * TASK_INFO: ++ * ++ * - TINFO_PREEMPT (struct thread_info / preempt_count) ++ * Used to keep track of preemptability ++ * - TINFO_FLAGS (struct thread_info / flags - include/asm-m68k/thread_info.h) ++ * Various bit flags that are checked for scheduling/tracing ++ * Bits 0-7 are checked every exception exit ++ * 8-15 are checked every syscall exit ++ * ++ * TIF_SIGPENDING 6 ++ * TIF_NEED_RESCHED 7 ++ * TIF_DELAYED_TRACE 14 ++ * TIF_SYSCALL_TRACE 15 ++ * TIF_MEMDIE 16 (never checked here) ++ */ ++ ++.bss ++ ++sw_ksp: ++.long 0 ++ ++sw_usp: ++.long 0 ++ ++.text ++ ++.globl system_call ++.globl buserr ++.globl trap ++.globl resume ++.globl ret_from_exception ++.globl ret_from_signal ++.globl sys_call_table ++.globl ret_from_interrupt ++.globl inthandler ++ ++ENTRY(buserr) ++#ifdef CONFIG_COLDFIRE_FOO ++ movew #0x2700,%sr /* lock interrupts */ ++#endif ++ SAVE_ALL_INT ++#ifdef CONFIG_COLDFIRE_FOO ++ movew PT_SR(%sp),%d3 /* get original %sr */ ++ oril #0x2000,%d3 /* set supervisor mode in it */ ++ movew %d3,%sr /* recover irq state */ ++#endif ++ GET_CURRENT(%d0) ++ movel %sp,%sp@- /* stack frame pointer argument */ ++ jsr buserr_c ++ addql #4,%sp ++ jra .Lret_from_exception ++ ++ENTRY(trap) ++ SAVE_ALL_INT ++ GET_CURRENT(%d0) ++ movel %sp,%sp@- /* stack frame pointer argument */ ++ jsr trap_c ++ addql #4,%sp ++ jra .Lret_from_exception ++ ++ /* After a fork we jump here directly from resume, ++ %d1 contains the previous task schedule_tail */ ++ENTRY(ret_from_fork) ++ movel %d1,%sp@- ++ jsr schedule_tail ++ addql #4,%sp ++ jra .Lret_from_exception ++ ++do_trace_entry: ++ movel #-ENOSYS,%d1 /* needed for strace */ ++ movel %d1,%sp@(PT_D0) ++ subql #4,%sp ++ SAVE_SWITCH_STACK ++ jbsr syscall_trace ++ RESTORE_SWITCH_STACK ++ addql #4,%sp ++ movel %sp@(PT_ORIG_D0),%d0 ++ cmpl #NR_syscalls,%d0 ++ jcs syscall ++badsys: ++ movel #-ENOSYS,%d1 ++ movel %d1,%sp@(PT_D0) ++ jra ret_from_exception ++ ++do_trace_exit: ++ subql #4,%sp ++ SAVE_SWITCH_STACK ++ jbsr syscall_trace ++ RESTORE_SWITCH_STACK ++ addql #4,%sp ++ jra .Lret_from_exception ++ ++ENTRY(ret_from_signal) ++ RESTORE_SWITCH_STACK ++ addql #4,%sp ++ jra .Lret_from_exception ++ ++ENTRY(system_call) ++ SAVE_ALL_SYS ++ ++ GET_CURRENT(%d1) ++ /* save top of frame */ ++ movel %sp,%curptr@(TASK_THREAD+THREAD_ESP0) ++ ++ /* syscall trace */ ++ tstb %curptr@(TASK_INFO+TINFO_FLAGS+2) ++ jmi do_trace_entry /* SYSCALL_TRACE is set */ ++ cmpl #NR_syscalls,%d0 ++ jcc badsys ++syscall: ++ movel #sys_call_table,%a0 ++ asll #2,%d0 ++ addl %d0,%a0 ++ movel %a0@,%a0 ++ jsr %a0@ ++ movel %d0,%sp@(PT_D0) /* save the return value */ ++ret_from_syscall: ++ movew %curptr@(TASK_INFO+TINFO_FLAGS+2),%d0 ++ jne syscall_exit_work /* flags set so process */ ++1: RESTORE_ALL ++ ++syscall_exit_work: ++ btst #5,%sp@(PT_SR) /* check if returning to kernel */ ++ bnes 1b /* if so, skip resched, signals */ ++ ++ btstl #15,%d0 /* check if SYSCALL_TRACE */ ++ jne do_trace_exit ++ btstl #14,%d0 /* check if DELAYED_TRACE */ ++ jne do_delayed_trace ++ btstl #6,%d0 /* check if SIGPENDING */ ++ jne do_signal_return ++ pea resume_userspace ++ jra schedule ++ ++ENTRY(ret_from_exception) ++.Lret_from_exception: ++ btst #5,%sp@(PT_SR) /* check if returning to kernel */ ++ bnes 1f /* if so, skip resched, signals */ ++ movel %d0,%sp@- /* Only allow interrupts when we are */ ++ move %sr,%d0 /* last one on the kernel stack, */ ++ andl #ALLOWINT,%d0 /* otherwise stack overflow can occur */ ++ move %d0,%sr /* during heavy interrupt load. */ ++ movel %sp@+,%d0 ++ ++resume_userspace: ++ moveb %curptr@(TASK_INFO+TINFO_FLAGS+3),%d0 ++ jne exit_work /* SIGPENDING and/or NEED_RESCHED set */ ++1: RESTORE_ALL ++ ++exit_work: ++ /* save top of frame */ ++ movel %sp,%curptr@(TASK_THREAD+THREAD_ESP0) ++ btstl #6,%d0 /* check for SIGPENDING in flags */ ++ jne do_signal_return ++ pea resume_userspace ++ jra schedule ++ ++do_signal_return: ++ subql #4,%sp /* dummy return address */ ++ SAVE_SWITCH_STACK ++ pea %sp@(SWITCH_STACK_SIZE) ++ clrl %sp@- ++ bsrl do_signal ++ addql #8,%sp ++ RESTORE_SWITCH_STACK ++ addql #4,%sp ++ jbra resume_userspace ++ ++do_delayed_trace: ++ bclr #7,%sp@(PT_SR) /* clear trace bit in SR */ ++ pea 1 /* send SIGTRAP */ ++ movel %curptr,%sp@- ++ pea LSIGTRAP ++ jbsr send_sig ++ addql #8,%sp ++ addql #4,%sp ++ jbra resume_userspace ++ ++/* ++ * This is the interrupt handler (for all hardware interrupt ++ * sources). It figures out the vector number and calls the appropriate ++ * interrupt service routine directly. ++ */ ++ENTRY(inthandler) ++ SAVE_ALL_INT ++ GET_CURRENT(%d0) ++ addql #1,%curptr@(TASK_INFO+TINFO_PREEMPT) ++ /* put exception # in d0 */ ++ movel %sp@(PT_VECTOR),%d0 ++ swap %d0 /* extract bits 25:18 */ ++ lsrl #2,%d0 ++ andl #0x0ff,%d0 ++ ++ movel %sp,%sp@- ++ movel %d0,%sp@- /* put vector # on stack */ ++auto_irqhandler_fixup = . + 2 ++ jbsr process_int /* process the IRQ */ ++ addql #8,%sp /* pop parameters off stack */ ++ ++ENTRY(ret_from_interrupt) ++ret_from_interrupt: ++ ++ subql #1,%curptr@(TASK_INFO+TINFO_PREEMPT) ++ jeq ret_from_last_interrupt ++2: RESTORE_ALL ++ ++ ALIGN ++ret_from_last_interrupt: ++ moveb %sp@(PT_SR),%d0 ++ andl #(~ALLOWINT>>8)&0xff,%d0 ++ jne 2b ++ ++ /* check if we need to do software interrupts */ ++ tstl irq_stat+CPUSTAT_SOFTIRQ_PENDING ++ jeq .Lret_from_exception ++ pea ret_from_exception ++ jra do_softirq ++ ++ENTRY(user_inthandler) ++ SAVE_ALL_INT ++ GET_CURRENT(%d0) ++ addql #1,%curptr@(TASK_INFO+TINFO_PREEMPT) ++ /* put exception # in d0 */ ++ movel %sp@(PT_VECTOR),%d0 ++user_irqvec_fixup = . + 2 ++ swap %d0 /* extract bits 25:18 */ ++ lsrl #2,%d0 ++ andl #0x0ff,%d0 ++ ++ movel %sp,%sp@- ++ movel %d0,%sp@- /* put vector # on stack */ ++user_irqhandler_fixup = . + 2 ++ jbsr process_int /* process the IRQ */ ++ addql #8,%sp /* pop parameters off stack */ ++ ++ subql #1,%curptr@(TASK_INFO+TINFO_PREEMPT) ++ jeq ret_from_last_interrupt ++ RESTORE_ALL ++ ++/* Handler for uninitialized and spurious interrupts */ ++ ++ENTRY(bad_inthandler) ++ SAVE_ALL_INT ++ GET_CURRENT(%d0) ++ addql #1,%curptr@(TASK_INFO+TINFO_PREEMPT) ++ ++ movel %sp,%sp@- ++ jsr handle_badint ++ addql #4,%sp ++ ++ subql #1,%curptr@(TASK_INFO+TINFO_PREEMPT) ++ jeq ret_from_last_interrupt ++ RESTORE_ALL ++ ++ENTRY(sys_fork) ++ SAVE_SWITCH_STACK ++ pea %sp@(SWITCH_STACK_SIZE) ++ jbsr m68k_fork ++ addql #4,%sp ++ RESTORE_SWITCH_STACK ++ rts ++ ++ENTRY(sys_clone) ++ SAVE_SWITCH_STACK ++ pea %sp@(SWITCH_STACK_SIZE) ++ jbsr m68k_clone ++ addql #4,%sp ++ RESTORE_SWITCH_STACK ++ rts ++ ++ENTRY(sys_vfork) ++ SAVE_SWITCH_STACK ++ pea %sp@(SWITCH_STACK_SIZE) ++ jbsr m68k_vfork ++ addql #4,%sp ++ RESTORE_SWITCH_STACK ++ rts ++ ++ENTRY(sys_sigsuspend) ++ SAVE_SWITCH_STACK ++ pea %sp@(SWITCH_STACK_SIZE) ++ jbsr do_sigsuspend ++ addql #4,%sp ++ RESTORE_SWITCH_STACK ++ rts ++ ++ENTRY(sys_rt_sigsuspend) ++ SAVE_SWITCH_STACK ++ pea %sp@(SWITCH_STACK_SIZE) ++ jbsr do_rt_sigsuspend ++ addql #4,%sp ++ RESTORE_SWITCH_STACK ++ rts ++ ++ENTRY(sys_sigreturn) ++ SAVE_SWITCH_STACK ++ jbsr do_sigreturn ++ RESTORE_SWITCH_STACK ++ rts ++ ++ENTRY(sys_rt_sigreturn) ++ SAVE_SWITCH_STACK ++ jbsr do_rt_sigreturn ++ RESTORE_SWITCH_STACK ++ rts ++ ++resume: ++ /* ++ * Beware - when entering resume, prev (the current task) is ++ * in a0, next (the new task) is in a1,so don't change these ++ * registers until their contents are no longer needed. ++ */ ++ ++ /* save sr */ ++ movew %sr,%d0 ++ movew %d0,%a0@(TASK_THREAD+THREAD_SR) ++ ++ /* save usp */ ++ /* Save USP via %a1 (which is saved/restored from %d0) */ ++ movel %a1,%d0 ++ movel %usp,%a1 ++ movel %a1,%a0@(TASK_THREAD+THREAD_USP) ++ movel %d0,%a1 ++ ++ /* save non-scratch registers on stack */ ++ SAVE_SWITCH_STACK ++ ++ /* save current kernel stack pointer */ ++ movel %sp,%a0@(TASK_THREAD+THREAD_KSP) ++ ++ /* Return previous task in %d1 */ ++ movel %curptr,%d1 ++ ++ /* switch to new task (a1 contains new task) */ ++ movel %a1,%curptr ++ ++ /* restore the kernel stack pointer */ ++ movel %a1@(TASK_THREAD+THREAD_KSP),%sp ++ ++ /* restore non-scratch registers */ ++ RESTORE_SWITCH_STACK ++ ++ /* restore user stack pointer */ ++ movel %a1@(TASK_THREAD+THREAD_USP),%a0 ++ movel %a0,%usp ++ ++ /* restore status register */ ++ movew %a1@(TASK_THREAD+THREAD_SR),%d0 ++ movew %d0,%sr ++ ++ rts ++ ++.data ++ALIGN ++sys_call_table: ++ .long sys_ni_syscall /* 0 - old "setup()" system call*/ ++ .long sys_exit ++ .long sys_fork ++ .long sys_read ++ .long sys_write ++ .long sys_open /* 5 */ ++ .long sys_close ++ .long sys_waitpid ++ .long sys_creat ++ .long sys_link ++ .long sys_unlink /* 10 */ ++ .long sys_execve ++ .long sys_chdir ++ .long sys_time ++ .long sys_mknod ++ .long sys_chmod /* 15 */ ++ .long sys_chown16 ++ .long sys_ni_syscall /* old break syscall holder */ ++ .long sys_stat ++ .long sys_lseek ++ .long sys_getpid /* 20 */ ++ .long sys_mount ++ .long sys_oldumount ++ .long sys_setuid16 ++ .long sys_getuid16 ++ .long sys_stime /* 25 */ ++ .long sys_ptrace ++ .long sys_alarm ++ .long sys_fstat ++ .long sys_pause ++ .long sys_utime /* 30 */ ++ .long sys_ni_syscall /* old stty syscall holder */ ++ .long sys_ni_syscall /* old gtty syscall holder */ ++ .long sys_access ++ .long sys_nice ++ .long sys_ni_syscall /* 35 */ /* old ftime syscall holder */ ++ .long sys_sync ++ .long sys_kill ++ .long sys_rename ++ .long sys_mkdir ++ .long sys_rmdir /* 40 */ ++ .long sys_dup ++ .long sys_pipe ++ .long sys_times ++ .long sys_ni_syscall /* old prof syscall holder */ ++ .long sys_brk /* 45 */ ++ .long sys_setgid16 ++ .long sys_getgid16 ++ .long sys_signal ++ .long sys_geteuid16 ++ .long sys_getegid16 /* 50 */ ++ .long sys_acct ++ .long sys_umount /* recycled never used phys() */ ++ .long sys_ni_syscall /* old lock syscall holder */ ++ .long sys_ioctl ++ .long sys_fcntl /* 55 */ ++ .long sys_ni_syscall /* old mpx syscall holder */ ++ .long sys_setpgid ++ .long sys_ni_syscall /* old ulimit syscall holder */ ++ .long sys_ni_syscall ++ .long sys_umask /* 60 */ ++ .long sys_chroot ++ .long sys_ustat ++ .long sys_dup2 ++ .long sys_getppid ++ .long sys_getpgrp /* 65 */ ++ .long sys_setsid ++ .long sys_sigaction ++ .long sys_sgetmask ++ .long sys_ssetmask ++ .long sys_setreuid16 /* 70 */ ++ .long sys_setregid16 ++ .long sys_sigsuspend ++ .long sys_sigpending ++ .long sys_sethostname ++ .long sys_setrlimit /* 75 */ ++ .long sys_old_getrlimit ++ .long sys_getrusage ++ .long sys_gettimeofday ++ .long sys_settimeofday ++ .long sys_getgroups16 /* 80 */ ++ .long sys_setgroups16 ++ .long old_select ++ .long sys_symlink ++ .long sys_lstat ++ .long sys_readlink /* 85 */ ++ .long sys_uselib ++ .long sys_swapon ++ .long sys_reboot ++ .long old_readdir ++ .long old_mmap /* 90 */ ++ .long sys_munmap ++ .long sys_truncate ++ .long sys_ftruncate ++ .long sys_fchmod ++ .long sys_fchown16 /* 95 */ ++ .long sys_getpriority ++ .long sys_setpriority ++ .long sys_ni_syscall /* old profil syscall holder */ ++ .long sys_statfs ++ .long sys_fstatfs /* 100 */ ++ .long sys_ni_syscall /* ioperm for i386 */ ++ .long sys_socketcall ++ .long sys_syslog ++ .long sys_setitimer ++ .long sys_getitimer /* 105 */ ++ .long sys_newstat ++ .long sys_newlstat ++ .long sys_newfstat ++ .long sys_ni_syscall ++ .long sys_ni_syscall /* 110 */ /* iopl for i386 */ ++ .long sys_vhangup ++ .long sys_ni_syscall /* obsolete idle() syscall */ ++ .long sys_ni_syscall /* vm86old for i386 */ ++ .long sys_wait4 ++ .long sys_swapoff /* 115 */ ++ .long sys_sysinfo ++ .long sys_ipc ++ .long sys_fsync ++ .long sys_sigreturn ++ .long sys_clone /* 120 */ ++ .long sys_setdomainname ++ .long sys_newuname ++ .long sys_cacheflush /* modify_ldt for i386 */ ++ .long sys_adjtimex ++ .long sys_mprotect /* 125 */ ++ .long sys_sigprocmask ++ .long sys_ni_syscall /* old "create_module" */ ++ .long sys_init_module ++ .long sys_delete_module ++ .long sys_ni_syscall /* 130 - old "get_kernel_syms" */ ++ .long sys_quotactl ++ .long sys_getpgid ++ .long sys_fchdir ++ .long sys_bdflush ++ .long sys_sysfs /* 135 */ ++ .long sys_personality ++ .long sys_ni_syscall /* for afs_syscall */ ++ .long sys_setfsuid16 ++ .long sys_setfsgid16 ++ .long sys_llseek /* 140 */ ++ .long sys_getdents ++ .long sys_select ++ .long sys_flock ++ .long sys_msync ++ .long sys_readv /* 145 */ ++ .long sys_writev ++ .long sys_getsid ++ .long sys_fdatasync ++ .long sys_sysctl ++ .long sys_mlock /* 150 */ ++ .long sys_munlock ++ .long sys_mlockall ++ .long sys_munlockall ++ .long sys_sched_setparam ++ .long sys_sched_getparam /* 155 */ ++ .long sys_sched_setscheduler ++ .long sys_sched_getscheduler ++ .long sys_sched_yield ++ .long sys_sched_get_priority_max ++ .long sys_sched_get_priority_min /* 160 */ ++ .long sys_sched_rr_get_interval ++ .long sys_nanosleep ++ .long sys_mremap ++ .long sys_setresuid16 ++ .long sys_getresuid16 /* 165 */ ++ .long sys_getpagesize ++ .long sys_ni_syscall /* old sys_query_module */ ++ .long sys_poll ++ .long sys_nfsservctl ++ .long sys_setresgid16 /* 170 */ ++ .long sys_getresgid16 ++ .long sys_prctl ++ .long sys_rt_sigreturn ++ .long sys_rt_sigaction ++ .long sys_rt_sigprocmask /* 175 */ ++ .long sys_rt_sigpending ++ .long sys_rt_sigtimedwait ++ .long sys_rt_sigqueueinfo ++ .long sys_rt_sigsuspend ++ .long sys_pread64 /* 180 */ ++ .long sys_pwrite64 ++ .long sys_lchown16; ++ .long sys_getcwd ++ .long sys_capget ++ .long sys_capset /* 185 */ ++ .long sys_sigaltstack ++ .long sys_sendfile ++ .long sys_ni_syscall /* streams1 */ ++ .long sys_ni_syscall /* streams2 */ ++ .long sys_vfork /* 190 */ ++ .long sys_getrlimit ++ .long sys_mmap2 ++ .long sys_truncate64 ++ .long sys_ftruncate64 ++ .long sys_stat64 /* 195 */ ++ .long sys_lstat64 ++ .long sys_fstat64 ++ .long sys_chown ++ .long sys_getuid ++ .long sys_getgid /* 200 */ ++ .long sys_geteuid ++ .long sys_getegid ++ .long sys_setreuid ++ .long sys_setregid ++ .long sys_getgroups /* 205 */ ++ .long sys_setgroups ++ .long sys_fchown ++ .long sys_setresuid ++ .long sys_getresuid ++ .long sys_setresgid /* 210 */ ++ .long sys_getresgid ++ .long sys_lchown ++ .long sys_setuid ++ .long sys_setgid ++ .long sys_setfsuid /* 215 */ ++ .long sys_setfsgid ++ .long sys_pivot_root ++ .long sys_ni_syscall ++ .long sys_ni_syscall ++ .long sys_getdents64 /* 220 */ ++ .long sys_gettid ++ .long sys_tkill ++ .long sys_setxattr ++ .long sys_lsetxattr ++ .long sys_fsetxattr /* 225 */ ++ .long sys_getxattr ++ .long sys_lgetxattr ++ .long sys_fgetxattr ++ .long sys_listxattr ++ .long sys_llistxattr /* 230 */ ++ .long sys_flistxattr ++ .long sys_removexattr ++ .long sys_lremovexattr ++ .long sys_fremovexattr ++ .long sys_futex /* 235 */ ++ .long sys_sendfile64 ++ .long sys_mincore ++ .long sys_madvise ++ .long sys_fcntl64 ++ .long sys_readahead /* 240 */ ++ .long sys_io_setup ++ .long sys_io_destroy ++ .long sys_io_getevents ++ .long sys_io_submit ++ .long sys_io_cancel /* 245 */ ++ .long sys_fadvise64 ++ .long sys_exit_group ++ .long sys_lookup_dcookie ++ .long sys_epoll_create ++ .long sys_epoll_ctl /* 250 */ ++ .long sys_epoll_wait ++ .long sys_remap_file_pages ++ .long sys_set_tid_address ++ .long sys_timer_create ++ .long sys_timer_settime /* 255 */ ++ .long sys_timer_gettime ++ .long sys_timer_getoverrun ++ .long sys_timer_delete ++ .long sys_clock_settime ++ .long sys_clock_gettime /* 260 */ ++ .long sys_clock_getres ++ .long sys_clock_nanosleep ++ .long sys_statfs64 ++ .long sys_fstatfs64 ++ .long sys_tgkill /* 265 */ ++ .long sys_utimes ++ .long sys_fadvise64_64 ++ .long sys_mbind ++ .long sys_get_mempolicy ++ .long sys_set_mempolicy /* 270 */ ++ .long sys_mq_open ++ .long sys_mq_unlink ++ .long sys_mq_timedsend ++ .long sys_mq_timedreceive ++ .long sys_mq_notify /* 275 */ ++ .long sys_mq_getsetattr ++ .long sys_waitid ++ .long sys_ni_syscall /* for sys_vserver */ ++ .long sys_add_key ++ .long sys_request_key /* 280 */ ++ .long sys_keyctl ++ .long sys_ioprio_set ++ .long sys_ioprio_get ++ .long sys_inotify_init ++ .long sys_inotify_add_watch /* 285 */ ++ .long sys_inotify_rm_watch ++ .long sys_migrate_pages ++ .long sys_openat ++ .long sys_mkdirat ++ .long sys_mknodat /* 290 */ ++ .long sys_fchownat ++ .long sys_futimesat ++ .long sys_fstatat64 ++ .long sys_unlinkat ++ .long sys_renameat /* 295 */ ++ .long sys_linkat ++ .long sys_symlinkat ++ .long sys_readlinkat ++ .long sys_fchmodat ++ .long sys_faccessat /* 300 */ ++ .long sys_ni_syscall /* Reserved for pselect6 */ ++ .long sys_ni_syscall /* Reserved for ppoll */ ++ .long sys_unshare ++ .long sys_set_robust_list ++ .long sys_get_robust_list /* 305 */ ++ .long sys_splice ++ .long sys_sync_file_range ++ .long sys_tee ++ .long sys_vmsplice ++ .long sys_move_pages /* 310 */ ++ +--- /dev/null ++++ b/arch/m68k/coldfire/head.S +@@ -0,0 +1,661 @@ ++/* ++ * head.S is the MMU enabled ColdFire specific initial boot code ++ * ++ * Ported to ColdFire by ++ * Matt Waddel Matt.Waddel@freescale.com ++ * Kurt Mahan kmahan@freescale.com ++ * Copyright Freescale Semiconductor, Inc. 2007, 2008 ++ * Phys kernel mapping Copyright Daniel Krueger, SYSTEC electornic GmbH 2008 ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * Parts of this code came from arch/m68k/kernel/head.S ++ */ ++#include <linux/linkage.h> ++#include <linux/init.h> ++#include <asm/bootinfo.h> ++#include <asm/setup.h> ++#include <asm/entry.h> ++#include <asm/pgtable.h> ++#include <asm/page.h> ++#include <asm/coldfire.h> ++#include <asm/mcfuart.h> ++#include <asm/cfcache.h> ++ ++#define DEBUG ++ ++.globl kernel_pg_dir ++.globl availmem ++.globl set_context ++.globl set_fpga ++ ++#ifdef DEBUG ++/* When debugging use readable names for labels */ ++#ifdef __STDC__ ++#define L(name) .head.S.##name ++#else ++#define L(name) .head.S./**/name ++#endif ++#else ++#ifdef __STDC__ ++#define L(name) .L##name ++#else ++#define L(name) .L/**/name ++#endif ++#endif ++ ++/* The __INITDATA stuff is a no-op when ftrace or kgdb are turned on */ ++#ifndef __INITDATA ++#define __INITDATA .data ++#define __FINIT .previous ++#endif ++ ++#if CONFIG_SDRAM_BASE != PAGE_OFFSET ++/* ++ * Kernel mapped to virtual ram address. ++ * ++ * M5445x: ++ * Data[0]: 0xF0000000 -> 0xFFFFFFFF System regs ++ * Data[1]: 0xA0000000 -> 0xAFFFFFFF PCI ++ * Code[0]: Not Mapped ++ * Code[1]: Not Mapped ++ * ++ * M547x/M548x ++ * Data[0]: 0xF0000000 -> 0xFFFFFFFF System regs ++ * Data[1]: Not Mapped ++ * Code[0]: Not Mapped ++ * Code[1]: Not Mapped ++ */ ++#if defined(CONFIG_M5445X) ++#define ACR0_DEFAULT #0xF00FA048 /* System regs */ ++#define ACR1_DEFAULT #0xA00FA048 /* PCI */ ++#define ACR2_DEFAULT #0x00000000 /* Not Mapped */ ++#define ACR3_DEFAULT #0x00000000 /* Not Mapped */ ++#elif defined(CONFIG_M547X_8X) ++#define ACR0_DEFAULT #0xF00FA048 /* System Regs */ ++#define ACR1_DEFAULT #0x00000000 /* Not Mapped */ ++#define ACR2_DEFAULT #0x00000000 /* Not Mapped */ ++#define ACR3_DEFAULT #0x00000000 /* Not Mapped */ ++#endif ++ ++#else /* CONFIG_SDRAM_BASE = PAGE_OFFSET */ ++/* ++ * Kernel mapped to physical ram address. ++ * ++ * M5445x: ++ * Data[0]: 0xF0000000 -> 0xFFFFFFFF System regs ++ * Data[1]: 0x40000000 -> 0x4FFFFFFF SDRAM - uncached ++ * Code[0]: Not Mapped ++ * Code[1]: 0x40000000 -> 0x4FFFFFFF SDRAM - cached ++ * ++ * M547x/M548x ++ * Data[0]: 0xF0000000 -> 0xFFFFFFFF System regs ++ * Data[1]: 0x00000000 -> 0x0FFFFFFF SDRAM - uncached ++ * Code[0]: Not Mapped ++ * Code[1]: 0x00000000 -> 0x0FFFFFFF SDRAM - cached ++ */ ++#if defined(CONFIG_M5445X) ++#define ACR0_DEFAULT #0xF00FA048 /* System Regs */ ++#define ACR1_DEFAULT #0x400FA048 /* SDRAM uncached */ ++#define ACR2_DEFAULT #0x00000000 /* Not mapped */ ++#define ACR3_DEFAULT #0x400FA008 /* SDRAM cached */ ++#elif defined(CONFIG_M547X_8X) ++#define ACR0_DEFAULT #0xF00FA048 /* System Regs */ ++#define ACR1_DEFAULT #0x000FA048 /* SDRAM uncached */ ++#define ACR2_DEFAULT #0x00000000 /* Not mapped */ ++#define ACR3_DEFAULT #0x000FA008 /* SDRAM cached */ ++#endif ++#endif ++ ++/* Several macros to make the writing of subroutines easier: ++ * - func_start marks the beginning of the routine which setups the frame ++ * register and saves the registers, it also defines another macro ++ * to automatically restore the registers again. ++ * - func_return marks the end of the routine and simply calls the prepared ++ * macro to restore registers and jump back to the caller. ++ * - func_define generates another macro to automatically put arguments ++ * onto the stack call the subroutine and cleanup the stack again. ++ */ ++ ++.macro load_symbol_address symbol,register ++ movel #\symbol,\register ++.endm ++ ++.macro func_start name,saveregs,savesize,stack=0 ++L(\name): ++ linkw %a6,#-\stack ++ subal #(\savesize),%sp ++ moveml \saveregs,%sp@ ++.set stackstart,-\stack ++ ++.macro func_return_\name ++ moveml %sp@,\saveregs ++ addal #(\savesize),%sp ++ unlk %a6 ++ rts ++.endm ++.endm ++ ++.macro func_return name ++ func_return_\name ++.endm ++ ++.macro func_call name ++ jbsr L(\name) ++.endm ++ ++.macro move_stack nr,arg1,arg2,arg3,arg4 ++.if \nr ++ move_stack "(\nr-1)",\arg2,\arg3,\arg4 ++ movel \arg1,%sp@- ++.endif ++.endm ++ ++.macro func_define name,nr=0 ++.macro \name arg1,arg2,arg3,arg4 ++ move_stack \nr,\arg1,\arg2,\arg3,\arg4 ++ func_call \name ++.if \nr ++ lea %sp@(\nr*4),%sp ++.endif ++.endm ++.endm ++ ++func_define serial_putc,1 ++ ++.macro putc ch ++ pea \ch ++ func_call serial_putc ++ addql #4,%sp ++.endm ++ ++.macro dputc ch ++#ifdef DEBUG ++ putc \ch ++#endif ++.endm ++ ++func_define putn,1 ++ ++.macro dputn nr ++#ifdef DEBUG ++ putn \nr ++#endif ++.endm ++ ++#if CONFIG_SDRAM_BASE != PAGE_OFFSET ++/* ++ mmu_map - creates a new TLB entry ++ ++ virt_addr Must be on proper boundary ++ phys_addr Must be on proper boundary ++ itlb MMUOR_ITLB if instruction TLB or 0 ++ asid address space ID ++ shared_global MMUTR_SG if shared between different ASIDs or 0 ++ size_code MMUDR_SZ1M 1 MB ++ MMUDR_SZ4K 4 KB ++ MMUDR_SZ8K 8 KB ++ MMUDR_SZ16M 16 MB ++ cache_mode MMUDR_INC instruction non-cacheable ++ MMUDR_IC instruction cacheable ++ MMUDR_DWT data writethrough ++ MMUDR_DCB data copyback ++ MMUDR_DNCP data non-cacheable, precise ++ MMUDR_DNCIP data non-cacheable, imprecise ++ super_prot MMUDR_SP if user mode generates exception or 0 ++ readable MMUDR_R if permits read access (data TLB) or 0 ++ writable MMUDR_W if permits write access (data TLB) or 0 ++ executable MMUDR_X if permits execute access (instruction TLB) or 0 ++ locked MMUDR_LK prevents TLB entry from being replaced or 0 ++ temp_data_reg a data register to use for temporary values ++*/ ++.macro mmu_map virt_addr,phys_addr,itlb,asid,shared_global,size_code,cache_mode,super_prot,readable,writable,executable,locked,temp_data_reg ++ /* Set up search of TLB. */ ++ movel #(\virt_addr+1), \temp_data_reg ++ movel \temp_data_reg, MMUAR ++ /* Search. */ ++ movel #(MMUOR_STLB + MMUOR_ADR +\itlb), \temp_data_reg ++ movew \temp_data_reg, (MMUOR) ++ /* Set up tag value. */ ++ movel #(\virt_addr + \asid + \shared_global + MMUTR_V), \temp_data_reg ++ movel \temp_data_reg, MMUTR ++ /* Set up data value. */ ++ movel #(\phys_addr + \size_code + \cache_mode + \super_prot + \readable + \writable + \executable + \locked), \temp_data_reg ++ movel \temp_data_reg, MMUDR ++ /* Save it. */ ++ movel #(MMUOR_ACC + MMUOR_UAA + \itlb), \temp_data_reg ++ movew \temp_data_reg, (MMUOR) ++.endm /* mmu_map */ ++ ++.macro mmu_unmap virt_addr,itlb,temp_data_reg ++ /* Set up search of TLB. */ ++ movel #(\virt_addr+1), \temp_data_reg ++ movel \temp_data_reg, MMUAR ++ /* Search. */ ++ movel #(MMUOR_STLB + MMUOR_ADR +\itlb), \temp_data_reg ++ movew \temp_data_reg, (MMUOR) ++ /* Test for hit. */ ++ movel MMUSR,\temp_data_reg ++ btst #MMUSR_HITN,\temp_data_reg ++ beq 1f ++ /* Read the TLB. */ ++ movel #(MMUOR_RW + MMUOR_ACC +\itlb), \temp_data_reg ++ movew \temp_data_reg, (MMUOR) ++ movel MMUSR,\temp_data_reg ++ /* Set up tag value. */ ++ movel #0, \temp_data_reg ++ movel \temp_data_reg, MMUTR ++ /* Set up data value. */ ++ movel #0, \temp_data_reg ++ movel \temp_data_reg, MMUDR ++ /* Save it. */ ++ movel #(MMUOR_ACC + MMUOR_UAA + \itlb), \temp_data_reg ++ movew \temp_data_reg, (MMUOR) ++1: ++.endm /* mmu_unmap */ ++#endif /* CONFIG_SDRAM_BASE != PAGE_OFFSET */ ++ ++/* .text */ ++.section ".text.head","ax" ++ENTRY(_stext) ++/* Version numbers of the bootinfo interface -- if we later pass info ++ * from boot ROM we might want to put something real here. ++ * ++ * The area from _stext to _start will later be used as kernel pointer table ++ */ ++ bras 1f /* Jump over bootinfo version numbers */ ++ ++ .long BOOTINFOV_MAGIC ++ .long 0 ++#if CONFIG_SDRAM_BASE != PAGE_OFFSET ++1: jmp __start-(0xc0000000-CONFIG_SDRAM_BASE) ++#else ++1: jmp __start ++#endif ++ ++.equ kernel_pg_dir,_stext ++.equ .,_stext+0x1000 ++ ++ENTRY(_start) ++ jra __start ++__INIT ++ENTRY(__start) ++/* Save the location of u-boot info - cmd line, bd_info, etc. */ ++ movel %a7,%a4 /* Don't use %a4 before cf_early_init */ ++ addl #0x00000004,%a4 /* offset past top */ ++ addl #(PAGE_OFFSET-CONFIG_SDRAM_BASE),%a4 /* high mem offset */ ++ ++/* Setup initial stack pointer */ ++ movel #CONFIG_SDRAM_BASE+0x1000,%sp ++ ++/* Setup usp */ ++ subl %a0,%a0 ++ movel %a0,%usp ++ ++#if defined(CONFIG_M5445X) ++ movel #0x80000000, %d0 ++ movec %d0, %rambar1 ++#elif defined(CONFIG_M547X_8X) ++ movel #MCF_MBAR, %d0 ++ movec %d0, %mbar ++ move.l #(MCF_RAMBAR0 + 0x21), %d0 ++ movec %d0, %rambar0 ++ move.l #(MCF_RAMBAR1 + 0x21), %d0 ++ movec %d0, %rambar1 ++#endif ++ ++ movew #0x2700,%sr ++ ++/* reset cache */ ++ movel #(CF_CACR_ICINVA + CF_CACR_DCINVA),%d0 ++ movecl %d0,%cacr ++ ++ movel #(MMU_BASE+1),%d0 ++ movecl %d0,%mmubar ++ movel #MMUOR_CA,%a0 /* Clear tlb entries */ ++ movew %a0,(MMUOR) ++ movel #(MMUOR_CA + MMUOR_ITLB),%a0 /* Use ITLB for searches */ ++ movew %a0,(MMUOR) ++ movel #0,%a0 /* Clear Addr Space User ID */ ++ movecl %a0,%asid ++ ++/* setup ACRs */ ++ movel ACR0_DEFAULT, %d0 /* ACR0 (DATA) setup */ ++ movec %d0, %acr0 ++ nop ++ movel ACR1_DEFAULT, %d0 /* ACR1 (DATA) setup */ ++ movec %d0, %acr1 ++ nop ++ movel ACR2_DEFAULT, %d0 /* ACR2 (CODE) setup */ ++ movec %d0, %acr2 ++ nop ++ movel ACR3_DEFAULT, %d0 /* ACR3 (CODE) setup */ ++ movec %d0, %acr3 ++ nop ++ ++ /* If you change the memory size to another value make a matching ++ change in paging_init(cf-mmu.c) to zones_size[]. */ ++ ++#if CONFIG_SDRAM_BASE != PAGE_OFFSET ++#if defined(CONFIG_M5445X) ++ /* Map 256MB as code */ ++ mmu_map (PAGE_OFFSET+0*0x1000000), (PHYS_OFFSET+0*0x1000000), \ ++ MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC, MMUDR_SP, \ ++ 0, 0, MMUDR_X, MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+1*0x1000000), (PHYS_OFFSET+1*0x1000000), \ ++ MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC, MMUDR_SP, \ ++ 0, 0, MMUDR_X, MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+2*0x1000000), (PHYS_OFFSET+2*0x1000000), \ ++ MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC, MMUDR_SP, \ ++ 0, 0, MMUDR_X, MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+3*0x1000000), (PHYS_OFFSET+3*0x1000000), \ ++ MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC, MMUDR_SP, \ ++ 0, 0, MMUDR_X, MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+4*0x1000000), (PHYS_OFFSET+4*0x1000000), \ ++ MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC, MMUDR_SP, \ ++ 0, 0, MMUDR_X, MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+5*0x1000000), (PHYS_OFFSET+5*0x1000000), \ ++ MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC, MMUDR_SP, \ ++ 0, 0, MMUDR_X, MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+6*0x1000000), (PHYS_OFFSET+6*0x1000000), \ ++ MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC, MMUDR_SP, \ ++ 0, 0, MMUDR_X, MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+7*0x1000000), (PHYS_OFFSET+7*0x1000000), \ ++ MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC, MMUDR_SP, \ ++ 0, 0, MMUDR_X, MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+8*0x1000000), (PHYS_OFFSET+8*0x1000000), \ ++ MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC, MMUDR_SP, \ ++ 0, 0, MMUDR_X, MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+9*0x1000000), (PHYS_OFFSET+9*0x1000000), \ ++ MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC, MMUDR_SP, \ ++ 0, 0, MMUDR_X, MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+10*0x1000000), (PHYS_OFFSET+10*0x1000000), \ ++ MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC, MMUDR_SP, \ ++ 0, 0, MMUDR_X, MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+11*0x1000000), (PHYS_OFFSET+11*0x1000000), \ ++ MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC, MMUDR_SP, \ ++ 0, 0, MMUDR_X, MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+12*0x1000000), (PHYS_OFFSET+12*0x1000000), \ ++ MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC, MMUDR_SP, \ ++ 0, 0, MMUDR_X, MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+13*0x1000000), (PHYS_OFFSET+13*0x1000000), \ ++ MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC, MMUDR_SP, \ ++ 0, 0, MMUDR_X, MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+14*0x1000000), (PHYS_OFFSET+14*0x1000000), \ ++ MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC, MMUDR_SP, \ ++ 0, 0, MMUDR_X, MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+15*0x1000000), (PHYS_OFFSET+15*0x1000000), \ ++ MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC, MMUDR_SP, \ ++ 0, 0, MMUDR_X, MMUDR_LK, %d0 ++ ++ /* Map 256MB as data also */ ++ mmu_map (PAGE_OFFSET+0*0x1000000), (PHYS_OFFSET+0*0x1000000), 0, 0, \ ++ MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \ ++ 0, MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+1*0x1000000), (PHYS_OFFSET+1*0x1000000), 0, 0, \ ++ MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \ ++ 0, MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+2*0x1000000), (PHYS_OFFSET+2*0x1000000), 0, 0, \ ++ MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \ ++ 0, MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+3*0x1000000), (PHYS_OFFSET+3*0x1000000), 0, 0, \ ++ MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \ ++ 0, MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+4*0x1000000), (PHYS_OFFSET+4*0x1000000), 0, 0, \ ++ MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \ ++ 0, MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+5*0x1000000), (PHYS_OFFSET+5*0x1000000), 0, 0, \ ++ MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \ ++ 0, MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+6*0x1000000), (PHYS_OFFSET+6*0x1000000), 0, 0, \ ++ MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \ ++ 0, MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+7*0x1000000), (PHYS_OFFSET+7*0x1000000), 0, 0, \ ++ MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \ ++ 0, MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+8*0x1000000), (PHYS_OFFSET+8*0x1000000), 0, 0, \ ++ MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \ ++ 0, MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+9*0x1000000), (PHYS_OFFSET+9*0x1000000), 0, 0, \ ++ MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \ ++ 0, MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+10*0x1000000), (PHYS_OFFSET+10*0x1000000), 0, 0, \ ++ MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \ ++ 0, MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+11*0x1000000), (PHYS_OFFSET+11*0x1000000), 0, 0, \ ++ MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \ ++ 0, MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+12*0x1000000), (PHYS_OFFSET+12*0x1000000), 0, 0, \ ++ MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \ ++ 0, MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+13*0x1000000), (PHYS_OFFSET+13*0x1000000), 0, 0, \ ++ MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \ ++ 0, MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+14*0x1000000), (PHYS_OFFSET+14*0x1000000), 0, 0, \ ++ MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \ ++ 0, MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+15*0x1000000), (PHYS_OFFSET+15*0x1000000), 0, 0, \ ++ MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \ ++ 0, MMUDR_LK, %d0 ++ ++ /* Map ATA registers -- sacrifice a data TLB due to the hw design */ ++ mmu_map (0x90000000), (0x90000000), 0, 0, \ ++ MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \ ++ 0, MMUDR_LK, %d0 ++ ++#elif defined(CONFIG_M547X_8X) ++ ++ /* Map first 8 MB as code */ ++ mmu_map (PAGE_OFFSET+0*1024*1024), (0*1024*1024), MMUOR_ITLB, 0, \ ++ MMUTR_SG, MMUDR_SZ1M, MMUDR_IC, MMUDR_SP, 0, 0, MMUDR_X, \ ++ MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+1*1024*1024), (1*1024*1024), MMUOR_ITLB, 0, \ ++ MMUTR_SG, MMUDR_SZ1M, MMUDR_IC, MMUDR_SP, 0, 0, MMUDR_X, \ ++ MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+2*1024*1024), (2*1024*1024), MMUOR_ITLB, 0, \ ++ MMUTR_SG, MMUDR_SZ1M, MMUDR_IC, MMUDR_SP, 0, 0, MMUDR_X, \ ++ MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+3*1024*1024), (3*1024*1024), MMUOR_ITLB, 0, \ ++ MMUTR_SG, MMUDR_SZ1M, MMUDR_IC, MMUDR_SP, 0, 0, MMUDR_X, \ ++ MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+4*1024*1024), (4*1024*1024), MMUOR_ITLB, 0, \ ++ MMUTR_SG, MMUDR_SZ1M, MMUDR_IC, MMUDR_SP, 0, 0, MMUDR_X, \ ++ MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+5*1024*1024), (5*1024*1024), MMUOR_ITLB, 0, \ ++ MMUTR_SG, MMUDR_SZ1M, MMUDR_IC, MMUDR_SP, 0, 0, MMUDR_X, \ ++ MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+6*1024*1024), (6*1024*1024), MMUOR_ITLB, 0, \ ++ MMUTR_SG, MMUDR_SZ1M, MMUDR_IC, MMUDR_SP, 0, 0, MMUDR_X, \ ++ MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+7*1024*1024), (7*1024*1024), MMUOR_ITLB, 0, \ ++ MMUTR_SG, MMUDR_SZ1M, MMUDR_IC, MMUDR_SP, 0, 0, MMUDR_X, \ ++ MMUDR_LK, %d0 ++ ++ /* Map first 8 MB as data */ ++ mmu_map (PAGE_OFFSET+0*1024*1024), (0*1024*1024), 0, 0, \ ++ MMUTR_SG, MMUDR_SZ1M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, \ ++ MMUDR_W, 0, MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+1*1024*1024), (1*1024*1024), 0, 0, \ ++ MMUTR_SG, MMUDR_SZ1M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, \ ++ MMUDR_W, 0, MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+2*1024*1024), (2*1024*1024), 0, 0, \ ++ MMUTR_SG, MMUDR_SZ1M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, \ ++ MMUDR_W, 0, MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+3*1024*1024), (3*1024*1024), 0, 0, \ ++ MMUTR_SG, MMUDR_SZ1M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, \ ++ MMUDR_W, 0, MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+4*1024*1024), (4*1024*1024), 0, 0, \ ++ MMUTR_SG, MMUDR_SZ1M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, \ ++ MMUDR_W, 0, MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+5*1024*1024), (5*1024*1024), 0, 0, \ ++ MMUTR_SG, MMUDR_SZ1M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, \ ++ MMUDR_W, 0, MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+6*1024*1024), (6*1024*1024), 0, 0, \ ++ MMUTR_SG, MMUDR_SZ1M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, \ ++ MMUDR_W, 0, MMUDR_LK, %d0 ++ mmu_map (PAGE_OFFSET+7*1024*1024), (7*1024*1024), 0, 0, \ ++ MMUTR_SG, MMUDR_SZ1M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, \ ++ MMUDR_W, 0, MMUDR_LK, %d0 ++#endif ++ /* ++ * Do unity mapping to enable the MMU. Map first chunk of memory ++ * in place as code/data. The TLBs will be deleted after the MMU is ++ * enabled and we are executing in high memory. ++ */ ++ ++#if defined(CONFIG_M5445X) ++ /* Map first 16 MB as code */ ++ mmu_map (PHYS_OFFSET+0*0x1000000), (PHYS_OFFSET+0*0x1000000), \ ++ MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_INC, MMUDR_SP, 0, \ ++ 0, MMUDR_X, 0, %d0 ++ /* Map first 16 MB as data too */ ++ mmu_map (PHYS_OFFSET+0*0x1000000), (PHYS_OFFSET+0*0x1000000), 0, 0, \ ++ MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \ ++ 0, 0, %d0 ++#elif defined(CONFIG_M547X_8X) ++ /* Map first 4 MB as code */ ++ mmu_map (0*1024*1024), (0*1024*1024), MMUOR_ITLB, 0, \ ++ MMUTR_SG, MMUDR_SZ1M, MMUDR_IC, MMUDR_SP, 0, 0, \ ++ MMUDR_X, 0, %d0 ++ mmu_map (1*1024*1024), (1*1024*1024), MMUOR_ITLB, 0, \ ++ MMUTR_SG, MMUDR_SZ1M, MMUDR_IC, MMUDR_SP, 0, 0, \ ++ MMUDR_X, 0, %d0 ++ mmu_map (2*1024*1024), (2*1024*1024), MMUOR_ITLB, 0, \ ++ MMUTR_SG, MMUDR_SZ1M, MMUDR_IC, MMUDR_SP, 0, 0, \ ++ MMUDR_X, 0, %d0 ++ mmu_map (3*1024*1024), (3*1024*1024), MMUOR_ITLB, 0, \ ++ MMUTR_SG, MMUDR_SZ1M, MMUDR_IC, MMUDR_SP, 0, 0, \ ++ MMUDR_X, 0, %d0 ++ ++ /* Map first 4 MB as data too */ ++ mmu_map (0*1024*1024), (0*1024*1024), 0, 0, \ ++ MMUTR_SG, MMUDR_SZ1M, MMUDR_DCB, MMUDR_SP, MMUDR_R, \ ++ MMUDR_W, 0, 0, %d0 ++ mmu_map (1*1024*1024), (1*1024*1024), 0, 0, \ ++ MMUTR_SG, MMUDR_SZ1M, MMUDR_DCB, MMUDR_SP, MMUDR_R, \ ++ MMUDR_W, 0, 0, %d0 ++ mmu_map (2*1024*1024), (2*1024*1024), 0, 0, \ ++ MMUTR_SG, MMUDR_SZ1M, MMUDR_DCB, MMUDR_SP, MMUDR_R, \ ++ MMUDR_W, 0, 0, %d0 ++ mmu_map (3*1024*1024), (3*1024*1024), 0, 0, \ ++ MMUTR_SG, MMUDR_SZ1M, MMUDR_DCB, MMUDR_SP, MMUDR_R, \ ++ MMUDR_W, 0, 0, %d0 ++#endif ++#endif /* CONFIG_SDRAM_BASE != PAGE_OFFSET */ ++ ++ /* Turn on MMU */ ++ movel #(MMUCR_EN),%a0 ++ movel %a0,MMUCR ++ nop /* This synchs the pipeline after a write to MMUCR */ ++ ++ movel #__running_high,%a0 /* Get around PC-relative addressing. */ ++ jmp %a0@ ++ ++ENTRY(__running_high) ++ load_symbol_address _stext,%sp ++ movel L(memory_start),%a0 ++ movel %a0,availmem ++ load_symbol_address L(phys_kernel_start),%a0 ++ load_symbol_address _stext,%a1 ++ subl #_stext,%a1 ++ addl #PAGE_OFFSET,%a1 ++ movel %a1,%a0@ ++ ++/* zero bss */ ++ lea _sbss,%a0 ++ lea _ebss,%a1 ++ clrl %d0 ++_loop_bss: ++ movel %d0,(%a0)+ ++ cmpl %a0,%a1 ++ bne _loop_bss ++ ++ /* Unmap unity mappings */ ++#if CONFIG_SDRAM_BASE != PAGE_OFFSET ++#if defined(CONFIG_M5445X) ++ mmu_unmap (PHYS_OFFSET+0*0x1000000), MMUOR_ITLB, %d0 ++ mmu_unmap (PHYS_OFFSET+0*0x1000000), 0, %d0 ++#elif defined(CONFIG_M547X_8X) ++ mmu_unmap (PHYS_OFFSET+0*0x1000000), MMUOR_ITLB, %d0 ++ mmu_unmap (PHYS_OFFSET+1*0x1000000), MMUOR_ITLB, %d0 ++ mmu_unmap (PHYS_OFFSET+2*0x1000000), MMUOR_ITLB, %d0 ++ mmu_unmap (PHYS_OFFSET+3*0x1000000), MMUOR_ITLB, %d0 ++ mmu_unmap (PHYS_OFFSET+0*0x1000000), 0, %d0 ++ mmu_unmap (PHYS_OFFSET+1*0x1000000), 0, %d0 ++ mmu_unmap (PHYS_OFFSET+2*0x1000000), 0, %d0 ++ mmu_unmap (PHYS_OFFSET+3*0x1000000), 0, %d0 ++#endif ++#endif /* CONFIG_SDRAM_BASE != PAGE_OFFSET */ ++ ++/* Setup initial stack pointer */ ++ lea init_task,%a2 ++ lea init_thread_union+THREAD_SIZE,%sp ++ subl %a6,%a6 /* clear a6 for gdb */ ++ ++#ifdef CONFIG_MCF_USER_HALT ++/* Setup debug control reg to allow halts from user space */ ++ lea wdbg_uhe,%a0 ++ wdebug (%a0) ++#endif ++ ++ movel %a4,uboot_info_stk /* save uboot info to variable */ ++ jsr cf_early_init ++ jmp start_kernel ++ ++.section ".text.head","ax" ++set_context: ++func_start set_context,%d0,(1*4) ++ movel 12(%sp),%d0 ++ movec %d0,%asid ++func_return set_context ++ ++#ifdef CONFIG_M5445X ++/* ++ * set_fpga(addr,val) on the M5445X ++ * ++ * Map in 0x00000000 -> 0x0fffffff and then do the write. ++ */ ++set_fpga: ++#if 0 ++ movew %sr,%d1 ++ movew #0x2700,%sr ++ movel ACR0_FPGA, %d0 ++ movec %d0, %acr0 ++ nop ++ moveal 4(%sp),%a0 ++ movel 8(%sp),%a0@ ++ movel ACR0_DEFAULT, %d0 ++ movec %d0, %acr0 ++ nop ++ movew %d1,%sr ++#endif ++ rts ++#endif ++ ++ .data ++ .align 4 ++ ++availmem: ++ .long 0 ++L(phys_kernel_start): ++ .long PAGE_OFFSET ++L(kernel_end): ++ .long 0 ++L(memory_start): ++ .long PAGE_OFFSET_RAW ++ ++#ifdef CONFIG_MCF_USER_HALT ++/* ++ * Enable User Halt Enable in the debug control register. ++ */ ++wdbg_uhe: ++ .word 0x2c80 /* DR0 */ ++ .word 0x00b0 /* 31:16 */ ++ .word 0x0400 /* 15:0 -- enable UHE */ ++ .word 0x0000 /* unused */ ++#endif ++ ++ +--- /dev/null ++++ b/arch/m68k/coldfire/ints.c +@@ -0,0 +1,463 @@ ++/* ++ * linux/arch/m68k/coldfire/ints.c -- General interrupt handling code ++ * ++ * Copyright (C) 1999-2002 Greg Ungerer (gerg@snapgear.com) ++ * Copyright (C) 1998 D. Jeff Dionne <jeff@lineo.ca>, ++ * Kenneth Albanowski <kjahds@kjahds.com>, ++ * Copyright (C) 2000 Lineo Inc. (www.lineo.com) ++ * ++ * Copyright Freescale Semiconductor, Inc. 2007, 2008 ++ * Kurt Mahan kmahan@freescale.com ++ * Matt Waddel Matt.Waddel@freescale.com ++ * ++ * Based on: ++ * linux/arch/m68k/kernel/ints.c & ++ * linux/arch/m68knommu/5307/ints.c ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive ++ * for more details. ++ */ ++ ++#include <linux/module.h> ++#include <linux/types.h> ++#include <linux/init.h> ++#include <linux/sched.h> ++#include <linux/kernel_stat.h> ++#include <linux/errno.h> ++#include <linux/seq_file.h> ++#include <linux/interrupt.h> ++ ++#include <asm/system.h> ++#include <asm/irq.h> ++#include <asm/traps.h> ++#include <asm/page.h> ++#include <asm/machdep.h> ++#include <asm/irq_regs.h> ++ ++#include <asm/mcfsim.h> ++ ++/* ++ * IRQ Handler lists. ++ */ ++static struct irq_node *irq_list[SYS_IRQS]; ++static struct irq_controller *irq_controller[SYS_IRQS]; ++static int irq_depth[SYS_IRQS]; ++ ++/* ++ * IRQ Controller ++ */ ++#if defined(CONFIG_M5445X) ++void m5445x_irq_enable(unsigned int irq); ++void m5445x_irq_disable(unsigned int irq); ++static struct irq_controller m5445x_irq_controller = { ++ .name = "M5445X", ++ .lock = SPIN_LOCK_UNLOCKED, ++ .enable = m5445x_irq_enable, ++ .disable = m5445x_irq_disable, ++}; ++#elif defined(CONFIG_M547X_8X) ++void m547x_8x_irq_enable(unsigned int irq); ++void m547x_8x_irq_disable(unsigned int irq); ++static struct irq_controller m547x_8x_irq_controller = { ++ .name = "M547X_8X", ++ .lock = SPIN_LOCK_UNLOCKED, ++ .enable = m547x_8x_irq_enable, ++ .disable = m547x_8x_irq_disable, ++}; ++#else ++# error No IRQ controller defined ++#endif ++ ++#define POOL_SIZE SYS_IRQS ++static struct irq_node pool[POOL_SIZE]; ++static struct irq_node *get_irq_node(void); ++ ++/* The number of spurious interrupts */ ++unsigned int num_spurious; ++asmlinkage void handle_badint(struct pt_regs *regs); ++ ++/* ++ * void init_IRQ(void) ++ * ++ * This function should be called during kernel startup to initialize ++ * the IRQ handling routines. ++ */ ++void __init init_IRQ(void) ++{ ++ int i; ++ ++#if defined(CONFIG_M5445X) ++ for (i = 0; i < SYS_IRQS; i++) ++ irq_controller[i] = &m5445x_irq_controller; ++#elif defined(CONFIG_M547X_8X) ++ for (i = 0; i < SYS_IRQS; i++) ++ irq_controller[i] = &m547x_8x_irq_controller; ++#endif ++} ++ ++/* ++ * process_int(unsigned long vec, struct pt_regs *fp) ++ * ++ * Process an interrupt. Called from entry.S. ++ */ ++asmlinkage void process_int(unsigned long vec, struct pt_regs *fp) ++{ ++ struct pt_regs *old_regs; ++ struct irq_node *node; ++ old_regs = set_irq_regs(fp); ++ kstat_cpu(0).irqs[vec]++; ++ ++ node = irq_list[vec]; ++ if (!node) ++ handle_badint(fp); ++ else { ++ do { ++ node->handler(vec, node->dev_id); ++ node = node->next; ++ } while (node); ++ } ++ ++ set_irq_regs(old_regs); ++} ++ ++/* ++ * show_interrupts( struct seq_file *p, void *v) ++ * ++ * Called to show all the current interrupt information. ++ */ ++int show_interrupts(struct seq_file *p, void *v) ++{ ++ struct irq_controller *contr; ++ struct irq_node *node; ++ int i = *(loff_t *) v; ++ ++ if ((i < NR_IRQS) && (irq_list[i])) { ++ contr = irq_controller[i]; ++ node = irq_list[i]; ++ seq_printf(p, "%-8s %3u: %10u %s", contr->name, i, ++ kstat_cpu(0).irqs[i], node->devname); ++ while ((node = node->next)) ++ seq_printf(p, ", %s", node->devname); ++ ++ seq_printf(p, "\n"); ++ } ++ ++ return 0; ++} ++ ++/* ++ * get_irq_node(void) ++ * ++ * Get an irq node from the pool. ++ */ ++struct irq_node *get_irq_node(void) ++{ ++ struct irq_node *p = pool; ++ int i; ++ ++ for (i = 0; i < POOL_SIZE; i++, p++) { ++ if (!p->handler) { ++ memset(p, 0, sizeof(struct irq_node)); ++ return p; ++ } ++ } ++ printk(KERN_INFO "%s(%s:%d): No more irq nodes, I suggest you \ ++ increase POOL_SIZE", __FUNCTION__, __FILE__, __LINE__); ++ return NULL; ++} ++ ++void init_irq_proc(void) ++{ ++ /* Insert /proc/irq driver here */ ++} ++ ++int setup_irq(unsigned int irq, struct irq_node *node) ++{ ++ struct irq_controller *contr; ++ struct irq_node **prev; ++ unsigned long flags; ++ ++ if (irq >= NR_IRQS || !irq_controller[irq]) { ++ printk("%s: Incorrect IRQ %d from %s\n", ++ __FUNCTION__, irq, node->devname); ++ return -ENXIO; ++ } ++ ++ contr = irq_controller[irq]; ++ spin_lock_irqsave(&contr->lock, flags); ++ ++ prev = irq_list + irq; ++ if (*prev) { ++ /* Can't share interrupts unless both agree to */ ++ if (!((*prev)->flags & node->flags & IRQF_SHARED)) { ++ spin_unlock_irqrestore(&contr->lock, flags); ++ printk(KERN_INFO "%s: -BUSY-Incorrect IRQ %d \n", ++ __FUNCTION__, irq); ++ return -EBUSY; ++ } ++ while (*prev) ++ prev = &(*prev)->next; ++ } ++ ++ if (!irq_list[irq]) { ++ if (contr->startup) ++ contr->startup(irq); ++ else ++ contr->enable(irq); ++ } ++ node->next = NULL; ++ *prev = node; ++ ++ spin_unlock_irqrestore(&contr->lock, flags); ++ ++ return 0; ++} ++ ++int request_irq(unsigned int irq, ++ irq_handler_t handler, ++ unsigned long flags, const char *devname, void *dev_id) ++{ ++ struct irq_node *node = get_irq_node(); ++ int res; ++ ++ if (!node) { ++ printk(KERN_INFO "%s:get_irq_node error %x\n", ++ __FUNCTION__,(unsigned int) node); ++ return -ENOMEM; ++ } ++ node->handler = handler; ++ node->flags = flags; ++ node->dev_id = dev_id; ++ node->devname = devname; ++ ++ res = setup_irq(irq, node); ++ if (res) ++ node->handler = NULL; ++ ++ return res; ++} ++EXPORT_SYMBOL(request_irq); ++ ++void free_irq(unsigned int irq, void *dev_id) ++{ ++ struct irq_controller *contr; ++ struct irq_node **p, *node; ++ unsigned long flags; ++ ++ if (irq >= NR_IRQS || !irq_controller[irq]) { ++ printk(KERN_DEBUG "%s: Incorrect IRQ %d\n", __FUNCTION__, irq); ++ return; ++ } ++ ++ contr = irq_controller[irq]; ++ spin_lock_irqsave(&contr->lock, flags); ++ ++ p = irq_list + irq; ++ while ((node = *p)) { ++ if (node->dev_id == dev_id) ++ break; ++ p = &node->next; ++ } ++ ++ if (node) { ++ *p = node->next; ++ node->handler = NULL; ++ } else ++ printk(KERN_DEBUG "%s: Removing probably wrong IRQ %d\n", ++ __FUNCTION__, irq); ++ ++ if (!irq_list[irq]) { ++ if (contr->shutdown) ++ contr->shutdown(irq); ++ else ++ contr->disable(irq); ++ } ++ ++ spin_unlock_irqrestore(&contr->lock, flags); ++} ++EXPORT_SYMBOL(free_irq); ++ ++void enable_irq(unsigned int irq) ++{ ++ struct irq_controller *contr; ++ unsigned long flags; ++ ++ if (irq >= NR_IRQS || !irq_controller[irq]) { ++ printk(KERN_DEBUG "%s: Incorrect IRQ %d\n", __FUNCTION__, irq); ++ return; ++ } ++ ++ contr = irq_controller[irq]; ++ spin_lock_irqsave(&contr->lock, flags); ++ if (irq_depth[irq]) { ++ if (!--irq_depth[irq]) { ++ if (contr->enable) ++ contr->enable(irq); ++ } ++ } else ++ WARN_ON(1); ++ spin_unlock_irqrestore(&contr->lock, flags); ++} ++EXPORT_SYMBOL(enable_irq); ++ ++void disable_irq(unsigned int irq) ++{ ++ struct irq_controller *contr; ++ unsigned long flags; ++ ++ if (irq >= NR_IRQS || !irq_controller[irq]) { ++ printk(KERN_DEBUG "%s: Incorrect IRQ %d\n", __FUNCTION__, irq); ++ return; ++ } ++ ++ contr = irq_controller[irq]; ++ spin_lock_irqsave(&contr->lock, flags); ++ if (!irq_depth[irq]++) { ++ if (contr->disable) ++ contr->disable(irq); ++ } ++ spin_unlock_irqrestore(&contr->lock, flags); ++} ++EXPORT_SYMBOL(disable_irq); ++ ++void disable_irq_nosync(unsigned int irq) __attribute__((alias("disable_irq"))); ++EXPORT_SYMBOL(disable_irq_nosync); ++ ++ ++unsigned long probe_irq_on(void) ++{ ++ return 0; ++} ++EXPORT_SYMBOL(probe_irq_on); ++ ++int probe_irq_off(unsigned long irqs) ++{ ++ return 0; ++} ++EXPORT_SYMBOL(probe_irq_off); ++ ++asmlinkage void handle_badint(struct pt_regs *regs) ++{ ++ kstat_cpu(0).irqs[0]++; ++ num_spurious++; ++ printk(KERN_DEBUG "unexpected interrupt from %u\n", regs->vector); ++} ++EXPORT_SYMBOL(handle_badint); ++ ++#ifdef CONFIG_M5445X ++/* ++ * M5445X Implementation ++ */ ++void m5445x_irq_enable(unsigned int irq) ++{ ++ /* enable the interrupt hardware */ ++ if (irq < 64) ++ return; ++ ++ /* adjust past non-hardware ints */ ++ irq -= 64; ++ ++ /* check for eport */ ++ if ((irq > 0) && (irq < 8)) { ++ /* enable eport */ ++ MCF_EPORT_EPPAR &= ~(3 << (irq*2)); /* level */ ++ MCF_EPORT_EPDDR &= ~(1 << irq); /* input */ ++ MCF_EPORT_EPIER |= 1 << irq; /* irq enabled */ ++ } ++ ++ if (irq < 64) { ++ /* controller 0 */ ++ MCF_INTC0_ICR(irq) = 0x02; ++ MCF_INTC0_CIMR = irq; ++ } else { ++ /* controller 1 */ ++ irq -= 64; ++ MCF_INTC1_ICR(irq) = 0x02; ++ MCF_INTC1_CIMR = irq; ++ } ++} ++ ++void m5445x_irq_disable(unsigned int irq) ++{ ++ /* disable the interrupt hardware */ ++ if (irq < 64) ++ return; ++ ++ /* adjust past non-hardware ints */ ++ irq -= 64; ++ ++ /* check for eport */ ++ if ((irq > 0) && (irq < 8)) { ++ /* disable eport */ ++ MCF_EPORT_EPIER &= ~(1 << irq); ++ } ++ ++ if (irq < 64) { ++ /* controller 0 */ ++ MCF_INTC0_ICR(irq) = 0x00; ++ MCF_INTC0_SIMR = irq; ++ } else { ++ /* controller 1 */ ++ irq -= 64; ++ MCF_INTC1_ICR(irq) = 0x00; ++ MCF_INTC1_SIMR = irq; ++ } ++} ++#elif defined(CONFIG_M547X_8X) ++/* ++ * M547X_8X Implementation ++ */ ++void m547x_8x_irq_enable(unsigned int irq) ++{ ++ /* enable the interrupt hardware */ ++ if (irq < 64) ++ return; ++ ++ /* adjust past non-hardware ints */ ++ irq -= 64; ++ ++/* JKM -- re-add EPORT later */ ++#if 0 ++ /* check for eport */ ++ if ((irq > 0) && (irq < 8)) { ++ /* enable eport */ ++ MCF_EPORT_EPPAR &= ~(3 << (irq*2)); /* level */ ++ MCF_EPORT_EPDDR &= ~(1 << irq); /* input */ ++ MCF_EPORT_EPIER |= 1 << irq; /* irq enabled */ ++ } ++#endif ++ ++ if (irq < 32) { ++ /* *grumble* don't set low bit of IMRL */ ++ MCF_IMRL &= (~(1 << irq) & 0xfffffffe); ++ } ++ else { ++ MCF_IMRH &= ~(1 << (irq - 32)); ++ } ++} ++ ++void m547x_8x_irq_disable(unsigned int irq) ++{ ++ /* disable the interrupt hardware */ ++ if (irq < 64) ++ return; ++ ++ /* adjust past non-hardware ints */ ++ irq -= 64; ++ ++/* JKM -- re-add EPORT later */ ++#if 0 ++ /* check for eport */ ++ if ((irq > 0) && (irq < 8)) { ++ /* disable eport */ ++ MCF_EPORT_EPIER &= ~(1 << irq); ++ } ++#endif ++ ++ if (irq < 32) ++ MCF_IMRL |= (1 << irq); ++ else ++ MCF_IMRH |= (1 << (irq - 32)); ++} ++#endif +--- /dev/null ++++ b/arch/m68k/coldfire/iomap.c +@@ -0,0 +1,56 @@ ++/* ++ * arch/m68k/coldfire/iomap.c ++ * ++ * Generic coldfire iomap interface ++ * ++ * Based on the sh64 iomap.c by Paul Mundt. ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ */ ++#include <linux/pci.h> ++#include <asm/io.h> ++ ++#if 0 ++void __iomem *__attribute__ ((weak)) ++ioport_map(unsigned long port, unsigned int len) ++{ ++ return (void __iomem *)port; ++} ++EXPORT_SYMBOL(pci_iomap); ++ ++void ioport_unmap(void __iomem *addr) ++{ ++ /* Nothing .. */ ++} ++EXPORT_SYMBOL(pci_iounmap); ++ ++void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max) ++{ ++ unsigned long start = pci_resource_start(dev, bar); ++ unsigned long len = pci_resource_len(dev, bar); ++ unsigned long flags = pci_resource_flags(dev, bar); ++printk(KERN_INFO "PCI_IOMAP: BAR=%d START=0x%lx LEN=0x%lx FLAGS=0x%lx\n", ++ bar, start, len, flags); ++ ++ if (!len) ++ return NULL; ++ if (max && len > max) ++ len = max; ++ if (flags & IORESOURCE_IO) ++ return ioport_map(start, len); ++ if (flags & IORESOURCE_MEM) ++ return (void __iomem *)start; ++ ++ /* What? */ ++ return NULL; ++} ++EXPORT_SYMBOL(ioport_map); ++ ++void pci_iounmap(struct pci_dev *dev, void __iomem *addr) ++{ ++ /* Nothing .. */ ++} ++EXPORT_SYMBOL(ioport_unmap); ++#endif +--- /dev/null ++++ b/arch/m68k/coldfire/m547x_8x-devices.c +@@ -0,0 +1,163 @@ ++/* ++ * arch/m68k/coldfire/m547x_8x-devices.c ++ * ++ * Coldfire M547x/M548x Platform Device Configuration ++ * ++ * Copyright (c) 2008 Freescale Semiconductor, Inc. ++ * Kurt Mahan <kmahan@freescale.com> ++ */ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/platform_device.h> ++#include <linux/fsl_devices.h> ++#include <linux/spi/spi.h> ++ ++#include <asm/coldfire.h> ++#include <asm/mcfsim.h> ++#include <asm/mcfqspi.h> ++ ++ ++#ifdef CONFIG_SPI ++/* ++ * ++ * DSPI ++ * ++ */ ++ ++/* number of supported SPI selects */ ++#define SPI_NUM_CHIPSELECTS 8 ++ ++void coldfire_spi_cs_control(u8 cs, u8 command) ++{ ++ /* nothing special required */ ++} ++ ++#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) ++static struct coldfire_spi_chip spidev_chip_info = { ++ .bits_per_word = 8, ++}; ++#endif ++ ++static struct spi_board_info spi_board_info[] = { ++#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) ++ { ++ .modalias = "spidev", ++ .max_speed_hz = 16000000, /* max clk (SCK) speed in HZ */ ++ .bus_num = 1, ++ .chip_select = 0, /* CS0 */ ++ .controller_data = &spidev_chip_info, ++ } ++#endif ++}; ++ ++static int spi_irq_list[] = { ++ /* IRQ, ICR Offset, ICR Val,Mask */ ++ 64 + ISC_DSPI_OVRFW, ISC_DSPI_OVRFW, 0x18, 0, ++ 64 + ISC_DSPI_RFOF, ISC_DSPI_RFOF, 0x18, 0, ++ 64 + ISC_DSPI_RFDF, ISC_DSPI_RFDF, 0x18, 0, ++ 64 + ISC_DSPI_TFUF, ISC_DSPI_TFUF, 0x18, 0, ++ 64 + ISC_DSPI_TCF, ISC_DSPI_TCF, 0x18, 0, ++ 64 + ISC_DSPI_TFFF, ISC_DSPI_TFFF, 0x18, 0, ++ 64 + ISC_DSPI_EOQF, ISC_DSPI_EOQF, 0x18, 0, ++ 0,0,0,0, ++}; ++ ++static struct coldfire_spi_master coldfire_master_info = { ++ .bus_num = 1, ++ .num_chipselect = SPI_NUM_CHIPSELECTS, ++ .irq_list = spi_irq_list, ++ .irq_source = 0, /* not used */ ++ .irq_vector = 0, /* not used */ ++ .irq_mask = 0, /* not used */ ++ .irq_lp = 0, /* not used */ ++ .par_val = 0, /* not used */ ++ .cs_control = coldfire_spi_cs_control, ++}; ++ ++static struct resource coldfire_spi_resources[] = { ++ [0] = { ++ .name = "spi-par", ++ .start = MCF_MBAR + 0x00000a50, /* PAR_DSPI */ ++ .end = MCF_MBAR + 0x00000a50, /* PAR_DSPI */ ++ .flags = IORESOURCE_MEM ++ }, ++ ++ [1] = { ++ .name = "spi-module", ++ .start = MCF_MBAR + 0x00008a00, /* DSPI MCR Base */ ++ .end = MCF_MBAR + 0x00008ab8, /* DSPI mem map end */ ++ .flags = IORESOURCE_MEM ++ }, ++ ++ [2] = { ++ .name = "spi-int-level", ++ .start = MCF_MBAR + 0x740, /* ICR start */ ++ .end = MCF_MBAR + 0x740 + ISC_DSPI_EOQF, /* ICR end */ ++ .flags = IORESOURCE_MEM ++ }, ++ ++ [3] = { ++ .name = "spi-int-mask", ++ .start = MCF_MBAR + 0x70c, /* IMRL */ ++ .end = MCF_MBAR + 0x70c, /* IMRL */ ++ .flags = IORESOURCE_MEM ++ } ++}; ++ ++static struct platform_device coldfire_spi = { ++ .name = "spi_coldfire", ++ .id = -1, ++ .resource = coldfire_spi_resources, ++ .num_resources = ARRAY_SIZE(coldfire_spi_resources), ++ .dev = { ++ .platform_data = &coldfire_master_info, ++ } ++}; ++ ++/** ++ * m547x_8x_spi_init - Initialize SPI ++ */ ++static int __init m547x_8x_spi_init(void) ++{ ++ int retval; ++ ++ /* initialize the DSPI PAR */ ++ MCF_GPIO_PAR_DSPI = (MCF_GPIO_PAR_DSPI_PAR_CS5 | ++ MCF_GPIO_PAR_DSPI_PAR_CS3_DSPICS | ++ MCF_GPIO_PAR_DSPI_PAR_CS2_DSPICS | ++ MCF_GPIO_PAR_DSPI_PAR_CS0_DSPICS | ++ MCF_GPIO_PAR_DSPI_PAR_SCK_SCK | ++ MCF_GPIO_PAR_DSPI_PAR_SIN_SIN | ++ MCF_GPIO_PAR_DSPI_PAR_SOUT_SOUT); ++ ++ /* register device */ ++ retval = platform_device_register(&coldfire_spi); ++ if (retval < 0) { ++ goto out; ++ } ++ ++ /* register board info */ ++ if (ARRAY_SIZE(spi_board_info)) ++ retval = spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); ++ ++out: ++ return retval; ++} ++#endif ++ ++ ++/** ++ * m547x_8x_init_devices - Initialize M547X_8X devices ++ * ++ * Returns 0 on success. ++ */ ++static int __init m547x_8x_init_devices(void) ++{ ++#ifdef CONFIG_SPI ++ m547x_8x_spi_init(); ++#endif ++ ++ return 0; ++} ++arch_initcall(m547x_8x_init_devices); +--- /dev/null ++++ b/arch/m68k/coldfire/m547x_8x-dma.c +@@ -0,0 +1,516 @@ ++/* ++ * arch/m68k/coldfire/m547x_8x-dma.c ++ * ++ * Coldfire M547x/M548x DMA ++ * ++ * Copyright (c) 2008 Freescale Semiconductor, Inc. ++ * Kurt Mahan <kmahan@freescale.com> ++ * ++ * This code is based on patches from the Freescale M547x_8x BSP ++ * release mcf547x_8x-20070107-ltib.iso ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ ++#include <linux/kernel.h> ++#include <linux/sched.h> ++#include <linux/mm.h> ++#include <linux/init.h> ++#include <linux/interrupt.h> ++#include <asm/io.h> ++#include <asm/irq.h> ++#include <asm/dma.h> ++#include <asm/coldfire.h> ++#include <asm/m5485sram.h> ++#include <asm/mcfsim.h> ++ ++/* ++ * This global keeps track of which initiators have been ++ * used of the available assignments. Initiators 0-15 are ++ * hardwired. Initiators 16-31 are multiplexed and controlled ++ * via the Initiatior Mux Control Registe (IMCR). The ++ * assigned requestor is stored with the associated initiator ++ * number. ++ */ ++static int used_reqs[32] = { ++ DMA_ALWAYS, DMA_DSPI_RX, DMA_DSPI_TX, DMA_DREQ0, ++ DMA_PSC0_RX, DMA_PSC0_TX, DMA_USBEP0, DMA_USBEP1, ++ DMA_USBEP2, DMA_USBEP3, DMA_PCI_TX, DMA_PCI_RX, ++ DMA_PSC1_RX, DMA_PSC1_TX, DMA_I2C_RX, DMA_I2C_TX, ++ 0, 0, 0, 0, ++ 0, 0, 0, 0, ++ 0, 0, 0, 0, ++ 0, 0, 0, 0 ++}; ++ ++/* ++ * This global keeps track of which channels have been assigned ++ * to tasks. This methology assumes that no single initiator ++ * will be tied to more than one task/channel ++ */ ++static char used_channel[16] = { ++ -1, -1, -1, -1, -1, -1, -1, -1, ++ -1, -1, -1, -1, -1, -1, -1, -1 ++}; ++ ++unsigned int connected_channel[16] = { ++ 0, 0, 0, 0, 0, 0, 0, 0, ++ 0, 0, 0, 0, 0, 0, 0, 0 ++}; ++ ++/** ++ * dma_set_initiator - enable initiator ++ * @initiator: initiator identifier ++ * ++ * Returns 0 of successful, non-zero otherwise ++ * ++ * Attempt to enable the provided Initiator in the Initiator ++ * Mux Control Register. ++ */ ++int dma_set_initiator(int initiator) ++{ ++ switch (initiator) { ++ case DMA_ALWAYS: ++ case DMA_DSPI_RX: ++ case DMA_DSPI_TX: ++ case DMA_DREQ0: ++ case DMA_PSC0_RX: ++ case DMA_PSC0_TX: ++ case DMA_USBEP0: ++ case DMA_USBEP1: ++ case DMA_USBEP2: ++ case DMA_USBEP3: ++ case DMA_PCI_TX: ++ case DMA_PCI_RX: ++ case DMA_PSC1_RX: ++ case DMA_PSC1_TX: ++ case DMA_I2C_RX: ++ case DMA_I2C_TX: ++ /* ++ * These initiators are always active ++ */ ++ break; ++ ++ case DMA_FEC0_RX: ++ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC16(3)) ++ | MCF_DMA_IMCR_SRC16_FEC0RX; ++ used_reqs[16] = DMA_FEC0_RX; ++ break; ++ ++ case DMA_FEC0_TX: ++ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC17(3)) ++ | MCF_DMA_IMCR_SRC17_FEC0TX; ++ used_reqs[17] = DMA_FEC0_TX; ++ break; ++ ++ case DMA_FEC1_RX: ++ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC20(3)) ++ | MCF_DMA_IMCR_SRC20_FEC1RX; ++ used_reqs[20] = DMA_FEC1_RX; ++ break; ++ ++ case DMA_FEC1_TX: ++ if (used_reqs[21] == 0) { ++ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC21(3)) ++ | MCF_DMA_IMCR_SRC21_FEC1TX; ++ used_reqs[21] = DMA_FEC1_TX; ++ } else if (used_reqs[25] == 0) { ++ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC25(3)) ++ | MCF_DMA_IMCR_SRC25_FEC1TX; ++ used_reqs[25] = DMA_FEC1_TX; ++ } else if (used_reqs[31] == 0) { ++ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC31(3)) ++ | MCF_DMA_IMCR_SRC31_FEC1TX; ++ used_reqs[31] = DMA_FEC1_TX; ++ } else /* No empty slots */ ++ return 1; ++ break; ++ ++ case DMA_DREQ1: ++ if (used_reqs[29] == 0) { ++ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC29(3)) ++ | MCF_DMA_IMCR_SRC29_DREQ1; ++ used_reqs[29] = DMA_DREQ1; ++ } else if (used_reqs[21] == 0) { ++ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC21(3)) ++ | MCF_DMA_IMCR_SRC21_DREQ1; ++ used_reqs[21] = DMA_DREQ1; ++ } else /* No empty slots */ ++ return 1; ++ break; ++ ++ case DMA_CTM0: ++ if (used_reqs[24] == 0) { ++ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC24(3)) ++ | MCF_DMA_IMCR_SRC24_CTM0; ++ used_reqs[24] = DMA_CTM0; ++ } else /* No empty slots */ ++ return 1; ++ break; ++ ++ case DMA_CTM1: ++ if (used_reqs[25] == 0) { ++ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC25(3)) ++ | MCF_DMA_IMCR_SRC25_CTM1; ++ used_reqs[25] = DMA_CTM1; ++ } else /* No empty slots */ ++ return 1; ++ break; ++ ++ case DMA_CTM2: ++ if (used_reqs[26] == 0) { ++ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC26(3)) ++ | MCF_DMA_IMCR_SRC26_CTM2; ++ used_reqs[26] = DMA_CTM2; ++ } else /* No empty slots */ ++ return 1; ++ break; ++ ++ case DMA_CTM3: ++ if (used_reqs[27] == 0) { ++ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC27(3)) ++ | MCF_DMA_IMCR_SRC27_CTM3; ++ used_reqs[27] = DMA_CTM3; ++ } else /* No empty slots */ ++ return 1; ++ break; ++ ++ case DMA_CTM4: ++ if (used_reqs[28] == 0) { ++ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC28(3)) ++ | MCF_DMA_IMCR_SRC28_CTM4; ++ used_reqs[28] = DMA_CTM4; ++ } else /* No empty slots */ ++ return 1; ++ break; ++ ++ case DMA_CTM5: ++ if (used_reqs[29] == 0) { ++ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC29(3)) ++ | MCF_DMA_IMCR_SRC29_CTM5; ++ used_reqs[29] = DMA_CTM5; ++ } else /* No empty slots */ ++ return 1; ++ break; ++ ++ case DMA_CTM6: ++ if (used_reqs[30] == 0) { ++ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC30(3)) ++ | MCF_DMA_IMCR_SRC30_CTM6; ++ used_reqs[30] = DMA_CTM6; ++ } else /* No empty slots */ ++ return 1; ++ break; ++ ++ case DMA_CTM7: ++ if (used_reqs[31] == 0) { ++ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC31(3)) ++ | MCF_DMA_IMCR_SRC31_CTM7; ++ used_reqs[31] = DMA_CTM7; ++ } else /* No empty slots */ ++ return 1; ++ break; ++ ++ case DMA_USBEP4: ++ if (used_reqs[26] == 0) { ++ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC26(3)) ++ | MCF_DMA_IMCR_SRC26_USBEP4; ++ used_reqs[26] = DMA_USBEP4; ++ } else /* No empty slots */ ++ return 1; ++ break; ++ ++ case DMA_USBEP5: ++ if (used_reqs[27] == 0) { ++ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC27(3)) ++ | MCF_DMA_IMCR_SRC27_USBEP5; ++ used_reqs[27] = DMA_USBEP5; ++ } else /* No empty slots */ ++ return 1; ++ break; ++ ++ case DMA_USBEP6: ++ if (used_reqs[28] == 0) { ++ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC28(3)) ++ | MCF_DMA_IMCR_SRC28_USBEP6; ++ used_reqs[28] = DMA_USBEP6; ++ } else /* No empty slots */ ++ return 1; ++ break; ++ ++ case DMA_PSC2_RX: ++ if (used_reqs[28] == 0) { ++ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC28(3)) ++ | MCF_DMA_IMCR_SRC28_PSC2RX; ++ used_reqs[28] = DMA_PSC2_RX; ++ } else /* No empty slots */ ++ return 1; ++ break; ++ ++ case DMA_PSC2_TX: ++ if (used_reqs[29] == 0) { ++ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC29(3)) ++ | MCF_DMA_IMCR_SRC29_PSC2TX; ++ used_reqs[29] = DMA_PSC2_TX; ++ } else /* No empty slots */ ++ return 1; ++ break; ++ ++ case DMA_PSC3_RX: ++ if (used_reqs[30] == 0) { ++ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC30(3)) ++ | MCF_DMA_IMCR_SRC30_PSC3RX; ++ used_reqs[30] = DMA_PSC3_RX; ++ } else /* No empty slots */ ++ return 1; ++ break; ++ ++ case DMA_PSC3_TX: ++ if (used_reqs[31] == 0) { ++ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC31(3)) ++ | MCF_DMA_IMCR_SRC31_PSC3TX; ++ used_reqs[31] = DMA_PSC3_TX; ++ } else /* No empty slots */ ++ return 1; ++ break; ++ ++ default: ++ return 1; ++ } ++ return 0; ++} ++ ++/** ++ * dma_get_initiator - get the initiator for the given requestor ++ * @requestor: initiator identifier ++ * ++ * Returns initiator number (0-31) if assigned or just 0 ++ */ ++unsigned int dma_get_initiator(int requestor) ++{ ++ u32 i; ++ ++ for (i = 0; i < sizeof(used_reqs); ++i) { ++ if (used_reqs[i] == requestor) ++ return i; ++ } ++ return 0; ++} ++ ++/** ++ * dma_remove_initiator - remove the given initiator from active list ++ * @requestor: requestor to remove ++ */ ++void dma_remove_initiator(int requestor) ++{ ++ u32 i; ++ ++ for (i = 0; i < sizeof(used_reqs); ++i) { ++ if (used_reqs[i] == requestor) { ++ used_reqs[i] = -1; ++ break; ++ } ++ } ++} ++ ++/** ++ * dma_set_channel_fec: find available channel for fec and mark ++ * @requestor: initiator/requestor identifier ++ * ++ * Returns first avaialble channel (0-5) or -1 if all occupied ++ */ ++int dma_set_channel_fec(int requestor) ++{ ++ u32 i, t; ++ ++#ifdef CONFIG_FEC_548x_ENABLE_FEC2 ++ t = 4; ++#else ++ t = 2; ++#endif ++ ++ for (i = 0; i < t ; ++i) { ++ if (used_channel[i] == -1) { ++ used_channel[i] = requestor; ++ return i; ++ } ++ } ++ /* All channels taken */ ++ return -1; ++} ++ ++/** ++ * dma_set_channel - find an available channel and mark as used ++ * @requestor: initiator/requestor identifier ++ * ++ * Returns first available channel (6-15) or -1 if all occupied ++ */ ++int dma_set_channel(int requestor) ++{ ++ u32 i; ++#ifdef CONFIG_NET_FEC2 ++ i = 4; ++#else ++ i = 2; ++#endif ++ ++ for (; i < 16; ++i) ++ if (used_channel[i] == -1) { ++ used_channel[i] = requestor; ++ return i; ++ } ++ ++ /* All channels taken */ ++ return -1; ++} ++ ++/** ++ * dma_get_channel - get the channel being initiated by the requestor ++ * @requestor: initiator/requestor identifier ++ * ++ * Returns Initiator for requestor or -1 if not found ++ */ ++int dma_get_channel(int requestor) ++{ ++ u32 i; ++ ++ for (i = 0; i < sizeof(used_channel); ++i) { ++ if (used_channel[i] == requestor) ++ return i; ++ } ++ return -1; ++} ++ ++/** ++ * dma_connect - connect a channel with reference on data ++ * @channel: channel number ++ * @address: reference address of data ++ * ++ * Returns 0 if success or -1 if invalid channel ++ */ ++int dma_connect(int channel, int address) ++{ ++ if ((channel < 16) && (channel >= 0)) { ++ connected_channel[channel] = address; ++ return 0; ++ } ++ return -1; ++} ++ ++/** ++ * dma_disconnect - disconnect a channel ++ * @channel: channel number ++ * ++ * Returns 0 if success or -1 if invalid channel ++ */ ++int dma_disconnect(int channel) ++{ ++ if ((channel < 16) && (channel >= 0)) { ++ connected_channel[channel] = 0; ++ return 0; ++ } ++ return -1; ++} ++ ++/** ++ * dma_remove_channel - remove channel from the active list ++ * @requestor: initiator/requestor identifier ++ */ ++void dma_remove_channel(int requestor) ++{ ++ u32 i; ++ ++ for (i = 0; i < sizeof(used_channel); ++i) { ++ if (used_channel[i] == requestor) { ++ used_channel[i] = -1; ++ break; ++ } ++ } ++} ++ ++/** ++ * dma_interrupt_handler - dma interrupt handler ++ * @irq: interrupt number ++ * @dev_id: data ++ * ++ * Returns IRQ_HANDLED ++ */ ++irqreturn_t dma_interrupt_handler(int irq, void *dev_id) ++{ ++ u32 i, interrupts; ++ ++ /* ++ * Determine which interrupt(s) triggered by AND'ing the ++ * pending interrupts with those that aren't masked. ++ */ ++ interrupts = MCF_DMA_DIPR; ++ MCF_DMA_DIPR = interrupts; ++ ++ for (i = 0; i < 16; ++i, interrupts >>= 1) { ++ if (interrupts & 0x1) ++ if (connected_channel[i] != 0) ++ ((void (*)(void)) (connected_channel[i])) (); ++ } ++ ++ return IRQ_HANDLED; ++} ++ ++/** ++ * dma_remove_channel_by_number - clear dma channel ++ * @channel: channel number to clear ++ */ ++void dma_remove_channel_by_number(int channel) ++{ ++ if ((channel < sizeof(used_channel)) && (channel >= 0)) ++ used_channel[channel] = -1; ++} ++ ++/** ++ * dma_init - initialize the dma subsystem ++ * ++ * Returns 0 if success non-zero if failure ++ * ++ * Handles the DMA initialization during device setup. ++ */ ++int __devinit dma_init() ++{ ++ int result; ++ char *dma_version_str; ++ ++ MCD_getVersion(&dma_version_str); ++ printk(KERN_INFO "m547x_8x DMA: Initialize %s\n", dma_version_str); ++ ++ /* attempt to setup dma interrupt handler */ ++ if (request_irq(64 + ISC_DMA, dma_interrupt_handler, IRQF_DISABLED, ++ "MCD-DMA", NULL)) { ++ printk(KERN_ERR "MCD-DMA: Cannot allocate the DMA IRQ(48)\n"); ++ return 1; ++ } ++ ++ MCF_DMA_DIMR = 0; ++ MCF_DMA_DIPR = 0xFFFFFFFF; ++ ++ MCF_ICR(ISC_DMA) = ILP_DMA; ++ ++ result = MCD_initDma((dmaRegs *) (MCF_MBAR + 0x8000), ++ (void *) SYS_SRAM_DMA_START, MCD_RELOC_TASKS); ++ if (result != MCD_OK) { ++ printk(KERN_ERR "MCD-DMA: Cannot perform DMA initialization\n"); ++ free_irq(64 + ISC_DMA, NULL); ++ return 1; ++ } ++ ++ return 0; ++} ++device_initcall(dma_init); +--- /dev/null ++++ b/arch/m68k/coldfire/Makefile +@@ -0,0 +1,20 @@ ++# ++# Makefile for Linux arch/m68k/coldfire source directory ++# ++ ++obj-y:= entry.o config.o cache.o signal.o muldi3.o traps.o ints.o ++ifdef CONFIG_M5445X ++ifneq ($(strip $(CONFIG_USB) $(CONFIG_USB_GADGET_MCF5445X)),) ++ obj-y += usb.o usb/ ++endif ++endif ++ ++ifdef CONFIG_M547X_8X ++obj-$(CONFIG_PCI) += mcf548x-pci.o ++else ++obj-$(CONFIG_PCI) += pci.o mcf5445x-pci.o iomap.o ++endif ++obj-$(CONFIG_M5445X) += mcf5445x-devices.o ++obj-$(CONFIG_M547X_8X) += m547x_8x-devices.o ++obj-$(CONFIG_M547X_8X) += mcf548x-devices.o ++obj-$(CONFIG_MCD_DMA) += m547x_8x-dma.o +--- /dev/null ++++ b/arch/m68k/coldfire/mcf5445x-devices.c +@@ -0,0 +1,136 @@ ++/* ++ * arch/m68k/coldfire/mcf5445x-devices.c ++ * ++ * Coldfire M5445x Platform Device Configuration ++ * ++ * Based on the Freescale MXC devices.c ++ * ++ * Copyright (c) 2007 Freescale Semiconductor, Inc. ++ * Kurt Mahan <kmahan@freescale.com> ++ */ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/platform_device.h> ++#include <linux/fsl_devices.h> ++ ++#include <asm/coldfire.h> ++#include <asm/mcfsim.h> ++ ++/* ATA Interrupt */ ++#define IRQ_ATA (64 + 64 + 54) ++ ++/* ATA Base */ ++#define BASE_IO_ATA 0x90000000 ++ ++#define ATA_IER MCF_REG08(BASE_IO_ATA+0x2c) /* int enable reg */ ++#define ATA_ICR MCF_REG08(BASE_IO_ATA+0x30) /* int clear reg */ ++ ++/* ++ * On-chip PATA ++ */ ++#if defined(CONFIG_PATA_FSL) || defined(CONFIG_PATA_FSL_MODULE) ++static int ata_init(struct platform_device *pdev) ++{ ++ /* clear ints */ ++ ATA_IER = 0x00; ++ ATA_ICR = 0xff; ++ ++ /* setup shared pins */ ++ MCF_GPIO_PAR_FEC = (MCF_GPIO_PAR_FEC & MCF_GPIO_PAR_FEC_FEC1_MASK) | ++ MCF_GPIO_PAR_FEC_FEC1_ATA; ++ ++ MCF_GPIO_PAR_FECI2C = (MCF_GPIO_PAR_FECI2C & ++ (MCF_GPIO_PAR_FECI2C_MDC1_MASK & ++ MCF_GPIO_PAR_FECI2C_MDIO1_MASK)) | ++ MCF_GPIO_PAR_FECI2C_MDC1_ATA_DIOR | ++ MCF_GPIO_PAR_FECI2C_MDIO1_ATA_DIOW; ++ ++ MCF_GPIO_PAR_ATA = MCF_GPIO_PAR_ATA_BUFEN | ++ MCF_GPIO_PAR_ATA_CS1 | ++ MCF_GPIO_PAR_ATA_CS0 | ++ MCF_GPIO_PAR_ATA_DA2 | ++ MCF_GPIO_PAR_ATA_DA1 | ++ MCF_GPIO_PAR_ATA_DA0 | ++ MCF_GPIO_PAR_ATA_RESET_RESET | ++ MCF_GPIO_PAR_ATA_DMARQ_DMARQ | ++ MCF_GPIO_PAR_ATA_IORDY_IORDY; ++ ++ MCF_GPIO_PAR_PCI = (MCF_GPIO_PAR_PCI & ++ (MCF_GPIO_PAR_PCI_GNT3_MASK & ++ MCF_GPIO_PAR_PCI_REQ3_MASK)) | ++ MCF_GPIO_PAR_PCI_GNT3_ATA_DMACK | ++ MCF_GPIO_PAR_PCI_REQ3_ATA_INTRQ; ++ ++ return 0; ++} ++ ++static void ata_exit(void) ++{ ++ printk(KERN_INFO "** ata_exit\n"); ++} ++ ++static int ata_get_clk_rate(void) ++{ ++ return MCF_BUSCLK; ++} ++ ++/* JKM -- move these to a header file */ ++#define MCF_IDE_DMA_WATERMARK 32 /* DMA watermark level in bytes */ ++#define MCF_IDE_DMA_BD_NR (512/3/4) /* number of BDs per channel */ ++ ++static struct fsl_ata_platform_data ata_data = { ++ .init = ata_init, ++ .exit = ata_exit, ++ .get_clk_rate = ata_get_clk_rate, ++#ifdef CONFIG_PATA_FSL_USE_DMA ++ .udma_mask = 0x0F, /* the board handles up to UDMA3 */ ++ .fifo_alarm = MCF_IDE_DMA_WATERMARK / 2, ++ .max_sg = MCF_IDE_DMA_BD_NR, ++#endif ++}; ++ ++static struct resource pata_fsl_resources[] = { ++ [0] = { /* I/O */ ++ .start = BASE_IO_ATA, ++ .end = BASE_IO_ATA + 0x000000d8, ++ .flags = IORESOURCE_MEM, ++ }, ++ [2] = { /* IRQ */ ++ .start = IRQ_ATA, ++ .end = IRQ_ATA, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device pata_fsl_device = { ++ .name = "pata_fsl", ++ .id = -1, ++ .num_resources = ARRAY_SIZE(pata_fsl_resources), ++ .resource = pata_fsl_resources, ++ .dev = { ++ .platform_data = &ata_data, ++ .coherent_dma_mask = ~0, /* $$$ REVISIT */ ++ }, ++}; ++ ++static inline void mcf5445x_init_pata(void) ++{ ++ (void)platform_device_register(&pata_fsl_device); ++} ++#else ++static inline void mcf5445x_init_pata(void) ++{ ++} ++#endif ++ ++static int __init mcf5445x_init_devices(void) ++{ ++ printk(KERN_INFO "MCF5445x INIT_DEVICES\n"); ++#if 0 ++ mcf5445x_init_pata(); ++#endif ++ ++ return 0; ++} ++arch_initcall(mcf5445x_init_devices); +--- /dev/null ++++ b/arch/m68k/coldfire/mcf5445x-pci.c +@@ -0,0 +1,431 @@ ++/* ++ * arch/m68k/coldfire/mcf5445x-pci.c ++ * ++ * Coldfire M5445x specific PCI implementation. ++ * ++ * Copyright (c) 2007 Freescale Semiconductor, Inc. ++ * Kurt Mahan <kmahan@freescale.com> ++ */ ++ ++#include <linux/delay.h> ++#include <linux/interrupt.h> ++#include <linux/pci.h> ++ ++#include <asm/mcfsim.h> ++#include <asm/pci.h> ++#include <asm/irq.h> ++ ++/* ++ * Layout MCF5445x to PCI memory mappings: ++ * ++ * WIN MCF5445x PCI TYPE ++ * --- -------- --- ---- ++ * [0] 0xA0000000 -> 0xA7FFFFFF 0xA0000000 -> 0xA7FFFFFF MEM ++ * [1] 0xA8000000 -> 0xABFFFFFF 0xA8000000 -> 0xABFFFFFF MEM ++ * [2] 0xAC000000 -> 0xAFFFFFFF 0xAC000000 -> 0xAFFFFFFF IO ++ */ ++ ++#define MCF5445X_PCI_MEM_BASE 0xA0000000 ++#define MCF5445X_PCI_MEM_SIZE 0x0C000000 ++ ++#define MCF5445X_PCI_CONFIG_BASE 0xAC000000 ++#define MCF5445X_PCI_CONFIG_SIZE 0x04000000 ++ ++#define MCF5445X_PCI_IO_BASE 0xAC000000 ++#define MCF5445X_PCI_IO_SIZE 0x04000000 ++ ++/* PCI Bus memory resource block */ ++struct resource pci_iomem_resource = { ++ .name = "PCI memory space", ++ .start = MCF5445X_PCI_MEM_BASE, ++ .flags = IORESOURCE_MEM, ++ .end = MCF5445X_PCI_MEM_BASE + MCF5445X_PCI_MEM_SIZE - 1 ++}; ++ ++/* PCI Bus ioport resource block */ ++struct resource pci_ioport_resource = { ++ .name = "PCI I/O space", ++ .start = MCF5445X_PCI_IO_BASE, ++ .flags = IORESOURCE_IO, ++ .end = MCF5445X_PCI_IO_BASE + MCF5445X_PCI_IO_SIZE - 1 ++}; ++ ++/* ++ * The M54455EVB multiplexes all the PCI interrupts via ++ * the FPGA and routes them to a single interrupt. The ++ * PCI spec requires all PCI interrupt routines be smart ++ * enough to sort out their own interrupts. ++ * The interrupt source from the FPGA is configured ++ * to EPORT 3. ++ */ ++#define MCF5445X_PCI_IRQ 0x43 ++ ++#define PCI_SLOTS 4 ++ ++/* ++ * FPGA Info ++ */ ++#define FPGA_PCI_IRQ_ENABLE (u32 *)0x09000000 ++#define FPGA_PCI_IRQ_STATUS (u32 *)0x09000004 ++#define FPGA_PCI_IRQ_ROUTE (u32 *)0x0900000c ++#define FPGA_SEVEN_LED (u32 *)0x09000014 ++ ++extern void set_fpga(u32 *addr, u32 val); ++ ++#ifdef DEBUG ++void mcf5445x_pci_dumpregs(void); ++#endif ++ ++/* ++ * mcf5445x_conf_device(struct pci_dev *dev) ++ * ++ * Machine dependent Configure the given device. ++ * ++ * Parameters: ++ * ++ * dev - the pci device. ++ */ ++void ++mcf5445x_conf_device(struct pci_dev *dev) ++{ ++ set_fpga(FPGA_PCI_IRQ_ENABLE, 0x0f); ++} ++ ++/* ++ * int mcf5445x_pci_config_read(unsigned int seg, unsigned int bus, ++ * unsigned int devfn, int reg, ++ * u32 *value) ++ * ++ * Read from PCI configuration space. ++ * ++ */ ++int mcf5445x_pci_config_read(unsigned int seg, unsigned int bus, ++ unsigned int devfn, int reg, int len, u32 *value) ++{ ++ u32 addr = MCF_PCI_PCICAR_BUSNUM(bus) | ++ MCF_PCI_PCICAR_DEVNUM(PCI_SLOT(devfn)) | ++ MCF_PCI_PCICAR_FUNCNUM(PCI_FUNC(devfn)) | ++ MCF_PCI_PCICAR_DWORD(reg) | ++ MCF_PCI_PCICAR_E; ++ ++ if ((bus > 255) || (devfn > 255) || (reg > 255)) { ++ *value = -1; ++ return -EINVAL; ++ } ++ ++ /* setup for config mode */ ++ MCF_PCI_PCICAR = addr; ++ __asm__ __volatile__("nop"); ++ ++ switch (len) { ++ case 1: ++ *value = *(volatile u8 *)(MCF5445X_PCI_CONFIG_BASE+(reg&3)); ++ break; ++ case 2: ++ *value = le16_to_cpu(*(volatile u16 *) ++ (MCF5445X_PCI_CONFIG_BASE + (reg&2))); ++ break; ++ case 4: ++ *value = le32_to_cpu(*(volatile u32 *) ++ (MCF5445X_PCI_CONFIG_BASE)); ++ break; ++ } ++ ++ /* clear config mode */ ++ MCF_PCI_PCICAR = ~MCF_PCI_PCICAR_E; ++ __asm__ __volatile__("nop"); ++ ++ return 0; ++} ++ ++/* ++ * int mcf5445x_pci_config_write(unsigned int seg, unsigned int bus, ++ * unsigned int devfn, int reg, ++ * u32 *value) ++ * ++ * Write to PCI configuration space ++ */ ++int mcf5445x_pci_config_write(unsigned int seg, unsigned int bus, ++ unsigned int devfn, int reg, int len, u32 value) ++{ ++ u32 addr = MCF_PCI_PCICAR_BUSNUM(bus) | ++ MCF_PCI_PCICAR_DEVNUM(PCI_SLOT(devfn)) | ++ MCF_PCI_PCICAR_FUNCNUM(PCI_FUNC(devfn)) | ++ MCF_PCI_PCICAR_DWORD(reg) | ++ MCF_PCI_PCICAR_E; ++ ++ if ((bus > 255) || (devfn > 255) || (reg > 255)) ++ return -EINVAL; ++ ++ /* setup for config mode */ ++ MCF_PCI_PCICAR = addr; ++ __asm__ __volatile__("nop"); ++ ++ switch (len) { ++ case 1: ++ *(volatile u8 *)(MCF5445X_PCI_CONFIG_BASE+(reg&3)) = (u8)value; ++ break; ++ case 2: ++ *(volatile u16 *)(MCF5445X_PCI_CONFIG_BASE+(reg&2)) = ++ cpu_to_le16((u16)value); ++ break; ++ case 4: ++ *(volatile u32 *)(MCF5445X_PCI_CONFIG_BASE) = ++ cpu_to_le32(value); ++ break; ++ } ++ ++ /* clear config mode */ ++ MCF_PCI_PCICAR = ~MCF_PCI_PCICAR_E; ++ __asm__ __volatile__("nop"); ++ ++ return 0; ++} ++ ++/* hardware operations */ ++static struct pci_raw_ops mcf5445x_pci_ops = { ++ .read = mcf5445x_pci_config_read, ++ .write = mcf5445x_pci_config_write, ++}; ++ ++/* ++ * irqreturn_t mcf5445x_pci_interrupt( int irq, void *dev) ++ * ++ * PCI controller interrupt handler. ++ */ ++static irqreturn_t ++mcf5445x_pci_interrupt(int irq, void *dev) ++{ ++ u32 status = MCF_PCI_PCIGSCR; ++#ifdef DEBUG ++ printk(KERN_INFO "PCI: Controller irq status=0x%08x\n", status); ++#endif ++ /* clear */ ++ MCF_PCI_PCIGSCR = status; ++ ++ return IRQ_HANDLED; ++} ++ ++/* ++ * irqreturn_t mcf5445x_pci_arb_interrupt( int irq, void *dev) ++ * ++ * PCI Arbiter interrupt handler. ++ */ ++static irqreturn_t ++mcf5445x_pci_arb_interrupt(int irq, void *dev) ++{ ++ u32 status = MCF_PCIARB_PASR; ++#ifdef DEBUG ++ printk(KERN_INFO "PCI: Arbiter irq status=0x%08x\n", status); ++#endif ++ /* clear */ ++ MCF_PCIARB_PASR = status; ++ return IRQ_HANDLED; ++} ++ ++/* ++ * struct pci_bus_info *init_mcf5445x_pci(void) ++ * ++ * Machine specific initialisation: ++ * ++ * - Allocate and initialise a 'pci_bus_info' structure ++ * - Initialize hardware ++ * ++ * Result: pointer to 'pci_bus_info' structure. ++ */ ++int __init ++init_mcf5445x_pci(void) ++{ ++ return 0; ++#if 0 ++ /* ++ * Initialize the PCI core ++ */ ++ ++ /* arbitration controller */ ++ MCF_PCIARB_PACR = MCF_PCIARB_PACR_INTMPRI | ++ MCF_PCIARB_PACR_EXTMPRI(0x0f) | ++ MCF_PCIARB_PACR_INTMINTEN | ++ MCF_PCIARB_PACR_EXTMINTEN(0x0f); ++ ++ /* pci pin assignment regs */ ++ MCF_GPIO_PAR_PCI = MCF_GPIO_PAR_PCI_GNT0 | ++ MCF_GPIO_PAR_PCI_GNT1 | ++ MCF_GPIO_PAR_PCI_GNT2 | ++ MCF_GPIO_PAR_PCI_GNT3_GNT3 | ++ MCF_GPIO_PAR_PCI_REQ0 | ++ MCF_GPIO_PAR_PCI_REQ1 | ++ MCF_GPIO_PAR_PCI_REQ2 | ++ MCF_GPIO_PAR_PCI_REQ3_REQ3; ++ ++ /* target control reg */ ++ MCF_PCI_PCITCR = MCF_PCI_PCITCR_P | ++ MCF_PCI_PCITCR_WCT(8); ++ ++ /* PCI MEM address */ ++ MCF_PCI_PCIIW0BTAR = 0xA007A000; ++ ++ /* PCI MEM address */ ++ MCF_PCI_PCIIW1BTAR = 0xA803A800; ++ ++ /* PCI IO address */ ++ MCF_PCI_PCIIW2BTAR = 0xAC03AC00; ++ ++ /* window control */ ++ MCF_PCI_PCIIWCR = MCF_PCI_PCIIWCR_WINCTRL0_ENABLE | ++ MCF_PCI_PCIIWCR_WINCTRL0_MEMREAD | ++ MCF_PCI_PCIIWCR_WINCTRL1_ENABLE | ++ MCF_PCI_PCIIWCR_WINCTRL1_MEMREAD | ++ MCF_PCI_PCIIWCR_WINCTRL2_ENABLE | ++ MCF_PCI_PCIIWCR_WINCTRL2_IO; ++ ++ /* initiator control reg */ ++ MCF_PCI_PCIICR = 0x00ff; ++ ++ /* type 0 - command */ ++ MCF_PCI_PCISCR = MCF_PCI_PCISCR_MW | /* mem write/inval */ ++ MCF_PCI_PCISCR_B | /* bus master enable */ ++ MCF_PCI_PCISCR_M; /* mem access enable */ ++ ++ /* type 0 - config reg */ ++ MCF_PCI_PCICR1 = MCF_PCI_PCICR1_CACHELINESIZE(8) | ++ MCF_PCI_PCICR1_LATTIMER(0xff); ++ ++ /* type 0 - config 2 reg */ ++ MCF_PCI_PCICR2 = 0; ++ ++ /* target control reg */ ++ MCF_PCI_PCITCR2 = MCF_PCI_PCITCR2_B0E | ++ MCF_PCI_PCITCR2_B4E; ++ ++ /* translate addresses from PCI[0] to CF[SDRAM] */ ++ MCF_PCI_PCITBATR0 = MCF_RAMBAR1 | MCF_PCI_PCITBATR0_EN; ++ MCF_PCI_PCITBATR4 = MCF_RAMBAR1 | MCF_PCI_PCITBATR4_EN; ++ ++ /* setup controller interrupt handlers */ ++ if (request_irq(55+128, mcf5445x_pci_interrupt, IRQF_SHARED, ++ "PCI Controller", NULL)) ++ printk(KERN_ERR "PCI: Unable to register controller irq\n"); ++ ++ if (request_irq (56+128, mcf5445x_pci_arb_interrupt, IRQF_SHARED, "PCI Arbiter", NULL)) ++ printk(KERN_ERR "PCI: Unable to register arbiter irq\n"); ++ ++ /* global control - clear reset bit */ ++ MCF_PCI_PCIGSCR = MCF_PCI_PCIGSCR_SEE | ++ MCF_PCI_PCIGSCR_PEE; ++ ++ /* let everything settle */ ++ udelay(1000); ++ ++ /* allocate bus ioport resource */ ++ if (request_resource(&ioport_resource, &pci_ioport_resource) < 0) ++ printk(KERN_ERR "PCI: Unable to alloc ioport resource\n"); ++ ++ /* allocate bus iomem resource */ ++ if (request_resource(&iomem_resource, &pci_iomem_resource) < 0) ++ printk(KERN_ERR "PCI: Unable to alloc iomem resource\n"); ++ ++ /* setup FPGA to route PCI to IRQ3(67), SW7 to IRQ7, SW6 to IRQ4 */ ++ set_fpga(FPGA_PCI_IRQ_ENABLE, 0x00000000); ++ set_fpga(FPGA_PCI_IRQ_ROUTE, 0x00000039); ++ set_fpga(FPGA_SEVEN_LED, 0x000000FF); ++ ++ raw_pci_ops = &mcf5445x_pci_ops; ++ ++ return 0; ++#endif ++} ++ ++/* ++ * DEBUGGING ++ */ ++ ++#ifdef DEBUG ++struct regdump { ++ u32 addr; ++ char regname[16]; ++}; ++ ++struct regdump type0regs[] = { ++ { 0xfc0a8000, "PCIIDR" }, ++ { 0xfc0a8004, "PCISCR" }, ++ { 0xfc0a8008, "PCICCRIR" }, ++ { 0xfc0a800c, "PCICR1" }, ++ { 0xfc0a8010, "PCIBAR0" }, ++ { 0xfc0a8014, "PCIBAR1" }, ++ { 0xfc0a8018, "PCIBAR2" }, ++ { 0xfc0a801c, "PCIBAR3" }, ++ { 0xfc0a8020, "PCIBAR4" }, ++ { 0xfc0a8024, "PCIBAR5" }, ++ { 0xfc0a8028, "PCICCPR" }, ++ { 0xfc0a802c, "PCISID" }, ++ { 0xfc0a8030, "PCIERBAR" }, ++ { 0xfc0a8034, "PCICPR" }, ++ { 0xfc0a803c, "PCICR2" }, ++ { 0, "" } ++}; ++ ++struct regdump genregs[] = { ++ { 0xfc0a8060, "PCIGSCR" }, ++ { 0xfc0a8064, "PCITBATR0" }, ++ { 0xfc0a8068, "PCITBATR1" }, ++ { 0xfc0a806c, "PCITCR1" }, ++ { 0xfc0a8070, "PCIIW0BTAR" }, ++ { 0xfc0a8074, "PCIIW1BTAR" }, ++ { 0xfc0a8078, "PCIIW2BTAR" }, ++ { 0xfc0a8080, "PCIIWCR" }, ++ { 0xfc0a8084, "PCIICR" }, ++ { 0xfc0a8088, "PCIISR" }, ++ { 0xfc0a808c, "PCITCR2" }, ++ { 0xfc0a8090, "PCITBATR0" }, ++ { 0xfc0a8094, "PCITBATR1" }, ++ { 0xfc0a8098, "PCITBATR2" }, ++ { 0xfc0a809c, "PCITBATR3" }, ++ { 0xfc0a80a0, "PCITBATR4" }, ++ { 0xfc0a80a4, "PCITBATR5" }, ++ { 0xfc0a80a8, "PCIINTR" }, ++ { 0xfc0a80f8, "PCICAR" }, ++ { 0, "" } ++}; ++ ++struct regdump arbregs[] = { ++ { 0xfc0ac000, "PACR" }, ++ { 0xfc0ac004, "PASR" }, /* documentation error */ ++ { 0, "" } ++}; ++ ++/* ++ * void mcf5445x_pci_dumpregs() ++ * ++ * Dump out all the PCI registers ++ */ ++void ++mcf5445x_pci_dumpregs(void) ++{ ++ struct regdump *reg; ++ ++ printk(KERN_INFO "*** MCF5445x PCI TARGET 0 REGISTERS ***\n"); ++ ++ reg = type0regs; ++ while (reg->addr) { ++ printk(KERN_INFO "0x%08x 0x%08x %s\n", reg->addr, ++ *((u32 *)reg->addr), reg->regname); ++ reg++; ++ } ++ ++ printk(KERN_INFO "\n*** MCF5445x PCI GENERAL REGISTERS ***\n"); ++ reg = genregs; ++ while (reg->addr) { ++ printk(KERN_INFO "0x%08x 0x%08x %s\n", reg->addr, ++ *((u32 *)reg->addr), reg->regname); ++ reg++; ++ } ++ printk(KERN_INFO "\n*** MCF5445x PCI ARBITER REGISTERS ***\n"); ++ reg = arbregs; ++ while (reg->addr) { ++ printk(KERN_INFO "0x%08x 0x%08x %s\n", reg->addr, ++ *((u32 *)reg->addr), reg->regname); ++ reg++; ++ } ++} ++#endif /* DEBUG */ +--- /dev/null ++++ b/arch/m68k/coldfire/mcf548x-devices.c +@@ -0,0 +1,94 @@ ++/* ++ * arch/m68k/coldfire/mcf5445x-devices.c ++ * ++ * Coldfire M5445x Platform Device Configuration ++ * ++ * Based on the Freescale MXC devices.c ++ * ++ * Copyright (c) 2007 Freescale Semiconductor, Inc. ++ * Kurt Mahan <kmahan@freescale.com> ++ */ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/mtd/physmap.h> ++#include <linux/platform_device.h> ++#include <linux/fsl_devices.h> ++ ++#include <asm/coldfire.h> ++#include <asm/mcfsim.h> ++ ++static struct resource coldfire_i2c_resources[] = { ++ [0] = { /* I/O */ ++ .start = MCF_MBAR + 0x008F00, ++ .end = MCF_MBAR + 0x008F20, ++ .flags = IORESOURCE_MEM, ++ }, ++ [2] = { /* IRQ */ ++ .start = 40, ++ .end = 40, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device coldfire_i2c_device = { ++ .name = "MCF548X-i2c", ++ .id = -1, ++ .num_resources = ARRAY_SIZE(coldfire_i2c_resources), ++ .resource = coldfire_i2c_resources, ++}; ++ ++static struct resource coldfire_sec_resources[] = { ++ [0] = { /* I/O */ ++ .start = MCF_MBAR + 0x00020000, ++ .end = MCF_MBAR + 0x00033000, ++ .flags = IORESOURCE_MEM, ++ }, ++ [2] = { /* IRQ */ ++ .start = ISC_SEC, ++ .end = ISC_SEC, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device coldfire_sec_device = { ++ .name = "fsl-sec1", ++ .id = -1, ++ .num_resources = ARRAY_SIZE(coldfire_sec_resources), ++ .resource = coldfire_sec_resources, ++}; ++ ++#if defined(CONFIG_MTD_PHYSMAP) ++static struct physmap_flash_data mcf5485_flash_data = { ++ .width = 2, ++}; ++ ++static struct resource mcf5485_flash_resource = { ++ .start = 0xf8000000, ++ .end = 0xf80fffff, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct platform_device mcf5485_flash_device = { ++ .name = "physmap-flash", ++ .id = 0, ++ .dev = { ++ .platform_data = &mcf5485_flash_data, ++ }, ++ .num_resources = 1, ++ .resource = &mcf5485_flash_resource, ++}; ++#endif ++ ++static int __init mcf5485_init_devices(void) ++{ ++ printk(KERN_INFO "MCF5485x INIT_DEVICES\n"); ++ ++ platform_device_register(&coldfire_i2c_device); ++ platform_device_register(&coldfire_sec_device); ++/*#if defined(CONFIG_MTD_PHYSMAP) ++ platform_device_register(&mcf5485_flash_device); ++#endif*/ ++ return 0; ++} ++arch_initcall(mcf5485_init_devices); +--- /dev/null ++++ b/arch/m68k/coldfire/mcf548x-pci.c +@@ -0,0 +1,959 @@ ++/* ++ * ColdFire 547x/548x PCI Host Controller functions ++ * ++ * Copyright (c) 2005-2008 Freescale Semiconductor, Inc. ++ * ++ * This code is based on the 2.6.10 version of pci.c ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ ++#include <linux/kernel.h> ++#include <linux/types.h> ++#include <linux/init.h> ++#include <linux/mm.h> ++#include <linux/string.h> ++#include <linux/pci.h> ++#include <linux/ioport.h> ++#include <linux/slab.h> ++#include <linux/version.h> ++#include <linux/interrupt.h> ++ ++#include <linux/dma-mapping.h> ++#include <asm/coldfire.h> ++#include <asm/io.h> ++#include <asm/m5485sim.h> ++#include <asm/m5485pci.h> ++#include <asm/irq.h> ++#include <asm/pci.h> ++#include <asm/virtconvert.h> ++ ++ ++#undef DEBUG ++//#define DEBUG ++ ++#ifdef DEBUG ++//#define DBG(x...) printk(KERN_DEBUG x) ++#define DBG(x...) printk(x) ++#else ++#define DBG(x...) ++#endif ++ ++#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2,5,75)) ++# define irqreturn_t void ++# define IRQ_HANDLED ++# define IRQ_NONE ++#endif ++ ++/* ++ * Bridge configration dafaults ++ */ ++#define PCI_RETRIES 0 ++#define PCI_CACHE_LINE 8 ++#define PCI_MINGNT 1 ++#define PCI_MAXLAT 42 ++ ++ ++/* ++ * Initiator windows setting ++ */ ++#define HOST_MEM_BASE 0xD0000000 /* ColdFire Memory window base */ ++#define PCI_MEM_BASE 0xD0000000 /* PCI Memory window base */ ++#define PCI_MEM_SIZE 0x08000000 /* Memory window size (128M) */ ++#define HOST_IO_BASE 0xD8000000 /* ColdFire I/O window base */ ++#define PCI_IO_BASE_ADDR 0x00000000 /* PCI I/O window base */ ++#define PCI_IO_SIZE 0x00010000 /* I/O window size (64K) */ ++#define HOST_CFG_BASE 0xD8000000 /* ColdFire config window base */ ++#define HOST_DMA_BASE CONFIG_SDRAM_BASE /* ColdFire PCI-DMA window base */ ++#define PCI_HDR_BASE (MCF_MBAR+0xB00)/* ColdFire config registers */ ++ ++#define PCI_MEM_MASK (PCI_MEM_SIZE-1) ++#define PCI_IO_MASK (PCI_IO_SIZE-1) ++ ++/* Macro to set initiator window */ ++#define WxBAR(host_address, pci_address, size) \ ++ (((host_address) & 0xff000000) | \ ++ ((((size)-1) & 0xff000000) >> 8) | \ ++ ((pci_address) & 0xff000000) >> 16) ++ ++/* ++ * BIOS internal data ++ */ ++static u8 revision; /* controller revision */ ++ ++/* ++ * Board specific setting ++ */ ++const unsigned int irq_lines[] = { 5, 7 }; ++ ++#define N_SLOTS (sizeof(board_info) / sizeof(board_info[0])) ++#define N_IRQS (sizeof(irq_lines) / sizeof(irq_lines[0])) ++#define BRIDGE_SLOT 0 ++ ++const struct slotinfo { ++ unsigned char idsel; /* device number */ ++ unsigned char irq; /* external IRQ */ ++ unsigned char req; /* REQ line number */ ++ unsigned char gnt; /* GNT line number */ ++} board_info[] = { ++ {0, 0, 0, 0}, /* Bridge */ ++ {17, 5, 1, 1}, /* Slot #1 */ ++ {18, 5, 2, 2}, /* Slot #2 */ ++ {20, 7, 3, 3}, /* Slot #3 */ ++ {21, 7, 4, 4}, /* Slot #4 */ ++}; ++ ++/************************************************************************/ ++ ++/* ++ * static int mk_conf_addr() ++ * ++ * Return type0 or type1 configuration address ++ * by the means of device address and PCI dword location ++ * 0 - for not existing slots ++ */ ++static int mk_conf_addr(/*struct pci_dev *dev*/struct pci_bus *bus, unsigned int devfn, int where) ++{ ++ int slot, func, address, idsel, dev_fn; ++ ++ if (bus->number) { ++ address = MCF_PCICAR_E | (bus->number << 16) | ++ (devfn << 8) | (where & 0xfc); ++ } else { ++ slot = PCI_SLOT(devfn); ++ if (slot > N_SLOTS || slot == BRIDGE_SLOT) ++ return 0; ++ else { ++ func = PCI_FUNC(devfn); ++ idsel = board_info[slot].idsel; ++ ++ dev_fn = PCI_DEVFN(idsel, func); ++ address = MCF_PCICAR_E | (bus->number << 16) | ++ (dev_fn << 8) | (where & 0xfc); ++ } ++ } ++ ++ return (address); ++} ++ ++/* ++ * static int read_config_byte() ++ * ++ * Read a byte from configuration space of specified device ++ */ ++static int read_config_byte(/*struct pci_dev *dev*/struct pci_bus *bus, unsigned int devfn, int where, u8 *value) ++{ ++ int slot; ++ int address; ++ int result; ++ ++ *value = 0xff; ++ result = PCIBIOS_SUCCESSFUL; ++ ++ slot = PCI_SLOT(devfn); ++ if (slot == BRIDGE_SLOT) { ++ if (where <= 0x40) ++ *value = *(volatile u8 *) (PCI_HDR_BASE + (where ^ 3)); ++ else ++ *value = 0; ++ } else { ++ address = mk_conf_addr(bus, devfn, where); ++ if (!address) ++ result = PCIBIOS_DEVICE_NOT_FOUND; ++ else { ++ MCF_PCICAR = address; ++ *value = *(volatile u8 *) (HOST_CFG_BASE + (where & 3)); ++ } ++ } ++ __asm__ __volatile__("nop"); ++ __asm__ __volatile__("nop"); ++ MCF_PCICAR &= ~MCF_PCICAR_E; ++ ++ DBG("PCI: read_config_byte bus=%d, devfn=%d, addr=0x%02X, val=0x%02X, ret=%02X\n", ++ bus->number, devfn, where, *value, result); ++ ++ return (result); ++} ++ ++/* ++ * static int read_config_word() ++ * ++ * Read a word from configuration space of specified device ++ */ ++static int read_config_word(/*struct pci_dev *dev*/struct pci_bus *bus, unsigned int devfn, int where, u16 *value) ++{ ++ int slot; ++ int address; ++ int result; ++ ++ *value = 0xffff; ++ result = PCIBIOS_SUCCESSFUL; ++ ++ if (where & 0x1) ++ result = PCIBIOS_BAD_REGISTER_NUMBER; ++ else { ++ slot = PCI_SLOT(devfn); ++ if (slot == BRIDGE_SLOT) { ++ if (where <= 0x3f) ++ *value = ++ *(volatile u16 *) (PCI_HDR_BASE + ++ (where ^ 2)); ++ else ++ *value = 0; ++ } else { ++ address = mk_conf_addr(bus, devfn, where); ++ if (!address) ++ result = PCIBIOS_DEVICE_NOT_FOUND; ++ else { ++ MCF_PCICAR = address; ++ *value = le16_to_cpu(*(volatile u16 *) ++ (HOST_CFG_BASE + ++ (where & 2))); ++ } ++ } ++ } ++ __asm__ __volatile__("nop"); ++ __asm__ __volatile__("nop"); ++ MCF_PCICAR &= ~MCF_PCICAR_E; ++ ++ DBG("PCI: read_config_word bus=%d, devfn=%d, addr=0x%02X, val=0x%04X ret=%02X\n", ++ bus->number, devfn, where, *value, result); ++ ++ return (result); ++} ++ ++/* ++ * static int read_config_dword() ++ * ++ * Read a long word from configuration space of specified device ++ */ ++static int read_config_dword(/*struct pci_dev *dev*/struct pci_bus *bus, unsigned int devfn, int where, u32 *value) ++{ ++ int slot; ++ int address; ++ int result; ++ ++ *value = 0xffffffff; ++ result = PCIBIOS_SUCCESSFUL; ++ ++ if (where & 0x3) ++ result = PCIBIOS_BAD_REGISTER_NUMBER; ++ else { ++ slot = PCI_SLOT(devfn); ++ if (slot == BRIDGE_SLOT) { ++ if (where <= 0x3d) ++ *value = ++ *(volatile u32 *) (PCI_HDR_BASE + where); ++ else ++ *value = 0; ++ __asm__ __volatile__("nop"); ++ __asm__ __volatile__("nop"); ++ } else { ++ address = mk_conf_addr(bus, devfn, where); ++ if (!address) ++ result = PCIBIOS_DEVICE_NOT_FOUND; ++ else { ++ MCF_PCICAR = address; ++ *value = le32_to_cpu(*(volatile u32 *) ++ (HOST_CFG_BASE)); ++ __asm__ __volatile__("nop"); ++ __asm__ __volatile__("nop"); ++ if (bus->number != 0 && revision < 1) { ++ volatile u32 temp; ++ ++ MCF_PCICAR |= 0xff0000; ++ temp = *(volatile u32 *) (HOST_CFG_BASE); ++ } ++ } ++ } ++ } ++ ++ MCF_PCICAR &= ~MCF_PCICAR_E; ++ ++ DBG("PCI: read_config_dword bus=%d, devfn=%d, addr=0x%02X, value=0x%08X ret=%02X\n", ++ bus->number, devfn, where, *value, result); ++ ++ return (result); ++} ++ ++/* ++ * static int write_config_byte() ++ * ++ * Write a byte to configuration space of specified device ++ */ ++static int write_config_byte(/*struct pci_dev *dev*/struct pci_bus *bus, unsigned int devfn, int where, u8 value) ++{ ++ int slot; ++ int address; ++ int result; ++ ++ result = PCIBIOS_SUCCESSFUL; ++ ++ slot = PCI_SLOT(devfn); ++ if (slot == BRIDGE_SLOT) { ++ if (where <= 0x40) ++ *(volatile u8 *) (PCI_HDR_BASE + (where ^ 3)) = value; ++ } else { ++ address = mk_conf_addr(bus, devfn, where); ++ if (!address) ++ result = PCIBIOS_DEVICE_NOT_FOUND; ++ else { ++ MCF_PCICAR = address; ++ *(volatile u8 *) (HOST_CFG_BASE + (where & 3)) = value; ++ } ++ } ++ __asm__ __volatile__("nop"); ++ __asm__ __volatile__("nop"); ++ MCF_PCICAR &= ~MCF_PCICAR_E; ++ ++ DBG("PCI: write_config_byte bus=%d, devfn=%d, addr=0x%02X, value=0x%02X ret=%02X\n", ++ bus->number, devfn, where, value, result); ++ ++ return (result); ++} ++ ++/* ++ * static int write_config_word() ++ * ++ * Write a word to configuration space of specified device ++ */ ++static int write_config_word(/*struct pci_dev *dev*/struct pci_bus *bus, unsigned int devfn, int where, u16 value) ++{ ++ int slot; ++ int address; ++ int result; ++ ++ result = PCIBIOS_SUCCESSFUL; ++ ++ if (where & 0x1) ++ result = PCIBIOS_BAD_REGISTER_NUMBER; ++ else { ++ slot = PCI_SLOT(devfn); ++ if (slot == BRIDGE_SLOT) { ++ if (where <= 0x3f) ++ *(volatile u16 *) (PCI_HDR_BASE + (where ^ 2)) = ++ value; ++ } else { ++ address = mk_conf_addr(bus, devfn, where); ++ if (!address) ++ result = PCIBIOS_DEVICE_NOT_FOUND; ++ else { ++ MCF_PCICAR = address; ++ *(volatile u16 *) (HOST_CFG_BASE + (where & 2)) = ++ cpu_to_le16(value); ++ } ++ } ++ } ++ __asm__ __volatile__("nop"); ++ __asm__ __volatile__("nop"); ++ MCF_PCICAR &= ~MCF_PCICAR_E; ++ ++ DBG("PCI: write_config_word bus=%d, devfn=%d, addr=0x%02X, value=0x%04X ret=%02X\n", ++ bus->number, devfn, where, value, result); ++ ++ return (result); ++} ++ ++/* ++ * static int write_config_dword() ++ * ++ * Write a long word to configuration space of specified device ++ */ ++static int write_config_dword(/*struct pci_dev *dev*/struct pci_bus *bus, unsigned int devfn, int where, u32 value) ++{ ++ int slot; ++ int address; ++ int result; ++ ++ result = PCIBIOS_SUCCESSFUL; ++ ++ if (where & 0x3) ++ result = PCIBIOS_BAD_REGISTER_NUMBER; ++ else { ++ slot = PCI_SLOT(devfn); ++ if (slot == BRIDGE_SLOT) { ++ if (where <= 0x3d) ++ *(volatile u32 *) (PCI_HDR_BASE + where) = ++ value; ++ } else { ++ address = mk_conf_addr(bus, devfn, where); ++ if (!address) ++ result = PCIBIOS_DEVICE_NOT_FOUND; ++ else { ++ MCF_PCICAR = address; ++ *(volatile u32 *) (HOST_CFG_BASE) = ++ cpu_to_le32(value); ++ } ++ } ++ } ++ __asm__ __volatile__("nop"); ++ __asm__ __volatile__("nop"); ++ MCF_PCICAR &= ~MCF_PCICAR_E; ++ ++ DBG("PCI: write_config_dword dev=%d, fn=%d, addr=0x%02X, value=0x%08X ret=%02X\n", ++ PCI_SLOT(devfn), PCI_FUNC(devfn), where, value, result); ++ ++ return (result); ++} ++ ++static int config_read(struct pci_bus *bus, unsigned int devfn, ++ int where, int size, u32 * val) ++{ ++ switch (size) { ++ case 1: ++ return read_config_byte(bus, devfn, where, (u8 *) val); ++ case 2: ++ return read_config_word(bus, devfn, where, (u16 *) val); ++ default: ++ return read_config_dword(bus, devfn, where, val); ++ } ++} ++ ++static int config_write(struct pci_bus *bus, unsigned int devfn, ++ int where, int size, u32 val) ++{ ++ switch (size) { ++ case 1: ++ return write_config_byte(bus, devfn, where, (u8) val); ++ case 2: ++ return write_config_word(bus, devfn, where, (u16) val); ++ default: ++ return write_config_dword(bus, devfn, where, val); ++ } ++} ++ ++/* ++ * configuration routines entry points ++ */ ++static struct pci_ops bus_ops = { ++ read: config_read, ++ write: config_write ++}; ++ ++/************************************************************************/ ++ ++/* ++ * u8 pci_inb() ++ * ++ * Read a byte at specified address from I/O space ++ */ ++unsigned char pci_inb(long addr) ++{ ++ char value; ++ ++ value = *(volatile unsigned char *) (HOST_IO_BASE | (addr & PCI_IO_MASK)); ++ DBG("PCI: inb addr=0x%08X, value=0x%02X\n", addr, value); ++ ++ return (unsigned char) value; ++} ++ ++ ++/* ++ * u16 pci_inw() ++ * ++ * Read a word at specified address from I/O space ++ */ ++unsigned short pci_inw(long addr) ++{ ++ short value; ++ volatile unsigned short *ptr; ++ ++ ptr = (volatile unsigned short *) (HOST_IO_BASE | (addr & PCI_IO_MASK)); ++ value = le16_to_cpu(*ptr); ++ ++ DBG("PCI: inw addr=0x%08X, value=0x%04X\n", addr, value); ++ return (unsigned short) value; ++} ++ ++/* ++ * u16 pci_raw_inw() ++ * ++ * Read a raw word at specified address from I/O space ++ */ ++unsigned short pci_raw_inw(long addr) ++{ ++ short value; ++ volatile unsigned short *ptr; ++ ++ ptr = (volatile unsigned short *) (HOST_IO_BASE | (addr & PCI_IO_MASK)); ++ value = *ptr; ++ ++ DBG("PCI: raw_inw addr=0x%08X, value=0x%04X\n", addr, value); ++ return (unsigned short) value; ++} ++ ++/* ++ * u32 pci_inl() ++ * ++ * Read a dword at specified address from I/O space ++ */ ++unsigned long pci_inl(long addr) ++{ ++ long value; ++ volatile unsigned long *ptr; ++ ++ ptr = (volatile unsigned long *) (HOST_IO_BASE | (addr & PCI_IO_MASK)); ++ value = le32_to_cpu(*ptr); ++ ++ DBG("PCI: inl addr=0x%08X, value=0x%08X\n", addr, value); ++ return (unsigned long) value; ++} ++ ++/* ++ * u32 pci_raw_inl() ++ * ++ * Read a raw dword at specified address from I/O space ++ */ ++unsigned long pci_raw_inl(long addr) ++{ ++ long value; ++ volatile unsigned long *ptr; ++ ++ ptr = (volatile unsigned long *) (HOST_IO_BASE | (addr & PCI_IO_MASK)); ++ value = *ptr; ++ ++ DBG("PCI: raw_inl addr=0x%08X, value=0x%08X\n", addr, value); ++ return (unsigned long) value; ++} ++ ++/* ++ * void pci_outb() ++ * ++ * Write a byte value at specified address to I/O space ++ */ ++void pci_outb( unsigned char value, long addr) ++{ ++ ++ *(volatile unsigned char *) (HOST_IO_BASE | (addr & PCI_IO_MASK)) = value; ++ DBG("PCI: outb addr=0x%08X, value=0x%02X\n", addr, value); ++} ++ ++ ++/* ++ * void pci_outw() ++ * ++ * Write a word value at specified address to I/O space ++ */ ++void pci_outw(volatile unsigned short value, volatile long addr) ++{ ++ volatile unsigned short *ptr; ++ ++ ptr = (volatile unsigned short *) (HOST_IO_BASE | (addr & PCI_IO_MASK)); ++ *ptr = cpu_to_le16(value); ++ DBG("PCI: outw addr=0x%08X, value=0x%04X\n", addr, value); ++} ++ ++/* ++ * void pci_raw_outw() ++ * ++ * Write a raw word value at specified address to I/O space ++ */ ++void pci_raw_outw(volatile unsigned short value, volatile long addr) ++{ ++ volatile unsigned short *ptr; ++ ++ ptr = (volatile unsigned short *) (HOST_IO_BASE | (addr & PCI_IO_MASK)); ++ *ptr = value; ++ DBG("PCI: raw_outw addr=0x%08X, value=0x%04X\n", addr, value); ++} ++ ++/* ++ * void pci_outl() ++ * ++ * Write a long word value at specified address to I/O space ++ */ ++void pci_outl(volatile unsigned long value, volatile long addr) ++{ ++ volatile unsigned long *ptr; ++ ++ ptr = (volatile unsigned long *)(HOST_IO_BASE | (addr & PCI_IO_MASK)); ++ *ptr = cpu_to_le32(value); ++ DBG("PCI: outl addr=0x%08X, value=0x%08X\n", addr, value); ++} ++ ++/* ++ * void pci_raw_outl() ++ * ++ * Write a raw long word value at specified address to I/O space ++ */ ++void pci_raw_outl(volatile unsigned long value, volatile long addr) ++{ ++ volatile unsigned long *ptr; ++ ++ ptr = (volatile unsigned long *)(HOST_IO_BASE | (addr & PCI_IO_MASK)); ++ *ptr = value; ++ DBG("PCI: raw_outl addr=0x%08X, value=0x%08X\n", addr, value); ++} ++ ++/* ++ * void pci_insb() ++ * ++ * Read several byte values from specified I/O port ++ */ ++void pci_insb(volatile unsigned char *addr, unsigned char *buf, int len) ++{ ++ for (; len--; buf++) ++ *buf = pci_inb((unsigned long)addr); ++ DBG("PCI: pci_insb addr=0x%08X, buf=%p, len=%d\n", addr, buf, len); ++} ++ ++ ++/* ++ * void pci_insw() ++ * ++ * Read several word values from specified I/O port ++ */ ++void pci_insw(volatile unsigned short *addr, unsigned short *buf, int len) ++{ ++ for (; len--; buf++) ++ *buf = pci_inw((unsigned long)addr); ++ DBG("PCI: pci_insw addr=0x%08X, buf=%p, len=%d\n", addr, buf, len); ++} ++ ++/* ++ * void pci_insl() ++ * ++ * Read several dword values from specified I/O port ++ */ ++void pci_insl(volatile unsigned long *addr, unsigned long *buf, int len) ++{ ++ for (; len--; buf++) ++ *buf = pci_inl((unsigned long)addr); ++ DBG("PCI: pci_insl addr=0x%08X, buf=%p, len=%d\n", addr, buf, len); ++} ++ ++/* ++ * void pci_outsb() ++ * ++ * Write several byte values to specified I/O port ++ */ ++void pci_outsb(volatile unsigned char *addr, const unsigned char *buf, int len) ++{ ++ for (; len--; buf++) ++ pci_outb((unsigned long)addr, *buf); ++ DBG("PCI: pci_outsb addr=0x%08X, buf=%p, len=%d\n", addr, buf, len); ++} ++ ++/* ++ * void pci_outsw() ++ * ++ * Write several word values to specified I/O port ++ */ ++void pci_outsw(volatile unsigned short *addr, const unsigned short *buf, int len) ++{ ++ for (; len--; buf++) ++ pci_outw((unsigned long)addr, *buf); ++ DBG("PCI: pci_outsw addr=0x%08X, buf=%p, len=%d\n", addr, buf, len); ++} ++ ++/* ++ * void pci_outsl() ++ * ++ * Write several dword values to specified I/O port ++ */ ++void pci_outsl(volatile unsigned long *addr, const unsigned long *buf, int len) ++{ ++ for (; len--; buf++) ++ pci_outl((unsigned long)addr, *buf); ++ DBG("PCI: pci_outsl addr=0x%08X, buf=%p, len=%d\n", addr, buf, len); ++} ++ ++/* ++ * void pci_xlb_handler() ++ * ++ * PCI XLB interrupt handler ++ */ ++irqreturn_t xlb_interrupt(int irq, void *dev) ++{ ++ volatile int xlb_error = MCF_PCIISR; ++ ++ /* Acknowlege interrupt */ ++ MCF_PCIISR = xlb_error; ++ ++ /* Dump interrupt reason */ ++ if (xlb_error & MCF_PCIISR_RE) ++ DBG("PCI: Retry Error Received\n"); ++ ++ if (xlb_error & MCF_PCIISR_IA) ++ DBG("PCI: Initiator Abort Received\n"); ++ ++ if (xlb_error & MCF_PCIISR_TA) ++ DBG("PCI: Target Abort Received\n"); ++ ++ return IRQ_HANDLED; ++} ++ ++ ++/* ++ * void pci_arbiter_handler() ++ * ++ * PCI arbiter interrupt handler ++ */ ++irqreturn_t arb_interrupt(int irq, void *dev) ++{ ++ volatile unsigned long arb_error = MCF_PCIARB_PASR; ++ ++ /* Acknowlege interrupt */ ++ printk("%s\n",__FUNCTION__); ++ MCF_PCIARB_PASR = arb_error; ++ ++ if (arb_error & MCF_PCIARB_PASR_ITLMBK) { ++ DBG("PCI: coldfire master time-out\n"); ++ ++ /* Set infinite number of retries */ ++ MCF_PCIICR &= ~0xFF; ++ } ++ ++ if (arb_error & MCF_PCIARB_PASR_EXTMBK(0x1F)) { ++ arb_error >>= 17; ++ DBG("PCI: external master time-out (mask = 0x%X)\n", arb_error); ++ ++ /* raise arbitration priority level */ ++ MCF_PCIARB_PACR = MCF_PCIARB_PACR_EXTMPRI(arb_error); ++ } ++ ++ return IRQ_HANDLED; ++} ++ ++ ++/* ++ * void pci_eint_handler() ++ * ++ * Eport interrupt handler ++ */ ++irqreturn_t eint_handler(int irq, void *dev) ++{ ++ /* Just acknowlege interrupt and exit */ ++ MCF_EPFR = 0x1 << (irq - 64); ++ return IRQ_HANDLED; ++} ++ ++ ++/* ++ * void __init coldfire_fixup(int pci_modify) ++ * ++ * Assign IRQ numbers as used by Linux to the interrupt pins ++ * of the PCI cards. ++ */ ++static void __init coldfire_fixup(int pci_modify) ++{ ++ struct pci_dev *dev; ++ unsigned char slot, pin; ++ ++ DBG("%s\n",__FUNCTION__); ++#ifdef NL_ORIGINAL ++ pci_for_each_dev(dev) { ++#else ++ dev = NULL; ++ while ((dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { ++#endif ++ if (dev->class >> 16 != PCI_BASE_CLASS_BRIDGE) { ++ slot = PCI_SLOT(dev->devfn); ++ dev->irq = 64 + board_info[slot].irq; ++ ++ /* Check if device needs interrupt */ ++#ifdef NL_ORIGINAL ++ pcibios_read_config_byte( ++ dev->bus->number, dev->devfn, ++ PCI_INTERRUPT_PIN, &pin); ++ ++ if ( pin ) { ++ pcibios_write_config_byte( ++ dev->bus->number, dev->devfn, ++ PCI_INTERRUPT_LINE, dev->irq); ++ } ++#else ++ pci_read_config_byte(dev, ++ PCI_INTERRUPT_PIN, &pin); ++ ++ if ( pin ) { ++ pci_write_config_byte(dev, ++ PCI_INTERRUPT_LINE, dev->irq); ++ } ++#endif ++ } ++ } ++} ++ ++static void __init configure_device(struct pci_dev *dev) ++{ ++ /* TODO: This should depend from disable_pci_burst setting */ ++ DBG("%s\n",__FUNCTION__); ++#ifdef NL_ORIGINAL ++ pcibios_write_config_byte(bus, devfn, PCI_CACHE_LINE_SIZE, PCI_CACHE_LINE); ++#else ++ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, PCI_CACHE_LINE); ++#endif ++} ++ ++struct pci_bus_info *__init init_coldfire_pci(void) ++{ ++ static struct pci_bus_info bus; ++ int i; ++ int pci_mem_va; ++ static char irq_name[N_IRQS][15]; ++ ++ /* Get controller revision */ ++ revision = MCF_PCICCRIR; ++ printk("ColdFire PCI Host Bridge (Rev. %d) detected:" ++ "MEMBase %x,MEMLen %x,IOBase %x,IOLen %x\n", ++ revision, HOST_MEM_BASE, PCI_MEM_SIZE - 1, 0, PCI_IO_SIZE - 1); ++ ++ /* Setup bus info structure. */ ++ memset(&bus, 0, sizeof (struct pci_bus_info)); ++ ++ /* Request intiator memory resource */ ++ bus.mem_space.start = PCI_MEM_BASE;//HOST_MEM_BASE; ++ bus.mem_space.end = bus.mem_space.start + PCI_MEM_SIZE - 1; ++ bus.mem_space.name = "PCI Bus #0"; ++ if (request_resource(&iomem_resource, &bus.mem_space) != 0) ++ { ++ printk("Failed to request bridge iomem resource\n"); ++ return NULL; ++ } ++ ++ /* Request intiator memory resource */ ++ bus.io_space.start = 0; ++ bus.io_space.end = bus.io_space.start + PCI_IO_SIZE - 1; ++ bus.io_space.name = "PCI Bus #0"; ++ if (request_resource(&ioport_resource, &bus.io_space) != 0) ++ { ++ printk("Failed to request bridge ioport resource\n"); ++ return NULL; ++ } ++ ++ /* Must Reset!!! If bootloader has PCI enabled, it will cause ++ * problem in linux when it tries to configure/find resources ++ * for the pci devices. Both registers need to be reset. ++ */ ++ MCF_PCIGSCR = 0x1; ++ MCF_PCITCR = 0x00000000; ++ ++ /* Set up the arbiter */ ++ MCF_PCIARB_PACR = 0 /*MCF_PCIARB_PACR_PKMD*/ ++ | MCF_PCIARB_PACR_INTMPRI ++ | MCF_PCIARB_PACR_INTMINTEN ++ | MCF_PCIARB_PACR_EXTMPRI(0x1F) ++ | MCF_PCIARB_PACR_EXTMINTEN(0x1F); ++ ++ /* GNT and REQ */ ++ MCF_PAR_PCIBG = 0x3FF; ++ MCF_PAR_PCIBR = 0x3FF; ++ ++ /* Enable bus mastering, memory access and MWI */ ++ MCF_PCISCR = MCF_PCISCR_B | MCF_PCISCR_M | MCF_PCISCR_MW; ++ ++ /* Setup burst parameters */ ++ MCF_PCICR1 = MCF_PCICR1_LATTIMER(32) | ++ MCF_PCICR1_CACHELINESIZE(PCI_CACHE_LINE); ++ ++ MCF_PCICR2 = 0; ++ /*MCF_PCICR2_MINGNT(PCI_MINGNT) | ++ MCF_PCICR2_MAXLAT(PCI_MAXLAT); ++ */ ++ /* Turn on error signaling */ ++ MCF_PCIICR = MCF_PCIICR_TAE | MCF_PCIICR_IAE | PCI_RETRIES; ++ MCF_PCIGSCR |= MCF_PCIGSCR_SEE; ++ /* ++ * Configure Initiator Windows ++ * Window 0: 128M PCI Memory @ HOST_MEM_BASE, 1:1 mapping ++ * Window 1: 64K I/O Memory @ HOST_IO_BASE, 1:0 mapping ++ */ ++ MCF_PCIIW0BTAR = WxBAR(HOST_MEM_BASE, PCI_MEM_BASE, PCI_MEM_SIZE); ++ MCF_PCIIW1BTAR = WxBAR(HOST_IO_BASE, PCI_IO_BASE_ADDR, PCI_IO_SIZE); ++ ++ MCF_PCIIWCR = MCF_PCIIWCR_WINCTRL1_IO | ++ MCF_PCIIWCR_WINCTRL0_MEMRDLINE; ++ ++ /* Target PCI DMA Windows */ ++ MCF_PCIBAR1 = PCI_DMA_BASE; ++ MCF_PCITBATR1 = HOST_DMA_BASE | MCF_PCITBATR1_EN; ++ MCF_PCIBAR0 = MCF_RAMBAR0;; ++ MCF_PCITBATR0 = MCF_RAMBAR0 | MCF_PCITBATR0_EN; ++ DBG("PCI TCR %x,MCF_PCIBAR1 %x,MCF_PCITBATR1 %x." ++ "MCF_PCIBAR0 %x,MCF_PCITBATR9 %x\n", MCF_PCITCR, MCF_PCIBAR1, ++ MCF_PCITBATR1, MCF_PCIBAR0, MCF_PCITBATR0); ++ /* Enable internal PCI controller interrupts */ ++ MCF_ICR(ISC_PCI_XLB) = ILP_PCI_XLB; ++ /*request_irq(64+ISC_PCI_XLB, xlb_interrupt, ++ SA_INTERRUPT, "PCI XL Bus", (void*)-1); ++ enable_irq (64+ISC_PCI_XLB); ++ */ ++ if(request_irq(64+ISC_PCI_XLB, xlb_interrupt, ++ IRQF_DISABLED, "PCI XL Bus", (void*)-1)){ ++ printk("Cannot allocate ISC_PCI_XLB IRQ\n"); ++ return (struct pci_bus_info *)-EBUSY; ++ } ++ ++ MCF_ICR(ISC_PCI_ARB) = ILP_PCI_ARB; ++ /*request_irq(64+ISC_PCI_ARB, arb_interrupt, ++ SA_INTERRUPT, "PCI Arbiter", (void*)-1); ++ enable_irq (64+ISC_PCI_ARB); ++ */ ++ if(request_irq(64+ISC_PCI_ARB, arb_interrupt, ++ IRQF_DISABLED, "PCI Arbiter", (void*)-1)){ ++ printk("Cannot allocate ISC_PCI_ARB IRQ\n"); ++ return (struct pci_bus_info *)-EBUSY; ++ } ++ ++ /* Set slots interrupt setting */ ++ for (i = 0; i < N_IRQS; i++) ++ { ++ /* Set trailing edge for PCI interrupts */ ++ MCF_EPPAR &= ~MCF_EPPAR_EPPA(irq_lines[i], 0x3); ++ if (irq_lines[i] == 5) ++ MCF_EPPAR |= MCF_EPPAR_EPPA(irq_lines[i], MCF_EPPAR_EPPAx_FALLING); ++ else ++ MCF_EPPAR |= MCF_EPPAR_EPPA(irq_lines[i], 0/*MCF_EPPAR_EPPAx_FALLING*/); ++ /* Turn on irq line in eport */ ++ MCF_EPIER |= MCF_EPIER_EPIE(irq_lines[i]); ++ ++ /* Enable irq in gpio */ ++ if (irq_lines[i] == 5) ++ MCF_PAR_FECI2CIRQ |= 1; ++ ++ if (irq_lines[i] == 6) ++ MCF_PAR_FECI2CIRQ |= 2; ++ ++ /* Register external interrupt handlers */ ++ sprintf(irq_name[i], "PCI IRQ%d", irq_lines[i]); ++ /*request_irq(64 + irq_lines[i], eint_handler, ++ SA_SHIRQ, irq_name[i], (void*)-1); ++ enable_irq(64 + irq_lines[i]);*/ ++ if(request_irq(64 + irq_lines[i], eint_handler, ++ IRQF_SHARED, irq_name[i], (void*)-1)){ ++ printk("Cannot allocate irq_lines[%d] IRQ\n", irq_lines[i]); ++ return (struct pci_bus_info *)-EBUSY; ++ } ++ } ++ ++ /* Clear PCI Reset and wait for devices to reset */ ++ MCF_PCIGSCR &= ~MCF_PCIGSCR_PR; ++ schedule_timeout((5 * HZ) / 10); ++ /* Remap initiator windows (should be 1:1 to the physical memory) */ ++ pci_mem_va = (int) ioremap_nocache(HOST_MEM_BASE, PCI_MEM_SIZE + PCI_IO_SIZE); ++#if 1 ++ printk("%s: MEMBase_phy %x, Virt %x, len %x\n",__FUNCTION__, ++ HOST_MEM_BASE,pci_mem_va,PCI_MEM_SIZE + PCI_IO_SIZE); ++#endif ++ BUG_ON(pci_mem_va != HOST_MEM_BASE); ++ ++ /* Setup bios32 and pci bus driver callbacks */ ++ bus.m68k_pci_ops = &bus_ops; ++ bus.fixup = coldfire_fixup; ++ bus.conf_device = configure_device; ++ ++ return &bus; ++} ++ +--- /dev/null ++++ b/arch/m68k/coldfire/muldi3.S +@@ -0,0 +1,64 @@ ++/* ++ * Coldfire muldi3 assembly verion ++ */ ++ ++#include <linux/linkage.h> ++.globl __muldi3 ++ ++ENTRY(__muldi3) ++ linkw %fp,#0 ++ lea %sp@(-32),%sp ++ moveml %d2-%d7/%a2-%a3,%sp@ ++ moveal %fp@(8), %a2 ++ moveal %fp@(12), %a3 ++ moveal %fp@(16), %a0 ++ moveal %fp@(20),%a1 ++ movel %a3,%d2 ++ andil #65535,%d2 ++ movel %a3,%d3 ++ clrw %d3 ++ swap %d3 ++ movel %a1,%d0 ++ andil #65535,%d0 ++ movel %a1,%d1 ++ clrw %d1 ++ swap %d1 ++ movel %d2,%d7 ++ mulsl %d0,%d7 ++ movel %d2,%d4 ++ mulsl %d1,%d4 ++ movel %d3,%d2 ++ mulsl %d0,%d2 ++ mulsl %d1,%d3 ++ movel %d7,%d0 ++ clrw %d0 ++ swap %d0 ++ addl %d0,%d4 ++ addl %d2,%d4 ++ cmpl %d4,%d2 ++ blss 1f ++ addil #65536,%d3 ++1: ++ movel %d4,%d0 ++ clrw %d0 ++ swap %d0 ++ movel %d3,%d5 ++ addl %d0,%d5 ++ movew %d4,%d6 ++ swap %d6 ++ movew %d7,%d6 ++ movel %d5,%d0 ++ movel %d6,%d1 ++ movel %a3,%d2 ++ movel %a0,%d3 ++ mulsl %d3,%d2 ++ movel %a2,%d3 ++ movel %a1,%d4 ++ mulsl %d4,%d3 ++ addl %d3,%d2 ++ movel %d2,%d0 ++ addl %d5,%d0 ++ moveml %sp@, %d2-%d7/%a2-%a3 ++ lea %sp@(32),%sp ++ unlk %fp ++ rts +--- /dev/null ++++ b/arch/m68k/coldfire/pci.c +@@ -0,0 +1,245 @@ ++/* ++ * linux/arch/m68k/coldfire/pci.c ++ * ++ * PCI initialization for Coldfire architectures. ++ * ++ * Currently Supported: ++ * M5445x ++ * ++ * Copyright (c) 2007 Freescale Semiconductor, Inc. ++ * Kurt Mahan <kmahan@freescale.com> ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/pci.h> ++ ++#include <asm/mcfsim.h> ++#include <asm/pci.h> ++ ++/* pci ops for reading/writing config */ ++struct pci_raw_ops *raw_pci_ops; ++ ++/* pci debug flag */ ++static int debug_pci; ++ ++#ifdef CONFIG_M54455 ++extern int init_mcf5445x_pci(void); ++extern void mcf5445x_conf_device(struct pci_dev *dev); ++extern void mcf5445x_pci_dumpregs(void); ++ ++extern struct resource pci_ioport_resource; ++extern struct resource pci_iomem_resource; ++#endif ++ ++static int ++pci_read(struct pci_bus *bus, unsigned int devfn, int where, ++ int size, u32 *value) ++{ ++ return raw_pci_ops->read(0, bus->number, devfn, where, size, value); ++} ++ ++static int ++pci_write(struct pci_bus *bus, unsigned int devfn, int where, ++ int size, u32 value) ++{ ++ return raw_pci_ops->write(0, bus->number, devfn, where, size, value); ++} ++ ++struct pci_ops pci_root_ops = { ++ .read = pci_read, ++ .write = pci_write, ++}; ++ ++/* ++ * pcibios_setup(char *) ++ * ++ * Initialize the pcibios based on cmd line params. ++ */ ++char * ++pcibios_setup(char *str) ++{ ++ if (!strcmp(str, "debug")) { ++ debug_pci = 1; ++ return NULL; ++ } ++ return str; ++} ++ ++/* ++ * We need to avoid collisions with `mirrored' VGA ports ++ * and other strange ISA hardware, so we always want the ++ * addresses to be allocated in the 0x000-0x0ff region ++ * modulo 0x400. ++ * ++ * Why? Because some silly external IO cards only decode ++ * the low 10 bits of the IO address. The 0x00-0xff region ++ * is reserved for motherboard devices that decode all 16 ++ * bits, so it's ok to allocate at, say, 0x2800-0x28ff, ++ * but we want to try to avoid allocating at 0x2900-0x2bff ++ * which might have be mirrored at 0x0100-0x03ff.. ++ */ ++void ++pcibios_align_resource(void *data, struct resource *res, resource_size_t size, ++ resource_size_t align) ++{ ++ struct pci_dev *dev = data; ++ ++ if (res->flags & IORESOURCE_IO) { ++ resource_size_t start = res->start; ++ ++ if (size > 0x100) ++ printk(KERN_ERR "PCI: I/O Region %s/%d too large" ++ " (%ld bytes)\n", pci_name(dev), ++ dev->resource - res, (long int)size); ++ ++ if (start & 0x300) { ++ start = (start + 0x3ff) & ~0x3ff; ++ res->start = start; ++ } ++ } ++} ++ ++/* ++ * Swizzle the device pin each time we cross a bridge ++ * and return the slot number. ++ */ ++static u8 __devinit ++pcibios_swizzle(struct pci_dev *dev, u8 *pin) ++{ ++ return 0; ++} ++ ++/* ++ * Map a slot/pin to an IRQ. ++ */ ++static int ++pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) ++{ ++ return 0x43; ++} ++ ++/* ++ * pcibios_update_irq(struct pci_dev *dev, int irq) ++ * ++ * Update a PCI interrupt. ++ */ ++void ++pcibios_update_irq(struct pci_dev *dev, int irq) ++{ ++ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); ++} ++ ++/* ++ * pcibios_enable_device(struct pci_dev *dev, int mask) ++ * ++ * Enable a device on the PCI bus. ++ */ ++int ++pcibios_enable_device(struct pci_dev *dev, int mask) ++{ ++ u16 cmd, old_cmd; ++ int idx; ++ struct resource *r; ++ ++ pci_read_config_word(dev, PCI_COMMAND, &cmd); ++ old_cmd = cmd; ++ for (idx = 0; idx < 6; idx++) { ++ r = &dev->resource[idx]; ++ if (!r->start && r->end) { ++ printk(KERN_ERR "PCI: Device %s not available because " ++ "of resource collisions\n", pci_name(dev)); ++ return -EINVAL; ++ } ++ if (r->flags & IORESOURCE_IO) ++ cmd |= PCI_COMMAND_IO; ++ if (r->flags & IORESOURCE_MEM) ++ cmd |= PCI_COMMAND_MEMORY; ++ } ++ if (cmd != old_cmd) { ++ printk("PCI: Enabling device %s (%04x -> %04x)\n", ++ pci_name(dev), old_cmd, cmd); ++ pci_write_config_word(dev, PCI_COMMAND, cmd); ++#ifdef CONFIG_M54455 ++ mcf5445x_conf_device(dev); ++#endif ++ } ++ ++ return 0; ++} ++ ++/* ++ * pcibios_fixup_bus(struct pci_bus *bus) ++ */ ++void ++pcibios_fixup_bus(struct pci_bus *bus) ++{ ++ struct pci_dev *dev = bus->self; ++ ++ if (!dev) { ++ /* Root bus. */ ++#ifdef CONFIG_M54455 ++ bus->resource[0] = &pci_ioport_resource; ++ bus->resource[1] = &pci_iomem_resource; ++#endif ++ } ++} ++ ++/* ++ * pcibios_init(void) ++ * ++ * Allocate/initialize low level pci bus/devices. ++ */ ++static int __init ++pcibios_init(void) ++{ ++ struct pci_bus *bus; ++ ++ if (!raw_pci_ops) { ++ printk(KERN_WARNING "PCIBIOS: FATAL: NO PCI Hardware found\n"); ++ return 0; ++ } ++ ++ /* allocate and scan the (only) bus */ ++ bus = pci_scan_bus_parented(NULL, 0, &pci_root_ops, NULL); ++ ++ /* setup everything */ ++ if (bus) { ++ /* compute the bridge window sizes */ ++ pci_bus_size_bridges(bus); ++ ++ /* (re)assign device resources */ ++ pci_bus_assign_resources(bus); ++ ++ /* add the bus to the system */ ++ pci_bus_add_devices(bus); ++ ++ /* fixup irqs */ ++ pci_fixup_irqs(pcibios_swizzle, pcibios_map_irq); ++ } ++ ++ return 0; ++} ++ ++/* ++ * pci_init(void) ++ * ++ * Initialize the PCI Hardware. ++ */ ++static int __init ++pci_init(void) ++{ ++#if defined(CONFIG_M54455) ++ init_mcf5445x_pci(); ++#endif ++ if (!raw_pci_ops) ++ printk(KERN_ERR "PCI: FATAL: NO PCI Detected\n"); ++ ++ return 0; ++} ++ ++/* low level hardware (first) */ ++arch_initcall(pci_init); ++ ++/* basic bios init (second) */ ++subsys_initcall(pcibios_init); +--- /dev/null ++++ b/arch/m68k/coldfire/signal.c +@@ -0,0 +1,871 @@ ++/* ++ * linux/arch/m68k/kernel/signal.c ++ * ++ * Copyright (C) 1991, 1992 Linus Torvalds ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive ++ * for more details. ++ */ ++ ++/* ++ * Derived from m68k/kernel/signal.c and the original authors are credited ++ * there. ++ * ++ * Coldfire support by: ++ * Matt Waddel Matt.Waddel@freescale.com ++ * Copyright Freescale Semiconductor, Inc 2007 ++ */ ++ ++#include <linux/sched.h> ++#include <linux/mm.h> ++#include <linux/kernel.h> ++#include <linux/signal.h> ++#include <linux/syscalls.h> ++#include <linux/errno.h> ++#include <linux/wait.h> ++#include <linux/ptrace.h> ++#include <linux/unistd.h> ++#include <linux/stddef.h> ++#include <linux/highuid.h> ++#include <linux/personality.h> ++#include <linux/tty.h> ++#include <linux/binfmts.h> ++ ++#include <asm/setup.h> ++#include <asm/cf_uaccess.h> ++#include <asm/cf_pgtable.h> ++#include <asm/traps.h> ++#include <asm/ucontext.h> ++#include <asm/cacheflush.h> ++ ++#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) ++ ++asmlinkage int do_signal(sigset_t *oldset, struct pt_regs *regs); ++ ++const int frame_extra_sizes[16] = { ++ [1] = -1, ++ [2] = sizeof(((struct frame *)0)->un.fmt2), ++ [3] = sizeof(((struct frame *)0)->un.fmt3), ++ [4] = 0, ++ [5] = -1, ++ [6] = -1, ++ [7] = sizeof(((struct frame *)0)->un.fmt7), ++ [8] = -1, ++ [9] = sizeof(((struct frame *)0)->un.fmt9), ++ [10] = sizeof(((struct frame *)0)->un.fmta), ++ [11] = sizeof(((struct frame *)0)->un.fmtb), ++ [12] = -1, ++ [13] = -1, ++ [14] = -1, ++ [15] = -1, ++}; ++ ++/* ++ * Atomically swap in the new signal mask, and wait for a signal. ++ */ ++asmlinkage int do_sigsuspend(struct pt_regs *regs) ++{ ++ old_sigset_t mask = regs->d3; ++ sigset_t saveset; ++ ++ mask &= _BLOCKABLE; ++ spin_lock_irq(¤t->sighand->siglock); ++ saveset = current->blocked; ++ siginitset(¤t->blocked, mask); ++ recalc_sigpending(); ++ spin_unlock_irq(¤t->sighand->siglock); ++ ++ regs->d0 = -EINTR; ++ while (1) { ++ current->state = TASK_INTERRUPTIBLE; ++ schedule(); ++ if (do_signal(&saveset, regs)) ++ return -EINTR; ++ } ++} ++ ++asmlinkage int ++do_rt_sigsuspend(struct pt_regs *regs) ++{ ++ sigset_t __user *unewset = (sigset_t __user *)regs->d1; ++ size_t sigsetsize = (size_t)regs->d2; ++ sigset_t saveset, newset; ++ ++ /* XXX: Don't preclude handling different sized sigset_t's. */ ++ if (sigsetsize != sizeof(sigset_t)) ++ return -EINVAL; ++ ++ if (copy_from_user(&newset, unewset, sizeof(newset))) ++ return -EFAULT; ++ sigdelsetmask(&newset, ~_BLOCKABLE); ++ ++ spin_lock_irq(¤t->sighand->siglock); ++ saveset = current->blocked; ++ current->blocked = newset; ++ recalc_sigpending(); ++ spin_unlock_irq(¤t->sighand->siglock); ++ ++ regs->d0 = -EINTR; ++ while (1) { ++ current->state = TASK_INTERRUPTIBLE; ++ schedule(); ++ if (do_signal(&saveset, regs)) ++ return -EINTR; ++ } ++} ++ ++asmlinkage int ++sys_sigaction(int sig, const struct old_sigaction __user *act, ++ struct old_sigaction __user *oact) ++{ ++ struct k_sigaction new_ka, old_ka; ++ int ret; ++ ++ if (act) { ++ old_sigset_t mask; ++ if (!access_ok(VERIFY_READ, act, sizeof(*act)) || ++ __get_user(new_ka.sa.sa_handler, &act->sa_handler) || ++ __get_user(new_ka.sa.sa_restorer, &act->sa_restorer)) ++ return -EFAULT; ++ __get_user(new_ka.sa.sa_flags, &act->sa_flags); ++ __get_user(mask, &act->sa_mask); ++ siginitset(&new_ka.sa.sa_mask, mask); ++ } ++ ++ ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL); ++ ++ if (!ret && oact) { ++ if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) || ++ __put_user(old_ka.sa.sa_handler, &oact->sa_handler) || ++ __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer)) ++ return -EFAULT; ++ __put_user(old_ka.sa.sa_flags, &oact->sa_flags); ++ __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask); ++ } ++ ++ return ret; ++} ++ ++asmlinkage int ++sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss) ++{ ++ return do_sigaltstack(uss, uoss, rdusp()); ++} ++ ++ ++/* ++ * Do a signal return; undo the signal stack. ++ * ++ * Keep the return code on the stack quadword aligned! ++ * That makes the cache flush below easier. ++ */ ++ ++struct sigframe ++{ ++ char __user *pretcode; ++ int sig; ++ int code; ++ struct sigcontext __user *psc; ++ char retcode[16]; ++ unsigned long extramask[_NSIG_WORDS-1]; ++ struct sigcontext sc; ++}; ++ ++struct rt_sigframe ++{ ++ char __user *pretcode; ++ int sig; ++ struct siginfo __user *pinfo; ++ void __user *puc; ++ char retcode[16]; ++ struct siginfo info; ++ struct ucontext uc; ++}; ++ ++#define FPCONTEXT_SIZE 216 ++#define uc_fpstate uc_filler[0] ++#define uc_formatvec uc_filler[FPCONTEXT_SIZE/4] ++#define uc_extra uc_filler[FPCONTEXT_SIZE/4+1] ++ ++#ifdef CONFIG_FPU ++static unsigned char fpu_version; /* version num of fpu, set by setup_frame */ ++ ++static inline int restore_fpu_state(struct sigcontext *sc) ++{ ++ int err = 1; ++ ++ if (FPU_IS_EMU) { ++ /* restore registers */ ++ memcpy(current->thread.fpcntl, sc->sc_fpcntl, 12); ++ memcpy(current->thread.fp, sc->sc_fpregs, 24); ++ return 0; ++ } ++ ++ if (CPU_IS_060 ? sc->sc_fpstate[2] : sc->sc_fpstate[0]) { ++ /* Verify the frame format. */ ++ if (!CPU_IS_060 && (sc->sc_fpstate[0] != fpu_version)) ++ goto out; ++ if (CPU_IS_020_OR_030) { ++ if (m68k_fputype & FPU_68881 && ++ !(sc->sc_fpstate[1] == 0x18 || sc->sc_fpstate[1] == 0xb4)) ++ goto out; ++ if (m68k_fputype & FPU_68882 && ++ !(sc->sc_fpstate[1] == 0x38 || sc->sc_fpstate[1] == 0xd4)) ++ goto out; ++ } else if (CPU_IS_040) { ++ if (!(sc->sc_fpstate[1] == 0x00 || ++ sc->sc_fpstate[1] == 0x28 || ++ sc->sc_fpstate[1] == 0x60)) ++ goto out; ++ } else if (CPU_IS_060) { ++ if (!(sc->sc_fpstate[3] == 0x00 || ++ sc->sc_fpstate[3] == 0x60 || ++ sc->sc_fpstate[3] == 0xe0)) ++ goto out; ++ } else ++ goto out; ++ ++ } ++ err = 0; ++ ++out: ++ return err; ++} ++ ++static inline int rt_restore_fpu_state(struct ucontext __user *uc) ++{ ++ unsigned char fpstate[FPCONTEXT_SIZE]; ++ int context_size = CPU_IS_060 ? 8 : 0; ++ fpregset_t fpregs; ++ int err = 1; ++ ++ if (FPU_IS_EMU) { ++ /* restore fpu control register */ ++ if (__copy_from_user(current->thread.fpcntl, ++ uc->uc_mcontext.fpregs.f_fpcntl, 12)) ++ goto out; ++ /* restore all other fpu register */ ++ if (__copy_from_user(current->thread.fp, ++ uc->uc_mcontext.fpregs.f_fpregs, 96)) ++ goto out; ++ return 0; ++ } ++ ++ if (__get_user(*(long *)fpstate, (long __user *)&uc->uc_fpstate)) ++ goto out; ++ if (CPU_IS_060 ? fpstate[2] : fpstate[0]) { ++ if (!CPU_IS_060) ++ context_size = fpstate[1]; ++ /* Verify the frame format. */ ++ if (!CPU_IS_060 && (fpstate[0] != fpu_version)) ++ goto out; ++ if (CPU_IS_020_OR_030) { ++ if (m68k_fputype & FPU_68881 && ++ !(context_size == 0x18 || context_size == 0xb4)) ++ goto out; ++ if (m68k_fputype & FPU_68882 && ++ !(context_size == 0x38 || context_size == 0xd4)) ++ goto out; ++ } else if (CPU_IS_040) { ++ if (!(context_size == 0x00 || ++ context_size == 0x28 || ++ context_size == 0x60)) ++ goto out; ++ } else if (CPU_IS_060) { ++ if (!(fpstate[3] == 0x00 || ++ fpstate[3] == 0x60 || ++ fpstate[3] == 0xe0)) ++ goto out; ++ } else ++ goto out; ++ if (__copy_from_user(&fpregs, &uc->uc_mcontext.fpregs, ++ sizeof(fpregs))) ++ goto out; ++ } ++ if (context_size && ++ __copy_from_user(fpstate + 4, (long __user *)&uc->uc_fpstate + 1, ++ context_size)) ++ goto out; ++ err = 0; ++ ++out: ++ return err; ++} ++#endif ++ ++static inline int ++restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *usc, ++ void __user *fp, int *pd0) ++{ ++ int fsize, formatvec; ++ struct sigcontext context; ++ int err = 0; ++ ++ /* get previous context */ ++ if (copy_from_user(&context, usc, sizeof(context))) ++ goto badframe; ++ ++ /* restore passed registers */ ++ regs->d1 = context.sc_d1; ++ regs->a0 = context.sc_a0; ++ regs->a1 = context.sc_a1; ++ regs->sr = (regs->sr & 0xff00) | (context.sc_sr & 0xff); ++ regs->pc = context.sc_pc; ++ regs->orig_d0 = -1; /* disable syscall checks */ ++ wrusp(context.sc_usp); ++ formatvec = context.sc_formatvec; ++ regs->format = formatvec >> 12; ++ regs->vector = formatvec & 0xfff; ++ ++#ifdef CONFIG_FPU ++ err = restore_fpu_state(&context); ++#endif ++ ++ fsize = frame_extra_sizes[regs->format]; ++ if (fsize < 0) { ++ /* ++ * user process trying to return with weird frame format ++ */ ++#ifdef DEBUG ++ printk(KERN_DEBUG "user process returning with weird \ ++ frame format\n"); ++#endif ++ goto badframe; ++ } ++ ++ /* OK. Make room on the supervisor stack for the extra junk, ++ * if necessary. ++ */ ++ ++ { ++ struct switch_stack *sw = (struct switch_stack *)regs - 1; ++ regs->d0 = context.sc_d0; ++#define frame_offset (sizeof(struct pt_regs)+sizeof(struct switch_stack)) ++ __asm__ __volatile__ ++ (" movel %0,%/sp\n\t" ++ " bra ret_from_signal\n" ++ "4:\n" ++ ".section __ex_table,\"a\"\n" ++ " .align 4\n" ++ " .long 2b,4b\n" ++ ".previous" ++ : /* no outputs, it doesn't ever return */ ++ : "a" (sw), "d" (fsize), "d" (frame_offset/4-1), ++ "n" (frame_offset), "a" (fp) ++ : "a0"); ++#undef frame_offset ++ /* ++ * If we ever get here an exception occurred while ++ * building the above stack-frame. ++ */ ++ goto badframe; ++ } ++ ++ *pd0 = context.sc_d0; ++ return err; ++ ++badframe: ++ return 1; ++} ++ ++static inline int ++rt_restore_ucontext(struct pt_regs *regs, struct switch_stack *sw, ++ struct ucontext __user *uc, int *pd0) ++{ ++ int fsize, temp; ++ greg_t __user *gregs = uc->uc_mcontext.gregs; ++ unsigned long usp; ++ int err; ++ ++ err = __get_user(temp, &uc->uc_mcontext.version); ++ if (temp != MCONTEXT_VERSION) ++ goto badframe; ++ /* restore passed registers */ ++ err |= __get_user(regs->d0, &gregs[0]); ++ err |= __get_user(regs->d1, &gregs[1]); ++ err |= __get_user(regs->d2, &gregs[2]); ++ err |= __get_user(regs->d3, &gregs[3]); ++ err |= __get_user(regs->d4, &gregs[4]); ++ err |= __get_user(regs->d5, &gregs[5]); ++ err |= __get_user(sw->d6, &gregs[6]); ++ err |= __get_user(sw->d7, &gregs[7]); ++ err |= __get_user(regs->a0, &gregs[8]); ++ err |= __get_user(regs->a1, &gregs[9]); ++ err |= __get_user(regs->a2, &gregs[10]); ++ err |= __get_user(sw->a3, &gregs[11]); ++ err |= __get_user(sw->a4, &gregs[12]); ++ err |= __get_user(sw->a5, &gregs[13]); ++ err |= __get_user(sw->a6, &gregs[14]); ++ err |= __get_user(usp, &gregs[15]); ++ wrusp(usp); ++ err |= __get_user(regs->pc, &gregs[16]); ++ err |= __get_user(temp, &gregs[17]); ++ regs->sr = (regs->sr & 0xff00) | (temp & 0xff); ++ regs->orig_d0 = -1; /* disable syscall checks */ ++ err |= __get_user(temp, &uc->uc_formatvec); ++ regs->format = temp >> 12; ++ regs->vector = temp & 0xfff; ++ ++#ifdef CONFIG_FPU ++ err |= rt_restore_fpu_state(uc); ++#endif ++ ++ if (do_sigaltstack(&uc->uc_stack, NULL, usp) == -EFAULT) ++ goto badframe; ++ ++ fsize = frame_extra_sizes[regs->format]; ++ if (fsize < 0) { ++ /* ++ * user process trying to return with weird frame format ++ */ ++#ifdef DEBUG ++ printk(KERN_DEBUG "user process returning with weird \ ++ frame format\n"); ++#endif ++ goto badframe; ++ } ++ ++ /* OK. Make room on the supervisor stack for the extra junk, ++ * if necessary. ++ */ ++ ++ { ++#define frame_offset (sizeof(struct pt_regs)+sizeof(struct switch_stack)) ++ __asm__ __volatile__ ++ (" movel %0,%/sp\n\t" ++ " bra ret_from_signal\n" ++ "4:\n" ++ ".section __ex_table,\"a\"\n" ++ " .align 4\n" ++ " .long 2b,4b\n" ++ ".previous" ++ : /* no outputs, it doesn't ever return */ ++ : "a" (sw), "d" (fsize), "d" (frame_offset/4-1), ++ "n" (frame_offset), "a" (&uc->uc_extra) ++ : "a0"); ++#undef frame_offset ++ /* ++ * If we ever get here an exception occurred while ++ * building the above stack-frame. ++ */ ++ goto badframe; ++ } ++ ++ *pd0 = regs->d0; ++ return err; ++ ++badframe: ++ return 1; ++} ++ ++asmlinkage int do_sigreturn(unsigned long __unused) ++{ ++ struct switch_stack *sw = (struct switch_stack *) &__unused; ++ struct pt_regs *regs = (struct pt_regs *) (sw + 1); ++ unsigned long usp = rdusp(); ++ struct sigframe __user *frame = (struct sigframe __user *)(usp - 4); ++ sigset_t set; ++ int d0; ++ ++ if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) ++ goto badframe; ++ if (__get_user(set.sig[0], &frame->sc.sc_mask) || ++ (_NSIG_WORDS > 1 && ++ __copy_from_user(&set.sig[1], &frame->extramask, ++ sizeof(frame->extramask)))) ++ goto badframe; ++ ++ sigdelsetmask(&set, ~_BLOCKABLE); ++ spin_lock_irq(¤t->sighand->siglock); ++ current->blocked = set; ++ recalc_sigpending(); ++ spin_unlock_irq(¤t->sighand->siglock); ++ ++ if (restore_sigcontext(regs, &frame->sc, frame + 1, &d0)) ++ goto badframe; ++ return d0; ++ ++badframe: ++ force_sig(SIGSEGV, current); ++ return 0; ++} ++ ++asmlinkage int do_rt_sigreturn(unsigned long __unused) ++{ ++ struct switch_stack *sw = (struct switch_stack *) &__unused; ++ struct pt_regs *regs = (struct pt_regs *) (sw + 1); ++ unsigned long usp = rdusp(); ++ struct rt_sigframe __user *frame = ++ (struct rt_sigframe __user *)(usp - 4); ++ sigset_t set; ++ int d0; ++ ++ if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) ++ goto badframe; ++ if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) ++ goto badframe; ++ ++ sigdelsetmask(&set, ~_BLOCKABLE); ++ spin_lock_irq(¤t->sighand->siglock); ++ current->blocked = set; ++ recalc_sigpending(); ++ spin_unlock_irq(¤t->sighand->siglock); ++ ++ if (rt_restore_ucontext(regs, sw, &frame->uc, &d0)) ++ goto badframe; ++ return d0; ++ ++badframe: ++ force_sig(SIGSEGV, current); ++ return 0; ++} ++ ++#ifdef CONFIG_FPU ++/* ++ * Set up a signal frame. ++ */ ++ ++static inline void save_fpu_state(struct sigcontext *sc, struct pt_regs *regs) ++{ ++ if (FPU_IS_EMU) { ++ /* save registers */ ++ memcpy(sc->sc_fpcntl, current->thread.fpcntl, 12); ++ memcpy(sc->sc_fpregs, current->thread.fp, 24); ++ return; ++ } ++} ++ ++static inline int rt_save_fpu_state(struct ucontext __user *uc, ++ struct pt_regs *regs) ++{ ++ int err = 0; ++ ++ if (FPU_IS_EMU) { ++ /* save fpu control register */ ++ err |= copy_to_user(uc->uc_mcontext.fpregs.f_fpcntl, ++ current->thread.fpcntl, 12); ++ /* save all other fpu register */ ++ err |= copy_to_user(uc->uc_mcontext.fpregs.f_fpregs, ++ current->thread.fp, 96); ++ return err; ++ } ++ ++ return err; ++} ++#endif ++ ++static void setup_sigcontext(struct sigcontext *sc, struct pt_regs *regs, ++ unsigned long mask) ++{ ++ sc->sc_mask = mask; ++ sc->sc_usp = rdusp(); ++ sc->sc_d0 = regs->d0; ++ sc->sc_d1 = regs->d1; ++ sc->sc_a0 = regs->a0; ++ sc->sc_a1 = regs->a1; ++ sc->sc_sr = regs->sr; ++ sc->sc_pc = regs->pc; ++ sc->sc_formatvec = regs->format << 12 | regs->vector; ++#ifdef CONFIG_FPU ++ save_fpu_state(sc, regs); ++#endif ++} ++ ++static inline int rt_setup_ucontext(struct ucontext __user *uc, ++ struct pt_regs *regs) ++{ ++ struct switch_stack *sw = (struct switch_stack *)regs - 1; ++ greg_t __user *gregs = uc->uc_mcontext.gregs; ++ int err = 0; ++ ++ err |= __put_user(MCONTEXT_VERSION, &uc->uc_mcontext.version); ++ err |= __put_user(regs->d0, &gregs[0]); ++ err |= __put_user(regs->d1, &gregs[1]); ++ err |= __put_user(regs->d2, &gregs[2]); ++ err |= __put_user(regs->d3, &gregs[3]); ++ err |= __put_user(regs->d4, &gregs[4]); ++ err |= __put_user(regs->d5, &gregs[5]); ++ err |= __put_user(sw->d6, &gregs[6]); ++ err |= __put_user(sw->d7, &gregs[7]); ++ err |= __put_user(regs->a0, &gregs[8]); ++ err |= __put_user(regs->a1, &gregs[9]); ++ err |= __put_user(regs->a2, &gregs[10]); ++ err |= __put_user(sw->a3, &gregs[11]); ++ err |= __put_user(sw->a4, &gregs[12]); ++ err |= __put_user(sw->a5, &gregs[13]); ++ err |= __put_user(sw->a6, &gregs[14]); ++ err |= __put_user(rdusp(), &gregs[15]); ++ err |= __put_user(regs->pc, &gregs[16]); ++ err |= __put_user(regs->sr, &gregs[17]); ++ err |= __put_user((regs->format << 12) | regs->vector, ++ &uc->uc_formatvec); ++#ifdef CONFIG_FPU ++ err |= rt_save_fpu_state(uc, regs); ++#endif ++ return err; ++} ++ ++static inline void push_cache(unsigned long vaddr) ++{ ++#if 0 ++// JKM -- need to add into the old cpushl cache stuff ++ cf_cache_push(__pa(vaddr), 8); ++#endif ++} ++ ++static inline void __user * ++get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size) ++{ ++ unsigned long usp; ++ ++ /* Default to using normal stack. */ ++ usp = rdusp(); ++ ++ /* This is the X/Open sanctioned signal stack switching. */ ++ if (ka->sa.sa_flags & SA_ONSTACK) { ++ if (!sas_ss_flags(usp)) ++ usp = current->sas_ss_sp + current->sas_ss_size; ++ } ++ return (void __user *)((usp - frame_size) & -8UL); ++} ++ ++static void setup_frame(int sig, struct k_sigaction *ka, ++ sigset_t *set, struct pt_regs *regs) ++{ ++ struct sigframe __user *frame; ++ int fsize = frame_extra_sizes[regs->format]; ++ struct sigcontext context; ++ int err = 0; ++ ++ if (fsize < 0) { ++#ifdef DEBUG ++ printk(KERN_DEBUG "setup_frame: Unknown frame format %#x\n", ++ regs->format); ++#endif ++ goto give_sigsegv; ++ } ++ ++ frame = get_sigframe(ka, regs, sizeof(*frame)); ++ ++ err |= __put_user((current_thread_info()->exec_domain ++ && current_thread_info()->exec_domain->signal_invmap ++ && sig < 32 ++ ? current_thread_info()->exec_domain->signal_invmap[sig] ++ : sig), ++ &frame->sig); ++ ++ err |= __put_user(regs->vector, &frame->code); ++ err |= __put_user(&frame->sc, &frame->psc); ++ ++ if (_NSIG_WORDS > 1) ++ err |= copy_to_user(frame->extramask, &set->sig[1], ++ sizeof(frame->extramask)); ++ ++ setup_sigcontext(&context, regs, set->sig[0]); ++ err |= copy_to_user(&frame->sc, &context, sizeof(context)); ++ ++ /* Set up to return from userspace. */ ++ err |= __put_user(frame->retcode, &frame->pretcode); ++ /* moveq #,d0; trap #0 */ ++ err |= __put_user(0x70004e40 + (__NR_sigreturn << 16), ++ (long __user *)(frame->retcode)); ++ ++ if (err) ++ goto give_sigsegv; ++ ++ push_cache((unsigned long) &frame->retcode); ++ ++ /* Set up registers for signal handler */ ++ wrusp((unsigned long) frame); ++ regs->pc = (unsigned long) ka->sa.sa_handler; ++ ++adjust_stack: ++ /* Prepare to skip over the extra stuff in the exception frame. */ ++ if (regs->stkadj) { ++ struct pt_regs *tregs = ++ (struct pt_regs *)((ulong)regs + regs->stkadj); ++#ifdef DEBUG ++ printk(KERN_DEBUG "Performing stackadjust=%04x\n", ++ regs->stkadj); ++#endif ++ /* This must be copied with decreasing addresses to ++ handle overlaps. */ ++ tregs->vector = 0; ++ tregs->format = 0; ++ tregs->pc = regs->pc; ++ tregs->sr = regs->sr; ++ } ++ return; ++ ++give_sigsegv: ++ force_sigsegv(sig, current); ++ goto adjust_stack; ++} ++ ++static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, ++ sigset_t *set, struct pt_regs *regs) ++{ ++ struct rt_sigframe __user *frame; ++ int fsize = frame_extra_sizes[regs->format]; ++ int err = 0; ++ ++ if (fsize < 0) { ++#ifdef DEBUG ++ printk(KERN_DEBUG "setup_frame: Unknown frame format %#x\n", ++ regs->format); ++#endif ++ goto give_sigsegv; ++ } ++ ++ frame = get_sigframe(ka, regs, sizeof(*frame)); ++ ++ if (fsize) { ++ err |= copy_to_user(&frame->uc.uc_extra, regs + 1, fsize); ++ regs->stkadj = fsize; ++ } ++ ++ err |= __put_user((current_thread_info()->exec_domain ++ && current_thread_info()->exec_domain->signal_invmap ++ && sig < 32 ++ ? current_thread_info()->exec_domain->signal_invmap[sig] ++ : sig), ++ &frame->sig); ++ err |= __put_user(&frame->info, &frame->pinfo); ++ err |= __put_user(&frame->uc, &frame->puc); ++ err |= copy_siginfo_to_user(&frame->info, info); ++ ++ /* Create the ucontext. */ ++ err |= __put_user(0, &frame->uc.uc_flags); ++ err |= __put_user(NULL, &frame->uc.uc_link); ++ err |= __put_user((void __user *)current->sas_ss_sp, ++ &frame->uc.uc_stack.ss_sp); ++ err |= __put_user(sas_ss_flags(rdusp()), ++ &frame->uc.uc_stack.ss_flags); ++ err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size); ++ err |= rt_setup_ucontext(&frame->uc, regs); ++ err |= copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); ++ ++ /* Set up to return from userspace. */ ++ err |= __put_user(frame->retcode, &frame->pretcode); ++ ++ /* moveq #,d0; andi.l #,D0; trap #0 */ ++ err |= __put_user(0x70AD0280, (long *)(frame->retcode + 0)); ++ err |= __put_user(0x000000ff, (long *)(frame->retcode + 4)); ++ err |= __put_user(0x4e400000, (long *)(frame->retcode + 8)); ++ ++ if (err) ++ goto give_sigsegv; ++ ++ push_cache((unsigned long) &frame->retcode); ++ ++ /* Set up registers for signal handler */ ++ wrusp((unsigned long) frame); ++ regs->pc = (unsigned long) ka->sa.sa_handler; ++ ++adjust_stack: ++ /* Prepare to skip over the extra stuff in the exception frame. */ ++ if (regs->stkadj) { ++ struct pt_regs *tregs = ++ (struct pt_regs *)((ulong)regs + regs->stkadj); ++#ifdef DEBUG ++ printk(KERN_DEBUG "Performing stackadjust=%04x\n", ++ regs->stkadj); ++#endif ++ /* This must be copied with decreasing addresses to ++ handle overlaps. */ ++ tregs->vector = 0; ++ tregs->format = 0; ++ tregs->pc = regs->pc; ++ tregs->sr = regs->sr; ++ } ++ return; ++ ++give_sigsegv: ++ force_sigsegv(sig, current); ++ goto adjust_stack; ++} ++ ++static inline void ++handle_restart(struct pt_regs *regs, struct k_sigaction *ka, int has_handler) ++{ ++ switch (regs->d0) { ++ case -ERESTARTNOHAND: ++ if (!has_handler) ++ goto do_restart; ++ regs->d0 = -EINTR; ++ break; ++ ++ case -ERESTARTSYS: ++ if (has_handler && !(ka->sa.sa_flags & SA_RESTART)) { ++ regs->d0 = -EINTR; ++ break; ++ } ++ /* fallthrough */ ++ case -ERESTARTNOINTR: ++do_restart: ++ regs->d0 = regs->orig_d0; ++ regs->pc -= 2; ++ break; ++ } ++} ++ ++/* ++ * OK, we're invoking a handler ++ */ ++static void ++handle_signal(int sig, struct k_sigaction *ka, siginfo_t *info, ++ sigset_t *oldset, struct pt_regs *regs) ++{ ++ /* are we from a system call? */ ++ if (regs->orig_d0 >= 0) ++ /* If so, check system call restarting.. */ ++ handle_restart(regs, ka, 1); ++ ++ /* set up the stack frame */ ++ if (ka->sa.sa_flags & SA_SIGINFO) ++ setup_rt_frame(sig, ka, info, oldset, regs); ++ else ++ setup_frame(sig, ka, oldset, regs); ++ ++ if (ka->sa.sa_flags & SA_ONESHOT) ++ ka->sa.sa_handler = SIG_DFL; ++ ++ spin_lock_irq(¤t->sighand->siglock); ++ sigorsets(¤t->blocked, ¤t->blocked, &ka->sa.sa_mask); ++ if (!(ka->sa.sa_flags & SA_NODEFER)) ++ sigaddset(¤t->blocked, sig); ++ recalc_sigpending(); ++ spin_unlock_irq(¤t->sighand->siglock); ++} ++ ++/* ++ * Note that 'init' is a special process: it doesn't get signals it doesn't ++ * want to handle. Thus you cannot kill init even with a SIGKILL even by ++ * mistake. ++ */ ++asmlinkage int do_signal(sigset_t *oldset, struct pt_regs *regs) ++{ ++ siginfo_t info; ++ struct k_sigaction ka; ++ int signr; ++ ++ current->thread.esp0 = (unsigned long) regs; ++ ++ if (!oldset) ++ oldset = ¤t->blocked; ++ ++ signr = get_signal_to_deliver(&info, &ka, regs, NULL); ++ if (signr > 0) { ++ /* Whee! Actually deliver the signal. */ ++ handle_signal(signr, &ka, &info, oldset, regs); ++ return 1; ++ } ++ ++ /* Did we come from a system call? */ ++ if (regs->orig_d0 >= 0) ++ /* Restart the system call - no handlers present */ ++ handle_restart(regs, NULL, 0); ++ ++ return 0; ++} +--- /dev/null ++++ b/arch/m68k/coldfire/traps.c +@@ -0,0 +1,455 @@ ++/* ++ * linux/arch/m68knommu/kernel/traps.c ++ * ++ * Copyright (C) 1993, 1994 by Hamish Macdonald ++ * ++ * 68040 fixes by Michael Rausch ++ * 68040 fixes by Martin Apel ++ * 68060 fixes by Roman Hodek ++ * 68060 fixes by Jesper Skov ++ * Coldfire fixes by Kurt Mahan ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive ++ * for more details. ++ */ ++ ++/* ++ * Sets up all exception vectors ++ */ ++#include <linux/sched.h> ++#include <linux/signal.h> ++#include <linux/kernel.h> ++#include <linux/mm.h> ++#include <linux/module.h> ++#include <linux/types.h> ++#include <linux/a.out.h> ++#include <linux/user.h> ++#include <linux/string.h> ++#include <linux/linkage.h> ++#include <linux/init.h> ++#include <linux/ptrace.h> ++#include <linux/kallsyms.h> ++ ++#include <asm/setup.h> ++#include <asm/fpu.h> ++#include <asm/system.h> ++#include <asm/uaccess.h> ++#include <asm/traps.h> ++#include <asm/pgtable.h> ++#include <asm/machdep.h> ++#include <asm/siginfo.h> ++ ++static char const * const vec_names[] = { ++ "RESET SP", "RESET PC", "BUS ERROR", "ADDRESS ERROR", ++ "ILLEGAL INSTRUCTION", "ZERO DIVIDE", "CHK", "TRAPcc", ++ "PRIVILEGE VIOLATION", "TRACE", "LINE 1010", "LINE 1111", ++ "UNASSIGNED RESERVED 12", "COPROCESSOR PROTOCOL VIOLATION", ++ "FORMAT ERROR", "UNINITIALIZED INTERRUPT", ++ "UNASSIGNED RESERVED 16", "UNASSIGNED RESERVED 17", ++ "UNASSIGNED RESERVED 18", "UNASSIGNED RESERVED 19", ++ "UNASSIGNED RESERVED 20", "UNASSIGNED RESERVED 21", ++ "UNASSIGNED RESERVED 22", "UNASSIGNED RESERVED 23", ++ "SPURIOUS INTERRUPT", "LEVEL 1 INT", "LEVEL 2 INT", "LEVEL 3 INT", ++ "LEVEL 4 INT", "LEVEL 5 INT", "LEVEL 6 INT", "LEVEL 7 INT", ++ "SYSCALL", "TRAP #1", "TRAP #2", "TRAP #3", ++ "TRAP #4", "TRAP #5", "TRAP #6", "TRAP #7", ++ "TRAP #8", "TRAP #9", "TRAP #10", "TRAP #11", ++ "TRAP #12", "TRAP #13", "TRAP #14", "TRAP #15", ++ "FPCP BSUN", "FPCP INEXACT", "FPCP DIV BY 0", "FPCP UNDERFLOW", ++ "FPCP OPERAND ERROR", "FPCP OVERFLOW", "FPCP SNAN", ++ "FPCP UNSUPPORTED OPERATION", ++ "MMU CONFIGURATION ERROR" ++}; ++ ++asmlinkage int do_page_fault(struct pt_regs *regs, unsigned long address, ++ unsigned long error_code); ++asmlinkage void trap_c(struct frame *fp); ++extern void __init coldfire_trap_init(void); ++ ++void __init trap_init(void) ++{ ++ coldfire_trap_init(); ++} ++ ++/* The following table converts the FS encoding of a ColdFire ++ exception stack frame into the error_code value needed by ++ do_fault. */ ++ ++static const unsigned char fs_err_code[] = { ++ 0, /* 0000 */ ++ 0, /* 0001 */ ++ 0, /* 0010 */ ++ 0, /* 0011 */ ++ 1, /* 0100 */ ++ 0, /* 0101 */ ++ 0, /* 0110 */ ++ 0, /* 0111 */ ++ 2, /* 1000 */ ++ 3, /* 1001 */ ++ 2, /* 1010 */ ++ 0, /* 1011 */ ++ 1, /* 1100 */ ++ 1, /* 1101 */ ++ 0, /* 1110 */ ++ 0 /* 1111 */ ++}; ++ ++#ifdef DEBUG ++static const char *fs_err_msg[16] = { ++ "Normal", ++ "Reserved", ++ "Interrupt during debug service routine", ++ "Reserved", ++ "X Protection", ++ "TLB X miss (opword)", ++ "TLB X miss (ext. word)", ++ "IFP in emulator mode", ++ "W Protection", ++ "Write error", ++ "TLB W miss", ++ "Reserved", ++ "R Protection", ++ "R/RMW Protection", ++ "TLB R miss", ++ "OEP in emulator mode", ++}; ++#endif ++ ++static inline void access_errorCF(struct frame *fp) ++{ ++ unsigned long int mmusr, complainingAddress; ++ unsigned int err_code, fs; ++ int need_page_fault; ++ ++ mmusr = fp->ptregs.mmusr; ++ complainingAddress = fp->ptregs.mmuar; ++#ifdef DEBUG ++ printk(KERN_DEBUG "pc %#lx, mmusr %#lx, complainingAddress %#lx\n", \ ++ fp->ptregs.pc, mmusr, complainingAddress); ++#endif ++ ++ /* ++ * error_code: ++ * bit 0 == 0 means no page found, 1 means protection fault ++ * bit 1 == 0 means read, 1 means write ++ */ ++ ++ fs = (fp->ptregs.fs2 << 2) | fp->ptregs.fs1; ++ switch (fs) { ++ case 5: /* 0101 TLB opword X miss */ ++ need_page_fault = cf_tlb_miss(&fp->ptregs, 0, 0, 0); ++ complainingAddress = fp->ptregs.pc; ++ break; ++ case 6: /* 0110 TLB extension word X miss */ ++ need_page_fault = cf_tlb_miss(&fp->ptregs, 0, 0, 1); ++ complainingAddress = fp->ptregs.pc + sizeof(long); ++ break; ++ case 10: /* 1010 TLB W miss */ ++ need_page_fault = cf_tlb_miss(&fp->ptregs, 1, 1, 0); ++ break; ++ case 14: /* 1110 TLB R miss */ ++ need_page_fault = cf_tlb_miss(&fp->ptregs, 0, 1, 0); ++ break; ++ default: ++ /* 0000 Normal */ ++ /* 0001 Reserved */ ++ /* 0010 Interrupt during debug service routine */ ++ /* 0011 Reserved */ ++ /* 0100 X Protection */ ++ /* 0111 IFP in emulator mode */ ++ /* 1000 W Protection*/ ++ /* 1001 Write error*/ ++ /* 1011 Reserved*/ ++ /* 1100 R Protection*/ ++ /* 1101 R Protection*/ ++ /* 1111 OEP in emulator mode*/ ++ need_page_fault = 1; ++ break; ++ } ++ ++ if (need_page_fault) { ++ err_code = fs_err_code[fs]; ++ if ((fs == 13) && (mmusr & MMUSR_WF)) /* rd-mod-wr access */ ++ err_code |= 2; /* bit1 - write, bit0 - protection */ ++ do_page_fault(&fp->ptregs, complainingAddress, err_code); ++ } ++} ++ ++void die_if_kernel(char *str, struct pt_regs *fp, int nr) ++{ ++ if (!(fp->sr & PS_S)) ++ return; ++ ++ console_verbose(); ++ printk(KERN_EMERG "%s: %08x\n", str, nr); ++ printk(KERN_EMERG "PC: [<%08lx>]", fp->pc); ++ print_symbol(" %s", fp->pc); ++ printk(KERN_EMERG "\nSR: %04x SP: %p a2: %08lx\n", ++ fp->sr, fp, fp->a2); ++ printk(KERN_EMERG "d0: %08lx d1: %08lx d2: %08lx d3: %08lx\n", ++ fp->d0, fp->d1, fp->d2, fp->d3); ++ printk(KERN_EMERG "d4: %08lx d5: %08lx a0: %08lx a1: %08lx\n", ++ fp->d4, fp->d5, fp->a0, fp->a1); ++ ++ printk(KERN_EMERG "Process %s (pid: %d, stackpage=%08lx)\n", ++ current->comm, current->pid, PAGE_SIZE+(unsigned long)current); ++ show_stack(NULL, (unsigned long *)fp); ++ do_exit(SIGSEGV); ++} ++ ++asmlinkage void buserr_c(struct frame *fp) ++{ ++ unsigned int fs; ++ ++ /* Only set esp0 if coming from user mode */ ++ if (user_mode(&fp->ptregs)) ++ current->thread.esp0 = (unsigned long) fp; ++ ++ fs = (fp->ptregs.fs2 << 2) | fp->ptregs.fs1; ++#if defined(DEBUG) ++ printk(KERN_DEBUG "*** Bus Error *** (%x)%s\n", fs, ++ fs_err_msg[fs & 0xf]); ++#endif ++ switch (fs) { ++ case 0x5: ++ case 0x6: ++ case 0x7: ++ case 0x9: ++ case 0xa: ++ case 0xd: ++ case 0xe: ++ case 0xf: ++ access_errorCF(fp); ++ break; ++ default: ++ die_if_kernel("bad frame format", &fp->ptregs, 0); ++#if defined(DEBUG) ++ printk(KERN_DEBUG "Unknown SIGSEGV - 4\n"); ++#endif ++ force_sig(SIGSEGV, current); ++ } ++} ++ ++ ++int kstack_depth_to_print = 48; ++ ++void show_stack(struct task_struct *task, unsigned long *stack) ++{ ++ unsigned long *endstack, addr, symaddr; ++ extern char _start, _etext; ++ int i; ++ ++ if (!stack) { ++ if (task) ++ stack = (unsigned long *)task->thread.ksp; ++ else ++ stack = (unsigned long *)&stack; ++ } ++ ++ addr = (unsigned long) stack; ++ endstack = (unsigned long *) PAGE_ALIGN(addr); ++ ++ printk(KERN_EMERG "Stack from %08lx:", (unsigned long)stack); ++ for (i = 0; i < kstack_depth_to_print; i++) { ++ if (stack + 1 > endstack) ++ break; ++ if (i % 8 == 0) ++ printk("\n" KERN_EMERG " "); ++ symaddr = *stack; ++ printk(KERN_EMERG " %08lx", *stack++); ++ if ((symaddr >= 0xc0000000) && (symaddr < 0xc1000000)) ++ print_symbol("(%s)", symaddr); ++ } ++ printk("\n"); ++ ++ printk(KERN_EMERG "Call Trace:"); ++ i = 0; ++ while (stack + 1 <= endstack) { ++ addr = *stack++; ++ /* ++ * If the address is either in the text segment of the ++ * kernel, or in the region which contains vmalloc'ed ++ * memory, it *may* be the address of a calling ++ * routine; if so, print it so that someone tracing ++ * down the cause of the crash will be able to figure ++ * out the call path that was taken. ++ */ ++ if (((addr >= (unsigned long) &_start) && ++ (addr <= (unsigned long) &_etext))) { ++ if (i % 4 == 0) ++ printk("\n" KERN_EMERG " "); ++ printk(KERN_EMERG " [<%08lx>]", addr); ++ i++; ++ } ++ } ++ printk("\n"); ++} ++ ++void bad_super_trap(struct frame *fp) ++{ ++ console_verbose(); ++ if (fp->ptregs.vector < sizeof(vec_names)/sizeof(vec_names[0])) ++ printk(KERN_WARNING "*** %s *** FORMAT=%X\n", ++ vec_names[fp->ptregs.vector], ++ fp->ptregs.format); ++ else ++ printk(KERN_WARNING "*** Exception %d *** FORMAT=%X\n", ++ fp->ptregs.vector, ++ fp->ptregs.format); ++ printk(KERN_WARNING "Current process id is %d\n", current->pid); ++ die_if_kernel("BAD KERNEL TRAP", &fp->ptregs, 0); ++} ++ ++asmlinkage void trap_c(struct frame *fp) ++{ ++ int sig; ++ siginfo_t info; ++ ++ if (fp->ptregs.sr & PS_S) { ++ if (fp->ptregs.vector == VEC_TRACE) { ++ /* traced a trapping instruction */ ++ current->ptrace |= PT_DTRACE; ++ } else ++ bad_super_trap(fp); ++ return; ++ } ++ ++ /* send the appropriate signal to the user program */ ++ switch (fp->ptregs.vector) { ++ case VEC_ADDRERR: ++ info.si_code = BUS_ADRALN; ++ sig = SIGBUS; ++ break; ++ case VEC_ILLEGAL: ++ case VEC_LINE10: ++ case VEC_LINE11: ++ info.si_code = ILL_ILLOPC; ++ sig = SIGILL; ++ break; ++ case VEC_PRIV: ++ info.si_code = ILL_PRVOPC; ++ sig = SIGILL; ++ break; ++ case VEC_COPROC: ++ info.si_code = ILL_COPROC; ++ sig = SIGILL; ++ break; ++ case VEC_TRAP1: /* gdbserver breakpoint */ ++ fp->ptregs.pc -= 2; ++ info.si_code = TRAP_TRACE; ++ sig = SIGTRAP; ++ break; ++ case VEC_TRAP2: ++ case VEC_TRAP3: ++ case VEC_TRAP4: ++ case VEC_TRAP5: ++ case VEC_TRAP6: ++ case VEC_TRAP7: ++ case VEC_TRAP8: ++ case VEC_TRAP9: ++ case VEC_TRAP10: ++ case VEC_TRAP11: ++ case VEC_TRAP12: ++ case VEC_TRAP13: ++ case VEC_TRAP14: ++ info.si_code = ILL_ILLTRP; ++ sig = SIGILL; ++ break; ++ case VEC_FPBRUC: ++ case VEC_FPOE: ++ case VEC_FPNAN: ++ info.si_code = FPE_FLTINV; ++ sig = SIGFPE; ++ break; ++ case VEC_FPIR: ++ info.si_code = FPE_FLTRES; ++ sig = SIGFPE; ++ break; ++ case VEC_FPDIVZ: ++ info.si_code = FPE_FLTDIV; ++ sig = SIGFPE; ++ break; ++ case VEC_FPUNDER: ++ info.si_code = FPE_FLTUND; ++ sig = SIGFPE; ++ break; ++ case VEC_FPOVER: ++ info.si_code = FPE_FLTOVF; ++ sig = SIGFPE; ++ break; ++ case VEC_ZERODIV: ++ info.si_code = FPE_INTDIV; ++ sig = SIGFPE; ++ break; ++ case VEC_CHK: ++ case VEC_TRAP: ++ info.si_code = FPE_INTOVF; ++ sig = SIGFPE; ++ break; ++ case VEC_TRACE: /* ptrace single step */ ++ info.si_code = TRAP_TRACE; ++ sig = SIGTRAP; ++ break; ++ case VEC_TRAP15: /* breakpoint */ ++ info.si_code = TRAP_BRKPT; ++ sig = SIGTRAP; ++ break; ++ default: ++ info.si_code = ILL_ILLOPC; ++ sig = SIGILL; ++ break; ++ } ++ info.si_signo = sig; ++ info.si_errno = 0; ++ switch (fp->ptregs.format) { ++ default: ++ info.si_addr = (void *) fp->ptregs.pc; ++ break; ++ case 2: ++ info.si_addr = (void *) fp->un.fmt2.iaddr; ++ break; ++ case 7: ++ info.si_addr = (void *) fp->un.fmt7.effaddr; ++ break; ++ case 9: ++ info.si_addr = (void *) fp->un.fmt9.iaddr; ++ break; ++ case 10: ++ info.si_addr = (void *) fp->un.fmta.daddr; ++ break; ++ case 11: ++ info.si_addr = (void *) fp->un.fmtb.daddr; ++ break; ++ } ++ force_sig_info(sig, &info, current); ++} ++ ++asmlinkage void set_esp0(unsigned long ssp) ++{ ++ current->thread.esp0 = ssp; ++} ++ ++/* ++ * The architecture-independent backtrace generator ++ */ ++void dump_stack(void) ++{ ++ unsigned long stack; ++ ++ show_stack(current, &stack); ++} ++EXPORT_SYMBOL(dump_stack); ++ ++#ifdef CONFIG_M68KFPU_EMU ++asmlinkage void fpemu_signal(int signal, int code, void *addr) ++{ ++ siginfo_t info; ++ ++ info.si_signo = signal; ++ info.si_errno = 0; ++ info.si_code = code; ++ info.si_addr = addr; ++ force_sig_info(signal, &info, current); ++} ++#endif +--- /dev/null ++++ b/arch/m68k/coldfire/usb/Makefile +@@ -0,0 +1,28 @@ ++# ++# Makefile for the linux kernel. ++# ++ ++# Object file lists. ++ ++ifneq ($(CONFIG_USB_EHCI_HCD),) ++ obj-y += otg_host.o ++endif ++ ++ifneq ($(CONFIG_USB_GADGET_MCF5445X),) ++ obj-y += otg_device.o ++endif ++ ++ifneq ($(strip $(CONFIG_USB_GADGET_MCF5445X) $(CONFIG_USB_EHCI_HCD)),) ++ obj-y += otg_cmn.o ++endif ++ ++ifneq ($(CONFIG_USB_OTG),) ++ obj-y += otg_otg.o ++endif ++ ++ ++# USB Transceiver driver: ++ifneq ($(strip $(CONFIG_USB) $(CONFIG_USB_GADGET_MCF5445X)),) ++ obj-y += xcvr.o ++endif ++ +--- /dev/null ++++ b/arch/m68k/coldfire/usb/otg_cmn.c +@@ -0,0 +1,106 @@ ++/* ++ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. ++ */ ++ ++/* ++ * The code contained herein is licensed under the GNU General Public ++ * License. You may obtain a copy of the GNU General Public License ++ * Version 2 or later at the following locations: ++ * ++ * http://www.opensource.org/licenses/gpl-license.html ++ * http://www.gnu.org/copyleft/gpl.html ++ */ ++ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/types.h> ++#include <linux/err.h> ++#include <linux/errno.h> ++#include <linux/init.h> ++#include <linux/io.h> ++#include <linux/irq.h> ++#include <linux/platform_device.h> ++#include <linux/delay.h> ++#include <linux/fsl_devices.h> ++#include <linux/usb/fsl_xcvr.h> ++ ++#include <asm/system.h> ++#include <asm/coldfire.h> ++ ++extern void fsl_usb_enable_clk(void); ++extern void fsl_usb_disable_clk(void); ++extern int fsl_usb_mem_init(struct platform_device *pdev); ++ ++extern struct fsl_xcvr_ops *xc_ops[]; ++ ++static int otg_used; ++ ++int usbotg_init(struct platform_device *pdev) ++{ ++ struct fsl_usb2_platform_data *pdata; ++ struct fsl_xcvr_ops *xops = xc_ops[USB_CTRLR_OTG]; ++ int rc; ++ ++ pdata = (struct fsl_usb2_platform_data *)pdev->dev.platform_data; ++ ++ pr_debug("%s: pdev=0x%p pdata=0x%p\n", __FUNCTION__, pdev, pdata); ++ ++ if (!xops) { ++ printk(KERN_ERR "OTG transceiver ops missing\n"); ++ return -EINVAL; ++ } ++ pdata->xcvr_ops = xops; ++ pdata->xcvr_type = xops->xcvr_type; ++ ++ if (!otg_used) { ++ /* request_mem_region and ioremap registers */ ++ rc = fsl_usb_mem_init(pdev); ++ if (rc) ++ return rc; ++ ++ fsl_usb_enable_clk(); ++ ++ if (xops->init) ++ xops->init(pdev); ++ } ++ ++ otg_used++; ++ pr_debug("%s: success\n", __FUNCTION__); ++ return 0; ++} ++ ++void usbotg_uninit(struct platform_device *pdev) ++{ ++ struct fsl_usb2_platform_data *pdata; ++ pdata = (struct fsl_usb2_platform_data *)pdev->dev.platform_data; ++ ++ pr_debug("%s\n", __FUNCTION__); ++ ++ otg_used--; ++ if (!otg_used) { ++ if (pdata->xcvr_ops && pdata->xcvr_ops->uninit) ++ pdata->xcvr_ops->uninit(pdev); ++ ++ iounmap(pdata->regs); ++ release_mem_region(pdata->r_start, pdata->r_len); ++ ++ pdata->regs = NULL; ++ pdata->r_start = pdata->r_len = 0; ++ ++ fsl_usb_disable_clk(); ++ } ++} ++ ++struct fsl_usb2_platform_data mxc_otg_config = { ++ .name = "OTG", ++ .platform_init = usbotg_init, ++ .platform_uninit = usbotg_uninit, ++ .es = 1, ++ .big_endian_mmio = 1, ++ .big_endian_desc = 1, ++ .le_setup_buf = 1, ++ .does_otg = 1, ++ .power_budget = 500, /* 500 mA max power */ ++ .max_ep_nr = 4, /* DDD read from a register ? */ ++ .phy_mode = FSL_USB2_PHY_ULPI, /* DDD redundant with xcvr_type */ ++}; +--- /dev/null ++++ b/arch/m68k/coldfire/usb/otg_device.c +@@ -0,0 +1,89 @@ ++/* ++ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. ++ */ ++ ++/* ++ * The code contained herein is licensed under the GNU General Public ++ * License. You may obtain a copy of the GNU General Public License ++ * Version 2 or later at the following locations: ++ * ++ * http://www.opensource.org/licenses/gpl-license.html ++ * http://www.gnu.org/copyleft/gpl.html ++ */ ++ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/types.h> ++#include <linux/errno.h> ++#include <linux/init.h> ++#include <linux/io.h> ++#include <linux/irq.h> ++#include <linux/err.h> ++#include <linux/platform_device.h> ++#include <linux/usb/otg.h> ++#include <linux/delay.h> ++#include <linux/fsl_devices.h> ++#include <linux/usb/fsl_xcvr.h> ++ ++#include <asm/system.h> ++#include <asm/coldfire.h> ++ ++#define USB_OTGREGS_BASE MCF_REG32(0xFC0B0000) ++#define INT_USB (64 + 64 + 47) /* INTC1:47 16.2.9.1 */ ++#define INT_UOCSR (64 + 64 + 53) /* INTC1:53 16.2.9.1 */ ++ ++extern int usbotg_init(struct platform_device *pdev); ++extern void usbotg_uninit(struct fsl_usb2_platform_data *pdata); ++extern struct fsl_usb2_platform_data mxc_otg_config; ++ ++struct platform_device otg_udc_device; ++ ++/*! ++ * OTG Gadget device ++ */ ++ ++static void usb_release(struct device *dev) ++{ ++ /* normally not freed */ ++} ++ ++static u64 udc_dmamask = ~(u32) 0; ++static struct resource otg_udc_resources[] = { ++ [0] = { ++ .start = (u32) (&USB_OTGREGS_BASE), ++ .end = (u32) (&USB_OTGREGS_BASE + 0x1ff), ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = INT_USB, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++ ++struct platform_device otg_udc_device = { ++ .name = "fsl-usb2-udc", ++ .id = -1, ++ .dev = { ++ .release = usb_release, ++ .dma_mask = &udc_dmamask, ++ .coherent_dma_mask = 0xffffffff, ++ .platform_data = &mxc_otg_config, ++ }, ++ .resource = otg_udc_resources, ++ .num_resources = ARRAY_SIZE(otg_udc_resources), ++}; ++ ++static int __init udc_init(void) ++{ ++ int rc __attribute((unused)); ++ ++ rc = platform_device_register(&otg_udc_device); ++ if (rc) ++ printk(KERN_ERR "usb: can't register OTG Gadget, rc=%d\n", rc); ++ else ++ printk(KERN_INFO "usb: OTG Gadget registered\n"); ++ return rc; ++} ++ ++subsys_initcall(udc_init); +--- /dev/null ++++ b/arch/m68k/coldfire/usb/otg_host.c +@@ -0,0 +1,68 @@ ++/* ++ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. ++ */ ++ ++/* ++ * The code contained herein is licensed under the GNU General Public ++ * License. You may obtain a copy of the GNU General Public License ++ * Version 2 or later at the following locations: ++ * ++ * http://www.opensource.org/licenses/gpl-license.html ++ * http://www.gnu.org/copyleft/gpl.html ++ */ ++ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/types.h> ++#include <linux/errno.h> ++#include <linux/init.h> ++#include <linux/io.h> ++#include <linux/irq.h> ++#include <linux/err.h> ++#include <linux/platform_device.h> ++#include <linux/delay.h> ++#include <linux/fsl_devices.h> ++#include <linux/usb/fsl_xcvr.h> ++ ++#include <asm/system.h> ++#include <asm/mcfsim.h> ++ ++#define USB_OTGREGS_BASE MCF_REG32(0xFC0B0000) ++#define INT_USB (64 + 64 + 47) /* INTC1:47 16.2.9.1 */ ++#define INT_UOCSR (64 + 64 + 53) /* INTC1:53 16.2.9.1 */ ++ ++struct platform_device *otg_host_device; ++ ++extern struct platform_device *host_pdev_register(struct resource *res, ++ int n_res, ++ struct fsl_usb2_platform_data ++ *config); ++ ++extern int usbotg_init(struct platform_device *pdev); ++extern void usbotg_uninit(struct fsl_usb2_platform_data *pdata); ++extern struct fsl_usb2_platform_data mxc_otg_config; ++ ++/*! ++ * OTG host config ++ */ ++static struct resource otg_host_resources[] = { ++ [0] = { ++ .start = (u32) (&USB_OTGREGS_BASE), ++ .end = (u32) (&USB_OTGREGS_BASE + 0x1ff), ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = INT_USB, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static int __init otg_host_init(void) ++{ ++ otg_host_device = host_pdev_register(otg_host_resources, ++ ARRAY_SIZE(otg_host_resources), ++ &mxc_otg_config); ++ return 0; ++} ++ ++subsys_initcall(otg_host_init); +--- /dev/null ++++ b/arch/m68k/coldfire/usb/otg_otg.c +@@ -0,0 +1,96 @@ ++/* ++ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. ++ */ ++ ++/* ++ * The code contained herein is licensed under the GNU General Public ++ * License. You may obtain a copy of the GNU General Public License ++ * Version 2 or later at the following locations: ++ * ++ * http://www.opensource.org/licenses/gpl-license.html ++ * http://www.gnu.org/copyleft/gpl.html ++ */ ++ ++/* ++ * platform_device registration for ULPI OTG device ++ */ ++ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/types.h> ++#include <linux/errno.h> ++#include <linux/init.h> ++#include <linux/err.h> ++#include <linux/platform_device.h> ++#include <linux/fsl_devices.h> ++ ++#include <asm/mcfsim.h> ++ ++#define USB_OTGREGS_BASE MCF_REG32(0xFC0B0000) ++#define INT_USB (64 + 64 + 47) /* INTC1:47 16.2.9.1 */ ++#define INT_UOCSR (64 + 64 + 53) /* INTC1:53 16.2.9.1 */ ++ ++extern int usbotg_init(struct platform_device *pdev); ++extern void usbotg_uninit(struct fsl_usb2_platform_data *pdata); ++extern struct fsl_usb2_platform_data mxc_otg_config; ++ ++static void otg_otg_release(struct device *dev) ++{ ++ /* normally not freed */ ++} ++ ++/* *INDENT-OFF* */ ++static struct resource otg_otg_resources[] = { ++ [0] = { ++ .start = (u32) (&USB_OTGREGS_BASE), ++ .end = (u32) (&USB_OTGREGS_BASE + 0x1ff), ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = INT_USB, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++/*! ++ * OTG device ++ */ ++static u64 otg_otg_dmamask = ~(u32) 0; ++static struct platform_device otg_otg_device = { ++ .name = "fsl-usb2-otg", ++ .id = -1, ++ .dev = { ++ .release = otg_otg_release, ++ .dma_mask = &otg_otg_dmamask, ++ .coherent_dma_mask = 0xffffffff, ++ .platform_data = &mxc_otg_config, ++ }, ++ .resource = otg_otg_resources, ++ .num_resources = ARRAY_SIZE(otg_otg_resources), ++}; ++/* *INDENT-ON* */ ++ ++static int __init mx31_otg_otg_init(void) ++{ ++ int rc = 0; ++ ++ pr_debug("register OTG otg res=0x%p, size=%d\n", ++ otg_otg_device.resource, otg_otg_device.num_resources); ++ ++ rc = platform_device_register(&otg_otg_device); ++ if (rc) { ++ pr_debug("can't register ULPI OTG dvc, %d\n", rc); ++ } else { ++ printk(KERN_INFO "usb: OTG ULPI transceiver registered\n"); ++ pr_debug("otg_otg_device=0x%p resources=0x%p.\n", ++ &otg_otg_device, otg_otg_device.resource); ++ } ++ ++ return rc; ++} ++ ++subsys_initcall(mx31_otg_otg_init); ++ ++MODULE_AUTHOR("Freescale Semiconductor, Inc."); ++MODULE_DESCRIPTION("ULPI OTG device registration"); ++MODULE_LICENSE("GPL"); +--- /dev/null ++++ b/arch/m68k/coldfire/usb/xcvr.c +@@ -0,0 +1,156 @@ ++/* ++ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. ++ */ ++ ++/* ++ * The code contained herein is licensed under the GNU General Public ++ * License. You may obtain a copy of the GNU General Public License ++ * Version 2 or later at the following locations: ++ * ++ * http://www.opensource.org/licenses/gpl-license.html ++ * http://www.gnu.org/copyleft/gpl.html ++ */ ++ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/types.h> ++#include <linux/errno.h> ++#include <linux/init.h> ++#include <linux/err.h> ++#include <linux/platform_device.h> ++#include <linux/delay.h> ++#include <linux/fsl_devices.h> ++#include <linux/usb/fsl_xcvr.h> ++#include <linux/usb/fsl_usb2.h> ++ ++#include <asm/mcfsim.h> ++ ++extern void fsl_usb_xcvr_register(struct fsl_xcvr_ops *xcvr_ops); ++extern void fsl_usb_xcvr_unregister(enum fsl_usb_ctrlr ctrlr); ++ ++#define MCF_SCM_BCR MCF_REG32(0xFC040024) ++#define MCF_SCM_BCR_GBR (1 << 9) /* global bursts for read */ ++#define MCF_SCM_BCR_GBW (1 << 8) /* global bursts for write */ ++#define MCF_SCM_BCR_SBE_ALL (0xff << 0) /* slave burst enable */ ++ ++ ++#ifdef ULPI_DEBUG ++void print_ulpi_regs(void) ++{ ++ pr_debug("MCF_SCM_BCR=0x%08lx MCF_CCM_MISCCR=0x%08x " ++ "MCF_GPIO_PAR_DMA=0x%08x MCF_GPIO_PAR_USB=08%08x " ++ "MCF_GPIO_PAR_FEC=08%08x\n", ++ MCF_SCM_BCR, MCF_CCM_MISCCR, MCF_GPIO_PAR_DMA, ++ MCF_GPIO_PAR_USB, MCF_GPIO_PAR_FEC); ++} ++EXPORT_SYMBOL(print_ulpi_regs); ++#endif ++ ++ ++static void xcvr_init(struct platform_device *pdev) ++{ ++ struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; ++ struct fsl_xcvr_ops *this = pdata->xcvr_ops; ++ struct fsl_usb_host_regs *regs = pdata->regs; ++ ++ pr_debug("%s: ctrlr=%d pdata=0x%p regs=0x%p\n", __FUNCTION__, ++ this->ctrlr, pdata, pdata->regs); ++ ++ /* enable USB read, write and slave bursts */ ++ MCF_SCM_BCR = MCF_SCM_BCR_GBR | MCF_SCM_BCR_GBW | MCF_SCM_BCR_SBE_ALL; ++ ++ /* Use external clock source if PLL isn't a multiple of 60MHz */ ++ MCF_CCM_MISCCR &= ~MCF_CCM_MISCCR_USBSRC; ++ ++ /* Initialize the USB Clock: use USB input clock */ ++ MCF_GPIO_PAR_DMA = (MCF_GPIO_PAR_DMA & MCF_GPIO_PAR_DMA_DREQ1_MASK) | ++ MCF_GPIO_PAR_DMA_DREQ1_USB_CLKIN; ++ ++ switch (this->xcvr_type) { ++ case PORTSCX_PTS_ULPI: ++ /* Enable the required ULPI signals */ ++ MCF_GPIO_PAR_DMA = (MCF_GPIO_PAR_DMA & ++ MCF_GPIO_PAR_DMA_DACK1_MASK) | ++ MCF_GPIO_PAR_DMA_DACK1_ULPI_DIR; ++ ++ MCF_GPIO_PAR_USB = MCF_GPIO_PAR_USB_VBUSEN_ULPI_NXT | ++ MCF_GPIO_PAR_USB_VBUSOC_ULPI_STP; ++ ++ MCF_GPIO_PAR_FEC = (MCF_GPIO_PAR_FEC & ++ MCF_GPIO_PAR_FEC_FEC0_MASK) | ++ MCF_GPIO_PAR_FEC_FEC0_RMII_ULPI; ++ break; ++ case PORTSCX_PTS_ONCHIP: ++ /* Enable VBUS_EN and VBUS_OC signals */ ++ MCF_GPIO_PAR_USB = MCF_GPIO_PAR_USB_VBUSEN_VBUSEN | ++ MCF_GPIO_PAR_USB_VBUSOC_VBUSOC; ++ ++ /* Setup USB_VBUS_OC signal to be active-low */ ++ MCF_CCM_MISCCR |= MCF_CCM_MISCCR_USBOC; ++ ++ break; ++ } ++ ++ pr_debug("®s->portsc1=0x%p old portsc1=0x%x \n", ®s->portsc1, ++ regs->portsc1); ++ ++ regs->portsc1 &= ~PORTSCX_PTS_MASK; ++ regs->portsc1 |= this->xcvr_type; ++ ++ /* ++ * need to reset the controller here so that the ID pin ++ * is correctly detected. ++ */ ++ regs->usbcmd |= USB_CMD_CTRL_RESET; ++ ++ /* ++ * allow controller to reset, and leave time for ++ * the ULPI transceiver to reset too. ++ */ ++ mdelay(10); ++ ++ pr_debug("DDD %s: done. portsc1=0x%x\n", __FUNCTION__, regs->portsc1); ++} ++ ++static void xcvr_uninit(struct platform_device *pdev) ++{ ++ pr_debug("%s: pdev=0x%p\n", __FUNCTION__, pdev); ++} ++ ++ ++struct fsl_xcvr_ops xcvr_ops_otg = { ++ .ctrlr = USB_CTRLR_OTG, ++ .init = xcvr_init, ++ .uninit = xcvr_uninit, ++ ++#ifdef CONFIG_USB_M5445X_ULPI ++ .xcvr_type = PORTSCX_PTS_ULPI, ++#elif defined CONFIG_USB_M5445X_FSLS ++ .xcvr_type = PORTSCX_PTS_ONCHIP, ++#else ++#error "Invalid USB transceiver selection." ++#endif ++}; ++ ++static int __init usb_xcvr_init(void) ++{ ++ pr_debug("%s\n", __FUNCTION__); ++ ++ fsl_usb_xcvr_register(&xcvr_ops_otg); ++ ++ pr_debug("%s done\n", __FUNCTION__); ++ return 0; ++} ++ ++static void __exit usb_xcvr_exit(void) ++{ ++ fsl_usb_xcvr_unregister(USB_CTRLR_OTG); ++} ++ ++module_init(usb_xcvr_init); ++module_exit(usb_xcvr_exit); ++ ++MODULE_AUTHOR("Freescale Semiconductor, Inc."); ++MODULE_DESCRIPTION("External ULPI xcvr driver"); ++MODULE_LICENSE("GPL"); ++ +--- /dev/null ++++ b/arch/m68k/coldfire/usb.c +@@ -0,0 +1,182 @@ ++/* ++ * ++ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. ++ * ++ * otg_{get,set}_transceiver() are from arm/plat-omap/usb.c. ++ * which is Copyright (C) 2004 Texas Instruments, Inc. ++ */ ++ ++/* ++ * The code contained herein is licensed under the GNU General Public ++ * License. You may obtain a copy of the GNU General Public License ++ * Version 2 or later at the following locations: ++ * ++ * http://www.opensource.org/licenses/gpl-license.html ++ * http://www.gnu.org/copyleft/gpl.html ++ */ ++ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/types.h> ++#include <linux/errno.h> ++#include <linux/init.h> ++#include <linux/io.h> ++#include <linux/err.h> ++#include <linux/platform_device.h> ++#include <linux/usb/otg.h> ++#include <linux/delay.h> ++#include <linux/fsl_devices.h> ++#include <linux/usb/fsl_xcvr.h> ++ ++ ++/* The dmamask must be set for EHCI to work */ ++static u64 ehci_dmamask = ~(u32) 0; ++ ++struct fsl_xcvr_ops *xc_ops[3] = { NULL }; ++ ++void fsl_usb_enable_clk(void) ++{ ++} ++EXPORT_SYMBOL(fsl_usb_enable_clk); ++ ++void fsl_usb_disable_clk(void) ++{ ++} ++EXPORT_SYMBOL(fsl_usb_disable_clk); ++ ++void fsl_usb_xcvr_register(struct fsl_xcvr_ops *xcvr_ops) ++{ ++ pr_debug("%s ctrlr=%d\n", __FUNCTION__, xcvr_ops->ctrlr); ++ xc_ops[xcvr_ops->ctrlr] = xcvr_ops; ++ ++} ++EXPORT_SYMBOL(fsl_usb_xcvr_register); ++ ++void fsl_usb_xcvr_unregister(enum fsl_usb_ctrlr ctrlr) ++{ ++ pr_debug("%s ctrlr=%d\n", __FUNCTION__, ctrlr); ++ xc_ops[ctrlr] = NULL; ++} ++EXPORT_SYMBOL(fsl_usb_xcvr_unregister); ++ ++/*! ++ * Register an instance of a USB host platform device. ++ * ++ * @param res: resource pointer ++ * @param n_res: number of resources ++ * @param config: config pointer ++ * ++ * @return newly-registered platform_device ++ * ++ * DDD fix this comment: ++ * The USB controller supports 3 host interfaces, and the ++ * kernel can be configured to support some number of them. ++ * Each supported host interface is registered as an instance ++ * of the "fsl-ehci" device. Call this function multiple times ++ * to register each host interface. ++ */ ++static int instance_id; ++struct platform_device *host_pdev_register(struct resource *res, int n_res, ++ struct fsl_usb2_platform_data *config) ++{ ++ struct platform_device *pdev; ++ ++ pr_debug("register host res=0x%p, size=%d\n", res, n_res); ++ ++ pdev = platform_device_register_simple("fsl-ehci", ++ instance_id, res, n_res); ++ if (IS_ERR(pdev)) { ++ printk(KERN_ERR "usb: can't register %s Host, %ld\n", ++ config->name, PTR_ERR(pdev)); ++ return NULL; ++ } ++ ++ pdev->dev.coherent_dma_mask = 0xffffffff; ++ pdev->dev.dma_mask = &ehci_dmamask; ++ ++ /* ++ * platform_device_add_data() makes a copy of ++ * the platform_data passed in. That makes it ++ * impossible to share the same config struct for ++ * all OTG devices (host,gadget,otg). So, just ++ * set the platform_data pointer ourselves. ++ */ ++ pdev->dev.platform_data = config; ++ ++ printk(KERN_INFO "usb: %s Host registered\n", config->name); ++ pr_debug("pdev=0x%p dev=0x%p resources=0x%p pdata=0x%p\n", ++ pdev, &pdev->dev, pdev->resource, pdev->dev.platform_data); ++ ++ instance_id++; ++ ++ return pdev; ++} ++ ++ ++int fsl_usb_mem_init(struct platform_device *pdev) ++{ ++ struct resource *res; ++ struct fsl_usb2_platform_data *pdata; ++ ++ pdata = (struct fsl_usb2_platform_data *)pdev->dev.platform_data; ++ ++ pr_debug("%s: pdev=0x%p pdata=0x%p\n", __FUNCTION__, pdev, pdata); ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!res) { ++ dev_err(&pdev->dev, "no MEM resource.\n"); ++ return -ENODEV; ++ } ++ ++ pdata->r_start = res->start; ++ pdata->r_len = res->end - res->start + 1; ++ pr_debug("%s: MEM resource start=0x%x len=0x%x\n", pdata->name, ++ res->start, pdata->r_len); ++ ++ if (!request_mem_region(pdata->r_start, pdata->r_len, "OTG")) { ++ dev_err(&pdev->dev, "request_mem_region failed\n"); ++ return -EBUSY; ++ } ++ pdata->regs = ioremap(pdata->r_start, pdata->r_len); ++ pr_debug("ioremapped to 0x%p\n", pdata->regs); ++ ++ if (pdata->regs == NULL) { ++ dev_err(&pdev->dev, "ioremap failed\n"); ++ release_mem_region(pdata->r_start, pdata->r_len); ++ return -EFAULT; ++ } ++ ++ pr_debug("%s: success\n", __FUNCTION__); ++ return 0; ++} ++ ++ ++#if defined(CONFIG_USB_OTG) ++static struct otg_transceiver *xceiv; ++ ++/** ++ * otg_get_transceiver - find the (single) OTG transceiver driver ++ * ++ * Returns the transceiver driver, after getting a refcount to it; or ++ * null if there is no such transceiver. The caller is responsible for ++ * releasing that count. ++ */ ++struct otg_transceiver *otg_get_transceiver(void) ++{ ++ pr_debug("%s xceiv=0x%p\n", __FUNCTION__, xceiv); ++ if (xceiv) ++ get_device(xceiv->dev); ++ return xceiv; ++} ++EXPORT_SYMBOL(otg_get_transceiver); ++ ++int otg_set_transceiver(struct otg_transceiver *x) ++{ ++ pr_debug("%s xceiv=0x%p x=0x%p\n", __FUNCTION__, xceiv, x); ++ if (xceiv && x) ++ return -EBUSY; ++ xceiv = x; ++ return 0; ++} ++EXPORT_SYMBOL(otg_set_transceiver); ++#endif +--- /dev/null ++++ b/arch/m68k/coldfire/vmlinux-cf.lds +@@ -0,0 +1,130 @@ ++/* ld script to make m68k Coldfire Linux kernel ++ * ++ * Derived from arch/m68k/kernel/vmlinux-std.lds ++ * ++ * Updated 11/26/2007 for new CodeSourcery toolset ++ * by Kurt Mahan <kmahan@freescale.com> ++ */ ++ ++#define LOAD_OFFSET 0x00000000 ++ ++#include <asm-generic/vmlinux.lds.h> ++#include <asm/page_offset.h> ++ ++#define START_OFFSET 0x00020000 ++#define IMAGE_START PAGE_OFFSET_RAW + START_OFFSET ++ ++OUTPUT_FORMAT("elf32-m68k", "elf32-m68k", "elf32-m68k") ++OUTPUT_ARCH(m68k) ++ENTRY(_stext) ++jiffies = jiffies_64 + 4; ++ ++SECTIONS ++{ ++ . = IMAGE_START; ++ .text.head : AT(ADDR(.text.head) - LOAD_OFFSET) { ++ _text = .; /* Text and read-only data */ ++ *(.text.head) ++ } :text = 0x4e75 ++ ++ .text : AT(ADDR(.text) - LOAD_OFFSET) { ++ TEXT_TEXT ++ SCHED_TEXT ++ LOCK_TEXT ++ *(.fixup) ++ *(.gnu.warning) ++ } :text = 0x4e75 ++ _etext = .; /* End of text section */ ++ ++ . = ALIGN(16); ++ __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { ++ __start___ex_table = .; ++ *(__ex_table) ++ __stop___ex_table = .; ++ } ++ ++ RODATA ++ ++ . = ALIGN(8192); ++ .data : AT(ADDR(.data) - LOAD_OFFSET) { /* Data */ ++ DATA_DATA ++ CONSTRUCTORS ++ } :data ++ ++ ++ . = ALIGN(16); ++ .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET ) { ++ *(.data.cacheline_aligned) ++ } :data ++ ++ _edata = .; /* End of data section */ ++ ++ NOTES /* support ld --build-id */ ++ ++ . = ALIGN(8192); /* Initrd */ ++ .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) { ++ __init_begin = .; ++ _sinittext = .; ++ *(.init.text) ++ _einittext = .; ++ } ++ ++ .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { ++ *(.init.data) ++ } ++ ++ . = ALIGN(16); ++ .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) { ++ __setup_start = .; ++ *(.init.setup) ++ __setup_end = .; ++ } ++ ++ .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) { ++ __initcall_start = .; ++ INITCALLS ++ __initcall_end = .; ++ } ++ ++ .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) { ++ __con_initcall_start = .; ++ *(.con_initcall.init) ++ __con_initcall_end = .; ++ } ++ ++ SECURITY_INIT ++ ++#ifdef CONFIG_BLK_DEV_INITRD ++ . = ALIGN(8192); ++ .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) { ++ __initramfs_start = .; ++ *(.init.ramfs) ++ __initramfs_end = .; ++ } ++#endif ++ ++ . = ALIGN(8192); ++ __init_end = .; ++ ++ .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) { ++ *(.data.init_task) /* The initial task and kernel stack */ ++ } ++ ++ _sbss = .; ++ .bss : AT(ADDR(.bss) - LOAD_OFFSET) { /* BSS */ ++ *(.bss) ++ } ++ _ebss = .; ++ ++ _end = . ; ++ ++ /* Sections to be discarded */ ++ /DISCARD/ : { ++ *(.exit.text) ++ *(.exit.data) ++ *(.exitcall.exit) ++ } ++ ++ /* Stabs debugging sections. */ ++ STABS_DEBUG ++} +--- /dev/null ++++ b/arch/m68k/configs/55_defconfig +@@ -0,0 +1,830 @@ ++# ++# Automatically generated make config: don't edit ++# Linux kernel version: 2.6.25 ++# Thu Jun 26 16:17:41 2008 ++# ++CONFIG_M68K=y ++CONFIG_MMU=y ++# CONFIG_GENERIC_TIME is not set ++# CONFIG_GENERIC_CLOCKEVENTS is not set ++CONFIG_RWSEM_GENERIC_SPINLOCK=y ++# CONFIG_ARCH_HAS_ILOG2_U32 is not set ++# CONFIG_ARCH_HAS_ILOG2_U64 is not set ++CONFIG_GENERIC_HWEIGHT=y ++CONFIG_GENERIC_CALIBRATE_DELAY=y ++CONFIG_TIME_LOW_RES=y ++CONFIG_GENERIC_IOMAP=y ++# CONFIG_NO_IOPORT is not set ++# CONFIG_NO_DMA is not set ++CONFIG_ARCH_SUPPORTS_AOUT=y ++CONFIG_HZ=100 ++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" ++ ++# ++# General setup ++# ++CONFIG_EXPERIMENTAL=y ++CONFIG_BROKEN_ON_SMP=y ++CONFIG_INIT_ENV_ARG_LIMIT=32 ++CONFIG_LOCALVERSION="" ++CONFIG_LOCALVERSION_AUTO=y ++CONFIG_SWAP=y ++CONFIG_SYSVIPC=y ++CONFIG_SYSVIPC_SYSCTL=y ++# CONFIG_POSIX_MQUEUE is not set ++# CONFIG_BSD_PROCESS_ACCT is not set ++# CONFIG_TASKSTATS is not set ++# CONFIG_AUDIT is not set ++CONFIG_IKCONFIG=y ++CONFIG_IKCONFIG_PROC=y ++CONFIG_LOG_BUF_SHIFT=17 ++# CONFIG_CGROUPS is not set ++CONFIG_GROUP_SCHED=y ++CONFIG_FAIR_GROUP_SCHED=y ++# CONFIG_RT_GROUP_SCHED is not set ++CONFIG_USER_SCHED=y ++# CONFIG_CGROUP_SCHED is not set ++CONFIG_SYSFS_DEPRECATED=y ++CONFIG_SYSFS_DEPRECATED_V2=y ++# CONFIG_RELAY is not set ++CONFIG_NAMESPACES=y ++# CONFIG_UTS_NS is not set ++# CONFIG_IPC_NS is not set ++# CONFIG_USER_NS is not set ++# CONFIG_PID_NS is not set ++# CONFIG_BLK_DEV_INITRD is not set ++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set ++CONFIG_SYSCTL=y ++# CONFIG_EMBEDDED is not set ++CONFIG_UID16=y ++CONFIG_SYSCTL_SYSCALL=y ++CONFIG_KALLSYMS=y ++# CONFIG_KALLSYMS_ALL is not set ++# CONFIG_KALLSYMS_EXTRA_PASS is not set ++CONFIG_HOTPLUG=y ++CONFIG_PRINTK=y ++CONFIG_BUG=y ++CONFIG_ELF_CORE=y ++CONFIG_COMPAT_BRK=y ++CONFIG_BASE_FULL=y ++CONFIG_FUTEX=y ++CONFIG_ANON_INODES=y ++CONFIG_EPOLL=y ++CONFIG_SIGNALFD=y ++CONFIG_TIMERFD=y ++CONFIG_EVENTFD=y ++CONFIG_SHMEM=y ++CONFIG_VM_EVENT_COUNTERS=y ++CONFIG_SLAB=y ++# CONFIG_SLUB is not set ++# CONFIG_SLOB is not set ++# CONFIG_PROFILING is not set ++# CONFIG_MARKERS is not set ++# CONFIG_HAVE_OPROFILE is not set ++# CONFIG_HAVE_KPROBES is not set ++# CONFIG_HAVE_KRETPROBES is not set ++CONFIG_PROC_PAGE_MONITOR=y ++CONFIG_SLABINFO=y ++CONFIG_RT_MUTEXES=y ++# CONFIG_TINY_SHMEM is not set ++CONFIG_BASE_SMALL=0 ++CONFIG_MODULES=y ++CONFIG_MODULE_UNLOAD=y ++CONFIG_MODULE_FORCE_UNLOAD=y ++# CONFIG_MODVERSIONS is not set ++# CONFIG_MODULE_SRCVERSION_ALL is not set ++# CONFIG_KMOD is not set ++CONFIG_BLOCK=y ++CONFIG_LBD=y ++# CONFIG_BLK_DEV_IO_TRACE is not set ++# CONFIG_LSF is not set ++# CONFIG_BLK_DEV_BSG is not set ++ ++# ++# IO Schedulers ++# ++CONFIG_IOSCHED_NOOP=y ++CONFIG_IOSCHED_AS=y ++CONFIG_IOSCHED_DEADLINE=y ++CONFIG_IOSCHED_CFQ=y ++# CONFIG_DEFAULT_AS is not set ++# CONFIG_DEFAULT_DEADLINE is not set ++CONFIG_DEFAULT_CFQ=y ++# CONFIG_DEFAULT_NOOP is not set ++CONFIG_DEFAULT_IOSCHED="cfq" ++CONFIG_CLASSIC_RCU=y ++ ++# ++# Platform dependent setup ++# ++# CONFIG_SUN3 is not set ++CONFIG_COLDFIRE=y ++CONFIG_CFV4E=y ++# CONFIG_AMIGA is not set ++# CONFIG_ATARI is not set ++# CONFIG_PCI is not set ++# CONFIG_MAC is not set ++# CONFIG_APOLLO is not set ++# CONFIG_VME is not set ++# CONFIG_HP300 is not set ++# CONFIG_SUN3X is not set ++# CONFIG_Q40 is not set ++ ++# ++# Processor type ++# ++# CONFIG_M68020 is not set ++# CONFIG_M68030 is not set ++# CONFIG_M68040 is not set ++# CONFIG_M68060 is not set ++CONFIG_M5445X=y ++# CONFIG_M54451 is not set ++CONFIG_M54455=y ++# CONFIG_M54451EVB is not set ++CONFIG_M54455EVB=y ++# CONFIG_M547X_8X is not set ++CONFIG_MCFCLK=266666666 ++# CONFIG_MCF_USER_HALT is not set ++CONFIG_MMU_CFV4E=y ++CONFIG_SDRAM_BASE=0x40000000 ++CONFIG_SDRAM_SIZE=0x10000000 ++CONFIG_NOR_FLASH_BASE=0x00000000 ++# CONFIG_M68KFPU_EMU is not set ++CONFIG_ADVANCED=y ++# CONFIG_RMW_INSNS is not set ++CONFIG_SINGLE_MEMORY_CHUNK=y ++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set ++CONFIG_SELECT_MEMORY_MODEL=y ++CONFIG_FLATMEM_MANUAL=y ++# CONFIG_DISCONTIGMEM_MANUAL is not set ++# CONFIG_SPARSEMEM_MANUAL is not set ++CONFIG_FLATMEM=y ++CONFIG_FLAT_NODE_MEM_MAP=y ++CONFIG_NEED_MULTIPLE_NODES=y ++# CONFIG_SPARSEMEM_STATIC is not set ++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set ++CONFIG_SPLIT_PTLOCK_CPUS=4 ++# CONFIG_RESOURCES_64BIT is not set ++CONFIG_ZONE_DMA_FLAG=1 ++CONFIG_BOUNCE=y ++CONFIG_VIRT_TO_BUS=y ++ ++# ++# General setup ++# ++CONFIG_BINFMT_ELF=y ++# CONFIG_BINFMT_AOUT is not set ++# CONFIG_BINFMT_MISC is not set ++CONFIG_PROC_HARDWARE=y ++CONFIG_ZONE_DMA=y ++# CONFIG_ARCH_SUPPORTS_MSI is not set ++ ++# ++# Power management options ++# ++# CONFIG_PM is not set ++ ++# ++# Networking ++# ++CONFIG_NET=y ++ ++# ++# Networking options ++# ++CONFIG_PACKET=y ++# CONFIG_PACKET_MMAP is not set ++CONFIG_UNIX=y ++CONFIG_XFRM=y ++# CONFIG_XFRM_USER is not set ++# CONFIG_XFRM_SUB_POLICY is not set ++# CONFIG_XFRM_MIGRATE is not set ++# CONFIG_XFRM_STATISTICS is not set ++CONFIG_NET_KEY=y ++# CONFIG_NET_KEY_MIGRATE is not set ++CONFIG_INET=y ++# CONFIG_IP_MULTICAST is not set ++CONFIG_IP_ADVANCED_ROUTER=y ++CONFIG_ASK_IP_FIB_HASH=y ++# CONFIG_IP_FIB_TRIE is not set ++CONFIG_IP_FIB_HASH=y ++# CONFIG_IP_MULTIPLE_TABLES is not set ++# CONFIG_IP_ROUTE_MULTIPATH is not set ++# CONFIG_IP_ROUTE_VERBOSE is not set ++CONFIG_IP_PNP=y ++# CONFIG_IP_PNP_DHCP is not set ++# CONFIG_IP_PNP_BOOTP is not set ++# CONFIG_IP_PNP_RARP is not set ++# CONFIG_NET_IPIP is not set ++# CONFIG_NET_IPGRE is not set ++# CONFIG_ARPD is not set ++# CONFIG_SYN_COOKIES is not set ++CONFIG_INET_AH=y ++CONFIG_INET_ESP=y ++# CONFIG_INET_IPCOMP is not set ++# CONFIG_INET_XFRM_TUNNEL is not set ++# CONFIG_INET_TUNNEL is not set ++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set ++# CONFIG_INET_XFRM_MODE_TUNNEL is not set ++# CONFIG_INET_XFRM_MODE_BEET is not set ++# CONFIG_INET_LRO is not set ++CONFIG_INET_DIAG=y ++CONFIG_INET_TCP_DIAG=y ++# CONFIG_TCP_CONG_ADVANCED is not set ++CONFIG_TCP_CONG_CUBIC=y ++CONFIG_DEFAULT_TCP_CONG="cubic" ++# CONFIG_TCP_MD5SIG is not set ++# CONFIG_IPV6 is not set ++# CONFIG_INET6_XFRM_TUNNEL is not set ++# CONFIG_INET6_TUNNEL is not set ++# CONFIG_NETWORK_SECMARK is not set ++# CONFIG_NETFILTER is not set ++# CONFIG_IP_DCCP is not set ++# CONFIG_IP_SCTP is not set ++# CONFIG_TIPC is not set ++# CONFIG_ATM is not set ++# CONFIG_BRIDGE is not set ++# CONFIG_VLAN_8021Q is not set ++# CONFIG_DECNET is not set ++# CONFIG_LLC2 is not set ++# CONFIG_IPX is not set ++# CONFIG_ATALK is not set ++# CONFIG_X25 is not set ++# CONFIG_LAPB is not set ++# CONFIG_ECONET is not set ++# CONFIG_WAN_ROUTER is not set ++# CONFIG_NET_SCHED is not set ++ ++# ++# Network testing ++# ++# CONFIG_NET_PKTGEN is not set ++# CONFIG_HAMRADIO is not set ++# CONFIG_CAN is not set ++# CONFIG_IRDA is not set ++# CONFIG_BT is not set ++# CONFIG_AF_RXRPC is not set ++ ++# ++# Wireless ++# ++# CONFIG_CFG80211 is not set ++# CONFIG_WIRELESS_EXT is not set ++# CONFIG_MAC80211 is not set ++# CONFIG_IEEE80211 is not set ++# CONFIG_RFKILL is not set ++# CONFIG_NET_9P is not set ++ ++# ++# Device Drivers ++# ++ ++# ++# Generic Driver Options ++# ++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" ++# CONFIG_STANDALONE is not set ++CONFIG_PREVENT_FIRMWARE_BUILD=y ++CONFIG_FW_LOADER=y ++# CONFIG_DEBUG_DRIVER is not set ++# CONFIG_DEBUG_DEVRES is not set ++# CONFIG_SYS_HYPERVISOR is not set ++# CONFIG_CONNECTOR is not set ++# CONFIG_MTD is not set ++# CONFIG_PARPORT is not set ++CONFIG_BLK_DEV=y ++# CONFIG_BLK_DEV_COW_COMMON is not set ++CONFIG_BLK_DEV_LOOP=y ++# CONFIG_BLK_DEV_CRYPTOLOOP is not set ++# CONFIG_BLK_DEV_NBD is not set ++CONFIG_BLK_DEV_RAM=y ++CONFIG_BLK_DEV_RAM_COUNT=16 ++CONFIG_BLK_DEV_RAM_SIZE=64000 ++# CONFIG_BLK_DEV_XIP is not set ++# CONFIG_CDROM_PKTCDVD is not set ++# CONFIG_ATA_OVER_ETH is not set ++CONFIG_MISC_DEVICES=y ++# CONFIG_COLDFIRE_SEC is not set ++# CONFIG_EEPROM_93CX6 is not set ++# CONFIG_ENCLOSURE_SERVICES is not set ++CONFIG_HAVE_IDE=y ++# CONFIG_IDE is not set ++ ++# ++# SCSI device support ++# ++# CONFIG_RAID_ATTRS is not set ++CONFIG_SCSI=y ++CONFIG_SCSI_DMA=y ++# CONFIG_SCSI_TGT is not set ++# CONFIG_SCSI_NETLINK is not set ++CONFIG_SCSI_PROC_FS=y ++ ++# ++# SCSI support type (disk, tape, CD-ROM) ++# ++CONFIG_BLK_DEV_SD=y ++# CONFIG_CHR_DEV_ST is not set ++# CONFIG_CHR_DEV_OSST is not set ++# CONFIG_BLK_DEV_SR is not set ++# CONFIG_CHR_DEV_SG is not set ++# CONFIG_CHR_DEV_SCH is not set ++ ++# ++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs ++# ++CONFIG_SCSI_MULTI_LUN=y ++# CONFIG_SCSI_CONSTANTS is not set ++# CONFIG_SCSI_LOGGING is not set ++# CONFIG_SCSI_SCAN_ASYNC is not set ++CONFIG_SCSI_WAIT_SCAN=m ++ ++# ++# SCSI Transports ++# ++# CONFIG_SCSI_SPI_ATTRS is not set ++# CONFIG_SCSI_FC_ATTRS is not set ++# CONFIG_SCSI_ISCSI_ATTRS is not set ++# CONFIG_SCSI_SAS_LIBSAS is not set ++# CONFIG_SCSI_SRP_ATTRS is not set ++CONFIG_SCSI_LOWLEVEL=y ++# CONFIG_ISCSI_TCP is not set ++# CONFIG_SCSI_DEBUG is not set ++# CONFIG_ATA is not set ++# CONFIG_MD is not set ++CONFIG_NETDEVICES=y ++# CONFIG_NETDEVICES_MULTIQUEUE is not set ++# CONFIG_DUMMY is not set ++# CONFIG_BONDING is not set ++# CONFIG_MACVLAN is not set ++# CONFIG_EQUALIZER is not set ++# CONFIG_TUN is not set ++# CONFIG_VETH is not set ++# CONFIG_PHYLIB is not set ++CONFIG_NET_ETHERNET=y ++CONFIG_MII=y ++# CONFIG_IBM_NEW_EMAC_ZMII is not set ++# CONFIG_IBM_NEW_EMAC_RGMII is not set ++# CONFIG_IBM_NEW_EMAC_TAH is not set ++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set ++# CONFIG_B44 is not set ++CONFIG_FEC=y ++# CONFIG_FEC2 is not set ++# CONFIG_NETDEV_1000 is not set ++# CONFIG_NETDEV_10000 is not set ++ ++# ++# Wireless LAN ++# ++# CONFIG_WLAN_PRE80211 is not set ++# CONFIG_WLAN_80211 is not set ++# CONFIG_WAN is not set ++# CONFIG_PPP is not set ++# CONFIG_SLIP is not set ++# CONFIG_NETCONSOLE is not set ++# CONFIG_NETPOLL is not set ++# CONFIG_NET_POLL_CONTROLLER is not set ++# CONFIG_ISDN is not set ++# CONFIG_PHONE is not set ++ ++# ++# Input device support ++# ++CONFIG_INPUT=y ++# CONFIG_INPUT_FF_MEMLESS is not set ++# CONFIG_INPUT_POLLDEV is not set ++ ++# ++# Userland interfaces ++# ++CONFIG_INPUT_MOUSEDEV=y ++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set ++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 ++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 ++# CONFIG_INPUT_JOYDEV is not set ++CONFIG_INPUT_EVDEV=y ++# CONFIG_INPUT_EVBUG is not set ++ ++# ++# Input Device Drivers ++# ++CONFIG_INPUT_KEYBOARD=y ++# CONFIG_KEYBOARD_ATKBD is not set ++# CONFIG_KEYBOARD_SUNKBD is not set ++# CONFIG_KEYBOARD_LKKBD is not set ++# CONFIG_KEYBOARD_XTKBD is not set ++# CONFIG_KEYBOARD_NEWTON is not set ++# CONFIG_KEYBOARD_STOWAWAY is not set ++# CONFIG_INPUT_MOUSE is not set ++# CONFIG_INPUT_JOYSTICK is not set ++# CONFIG_INPUT_TABLET is not set ++# CONFIG_INPUT_TOUCHSCREEN is not set ++# CONFIG_INPUT_MISC is not set ++ ++# ++# Hardware I/O ports ++# ++CONFIG_SERIO=y ++CONFIG_SERIO_SERPORT=y ++# CONFIG_SERIO_RAW is not set ++# CONFIG_GAMEPORT is not set ++ ++# ++# Character devices ++# ++CONFIG_VT=y ++CONFIG_VT_CONSOLE=y ++CONFIG_HW_CONSOLE=y ++# CONFIG_VT_HW_CONSOLE_BINDING is not set ++# CONFIG_SERIAL_NONSTANDARD is not set ++ ++# ++# Serial drivers ++# ++# CONFIG_SERIAL_8250 is not set ++ ++# ++# Non-8250 serial port support ++# ++CONFIG_SERIAL_COLDFIRE=y ++# CONFIG_SERIAL_MCF is not set ++CONFIG_UNIX98_PTYS=y ++# CONFIG_LEGACY_PTYS is not set ++# CONFIG_IPMI_HANDLER is not set ++# CONFIG_HW_RANDOM is not set ++# CONFIG_GEN_RTC is not set ++# CONFIG_R3964 is not set ++# CONFIG_RAW_DRIVER is not set ++# CONFIG_TCG_TPM is not set ++CONFIG_I2C=y ++CONFIG_I2C_BOARDINFO=y ++CONFIG_I2C_CHARDEV=y ++ ++# ++# I2C Algorithms ++# ++# CONFIG_I2C_ALGOBIT is not set ++# CONFIG_I2C_ALGOPCF is not set ++# CONFIG_I2C_ALGOPCA is not set ++ ++# ++# I2C Hardware Bus support ++# ++# CONFIG_I2C_MCF548x is not set ++CONFIG_I2C_MCF=y ++# CONFIG_I2C_OCORES is not set ++# CONFIG_I2C_PARPORT_LIGHT is not set ++# CONFIG_I2C_SIMTEC is not set ++# CONFIG_I2C_TAOS_EVM is not set ++# CONFIG_I2C_STUB is not set ++ ++# ++# Miscellaneous I2C Chip support ++# ++# CONFIG_DS1682 is not set ++# CONFIG_SENSORS_EEPROM is not set ++# CONFIG_SENSORS_PCF8574 is not set ++# CONFIG_PCF8575 is not set ++# CONFIG_SENSORS_PCF8591 is not set ++# CONFIG_TPS65010 is not set ++# CONFIG_SENSORS_MAX6875 is not set ++# CONFIG_SENSORS_TSL2550 is not set ++# CONFIG_I2C_DEBUG_CORE is not set ++# CONFIG_I2C_DEBUG_ALGO is not set ++# CONFIG_I2C_DEBUG_BUS is not set ++# CONFIG_I2C_DEBUG_CHIP is not set ++ ++# ++# SPI support ++# ++# CONFIG_SPI is not set ++# CONFIG_COLDFIRE_EDMA is not set ++# CONFIG_SPI_MASTER is not set ++# CONFIG_W1 is not set ++# CONFIG_POWER_SUPPLY is not set ++# CONFIG_HWMON is not set ++# CONFIG_THERMAL is not set ++# CONFIG_WATCHDOG is not set ++ ++# ++# Sonics Silicon Backplane ++# ++CONFIG_SSB_POSSIBLE=y ++# CONFIG_SSB is not set ++ ++# ++# Multifunction device drivers ++# ++# CONFIG_MFD_SM501 is not set ++ ++# ++# Multimedia devices ++# ++# CONFIG_VIDEO_DEV is not set ++# CONFIG_DVB_CORE is not set ++CONFIG_DAB=y ++ ++# ++# Graphics support ++# ++# CONFIG_VGASTATE is not set ++CONFIG_VIDEO_OUTPUT_CONTROL=m ++# CONFIG_FB is not set ++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set ++ ++# ++# Display device support ++# ++# CONFIG_DISPLAY_SUPPORT is not set ++ ++# ++# Console display driver support ++# ++CONFIG_DUMMY_CONSOLE=y ++ ++# ++# Sound ++# ++# CONFIG_SOUND is not set ++# CONFIG_HID_SUPPORT is not set ++# CONFIG_USB_SUPPORT is not set ++# CONFIG_MMC is not set ++# CONFIG_MEMSTICK is not set ++# CONFIG_NEW_LEDS is not set ++# CONFIG_RTC_CLASS is not set ++ ++# ++# Userspace I/O ++# ++# CONFIG_UIO is not set ++ ++# ++# Character devices ++# ++# CONFIG_SERIAL_CONSOLE is not set ++ ++# ++# File systems ++# ++CONFIG_EXT2_FS=y ++# CONFIG_EXT2_FS_XATTR is not set ++# CONFIG_EXT2_FS_XIP is not set ++CONFIG_EXT3_FS=y ++CONFIG_EXT3_FS_XATTR=y ++# CONFIG_EXT3_FS_POSIX_ACL is not set ++# CONFIG_EXT3_FS_SECURITY is not set ++# CONFIG_EXT4DEV_FS is not set ++CONFIG_JBD=y ++CONFIG_FS_MBCACHE=y ++# CONFIG_REISERFS_FS is not set ++# CONFIG_JFS_FS is not set ++# CONFIG_FS_POSIX_ACL is not set ++# CONFIG_XFS_FS is not set ++# CONFIG_GFS2_FS is not set ++# CONFIG_OCFS2_FS is not set ++CONFIG_DNOTIFY=y ++# CONFIG_INOTIFY is not set ++# CONFIG_QUOTA is not set ++# CONFIG_AUTOFS_FS is not set ++# CONFIG_AUTOFS4_FS is not set ++# CONFIG_FUSE_FS is not set ++ ++# ++# CD-ROM/DVD Filesystems ++# ++# CONFIG_ISO9660_FS is not set ++# CONFIG_UDF_FS is not set ++ ++# ++# DOS/FAT/NT Filesystems ++# ++CONFIG_FAT_FS=y ++CONFIG_MSDOS_FS=y ++CONFIG_VFAT_FS=y ++CONFIG_FAT_DEFAULT_CODEPAGE=437 ++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" ++CONFIG_NTFS_FS=y ++# CONFIG_NTFS_DEBUG is not set ++CONFIG_NTFS_RW=y ++ ++# ++# Pseudo filesystems ++# ++CONFIG_PROC_FS=y ++# CONFIG_PROC_KCORE is not set ++CONFIG_PROC_SYSCTL=y ++CONFIG_SYSFS=y ++CONFIG_TMPFS=y ++# CONFIG_TMPFS_POSIX_ACL is not set ++# CONFIG_HUGETLB_PAGE is not set ++# CONFIG_CONFIGFS_FS is not set ++ ++# ++# Miscellaneous filesystems ++# ++# CONFIG_ADFS_FS is not set ++# CONFIG_AFFS_FS is not set ++# CONFIG_HFS_FS is not set ++# CONFIG_HFSPLUS_FS is not set ++# CONFIG_BEFS_FS is not set ++# CONFIG_BFS_FS is not set ++# CONFIG_EFS_FS is not set ++# CONFIG_CRAMFS is not set ++# CONFIG_VXFS_FS is not set ++CONFIG_MINIX_FS=y ++# CONFIG_HPFS_FS is not set ++# CONFIG_QNX4FS_FS is not set ++# CONFIG_ROMFS_FS is not set ++# CONFIG_SYSV_FS is not set ++# CONFIG_UFS_FS is not set ++CONFIG_NETWORK_FILESYSTEMS=y ++CONFIG_NFS_FS=y ++# CONFIG_NFS_V3 is not set ++# CONFIG_NFS_V4 is not set ++# CONFIG_NFS_DIRECTIO is not set ++# CONFIG_NFSD is not set ++CONFIG_ROOT_NFS=y ++CONFIG_LOCKD=y ++CONFIG_NFS_COMMON=y ++CONFIG_SUNRPC=y ++# CONFIG_SUNRPC_BIND34 is not set ++# CONFIG_RPCSEC_GSS_KRB5 is not set ++# CONFIG_RPCSEC_GSS_SPKM3 is not set ++# CONFIG_SMB_FS is not set ++# CONFIG_CIFS is not set ++# CONFIG_NCP_FS is not set ++# CONFIG_CODA_FS is not set ++# CONFIG_AFS_FS is not set ++ ++# ++# Partition Types ++# ++CONFIG_PARTITION_ADVANCED=y ++# CONFIG_ACORN_PARTITION is not set ++# CONFIG_OSF_PARTITION is not set ++# CONFIG_AMIGA_PARTITION is not set ++# CONFIG_ATARI_PARTITION is not set ++# CONFIG_MAC_PARTITION is not set ++CONFIG_MSDOS_PARTITION=y ++# CONFIG_BSD_DISKLABEL is not set ++# CONFIG_MINIX_SUBPARTITION is not set ++# CONFIG_SOLARIS_X86_PARTITION is not set ++# CONFIG_UNIXWARE_DISKLABEL is not set ++# CONFIG_LDM_PARTITION is not set ++# CONFIG_SGI_PARTITION is not set ++# CONFIG_ULTRIX_PARTITION is not set ++# CONFIG_SUN_PARTITION is not set ++# CONFIG_KARMA_PARTITION is not set ++# CONFIG_EFI_PARTITION is not set ++# CONFIG_SYSV68_PARTITION is not set ++CONFIG_NLS=y ++CONFIG_NLS_DEFAULT="iso8859-1" ++CONFIG_NLS_CODEPAGE_437=y ++# CONFIG_NLS_CODEPAGE_737 is not set ++# CONFIG_NLS_CODEPAGE_775 is not set ++# CONFIG_NLS_CODEPAGE_850 is not set ++# CONFIG_NLS_CODEPAGE_852 is not set ++# CONFIG_NLS_CODEPAGE_855 is not set ++# CONFIG_NLS_CODEPAGE_857 is not set ++# CONFIG_NLS_CODEPAGE_860 is not set ++# CONFIG_NLS_CODEPAGE_861 is not set ++# CONFIG_NLS_CODEPAGE_862 is not set ++# CONFIG_NLS_CODEPAGE_863 is not set ++# CONFIG_NLS_CODEPAGE_864 is not set ++# CONFIG_NLS_CODEPAGE_865 is not set ++# CONFIG_NLS_CODEPAGE_866 is not set ++# CONFIG_NLS_CODEPAGE_869 is not set ++# CONFIG_NLS_CODEPAGE_936 is not set ++# CONFIG_NLS_CODEPAGE_950 is not set ++# CONFIG_NLS_CODEPAGE_932 is not set ++# CONFIG_NLS_CODEPAGE_949 is not set ++# CONFIG_NLS_CODEPAGE_874 is not set ++# CONFIG_NLS_ISO8859_8 is not set ++# CONFIG_NLS_CODEPAGE_1250 is not set ++# CONFIG_NLS_CODEPAGE_1251 is not set ++# CONFIG_NLS_ASCII is not set ++CONFIG_NLS_ISO8859_1=y ++# CONFIG_NLS_ISO8859_2 is not set ++# CONFIG_NLS_ISO8859_3 is not set ++# CONFIG_NLS_ISO8859_4 is not set ++# CONFIG_NLS_ISO8859_5 is not set ++# CONFIG_NLS_ISO8859_6 is not set ++# CONFIG_NLS_ISO8859_7 is not set ++# CONFIG_NLS_ISO8859_9 is not set ++# CONFIG_NLS_ISO8859_13 is not set ++# CONFIG_NLS_ISO8859_14 is not set ++# CONFIG_NLS_ISO8859_15 is not set ++# CONFIG_NLS_KOI8_R is not set ++# CONFIG_NLS_KOI8_U is not set ++CONFIG_NLS_UTF8=y ++# CONFIG_DLM is not set ++ ++# ++# Kernel hacking ++# ++# CONFIG_PRINTK_TIME is not set ++CONFIG_ENABLE_WARN_DEPRECATED=y ++# CONFIG_ENABLE_MUST_CHECK is not set ++# CONFIG_MAGIC_SYSRQ is not set ++# CONFIG_UNUSED_SYMBOLS is not set ++# CONFIG_DEBUG_FS is not set ++# CONFIG_HEADERS_CHECK is not set ++CONFIG_DEBUG_KERNEL=y ++CONFIG_DETECT_SOFTLOCKUP=y ++CONFIG_SCHED_DEBUG=y ++# CONFIG_SCHEDSTATS is not set ++# CONFIG_TIMER_STATS is not set ++CONFIG_DEBUG_SLAB=y ++# CONFIG_DEBUG_SLAB_LEAK is not set ++# CONFIG_DEBUG_RT_MUTEXES is not set ++# CONFIG_RT_MUTEX_TESTER is not set ++# CONFIG_DEBUG_SPINLOCK is not set ++# CONFIG_DEBUG_MUTEXES is not set ++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set ++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set ++# CONFIG_DEBUG_KOBJECT is not set ++CONFIG_DEBUG_BUGVERBOSE=y ++CONFIG_DEBUG_INFO=y ++# CONFIG_DEBUG_VM is not set ++# CONFIG_DEBUG_LIST is not set ++# CONFIG_DEBUG_SG is not set ++# CONFIG_FRAME_POINTER is not set ++# CONFIG_BOOT_PRINTK_DELAY is not set ++# CONFIG_RCU_TORTURE_TEST is not set ++# CONFIG_BACKTRACE_SELF_TEST is not set ++# CONFIG_FAULT_INJECTION is not set ++# CONFIG_SAMPLES is not set ++CONFIG_BOOTPARAM=y ++CONFIG_BOOTPARAM_STRING="root=/dev/nfs rw nfsroot=172.27.155.1:/tftpboot/redstripe ip=172.27.155.55:172.27.155.1:172.27.255.254:255.255.0.0::eth0:off mtdparts=phys_mapped_flash:16m(User)" ++ ++# ++# Security options ++# ++# CONFIG_KEYS is not set ++# CONFIG_SECURITY is not set ++# CONFIG_SECURITY_FILE_CAPABILITIES is not set ++CONFIG_CRYPTO=y ++CONFIG_CRYPTO_ALGAPI=y ++CONFIG_CRYPTO_AEAD=y ++CONFIG_CRYPTO_BLKCIPHER=y ++# CONFIG_CRYPTO_SEQIV is not set ++CONFIG_CRYPTO_HASH=y ++CONFIG_CRYPTO_MANAGER=y ++CONFIG_CRYPTO_HMAC=y ++# CONFIG_CRYPTO_XCBC is not set ++# CONFIG_CRYPTO_NULL is not set ++# CONFIG_CRYPTO_MD4 is not set ++CONFIG_CRYPTO_MD5=y ++CONFIG_CRYPTO_SHA1=y ++# CONFIG_CRYPTO_SHA256 is not set ++# CONFIG_CRYPTO_SHA512 is not set ++# CONFIG_CRYPTO_WP512 is not set ++# CONFIG_CRYPTO_TGR192 is not set ++# CONFIG_CRYPTO_GF128MUL is not set ++CONFIG_CRYPTO_ECB=y ++CONFIG_CRYPTO_CBC=y ++CONFIG_CRYPTO_PCBC=m ++# CONFIG_CRYPTO_LRW is not set ++# CONFIG_CRYPTO_XTS is not set ++# CONFIG_CRYPTO_CTR is not set ++# CONFIG_CRYPTO_GCM is not set ++# CONFIG_CRYPTO_CCM is not set ++# CONFIG_CRYPTO_CRYPTD is not set ++CONFIG_CRYPTO_DES=y ++# CONFIG_CRYPTO_FCRYPT is not set ++# CONFIG_CRYPTO_BLOWFISH is not set ++# CONFIG_CRYPTO_TWOFISH is not set ++# CONFIG_CRYPTO_SERPENT is not set ++# CONFIG_CRYPTO_AES is not set ++# CONFIG_CRYPTO_CAST5 is not set ++# CONFIG_CRYPTO_CAST6 is not set ++# CONFIG_CRYPTO_TEA is not set ++# CONFIG_CRYPTO_ARC4 is not set ++# CONFIG_CRYPTO_KHAZAD is not set ++# CONFIG_CRYPTO_ANUBIS is not set ++# CONFIG_CRYPTO_SEED is not set ++# CONFIG_CRYPTO_SALSA20 is not set ++# CONFIG_CRYPTO_DEFLATE is not set ++# CONFIG_CRYPTO_MICHAEL_MIC is not set ++# CONFIG_CRYPTO_CRC32C is not set ++# CONFIG_CRYPTO_CAMELLIA is not set ++CONFIG_CRYPTO_TEST=m ++CONFIG_CRYPTO_AUTHENC=y ++# CONFIG_CRYPTO_LZO is not set ++CONFIG_CRYPTO_HW=y ++# CONFIG_CRYPTO_DEV_MCFCAU is not set ++ ++# ++# Library routines ++# ++CONFIG_BITREVERSE=y ++CONFIG_CRC_CCITT=y ++CONFIG_CRC16=y ++# CONFIG_CRC_ITU_T is not set ++CONFIG_CRC32=y ++# CONFIG_CRC7 is not set ++CONFIG_LIBCRC32C=y ++CONFIG_PLIST=y ++CONFIG_HAS_IOMEM=y ++CONFIG_HAS_IOPORT=y ++CONFIG_HAS_DMA=y +--- /dev/null ++++ b/arch/m68k/configs/m54455evb_defconfig +@@ -0,0 +1,1037 @@ ++# ++# Automatically generated make config: don't edit ++# Linux kernel version: 2.6.23 ++# Thu Dec 6 12:14:18 2007 ++# ++CONFIG_M68K=y ++CONFIG_MMU=y ++CONFIG_RWSEM_GENERIC_SPINLOCK=y ++# CONFIG_ARCH_HAS_ILOG2_U32 is not set ++# CONFIG_ARCH_HAS_ILOG2_U64 is not set ++CONFIG_GENERIC_HWEIGHT=y ++CONFIG_GENERIC_CALIBRATE_DELAY=y ++CONFIG_TIME_LOW_RES=y ++CONFIG_GENERIC_IOMAP=y ++CONFIG_NO_IOPORT=y ++# CONFIG_NO_DMA is not set ++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" ++ ++# ++# General setup ++# ++CONFIG_EXPERIMENTAL=y ++CONFIG_BROKEN_ON_SMP=y ++CONFIG_INIT_ENV_ARG_LIMIT=32 ++CONFIG_LOCALVERSION="" ++CONFIG_LOCALVERSION_AUTO=y ++CONFIG_SWAP=y ++CONFIG_SYSVIPC=y ++CONFIG_SYSVIPC_SYSCTL=y ++# CONFIG_POSIX_MQUEUE is not set ++# CONFIG_BSD_PROCESS_ACCT is not set ++# CONFIG_TASKSTATS is not set ++# CONFIG_USER_NS is not set ++# CONFIG_AUDIT is not set ++CONFIG_IKCONFIG=y ++CONFIG_IKCONFIG_PROC=y ++CONFIG_LOG_BUF_SHIFT=17 ++CONFIG_SYSFS_DEPRECATED=y ++# CONFIG_RELAY is not set ++# CONFIG_BLK_DEV_INITRD is not set ++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set ++CONFIG_SYSCTL=y ++# CONFIG_EMBEDDED is not set ++CONFIG_UID16=y ++CONFIG_SYSCTL_SYSCALL=y ++CONFIG_KALLSYMS=y ++# CONFIG_KALLSYMS_ALL is not set ++# CONFIG_KALLSYMS_EXTRA_PASS is not set ++CONFIG_HOTPLUG=y ++CONFIG_PRINTK=y ++CONFIG_BUG=y ++CONFIG_ELF_CORE=y ++CONFIG_BASE_FULL=y ++CONFIG_FUTEX=y ++CONFIG_ANON_INODES=y ++CONFIG_EPOLL=y ++CONFIG_SIGNALFD=y ++CONFIG_EVENTFD=y ++CONFIG_SHMEM=y ++CONFIG_VM_EVENT_COUNTERS=y ++CONFIG_SLAB=y ++# CONFIG_SLUB is not set ++# CONFIG_SLOB is not set ++CONFIG_RT_MUTEXES=y ++# CONFIG_TINY_SHMEM is not set ++CONFIG_BASE_SMALL=0 ++CONFIG_MODULES=y ++CONFIG_MODULE_UNLOAD=y ++CONFIG_MODULE_FORCE_UNLOAD=y ++# CONFIG_MODVERSIONS is not set ++# CONFIG_MODULE_SRCVERSION_ALL is not set ++# CONFIG_KMOD is not set ++CONFIG_BLOCK=y ++CONFIG_LBD=y ++# CONFIG_BLK_DEV_IO_TRACE is not set ++# CONFIG_LSF is not set ++# CONFIG_BLK_DEV_BSG is not set ++ ++# ++# IO Schedulers ++# ++CONFIG_IOSCHED_NOOP=y ++CONFIG_IOSCHED_AS=y ++CONFIG_IOSCHED_DEADLINE=y ++CONFIG_IOSCHED_CFQ=y ++# CONFIG_DEFAULT_AS is not set ++# CONFIG_DEFAULT_DEADLINE is not set ++CONFIG_DEFAULT_CFQ=y ++# CONFIG_DEFAULT_NOOP is not set ++CONFIG_DEFAULT_IOSCHED="cfq" ++ ++# ++# Platform dependent setup ++# ++# CONFIG_SUN3 is not set ++CONFIG_COLDFIRE=y ++CONFIG_CFV4E=y ++# CONFIG_AMIGA is not set ++# CONFIG_ATARI is not set ++# CONFIG_MAC is not set ++# CONFIG_APOLLO is not set ++# CONFIG_VME is not set ++# CONFIG_HP300 is not set ++# CONFIG_SUN3X is not set ++# CONFIG_Q40 is not set ++ ++# ++# Processor type ++# ++# CONFIG_M68020 is not set ++# CONFIG_M68030 is not set ++# CONFIG_M68040 is not set ++# CONFIG_M68060 is not set ++CONFIG_M54455=y ++CONFIG_MCFCLK=266666666 ++# CONFIG_MCF_USER_HALT is not set ++CONFIG_MMU_CFV4E=y ++CONFIG_SDRAM_BASE=0x40000000 ++CONFIG_SDRAM_SIZE=0x0FFFFFFF ++CONFIG_NOR_FLASH_BASE=0x00000000 ++# CONFIG_M68KFPU_EMU is not set ++CONFIG_ADVANCED=y ++# CONFIG_RMW_INSNS is not set ++CONFIG_SINGLE_MEMORY_CHUNK=y ++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set ++CONFIG_SELECT_MEMORY_MODEL=y ++CONFIG_FLATMEM_MANUAL=y ++# CONFIG_DISCONTIGMEM_MANUAL is not set ++# CONFIG_SPARSEMEM_MANUAL is not set ++CONFIG_FLATMEM=y ++CONFIG_FLAT_NODE_MEM_MAP=y ++CONFIG_NEED_MULTIPLE_NODES=y ++# CONFIG_SPARSEMEM_STATIC is not set ++CONFIG_SPLIT_PTLOCK_CPUS=4 ++# CONFIG_RESOURCES_64BIT is not set ++CONFIG_ZONE_DMA_FLAG=1 ++CONFIG_BOUNCE=y ++CONFIG_VIRT_TO_BUS=y ++ ++# ++# General setup ++# ++CONFIG_BINFMT_ELF=y ++# CONFIG_BINFMT_AOUT is not set ++# CONFIG_BINFMT_MISC is not set ++CONFIG_PROC_HARDWARE=y ++CONFIG_ZONE_DMA=y ++# CONFIG_ARCH_SUPPORTS_MSI is not set ++ ++# ++# Power management options ++# ++# CONFIG_PM is not set ++ ++# ++# Networking ++# ++CONFIG_NET=y ++ ++# ++# Networking options ++# ++CONFIG_PACKET=y ++# CONFIG_PACKET_MMAP is not set ++CONFIG_UNIX=y ++CONFIG_XFRM=y ++# CONFIG_XFRM_USER is not set ++# CONFIG_XFRM_SUB_POLICY is not set ++# CONFIG_XFRM_MIGRATE is not set ++CONFIG_NET_KEY=y ++# CONFIG_NET_KEY_MIGRATE is not set ++CONFIG_INET=y ++# CONFIG_IP_MULTICAST is not set ++CONFIG_IP_ADVANCED_ROUTER=y ++CONFIG_ASK_IP_FIB_HASH=y ++# CONFIG_IP_FIB_TRIE is not set ++CONFIG_IP_FIB_HASH=y ++# CONFIG_IP_MULTIPLE_TABLES is not set ++# CONFIG_IP_ROUTE_MULTIPATH is not set ++# CONFIG_IP_ROUTE_VERBOSE is not set ++CONFIG_IP_PNP=y ++# CONFIG_IP_PNP_DHCP is not set ++# CONFIG_IP_PNP_BOOTP is not set ++# CONFIG_IP_PNP_RARP is not set ++# CONFIG_NET_IPIP is not set ++# CONFIG_NET_IPGRE is not set ++# CONFIG_ARPD is not set ++# CONFIG_SYN_COOKIES is not set ++CONFIG_INET_AH=y ++CONFIG_INET_ESP=y ++# CONFIG_INET_IPCOMP is not set ++# CONFIG_INET_XFRM_TUNNEL is not set ++# CONFIG_INET_TUNNEL is not set ++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set ++# CONFIG_INET_XFRM_MODE_TUNNEL is not set ++# CONFIG_INET_XFRM_MODE_BEET is not set ++CONFIG_INET_DIAG=y ++CONFIG_INET_TCP_DIAG=y ++# CONFIG_TCP_CONG_ADVANCED is not set ++CONFIG_TCP_CONG_CUBIC=y ++CONFIG_DEFAULT_TCP_CONG="cubic" ++# CONFIG_TCP_MD5SIG is not set ++# CONFIG_IPV6 is not set ++# CONFIG_INET6_XFRM_TUNNEL is not set ++# CONFIG_INET6_TUNNEL is not set ++# CONFIG_NETWORK_SECMARK is not set ++# CONFIG_NETFILTER is not set ++# CONFIG_IP_DCCP is not set ++# CONFIG_IP_SCTP is not set ++# CONFIG_TIPC is not set ++# CONFIG_ATM is not set ++# CONFIG_BRIDGE is not set ++# CONFIG_VLAN_8021Q is not set ++# CONFIG_DECNET is not set ++# CONFIG_LLC2 is not set ++# CONFIG_IPX is not set ++# CONFIG_ATALK is not set ++# CONFIG_X25 is not set ++# CONFIG_LAPB is not set ++# CONFIG_ECONET is not set ++# CONFIG_WAN_ROUTER is not set ++ ++# ++# QoS and/or fair queueing ++# ++# CONFIG_NET_SCHED is not set ++ ++# ++# Network testing ++# ++# CONFIG_NET_PKTGEN is not set ++# CONFIG_HAMRADIO is not set ++# CONFIG_IRDA is not set ++# CONFIG_BT is not set ++# CONFIG_AF_RXRPC is not set ++ ++# ++# Wireless ++# ++# CONFIG_CFG80211 is not set ++# CONFIG_WIRELESS_EXT is not set ++# CONFIG_MAC80211 is not set ++# CONFIG_IEEE80211 is not set ++# CONFIG_RFKILL is not set ++# CONFIG_NET_9P is not set ++ ++# ++# Device Drivers ++# ++ ++# ++# Generic Driver Options ++# ++# CONFIG_STANDALONE is not set ++CONFIG_PREVENT_FIRMWARE_BUILD=y ++CONFIG_FW_LOADER=y ++# CONFIG_DEBUG_DRIVER is not set ++# CONFIG_DEBUG_DEVRES is not set ++# CONFIG_SYS_HYPERVISOR is not set ++# CONFIG_CONNECTOR is not set ++CONFIG_MTD=y ++CONFIG_MTD_DEBUG=y ++CONFIG_MTD_DEBUG_VERBOSE=0 ++CONFIG_MTD_CONCAT=y ++CONFIG_MTD_PARTITIONS=y ++# CONFIG_MTD_REDBOOT_PARTS is not set ++CONFIG_MTD_CMDLINE_PARTS=y ++ ++# ++# User Modules And Translation Layers ++# ++CONFIG_MTD_CHAR=y ++CONFIG_MTD_BLKDEVS=y ++CONFIG_MTD_BLOCK=y ++# CONFIG_FTL is not set ++# CONFIG_NFTL is not set ++# CONFIG_INFTL is not set ++# CONFIG_RFD_FTL is not set ++# CONFIG_SSFDC is not set ++ ++# ++# RAM/ROM/Flash chip drivers ++# ++CONFIG_MTD_CFI=y ++# CONFIG_MTD_JEDECPROBE is not set ++CONFIG_MTD_GEN_PROBE=y ++CONFIG_MTD_CFI_ADV_OPTIONS=y ++CONFIG_MTD_CFI_NOSWAP=y ++# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set ++# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set ++CONFIG_MTD_CFI_GEOMETRY=y ++CONFIG_MTD_MAP_BANK_WIDTH_1=y ++# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set ++CONFIG_MTD_CFI_I1=y ++# CONFIG_MTD_CFI_I2 is not set ++# CONFIG_MTD_CFI_I4 is not set ++# CONFIG_MTD_CFI_I8 is not set ++# CONFIG_MTD_OTP is not set ++CONFIG_MTD_CFI_INTELEXT=y ++# CONFIG_MTD_CFI_AMDSTD is not set ++# CONFIG_MTD_CFI_STAA is not set ++CONFIG_MTD_CFI_UTIL=y ++# CONFIG_MTD_RAM is not set ++# CONFIG_MTD_ROM is not set ++# CONFIG_MTD_ABSENT is not set ++ ++# ++# Mapping drivers for chip access ++# ++# CONFIG_MTD_COMPLEX_MAPPINGS is not set ++CONFIG_MTD_PHYSMAP=y ++CONFIG_MTD_PHYSMAP_START=0x00000000 ++CONFIG_MTD_PHYSMAP_LEN=0x1000000 ++CONFIG_MTD_PHYSMAP_BANKWIDTH=1 ++# CONFIG_MTD_PLATRAM is not set ++ ++# ++# Self-contained MTD device drivers ++# ++# CONFIG_MTD_DATAFLASH is not set ++# CONFIG_MTD_M25P80 is not set ++# CONFIG_MTD_SLRAM is not set ++# CONFIG_MTD_PHRAM is not set ++# CONFIG_MTD_MTDRAM is not set ++# CONFIG_MTD_BLOCK2MTD is not set ++ ++# ++# Disk-On-Chip Device Drivers ++# ++# CONFIG_MTD_DOC2000 is not set ++# CONFIG_MTD_DOC2001 is not set ++# CONFIG_MTD_DOC2001PLUS is not set ++# CONFIG_MTD_NAND is not set ++# CONFIG_MTD_ONENAND is not set ++ ++# ++# UBI - Unsorted block images ++# ++# CONFIG_MTD_UBI is not set ++# CONFIG_PARPORT is not set ++CONFIG_BLK_DEV=y ++# CONFIG_BLK_DEV_COW_COMMON is not set ++CONFIG_BLK_DEV_LOOP=y ++# CONFIG_BLK_DEV_CRYPTOLOOP is not set ++# CONFIG_BLK_DEV_NBD is not set ++# CONFIG_BLK_DEV_UB is not set ++CONFIG_BLK_DEV_RAM=y ++CONFIG_BLK_DEV_RAM_COUNT=16 ++CONFIG_BLK_DEV_RAM_SIZE=64000 ++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 ++# CONFIG_CDROM_PKTCDVD is not set ++# CONFIG_ATA_OVER_ETH is not set ++CONFIG_MISC_DEVICES=y ++# CONFIG_EEPROM_93CX6 is not set ++# CONFIG_IDE is not set ++ ++# ++# SCSI device support ++# ++# CONFIG_RAID_ATTRS is not set ++CONFIG_SCSI=y ++CONFIG_SCSI_DMA=y ++# CONFIG_SCSI_TGT is not set ++# CONFIG_SCSI_NETLINK is not set ++CONFIG_SCSI_PROC_FS=y ++ ++# ++# SCSI support type (disk, tape, CD-ROM) ++# ++CONFIG_BLK_DEV_SD=y ++# CONFIG_CHR_DEV_ST is not set ++# CONFIG_CHR_DEV_OSST is not set ++# CONFIG_BLK_DEV_SR is not set ++# CONFIG_CHR_DEV_SG is not set ++# CONFIG_CHR_DEV_SCH is not set ++ ++# ++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs ++# ++CONFIG_SCSI_MULTI_LUN=y ++# CONFIG_SCSI_CONSTANTS is not set ++# CONFIG_SCSI_LOGGING is not set ++# CONFIG_SCSI_SCAN_ASYNC is not set ++CONFIG_SCSI_WAIT_SCAN=m ++ ++# ++# SCSI Transports ++# ++# CONFIG_SCSI_SPI_ATTRS is not set ++# CONFIG_SCSI_FC_ATTRS is not set ++# CONFIG_SCSI_ISCSI_ATTRS is not set ++# CONFIG_SCSI_SAS_LIBSAS is not set ++CONFIG_SCSI_LOWLEVEL=y ++# CONFIG_ISCSI_TCP is not set ++# CONFIG_SCSI_DEBUG is not set ++CONFIG_ATA=m ++# CONFIG_ATA_NONSTANDARD is not set ++CONFIG_PATA_FSL=m ++# CONFIG_MD is not set ++CONFIG_NETDEVICES=y ++# CONFIG_NETDEVICES_MULTIQUEUE is not set ++# CONFIG_DUMMY is not set ++# CONFIG_BONDING is not set ++# CONFIG_MACVLAN is not set ++# CONFIG_EQUALIZER is not set ++# CONFIG_TUN is not set ++# CONFIG_PHYLIB is not set ++CONFIG_NET_ETHERNET=y ++CONFIG_MII=y ++CONFIG_FEC=y ++# CONFIG_FEC2 is not set ++CONFIG_NETDEV_1000=y ++CONFIG_NETDEV_10000=y ++ ++# ++# Wireless LAN ++# ++# CONFIG_WLAN_PRE80211 is not set ++# CONFIG_WLAN_80211 is not set ++ ++# ++# USB Network Adapters ++# ++# CONFIG_USB_CATC is not set ++# CONFIG_USB_KAWETH is not set ++CONFIG_USB_PEGASUS=m ++CONFIG_USB_RTL8150=m ++CONFIG_USB_USBNET_MII=m ++CONFIG_USB_USBNET=m ++CONFIG_USB_NET_AX8817X=m ++CONFIG_USB_NET_CDCETHER=m ++# CONFIG_USB_NET_DM9601 is not set ++# CONFIG_USB_NET_GL620A is not set ++# CONFIG_USB_NET_NET1080 is not set ++# CONFIG_USB_NET_PLUSB is not set ++# CONFIG_USB_NET_MCS7830 is not set ++# CONFIG_USB_NET_RNDIS_HOST is not set ++# CONFIG_USB_NET_CDC_SUBSET is not set ++# CONFIG_USB_NET_ZAURUS is not set ++# CONFIG_WAN is not set ++# CONFIG_PPP is not set ++# CONFIG_SLIP is not set ++# CONFIG_SHAPER is not set ++# CONFIG_NETCONSOLE is not set ++# CONFIG_NETPOLL is not set ++# CONFIG_NET_POLL_CONTROLLER is not set ++# CONFIG_ISDN is not set ++# CONFIG_PHONE is not set ++ ++# ++# Input device support ++# ++CONFIG_INPUT=y ++# CONFIG_INPUT_FF_MEMLESS is not set ++# CONFIG_INPUT_POLLDEV is not set ++ ++# ++# Userland interfaces ++# ++CONFIG_INPUT_MOUSEDEV=y ++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set ++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 ++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 ++# CONFIG_INPUT_JOYDEV is not set ++# CONFIG_INPUT_TSDEV is not set ++CONFIG_INPUT_EVDEV=y ++# CONFIG_INPUT_EVBUG is not set ++ ++# ++# Input Device Drivers ++# ++CONFIG_INPUT_KEYBOARD=y ++# CONFIG_KEYBOARD_ATKBD is not set ++# CONFIG_KEYBOARD_SUNKBD is not set ++# CONFIG_KEYBOARD_LKKBD is not set ++# CONFIG_KEYBOARD_XTKBD is not set ++# CONFIG_KEYBOARD_NEWTON is not set ++# CONFIG_KEYBOARD_STOWAWAY is not set ++# CONFIG_INPUT_MOUSE is not set ++# CONFIG_INPUT_JOYSTICK is not set ++# CONFIG_INPUT_TABLET is not set ++# CONFIG_INPUT_TOUCHSCREEN is not set ++# CONFIG_INPUT_MISC is not set ++ ++# ++# Hardware I/O ports ++# ++CONFIG_SERIO=y ++CONFIG_SERIO_SERPORT=y ++# CONFIG_SERIO_RAW is not set ++# CONFIG_GAMEPORT is not set ++ ++# ++# Character devices ++# ++CONFIG_VT=y ++CONFIG_VT_CONSOLE=y ++CONFIG_HW_CONSOLE=y ++# CONFIG_VT_HW_CONSOLE_BINDING is not set ++# CONFIG_SERIAL_NONSTANDARD is not set ++ ++# ++# Serial drivers ++# ++# CONFIG_SERIAL_8250 is not set ++ ++# ++# Non-8250 serial port support ++# ++CONFIG_SERIAL_COLDFIRE=y ++CONFIG_UNIX98_PTYS=y ++# CONFIG_LEGACY_PTYS is not set ++# CONFIG_IPMI_HANDLER is not set ++# CONFIG_WATCHDOG is not set ++# CONFIG_HW_RANDOM is not set ++# CONFIG_GEN_RTC is not set ++# CONFIG_R3964 is not set ++# CONFIG_RAW_DRIVER is not set ++# CONFIG_TCG_TPM is not set ++# CONFIG_I2C is not set ++ ++# ++# SPI support ++# ++CONFIG_SPI=y ++# CONFIG_SPI_DEBUG is not set ++CONFIG_COLDFIRE_EDMA=y ++CONFIG_SPI_MASTER=y ++ ++# ++# SPI Master Controller Drivers ++# ++# CONFIG_SPI_BITBANG is not set ++CONFIG_SPI_COLDFIRE=y ++CONFIG_SPI_COLDFIRE_DSPI_EDMA=y ++ ++# ++# SPI Protocol Masters ++# ++# CONFIG_SPI_AT25 is not set ++# CONFIG_SPI_SPIDEV is not set ++# CONFIG_SPI_TLE62X0 is not set ++CONFIG_SPI_COLDFIRE_SSI_AUDIO=y ++# CONFIG_SSIAUDIO_USE_EDMA is not set ++# CONFIG_W1 is not set ++# CONFIG_POWER_SUPPLY is not set ++# CONFIG_HWMON is not set ++ ++# ++# Multifunction device drivers ++# ++# CONFIG_MFD_SM501 is not set ++ ++# ++# Multimedia devices ++# ++# CONFIG_VIDEO_DEV is not set ++# CONFIG_DVB_CORE is not set ++CONFIG_DAB=y ++# CONFIG_USB_DABUSB is not set ++ ++# ++# Graphics support ++# ++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set ++ ++# ++# Display device support ++# ++# CONFIG_DISPLAY_SUPPORT is not set ++# CONFIG_VGASTATE is not set ++CONFIG_VIDEO_OUTPUT_CONTROL=m ++# CONFIG_FB is not set ++ ++# ++# Console display driver support ++# ++CONFIG_DUMMY_CONSOLE=y ++ ++# ++# Sound ++# ++# CONFIG_SOUND is not set ++CONFIG_HID_SUPPORT=y ++CONFIG_HID=y ++CONFIG_HID_DEBUG=y ++ ++# ++# USB Input Devices ++# ++CONFIG_USB_HID=y ++# CONFIG_USB_HIDINPUT_POWERBOOK is not set ++# CONFIG_HID_FF is not set ++# CONFIG_USB_HIDDEV is not set ++CONFIG_USB_SUPPORT=y ++CONFIG_USB_ARCH_HAS_HCD=y ++# CONFIG_USB_ARCH_HAS_OHCI is not set ++CONFIG_USB_ARCH_HAS_EHCI=y ++CONFIG_USB=y ++# CONFIG_USB_DEBUG is not set ++ ++# ++# Miscellaneous USB options ++# ++CONFIG_USB_DEVICEFS=y ++# CONFIG_USB_DEVICE_CLASS is not set ++# CONFIG_USB_DYNAMIC_MINORS is not set ++# CONFIG_USB_OTG is not set ++ ++# ++# USB Host Controller Drivers ++# ++CONFIG_USB_EHCI_HCD=m ++CONFIG_USB_EHCI_SPLIT_ISO=y ++CONFIG_USB_EHCI_ROOT_HUB_TT=y ++# CONFIG_USB_EHCI_TT_NEWSCHED is not set ++CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y ++CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y ++# CONFIG_USB_ISP116X_HCD is not set ++# CONFIG_USB_SL811_HCD is not set ++# CONFIG_USB_R8A66597_HCD is not set ++CONFIG_USB_M5445X_ULPI=y ++# CONFIG_USB_M5445X_FSLS is not set ++ ++# ++# USB Device Class drivers ++# ++# CONFIG_USB_ACM is not set ++# CONFIG_USB_PRINTER is not set ++ ++# ++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' ++# ++ ++# ++# may also be needed; see USB_STORAGE Help for more information ++# ++CONFIG_USB_STORAGE=y ++# CONFIG_USB_STORAGE_DEBUG is not set ++# CONFIG_USB_STORAGE_DATAFAB is not set ++# CONFIG_USB_STORAGE_FREECOM is not set ++# CONFIG_USB_STORAGE_DPCM is not set ++# CONFIG_USB_STORAGE_USBAT is not set ++# CONFIG_USB_STORAGE_SDDR09 is not set ++# CONFIG_USB_STORAGE_SDDR55 is not set ++# CONFIG_USB_STORAGE_JUMPSHOT is not set ++# CONFIG_USB_STORAGE_ALAUDA is not set ++# CONFIG_USB_STORAGE_ONETOUCH is not set ++# CONFIG_USB_STORAGE_KARMA is not set ++# CONFIG_USB_LIBUSUAL is not set ++ ++# ++# USB Imaging devices ++# ++# CONFIG_USB_MDC800 is not set ++# CONFIG_USB_MICROTEK is not set ++# CONFIG_USB_MON is not set ++ ++# ++# USB port drivers ++# ++ ++# ++# USB Serial Converter support ++# ++# CONFIG_USB_SERIAL is not set ++ ++# ++# USB Miscellaneous drivers ++# ++# CONFIG_USB_EMI62 is not set ++# CONFIG_USB_EMI26 is not set ++# CONFIG_USB_ADUTUX is not set ++# CONFIG_USB_AUERSWALD is not set ++# CONFIG_USB_RIO500 is not set ++# CONFIG_USB_LEGOTOWER is not set ++# CONFIG_USB_LCD is not set ++# CONFIG_USB_BERRY_CHARGE is not set ++# CONFIG_USB_LED is not set ++# CONFIG_USB_CYPRESS_CY7C63 is not set ++# CONFIG_USB_CYTHERM is not set ++# CONFIG_USB_PHIDGET is not set ++# CONFIG_USB_IDMOUSE is not set ++# CONFIG_USB_FTDI_ELAN is not set ++# CONFIG_USB_APPLEDISPLAY is not set ++# CONFIG_USB_SISUSBVGA is not set ++# CONFIG_USB_LD is not set ++# CONFIG_USB_TRANCEVIBRATOR is not set ++# CONFIG_USB_IOWARRIOR is not set ++# CONFIG_USB_TEST is not set ++ ++# ++# USB DSL modem support ++# ++ ++# ++# USB Gadget Support ++# ++CONFIG_USB_GADGET=m ++# CONFIG_USB_GADGET_DEBUG is not set ++# CONFIG_USB_GADGET_DEBUG_FILES is not set ++CONFIG_USB_GADGET_SELECTED=y ++# CONFIG_USB_GADGET_AMD5536UDC is not set ++# CONFIG_USB_GADGET_FSL_USB2 is not set ++# CONFIG_USB_GADGET_NET2280 is not set ++# CONFIG_USB_GADGET_PXA2XX is not set ++# CONFIG_USB_GADGET_M66592 is not set ++CONFIG_USB_GADGET_MCF5445X=y ++CONFIG_USB_MCF5445X=m ++# CONFIG_USB_GADGET_GOKU is not set ++# CONFIG_USB_GADGET_LH7A40X is not set ++# CONFIG_USB_GADGET_OMAP is not set ++# CONFIG_USB_GADGET_S3C2410 is not set ++# CONFIG_USB_GADGET_AT91 is not set ++# CONFIG_USB_GADGET_DUMMY_HCD is not set ++CONFIG_USB_GADGET_DUALSPEED=y ++# CONFIG_USB_ZERO is not set ++CONFIG_USB_ETH=m ++CONFIG_USB_ETH_RNDIS=y ++CONFIG_USB_GADGETFS=m ++CONFIG_USB_FILE_STORAGE=m ++# CONFIG_USB_FILE_STORAGE_TEST is not set ++# CONFIG_USB_G_SERIAL is not set ++# CONFIG_USB_MIDI_GADGET is not set ++# CONFIG_MMC is not set ++# CONFIG_NEW_LEDS is not set ++# CONFIG_RTC_CLASS is not set ++ ++# ++# DMA Engine support ++# ++# CONFIG_DMA_ENGINE is not set ++ ++# ++# DMA Clients ++# ++ ++# ++# DMA Devices ++# ++ ++# ++# Userspace I/O ++# ++# CONFIG_UIO is not set ++ ++# ++# Character devices ++# ++# CONFIG_SERIAL_CONSOLE is not set ++ ++# ++# File systems ++# ++CONFIG_EXT2_FS=y ++# CONFIG_EXT2_FS_XATTR is not set ++# CONFIG_EXT2_FS_XIP is not set ++CONFIG_EXT3_FS=y ++CONFIG_EXT3_FS_XATTR=y ++# CONFIG_EXT3_FS_POSIX_ACL is not set ++# CONFIG_EXT3_FS_SECURITY is not set ++# CONFIG_EXT4DEV_FS is not set ++CONFIG_JBD=y ++# CONFIG_JBD_DEBUG is not set ++CONFIG_FS_MBCACHE=y ++# CONFIG_REISERFS_FS is not set ++# CONFIG_JFS_FS is not set ++# CONFIG_FS_POSIX_ACL is not set ++# CONFIG_XFS_FS is not set ++# CONFIG_GFS2_FS is not set ++# CONFIG_OCFS2_FS is not set ++CONFIG_MINIX_FS=y ++# CONFIG_ROMFS_FS is not set ++# CONFIG_INOTIFY is not set ++# CONFIG_QUOTA is not set ++CONFIG_DNOTIFY=y ++# CONFIG_AUTOFS_FS is not set ++# CONFIG_AUTOFS4_FS is not set ++# CONFIG_FUSE_FS is not set ++ ++# ++# CD-ROM/DVD Filesystems ++# ++# CONFIG_ISO9660_FS is not set ++# CONFIG_UDF_FS is not set ++ ++# ++# DOS/FAT/NT Filesystems ++# ++CONFIG_FAT_FS=y ++CONFIG_MSDOS_FS=y ++CONFIG_VFAT_FS=y ++CONFIG_FAT_DEFAULT_CODEPAGE=437 ++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" ++CONFIG_NTFS_FS=y ++# CONFIG_NTFS_DEBUG is not set ++CONFIG_NTFS_RW=y ++ ++# ++# Pseudo filesystems ++# ++CONFIG_PROC_FS=y ++# CONFIG_PROC_KCORE is not set ++CONFIG_PROC_SYSCTL=y ++CONFIG_SYSFS=y ++CONFIG_TMPFS=y ++# CONFIG_TMPFS_POSIX_ACL is not set ++# CONFIG_HUGETLB_PAGE is not set ++CONFIG_RAMFS=y ++# CONFIG_CONFIGFS_FS is not set ++ ++# ++# Miscellaneous filesystems ++# ++# CONFIG_ADFS_FS is not set ++# CONFIG_AFFS_FS is not set ++# CONFIG_HFS_FS is not set ++# CONFIG_HFSPLUS_FS is not set ++# CONFIG_BEFS_FS is not set ++# CONFIG_BFS_FS is not set ++# CONFIG_EFS_FS is not set ++CONFIG_JFFS2_FS=y ++CONFIG_JFFS2_FS_DEBUG=0 ++CONFIG_JFFS2_FS_WRITEBUFFER=y ++# CONFIG_JFFS2_SUMMARY is not set ++# CONFIG_JFFS2_FS_XATTR is not set ++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set ++CONFIG_JFFS2_ZLIB=y ++CONFIG_JFFS2_RTIME=y ++# CONFIG_JFFS2_RUBIN is not set ++# CONFIG_CRAMFS is not set ++# CONFIG_VXFS_FS is not set ++# CONFIG_HPFS_FS is not set ++# CONFIG_QNX4FS_FS is not set ++# CONFIG_SYSV_FS is not set ++# CONFIG_UFS_FS is not set ++ ++# ++# Network File Systems ++# ++CONFIG_NFS_FS=y ++# CONFIG_NFS_V3 is not set ++# CONFIG_NFS_V4 is not set ++# CONFIG_NFS_DIRECTIO is not set ++# CONFIG_NFSD is not set ++CONFIG_ROOT_NFS=y ++CONFIG_LOCKD=y ++CONFIG_NFS_COMMON=y ++CONFIG_SUNRPC=y ++# CONFIG_SUNRPC_BIND34 is not set ++# CONFIG_RPCSEC_GSS_KRB5 is not set ++# CONFIG_RPCSEC_GSS_SPKM3 is not set ++# CONFIG_SMB_FS is not set ++# CONFIG_CIFS is not set ++# CONFIG_NCP_FS is not set ++# CONFIG_CODA_FS is not set ++# CONFIG_AFS_FS is not set ++ ++# ++# Partition Types ++# ++CONFIG_PARTITION_ADVANCED=y ++# CONFIG_ACORN_PARTITION is not set ++# CONFIG_OSF_PARTITION is not set ++# CONFIG_AMIGA_PARTITION is not set ++# CONFIG_ATARI_PARTITION is not set ++# CONFIG_MAC_PARTITION is not set ++CONFIG_MSDOS_PARTITION=y ++# CONFIG_BSD_DISKLABEL is not set ++# CONFIG_MINIX_SUBPARTITION is not set ++# CONFIG_SOLARIS_X86_PARTITION is not set ++# CONFIG_UNIXWARE_DISKLABEL is not set ++# CONFIG_LDM_PARTITION is not set ++# CONFIG_SGI_PARTITION is not set ++# CONFIG_ULTRIX_PARTITION is not set ++# CONFIG_SUN_PARTITION is not set ++# CONFIG_KARMA_PARTITION is not set ++# CONFIG_EFI_PARTITION is not set ++# CONFIG_SYSV68_PARTITION is not set ++ ++# ++# Native Language Support ++# ++CONFIG_NLS=y ++CONFIG_NLS_DEFAULT="iso8859-1" ++CONFIG_NLS_CODEPAGE_437=y ++# CONFIG_NLS_CODEPAGE_737 is not set ++# CONFIG_NLS_CODEPAGE_775 is not set ++# CONFIG_NLS_CODEPAGE_850 is not set ++# CONFIG_NLS_CODEPAGE_852 is not set ++# CONFIG_NLS_CODEPAGE_855 is not set ++# CONFIG_NLS_CODEPAGE_857 is not set ++# CONFIG_NLS_CODEPAGE_860 is not set ++# CONFIG_NLS_CODEPAGE_861 is not set ++# CONFIG_NLS_CODEPAGE_862 is not set ++# CONFIG_NLS_CODEPAGE_863 is not set ++# CONFIG_NLS_CODEPAGE_864 is not set ++# CONFIG_NLS_CODEPAGE_865 is not set ++# CONFIG_NLS_CODEPAGE_866 is not set ++# CONFIG_NLS_CODEPAGE_869 is not set ++# CONFIG_NLS_CODEPAGE_936 is not set ++# CONFIG_NLS_CODEPAGE_950 is not set ++# CONFIG_NLS_CODEPAGE_932 is not set ++# CONFIG_NLS_CODEPAGE_949 is not set ++# CONFIG_NLS_CODEPAGE_874 is not set ++# CONFIG_NLS_ISO8859_8 is not set ++# CONFIG_NLS_CODEPAGE_1250 is not set ++# CONFIG_NLS_CODEPAGE_1251 is not set ++# CONFIG_NLS_ASCII is not set ++CONFIG_NLS_ISO8859_1=y ++# CONFIG_NLS_ISO8859_2 is not set ++# CONFIG_NLS_ISO8859_3 is not set ++# CONFIG_NLS_ISO8859_4 is not set ++# CONFIG_NLS_ISO8859_5 is not set ++# CONFIG_NLS_ISO8859_6 is not set ++# CONFIG_NLS_ISO8859_7 is not set ++# CONFIG_NLS_ISO8859_9 is not set ++# CONFIG_NLS_ISO8859_13 is not set ++# CONFIG_NLS_ISO8859_14 is not set ++# CONFIG_NLS_ISO8859_15 is not set ++# CONFIG_NLS_KOI8_R is not set ++# CONFIG_NLS_KOI8_U is not set ++CONFIG_NLS_UTF8=y ++ ++# ++# Distributed Lock Manager ++# ++# CONFIG_DLM is not set ++ ++# ++# Kernel hacking ++# ++# CONFIG_PRINTK_TIME is not set ++# CONFIG_ENABLE_MUST_CHECK is not set ++# CONFIG_MAGIC_SYSRQ is not set ++# CONFIG_UNUSED_SYMBOLS is not set ++# CONFIG_DEBUG_FS is not set ++# CONFIG_HEADERS_CHECK is not set ++CONFIG_DEBUG_KERNEL=y ++CONFIG_DETECT_SOFTLOCKUP=y ++CONFIG_SCHED_DEBUG=y ++# CONFIG_SCHEDSTATS is not set ++# CONFIG_TIMER_STATS is not set ++CONFIG_DEBUG_SLAB=y ++# CONFIG_DEBUG_SLAB_LEAK is not set ++# CONFIG_DEBUG_RT_MUTEXES is not set ++# CONFIG_RT_MUTEX_TESTER is not set ++# CONFIG_DEBUG_SPINLOCK is not set ++# CONFIG_DEBUG_MUTEXES is not set ++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set ++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set ++# CONFIG_DEBUG_KOBJECT is not set ++CONFIG_DEBUG_BUGVERBOSE=y ++CONFIG_DEBUG_INFO=y ++# CONFIG_DEBUG_VM is not set ++# CONFIG_DEBUG_LIST is not set ++# CONFIG_FRAME_POINTER is not set ++CONFIG_FORCED_INLINING=y ++# CONFIG_RCU_TORTURE_TEST is not set ++# CONFIG_FAULT_INJECTION is not set ++CONFIG_BOOTPARAM=y ++CONFIG_BOOTPARAM_STRING="root=/dev/nfs rw nfsroot=172.27.155.1:/tftpboot/redstripe ip=172.27.155.55:172.27.155.1:172.27.255.254:255.255.0.0::eth0:off mtdparts=phys_mapped_flash:16m(User)" ++ ++# ++# CodeTEST Setup ++# ++# CONFIG_CODETEST is not set ++ ++# ++# Security options ++# ++# CONFIG_KEYS is not set ++# CONFIG_SECURITY is not set ++CONFIG_CRYPTO=y ++CONFIG_CRYPTO_ALGAPI=y ++CONFIG_CRYPTO_BLKCIPHER=y ++CONFIG_CRYPTO_HASH=y ++CONFIG_CRYPTO_MANAGER=y ++CONFIG_CRYPTO_HMAC=y ++# CONFIG_CRYPTO_XCBC is not set ++# CONFIG_CRYPTO_NULL is not set ++# CONFIG_CRYPTO_MD4 is not set ++CONFIG_CRYPTO_MD5=y ++CONFIG_CRYPTO_SHA1=y ++# CONFIG_CRYPTO_SHA256 is not set ++# CONFIG_CRYPTO_SHA512 is not set ++# CONFIG_CRYPTO_WP512 is not set ++# CONFIG_CRYPTO_TGR192 is not set ++# CONFIG_CRYPTO_GF128MUL is not set ++CONFIG_CRYPTO_ECB=y ++CONFIG_CRYPTO_CBC=y ++CONFIG_CRYPTO_PCBC=m ++# CONFIG_CRYPTO_LRW is not set ++# CONFIG_CRYPTO_CRYPTD is not set ++CONFIG_CRYPTO_DES=y ++# CONFIG_CRYPTO_FCRYPT is not set ++# CONFIG_CRYPTO_BLOWFISH is not set ++# CONFIG_CRYPTO_TWOFISH is not set ++# CONFIG_CRYPTO_SERPENT is not set ++# CONFIG_CRYPTO_AES is not set ++# CONFIG_CRYPTO_CAST5 is not set ++# CONFIG_CRYPTO_CAST6 is not set ++# CONFIG_CRYPTO_TEA is not set ++# CONFIG_CRYPTO_ARC4 is not set ++# CONFIG_CRYPTO_KHAZAD is not set ++# CONFIG_CRYPTO_ANUBIS is not set ++# CONFIG_CRYPTO_DEFLATE is not set ++# CONFIG_CRYPTO_MICHAEL_MIC is not set ++# CONFIG_CRYPTO_CRC32C is not set ++# CONFIG_CRYPTO_CAMELLIA is not set ++CONFIG_CRYPTO_TEST=m ++CONFIG_CRYPTO_HW=y ++CONFIG_CRYPTO_DEV_MCFCAU=y ++CONFIG_CRYPTO_DEV_MCFCAU_DES=y ++CONFIG_CRYPTO_DEV_MCFCAU_AES=y ++CONFIG_CRYPTO_DEV_MCFCAU_MD5=y ++CONFIG_CRYPTO_DEV_MCFCAU_SHA1=y ++ ++# ++# Library routines ++# ++CONFIG_BITREVERSE=y ++CONFIG_CRC_CCITT=y ++CONFIG_CRC16=y ++# CONFIG_CRC_ITU_T is not set ++CONFIG_CRC32=y ++# CONFIG_CRC7 is not set ++CONFIG_LIBCRC32C=y ++CONFIG_ZLIB_INFLATE=y ++CONFIG_ZLIB_DEFLATE=y ++CONFIG_PLIST=y ++CONFIG_HAS_IOMEM=y ++CONFIG_HAS_DMA=y +--- /dev/null ++++ b/arch/m68k/configs/m5475evb_defconfig +@@ -0,0 +1,954 @@ ++# ++# Automatically generated make config: don't edit ++# Linux kernel version: 2.6.25 ++# Wed Jul 9 16:09:19 2008 ++# ++CONFIG_M68K=y ++CONFIG_MMU=y ++# CONFIG_GENERIC_TIME is not set ++# CONFIG_GENERIC_CLOCKEVENTS is not set ++CONFIG_RWSEM_GENERIC_SPINLOCK=y ++# CONFIG_ARCH_HAS_ILOG2_U32 is not set ++# CONFIG_ARCH_HAS_ILOG2_U64 is not set ++CONFIG_GENERIC_HWEIGHT=y ++CONFIG_GENERIC_CALIBRATE_DELAY=y ++CONFIG_TIME_LOW_RES=y ++CONFIG_GENERIC_IOMAP=y ++# CONFIG_NO_IOPORT is not set ++# CONFIG_NO_DMA is not set ++CONFIG_ARCH_SUPPORTS_AOUT=y ++CONFIG_HZ=100 ++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" ++ ++# ++# General setup ++# ++CONFIG_EXPERIMENTAL=y ++CONFIG_BROKEN_ON_SMP=y ++CONFIG_INIT_ENV_ARG_LIMIT=32 ++CONFIG_LOCALVERSION="" ++CONFIG_LOCALVERSION_AUTO=y ++CONFIG_SWAP=y ++CONFIG_SYSVIPC=y ++CONFIG_SYSVIPC_SYSCTL=y ++# CONFIG_POSIX_MQUEUE is not set ++# CONFIG_BSD_PROCESS_ACCT is not set ++# CONFIG_TASKSTATS is not set ++# CONFIG_AUDIT is not set ++CONFIG_IKCONFIG=y ++CONFIG_IKCONFIG_PROC=y ++CONFIG_LOG_BUF_SHIFT=17 ++# CONFIG_CGROUPS is not set ++CONFIG_GROUP_SCHED=y ++CONFIG_FAIR_GROUP_SCHED=y ++# CONFIG_RT_GROUP_SCHED is not set ++CONFIG_USER_SCHED=y ++# CONFIG_CGROUP_SCHED is not set ++CONFIG_SYSFS_DEPRECATED=y ++CONFIG_SYSFS_DEPRECATED_V2=y ++# CONFIG_RELAY is not set ++CONFIG_NAMESPACES=y ++# CONFIG_UTS_NS is not set ++# CONFIG_IPC_NS is not set ++# CONFIG_USER_NS is not set ++# CONFIG_PID_NS is not set ++# CONFIG_BLK_DEV_INITRD is not set ++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set ++CONFIG_SYSCTL=y ++# CONFIG_EMBEDDED is not set ++CONFIG_UID16=y ++CONFIG_SYSCTL_SYSCALL=y ++CONFIG_KALLSYMS=y ++# CONFIG_KALLSYMS_ALL is not set ++# CONFIG_KALLSYMS_EXTRA_PASS is not set ++CONFIG_HOTPLUG=y ++CONFIG_PRINTK=y ++CONFIG_BUG=y ++CONFIG_ELF_CORE=y ++CONFIG_COMPAT_BRK=y ++CONFIG_BASE_FULL=y ++CONFIG_FUTEX=y ++CONFIG_ANON_INODES=y ++CONFIG_EPOLL=y ++CONFIG_SIGNALFD=y ++CONFIG_TIMERFD=y ++CONFIG_EVENTFD=y ++CONFIG_SHMEM=y ++CONFIG_VM_EVENT_COUNTERS=y ++CONFIG_SLAB=y ++# CONFIG_SLUB is not set ++# CONFIG_SLOB is not set ++# CONFIG_PROFILING is not set ++# CONFIG_MARKERS is not set ++# CONFIG_HAVE_OPROFILE is not set ++# CONFIG_HAVE_KPROBES is not set ++# CONFIG_HAVE_KRETPROBES is not set ++CONFIG_PROC_PAGE_MONITOR=y ++CONFIG_SLABINFO=y ++CONFIG_RT_MUTEXES=y ++# CONFIG_TINY_SHMEM is not set ++CONFIG_BASE_SMALL=0 ++CONFIG_MODULES=y ++CONFIG_MODULE_UNLOAD=y ++CONFIG_MODULE_FORCE_UNLOAD=y ++# CONFIG_MODVERSIONS is not set ++# CONFIG_MODULE_SRCVERSION_ALL is not set ++# CONFIG_KMOD is not set ++CONFIG_BLOCK=y ++CONFIG_LBD=y ++# CONFIG_BLK_DEV_IO_TRACE is not set ++# CONFIG_LSF is not set ++# CONFIG_BLK_DEV_BSG is not set ++ ++# ++# IO Schedulers ++# ++CONFIG_IOSCHED_NOOP=y ++CONFIG_IOSCHED_AS=y ++CONFIG_IOSCHED_DEADLINE=y ++CONFIG_IOSCHED_CFQ=y ++# CONFIG_DEFAULT_AS is not set ++# CONFIG_DEFAULT_DEADLINE is not set ++CONFIG_DEFAULT_CFQ=y ++# CONFIG_DEFAULT_NOOP is not set ++CONFIG_DEFAULT_IOSCHED="cfq" ++CONFIG_CLASSIC_RCU=y ++ ++# ++# Platform dependent setup ++# ++# CONFIG_SUN3 is not set ++CONFIG_COLDFIRE=y ++CONFIG_CFV4E=y ++CONFIG_MCD_DMA=y ++# CONFIG_AMIGA is not set ++# CONFIG_ATARI is not set ++CONFIG_PCI=y ++# CONFIG_MAC is not set ++# CONFIG_APOLLO is not set ++# CONFIG_VME is not set ++# CONFIG_HP300 is not set ++# CONFIG_SUN3X is not set ++# CONFIG_Q40 is not set ++ ++# ++# Processor type ++# ++# CONFIG_M68020 is not set ++# CONFIG_M68030 is not set ++# CONFIG_M68040 is not set ++# CONFIG_M68060 is not set ++# CONFIG_M5445X is not set ++CONFIG_M547X_8X=y ++CONFIG_M547X=y ++# CONFIG_M548X is not set ++# CONFIG_M5475AFE is not set ++# CONFIG_M5475BFE is not set ++CONFIG_M5475CFE=y ++# CONFIG_M5475DFE is not set ++# CONFIG_M5475EFE is not set ++# CONFIG_M5475FFE is not set ++# CONFIG_M5485AFE is not set ++# CONFIG_M5485BFE is not set ++# CONFIG_M5485CFE is not set ++# CONFIG_M5485DFE is not set ++# CONFIG_M5485EFE is not set ++# CONFIG_M5485FFE is not set ++CONFIG_MCFCLK=266000000 ++# CONFIG_MCF_USER_HALT is not set ++CONFIG_MMU_CFV4E=y ++CONFIG_SDRAM_BASE=0x00000000 ++CONFIG_SDRAM_SIZE=0x04000000 ++CONFIG_NOR_FLASH_BASE=0xE0000000 ++# CONFIG_M68KFPU_EMU is not set ++CONFIG_ADVANCED=y ++# CONFIG_RMW_INSNS is not set ++CONFIG_SINGLE_MEMORY_CHUNK=y ++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set ++CONFIG_SELECT_MEMORY_MODEL=y ++CONFIG_FLATMEM_MANUAL=y ++# CONFIG_DISCONTIGMEM_MANUAL is not set ++# CONFIG_SPARSEMEM_MANUAL is not set ++CONFIG_FLATMEM=y ++CONFIG_FLAT_NODE_MEM_MAP=y ++CONFIG_NEED_MULTIPLE_NODES=y ++# CONFIG_SPARSEMEM_STATIC is not set ++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set ++CONFIG_SPLIT_PTLOCK_CPUS=4 ++# CONFIG_RESOURCES_64BIT is not set ++CONFIG_ZONE_DMA_FLAG=1 ++CONFIG_BOUNCE=y ++CONFIG_VIRT_TO_BUS=y ++ ++# ++# General setup ++# ++CONFIG_BINFMT_ELF=y ++# CONFIG_BINFMT_AOUT is not set ++# CONFIG_BINFMT_MISC is not set ++CONFIG_PROC_HARDWARE=y ++CONFIG_ZONE_DMA=y ++# CONFIG_ARCH_SUPPORTS_MSI is not set ++CONFIG_PCI_LEGACY=y ++# CONFIG_PCI_DEBUG is not set ++ ++# ++# Power management options ++# ++# CONFIG_PM is not set ++ ++# ++# Networking ++# ++CONFIG_NET=y ++ ++# ++# Networking options ++# ++CONFIG_PACKET=y ++# CONFIG_PACKET_MMAP is not set ++CONFIG_UNIX=y ++CONFIG_XFRM=y ++# CONFIG_XFRM_USER is not set ++# CONFIG_XFRM_SUB_POLICY is not set ++# CONFIG_XFRM_MIGRATE is not set ++# CONFIG_XFRM_STATISTICS is not set ++CONFIG_NET_KEY=y ++# CONFIG_NET_KEY_MIGRATE is not set ++CONFIG_INET=y ++# CONFIG_IP_MULTICAST is not set ++CONFIG_IP_ADVANCED_ROUTER=y ++CONFIG_ASK_IP_FIB_HASH=y ++# CONFIG_IP_FIB_TRIE is not set ++CONFIG_IP_FIB_HASH=y ++# CONFIG_IP_MULTIPLE_TABLES is not set ++# CONFIG_IP_ROUTE_MULTIPATH is not set ++# CONFIG_IP_ROUTE_VERBOSE is not set ++CONFIG_IP_PNP=y ++# CONFIG_IP_PNP_DHCP is not set ++# CONFIG_IP_PNP_BOOTP is not set ++# CONFIG_IP_PNP_RARP is not set ++# CONFIG_NET_IPIP is not set ++# CONFIG_NET_IPGRE is not set ++# CONFIG_ARPD is not set ++# CONFIG_SYN_COOKIES is not set ++CONFIG_INET_AH=y ++CONFIG_INET_ESP=y ++# CONFIG_INET_IPCOMP is not set ++# CONFIG_INET_XFRM_TUNNEL is not set ++# CONFIG_INET_TUNNEL is not set ++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set ++# CONFIG_INET_XFRM_MODE_TUNNEL is not set ++# CONFIG_INET_XFRM_MODE_BEET is not set ++# CONFIG_INET_LRO is not set ++CONFIG_INET_DIAG=y ++CONFIG_INET_TCP_DIAG=y ++# CONFIG_TCP_CONG_ADVANCED is not set ++CONFIG_TCP_CONG_CUBIC=y ++CONFIG_DEFAULT_TCP_CONG="cubic" ++# CONFIG_TCP_MD5SIG is not set ++# CONFIG_IPV6 is not set ++# CONFIG_INET6_XFRM_TUNNEL is not set ++# CONFIG_INET6_TUNNEL is not set ++# CONFIG_NETWORK_SECMARK is not set ++# CONFIG_NETFILTER is not set ++# CONFIG_IP_DCCP is not set ++# CONFIG_IP_SCTP is not set ++# CONFIG_TIPC is not set ++# CONFIG_ATM is not set ++# CONFIG_BRIDGE is not set ++# CONFIG_VLAN_8021Q is not set ++# CONFIG_DECNET is not set ++# CONFIG_LLC2 is not set ++# CONFIG_IPX is not set ++# CONFIG_ATALK is not set ++# CONFIG_X25 is not set ++# CONFIG_LAPB is not set ++# CONFIG_ECONET is not set ++# CONFIG_WAN_ROUTER is not set ++# CONFIG_NET_SCHED is not set ++ ++# ++# Network testing ++# ++# CONFIG_NET_PKTGEN is not set ++# CONFIG_HAMRADIO is not set ++CONFIG_CAN=y ++CONFIG_CAN_RAW=y ++# CONFIG_CAN_BCM is not set ++ ++# ++# CAN Device Drivers ++# ++# CONFIG_CAN_VCAN is not set ++CONFIG_CAN_FLEXCAN=y ++CONFIG_CAN_MCF547X_8X=y ++# CONFIG_CAN_DEBUG_DEVICES is not set ++# CONFIG_IRDA is not set ++# CONFIG_BT is not set ++# CONFIG_AF_RXRPC is not set ++ ++# ++# Wireless ++# ++# CONFIG_CFG80211 is not set ++# CONFIG_WIRELESS_EXT is not set ++# CONFIG_MAC80211 is not set ++# CONFIG_IEEE80211 is not set ++# CONFIG_RFKILL is not set ++# CONFIG_NET_9P is not set ++ ++# ++# Device Drivers ++# ++ ++# ++# Generic Driver Options ++# ++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" ++# CONFIG_STANDALONE is not set ++CONFIG_PREVENT_FIRMWARE_BUILD=y ++CONFIG_FW_LOADER=y ++# CONFIG_DEBUG_DRIVER is not set ++# CONFIG_DEBUG_DEVRES is not set ++# CONFIG_SYS_HYPERVISOR is not set ++# CONFIG_CONNECTOR is not set ++CONFIG_MTD=y ++# CONFIG_MTD_DEBUG is not set ++# CONFIG_MTD_CONCAT is not set ++CONFIG_MTD_PARTITIONS=y ++# CONFIG_MTD_REDBOOT_PARTS is not set ++CONFIG_MTD_CMDLINE_PARTS=y ++ ++# ++# User Modules And Translation Layers ++# ++# CONFIG_MTD_CHAR is not set ++CONFIG_MTD_BLKDEVS=y ++CONFIG_MTD_BLOCK=y ++# CONFIG_FTL is not set ++# CONFIG_NFTL is not set ++# CONFIG_INFTL is not set ++# CONFIG_RFD_FTL is not set ++# CONFIG_SSFDC is not set ++# CONFIG_MTD_OOPS is not set ++ ++# ++# RAM/ROM/Flash chip drivers ++# ++# CONFIG_MTD_CFI is not set ++# CONFIG_MTD_JEDECPROBE is not set ++CONFIG_MTD_MAP_BANK_WIDTH_1=y ++CONFIG_MTD_MAP_BANK_WIDTH_2=y ++CONFIG_MTD_MAP_BANK_WIDTH_4=y ++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set ++CONFIG_MTD_CFI_I1=y ++CONFIG_MTD_CFI_I2=y ++# CONFIG_MTD_CFI_I4 is not set ++# CONFIG_MTD_CFI_I8 is not set ++CONFIG_MTD_RAM=y ++CONFIG_MTD_ROM=y ++# CONFIG_MTD_ABSENT is not set ++ ++# ++# Mapping drivers for chip access ++# ++# CONFIG_MTD_COMPLEX_MAPPINGS is not set ++# CONFIG_MTD_PHYSMAP is not set ++# CONFIG_MTD_INTEL_VR_NOR is not set ++# CONFIG_MTD_PLATRAM is not set ++ ++# ++# Self-contained MTD device drivers ++# ++# CONFIG_MTD_PMC551 is not set ++# CONFIG_MTD_DATAFLASH is not set ++# CONFIG_MTD_M25P80 is not set ++# CONFIG_MTD_SLRAM is not set ++# CONFIG_MTD_PHRAM is not set ++# CONFIG_MTD_MTDRAM is not set ++# CONFIG_MTD_BLOCK2MTD is not set ++ ++# ++# Disk-On-Chip Device Drivers ++# ++# CONFIG_MTD_DOC2000 is not set ++# CONFIG_MTD_DOC2001 is not set ++# CONFIG_MTD_DOC2001PLUS is not set ++# CONFIG_MTD_NAND is not set ++# CONFIG_MTD_ONENAND is not set ++ ++# ++# UBI - Unsorted block images ++# ++# CONFIG_MTD_UBI is not set ++# CONFIG_PARPORT is not set ++CONFIG_BLK_DEV=y ++# CONFIG_BLK_CPQ_DA is not set ++# CONFIG_BLK_CPQ_CISS_DA is not set ++# CONFIG_BLK_DEV_DAC960 is not set ++# CONFIG_BLK_DEV_UMEM is not set ++# CONFIG_BLK_DEV_COW_COMMON is not set ++CONFIG_BLK_DEV_LOOP=y ++# CONFIG_BLK_DEV_CRYPTOLOOP is not set ++# CONFIG_BLK_DEV_NBD is not set ++# CONFIG_BLK_DEV_SX8 is not set ++CONFIG_BLK_DEV_RAM=y ++CONFIG_BLK_DEV_RAM_COUNT=16 ++CONFIG_BLK_DEV_RAM_SIZE=64000 ++# CONFIG_BLK_DEV_XIP is not set ++# CONFIG_CDROM_PKTCDVD is not set ++# CONFIG_ATA_OVER_ETH is not set ++CONFIG_MISC_DEVICES=y ++CONFIG_COLDFIRE_SEC=y ++CONFIG_SEC_DEVICE=y ++# CONFIG_PHANTOM is not set ++# CONFIG_EEPROM_93CX6 is not set ++# CONFIG_SGI_IOC4 is not set ++# CONFIG_TIFM_CORE is not set ++# CONFIG_ENCLOSURE_SERVICES is not set ++CONFIG_HAVE_IDE=y ++# CONFIG_IDE is not set ++ ++# ++# SCSI device support ++# ++# CONFIG_RAID_ATTRS is not set ++CONFIG_SCSI=y ++CONFIG_SCSI_DMA=y ++# CONFIG_SCSI_TGT is not set ++# CONFIG_SCSI_NETLINK is not set ++CONFIG_SCSI_PROC_FS=y ++ ++# ++# SCSI support type (disk, tape, CD-ROM) ++# ++CONFIG_BLK_DEV_SD=y ++# CONFIG_CHR_DEV_ST is not set ++# CONFIG_CHR_DEV_OSST is not set ++# CONFIG_BLK_DEV_SR is not set ++# CONFIG_CHR_DEV_SG is not set ++# CONFIG_CHR_DEV_SCH is not set ++ ++# ++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs ++# ++CONFIG_SCSI_MULTI_LUN=y ++# CONFIG_SCSI_CONSTANTS is not set ++# CONFIG_SCSI_LOGGING is not set ++# CONFIG_SCSI_SCAN_ASYNC is not set ++CONFIG_SCSI_WAIT_SCAN=m ++ ++# ++# SCSI Transports ++# ++# CONFIG_SCSI_SPI_ATTRS is not set ++# CONFIG_SCSI_FC_ATTRS is not set ++# CONFIG_SCSI_ISCSI_ATTRS is not set ++# CONFIG_SCSI_SAS_LIBSAS is not set ++# CONFIG_SCSI_SRP_ATTRS is not set ++# CONFIG_SCSI_LOWLEVEL is not set ++# CONFIG_ATA is not set ++# CONFIG_MD is not set ++# CONFIG_FUSION is not set ++ ++# ++# IEEE 1394 (FireWire) support ++# ++# CONFIG_FIREWIRE is not set ++# CONFIG_IEEE1394 is not set ++# CONFIG_I2O is not set ++CONFIG_NETDEVICES=y ++# CONFIG_NETDEVICES_MULTIQUEUE is not set ++# CONFIG_DUMMY is not set ++# CONFIG_BONDING is not set ++# CONFIG_MACVLAN is not set ++# CONFIG_EQUALIZER is not set ++# CONFIG_TUN is not set ++# CONFIG_VETH is not set ++# CONFIG_ARCNET is not set ++# CONFIG_PHYLIB is not set ++CONFIG_NET_ETHERNET=y ++CONFIG_MII=y ++CONFIG_FEC_548x=y ++CONFIG_FEC_548x_AUTO_NEGOTIATION=y ++# CONFIG_FEC_548x_ENABLE_FEC2 is not set ++# CONFIG_HAPPYMEAL is not set ++# CONFIG_SUNGEM is not set ++# CONFIG_CASSINI is not set ++# CONFIG_NET_VENDOR_3COM is not set ++# CONFIG_ENC28J60 is not set ++# CONFIG_NET_TULIP is not set ++# CONFIG_HP100 is not set ++# CONFIG_IBM_NEW_EMAC_ZMII is not set ++# CONFIG_IBM_NEW_EMAC_RGMII is not set ++# CONFIG_IBM_NEW_EMAC_TAH is not set ++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set ++# CONFIG_NET_PCI is not set ++# CONFIG_B44 is not set ++# CONFIG_NETDEV_1000 is not set ++# CONFIG_NETDEV_10000 is not set ++# CONFIG_TR is not set ++ ++# ++# Wireless LAN ++# ++# CONFIG_WLAN_PRE80211 is not set ++# CONFIG_WLAN_80211 is not set ++# CONFIG_WAN is not set ++# CONFIG_FDDI is not set ++# CONFIG_HIPPI is not set ++# CONFIG_PPP is not set ++# CONFIG_SLIP is not set ++# CONFIG_NET_FC is not set ++# CONFIG_NETCONSOLE is not set ++# CONFIG_NETPOLL is not set ++# CONFIG_NET_POLL_CONTROLLER is not set ++# CONFIG_ISDN is not set ++# CONFIG_PHONE is not set ++ ++# ++# Input device support ++# ++CONFIG_INPUT=y ++# CONFIG_INPUT_FF_MEMLESS is not set ++# CONFIG_INPUT_POLLDEV is not set ++ ++# ++# Userland interfaces ++# ++CONFIG_INPUT_MOUSEDEV=y ++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set ++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 ++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 ++# CONFIG_INPUT_JOYDEV is not set ++CONFIG_INPUT_EVDEV=y ++# CONFIG_INPUT_EVBUG is not set ++ ++# ++# Input Device Drivers ++# ++CONFIG_INPUT_KEYBOARD=y ++# CONFIG_KEYBOARD_ATKBD is not set ++# CONFIG_KEYBOARD_SUNKBD is not set ++# CONFIG_KEYBOARD_LKKBD is not set ++# CONFIG_KEYBOARD_XTKBD is not set ++# CONFIG_KEYBOARD_NEWTON is not set ++# CONFIG_KEYBOARD_STOWAWAY is not set ++# CONFIG_INPUT_MOUSE is not set ++# CONFIG_INPUT_JOYSTICK is not set ++# CONFIG_INPUT_TABLET is not set ++# CONFIG_INPUT_TOUCHSCREEN is not set ++# CONFIG_INPUT_MISC is not set ++ ++# ++# Hardware I/O ports ++# ++CONFIG_SERIO=y ++CONFIG_SERIO_SERPORT=y ++# CONFIG_SERIO_PCIPS2 is not set ++# CONFIG_SERIO_RAW is not set ++# CONFIG_GAMEPORT is not set ++ ++# ++# Character devices ++# ++CONFIG_VT=y ++CONFIG_VT_CONSOLE=y ++CONFIG_HW_CONSOLE=y ++# CONFIG_VT_HW_CONSOLE_BINDING is not set ++# CONFIG_SERIAL_NONSTANDARD is not set ++# CONFIG_NOZOMI is not set ++ ++# ++# Serial drivers ++# ++# CONFIG_SERIAL_8250 is not set ++ ++# ++# Non-8250 serial port support ++# ++CONFIG_SERIAL_COLDFIRE=y ++CONFIG_SERIAL_COLDFIRE_IRDA=y ++# CONFIG_SERIAL_MCF is not set ++# CONFIG_SERIAL_JSM is not set ++CONFIG_UNIX98_PTYS=y ++# CONFIG_LEGACY_PTYS is not set ++# CONFIG_IPMI_HANDLER is not set ++# CONFIG_HW_RANDOM is not set ++# CONFIG_GEN_RTC is not set ++# CONFIG_R3964 is not set ++# CONFIG_APPLICOM is not set ++# CONFIG_RAW_DRIVER is not set ++# CONFIG_TCG_TPM is not set ++# CONFIG_I2C is not set ++ ++# ++# SPI support ++# ++CONFIG_SPI=y ++CONFIG_SPI_DEBUG=y ++# CONFIG_COLDFIRE_EDMA is not set ++CONFIG_SPI_MASTER=y ++ ++# ++# SPI Master Controller Drivers ++# ++# CONFIG_SPI_BITBANG is not set ++CONFIG_SPI_COLDFIRE=y ++ ++# ++# SPI Protocol Masters ++# ++# CONFIG_SPI_AT25 is not set ++# CONFIG_SPI_SPIDEV is not set ++# CONFIG_SPI_TLE62X0 is not set ++# CONFIG_SPI_COLDFIRE_SSI_AUDIO is not set ++# CONFIG_W1 is not set ++# CONFIG_POWER_SUPPLY is not set ++# CONFIG_HWMON is not set ++# CONFIG_THERMAL is not set ++CONFIG_WATCHDOG=y ++# CONFIG_WATCHDOG_NOWAYOUT is not set ++ ++# ++# Watchdog Device Drivers ++# ++# CONFIG_SOFT_WATCHDOG is not set ++CONFIG_COLDFIRE_WATCHDOG=m ++ ++# ++# PCI-based Watchdog Cards ++# ++# CONFIG_PCIPCWATCHDOG is not set ++# CONFIG_WDTPCI is not set ++ ++# ++# Sonics Silicon Backplane ++# ++CONFIG_SSB_POSSIBLE=y ++# CONFIG_SSB is not set ++ ++# ++# Multifunction device drivers ++# ++# CONFIG_MFD_SM501 is not set ++ ++# ++# Multimedia devices ++# ++# CONFIG_VIDEO_DEV is not set ++# CONFIG_DVB_CORE is not set ++CONFIG_DAB=y ++ ++# ++# Graphics support ++# ++# CONFIG_DRM is not set ++# CONFIG_VGASTATE is not set ++CONFIG_VIDEO_OUTPUT_CONTROL=m ++# CONFIG_FB is not set ++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set ++ ++# ++# Display device support ++# ++# CONFIG_DISPLAY_SUPPORT is not set ++ ++# ++# Console display driver support ++# ++CONFIG_DUMMY_CONSOLE=y ++ ++# ++# Sound ++# ++# CONFIG_SOUND is not set ++CONFIG_HID_SUPPORT=y ++CONFIG_HID=y ++CONFIG_HID_DEBUG=y ++# CONFIG_HIDRAW is not set ++# CONFIG_USB_SUPPORT is not set ++# CONFIG_MMC is not set ++# CONFIG_MEMSTICK is not set ++# CONFIG_NEW_LEDS is not set ++# CONFIG_INFINIBAND is not set ++# CONFIG_RTC_CLASS is not set ++ ++# ++# Userspace I/O ++# ++# CONFIG_UIO is not set ++ ++# ++# Character devices ++# ++# CONFIG_SERIAL_CONSOLE is not set ++ ++# ++# File systems ++# ++CONFIG_EXT2_FS=y ++# CONFIG_EXT2_FS_XATTR is not set ++# CONFIG_EXT2_FS_XIP is not set ++CONFIG_EXT3_FS=y ++CONFIG_EXT3_FS_XATTR=y ++# CONFIG_EXT3_FS_POSIX_ACL is not set ++# CONFIG_EXT3_FS_SECURITY is not set ++# CONFIG_EXT4DEV_FS is not set ++CONFIG_JBD=y ++CONFIG_FS_MBCACHE=y ++# CONFIG_REISERFS_FS is not set ++# CONFIG_JFS_FS is not set ++# CONFIG_FS_POSIX_ACL is not set ++# CONFIG_XFS_FS is not set ++# CONFIG_GFS2_FS is not set ++# CONFIG_OCFS2_FS is not set ++CONFIG_DNOTIFY=y ++# CONFIG_INOTIFY is not set ++# CONFIG_QUOTA is not set ++# CONFIG_AUTOFS_FS is not set ++# CONFIG_AUTOFS4_FS is not set ++# CONFIG_FUSE_FS is not set ++ ++# ++# CD-ROM/DVD Filesystems ++# ++# CONFIG_ISO9660_FS is not set ++# CONFIG_UDF_FS is not set ++ ++# ++# DOS/FAT/NT Filesystems ++# ++CONFIG_FAT_FS=y ++CONFIG_MSDOS_FS=y ++CONFIG_VFAT_FS=y ++CONFIG_FAT_DEFAULT_CODEPAGE=437 ++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" ++CONFIG_NTFS_FS=y ++# CONFIG_NTFS_DEBUG is not set ++CONFIG_NTFS_RW=y ++ ++# ++# Pseudo filesystems ++# ++CONFIG_PROC_FS=y ++# CONFIG_PROC_KCORE is not set ++CONFIG_PROC_SYSCTL=y ++CONFIG_SYSFS=y ++CONFIG_TMPFS=y ++# CONFIG_TMPFS_POSIX_ACL is not set ++# CONFIG_HUGETLB_PAGE is not set ++# CONFIG_CONFIGFS_FS is not set ++ ++# ++# Miscellaneous filesystems ++# ++# CONFIG_ADFS_FS is not set ++# CONFIG_AFFS_FS is not set ++# CONFIG_HFS_FS is not set ++# CONFIG_HFSPLUS_FS is not set ++# CONFIG_BEFS_FS is not set ++# CONFIG_BFS_FS is not set ++# CONFIG_EFS_FS is not set ++# CONFIG_JFFS2_FS is not set ++# CONFIG_CRAMFS is not set ++# CONFIG_VXFS_FS is not set ++CONFIG_MINIX_FS=y ++# CONFIG_HPFS_FS is not set ++# CONFIG_QNX4FS_FS is not set ++CONFIG_ROMFS_FS=y ++# CONFIG_SYSV_FS is not set ++# CONFIG_UFS_FS is not set ++CONFIG_NETWORK_FILESYSTEMS=y ++CONFIG_NFS_FS=y ++# CONFIG_NFS_V3 is not set ++# CONFIG_NFS_V4 is not set ++# CONFIG_NFS_DIRECTIO is not set ++# CONFIG_NFSD is not set ++CONFIG_ROOT_NFS=y ++CONFIG_LOCKD=y ++CONFIG_NFS_COMMON=y ++CONFIG_SUNRPC=y ++# CONFIG_SUNRPC_BIND34 is not set ++# CONFIG_RPCSEC_GSS_KRB5 is not set ++# CONFIG_RPCSEC_GSS_SPKM3 is not set ++# CONFIG_SMB_FS is not set ++# CONFIG_CIFS is not set ++# CONFIG_NCP_FS is not set ++# CONFIG_CODA_FS is not set ++# CONFIG_AFS_FS is not set ++ ++# ++# Partition Types ++# ++CONFIG_PARTITION_ADVANCED=y ++# CONFIG_ACORN_PARTITION is not set ++# CONFIG_OSF_PARTITION is not set ++# CONFIG_AMIGA_PARTITION is not set ++# CONFIG_ATARI_PARTITION is not set ++# CONFIG_MAC_PARTITION is not set ++CONFIG_MSDOS_PARTITION=y ++# CONFIG_BSD_DISKLABEL is not set ++# CONFIG_MINIX_SUBPARTITION is not set ++# CONFIG_SOLARIS_X86_PARTITION is not set ++# CONFIG_UNIXWARE_DISKLABEL is not set ++# CONFIG_LDM_PARTITION is not set ++# CONFIG_SGI_PARTITION is not set ++# CONFIG_ULTRIX_PARTITION is not set ++# CONFIG_SUN_PARTITION is not set ++# CONFIG_KARMA_PARTITION is not set ++# CONFIG_EFI_PARTITION is not set ++# CONFIG_SYSV68_PARTITION is not set ++CONFIG_NLS=y ++CONFIG_NLS_DEFAULT="iso8859-1" ++CONFIG_NLS_CODEPAGE_437=y ++# CONFIG_NLS_CODEPAGE_737 is not set ++# CONFIG_NLS_CODEPAGE_775 is not set ++# CONFIG_NLS_CODEPAGE_850 is not set ++# CONFIG_NLS_CODEPAGE_852 is not set ++# CONFIG_NLS_CODEPAGE_855 is not set ++# CONFIG_NLS_CODEPAGE_857 is not set ++# CONFIG_NLS_CODEPAGE_860 is not set ++# CONFIG_NLS_CODEPAGE_861 is not set ++# CONFIG_NLS_CODEPAGE_862 is not set ++# CONFIG_NLS_CODEPAGE_863 is not set ++# CONFIG_NLS_CODEPAGE_864 is not set ++# CONFIG_NLS_CODEPAGE_865 is not set ++# CONFIG_NLS_CODEPAGE_866 is not set ++# CONFIG_NLS_CODEPAGE_869 is not set ++# CONFIG_NLS_CODEPAGE_936 is not set ++# CONFIG_NLS_CODEPAGE_950 is not set ++# CONFIG_NLS_CODEPAGE_932 is not set ++# CONFIG_NLS_CODEPAGE_949 is not set ++# CONFIG_NLS_CODEPAGE_874 is not set ++# CONFIG_NLS_ISO8859_8 is not set ++# CONFIG_NLS_CODEPAGE_1250 is not set ++# CONFIG_NLS_CODEPAGE_1251 is not set ++# CONFIG_NLS_ASCII is not set ++CONFIG_NLS_ISO8859_1=y ++# CONFIG_NLS_ISO8859_2 is not set ++# CONFIG_NLS_ISO8859_3 is not set ++# CONFIG_NLS_ISO8859_4 is not set ++# CONFIG_NLS_ISO8859_5 is not set ++# CONFIG_NLS_ISO8859_6 is not set ++# CONFIG_NLS_ISO8859_7 is not set ++# CONFIG_NLS_ISO8859_9 is not set ++# CONFIG_NLS_ISO8859_13 is not set ++# CONFIG_NLS_ISO8859_14 is not set ++# CONFIG_NLS_ISO8859_15 is not set ++# CONFIG_NLS_KOI8_R is not set ++# CONFIG_NLS_KOI8_U is not set ++CONFIG_NLS_UTF8=y ++# CONFIG_DLM is not set ++ ++# ++# Kernel hacking ++# ++# CONFIG_PRINTK_TIME is not set ++CONFIG_ENABLE_WARN_DEPRECATED=y ++# CONFIG_ENABLE_MUST_CHECK is not set ++# CONFIG_MAGIC_SYSRQ is not set ++# CONFIG_UNUSED_SYMBOLS is not set ++# CONFIG_DEBUG_FS is not set ++# CONFIG_HEADERS_CHECK is not set ++CONFIG_DEBUG_KERNEL=y ++CONFIG_DETECT_SOFTLOCKUP=y ++CONFIG_SCHED_DEBUG=y ++# CONFIG_SCHEDSTATS is not set ++# CONFIG_TIMER_STATS is not set ++CONFIG_DEBUG_SLAB=y ++# CONFIG_DEBUG_SLAB_LEAK is not set ++# CONFIG_DEBUG_RT_MUTEXES is not set ++# CONFIG_RT_MUTEX_TESTER is not set ++# CONFIG_DEBUG_SPINLOCK is not set ++# CONFIG_DEBUG_MUTEXES is not set ++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set ++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set ++# CONFIG_DEBUG_KOBJECT is not set ++CONFIG_DEBUG_BUGVERBOSE=y ++CONFIG_DEBUG_INFO=y ++# CONFIG_DEBUG_VM is not set ++# CONFIG_DEBUG_LIST is not set ++# CONFIG_DEBUG_SG is not set ++# CONFIG_FRAME_POINTER is not set ++# CONFIG_BOOT_PRINTK_DELAY is not set ++# CONFIG_RCU_TORTURE_TEST is not set ++# CONFIG_BACKTRACE_SELF_TEST is not set ++# CONFIG_FAULT_INJECTION is not set ++# CONFIG_SAMPLES is not set ++CONFIG_BOOTPARAM=y ++CONFIG_BOOTPARAM_STRING="root=/dev/nfs rw nfsroot=172.27.163.2:/tftpboot/ltib ip=172.27.163.3:172.27.163.2:172.27.255.254:255.255.0.0::eth0:off mtdparts=phys_mapped_flash:16m(User)" ++ ++# ++# Security options ++# ++# CONFIG_KEYS is not set ++# CONFIG_SECURITY is not set ++# CONFIG_SECURITY_FILE_CAPABILITIES is not set ++CONFIG_CRYPTO=y ++CONFIG_CRYPTO_ALGAPI=y ++CONFIG_CRYPTO_AEAD=y ++CONFIG_CRYPTO_BLKCIPHER=y ++# CONFIG_CRYPTO_SEQIV is not set ++CONFIG_CRYPTO_HASH=y ++CONFIG_CRYPTO_MANAGER=y ++CONFIG_CRYPTO_HMAC=y ++# CONFIG_CRYPTO_XCBC is not set ++# CONFIG_CRYPTO_NULL is not set ++# CONFIG_CRYPTO_MD4 is not set ++CONFIG_CRYPTO_MD5=y ++CONFIG_CRYPTO_SHA1=y ++# CONFIG_CRYPTO_SHA256 is not set ++# CONFIG_CRYPTO_SHA512 is not set ++# CONFIG_CRYPTO_WP512 is not set ++# CONFIG_CRYPTO_TGR192 is not set ++# CONFIG_CRYPTO_GF128MUL is not set ++# CONFIG_CRYPTO_ECB is not set ++CONFIG_CRYPTO_CBC=y ++# CONFIG_CRYPTO_PCBC is not set ++# CONFIG_CRYPTO_LRW is not set ++# CONFIG_CRYPTO_XTS is not set ++# CONFIG_CRYPTO_CTR is not set ++# CONFIG_CRYPTO_GCM is not set ++# CONFIG_CRYPTO_CCM is not set ++# CONFIG_CRYPTO_CRYPTD is not set ++CONFIG_CRYPTO_DES=y ++# CONFIG_CRYPTO_FCRYPT is not set ++# CONFIG_CRYPTO_BLOWFISH is not set ++# CONFIG_CRYPTO_TWOFISH is not set ++# CONFIG_CRYPTO_SERPENT is not set ++# CONFIG_CRYPTO_AES is not set ++# CONFIG_CRYPTO_CAST5 is not set ++# CONFIG_CRYPTO_CAST6 is not set ++# CONFIG_CRYPTO_TEA is not set ++# CONFIG_CRYPTO_ARC4 is not set ++# CONFIG_CRYPTO_KHAZAD is not set ++# CONFIG_CRYPTO_ANUBIS is not set ++# CONFIG_CRYPTO_SEED is not set ++# CONFIG_CRYPTO_SALSA20 is not set ++# CONFIG_CRYPTO_DEFLATE is not set ++# CONFIG_CRYPTO_MICHAEL_MIC is not set ++# CONFIG_CRYPTO_CRC32C is not set ++# CONFIG_CRYPTO_CAMELLIA is not set ++CONFIG_CRYPTO_TEST=m ++CONFIG_CRYPTO_AUTHENC=y ++# CONFIG_CRYPTO_LZO is not set ++# CONFIG_CRYPTO_HW is not set ++ ++# ++# Library routines ++# ++CONFIG_BITREVERSE=y ++CONFIG_CRC_CCITT=y ++CONFIG_CRC16=y ++# CONFIG_CRC_ITU_T is not set ++CONFIG_CRC32=y ++# CONFIG_CRC7 is not set ++CONFIG_LIBCRC32C=y ++CONFIG_PLIST=y ++CONFIG_HAS_IOMEM=y ++CONFIG_HAS_IOPORT=y ++CONFIG_HAS_DMA=y +--- /dev/null ++++ b/arch/m68k/configs/m5485evb_defconfig +@@ -0,0 +1,859 @@ ++# ++# Automatically generated make config: don't edit ++# Linux kernel version: 2.6.25 ++# Thu Jul 10 16:12:53 2008 ++# ++CONFIG_M68K=y ++CONFIG_MMU=y ++# CONFIG_GENERIC_TIME is not set ++# CONFIG_GENERIC_CLOCKEVENTS is not set ++CONFIG_RWSEM_GENERIC_SPINLOCK=y ++# CONFIG_ARCH_HAS_ILOG2_U32 is not set ++# CONFIG_ARCH_HAS_ILOG2_U64 is not set ++CONFIG_GENERIC_HWEIGHT=y ++CONFIG_GENERIC_CALIBRATE_DELAY=y ++CONFIG_TIME_LOW_RES=y ++CONFIG_GENERIC_IOMAP=y ++# CONFIG_NO_IOPORT is not set ++# CONFIG_NO_DMA is not set ++CONFIG_ARCH_SUPPORTS_AOUT=y ++CONFIG_HZ=100 ++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" ++ ++# ++# General setup ++# ++CONFIG_EXPERIMENTAL=y ++CONFIG_BROKEN_ON_SMP=y ++CONFIG_INIT_ENV_ARG_LIMIT=32 ++CONFIG_LOCALVERSION="" ++CONFIG_LOCALVERSION_AUTO=y ++CONFIG_SWAP=y ++CONFIG_SYSVIPC=y ++CONFIG_SYSVIPC_SYSCTL=y ++# CONFIG_POSIX_MQUEUE is not set ++# CONFIG_BSD_PROCESS_ACCT is not set ++# CONFIG_TASKSTATS is not set ++# CONFIG_AUDIT is not set ++CONFIG_IKCONFIG=y ++CONFIG_IKCONFIG_PROC=y ++CONFIG_LOG_BUF_SHIFT=17 ++# CONFIG_CGROUPS is not set ++CONFIG_GROUP_SCHED=y ++CONFIG_FAIR_GROUP_SCHED=y ++# CONFIG_RT_GROUP_SCHED is not set ++CONFIG_USER_SCHED=y ++# CONFIG_CGROUP_SCHED is not set ++CONFIG_SYSFS_DEPRECATED=y ++CONFIG_SYSFS_DEPRECATED_V2=y ++# CONFIG_RELAY is not set ++CONFIG_NAMESPACES=y ++# CONFIG_UTS_NS is not set ++# CONFIG_IPC_NS is not set ++# CONFIG_USER_NS is not set ++# CONFIG_PID_NS is not set ++# CONFIG_BLK_DEV_INITRD is not set ++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set ++CONFIG_SYSCTL=y ++# CONFIG_EMBEDDED is not set ++CONFIG_UID16=y ++CONFIG_SYSCTL_SYSCALL=y ++CONFIG_KALLSYMS=y ++# CONFIG_KALLSYMS_ALL is not set ++# CONFIG_KALLSYMS_EXTRA_PASS is not set ++CONFIG_HOTPLUG=y ++CONFIG_PRINTK=y ++CONFIG_BUG=y ++CONFIG_ELF_CORE=y ++CONFIG_COMPAT_BRK=y ++CONFIG_BASE_FULL=y ++CONFIG_FUTEX=y ++CONFIG_ANON_INODES=y ++CONFIG_EPOLL=y ++CONFIG_SIGNALFD=y ++CONFIG_TIMERFD=y ++CONFIG_EVENTFD=y ++CONFIG_SHMEM=y ++CONFIG_VM_EVENT_COUNTERS=y ++CONFIG_SLAB=y ++# CONFIG_SLUB is not set ++# CONFIG_SLOB is not set ++# CONFIG_PROFILING is not set ++# CONFIG_MARKERS is not set ++# CONFIG_HAVE_OPROFILE is not set ++# CONFIG_HAVE_KPROBES is not set ++# CONFIG_HAVE_KRETPROBES is not set ++CONFIG_PROC_PAGE_MONITOR=y ++CONFIG_SLABINFO=y ++CONFIG_RT_MUTEXES=y ++# CONFIG_TINY_SHMEM is not set ++CONFIG_BASE_SMALL=0 ++CONFIG_MODULES=y ++CONFIG_MODULE_UNLOAD=y ++CONFIG_MODULE_FORCE_UNLOAD=y ++# CONFIG_MODVERSIONS is not set ++# CONFIG_MODULE_SRCVERSION_ALL is not set ++# CONFIG_KMOD is not set ++CONFIG_BLOCK=y ++CONFIG_LBD=y ++# CONFIG_BLK_DEV_IO_TRACE is not set ++# CONFIG_LSF is not set ++# CONFIG_BLK_DEV_BSG is not set ++ ++# ++# IO Schedulers ++# ++CONFIG_IOSCHED_NOOP=y ++CONFIG_IOSCHED_AS=y ++CONFIG_IOSCHED_DEADLINE=y ++CONFIG_IOSCHED_CFQ=y ++# CONFIG_DEFAULT_AS is not set ++# CONFIG_DEFAULT_DEADLINE is not set ++CONFIG_DEFAULT_CFQ=y ++# CONFIG_DEFAULT_NOOP is not set ++CONFIG_DEFAULT_IOSCHED="cfq" ++CONFIG_CLASSIC_RCU=y ++ ++# ++# Platform dependent setup ++# ++# CONFIG_SUN3 is not set ++CONFIG_COLDFIRE=y ++CONFIG_CFV4E=y ++CONFIG_MCD_DMA=y ++# CONFIG_AMIGA is not set ++# CONFIG_ATARI is not set ++# CONFIG_MAC is not set ++# CONFIG_APOLLO is not set ++# CONFIG_VME is not set ++# CONFIG_HP300 is not set ++# CONFIG_SUN3X is not set ++# CONFIG_Q40 is not set ++ ++# ++# Processor type ++# ++# CONFIG_M68020 is not set ++# CONFIG_M68030 is not set ++# CONFIG_M68040 is not set ++# CONFIG_M68060 is not set ++# CONFIG_M5445X is not set ++CONFIG_M547X_8X=y ++# CONFIG_M547X is not set ++CONFIG_M548X=y ++# CONFIG_M5475AFE is not set ++# CONFIG_M5475BFE is not set ++# CONFIG_M5475CFE is not set ++# CONFIG_M5475DFE is not set ++# CONFIG_M5475EFE is not set ++# CONFIG_M5475FFE is not set ++# CONFIG_M5485AFE is not set ++# CONFIG_M5485BFE is not set ++CONFIG_M5485CFE=y ++# CONFIG_M5485DFE is not set ++# CONFIG_M5485EFE is not set ++# CONFIG_M5485FFE is not set ++CONFIG_MCFCLK=200000000 ++# CONFIG_MCF_USER_HALT is not set ++CONFIG_MMU_CFV4E=y ++CONFIG_SDRAM_BASE=0x00000000 ++CONFIG_SDRAM_SIZE=0x04000000 ++CONFIG_NOR_FLASH_BASE=0xE0000000 ++# CONFIG_M68KFPU_EMU is not set ++CONFIG_ADVANCED=y ++# CONFIG_RMW_INSNS is not set ++CONFIG_SINGLE_MEMORY_CHUNK=y ++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set ++CONFIG_SELECT_MEMORY_MODEL=y ++CONFIG_FLATMEM_MANUAL=y ++# CONFIG_DISCONTIGMEM_MANUAL is not set ++# CONFIG_SPARSEMEM_MANUAL is not set ++CONFIG_FLATMEM=y ++CONFIG_FLAT_NODE_MEM_MAP=y ++CONFIG_NEED_MULTIPLE_NODES=y ++# CONFIG_SPARSEMEM_STATIC is not set ++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set ++CONFIG_SPLIT_PTLOCK_CPUS=4 ++# CONFIG_RESOURCES_64BIT is not set ++CONFIG_ZONE_DMA_FLAG=1 ++CONFIG_BOUNCE=y ++CONFIG_VIRT_TO_BUS=y ++ ++# ++# General setup ++# ++CONFIG_BINFMT_ELF=y ++# CONFIG_BINFMT_AOUT is not set ++# CONFIG_BINFMT_MISC is not set ++CONFIG_PROC_HARDWARE=y ++CONFIG_ZONE_DMA=y ++# CONFIG_ARCH_SUPPORTS_MSI is not set ++ ++# ++# Power management options ++# ++# CONFIG_PM is not set ++ ++# ++# Networking ++# ++CONFIG_NET=y ++ ++# ++# Networking options ++# ++CONFIG_PACKET=y ++# CONFIG_PACKET_MMAP is not set ++CONFIG_UNIX=y ++CONFIG_XFRM=y ++# CONFIG_XFRM_USER is not set ++# CONFIG_XFRM_SUB_POLICY is not set ++# CONFIG_XFRM_MIGRATE is not set ++# CONFIG_XFRM_STATISTICS is not set ++CONFIG_NET_KEY=y ++# CONFIG_NET_KEY_MIGRATE is not set ++CONFIG_INET=y ++# CONFIG_IP_MULTICAST is not set ++CONFIG_IP_ADVANCED_ROUTER=y ++CONFIG_ASK_IP_FIB_HASH=y ++# CONFIG_IP_FIB_TRIE is not set ++CONFIG_IP_FIB_HASH=y ++# CONFIG_IP_MULTIPLE_TABLES is not set ++# CONFIG_IP_ROUTE_MULTIPATH is not set ++# CONFIG_IP_ROUTE_VERBOSE is not set ++CONFIG_IP_PNP=y ++# CONFIG_IP_PNP_DHCP is not set ++# CONFIG_IP_PNP_BOOTP is not set ++# CONFIG_IP_PNP_RARP is not set ++# CONFIG_NET_IPIP is not set ++# CONFIG_NET_IPGRE is not set ++# CONFIG_ARPD is not set ++# CONFIG_SYN_COOKIES is not set ++CONFIG_INET_AH=y ++CONFIG_INET_ESP=y ++# CONFIG_INET_IPCOMP is not set ++# CONFIG_INET_XFRM_TUNNEL is not set ++# CONFIG_INET_TUNNEL is not set ++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set ++# CONFIG_INET_XFRM_MODE_TUNNEL is not set ++# CONFIG_INET_XFRM_MODE_BEET is not set ++# CONFIG_INET_LRO is not set ++CONFIG_INET_DIAG=y ++CONFIG_INET_TCP_DIAG=y ++# CONFIG_TCP_CONG_ADVANCED is not set ++CONFIG_TCP_CONG_CUBIC=y ++CONFIG_DEFAULT_TCP_CONG="cubic" ++# CONFIG_TCP_MD5SIG is not set ++# CONFIG_IPV6 is not set ++# CONFIG_INET6_XFRM_TUNNEL is not set ++# CONFIG_INET6_TUNNEL is not set ++# CONFIG_NETWORK_SECMARK is not set ++# CONFIG_NETFILTER is not set ++# CONFIG_IP_DCCP is not set ++# CONFIG_IP_SCTP is not set ++# CONFIG_TIPC is not set ++# CONFIG_ATM is not set ++# CONFIG_BRIDGE is not set ++# CONFIG_VLAN_8021Q is not set ++# CONFIG_DECNET is not set ++# CONFIG_LLC2 is not set ++# CONFIG_IPX is not set ++# CONFIG_ATALK is not set ++# CONFIG_X25 is not set ++# CONFIG_LAPB is not set ++# CONFIG_ECONET is not set ++# CONFIG_WAN_ROUTER is not set ++# CONFIG_NET_SCHED is not set ++ ++# ++# Network testing ++# ++# CONFIG_NET_PKTGEN is not set ++# CONFIG_HAMRADIO is not set ++# CONFIG_CAN is not set ++# CONFIG_IRDA is not set ++# CONFIG_BT is not set ++# CONFIG_AF_RXRPC is not set ++ ++# ++# Wireless ++# ++# CONFIG_CFG80211 is not set ++# CONFIG_WIRELESS_EXT is not set ++# CONFIG_MAC80211 is not set ++# CONFIG_IEEE80211 is not set ++# CONFIG_RFKILL is not set ++# CONFIG_NET_9P is not set ++ ++# ++# Device Drivers ++# ++ ++# ++# Generic Driver Options ++# ++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" ++# CONFIG_STANDALONE is not set ++CONFIG_PREVENT_FIRMWARE_BUILD=y ++CONFIG_FW_LOADER=y ++# CONFIG_DEBUG_DRIVER is not set ++# CONFIG_DEBUG_DEVRES is not set ++# CONFIG_SYS_HYPERVISOR is not set ++# CONFIG_CONNECTOR is not set ++# CONFIG_MTD is not set ++# CONFIG_PARPORT is not set ++CONFIG_BLK_DEV=y ++# CONFIG_BLK_DEV_COW_COMMON is not set ++CONFIG_BLK_DEV_LOOP=y ++# CONFIG_BLK_DEV_CRYPTOLOOP is not set ++# CONFIG_BLK_DEV_NBD is not set ++CONFIG_BLK_DEV_RAM=y ++CONFIG_BLK_DEV_RAM_COUNT=16 ++CONFIG_BLK_DEV_RAM_SIZE=64000 ++# CONFIG_BLK_DEV_XIP is not set ++# CONFIG_CDROM_PKTCDVD is not set ++# CONFIG_ATA_OVER_ETH is not set ++CONFIG_MISC_DEVICES=y ++CONFIG_COLDFIRE_SEC=y ++CONFIG_SEC_DEVICE=y ++# CONFIG_EEPROM_93CX6 is not set ++# CONFIG_ENCLOSURE_SERVICES is not set ++CONFIG_HAVE_IDE=y ++# CONFIG_IDE is not set ++ ++# ++# SCSI device support ++# ++# CONFIG_RAID_ATTRS is not set ++CONFIG_SCSI=y ++CONFIG_SCSI_DMA=y ++# CONFIG_SCSI_TGT is not set ++# CONFIG_SCSI_NETLINK is not set ++CONFIG_SCSI_PROC_FS=y ++ ++# ++# SCSI support type (disk, tape, CD-ROM) ++# ++CONFIG_BLK_DEV_SD=y ++# CONFIG_CHR_DEV_ST is not set ++# CONFIG_CHR_DEV_OSST is not set ++# CONFIG_BLK_DEV_SR is not set ++# CONFIG_CHR_DEV_SG is not set ++# CONFIG_CHR_DEV_SCH is not set ++ ++# ++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs ++# ++CONFIG_SCSI_MULTI_LUN=y ++# CONFIG_SCSI_CONSTANTS is not set ++# CONFIG_SCSI_LOGGING is not set ++# CONFIG_SCSI_SCAN_ASYNC is not set ++CONFIG_SCSI_WAIT_SCAN=m ++ ++# ++# SCSI Transports ++# ++# CONFIG_SCSI_SPI_ATTRS is not set ++# CONFIG_SCSI_FC_ATTRS is not set ++# CONFIG_SCSI_ISCSI_ATTRS is not set ++# CONFIG_SCSI_SAS_LIBSAS is not set ++# CONFIG_SCSI_SRP_ATTRS is not set ++# CONFIG_SCSI_LOWLEVEL is not set ++# CONFIG_ATA is not set ++# CONFIG_MD is not set ++CONFIG_NETDEVICES=y ++# CONFIG_NETDEVICES_MULTIQUEUE is not set ++# CONFIG_DUMMY is not set ++# CONFIG_BONDING is not set ++# CONFIG_MACVLAN is not set ++# CONFIG_EQUALIZER is not set ++# CONFIG_TUN is not set ++# CONFIG_VETH is not set ++# CONFIG_PHYLIB is not set ++CONFIG_NET_ETHERNET=y ++CONFIG_MII=y ++CONFIG_FEC_548x=y ++CONFIG_FEC_548x_AUTO_NEGOTIATION=y ++# CONFIG_FEC_548x_ENABLE_FEC2 is not set ++# CONFIG_ENC28J60 is not set ++# CONFIG_IBM_NEW_EMAC_ZMII is not set ++# CONFIG_IBM_NEW_EMAC_RGMII is not set ++# CONFIG_IBM_NEW_EMAC_TAH is not set ++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set ++# CONFIG_B44 is not set ++# CONFIG_NETDEV_1000 is not set ++# CONFIG_NETDEV_10000 is not set ++ ++# ++# Wireless LAN ++# ++# CONFIG_WLAN_PRE80211 is not set ++# CONFIG_WLAN_80211 is not set ++# CONFIG_WAN is not set ++# CONFIG_PPP is not set ++# CONFIG_SLIP is not set ++# CONFIG_NETCONSOLE is not set ++# CONFIG_NETPOLL is not set ++# CONFIG_NET_POLL_CONTROLLER is not set ++# CONFIG_ISDN is not set ++# CONFIG_PHONE is not set ++ ++# ++# Input device support ++# ++CONFIG_INPUT=y ++# CONFIG_INPUT_FF_MEMLESS is not set ++# CONFIG_INPUT_POLLDEV is not set ++ ++# ++# Userland interfaces ++# ++CONFIG_INPUT_MOUSEDEV=y ++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set ++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 ++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 ++# CONFIG_INPUT_JOYDEV is not set ++CONFIG_INPUT_EVDEV=y ++# CONFIG_INPUT_EVBUG is not set ++ ++# ++# Input Device Drivers ++# ++CONFIG_INPUT_KEYBOARD=y ++# CONFIG_KEYBOARD_ATKBD is not set ++# CONFIG_KEYBOARD_SUNKBD is not set ++# CONFIG_KEYBOARD_LKKBD is not set ++# CONFIG_KEYBOARD_XTKBD is not set ++# CONFIG_KEYBOARD_NEWTON is not set ++# CONFIG_KEYBOARD_STOWAWAY is not set ++# CONFIG_INPUT_MOUSE is not set ++# CONFIG_INPUT_JOYSTICK is not set ++# CONFIG_INPUT_TABLET is not set ++# CONFIG_INPUT_TOUCHSCREEN is not set ++# CONFIG_INPUT_MISC is not set ++ ++# ++# Hardware I/O ports ++# ++CONFIG_SERIO=y ++CONFIG_SERIO_SERPORT=y ++# CONFIG_SERIO_RAW is not set ++# CONFIG_GAMEPORT is not set ++ ++# ++# Character devices ++# ++CONFIG_VT=y ++CONFIG_VT_CONSOLE=y ++CONFIG_HW_CONSOLE=y ++# CONFIG_VT_HW_CONSOLE_BINDING is not set ++# CONFIG_SERIAL_NONSTANDARD is not set ++ ++# ++# Serial drivers ++# ++# CONFIG_SERIAL_8250 is not set ++ ++# ++# Non-8250 serial port support ++# ++CONFIG_SERIAL_COLDFIRE=y ++# CONFIG_SERIAL_COLDFIRE_IRDA is not set ++# CONFIG_SERIAL_MCF is not set ++CONFIG_UNIX98_PTYS=y ++# CONFIG_LEGACY_PTYS is not set ++# CONFIG_IPMI_HANDLER is not set ++# CONFIG_HW_RANDOM is not set ++# CONFIG_GEN_RTC is not set ++# CONFIG_R3964 is not set ++# CONFIG_RAW_DRIVER is not set ++# CONFIG_TCG_TPM is not set ++CONFIG_I2C=y ++CONFIG_I2C_BOARDINFO=y ++# CONFIG_I2C_CHARDEV is not set ++ ++# ++# I2C Algorithms ++# ++# CONFIG_I2C_ALGOBIT is not set ++# CONFIG_I2C_ALGOPCF is not set ++# CONFIG_I2C_ALGOPCA is not set ++ ++# ++# I2C Hardware Bus support ++# ++CONFIG_I2C_MCF548x=y ++# CONFIG_I2C_MCF is not set ++# CONFIG_I2C_OCORES is not set ++# CONFIG_I2C_PARPORT_LIGHT is not set ++# CONFIG_I2C_SIMTEC is not set ++# CONFIG_I2C_TAOS_EVM is not set ++# CONFIG_I2C_STUB is not set ++ ++# ++# Miscellaneous I2C Chip support ++# ++# CONFIG_DS1682 is not set ++# CONFIG_SENSORS_EEPROM is not set ++# CONFIG_SENSORS_PCF8574 is not set ++# CONFIG_PCF8575 is not set ++# CONFIG_SENSORS_PCF8591 is not set ++# CONFIG_TPS65010 is not set ++# CONFIG_SENSORS_MAX6875 is not set ++# CONFIG_SENSORS_TSL2550 is not set ++# CONFIG_I2C_DEBUG_CORE is not set ++# CONFIG_I2C_DEBUG_ALGO is not set ++# CONFIG_I2C_DEBUG_BUS is not set ++# CONFIG_I2C_DEBUG_CHIP is not set ++ ++# ++# SPI support ++# ++CONFIG_SPI=y ++CONFIG_SPI_DEBUG=y ++# CONFIG_COLDFIRE_EDMA is not set ++CONFIG_SPI_MASTER=y ++ ++# ++# SPI Master Controller Drivers ++# ++# CONFIG_SPI_BITBANG is not set ++CONFIG_SPI_COLDFIRE=y ++ ++# ++# SPI Protocol Masters ++# ++# CONFIG_SPI_AT25 is not set ++# CONFIG_SPI_SPIDEV is not set ++# CONFIG_SPI_TLE62X0 is not set ++# CONFIG_SPI_COLDFIRE_SSI_AUDIO is not set ++# CONFIG_W1 is not set ++# CONFIG_POWER_SUPPLY is not set ++# CONFIG_HWMON is not set ++# CONFIG_THERMAL is not set ++# CONFIG_WATCHDOG is not set ++ ++# ++# Sonics Silicon Backplane ++# ++CONFIG_SSB_POSSIBLE=y ++# CONFIG_SSB is not set ++ ++# ++# Multifunction device drivers ++# ++# CONFIG_MFD_SM501 is not set ++ ++# ++# Multimedia devices ++# ++# CONFIG_VIDEO_DEV is not set ++# CONFIG_DVB_CORE is not set ++CONFIG_DAB=y ++ ++# ++# Graphics support ++# ++# CONFIG_VGASTATE is not set ++CONFIG_VIDEO_OUTPUT_CONTROL=m ++# CONFIG_FB is not set ++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set ++ ++# ++# Display device support ++# ++# CONFIG_DISPLAY_SUPPORT is not set ++ ++# ++# Console display driver support ++# ++CONFIG_DUMMY_CONSOLE=y ++ ++# ++# Sound ++# ++# CONFIG_SOUND is not set ++CONFIG_HID_SUPPORT=y ++CONFIG_HID=y ++CONFIG_HID_DEBUG=y ++# CONFIG_HIDRAW is not set ++# CONFIG_USB_SUPPORT is not set ++# CONFIG_MMC is not set ++# CONFIG_MEMSTICK is not set ++# CONFIG_NEW_LEDS is not set ++# CONFIG_RTC_CLASS is not set ++ ++# ++# Userspace I/O ++# ++# CONFIG_UIO is not set ++ ++# ++# Character devices ++# ++# CONFIG_SERIAL_CONSOLE is not set ++ ++# ++# File systems ++# ++CONFIG_EXT2_FS=y ++# CONFIG_EXT2_FS_XATTR is not set ++# CONFIG_EXT2_FS_XIP is not set ++CONFIG_EXT3_FS=y ++CONFIG_EXT3_FS_XATTR=y ++# CONFIG_EXT3_FS_POSIX_ACL is not set ++# CONFIG_EXT3_FS_SECURITY is not set ++# CONFIG_EXT4DEV_FS is not set ++CONFIG_JBD=y ++CONFIG_FS_MBCACHE=y ++# CONFIG_REISERFS_FS is not set ++# CONFIG_JFS_FS is not set ++# CONFIG_FS_POSIX_ACL is not set ++# CONFIG_XFS_FS is not set ++# CONFIG_GFS2_FS is not set ++# CONFIG_OCFS2_FS is not set ++CONFIG_DNOTIFY=y ++# CONFIG_INOTIFY is not set ++# CONFIG_QUOTA is not set ++# CONFIG_AUTOFS_FS is not set ++# CONFIG_AUTOFS4_FS is not set ++# CONFIG_FUSE_FS is not set ++ ++# ++# CD-ROM/DVD Filesystems ++# ++# CONFIG_ISO9660_FS is not set ++# CONFIG_UDF_FS is not set ++ ++# ++# DOS/FAT/NT Filesystems ++# ++CONFIG_FAT_FS=y ++CONFIG_MSDOS_FS=y ++CONFIG_VFAT_FS=y ++CONFIG_FAT_DEFAULT_CODEPAGE=437 ++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" ++CONFIG_NTFS_FS=y ++# CONFIG_NTFS_DEBUG is not set ++CONFIG_NTFS_RW=y ++ ++# ++# Pseudo filesystems ++# ++CONFIG_PROC_FS=y ++# CONFIG_PROC_KCORE is not set ++CONFIG_PROC_SYSCTL=y ++CONFIG_SYSFS=y ++CONFIG_TMPFS=y ++# CONFIG_TMPFS_POSIX_ACL is not set ++# CONFIG_HUGETLB_PAGE is not set ++# CONFIG_CONFIGFS_FS is not set ++ ++# ++# Miscellaneous filesystems ++# ++# CONFIG_ADFS_FS is not set ++# CONFIG_AFFS_FS is not set ++# CONFIG_HFS_FS is not set ++# CONFIG_HFSPLUS_FS is not set ++# CONFIG_BEFS_FS is not set ++# CONFIG_BFS_FS is not set ++# CONFIG_EFS_FS is not set ++# CONFIG_CRAMFS is not set ++# CONFIG_VXFS_FS is not set ++CONFIG_MINIX_FS=y ++# CONFIG_HPFS_FS is not set ++# CONFIG_QNX4FS_FS is not set ++CONFIG_ROMFS_FS=y ++# CONFIG_SYSV_FS is not set ++# CONFIG_UFS_FS is not set ++CONFIG_NETWORK_FILESYSTEMS=y ++CONFIG_NFS_FS=y ++# CONFIG_NFS_V3 is not set ++# CONFIG_NFS_V4 is not set ++# CONFIG_NFS_DIRECTIO is not set ++# CONFIG_NFSD is not set ++CONFIG_ROOT_NFS=y ++CONFIG_LOCKD=y ++CONFIG_NFS_COMMON=y ++CONFIG_SUNRPC=y ++# CONFIG_SUNRPC_BIND34 is not set ++# CONFIG_RPCSEC_GSS_KRB5 is not set ++# CONFIG_RPCSEC_GSS_SPKM3 is not set ++# CONFIG_SMB_FS is not set ++# CONFIG_CIFS is not set ++# CONFIG_NCP_FS is not set ++# CONFIG_CODA_FS is not set ++# CONFIG_AFS_FS is not set ++ ++# ++# Partition Types ++# ++CONFIG_PARTITION_ADVANCED=y ++# CONFIG_ACORN_PARTITION is not set ++# CONFIG_OSF_PARTITION is not set ++# CONFIG_AMIGA_PARTITION is not set ++# CONFIG_ATARI_PARTITION is not set ++# CONFIG_MAC_PARTITION is not set ++CONFIG_MSDOS_PARTITION=y ++# CONFIG_BSD_DISKLABEL is not set ++# CONFIG_MINIX_SUBPARTITION is not set ++# CONFIG_SOLARIS_X86_PARTITION is not set ++# CONFIG_UNIXWARE_DISKLABEL is not set ++# CONFIG_LDM_PARTITION is not set ++# CONFIG_SGI_PARTITION is not set ++# CONFIG_ULTRIX_PARTITION is not set ++# CONFIG_SUN_PARTITION is not set ++# CONFIG_KARMA_PARTITION is not set ++# CONFIG_EFI_PARTITION is not set ++# CONFIG_SYSV68_PARTITION is not set ++CONFIG_NLS=y ++CONFIG_NLS_DEFAULT="iso8859-1" ++CONFIG_NLS_CODEPAGE_437=y ++# CONFIG_NLS_CODEPAGE_737 is not set ++# CONFIG_NLS_CODEPAGE_775 is not set ++# CONFIG_NLS_CODEPAGE_850 is not set ++# CONFIG_NLS_CODEPAGE_852 is not set ++# CONFIG_NLS_CODEPAGE_855 is not set ++# CONFIG_NLS_CODEPAGE_857 is not set ++# CONFIG_NLS_CODEPAGE_860 is not set ++# CONFIG_NLS_CODEPAGE_861 is not set ++# CONFIG_NLS_CODEPAGE_862 is not set ++# CONFIG_NLS_CODEPAGE_863 is not set ++# CONFIG_NLS_CODEPAGE_864 is not set ++# CONFIG_NLS_CODEPAGE_865 is not set ++# CONFIG_NLS_CODEPAGE_866 is not set ++# CONFIG_NLS_CODEPAGE_869 is not set ++# CONFIG_NLS_CODEPAGE_936 is not set ++# CONFIG_NLS_CODEPAGE_950 is not set ++# CONFIG_NLS_CODEPAGE_932 is not set ++# CONFIG_NLS_CODEPAGE_949 is not set ++# CONFIG_NLS_CODEPAGE_874 is not set ++# CONFIG_NLS_ISO8859_8 is not set ++# CONFIG_NLS_CODEPAGE_1250 is not set ++# CONFIG_NLS_CODEPAGE_1251 is not set ++# CONFIG_NLS_ASCII is not set ++CONFIG_NLS_ISO8859_1=y ++# CONFIG_NLS_ISO8859_2 is not set ++# CONFIG_NLS_ISO8859_3 is not set ++# CONFIG_NLS_ISO8859_4 is not set ++# CONFIG_NLS_ISO8859_5 is not set ++# CONFIG_NLS_ISO8859_6 is not set ++# CONFIG_NLS_ISO8859_7 is not set ++# CONFIG_NLS_ISO8859_9 is not set ++# CONFIG_NLS_ISO8859_13 is not set ++# CONFIG_NLS_ISO8859_14 is not set ++# CONFIG_NLS_ISO8859_15 is not set ++# CONFIG_NLS_KOI8_R is not set ++# CONFIG_NLS_KOI8_U is not set ++CONFIG_NLS_UTF8=y ++# CONFIG_DLM is not set ++ ++# ++# Kernel hacking ++# ++# CONFIG_PRINTK_TIME is not set ++CONFIG_ENABLE_WARN_DEPRECATED=y ++# CONFIG_ENABLE_MUST_CHECK is not set ++# CONFIG_MAGIC_SYSRQ is not set ++# CONFIG_UNUSED_SYMBOLS is not set ++# CONFIG_DEBUG_FS is not set ++# CONFIG_HEADERS_CHECK is not set ++CONFIG_DEBUG_KERNEL=y ++CONFIG_DETECT_SOFTLOCKUP=y ++CONFIG_SCHED_DEBUG=y ++# CONFIG_SCHEDSTATS is not set ++# CONFIG_TIMER_STATS is not set ++CONFIG_DEBUG_SLAB=y ++# CONFIG_DEBUG_SLAB_LEAK is not set ++# CONFIG_DEBUG_RT_MUTEXES is not set ++# CONFIG_RT_MUTEX_TESTER is not set ++# CONFIG_DEBUG_SPINLOCK is not set ++# CONFIG_DEBUG_MUTEXES is not set ++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set ++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set ++# CONFIG_DEBUG_KOBJECT is not set ++CONFIG_DEBUG_BUGVERBOSE=y ++CONFIG_DEBUG_INFO=y ++# CONFIG_DEBUG_VM is not set ++# CONFIG_DEBUG_LIST is not set ++# CONFIG_DEBUG_SG is not set ++# CONFIG_FRAME_POINTER is not set ++# CONFIG_BOOT_PRINTK_DELAY is not set ++# CONFIG_RCU_TORTURE_TEST is not set ++# CONFIG_BACKTRACE_SELF_TEST is not set ++# CONFIG_FAULT_INJECTION is not set ++# CONFIG_SAMPLES is not set ++CONFIG_BOOTPARAM=y ++CONFIG_BOOTPARAM_STRING="root=/dev/nfs rw nfsroot=172.27.163.2:/tftpboot/ltib ip=172.27.163.3:172.27.163.2:172.27.255.254:255.255.0.0::eth0:off mtdparts=phys_mapped_flash:16m(User)" ++ ++# ++# Security options ++# ++# CONFIG_KEYS is not set ++# CONFIG_SECURITY is not set ++# CONFIG_SECURITY_FILE_CAPABILITIES is not set ++CONFIG_CRYPTO=y ++CONFIG_CRYPTO_ALGAPI=y ++CONFIG_CRYPTO_AEAD=y ++CONFIG_CRYPTO_BLKCIPHER=y ++# CONFIG_CRYPTO_SEQIV is not set ++CONFIG_CRYPTO_HASH=y ++CONFIG_CRYPTO_MANAGER=y ++CONFIG_CRYPTO_HMAC=y ++# CONFIG_CRYPTO_XCBC is not set ++# CONFIG_CRYPTO_NULL is not set ++# CONFIG_CRYPTO_MD4 is not set ++CONFIG_CRYPTO_MD5=y ++CONFIG_CRYPTO_SHA1=y ++# CONFIG_CRYPTO_SHA256 is not set ++# CONFIG_CRYPTO_SHA512 is not set ++# CONFIG_CRYPTO_WP512 is not set ++# CONFIG_CRYPTO_TGR192 is not set ++# CONFIG_CRYPTO_GF128MUL is not set ++# CONFIG_CRYPTO_ECB is not set ++CONFIG_CRYPTO_CBC=y ++# CONFIG_CRYPTO_PCBC is not set ++# CONFIG_CRYPTO_LRW is not set ++# CONFIG_CRYPTO_XTS is not set ++# CONFIG_CRYPTO_CTR is not set ++# CONFIG_CRYPTO_GCM is not set ++# CONFIG_CRYPTO_CCM is not set ++# CONFIG_CRYPTO_CRYPTD is not set ++CONFIG_CRYPTO_DES=y ++# CONFIG_CRYPTO_FCRYPT is not set ++# CONFIG_CRYPTO_BLOWFISH is not set ++# CONFIG_CRYPTO_TWOFISH is not set ++# CONFIG_CRYPTO_SERPENT is not set ++# CONFIG_CRYPTO_AES is not set ++# CONFIG_CRYPTO_CAST5 is not set ++# CONFIG_CRYPTO_CAST6 is not set ++# CONFIG_CRYPTO_TEA is not set ++# CONFIG_CRYPTO_ARC4 is not set ++# CONFIG_CRYPTO_KHAZAD is not set ++# CONFIG_CRYPTO_ANUBIS is not set ++# CONFIG_CRYPTO_SEED is not set ++# CONFIG_CRYPTO_SALSA20 is not set ++# CONFIG_CRYPTO_DEFLATE is not set ++# CONFIG_CRYPTO_MICHAEL_MIC is not set ++# CONFIG_CRYPTO_CRC32C is not set ++# CONFIG_CRYPTO_CAMELLIA is not set ++CONFIG_CRYPTO_TEST=m ++CONFIG_CRYPTO_AUTHENC=y ++# CONFIG_CRYPTO_LZO is not set ++# CONFIG_CRYPTO_HW is not set ++ ++# ++# Library routines ++# ++CONFIG_BITREVERSE=y ++CONFIG_CRC_CCITT=y ++CONFIG_CRC16=y ++# CONFIG_CRC_ITU_T is not set ++CONFIG_CRC32=y ++# CONFIG_CRC7 is not set ++CONFIG_LIBCRC32C=y ++CONFIG_PLIST=y ++CONFIG_HAS_IOMEM=y ++CONFIG_HAS_IOPORT=y ++CONFIG_HAS_DMA=y +--- a/arch/m68k/Kconfig ++++ b/arch/m68k/Kconfig +@@ -11,6 +11,14 @@ config MMU + bool + default y + ++config GENERIC_TIME ++ bool ++ default n ++ ++config GENERIC_CLOCKEVENTS ++ bool ++ default n ++ + config RWSEM_GENERIC_SPINLOCK + bool + default y +@@ -48,7 +56,7 @@ config ARCH_MAY_HAVE_PC_FDC + default y + + config NO_IOPORT +- def_bool y ++ def_bool !(M5445X || M547X_8X) + + config NO_DMA + def_bool SUN3 +@@ -119,6 +127,29 @@ config SUN3 + + If you don't want to compile a kernel exclusively for a Sun 3, say N. + ++config COLDFIRE ++ bool "ColdFire V4e support" ++ default y ++ select CFV4E ++ help ++ Say Y if you want to build a kernel to run on one of the ColdFire ++ V4e boards. ++ ++config CFV4E ++ bool ++ depends on COLDFIRE ++ select MMU_CFV4E if MMU ++ default y ++ ++config MCD_DMA ++ bool "ColdFire MCD DMA support" ++ depends on M547X_8X ++ default y ++ help ++ This enables support for the ColdFire 547x/548x family ++ multichannel DMA support. Many drivers need it. ++ If you want it, say Y ++ + config AMIGA + bool "Amiga support" + depends on !MMU_SUN3 +@@ -144,9 +175,9 @@ config HADES + to use this kernel on a Hades, say Y here; otherwise say N. + + config PCI +- bool +- depends on HADES +- default y ++ bool "PCI bus support" ++ depends on HADES || M54455 || M547X_8X ++ default n + help + Find out whether you have a PCI motherboard. PCI is the name of a + bus system, i.e. the way the CPU talks to the other stuff inside +@@ -294,14 +325,142 @@ config M68060 + If you anticipate running this kernel on a computer with a MC68060 + processor, say Y. Otherwise, say N. + ++config M5445X ++ bool "MCF5445x support" ++ depends on COLDFIRE ++ help ++ This option will add support for the MCF5445 processor with mmu. ++ ++config M54451 ++ bool ++ depends on M5445X ++ default n ++ ++config M54455 ++ bool ++ depends on M5445X ++ default n ++ ++choice ++ prompt "Model" ++ depends on M5445X ++ default M54451EVB ++ config M54451EVB ++ bool "M54451EVB" ++ select M54451 ++ config M54455EVB ++ bool "M54455EVB" ++ select M54455 ++endchoice ++ ++ ++config M547X_8X ++ bool "MCF547x/MCF548x support" ++ depends on COLDFIRE ++ help ++ This option will add support for the MCF547x/MCF548x processor with mmu. ++ ++config M547X ++ bool ++ depends on M547X_8X ++ default n ++ ++config M548X ++ bool ++ depends on M547X_8X ++ default n ++ ++choice ++ prompt "Model" ++ depends on M547X_8X ++ default M5485CFE ++ config M5475AFE ++ bool "MCF5475AFE" ++ select M547X ++ config M5475BFE ++ bool "MCF5475BFE" ++ select M547X ++ config M5475CFE ++ bool "MCF5475CFE" ++ select M547X ++ config M5475DFE ++ bool "MCF5475DFE" ++ select M547X ++ config M5475EFE ++ bool "MCF5475EFE" ++ select M547X ++ config M5475FFE ++ bool "MCF5475FFE" ++ select M547X ++ ++ config M5485AFE ++ bool "MCF5485AFE" ++ select M548X ++ config M5485BFE ++ bool "MCF5485BFE" ++ select M548X ++ config M5485CFE ++ bool "MCF5485CFE" ++ select M548X ++ config M5485DFE ++ bool "MCF5485DFE" ++ select M548X ++ config M5485EFE ++ bool "MCF5485EFE" ++ select M548X ++ config M5485FFE ++ bool "MCF5485FFE" ++ select M548X ++ ++endchoice ++ ++config MCFCLK ++ int ++ default 266666666 if M54455EVB ++ default 240000000 if M54451EVB ++ default 266000000 if M547X ++ default 200000000 if M548X ++ help ++ Coldfire System clock. ++ ++config MCF_USER_HALT ++ bool "Coldfire User Halt Enable" ++ depends on M5445X || M547X_8X ++ default n ++ help ++ Enables the HALT instruction in User Mode. ++ + config MMU_MOTOROLA + bool +- depends on MMU && !MMU_SUN3 ++ depends on MMU && !MMU_SUN3 && !COLDFIRE + default y + + config MMU_SUN3 + bool + ++config MMU_CFV4E ++ bool ++ ++config SDRAM_BASE ++ hex ++ depends on COLDFIRE ++ default 0x40000000 if M5445X ++ default 0x00000000 if M547X_8X ++ ++config SDRAM_SIZE ++ hex ++ depends on COLDFIRE ++ default 0x08000000 if M54451EVB ++ default 0x10000000 if M54455EVB ++ default 0x04000000 if M547X_8X ++ ++config NOR_FLASH_BASE ++ hex "NOR Flash Base Address" ++ depends on COLDFIRE ++ default 0x00000000 if M54451EVB ++ default 0x00000000 if M54455EVB ++ default 0xE0000000 if M547X_8X ++ + config M68KFPU_EMU + bool "Math emulation support (EXPERIMENTAL)" + depends on EXPERIMENTAL +@@ -468,6 +627,14 @@ config ZONE_DMA + source "drivers/pci/Kconfig" + + source "drivers/zorro/Kconfig" ++endmenu ++ ++menu "Power management options" ++ ++config PM ++ bool "Power Management support" ++ help ++ Support processor power management modes + + endmenu + +@@ -647,7 +814,7 @@ config DN_SERIAL + + config SERIAL_CONSOLE + bool "Support for serial port console" +- depends on (AMIGA || ATARI || MAC || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_SCC=y || ATARI_MIDI=y || MAC_SCC=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL) ++ depends on (AMIGA || ATARI || MAC || SUN3 || SUN3X || VME || APOLLO || COLDFIRE) && (ATARI_MFPSER=y || ATARI_SCC=y || ATARI_MIDI=y || MAC_SCC=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL || SERIAL_COLDFIRE) + ---help--- + If you say Y here, it will be possible to use a serial port as the + system console (the system console is the device which receives all +--- a/arch/m68k/Kconfig.debug ++++ b/arch/m68k/Kconfig.debug +@@ -2,4 +2,13 @@ menu "Kernel hacking" + + source "lib/Kconfig.debug" + ++config BOOTPARAM ++ bool 'Compiled-in Kernel Boot Parameter' ++ depends on COLDFIRE ++ ++config BOOTPARAM_STRING ++ string 'Kernel Boot Parameter' ++ default 'console=ttyS0,115200' ++ depends on BOOTPARAM ++ + endmenu +--- a/arch/m68k/kernel/asm-offsets.c ++++ b/arch/m68k/kernel/asm-offsets.c +@@ -58,8 +58,15 @@ int main(void) + DEFINE(PT_A2, offsetof(struct pt_regs, a2)); + DEFINE(PT_PC, offsetof(struct pt_regs, pc)); + DEFINE(PT_SR, offsetof(struct pt_regs, sr)); ++#ifdef CONFIG_COLDFIRE ++ /* Need to get the context out of struct mm for ASID setting */ ++ DEFINE(MM_CONTEXT, offsetof(struct mm_struct, context)); ++ /* Coldfire exception frame has vector *before* pc */ ++ DEFINE(PT_VECTOR, offsetof(struct pt_regs, pc) - 4); ++#else + /* bitfields are a bit difficult */ + DEFINE(PT_VECTOR, offsetof(struct pt_regs, pc) + 4); ++#endif + + /* offsets into the irq_handler struct */ + DEFINE(IRQ_HANDLER, offsetof(struct irq_node, handler)); +--- /dev/null ++++ b/arch/m68k/kernel/bios32_mcf548x.c +@@ -0,0 +1,631 @@ ++/* ++ * bios32.c - PCI BIOS functions for m68k systems. ++ * ++ * Written by Wout Klaren. ++ * ++ * Based on the DEC Alpha bios32.c by Dave Rusling and David Mosberger. ++ */ ++#include <linux/init.h> ++#include <linux/kernel.h> ++ ++#if 0 ++# define DBG_DEVS(args) printk args ++#else ++# define DBG_DEVS(args) ++#endif ++ ++#ifdef CONFIG_PCI ++ ++/* ++ * PCI support for Linux/m68k. Currently only the Hades is supported. ++ * ++ * The support for PCI bridges in the DEC Alpha version has ++ * been removed in this version. ++ */ ++ ++#include <linux/pci.h> ++#include <linux/slab.h> ++#include <linux/mm.h> ++ ++#include <asm/io.h> ++#include <asm/pci.h> ++#include <asm/uaccess.h> ++ ++#define KB 1024 ++#define MB (1024*KB) ++#define GB (1024*MB) ++ ++#define MAJOR_REV 0 ++#define MINOR_REV 5 ++ ++/* ++ * Align VAL to ALIGN, which must be a power of two. ++ */ ++ ++#define MAX(val1, val2) (((val1) > (val2)) ? val1 : val2) ++ ++/* ++ * Offsets relative to the I/O and memory base addresses from where resources ++ * are allocated. ++ */ ++ ++#ifdef CONFIG_COLDFIRE ++#define IO_ALLOC_OFFSET 0x00000100 ++#define MEM_ALLOC_OFFSET 0x00000000 ++#else /* CONFIG_COLDFIRE */ ++#define IO_ALLOC_OFFSET 0x00004000 ++#define MEM_ALLOC_OFFSET 0x04000000 ++#endif /* CONFIG_COLDFIRE */ ++ ++/* ++ * Declarations of hardware specific initialisation functions. ++ */ ++ ++extern struct pci_bus_info *init_hades_pci(void); ++ ++/* ++ * Bus info structure of the PCI bus. A pointer to this structure is ++ * put in the sysdata member of the pci_bus structure. ++ */ ++ ++static struct pci_bus_info *bus_info; ++ ++static int pci_modify = 1; /* If set, layout the PCI bus ourself. */ ++static int skip_vga; /* If set do not modify base addresses ++ of vga cards.*/ ++static int disable_pci_burst; /* If set do not allow PCI bursts. */ ++ ++static unsigned int io_base; ++static unsigned int mem_base; ++ ++/* ++ * static void disable_dev(struct pci_dev *dev) ++ * ++ * Disable PCI device DEV so that it does not respond to I/O or memory ++ * accesses. ++ * ++ * Parameters: ++ * ++ * dev - device to disable. ++ */ ++ ++static void __init disable_dev(struct pci_dev *dev) ++{ ++ unsigned short cmd; ++ ++ if (((dev->class >> 8 == PCI_CLASS_NOT_DEFINED_VGA) || ++ (dev->class >> 8 == PCI_CLASS_DISPLAY_VGA) || ++ (dev->class >> 8 == PCI_CLASS_DISPLAY_XGA)) && skip_vga) ++ return; ++ ++ pci_read_config_word(dev, PCI_COMMAND, &cmd); ++ ++ cmd &= (~PCI_COMMAND_IO & ~PCI_COMMAND_MEMORY & ~PCI_COMMAND_MASTER); ++ pci_write_config_word(dev, PCI_COMMAND, cmd); ++} ++ ++/* Stolen from pcibios_enable_resources/i386 */ ++int pcibios_enable_device(struct pci_dev *dev, int mask) ++{ ++ u16 cmd, old_cmd; ++ int idx; ++ struct resource *r; ++ ++ pci_read_config_word(dev, PCI_COMMAND, &cmd); ++ old_cmd = cmd; ++ for(idx=0; idx<6; idx++) { ++ /* Only set up the requested stuff */ ++ if (!(mask & (1<<idx))) ++ continue; ++ ++ r = &dev->resource[idx]; ++ if (!r->start && r->end) { ++ printk("PCI: Device %s not available because" ++ " of resource collisions\n", dev->dev.bus_id); ++ return -EINVAL; ++ } ++ if (r->flags & IORESOURCE_IO) ++ cmd |= PCI_COMMAND_IO; ++ if (r->flags & IORESOURCE_MEM) ++ cmd |= PCI_COMMAND_MEMORY; ++ } ++ if (dev->resource[PCI_ROM_RESOURCE].start) ++ cmd |= PCI_COMMAND_MEMORY; ++ if (cmd != old_cmd) { ++ printk("PCI: Enabling device %s (%04x -> %04x)\n", dev->dev.bus_id, old_cmd, cmd); ++ pci_write_config_word(dev, PCI_COMMAND, cmd); ++ } ++ return 0; ++} ++ ++/* ++ * static void layout_dev(struct pci_dev *dev) ++ * ++ * Layout memory and I/O for a device. ++ * ++ * Parameters: ++ * ++ * device - device to layout memory and I/O for. ++ */ ++ ++static void __init layout_dev(struct pci_dev *dev) ++{ ++ unsigned short cmd; ++ unsigned int base, mask, size, reg; ++ unsigned int alignto; ++ int i; ++ ++ /* ++ * Skip video cards if requested. ++ */ ++ if (((dev->class >> 8 == PCI_CLASS_NOT_DEFINED_VGA) || ++ (dev->class >> 8 == PCI_CLASS_DISPLAY_VGA) || ++ (dev->class >> 8 == PCI_CLASS_DISPLAY_XGA)) && skip_vga){ ++ printk("%s: VGA\n",__FUNCTION__); ++ return; ++ } ++ pci_read_config_word(dev, PCI_COMMAND, &cmd); ++ ++ for (reg = PCI_BASE_ADDRESS_0, i = 0; reg <= PCI_BASE_ADDRESS_5; reg += 4, i++) ++ { ++ /* ++ * Figure out how much space and of what type this ++ * device wants. ++ */ ++ ++ pci_write_config_dword(dev, reg, 0xffffffff); ++ pci_read_config_dword(dev, reg, &base); ++ if (!base) ++ { ++ /* this base-address register is unused */ ++ dev->resource[i].start = 0; ++ dev->resource[i].end = 0; ++ dev->resource[i].flags = 0; ++ continue; ++ } ++ ++ /* ++ * We've read the base address register back after ++ * writing all ones and so now we must decode it. ++ */ ++ ++ if (base & PCI_BASE_ADDRESS_SPACE_IO) ++ { ++ /* ++ * I/O space base address register. ++ */ ++ ++ cmd |= PCI_COMMAND_IO; ++ ++ base &= PCI_BASE_ADDRESS_IO_MASK; ++ mask = (~base << 1) | 0x1; ++ size = (mask & base) & 0xffffffff; ++ ++ /* ++ * Align to multiple of size of minimum base. ++ */ ++ ++#ifdef CONFIG_COLDFIRE ++ alignto = MAX(PAGE_SIZE, size) ; ++#else /* CONFIG_COLDFIRE */ ++ alignto = MAX(0x040, size) ; ++#endif /* CONFIG_COLDFIRE */ ++ base = ALIGN(io_base, alignto); ++ io_base = base + size; ++ pci_write_config_dword(dev, reg, base | PCI_BASE_ADDRESS_SPACE_IO); ++ ++ dev->resource[i].start = base; ++ dev->resource[i].end = dev->resource[i].start + size - 1; ++ dev->resource[i].flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO; ++ ++ DBG_DEVS(("layout_dev: IO address: %x\n", base)); ++ } ++ else ++ { ++ unsigned int type; ++ ++ /* ++ * Memory space base address register. ++ */ ++ ++ cmd |= PCI_COMMAND_MEMORY; ++ type = base & PCI_BASE_ADDRESS_MEM_TYPE_MASK; ++ base &= PCI_BASE_ADDRESS_MEM_MASK; ++ mask = (~base << 1) | 0x1; ++ size = (mask & base) & 0xffffffff; ++ switch (type) ++ { ++ case PCI_BASE_ADDRESS_MEM_TYPE_32: ++ case PCI_BASE_ADDRESS_MEM_TYPE_64: ++ break; ++ ++ case PCI_BASE_ADDRESS_MEM_TYPE_1M: ++ printk("bios32 WARNING: slot %d, function %d " ++ "requests memory below 1MB---don't " ++ "know how to do that.\n", ++ PCI_SLOT(dev->devfn), ++ PCI_FUNC(dev->devfn)); ++ continue; ++ } ++ DBG_DEVS(("%s MEM: base %x,type %x,mask %x,size %x\n", ++ __FUNCTION__, base, type, mask, size)); ++ /* ++ * Align to multiple of size of minimum base. ++ */ ++ ++ alignto = max_t(unsigned int, 0x1000, size); ++ base = ALIGN(mem_base, alignto); ++ mem_base = base + size; ++ pci_write_config_dword(dev, reg, base); ++ ++ dev->resource[i].start = base; ++ dev->resource[i].end = dev->resource[i].start + size - 1; ++ dev->resource[i].flags = IORESOURCE_MEM; ++ DBG_DEVS(("%s MEM :base %x,size %x\n", ++ __FUNCTION__, base, size)); ++ if (type == PCI_BASE_ADDRESS_MEM_TYPE_64) ++ { ++ /* ++ * 64-bit address, set the highest 32 bits ++ * to zero. ++ */ ++ ++ reg += 4; ++ pci_write_config_dword(dev, reg, 0); ++ ++ i++; ++ dev->resource[i].start = 0; ++ dev->resource[i].end = 0; ++ dev->resource[i].flags = 0; ++ printk("%s:type == 64\n",__FUNCTION__); ++ } ++ } ++ } ++ ++ /* ++ * Enable device: ++ */ ++ ++ if (dev->class >> 8 == PCI_CLASS_NOT_DEFINED || ++ dev->class >> 8 == PCI_CLASS_NOT_DEFINED_VGA || ++ dev->class >> 8 == PCI_CLASS_DISPLAY_VGA || ++ dev->class >> 8 == PCI_CLASS_DISPLAY_XGA) ++ { ++ /* ++ * All of these (may) have I/O scattered all around ++ * and may not use i/o-base address registers at all. ++ * So we just have to always enable I/O to these ++ * devices. ++ */ ++ cmd |= PCI_COMMAND_IO; ++ } ++ ++ pci_write_config_word(dev, PCI_COMMAND, cmd | PCI_COMMAND_MASTER); ++ ++ pci_write_config_byte(dev, PCI_LATENCY_TIMER, (disable_pci_burst) ? 0 : 32); ++ ++ if (bus_info != NULL) ++ bus_info->conf_device(dev); /* Machine dependent configuration. */ ++ ++ printk(KERN_INFO "layout_dev: bus %d slot 0x%x VID 0x%x DID 0x%x class 0x%x\n", ++ dev->bus->number, PCI_SLOT(dev->devfn), ++ dev->vendor, dev->device, dev->class); ++} ++ ++/* ++ * static void layout_bus(struct pci_bus *bus) ++ * ++ * Layout memory and I/O for all devices on the given bus. ++ * ++ * Parameters: ++ * ++ * bus - bus. ++ */ ++ ++static void __init layout_bus(struct pci_bus *bus) ++{ ++ unsigned int bio, bmem; ++ struct pci_dev *dev; ++ ++ DBG_DEVS(("layout_bus: starting bus %d\n", bus->number)); ++ ++ if (list_empty(&bus->devices) && list_empty(&bus->children)) ++ return; ++ ++ /* ++ * Align the current bases on appropriate boundaries (4K for ++ * IO and 1MB for memory). ++ */ ++ ++ bio = io_base = ALIGN(io_base, 4*KB); ++ bmem = mem_base = ALIGN(mem_base, 1*MB); ++ ++ /* ++ * PCI devices might have been setup by a PCI BIOS emulation ++ * running under TOS. In these cases there is a ++ * window during which two devices may have an overlapping ++ * address range. To avoid this causing trouble, we first ++ * turn off the I/O and memory address decoders for all PCI ++ * devices. They'll be re-enabled only once all address ++ * decoders are programmed consistently. ++ */ ++ ++ DBG_DEVS(("layout_bus: disable_dev for bus %d\n", bus->number)); ++ ++#ifdef NL_ORIGINAL ++ for (dev = bus->devices; dev; dev = dev->sibling) ++#else ++ dev = NULL; ++ while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) ++#endif ++ { ++ if ((dev->class >> 16 != PCI_BASE_CLASS_BRIDGE) || ++ (dev->class >> 8 == PCI_CLASS_BRIDGE_PCMCIA)) ++ disable_dev(dev); ++ } ++ ++ /* ++ * Allocate space to each device: ++ */ ++ ++ DBG_DEVS(("layout_bus: starting bus %d devices\n", bus->number)); ++ ++#ifdef NL_ORIGINAL ++ for (dev = bus->devices; dev; dev = dev->sibling) ++#else ++ dev = NULL; ++ while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) ++#endif ++ { ++ if ((dev->class >> 16 != PCI_BASE_CLASS_BRIDGE) || ++ (dev->class >> 8 == PCI_CLASS_BRIDGE_PCMCIA)) ++ layout_dev(dev); ++ } ++ ++ DBG_DEVS(("layout_bus: bus %d finished\n", bus->number)); ++} ++ ++/* ++ * static void pcibios_fixup(void) ++ * ++ * Layout memory and I/O of all devices on the PCI bus if 'pci_modify' is ++ * true. This might be necessary because not every m68k machine with a PCI ++ * bus has a PCI BIOS. This function should be called right after ++ * pci_scan_bus() in pcibios_init(). ++ */ ++ ++static void __init pcibios_fixup(void) ++{ ++ DBG_DEVS(("%s\n", __FUNCTION__)); ++ if (pci_modify) ++ { ++ /* ++ * Set base addresses for allocation of I/O and memory space. ++ */ ++ ++ io_base = bus_info->io_space.start + IO_ALLOC_OFFSET; ++ mem_base = bus_info->mem_space.start + MEM_ALLOC_OFFSET; ++ ++ /* ++ * Scan the tree, allocating PCI memory and I/O space. ++ */ ++ ++#ifdef NL_ORIGINAL ++ layout_bus(pci_bus_b(pci_root.next)); ++#else ++ layout_bus(pci_bus_b(pci_root_buses.next)); ++#endif ++ } ++ ++ /* ++ * Fix interrupt assignments, etc. ++ */ ++ ++ bus_info->fixup(pci_modify); ++} ++ ++/* ++ * static void pcibios_claim_resources(struct pci_bus *bus) ++ * ++ * Claim all resources that are assigned to devices on the given bus. ++ * ++ * Parameters: ++ * ++ * bus - bus. ++ */ ++ ++static void __init pcibios_claim_resources(struct pci_bus *bus) ++{ ++ struct pci_dev *dev; ++ int i; ++ DBG_DEVS(("%s\n", __FUNCTION__)); ++#ifdef NL_ORIGINAL ++ while (bus) ++#else ++ while ((bus = pci_find_next_bus(bus)) != NULL) ++#endif ++ { ++ ++#ifdef NL_ORIGINAL ++ for (dev = bus->devices; (dev != NULL); dev = dev->sibling) ++#else ++ dev = NULL; ++ while ((dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) ++#endif ++ { ++ for (i = 0; i < PCI_NUM_RESOURCES; i++) ++ { ++ struct resource *r = &dev->resource[i]; ++ struct resource *pr; ++ struct pci_bus_info *bus_info = ++ (struct pci_bus_info *) dev->sysdata; ++ ++ if ((r->start == 0) || (r->parent != NULL)) ++ continue; ++ ++#ifdef CONFIG_COLDFIRE ++ if (dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) ++ continue; ++#endif /* CONFIG_COLDFIRE */ ++#if 1 ++ if (r->flags & IORESOURCE_IO) ++ pr = &bus_info->io_space; ++ else ++ pr = &bus_info->mem_space; ++#else ++ if (r->flags & IORESOURCE_IO) ++ pr = &ioport_resource; ++ else ++ pr = &iomem_resource; ++#endif ++ if (request_resource(pr, r) < 0) ++ { ++#ifdef NL_ORIGINAL ++ DBG_DEVS(("PCI: Address space collision on " ++ "region %d of device %s\n", i, dev->name)); ++#else ++ printk("PCI: Address space collision on region %d of device %s\n", i, dev->dev.bus_id); ++#endif ++ } ++ } ++ } ++ ++#ifdef NL_ORIGINAL ++ if (bus->children) ++ pcibios_claim_resources(bus->children); ++#else ++ if (!list_empty(&bus->children)) ++ pcibios_claim_resources(pci_bus_b(bus->children.next)); ++#endif ++ ++#ifdef NL_ORIGINAL ++ bus = bus->next; ++#endif ++ } ++} ++ ++/* ++ * int pcibios_assign_resource(struct pci_dev *dev, int i) ++ * ++ * Assign a new address to a PCI resource. ++ * ++ * Parameters: ++ * ++ * dev - device. ++ * i - resource. ++ * ++ * Result: 0 if successful. ++ */ ++ ++int __init pcibios_assign_resource(struct pci_dev *dev, int i) ++{ ++ struct resource *r = &dev->resource[i]; ++ struct resource *pr = pci_find_parent_resource(dev, r); ++ unsigned long size = r->end + 1; ++ DBG_DEVS(("%s:IO_ALLOC_OFFSET %x\n", __FUNCTION__, IO_ALLOC_OFFSET)); ++ if (!pr) ++ return -EINVAL; ++ ++ if (r->flags & IORESOURCE_IO) ++ { ++ DBG_DEVS(("%s:IORESOURCE_IO:start %x, size %lx\n", ++ __FUNCTION__, bus_info->io_space.start, size)); ++ if (size > 0x100) ++ return -EFBIG; ++ ++#ifdef NL_ORIGINAL ++ if (allocate_resource(pr, r, size, bus_info->io_space.start + ++ IO_ALLOC_OFFSET, bus_info->io_space.end, 1024)) ++#else ++ if (allocate_resource(pr, r, size, bus_info->io_space.start + ++ IO_ALLOC_OFFSET, bus_info->io_space.end, 1024, NULL, NULL)) ++#endif ++ return -EBUSY; ++ } ++ else ++ { ++ DBG_DEVS(("%s:IORESOURCE_MEM:start %x, size %lx\n", ++ __FUNCTION__, bus_info->mem_space.start, size)); ++#ifdef NL_ORIGINAL ++ if (allocate_resource(pr, r, size, bus_info->mem_space.start + ++ MEM_ALLOC_OFFSET, bus_info->mem_space.end, size)) ++#else ++ if (allocate_resource(pr, r, size, bus_info->io_space.start + ++ IO_ALLOC_OFFSET, bus_info->io_space.end, 1024, NULL, NULL)) ++#endif ++ return -EBUSY; ++ } ++ ++ if (i < 6) ++ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, r->start); ++ ++ return 0; ++} ++ ++void pcibios_fixup_bus(struct pci_bus *bus) ++{ ++ struct pci_dev *dev; ++ void *sysdata; ++ ++ sysdata = (bus->parent) ? bus->parent->sysdata : bus->sysdata; ++ ++#ifdef NL_ORIGINAL ++ for (dev = bus->devices; (dev != NULL); dev = dev->sibling) ++#else ++ dev = NULL; ++ while ((dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) ++#endif ++ dev->sysdata = sysdata; ++} ++ ++int __init pcibios_init(void) ++{ ++ printk("Linux/m68k PCI BIOS32 revision %x.%02x\n", MAJOR_REV, MINOR_REV); ++ ++ bus_info = NULL; ++#ifdef CONFIG_COLDFIRE ++ bus_info = init_coldfire_pci(); ++#endif /* CONFIG_COLDFIRE */ ++#ifdef CONFIG_HADES ++ if (MACH_IS_HADES) ++ bus_info = init_hades_pci(); ++#endif ++ if (bus_info != NULL) ++ { ++ printk("PCI: Probing PCI hardware\n"); ++ pci_scan_bus(0, bus_info->m68k_pci_ops, bus_info); ++ pcibios_fixup(); ++#ifdef NL_ORIGINAL ++ pcibios_claim_resources(pci_root); ++#else ++ pcibios_claim_resources(pci_bus_b(pci_root_buses.next)); ++#endif ++ } ++ else ++ printk("PCI: No PCI bus detected\n"); ++ return 0; ++} ++ ++subsys_initcall(pcibios_init); ++ ++char * pcibios_setup(char *str) ++{ ++ if (!strcmp(str, "nomodify")) ++ { ++ pci_modify = 0; ++ return NULL; ++ } ++ else if (!strcmp(str, "skipvga")) ++ { ++ skip_vga = 1; ++ return NULL; ++ } ++ else if (!strcmp(str, "noburst")) ++ { ++ disable_pci_burst = 1; ++ return NULL; ++ } ++ ++ return str; ++} ++#endif /* CONFIG_PCI */ +--- a/arch/m68k/kernel/dma.c ++++ b/arch/m68k/kernel/dma.c +@@ -11,12 +11,24 @@ + #include <linux/kernel.h> + #include <linux/scatterlist.h> + #include <linux/vmalloc.h> +- ++#include <linux/pci.h> + #include <asm/pgalloc.h> + + void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *handle, gfp_t flag) + { ++#if defined(CONFIG_M547X_8X) | defined(CONFIG_M54455) ++ /* ++ * On the M5445x platform the memory allocated with GFP_DMA ++ * is guaranteed to be DMA'able. ++ */ ++ void *addr; ++ ++ size = PAGE_ALIGN(size); ++ addr = kmalloc(size, GFP_DMA); ++ *handle = virt_to_phys(addr); ++ return addr; ++#else + struct page *page, **map; + pgprot_t pgprot; + void *addr; +@@ -55,6 +67,7 @@ void *dma_alloc_coherent(struct device * + kfree(map); + + return addr; ++#endif + } + EXPORT_SYMBOL(dma_alloc_coherent); + +@@ -62,7 +75,11 @@ void dma_free_coherent(struct device *de + void *addr, dma_addr_t handle) + { + pr_debug("dma_free_coherent: %p, %x\n", addr, handle); ++#if defined(CONFIG_M547X_8X) | defined(CONFIG_M54455) ++ kfree(addr); ++#else + vfree(addr); ++#endif + } + EXPORT_SYMBOL(dma_free_coherent); + +--- a/arch/m68k/kernel/Makefile ++++ b/arch/m68k/kernel/Makefile +@@ -2,19 +2,27 @@ + # Makefile for the linux kernel. + # + +-ifndef CONFIG_SUN3 +- extra-y := head.o ++ifdef CONFIG_SUN3 ++ extra-y := sun3-head.o vmlinux.lds ++ obj-y := entry.o signal.o ints.o + else +- extra-y := sun3-head.o ++ifndef CONFIG_COLDFIRE ++ extra-y := head.o vmlinux.lds ++ obj-y := entry.o signal.o traps.o ints.o ++ obj-$(CONFIG_PCI) += bios32.o ++else # CONFIG_COLDFIRE ++ extra-y := ../coldfire/head.o vmlinux.lds ++ifdef CONFIG_M547X_8X ++ obj-$(CONFIG_PCI) += bios32_mcf548x.o ++endif ++endif + endif +-extra-y += vmlinux.lds + +-obj-y := entry.o process.o traps.o ints.o signal.o ptrace.o module.o \ ++obj-y += process.o ptrace.o module.o \ + sys_m68k.o time.o semaphore.o setup.o m68k_ksyms.o devres.o + + devres-y = ../../../kernel/irq/devres.o + +-obj-$(CONFIG_PCI) += bios32.o + obj-y$(CONFIG_MMU_SUN3) += dma.o # no, it's not a typo + + EXTRA_AFLAGS := -traditional +--- a/arch/m68k/kernel/process.c ++++ b/arch/m68k/kernel/process.c +@@ -191,6 +191,7 @@ EXPORT_SYMBOL(kernel_thread); + + void flush_thread(void) + { ++#if !defined(CONFIG_COLDFIRE) + unsigned long zero = 0; + set_fs(USER_DS); + current->thread.fs = __USER_DS; +@@ -198,6 +199,14 @@ void flush_thread(void) + asm volatile (".chip 68k/68881\n\t" + "frestore %0@\n\t" + ".chip 68k" : : "a" (&zero)); ++#else ++ set_fs(USER_DS); ++ current->thread.fs = USER_DS; ++#if defined(CONFIG_FPU) ++ if (!FPU_IS_EMU) ++ asm volatile ("frestore %0@\n\t" : : "a" (&zero)); ++#endif ++#endif + } + + /* +@@ -261,6 +270,7 @@ int copy_thread(int nr, unsigned long cl + * Must save the current SFC/DFC value, NOT the value when + * the parent was last descheduled - RGH 10-08-96 + */ ++#if !defined(CONFIG_COLDFIRE) + p->thread.fs = get_fs().seg; + + if (!FPU_IS_EMU) { +@@ -272,9 +282,34 @@ int copy_thread(int nr, unsigned long cl + "fmoveml %/fpiar/%/fpcr/%/fpsr,%1" + : : "m" (p->thread.fp[0]), "m" (p->thread.fpcntl[0]) + : "memory"); ++#else ++ p->thread.fs = get_fs(); ++ ++#if defined(CONFIG_FPU) ++ if (!FPU_IS_EMU) { ++ /* Copy the current fpu state */ ++ asm volatile ("fsave %0" : : "m" (p->thread.fpstate[0]) ++ : "memory"); ++ ++ if (p->thread.fpstate[0]) { ++ asm volatile ("fmovemd %/fp0-%/fp7,%0" ++ : : "m" (p->thread.fp[0]) ++ : "memory"); ++ asm volatile ("fmovel %/fpiar,%0" ++ : : "m" (p->thread.fpcntl[0]) ++ : "memory"); ++ asm volatile ("fmovel %/fpcr,%0" ++ : : "m" (p->thread.fpcntl[1]) ++ : "memory"); ++ asm volatile ("fmovel %/fpsr,%0" ++ : : "m" (p->thread.fpcntl[2]) ++ : "memory"); ++ } + /* Restore the state in case the fpu was busy */ + asm volatile ("frestore %0" : : "m" (p->thread.fpstate[0])); + } ++#endif ++#endif + + return 0; + } +@@ -283,7 +318,9 @@ int copy_thread(int nr, unsigned long cl + + int dump_fpu (struct pt_regs *regs, struct user_m68kfp_struct *fpu) + { ++#if !defined(CONFIG_COLDFIRE) || defined(CONFIG_FPU) + char fpustate[216]; ++#endif + + if (FPU_IS_EMU) { + int i; +@@ -300,6 +337,7 @@ int dump_fpu (struct pt_regs *regs, stru + } + + /* First dump the fpu context to avoid protocol violation. */ ++#if !defined(CONFIG_COLDFIRE) + asm volatile ("fsave %0" :: "m" (fpustate[0]) : "memory"); + if (!CPU_IS_060 ? !fpustate[0] : !fpustate[2]) + return 0; +@@ -310,6 +348,25 @@ int dump_fpu (struct pt_regs *regs, stru + asm volatile ("fmovemx %/fp0-%/fp7,%0" + :: "m" (fpu->fpregs[0]) + : "memory"); ++#elif defined(CONFIG_FPU) ++ asm volatile ("fsave %0" :: "m" (fpustate[0]) : "memory"); ++ if (!CPU_IS_060 ? !fpustate[0] : !fpustate[2]) ++ return 0; ++ ++ asm volatile ("fmovel %/fpiar,%0" ++ : : "m" (fpu->fpcntl[0]) ++ : "memory"); ++ asm volatile ("fmovel %/fpcr,%0" ++ : : "m" (fpu->fpcntl[1]) ++ : "memory"); ++ asm volatile ("fmovel %/fpsr,%0" ++ : : "m" (fpu->fpcntl[2]) ++ : "memory"); ++ asm volatile ("fmovemd %/fp0-%/fp7,%0" ++ : : "m" (fpu->fpregs[0]) ++ : "memory"); ++#endif ++ + return 1; + } + EXPORT_SYMBOL(dump_fpu); +--- a/arch/m68k/kernel/setup.c ++++ b/arch/m68k/kernel/setup.c +@@ -67,13 +67,22 @@ EXPORT_SYMBOL(m68k_memory); + + struct mem_info m68k_ramdisk; + ++#if !defined(CONFIG_COLDFIRE) + static char m68k_command_line[CL_SIZE]; ++#else ++char m68k_command_line[CL_SIZE]; ++unsigned long uboot_info_stk; ++EXPORT_SYMBOL(uboot_info_stk); ++#endif + + void (*mach_sched_init) (irq_handler_t handler) __initdata = NULL; + /* machine dependent irq functions */ + void (*mach_init_IRQ) (void) __initdata = NULL; + void (*mach_get_model) (char *model); + int (*mach_get_hardware_list) (char *buffer); ++#ifdef CONFIG_COLDFIRE ++void (*mach_tick)(void); ++#endif + /* machine dependent timer functions */ + unsigned long (*mach_gettimeoffset) (void); + int (*mach_hwclk) (int, struct rtc_time*); +@@ -128,13 +137,17 @@ extern void config_hp300(void); + extern void config_q40(void); + extern void config_sun3x(void); + ++#ifdef CONFIG_COLDFIRE ++void coldfire_sort_memrec(void); ++#endif ++ + #define MASK_256K 0xfffc0000 + + extern void paging_init(void); + + static void __init m68k_parse_bootinfo(const struct bi_record *record) + { +- while (record->tag != BI_LAST) { ++ while ((record->tag != BI_LAST) && !(CONFIG_COLDFIRE)) { + int unknown = 0; + const unsigned long *data = record->data; + +@@ -192,7 +205,11 @@ static void __init m68k_parse_bootinfo(c + record->size); + } + +- m68k_realnum_memory = m68k_num_memory; ++#ifdef CONFIG_COLDFIRE ++ coldfire_sort_memrec(); ++#endif ++ ++ m68k_realnum_memory = m68k_num_memory; + #ifdef CONFIG_SINGLE_MEMORY_CHUNK + if (m68k_num_memory > 1) { + printk("Ignoring last %i chunks of physical memory\n", +@@ -205,7 +222,9 @@ static void __init m68k_parse_bootinfo(c + void __init setup_arch(char **cmdline_p) + { + extern int _etext, _edata, _end; ++#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE) + int i; ++#endif + + /* The bootinfo is located right after the kernel bss */ + m68k_parse_bootinfo((const struct bi_record *)&_end); +@@ -220,9 +239,10 @@ void __init setup_arch(char **cmdline_p) + * We should really do our own FPU check at startup. + * [what do we do with buggy 68LC040s? if we have problems + * with them, we should add a test to check_bugs() below] */ +-#ifndef CONFIG_M68KFPU_EMU_ONLY ++#if !defined(CONFIG_M68KFPU_EMU_ONLY) && defined(CONFIG_FPU) + /* clear the fpu if we have one */ +- if (m68k_fputype & (FPU_68881|FPU_68882|FPU_68040|FPU_68060)) { ++ if (m68k_fputype & (FPU_68881|FPU_68882|FPU_68040|FPU_68060| ++ FPU_CFV4E)) { + volatile int zero = 0; + asm volatile ("frestore %0" : : "m" (zero)); + } +@@ -310,13 +330,18 @@ void __init setup_arch(char **cmdline_p) + config_sun3x(); + break; + #endif ++#ifdef CONFIG_COLDFIRE ++ case MACH_CFMMU: ++ config_coldfire(); ++ break; ++#endif + default: + panic("No configuration setup"); + } + + paging_init(); + +-#ifndef CONFIG_SUN3 ++#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE) + for (i = 1; i < m68k_num_memory; i++) + free_bootmem_node(NODE_DATA(i), m68k_memory[i].addr, + m68k_memory[i].size); +@@ -343,6 +368,10 @@ void __init setup_arch(char **cmdline_p) + + #endif /* !CONFIG_SUN3 */ + ++#ifdef CONFIG_COLDFIRE ++ mmu_context_init(); ++#endif ++ + /* set ISA defs early as possible */ + #if defined(CONFIG_ISA) && defined(MULTI_ISA) + #if defined(CONFIG_Q40) +@@ -373,6 +402,7 @@ static int show_cpuinfo(struct seq_file + #define LOOP_CYCLES_68030 (8) + #define LOOP_CYCLES_68040 (3) + #define LOOP_CYCLES_68060 (1) ++#define LOOP_CYCLES_COLDFIRE (2) + + if (CPU_IS_020) { + cpu = "68020"; +@@ -386,6 +416,9 @@ static int show_cpuinfo(struct seq_file + } else if (CPU_IS_060) { + cpu = "68060"; + clockfactor = LOOP_CYCLES_68060; ++ } else if (CPU_IS_CFV4E) { ++ cpu = "ColdFire V4e"; ++ clockfactor = LOOP_CYCLES_COLDFIRE; + } else { + cpu = "680x0"; + clockfactor = 0; +@@ -404,6 +437,8 @@ static int show_cpuinfo(struct seq_file + fpu = "68060"; + else if (m68k_fputype & FPU_SUNFPA) + fpu = "Sun FPA"; ++ else if (m68k_fputype & FPU_CFV4E) ++ fpu = "ColdFire V4e"; + else + fpu = "none"; + #endif +@@ -420,6 +455,8 @@ static int show_cpuinfo(struct seq_file + mmu = "Sun-3"; + else if (m68k_mmutype & MMU_APOLLO) + mmu = "Apollo"; ++ else if (m68k_mmutype & MMU_CFV4E) ++ mmu = "ColdFire"; + else + mmu = "unknown"; + +@@ -482,7 +519,7 @@ int get_hardware_list(char *buffer) + + void check_bugs(void) + { +-#ifndef CONFIG_M68KFPU_EMU ++#if !defined(CONFIG_M68KFPU_EMU) && !defined(CONFIG_M5445X) + if (m68k_fputype == 0) { + printk(KERN_EMERG "*** YOU DO NOT HAVE A FLOATING POINT UNIT, " + "WHICH IS REQUIRED BY LINUX/M68K ***\n"); +--- a/arch/m68k/kernel/sys_m68k.c ++++ b/arch/m68k/kernel/sys_m68k.c +@@ -29,6 +29,9 @@ + #include <asm/traps.h> + #include <asm/page.h> + #include <asm/unistd.h> ++#ifdef CONFIG_COLDFIRE ++#include <asm/cacheflush.h> ++#endif + + /* + * sys_pipe() is the normal C calling standard for creating +@@ -257,6 +260,7 @@ asmlinkage int sys_ipc (uint call, int f + return -EINVAL; + } + ++#ifndef CONFIG_COLDFIRE + /* Convert virtual (user) address VADDR to physical address PADDR */ + #define virt_to_phys_040(vaddr) \ + ({ \ +@@ -580,6 +584,7 @@ cache_flush_060 (unsigned long addr, int + } + return 0; + } ++#endif /* CONFIG_COLDFIRE */ + + /* sys_cacheflush -- flush (part of) the processor cache. */ + asmlinkage int +@@ -612,6 +617,7 @@ sys_cacheflush (unsigned long addr, int + goto out; + } + ++#ifndef CONFIG_COLDFIRE + if (CPU_IS_020_OR_030) { + if (scope == FLUSH_SCOPE_LINE && len < 256) { + unsigned long cacr; +@@ -656,6 +662,16 @@ sys_cacheflush (unsigned long addr, int + ret = cache_flush_060 (addr, scope, cache, len); + } + } ++#else /* CONFIG_COLDFIRE */ ++ if ((cache & FLUSH_CACHE_INSN) && (cache & FLUSH_CACHE_DATA)) ++ flush_bcache(); ++ else if (cache & FLUSH_CACHE_INSN) ++ flush_icache(); ++ else ++ flush_dcache(); ++ ++ ret = 0; ++#endif /* CONFIG_COLDFIRE */ + out: + unlock_kernel(); + return ret; +--- a/arch/m68k/kernel/time.c ++++ b/arch/m68k/kernel/time.c +@@ -40,6 +40,11 @@ static inline int set_rtc_mmss(unsigned + */ + static irqreturn_t timer_interrupt(int irq, void *dummy) + { ++#ifdef CONFIG_COLDFIRE ++ /* kick hardware timer if necessary */ ++ if (mach_tick) ++ mach_tick(); ++#endif + do_timer(1); + #ifndef CONFIG_SMP + update_process_times(user_mode(get_irq_regs())); +--- a/arch/m68k/kernel/vmlinux.lds.S ++++ b/arch/m68k/kernel/vmlinux.lds.S +@@ -1,10 +1,13 @@ + PHDRS + { +- text PT_LOAD FILEHDR PHDRS FLAGS (7); ++ headers PT_PHDR PHDRS ; ++ text PT_LOAD FILEHDR PHDRS FLAGS (5); + data PT_LOAD FLAGS (7); + } + #ifdef CONFIG_SUN3 + #include "vmlinux-sun3.lds" ++#elif CONFIG_COLDFIRE ++#include "../coldfire/vmlinux-cf.lds" + #else + #include "vmlinux-std.lds" + #endif +--- a/arch/m68k/lib/checksum.c ++++ b/arch/m68k/lib/checksum.c +@@ -39,8 +39,131 @@ + * computes a partial checksum, e.g. for TCP/UDP fragments + */ + ++#ifdef CONFIG_COLDFIRE ++ ++static inline unsigned short from32to16(unsigned long x) ++{ ++ /* add up 16-bit and 16-bit for 16+c bit */ ++ x = (x & 0xffff) + (x >> 16); ++ /* add up carry.. */ ++ x = (x & 0xffff) + (x >> 16); ++ return x; ++} ++ ++static unsigned long do_csum(const unsigned char *buff, int len) ++{ ++ int odd, count; ++ unsigned long result = 0; ++ ++ if (len <= 0) ++ goto out; ++ odd = 1 & (unsigned long) buff; ++ if (odd) { ++ result = *buff; ++ len--; ++ buff++; ++ } ++ count = len >> 1; /* nr of 16-bit words.. */ ++ if (count) { ++ if (2 & (unsigned long) buff) { ++ result += *(unsigned short *) buff; ++ count--; ++ len -= 2; ++ buff += 2; ++ } ++ count >>= 1; /* nr of 32-bit words.. */ ++ if (count) { ++ unsigned long carry = 0; ++ do { ++ unsigned long w = *(unsigned long *) buff; ++ count--; ++ buff += 4; ++ result += carry; ++ result += w; ++ carry = (w > result); ++ } while (count); ++ result += carry; ++ result = (result & 0xffff) + (result >> 16); ++ } ++ if (len & 2) { ++ result += *(unsigned short *) buff; ++ buff += 2; ++ } ++ } ++ if (len & 1) ++ result += (*buff << 8); ++ result = from32to16(result); ++ if (odd) ++ result = ((result >> 8) & 0xff) | ((result & 0xff) << 8); ++out: ++ return result; ++} ++ ++/* ++ * This is a version of ip_compute_csum() optimized for IP headers, ++ * which always checksum on 4 octet boundaries. ++ */ ++__sum16 ip_fast_csum(const void *iph, unsigned int ihl) ++{ ++ return ~do_csum(iph, ihl*4); ++} ++EXPORT_SYMBOL(ip_fast_csum); ++ ++/* ++ * computes the checksum of a memory block at buff, length len, ++ * and adds in "sum" (32-bit) ++ * ++ * returns a 32-bit number suitable for feeding into itself ++ * or csum_tcpudp_magic ++ * ++ * this function must be called with even lengths, except ++ * for the last fragment, which may be odd ++ * ++ * it's best to have buff aligned on a 32-bit boundary ++ */ + __wsum csum_partial(const void *buff, int len, __wsum sum) + { ++ unsigned int result = do_csum(buff, len); ++ ++ /* add in old sum, and carry.. */ ++ result += sum; ++ if (sum > result) ++ result += 1; ++ return result; ++} ++EXPORT_SYMBOL(csum_partial); ++ ++/* ++ * copy from fs while checksumming, otherwise like csum_partial ++ */ ++ ++__wsum ++csum_partial_copy_from_user(const void __user *src, void *dst, int len, ++ __wsum sum, int *csum_err) ++{ ++ if (csum_err) *csum_err = 0; ++ memcpy(dst, src, len); ++ return csum_partial(dst, len, sum); ++} ++EXPORT_SYMBOL(csum_partial_copy_from_user); ++ ++/* ++ * copy from ds while checksumming, otherwise like csum_partial ++ */ ++ ++__wsum ++csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum) ++{ ++ memcpy(dst, src, len); ++ return csum_partial(dst, len, sum); ++} ++EXPORT_SYMBOL(csum_partial_copy_nocheck); ++ ++#else /* !CONFIG_COLDFIRE */ ++ ++unsigned int ++csum_partial(const unsigned char *buff, int len, unsigned int sum) ++{ + unsigned long tmp1, tmp2; + /* + * Experiments with ethernet and slip connections show that buff +@@ -423,3 +546,4 @@ csum_partial_copy_nocheck(const void *sr + return(sum); + } + EXPORT_SYMBOL(csum_partial_copy_nocheck); ++#endif /* CONFIG_COLDFIRE */ +--- a/arch/m68k/lib/muldi3.c ++++ b/arch/m68k/lib/muldi3.c +@@ -21,12 +21,22 @@ Boston, MA 02111-1307, USA. */ + + #define BITS_PER_UNIT 8 + ++#ifdef CONFIG_COLDFIRE ++#define umul_ppmm(w1, w0, u, v) \ ++ do { \ ++ unsigned long long x; \ ++ x = (unsigned long long)u * v; \ ++ w0 = (unsigned long)(x & 0x00000000ffffffff); \ ++ w1 = (unsigned long)(x & 0xffffffff00000000) >> 32; \ ++ } while (0) ++#else /* CONFIG_COLDFIRE */ + #define umul_ppmm(w1, w0, u, v) \ + __asm__ ("mulu%.l %3,%1:%0" \ + : "=d" ((USItype)(w0)), \ + "=d" ((USItype)(w1)) \ + : "%0" ((USItype)(u)), \ + "dmi" ((USItype)(v))) ++#endif /* CONFIG_COLDFIRE */ + + #define __umulsidi3(u, v) \ + ({DIunion __w; \ +--- a/arch/m68k/lib/semaphore.S ++++ b/arch/m68k/lib/semaphore.S +@@ -16,11 +16,24 @@ + * there is contention on the semaphore. + */ + ENTRY(__down_failed) ++#ifndef CONFIG_COLDFIRE + moveml %a0/%d0/%d1,-(%sp) ++#else ++ movel %a0,-(%sp) ++ movel %d0,-(%sp) ++ movel %d1,-(%sp) ++#endif + movel %a1,-(%sp) + jbsr __down + movel (%sp)+,%a1 ++#ifndef CONFIG_COLDFIRE + moveml (%sp)+,%a0/%d0/%d1 ++#else ++ movel (%sp)+,%d1 ++ movel (%sp)+,%d0 ++ movel (%sp)+,%a0 ++#endif ++ + rts + + ENTRY(__down_failed_interruptible) +@@ -44,10 +57,22 @@ ENTRY(__down_failed_trylock) + rts + + ENTRY(__up_wakeup) ++#ifndef CONFIG_COLDFIRE + moveml %a0/%d0/%d1,-(%sp) ++#else ++ movel %a0,-(%sp) ++ movel %d0,-(%sp) ++ movel %d1,-(%sp) ++#endif + movel %a1,-(%sp) + jbsr __up + movel (%sp)+,%a1 ++#ifndef CONFIG_COLDFIRE + moveml (%sp)+,%a0/%d0/%d1 ++#else ++ movel (%sp)+,%d1 ++ movel (%sp)+,%d0 ++ movel (%sp)+,%a0 ++#endif + rts + +--- a/arch/m68k/lib/string.c ++++ b/arch/m68k/lib/string.c +@@ -15,6 +15,7 @@ char *strcpy(char *dest, const char *src + } + EXPORT_SYMBOL(strcpy); + ++#ifndef CONFIG_COLDFIRE + void *memset(void *s, int c, size_t count) + { + void *xs = s; +@@ -143,6 +144,69 @@ void *memcpy(void *to, const void *from, + } + EXPORT_SYMBOL(memcpy); + ++#else /* CONFIG_COLDFIRE */ ++ ++void *memset(void *s, int c, size_t count) ++{ ++ unsigned long x; ++ void *originalTo; ++ ++ for (x = 0; x < count; x++) ++ *(unsigned char *)s++ = (unsigned char)c; ++ ++ return originalTo; ++} ++EXPORT_SYMBOL(memset); ++ ++void *memcpy(void *to, const void *from, size_t n) ++{ ++ void *xto = to; ++ size_t temp; ++ ++ if (!n) ++ return xto; ++ if ((long) to & 1) { ++ char *cto = to; ++ const char *cfrom = from; ++ *cto++ = *cfrom++; ++ to = cto; ++ from = cfrom; ++ n--; ++ } ++ if (n > 2 && (long) to & 2) { ++ short *sto = to; ++ const short *sfrom = from; ++ *sto++ = *sfrom++; ++ to = sto; ++ from = sfrom; ++ n -= 2; ++ } ++ temp = n >> 2; ++ if (temp) { ++ long *lto = to; ++ const long *lfrom = from; ++ for (; temp; temp--) ++ *lto++ = *lfrom++; ++ to = lto; ++ from = lfrom; ++ } ++ if (n & 2) { ++ short *sto = to; ++ const short *sfrom = from; ++ *sto++ = *sfrom++; ++ to = sto; ++ from = sfrom; ++ } ++ if (n & 1) { ++ char *cto = to; ++ const char *cfrom = from; ++ *cto = *cfrom; ++ } ++ return xto; ++} ++EXPORT_SYMBOL(memcpy); ++#endif /* CONFIG_COLDFIRE */ ++ + void *memmove(void *dest, const void *src, size_t n) + { + void *xdest = dest; +--- a/arch/m68k/lib/uaccess.c ++++ b/arch/m68k/lib/uaccess.c +@@ -5,6 +5,7 @@ + */ + + #include <linux/module.h> ++#ifndef CONFIG_COLDFIRE + #include <asm/uaccess.h> + + unsigned long __generic_copy_from_user(void *to, const void __user *from, +@@ -220,3 +221,244 @@ unsigned long __clear_user(void __user * + return res; + } + EXPORT_SYMBOL(__clear_user); ++ ++#else /* CONFIG_COLDFIRE */ ++ ++#include <asm/cf_uaccess.h> ++ ++unsigned long __generic_copy_from_user(void *to, const void *from, ++ unsigned long n) ++{ ++ unsigned long tmp; ++ __asm__ __volatile__ ++ (" tstl %2\n" ++ " jeq 2f\n" ++ "1: movel (%1)+,%3\n" ++ " movel %3,(%0)+\n" ++ " subql #1,%2\n" ++ " jne 1b\n" ++ "2: movel %4,%2\n" ++ " bclr #1,%2\n" ++ " jeq 4f\n" ++ "3: movew (%1)+,%3\n" ++ " movew %3,(%0)+\n" ++ "4: bclr #0,%2\n" ++ " jeq 6f\n" ++ "5: moveb (%1)+,%3\n" ++ " moveb %3,(%0)+\n" ++ "6:\n" ++ ".section .fixup,\"ax\"\n" ++ " .even\n" ++ "7: movel %2,%%d0\n" ++ "71:clrl (%0)+\n" ++ " subql #1,%%d0\n" ++ " jne 71b\n" ++ " lsll #2,%2\n" ++ " addl %4,%2\n" ++ " btst #1,%4\n" ++ " jne 81f\n" ++ " btst #0,%4\n" ++ " jne 91f\n" ++ " jra 6b\n" ++ "8: addql #2,%2\n" ++ "81:clrw (%0)+\n" ++ " btst #0,%4\n" ++ " jne 91f\n" ++ " jra 6b\n" ++ "9: addql #1,%2\n" ++ "91:clrb (%0)+\n" ++ " jra 6b\n" ++ ".previous\n" ++ ".section __ex_table,\"a\"\n" ++ " .align 4\n" ++ " .long 1b,7b\n" ++ " .long 3b,8b\n" ++ " .long 5b,9b\n" ++ ".previous" ++ : "=a"(to), "=a"(from), "=d"(n), "=&d"(tmp) ++ : "d"(n & 3), "0"(to), "1"(from), "2"(n/4) ++ : "d0", "memory"); ++ return n; ++} ++EXPORT_SYMBOL(__generic_copy_from_user); ++ ++ ++unsigned long __generic_copy_to_user(void *to, const void *from, ++ unsigned long n) ++{ ++ unsigned long tmp; ++ __asm__ __volatile__ ++ (" tstl %2\n" ++ " jeq 3f\n" ++ "1: movel (%1)+,%3\n" ++ "22:movel %3,(%0)+\n" ++ "2: subql #1,%2\n" ++ " jne 1b\n" ++ "3: movel %4,%2\n" ++ " bclr #1,%2\n" ++ " jeq 4f\n" ++ " movew (%1)+,%3\n" ++ "24:movew %3,(%0)+\n" ++ "4: bclr #0,%2\n" ++ " jeq 5f\n" ++ " moveb (%1)+,%3\n" ++ "25:moveb %3,(%0)+\n" ++ "5:\n" ++ ".section .fixup,\"ax\"\n" ++ " .even\n" ++ "60:addql #1,%2\n" ++ "6: lsll #2,%2\n" ++ " addl %4,%2\n" ++ " jra 5b\n" ++ "7: addql #2,%2\n" ++ " jra 5b\n" ++ "8: addql #1,%2\n" ++ " jra 5b\n" ++ ".previous\n" ++ ".section __ex_table,\"a\"\n" ++ " .align 4\n" ++ " .long 1b,60b\n" ++ " .long 22b,6b\n" ++ " .long 2b,6b\n" ++ " .long 24b,7b\n" ++ " .long 3b,60b\n" ++ " .long 4b,7b\n" ++ " .long 25b,8b\n" ++ " .long 5b,8b\n" ++ ".previous" ++ : "=a"(to), "=a"(from), "=d"(n), "=&d"(tmp) ++ : "r"(n & 3), "0"(to), "1"(from), "2"(n / 4) ++ : "memory"); ++ return n; ++} ++EXPORT_SYMBOL(__generic_copy_to_user); ++ ++/* ++ * Copy a null terminated string from userspace. ++ */ ++ ++long strncpy_from_user(char *dst, const char *src, long count) ++{ ++ long res = -EFAULT; ++ if (!(access_ok(VERIFY_READ, src, 1))) /* --tym-- */ ++ return res; ++ if (count == 0) return count; ++ __asm__ __volatile__ ++ ("1: moveb (%2)+,%%d0\n" ++ "12:moveb %%d0,(%1)+\n" ++ " jeq 2f\n" ++ " subql #1,%3\n" ++ " jne 1b\n" ++ "2: subl %3,%0\n" ++ "3:\n" ++ ".section .fixup,\"ax\"\n" ++ " .even\n" ++ "4: movel %4,%0\n" ++ " jra 3b\n" ++ ".previous\n" ++ ".section __ex_table,\"a\"\n" ++ " .align 4\n" ++ " .long 1b,4b\n" ++ " .long 12b,4b\n" ++ ".previous" ++ : "=d"(res), "=a"(dst), "=a"(src), "=d"(count) ++ : "i"(-EFAULT), "0"(count), "1"(dst), "2"(src), "3"(count) ++ : "d0", "memory"); ++ return res; ++} ++EXPORT_SYMBOL(strncpy_from_user); ++ ++/* ++ * Return the size of a string (including the ending 0) ++ * ++ * Return 0 on exception, a value greater than N if too long ++ */ ++long strnlen_user(const char *src, long n) ++{ ++ long res = -EFAULT; ++ if (!(access_ok(VERIFY_READ, src, 1))) /* --tym-- */ ++ return res; ++ ++ res = -(long)src; ++ __asm__ __volatile__ ++ ("1:\n" ++ " tstl %2\n" ++ " jeq 3f\n" ++ "2: moveb (%1)+,%%d0\n" ++ "22:\n" ++ " subql #1,%2\n" ++ " tstb %%d0\n" ++ " jne 1b\n" ++ " jra 4f\n" ++ "3:\n" ++ " addql #1,%0\n" ++ "4:\n" ++ " addl %1,%0\n" ++ "5:\n" ++ ".section .fixup,\"ax\"\n" ++ " .even\n" ++ "6: moveq %3,%0\n" ++ " jra 5b\n" ++ ".previous\n" ++ ".section __ex_table,\"a\"\n" ++ " .align 4\n" ++ " .long 2b,6b\n" ++ " .long 22b,6b\n" ++ ".previous" ++ : "=d"(res), "=a"(src), "=d"(n) ++ : "i"(0), "0"(res), "1"(src), "2"(n) ++ : "d0"); ++ return res; ++} ++EXPORT_SYMBOL(strnlen_user); ++ ++ ++/* ++ * Zero Userspace ++ */ ++ ++unsigned long __clear_user(void *to, unsigned long n) ++{ ++ __asm__ __volatile__ ++ (" tstl %1\n" ++ " jeq 3f\n" ++ "1: movel %3,(%0)+\n" ++ "2: subql #1,%1\n" ++ " jne 1b\n" ++ "3: movel %2,%1\n" ++ " bclr #1,%1\n" ++ " jeq 4f\n" ++ "24:movew %3,(%0)+\n" ++ "4: bclr #0,%1\n" ++ " jeq 5f\n" ++ "25:moveb %3,(%0)+\n" ++ "5:\n" ++ ".section .fixup,\"ax\"\n" ++ " .even\n" ++ "61:addql #1,%1\n" ++ "6: lsll #2,%1\n" ++ " addl %2,%1\n" ++ " jra 5b\n" ++ "7: addql #2,%1\n" ++ " jra 5b\n" ++ "8: addql #1,%1\n" ++ " jra 5b\n" ++ ".previous\n" ++ ".section __ex_table,\"a\"\n" ++ " .align 4\n" ++ " .long 1b,61b\n" ++ " .long 2b,6b\n" ++ " .long 3b,61b\n" ++ " .long 24b,7b\n" ++ " .long 4b,7b\n" ++ " .long 25b,8b\n" ++ " .long 5b,8b\n" ++ ".previous" ++ : "=a"(to), "=d"(n) ++ : "r"(n & 3), "d"(0), "0"(to), "1"(n/4)); ++ return n; ++} ++EXPORT_SYMBOL(__clear_user); ++ ++#endif /* CONFIG_COLDFIRE */ ++ +--- a/arch/m68k/Makefile ++++ b/arch/m68k/Makefile +@@ -16,7 +16,9 @@ + KBUILD_DEFCONFIG := amiga_defconfig + + # override top level makefile ++ifndef CONFIG_COLDFIRE + AS += -m68020 ++endif + LDFLAGS := -m m68kelf + LDFLAGS_MODULE += -T $(srctree)/arch/m68k/kernel/module.lds + ifneq ($(SUBARCH),$(ARCH)) +@@ -30,12 +32,18 @@ ifdef CONFIG_SUN3 + LDFLAGS_vmlinux = -N + endif + ++ifdef CONFIG_COLDFIRE ++# OBJCOPYFLAGS := -R .note -R .note.gnu.build-id -R .comment -S ++# LDFLAGS_vmlinux = --verbose ++endif ++ + CHECKFLAGS += -D__mc68000__ + + # without -fno-strength-reduce the 53c7xx.c driver fails ;-( + KBUILD_CFLAGS += -pipe -fno-strength-reduce -ffixed-a2 + + # enable processor switch if compiled only for a single cpu ++ifndef CONFIG_COLDFIRE + ifndef CONFIG_M68020 + ifndef CONFIG_M68030 + +@@ -49,6 +57,16 @@ endif + + endif + endif ++endif ++ ++ifdef CONFIG_M5445X ++KBUILD_CFLAGS += -march=isac -mcpu=54455 -msoft-float -g ++KBUILD_AFLAGS += -march=isac -mcpu=54455 -msoft-float ++endif ++ifdef CONFIG_M547X_8X ++KBUILD_CFLAGS += -mcfv4e -g ++KBUILD_AFLAGS += -mcfv4e ++endif + + ifdef CONFIG_KGDB + # If configured for kgdb support, include debugging infos and keep the +@@ -57,8 +75,12 @@ KBUILD_CFLAGS := $(subst -fomit-frame-po + endif + + ifndef CONFIG_SUN3 ++ifndef CONFIG_COLDFIRE + head-y := arch/m68k/kernel/head.o + else ++head-y := arch/m68k/coldfire/head.o ++endif ++else + head-y := arch/m68k/kernel/sun3-head.o + endif + +@@ -79,6 +101,7 @@ core-$(CONFIG_SUN3) += arch/m68k/sun3/ + core-$(CONFIG_M68040) += arch/m68k/fpsp040/ + core-$(CONFIG_M68060) += arch/m68k/ifpsp060/ + core-$(CONFIG_M68KFPU_EMU) += arch/m68k/math-emu/ ++core-$(CONFIG_COLDFIRE) += arch/m68k/coldfire/ + + all: zImage + +--- a/arch/m68k/mm/cache.c ++++ b/arch/m68k/mm/cache.c +@@ -10,7 +10,11 @@ + #include <asm/pgalloc.h> + #include <asm/traps.h> + ++#ifdef CONFIG_COLDFIRE ++#include <asm/cfcache.h> ++#endif /* CONFIG_COLDFIRE */ + ++#ifndef CONFIG_COLDFIRE + static unsigned long virt_to_phys_slow(unsigned long vaddr) + { + if (CPU_IS_060) { +@@ -69,11 +73,18 @@ static unsigned long virt_to_phys_slow(u + } + return 0; + } ++#endif /* CONFIG_COLDFIRE */ ++ + + /* Push n pages at kernel virtual address and clear the icache */ + /* RZ: use cpush %bc instead of cpush %dc, cinv %ic */ + void flush_icache_range(unsigned long address, unsigned long endaddr) + { ++#ifdef CONFIG_COLDFIRE ++// JKM -- hack until new cpushl stuff is in ++// cf_icache_flush_range(address, endaddr); ++ flush_icache(); ++#else /* !CONFIG_COLDFIRE */ + + if (CPU_IS_040_OR_060) { + address &= PAGE_MASK; +@@ -94,9 +105,11 @@ void flush_icache_range(unsigned long ad + : "=&d" (tmp) + : "di" (FLUSH_I)); + } ++#endif /* CONFIG_COLDFIRE */ + } + EXPORT_SYMBOL(flush_icache_range); + ++#ifndef CONFIG_COLDFIRE + void flush_icache_user_range(struct vm_area_struct *vma, struct page *page, + unsigned long addr, int len) + { +@@ -115,4 +128,5 @@ void flush_icache_user_range(struct vm_a + : "di" (FLUSH_I)); + } + } ++#endif /* CONFIG_COLDFIRE */ + +--- /dev/null ++++ b/arch/m68k/mm/cf-mmu.c +@@ -0,0 +1,260 @@ ++/* ++ * linux/arch/m68k/mm/cf-mmu.c ++ * ++ * Based upon linux/arch/m68k/mm/sun3mmu.c ++ * Based upon linux/arch/ppc/mm/mmu_context.c ++ * ++ * Implementations of mm routines specific to the Coldfire MMU. ++ * ++ * Copyright (c) 2008 Freescale Semiconductor, Inc. ++ */ ++ ++#include <linux/signal.h> ++#include <linux/sched.h> ++#include <linux/mm.h> ++#include <linux/swap.h> ++#include <linux/kernel.h> ++#include <linux/string.h> ++#include <linux/types.h> ++#include <linux/init.h> ++#ifdef CONFIG_BLK_DEV_RAM ++#include <linux/blkdev.h> ++#endif ++#include <linux/bootmem.h> ++ ++#include <asm/setup.h> ++#include <asm/uaccess.h> ++#include <asm/page.h> ++#include <asm/pgtable.h> ++#include <asm/system.h> ++#include <asm/machdep.h> ++#include <asm/io.h> ++#include <asm/mmu_context.h> ++#include <asm/cf_pgalloc.h> ++ ++#include <asm/coldfire.h> ++#include <asm/tlbflush.h> ++ ++#define KMAPAREA(x) ((x >= VMALLOC_START) && ( x < KMAP_END)) ++ ++#undef DEBUG ++ ++mm_context_t next_mmu_context; ++unsigned long context_map[LAST_CONTEXT / BITS_PER_LONG + 1]; ++ ++atomic_t nr_free_contexts; ++struct mm_struct *context_mm[LAST_CONTEXT+1]; ++void steal_context(void); ++ ++ ++const char bad_pmd_string[] = "Bad pmd in pte_alloc: %08lx\n"; ++ ++extern unsigned long empty_bad_page_table; ++extern unsigned long empty_bad_page; ++extern unsigned long num_pages; ++ ++extern char __init_begin, __init_end; ++ ++void free_initmem(void) ++{ ++#if 0 ++ unsigned long addr; ++ unsigned long start = (unsigned long)&__init_begin; ++ unsigned long end = (unsigned long)&__init_end; ++ ++ printk(KERN_INFO "free_initmem: __init_begin = 0x%lx __init_end = 0x%lx\n", start, end); ++ ++ addr = (unsigned long)&__init_begin; ++ for (; addr < (unsigned long)&__init_end; addr += PAGE_SIZE) { ++ /* not currently used */ ++ virt_to_page(addr)->flags &= ~(1 << PG_reserved); ++ init_page_count(virt_to_page(addr)); ++ free_page(addr); ++ totalram_pages++; ++ } ++#endif ++} ++ ++/* Coldfire paging_init derived from sun3 */ ++void __init paging_init(void) ++{ ++ pgd_t * pg_dir; ++ pte_t * pg_table; ++ int i; ++ unsigned long address; ++ unsigned long next_pgtable; ++ unsigned long bootmem_end; ++ unsigned long zones_size[MAX_NR_ZONES]; ++ unsigned long size; ++ enum zone_type zone; ++ ++ empty_zero_page = (void *)alloc_bootmem_pages(PAGE_SIZE); ++ memset((void *)empty_zero_page, 0, PAGE_SIZE); ++ ++ pg_dir = swapper_pg_dir; ++ memset(swapper_pg_dir, 0, sizeof (swapper_pg_dir)); ++ ++ size = num_pages * sizeof(pte_t); ++ size = (size + PAGE_SIZE) & ~(PAGE_SIZE-1); ++ next_pgtable = (unsigned long)alloc_bootmem_pages(size); ++ ++ bootmem_end = (next_pgtable + size + PAGE_SIZE) & PAGE_MASK; ++ pg_dir += PAGE_OFFSET >> PGDIR_SHIFT; ++ ++ address = PAGE_OFFSET; ++ while (address < (unsigned long)high_memory) ++ { ++ pg_table = (pte_t *)next_pgtable; ++ next_pgtable += PTRS_PER_PTE * sizeof (pte_t); ++ pgd_val(*pg_dir) = (unsigned long) pg_table; ++ pg_dir++; ++ ++ /* now change pg_table to kernel virtual addresses */ ++ for (i=0; i<PTRS_PER_PTE; ++i, ++pg_table) ++ { ++ pte_t pte = pfn_pte(virt_to_pfn(address), PAGE_INIT); ++ if (address >= (unsigned long)high_memory) ++ pte_val (pte) = 0; ++ ++ set_pte (pg_table, pte); ++ address += PAGE_SIZE; ++ } ++ } ++ ++ current->mm = NULL; ++ ++ /* clear zones */ ++ for (zone = 0; zone < MAX_NR_ZONES; zone++) ++ zones_size[zone] = 0x0; ++ ++ /* allocate the bottom 32M (0x40x 0x41x) to DMA - head.S marks them NO CACHE */ ++ /* JKM - this should be changed to allocate from the TOP (0x4f,0x4e) but the ++ * allocator is being a bit challenging */ ++ zones_size[ZONE_DMA] = (32*1024*1024) >> PAGE_SHIFT; ++ ++ /* allocate the rest to NORMAL - head.S marks them CACHE */ ++ zones_size[ZONE_NORMAL] = (((unsigned long)high_memory - PAGE_OFFSET) >> PAGE_SHIFT) - zones_size[0]; ++ ++ free_area_init(zones_size); ++} ++ ++ ++int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word) ++{ ++ struct mm_struct *mm; ++ pgd_t *pgd; ++ pmd_t *pmd; ++ pte_t *pte; ++ unsigned long mmuar; ++ int asid; ++ int flags; ++ ++ local_save_flags(flags); ++ local_irq_disable(); ++ ++ mmuar = ( dtlb ) ? regs->mmuar ++ : regs->pc + (extension_word * sizeof(long)); ++ ++ mm = (!user_mode(regs) && KMAPAREA(mmuar)) ? &init_mm : current->mm; ++ ++ if (!mm) { ++ local_irq_restore(flags); ++ return (-1); ++ } ++ ++ pgd = pgd_offset(mm, mmuar); ++ if (pgd_none(*pgd)) { ++ local_irq_restore(flags); ++ return (-1); ++ } ++ ++ pmd = pmd_offset(pgd, mmuar); ++ if (pmd_none(*pmd)) { ++ local_irq_restore(flags); ++ return (-1); ++ } ++ ++ pte = (KMAPAREA(mmuar)) ? pte_offset_kernel(pmd, mmuar) ++ : pte_offset_map(pmd, mmuar); ++ if (pte_none(*pte) || !pte_present(*pte)) { ++ local_irq_restore(flags); ++ return (-1); ++ } ++ ++ if (write) { ++ if (!pte_write(*pte)) { ++ local_irq_restore(flags); ++ return (-1); ++ } ++ set_pte(pte, pte_mkdirty(*pte)); ++ } ++ ++ set_pte(pte, pte_mkyoung(*pte)); ++ asid = mm->context & 0xff; ++ if (!pte_dirty(*pte) && !KMAPAREA(mmuar)) ++ set_pte(pte, pte_wrprotect(*pte)); ++ ++ *MMUTR = (mmuar & PAGE_MASK) | (asid << CF_ASID_MMU_SHIFT) ++ | (((int)(pte->pte) & (int)CF_PAGE_MMUTR_MASK ) >> CF_PAGE_MMUTR_SHIFT) ++ | MMUTR_V; ++ ++ *MMUDR = (pte_val(*pte) & PAGE_MASK) ++ | ((pte->pte) & CF_PAGE_MMUDR_MASK) ++ | MMUDR_SZ8K | MMUDR_X; ++ ++ if ( dtlb ) ++ *MMUOR = MMUOR_ACC | MMUOR_UAA; ++ else ++ *MMUOR = MMUOR_ITLB | MMUOR_ACC | MMUOR_UAA; ++ ++ asm("nop"); ++ ++#ifdef DEBUG ++ printk("cf_tlb_miss: va=%lx, pa=%lx\n", (mmuar & PAGE_MASK), ++ (pte_val(*pte) & PAGE_MASK)); ++#endif ++ local_irq_restore(flags); ++ return (0); ++} ++ ++ ++/* The following was taken from arch/ppc/mmu_context.c ++ * ++ * Initialize the context management stuff. ++ */ ++void __init mmu_context_init(void) ++{ ++ /* ++ * Some processors have too few contexts to reserve one for ++ * init_mm, and require using context 0 for a normal task. ++ * Other processors reserve the use of context zero for the kernel. ++ * This code assumes FIRST_CONTEXT < 32. ++ */ ++ context_map[0] = (1 << FIRST_CONTEXT) - 1; ++ next_mmu_context = FIRST_CONTEXT; ++ atomic_set(&nr_free_contexts, LAST_CONTEXT - FIRST_CONTEXT + 1); ++} ++ ++/* ++ * Steal a context from a task that has one at the moment. ++ * This is only used on 8xx and 4xx and we presently assume that ++ * they don't do SMP. If they do then thicfpgalloc.hs will have to check ++ * whether the MM we steal is in use. ++ * We also assume that this is only used on systems that don't ++ * use an MMU hash table - this is true for 8xx and 4xx. ++ * This isn't an LRU system, it just frees up each context in ++ * turn (sort-of pseudo-random replacement :). This would be the ++ * place to implement an LRU scheme if anyone was motivated to do it. ++ * -- paulus ++ */ ++void steal_context(void) ++{ ++ struct mm_struct *mm; ++ /* free up context `next_mmu_context' */ ++ /* if we shouldn't free context 0, don't... */ ++ if (next_mmu_context < FIRST_CONTEXT) ++ next_mmu_context = FIRST_CONTEXT; ++ mm = context_mm[next_mmu_context]; ++ flush_tlb_mm(mm); ++ destroy_context(mm); ++} +--- /dev/null ++++ b/arch/m68k/mm/cf-mmu.c.orig +@@ -0,0 +1,265 @@ ++/* ++ * linux/arch/m68k/mm/cf-mmu.c ++ * ++ * Based upon linux/arch/m68k/mm/sun3mmu.c ++ * Based upon linux/arch/ppc/mm/mmu_context.c ++ * ++ * Implementations of mm routines specific to the Coldfire MMU. ++ * ++ * Copyright (c) 2008 Freescale Semiconductor, Inc. ++ */ ++ ++#include <linux/signal.h> ++#include <linux/sched.h> ++#include <linux/mm.h> ++#include <linux/swap.h> ++#include <linux/kernel.h> ++#include <linux/string.h> ++#include <linux/types.h> ++#include <linux/init.h> ++#ifdef CONFIG_BLK_DEV_RAM ++#include <linux/blkdev.h> ++#endif ++#include <linux/bootmem.h> ++ ++#include <asm/setup.h> ++#include <asm/uaccess.h> ++#include <asm/page.h> ++#include <asm/pgtable.h> ++#include <asm/system.h> ++#include <asm/machdep.h> ++#include <asm/io.h> ++#include <asm/mmu_context.h> ++#include <asm/cf_pgalloc.h> ++ ++#include <asm/coldfire.h> ++#include <asm/tlbflush.h> ++ ++#if PAGE_OFFSET == CONFIG_SDRAM_BASE ++#define KERNRAM(x) ((x >= PAGE_OFFSET) && (x < (PAGE_OFFSET + CONFIG_SDRAM_SIZE))) ++#else ++#define KERNRAM(x) (x >= PAGE_OFFSET) ++#endif ++ ++mm_context_t next_mmu_context; ++unsigned long context_map[LAST_CONTEXT / BITS_PER_LONG + 1]; ++ ++atomic_t nr_free_contexts; ++struct mm_struct *context_mm[LAST_CONTEXT+1]; ++void steal_context(void); ++ ++ ++const char bad_pmd_string[] = "Bad pmd in pte_alloc: %08lx\n"; ++ ++extern unsigned long empty_bad_page_table; ++extern unsigned long empty_bad_page; ++extern unsigned long num_pages; ++ ++extern char __init_begin, __init_end; ++ ++void free_initmem(void) ++{ ++#if 0 ++ unsigned long addr; ++ unsigned long start = (unsigned long)&__init_begin; ++ unsigned long end = (unsigned long)&__init_end; ++ ++/* ++ * JKM -- revisit -- the latest round of vmlinux.lds changes has caused ++ * a little grief with how init areas are handled. With the new toolchain ++ * release I'll fix this. ++ */ ++ printk(KERN_INFO "free_initmem: __init_begin = 0x%lx __init_end = 0x%lx\n", start, end); ++ ++ addr = (unsigned long)&__init_begin; ++ for (; addr < (unsigned long)&__init_end; addr += PAGE_SIZE) { ++ /* not currently used */ ++ virt_to_page(addr)->flags &= ~(1 << PG_reserved); ++ init_page_count(virt_to_page(addr)); ++ free_page(addr); ++ totalram_pages++; ++ } ++#endif ++} ++ ++/* Coldfire paging_init derived from sun3 */ ++void __init paging_init(void) ++{ ++ pgd_t * pg_dir; ++ pte_t * pg_table; ++ int i; ++ unsigned long address; ++ unsigned long next_pgtable; ++ unsigned long bootmem_end; ++ unsigned long zones_size[MAX_NR_ZONES]; ++ unsigned long size; ++ enum zone_type zone; ++ ++ empty_zero_page = (void *)alloc_bootmem_pages(PAGE_SIZE); ++ memset((void *)empty_zero_page, 0, PAGE_SIZE); ++ ++ pg_dir = swapper_pg_dir; ++ memset(swapper_pg_dir, 0, sizeof (swapper_pg_dir)); ++ ++ size = num_pages * sizeof(pte_t); ++ size = (size + PAGE_SIZE) & ~(PAGE_SIZE-1); ++ next_pgtable = (unsigned long)alloc_bootmem_pages(size); ++ ++ bootmem_end = (next_pgtable + size + PAGE_SIZE) & PAGE_MASK; ++ pg_dir += PAGE_OFFSET >> PGDIR_SHIFT; ++ ++ address = PAGE_OFFSET; ++ while (address < (unsigned long)high_memory) ++ { ++ pg_table = (pte_t *)next_pgtable; ++ next_pgtable += PTRS_PER_PTE * sizeof (pte_t); ++ pgd_val(*pg_dir) = (unsigned long) pg_table; ++ pg_dir++; ++ ++ /* now change pg_table to kernel virtual addresses */ ++ for (i=0; i<PTRS_PER_PTE; ++i, ++pg_table) ++ { ++ pte_t pte = pfn_pte(virt_to_pfn(address), PAGE_INIT); ++ if (address >= (unsigned long)high_memory) ++ pte_val (pte) = 0; ++ ++ set_pte (pg_table, pte); ++ address += PAGE_SIZE; ++ } ++ } ++ ++ current->mm = NULL; ++ ++ /* clear zones */ ++ for (zone = 0; zone < MAX_NR_ZONES; zone++) ++ zones_size[zone] = 0x0; ++ ++ /* allocate the bottom 32M (0x40x 0x41x) to DMA - head.S marks them NO CACHE */ ++ /* JKM - this should be changed to allocate from the TOP (0x4f,0x4e) but the ++ * allocator is being a bit challenging */ ++ zones_size[ZONE_DMA] = (32*1024*1024) >> PAGE_SHIFT; ++ ++ /* allocate the rest to NORMAL - head.S marks them CACHE */ ++ zones_size[ZONE_NORMAL] = (((unsigned long)high_memory - PAGE_OFFSET) >> PAGE_SHIFT) - zones_size[0]; ++ ++ free_area_init(zones_size); ++} ++ ++ ++int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word) ++{ ++ struct mm_struct *mm; ++ pgd_t *pgd; ++ pmd_t *pmd; ++ pte_t *pte; ++ unsigned long mmuar; ++ int asid; ++ int flags; ++ ++ local_save_flags(flags); ++ local_irq_disable(); ++ ++ mmuar = ( dtlb ) ? regs->mmuar ++ : regs->pc + (extension_word * sizeof(long)); ++ ++ mm = (!user_mode(regs) && KERNRAM(mmuar)) ? &init_mm : current->mm; ++ ++ if (!mm) { ++ local_irq_restore(flags); ++ return (-1); ++ } ++ ++ pgd = pgd_offset(mm, mmuar); ++ if (pgd_none(*pgd)) { ++ local_irq_restore(flags); ++ return (-1); ++ } ++ ++ pmd = pmd_offset(pgd, mmuar); ++ if (pmd_none(*pmd)) { ++ local_irq_restore(flags); ++ return (-1); ++ } ++ ++ pte = (KERNRAM(mmuar)) ? pte_offset_kernel(pmd, mmuar) ++ : pte_offset_map(pmd, mmuar); ++ if (pte_none(*pte) || !pte_present(*pte)) { ++ local_irq_restore(flags); ++ return (-1); ++ } ++ ++ if (write) { ++ if (!pte_write(*pte)) { ++ local_irq_restore(flags); ++ return (-1); ++ } ++ set_pte(pte, pte_mkdirty(*pte)); ++ } ++ ++ set_pte(pte, pte_mkyoung(*pte)); ++ asid = mm->context & 0xff; ++ if (!pte_dirty(*pte) && !KERNRAM(mmuar)) ++ set_pte(pte, pte_wrprotect(*pte)); ++ ++ *MMUTR = (mmuar & PAGE_MASK) | (asid << CF_ASID_MMU_SHIFT) ++ | (((int)(pte->pte) & (int)CF_PAGE_MMUTR_MASK ) >> CF_PAGE_MMUTR_SHIFT) ++ | MMUTR_V; ++ ++ *MMUDR = (pte_val(*pte) & PAGE_MASK) ++ | ((pte->pte) & CF_PAGE_MMUDR_MASK) ++ | MMUDR_SZ8K | MMUDR_X; ++ ++ if ( dtlb ) ++ *MMUOR = MMUOR_ACC | MMUOR_UAA; ++ else ++ *MMUOR = MMUOR_ITLB | MMUOR_ACC | MMUOR_UAA; ++ ++ asm("nop"); ++ ++ /*printk("cf_tlb_miss: va=%lx, pa=%lx\n", (mmuar & PAGE_MASK), ++ (pte_val(*pte) & PAGE_MASK));*/ ++ local_irq_restore(flags); ++ return (0); ++} ++ ++ ++/* The following was taken from arch/ppc/mmu_context.c ++ * ++ * Initialize the context management stuff. ++ */ ++void __init mmu_context_init(void) ++{ ++ /* ++ * Some processors have too few contexts to reserve one for ++ * init_mm, and require using context 0 for a normal task. ++ * Other processors reserve the use of context zero for the kernel. ++ * This code assumes FIRST_CONTEXT < 32. ++ */ ++ context_map[0] = (1 << FIRST_CONTEXT) - 1; ++ next_mmu_context = FIRST_CONTEXT; ++ atomic_set(&nr_free_contexts, LAST_CONTEXT - FIRST_CONTEXT + 1); ++} ++ ++/* ++ * Steal a context from a task that has one at the moment. ++ * This is only used on 8xx and 4xx and we presently assume that ++ * they don't do SMP. If they do then thicfpgalloc.hs will have to check ++ * whether the MM we steal is in use. ++ * We also assume that this is only used on systems that don't ++ * use an MMU hash table - this is true for 8xx and 4xx. ++ * This isn't an LRU system, it just frees up each context in ++ * turn (sort-of pseudo-random replacement :). This would be the ++ * place to implement an LRU scheme if anyone was motivated to do it. ++ * -- paulus ++ */ ++void steal_context(void) ++{ ++ struct mm_struct *mm; ++ /* free up context `next_mmu_context' */ ++ /* if we shouldn't free context 0, don't... */ ++ if (next_mmu_context < FIRST_CONTEXT) ++ next_mmu_context = FIRST_CONTEXT; ++ mm = context_mm[next_mmu_context]; ++ flush_tlb_mm(mm); ++ destroy_context(mm); ++} +--- a/arch/m68k/mm/hwtest.c ++++ b/arch/m68k/mm/hwtest.c +@@ -25,6 +25,7 @@ + + #include <linux/module.h> + ++#ifndef CONFIG_COLDFIRE + int hwreg_present( volatile void *regp ) + { + int ret = 0; +@@ -82,4 +83,5 @@ int hwreg_write( volatile void *regp, un + return( ret ); + } + EXPORT_SYMBOL(hwreg_write); ++#endif + +--- a/arch/m68k/mm/init.c ++++ b/arch/m68k/mm/init.c +@@ -122,7 +122,6 @@ void __init mem_init(void) + if (MACH_IS_ATARI) + atari_stram_mem_init_hook(); + #endif +- + /* this will put all memory onto the freelists */ + totalram_pages = num_physpages = 0; + for_each_online_pgdat(pgdat) { +@@ -146,7 +145,7 @@ void __init mem_init(void) + } + } + +-#ifndef CONFIG_SUN3 ++#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE) + /* insert pointer tables allocated so far into the tablelist */ + init_pointer_table((unsigned long)kernel_pg_dir); + for (i = 0; i < PTRS_PER_PGD; i++) { +--- a/arch/m68k/mm/kmap.c ++++ b/arch/m68k/mm/kmap.c +@@ -24,7 +24,11 @@ + + #undef DEBUG + ++#ifndef CONFIG_COLDFIRE + #define PTRTREESIZE (256*1024) ++#else ++#define PTRTREESIZE PAGE_SIZE ++#endif + + /* + * For 040/060 we can use the virtual memory area like other architectures, +@@ -50,7 +54,11 @@ static inline void free_io_area(void *ad + + #else + ++#ifdef CONFIG_COLDFIRE ++#define IO_SIZE PAGE_SIZE ++#else + #define IO_SIZE (256*1024) ++#endif + + static struct vm_struct *iolist; + +@@ -125,8 +133,34 @@ void __iomem *__ioremap(unsigned long ph + } + #endif + ++#ifdef CONFIG_M5445X ++ if (physaddr >= 0xf0000000) { ++ /* ++ * On the M5445x processors an ACR is setup to map ++ * the 0xF0000000 range into kernel memory as ++ * non-cacheable. ++ */ ++ return (void __iomem *)physaddr; ++ } ++#endif ++ ++#ifdef CONFIG_M547X_8X ++ if (physaddr >= 0xf0000000) { ++ /* ++ * On the M547x/M548x processors an ACR is setup to map ++ * the 0xF0000000 range into kernel memory as ++ * non-cacheable. ++ */ ++ return (void __iomem *)physaddr; ++ } ++ if ((physaddr >= 0xd0000000) && (physaddr + size < 0xd800ffff)) { ++ printk("ioremap:PCI 0x%lx,0x%lx(%d) - PCI area hit\n", physaddr, size, cacheflag); ++ return (void *)physaddr; ++ } ++#endif ++ + #ifdef DEBUG +- printk("ioremap: 0x%lx,0x%lx(%d) - ", physaddr, size, cacheflag); ++ printk("ioremap: paddr=0x%lx,size=0x%lx(%d) - ", physaddr, size, cacheflag); + #endif + /* + * Mappings have to be aligned +@@ -145,7 +179,7 @@ void __iomem *__ioremap(unsigned long ph + virtaddr = (unsigned long)area->addr; + retaddr = virtaddr + offset; + #ifdef DEBUG +- printk("0x%lx,0x%lx,0x%lx", physaddr, virtaddr, retaddr); ++ printk(" paddr=0x%lx,vaddr=0x%lx,retaddr=0x%lx", physaddr, virtaddr, retaddr); + #endif + + /* +@@ -170,7 +204,12 @@ void __iomem *__ioremap(unsigned long ph + break; + } + } else { ++#ifndef CONFIG_COLDFIRE + physaddr |= (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_DIRTY); ++#else ++ physaddr |= (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_DIRTY | \ ++ _PAGE_READWRITE); ++#endif + switch (cacheflag) { + case IOMAP_NOCACHE_SER: + case IOMAP_NOCACHE_NONSER: +@@ -249,7 +288,12 @@ void __iounmap(void *addr, unsigned long + pgd_t *pgd_dir; + pmd_t *pmd_dir; + pte_t *pte_dir; +- ++#ifdef CONFIG_M547X_8X ++ if ((addr >= (void*)0xd0000000) && (addr + size < (void*)0xd800ffff)) { ++ printk("%s: PCI address\n",__FUNCTION__); ++ return; ++ } ++#endif + while ((long)size > 0) { + pgd_dir = pgd_offset_k(virtaddr); + if (pgd_bad(*pgd_dir)) { +--- a/arch/m68k/mm/Makefile ++++ b/arch/m68k/mm/Makefile +@@ -6,3 +6,4 @@ obj-y := cache.o init.o fault.o hwtest. + + obj-$(CONFIG_MMU_MOTOROLA) += kmap.o memory.o motorola.o + obj-$(CONFIG_MMU_SUN3) += sun3kmap.o sun3mmu.o ++obj-$(CONFIG_MMU_CFV4E) += cf-mmu.o kmap.o memory.o +--- a/arch/m68k/mm/memory.c ++++ b/arch/m68k/mm/memory.c +@@ -127,6 +127,7 @@ int free_pointer_table (pmd_t *ptable) + return 0; + } + ++#ifndef CONFIG_COLDFIRE + /* invalidate page in both caches */ + static inline void clear040(unsigned long paddr) + { +@@ -173,6 +174,7 @@ static inline void pushcl040(unsigned lo + clear040(paddr); + local_irq_restore(flags); + } ++#endif /* CONFIG_COLDFIRE */ + + /* + * 040: Hit every page containing an address in the range paddr..paddr+len-1. +@@ -203,6 +205,11 @@ static inline void pushcl040(unsigned lo + + void cache_clear (unsigned long paddr, int len) + { ++#ifdef CONFIG_COLDFIRE ++// JKM -- revise to use proper caching ++// cf_cache_clear(paddr, len); ++ flush_bcache(); ++#else + if (CPU_IS_040_OR_060) { + int tmp; + +@@ -237,6 +244,7 @@ void cache_clear (unsigned long paddr, i + if(mach_l2_flush) + mach_l2_flush(0); + #endif ++#endif /* CONFIG_COLDFIRE */ + } + EXPORT_SYMBOL(cache_clear); + +@@ -250,6 +258,11 @@ EXPORT_SYMBOL(cache_clear); + + void cache_push (unsigned long paddr, int len) + { ++#ifdef CONFIG_COLDFIRE ++// JKM -- revise to use proper caching ++// cf_cache_push(paddr, len); ++ flush_bcache(); ++#else + if (CPU_IS_040_OR_060) { + int tmp = PAGE_SIZE; + +@@ -290,6 +303,7 @@ void cache_push (unsigned long paddr, in + if(mach_l2_flush) + mach_l2_flush(1); + #endif ++#endif /* CONFIG_COLDFIRE */ + } + EXPORT_SYMBOL(cache_push); + +--- a/drivers/ata/Kconfig ++++ b/drivers/ata/Kconfig +@@ -6,7 +6,7 @@ menuconfig ATA + tristate "Serial ATA (prod) and Parallel ATA (experimental) drivers" + depends on HAS_IOMEM + depends on BLOCK +- depends on !(M32R || M68K) || BROKEN ++ depends on !M32R || BROKEN + depends on !SUN4 || BROKEN + select SCSI + ---help--- +@@ -679,4 +679,13 @@ config PATA_BF54X + + If unsure, say N. + ++config PATA_FSL ++ tristate "Freescale on-chip PATA support" ++ depends on (ARCH_MX3 || ARCH_MX27 || PPC_512x || M54455) ++ help ++ On Freescale processors, say Y here if you wish to use the on-chip ++ ATA interface. ++ ++ If you are unsure, say N to this. ++ + endif # ATA +--- a/drivers/ata/Makefile ++++ b/drivers/ata/Makefile +@@ -1,4 +1,3 @@ +- + obj-$(CONFIG_ATA) += libata.o + + obj-$(CONFIG_SATA_AHCI) += ahci.o +@@ -71,6 +70,7 @@ obj-$(CONFIG_PATA_BF54X) += pata_bf54x.o + obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o + obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o + obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o ++obj-$(CONFIG_PATA_FSL) += pata_fsl.o + # Should be last but two libata driver + obj-$(CONFIG_PATA_ACPI) += pata_acpi.o + # Should be last but one libata driver +--- /dev/null ++++ b/drivers/ata/pata_fsl.c +@@ -0,0 +1,814 @@ ++/* ++ * Freescale integrated PATA driver ++ */ ++ ++/* ++ * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. ++ */ ++ ++/* ++ * The code contained herein is licensed under the GNU General Public ++ * License. You may obtain a copy of the GNU General Public License ++ * Version 2 or later at the following locations: ++ * ++ * http://www.opensource.org/licenses/gpl-license.html ++ * http://www.gnu.org/copyleft/gpl.html ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/init.h> ++#include <linux/blkdev.h> ++#include <scsi/scsi_host.h> ++#include <linux/ata.h> ++#include <linux/libata.h> ++#include <linux/platform_device.h> ++#include <linux/fsl_devices.h> ++#ifdef CONFIG_FSL_PATA_USE_DMA ++#include <asm/dma.h> ++#endif ++ ++#define DRV_NAME "pata_fsl" ++#define DRV_VERSION "1.0" ++ ++#ifdef CONFIG_M54455 ++#define WRITE_ATA8(val, reg) \ ++ __raw_writeb(val, (ata_regs + reg)); ++#define WRITE_ATA16(val, reg) \ ++ __raw_writew(val, (ata_regs + reg)); ++#else ++#define WRITE_ATA8(val, reg) \ ++ __raw_writel(val, (ata_regs + reg)); ++#define WRITE_ATA16(val, reg) \ ++ __raw_writel(val, (ata_regs + reg)); ++#endif ++ ++struct pata_fsl_priv { ++#ifdef CONFIG_FSL_PATA_USE_DMA ++ int ultra; ++#endif ++ u8 *fsl_ata_regs; ++#ifdef CONFIG_FSL_PATA_USE_DMA ++ int dma_rchan; ++ int dma_wchan; ++ int dma_done; ++ int dma_dir; ++#endif ++}; ++ ++enum { ++ /* various constants */ ++ ++#ifdef CONFIG_FSL_PATA_USE_DMA ++ FSL_ATA_MAX_SG_LEN = 65534, ++#endif ++ ++ /* offsets to registers */ ++ ++ FSL_ATA_TIMING_REGS = 0x00, ++ FSL_ATA_FIFO_FILL = 0x20, ++ FSL_ATA_CONTROL = 0x24, ++ FSL_ATA_INT_PEND = 0x28, ++ FSL_ATA_INT_EN = 0x2C, ++ FSL_ATA_INT_CLEAR = 0x30, ++ FSL_ATA_FIFO_ALARM = 0x34, ++ FSL_ATA_DRIVE_DATA = 0xA0, ++ FSL_ATA_DRIVE_CONTROL = 0xD8, ++ ++ /* bits within FSL_ATA_CONTROL */ ++ ++ FSL_ATA_CTRL_FIFO_RST_B = 0x80, ++ FSL_ATA_CTRL_ATA_RST_B = 0x40, ++ FSL_ATA_CTRL_FIFO_TX_EN = 0x20, ++ FSL_ATA_CTRL_FIFO_RCV_EN = 0x10, ++ FSL_ATA_CTRL_DMA_PENDING = 0x08, ++ FSL_ATA_CTRL_DMA_ULTRA = 0x04, ++ FSL_ATA_CTRL_DMA_WRITE = 0x02, ++ FSL_ATA_CTRL_IORDY_EN = 0x01, ++ ++ /* bits within the interrupt control registers */ ++ ++ FSL_ATA_INTR_ATA_INTRQ1 = 0x80, ++ FSL_ATA_INTR_FIFO_UNDERFLOW = 0x40, ++ FSL_ATA_INTR_FIFO_OVERFLOW = 0x20, ++ FSL_ATA_INTR_CTRL_IDLE = 0x10, ++ FSL_ATA_INTR_ATA_INTRQ2 = 0x08, ++}; ++ ++/* ++ * This structure contains the timing parameters for ++ * ATA bus timing in the 5 PIO modes. The timings ++ * are in nanoseconds, and are converted to clock ++ * cycles before being stored in the ATA controller ++ * timing registers. ++ */ ++static struct { ++ short t0, t1, t2_8, t2_16, t2i, t4, t9, tA; ++} pio_specs[] = { ++ [0] = { ++ .t0 = 600, .t1 = 70, .t2_8 = 290, .t2_16 = 165, .t2i = 0, ++ .t4 = 30,.t9 = 20,.tA = 50 ++ }, ++ [1] = { ++ .t0 = 383, .t1 = 50, .t2_8 = 290, .t2_16 = 125, .t2i = 0, ++ .t4 = 20, .t9 = 15, .tA = 50 ++ }, ++ [2] = { ++ .t0 = 240, .t1 = 30, .t2_8 = 290, .t2_16 = 100, .t2i = 0, ++ .t4 = 15, .t9 = 10, .tA = 50 ++ }, ++ [3] = { ++ .t0 = 180, .t1 = 30, .t2_8 = 80, .t2_16 = 80, .t2i = 0, ++ .t4 = 10, .t9 = 10, .tA = 50 ++ }, ++ [4] = { ++ .t0 = 120, .t1 = 25, .t2_8 = 70, .t2_16 = 70, .t2i = 0, ++ .t4 = 10, .t9 = 10, .tA = 50 ++ }, ++}; ++ ++#define NR_PIO_SPECS (sizeof pio_specs / sizeof pio_specs[0]) ++ ++/* ++ * This structure contains the timing parameters for ++ * ATA bus timing in the 3 MDMA modes. The timings ++ * are in nanoseconds, and are converted to clock ++ * cycles before being stored in the ATA controller ++ * timing registers. ++ */ ++static struct { ++ short t0M, tD, tH, tJ, tKW, tM, tN, tJNH; ++} mdma_specs[] = { ++ [0] = { ++ .t0M = 480, .tD = 215, .tH = 20, .tJ = 20, .tKW = 215, ++ .tM = 50, .tN = 15, .tJNH = 20 ++ }, ++ [1] = { ++ .t0M = 150, .tD = 80, .tH = 15, .tJ = 5, .tKW = 50, ++ .tM = 30, .tN = 10, .tJNH = 15 ++ }, ++ [2] = { ++ .t0M = 120, .tD = 70, .tH = 10, .tJ = 5, .tKW = 25, ++ .tM = 25, .tN = 10, .tJNH = 10 ++ }, ++}; ++ ++#define NR_MDMA_SPECS (sizeof mdma_specs / sizeof mdma_specs[0]) ++ ++/* ++ * This structure contains the timing parameters for ++ * ATA bus timing in the 6 UDMA modes. The timings ++ * are in nanoseconds, and are converted to clock ++ * cycles before being stored in the ATA controller ++ * timing registers. ++ */ ++static struct { ++ short t2CYC, tCYC, tDS, tDH, tDVS, tDVH, tCVS, tCVH, tFS_min, tLI_max, ++ tMLI, tAZ, tZAH, tENV_min, tSR, tRFS, tRP, tACK, tSS, tDZFS; ++} udma_specs[] = { ++ [0] = { ++ .t2CYC = 235, .tCYC = 114, .tDS = 15, .tDH = 5, .tDVS = 70, ++ .tDVH = 6, .tCVS = 70, .tCVH = 6, .tFS_min = 0, ++ .tLI_max = 100, .tMLI = 20, .tAZ = 10, .tZAH = 20, ++ .tENV_min = 20, .tSR = 50, .tRFS = 75, .tRP = 160, ++ .tACK = 20, .tSS = 50, .tDZFS = 80 ++ }, ++ [1] = { ++ .t2CYC = 156, .tCYC = 75, .tDS = 10, .tDH = 5, .tDVS = 48, ++ .tDVH = 6, .tCVS = 48, .tCVH = 6, .tFS_min = 0, ++ .tLI_max = 100, .tMLI = 20, .tAZ = 10, .tZAH = 20, ++ .tENV_min = 20, .tSR = 30, .tRFS = 70, .tRP = 125, ++ .tACK = 20, .tSS = 50, .tDZFS = 63 ++ }, ++ [2] = { ++ .t2CYC = 117, .tCYC = 55, .tDS = 7, .tDH = 5, .tDVS = 34, ++ .tDVH = 6, .tCVS = 34, .tCVH = 6, .tFS_min = 0, ++ .tLI_max = 100, .tMLI = 20, .tAZ = 10, .tZAH = 20, ++ .tENV_min = 20, .tSR = 20, .tRFS = 60, .tRP = 100, ++ .tACK = 20, .tSS = 50, .tDZFS = 47 ++ }, ++ [3] = { ++ .t2CYC = 86, .tCYC = 39, .tDS = 7, .tDH = 5, .tDVS = 20, ++ .tDVH = 6, .tCVS = 20, .tCVH = 6, .tFS_min = 0, ++ .tLI_max = 100, .tMLI = 20, .tAZ = 10, .tZAH = 20, ++ .tENV_min = 20, .tSR = 20, .tRFS = 60, .tRP = 100, ++ .tACK = 20, .tSS = 50, .tDZFS = 35 ++ }, ++ [4] = { ++ .t2CYC = 57, .tCYC = 25, .tDS = 5, .tDH = 5, .tDVS = 7, ++ .tDVH = 6, .tCVS = 7, .tCVH = 6, .tFS_min = 0, ++ .tLI_max = 100, .tMLI = 20, .tAZ = 10, .tZAH = 20, ++ .tENV_min = 20, .tSR = 50, .tRFS = 60, .tRP = 100, ++ .tACK = 20, .tSS = 50, .tDZFS = 25 ++ }, ++ [5] = { ++ .t2CYC = 38, .tCYC = 17, .tDS = 4, .tDH = 5, .tDVS = 5, ++ .tDVH = 6, .tCVS = 10, .tCVH = 10, .tFS_min = 0, ++ .tLI_max = 75, .tMLI = 20, .tAZ = 10, .tZAH = 20, ++ .tENV_min = 20, .tSR = 20, .tRFS = 50, .tRP = 85, ++ .tACK = 20, .tSS = 50, .tDZFS = 40 ++ }, ++}; ++ ++#define NR_UDMA_SPECS (sizeof udma_specs / sizeof udma_specs[0]) ++ ++struct fsl_ata_time_regs { ++ u8 time_off, time_on, time_1, time_2w; ++ u8 time_2r, time_ax, time_pio_rdx, time_4; ++ u8 time_9, time_m, time_jn, time_d; ++ u8 time_k, time_ack, time_env, time_rpx; ++ u8 time_zah, time_mlix, time_dvh, time_dzfs; ++ u8 time_dvs, time_cvh, time_ss, time_cyc; ++}; ++ ++static void update_timing_config(struct fsl_ata_time_regs *tp, struct ata_host *host) ++{ ++ u32 *lp = (u32 *)tp; ++ struct pata_fsl_priv *priv = host->private_data; ++ u32 *ctlp = (u32 *)priv->fsl_ata_regs; ++ int i; ++ ++ /* ++ * JKM - this could have endianess issues on BE depending ++ * on how the controller is glued to the bus -- probably ++ * should rewrite this to write byte at a time. ++ */ ++ for (i = 0; i < 5; i++) { ++ __raw_writel(*lp, ctlp); ++ lp++; ++ ctlp++; ++ } ++ mb(); ++} ++ ++/*! ++ * Calculate values for the ATA bus timing registers and store ++ * them into the hardware. ++ * ++ * @param xfer_mode specifies XFER xfer_mode ++ * @param pdev specifies platform_device ++ * ++ * @return EINVAL speed out of range, or illegal mode ++ */ ++static int set_ata_bus_timing(u8 xfer_mode, struct platform_device *pdev) ++{ ++ struct fsl_ata_platform_data *plat = (struct fsl_ata_platform_data *) ++ pdev->dev.platform_data; ++ struct ata_host *host = dev_get_drvdata(&pdev->dev); ++ ++ /* get the bus clock cycle time, in ns */ ++ int T = 1 * 1000 * 1000 * 1000 / plat->get_clk_rate(); ++ struct fsl_ata_time_regs tr = {0}; ++ DPRINTK("clk_rate = %d T = %d\n",plat->get_clk_rate(), T); ++ ++ /* ++ * every mode gets the same t_off and t_on ++ */ ++ tr.time_off = 3; ++ tr.time_on = 3; ++ ++ if (xfer_mode >= XFER_UDMA_0) { ++ int speed = xfer_mode - XFER_UDMA_0; ++ if (speed >= NR_UDMA_SPECS) { ++ return -EINVAL; ++ } ++ tr.time_ack = (udma_specs[speed].tACK + T) / T; ++ tr.time_env = (udma_specs[speed].tENV_min + T) / T; ++ tr.time_rpx = (udma_specs[speed].tRP + T) / T + 2; ++ ++ tr.time_zah = (udma_specs[speed].tZAH + T) / T; ++ tr.time_mlix = (udma_specs[speed].tMLI + T) / T; ++ tr.time_dvh = (udma_specs[speed].tDVH + T) / T + 1; ++ tr.time_dzfs = (udma_specs[speed].tDZFS + T) / T; ++ ++ tr.time_dvs = (udma_specs[speed].tDVS + T) / T; ++ tr.time_cvh = (udma_specs[speed].tCVH + T) / T; ++ tr.time_ss = (udma_specs[speed].tSS + T) / T; ++ tr.time_cyc = (udma_specs[speed].tCYC + T) / T; ++ } else if (xfer_mode >= XFER_MW_DMA_0) { ++ int speed = xfer_mode - XFER_MW_DMA_0; ++ if (speed >= NR_MDMA_SPECS) { ++ return -EINVAL; ++ } ++ tr.time_m = (mdma_specs[speed].tM + T) / T; ++ tr.time_jn = (mdma_specs[speed].tJNH + T) / T; ++ tr.time_d = (mdma_specs[speed].tD + T) / T; ++ ++ tr.time_k = (mdma_specs[speed].tKW + T) / T; ++ } else { ++ int speed = xfer_mode - XFER_PIO_0; ++ if (speed >= NR_PIO_SPECS) { ++ return -EINVAL; ++ } ++ tr.time_1 = (pio_specs[speed].t1 + T) / T; ++ tr.time_2w = (pio_specs[speed].t2_8 + T) / T; ++ ++ tr.time_2r = (pio_specs[speed].t2_8 + T) / T; ++ tr.time_ax = (pio_specs[speed].tA + T) / T + 2; ++ tr.time_pio_rdx = 1; ++ tr.time_4 = (pio_specs[speed].t4 + T) / T; ++ ++ tr.time_9 = (pio_specs[speed].t9 + T) / T; ++ } ++ ++ update_timing_config(&tr, host); ++ ++ return 0; ++} ++ ++static void pata_fsl_set_piomode(struct ata_port *ap, struct ata_device *adev) ++{ ++ set_ata_bus_timing(adev->pio_mode, to_platform_device(ap->dev)); ++} ++ ++#ifdef CONFIG_FSL_PATA_USE_DMA ++static void pata_fsl_set_dmamode(struct ata_port *ap, struct ata_device *adev) ++{ ++ struct pata_fsl_priv *priv = ap->host->private_data; ++ ++ priv->ultra = adev->dma_mode >= XFER_UDMA_0; ++ ++ set_ata_bus_timing(adev->dma_mode, to_platform_device(ap->dev)); ++} ++#endif ++ ++static int pata_fsl_port_start(struct ata_port *ap) ++{ ++ return 0; ++} ++ ++#ifdef CONFIG_FSL_PATA_USE_DMA ++static void dma_callback(void *arg, int error_status, unsigned int count) ++{ ++ struct ata_port *ap = arg; ++ struct pata_fsl_priv *priv = ap->host->private_data; ++ u8 *ata_regs = priv->fsl_ata_regs; ++ ++ priv->dma_done = 1; ++ /* ++ * DMA is finished, so unmask INTRQ from the drive to allow the ++ * normal ISR to fire. ++ */ ++#if 0 ++ __raw_writel(FSL_ATA_INTR_ATA_INTRQ2, ata_regs + FSL_ATA_INT_EN); ++#else ++ WRITE_ATA8(FSL_ATA_INTR_ATA_INTRQ2, FSL_ATA_INT_EN); ++#endif ++ mb(); ++} ++ ++static void pata_fsl_bmdma_setup(struct ata_queued_cmd *qc) ++{ ++ int nr_sg = 0; ++ int chan; ++ int dma_mode = 0, dma_ultra; ++ u8 ata_control; ++ struct ata_port *ap = qc->ap; ++ struct pata_fsl_priv *priv = ap->host->private_data; ++ u8 *ata_regs = priv->fsl_ata_regs; ++ struct fsl_ata_platform_data *plat = ap->dev->platform_data; ++ struct scatterlist tmp[plat->max_sg], *tsg, *sg; ++ int err; ++ ++ DPRINTK("ENTER\n"); ++ ++ priv->dma_dir = qc->dma_dir; ++ ++ /* ++ * Configure the on-chip ATA interface hardware. ++ */ ++ dma_ultra = priv->ultra ? ++ FSL_ATA_CTRL_DMA_ULTRA : 0; ++ ++ ata_control = FSL_ATA_CTRL_FIFO_RST_B | ++ FSL_ATA_CTRL_ATA_RST_B | ++ FSL_ATA_CTRL_DMA_PENDING | ++ dma_ultra; ++ ++ if (qc->dma_dir == DMA_TO_DEVICE) { ++ chan = priv->dma_wchan; ++ ata_control |= FSL_ATA_CTRL_FIFO_TX_EN | ++ FSL_ATA_CTRL_DMA_WRITE; ++ dma_mode = DMA_MODE_WRITE; ++ } else { ++ chan = priv->dma_rchan; ++ ata_control |= FSL_ATA_CTRL_FIFO_RCV_EN; ++ dma_mode = DMA_MODE_READ; ++ } ++#if 0 ++ __raw_writel(ata_control, ata_regs + FSL_ATA_CONTROL); ++ __raw_writel(plat->fifo_alarm, ata_regs + FSL_ATA_FIFO_ALARM); ++ __raw_writel(FSL_ATA_INTR_ATA_INTRQ1, ata_regs + FSL_ATA_INT_EN); ++#else ++ WRITE_ATA8(ata_control, FSL_ATA_CONTROL); ++ WRITE_ATA8(plat->fifo_alarm, FSL_ATA_FIFO_ALARM); ++ WRITE_ATA8(FSL_ATA_INTR_ATA_INTRQ1, FSL_ATA_INT_EN); ++#endif ++ mb(); ++ ++ /* ++ * Set up the DMA completion callback. ++ */ ++ mxc_dma_callback_set(chan, dma_callback, (void *)ap); ++ ++ /* ++ * Copy the sg list to an array. ++ */ ++ tsg = tmp; ++ ata_for_each_sg(sg, qc) { ++ memcpy(tsg, sg, sizeof *sg); ++ tsg++; ++ nr_sg++; ++ } ++ ++ err = mxc_dma_sg_config(chan, tmp, nr_sg, 0, dma_mode); ++ if (err) { ++ printk(KERN_ERR "pata_fsl_bmdma_setup: error %d\n", err); ++ } ++ DPRINTK("EXIT\n"); ++} ++ ++static void pata_fsl_bmdma_start(struct ata_queued_cmd *qc) ++{ ++ struct ata_port *ap = qc->ap; ++ struct pata_fsl_priv *priv = ap->host->private_data; ++ int chan; ++ int err; ++ ++ /* ++ * Start the channel. ++ */ ++ chan = qc->dma_dir == DMA_TO_DEVICE ? priv->dma_wchan : priv->dma_rchan; ++ ++ priv->dma_done = 0; ++ ++ err = mxc_dma_enable(chan); ++ if (err) { ++ printk(KERN_ERR "%s: : error %d\n", __func__, err); ++ } ++ ++ ap->ops->exec_command(ap, &qc->tf); ++} ++ ++static void pata_fsl_bmdma_stop(struct ata_queued_cmd *qc) ++{ ++ struct ata_port *ap = qc->ap; ++ ++ /* do a dummy read as in ata_bmdma_stop */ ++ ata_altstatus(ap); ++} ++ ++static u8 pata_fsl_bmdma_status(struct ata_port *ap) ++{ ++ struct pata_fsl_priv *priv = ap->host->private_data; ++ ++ return priv->dma_done ? ATA_DMA_INTR : 0; ++} ++ ++static void pata_fsl_dma_init(struct ata_port *ap) ++{ ++ struct pata_fsl_priv *priv = ap->host->private_data; ++ ++ priv->dma_rchan = -1; ++ priv->dma_wchan = -1; ++ ++ priv->dma_rchan = mxc_dma_request(MXC_DMA_ATA_RX, "MXC ATA RX"); ++ if (priv->dma_rchan < 0) { ++ dev_printk(KERN_ERR, ap->dev, "couldn't get RX DMA channel\n"); ++ goto err_out; ++ } ++ ++ priv->dma_wchan = mxc_dma_request(MXC_DMA_ATA_TX, "MXC ATA TX"); ++ if (priv->dma_wchan < 0) { ++ dev_printk(KERN_ERR, ap->dev, "couldn't get TX DMA channel\n"); ++ goto err_out; ++ } ++ ++ dev_printk(KERN_ERR, ap->dev, "rchan=%d wchan=%d\n", priv->dma_rchan, ++ priv->dma_wchan); ++ return; ++ ++err_out: ++ ap->mwdma_mask = 0; ++ ap->udma_mask = 0; ++ mxc_dma_free(priv->dma_rchan); ++ mxc_dma_free(priv->dma_wchan); ++ kfree(priv); ++} ++#endif /* CONFIG_FSL_PATA_USE_DMA */ ++ ++static void ata_dummy_noret(struct ata_port *ap) { return; } ++ ++static struct scsi_host_template pata_fsl_sht = { ++ .module = THIS_MODULE, ++ .name = DRV_NAME, ++ .ioctl = ata_scsi_ioctl, ++ .queuecommand = ata_scsi_queuecmd, ++ .can_queue = ATA_DEF_QUEUE, ++ .this_id = ATA_SHT_THIS_ID, ++ .sg_tablesize = LIBATA_MAX_PRD, ++ .cmd_per_lun = ATA_SHT_CMD_PER_LUN, ++ .emulated = ATA_SHT_EMULATED, ++ .use_clustering = ATA_SHT_USE_CLUSTERING, ++ .proc_name = DRV_NAME, ++#ifdef CONFIG_FSL_PATA_USE_DMA ++ .dma_boundary = FSL_ATA_MAX_SG_LEN, ++#endif ++ .slave_configure = ata_scsi_slave_config, ++ .slave_destroy = ata_scsi_slave_destroy, ++ .bios_param = ata_std_bios_param, ++}; ++ ++static struct ata_port_operations pata_fsl_port_ops = { ++ .set_piomode = pata_fsl_set_piomode, ++#ifdef CONFIG_FSL_PATA_USE_DMA ++ .set_dmamode = pata_fsl_set_dmamode, ++#endif ++ ++ .tf_load = ata_tf_load, ++ .tf_read = ata_tf_read, ++ .check_status = ata_check_status, ++ .exec_command = ata_exec_command, ++ .dev_select = ata_std_dev_select, ++ ++ .freeze = ata_bmdma_freeze, ++ .thaw = ata_bmdma_thaw, ++ .error_handler = ata_bmdma_error_handler, ++ .post_internal_cmd = ata_bmdma_post_internal_cmd, ++ .cable_detect = ata_cable_unknown, ++ ++#ifdef CONFIG_FSL_PATA_USE_DMA ++ .bmdma_setup = pata_fsl_bmdma_setup, ++ .bmdma_start = pata_fsl_bmdma_start, ++#endif ++ ++ .qc_prep = ata_noop_qc_prep, ++ .qc_issue = ata_qc_issue_prot, ++ ++ .data_xfer = ata_data_xfer_noirq, ++ ++ .irq_clear = ata_dummy_noret, ++ .irq_on = ata_irq_on, ++ ++ .port_start = pata_fsl_port_start, ++ ++#ifdef CONFIG_FSL_PATA_USE_DMA ++ .bmdma_stop = pata_fsl_bmdma_stop, ++ .bmdma_status = pata_fsl_bmdma_status, ++#endif ++}; ++ ++static void fsl_setup_port(struct ata_ioports *ioaddr) ++{ ++ unsigned int shift = 2; ++ ++ ioaddr->data_addr = ioaddr->cmd_addr + (ATA_REG_DATA << shift); ++ ioaddr->error_addr = ioaddr->cmd_addr + (ATA_REG_ERR << shift); ++ ioaddr->feature_addr = ioaddr->cmd_addr + (ATA_REG_FEATURE << shift); ++ ioaddr->nsect_addr = ioaddr->cmd_addr + (ATA_REG_NSECT << shift); ++ ioaddr->lbal_addr = ioaddr->cmd_addr + (ATA_REG_LBAL << shift); ++ ioaddr->lbam_addr = ioaddr->cmd_addr + (ATA_REG_LBAM << shift); ++ ioaddr->lbah_addr = ioaddr->cmd_addr + (ATA_REG_LBAH << shift); ++ ioaddr->device_addr = ioaddr->cmd_addr + (ATA_REG_DEVICE << shift); ++ ioaddr->status_addr = ioaddr->cmd_addr + (ATA_REG_STATUS << shift); ++ ioaddr->command_addr = ioaddr->cmd_addr + (ATA_REG_CMD << shift); ++} ++ ++/** ++ * pata_fsl_probe - attach a platform interface ++ * @pdev: platform device ++ * ++ * Register a platform bus integrated ATA host controller ++ * ++ * The 3 platform device resources are used as follows: ++ * ++ * - I/O Base (IORESOURCE_MEM) virt. addr. of ATA controller regs ++ * - CTL Base (IORESOURCE_MEM) unused ++ * - IRQ (IORESOURCE_IRQ) platform IRQ assigned to ATA ++ * ++ */ ++static int __devinit pata_fsl_probe(struct platform_device *pdev) ++{ ++ struct resource *io_res; ++ struct ata_host *host; ++ struct ata_port *ap; ++ struct fsl_ata_platform_data *plat = (struct fsl_ata_platform_data *) ++ pdev->dev.platform_data; ++ struct pata_fsl_priv *priv; ++ u8 *ata_regs; ++ int ret; ++ ++ DPRINTK("ENTER\n"); ++ /* ++ * Get an ata_host structure for this device ++ */ ++ host = ata_host_alloc(&pdev->dev, 1); ++ if (!host) ++ return -ENOMEM; ++ ap = host->ports[0]; ++ ++ /* ++ * Allocate private data ++ */ ++ priv = kzalloc(sizeof (struct pata_fsl_priv), GFP_KERNEL); ++ if(priv == NULL) { ++ /* free(host); */ ++ return -ENOMEM; ++ } ++ host->private_data = priv; ++ ++ /* ++ * Set up resources ++ */ ++ if (unlikely(pdev->num_resources != 3)) { ++ dev_err(&pdev->dev, "invalid number of resources\n"); ++ return -EINVAL; ++ } ++ ++ io_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ ata_regs = (u8 *)io_res->start; ++ priv->fsl_ata_regs = ata_regs; ++ ap->ioaddr.cmd_addr = (void *)(ata_regs + FSL_ATA_DRIVE_DATA); ++ ap->ioaddr.ctl_addr = (void *)(ata_regs + FSL_ATA_DRIVE_CONTROL); ++ ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr; ++ ap->ops = &pata_fsl_port_ops; ++ ap->pio_mask = 0x7F; ++#ifdef CONFIG_FSL_PATA_USE_DMA ++ ap->mwdma_mask = 0x7F; ++ ap->udma_mask = plat->udma_mask; ++ pata_fsl_sht.sg_tablesize = plat->max_sg; ++#else ++ ap->mwdma_mask = 0x00; ++ ap->udma_mask = 0x00; ++#endif ++ fsl_setup_port(&ap->ioaddr); ++ ++ /* ++ * Do platform-specific initialization (e.g. allocate pins, ++ * turn on clock). After this call it is assumed that ++ * plat->get_clk_rate() can be called to calculate ++ * timing. ++ */ ++ if (plat->init && plat->init(pdev)) { ++ /* REVISIT: don't leak what ata_host_alloc() allocated */ ++ return -ENODEV; ++ } ++ ++ /* Deassert the reset bit to enable the interface */ ++ WRITE_ATA8(FSL_ATA_CTRL_ATA_RST_B, FSL_ATA_CONTROL); ++ mb(); ++ ++ /* Set initial timing and mode */ ++ set_ata_bus_timing(XFER_PIO_4, pdev); ++ ++#ifdef CONFIG_FSL_PATA_USE_DMA ++ /* get DMA ready */ ++ pata_fsl_dma_init(ap); ++#endif ++ ++ /* ++ * Enable the ATA INTRQ interrupt from the bus, but ++ * only allow the CPU to see it (INTRQ2) at this point. ++ * INTRQ1, which goes to the DMA, will be enabled later. ++ */ ++#if 0 ++ __raw_writel(FSL_ATA_INTR_ATA_INTRQ2, ata_regs + FSL_ATA_INT_EN); ++#else ++ WRITE_ATA8(FSL_ATA_INTR_ATA_INTRQ2, FSL_ATA_INT_EN); ++#endif ++ mb(); ++ ++ /* activate */ ++ ret = ata_host_activate(host, platform_get_irq(pdev, 0), ata_interrupt, ++ 0, &pata_fsl_sht); ++ DPRINTK("EXIT ret=%d\n", ret); ++ return ret; ++} ++ ++/** ++ * pata_fsl_remove - unplug a platform interface ++ * @pdev: platform device ++ * ++ * A platform bus ATA device has been unplugged. Perform the needed ++ * cleanup. Also called on module unload for any active devices. ++ */ ++static int __devexit pata_fsl_remove(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct ata_host *host = dev_get_drvdata(dev); ++ struct pata_fsl_priv *priv = host->private_data; ++ struct fsl_ata_platform_data *plat = (struct fsl_ata_platform_data *) ++ pdev->dev.platform_data; ++ u8 *ata_regs = priv->fsl_ata_regs; ++ ++#if 0 ++ __raw_writel(0, ata_regs + FSL_ATA_INT_EN); /* Disable interrupts */ ++#else ++ WRITE_ATA8(0, FSL_ATA_INT_EN); /* Disable interrupts */ ++#endif ++ mb(); ++ ++ ata_host_detach(host); ++ ++ if (plat->exit) ++ plat->exit(); ++ ++ kfree(priv); ++ ++ return 0; ++} ++ ++#ifdef CONFIG_PM ++static int pata_fsl_suspend(struct platform_device *pdev, pm_message_t state) ++{ ++ struct ata_host *host = dev_get_drvdata(&pdev->dev); ++ struct pata_fsl_priv *priv = host->private_data; ++ struct fsl_ata_platform_data *plat = (struct fsl_ata_platform_data *) ++ pdev->dev.platform_data; ++ u8 *ata_regs = priv->fsl_ata_regs; ++ ++ /* Disable interrupts. */ ++#if 0 ++ __raw_writel(0, ata_regs + FSL_ATA_INT_EN); ++#else ++ WRITE_ATA8(0, FSL_ATA_INT_EN); ++#endif ++ mb(); ++ ++ if (plat->exit) ++ plat->exit(); ++ ++ return 0; ++} ++ ++static int pata_fsl_resume(struct platform_device *pdev) ++{ ++ struct ata_host *host = dev_get_drvdata(&pdev->dev); ++ struct pata_fsl_priv *priv = host->private_data; ++ struct fsl_ata_platform_data *plat = (struct fsl_ata_platform_data *) ++ pdev->dev.platform_data; ++ u8 *ata_regs = priv->fsl_ata_regs; ++ ++ if (plat->init && plat->init(pdev)) { ++ return -ENODEV; ++ } ++ ++ /* Deassert the reset bit to enable the interface */ ++#if 0 ++ __raw_writel(FSL_ATA_CTRL_ATA_RST_B, ata_regs + FSL_ATA_CONTROL); ++#else ++ WRITE_ATA8(FSL_ATA_CTRL_ATA_RST_B, FSL_ATA_CONTROL); ++#endif ++ mb(); ++ ++ /* Set initial timing and mode */ ++ set_ata_bus_timing(XFER_PIO_4, pdev); ++ ++ /* ++ * Enable hardware interrupts. ++ */ ++#if 0 ++ __raw_writel(FSL_ATA_INTR_ATA_INTRQ2, ata_regs + FSL_ATA_INT_EN); ++#else ++ WRITE_ATA8(FSL_ATA_INTR_ATA_INTRQ2, FSL_ATA_INT_EN); ++#endif ++ mb(); ++ ++ return 0; ++} ++#endif ++ ++static struct platform_driver pata_fsl_driver = { ++ .probe = pata_fsl_probe, ++ .remove = __devexit_p(pata_fsl_remove), ++#ifdef CONFIG_PM ++ .suspend = pata_fsl_suspend, ++ .resume = pata_fsl_resume, ++#endif ++ .driver = { ++ .name = DRV_NAME, ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init pata_fsl_init(void) ++{ ++ int ret; ++ ++ DPRINTK("ENTER\n"); ++ ret = platform_driver_register(&pata_fsl_driver); ++ DPRINTK("EXIT ret=%d\n", ret); ++ return ret; ++} ++ ++static void __exit pata_fsl_exit(void) ++{ ++ platform_driver_unregister(&pata_fsl_driver); ++} ++module_init(pata_fsl_init); ++module_exit(pata_fsl_exit); ++ ++MODULE_AUTHOR("Freescale Semiconductor, Inc."); ++MODULE_DESCRIPTION("low-level driver for Freescale ATA"); ++MODULE_LICENSE("GPL"); ++MODULE_VERSION(DRV_VERSION); +--- a/drivers/crypto/Kconfig ++++ b/drivers/crypto/Kconfig +@@ -60,6 +60,69 @@ config CRYPTO_DEV_GEODE + To compile this driver as a module, choose M here: the module + will be called geode-aes. + ++config CRYPTO_DEV_MCFCAU ++ bool "Support for Freescale Coldfire Cryptographic Acceleration Unit (CAU)" ++ depends on M5445X ++ select CRYPTO_ALGAPI ++ help ++ The cryptographic acceleration unit (CAU) is a ColdFire coprocessor ++ implementing a set of specialized operations in hardware. For example, you can ++ find it on MCF5445X. ++ ++config CRYPTO_DEV_MCFCAU_DES ++ tristate "DES and Triple DES cipher algorithms (MCF5445X)" ++ depends on CRYPTO_DEV_MCFCAU ++ select CRYPTO_ALGAPI ++ select CRYPTO_BLKCIPHER ++ help ++ DES cipher algorithm (FIPS 46-2), and Triple DES EDE (FIPS 46-3). ++ ++ Say 'Y' here to use the CAU coprocessor for ++ the CryptoAPI DES and 3DES alogrithms. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called mcfcau-des. ++ ++config CRYPTO_DEV_MCFCAU_AES ++ tristate "AES cipher algorithm (MCF5445X)" ++ depends on CRYPTO_DEV_MCFCAU ++ select CRYPTO_ALGAPI ++ select CRYPTO_BLKCIPHER ++ help ++ AES cipher algorithm (FIPS 197). ++ ++ Say 'Y' here to use the CAU coprocessor for ++ the CryptoAPI AES alogrithm. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called mcfcau-aes. ++ ++config CRYPTO_DEV_MCFCAU_MD5 ++ tristate "MD5 digest algorithm (MCF5445X)" ++ depends on CRYPTO_DEV_MCFCAU ++ select CRYPTO_ALGAPI ++ help ++ MD5 message digest algorithm (RFC1321). ++ ++ Say 'Y' here to use the CAU coprocessor for ++ the CryptoAPI MD5 alogrithm. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called mcfcau-md5. ++ ++config CRYPTO_DEV_MCFCAU_SHA1 ++ tristate "SHA1 digest algorithm (MCF5445X)" ++ depends on CRYPTO_DEV_MCFCAU ++ select CRYPTO_ALGAPI ++ help ++ SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2). ++ ++ Say 'Y' here to use the CAU coprocessor for ++ the CryptoAPI SHA1 alogrithm. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called mcfcau-sha1. ++ + config ZCRYPT + tristate "Support for PCI-attached cryptographic adapters" + depends on S390 +--- a/drivers/crypto/Makefile ++++ b/drivers/crypto/Makefile +@@ -2,3 +2,8 @@ obj-$(CONFIG_CRYPTO_DEV_PADLOCK_AES) += + obj-$(CONFIG_CRYPTO_DEV_PADLOCK_SHA) += padlock-sha.o + obj-$(CONFIG_CRYPTO_DEV_GEODE) += geode-aes.o + obj-$(CONFIG_CRYPTO_DEV_HIFN_795X) += hifn_795x.o ++obj-$(CONFIG_CRYPTO_DEV_MCFCAU) += mcfcau.o ++obj-$(CONFIG_CRYPTO_DEV_MCFCAU_DES) += mcfcau-des.o ++obj-$(CONFIG_CRYPTO_DEV_MCFCAU_AES) += mcfcau-aes.o ++obj-$(CONFIG_CRYPTO_DEV_MCFCAU_MD5) += mcfcau-md5.o ++obj-$(CONFIG_CRYPTO_DEV_MCFCAU_SHA1) += mcfcau-sha1.o +--- /dev/null ++++ b/drivers/crypto/mcfcau-aes.c +@@ -0,0 +1,311 @@ ++ /*************************************************************************** ++ * mcfcau-aes.c - Implementation of AES Cipher Algorithm ++ * for Freescale ColdFire Cryptographic Acceleration Unit (CAU). ++ * ++ * Author: Andrey Butok ++ * Copyright Freescale Semiconductor Inc. 2007 ++ * ++ * NOTE: You can find the ColdFire CAU module on MCF5445X and MCF52235. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ++ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ * for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software Foundation, ++ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. ++ * ++ *************************************************************************** ++ * Changes: ++ * v0.01 17 September 2007 Andrey Butok ++ * Initial Release - developed on 2.6.20 Linux kernel. ++ */ ++ ++#include <linux/module.h> ++#include <linux/init.h> ++#include <linux/types.h> ++#include <linux/errno.h> ++#include <linux/crypto.h> ++ ++/* ++#undef DEBUG ++#define DEBUG 1 ++*/ ++ ++#include "mcfcau.h" ++ ++#define MCFCAU_AES_MIN_KEY_SIZE (16) ++#define MCFCAU_AES_MAX_KEY_SIZE (32) ++#define MCFCAU_AES_BLOCK_SIZE (16) ++ ++#define MCFCAU_AES_DRIVER_DESC "AES ColdFire CAU driver" ++#define MCFCAU_AES_DRIVER_VERSION "v0.01" ++ ++struct mcfcau_aes_ctx { ++ int Nr_1; ++ u32 buf[120]; ++ u32 buf_tmp[16]; ++}; ++ ++static u32 mcfcau_rco_tab[10]={ 0x01000000, 0x02000000, 0x04000000, 0x08000000, ++ 0x10000000, 0x20000000, 0x40000000, 0x80000000, ++ 0x1b000000, 0x36000000}; ++ ++int mcfcau_aes_setkey(struct crypto_tfm *tfm, const u8 *in_key, ++ unsigned int key_len) ++{ ++ struct mcfcau_aes_ctx *ctx = crypto_tfm_ctx(tfm); ++ const u32 * key = (const u32 *)in_key; ++ u32 *flags = &tfm->crt_flags; ++ u32 i; ++ u32* key_sch = (&ctx->buf[0]); ++ u32 * temp_p, * rcon_p; ++ u32 Nx; ++ u32 Nk; ++ unsigned long iflags; ++ ++ DBG("\n"); ++ ++ if (key_len % 8) { ++ *flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; ++ return -EINVAL; ++ } ++ ++ Nk = key_len>>2; ++ ++ for(i=0;i<Nk;i++){ ++ key_sch[i] = key[i]; ++ } ++ ++ ctx->Nr_1 = Nk+5; ++ ++ /* Key Expansion */ ++ temp_p=&key_sch[Nk-1]; ++ rcon_p=&mcfcau_rco_tab[0]; ++ ++ spin_lock_irqsave(&mcfcau_lock, iflags); ++ ++ asm volatile ("move.l %0, %%a1"::"m"(temp_p):"a1"); ++ asm volatile ("move.l %0, %%a3"::"m"(rcon_p):"a3"); ++ asm volatile ("move.l %0, %%a4"::"m"(key_sch):"a4"); ++ ++ Nx=(Nk+7)<<2; /* (Nr+1)*Nb */ ++ ++ for(i=Nk; i<Nx; i++) ++ { ++ /* temp = key_sch[Nk-1] */ ++ asm volatile ("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CAA):"a1"); ++ ++ if(i%Nk==0){ ++ asm volatile ("moveq #8, %%d0":::"d0"); ++ /* CAA=RotWord(temp) */ ++ asm volatile ("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA):"d0"); ++ /* SubWord(CAA) */ ++ asm volatile ("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_AESS+MCFCAU_CAA)); ++ /* ACC xor rcon[i/Nk] */ ++ asm volatile ("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CAA):"a3"); ++ ++ }else if((Nk>6) && (i%Nk ==4)){ ++ /* SubWord(ACC) */ ++ asm volatile ("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_AESS+MCFCAU_CAA)); ++ } ++ ++ /* key_sch[i]^=key_sch[i-Nk]; store ACC to key_sch[i] */ ++ asm volatile ("cp0ld.l (%%a4)+,%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CAA):"a4"); ++ asm volatile ("cp0st.l %%d0,(%%a1),#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CAA)); ++ } ++ spin_unlock_irqrestore(&mcfcau_lock, iflags); ++ ++ return 0; ++} ++ ++ ++/* encrypt a block of text */ ++static void mcfcau_aes_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) ++{ ++ struct mcfcau_aes_ctx *ctx = crypto_tfm_ctx(tfm); ++ const int Nr_1 = ctx->Nr_1; ++ ++ u32* key_sch = &(ctx->buf[0]); ++ u32 i; ++ unsigned long iflags; ++ ++ DBG("\n"); ++ ++ spin_lock_irqsave(&mcfcau_lock, iflags); ++ asm("move.l %0, %%a1"::"m"(in):"a1"); ++ asm("move.l %0, %%a0"::"m"(key_sch):"a0"); ++ /* state=in */ ++ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA0):"a1"); ++ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA1):"a1"); ++ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA2):"a1"); ++ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA3):"a1"); ++ /* AddRoundKey() */ ++ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CA0):"a0"); ++ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CA1):"a0"); ++ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CA2):"a0"); ++ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CA3):"a0"); ++ ++ for(i=Nr_1;i>0;i--){ ++ /* SubBytes(state) */ ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_AESS+MCFCAU_CA0)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_AESS+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_AESS+MCFCAU_CA2)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_AESS+MCFCAU_CA3)); ++ /* ShiftRows(state) */ ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_AESR)); ++ /* MixColumns(state); AddRoundKey() */ ++ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_AESC+MCFCAU_CA0):"a0"); ++ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_AESC+MCFCAU_CA1):"a0"); ++ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_AESC+MCFCAU_CA2):"a0"); ++ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_AESC+MCFCAU_CA3):"a0"); ++ } ++ /* SubBytes(state)*/ ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_AESS+MCFCAU_CA0)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_AESS+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_AESS+MCFCAU_CA2)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_AESS+MCFCAU_CA3)); ++ /* ShiftRows(state) */ ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_AESR)); ++ /* AddRoundKey() */ ++ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CA0):"a0"); ++ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CA1):"a0"); ++ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CA2):"a0"); ++ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CA3):"a0"); ++ /* out = state */ ++ asm("move.l %0, %%a1" ::"m"(out):"a1"); ++ asm("cp0st.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA0):"d0"); ++ asm("cp0st.l %%d0,%%d1,#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA1):"d1"); ++ ++ asm("move.l %%d0,(%%a1)+":::"a1"); ++ asm("move.l %%d1,(%%a1)+":::"a1"); ++ ++ asm("cp0st.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA2):"d0"); ++ asm("cp0st.l %%d0,%%d1,#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA3):"d1"); ++ ++ asm("move.l %%d0,(%%a1)+":::"a1"); ++ asm("move.l %%d1,(%%a1)+":::"a1"); ++ spin_unlock_irqrestore(&mcfcau_lock, iflags); ++} ++ ++ ++/* decrypt a block of text */ ++static void mcfcau_aes_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) ++{ ++ struct mcfcau_aes_ctx *ctx = crypto_tfm_ctx(tfm); ++ u32* key_sch = &(ctx->buf[0]); ++ u32 i; ++ unsigned long iflags; ++ const int Nr_1 = ctx->Nr_1; ++ key_sch=&key_sch[(Nr_1+2)*4]; ++ ++ DBG("\n"); ++ ++ spin_lock_irqsave(&mcfcau_lock, iflags); ++ ++ asm("move.l %0, %%a1"::"m"(in):"a1"); ++ asm("move.l %0, %%a0"::"m"(key_sch):"a0"); ++ /* state=in */ ++ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA0):"a1"); ++ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA1):"a1"); ++ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA2):"a1"); ++ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA3):"a1"); ++ /* AddRoundKey() */ ++ asm("cp0ld.l -(%%a0),%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CA3):"a0"); ++ asm("cp0ld.l -(%%a0),%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CA2):"a0"); ++ asm("cp0ld.l -(%%a0),%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CA1):"a0"); ++ asm("cp0ld.l -(%%a0),%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CA0):"a0"); ++ ++ for(i=Nr_1;i>0;i--){ ++ /* InvShiftRows(state) */ ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_AESIR)); ++ /* InvSubBytes(state) */ ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_AESIS+MCFCAU_CA3)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_AESIS+MCFCAU_CA2)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_AESIS+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_AESIS+MCFCAU_CA0)); ++ /* InvMixColumns(state); AddRoundKey() */ ++ asm("cp0ld.l -(%%a0),%%d0,#1,%0" ::"n"(MCFCAU_AESIC+MCFCAU_CA3):"a0"); ++ asm("cp0ld.l -(%%a0),%%d0,#1,%0" ::"n"(MCFCAU_AESIC+MCFCAU_CA2):"a0"); ++ asm("cp0ld.l -(%%a0),%%d0,#1,%0" ::"n"(MCFCAU_AESIC+MCFCAU_CA1):"a0"); ++ asm("cp0ld.l -(%%a0),%%d0,#1,%0" ::"n"(MCFCAU_AESIC+MCFCAU_CA0):"a0"); ++ } ++ /* InvShiftRows(state) */ ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_AESIR)); ++ /* InvSubBytes(state)*/ ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_AESIS+MCFCAU_CA3)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_AESIS+MCFCAU_CA2)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_AESIS+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_AESIS+MCFCAU_CA0)); ++ /* AddRoundKey() */ ++ asm("cp0ld.l -(%%a0),%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CA3):"a0"); ++ asm("cp0ld.l -(%%a0),%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CA2):"a0"); ++ asm("cp0ld.l -(%%a0),%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CA1):"a0"); ++ asm("cp0ld.l -(%%a0),%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CA0):"a0"); ++ /* out = state */ ++ asm("move.l %0, %%a1" ::"m"(out):"a1"); ++ asm("cp0st.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA0):"d0"); ++ asm("cp0st.l %%d0,%%d1,#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA1):"d1"); ++ ++ asm("move.l %%d0,(%%a1)+":::"a1"); ++ asm("move.l %%d1,(%%a1)+":::"a1"); ++ ++ asm("cp0st.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA2):"d0"); ++ asm("cp0st.l %%d0,%%d1,#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA3):"d1"); ++ ++ asm("move.l %%d0,(%%a1)+":::"a1"); ++ asm("move.l %%d1,(%%a1)+":::"a1"); ++ spin_unlock_irqrestore(&mcfcau_lock, iflags); ++ ++} ++ ++ ++static struct crypto_alg mcfcau_aes_alg = { ++ .cra_name = "aes", ++ .cra_driver_name = "aes-mcfcau", ++ .cra_priority = MCFCAU_CRA_PRIORITY, ++ .cra_flags = CRYPTO_ALG_TYPE_CIPHER, ++ .cra_blocksize = MCFCAU_AES_BLOCK_SIZE, ++ .cra_ctxsize = sizeof(struct mcfcau_aes_ctx), ++ .cra_alignmask = 3, ++ .cra_module = THIS_MODULE, ++ .cra_list = LIST_HEAD_INIT(mcfcau_aes_alg.cra_list), ++ .cra_u = { ++ .cipher = { ++ .cia_min_keysize = MCFCAU_AES_MIN_KEY_SIZE, ++ .cia_max_keysize = MCFCAU_AES_MAX_KEY_SIZE, ++ .cia_setkey = mcfcau_aes_setkey, ++ .cia_encrypt = mcfcau_aes_encrypt, ++ .cia_decrypt = mcfcau_aes_decrypt ++ } ++ } ++}; ++ ++static int __init mcfcau_aes_init(void) ++{ ++ int ret = crypto_register_alg(&mcfcau_aes_alg); ++ ++ printk(KERN_INFO MCFCAU_AES_DRIVER_DESC " " ++ MCFCAU_AES_DRIVER_VERSION " %s.\n",ret?"failed":"registered"); ++ return ret; ++} ++ ++static void __exit mcfcau_aes_fini(void) ++{ ++ crypto_unregister_alg(&mcfcau_aes_alg); ++ printk(KERN_INFO MCFCAU_AES_DRIVER_DESC " " ++ MCFCAU_AES_DRIVER_VERSION " unregistered.\n"); ++} ++ ++module_init(mcfcau_aes_init); ++module_exit(mcfcau_aes_fini); ++ ++MODULE_DESCRIPTION(MCFCAU_AES_DRIVER_DESC); ++MODULE_LICENSE("Dual BSD/GPL"); ++MODULE_AUTHOR("Andrey Butok"); +--- /dev/null ++++ b/drivers/crypto/mcfcau.c +@@ -0,0 +1,32 @@ ++/*************************************************************************** ++ * mcfcau.c - Implementation of DES & Triple DES EDE Cipher Algorithms ++ * for Freescale ColdFire Cryptographic Acceleration Unit (CAU). ++ * ++ * Author: Andrey Butok ++ * Copyright Freescale Semiconductor Inc. 2007 ++ * ++ * NOTE: You can find the ColdFire CAU module on MCF5445X and MCF52235. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ++ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ * for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software Foundation, ++ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. ++ * ++ *************************************************************************** ++ * Changes: ++ * v0.01 28 September 2006 Andrey Butok ++ * Initial Release - developed on 2.6.20 Linux kernel. ++ */ ++#include <linux/module.h> ++ ++DEFINE_SPINLOCK(mcfcau_lock); ++EXPORT_SYMBOL(mcfcau_lock); +--- /dev/null ++++ b/drivers/crypto/mcfcau-des.c +@@ -0,0 +1,437 @@ ++/*************************************************************************** ++ * mcfcau-des.c - Implementation of DES & Triple DES EDE Cipher Algorithms ++ * for Freescale ColdFire Cryptographic Acceleration Unit (CAU). ++ * ++ * Author: Andrey Butok ++ * Copyright Freescale Semiconductor Inc. 2007 ++ * ++ * NOTE: You can find the ColdFire CAU module on MCF5445X and MCF52235. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ++ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ * for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software Foundation, ++ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. ++ * ++ *************************************************************************** ++ * Changes: ++ * v0.01 14 August 2007 Andrey Butok ++ * Initial Release - developed on 2.6.20 Linux kernel. ++ */ ++ ++#include <linux/init.h> ++#include <linux/module.h> ++#include <linux/errno.h> ++#include <linux/crypto.h> ++#include <linux/types.h> ++ ++/* ++#undef DEBUG ++#define DEBUG 1 ++*/ ++ ++#include "mcfcau.h" ++ ++#define MCFCAU_DES_KEY_SIZE (8) ++#define MCFCAU_DES_EXPKEY_WORDS (32) ++#define MCFCAU_DES_BLOCK_SIZE (8) ++ ++#define MCFCAU_DES3_EDE_KEY_SIZE (3 * MCFCAU_DES_KEY_SIZE) ++#define MCFCAU_DES3_EDE_EXPKEY_WORDS (3 * MCFCAU_DES_EXPKEY_WORDS) ++#define MCFCAU_DES3_EDE_BLOCK_SIZE (MCFCAU_DES_BLOCK_SIZE) ++ ++#define MCFCAU_DES_DRIVER_DESC "DES & 3DES ColdFire CAU driver" ++#define MCFCAU_DES_DRIVER_VERSION "v0.01" ++ ++struct mcfcau_des_ctx { ++ u32 expkey[MCFCAU_DES_EXPKEY_WORDS]; ++}; ++ ++struct mcfcau_des3_ede_ctx { ++ u32 expkey[MCFCAU_DES3_EDE_EXPKEY_WORDS]; ++}; ++ ++/* DES round operations */ ++static inline void mcfcau_des_encipher(void) ++{ ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESK)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_IP+MCFCAU_KSL1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_FP+MCFCAU_KSL1)); ++} ++ ++static inline void mcfcau_des_decipher(void) ++{ ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESK+MCFCAU_DC)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_IP+MCFCAU_KSR1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_FP+MCFCAU_KSL1)); ++} ++ ++ ++static int mcfcau_des_setkey(struct crypto_tfm *tfm, const u8 *key_p, ++ unsigned int keylen) ++{ ++ struct mcfcau_des_ctx *dctx = crypto_tfm_ctx(tfm); ++ u32 *flags = &tfm->crt_flags; ++ u32 * key = (u32 *) key_p; ++ ++ DBG("\n"); ++ ++ /* ++ * RFC2451: Weak key checks SHOULD be performed. ++ * ++ * FIPS 74: ++ * Keys having duals are keys which produce all zeros, all ones, or ++ * alternating zero-one patterns in the C and D registers after Permuted ++ * Choice 1 has operated on the key. ++ * ++ */ ++ if(*flags & CRYPTO_TFM_REQ_WEAK_KEY){ /* FIPS 74 */ ++ if(key[0]<0xE001E00l){ ++ if(key[0]<0x1FE01FE0){ ++ if(key[0]<0x01E001E0){ ++ if(((key[0]==0x01010101)&&(key[1]==0x01010101))|| ++ ((key[0]==0x011F011F)&&(key[1]==0x010E010E)) ) ++ goto WEAK_KEY; ++ } ++ else{ ++ if(((key[0]==0x01E001E0)&&(key[1]==0x01F101F1))|| ++ ((key[0]==0x01FE01FE)&&(key[1]==0x01FE01FE)) ) ++ goto WEAK_KEY; ++ } ++ } ++ else{ ++ if(key[0]<0x1F1F1F1F){ ++ if(((key[0]==0x1FE01FE0)&&(key[1]==0x0EF10EF1))|| ++ ((key[0]==0x1F011F0l)&&(key[1]==0x0E010E01)) ) ++ goto WEAK_KEY; ++ } ++ else{ ++ if(((key[0]==0x1F1F1F1F)&&(key[1]==0x0E0E0E0E))|| ++ ((key[0]==0x1FFE1FFE)&&(key[1]==0x0EFE0EFE)) ) ++ goto WEAK_KEY; ++ } ++ } ++ } else { ++ if(key[0]<0xFE01FE01){ ++ if(key[0]<0xE0E0E0E0){ ++ if(((key[0]==0xE001E00l)&&(key[1]==0xF101F101))|| ++ ((key[0]==0xE01FE01F)&&(key[1]==0xF10EF10E)) ) ++ goto WEAK_KEY; ++ } ++ else{ ++ if(((key[0]==0xE0E0E0E0)&&(key[1]==0xF1F1F1F1))|| ++ ((key[0]==0xE0FEE0FE)&&(key[1]==0xF1FEF1FE)) ) ++ goto WEAK_KEY; ++ } ++ } ++ else{ ++ if(key[0]<0xFEE0FEE0){ ++ if(((key[0]==0xFE01FE01)&&(key[1]==0xFE01FE01))|| ++ ((key[0]==0xFE1FFE1F)&&(key[1]==0xFE0EFE0E)) ) ++ goto WEAK_KEY; ++ } ++ else{ ++ if(((key[0]==0xFEE0FEE0)&&(key[1]==0xFEF1FEF1))|| ++ ((key[0]==0xFEFEFEFE)&&(key[1]==0xFEFEFEFE)) ) ++ goto WEAK_KEY; ++ } ++ } ++ } ++ } ++ memcpy(dctx->expkey, key_p, keylen); ++ return 0; ++WEAK_KEY: ++ *flags |= CRYPTO_TFM_RES_WEAK_KEY; ++ return -EINVAL; ++} ++ ++ ++void mcfcau_des_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) ++{ ++ struct mcfcau_des_ctx *ctx = crypto_tfm_ctx(tfm); ++ u32 * des_key_tmp = ctx->expkey; ++ unsigned long iflags; ++ ++ DBG("\n"); ++ ++ spin_lock_irqsave(&mcfcau_lock, iflags); ++ ++ asm("move.l %0, %%a0"::"m"(src):"a0"); ++ asm("move.l %0, %%a1"::"m"(des_key_tmp):"a1"); ++ ++ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA2):"a0"); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA3)); ++ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA0):"a1"); ++ asm("cp0ld.l (%%a1),%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA1)); ++ ++ mcfcau_des_encipher(); ++ ++ asm("cp0st.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA2):"d0"); ++ asm("cp0st.l %%d0,%%d1,#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA3):"d1"); ++ asm("move.l %0, %%a1" ::"m"(dst):"a1"); ++ asm("move.l %d0,(%a1)+"); ++ asm("move.l %d1,(%a1)"); ++ ++ spin_unlock_irqrestore(&mcfcau_lock, iflags); ++} ++ ++ ++void mcfcau_des_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) ++{ ++ struct mcfcau_des_ctx *ctx = crypto_tfm_ctx(tfm); ++ u32 * des_key_tmp = ctx->expkey; ++ unsigned long iflags; ++ ++ DBG("\n"); ++ ++ spin_lock_irqsave(&mcfcau_lock, iflags); ++ ++ asm("move.l %0, %%a0"::"m"(src):"a0"); ++ asm("move.l %0, %%a1"::"m"(des_key_tmp):"a1"); ++ ++ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA2):"a0"); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA3)); ++ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA0):"a1"); ++ asm("cp0ld.l (%%a1),%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA1)); ++ ++ mcfcau_des_decipher(); ++ ++ asm("move.l %0, %%a1" ::"m"(dst):"a1"); ++ asm("cp0st.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA2):"d0"); ++ asm("cp0st.l %%d0,%%d1,#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA3):"d1"); ++ asm("move.l %d0,(%a1)+"); ++ asm("move.l %d1,(%a1)"); ++ ++ spin_unlock_irqrestore(&mcfcau_lock, iflags); ++} ++ ++ ++/* ++ * RFC2451: ++ * ++ * For DES-EDE3, there is no known need to reject weak or ++ * complementation keys. Any weakness is obviated by the use of ++ * multiple keys. ++ * ++ * However, if the first two or last two independent 64-bit keys are ++ * equal (k1 == k2 or k2 == k3), then the DES3 operation is simply the ++ * same as DES. Implementers MUST reject keys that exhibit this ++ * property. ++ * ++ */ ++ ++static int mcfcau_des3_ede_setkey(struct crypto_tfm *tfm, const u8 *key_p, unsigned int keylen) ++{ ++ const u32 *key = (const u32 *)key_p; ++ struct mcfcau_des3_ede_ctx *dctx = crypto_tfm_ctx(tfm); ++ u32 *flags = &tfm->crt_flags; ++ ++DBG("\n"); ++ ++ if (unlikely(!((key[0] ^ key[2]) | (key[1] ^ key[3])) || ++ !((key[2] ^ key[4]) | (key[3] ^ key[5])))) ++ { ++ *flags |= CRYPTO_TFM_RES_BAD_KEY_SCHED; ++ return -EINVAL; ++ } ++ ++ memcpy(dctx->expkey,key_p,keylen); ++ ++ return 0; ++} ++ ++static void mcfcau_des3_ede_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) ++{ ++ struct mcfcau_des3_ede_ctx *dctx = crypto_tfm_ctx(tfm); ++ const u32 * des_key_tmp = dctx->expkey; ++ unsigned long iflags; ++ ++ DBG("\n"); ++ ++ spin_lock_irqsave(&mcfcau_lock, iflags); ++ ++ /*EK1*/ ++ asm("move.l %0, %%a0"::"m"(src):"a0"); ++ asm("move.l %0, %%a1"::"m"(des_key_tmp):"a1"); ++ ++ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA2):"a0"); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA3)); ++ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA0):"a1"); ++ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA1):"a1"); ++ ++ mcfcau_des_encipher(); ++ ++ /*DK2*/ ++ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA0):"a1"); ++ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA1):"a1"); ++ ++ mcfcau_des_decipher(); ++ ++ /*EK3*/ ++ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA0):"a1"); ++ asm("cp0ld.l (%%a1),%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA1)); ++ ++ mcfcau_des_encipher(); ++ ++ asm("move.l %0, %%a1" ::"m"(dst):"a1"); ++ asm("cp0st.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA2):"d0"); ++ asm("cp0st.l %%d0,%%d1,#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA3):"d1"); ++ asm("move.l %d0,(%a1)+"); ++ asm("move.l %d1,(%a1)"); ++ ++ spin_unlock_irqrestore(&mcfcau_lock, iflags); ++} ++ ++static void mcfcau_des3_ede_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) ++{ ++ struct mcfcau_des3_ede_ctx *dctx = crypto_tfm_ctx(tfm); ++ const u32 * des_key_tmp = dctx->expkey + 6 - 2; ++ unsigned long iflags; ++ ++ DBG("\n"); ++ ++ spin_lock_irqsave(&mcfcau_lock, iflags); ++ ++ /*DK3*/ ++ asm("move.l %0, %%a0"::"m"(src):"a0"); ++ asm("move.l %0, %%a1"::"m"(des_key_tmp):"a1"); ++ ++ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA2):"a0"); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA3)); ++ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA0):"a1"); ++ asm("cp0ld.l (%%a1),%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA1)); ++ ++ mcfcau_des_decipher(); ++ ++ /*EK2*/ ++ asm("suba.l #12,%a1"); /*dec key pointer*/ ++ ++ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA0):"a1"); ++ asm("cp0ld.l (%%a1),%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA1)); ++ ++ mcfcau_des_encipher(); ++ ++ /*DK1*/ ++ asm("suba.l #12,%a1"); /*dec key pointer*/ ++ ++ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA0):"a1"); ++ asm("cp0ld.l (%%a1),%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA1)); ++ ++ mcfcau_des_decipher(); ++ ++ asm("move.l %0, %%a1" ::"m"(dst):"a1"); ++ asm("cp0st.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA2):"d0"); ++ asm("cp0st.l %%d0,%%d1,#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA3):"d1"); ++ asm("move.l %d0,(%a1)+"); ++ asm("move.l %d1,(%a1)"); ++ ++ spin_unlock_irqrestore(&mcfcau_lock, iflags); ++} ++ ++ ++static struct crypto_alg mcfcau_des_alg = { ++ .cra_name = "des", ++ .cra_driver_name = "des-mcfcau", ++ .cra_priority = MCFCAU_CRA_PRIORITY, ++ .cra_flags = CRYPTO_ALG_TYPE_CIPHER, ++ .cra_blocksize = MCFCAU_DES_BLOCK_SIZE, ++ .cra_ctxsize = sizeof(struct mcfcau_des_ctx), ++ .cra_module = THIS_MODULE, ++ .cra_alignmask = 3, ++ .cra_list = LIST_HEAD_INIT(mcfcau_des_alg.cra_list), ++ .cra_u = { .cipher = { ++ .cia_min_keysize = MCFCAU_DES_KEY_SIZE, ++ .cia_max_keysize = MCFCAU_DES_KEY_SIZE, ++ .cia_setkey = mcfcau_des_setkey, ++ .cia_encrypt = mcfcau_des_encrypt, ++ .cia_decrypt = mcfcau_des_decrypt } } ++}; ++ ++static struct crypto_alg mcfcau_des3_ede_alg = { ++ .cra_name = "des3_ede", ++ .cra_driver_name = "des3_ede-mcfcau", ++ .cra_priority = MCFCAU_CRA_PRIORITY, ++ .cra_flags = CRYPTO_ALG_TYPE_CIPHER, ++ .cra_blocksize = MCFCAU_DES3_EDE_BLOCK_SIZE, ++ .cra_ctxsize = sizeof(struct mcfcau_des3_ede_ctx), ++ .cra_module = THIS_MODULE, ++ .cra_alignmask = 3, ++ .cra_list = LIST_HEAD_INIT(mcfcau_des3_ede_alg.cra_list), ++ .cra_u = { .cipher = { ++ .cia_min_keysize = MCFCAU_DES3_EDE_KEY_SIZE, ++ .cia_max_keysize = MCFCAU_DES3_EDE_KEY_SIZE, ++ .cia_setkey = mcfcau_des3_ede_setkey, ++ .cia_encrypt = mcfcau_des3_ede_encrypt, ++ .cia_decrypt = mcfcau_des3_ede_decrypt } } ++}; ++ ++MODULE_ALIAS("mcfcau_des3_ede"); ++ ++static int __init mcfcau_des_init(void) ++{ ++ int ret; ++ ++ ret = crypto_register_alg(&mcfcau_des_alg); ++ if (ret < 0) ++ goto out; ++ ++ ret = crypto_register_alg(&mcfcau_des3_ede_alg); ++ if (ret < 0) ++ crypto_unregister_alg(&mcfcau_des_alg); ++out: ++ printk(KERN_INFO MCFCAU_DES_DRIVER_DESC " " ++ MCFCAU_DES_DRIVER_VERSION " %s.\n",ret?"failed":"registered"); ++ return ret; ++} ++ ++static void __exit mcfcau_des_exit(void) ++{ ++ crypto_unregister_alg(&mcfcau_des3_ede_alg); ++ crypto_unregister_alg(&mcfcau_des_alg); ++ ++ printk(KERN_INFO MCFCAU_DES_DRIVER_DESC " " ++ MCFCAU_DES_DRIVER_VERSION " unregistered.\n"); ++} ++ ++module_init(mcfcau_des_init); ++module_exit(mcfcau_des_exit); ++ ++MODULE_LICENSE("GPL"); ++MODULE_DESCRIPTION("DES & Triple DES EDE Cipher Algorithms for ColdFire CAU"); ++MODULE_AUTHOR("Andrey Butok"); +--- /dev/null ++++ b/drivers/crypto/mcfcau.h +@@ -0,0 +1,98 @@ ++/*************************************************************************** ++ * mcfcau.h - Common header file for Freescale ColdFire ++ * Cryptographic Acceleration Unit (CAU) drivers. ++ * ++ * Author: Andrey Butok ++ * Copyright Freescale Semiconductor Inc. 2007 ++ * ++ * NOTE: You can find the ColdFire CAU module on MCF5445X and MCF52235. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ++ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ * for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software Foundation, ++ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. ++ * ++ *************************************************************************** ++ * Changes: ++ * v0.01 14 August 2007 Andrey Butok ++ */ ++ ++#ifndef MCFCAU_H ++#define MCFCAU_H ++ ++#include <linux/spinlock.h> ++ ++/* CAU Registers (CAx) */ ++#define MCFCAU_CASR (0x0) ++#define MCFCAU_CAA (0x1) ++#define MCFCAU_CA0 (0x2) ++#define MCFCAU_CA1 (0x3) ++#define MCFCAU_CA2 (0x4) ++#define MCFCAU_CA3 (0x5) ++#define MCFCAU_CA4 (0x6) ++#define MCFCAU_CA5 (0x7) ++ ++ /* CAU Commands */ ++#define MCFCAU_CNOP (0x000) ++#define MCFCAU_LDR (0x010) ++#define MCFCAU_STR (0x020) ++#define MCFCAU_ADR (0x030) ++#define MCFCAU_RADR (0x040) ++#define MCFCAU_ADRA (0x050) ++#define MCFCAU_XOR (0x060) ++#define MCFCAU_ROTL (0x070) ++#define MCFCAU_MVRA (0x080) ++#define MCFCAU_MVAR (0x090) ++#define MCFCAU_AESS (0x0A0) ++#define MCFCAU_AESIS (0x0B0) ++#define MCFCAU_AESC (0x0C0) ++#define MCFCAU_AESIC (0x0D0) ++#define MCFCAU_AESR (0x0E0) ++#define MCFCAU_AESIR (0x0F0) ++#define MCFCAU_DESR (0x100) ++#define MCFCAU_DESK (0x110) ++#define MCFCAU_HASH (0x120) ++#define MCFCAU_SHS (0x130) ++#define MCFCAU_MDS (0x140) ++#define MCFCAU_ILL (0x1F0) ++ ++/* DESR Fields */ ++#define MCFCAU_IP (0x08) /* initial permutation */ ++#define MCFCAU_FP (0x04) /* final permutation */ ++#define MCFCAU_KSL1 (0x00) /* key schedule left 1 bit */ ++#define MCFCAU_KSL2 (0x01) /* key schedule left 2 bits */ ++#define MCFCAU_KSR1 (0x02) /* key schedule right 1 bit */ ++#define MCFCAU_KSR2 (0x03) /* key schedule right 2 bits */ ++ ++/* DESK Field */ ++#define MCFCAU_DC (0x01) /* decrypt key schedule */ ++#define MCFCAU_CP (0x02) /* check parity */ ++ ++/* HASH Functions Codes */ ++#define MCFCAU_HFF (0x0) /* MD5 F() CA1&CA2 | ~CA1&CA3 */ ++#define MCFCAU_HFG (0x1) /* MD5 G() CA1&CA3 | CA2&~CA3 */ ++#define MCFCAU_HFH (0x2) /* MD5 H(), SHA Parity() CA1^CA2^CA3 */ ++#define MCFCAU_HFI (0x3) /* MD5 I() CA2^(CA1|~CA3) */ ++#define MCFCAU_HFC (0x4) /* SHA Ch() CA1&CA2 ^ ~CA1&CA3 */ ++#define MCFCAU_HFM (0x5) /* SHA Maj() CA1&CA2 ^ CA1&CA3 ^ CA2&CA3 */ ++ ++#define MCFCAU_CRA_PRIORITY (300) ++ ++extern spinlock_t mcfcau_lock; ++ ++#ifdef DEBUG ++#define DBG(fmt, args...) printk( "[%s] " fmt , __FUNCTION__, ## args) ++#else ++#define DBG(fmt, args...) do{}while(0) ++#endif ++ ++#endif +--- /dev/null ++++ b/drivers/crypto/mcfcau-md5.c +@@ -0,0 +1,654 @@ ++ /*************************************************************************** ++ * mcfcau-md5.c - Implementation of MD5 Message Digest Algorithm (RFC1321) ++ * for Freescale ColdFire Cryptographic Acceleration Unit (CAU). ++ * ++ * Author: Andrey Butok ++ * Copyright Freescale Semiconductor Inc. 2007 ++ * ++ * NOTE: You can find the ColdFire CAU module on MCF5445X and MCF52235. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ++ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ * for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software Foundation, ++ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. ++ * ++ *************************************************************************** ++ * Changes: ++ * v0.01 30 September 2007 Andrey Butok ++ * Initial Release - developed on 2.6.20 Linux kernel. ++ */ ++#include <linux/init.h> ++#include <linux/module.h> ++#include <linux/string.h> ++#include <linux/crypto.h> ++#include <linux/types.h> ++#include <asm/byteorder.h> ++ ++/* ++#undef DEBUG ++#define DEBUG 1 ++*/ ++ ++#include "mcfcau.h" ++ ++ ++#define MCFCAU_MD5_DIGEST_SIZE (16) ++#define MCFCAU_MD5_HMAC_BLOCK_SIZE (64) ++#define MCFCAU_MD5_BLOCK_WORDS (16) ++#define MCFCAU_MD5_HASH_WORDS (4) ++ ++#define MCFCAU_MD5_DRIVER_DESC "MD5 ColdFire CAU driver" ++#define MCFCAU_MD5_DRIVER_VERSION "v0.01" ++ ++ ++struct mcfcau_md5_ctx { ++ u32 hash[MCFCAU_MD5_HASH_WORDS]; ++ u32 block[MCFCAU_MD5_BLOCK_WORDS]; ++ u64 byte_count; ++}; ++ ++u32 mcfcau_md5_t[64]={0xd76aa478, 0xe8c7b756, 0x242070db, 0xc1bdceee, ++ 0xf57c0faf, 0x4787c62a, 0xa8304613, 0xfd469501, ++ 0x698098d8, 0x8b44f7af, 0xffff5bb1, 0x895cd7be, ++ 0x6b901122, 0xfd987193, 0xa679438e, 0x49b40821, ++ 0xf61e2562, 0xc040b340, 0x265e5a51, 0xe9b6c7aa, ++ 0xd62f105d, 0x02441453, 0xd8a1e681, 0xe7d3fbc8, ++ 0x21e1cde6, 0xc33707d6, 0xf4d50d87, 0x455a14ed, ++ 0xa9e3e905, 0xfcefa3f8, 0x676f02d9, 0x8d2a4c8a, ++ 0xfffa3942, 0x8771f681, 0x6d9d6122, 0xfde5380c, ++ 0xa4beea44, 0x4bdecfa9, 0xf6bb4b60, 0xbebfbc70, ++ 0x289b7ec6, 0xeaa127fa, 0xd4ef3085, 0x04881d05, ++ 0xd9d4d039, 0xe6db99e5, 0x1fa27cf8, 0xc4ac5665, ++ 0xf4292244, 0x432aff97, 0xab9423a7, 0xfc93a039, ++ 0x655b59c3, 0x8f0ccc92, 0xffeff47d, 0x85845dd1, ++ 0x6fa87e4f, 0xfe2ce6e0, 0xa3014314, 0x4e0811a1, ++ 0xf7537e82, 0xbd3af235, 0x2ad7d2bb, 0xeb86d391}; ++ ++ ++ ++static void mcfcau_md5_transform(u32 *hash, u32 const *in) ++{ ++ int i; ++ u32 * md5_t_p=&mcfcau_md5_t[0]; ++ unsigned long iflags; ++ ++ spin_lock_irqsave(&mcfcau_lock, iflags); ++ asm("move.l %0, %%a1"::"m"(hash):"a1"); ++ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CAA):"a1");/*a*/ ++ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA1):"a1");/*b*/ ++ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA2):"a1");/*c*/ ++ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA3):"a1");/*d*/ ++ asm("move.l %0, %%a0"::"m"(in):"a0"); /* X[] */ ++ asm("move.l %0, %%a3"::"m"(md5_t_p):"a3"); /* T[] */ ++ ++ ++ /* Round 1 */ ++ asm("moveq.l #7, %%d4":::"d4"); /* for rotating by 7 */ ++ asm("moveq.l #12, %%d5":::"d5"); /* for rotating by 12 */ ++ asm("moveq.l #17, %%d6":::"d6"); /* for rotating by 17 */ ++ asm("moveq.l #22, %%d7":::"d7"); /* for rotating by 22 */ ++ ++ for(i=0; i<4;i++){ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFF)); /* a+F(b,c,d) */ ++ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); /* add byterev x[i] */ ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); /* add t[i] */ ++ asm("cp0ld.l %%d4,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); /* rotate by 7 */ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); /* add b */ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); /* register to register shift */ ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFF)); ++ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d5,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFF)); ++ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d6,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFF)); ++ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d7,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ }; ++ ++ ++ /* Round 2 */ ++ asm("moveq.l #5, %%d4":::"d4"); /* for rotating by 5 */ ++ asm("moveq.l #9, %%d5":::"d5"); /* for rotating by 9 */ ++ asm("moveq.l #14, %%d6":::"d6"); /* for rotating by 14 */ ++ asm("moveq.l #20, %%d7":::"d7"); /* for rotating by 20 */ ++ ++ asm("lea -60(%%a0),%%a0":::"a0"); ++ ++ for(i=0; i<2;i++){ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFG)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea 20(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d4,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFG)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea 20(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d5,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFG)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea -44(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d6,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFG)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea 20(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d7,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ }; ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFG)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea 20(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d4,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFG)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea -44(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d5,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFG)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea 20(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d6,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFG)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea 20(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d7,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFG)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea -44(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d4,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFG)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea 20(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d5,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFG)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea 20(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d6,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFG)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea -28(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d7,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ ++ /* Round 3 */ ++ asm("moveq.l #4, %%d4":::"d4"); /* for rotating by 5 */ ++ asm("moveq.l #11, %%d5":::"d5"); /* for rotating by 9 */ ++ asm("moveq.l #16, %%d6":::"d6"); /* for rotating by 14 */ ++ asm("moveq.l #23, %%d7":::"d7"); /* for rotating by 20 */ ++ ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFH)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea 12(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d4,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFH)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea 12(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d5,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFH)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea 12(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d6,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFH)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea -52(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d7,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFH)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea 12(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d4,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFH)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea 12(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d5,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFH)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea 12(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d6,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFH)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea 12(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d7,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFH)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea -52(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d4,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFH)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea 12(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d5,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFH)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea 12(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d6,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFH)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea 12(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d7,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFH)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea 12(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d4,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFH)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea 12(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d5,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFH)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea -52(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d6,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFH)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea -8(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d7,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ ++ /* Round 4 */ ++ asm("moveq.l #6, %%d4":::"d4"); /* for rotating by 6 */ ++ asm("moveq.l #10, %%d5":::"d5"); /* for rotating by 10 */ ++ asm("moveq.l #15, %%d6":::"d6"); /* for rotating by 15 */ ++ asm("moveq.l #21, %%d7":::"d7"); /* for rotating by 21 */ ++ ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFI)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea 28(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d4,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFI)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea 28(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d5,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFI)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea -36(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d6,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFI)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea 28(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d7,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFI)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea -36(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d4,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFI)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea 28(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d5,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFI)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea -36(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d6,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFI)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea 28(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d7,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFI)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea 28(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d4,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFI)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea -36(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d5,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFI)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea 28(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d6,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFI)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea -36(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d7,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFI)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea 28(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d4,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFI)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea -36(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d5,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFI)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea 28(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d6,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFI)); ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); ++ asm("lea 28(%%a0),%%a0" :::"a0"); ++ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); ++ asm("cp0ld.l %%d7,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); ++ ++ ++ asm("move.l %0, %%a1"::"m"(hash):"a1"); ++ ++ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a1");/*a*/ ++ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CA1):"a1");/*b*/ ++ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CA2):"a1");/*c*/ ++ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CA3):"a1");/*d*/ ++ ++ asm("cp0st.l %%d0,-(%%a1),#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA3):"a1");/*d*/ ++ asm("cp0st.l %%d0,-(%%a1),#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA2):"a1");/*c*/ ++ asm("cp0st.l %%d0,-(%%a1),#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA1):"a1");/*b*/ ++ asm("cp0st.l %%d0,-(%%a1),#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CAA):"a1");/*a*/ ++ spin_unlock_irqrestore(&mcfcau_lock, iflags); ++} ++ ++static inline void le32_to_cpu_array(u32 *buf, unsigned int words) ++{ ++ while (words--) { ++ __le32_to_cpus(buf); ++ buf++; ++ } ++} ++ ++static inline void cpu_to_le32_array(u32 *buf, unsigned int words) ++{ ++ while (words--) { ++ __cpu_to_le32s(buf); ++ buf++; ++ } ++} ++ ++static void mcfcau_md5_initialization(struct crypto_tfm *tfm) ++{ ++ struct mcfcau_md5_ctx *mctx = crypto_tfm_ctx(tfm); ++ ++ DBG("\n"); ++ mctx->hash[0] = 0x67452301; ++ mctx->hash[1] = 0xefcdab89; ++ mctx->hash[2] = 0x98badcfe; ++ mctx->hash[3] = 0x10325476; ++ mctx->byte_count = 0; ++} ++ ++static void mcfcau_md5_update(struct crypto_tfm *tfm, const u8 *data, unsigned int len) ++{ ++ struct mcfcau_md5_ctx *mctx = crypto_tfm_ctx(tfm); ++ const u32 avail = sizeof(mctx->block) - (mctx->byte_count & 0x3f); ++ ++ DBG("\n"); ++ mctx->byte_count += len; ++ ++ if (avail > len) { ++ memcpy((char *)mctx->block + (sizeof(mctx->block) - avail), ++ data, len); ++ } ++ else { ++ memcpy((char *)mctx->block + (sizeof(mctx->block) - avail), data, avail); ++ ++ mcfcau_md5_transform(mctx->hash, mctx->block); ++ data += avail; ++ len -= avail; ++ ++ while (len >= sizeof(mctx->block)) { ++ memcpy(mctx->block, data, sizeof(mctx->block)); ++ mcfcau_md5_transform(mctx->hash, mctx->block); ++ data += sizeof(mctx->block); ++ len -= sizeof(mctx->block); ++ } ++ ++ memcpy(mctx->block, data, len); ++ } ++} ++ ++static void mcfcau_md5_final(struct crypto_tfm *tfm, u8 *out) ++{ ++ struct mcfcau_md5_ctx *mctx = crypto_tfm_ctx(tfm); ++ const unsigned int offset = mctx->byte_count & 0x3f; ++ char *p = (char *)mctx->block + offset; ++ int padding = 56 - (offset + 1); ++ ++ DBG("\n"); ++ ++ *p++ = 0x80; ++ if (padding < 0) { ++ memset(p, 0x00, padding + sizeof (u64)); ++ mcfcau_md5_transform(mctx->hash, mctx->block); ++ p = (char *)mctx->block; ++ padding = 56; ++ } ++ ++ memset(p, 0, padding); ++ mctx->block[14] = mctx->byte_count << 3; ++ mctx->block[15] = mctx->byte_count >> 29; ++ le32_to_cpu_array(&mctx->block[14], 2); ++ ++ mcfcau_md5_transform(mctx->hash, mctx->block); ++ ++ cpu_to_le32_array(mctx->hash, sizeof(mctx->hash) / sizeof(u32)); ++ memcpy(out, mctx->hash, sizeof(mctx->hash)); ++ memset(mctx, 0, sizeof(*mctx)); ++} ++ ++static struct crypto_alg mcfcau_md5_alg = { ++ .cra_name = "md5", ++ .cra_driver_name = "md5-mcfcau", ++ .cra_priority = MCFCAU_CRA_PRIORITY, ++ .cra_flags = CRYPTO_ALG_TYPE_DIGEST, ++ .cra_blocksize = MCFCAU_MD5_HMAC_BLOCK_SIZE, ++ .cra_ctxsize = sizeof(struct mcfcau_md5_ctx), ++ .cra_module = THIS_MODULE, ++ .cra_list = LIST_HEAD_INIT(mcfcau_md5_alg.cra_list), ++ .cra_u = { .digest = { ++ .dia_digestsize = MCFCAU_MD5_DIGEST_SIZE, ++ .dia_init = mcfcau_md5_initialization, ++ .dia_update = mcfcau_md5_update, ++ .dia_final = mcfcau_md5_final } } ++}; ++ ++static int __init mcfcau_md5_init(void) ++{ ++ int ret = crypto_register_alg(&mcfcau_md5_alg); ++ printk(KERN_INFO MCFCAU_MD5_DRIVER_DESC " " ++ MCFCAU_MD5_DRIVER_VERSION " %s.\n",ret?"failed":"registered"); ++ return ret; ++} ++ ++static void __exit mcfcau_md5_exit(void) ++{ ++ crypto_unregister_alg(&mcfcau_md5_alg); ++ printk(KERN_INFO MCFCAU_MD5_DRIVER_DESC " " ++ MCFCAU_MD5_DRIVER_VERSION " unregistered.\n"); ++} ++ ++module_init(mcfcau_md5_init); ++module_exit(mcfcau_md5_exit); ++ ++MODULE_LICENSE("GPL"); ++MODULE_DESCRIPTION(MCFCAU_MD5_DRIVER_DESC); ++MODULE_AUTHOR("Andrey Butok"); +--- /dev/null ++++ b/drivers/crypto/mcfcau-sha1.c +@@ -0,0 +1,280 @@ ++ /*************************************************************************** ++ * mcfcau-sha1.c - Implementation of SHA1 Secure Hash Algorithm ++ * for Freescale ColdFire Cryptographic Acceleration Unit (CAU). ++ * ++ * Author: Andrey Butok ++ * Copyright Freescale Semiconductor Inc. 2007 ++ * ++ * NOTE: You can find the ColdFire CAU module on MCF5445X and MCF52235. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ++ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ * for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software Foundation, ++ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. ++ * ++ *************************************************************************** ++ * Changes: ++ * v0.01 15 October 2007 Andrey Butok ++ * Initial Release - developed on 2.6.20 Linux kernel. ++ */ ++ ++#include <linux/init.h> ++#include <linux/module.h> ++#include <linux/mm.h> ++#include <linux/crypto.h> ++#include <linux/types.h> ++ ++ ++/* ++#undef DEBUG ++#define DEBUG 1 ++*/ ++ ++#include "mcfcau.h" ++ ++#define MCFCAU_SHA1_DIGEST_WORDS (5) ++#define MCFCAU_SHA1_WORKSPACE_WORDS (80) ++ ++#define MCFCAU_SHA1_DIGEST_SIZE (20) ++#define MCFCAU_SHA1_HMAC_BLOCK_SIZE (64) ++ ++#define MCFCAU_SHA1_DRIVER_DESC "SHA1 ColdFire CAU driver" ++#define MCFCAU_SHA1_DRIVER_VERSION "v0.01" ++ ++struct mcfcau_sha1_ctx { ++ u64 count; ++ u32 state[5]; ++ u8 buffer[64]; ++}; ++ ++const static u32 K[4]={0x5A827999L, /* Rounds 0-19: sqrt(2) * 2^30 */ ++ 0x6ED9EBA1L, /* Rounds 20-39: sqrt(3) * 2^30 */ ++ 0x8F1BBCDCL, /* Rounds 40-59: sqrt(5) * 2^30 */ ++ 0xCA62C1D6L}; /* Rounds 60-79: sqrt(10) * 2^30 */ ++ ++static void noinline mcfcau_sha1_transform(__u32 *digest, const char *in, __u32 *W) ++{ ++ int i; ++ u32 * tmp_p; ++ unsigned long iflags; ++ ++ /* (a) Devide M(i) into 16 words W */ ++ for (i = 0; i < 16; i++) ++ W[i] = ((const u32 *)in)[i]; ++ ++ /* (b) W[i+16] = S^1(W[i+13] ^ W[i+8] ^ W[i+2] ^ W[i]) */ ++ tmp_p=&W[16]; ++ ++ spin_lock_irqsave(&mcfcau_lock, iflags); ++ asm("move.l %0, %%a0"::"m"(tmp_p):"a0"); ++ asm("moveq.l #1, %%d3":::"d3"); ++ ++ for (i = 0; i < 64; i++){ ++ asm("cp0ld.l -64(%%a0),%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA0)); ++ asm("cp0ld.l -56(%%a0),%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CA0)); ++ asm("cp0ld.l -32(%%a0),%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CA0)); ++ asm("cp0ld.l -12(%%a0),%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CA0)); ++ asm("cp0ld.l %%d3,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CA0):"d3"); ++ asm("cp0st.l %%d0,(%%a0)+,#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA0)); ++ } ++ ++ /* (c) */ ++ asm("move.l %0, %%a0"::"m"(digest):"a0"); ++ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA0):"a0"); /* a */ ++ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA1):"a0"); /* b */ ++ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA2):"a0"); /* c */ ++ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA3):"a0"); /* d */ ++ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA4):"a0"); /* e */ ++ ++ /* (d) */ ++ asm("moveq.l #5, %%d0":::"d0"); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MVRA+MCFCAU_CA0)); ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); /*S^5(A)*/ ++ ++ tmp_p=(u32*)K; ++ asm("move.l %0, %%a0"::"m"(tmp_p):"a0"); ++ asm("move.l %0, %%a1"::"m"(W):"a1"); ++ ++ for (i = 0; i < 20; i++) { ++ /* t = f1(b, c, d) + K1 + rol32(a, 5) + e + W[i]; */ ++ /* e = d; d = c; c = rol32(b, 30); b = a; a = t; */ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFC)); /*f(b,c,d)*/ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA4)); /*+e*/ ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA)); /*+K*/ ++ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a1"); /*+W*/ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_SHS)); ++ } ++ ++ asm("add.l #4,%%a0" :::"a0"); /* update K */ ++ ++ for (; i < 40; i ++) { ++ /* t = f2(b, c, d) + K2 + rol32(a, 5) + e + W[i]; */ ++ /* e = d; d = c; c = rol32(b, 30); b = a; a = t; */ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFH)); /*f(b,c,d)*/ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA4)); /*+e*/ ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA)); /*+K*/ ++ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a1"); /*+W*/ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_SHS)); ++ } ++ ++ asm("add.l #4,%%a0" :::"a0"); /* update K */ ++ ++ for (; i < 60; i ++) { ++ /* t = f3(b, c, d) + K3 + rol32(a, 5) + e + W[i]; */ ++ /* e = d; d = c; c = rol32(b, 30); b = a; a = t; */ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFM)); /*f(b,c,d)*/ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA4)); /*+e*/ ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA)); /*+K*/ ++ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a1"); /*+W*/ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_SHS)); ++ } ++ ++ asm("add.l #4,%%a0" :::"a0"); /* update K */ ++ ++ for (; i < 80; i ++) { ++ /* t = f2(b, c, d) + K4 + rol32(a, 5) + e + W[i]; */ ++ /* e = d; d = c; c = rol32(b, 30); b = a; a = t; */ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFH)); /*f(b,c,d)*/ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA4)); /*+e*/ ++ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA)); /*+K*/ ++ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a1"); /*+W*/ ++ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_SHS)); ++ } ++ ++ /* (e) */ ++ asm("move.l %0, %%a0"::"m"(digest):"a0"); ++ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CA0):"a0"); /* +a */ ++ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CA1):"a0"); /* +b */ ++ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CA2):"a0"); /* +c */ ++ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CA3):"a0"); /* +d */ ++ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CA4):"a0"); /* +e */ ++ ++ asm("cp0st.l %%d0,-(%%a0),#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA4):"a0"); ++ asm("cp0st.l %%d0,-(%%a0),#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA3):"a0"); ++ asm("cp0st.l %%d0,-(%%a0),#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA2):"a0"); ++ asm("cp0st.l %%d0,-(%%a0),#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA1):"a0"); ++ asm("cp0st.l %%d0,-(%%a0),#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA0):"a0"); ++ spin_unlock_irqrestore(&mcfcau_lock, iflags); ++} ++ ++static void mcfcau_sha1_init(struct crypto_tfm *tfm) ++{ ++ struct mcfcau_sha1_ctx *sctx = crypto_tfm_ctx(tfm); ++ static const struct mcfcau_sha1_ctx initstate = { ++ 0, ++ { 0x67452301, 0xEFCDAB89, 0x98BADCFE, 0x10325476, 0xC3D2E1F0 }, ++ { 0, } ++ }; ++ ++ *sctx = initstate; ++} ++ ++static void mcfcau_sha1_update(struct crypto_tfm *tfm, const u8 *data, ++ unsigned int len) ++{ ++ struct mcfcau_sha1_ctx *sctx = crypto_tfm_ctx(tfm); ++ unsigned int partial, done; ++ const u8 *src; ++ ++ partial = sctx->count & 0x3f; ++ sctx->count += len; ++ done = 0; ++ src = data; ++ ++ if ((partial + len) > 63) { ++ u32 temp[MCFCAU_SHA1_WORKSPACE_WORDS]; ++ ++ if (partial) { ++ done = -partial; ++ memcpy(sctx->buffer + partial, data, done + 64); ++ src = sctx->buffer; ++ } ++ ++ do { ++ mcfcau_sha1_transform(sctx->state, src, temp); ++ done += 64; ++ src = data + done; ++ } while (done + 63 < len); ++ ++ memset(temp, 0, sizeof(temp)); ++ partial = 0; ++ } ++ memcpy(sctx->buffer + partial, src, len - done); ++} ++ ++ ++/* Add padding and return the message digest. */ ++static void mcfcau_sha1_final(struct crypto_tfm *tfm, u8 *out) ++{ ++ struct mcfcau_sha1_ctx *sctx = crypto_tfm_ctx(tfm); ++ u32 *dst = (u32 *)out; ++ u32 i, index, padlen; ++ u64 bits; ++ static const u8 padding[64] = { 0x80, }; ++ ++ bits = sctx->count << 3; ++ ++ /* Pad out to 56 mod 64 */ ++ index = sctx->count & 0x3f; ++ padlen = (index < 56) ? (56 - index) : ((64+56) - index); ++ mcfcau_sha1_update(tfm, padding, padlen); ++ ++ /* Append length */ ++ mcfcau_sha1_update(tfm, (const u8 *)&bits, sizeof(bits)); ++ ++ /* Store state in digest */ ++ for (i = 0; i < 5; i++) ++ dst[i] = sctx->state[i]; ++ ++ ++ /* Wipe context */ ++ memset(sctx, 0, sizeof *sctx); ++} ++ ++static struct crypto_alg mcfcau_sha1_alg = { ++ .cra_name = "sha1", ++ .cra_driver_name= "sha1-mcfcau", ++ .cra_priority = MCFCAU_CRA_PRIORITY, ++ .cra_flags = CRYPTO_ALG_TYPE_DIGEST, ++ .cra_blocksize = MCFCAU_SHA1_HMAC_BLOCK_SIZE, ++ .cra_ctxsize = sizeof(struct mcfcau_sha1_ctx), ++ .cra_module = THIS_MODULE, ++ .cra_alignmask = 3, ++ .cra_list = LIST_HEAD_INIT(mcfcau_sha1_alg.cra_list), ++ .cra_u = { .digest = { ++ .dia_digestsize = MCFCAU_SHA1_DIGEST_SIZE, ++ .dia_init = mcfcau_sha1_init, ++ .dia_update = mcfcau_sha1_update, ++ .dia_final = mcfcau_sha1_final } } ++}; ++ ++static int __init init(void) ++{ ++ int ret = crypto_register_alg(&mcfcau_sha1_alg); ++ printk(KERN_INFO MCFCAU_SHA1_DRIVER_DESC " " ++ MCFCAU_SHA1_DRIVER_VERSION " %s.\n",ret?"failed":"registered"); ++ return ret; ++} ++ ++static void __exit fini(void) ++{ ++ crypto_unregister_alg(&mcfcau_sha1_alg); ++ printk(KERN_INFO MCFCAU_SHA1_DRIVER_DESC " " ++ MCFCAU_SHA1_DRIVER_VERSION " unregistered.\n"); ++} ++ ++module_init(init); ++module_exit(fini); ++ ++MODULE_LICENSE("GPL"); ++MODULE_DESCRIPTION(MCFCAU_SHA1_DRIVER_DESC); ++MODULE_AUTHOR("Andrey Butok"); +--- a/drivers/dma/Makefile ++++ b/drivers/dma/Makefile +@@ -4,3 +4,5 @@ obj-$(CONFIG_INTEL_IOATDMA) += ioatdma.o + ioatdma-objs := ioat.o ioat_dma.o ioat_dca.o + obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o + obj-$(CONFIG_FSL_DMA) += fsldma.o ++obj-$(CONFIG_MCD_DMA) += mcddma.o ++mcddma-objs := MCD_dmaApi.o MCD_tasks.o MCD_tasksInit.o +--- /dev/null ++++ b/drivers/dma/MCD_dmaApi.c +@@ -0,0 +1,965 @@ ++/* ++ * drivers/dma/MCD_dmaApi.c ++ * ++ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. ++ * Kurt Mahan <kmahan@freescale.com> ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include "MCD_dma.h" ++#include "MCD_tasksInit.h" ++#include "MCD_progCheck.h" ++ ++/********************************************************************/ ++/* ++ * This is an API-internal pointer to the DMA's registers ++ */ ++dmaRegs *MCD_dmaBar; ++ ++/* ++ * These are the real and model task tables as generated by the ++ * build process ++ */ ++extern TaskTableEntry MCD_realTaskTableSrc[NCHANNELS]; ++extern TaskTableEntry MCD_modelTaskTableSrc[NUMOFVARIANTS]; ++ ++/* ++ * However, this (usually) gets relocated to on-chip SRAM, at which ++ * point we access them as these tables ++ */ ++volatile TaskTableEntry *MCD_taskTable; ++TaskTableEntry *MCD_modelTaskTable; ++ ++ ++/* ++ * MCD_chStatus[] is an array of status indicators for remembering ++ * whether a DMA has ever been attempted on each channel, pausing ++ * status, etc. ++ */ ++static int MCD_chStatus[NCHANNELS] = ++{ ++ MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA, ++ MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA, ++ MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA, ++ MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA ++}; ++ ++/* ++ * Prototypes for local functions ++ */ ++static void MCD_memcpy (int *dest, int *src, u32 size); ++static void MCD_resmActions (int channel); ++ ++/* ++ * Buffer descriptors used for storage of progress info for single Dmas ++ * Also used as storage for the DMA for CRCs for single DMAs ++ * Otherwise, the DMA does not parse these buffer descriptors ++ */ ++#ifdef MCD_INCLUDE_EU ++extern MCD_bufDesc MCD_singleBufDescs[NCHANNELS]; ++#else ++MCD_bufDesc MCD_singleBufDescs[NCHANNELS]; ++#endif ++MCD_bufDesc *MCD_relocBuffDesc; ++ ++ ++/* ++ * Defines for the debug control register's functions ++ */ ++#define DBG_CTL_COMP1_TASK (0x00002000) /* have comparator 1 look for a task # */ ++#define DBG_CTL_ENABLE (DBG_CTL_AUTO_ARM | \ ++ DBG_CTL_BREAK | \ ++ DBG_CTL_INT_BREAK | \ ++ DBG_CTL_COMP1_TASK) ++#define DBG_CTL_DISABLE (DBG_CTL_AUTO_ARM | \ ++ DBG_CTL_INT_BREAK | \ ++ DBG_CTL_COMP1_TASK) ++#define DBG_KILL_ALL_STAT (0xFFFFFFFF) ++ ++/* ++ * Offset to context save area where progress info is stored ++ */ ++#define CSAVE_OFFSET 10 ++ ++/* ++ * Defines for Byte Swapping ++ */ ++#define MCD_BYTE_SWAP_KILLER 0xFFF8888F ++#define MCD_NO_BYTE_SWAP_ATALL 0x00040000 ++ ++/* ++ * Execution Unit Identifiers ++ */ ++#define MAC 0 /* legacy - not used */ ++#define LUAC 1 /* legacy - not used */ ++#define CRC 2 /* legacy - not used */ ++#define LURC 3 /* Logic Unit with CRC */ ++ ++/* ++ * Task Identifiers ++ */ ++#define TASK_CHAINNOEU 0 ++#define TASK_SINGLENOEU 1 ++#ifdef MCD_INCLUDE_EU ++#define TASK_CHAINEU 2 ++#define TASK_SINGLEEU 3 ++#define TASK_FECRX 4 ++#define TASK_FECTX 5 ++#else ++#define TASK_CHAINEU 0 ++#define TASK_SINGLEEU 1 ++#define TASK_FECRX 2 ++#define TASK_FECTX 3 ++#endif ++ ++/* ++ * Structure to remember which variant is on which channel ++ */ ++typedef struct MCD_remVariants_struct MCD_remVariant; ++struct MCD_remVariants_struct ++{ ++ int remDestRsdIncr[NCHANNELS]; /* -1,0,1 */ ++ int remSrcRsdIncr[NCHANNELS]; /* -1,0,1 */ ++ s16 remDestIncr[NCHANNELS]; /* DestIncr */ ++ s16 remSrcIncr[NCHANNELS]; /* srcIncr */ ++ u32 remXferSize[NCHANNELS]; /* xferSize */ ++}; ++ ++/* ++ * Structure to remember the startDma parameters for each channel ++ */ ++MCD_remVariant MCD_remVariants; ++ ++/********************************************************************/ ++/* ++ * Function: MCD_initDma ++ * Purpose: Initializes the DMA API by setting up a pointer to the DMA ++ * registers, relocating and creating the appropriate task ++ * structures, and setting up some global settings ++ * Arguments: ++ * dmaBarAddr - pointer to the multichannel DMA registers ++ * taskTableDest - location to move DMA task code and structs to ++ * flags - operational parameters ++ * Return Value: ++ * MCD_TABLE_UNALIGNED if taskTableDest is not 512-byte aligned ++ * MCD_OK otherwise ++ */ ++extern u32 MCD_funcDescTab0[]; ++ ++int MCD_initDma (dmaRegs *dmaBarAddr, void *taskTableDest, u32 flags) ++{ ++ int i; ++ TaskTableEntry *entryPtr; ++ ++ /* Setup the local pointer to register set */ ++ MCD_dmaBar = dmaBarAddr; ++ ++ /* Do we need to move/create a task table */ ++ if ((flags & MCD_RELOC_TASKS) != 0) ++ { ++ int fixedSize; ++ u32 *fixedPtr; ++ int varTabsOffset, funcDescTabsOffset, contextSavesOffset; ++ int taskDescTabsOffset; ++ int taskTableSize, varTabsSize, funcDescTabsSize, contextSavesSize; ++ int taskDescTabSize; ++ ++ int i; ++ ++ /* Check if physical address is aligned on 512 byte boundary */ ++ if (((u32)taskTableDest & 0x000001ff) != 0) ++ return(MCD_TABLE_UNALIGNED); ++ ++ MCD_taskTable = taskTableDest; /* set up local pointer to task Table */ ++ ++ /* ++ * Create a task table: ++ * - compute aligned base offsets for variable tables and ++ * function descriptor tables, then ++ * - loop through the task table and setup the pointers ++ * - copy over model task table with the the actual task descriptor ++ * tables ++ */ ++ taskTableSize = NCHANNELS * sizeof(TaskTableEntry); ++ /* Align variable tables to size */ ++ varTabsOffset = taskTableSize + (u32)taskTableDest; ++ if ((varTabsOffset & (VAR_TAB_SIZE - 1)) != 0) ++ varTabsOffset = (varTabsOffset + VAR_TAB_SIZE) & (~VAR_TAB_SIZE); ++ /* Align function descriptor tables */ ++ varTabsSize = NCHANNELS * VAR_TAB_SIZE; ++ funcDescTabsOffset = varTabsOffset + varTabsSize; ++ ++ if ((funcDescTabsOffset & (FUNCDESC_TAB_SIZE - 1)) != 0) ++ funcDescTabsOffset = (funcDescTabsOffset + FUNCDESC_TAB_SIZE) & ++ (~FUNCDESC_TAB_SIZE); ++ ++ funcDescTabsSize = FUNCDESC_TAB_NUM * FUNCDESC_TAB_SIZE; ++ contextSavesOffset = funcDescTabsOffset + funcDescTabsSize; ++ contextSavesSize = (NCHANNELS * CONTEXT_SAVE_SIZE); ++ fixedSize = taskTableSize + varTabsSize + funcDescTabsSize + ++ contextSavesSize; ++ ++ /* Zero the thing out */ ++ fixedPtr = (u32 *)taskTableDest; ++ for (i = 0;i<(fixedSize/4);i++) ++ fixedPtr[i] = 0; ++ ++ entryPtr = (TaskTableEntry*)MCD_taskTable; ++ /* Set up fixed pointers */ ++ for (i = 0; i < NCHANNELS; i++) ++ { ++ entryPtr[i].varTab = (u32)varTabsOffset; /* update ptr to local value */ ++ entryPtr[i].FDTandFlags = (u32)funcDescTabsOffset | MCD_TT_FLAGS_DEF; ++ entryPtr[i].contextSaveSpace = (u32)contextSavesOffset; ++ varTabsOffset += VAR_TAB_SIZE; ++#ifdef MCD_INCLUDE_EU /* if not there is only one, just point to the same one */ ++ funcDescTabsOffset += FUNCDESC_TAB_SIZE; ++#endif ++ contextSavesOffset += CONTEXT_SAVE_SIZE; ++ } ++ /* Copy over the function descriptor table */ ++ for ( i = 0; i < FUNCDESC_TAB_NUM; i++) ++ { ++ MCD_memcpy((void*)(entryPtr[i].FDTandFlags & ~MCD_TT_FLAGS_MASK), ++ (void*)MCD_funcDescTab0, FUNCDESC_TAB_SIZE); ++ } ++ ++ /* Copy model task table to where the context save stuff leaves off */ ++ MCD_modelTaskTable = (TaskTableEntry*)contextSavesOffset; ++ ++ MCD_memcpy ((void*)MCD_modelTaskTable, (void*)MCD_modelTaskTableSrc, ++ NUMOFVARIANTS * sizeof(TaskTableEntry)); ++ ++ /* Point to local version of model task table */ ++ entryPtr = MCD_modelTaskTable; ++ taskDescTabsOffset = (u32)MCD_modelTaskTable + ++ (NUMOFVARIANTS * sizeof(TaskTableEntry)); ++ ++ /* Copy actual task code and update TDT ptrs in local model task table */ ++ for (i = 0; i < NUMOFVARIANTS; i++) ++ { ++ taskDescTabSize = entryPtr[i].TDTend - entryPtr[i].TDTstart + 4; ++ MCD_memcpy ((void*)taskDescTabsOffset, (void*)entryPtr[i].TDTstart, taskDescTabSize); ++ entryPtr[i].TDTstart = (u32)taskDescTabsOffset; ++ taskDescTabsOffset += taskDescTabSize; ++ entryPtr[i].TDTend = (u32)taskDescTabsOffset - 4; ++ } ++#ifdef MCD_INCLUDE_EU ++ /* ++ * Tack single DMA BDs onto end of code so API controls where ++ * they are since DMA might write to them ++ */ ++ MCD_relocBuffDesc = (MCD_bufDesc*)(entryPtr[NUMOFVARIANTS - 1].TDTend + 4); ++#else ++ /* ++ * DMA does not touch them so they can be wherever and we don't need to ++ * waste SRAM on them ++ */ ++ MCD_relocBuffDesc = MCD_singleBufDescs; ++#endif ++ } ++ else ++ { ++ /* ++ * Point the would-be relocated task tables and the buffer descriptors ++ * to the ones the linker generated ++ */ ++ if (((u32)MCD_realTaskTableSrc & 0x000001ff) != 0) ++ return(MCD_TABLE_UNALIGNED); ++ ++ entryPtr = MCD_realTaskTableSrc; ++ for (i = 0; i < NCHANNELS; i++) ++ { ++ if (((entryPtr[i].varTab & (VAR_TAB_SIZE - 1)) != 0) || ++ ((entryPtr[i].FDTandFlags & (FUNCDESC_TAB_SIZE - 1)) != 0)) ++ return(MCD_TABLE_UNALIGNED); ++ } ++ ++ MCD_taskTable = MCD_realTaskTableSrc; ++ MCD_modelTaskTable = MCD_modelTaskTableSrc; ++ MCD_relocBuffDesc = MCD_singleBufDescs; ++ } ++ ++ /* Make all channels inactive, and remember them as such: */ ++ MCD_dmaBar->taskbar = (u32) MCD_taskTable; ++ for (i = 0; i < NCHANNELS; i++) ++ { ++ MCD_dmaBar->taskControl[i] = 0x0; ++ MCD_chStatus[i] = MCD_NO_DMA; ++ } ++ ++ /* Set up pausing mechanism to inactive state: */ ++ MCD_dmaBar->debugComp1 = 0; ++ MCD_dmaBar->debugComp2 = 0; ++ MCD_dmaBar->debugControl = DBG_CTL_DISABLE; ++ MCD_dmaBar->debugStatus = DBG_KILL_ALL_STAT; ++ ++ /* Enable or disable commbus prefetch */ ++ if ((flags & MCD_COMM_PREFETCH_EN) != 0) ++ MCD_dmaBar->ptdControl &= ~PTD_CTL_COMM_PREFETCH; ++ else ++ MCD_dmaBar->ptdControl |= PTD_CTL_COMM_PREFETCH; ++ ++ return(MCD_OK); ++} ++/*********************** End of MCD_initDma() ***********************/ ++ ++/********************************************************************/ ++/* Function: MCD_dmaStatus ++ * Purpose: Returns the status of the DMA on the requested channel ++ * Arguments: channel - channel number ++ * Returns: Predefined status indicators ++ */ ++int MCD_dmaStatus (int channel) ++{ ++ u16 tcrValue; ++ ++ if((channel < 0) || (channel >= NCHANNELS)) ++ return(MCD_CHANNEL_INVALID); ++ ++ tcrValue = MCD_dmaBar->taskControl[channel]; ++ if ((tcrValue & TASK_CTL_EN) == 0) ++ { /* Nothing running if last reported with task enabled */ ++ if ( MCD_chStatus[channel] == MCD_RUNNING ++ || MCD_chStatus[channel] == MCD_IDLE) ++ MCD_chStatus[channel] = MCD_DONE; ++ } ++ else /* something is running */ ++ { ++ /* There are three possibilities: paused, running or idle. */ ++ if ( MCD_chStatus[channel] == MCD_RUNNING ++ || MCD_chStatus[channel] == MCD_IDLE) ++ { ++ MCD_dmaBar->ptdDebug = PTD_DBG_TSK_VLD_INIT; ++ /* Determine which initiator is asserted. */ ++ if ((MCD_dmaBar->ptdDebug >> channel ) & 0x1 ) ++ MCD_chStatus[channel] = MCD_RUNNING; ++ else ++ MCD_chStatus[channel] = MCD_IDLE; ++ /* Do not change the status if it is already paused */ ++ } ++ } ++ return MCD_chStatus[channel]; ++} ++/******************** End of MCD_dmaStatus() ************************/ ++ ++/********************************************************************/ ++/* Function: MCD_startDma ++ * Ppurpose: Starts a particular kind of DMA ++ * Arguments: see below ++ * Returns: MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK ++ */ ++ ++int MCD_startDma ( ++ int channel, /* the channel on which to run the DMA */ ++ s8 *srcAddr, /* the address to move data from, or physical buffer-descriptor address */ ++ s16 srcIncr, /* the amount to increment the source address per transfer */ ++ s8 *destAddr, /* the address to move data to */ ++ s16 destIncr, /* the amount to increment the destination address per transfer */ ++ u32 dmaSize, /* the number of bytes to transfer independent of the transfer size */ ++ u32 xferSize, /* the number bytes in of each data movement (1, 2, or 4) */ ++ u32 initiator, /* what device initiates the DMA */ ++ int priority, /* priority of the DMA */ ++ u32 flags, /* flags describing the DMA */ ++ u32 funcDesc /* a description of byte swapping, bit swapping, and CRC actions */ ++#ifdef MCD_NEED_ADDR_TRANS ++ s8 *srcAddrVirt /* virtual buffer descriptor address TBD*/ ++#endif ++) ++{ ++ int srcRsdIncr, destRsdIncr; ++ int *cSave; ++ short xferSizeIncr; ++ int tcrCount = 0; ++#ifdef MCD_INCLUDE_EU ++ u32 *realFuncArray; ++#endif ++ ++ if((channel < 0) || (channel >= NCHANNELS)) ++ return(MCD_CHANNEL_INVALID); ++ ++#ifndef MCD_INCLUDE_EU ++ funcDesc = MCD_FUNC_NOEU1; ++#endif ++ ++#ifdef MCD_DEBUG ++printf("startDma:Setting up params\n"); ++#endif ++ ++ /* Enable task-wise priority */ ++ MCD_dmaBar->ptdControl |= (u16) 0x8000; ++ ++ /* Calculate additional parameters to the regular DMA calls. */ ++ srcRsdIncr = srcIncr < 0 ? -1 : (srcIncr > 0 ? 1 : 0); ++ destRsdIncr = destIncr < 0 ? -1 : (destIncr > 0 ? 1 : 0); ++ xferSizeIncr = (xferSize & 0xffff) | 0x20000000; ++ ++ /* Remember which variant is running for each channel */ ++ MCD_remVariants.remSrcRsdIncr[channel] = srcRsdIncr; ++ MCD_remVariants.remDestRsdIncr[channel] = destRsdIncr; ++ MCD_remVariants.remDestIncr[channel] = destIncr; ++ MCD_remVariants.remSrcIncr[channel] = srcIncr; ++ MCD_remVariants.remXferSize[channel] = xferSize; ++ ++ cSave = (int*)(MCD_taskTable[channel].contextSaveSpace) ++ + CSAVE_OFFSET ++ + CURRBD; ++ ++#ifdef MCD_INCLUDE_EU ++ realFuncArray = (u32 *) (MCD_taskTable[channel].FDTandFlags & 0xffffff00); ++ ++ /* ++ * Modify the LURC's normal and byte-residue-loop functions ++ * according to parameter. ++ */ ++ switch (xferSize) ++ { ++ case 4: ++ realFuncArray[(LURC*16)] = funcDesc; ++ break; ++ case 2: ++ realFuncArray[(LURC*16)] = funcDesc & 0xfffff00f; ++ break; ++ case 1: ++ default: ++ realFuncArray[(LURC*16)] = funcDesc & 0xffff000f; ++ break; ++ } ++ ++ realFuncArray[(LURC*16+1)] = 0 ++ | (funcDesc & MCD_BYTE_SWAP_KILLER) ++ | MCD_NO_BYTE_SWAP_ATALL; ++#endif ++ ++ /* Write the initiator field in the TCR and set the initiator-hold bit*/ ++ MCD_dmaBar->taskControl[channel] = 0 ++ | (initiator << 8) ++ | TASK_CTL_HIPRITSKEN ++ | TASK_CTL_HLDINITNUM; ++ ++ /* ++ * Current versions of the MPC8220 MCD have a hardware quirk that could ++ * cause the write to the TCR to collide with an MDE access to the ++ * initiator-register file, so we have to verify that the write occurred ++ * correctly by reading back the value. On MCF547x/8x devices and any ++ * future revisions of the MPC8220, this loop will not be entered. ++ */ ++ while(((MCD_dmaBar->taskControl[channel] & 0x1fff) != ++ ((initiator << 8) | TASK_CTL_HIPRITSKEN | TASK_CTL_HLDINITNUM)) && ++ (tcrCount < 1000)) ++ { ++ tcrCount++; ++ MCD_dmaBar->taskControl[channel] = 0 ++ | (initiator << 8) ++ | TASK_CTL_HIPRITSKEN ++ | TASK_CTL_HLDINITNUM; ++ } ++ ++ MCD_dmaBar->priority[channel] = (u8)priority & PRIORITY_PRI_MASK; ++ ++ if (channel < 8 && channel >= 0) ++ { ++ MCD_dmaBar->taskSize0 &= ~(0xf << (7-channel)*4); ++ MCD_dmaBar->taskSize0 |= (xferSize & 3) << (((7 - channel)*4) + 2); ++ MCD_dmaBar->taskSize0 |= (xferSize & 3) << ((7 - channel)*4); ++ } ++ else ++ { ++ MCD_dmaBar->taskSize1 &= ~(0xf << (15-channel)*4); ++ MCD_dmaBar->taskSize1 |= (xferSize & 3) << (((15 - channel)*4) + 2); ++ MCD_dmaBar->taskSize1 |= (xferSize & 3) << ((15 - channel)*4); ++ } ++ ++ /* Setup task table flags/options */ ++ MCD_taskTable[channel].FDTandFlags &= ~MCD_TT_FLAGS_MASK; ++ MCD_taskTable[channel].FDTandFlags |= (MCD_TT_FLAGS_MASK & flags); ++ ++ if (flags & MCD_FECTX_DMA) ++ { ++ /* TDTStart and TDTEnd */ ++ MCD_taskTable[channel].TDTstart = MCD_modelTaskTable[TASK_FECTX].TDTstart; ++ MCD_taskTable[channel].TDTend = MCD_modelTaskTable[TASK_FECTX].TDTend; ++ MCD_startDmaENetXmit(srcAddr, srcAddr, destAddr, MCD_taskTable, channel); ++ } ++ else if (flags & MCD_FECRX_DMA) ++ { ++ /* TDTStart and TDTEnd */ ++ MCD_taskTable[channel].TDTstart = MCD_modelTaskTable[TASK_FECRX].TDTstart; ++ MCD_taskTable[channel].TDTend = MCD_modelTaskTable[TASK_FECRX].TDTend; ++ MCD_startDmaENetRcv(srcAddr, srcAddr, destAddr, MCD_taskTable, channel); ++ } ++ else if(flags & MCD_SINGLE_DMA) ++ { ++ /* ++ * This buffer descriptor is used for storing off initial parameters ++ * for later progress query calculation and for the DMA to write the ++ * resulting checksum. The DMA does not use this to determine how to ++ * operate, that info is passed with the init routine ++ */ ++ MCD_relocBuffDesc[channel].srcAddr = srcAddr; ++ MCD_relocBuffDesc[channel].destAddr = destAddr; ++ MCD_relocBuffDesc[channel].lastDestAddr = destAddr; ++ MCD_relocBuffDesc[channel].dmaSize = dmaSize; ++ MCD_relocBuffDesc[channel].flags = 0; /* not used */ ++ MCD_relocBuffDesc[channel].csumResult = 0; /* not used */ ++ MCD_relocBuffDesc[channel].next = 0; /* not used */ ++ ++ /* Initialize the progress-querying stuff to show no progress:*/ ++ ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[SRCPTR + CSAVE_OFFSET] ++ = (int)srcAddr; ++ ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[DESTPTR + CSAVE_OFFSET] ++ = (int)destAddr; ++ ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[DCOUNT + CSAVE_OFFSET] ++ = 0; ++ ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[CURRBD + CSAVE_OFFSET] ++ = (u32) &(MCD_relocBuffDesc[channel]); ++ ++ if( funcDesc == MCD_FUNC_NOEU1 || funcDesc == MCD_FUNC_NOEU2) ++ { ++ /* TDTStart and TDTEnd */ ++ MCD_taskTable[channel].TDTstart = MCD_modelTaskTable[TASK_SINGLENOEU].TDTstart; ++ MCD_taskTable[channel].TDTend = MCD_modelTaskTable[TASK_SINGLENOEU].TDTend; ++ MCD_startDmaSingleNoEu(srcAddr, srcIncr, destAddr, destIncr, dmaSize, ++ xferSizeIncr, flags, (int *)&(MCD_relocBuffDesc[channel]), ++ cSave, MCD_taskTable, channel); ++ } ++ else ++ { ++ /* TDTStart and TDTEnd */ ++ MCD_taskTable[channel].TDTstart = MCD_modelTaskTable[TASK_SINGLEEU].TDTstart; ++ MCD_taskTable[channel].TDTend = MCD_modelTaskTable[TASK_SINGLEEU].TDTend; ++ MCD_startDmaSingleEu(srcAddr, srcIncr, destAddr, destIncr, dmaSize, ++ xferSizeIncr, flags, (int *)&(MCD_relocBuffDesc[channel]), ++ cSave, MCD_taskTable, channel); ++ } ++ } ++ else /* Chained DMA */ ++ { ++ /* Initialize the progress-querying stuff to show no progress:*/ ++#if 1 /* (!defined(MCD_NEED_ADDR_TRANS)) */ ++ ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[SRCPTR + CSAVE_OFFSET] ++ = (int)((MCD_bufDesc*) srcAddr)->srcAddr; ++ ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[DESTPTR + CSAVE_OFFSET] ++ = (int)((MCD_bufDesc*) srcAddr)->destAddr; ++#else /* if using address translation, need the virtual addr of the first buffdesc */ ++ ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[SRCPTR + CSAVE_OFFSET] ++ = (int)((MCD_bufDesc*) srcAddrVirt)->srcAddr; ++ ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[DESTPTR + CSAVE_OFFSET] ++ = (int)((MCD_bufDesc*) srcAddrVirt)->destAddr; ++#endif ++ ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[DCOUNT + CSAVE_OFFSET] ++ = 0; ++ ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[CURRBD + CSAVE_OFFSET] ++ = (u32) srcAddr; ++ ++ if( funcDesc == MCD_FUNC_NOEU1 || funcDesc == MCD_FUNC_NOEU2) ++ { ++ /* TDTStart and TDTEnd */ ++ MCD_taskTable[channel].TDTstart = MCD_modelTaskTable[TASK_CHAINNOEU].TDTstart; ++ MCD_taskTable[channel].TDTend = MCD_modelTaskTable[TASK_CHAINNOEU].TDTend; ++ MCD_startDmaChainNoEu((int *)srcAddr, srcIncr, destIncr, xferSize, ++ xferSizeIncr, cSave, MCD_taskTable, channel); ++ } ++ else ++ { ++ /* TDTStart and TDTEnd */ ++ MCD_taskTable[channel].TDTstart = MCD_modelTaskTable[TASK_CHAINEU].TDTstart; ++ MCD_taskTable[channel].TDTend = MCD_modelTaskTable[TASK_CHAINEU].TDTend; ++ MCD_startDmaChainEu((int *)srcAddr, srcIncr, destIncr, xferSize, ++ xferSizeIncr, cSave, MCD_taskTable, channel); ++ } ++ } ++ ++ MCD_chStatus[channel] = MCD_IDLE; ++ return(MCD_OK); ++} ++ ++/************************ End of MCD_startDma() *********************/ ++ ++/********************************************************************/ ++/* Function: MCD_XferProgrQuery ++ * Purpose: Returns progress of DMA on requested channel ++ * Arguments: channel - channel to retrieve progress for ++ * progRep - pointer to user supplied MCD_XferProg struct ++ * Returns: MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK ++ * ++ * Notes: ++ * MCD_XferProgrQuery() upon completing or after aborting a DMA, or ++ * while the DMA is in progress, this function returns the first ++ * DMA-destination address not (or not yet) used in the DMA. When ++ * encountering a non-ready buffer descriptor, the information for ++ * the last completed descriptor is returned. ++ * ++ * MCD_XferProgQuery() has to avoid the possibility of getting ++ * partially-updated information in the event that we should happen ++ * to query DMA progress just as the DMA is updating it. It does that ++ * by taking advantage of the fact context is not saved frequently for ++ * the most part. We therefore read it at least twice until we get the ++ * same information twice in a row. ++ * ++ * Because a small, but not insignificant, amount of time is required ++ * to write out the progress-query information, especially upon ++ * completion of the DMA, it would be wise to guarantee some time lag ++ * between successive readings of the progress-query information. ++ */ ++ ++/* ++ * How many iterations of the loop below to execute to stabilize values ++ */ ++#define STABTIME 0 ++ ++int MCD_XferProgrQuery (int channel, MCD_XferProg *progRep) ++{ ++ MCD_XferProg prevRep; ++ int again; /* true if we are to try again to get consistent results */ ++ int i; /* used as a time-waste counter */ ++ int destDiffBytes; /* Total number of bytes that we think actually got xfered. */ ++ int numIterations; /* number of iterations */ ++ int bytesNotXfered; /* bytes that did not get xfered. */ ++ s8 *LWAlignedInitDestAddr, *LWAlignedCurrDestAddr; ++ int subModVal, addModVal; /* Mode values to added and subtracted from the ++ final destAddr */ ++ ++ if((channel < 0) || (channel >= NCHANNELS)) ++ return(MCD_CHANNEL_INVALID); ++ ++ /* Read a trial value for the progress-reporting values*/ ++ prevRep.lastSrcAddr = ++ (s8 *) ((volatile int*) MCD_taskTable[channel].contextSaveSpace)[SRCPTR + CSAVE_OFFSET]; ++ prevRep.lastDestAddr = ++ (s8 *) ((volatile int*) MCD_taskTable[channel].contextSaveSpace)[DESTPTR + CSAVE_OFFSET]; ++ prevRep.dmaSize = ((volatile int*) MCD_taskTable[channel].contextSaveSpace)[DCOUNT + CSAVE_OFFSET]; ++ prevRep.currBufDesc = ++ (MCD_bufDesc*) ((volatile int*) MCD_taskTable[channel].contextSaveSpace)[CURRBD + CSAVE_OFFSET]; ++ ++ /* Repeatedly reread those values until they match previous values: */ ++ do { ++ /* Take a little bit of time to ensure stability: */ ++ for (i = 0; i < STABTIME; i++) ++ i += i >> 2; /* make sure this loop does something so that it ++ doesn't get optimized out */ ++ /* Check them again: */ ++ progRep->lastSrcAddr = ++ (s8 *) ((volatile int*) MCD_taskTable[channel].contextSaveSpace)[SRCPTR + CSAVE_OFFSET]; ++ progRep->lastDestAddr = ++ (s8 *) ((volatile int*) MCD_taskTable[channel].contextSaveSpace)[DESTPTR + CSAVE_OFFSET]; ++ progRep->dmaSize = ((volatile int*) MCD_taskTable[channel].contextSaveSpace)[DCOUNT + CSAVE_OFFSET]; ++ progRep->currBufDesc = ++ (MCD_bufDesc*) ((volatile int*) MCD_taskTable[channel].contextSaveSpace)[CURRBD + CSAVE_OFFSET]; ++ ++ /* See if they match: */ ++ if ( prevRep.lastSrcAddr != progRep->lastSrcAddr ++ || prevRep.lastDestAddr != progRep->lastDestAddr ++ || prevRep.dmaSize != progRep->dmaSize ++ || prevRep.currBufDesc != progRep->currBufDesc) ++ { ++ /* If they don't match, remember previous values and try again:*/ ++ prevRep.lastSrcAddr = progRep->lastSrcAddr; ++ prevRep.lastDestAddr = progRep->lastDestAddr; ++ prevRep.dmaSize = progRep->dmaSize; ++ prevRep.currBufDesc = progRep->currBufDesc; ++ again = MCD_TRUE; ++ } ++ else ++ again = MCD_FALSE; ++ } while (again == MCD_TRUE); ++ ++ ++ /* Update dmaSize and lastDestAddr */ ++ switch(MCD_remVariants.remDestRsdIncr[channel]) ++ { ++ case MINUS1: ++ subModVal = ((int)progRep->lastDestAddr) ++ & ((MCD_remVariants.remXferSize[channel]) - 1); ++ addModVal = ((int)progRep->currBufDesc->destAddr) ++ & ((MCD_remVariants.remXferSize[channel]) - 1); ++ LWAlignedInitDestAddr = (progRep->currBufDesc->destAddr) - addModVal; ++ LWAlignedCurrDestAddr = (progRep->lastDestAddr) - subModVal; ++ destDiffBytes = LWAlignedInitDestAddr - LWAlignedCurrDestAddr; ++ bytesNotXfered = (destDiffBytes/MCD_remVariants.remDestIncr[channel]) * ++ ( MCD_remVariants.remDestIncr[channel] ++ + MCD_remVariants.remXferSize[channel]); ++ progRep->dmaSize = destDiffBytes - bytesNotXfered + addModVal - subModVal; ++ break; ++ case ZERO: ++ progRep->lastDestAddr = progRep->currBufDesc->destAddr; ++ break; ++ case PLUS1: ++ /* This value has to be subtracted from the final calculated dmaSize. */ ++ subModVal = ((int)progRep->currBufDesc->destAddr) ++ & ((MCD_remVariants.remXferSize[channel]) - 1); ++ /* These bytes are already in lastDestAddr. */ ++ addModVal = ((int)progRep->lastDestAddr) ++ & ((MCD_remVariants.remXferSize[channel]) - 1); ++ LWAlignedInitDestAddr = (progRep->currBufDesc->destAddr) - subModVal; ++ LWAlignedCurrDestAddr = (progRep->lastDestAddr) - addModVal; ++ destDiffBytes = (progRep->lastDestAddr - LWAlignedInitDestAddr); ++ numIterations = ( LWAlignedCurrDestAddr - LWAlignedInitDestAddr)/MCD_remVariants.remDestIncr[channel]; ++ bytesNotXfered = numIterations * ++ (MCD_remVariants.remDestIncr[channel] ++ - MCD_remVariants.remXferSize[channel]); ++ progRep->dmaSize = destDiffBytes - bytesNotXfered - subModVal; ++ break; ++ default: ++ break; ++ } ++ ++ /* This covers M1,P1,Z for source */ ++ switch(MCD_remVariants.remSrcRsdIncr[channel]) ++ { ++ case MINUS1: ++ progRep->lastSrcAddr = ++ progRep->currBufDesc->srcAddr + ++ ( MCD_remVariants.remSrcIncr[channel] * ++ (progRep->dmaSize/MCD_remVariants.remXferSize[channel])); ++ break; ++ case ZERO: ++ progRep->lastSrcAddr = progRep->currBufDesc->srcAddr; ++ break; ++ case PLUS1: ++ progRep->lastSrcAddr = ++ progRep->currBufDesc->srcAddr + ++ ( MCD_remVariants.remSrcIncr[channel] * ++ (progRep->dmaSize/MCD_remVariants.remXferSize[channel])); ++ break; ++ default: ++ break; ++ } ++ ++ return(MCD_OK); ++} ++/******************* End of MCD_XferProgrQuery() ********************/ ++ ++/********************************************************************/ ++/* MCD_resmActions() does the majority of the actions of a DMA resume. ++ * It is called from MCD_killDma() and MCD_resumeDma(). It has to be ++ * a separate function because the kill function has to negate the task ++ * enable before resuming it, but the resume function has to do nothing ++ * if there is no DMA on that channel (i.e., if the enable bit is 0). ++ */ ++static void MCD_resmActions (int channel) ++{ ++ MCD_dmaBar->debugControl = DBG_CTL_DISABLE; ++ MCD_dmaBar->debugStatus = MCD_dmaBar->debugStatus; ++ ++ /* Determine which initiators are asserted */ ++ MCD_dmaBar->ptdDebug = PTD_DBG_TSK_VLD_INIT; ++ ++ if((MCD_dmaBar->ptdDebug >> channel ) & 0x1) ++ MCD_chStatus[channel] = MCD_RUNNING; ++ else ++ MCD_chStatus[channel] = MCD_IDLE; ++} ++/********************* End of MCD_resmActions() *********************/ ++ ++/********************************************************************/ ++/* Function: MCD_killDma ++ * Purpose: Halt the DMA on the requested channel, without any ++ * intention of resuming the DMA. ++ * Arguments: channel - requested channel ++ * Returns: MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK ++ * ++ * Notes: ++ * A DMA may be killed from any state, including paused state, and it ++ * always goes to the MCD_HALTED state even if it is killed while in ++ * the MCD_NO_DMA or MCD_IDLE states. ++ */ ++int MCD_killDma (int channel) ++{ ++ if((channel < 0) || (channel >= NCHANNELS)) ++ return(MCD_CHANNEL_INVALID); ++ ++ MCD_dmaBar->taskControl[channel] = 0x0; ++ ++ /* Clean up after a paused task */ ++ if (MCD_chStatus[channel] == MCD_PAUSED) ++ { ++ MCD_dmaBar->debugControl = DBG_CTL_DISABLE; ++ MCD_dmaBar->debugStatus = MCD_dmaBar->debugStatus; ++ } ++ ++ MCD_chStatus[channel] = MCD_HALTED; ++ ++ return(MCD_OK); ++} ++/************************ End of MCD_killDma() **********************/ ++ ++/********************************************************************/ ++/* Function: MCD_continDma ++ * Purpose: Continue a DMA which as stopped due to encountering an ++ * unready buffer descriptor. ++ * Arguments: channel - channel to continue the DMA on ++ * Returns: MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK ++ * ++ * Notes: ++ * This routine does not check to see if there is a task which can ++ * be continued. Also this routine should not be used with single DMAs. ++ */ ++int MCD_continDma (int channel) ++{ ++ if((channel < 0) || (channel >= NCHANNELS)) ++ return(MCD_CHANNEL_INVALID); ++ ++ MCD_dmaBar->taskControl[channel] |= TASK_CTL_EN; ++ MCD_chStatus[channel] = MCD_RUNNING; ++ ++ return(MCD_OK); ++} ++/********************** End of MCD_continDma() **********************/ ++ ++/********************************************************************* ++ * MCD_pauseDma() and MCD_resumeDma() below use the DMA's debug unit ++ * to freeze a task and resume it. We freeze a task by breakpointing ++ * on the stated task. That is, not any specific place in the task, ++ * but any time that task executes. In particular, when that task ++ * executes, we want to freeze that task and only that task. ++ * ++ * The bits of the debug control register influence interrupts vs. ++ * breakpoints as follows: ++ * - Bits 14 and 0 enable or disable debug functions. If enabled, you ++ * will get the interrupt but you may or may not get a breakpoint. ++ * - Bits 2 and 1 decide whether you also get a breakpoint in addition ++ * to an interrupt. ++ * ++ * The debug unit can do these actions in response to either internally ++ * detected breakpoint conditions from the comparators, or in response ++ * to the external breakpoint pin, or both. ++ * - Bits 14 and 1 perform the above-described functions for ++ * internally-generated conditions, i.e., the debug comparators. ++ * - Bits 0 and 2 perform the above-described functions for external ++ * conditions, i.e., the breakpoint external pin. ++ * ++ * Note that, although you "always" get the interrupt when you turn ++ * the debug functions, the interrupt can nevertheless, if desired, be ++ * masked by the corresponding bit in the PTD's IMR. Note also that ++ * this means that bits 14 and 0 must enable debug functions before ++ * bits 1 and 2, respectively, have any effect. ++ * ++ * NOTE: It's extremely important to not pause more than one DMA channel ++ * at a time. ++ ********************************************************************/ ++ ++/********************************************************************/ ++/* Function: MCD_pauseDma ++ * Purpose: Pauses the DMA on a given channel (if any DMA is running ++ * on that channel). ++ * Arguments: channel ++ * Returns: MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK ++ */ ++int MCD_pauseDma (int channel) ++{ ++ if((channel < 0) || (channel >= NCHANNELS)) ++ return(MCD_CHANNEL_INVALID); ++ ++ if (MCD_dmaBar->taskControl[channel] & TASK_CTL_EN) ++ { ++ MCD_dmaBar->debugComp1 = channel; ++ MCD_dmaBar->debugControl = DBG_CTL_ENABLE | (1 << (channel + 16)); ++ MCD_chStatus[channel] = MCD_PAUSED; ++ } ++ return(MCD_OK); ++} ++/************************* End of MCD_pauseDma() ********************/ ++ ++/********************************************************************/ ++/* Function: MCD_resumeDma ++ * Purpose: Resumes the DMA on a given channel (if any DMA is ++ * running on that channel). ++ * Arguments: channel - channel on which to resume DMA ++ * Returns: MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK ++ */ ++int MCD_resumeDma (int channel) ++{ ++ if((channel < 0) || (channel >= NCHANNELS)) ++ return(MCD_CHANNEL_INVALID); ++ ++ if (MCD_dmaBar->taskControl[channel] & TASK_CTL_EN) ++ MCD_resmActions (channel); ++ ++ return(MCD_OK); ++} ++/************************ End of MCD_resumeDma() ********************/ ++ ++/********************************************************************/ ++/* Function: MCD_csumQuery ++ * Purpose: Provide the checksum after performing a non-chained DMA ++ * Arguments: channel - channel to report on ++ * csum - pointer to where to write the checksum/CRC ++ * Returns: MCD_ERROR if the channel is invalid, else MCD_OK ++ * ++ * Notes: ++ * ++ */ ++int MCD_csumQuery (int channel, u32 *csum) ++{ ++#ifdef MCD_INCLUDE_EU ++ if((channel < 0) || (channel >= NCHANNELS)) ++ return(MCD_CHANNEL_INVALID); ++ ++ *csum = MCD_relocBuffDesc[channel].csumResult; ++ return(MCD_OK); ++#else ++ return(MCD_ERROR); ++#endif ++} ++/*********************** End of MCD_resumeDma() *********************/ ++ ++/********************************************************************/ ++/* Function: MCD_getCodeSize ++ * Purpose: Provide the size requirements of the microcoded tasks ++ * Returns: Size in bytes ++ */ ++int MCD_getCodeSize(void) ++{ ++#ifdef MCD_INCLUDE_EU ++ return(0x2b64); ++#else ++ return(0x1744); ++#endif ++} ++/********************** End of MCD_getCodeSize() ********************/ ++ ++/********************************************************************/ ++/* Function: MCD_getVersion ++ * Purpose: Provide the version string and number ++ * Arguments: longVersion - user supplied pointer to a pointer to a char ++ * which points to the version string ++ * Returns: Version number and version string (by reference) ++ */ ++char MCD_versionString[] = "Multi-channel DMA API v1.0"; ++#define MCD_REV_MAJOR 0x01 ++#define MCD_REV_MINOR 0x00 ++ ++int MCD_getVersion(char **longVersion) ++{ ++ *longVersion = MCD_versionString; ++ return((MCD_REV_MAJOR << 8) | MCD_REV_MINOR); ++} ++/********************** End of MCD_getVersion() *********************/ ++ ++/********************************************************************/ ++/* Private version of memcpy() ++ * Note that everything this is used for is longword-aligned. ++ */ ++static void MCD_memcpy (int *dest, int *src, u32 size) ++{ ++ u32 i; ++ ++ for (i = 0; i < size; i += sizeof(int), dest++, src++) ++ *dest = *src; ++} ++/********************************************************************/ +--- /dev/null ++++ b/drivers/dma/MCD_dma.h +@@ -0,0 +1,378 @@ ++/* ++ * drivers/dma/MCD_dma.h ++ * ++ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. ++ * Kurt Mahan <kmahan@freescale.com> ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++#ifndef _MCD_API_H ++#define _MCD_API_H ++ ++/* ++ * Turn Execution Unit tasks ON (#define) or OFF (#undef) ++ */ ++#undef MCD_INCLUDE_EU ++ ++/* ++ * Number of DMA channels ++ */ ++#define NCHANNELS 16 ++ ++/* ++ * Total number of variants ++ */ ++#ifdef MCD_INCLUDE_EU ++#define NUMOFVARIANTS 6 ++#else ++#define NUMOFVARIANTS 4 ++#endif ++ ++/* ++ * Define sizes of the various tables ++ */ ++#define TASK_TABLE_SIZE (NCHANNELS*32) ++#define VAR_TAB_SIZE (128) ++#define CONTEXT_SAVE_SIZE (128) ++#define FUNCDESC_TAB_SIZE (256) ++ ++#ifdef MCD_INCLUDE_EU ++#define FUNCDESC_TAB_NUM 16 ++#else ++#define FUNCDESC_TAB_NUM 1 ++#endif ++ ++ ++#ifndef DEFINESONLY ++ ++/* ++ * Portability typedefs ++ */ ++typedef int s32; ++typedef unsigned int u32; ++typedef short s16; ++typedef unsigned short u16; ++typedef char s8; ++typedef unsigned char u8; ++ ++/* ++ * These structures represent the internal registers of the ++ * multi-channel DMA ++ */ ++struct dmaRegs_s { ++ u32 taskbar; /* task table base address register */ ++ u32 currPtr; ++ u32 endPtr; ++ u32 varTablePtr; ++ u16 dma_rsvd0; ++ u16 ptdControl; /* ptd control */ ++ u32 intPending; /* interrupt pending register */ ++ u32 intMask; /* interrupt mask register */ ++ u16 taskControl[16]; /* task control registers */ ++ u8 priority[32]; /* priority registers */ ++ u32 initiatorMux; /* initiator mux control */ ++ u32 taskSize0; /* task size control register 0. */ ++ u32 taskSize1; /* task size control register 1. */ ++ u32 dma_rsvd1; /* reserved */ ++ u32 dma_rsvd2; /* reserved */ ++ u32 debugComp1; /* debug comparator 1 */ ++ u32 debugComp2; /* debug comparator 2 */ ++ u32 debugControl; /* debug control */ ++ u32 debugStatus; /* debug status */ ++ u32 ptdDebug; /* priority task decode debug */ ++ u32 dma_rsvd3[31]; /* reserved */ ++}; ++typedef volatile struct dmaRegs_s dmaRegs; ++ ++#endif ++ ++/* ++ * PTD contrl reg bits ++ */ ++#define PTD_CTL_TSK_PRI 0x8000 ++#define PTD_CTL_COMM_PREFETCH 0x0001 ++ ++/* ++ * Task Control reg bits and field masks ++ */ ++#define TASK_CTL_EN 0x8000 ++#define TASK_CTL_VALID 0x4000 ++#define TASK_CTL_ALWAYS 0x2000 ++#define TASK_CTL_INIT_MASK 0x1f00 ++#define TASK_CTL_ASTRT 0x0080 ++#define TASK_CTL_HIPRITSKEN 0x0040 ++#define TASK_CTL_HLDINITNUM 0x0020 ++#define TASK_CTL_ASTSKNUM_MASK 0x000f ++ ++/* ++ * Priority reg bits and field masks ++ */ ++#define PRIORITY_HLD 0x80 ++#define PRIORITY_PRI_MASK 0x07 ++ ++/* ++ * Debug Control reg bits and field masks ++ */ ++#define DBG_CTL_BLOCK_TASKS_MASK 0xffff0000 ++#define DBG_CTL_AUTO_ARM 0x00008000 ++#define DBG_CTL_BREAK 0x00004000 ++#define DBG_CTL_COMP1_TYP_MASK 0x00003800 ++#define DBG_CTL_COMP2_TYP_MASK 0x00000070 ++#define DBG_CTL_EXT_BREAK 0x00000004 ++#define DBG_CTL_INT_BREAK 0x00000002 ++ ++/* ++ * PTD Debug reg selector addresses ++ * This reg must be written with a value to show the contents of ++ * one of the desired internal register. ++ */ ++#define PTD_DBG_REQ 0x00 /* shows the state of 31 initiators */ ++#define PTD_DBG_TSK_VLD_INIT 0x01 /* shows which 16 tasks are valid and ++ have initiators asserted */ ++ ++ ++/* ++ * General return values ++ */ ++#define MCD_OK 0 ++#define MCD_ERROR -1 ++#define MCD_TABLE_UNALIGNED -2 ++#define MCD_CHANNEL_INVALID -3 ++ ++/* ++ * MCD_initDma input flags ++ */ ++#define MCD_RELOC_TASKS 0x00000001 ++#define MCD_NO_RELOC_TASKS 0x00000000 ++#define MCD_COMM_PREFETCH_EN 0x00000002 /* Commbus Prefetching - MCF547x/548x ONLY */ ++ ++/* ++ * MCD_dmaStatus Status Values for each channel ++ */ ++#define MCD_NO_DMA 1 /* No DMA has been requested since reset */ ++#define MCD_IDLE 2 /* DMA active, but the initiator is currently inactive */ ++#define MCD_RUNNING 3 /* DMA active, and the initiator is currently active */ ++#define MCD_PAUSED 4 /* DMA active but it is currently paused */ ++#define MCD_HALTED 5 /* the most recent DMA has been killed with MCD_killTask() */ ++#define MCD_DONE 6 /* the most recent DMA has completed. */ ++ ++ ++/* ++ * MCD_startDma parameter defines ++ */ ++ ++/* ++ * Constants for the funcDesc parameter ++ */ ++/* Byte swapping: */ ++#define MCD_NO_BYTE_SWAP 0x00045670 /* to disable byte swapping. */ ++#define MCD_BYTE_REVERSE 0x00076540 /* to reverse the bytes of each u32 of the DMAed data. */ ++#define MCD_U16_REVERSE 0x00067450 /* to reverse the 16-bit halves of ++ each 32-bit data value being DMAed.*/ ++#define MCD_U16_BYTE_REVERSE 0x00054760 /* to reverse the byte halves of each ++ 16-bit half of each 32-bit data value DMAed */ ++#define MCD_NO_BIT_REV 0x00000000 /* do not reverse the bits of each byte DMAed. */ ++#define MCD_BIT_REV 0x00088880 /* reverse the bits of each byte DMAed */ ++/* CRCing: */ ++#define MCD_CRC16 0xc0100000 /* to perform CRC-16 on DMAed data. */ ++#define MCD_CRCCCITT 0xc0200000 /* to perform CRC-CCITT on DMAed data. */ ++#define MCD_CRC32 0xc0300000 /* to perform CRC-32 on DMAed data. */ ++#define MCD_CSUMINET 0xc0400000 /* to perform internet checksums on DMAed data.*/ ++#define MCD_NO_CSUM 0xa0000000 /* to perform no checksumming. */ ++ ++#define MCD_FUNC_NOEU1 (MCD_NO_BYTE_SWAP | MCD_NO_BIT_REV | MCD_NO_CSUM) ++#define MCD_FUNC_NOEU2 (MCD_NO_BYTE_SWAP | MCD_NO_CSUM) ++ ++/* ++ * Constants for the flags parameter ++ */ ++#define MCD_TT_FLAGS_RL 0x00000001 /* Read line */ ++#define MCD_TT_FLAGS_CW 0x00000002 /* Combine Writes */ ++#define MCD_TT_FLAGS_SP 0x00000004 /* Speculative prefetch(XLB) MCF547x/548x ONLY */ ++#define MCD_TT_FLAGS_PI 0x00000040 /* Precise Increment */ ++#define MCD_TT_FLAGS_MASK 0x000000ff ++#define MCD_TT_FLAGS_DEF (MCD_TT_FLAGS_RL | MCD_TT_FLAGS_CW) ++ ++#define MCD_SINGLE_DMA 0x00000100 /* Unchained DMA */ ++#define MCD_CHAIN_DMA /* TBD */ ++#define MCD_EU_DMA /* TBD */ ++#define MCD_FECTX_DMA 0x00001000 /* FEC TX ring DMA */ ++#define MCD_FECRX_DMA 0x00002000 /* FEC RX ring DMA */ ++ ++ ++/* these flags are valid for MCD_startDma and the chained buffer descriptors */ ++#define MCD_BUF_READY 0x80000000 /* indicates that this buffer is now under the DMA's control */ ++#define MCD_WRAP 0x20000000 /* to tell the FEC Dmas to wrap to the first BD */ ++#define MCD_INTERRUPT 0x10000000 /* to generate an interrupt after completion of the DMA. */ ++#define MCD_END_FRAME 0x08000000 /* tell the DMA to end the frame when transferring ++ last byte of data in buffer */ ++#define MCD_CRC_RESTART 0x40000000 /* to empty out the accumulated checksum ++ prior to performing the DMA. */ ++ ++/* Defines for the FEC buffer descriptor control/status word*/ ++#define MCD_FEC_BUF_READY 0x8000 ++#define MCD_FEC_WRAP 0x2000 ++#define MCD_FEC_INTERRUPT 0x1000 ++#define MCD_FEC_END_FRAME 0x0800 ++ ++ ++/* ++ * Defines for general intuitiveness ++ */ ++ ++#define MCD_TRUE 1 ++#define MCD_FALSE 0 ++ ++/* ++ * Three different cases for destination and source. ++ */ ++#define MINUS1 -1 ++#define ZERO 0 ++#define PLUS1 1 ++ ++#ifndef DEFINESONLY ++ ++/* Task Table Entry struct*/ ++typedef struct { ++ u32 TDTstart; /* task descriptor table start */ ++ u32 TDTend; /* task descriptor table end */ ++ u32 varTab; /* variable table start */ ++ u32 FDTandFlags; /* function descriptor table start and flags */ ++ volatile u32 descAddrAndStatus; ++ volatile u32 modifiedVarTab; ++ u32 contextSaveSpace; /* context save space start */ ++ u32 literalBases; ++} TaskTableEntry; ++ ++ ++/* Chained buffer descriptor */ ++typedef volatile struct MCD_bufDesc_struct MCD_bufDesc; ++struct MCD_bufDesc_struct { ++ u32 flags; /* flags describing the DMA */ ++ u32 csumResult; /* checksum from checksumming performed since last checksum reset */ ++ s8 *srcAddr; /* the address to move data from */ ++ s8 *destAddr; /* the address to move data to */ ++ s8 *lastDestAddr; /* the last address written to */ ++ u32 dmaSize; /* the number of bytes to transfer independent of the transfer size */ ++ MCD_bufDesc *next; /* next buffer descriptor in chain */ ++ u32 info; /* private information about this descriptor; DMA does not affect it */ ++}; ++ ++/* Progress Query struct */ ++typedef volatile struct MCD_XferProg_struct { ++ s8 *lastSrcAddr; /* the most-recent or last, post-increment source address */ ++ s8 *lastDestAddr; /* the most-recent or last, post-increment destination address */ ++ u32 dmaSize; /* the amount of data transferred for the current buffer */ ++ MCD_bufDesc *currBufDesc;/* pointer to the current buffer descriptor being DMAed */ ++} MCD_XferProg; ++ ++ ++/* FEC buffer descriptor */ ++typedef volatile struct MCD_bufDescFec_struct { ++ u16 statCtrl; ++ u16 length; ++ u32 dataPointer; ++} MCD_bufDescFec; ++ ++ ++/*************************************************************************/ ++/* ++ * API function Prototypes - see MCD_dmaApi.c for further notes ++ */ ++ ++/* ++ * MCD_startDma starts a particular kind of DMA . ++ */ ++int MCD_startDma ( ++ int channel, /* the channel on which to run the DMA */ ++ s8 *srcAddr, /* the address to move data from, or buffer-descriptor address */ ++ s16 srcIncr, /* the amount to increment the source address per transfer */ ++ s8 *destAddr, /* the address to move data to */ ++ s16 destIncr, /* the amount to increment the destination address per transfer */ ++ u32 dmaSize, /* the number of bytes to transfer independent of the transfer size */ ++ u32 xferSize, /* the number bytes in of each data movement (1, 2, or 4) */ ++ u32 initiator, /* what device initiates the DMA */ ++ int priority, /* priority of the DMA */ ++ u32 flags, /* flags describing the DMA */ ++ u32 funcDesc /* a description of byte swapping, bit swapping, and CRC actions */ ++); ++ ++/* ++ * MCD_initDma() initializes the DMA API by setting up a pointer to the DMA ++ * registers, relocating and creating the appropriate task structures, and ++ * setting up some global settings ++ */ ++int MCD_initDma (dmaRegs *sDmaBarAddr, void *taskTableDest, u32 flags); ++ ++/* ++ * MCD_dmaStatus() returns the status of the DMA on the requested channel. ++ */ ++int MCD_dmaStatus (int channel); ++ ++/* ++ * MCD_XferProgrQuery() returns progress of DMA on requested channel ++ */ ++int MCD_XferProgrQuery (int channel, MCD_XferProg *progRep); ++ ++/* ++ * MCD_killDma() halts the DMA on the requested channel, without any ++ * intention of resuming the DMA. ++ */ ++int MCD_killDma (int channel); ++ ++/* ++ * MCD_continDma() continues a DMA which as stopped due to encountering an ++ * unready buffer descriptor. ++ */ ++int MCD_continDma (int channel); ++ ++/* ++ * MCD_pauseDma() pauses the DMA on the given channel ( if any DMA is ++ * running on that channel). ++ */ ++int MCD_pauseDma (int channel); ++ ++/* ++ * MCD_resumeDma() resumes the DMA on a given channel (if any DMA is ++ * running on that channel). ++ */ ++int MCD_resumeDma (int channel); ++ ++/* ++ * MCD_csumQuery provides the checksum/CRC after performing a non-chained DMA ++ */ ++int MCD_csumQuery (int channel, u32 *csum); ++ ++/* ++ * MCD_getCodeSize provides the packed size required by the microcoded task ++ * and structures. ++ */ ++int MCD_getCodeSize(void); ++ ++/* ++ * MCD_getVersion provides a pointer to a version string and returns a ++ * version number. ++ */ ++int MCD_getVersion(char **longVersion); ++ ++/* macro for setting a location in the variable table */ ++#define MCD_SET_VAR(taskTab,idx,value) ((u32 *)(taskTab)->varTab)[idx] = value ++ /* Note that MCD_SET_VAR() is invoked many times in firing up a DMA function, ++ so I'm avoiding surrounding it with "do {} while(0)" */ ++ ++#endif /* DEFINESONLY */ ++ ++#endif /* _MCD_API_H */ +--- /dev/null ++++ b/drivers/dma/MCD_progCheck.h +@@ -0,0 +1,28 @@ ++/* ++ * drivers/dma/MCD_progCheck.h ++ * ++ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. ++ * Kurt Mahan <kmahan@freescale.com> ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++/* This file is autogenerated. Do not change */ ++ ++#define CURRBD 4 ++#define DCOUNT 6 ++#define DESTPTR 5 ++#define SRCPTR 7 +--- /dev/null ++++ b/drivers/dma/MCD_tasks.c +@@ -0,0 +1,2465 @@ ++/* ++ * drivers/dma/MCD_tasks.c ++ * ++ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. ++ * Kurt Mahan <kmahan@freescale.com> ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include "MCD_dma.h" ++ ++u32 MCD_varTab0[]; ++u32 MCD_varTab1[]; ++u32 MCD_varTab2[]; ++u32 MCD_varTab3[]; ++u32 MCD_varTab4[]; ++u32 MCD_varTab5[]; ++u32 MCD_varTab6[]; ++u32 MCD_varTab7[]; ++u32 MCD_varTab8[]; ++u32 MCD_varTab9[]; ++u32 MCD_varTab10[]; ++u32 MCD_varTab11[]; ++u32 MCD_varTab12[]; ++u32 MCD_varTab13[]; ++u32 MCD_varTab14[]; ++u32 MCD_varTab15[]; ++ ++u32 MCD_funcDescTab0[]; ++#ifdef MCD_INCLUDE_EU ++u32 MCD_funcDescTab1[]; ++u32 MCD_funcDescTab2[]; ++u32 MCD_funcDescTab3[]; ++u32 MCD_funcDescTab4[]; ++u32 MCD_funcDescTab5[]; ++u32 MCD_funcDescTab6[]; ++u32 MCD_funcDescTab7[]; ++u32 MCD_funcDescTab8[]; ++u32 MCD_funcDescTab9[]; ++u32 MCD_funcDescTab10[]; ++u32 MCD_funcDescTab11[]; ++u32 MCD_funcDescTab12[]; ++u32 MCD_funcDescTab13[]; ++u32 MCD_funcDescTab14[]; ++u32 MCD_funcDescTab15[]; ++#endif ++ ++u32 MCD_contextSave0[]; ++u32 MCD_contextSave1[]; ++u32 MCD_contextSave2[]; ++u32 MCD_contextSave3[]; ++u32 MCD_contextSave4[]; ++u32 MCD_contextSave5[]; ++u32 MCD_contextSave6[]; ++u32 MCD_contextSave7[]; ++u32 MCD_contextSave8[]; ++u32 MCD_contextSave9[]; ++u32 MCD_contextSave10[]; ++u32 MCD_contextSave11[]; ++u32 MCD_contextSave12[]; ++u32 MCD_contextSave13[]; ++u32 MCD_contextSave14[]; ++u32 MCD_contextSave15[]; ++ ++u32 MCD_realTaskTableSrc[] = ++{ ++ 0x00000000, ++ 0x00000000, ++ (u32)MCD_varTab0, /* Task 0 Variable Table */ ++ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */ ++ 0x00000000, ++ 0x00000000, ++ (u32)MCD_contextSave0, /* Task 0 context save space */ ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ (u32)MCD_varTab1, /* Task 1 Variable Table */ ++#ifdef MCD_INCLUDE_EU ++ (u32)MCD_funcDescTab1, /* Task 1 Function Descriptor Table & Flags */ ++#else ++ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */ ++#endif ++ 0x00000000, ++ 0x00000000, ++ (u32)MCD_contextSave1, /* Task 1 context save space */ ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ (u32)MCD_varTab2, /* Task 2 Variable Table */ ++#ifdef MCD_INCLUDE_EU ++ (u32)MCD_funcDescTab2, /* Task 2 Function Descriptor Table & Flags */ ++#else ++ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */ ++#endif ++ 0x00000000, ++ 0x00000000, ++ (u32)MCD_contextSave2, /* Task 2 context save space */ ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ (u32)MCD_varTab3, /* Task 3 Variable Table */ ++#ifdef MCD_INCLUDE_EU ++ (u32)MCD_funcDescTab3, /* Task 3 Function Descriptor Table & Flags */ ++#else ++ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */ ++#endif ++ 0x00000000, ++ 0x00000000, ++ (u32)MCD_contextSave3, /* Task 3 context save space */ ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ (u32)MCD_varTab4, /* Task 4 Variable Table */ ++#ifdef MCD_INCLUDE_EU ++ (u32)MCD_funcDescTab4, /* Task 4 Function Descriptor Table & Flags */ ++#else ++ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */ ++#endif ++ 0x00000000, ++ 0x00000000, ++ (u32)MCD_contextSave4, /* Task 4 context save space */ ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ (u32)MCD_varTab5, /* Task 5 Variable Table */ ++#ifdef MCD_INCLUDE_EU ++ (u32)MCD_funcDescTab5, /* Task 5 Function Descriptor Table & Flags */ ++#else ++ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */ ++#endif ++ 0x00000000, ++ 0x00000000, ++ (u32)MCD_contextSave5, /* Task 5 context save space */ ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ (u32)MCD_varTab6, /* Task 6 Variable Table */ ++#ifdef MCD_INCLUDE_EU ++ (u32)MCD_funcDescTab6, /* Task 6 Function Descriptor Table & Flags */ ++#else ++ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */ ++#endif ++ 0x00000000, ++ 0x00000000, ++ (u32)MCD_contextSave6, /* Task 6 context save space */ ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ (u32)MCD_varTab7, /* Task 7 Variable Table */ ++#ifdef MCD_INCLUDE_EU ++ (u32)MCD_funcDescTab7, /* Task 7 Function Descriptor Table & Flags */ ++#else ++ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */ ++#endif ++ 0x00000000, ++ 0x00000000, ++ (u32)MCD_contextSave7, /* Task 7 context save space */ ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ (u32)MCD_varTab8, /* Task 8 Variable Table */ ++#ifdef MCD_INCLUDE_EU ++ (u32)MCD_funcDescTab8, /* Task 8 Function Descriptor Table & Flags */ ++#else ++ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */ ++#endif ++ 0x00000000, ++ 0x00000000, ++ (u32)MCD_contextSave8, /* Task 8 context save space */ ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ (u32)MCD_varTab9, /* Task 9 Variable Table */ ++#ifdef MCD_INCLUDE_EU ++ (u32)MCD_funcDescTab9, /* Task 9 Function Descriptor Table & Flags */ ++#else ++ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */ ++#endif ++ 0x00000000, ++ 0x00000000, ++ (u32)MCD_contextSave9, /* Task 9 context save space */ ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ (u32)MCD_varTab10, /* Task 10 Variable Table */ ++#ifdef MCD_INCLUDE_EU ++ (u32)MCD_funcDescTab10, /* Task 10 Function Descriptor Table & Flags */ ++#else ++ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */ ++#endif ++ 0x00000000, ++ 0x00000000, ++ (u32)MCD_contextSave10, /* Task 10 context save space */ ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ (u32)MCD_varTab11, /* Task 11 Variable Table */ ++#ifdef MCD_INCLUDE_EU ++ (u32)MCD_funcDescTab11, /* Task 11 Function Descriptor Table & Flags */ ++#else ++ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */ ++#endif ++ 0x00000000, ++ 0x00000000, ++ (u32)MCD_contextSave11, /* Task 11 context save space */ ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ (u32)MCD_varTab12, /* Task 12 Variable Table */ ++#ifdef MCD_INCLUDE_EU ++ (u32)MCD_funcDescTab12, /* Task 12 Function Descriptor Table & Flags */ ++#else ++ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */ ++#endif ++ 0x00000000, ++ 0x00000000, ++ (u32)MCD_contextSave12, /* Task 12 context save space */ ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ (u32)MCD_varTab13, /* Task 13 Variable Table */ ++#ifdef MCD_INCLUDE_EU ++ (u32)MCD_funcDescTab13, /* Task 13 Function Descriptor Table & Flags */ ++#else ++ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */ ++#endif ++ 0x00000000, ++ 0x00000000, ++ (u32)MCD_contextSave13, /* Task 13 context save space */ ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ (u32)MCD_varTab14, /* Task 14 Variable Table */ ++#ifdef MCD_INCLUDE_EU ++ (u32)MCD_funcDescTab14, /* Task 14 Function Descriptor Table & Flags */ ++#else ++ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */ ++#endif ++ 0x00000000, ++ 0x00000000, ++ (u32)MCD_contextSave14, /* Task 14 context save space */ ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ (u32)MCD_varTab15, /* Task 15 Variable Table */ ++#ifdef MCD_INCLUDE_EU ++ (u32)MCD_funcDescTab15, /* Task 15 Function Descriptor Table & Flags */ ++#else ++ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */ ++#endif ++ 0x00000000, ++ 0x00000000, ++ (u32)MCD_contextSave15, /* Task 15 context save space */ ++ 0x00000000, ++}; ++ ++ ++u32 MCD_varTab0[] = ++{ /* Task 0 Variable Table */ ++ 0x00000000, /* var[0] */ ++ 0x00000000, /* var[1] */ ++ 0x00000000, /* var[2] */ ++ 0x00000000, /* var[3] */ ++ 0x00000000, /* var[4] */ ++ 0x00000000, /* var[5] */ ++ 0x00000000, /* var[6] */ ++ 0x00000000, /* var[7] */ ++ 0x00000000, /* var[8] */ ++ 0x00000000, /* var[9] */ ++ 0x00000000, /* var[10] */ ++ 0x00000000, /* var[11] */ ++ 0x00000000, /* var[12] */ ++ 0x00000000, /* var[13] */ ++ 0x00000000, /* var[14] */ ++ 0x00000000, /* var[15] */ ++ 0x00000000, /* var[16] */ ++ 0x00000000, /* var[17] */ ++ 0x00000000, /* var[18] */ ++ 0x00000000, /* var[19] */ ++ 0x00000000, /* var[20] */ ++ 0x00000000, /* var[21] */ ++ 0x00000000, /* var[22] */ ++ 0x00000000, /* var[23] */ ++ 0xe0000000, /* inc[0] */ ++ 0x20000000, /* inc[1] */ ++ 0x2000ffff, /* inc[2] */ ++ 0x00000000, /* inc[3] */ ++ 0x00000000, /* inc[4] */ ++ 0x00000000, /* inc[5] */ ++ 0x00000000, /* inc[6] */ ++ 0x00000000, /* inc[7] */ ++}; ++ ++ ++u32 MCD_varTab1[] = ++{ /* Task 1 Variable Table */ ++ 0x00000000, /* var[0] */ ++ 0x00000000, /* var[1] */ ++ 0x00000000, /* var[2] */ ++ 0x00000000, /* var[3] */ ++ 0x00000000, /* var[4] */ ++ 0x00000000, /* var[5] */ ++ 0x00000000, /* var[6] */ ++ 0x00000000, /* var[7] */ ++ 0x00000000, /* var[8] */ ++ 0x00000000, /* var[9] */ ++ 0x00000000, /* var[10] */ ++ 0x00000000, /* var[11] */ ++ 0x00000000, /* var[12] */ ++ 0x00000000, /* var[13] */ ++ 0x00000000, /* var[14] */ ++ 0x00000000, /* var[15] */ ++ 0x00000000, /* var[16] */ ++ 0x00000000, /* var[17] */ ++ 0x00000000, /* var[18] */ ++ 0x00000000, /* var[19] */ ++ 0x00000000, /* var[20] */ ++ 0x00000000, /* var[21] */ ++ 0x00000000, /* var[22] */ ++ 0x00000000, /* var[23] */ ++ 0xe0000000, /* inc[0] */ ++ 0x20000000, /* inc[1] */ ++ 0x2000ffff, /* inc[2] */ ++ 0x00000000, /* inc[3] */ ++ 0x00000000, /* inc[4] */ ++ 0x00000000, /* inc[5] */ ++ 0x00000000, /* inc[6] */ ++ 0x00000000, /* inc[7] */ ++}; ++ ++u32 MCD_varTab2[]= ++{ /* Task 2 Variable Table */ ++ 0x00000000, /* var[0] */ ++ 0x00000000, /* var[1] */ ++ 0x00000000, /* var[2] */ ++ 0x00000000, /* var[3] */ ++ 0x00000000, /* var[4] */ ++ 0x00000000, /* var[5] */ ++ 0x00000000, /* var[6] */ ++ 0x00000000, /* var[7] */ ++ 0x00000000, /* var[8] */ ++ 0x00000000, /* var[9] */ ++ 0x00000000, /* var[10] */ ++ 0x00000000, /* var[11] */ ++ 0x00000000, /* var[12] */ ++ 0x00000000, /* var[13] */ ++ 0x00000000, /* var[14] */ ++ 0x00000000, /* var[15] */ ++ 0x00000000, /* var[16] */ ++ 0x00000000, /* var[17] */ ++ 0x00000000, /* var[18] */ ++ 0x00000000, /* var[19] */ ++ 0x00000000, /* var[20] */ ++ 0x00000000, /* var[21] */ ++ 0x00000000, /* var[22] */ ++ 0x00000000, /* var[23] */ ++ 0xe0000000, /* inc[0] */ ++ 0x20000000, /* inc[1] */ ++ 0x2000ffff, /* inc[2] */ ++ 0x00000000, /* inc[3] */ ++ 0x00000000, /* inc[4] */ ++ 0x00000000, /* inc[5] */ ++ 0x00000000, /* inc[6] */ ++ 0x00000000, /* inc[7] */ ++}; ++ ++u32 MCD_varTab3[]= ++{ /* Task 3 Variable Table */ ++ 0x00000000, /* var[0] */ ++ 0x00000000, /* var[1] */ ++ 0x00000000, /* var[2] */ ++ 0x00000000, /* var[3] */ ++ 0x00000000, /* var[4] */ ++ 0x00000000, /* var[5] */ ++ 0x00000000, /* var[6] */ ++ 0x00000000, /* var[7] */ ++ 0x00000000, /* var[8] */ ++ 0x00000000, /* var[9] */ ++ 0x00000000, /* var[10] */ ++ 0x00000000, /* var[11] */ ++ 0x00000000, /* var[12] */ ++ 0x00000000, /* var[13] */ ++ 0x00000000, /* var[14] */ ++ 0x00000000, /* var[15] */ ++ 0x00000000, /* var[16] */ ++ 0x00000000, /* var[17] */ ++ 0x00000000, /* var[18] */ ++ 0x00000000, /* var[19] */ ++ 0x00000000, /* var[20] */ ++ 0x00000000, /* var[21] */ ++ 0x00000000, /* var[22] */ ++ 0x00000000, /* var[23] */ ++ 0xe0000000, /* inc[0] */ ++ 0x20000000, /* inc[1] */ ++ 0x2000ffff, /* inc[2] */ ++ 0x00000000, /* inc[3] */ ++ 0x00000000, /* inc[4] */ ++ 0x00000000, /* inc[5] */ ++ 0x00000000, /* inc[6] */ ++ 0x00000000, /* inc[7] */ ++}; ++ ++u32 MCD_varTab4[]= ++{ /* Task 4 Variable Table */ ++ 0x00000000, /* var[0] */ ++ 0x00000000, /* var[1] */ ++ 0x00000000, /* var[2] */ ++ 0x00000000, /* var[3] */ ++ 0x00000000, /* var[4] */ ++ 0x00000000, /* var[5] */ ++ 0x00000000, /* var[6] */ ++ 0x00000000, /* var[7] */ ++ 0x00000000, /* var[8] */ ++ 0x00000000, /* var[9] */ ++ 0x00000000, /* var[10] */ ++ 0x00000000, /* var[11] */ ++ 0x00000000, /* var[12] */ ++ 0x00000000, /* var[13] */ ++ 0x00000000, /* var[14] */ ++ 0x00000000, /* var[15] */ ++ 0x00000000, /* var[16] */ ++ 0x00000000, /* var[17] */ ++ 0x00000000, /* var[18] */ ++ 0x00000000, /* var[19] */ ++ 0x00000000, /* var[20] */ ++ 0x00000000, /* var[21] */ ++ 0x00000000, /* var[22] */ ++ 0x00000000, /* var[23] */ ++ 0xe0000000, /* inc[0] */ ++ 0x20000000, /* inc[1] */ ++ 0x2000ffff, /* inc[2] */ ++ 0x00000000, /* inc[3] */ ++ 0x00000000, /* inc[4] */ ++ 0x00000000, /* inc[5] */ ++ 0x00000000, /* inc[6] */ ++ 0x00000000, /* inc[7] */ ++}; ++ ++u32 MCD_varTab5[]= ++{ /* Task 5 Variable Table */ ++ 0x00000000, /* var[0] */ ++ 0x00000000, /* var[1] */ ++ 0x00000000, /* var[2] */ ++ 0x00000000, /* var[3] */ ++ 0x00000000, /* var[4] */ ++ 0x00000000, /* var[5] */ ++ 0x00000000, /* var[6] */ ++ 0x00000000, /* var[7] */ ++ 0x00000000, /* var[8] */ ++ 0x00000000, /* var[9] */ ++ 0x00000000, /* var[10] */ ++ 0x00000000, /* var[11] */ ++ 0x00000000, /* var[12] */ ++ 0x00000000, /* var[13] */ ++ 0x00000000, /* var[14] */ ++ 0x00000000, /* var[15] */ ++ 0x00000000, /* var[16] */ ++ 0x00000000, /* var[17] */ ++ 0x00000000, /* var[18] */ ++ 0x00000000, /* var[19] */ ++ 0x00000000, /* var[20] */ ++ 0x00000000, /* var[21] */ ++ 0x00000000, /* var[22] */ ++ 0x00000000, /* var[23] */ ++ 0xe0000000, /* inc[0] */ ++ 0x20000000, /* inc[1] */ ++ 0x2000ffff, /* inc[2] */ ++ 0x00000000, /* inc[3] */ ++ 0x00000000, /* inc[4] */ ++ 0x00000000, /* inc[5] */ ++ 0x00000000, /* inc[6] */ ++ 0x00000000, /* inc[7] */ ++}; ++ ++u32 MCD_varTab6[]= ++{ /* Task 6 Variable Table */ ++ 0x00000000, /* var[0] */ ++ 0x00000000, /* var[1] */ ++ 0x00000000, /* var[2] */ ++ 0x00000000, /* var[3] */ ++ 0x00000000, /* var[4] */ ++ 0x00000000, /* var[5] */ ++ 0x00000000, /* var[6] */ ++ 0x00000000, /* var[7] */ ++ 0x00000000, /* var[8] */ ++ 0x00000000, /* var[9] */ ++ 0x00000000, /* var[10] */ ++ 0x00000000, /* var[11] */ ++ 0x00000000, /* var[12] */ ++ 0x00000000, /* var[13] */ ++ 0x00000000, /* var[14] */ ++ 0x00000000, /* var[15] */ ++ 0x00000000, /* var[16] */ ++ 0x00000000, /* var[17] */ ++ 0x00000000, /* var[18] */ ++ 0x00000000, /* var[19] */ ++ 0x00000000, /* var[20] */ ++ 0x00000000, /* var[21] */ ++ 0x00000000, /* var[22] */ ++ 0x00000000, /* var[23] */ ++ 0xe0000000, /* inc[0] */ ++ 0x20000000, /* inc[1] */ ++ 0x2000ffff, /* inc[2] */ ++ 0x00000000, /* inc[3] */ ++ 0x00000000, /* inc[4] */ ++ 0x00000000, /* inc[5] */ ++ 0x00000000, /* inc[6] */ ++ 0x00000000, /* inc[7] */ ++}; ++ ++u32 MCD_varTab7[]= ++{ /* Task 7 Variable Table */ ++ 0x00000000, /* var[0] */ ++ 0x00000000, /* var[1] */ ++ 0x00000000, /* var[2] */ ++ 0x00000000, /* var[3] */ ++ 0x00000000, /* var[4] */ ++ 0x00000000, /* var[5] */ ++ 0x00000000, /* var[6] */ ++ 0x00000000, /* var[7] */ ++ 0x00000000, /* var[8] */ ++ 0x00000000, /* var[9] */ ++ 0x00000000, /* var[10] */ ++ 0x00000000, /* var[11] */ ++ 0x00000000, /* var[12] */ ++ 0x00000000, /* var[13] */ ++ 0x00000000, /* var[14] */ ++ 0x00000000, /* var[15] */ ++ 0x00000000, /* var[16] */ ++ 0x00000000, /* var[17] */ ++ 0x00000000, /* var[18] */ ++ 0x00000000, /* var[19] */ ++ 0x00000000, /* var[20] */ ++ 0x00000000, /* var[21] */ ++ 0x00000000, /* var[22] */ ++ 0x00000000, /* var[23] */ ++ 0xe0000000, /* inc[0] */ ++ 0x20000000, /* inc[1] */ ++ 0x2000ffff, /* inc[2] */ ++ 0x00000000, /* inc[3] */ ++ 0x00000000, /* inc[4] */ ++ 0x00000000, /* inc[5] */ ++ 0x00000000, /* inc[6] */ ++ 0x00000000, /* inc[7] */ ++}; ++ ++u32 MCD_varTab8[]= ++{ /* Task 8 Variable Table */ ++ 0x00000000, /* var[0] */ ++ 0x00000000, /* var[1] */ ++ 0x00000000, /* var[2] */ ++ 0x00000000, /* var[3] */ ++ 0x00000000, /* var[4] */ ++ 0x00000000, /* var[5] */ ++ 0x00000000, /* var[6] */ ++ 0x00000000, /* var[7] */ ++ 0x00000000, /* var[8] */ ++ 0x00000000, /* var[9] */ ++ 0x00000000, /* var[10] */ ++ 0x00000000, /* var[11] */ ++ 0x00000000, /* var[12] */ ++ 0x00000000, /* var[13] */ ++ 0x00000000, /* var[14] */ ++ 0x00000000, /* var[15] */ ++ 0x00000000, /* var[16] */ ++ 0x00000000, /* var[17] */ ++ 0x00000000, /* var[18] */ ++ 0x00000000, /* var[19] */ ++ 0x00000000, /* var[20] */ ++ 0x00000000, /* var[21] */ ++ 0x00000000, /* var[22] */ ++ 0x00000000, /* var[23] */ ++ 0xe0000000, /* inc[0] */ ++ 0x20000000, /* inc[1] */ ++ 0x2000ffff, /* inc[2] */ ++ 0x00000000, /* inc[3] */ ++ 0x00000000, /* inc[4] */ ++ 0x00000000, /* inc[5] */ ++ 0x00000000, /* inc[6] */ ++ 0x00000000, /* inc[7] */ ++}; ++ ++u32 MCD_varTab9[]= ++{ /* Task 9 Variable Table */ ++ 0x00000000, /* var[0] */ ++ 0x00000000, /* var[1] */ ++ 0x00000000, /* var[2] */ ++ 0x00000000, /* var[3] */ ++ 0x00000000, /* var[4] */ ++ 0x00000000, /* var[5] */ ++ 0x00000000, /* var[6] */ ++ 0x00000000, /* var[7] */ ++ 0x00000000, /* var[8] */ ++ 0x00000000, /* var[9] */ ++ 0x00000000, /* var[10] */ ++ 0x00000000, /* var[11] */ ++ 0x00000000, /* var[12] */ ++ 0x00000000, /* var[13] */ ++ 0x00000000, /* var[14] */ ++ 0x00000000, /* var[15] */ ++ 0x00000000, /* var[16] */ ++ 0x00000000, /* var[17] */ ++ 0x00000000, /* var[18] */ ++ 0x00000000, /* var[19] */ ++ 0x00000000, /* var[20] */ ++ 0x00000000, /* var[21] */ ++ 0x00000000, /* var[22] */ ++ 0x00000000, /* var[23] */ ++ 0xe0000000, /* inc[0] */ ++ 0x20000000, /* inc[1] */ ++ 0x2000ffff, /* inc[2] */ ++ 0x00000000, /* inc[3] */ ++ 0x00000000, /* inc[4] */ ++ 0x00000000, /* inc[5] */ ++ 0x00000000, /* inc[6] */ ++ 0x00000000, /* inc[7] */ ++}; ++ ++u32 MCD_varTab10[]= ++{ /* Task 10 Variable Table */ ++ 0x00000000, /* var[0] */ ++ 0x00000000, /* var[1] */ ++ 0x00000000, /* var[2] */ ++ 0x00000000, /* var[3] */ ++ 0x00000000, /* var[4] */ ++ 0x00000000, /* var[5] */ ++ 0x00000000, /* var[6] */ ++ 0x00000000, /* var[7] */ ++ 0x00000000, /* var[8] */ ++ 0x00000000, /* var[9] */ ++ 0x00000000, /* var[10] */ ++ 0x00000000, /* var[11] */ ++ 0x00000000, /* var[12] */ ++ 0x00000000, /* var[13] */ ++ 0x00000000, /* var[14] */ ++ 0x00000000, /* var[15] */ ++ 0x00000000, /* var[16] */ ++ 0x00000000, /* var[17] */ ++ 0x00000000, /* var[18] */ ++ 0x00000000, /* var[19] */ ++ 0x00000000, /* var[20] */ ++ 0x00000000, /* var[21] */ ++ 0x00000000, /* var[22] */ ++ 0x00000000, /* var[23] */ ++ 0xe0000000, /* inc[0] */ ++ 0x20000000, /* inc[1] */ ++ 0x2000ffff, /* inc[2] */ ++ 0x00000000, /* inc[3] */ ++ 0x00000000, /* inc[4] */ ++ 0x00000000, /* inc[5] */ ++ 0x00000000, /* inc[6] */ ++ 0x00000000, /* inc[7] */ ++}; ++ ++u32 MCD_varTab11[]= ++{ /* Task 11 Variable Table */ ++ 0x00000000, /* var[0] */ ++ 0x00000000, /* var[1] */ ++ 0x00000000, /* var[2] */ ++ 0x00000000, /* var[3] */ ++ 0x00000000, /* var[4] */ ++ 0x00000000, /* var[5] */ ++ 0x00000000, /* var[6] */ ++ 0x00000000, /* var[7] */ ++ 0x00000000, /* var[8] */ ++ 0x00000000, /* var[9] */ ++ 0x00000000, /* var[10] */ ++ 0x00000000, /* var[11] */ ++ 0x00000000, /* var[12] */ ++ 0x00000000, /* var[13] */ ++ 0x00000000, /* var[14] */ ++ 0x00000000, /* var[15] */ ++ 0x00000000, /* var[16] */ ++ 0x00000000, /* var[17] */ ++ 0x00000000, /* var[18] */ ++ 0x00000000, /* var[19] */ ++ 0x00000000, /* var[20] */ ++ 0x00000000, /* var[21] */ ++ 0x00000000, /* var[22] */ ++ 0x00000000, /* var[23] */ ++ 0xe0000000, /* inc[0] */ ++ 0x20000000, /* inc[1] */ ++ 0x2000ffff, /* inc[2] */ ++ 0x00000000, /* inc[3] */ ++ 0x00000000, /* inc[4] */ ++ 0x00000000, /* inc[5] */ ++ 0x00000000, /* inc[6] */ ++ 0x00000000, /* inc[7] */ ++}; ++ ++u32 MCD_varTab12[]= ++{ /* Task 12 Variable Table */ ++ 0x00000000, /* var[0] */ ++ 0x00000000, /* var[1] */ ++ 0x00000000, /* var[2] */ ++ 0x00000000, /* var[3] */ ++ 0x00000000, /* var[4] */ ++ 0x00000000, /* var[5] */ ++ 0x00000000, /* var[6] */ ++ 0x00000000, /* var[7] */ ++ 0x00000000, /* var[8] */ ++ 0x00000000, /* var[9] */ ++ 0x00000000, /* var[10] */ ++ 0x00000000, /* var[11] */ ++ 0x00000000, /* var[12] */ ++ 0x00000000, /* var[13] */ ++ 0x00000000, /* var[14] */ ++ 0x00000000, /* var[15] */ ++ 0x00000000, /* var[16] */ ++ 0x00000000, /* var[17] */ ++ 0x00000000, /* var[18] */ ++ 0x00000000, /* var[19] */ ++ 0x00000000, /* var[20] */ ++ 0x00000000, /* var[21] */ ++ 0x00000000, /* var[22] */ ++ 0x00000000, /* var[23] */ ++ 0xe0000000, /* inc[0] */ ++ 0x20000000, /* inc[1] */ ++ 0x2000ffff, /* inc[2] */ ++ 0x00000000, /* inc[3] */ ++ 0x00000000, /* inc[4] */ ++ 0x00000000, /* inc[5] */ ++ 0x00000000, /* inc[6] */ ++ 0x00000000, /* inc[7] */ ++}; ++ ++u32 MCD_varTab13[]= ++{ /* Task 13 Variable Table */ ++ 0x00000000, /* var[0] */ ++ 0x00000000, /* var[1] */ ++ 0x00000000, /* var[2] */ ++ 0x00000000, /* var[3] */ ++ 0x00000000, /* var[4] */ ++ 0x00000000, /* var[5] */ ++ 0x00000000, /* var[6] */ ++ 0x00000000, /* var[7] */ ++ 0x00000000, /* var[8] */ ++ 0x00000000, /* var[9] */ ++ 0x00000000, /* var[10] */ ++ 0x00000000, /* var[11] */ ++ 0x00000000, /* var[12] */ ++ 0x00000000, /* var[13] */ ++ 0x00000000, /* var[14] */ ++ 0x00000000, /* var[15] */ ++ 0x00000000, /* var[16] */ ++ 0x00000000, /* var[17] */ ++ 0x00000000, /* var[18] */ ++ 0x00000000, /* var[19] */ ++ 0x00000000, /* var[20] */ ++ 0x00000000, /* var[21] */ ++ 0x00000000, /* var[22] */ ++ 0x00000000, /* var[23] */ ++ 0xe0000000, /* inc[0] */ ++ 0x20000000, /* inc[1] */ ++ 0x2000ffff, /* inc[2] */ ++ 0x00000000, /* inc[3] */ ++ 0x00000000, /* inc[4] */ ++ 0x00000000, /* inc[5] */ ++ 0x00000000, /* inc[6] */ ++ 0x00000000, /* inc[7] */ ++}; ++ ++u32 MCD_varTab14[]= ++{ /* Task 14 Variable Table */ ++ 0x00000000, /* var[0] */ ++ 0x00000000, /* var[1] */ ++ 0x00000000, /* var[2] */ ++ 0x00000000, /* var[3] */ ++ 0x00000000, /* var[4] */ ++ 0x00000000, /* var[5] */ ++ 0x00000000, /* var[6] */ ++ 0x00000000, /* var[7] */ ++ 0x00000000, /* var[8] */ ++ 0x00000000, /* var[9] */ ++ 0x00000000, /* var[10] */ ++ 0x00000000, /* var[11] */ ++ 0x00000000, /* var[12] */ ++ 0x00000000, /* var[13] */ ++ 0x00000000, /* var[14] */ ++ 0x00000000, /* var[15] */ ++ 0x00000000, /* var[16] */ ++ 0x00000000, /* var[17] */ ++ 0x00000000, /* var[18] */ ++ 0x00000000, /* var[19] */ ++ 0x00000000, /* var[20] */ ++ 0x00000000, /* var[21] */ ++ 0x00000000, /* var[22] */ ++ 0x00000000, /* var[23] */ ++ 0xe0000000, /* inc[0] */ ++ 0x20000000, /* inc[1] */ ++ 0x2000ffff, /* inc[2] */ ++ 0x00000000, /* inc[3] */ ++ 0x00000000, /* inc[4] */ ++ 0x00000000, /* inc[5] */ ++ 0x00000000, /* inc[6] */ ++ 0x00000000, /* inc[7] */ ++}; ++ ++u32 MCD_varTab15[]= ++{ /* Task 15 Variable Table */ ++ 0x00000000, /* var[0] */ ++ 0x00000000, /* var[1] */ ++ 0x00000000, /* var[2] */ ++ 0x00000000, /* var[3] */ ++ 0x00000000, /* var[4] */ ++ 0x00000000, /* var[5] */ ++ 0x00000000, /* var[6] */ ++ 0x00000000, /* var[7] */ ++ 0x00000000, /* var[8] */ ++ 0x00000000, /* var[9] */ ++ 0x00000000, /* var[10] */ ++ 0x00000000, /* var[11] */ ++ 0x00000000, /* var[12] */ ++ 0x00000000, /* var[13] */ ++ 0x00000000, /* var[14] */ ++ 0x00000000, /* var[15] */ ++ 0x00000000, /* var[16] */ ++ 0x00000000, /* var[17] */ ++ 0x00000000, /* var[18] */ ++ 0x00000000, /* var[19] */ ++ 0x00000000, /* var[20] */ ++ 0x00000000, /* var[21] */ ++ 0x00000000, /* var[22] */ ++ 0x00000000, /* var[23] */ ++ 0xe0000000, /* inc[0] */ ++ 0x20000000, /* inc[1] */ ++ 0x2000ffff, /* inc[2] */ ++ 0x00000000, /* inc[3] */ ++ 0x00000000, /* inc[4] */ ++ 0x00000000, /* inc[5] */ ++ 0x00000000, /* inc[6] */ ++ 0x00000000, /* inc[7] */ ++}; ++ ++u32 MCD_funcDescTab0[]= ++{ /* Task 0 Function Descriptor Table */ ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0xa0045670, /* mainFunc(), EU# 3 */ ++ 0xa0000000, /* rsduFunc(), EU# 3 */ ++ 0xa0000000, /* crcAccumVal(), EU# 3 */ ++ 0x20000000, /* setCrcAccum(), EU# 3 */ ++ 0x21800000, /* and(), EU# 3 */ ++ 0x21e00000, /* or(), EU# 3 */ ++ 0x20400000, /* add(), EU# 3 */ ++ 0x20500000, /* sub(), EU# 3 */ ++ 0x205a0000, /* andNot(), EU# 3 */ ++ 0x20a00000, /* shiftR(), EU# 3 */ ++ 0x202fa000, /* andReadyBit(), EU# 3 */ ++ 0x202f9000, /* andNotReadyBit(), EU# 3 */ ++ 0x202ea000, /* andWrapBit(), EU# 3 */ ++ 0x202da000, /* andLastBit(), EU# 3 */ ++ 0x202e2000, /* andInterruptBit(), EU# 3 */ ++ 0x202f2000, /* andCrcRestartBit(), EU# 3 */ ++}; ++ ++#ifdef MCD_INCLUDE_EU ++u32 MCD_funcDescTab1[]= ++{ /* Task 1 Function Descriptor Table */ ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0xa0045670, /* mainFunc(), EU# 3 */ ++ 0xa0000000, /* rsduFunc(), EU# 3 */ ++ 0xa0000000, /* crcAccumVal(), EU# 3 */ ++ 0x20000000, /* setCrcAccum(), EU# 3 */ ++ 0x21800000, /* and(), EU# 3 */ ++ 0x21e00000, /* or(), EU# 3 */ ++ 0x20400000, /* add(), EU# 3 */ ++ 0x20500000, /* sub(), EU# 3 */ ++ 0x205a0000, /* andNot(), EU# 3 */ ++ 0x20a00000, /* shiftR(), EU# 3 */ ++ 0x202fa000, /* andReadyBit(), EU# 3 */ ++ 0x202f9000, /* andNotReadyBit(), EU# 3 */ ++ 0x202ea000, /* andWrapBit(), EU# 3 */ ++ 0x202da000, /* andLastBit(), EU# 3 */ ++ 0x202e2000, /* andInterruptBit(), EU# 3 */ ++ 0x202f2000, /* andCrcRestartBit(), EU# 3 */ ++}; ++ ++u32 MCD_funcDescTab2[]= ++{ /* Task 2 Function Descriptor Table */ ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0xa0045670, /* mainFunc(), EU# 3 */ ++ 0xa0000000, /* rsduFunc(), EU# 3 */ ++ 0xa0000000, /* crcAccumVal(), EU# 3 */ ++ 0x20000000, /* setCrcAccum(), EU# 3 */ ++ 0x21800000, /* and(), EU# 3 */ ++ 0x21e00000, /* or(), EU# 3 */ ++ 0x20400000, /* add(), EU# 3 */ ++ 0x20500000, /* sub(), EU# 3 */ ++ 0x205a0000, /* andNot(), EU# 3 */ ++ 0x20a00000, /* shiftR(), EU# 3 */ ++ 0x202fa000, /* andReadyBit(), EU# 3 */ ++ 0x202f9000, /* andNotReadyBit(), EU# 3 */ ++ 0x202ea000, /* andWrapBit(), EU# 3 */ ++ 0x202da000, /* andLastBit(), EU# 3 */ ++ 0x202e2000, /* andInterruptBit(), EU# 3 */ ++ 0x202f2000, /* andCrcRestartBit(), EU# 3 */ ++}; ++ ++u32 MCD_funcDescTab3[]= ++{ /* Task 3 Function Descriptor Table */ ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0xa0045670, /* mainFunc(), EU# 3 */ ++ 0xa0000000, /* rsduFunc(), EU# 3 */ ++ 0xa0000000, /* crcAccumVal(), EU# 3 */ ++ 0x20000000, /* setCrcAccum(), EU# 3 */ ++ 0x21800000, /* and(), EU# 3 */ ++ 0x21e00000, /* or(), EU# 3 */ ++ 0x20400000, /* add(), EU# 3 */ ++ 0x20500000, /* sub(), EU# 3 */ ++ 0x205a0000, /* andNot(), EU# 3 */ ++ 0x20a00000, /* shiftR(), EU# 3 */ ++ 0x202fa000, /* andReadyBit(), EU# 3 */ ++ 0x202f9000, /* andNotReadyBit(), EU# 3 */ ++ 0x202ea000, /* andWrapBit(), EU# 3 */ ++ 0x202da000, /* andLastBit(), EU# 3 */ ++ 0x202e2000, /* andInterruptBit(), EU# 3 */ ++ 0x202f2000, /* andCrcRestartBit(), EU# 3 */ ++}; ++ ++u32 MCD_funcDescTab4[]= ++{ /* Task 4 Function Descriptor Table */ ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0xa0045670, /* mainFunc(), EU# 3 */ ++ 0xa0000000, /* rsduFunc(), EU# 3 */ ++ 0xa0000000, /* crcAccumVal(), EU# 3 */ ++ 0x20000000, /* setCrcAccum(), EU# 3 */ ++ 0x21800000, /* and(), EU# 3 */ ++ 0x21e00000, /* or(), EU# 3 */ ++ 0x20400000, /* add(), EU# 3 */ ++ 0x20500000, /* sub(), EU# 3 */ ++ 0x205a0000, /* andNot(), EU# 3 */ ++ 0x20a00000, /* shiftR(), EU# 3 */ ++ 0x202fa000, /* andReadyBit(), EU# 3 */ ++ 0x202f9000, /* andNotReadyBit(), EU# 3 */ ++ 0x202ea000, /* andWrapBit(), EU# 3 */ ++ 0x202da000, /* andLastBit(), EU# 3 */ ++ 0x202e2000, /* andInterruptBit(), EU# 3 */ ++ 0x202f2000, /* andCrcRestartBit(), EU# 3 */ ++}; ++ ++u32 MCD_funcDescTab5[]= ++{ /* Task 5 Function Descriptor Table */ ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0xa0045670, /* mainFunc(), EU# 3 */ ++ 0xa0000000, /* rsduFunc(), EU# 3 */ ++ 0xa0000000, /* crcAccumVal(), EU# 3 */ ++ 0x20000000, /* setCrcAccum(), EU# 3 */ ++ 0x21800000, /* and(), EU# 3 */ ++ 0x21e00000, /* or(), EU# 3 */ ++ 0x20400000, /* add(), EU# 3 */ ++ 0x20500000, /* sub(), EU# 3 */ ++ 0x205a0000, /* andNot(), EU# 3 */ ++ 0x20a00000, /* shiftR(), EU# 3 */ ++ 0x202fa000, /* andReadyBit(), EU# 3 */ ++ 0x202f9000, /* andNotReadyBit(), EU# 3 */ ++ 0x202ea000, /* andWrapBit(), EU# 3 */ ++ 0x202da000, /* andLastBit(), EU# 3 */ ++ 0x202e2000, /* andInterruptBit(), EU# 3 */ ++ 0x202f2000, /* andCrcRestartBit(), EU# 3 */ ++}; ++ ++u32 MCD_funcDescTab6[]= ++{ /* Task 6 Function Descriptor Table */ ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0xa0045670, /* mainFunc(), EU# 3 */ ++ 0xa0000000, /* rsduFunc(), EU# 3 */ ++ 0xa0000000, /* crcAccumVal(), EU# 3 */ ++ 0x20000000, /* setCrcAccum(), EU# 3 */ ++ 0x21800000, /* and(), EU# 3 */ ++ 0x21e00000, /* or(), EU# 3 */ ++ 0x20400000, /* add(), EU# 3 */ ++ 0x20500000, /* sub(), EU# 3 */ ++ 0x205a0000, /* andNot(), EU# 3 */ ++ 0x20a00000, /* shiftR(), EU# 3 */ ++ 0x202fa000, /* andReadyBit(), EU# 3 */ ++ 0x202f9000, /* andNotReadyBit(), EU# 3 */ ++ 0x202ea000, /* andWrapBit(), EU# 3 */ ++ 0x202da000, /* andLastBit(), EU# 3 */ ++ 0x202e2000, /* andInterruptBit(), EU# 3 */ ++ 0x202f2000, /* andCrcRestartBit(), EU# 3 */ ++}; ++ ++u32 MCD_funcDescTab7[]= ++{ /* Task 7 Function Descriptor Table */ ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0xa0045670, /* mainFunc(), EU# 3 */ ++ 0xa0000000, /* rsduFunc(), EU# 3 */ ++ 0xa0000000, /* crcAccumVal(), EU# 3 */ ++ 0x20000000, /* setCrcAccum(), EU# 3 */ ++ 0x21800000, /* and(), EU# 3 */ ++ 0x21e00000, /* or(), EU# 3 */ ++ 0x20400000, /* add(), EU# 3 */ ++ 0x20500000, /* sub(), EU# 3 */ ++ 0x205a0000, /* andNot(), EU# 3 */ ++ 0x20a00000, /* shiftR(), EU# 3 */ ++ 0x202fa000, /* andReadyBit(), EU# 3 */ ++ 0x202f9000, /* andNotReadyBit(), EU# 3 */ ++ 0x202ea000, /* andWrapBit(), EU# 3 */ ++ 0x202da000, /* andLastBit(), EU# 3 */ ++ 0x202e2000, /* andInterruptBit(), EU# 3 */ ++ 0x202f2000, /* andCrcRestartBit(), EU# 3 */ ++}; ++ ++u32 MCD_funcDescTab8[]= ++{ /* Task 8 Function Descriptor Table */ ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0xa0045670, /* mainFunc(), EU# 3 */ ++ 0xa0000000, /* rsduFunc(), EU# 3 */ ++ 0xa0000000, /* crcAccumVal(), EU# 3 */ ++ 0x20000000, /* setCrcAccum(), EU# 3 */ ++ 0x21800000, /* and(), EU# 3 */ ++ 0x21e00000, /* or(), EU# 3 */ ++ 0x20400000, /* add(), EU# 3 */ ++ 0x20500000, /* sub(), EU# 3 */ ++ 0x205a0000, /* andNot(), EU# 3 */ ++ 0x20a00000, /* shiftR(), EU# 3 */ ++ 0x202fa000, /* andReadyBit(), EU# 3 */ ++ 0x202f9000, /* andNotReadyBit(), EU# 3 */ ++ 0x202ea000, /* andWrapBit(), EU# 3 */ ++ 0x202da000, /* andLastBit(), EU# 3 */ ++ 0x202e2000, /* andInterruptBit(), EU# 3 */ ++ 0x202f2000, /* andCrcRestartBit(), EU# 3 */ ++}; ++ ++u32 MCD_funcDescTab9[]= ++{ /* Task 9 Function Descriptor Table */ ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0xa0045670, /* mainFunc(), EU# 3 */ ++ 0xa0000000, /* rsduFunc(), EU# 3 */ ++ 0xa0000000, /* crcAccumVal(), EU# 3 */ ++ 0x20000000, /* setCrcAccum(), EU# 3 */ ++ 0x21800000, /* and(), EU# 3 */ ++ 0x21e00000, /* or(), EU# 3 */ ++ 0x20400000, /* add(), EU# 3 */ ++ 0x20500000, /* sub(), EU# 3 */ ++ 0x205a0000, /* andNot(), EU# 3 */ ++ 0x20a00000, /* shiftR(), EU# 3 */ ++ 0x202fa000, /* andReadyBit(), EU# 3 */ ++ 0x202f9000, /* andNotReadyBit(), EU# 3 */ ++ 0x202ea000, /* andWrapBit(), EU# 3 */ ++ 0x202da000, /* andLastBit(), EU# 3 */ ++ 0x202e2000, /* andInterruptBit(), EU# 3 */ ++ 0x202f2000, /* andCrcRestartBit(), EU# 3 */ ++}; ++ ++u32 MCD_funcDescTab10[]= ++{ /* Task 10 Function Descriptor Table */ ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0xa0045670, /* mainFunc(), EU# 3 */ ++ 0xa0000000, /* rsduFunc(), EU# 3 */ ++ 0xa0000000, /* crcAccumVal(), EU# 3 */ ++ 0x20000000, /* setCrcAccum(), EU# 3 */ ++ 0x21800000, /* and(), EU# 3 */ ++ 0x21e00000, /* or(), EU# 3 */ ++ 0x20400000, /* add(), EU# 3 */ ++ 0x20500000, /* sub(), EU# 3 */ ++ 0x205a0000, /* andNot(), EU# 3 */ ++ 0x20a00000, /* shiftR(), EU# 3 */ ++ 0x202fa000, /* andReadyBit(), EU# 3 */ ++ 0x202f9000, /* andNotReadyBit(), EU# 3 */ ++ 0x202ea000, /* andWrapBit(), EU# 3 */ ++ 0x202da000, /* andLastBit(), EU# 3 */ ++ 0x202e2000, /* andInterruptBit(), EU# 3 */ ++ 0x202f2000, /* andCrcRestartBit(), EU# 3 */ ++}; ++ ++u32 MCD_funcDescTab11[]= ++{ /* Task 11 Function Descriptor Table */ ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0xa0045670, /* mainFunc(), EU# 3 */ ++ 0xa0000000, /* rsduFunc(), EU# 3 */ ++ 0xa0000000, /* crcAccumVal(), EU# 3 */ ++ 0x20000000, /* setCrcAccum(), EU# 3 */ ++ 0x21800000, /* and(), EU# 3 */ ++ 0x21e00000, /* or(), EU# 3 */ ++ 0x20400000, /* add(), EU# 3 */ ++ 0x20500000, /* sub(), EU# 3 */ ++ 0x205a0000, /* andNot(), EU# 3 */ ++ 0x20a00000, /* shiftR(), EU# 3 */ ++ 0x202fa000, /* andReadyBit(), EU# 3 */ ++ 0x202f9000, /* andNotReadyBit(), EU# 3 */ ++ 0x202ea000, /* andWrapBit(), EU# 3 */ ++ 0x202da000, /* andLastBit(), EU# 3 */ ++ 0x202e2000, /* andInterruptBit(), EU# 3 */ ++ 0x202f2000, /* andCrcRestartBit(), EU# 3 */ ++}; ++ ++u32 MCD_funcDescTab12[]= ++{ /* Task 12 Function Descriptor Table */ ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0xa0045670, /* mainFunc(), EU# 3 */ ++ 0xa0000000, /* rsduFunc(), EU# 3 */ ++ 0xa0000000, /* crcAccumVal(), EU# 3 */ ++ 0x20000000, /* setCrcAccum(), EU# 3 */ ++ 0x21800000, /* and(), EU# 3 */ ++ 0x21e00000, /* or(), EU# 3 */ ++ 0x20400000, /* add(), EU# 3 */ ++ 0x20500000, /* sub(), EU# 3 */ ++ 0x205a0000, /* andNot(), EU# 3 */ ++ 0x20a00000, /* shiftR(), EU# 3 */ ++ 0x202fa000, /* andReadyBit(), EU# 3 */ ++ 0x202f9000, /* andNotReadyBit(), EU# 3 */ ++ 0x202ea000, /* andWrapBit(), EU# 3 */ ++ 0x202da000, /* andLastBit(), EU# 3 */ ++ 0x202e2000, /* andInterruptBit(), EU# 3 */ ++ 0x202f2000, /* andCrcRestartBit(), EU# 3 */ ++}; ++ ++u32 MCD_funcDescTab13[]= ++{ /* Task 13 Function Descriptor Table */ ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0xa0045670, /* mainFunc(), EU# 3 */ ++ 0xa0000000, /* rsduFunc(), EU# 3 */ ++ 0xa0000000, /* crcAccumVal(), EU# 3 */ ++ 0x20000000, /* setCrcAccum(), EU# 3 */ ++ 0x21800000, /* and(), EU# 3 */ ++ 0x21e00000, /* or(), EU# 3 */ ++ 0x20400000, /* add(), EU# 3 */ ++ 0x20500000, /* sub(), EU# 3 */ ++ 0x205a0000, /* andNot(), EU# 3 */ ++ 0x20a00000, /* shiftR(), EU# 3 */ ++ 0x202fa000, /* andReadyBit(), EU# 3 */ ++ 0x202f9000, /* andNotReadyBit(), EU# 3 */ ++ 0x202ea000, /* andWrapBit(), EU# 3 */ ++ 0x202da000, /* andLastBit(), EU# 3 */ ++ 0x202e2000, /* andInterruptBit(), EU# 3 */ ++ 0x202f2000, /* andCrcRestartBit(), EU# 3 */ ++}; ++ ++u32 MCD_funcDescTab14[]= ++{ /* Task 14 Function Descriptor Table */ ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0xa0045670, /* mainFunc(), EU# 3 */ ++ 0xa0000000, /* rsduFunc(), EU# 3 */ ++ 0xa0000000, /* crcAccumVal(), EU# 3 */ ++ 0x20000000, /* setCrcAccum(), EU# 3 */ ++ 0x21800000, /* and(), EU# 3 */ ++ 0x21e00000, /* or(), EU# 3 */ ++ 0x20400000, /* add(), EU# 3 */ ++ 0x20500000, /* sub(), EU# 3 */ ++ 0x205a0000, /* andNot(), EU# 3 */ ++ 0x20a00000, /* shiftR(), EU# 3 */ ++ 0x202fa000, /* andReadyBit(), EU# 3 */ ++ 0x202f9000, /* andNotReadyBit(), EU# 3 */ ++ 0x202ea000, /* andWrapBit(), EU# 3 */ ++ 0x202da000, /* andLastBit(), EU# 3 */ ++ 0x202e2000, /* andInterruptBit(), EU# 3 */ ++ 0x202f2000, /* andCrcRestartBit(), EU# 3 */ ++}; ++ ++u32 MCD_funcDescTab15[]= ++{ /* Task 15 Function Descriptor Table */ ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0xa0045670, /* mainFunc(), EU# 3 */ ++ 0xa0000000, /* rsduFunc(), EU# 3 */ ++ 0xa0000000, /* crcAccumVal(), EU# 3 */ ++ 0x20000000, /* setCrcAccum(), EU# 3 */ ++ 0x21800000, /* and(), EU# 3 */ ++ 0x21e00000, /* or(), EU# 3 */ ++ 0x20400000, /* add(), EU# 3 */ ++ 0x20500000, /* sub(), EU# 3 */ ++ 0x205a0000, /* andNot(), EU# 3 */ ++ 0x20a00000, /* shiftR(), EU# 3 */ ++ 0x202fa000, /* andReadyBit(), EU# 3 */ ++ 0x202f9000, /* andNotReadyBit(), EU# 3 */ ++ 0x202ea000, /* andWrapBit(), EU# 3 */ ++ 0x202da000, /* andLastBit(), EU# 3 */ ++ 0x202e2000, /* andInterruptBit(), EU# 3 */ ++ 0x202f2000, /* andCrcRestartBit(), EU# 3 */ ++}; ++#endif /*MCD_INCLUDE_EU*/ ++ ++u32 MCD_contextSave0[128]; /* Task 0 context save space */ ++u32 MCD_contextSave1[128]; /* Task 1 context save space */ ++u32 MCD_contextSave2[128]; /* Task 2 context save space */ ++u32 MCD_contextSave3[128]; /* Task 3 context save space */ ++u32 MCD_contextSave4[128]; /* Task 4 context save space */ ++u32 MCD_contextSave5[128]; /* Task 5 context save space */ ++u32 MCD_contextSave6[128]; /* Task 6 context save space */ ++u32 MCD_contextSave7[128]; /* Task 7 context save space */ ++u32 MCD_contextSave8[128]; /* Task 8 context save space */ ++u32 MCD_contextSave9[128]; /* Task 9 context save space */ ++u32 MCD_contextSave10[128]; /* Task 10 context save space */ ++u32 MCD_contextSave11[128]; /* Task 11 context save space */ ++u32 MCD_contextSave12[128]; /* Task 12 context save space */ ++u32 MCD_contextSave13[128]; /* Task 13 context save space */ ++u32 MCD_contextSave14[128]; /* Task 14 context save space */ ++u32 MCD_contextSave15[128]; /* Task 15 context save space */ ++ ++u32 MCD_ChainNoEu_TDT[]; ++u32 MCD_SingleNoEu_TDT[]; ++#ifdef MCD_INCLUDE_EU ++u32 MCD_ChainEu_TDT[]; ++u32 MCD_SingleEu_TDT[]; ++#endif ++u32 MCD_ENetRcv_TDT[]; ++u32 MCD_ENetXmit_TDT[]; ++ ++u32 MCD_modelTaskTableSrc[]= ++{ ++ (u32)MCD_ChainNoEu_TDT, ++ (u32)&((u8*)MCD_ChainNoEu_TDT)[0x0000016c], ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ (u32)MCD_SingleNoEu_TDT, ++ (u32)&((u8*)MCD_SingleNoEu_TDT)[0x000000d4], ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++#ifdef MCD_INCLUDE_EU ++ (u32)MCD_ChainEu_TDT, ++ (u32)&((u8*)MCD_ChainEu_TDT)[0x000001b4], ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ (u32)MCD_SingleEu_TDT, ++ (u32)&((u8*)MCD_SingleEu_TDT)[0x00000124], ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++#endif ++ (u32)MCD_ENetRcv_TDT, ++ (u32)&((u8*)MCD_ENetRcv_TDT)[0x000000a4], ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ (u32)MCD_ENetXmit_TDT, ++ (u32)&((u8*)MCD_ENetXmit_TDT)[0x000000d0], ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++ 0x00000000, ++}; ++u32 MCD_ChainNoEu_TDT[]= ++{ ++ 0x80004000, /* 0000(:370): LCDEXT: idx0 = 0x00000000; ; */ ++ 0x8118801b, /* 0004(:370): LCD: idx1 = var2; idx1 once var0; idx1 += inc3 */ ++ 0xb8c60018, /* 0008(:371): LCD: idx2 = *(idx1 + var12); idx2 once var0; idx2 += inc3 */ ++ 0x10002b10, /* 000C(:372): DRD1A: var10 = idx2; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x7000000d, /* 0010(:373): DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT MORE init=0 WS=0 RS=0 */ ++ 0x018cf89f, /* 0014(:373): DRD2B1: var6 = EU3(); EU3(idx2) */ ++ 0x6000000a, /* 0018(:374): DRD2A: EU0=0 EU1=0 EU2=0 EU3=10 EXT init=0 WS=0 RS=0 */ ++ 0x080cf89f, /* 001C(:374): DRD2B1: idx0 = EU3(); EU3(idx2) */ ++ 0x000001f8, /* 0020(:0): NOP */ ++ 0x98180364, /* 0024(:378): LCD: idx0 = idx0; idx0 == var13; idx0 += inc4 */ ++ 0x8118801b, /* 0028(:380): LCD: idx1 = var2; idx1 once var0; idx1 += inc3 */ ++ 0xf8c6001a, /* 002C(:381): LCDEXT: idx2 = *(idx1 + var12 + 8); idx2 once var0; idx2 += inc3 */ ++ 0xb8c6601b, /* 0030(:382): LCD: idx3 = *(idx1 + var12 + 12); ; idx3 += inc3 */ ++ 0x10002710, /* 0034(:384): DRD1A: var9 = idx2; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x00000f18, /* 0038(:385): DRD1A: var3 = idx3; FN=0 init=0 WS=0 RS=0 */ ++ 0xb8c6001d, /* 003C(:387): LCD: idx2 = *(idx1 + var12 + 20); idx2 once var0; idx2 += inc3 */ ++ 0x10001310, /* 0040(:388): DRD1A: var4 = idx2; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x60000007, /* 0044(:389): DRD2A: EU0=0 EU1=0 EU2=0 EU3=7 EXT init=0 WS=0 RS=0 */ ++ 0x014cf88b, /* 0048(:389): DRD2B1: var5 = EU3(); EU3(idx2,var11) */ ++ 0x98c6001c, /* 004C(:391): LCD: idx2 = idx1 + var12 + 4; idx2 once var0; idx2 += inc3 */ ++ 0x00000710, /* 0050(:392): DRD1A: var1 = idx2; FN=0 init=0 WS=0 RS=0 */ ++ 0x98c70018, /* 0054(:393): LCD: idx2 = idx1 + var14; idx2 once var0; idx2 += inc3 */ ++ 0x10001f10, /* 0058(:394): DRD1A: var7 = idx2; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x0000c818, /* 005C(:395): DRD1A: *idx2 = var3; FN=0 init=0 WS=0 RS=0 */ ++ 0x000001f8, /* 0060(:0): NOP */ ++ 0xc1476018, /* 0064(:399): LCDEXT: idx1 = var2 + var14; ; idx1 += inc3 */ ++ 0xc003231d, /* 0068(:399): LCDEXT: idx2 = var0, idx3 = var6; idx3 == var12; idx2 += inc3, idx3 += inc5 */ ++ 0x811a601b, /* 006C(:400): LCD: idx4 = var2; ; idx4 += inc3 */ ++ 0xc1862102, /* 0070(:403): LCDEXT: idx5 = var3, idx6 = var12; idx6 < var4; idx5 += inc0, idx6 += inc2 */ ++ 0x849be009, /* 0074(:403): LCD: idx7 = var9; ; idx7 += inc1 */ ++ 0x03fed7b8, /* 0078(:406): DRD1A: *idx7; FN=0 init=31 WS=3 RS=3 */ ++ 0xda9b001b, /* 007C(:408): LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */ ++ 0x9b9be01b, /* 0080(:408): LCD: idx7 = idx7; ; idx7 += inc3 */ ++ 0x1000cb20, /* 0084(:409): DRD1A: *idx2 = idx4; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x70000006, /* 0088(:410): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ ++ 0x088cf88f, /* 008C(:410): DRD2B1: idx2 = EU3(); EU3(idx2,var15) */ ++ 0x1000cb28, /* 0090(:411): DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x70000006, /* 0094(:412): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ ++ 0x088cf88f, /* 0098(:412): DRD2B1: idx2 = EU3(); EU3(idx2,var15) */ ++ 0x1000cb30, /* 009C(:413): DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x70000006, /* 00A0(:414): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ ++ 0x088cf88f, /* 00A4(:414): DRD2B1: idx2 = EU3(); EU3(idx2,var15) */ ++ 0x1000cb38, /* 00A8(:415): DRD1A: *idx2 = idx7; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x0000c728, /* 00AC(:416): DRD1A: *idx1 = idx5; FN=0 init=0 WS=0 RS=0 */ ++ 0x000001f8, /* 00B0(:0): NOP */ ++ 0xc1476018, /* 00B4(:420): LCDEXT: idx1 = var2 + var14; ; idx1 += inc3 */ ++ 0xc003241d, /* 00B8(:420): LCDEXT: idx2 = var0, idx3 = var6; idx3 == var16; idx2 += inc3, idx3 += inc5 */ ++ 0x811a601b, /* 00BC(:421): LCD: idx4 = var2; ; idx4 += inc3 */ ++ 0xda9b001b, /* 00C0(:424): LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */ ++ 0x9b9be01b, /* 00C4(:424): LCD: idx7 = idx7; ; idx7 += inc3 */ ++ 0x0000d3a0, /* 00C8(:425): DRD1A: *idx4; FN=0 init=0 WS=0 RS=0 */ ++ 0xc1862102, /* 00CC(:427): LCDEXT: idx5 = var3, idx6 = var12; idx6 < var4; idx5 += inc0, idx6 += inc2 */ ++ 0x849be009, /* 00D0(:427): LCD: idx7 = var9; ; idx7 += inc1 */ ++ 0x0bfed7b8, /* 00D4(:430): DRD1A: *idx7; FN=0 TFD init=31 WS=3 RS=3 */ ++ 0xda9b001b, /* 00D8(:432): LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */ ++ 0x9b9be01b, /* 00DC(:432): LCD: idx7 = idx7; ; idx7 += inc3 */ ++ 0x1000cb20, /* 00E0(:433): DRD1A: *idx2 = idx4; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x70000006, /* 00E4(:434): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ ++ 0x088cf88f, /* 00E8(:434): DRD2B1: idx2 = EU3(); EU3(idx2,var15) */ ++ 0x1000cb28, /* 00EC(:435): DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x70000006, /* 00F0(:436): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ ++ 0x088cf88f, /* 00F4(:436): DRD2B1: idx2 = EU3(); EU3(idx2,var15) */ ++ 0x1000cb30, /* 00F8(:437): DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x70000006, /* 00FC(:438): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ ++ 0x088cf88f, /* 0100(:438): DRD2B1: idx2 = EU3(); EU3(idx2,var15) */ ++ 0x1000cb38, /* 0104(:439): DRD1A: *idx2 = idx7; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x0000c728, /* 0108(:440): DRD1A: *idx1 = idx5; FN=0 init=0 WS=0 RS=0 */ ++ 0x000001f8, /* 010C(:0): NOP */ ++ 0x8118801b, /* 0110(:444): LCD: idx1 = var2; idx1 once var0; idx1 += inc3 */ ++ 0xd8c60018, /* 0114(:446): LCDEXT: idx2 = idx1 + var12; idx2 once var0; idx2 += inc3 */ ++ 0x98c6601c, /* 0118(:446): LCD: idx3 = idx1 + var12 + 4; ; idx3 += inc3 */ ++ 0x6000000b, /* 011C(:447): DRD2A: EU0=0 EU1=0 EU2=0 EU3=11 EXT init=0 WS=0 RS=0 */ ++ 0x0c8cfc9f, /* 0120(:447): DRD2B1: *idx2 = EU3(); EU3(*idx2) */ ++ 0x000001f8, /* 0124(:0): NOP */ ++ 0xa146001e, /* 0128(:450): LCD: idx1 = *(var2 + var12 + 24); idx1 once var0; idx1 += inc3 */ ++ 0x10000b08, /* 012C(:451): DRD1A: var2 = idx1; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x10002050, /* 0130(:452): DRD1A: var8 = var10; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0xb8c60018, /* 0134(:453): LCD: idx2 = *(idx1 + var12); idx2 once var0; idx2 += inc3 */ ++ 0x10002b10, /* 0138(:454): DRD1A: var10 = idx2; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x7000000a, /* 013C(:455): DRD2A: EU0=0 EU1=0 EU2=0 EU3=10 EXT MORE init=0 WS=0 RS=0 */ ++ 0x080cf89f, /* 0140(:455): DRD2B1: idx0 = EU3(); EU3(idx2) */ ++ 0x6000000d, /* 0144(:456): DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT init=0 WS=0 RS=0 */ ++ 0x018cf89f, /* 0148(:456): DRD2B1: var6 = EU3(); EU3(idx2) */ ++ 0x000001f8, /* 014C(:0): NOP */ ++ 0x8618801b, /* 0150(:462): LCD: idx1 = var12; idx1 once var0; idx1 += inc3 */ ++ 0x7000000e, /* 0154(:463): DRD2A: EU0=0 EU1=0 EU2=0 EU3=14 EXT MORE init=0 WS=0 RS=0 */ ++ 0x084cf21f, /* 0158(:463): DRD2B1: idx1 = EU3(); EU3(var8) */ ++ 0xd8990336, /* 015C(:464): LCDEXT: idx2 = idx1; idx2 > var12; idx2 += inc6 */ ++ 0x8019801b, /* 0160(:464): LCD: idx3 = var0; idx3 once var0; idx3 += inc3 */ ++ 0x040001f8, /* 0164(:465): DRD1A: FN=0 INT init=0 WS=0 RS=0 */ ++ 0x000001f8, /* 0168(:0): NOP */ ++ 0x000001f8, /* 016C(:0): NOP */ ++}; ++u32 MCD_SingleNoEu_TDT[]= ++{ ++ 0x8198001b, /* 0000(:657): LCD: idx0 = var3; idx0 once var0; idx0 += inc3 */ ++ 0x7000000d, /* 0004(:658): DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT MORE init=0 WS=0 RS=0 */ ++ 0x080cf81f, /* 0008(:658): DRD2B1: idx0 = EU3(); EU3(idx0) */ ++ 0x8198801b, /* 000C(:659): LCD: idx1 = var3; idx1 once var0; idx1 += inc3 */ ++ 0x6000000e, /* 0010(:660): DRD2A: EU0=0 EU1=0 EU2=0 EU3=14 EXT init=0 WS=0 RS=0 */ ++ 0x084cf85f, /* 0014(:660): DRD2B1: idx1 = EU3(); EU3(idx1) */ ++ 0x000001f8, /* 0018(:0): NOP */ ++ 0x8298001b, /* 001C(:664): LCD: idx0 = var5; idx0 once var0; idx0 += inc3 */ ++ 0x7000000d, /* 0020(:665): DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT MORE init=0 WS=0 RS=0 */ ++ 0x010cf81f, /* 0024(:665): DRD2B1: var4 = EU3(); EU3(idx0) */ ++ 0x6000000e, /* 0028(:666): DRD2A: EU0=0 EU1=0 EU2=0 EU3=14 EXT init=0 WS=0 RS=0 */ ++ 0x018cf81f, /* 002C(:666): DRD2B1: var6 = EU3(); EU3(idx0) */ ++ 0xc202601b, /* 0030(:669): LCDEXT: idx0 = var4, idx1 = var4; ; idx0 += inc3, idx1 += inc3 */ ++ 0xc002221c, /* 0034(:669): LCDEXT: idx2 = var0, idx3 = var4; idx3 == var8; idx2 += inc3, idx3 += inc4 */ ++ 0x809a601b, /* 0038(:670): LCD: idx4 = var1; ; idx4 += inc3 */ ++ 0xc10420c2, /* 003C(:673): LCDEXT: idx5 = var2, idx6 = var8; idx6 < var3; idx5 += inc0, idx6 += inc2 */ ++ 0x839be009, /* 0040(:673): LCD: idx7 = var7; ; idx7 += inc1 */ ++ 0x03fed7b8, /* 0044(:676): DRD1A: *idx7; FN=0 init=31 WS=3 RS=3 */ ++ 0xda9b001b, /* 0048(:678): LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */ ++ 0x9b9be01b, /* 004C(:678): LCD: idx7 = idx7; ; idx7 += inc3 */ ++ 0x70000006, /* 0050(:680): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ ++ 0x088cf889, /* 0054(:680): DRD2B1: idx2 = EU3(); EU3(idx2,var9) */ ++ 0x1000cb28, /* 0058(:681): DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x70000006, /* 005C(:682): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ ++ 0x088cf889, /* 0060(:682): DRD2B1: idx2 = EU3(); EU3(idx2,var9) */ ++ 0x1000cb30, /* 0064(:683): DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x70000006, /* 0068(:684): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ ++ 0x088cf889, /* 006C(:684): DRD2B1: idx2 = EU3(); EU3(idx2,var9) */ ++ 0x0000cb38, /* 0070(:685): DRD1A: *idx2 = idx7; FN=0 init=0 WS=0 RS=0 */ ++ 0x000001f8, /* 0074(:0): NOP */ ++ 0xc202601b, /* 0078(:689): LCDEXT: idx0 = var4, idx1 = var4; ; idx0 += inc3, idx1 += inc3 */ ++ 0xc002229c, /* 007C(:689): LCDEXT: idx2 = var0, idx3 = var4; idx3 == var10; idx2 += inc3, idx3 += inc4 */ ++ 0x809a601b, /* 0080(:690): LCD: idx4 = var1; ; idx4 += inc3 */ ++ 0xda9b001b, /* 0084(:693): LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */ ++ 0x9b9be01b, /* 0088(:693): LCD: idx7 = idx7; ; idx7 += inc3 */ ++ 0x0000d3a0, /* 008C(:694): DRD1A: *idx4; FN=0 init=0 WS=0 RS=0 */ ++ 0xc10420c2, /* 0090(:696): LCDEXT: idx5 = var2, idx6 = var8; idx6 < var3; idx5 += inc0, idx6 += inc2 */ ++ 0x839be009, /* 0094(:696): LCD: idx7 = var7; ; idx7 += inc1 */ ++ 0x0bfed7b8, /* 0098(:699): DRD1A: *idx7; FN=0 TFD init=31 WS=3 RS=3 */ ++ 0xda9b001b, /* 009C(:701): LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */ ++ 0x9b9be01b, /* 00A0(:701): LCD: idx7 = idx7; ; idx7 += inc3 */ ++ 0x70000006, /* 00A4(:703): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ ++ 0x088cf889, /* 00A8(:703): DRD2B1: idx2 = EU3(); EU3(idx2,var9) */ ++ 0x1000cb28, /* 00AC(:704): DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x70000006, /* 00B0(:705): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ ++ 0x088cf889, /* 00B4(:705): DRD2B1: idx2 = EU3(); EU3(idx2,var9) */ ++ 0x1000cb30, /* 00B8(:706): DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x70000006, /* 00BC(:707): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ ++ 0x088cf889, /* 00C0(:707): DRD2B1: idx2 = EU3(); EU3(idx2,var9) */ ++ 0x0000cb38, /* 00C4(:708): DRD1A: *idx2 = idx7; FN=0 init=0 WS=0 RS=0 */ ++ 0x000001f8, /* 00C8(:0): NOP */ ++ 0xc318022d, /* 00CC(:712): LCDEXT: idx0 = var6; idx0 > var8; idx0 += inc5 */ ++ 0x8018801b, /* 00D0(:712): LCD: idx1 = var0; idx1 once var0; idx1 += inc3 */ ++ 0x040001f8, /* 00D4(:713): DRD1A: FN=0 INT init=0 WS=0 RS=0 */ ++}; ++#ifdef MCD_INCLUDE_EU ++u32 MCD_ChainEu_TDT[]= ++{ ++ 0x80004000, /* 0000(:947): LCDEXT: idx0 = 0x00000000; ; */ ++ 0x8198801b, /* 0004(:947): LCD: idx1 = var3; idx1 once var0; idx1 += inc3 */ ++ 0xb8c68018, /* 0008(:948): LCD: idx2 = *(idx1 + var13); idx2 once var0; idx2 += inc3 */ ++ 0x10002f10, /* 000C(:949): DRD1A: var11 = idx2; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x7000000d, /* 0010(:950): DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT MORE init=0 WS=0 RS=0 */ ++ 0x01ccf89f, /* 0014(:950): DRD2B1: var7 = EU3(); EU3(idx2) */ ++ 0x6000000a, /* 0018(:951): DRD2A: EU0=0 EU1=0 EU2=0 EU3=10 EXT init=0 WS=0 RS=0 */ ++ 0x080cf89f, /* 001C(:951): DRD2B1: idx0 = EU3(); EU3(idx2) */ ++ 0x000001f8, /* 0020(:0): NOP */ ++ 0x981803a4, /* 0024(:955): LCD: idx0 = idx0; idx0 == var14; idx0 += inc4 */ ++ 0x8198801b, /* 0028(:957): LCD: idx1 = var3; idx1 once var0; idx1 += inc3 */ ++ 0xf8c6801a, /* 002C(:958): LCDEXT: idx2 = *(idx1 + var13 + 8); idx2 once var0; idx2 += inc3 */ ++ 0xb8c6e01b, /* 0030(:959): LCD: idx3 = *(idx1 + var13 + 12); ; idx3 += inc3 */ ++ 0x10002b10, /* 0034(:961): DRD1A: var10 = idx2; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x00001318, /* 0038(:962): DRD1A: var4 = idx3; FN=0 init=0 WS=0 RS=0 */ ++ 0xb8c6801d, /* 003C(:964): LCD: idx2 = *(idx1 + var13 + 20); idx2 once var0; idx2 += inc3 */ ++ 0x10001710, /* 0040(:965): DRD1A: var5 = idx2; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x60000007, /* 0044(:966): DRD2A: EU0=0 EU1=0 EU2=0 EU3=7 EXT init=0 WS=0 RS=0 */ ++ 0x018cf88c, /* 0048(:966): DRD2B1: var6 = EU3(); EU3(idx2,var12) */ ++ 0x98c6801c, /* 004C(:968): LCD: idx2 = idx1 + var13 + 4; idx2 once var0; idx2 += inc3 */ ++ 0x00000b10, /* 0050(:969): DRD1A: var2 = idx2; FN=0 init=0 WS=0 RS=0 */ ++ 0x98c78018, /* 0054(:970): LCD: idx2 = idx1 + var15; idx2 once var0; idx2 += inc3 */ ++ 0x10002310, /* 0058(:971): DRD1A: var8 = idx2; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x0000c820, /* 005C(:972): DRD1A: *idx2 = var4; FN=0 init=0 WS=0 RS=0 */ ++ 0x000001f8, /* 0060(:0): NOP */ ++ 0x8698801b, /* 0064(:976): LCD: idx1 = var13; idx1 once var0; idx1 += inc3 */ ++ 0x7000000f, /* 0068(:977): DRD2A: EU0=0 EU1=0 EU2=0 EU3=15 EXT MORE init=0 WS=0 RS=0 */ ++ 0x084cf2df, /* 006C(:977): DRD2B1: idx1 = EU3(); EU3(var11) */ ++ 0xd899042d, /* 0070(:978): LCDEXT: idx2 = idx1; idx2 >= var16; idx2 += inc5 */ ++ 0x8019801b, /* 0074(:978): LCD: idx3 = var0; idx3 once var0; idx3 += inc3 */ ++ 0x60000003, /* 0078(:979): DRD2A: EU0=0 EU1=0 EU2=0 EU3=3 EXT init=0 WS=0 RS=0 */ ++ 0x2cd7c7df, /* 007C(:979): DRD2B2: EU3(var13) */ ++ 0xd8990364, /* 0080(:980): LCDEXT: idx2 = idx1; idx2 == var13; idx2 += inc4 */ ++ 0x8019801b, /* 0084(:980): LCD: idx3 = var0; idx3 once var0; idx3 += inc3 */ ++ 0x60000003, /* 0088(:981): DRD2A: EU0=0 EU1=0 EU2=0 EU3=3 EXT init=0 WS=0 RS=0 */ ++ 0x2c17c7df, /* 008C(:981): DRD2B2: EU3(var1) */ ++ 0x000001f8, /* 0090(:0): NOP */ ++ 0xc1c7e018, /* 0094(:984): LCDEXT: idx1 = var3 + var15; ; idx1 += inc3 */ ++ 0xc003a35e, /* 0098(:984): LCDEXT: idx2 = var0, idx3 = var7; idx3 == var13; idx2 += inc3, idx3 += inc6 */ ++ 0x819a601b, /* 009C(:985): LCD: idx4 = var3; ; idx4 += inc3 */ ++ 0xc206a142, /* 00A0(:988): LCDEXT: idx5 = var4, idx6 = var13; idx6 < var5; idx5 += inc0, idx6 += inc2 */ ++ 0x851be009, /* 00A4(:988): LCD: idx7 = var10; ; idx7 += inc1 */ ++ 0x63fe0000, /* 00A8(:991): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=31 WS=3 RS=3 */ ++ 0x0d4cfddf, /* 00AC(:991): DRD2B1: *idx5 = EU3(); EU3(*idx7) */ ++ 0xda9b001b, /* 00B0(:993): LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */ ++ 0x9b9be01b, /* 00B4(:993): LCD: idx7 = idx7; ; idx7 += inc3 */ ++ 0x70000002, /* 00B8(:994): DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT MORE init=0 WS=0 RS=0 */ ++ 0x004cf81f, /* 00BC(:994): DRD2B1: var1 = EU3(); EU3(idx0) */ ++ 0x1000cb20, /* 00C0(:995): DRD1A: *idx2 = idx4; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x70000006, /* 00C4(:996): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ ++ 0x088cf891, /* 00C8(:996): DRD2B1: idx2 = EU3(); EU3(idx2,var17) */ ++ 0x1000cb28, /* 00CC(:997): DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x70000006, /* 00D0(:998): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ ++ 0x088cf891, /* 00D4(:998): DRD2B1: idx2 = EU3(); EU3(idx2,var17) */ ++ 0x1000cb30, /* 00D8(:999): DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x70000006, /* 00DC(:1000): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ ++ 0x088cf891, /* 00E0(:1000): DRD2B1: idx2 = EU3(); EU3(idx2,var17) */ ++ 0x1000cb38, /* 00E4(:1001): DRD1A: *idx2 = idx7; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x0000c728, /* 00E8(:1002): DRD1A: *idx1 = idx5; FN=0 init=0 WS=0 RS=0 */ ++ 0x000001f8, /* 00EC(:0): NOP */ ++ 0xc1c7e018, /* 00F0(:1006): LCDEXT: idx1 = var3 + var15; ; idx1 += inc3 */ ++ 0xc003a49e, /* 00F4(:1006): LCDEXT: idx2 = var0, idx3 = var7; idx3 == var18; idx2 += inc3, idx3 += inc6 */ ++ 0x819a601b, /* 00F8(:1007): LCD: idx4 = var3; ; idx4 += inc3 */ ++ 0xda9b001b, /* 00FC(:1010): LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */ ++ 0x9b9be01b, /* 0100(:1010): LCD: idx7 = idx7; ; idx7 += inc3 */ ++ 0x0000d3a0, /* 0104(:1011): DRD1A: *idx4; FN=0 init=0 WS=0 RS=0 */ ++ 0xc206a142, /* 0108(:1013): LCDEXT: idx5 = var4, idx6 = var13; idx6 < var5; idx5 += inc0, idx6 += inc2 */ ++ 0x851be009, /* 010C(:1013): LCD: idx7 = var10; ; idx7 += inc1 */ ++ 0x6bfe0000, /* 0110(:1016): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 TFD EXT init=31 WS=3 RS=3 */ ++ 0x0d4cfddf, /* 0114(:1016): DRD2B1: *idx5 = EU3(); EU3(*idx7) */ ++ 0xda9b001b, /* 0118(:1018): LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */ ++ 0x9b9be01b, /* 011C(:1018): LCD: idx7 = idx7; ; idx7 += inc3 */ ++ 0x70000002, /* 0120(:1019): DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT MORE init=0 WS=0 RS=0 */ ++ 0x004cf81f, /* 0124(:1019): DRD2B1: var1 = EU3(); EU3(idx0) */ ++ 0x1000cb20, /* 0128(:1020): DRD1A: *idx2 = idx4; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x70000006, /* 012C(:1021): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ ++ 0x088cf891, /* 0130(:1021): DRD2B1: idx2 = EU3(); EU3(idx2,var17) */ ++ 0x1000cb28, /* 0134(:1022): DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x70000006, /* 0138(:1023): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ ++ 0x088cf891, /* 013C(:1023): DRD2B1: idx2 = EU3(); EU3(idx2,var17) */ ++ 0x1000cb30, /* 0140(:1024): DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x70000006, /* 0144(:1025): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ ++ 0x088cf891, /* 0148(:1025): DRD2B1: idx2 = EU3(); EU3(idx2,var17) */ ++ 0x1000cb38, /* 014C(:1026): DRD1A: *idx2 = idx7; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x0000c728, /* 0150(:1027): DRD1A: *idx1 = idx5; FN=0 init=0 WS=0 RS=0 */ ++ 0x000001f8, /* 0154(:0): NOP */ ++ 0x8198801b, /* 0158(:1031): LCD: idx1 = var3; idx1 once var0; idx1 += inc3 */ ++ 0xd8c68018, /* 015C(:1033): LCDEXT: idx2 = idx1 + var13; idx2 once var0; idx2 += inc3 */ ++ 0x98c6e01c, /* 0160(:1033): LCD: idx3 = idx1 + var13 + 4; ; idx3 += inc3 */ ++ 0x6000000b, /* 0164(:1034): DRD2A: EU0=0 EU1=0 EU2=0 EU3=11 EXT init=0 WS=0 RS=0 */ ++ 0x0c8cfc9f, /* 0168(:1034): DRD2B1: *idx2 = EU3(); EU3(*idx2) */ ++ 0x0000cc08, /* 016C(:1035): DRD1A: *idx3 = var1; FN=0 init=0 WS=0 RS=0 */ ++ 0xa1c6801e, /* 0170(:1038): LCD: idx1 = *(var3 + var13 + 24); idx1 once var0; idx1 += inc3 */ ++ 0x10000f08, /* 0174(:1039): DRD1A: var3 = idx1; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x10002458, /* 0178(:1040): DRD1A: var9 = var11; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0xb8c68018, /* 017C(:1041): LCD: idx2 = *(idx1 + var13); idx2 once var0; idx2 += inc3 */ ++ 0x10002f10, /* 0180(:1042): DRD1A: var11 = idx2; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x7000000a, /* 0184(:1043): DRD2A: EU0=0 EU1=0 EU2=0 EU3=10 EXT MORE init=0 WS=0 RS=0 */ ++ 0x080cf89f, /* 0188(:1043): DRD2B1: idx0 = EU3(); EU3(idx2) */ ++ 0x6000000d, /* 018C(:1044): DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT init=0 WS=0 RS=0 */ ++ 0x01ccf89f, /* 0190(:1044): DRD2B1: var7 = EU3(); EU3(idx2) */ ++ 0x000001f8, /* 0194(:0): NOP */ ++ 0x8698801b, /* 0198(:1050): LCD: idx1 = var13; idx1 once var0; idx1 += inc3 */ ++ 0x7000000e, /* 019C(:1051): DRD2A: EU0=0 EU1=0 EU2=0 EU3=14 EXT MORE init=0 WS=0 RS=0 */ ++ 0x084cf25f, /* 01A0(:1051): DRD2B1: idx1 = EU3(); EU3(var9) */ ++ 0xd899037f, /* 01A4(:1052): LCDEXT: idx2 = idx1; idx2 > var13; idx2 += inc7 */ ++ 0x8019801b, /* 01A8(:1052): LCD: idx3 = var0; idx3 once var0; idx3 += inc3 */ ++ 0x040001f8, /* 01AC(:1053): DRD1A: FN=0 INT init=0 WS=0 RS=0 */ ++ 0x000001f8, /* 01B0(:0): NOP */ ++ 0x000001f8, /* 01B4(:0): NOP */ ++}; ++u32 MCD_SingleEu_TDT[]= ++{ ++ 0x8218001b, /* 0000(:1248): LCD: idx0 = var4; idx0 once var0; idx0 += inc3 */ ++ 0x7000000d, /* 0004(:1249): DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT MORE init=0 WS=0 RS=0 */ ++ 0x080cf81f, /* 0008(:1249): DRD2B1: idx0 = EU3(); EU3(idx0) */ ++ 0x8218801b, /* 000C(:1250): LCD: idx1 = var4; idx1 once var0; idx1 += inc3 */ ++ 0x6000000e, /* 0010(:1251): DRD2A: EU0=0 EU1=0 EU2=0 EU3=14 EXT init=0 WS=0 RS=0 */ ++ 0x084cf85f, /* 0014(:1251): DRD2B1: idx1 = EU3(); EU3(idx1) */ ++ 0x000001f8, /* 0018(:0): NOP */ ++ 0x8318001b, /* 001C(:1255): LCD: idx0 = var6; idx0 once var0; idx0 += inc3 */ ++ 0x7000000d, /* 0020(:1256): DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT MORE init=0 WS=0 RS=0 */ ++ 0x014cf81f, /* 0024(:1256): DRD2B1: var5 = EU3(); EU3(idx0) */ ++ 0x6000000e, /* 0028(:1257): DRD2A: EU0=0 EU1=0 EU2=0 EU3=14 EXT init=0 WS=0 RS=0 */ ++ 0x01ccf81f, /* 002C(:1257): DRD2B1: var7 = EU3(); EU3(idx0) */ ++ 0x8498001b, /* 0030(:1260): LCD: idx0 = var9; idx0 once var0; idx0 += inc3 */ ++ 0x7000000f, /* 0034(:1261): DRD2A: EU0=0 EU1=0 EU2=0 EU3=15 EXT MORE init=0 WS=0 RS=0 */ ++ 0x080cf19f, /* 0038(:1261): DRD2B1: idx0 = EU3(); EU3(var6) */ ++ 0xd81882a4, /* 003C(:1262): LCDEXT: idx1 = idx0; idx1 >= var10; idx1 += inc4 */ ++ 0x8019001b, /* 0040(:1262): LCD: idx2 = var0; idx2 once var0; idx2 += inc3 */ ++ 0x60000003, /* 0044(:1263): DRD2A: EU0=0 EU1=0 EU2=0 EU3=3 EXT init=0 WS=0 RS=0 */ ++ 0x2c97c7df, /* 0048(:1263): DRD2B2: EU3(var9) */ ++ 0xd818826d, /* 004C(:1264): LCDEXT: idx1 = idx0; idx1 == var9; idx1 += inc5 */ ++ 0x8019001b, /* 0050(:1264): LCD: idx2 = var0; idx2 once var0; idx2 += inc3 */ ++ 0x60000003, /* 0054(:1265): DRD2A: EU0=0 EU1=0 EU2=0 EU3=3 EXT init=0 WS=0 RS=0 */ ++ 0x2c17c7df, /* 0058(:1265): DRD2B2: EU3(var1) */ ++ 0x000001f8, /* 005C(:0): NOP */ ++ 0xc282e01b, /* 0060(:1268): LCDEXT: idx0 = var5, idx1 = var5; ; idx0 += inc3, idx1 += inc3 */ ++ 0xc002a25e, /* 0064(:1268): LCDEXT: idx2 = var0, idx3 = var5; idx3 == var9; idx2 += inc3, idx3 += inc6 */ ++ 0x811a601b, /* 0068(:1269): LCD: idx4 = var2; ; idx4 += inc3 */ ++ 0xc184a102, /* 006C(:1272): LCDEXT: idx5 = var3, idx6 = var9; idx6 < var4; idx5 += inc0, idx6 += inc2 */ ++ 0x841be009, /* 0070(:1272): LCD: idx7 = var8; ; idx7 += inc1 */ ++ 0x63fe0000, /* 0074(:1275): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=31 WS=3 RS=3 */ ++ 0x0d4cfddf, /* 0078(:1275): DRD2B1: *idx5 = EU3(); EU3(*idx7) */ ++ 0xda9b001b, /* 007C(:1277): LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */ ++ 0x9b9be01b, /* 0080(:1277): LCD: idx7 = idx7; ; idx7 += inc3 */ ++ 0x70000002, /* 0084(:1279): DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT MORE init=0 WS=0 RS=0 */ ++ 0x004cf99f, /* 0088(:1279): DRD2B1: var1 = EU3(); EU3(idx6) */ ++ 0x70000006, /* 008C(:1280): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ ++ 0x088cf88b, /* 0090(:1280): DRD2B1: idx2 = EU3(); EU3(idx2,var11) */ ++ 0x1000cb28, /* 0094(:1281): DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x70000006, /* 0098(:1282): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ ++ 0x088cf88b, /* 009C(:1282): DRD2B1: idx2 = EU3(); EU3(idx2,var11) */ ++ 0x1000cb30, /* 00A0(:1283): DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x70000006, /* 00A4(:1284): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ ++ 0x088cf88b, /* 00A8(:1284): DRD2B1: idx2 = EU3(); EU3(idx2,var11) */ ++ 0x0000cb38, /* 00AC(:1285): DRD1A: *idx2 = idx7; FN=0 init=0 WS=0 RS=0 */ ++ 0x000001f8, /* 00B0(:0): NOP */ ++ 0xc282e01b, /* 00B4(:1289): LCDEXT: idx0 = var5, idx1 = var5; ; idx0 += inc3, idx1 += inc3 */ ++ 0xc002a31e, /* 00B8(:1289): LCDEXT: idx2 = var0, idx3 = var5; idx3 == var12; idx2 += inc3, idx3 += inc6 */ ++ 0x811a601b, /* 00BC(:1290): LCD: idx4 = var2; ; idx4 += inc3 */ ++ 0xda9b001b, /* 00C0(:1293): LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */ ++ 0x9b9be01b, /* 00C4(:1293): LCD: idx7 = idx7; ; idx7 += inc3 */ ++ 0x0000d3a0, /* 00C8(:1294): DRD1A: *idx4; FN=0 init=0 WS=0 RS=0 */ ++ 0xc184a102, /* 00CC(:1296): LCDEXT: idx5 = var3, idx6 = var9; idx6 < var4; idx5 += inc0, idx6 += inc2 */ ++ 0x841be009, /* 00D0(:1296): LCD: idx7 = var8; ; idx7 += inc1 */ ++ 0x6bfe0000, /* 00D4(:1299): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 TFD EXT init=31 WS=3 RS=3 */ ++ 0x0d4cfddf, /* 00D8(:1299): DRD2B1: *idx5 = EU3(); EU3(*idx7) */ ++ 0xda9b001b, /* 00DC(:1301): LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */ ++ 0x9b9be01b, /* 00E0(:1301): LCD: idx7 = idx7; ; idx7 += inc3 */ ++ 0x70000002, /* 00E4(:1303): DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT MORE init=0 WS=0 RS=0 */ ++ 0x004cf99f, /* 00E8(:1303): DRD2B1: var1 = EU3(); EU3(idx6) */ ++ 0x70000006, /* 00EC(:1304): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ ++ 0x088cf88b, /* 00F0(:1304): DRD2B1: idx2 = EU3(); EU3(idx2,var11) */ ++ 0x1000cb28, /* 00F4(:1305): DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x70000006, /* 00F8(:1306): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ ++ 0x088cf88b, /* 00FC(:1306): DRD2B1: idx2 = EU3(); EU3(idx2,var11) */ ++ 0x1000cb30, /* 0100(:1307): DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x70000006, /* 0104(:1308): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ ++ 0x088cf88b, /* 0108(:1308): DRD2B1: idx2 = EU3(); EU3(idx2,var11) */ ++ 0x0000cb38, /* 010C(:1309): DRD1A: *idx2 = idx7; FN=0 init=0 WS=0 RS=0 */ ++ 0x000001f8, /* 0110(:0): NOP */ ++ 0x8144801c, /* 0114(:1312): LCD: idx0 = var2 + var9 + 4; idx0 once var0; idx0 += inc3 */ ++ 0x0000c008, /* 0118(:1313): DRD1A: *idx0 = var1; FN=0 init=0 WS=0 RS=0 */ ++ 0xc398027f, /* 011C(:1315): LCDEXT: idx0 = var7; idx0 > var9; idx0 += inc7 */ ++ 0x8018801b, /* 0120(:1315): LCD: idx1 = var0; idx1 once var0; idx1 += inc3 */ ++ 0x040001f8, /* 0124(:1316): DRD1A: FN=0 INT init=0 WS=0 RS=0 */ ++}; ++#endif ++u32 MCD_ENetRcv_TDT[]= ++{ ++ 0x80004000, /* 0000(:1389): LCDEXT: idx0 = 0x00000000; ; */ ++ 0x81988000, /* 0004(:1389): LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */ ++ 0x10000788, /* 0008(:1390): DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x6000000a, /* 000C(:1391): DRD2A: EU0=0 EU1=0 EU2=0 EU3=10 EXT init=0 WS=0 RS=0 */ ++ 0x080cf05f, /* 0010(:1391): DRD2B1: idx0 = EU3(); EU3(var1) */ ++ 0x98180209, /* 0014(:1394): LCD: idx0 = idx0; idx0 != var8; idx0 += inc1 */ ++ 0x81c40004, /* 0018(:1396): LCD: idx1 = var3 + var8 + 4; idx1 once var0; idx1 += inc0 */ ++ 0x7000000e, /* 001C(:1397): DRD2A: EU0=0 EU1=0 EU2=0 EU3=14 EXT MORE init=0 WS=0 RS=0 */ ++ 0x010cf05f, /* 0020(:1397): DRD2B1: var4 = EU3(); EU3(var1) */ ++ 0x7000000c, /* 0024(:1398): DRD2A: EU0=0 EU1=0 EU2=0 EU3=12 EXT MORE init=0 WS=0 RS=0 */ ++ 0x01ccf05f, /* 0028(:1398): DRD2B1: var7 = EU3(); EU3(var1) */ ++ 0x70000004, /* 002C(:1399): DRD2A: EU0=0 EU1=0 EU2=0 EU3=4 EXT MORE init=0 WS=0 RS=0 */ ++ 0x014cf049, /* 0030(:1399): DRD2B1: var5 = EU3(); EU3(var1,var9) */ ++ 0x70000004, /* 0034(:1400): DRD2A: EU0=0 EU1=0 EU2=0 EU3=4 EXT MORE init=0 WS=0 RS=0 */ ++ 0x004cf04a, /* 0038(:1400): DRD2B1: var1 = EU3(); EU3(var1,var10) */ ++ 0x00000b88, /* 003C(:1403): DRD1A: var2 = *idx1; FN=0 init=0 WS=0 RS=0 */ ++ 0xc4030150, /* 0040(:1406): LCDEXT: idx1 = var8, idx2 = var6; idx1 < var5; idx1 += inc2, idx2 += inc0 */ ++ 0x8119e012, /* 0044(:1406): LCD: idx3 = var2; ; idx3 += inc2 */ ++ 0x03e0cf90, /* 0048(:1409): DRD1A: *idx3 = *idx2; FN=0 init=31 WS=0 RS=0 */ ++ 0x81188000, /* 004C(:1412): LCD: idx1 = var2; idx1 once var0; idx1 += inc0 */ ++ 0x000ac788, /* 0050(:1413): DRD1A: *idx1 = *idx1; FN=0 init=0 WS=1 RS=1 */ ++ 0xc4030000, /* 0054(:1415): LCDEXT: idx1 = var8, idx2 = var6; idx1 once var0; idx1 += inc0, idx2 += inc0 */ ++ 0x8199e000, /* 0058(:1415): LCD: idx3 = var3; ; idx3 += inc0 */ ++ 0x63e00004, /* 005C(:1418): DRD2A: EU0=0 EU1=0 EU2=0 EU3=4 EXT init=31 WS=0 RS=0 */ ++ 0x084cfc8b, /* 0060(:1418): DRD2B1: idx1 = EU3(); EU3(*idx2,var11) */ ++ 0xd8990000, /* 0064(:1421): LCDEXT: idx1 = idx1, idx2 = idx2; idx1 once var0; idx1 += inc0, idx2 += inc0 */ ++ 0x9999e000, /* 0068(:1421): LCD: idx3 = idx3; ; idx3 += inc0 */ ++ 0x60000005, /* 006C(:1422): DRD2A: EU0=0 EU1=0 EU2=0 EU3=5 EXT init=0 WS=0 RS=0 */ ++ 0x0cccf841, /* 0070(:1422): DRD2B1: *idx3 = EU3(); EU3(idx1,var1) */ ++ 0x81c60000, /* 0074(:1427): LCD: idx1 = var3 + var12; idx1 once var0; idx1 += inc0 */ ++ 0xc399021b, /* 0078(:1429): LCDEXT: idx2 = var7; idx2 > var8; idx2 += inc3 */ ++ 0x80198000, /* 007C(:1429): LCD: idx3 = var0; idx3 once var0; idx3 += inc0 */ ++ 0x00008400, /* 0080(:1430): DRD1A: idx1 = var0; FN=0 init=0 WS=0 RS=0 */ ++ 0x00000f08, /* 0084(:1431): DRD1A: var3 = idx1; FN=0 init=0 WS=0 RS=0 */ ++ 0x81988000, /* 0088(:1434): LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */ ++ 0x10000788, /* 008C(:1435): DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x6000000a, /* 0090(:1436): DRD2A: EU0=0 EU1=0 EU2=0 EU3=10 EXT init=0 WS=0 RS=0 */ ++ 0x080cf05f, /* 0094(:1436): DRD2B1: idx0 = EU3(); EU3(var1) */ ++ 0xc2188209, /* 0098(:1439): LCDEXT: idx1 = var4; idx1 != var8; idx1 += inc1 */ ++ 0x80190000, /* 009C(:1439): LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */ ++ 0x040001f8, /* 00A0(:1440): DRD1A: FN=0 INT init=0 WS=0 RS=0 */ ++ 0x000001f8, /* 00A4(:0): NOP */ ++}; ++u32 MCD_ENetXmit_TDT[]= ++{ ++ 0x80004000, /* 0000(:1515): LCDEXT: idx0 = 0x00000000; ; */ ++ 0x81988000, /* 0004(:1515): LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */ ++ 0x10000788, /* 0008(:1516): DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x6000000a, /* 000C(:1517): DRD2A: EU0=0 EU1=0 EU2=0 EU3=10 EXT init=0 WS=0 RS=0 */ ++ 0x080cf05f, /* 0010(:1517): DRD2B1: idx0 = EU3(); EU3(var1) */ ++ 0x98180309, /* 0014(:1520): LCD: idx0 = idx0; idx0 != var12; idx0 += inc1 */ ++ 0x80004003, /* 0018(:1522): LCDEXT: idx1 = 0x00000003; ; */ ++ 0x81c60004, /* 001C(:1522): LCD: idx2 = var3 + var12 + 4; idx2 once var0; idx2 += inc0 */ ++ 0x7000000e, /* 0020(:1523): DRD2A: EU0=0 EU1=0 EU2=0 EU3=14 EXT MORE init=0 WS=0 RS=0 */ ++ 0x014cf05f, /* 0024(:1523): DRD2B1: var5 = EU3(); EU3(var1) */ ++ 0x7000000c, /* 0028(:1524): DRD2A: EU0=0 EU1=0 EU2=0 EU3=12 EXT MORE init=0 WS=0 RS=0 */ ++ 0x028cf05f, /* 002C(:1524): DRD2B1: var10 = EU3(); EU3(var1) */ ++ 0x7000000d, /* 0030(:1525): DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT MORE init=0 WS=0 RS=0 */ ++ 0x018cf05f, /* 0034(:1525): DRD2B1: var6 = EU3(); EU3(var1) */ ++ 0x70000004, /* 0038(:1526): DRD2A: EU0=0 EU1=0 EU2=0 EU3=4 EXT MORE init=0 WS=0 RS=0 */ ++ 0x01ccf04d, /* 003C(:1526): DRD2B1: var7 = EU3(); EU3(var1,var13) */ ++ 0x10000b90, /* 0040(:1527): DRD1A: var2 = *idx2; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x60000004, /* 0044(:1528): DRD2A: EU0=0 EU1=0 EU2=0 EU3=4 EXT init=0 WS=0 RS=0 */ ++ 0x020cf0a1, /* 0048(:1528): DRD2B1: var8 = EU3(); EU3(var2,idx1) */ ++ 0xc3188312, /* 004C(:1531): LCDEXT: idx1 = var6; idx1 > var12; idx1 += inc2 */ ++ 0x83c70000, /* 0050(:1531): LCD: idx2 = var7 + var14; idx2 once var0; idx2 += inc0 */ ++ 0x00001f10, /* 0054(:1532): DRD1A: var7 = idx2; FN=0 init=0 WS=0 RS=0 */ ++ 0xc583a3c3, /* 0058(:1534): LCDEXT: idx1 = var11, idx2 = var7; idx2 >= var15; idx1 += inc0, idx2 += inc3 */ ++ 0x81042325, /* 005C(:1534): LCD: idx3 = var2, idx4 = var8; idx4 == var12; idx3 += inc4, idx4 += inc5 */ ++ 0x03e0c798, /* 0060(:1539): DRD1A: *idx1 = *idx3; FN=0 init=31 WS=0 RS=0 */ ++ 0xd8990000, /* 0064(:1542): LCDEXT: idx1 = idx1, idx2 = idx2; idx1 once var0; idx1 += inc0, idx2 += inc0 */ ++ 0x9999e000, /* 0068(:1542): LCD: idx3 = idx3; ; idx3 += inc0 */ ++ 0x000acf98, /* 006C(:1543): DRD1A: *idx3 = *idx3; FN=0 init=0 WS=1 RS=1 */ ++ 0xd8992306, /* 0070(:1545): LCDEXT: idx1 = idx1, idx2 = idx2; idx2 > var12; idx1 += inc0, idx2 += inc6 */ ++ 0x9999e03f, /* 0074(:1545): LCD: idx3 = idx3; ; idx3 += inc7 */ ++ 0x03eac798, /* 0078(:1548): DRD1A: *idx1 = *idx3; FN=0 init=31 WS=1 RS=1 */ ++ 0xd8990000, /* 007C(:1551): LCDEXT: idx1 = idx1, idx2 = idx2; idx1 once var0; idx1 += inc0, idx2 += inc0 */ ++ 0x9999e000, /* 0080(:1551): LCD: idx3 = idx3; ; idx3 += inc0 */ ++ 0x000acf98, /* 0084(:1552): DRD1A: *idx3 = *idx3; FN=0 init=0 WS=1 RS=1 */ ++ 0xd8990000, /* 0088(:1554): LCDEXT: idx1 = idx1, idx2 = idx2; idx1 once var0; idx1 += inc0, idx2 += inc0 */ ++ 0x99832302, /* 008C(:1554): LCD: idx3 = idx3, idx4 = var6; idx4 > var12; idx3 += inc0, idx4 += inc2 */ ++ 0x0beac798, /* 0090(:1557): DRD1A: *idx1 = *idx3; FN=0 TFD init=31 WS=1 RS=1 */ ++ 0x81988000, /* 0094(:1559): LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */ ++ 0x6000000b, /* 0098(:1560): DRD2A: EU0=0 EU1=0 EU2=0 EU3=11 EXT init=0 WS=0 RS=0 */ ++ 0x0c4cfc5f, /* 009C(:1560): DRD2B1: *idx1 = EU3(); EU3(*idx1) */ ++ 0x81c80000, /* 00A0(:1562): LCD: idx1 = var3 + var16; idx1 once var0; idx1 += inc0 */ ++ 0xc5190312, /* 00A4(:1564): LCDEXT: idx2 = var10; idx2 > var12; idx2 += inc2 */ ++ 0x80198000, /* 00A8(:1564): LCD: idx3 = var0; idx3 once var0; idx3 += inc0 */ ++ 0x00008400, /* 00AC(:1565): DRD1A: idx1 = var0; FN=0 init=0 WS=0 RS=0 */ ++ 0x00000f08, /* 00B0(:1566): DRD1A: var3 = idx1; FN=0 init=0 WS=0 RS=0 */ ++ 0x81988000, /* 00B4(:1569): LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */ ++ 0x10000788, /* 00B8(:1570): DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */ ++ 0x6000000a, /* 00BC(:1571): DRD2A: EU0=0 EU1=0 EU2=0 EU3=10 EXT init=0 WS=0 RS=0 */ ++ 0x080cf05f, /* 00C0(:1571): DRD2B1: idx0 = EU3(); EU3(var1) */ ++ 0xc2988309, /* 00C4(:1574): LCDEXT: idx1 = var5; idx1 != var12; idx1 += inc1 */ ++ 0x80190000, /* 00C8(:1574): LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */ ++ 0x040001f8, /* 00CC(:1575): DRD1A: FN=0 INT init=0 WS=0 RS=0 */ ++ 0x000001f8, /* 00D0(:0): NOP */ ++}; ++ ++#ifdef MCD_INCLUDE_EU ++MCD_bufDesc MCD_singleBufDescs[NCHANNELS]; ++#endif +--- /dev/null ++++ b/drivers/dma/MCD_tasksInit.c +@@ -0,0 +1,238 @@ ++/* ++ * drivers/dma/MCD_tasksInit.c ++ * ++ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. ++ * Kurt Mahan <kmahan@freescale.com> ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++/* ++ * Autogenerated - Do not edit! ++ */ ++ ++#include "MCD_dma.h" ++ ++extern dmaRegs *MCD_dmaBar; ++ ++ ++/* ++ * Task 0 ++ */ ++ ++void MCD_startDmaChainNoEu(int *currBD, short srcIncr, short destIncr, int xferSize, short xferSizeIncr, int *cSave, volatile TaskTableEntry *taskTable, int channel) ++{ ++ ++ MCD_SET_VAR(taskTable+channel, 2, (u32)currBD); /* var[2] */ ++ MCD_SET_VAR(taskTable+channel, 25, (u32)(0xe000 << 16) | (0xffff & srcIncr)); /* inc[1] */ ++ MCD_SET_VAR(taskTable+channel, 24, (u32)(0xe000 << 16) | (0xffff & destIncr)); /* inc[0] */ ++ MCD_SET_VAR(taskTable+channel, 11, (u32)xferSize); /* var[11] */ ++ MCD_SET_VAR(taskTable+channel, 26, (u32)(0x2000 << 16) | (0xffff & xferSizeIncr)); /* inc[2] */ ++ MCD_SET_VAR(taskTable+channel, 0, (u32)cSave); /* var[0] */ ++ MCD_SET_VAR(taskTable+channel, 1, (u32)0x00000000); /* var[1] */ ++ MCD_SET_VAR(taskTable+channel, 3, (u32)0x00000000); /* var[3] */ ++ MCD_SET_VAR(taskTable+channel, 4, (u32)0x00000000); /* var[4] */ ++ MCD_SET_VAR(taskTable+channel, 5, (u32)0x00000000); /* var[5] */ ++ MCD_SET_VAR(taskTable+channel, 6, (u32)0x00000000); /* var[6] */ ++ MCD_SET_VAR(taskTable+channel, 7, (u32)0x00000000); /* var[7] */ ++ MCD_SET_VAR(taskTable+channel, 8, (u32)0x00000000); /* var[8] */ ++ MCD_SET_VAR(taskTable+channel, 9, (u32)0x00000000); /* var[9] */ ++ MCD_SET_VAR(taskTable+channel, 10, (u32)0x00000000); /* var[10] */ ++ MCD_SET_VAR(taskTable+channel, 12, (u32)0x00000000); /* var[12] */ ++ MCD_SET_VAR(taskTable+channel, 13, (u32)0x80000000); /* var[13] */ ++ MCD_SET_VAR(taskTable+channel, 14, (u32)0x00000010); /* var[14] */ ++ MCD_SET_VAR(taskTable+channel, 15, (u32)0x00000004); /* var[15] */ ++ MCD_SET_VAR(taskTable+channel, 16, (u32)0x08000000); /* var[16] */ ++ MCD_SET_VAR(taskTable+channel, 27, (u32)0x00000000); /* inc[3] */ ++ MCD_SET_VAR(taskTable+channel, 28, (u32)0x80000000); /* inc[4] */ ++ MCD_SET_VAR(taskTable+channel, 29, (u32)0x80000001); /* inc[5] */ ++ MCD_SET_VAR(taskTable+channel, 30, (u32)0x40000000); /* inc[6] */ ++ ++ /* Set the task's Enable bit in its Task Control Register */ ++ MCD_dmaBar->taskControl[channel] |= (u16)0x8000; ++} ++ ++ ++/* ++ * Task 1 ++ */ ++ ++void MCD_startDmaSingleNoEu(char *srcAddr, short srcIncr, char *destAddr, short destIncr, int dmaSize, short xferSizeIncr, int flags, int *currBD, int *cSave, volatile TaskTableEntry *taskTable, int channel) ++{ ++ ++ MCD_SET_VAR(taskTable+channel, 7, (u32)srcAddr); /* var[7] */ ++ MCD_SET_VAR(taskTable+channel, 25, (u32)(0xe000 << 16) | (0xffff & srcIncr)); /* inc[1] */ ++ MCD_SET_VAR(taskTable+channel, 2, (u32)destAddr); /* var[2] */ ++ MCD_SET_VAR(taskTable+channel, 24, (u32)(0xe000 << 16) | (0xffff & destIncr)); /* inc[0] */ ++ MCD_SET_VAR(taskTable+channel, 3, (u32)dmaSize); /* var[3] */ ++ MCD_SET_VAR(taskTable+channel, 26, (u32)(0x2000 << 16) | (0xffff & xferSizeIncr)); /* inc[2] */ ++ MCD_SET_VAR(taskTable+channel, 5, (u32)flags); /* var[5] */ ++ MCD_SET_VAR(taskTable+channel, 1, (u32)currBD); /* var[1] */ ++ MCD_SET_VAR(taskTable+channel, 0, (u32)cSave); /* var[0] */ ++ MCD_SET_VAR(taskTable+channel, 4, (u32)0x00000000); /* var[4] */ ++ MCD_SET_VAR(taskTable+channel, 6, (u32)0x00000000); /* var[6] */ ++ MCD_SET_VAR(taskTable+channel, 8, (u32)0x00000000); /* var[8] */ ++ MCD_SET_VAR(taskTable+channel, 9, (u32)0x00000004); /* var[9] */ ++ MCD_SET_VAR(taskTable+channel, 10, (u32)0x08000000); /* var[10] */ ++ MCD_SET_VAR(taskTable+channel, 27, (u32)0x00000000); /* inc[3] */ ++ MCD_SET_VAR(taskTable+channel, 28, (u32)0x80000001); /* inc[4] */ ++ MCD_SET_VAR(taskTable+channel, 29, (u32)0x40000000); /* inc[5] */ ++ ++ /* Set the task's Enable bit in its Task Control Register */ ++ MCD_dmaBar->taskControl[channel] |= (u16)0x8000; ++} ++ ++ ++/* ++ * Task 2 ++ */ ++ ++void MCD_startDmaChainEu(int *currBD, short srcIncr, short destIncr, int xferSize, short xferSizeIncr, int *cSave, volatile TaskTableEntry *taskTable, int channel) ++{ ++ ++ MCD_SET_VAR(taskTable+channel, 3, (u32)currBD); /* var[3] */ ++ MCD_SET_VAR(taskTable+channel, 25, (u32)(0xe000 << 16) | (0xffff & srcIncr)); /* inc[1] */ ++ MCD_SET_VAR(taskTable+channel, 24, (u32)(0xe000 << 16) | (0xffff & destIncr)); /* inc[0] */ ++ MCD_SET_VAR(taskTable+channel, 12, (u32)xferSize); /* var[12] */ ++ MCD_SET_VAR(taskTable+channel, 26, (u32)(0x2000 << 16) | (0xffff & xferSizeIncr)); /* inc[2] */ ++ MCD_SET_VAR(taskTable+channel, 0, (u32)cSave); /* var[0] */ ++ MCD_SET_VAR(taskTable+channel, 1, (u32)0x00000000); /* var[1] */ ++ MCD_SET_VAR(taskTable+channel, 2, (u32)0x00000000); /* var[2] */ ++ MCD_SET_VAR(taskTable+channel, 4, (u32)0x00000000); /* var[4] */ ++ MCD_SET_VAR(taskTable+channel, 5, (u32)0x00000000); /* var[5] */ ++ MCD_SET_VAR(taskTable+channel, 6, (u32)0x00000000); /* var[6] */ ++ MCD_SET_VAR(taskTable+channel, 7, (u32)0x00000000); /* var[7] */ ++ MCD_SET_VAR(taskTable+channel, 8, (u32)0x00000000); /* var[8] */ ++ MCD_SET_VAR(taskTable+channel, 9, (u32)0x00000000); /* var[9] */ ++ MCD_SET_VAR(taskTable+channel, 10, (u32)0x00000000); /* var[10] */ ++ MCD_SET_VAR(taskTable+channel, 11, (u32)0x00000000); /* var[11] */ ++ MCD_SET_VAR(taskTable+channel, 13, (u32)0x00000000); /* var[13] */ ++ MCD_SET_VAR(taskTable+channel, 14, (u32)0x80000000); /* var[14] */ ++ MCD_SET_VAR(taskTable+channel, 15, (u32)0x00000010); /* var[15] */ ++ MCD_SET_VAR(taskTable+channel, 16, (u32)0x00000001); /* var[16] */ ++ MCD_SET_VAR(taskTable+channel, 17, (u32)0x00000004); /* var[17] */ ++ MCD_SET_VAR(taskTable+channel, 18, (u32)0x08000000); /* var[18] */ ++ MCD_SET_VAR(taskTable+channel, 27, (u32)0x00000000); /* inc[3] */ ++ MCD_SET_VAR(taskTable+channel, 28, (u32)0x80000000); /* inc[4] */ ++ MCD_SET_VAR(taskTable+channel, 29, (u32)0xc0000000); /* inc[5] */ ++ MCD_SET_VAR(taskTable+channel, 30, (u32)0x80000001); /* inc[6] */ ++ MCD_SET_VAR(taskTable+channel, 31, (u32)0x40000000); /* inc[7] */ ++ ++ /* Set the task's Enable bit in its Task Control Register */ ++ MCD_dmaBar->taskControl[channel] |= (u16)0x8000; ++} ++ ++ ++/* ++ * Task 3 ++ */ ++ ++void MCD_startDmaSingleEu(char *srcAddr, short srcIncr, char *destAddr, short destIncr, int dmaSize, short xferSizeIncr, int flags, int *currBD, int *cSave, volatile TaskTableEntry *taskTable, int channel) ++{ ++ ++ MCD_SET_VAR(taskTable+channel, 8, (u32)srcAddr); /* var[8] */ ++ MCD_SET_VAR(taskTable+channel, 25, (u32)(0xe000 << 16) | (0xffff & srcIncr)); /* inc[1] */ ++ MCD_SET_VAR(taskTable+channel, 3, (u32)destAddr); /* var[3] */ ++ MCD_SET_VAR(taskTable+channel, 24, (u32)(0xe000 << 16) | (0xffff & destIncr)); /* inc[0] */ ++ MCD_SET_VAR(taskTable+channel, 4, (u32)dmaSize); /* var[4] */ ++ MCD_SET_VAR(taskTable+channel, 26, (u32)(0x2000 << 16) | (0xffff & xferSizeIncr)); /* inc[2] */ ++ MCD_SET_VAR(taskTable+channel, 6, (u32)flags); /* var[6] */ ++ MCD_SET_VAR(taskTable+channel, 2, (u32)currBD); /* var[2] */ ++ MCD_SET_VAR(taskTable+channel, 0, (u32)cSave); /* var[0] */ ++ MCD_SET_VAR(taskTable+channel, 1, (u32)0x00000000); /* var[1] */ ++ MCD_SET_VAR(taskTable+channel, 5, (u32)0x00000000); /* var[5] */ ++ MCD_SET_VAR(taskTable+channel, 7, (u32)0x00000000); /* var[7] */ ++ MCD_SET_VAR(taskTable+channel, 9, (u32)0x00000000); /* var[9] */ ++ MCD_SET_VAR(taskTable+channel, 10, (u32)0x00000001); /* var[10] */ ++ MCD_SET_VAR(taskTable+channel, 11, (u32)0x00000004); /* var[11] */ ++ MCD_SET_VAR(taskTable+channel, 12, (u32)0x08000000); /* var[12] */ ++ MCD_SET_VAR(taskTable+channel, 27, (u32)0x00000000); /* inc[3] */ ++ MCD_SET_VAR(taskTable+channel, 28, (u32)0xc0000000); /* inc[4] */ ++ MCD_SET_VAR(taskTable+channel, 29, (u32)0x80000000); /* inc[5] */ ++ MCD_SET_VAR(taskTable+channel, 30, (u32)0x80000001); /* inc[6] */ ++ MCD_SET_VAR(taskTable+channel, 31, (u32)0x40000000); /* inc[7] */ ++ ++ /* Set the task's Enable bit in its Task Control Register */ ++ MCD_dmaBar->taskControl[channel] |= (u16)0x8000; ++} ++ ++ ++/* ++ * Task 4 ++ */ ++ ++void MCD_startDmaENetRcv(char *bDBase, char *currBD, char *rcvFifoPtr, volatile TaskTableEntry *taskTable, int channel) ++{ ++ ++ MCD_SET_VAR(taskTable+channel, 0, (u32)bDBase); /* var[0] */ ++ MCD_SET_VAR(taskTable+channel, 3, (u32)currBD); /* var[3] */ ++ MCD_SET_VAR(taskTable+channel, 6, (u32)rcvFifoPtr); /* var[6] */ ++ MCD_SET_VAR(taskTable+channel, 1, (u32)0x00000000); /* var[1] */ ++ MCD_SET_VAR(taskTable+channel, 2, (u32)0x00000000); /* var[2] */ ++ MCD_SET_VAR(taskTable+channel, 4, (u32)0x00000000); /* var[4] */ ++ MCD_SET_VAR(taskTable+channel, 5, (u32)0x00000000); /* var[5] */ ++ MCD_SET_VAR(taskTable+channel, 7, (u32)0x00000000); /* var[7] */ ++ MCD_SET_VAR(taskTable+channel, 8, (u32)0x00000000); /* var[8] */ ++ MCD_SET_VAR(taskTable+channel, 9, (u32)0x0000ffff); /* var[9] */ ++ MCD_SET_VAR(taskTable+channel, 10, (u32)0x30000000); /* var[10] */ ++ MCD_SET_VAR(taskTable+channel, 11, (u32)0x0fffffff); /* var[11] */ ++ MCD_SET_VAR(taskTable+channel, 12, (u32)0x00000008); /* var[12] */ ++ MCD_SET_VAR(taskTable+channel, 24, (u32)0x00000000); /* inc[0] */ ++ MCD_SET_VAR(taskTable+channel, 25, (u32)0x60000000); /* inc[1] */ ++ MCD_SET_VAR(taskTable+channel, 26, (u32)0x20000004); /* inc[2] */ ++ MCD_SET_VAR(taskTable+channel, 27, (u32)0x40000000); /* inc[3] */ ++ ++ /* Set the task's Enable bit in its Task Control Register */ ++ MCD_dmaBar->taskControl[channel] |= (u16)0x8000; ++} ++ ++ ++/* ++ * Task 5 ++ */ ++ ++void MCD_startDmaENetXmit(char *bDBase, char *currBD, char *xmitFifoPtr, volatile TaskTableEntry *taskTable, int channel) ++{ ++ ++ MCD_SET_VAR(taskTable+channel, 0, (u32)bDBase); /* var[0] */ ++ MCD_SET_VAR(taskTable+channel, 3, (u32)currBD); /* var[3] */ ++ MCD_SET_VAR(taskTable+channel, 11, (u32)xmitFifoPtr); /* var[11] */ ++ MCD_SET_VAR(taskTable+channel, 1, (u32)0x00000000); /* var[1] */ ++ MCD_SET_VAR(taskTable+channel, 2, (u32)0x00000000); /* var[2] */ ++ MCD_SET_VAR(taskTable+channel, 4, (u32)0x00000000); /* var[4] */ ++ MCD_SET_VAR(taskTable+channel, 5, (u32)0x00000000); /* var[5] */ ++ MCD_SET_VAR(taskTable+channel, 6, (u32)0x00000000); /* var[6] */ ++ MCD_SET_VAR(taskTable+channel, 7, (u32)0x00000000); /* var[7] */ ++ MCD_SET_VAR(taskTable+channel, 8, (u32)0x00000000); /* var[8] */ ++ MCD_SET_VAR(taskTable+channel, 9, (u32)0x00000000); /* var[9] */ ++ MCD_SET_VAR(taskTable+channel, 10, (u32)0x00000000); /* var[10] */ ++ MCD_SET_VAR(taskTable+channel, 12, (u32)0x00000000); /* var[12] */ ++ MCD_SET_VAR(taskTable+channel, 13, (u32)0x0000ffff); /* var[13] */ ++ MCD_SET_VAR(taskTable+channel, 14, (u32)0xffffffff); /* var[14] */ ++ MCD_SET_VAR(taskTable+channel, 15, (u32)0x00000004); /* var[15] */ ++ MCD_SET_VAR(taskTable+channel, 16, (u32)0x00000008); /* var[16] */ ++ MCD_SET_VAR(taskTable+channel, 24, (u32)0x00000000); /* inc[0] */ ++ MCD_SET_VAR(taskTable+channel, 25, (u32)0x60000000); /* inc[1] */ ++ MCD_SET_VAR(taskTable+channel, 26, (u32)0x40000000); /* inc[2] */ ++ MCD_SET_VAR(taskTable+channel, 27, (u32)0xc000fffc); /* inc[3] */ ++ MCD_SET_VAR(taskTable+channel, 28, (u32)0xe0000004); /* inc[4] */ ++ MCD_SET_VAR(taskTable+channel, 29, (u32)0x80000000); /* inc[5] */ ++ MCD_SET_VAR(taskTable+channel, 30, (u32)0x4000ffff); /* inc[6] */ ++ MCD_SET_VAR(taskTable+channel, 31, (u32)0xe0000001); /* inc[7] */ ++ ++ /* Set the task's Enable bit in its Task Control Register */ ++ MCD_dmaBar->taskControl[channel] |= (u16)0x8000; ++} +--- /dev/null ++++ b/drivers/dma/MCD_tasksInit.h +@@ -0,0 +1,64 @@ ++/* ++ * drivers/dma/MCD_tasksInit.h ++ * ++ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. ++ * Kurt Mahan <kmahan@freescale.com> ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++#ifndef MCD_TSK_INIT_H ++#define MCD_TSK_INIT_H 1 ++ ++/* ++ * Autogenerated - Do not edit! ++ */ ++ ++/* ++ * Task 0 ++ */ ++void MCD_startDmaChainNoEu(int *currBD, short srcIncr, short destIncr, int xferSize, short xferSizeIncr, int *cSave, volatile TaskTableEntry *taskTable, int channel); ++ ++ ++/* ++ * Task 1 ++ */ ++void MCD_startDmaSingleNoEu(char *srcAddr, short srcIncr, char *destAddr, short destIncr, int dmaSize, short xferSizeIncr, int flags, int *currBD, int *cSave, volatile TaskTableEntry *taskTable, int channel); ++ ++ ++/* ++ * Task 2 ++ */ ++void MCD_startDmaChainEu(int *currBD, short srcIncr, short destIncr, int xferSize, short xferSizeIncr, int *cSave, volatile TaskTableEntry *taskTable, int channel); ++ ++ ++/* ++ * Task 3 ++ */ ++void MCD_startDmaSingleEu(char *srcAddr, short srcIncr, char *destAddr, short destIncr, int dmaSize, short xferSizeIncr, int flags, int *currBD, int *cSave, volatile TaskTableEntry *taskTable, int channel); ++ ++ ++/* ++ * Task 4 ++ */ ++void MCD_startDmaENetRcv(char *bDBase, char *currBD, char *rcvFifoPtr, volatile TaskTableEntry *taskTable, int channel); ++ ++ ++/* ++ * Task 5 ++ */ ++void MCD_startDmaENetXmit(char *bDBase, char *currBD, char *xmitFifoPtr, volatile TaskTableEntry *taskTable, int channel); ++ ++#endif /* MCD_TSK_INIT_H */ +--- /dev/null ++++ b/drivers/i2c/busses/i2c-algo-mcf.h +@@ -0,0 +1,23 @@ ++#ifndef I2C_ALGO_MCF_H ++#define I2C_ALGO_MCF_H 1 ++ ++/* --- Defines for pcf-adapters --------------------------------------- */ ++#include <linux/i2c.h> ++ ++struct i2c_algo_mcf_data { ++ void *data; /* private data for lolevel routines */ ++ void (*setmcf) (void *data, int ctl, int val); ++ int (*getmcf) (void *data, int ctl); ++ int (*getown) (void *data); ++ int (*getclock) (void *data); ++ void (*waitforpin) (void); ++ /* local settings */ ++ int udelay; ++ int mdelay; ++ int timeout; ++}; ++ ++int i2c_mcf_add_bus(struct i2c_adapter *); ++int i2c_mcf_del_bus(struct i2c_adapter *); ++ ++#endif /* I2C_ALGO_MCF_H */ +--- /dev/null ++++ b/drivers/i2c/busses/i2c-mcf548x.c +@@ -0,0 +1,595 @@ ++/* ++ * Performance and stability improvements: (C) Copyright 2008, ++ * Adrian Cox <adrian@humboldt.co.uk> ++ * ColdFire 547x/548x I2C master support ++ * Shrek Wu (b16972@freescale.com )moved the code driver/i2c/alg/mcf.c ++ * into driver/i2c/busses.And changed the driver to a platform driver. ++ */ ++#include <linux/i2c.h> ++#include "i2c-algo-mcf.h" ++ ++#include <linux/init.h> ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/delay.h> ++#include <linux/platform_device.h> ++#include <linux/sched.h> ++#include <linux/interrupt.h> ++#include <asm/io.h> ++ ++#include <asm/coldfire.h> ++#include <asm/m5485sim.h> ++#include <asm/m5485i2c.h> ++ ++#define get_clock(adap) (clock) ++#define get_own(adap) (own) ++ ++static int clock = 0x3b; /*50000 / 1024 ~ 49 KHz*/ ++module_param(clock, int, 0); ++MODULE_PARM_DESC(clock, ++ "Set I2C clock in kHz: 400=fast mode (default == 49khz)"); ++ ++static int own = 0x78; ++module_param(own, int, 0); ++MODULE_PARM_DESC(clock, "Set I2C Master controller address(0x78)"); ++ ++static struct i2c_algo_mcf_data i2c_mcf_board_data = { ++ .timeout = 10000, ++}; ++ ++static struct i2c_adapter i2c_mcf_board_adapter = { ++ .owner = THIS_MODULE, ++ .name = "MCF5485 adapter", ++ .id = I2C_HW_MPC107, ++ .algo_data = &i2c_mcf_board_data, ++ .class = I2C_CLASS_HWMON, ++ .timeout = 100, ++ .retries = 2 ++}; ++/* ++ * static void i2c_start() ++ * ++ * Generates START signal ++ */ ++static void ++i2c_start( ++ struct i2c_algo_mcf_data *adap ++) { ++ MCF_I2CR |= MCF_I2CR_MSTA; ++} ++ ++ ++/* ++ * static void i2c_stop() ++ * ++ * Generates STOP signal ++ */ ++static void ++i2c_stop( ++ struct i2c_algo_mcf_data *adap ++) { ++ MCF_I2CR &= ~MCF_I2CR_MSTA; ++} ++ ++static int ++i2c_getack( ++ struct i2c_algo_mcf_data *adap ++) { ++ return !(MCF_I2SR & MCF_I2SR_RXAK); ++} ++ ++/* ++ * static void i2c_repstart() ++ * ++ * Generates repeated start signal (without STOP while mastering the bus) ++ */ ++static void ++i2c_repstart( ++ struct i2c_algo_mcf_data *adap ++) { ++ MCF_I2CR |= MCF_I2CR_RSTA; ++ MCF_I2CR |= MCF_I2CR_MTX; ++} ++ ++ ++/* ++ * static void wait_for_bb() ++ * ++ * Wait for bus idle state ++ */ ++static int ++wait_for_bb( ++ struct i2c_algo_mcf_data *adap ++) { ++ int i; ++ for (i = 0; i < adap->timeout; i++) { ++ if (!(MCF_I2SR & MCF_I2SR_IBB)) ++ return 0; ++ udelay(100); ++ } ++ printk(KERN_ERR "%s: timeout", __FUNCTION__); ++ return -ETIMEDOUT; ++} ++ ++/* ++ * static void wait_for_not_bb() ++ * ++ * Wait for bus busy state ++ */ ++static int ++wait_for_not_bb( ++ struct i2c_algo_mcf_data *adap ++) { ++ int i; ++ for (i = 0; i < adap->timeout; i++) { ++ if (MCF_I2SR & MCF_I2SR_IBB) ++ return 0; ++ udelay(100); ++ } ++ printk(KERN_ERR "%s: timeout", __FUNCTION__); ++ return -ETIMEDOUT; ++} ++ ++/* ++ * static void wait_xfer_done() ++ * ++ * Wait for transfer to complete ++ */ ++static int ++wait_xfer_done( ++ struct i2c_algo_mcf_data *adap ++) { ++ int i; ++ ++ for (i = 0; i < adap->timeout; i++) { ++ if (MCF_I2SR & MCF_I2SR_IIF) { ++ MCF_I2SR &= ~MCF_I2SR_IIF; ++ return 0; ++ } ++ udelay(10); ++ } ++ printk(KERN_ERR "%s: timeout", __FUNCTION__); ++ return -ETIMEDOUT; ++} ++ ++ ++/* ++ * static void i2c_set_addr() ++ * ++ * Sets slave address to communicate ++ */ ++static int ++i2c_set_addr( ++ struct i2c_algo_mcf_data *adap, ++ struct i2c_msg *msg, ++ int retries ++) { ++ unsigned short flags = msg->flags; ++ unsigned char addr; ++ MCF_I2CR |= MCF_I2CR_MTX; ++ if ((flags & I2C_M_TEN)) { ++ /* 10 bit address not supported yet */ ++ return -EIO; ++ } else { ++ /* normal 7bit address */ ++ addr = (msg->addr << 1); ++ if (flags & I2C_M_RD) ++ addr |= 1; ++ if (flags & I2C_M_REV_DIR_ADDR) ++ addr ^= 1; ++ ++ MCF_I2DR = addr; ++ } ++ return 0; ++} ++ ++ ++/* ++ * static void mcf_i2c_init() ++ * ++ * Perform ColdFire i2c initialization ++ */ ++static void ++mcf_i2c_init(struct i2c_algo_mcf_data *adap) ++{ ++ u8 dummy; ++ /* Setup GPIO lines */ ++ MCF_PAR_FECI2CIRQ |= MCF_PAR_SDA; ++ MCF_PAR_FECI2CIRQ |= MCF_PAR_SCL; ++ ++ /* Ensure slaves are in idle state */ ++ if (MCF_I2SR & MCF_I2SR_IBB) { ++ MCF_I2ICR = 0x00; ++ MCF_I2CR = 0x00; ++ MCF_I2CR = 0x0A; ++ dummy = MCF_I2DR; ++ MCF_I2SR = 0x00; ++ MCF_I2CR = 0x00; ++ MCF_I2ICR = 0x01; ++ } ++ ++ /* setup SCL clock */ ++ MCF_I2FDR = get_clock(adap); ++ ++ /* set slave address */ ++ MCF_I2AR = get_own(adap); ++ ++ /* enable I2C module */ ++ MCF_I2CR = MCF_I2CR_IEN; ++} ++ ++static int i2c_outb( ++ struct i2c_adapter *i2c_adap, ++ char c ++) { ++ ++ struct i2c_algo_mcf_data *adap = i2c_adap->algo_data; ++ int timeout; ++ /* Put data to be sent */ ++ MCF_I2DR = c; ++ /* Wait for xfer completed*/ ++ timeout = wait_xfer_done(adap); ++ if (timeout) { ++ i2c_stop(adap); ++ wait_for_bb(adap); ++ printk(KERN_ERR "i2c-algo-mcf: %s i2c_write: " ++ "error - timeout.\n", i2c_adap->name); ++ return -EREMOTEIO; /* got a better one ?? */ ++ } ++ ++ return 0; ++} ++ ++ ++/* ++ * static void mcf_sendbytes() ++ * ++ * Perform tx data transfer ++ */ ++static int ++mcf_sendbytes( ++ struct i2c_adapter *i2c_adap, ++ const char *buf, ++ int count, int last ++) { ++ struct i2c_algo_mcf_data *adap = i2c_adap->algo_data; ++ int ret, i; ++ ++ /* Set master TX mode */ ++ MCF_I2CR |= MCF_I2CR_MTX; ++ ++ for (i = 0; i < count; ++i) { ++ printk(KERN_DEBUG "i2c-algo-mcf: %s i2c_write: writing %2.2X\n", ++ i2c_adap->name, buf[i]&0xff); ++ ret = i2c_outb(i2c_adap, buf[i]); ++ if (ret < 0) ++ return ret; ++ } ++ if (last) { ++ i2c_stop(adap); ++ wait_for_bb(adap); ++ } else { ++ /* i2c_repstart(adap);*/ ++ } ++ ++ return (i); ++} ++ ++ ++/* ++ * static void mcf_readbytes() ++ * ++ * Perform rx data transfer ++ */ ++static int ++mcf_readbytes( ++ struct i2c_adapter *i2c_adap, ++ char *buf, ++ int count, int last ++) { ++ int i; ++ struct i2c_algo_mcf_data *adap = i2c_adap->algo_data; ++ u8 dummy; ++ ++ /* Set master RX mode */ ++ MCF_I2CR &= ~MCF_I2CR_MTX; ++ MCF_I2CR &= ~MCF_I2CR_TXAK; ++ dummy = MCF_I2DR; ++ ++ for (i = 0; i < count-1; i++) { ++ if (wait_xfer_done(adap)) { ++ i2c_stop(adap); ++ wait_for_bb(adap); ++ printk(KERN_DEBUG ++ "i2c-algo-mcf: mcf_readbytes timed out.\n"); ++ return (-1); ++ } ++ ++ /* store next data byte */ ++ buf[i] = MCF_I2DR; ++ } ++ ++ if (wait_xfer_done(adap)) { ++ i2c_stop(adap); ++ wait_for_bb(adap); ++ printk(KERN_DEBUG "i2c-algo-mcf: mcf_readbytes timed out.\n"); ++ return (-1); ++ } ++ ++ /* Disable acknowlege (set I2CR.TXAK) */ ++ MCF_I2CR |= MCF_I2CR_TXAK; ++ buf[i] = MCF_I2DR; ++ if (wait_xfer_done(adap)) { ++ i2c_stop(adap); ++ wait_for_bb(adap); ++ printk(KERN_DEBUG "i2c-algo-mcf: mcf_readbytes timed out.\n"); ++ return (-1); ++ } ++ ++ if (last) { ++ i2c_stop(adap); ++ wait_for_bb(adap); ++ } else { ++ /* i2c_repstart(adap);*/ ++ } ++ ++ return (i+1); ++} ++ ++ ++/* ++ * static void mcf_xfer() ++ * ++ * Perform master data I/O transfer ++ */ ++static int ++mcf_xfer( ++ struct i2c_adapter *i2c_adap, ++ struct i2c_msg *msgs, ++ int num ++) { ++ struct i2c_algo_mcf_data *adap = i2c_adap->algo_data; ++ struct i2c_msg *pmsg; ++ int i; ++ int ret = 0, timeout; ++ ++ /* Skip own address */ ++ if (get_own(adap) == (msgs[0].addr << 1)) ++ return -EIO; ++ ++ /* Ensure slaves are in idle state */ ++ if (MCF_I2SR & MCF_I2SR_IBB) { ++ MCF_I2ICR = 0x00; ++ MCF_I2CR = 0x00; ++ MCF_I2CR = 0x0A; ++ timeout = MCF_I2DR; ++ MCF_I2SR = 0x00; ++ MCF_I2CR = 0x00; ++ MCF_I2ICR = 0x01; ++ } ++ /* setup SCL clock */ ++ MCF_I2FDR = get_clock(adap); ++ /* set slave address */ ++ MCF_I2AR = get_own(adap); ++ /* enable I2C module */ ++ MCF_I2CR = MCF_I2CR_IEN; ++ ++ MCF_I2CR |= MCF_I2CR_TXAK; ++ ++ /* Check for bus busy */ ++ wait_for_bb(adap); ++ ++ for (i = 0; ret >= 0 && i < num; i++) { ++ if (MCF_I2SR & MCF_I2SR_IBB) { ++ MCF_I2ICR = 0x00; ++ MCF_I2CR = 0x00; ++ MCF_I2CR = 0x0A; ++ timeout = MCF_I2DR; ++ MCF_I2SR = 0x00; ++ MCF_I2CR = 0x00; ++ MCF_I2ICR = 0x01; ++ } ++ /* setup SCL clock */ ++ MCF_I2FDR = get_clock(adap); ++ /* set slave address */ ++ MCF_I2AR = get_own(adap); ++ /* enable I2C module */ ++ MCF_I2CR = MCF_I2CR_IEN; ++ ++ MCF_I2CR |= MCF_I2CR_TXAK; ++ ++ /* Check for bus busy */ ++ wait_for_bb(adap); ++ ++ pmsg = &msgs[i]; ++ ++ printk(KERN_DEBUG "i2c-algo-mcf: Doing %s %d bytes " ++ "to 0x%02x - %d of %d messages\n", ++ pmsg->flags & I2C_M_RD ? "read" : "write", ++ pmsg->len, pmsg->addr, i + 1, num); ++ ++ /* Send START */ ++ /*if (i == 0)*/ ++ i2c_start(adap); ++ ++ /* Wait for Bus Busy */ ++ wait_for_not_bb(adap); ++ ++ MCF_I2CR |= MCF_I2CR_MTX; ++ ++ ret = i2c_set_addr(adap, pmsg, i2c_adap->retries); ++ if (ret < 0) ++ return ret; ++ ++ /* Wait for address transfer completion */ ++ wait_xfer_done(adap); ++ ++ /* Check for ACK */ ++ if (!i2c_getack(adap)) { ++ i2c_stop(adap); ++ wait_for_bb(adap); ++ printk(KERN_DEBUG "i2c-algo-mcf: No ack after " ++ "send address in mcf_xfer\n"); ++ return (-EREMOTEIO); ++ } ++ ++ printk(KERN_DEBUG "i2c-algo-mcf: Msg %d, " ++ "addr = 0x%x, flags = 0x%x, len = %d\n", ++ i, msgs[i].addr, msgs[i].flags, msgs[i].len); ++ /* Read */ ++ if (pmsg->flags & I2C_M_RD) { ++ /* read bytes into buffer*/ ++ ret = mcf_readbytes(i2c_adap, pmsg->buf, pmsg->len, ++ (i + 1 == num)); ++ ++ if (ret != pmsg->len) { ++ printk(KERN_DEBUG "i2c-algo-mcf: fail: " ++ "only read %d bytes.\n", ret); ++ } else { ++ printk(KERN_DEBUG "i2c-algo-mcf: " ++ "read %d bytes.\n", ret); ++ } ++ } else { ++ /* write bytes into buffer*/ ++ ret = mcf_sendbytes(i2c_adap, pmsg->buf, pmsg->len, ++ (i + 1 == num)); ++ if (ret != pmsg->len) { ++ printk(KERN_DEBUG "i2c-algo-mcf: fail: " ++ "only wrote %d bytes.\n", ret); ++ } else { ++ printk(KERN_DEBUG "i2c-algo-mcf: wrote" ++ "%d bytes.\n", ret); ++ } ++ } ++ MCF_I2CR = 0; ++ } ++ ++ /* Disable I2C module */ ++ MCF_I2CR = 0; ++ return (i); ++} ++ ++ ++/* ++ * static void mcf_func() ++ * ++ * Return algorithm funtionality ++ */ ++static u32 ++mcf_func( ++ struct i2c_adapter *i2c_adap ++) { ++ return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_I2C; ++} ++ ++/* ++ * ColdFire bus algorithm callbacks ++ */ ++static struct i2c_algorithm mcf_algo = { ++ .master_xfer = mcf_xfer, ++ .functionality = mcf_func, ++}; ++ ++/***********************************************************/ ++struct coldfire_i2c { ++ void __iomem *base; ++ struct resource *irqarea; ++ struct resource *ioarea; ++ u32 irq; ++ struct i2c_adapter *adap; ++ u32 flags; ++}; ++ ++/* ++ * registering functions to load algorithms at runtime ++ */ ++int i2c_mcf_add_bus(struct i2c_adapter *adap) ++{ ++ struct i2c_algo_mcf_data *mcf_adap = adap->algo_data; ++ ++ /*adap->id |= mcf_algo.id;*/ ++ adap->algo = &mcf_algo; ++ adap->timeout = 100; ++ ++ mcf_i2c_init(mcf_adap); ++ ++#ifdef MODULE ++ MOD_INC_USE_COUNT; ++#endif ++ ++ i2c_add_adapter(adap); ++ ++ return 0; ++} ++ ++static int mcf548x_i2c_probe(struct platform_device *pdev) ++{ ++ struct coldfire_i2c *i2c; ++ int rc = 0; ++ ++ /************************************************************/ ++ i2c = kzalloc(sizeof(*i2c), GFP_KERNEL); ++ if (!i2c) { ++ printk(KERN_ERR "%s kzalloc coldfire_i2c faile\n", ++ __FUNCTION__); ++ return -ENOMEM; ++ } ++ /****************************************************************/ ++ platform_set_drvdata(pdev, i2c); ++ ++ i2c->adap = &i2c_mcf_board_adapter; ++ i2c->adap->dev.parent = &pdev->dev; ++ rc = i2c_mcf_add_bus(i2c->adap); ++ if (rc < 0) { ++ printk(KERN_ERR "%s - failed to add adapter\n", __FUNCTION__); ++ rc = -ENODEV; ++ goto fail_add; ++ } ++ ++ printk(KERN_INFO "i2c-algo-mcf.o: I2C ColdFire algorithm" ++ " module is loaded.\n"); ++ return rc; ++ ++fail_add: ++ kfree(i2c); ++ return rc; ++}; ++ ++static int mcf548x_i2c_remove(struct platform_device *pdev) ++{ ++ struct coldfire_i2c *i2c = platform_get_drvdata(pdev); ++ ++ i2c_del_adapter(i2c->adap); ++ platform_set_drvdata(pdev, NULL); ++ iounmap(i2c->base); ++ kfree(i2c); ++ return 0; ++}; ++ ++/* Structure for a device driver */ ++static struct platform_driver mcf548x_i2c_driver = { ++ .probe = mcf548x_i2c_probe, ++ .remove = mcf548x_i2c_remove, ++ .driver = { ++ .owner = THIS_MODULE, ++ .name = "MCF548X-i2c", ++ }, ++}; ++ ++static int __init coldfire_i2c_init(void) ++{ ++ return platform_driver_register(&mcf548x_i2c_driver); ++} ++ ++static void __exit coldfire_i2c_exit(void) ++{ ++ platform_driver_unregister(&mcf548x_i2c_driver); ++} ++ ++module_init(coldfire_i2c_init); ++module_exit(coldfire_i2c_exit); ++ ++MODULE_AUTHOR("Adrian Cox <adrian@humboldt.co.uk>"); ++MODULE_DESCRIPTION ++ ("I2C-Bus adapter for MCF547x and MCF548x processors"); ++MODULE_LICENSE("GPL"); +--- /dev/null ++++ b/drivers/i2c/busses/i2c-mcf.c +@@ -0,0 +1,573 @@ ++/* ++ i2c-mcf.c - Part of lm_sensors, Linux kernel modules for hardware monitoring ++ ++ Copyright (c) 2005, Derek CL Cheung <derek.cheung@sympatico.ca> ++ <http://www3.sympatico.ca/derek.cheung> ++ ++ Copyright (c) 2006-2007, emlix ++ Sebastian Hess <sh@emlix.com> ++ ++ Copyright (c) 2006-2007 Freescale Semiconductor, Inc ++ Yaroslav Vinogradov <yaroslav.vinogradov@freescale.com> ++ Matt Waddel <Matt.Waddel@freescale.com> ++ ++ This program is free software; you can redistribute it and/or modify ++ it under the terms of the GNU General Public License as published by ++ the Free Software Foundation; either version 2 of the License, or ++ (at your option) any later version. ++ ++ This program is distributed in the hope that it will be useful, ++ but WITHOUT ANY WARRANTY; without even the implied warranty of ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ GNU General Public License for more details. ++ ++ You should have received a copy of the GNU General Public License ++ along with this program; if not, write to the Free Software ++ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. ++ ++ Changes: ++ v0.1 26 March 2005 ++ Initial Release - developed on uClinux with 2.6.9 kernel ++ ++ v0.2 29 May 2006 ++ Modified to be more generic and added support for ++ i2c_master_xfer ++ ++ This I2C adaptor supports the ColdFire CPU I2C module. Since most Coldfire ++ CPUs' I2C module use the same register set (e.g., MCF5249), the code is very ++ portable and re-usable to other Coldfire CPUs. ++ ++ The transmission frequency is set at about 100KHz for the CPU board with ++ 8MHz crystal. If the CPU board uses different system clock frequency, you ++ should change the following line: ++ static int __init i2c_coldfire_init(void) ++ { ++ ......... ++ // Set transmission frequency 0x15 = ~100kHz ++ *MCF_I2C_I2FDR = 0x15; ++ ........ ++ } ++ ++ Remember to perform a dummy read to set the ColdFire CPU's I2C module for ++ read before reading the actual byte from a device ++ ++ The I2C_SM_BUS_BLOCK_DATA function are not yet ready but most lm_senors ++ do not care ++*/ ++ ++#include <linux/init.h> ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/errno.h> ++#include <linux/i2c.h> ++#include <linux/delay.h> ++#include <linux/string.h> ++#include <asm/coldfire.h> ++#include <asm/mcfsim.h> ++#include <asm/types.h> ++#include <linux/platform_device.h> ++#include "i2c-mcf.h" ++ ++ ++static struct i2c_algorithm coldfire_algorithm = { ++ /*.name = "ColdFire I2C algorithm", ++ .id = I2C_ALGO_SMBUS,*/ ++ .smbus_xfer = coldfire_i2c_access, ++ .master_xfer = coldfire_i2c_master, ++ .functionality = coldfire_func, ++}; ++ ++ ++static struct i2c_adapter coldfire_adapter = { ++ .owner = THIS_MODULE, ++ .class = I2C_CLASS_HWMON, ++ .algo = &coldfire_algorithm, ++ .name = "ColdFire I2C adapter", ++}; ++ ++ ++__u16 lastaddr; ++__u16 lastop; ++ ++static inline int coldfire_do_first_start(__u16 addr,__u16 flags) ++{ ++ int err; ++ /* ++ * Generate a stop and put the I2C module into slave mode ++ */ ++ *MCF_I2C_I2CR &= ~MCF_I2C_I2CR_MSTA; ++ ++ /* ++ * Generate a new Start signal ++ */ ++ err = coldfire_i2c_start(flags & I2C_M_RD ? I2C_SMBUS_READ : I2C_SMBUS_WRITE, ++ addr, FIRST_START); ++ if(err) return err; ++ ++ lastaddr = addr; ++ lastop = flags & I2C_M_RD; /* Ensure everything for new start */ ++ return 0; ++} ++ ++ ++/* ++ * read one byte data from the I2C bus ++ */ ++static int coldfire_read_data(u8 * const rxData, const enum I2C_ACK_TYPE ackType) { ++ ++ int timeout; ++ ++ *MCF_I2C_I2CR &= ~MCF_I2C_I2CR_MTX; /* master receive mode*/ ++ ++ if (ackType == NACK) ++ *MCF_I2C_I2CR |= MCF_I2C_I2CR_TXAK; /* generate NA */ ++ else ++ *MCF_I2C_I2CR &= ~MCF_I2C_I2CR_TXAK; /* generate ACK */ ++ ++ ++ /* read data from the I2C bus */ ++ *rxData = *MCF_I2C_I2DR; ++ ++ /* printk(">>> %s I2DR data is %.2x \n", __FUNCTION__, *rxData); */ ++ ++ /* wait for data transfer to complete */ ++ timeout = 500; ++ while (timeout-- && !(*MCF_I2C_I2SR & MCF_I2C_I2SR_IIF)) ++ udelay(1); ++ if (timeout <= 0) ++ printk("%s - I2C IIF never set. Timeout is %d \n", __FUNCTION__, ++ timeout); ++ ++ ++ /* reset the interrupt bit */ ++ *MCF_I2C_I2SR &= ~MCF_I2C_I2SR_IIF; ++ ++ if (timeout <= 0 ) ++ return -1; ++ else ++ return 0; ++ ++}; ++ ++ ++/* ++ * write one byte data onto the I2C bus ++ */ ++static int coldfire_write_data(const u8 txData) { ++ ++ int timeout; ++ ++ timeout = 500; ++ ++ *MCF_I2C_I2CR |= MCF_I2C_I2CR_MTX; /* I2C module into TX mode */ ++ *MCF_I2C_I2DR = txData; /* send the data */ ++ ++ /* wait for data transfer to complete */ ++ /* rely on the interrupt handling bit */ ++ timeout = 500; ++ while (timeout-- && !(*MCF_I2C_I2SR & MCF_I2C_I2SR_IIF)) ++ udelay(1); ++ if (timeout <=0) ++ printk("%s - I2C IIF never set. Timeout is %d \n", __FUNCTION__, ++ timeout); ++ ++ ++ /* reset the interrupt bit */ ++ *MCF_I2C_I2SR &= ~MCF_I2C_I2SR_IIF; ++ ++ if (timeout <= 0 ) ++ return -1; ++ else ++ return 0; ++ ++}; ++ ++ ++ ++ ++/* ++ * Generate I2C start or repeat start signal ++ * Combine the 7 bit target_address and the R/W bit and put it onto the I2C bus ++ */ ++static int coldfire_i2c_start(const char read_write, const u16 target_address, const enum I2C_START_TYPE start_type) { ++ ++ int timeout; ++ ++ /* printk(">>> %s START TYPE %s \n", __FUNCTION__, ++ start_type == FIRST_START ? "FIRST_START":"REPEAT_START");*/ ++ ++ *MCF_I2C_I2CR |= MCF_I2C_I2CR_IEN; ++ ++ if (start_type == FIRST_START) { ++ /* Make sure the I2C bus is idle */ ++ timeout = 500; /* 500us timeout */ ++ while (timeout-- && (*MCF_I2C_I2SR & MCF_I2C_I2SR_IBB)) ++ udelay(1); ++ if (timeout <= 0) { ++ printk("%s - I2C bus always busy in the past 500us timeout is %d \n", __FUNCTION__, timeout); ++ goto check_rc; ++ } ++ /* generate a START and put the I2C module into MASTER TX mode*/ ++ *MCF_I2C_I2CR |= (MCF_I2C_I2CR_MSTA | MCF_I2C_I2CR_MTX); ++ ++ /* wait for bus busy to be set */ ++ timeout = 500; ++ while (timeout-- && !(*MCF_I2C_I2SR & MCF_I2C_I2SR_IBB)) ++ udelay(1); ++ if (timeout <= 0) { ++ printk("%s - I2C bus is never busy after START. Timeout is %d \n", __FUNCTION__, timeout); ++ goto check_rc; ++ } ++ ++ } else { ++ /* this is repeat START */ ++ udelay(500); /* need some delay before repeat start */ ++ *MCF_I2C_I2CR |= (MCF_I2C_I2CR_MSTA | MCF_I2C_I2CR_RSTA); ++ } ++ ++ ++ /* combine the R/W bit and the 7 bit target address and put it onto ++ the I2C bus */ ++ *MCF_I2C_I2DR = ((target_address & 0x7F) << 1) | (read_write == I2C_SMBUS_WRITE ? 0x00 : 0x01); ++ ++ /* wait for bus transfer to complete */ ++ /* when one byte transfer is completed, IIF set at the faling edge of ++ the 9th clock */ ++ timeout = 500; ++ while (timeout-- && !(*MCF_I2C_I2SR & MCF_I2C_I2SR_IIF)) ++ udelay(1); ++ if (timeout <= 0) ++ printk("%s - I2C IIF never set. Timeout is %d \n", __FUNCTION__, timeout); ++ ++ ++check_rc: ++ /* reset the interrupt bit */ ++ *MCF_I2C_I2SR &= ~MCF_I2C_I2SR_IIF; ++ ++ if (timeout <= 0) ++ return -1; ++ else ++ return 0; ++}; ++ ++ ++/* ++ * 5282 SMBUS supporting functions ++ */ ++ ++static s32 coldfire_i2c_access(struct i2c_adapter *adap, u16 addr, ++ unsigned short flags, char read_write, ++ u8 command, int size, union i2c_smbus_data *data) ++{ ++ int rc = 0; ++ u8 rxData, tempRxData[2]; ++ ++ switch (size) { ++ case I2C_SMBUS_QUICK: ++ rc = coldfire_i2c_start(read_write, addr, FIRST_START); /* generate START */ ++ break; ++ case I2C_SMBUS_BYTE: ++ rc = coldfire_i2c_start(read_write, addr, FIRST_START); ++ *MCF_I2C_I2CR |= MCF_I2C_I2CR_TXAK; /*generate NA */ ++ if (read_write == I2C_SMBUS_WRITE) ++ rc += coldfire_write_data(command); ++ else { ++ coldfire_read_data(&rxData, NACK);/*dummy read*/ ++ rc += coldfire_read_data(&rxData, NACK); ++ data->byte = rxData; ++ } ++ *MCF_I2C_I2CR &= ~MCF_I2C_I2CR_TXAK; /* reset ACK bit */ ++ break; ++ case I2C_SMBUS_BYTE_DATA: ++ rc = coldfire_i2c_start(I2C_SMBUS_WRITE, addr, FIRST_START); ++ rc += coldfire_write_data(command); ++ if (read_write == I2C_SMBUS_WRITE) ++ rc += coldfire_write_data(data->byte); ++ else { ++ /* This is SMBus READ Byte Data Request. ++ Perform REPEAT START */ ++ rc += coldfire_i2c_start(I2C_SMBUS_READ, addr, ++ REPEAT_START); ++ coldfire_read_data(&rxData, ACK);/* dummy read*/ ++ /* Disable Acknowledge, generate STOP after ++ next byte transfer */ ++ rc += coldfire_read_data(&rxData, NACK); ++ data->byte = rxData; ++ } ++ *MCF_I2C_I2CR &= ~MCF_I2C_I2CR_TXAK;/* reset to normal ACk */ ++ break; ++ case I2C_SMBUS_PROC_CALL: ++ case I2C_SMBUS_WORD_DATA: ++ dev_info(&adap->dev, "size = I2C_SMBUS_WORD_DATA \n"); ++ rc = coldfire_i2c_start(I2C_SMBUS_WRITE, addr, ++ FIRST_START); ++ rc += coldfire_write_data(command); ++ if (read_write == I2C_SMBUS_WRITE) { ++ rc += coldfire_write_data(data->word & 0x00FF); ++ rc += coldfire_write_data((data->word & 0x00FF) >> 8); ++ } else { ++ /* This is SMBUS READ WORD request. ++ Peform REPEAT START */ ++ rc += coldfire_i2c_start(I2C_SMBUS_READ, addr, ++ REPEAT_START); ++ coldfire_read_data(&rxData, ACK);/* dummy read*/ ++ /* Disable Acknowledge, generate STOP after ++ next byte transfer */ ++ /* read the MS byte from the device */ ++ rc += coldfire_read_data(&rxData, NACK); ++ tempRxData[1] = rxData; ++ /* read the LS byte from the device */ ++ rc += coldfire_read_data(&rxData, NACK); ++ tempRxData[0] = rxData; ++ /* the host driver expect little endian ++ convention. Swap the byte */ ++ data->word = (tempRxData[0] << 8)|tempRxData[1]; ++ } ++ *MCF_I2C_I2CR &= ~MCF_I2C_I2CR_TXAK; ++ break; ++ case I2C_SMBUS_BLOCK_DATA: ++ /* Not done yet */ ++ break; ++ default: ++ printk("Unsupported I2C size \n"); ++ rc = -1; ++ break; ++ }; ++ ++ /* Generate a STOP and put I2C module into slave mode */ ++ *MCF_I2C_I2CR &= ~MCF_I2C_I2CR_MSTA; ++ ++ /* restore interrupt */ ++ *MCF_I2C_I2CR |= MCF_I2C_I2CR_IIEN; ++ ++ if (rc < 0) ++ return -1; ++ else ++ return 0; ++}; ++ ++ ++/* ++ * List the SMBUS functions supported by this I2C adaptor ++ * Also tell the I2C Subsystem that we are able of master_xfer() ++ */ ++static u32 coldfire_func(struct i2c_adapter *adapter) ++{ ++ return(I2C_FUNC_SMBUS_QUICK | ++ I2C_FUNC_SMBUS_BYTE | ++ I2C_FUNC_SMBUS_PROC_CALL | ++ I2C_FUNC_SMBUS_BYTE_DATA | ++ I2C_FUNC_SMBUS_WORD_DATA | ++ I2C_FUNC_I2C | ++ I2C_FUNC_SMBUS_BLOCK_DATA); ++}; ++ ++static int coldfire_i2c_master(struct i2c_adapter *adap,struct i2c_msg *msgs, ++ int num) ++{ ++ u8 dummyRead; ++ struct i2c_msg *p; ++ int i, err = 0; ++ int ic=0; ++ ++ lastaddr = 0; ++ lastop = 8; ++ ++ /* disable the IRQ, we are doing polling */ ++ *MCF_I2C_I2CR &= ~MCF_I2C_I2CR_IIEN; ++ ++ dev_dbg(&adap->dev,"Num of actions: %d\n", num); ++ ++ for (i = 0; !err && i < num; i++) { ++ p = &msgs[i]; ++ ++ ++ if (!p->len) ++ { ++ dev_dbg(&adap->dev,"p->len == 0!\n"); ++ continue; ++ } ++ /* ++ * Generate a new Start, if the target address differs from ++ * the last target, generate a stop in this case first ++ */ ++ if(p->addr != lastaddr) ++ { ++ err = coldfire_do_first_start(p->addr,p->flags); ++ if(err) ++ { ++ dev_dbg(&adap->dev,"First Init failed!\n"); ++ break; ++ } ++ } ++ ++ else if((p->flags & I2C_M_RD) != lastop) ++ { ++ /* ++ * If the Operational Mode changed, we need to do this ++ * here ... ++ */ ++ dev_dbg(&adap->dev,"%s(): Direction changed, was: %d; is now: %d\n", __FUNCTION__, lastop, p->flags & I2C_M_RD); ++ ++ /* Last op was an read, now it's write: complete stop ++ and reinit */ ++ if (lastop & I2C_M_RD) ++ { ++ dev_dbg(&adap->dev,"%s(): The device is in read state, we must reset!\n", __FUNCTION__); ++ if((err = coldfire_do_first_start(p->addr,p->flags))) ++ break; ++ } ++ else ++ { ++ dev_dbg(&adap->dev,"%s(): We switchted to read mode\n",__FUNCTION__); ++ if((err = coldfire_i2c_start((p->flags & I2C_M_RD) ? I2C_SMBUS_READ : I2C_SMBUS_WRITE, ++ p->addr, REPEAT_START))) ++ break; ++ } ++ ++ lastop = p->flags & I2C_M_RD; /* Save the last op */ ++ } ++ ++ if (p->flags & I2C_M_RD) ++ { ++ /* ++ * When ever we get here, a new session was activated, ++ * so read a dummy byte ++ */ ++ coldfire_read_data(&dummyRead, ACK); ++ /* ++ * read p->len -1 bytes with ACK to the slave, ++ * read the last byte without the ACK, to inform him ++ * about the stop afterwards ++ */ ++ ic = 0; ++ while(!err && (ic < p->len-1 )) ++ { ++ err = coldfire_read_data(p->buf+ic, ACK ); ++ ic++; ++ } ++ if(!err) ++ err = coldfire_read_data(p->buf+ic, NACK); ++ dev_dbg(&coldfire_adapter.dev,"read: %2x\n",p->buf[ic]); ++ } ++ else ++ { ++ if(p->len == 2) ++ dev_dbg(&coldfire_adapter.dev,"writing: 0x %2x %2x\n", p->buf[0], p->buf[1]); ++ ++ /* ++ * Write data to the slave ++ */ ++ for(ic=0; !err && ic < p->len; ic++) ++ { ++ err = coldfire_write_data(p->buf[ic]); ++ if(err) ++ { ++ dev_dbg(&coldfire_adapter.dev, "Failed to write data\n"); ++ } ++ } ++ } ++ } ++ ++ /* ++ * Put the device into slave mode to enable the STOP Generation ++ * (the RTC needs this) ++ */ ++ *MCF_I2C_I2CR &= ~MCF_I2C_I2CR_MSTA; ++ ++ *MCF_I2C_I2CR &= ~MCF_I2C_I2CR_TXAK; /* reset the ACK bit */ ++ ++ /* restore interrupt */ ++ *MCF_I2C_I2CR |= MCF_I2C_I2CR_IIEN; ++ ++ /* Return the number of messages processed, or the error code. */ ++ if (err == 0) ++ err = num; ++ return err; ++} ++ ++ ++/* ++ * Initalize the 5282 I2C module ++ * Disable the 5282 I2C interrupt capability. Just use callback ++ */ ++ ++static int __init i2c_coldfire_init(void) ++{ ++ int retval; ++ u8 dummyRead; ++ ++#if defined(CONFIG_M532x) || defined(CONFIG_M5445X) ++ /* ++ * Initialize the GPIOs for I2C ++ */ ++ MCF_GPIO_PAR_FECI2C |= (0 ++ | MCF_GPIO_PAR_FECI2C_PAR_SDA(3) ++ | MCF_GPIO_PAR_FECI2C_PAR_SCL(3)); ++#elif defined(CONFIG_M5253) ++ { ++ volatile u32 *reg; ++ /* GPIO Bit 41 = SCL0, Bit 42 = SDA0 */ ++ reg = (volatile u32 *)(MCF_MBAR2 + MCFSIM2_GPIO1FUNC); ++ *reg &= 0xFFFFF9FF; ++ } ++#else ++ /* Initialize PASP0 and PASP1 to I2C functions, 5282 user guide 26-19 */ ++ /* Port AS Pin Assignment Register (PASPAR) */ ++ /* PASPA1 = 11 = AS1 pin is I2C SDA */ ++ /* PASPA0 = 11 = AS0 pin is I2C SCL */ ++ *MCF_GPIO_PASPAR |= 0x000F; /* u16 declaration */ ++#endif ++ ++ ++ /* Set transmission frequency 0x15 = ~100kHz */ ++ *MCF_I2C_I2FDR = 0x15; ++ ++ /* set the 5282 I2C slave address though we never use it */ ++ *MCF_I2C_I2ADR = 0x6A; ++ ++ /* Enable I2C module and if IBB is set, do the special initialzation */ ++ /* procedures as are documented at the 5282 User Guide page 24-11 */ ++ *MCF_I2C_I2CR |= MCF_I2C_I2CR_IEN; ++ if ((*MCF_I2C_I2SR & MCF_I2C_I2SR_IBB) == 1) { ++ printk("%s - do special 5282 I2C init procedures \n", ++ __FUNCTION__); ++ *MCF_I2C_I2CR = 0x00; ++ *MCF_I2C_I2CR = 0xA0; ++ dummyRead = *MCF_I2C_I2DR; ++ *MCF_I2C_I2SR = 0x00; ++ *MCF_I2C_I2CR = 0x00; ++ } ++ ++ /* default I2C mode is - slave and receive */ ++ *MCF_I2C_I2CR &= ~(MCF_I2C_I2CR_MSTA | MCF_I2C_I2CR_MTX); ++ ++ coldfire_adapter.dev.parent = &platform_bus; ++ retval = i2c_add_adapter(&coldfire_adapter); ++ ++ if (retval < 0) ++ printk("%s - return code is: %d \n", __FUNCTION__, retval); ++ ++ return retval; ++}; ++ ++ ++/* ++ * I2C module exit function ++ */ ++ ++static void __exit i2c_coldfire_exit(void) ++{ ++ /* disable I2C and Interrupt */ ++ *MCF_I2C_I2CR &= ~(MCF_I2C_I2CR_IEN | MCF_I2C_I2CR_IIEN); ++ i2c_del_adapter(&coldfire_adapter); ++ ++}; ++ ++ ++MODULE_AUTHOR("Derek CL Cheung <derek.cheung@sympatico.ca>"); ++MODULE_DESCRIPTION("MCF5282 I2C adaptor"); ++MODULE_LICENSE("GPL"); ++ ++module_init(i2c_coldfire_init); ++module_exit(i2c_coldfire_exit); +--- /dev/null ++++ b/drivers/i2c/busses/i2c-mcf.h +@@ -0,0 +1,75 @@ ++/* ++ i2c-mcf.h - header file for i2c-mcf.c ++ ++ Copyright (c) 2005, Derek CL Cheung <derek.cheung@sympatico.ca> ++ <http://www3.sympatico.ca/derek.cheung> ++ ++ Copyright (c) 2006-2007, emlix ++ Sebastian Hess <sh@emlix.com> ++ ++ Copyright (c) 2006-2007 Freescale Semiconductor, Inc ++ Yaroslav Vinogradov <yaroslav.vinogradov@freescale.com> ++ Matt Waddel <Matt.Waddel@freescale.com> ++ ++ This program is free software; you can redistribute it and/or modify ++ it under the terms of the GNU General Public License as published by ++ the Free Software Foundation; either version 2 of the License, or ++ (at your option) any later version. ++ ++ This program is distributed in the hope that it will be useful, ++ but WITHOUT ANY WARRANTY; without even the implied warranty of ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ GNU General Public License for more details. ++ ++ You should have received a copy of the GNU General Public License ++ along with this program; if not, write to the Free Software ++ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. ++ ++ Changes: ++ v0.1 26 March 2005 ++ Initial Release - developed on uClinux with 2.6.9 kernel ++ v0.2 29 May 2006 ++ Modified to be more generic and added support for ++ i2c_master_xfer ++*/ ++ ++ ++#ifndef __I2C_MCF_H__ ++#define __I2C_MCF_H__ ++ ++enum I2C_START_TYPE { FIRST_START, REPEAT_START }; ++enum I2C_ACK_TYPE { ACK, NACK}; ++ ++/* Function prototypes */ ++static u32 coldfire_func(struct i2c_adapter *adapter); ++static s32 coldfire_i2c_access(struct i2c_adapter *adap, u16 address, ++ unsigned short flags, char read_write, ++ u8 command, int size, union i2c_smbus_data *data); ++static int coldfire_write_data(const u8 data); ++static int coldfire_i2c_start(const char read_write, const u16 target_address, const enum I2C_START_TYPE i2c_start); ++static int coldfire_read_data(u8 * const rxData, const enum I2C_ACK_TYPE ackType); ++static int coldfire_i2c_master(struct i2c_adapter *adap,struct i2c_msg *msgs, int num); ++void dumpReg(char *, u16 addr, u8 data); ++ ++#define MCF_I2C_I2ADR_ADDR(x) (((x)&0x7F)<<0x01) ++#define MCF_I2C_I2FDR_IC(x) (((x)&0x3F)) ++ ++/* I2C Control Register */ ++#define MCF_I2C_I2CR_IEN (0x80) /* I2C enable */ ++#define MCF_I2C_I2CR_IIEN (0x40) /* interrupt enable */ ++#define MCF_I2C_I2CR_MSTA (0x20) /* master/slave mode */ ++#define MCF_I2C_I2CR_MTX (0x10) /* transmit/receive mode */ ++#define MCF_I2C_I2CR_TXAK (0x08) /* transmit acknowledge enable */ ++#define MCF_I2C_I2CR_RSTA (0x04) /* repeat start */ ++ ++/* I2C Status Register */ ++#define MCF_I2C_I2SR_ICF (0x80) /* data transfer bit */ ++#define MCF_I2C_I2SR_IAAS (0x40) /* I2C addressed as a slave */ ++#define MCF_I2C_I2SR_IBB (0x20) /* I2C bus busy */ ++#define MCF_I2C_I2SR_IAL (0x10) /* aribitration lost */ ++#define MCF_I2C_I2SR_SRW (0x04) /* slave read/write */ ++#define MCF_I2C_I2SR_IIF (0x02) /* I2C interrupt */ ++#define MCF_I2C_I2SR_RXAK (0x01) /* received acknowledge */ ++ ++/********************************************************************/ ++#endif /* __I2C_MCF_H__ */ +--- a/drivers/i2c/busses/Kconfig ++++ b/drivers/i2c/busses/Kconfig +@@ -4,6 +4,18 @@ + + menu "I2C Hardware Bus support" + ++config I2C_MCF548x ++ tristate "I2C MCF547x/548x interfaces" ++ depends on I2C ++ help ++ This allows you to use the I2C adapters found on the Freescale ++ MCF547x/548x microcontrollers. ++ Say Y if you own an I2C adapter belonging to this class and then say ++ Y to the specific driver for you adapter below. ++ ++ This support is also available as a module. If so, the module ++ will be called i2c-algo-mcf. ++ + config I2C_ALI1535 + tristate "ALI 1535" + depends on PCI +@@ -290,6 +302,16 @@ config I2C_POWERMAC + This support is also available as a module. If so, the module + will be called i2c-powermac. + ++config I2C_MCF ++ tristate "MCF ColdFire" ++ depends on I2C && EXPERIMENTAL ++ help ++ If you say yes to this option, support will be included for the ++ I2C on most ColdFire CPUs ++ ++ This driver can also be built as a module. If so, the module ++ will be called i2c-mcf. ++ + config I2C_MPC + tristate "MPC107/824x/85xx/52xx/86xx" + depends on PPC32 +--- a/drivers/i2c/busses/Makefile ++++ b/drivers/i2c/busses/Makefile +@@ -52,6 +52,8 @@ obj-$(CONFIG_I2C_VIAPRO) += i2c-viapro.o + obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o + obj-$(CONFIG_SCx200_ACB) += scx200_acb.o + obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o ++obj-$(CONFIG_I2C_MCF548x) += i2c-mcf548x.o ++obj-$(CONFIG_I2C_MCF) += i2c-mcf.o + + ifeq ($(CONFIG_I2C_DEBUG_BUS),y) + EXTRA_CFLAGS += -DDEBUG +--- a/drivers/macintosh/Kconfig ++++ b/drivers/macintosh/Kconfig +@@ -118,7 +118,6 @@ config PMAC_SMU + + config PMAC_APM_EMU + tristate "APM emulation" +- select APM_EMULATION + depends on ADB_PMU && PM && PPC32 + + config PMAC_MEDIABAY +--- a/drivers/Makefile ++++ b/drivers/Makefile +@@ -93,3 +93,5 @@ obj-$(CONFIG_PPC_PS3) += ps3/ + obj-$(CONFIG_OF) += of/ + obj-$(CONFIG_SSB) += ssb/ + obj-$(CONFIG_VIRTIO) += virtio/ ++ ++obj-$(CONFIG_MCD_DMA) += dma/ +--- /dev/null ++++ b/drivers/net/can/flexcan/flexcan.c +@@ -0,0 +1,378 @@ ++/* ++ * flexcan.c ++ * ++ * DESCRIPTION: ++ * CAN bus driver for the alone generic (as possible as) FLEXCAN controller. ++ * ++ * AUTHOR: ++ * Andrey Volkov <avolkov@varma-el.com> ++ * ++ * COPYRIGHT: ++ * 2005-2006, Varma Electronics Oy ++ * ++ * LICENCE: ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ * ++ * HISTORY: ++ * 2008-06-23 Support for MCF548x's FlexCAN ++ * Huan, Wang <b18965@freescale.com> ++ */ ++ ++ ++ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/interrupt.h> ++#include <linux/delay.h> ++#include <linux/netdevice.h> ++#include <linux/if_arp.h> ++#include <linux/if_ether.h> ++#include <linux/can.h> ++#include <linux/list.h> ++#include <linux/io.h> ++ ++#include <linux/can/dev.h> ++#include <linux/can/error.h> ++#include "flexcan.h" ++#include <asm/coldfire.h> ++#include <asm/m5485sim.h> ++#include <linux/can/version.h> /* for RCSID. Removed by mkpatch script */ ++RCSID("$Id$"); ++ ++struct flexcan_priv { ++ struct can_priv can; ++ volatile unsigned long flags; ++ u8 shadow_statflg; ++ u8 shadow_canrier; ++ u8 cur_pri; ++ u8 tx_active; ++ ++ struct list_head tx_head; ++ struct napi_struct napi; ++ struct net_device *dev; ++}; ++ ++ ++static int flexcan_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) ++{ ++ struct can_frame *frame = (struct can_frame *)skb->data; ++ struct flexcan_regs *regs = (struct flexcan_regs *)dev->base_addr; ++ int i, len; ++ int txbuf = 0; ++ u32 can_id, can_ext, tmp, tmp1; ++ ++ /* Transmission inactive */ ++ regs->cantxfg[txbuf].can_dlc = MB_CNT_CODE(0x08); ++ ++ can_ext = frame->can_id; ++ if (can_ext & CAN_EFF_FLAG) { ++ /* Frame format is extended */ ++ regs->cantxfg[txbuf].can_dlc |= (1 << 21); ++ regs->cantxfg[txbuf].can_dlc |= (1 << 22); ++ can_id = frame->can_id & MB_ID_EXT; ++ if (frame->can_id & CAN_RTR_FLAG) ++ regs->cantxfg[txbuf].can_dlc |= (1 << 20); ++ ++ tmp = (can_id & CAN_SFF_MASK) << 18; ++ tmp1 = can_id >> 11; ++ can_id = tmp | tmp1; ++ regs->cantxfg[txbuf].can_id = can_id; ++ } else { ++ /* Frame format is standard */ ++ can_id = frame->can_id & MB_ID_EXT; ++ if (frame->can_id & CAN_RTR_FLAG) ++ regs->cantxfg[txbuf].can_dlc |= (1 << 20); ++ ++ regs->cantxfg[txbuf].can_id = can_id << 18; ++ } ++ ++ len = 8; ++ for (i = 0; i < len; i++) ++ regs->cantxfg[txbuf].data[i] = frame->data[i]; ++ ++ regs->cantxfg[txbuf].can_dlc |= len << 16; ++ /* Transmission active */ ++ regs->cantxfg[txbuf].can_dlc |= MB_CNT_CODE(0x0c); ++ kfree_skb(skb); ++ return NETDEV_TX_OK; ++} ++ ++static void flexcan_tx_timeout(struct net_device *dev) ++{ ++ struct sk_buff *skb; ++ struct flexcan_regs *regs = (struct flexcan_regs *)dev->base_addr; ++ struct can_frame *frame; ++ int length = 8; ++ ++ /* Diable the interrupts */ ++ regs->imask = IMASK_BUFF_DISABLE_ALL; ++ ++ skb = dev_alloc_skb(sizeof(struct can_frame)); ++ if (!skb) { ++ if (printk_ratelimit()) ++ dev_notice(ND2D(dev), "TIMEOUT packet dropped.\n"); ++ return; ++ } ++ frame = (struct can_frame *)skb_put(skb, sizeof(struct can_frame)); ++ ++ frame->can_dlc = length; ++ ++ skb->dev = dev; ++ skb->protocol = __constant_htons(ETH_P_CAN); ++ skb->pkt_type = PACKET_BROADCAST; ++ skb->ip_summed = CHECKSUM_UNNECESSARY; ++ ++ netif_rx(skb); ++} ++ ++static irqreturn_t flexcan_isr(int irq, void *dev_id) ++{ ++ struct net_device *dev = (struct net_device *)dev_id; ++ struct flexcan_regs *regs = (struct flexcan_regs *)dev->base_addr; ++ struct net_device_stats *stats = dev->get_stats(dev); ++ struct sk_buff *skb; ++ struct can_frame *frame; ++ u32 iflags, oflags; ++ int i, k; ++ int retval = 1; ++ ++ iflags = regs->iflag; ++ oflags = iflags; ++ for (i = 0; i < 16; i++) { ++ if (iflags & (0x01 << i)) { ++ struct flexcan_mb *mb = ®s->cantxfg[i]; ++ int ctrl = mb->can_dlc; ++ int code = (ctrl >> 24) & 0x0f; ++ int length = (ctrl >> 16) & 0x0f; ++ u32 tmp, tmp1; ++ ++ if (code < 8 && (length > 0)) { ++ /* receive frame */ ++ skb = dev_alloc_skb(sizeof(struct can_frame)); ++ if (!skb) ++ dev_notice(ND2D(dev), ++ "Packets dropped.\n"); ++ skb->dev = dev; ++ frame = (struct can_frame *)skb_put(skb, ++ sizeof(struct can_frame)); ++ ++ frame->can_id &= 0x0; ++ frame->can_dlc = length; ++ tmp1 = mb->can_id & MB_ID_EXT; ++ if (ctrl & MB_CNT_IDE) { ++ tmp = tmp1; ++ tmp = (tmp >> 18) & CAN_SFF_MASK; ++ frame->can_id = (tmp1 << 11) | tmp; ++ frame->can_id &= CAN_EFF_MASK; ++ frame->can_id |= CAN_EFF_FLAG; ++ if (ctrl & MB_CNT_RTR) ++ frame->can_id |= CAN_RTR_FLAG; ++ } else { ++ frame->can_id = tmp1 >> 18; ++ if (ctrl & MB_CNT_RTR) ++ frame->can_id |= CAN_RTR_FLAG; ++ } ++ ++ for (k = 0; k < 8; k++) ++ frame->data[k] = mb->data[k]; ++ ++ mb->can_dlc &= MB_CODE_MASK; ++ mb->can_dlc |= MB_CNT_CODE(0x04); ++ ++ stats->rx_packets++; ++ stats->rx_bytes += frame->can_dlc; ++ skb->dev = dev; ++ skb->protocol = __constant_htons(ETH_P_CAN); ++ skb->ip_summed = CHECKSUM_UNNECESSARY; ++ ++ retval = netif_rx(skb); ++ if (retval == NET_RX_DROP) ++ dev_notice(ND2D(dev), ++ "Packets dropped.\n"); ++ } else { ++ /* transmit frame */ ++ mb->can_dlc = MB_CNT_CODE(0x04); ++ } ++ } ++ } ++ regs->iflag = oflags; ++ ++ return IRQ_HANDLED; ++} ++ ++static int flexcan_do_set_bit_time(struct net_device *dev, ++ struct can_bittime *bt) ++{ ++ struct flexcan_priv *priv = netdev_priv(dev); ++ struct flexcan_regs *regs = (struct flexcan_regs *)dev->base_addr; ++ int ret = 0; ++ u32 reg; ++ ++ if (bt->type != CAN_BITTIME_STD) ++ return -EINVAL; ++ ++ spin_lock_irq(&priv->can.irq_lock); ++ ++ reg = CANCTRL_PRESDIV(bt->std.brp) | CANCTRL_PSEG1(bt->std.phase_seg1 ++ - 1) | CANCTRL_PSEG2(bt->std.phase_seg2 - 1); ++ regs->canctrl &= CANCTRL_BITTIME; ++ regs->canctrl |= (reg | CANCTRL_SAMP(bt->std.sam) | ++ CANCTRL_PROPSEG(bt->std.prop_seg - 1)); ++ ++ spin_unlock_irq(&priv->can.irq_lock); ++ return ret; ++} ++ ++ ++static int flexcan_open(struct net_device *dev) ++{ ++ int ret, i, j; ++ struct flexcan_regs *regs = (struct flexcan_regs *)dev->base_addr; ++ ++#if defined(CONFIG_M547X_8X) ++ MCF_PAR_TIMER = MCF_PAR_TIMER | 0x28; ++ MCF_PAR_TIMER = MCF_PAR_TIMER & 0xf8; ++ MCF_PAR_DSPI = MCF_PAR_DSPI | 0x0a00; ++ MCF_PAR_FECI2CIRQ = MCF_PAR_FECI2CIRQ | 0x0283; ++ MCF_PAR_PSCn(2) = MCF_PAR_PSCn(2) & 0x0f; ++ MCF_PAR_PSCn(2) = MCF_PAR_PSCn(2) | 0x50; ++#endif ++ ++ regs->canmcr |= CANMCR_SOFTRST; ++ regs->canmcr |= CANMCR_MDIS; ++ udelay(10); ++ ++ if ((regs->canmcr & CANMCR_SOFTRST) != 0x0) { ++ dev_err(ND2D(dev), "Failed to softreset can module.\n"); ++ return -1; ++ } ++ ++ /* Enable error and bus off interrupt */ ++ regs->canctrl |= (CANCTRL_RJW(3) | CANCTRL_ERRMSK | ++ CANCTRL_BOFFMSK); ++ ++ /* Set lowest buffer transmitted first */ ++ regs->canctrl |= CANCTRL_LBUF; ++ ++ for (i = 0; i < 16; i++) { ++ regs->cantxfg[i].can_dlc = 0; ++ regs->cantxfg[i].can_id = 0; ++ for (j = 0; j < 8; j++) ++ regs->cantxfg[i].data[j] = 0; ++ ++ /* Put MB into rx queue */ ++ regs->cantxfg[i].can_dlc = MB_CNT_CODE(0x04); ++ } ++ ++ /* acceptance mask/acceptance code (accept everything) */ ++ regs->rxgmask = 0x00000000; ++ regs->rx14mask = 0x00000000; ++ regs->rx15mask = 0x00000000; ++ /* extended frame */ ++ regs->cantxfg[14].can_dlc |= 0x600000; ++ /* Enable flexcan module */ ++ regs->canmcr &= ~CANMCR_MDIS; ++ /* Synchronize with the can bus */ ++ regs->canmcr &= ~CANMCR_HALT; ++ ++#if defined(CONFIG_M547X_8X) ++ for (i = 0; i < 2; i++) { ++ MCF_ICR(ISC_CANn_MBOR(i)) = 0x33; ++ MCF_ICR(ISC_CANn_ERR(i)) = 0x33; ++ MCF_ICR(ISC_CANn_BUSOFF(i)) = 0x33; ++ } ++ ++ ret = request_irq(dev->irq + 64, flexcan_isr, IRQF_DISABLED, ++ dev->name, dev); ++ ret = request_irq(dev->irq + 1 + 64, flexcan_isr, IRQF_DISABLED, ++ dev->name, dev); ++ ret = request_irq(dev->irq + 2 + 64, flexcan_isr, IRQF_DISABLED, ++ dev->name, dev); ++ if (ret < 0) { ++ printk(KERN_ERR "%s - failed to attach interrupt.\n", ++ dev->name); ++ return ret; ++ } ++#endif ++ ++ /* Enable all interrupts */ ++ regs->imask = IMASK_BUFF_ENABLE_ALL; ++ netif_start_queue(dev); ++ return 0; ++} ++ ++static int flexcan_close(struct net_device *dev) ++{ ++ struct flexcan_regs *regs = (struct flexcan_regs *)dev->base_addr; ++ ++ netif_stop_queue(dev); ++ ++ /* Disable all interrupts */ ++ regs->imask = IMASK_BUFF_DISABLE_ALL; ++ free_irq(dev->irq + 64, dev); ++ free_irq(dev->irq + 1 + 64, dev); ++ free_irq(dev->irq + 2 + 64, dev); ++ ++ /* Disable module */ ++ regs->canmcr |= CANMCR_MDIS; ++ return 0; ++} ++ ++int register_flexcandev(struct net_device *dev, int clock_src) ++{ ++ struct flexcan_regs *regs = (struct flexcan_regs *)dev->base_addr; ++ ++ regs->canmcr &= ~CANMCR_MDIS; ++ udelay(100); ++ regs->canmcr |= (CANMCR_FRZ | CANMCR_HALT); ++ return register_netdev(dev); ++} ++EXPORT_SYMBOL(register_flexcandev); ++ ++void unregister_flexcandev(struct net_device *dev) ++{ ++ struct flexcan_regs *regs = (struct flexcan_regs *)dev->base_addr; ++ ++ regs->canmcr |= (CANMCR_FRZ | CANMCR_HALT); ++ regs->canmcr |= CANMCR_MDIS; ++ ++ unregister_netdev(dev); ++} ++EXPORT_SYMBOL(unregister_flexcandev); ++ ++struct net_device *alloc_flexcandev(void) ++{ ++ struct net_device *dev; ++ struct flexcan_priv *priv; ++ ++ dev = alloc_candev(sizeof(struct flexcan_priv)); ++ if (!dev) ++ return NULL; ++ ++ priv = netdev_priv(dev); ++ priv->dev = dev; ++ dev->open = flexcan_open; ++ dev->stop = flexcan_close; ++ dev->hard_start_xmit = flexcan_hard_start_xmit; ++ dev->tx_timeout = flexcan_tx_timeout; ++ dev->flags |= IFF_NOARP; ++ priv->can.do_set_bit_time = flexcan_do_set_bit_time; ++ return dev; ++} ++EXPORT_SYMBOL(alloc_flexcandev); ++ ++MODULE_AUTHOR("Andrey Volkov <avolkov@varma-el.com>"); ++MODULE_LICENSE("GPL v2"); ++MODULE_DESCRIPTION("CAN port driver for flexcan based chip"); +--- /dev/null ++++ b/drivers/net/can/flexcan/flexcan.h +@@ -0,0 +1,148 @@ ++/* ++ * flexcan.h ++ * ++ * DESCRIPTION: ++ * Definitions of consts/structs to drive the Freescale FLEXCAN. ++ * ++ */ ++ ++#ifndef __FLEXCAN_H__ ++#define __FLEXCAN_H__ ++ ++#include <linux/autoconf.h> ++#include <linux/types.h> ++ ++/* FLEXCAN module configuration register (CANMCR) bits */ ++#define CANMCR_MDIS 0x80000000 ++#define CANMCR_FRZ 0x40000000 ++#define CANMCR_HALT 0x10000000 ++#define CANMCR_SOFTRST 0x02000000 ++#define CANMCR_FRZACK 0x01000000 ++#define CANMCR_SUPV 0x00800000 ++#define CANMCR_MAXMB(x) ((x)&0x0f) ++ ++/* FLEXCAN control register (CANCTRL) bits */ ++#define CANCTRL_PRESDIV(x) (((x)&0xff)<<24) ++#define CANCTRL_RJW(x) (((x)&0x03)<<22) ++#define CANCTRL_PSEG1(x) (((x)&0x07)<<19) ++#define CANCTRL_PSEG2(x) (((x)&0x07)<<16) ++#define CANCTRL_BOFFMSK 0x00008000 ++#define CANCTRL_ERRMSK 0x00004000 ++#define CANCTRL_LPB 0x00001000 ++#define CANCTRL_SAMP(x) (((x)&0x1)<<7) ++#define CANCTRL_BOFFREC 0x00000040 ++#define CANCTRL_TSYNC 0x00000020 ++#define CANCTRL_LBUF 0x00000010 ++#define CANCTRL_LOM 0x00000008 ++#define CANCTRL_PROPSEG(x) ((x)&0x07) ++#define CANCTRL_BITTIME 0x00c0d078 ++ ++/* FLEXCAN error counter register (ERRCNT) bits */ ++#define ERRCNT_REXECTR(x) (((x)&0xff)<<8) ++#define ERRCNT_TXECTR(x) ((x)&0xff) ++ ++/* FLEXCAN error and status register (ERRSTAT) bits */ ++#define ERRSTAT_BITERR(x) (((x)&0x03)<<14) ++#define ERRSTAT_ACKERR 0x00002000 ++#define ERRSTAT_CRCERR 0x00001000 ++#define ERRSTAT_FRMERR 0x00000800 ++#define ERRSTAT_STFERR 0x00000400 ++#define ERRSTAT_TXWRN 0x00000200 ++#define ERRSTAT_RXWRN 0x00000100 ++#define ERRSTAT_IDLE 0x00000080 ++#define ERRSTAT_TXRX 0x00000040 ++#define ERRSTAT_FLTCONF(x) (((x)&0x03)<<4) ++#define ERRSTAT_BOFFINT 0x00000004 ++#define ERRSTAT_ERRINT 0x00000002 ++ ++/* FLEXCAN interrupt mask register (IMASK) bits */ ++#define IMASK_BUF15M 0x8000 ++#define IMASK_BUF14M 0x4000 ++#define IMASK_BUF13M 0x2000 ++#define IMASK_BUF12M 0x1000 ++#define IMASK_BUF11M 0x0800 ++#define IMASK_BUF10M 0x0400 ++#define IMASK_BUF9M 0x0200 ++#define IMASK_BUF8M 0x0100 ++#define IMASK_BUF7M 0x0080 ++#define IMASK_BUF6M 0x0040 ++#define IMASK_BUF5M 0x0020 ++#define IMASK_BUF4M 0x0010 ++#define IMASK_BUF3M 0x0008 ++#define IMASK_BUF2M 0x0004 ++#define IMASK_BUF1M 0x0002 ++#define IMASK_BUF0M 0x0001 ++#define IMASK_BUFnM(x) (0x1<<(x)) ++#define IMASK_BUFF_ENABLE_ALL 0xffff ++#define IMASK_BUFF_DISABLE_ALL 0x0000 ++ ++/* FLEXCAN interrupt flag register (IFLAG) bits */ ++#define IFLAG_BUF15M 0x8000 ++#define IFLAG_BUF14M 0x4000 ++#define IFLAG_BUF13M 0x2000 ++#define IFLAG_BUF12M 0x1000 ++#define IFLAG_BUF11M 0x0800 ++#define IFLAG_BUF10M 0x0400 ++#define IFLAG_BUF9M 0x0200 ++#define IFLAG_BUF8M 0x0100 ++#define IFLAG_BUF7M 0x0080 ++#define IFLAG_BUF6M 0x0040 ++#define IFLAG_BUF5M 0x0020 ++#define IFLAG_BUF4M 0x0010 ++#define IFLAG_BUF3M 0x0008 ++#define IFLAG_BUF2M 0x0004 ++#define IFLAG_BUF1M 0x0002 ++#define IFLAG_BUF0M 0x0001 ++#define IFLAG_BUFnM(x) (0x1<<(x)) ++#define IFLAG_BUFF_SET_ALL 0xffff ++#define IFLAG_BUFF_DISABLE_ALL 0x0000 ++ ++/* FLEXCAN message buffers */ ++#define MB_CNT_CODE(x) (((x)&0x0f)<<24) ++#define MB_CNT_SRR 0x00400000 ++#define MB_CNT_IDE 0x00200000 ++#define MB_CNT_RTR 0x00100000 ++#define MB_CNT_LENGTH(x) (((x)&0x0f)<<16) ++#define MB_CNT_TIMESTAMP(x) ((x)&0xffff) ++ ++#define MB_ID_STD ((0x7ff)<<18) ++#define MB_ID_EXT 0x1fffffff ++#define MB_CODE_MASK 0xf0ffffff ++ ++/* Structure of the message buffer */ ++struct flexcan_mb { ++ u32 can_dlc; ++ u32 can_id; ++ u8 data[8]; ++}; ++ ++/* Structure of the hardware registers */ ++struct flexcan_regs { ++ u32 canmcr; ++ u32 canctrl; ++ u32 timer; ++ u32 reserved1; ++ u32 rxgmask; ++ u32 rx14mask; ++ u32 rx15mask; ++ u32 errcnt; ++ u32 errstat; ++ u32 reserved2; ++ u32 imask; ++ u32 reserved3; ++ u32 iflag; ++ u32 reserved4[19]; ++ struct flexcan_mb cantxfg[16]; ++}; ++ ++struct flexcan_platform_data { ++ u8 clock_src; /* FLEXCAN clock source CRIN or SYSCLK */ ++ u32 clock_frq; /* can ref. clock, in Hz */ ++}; ++ ++struct net_device *alloc_flexcandev(void); ++ ++extern int register_flexcandev(struct net_device *dev, int clock_src); ++extern void unregister_flexcandev(struct net_device *dev); ++ ++#endif /* __FLEXCAN_H__ */ +--- /dev/null ++++ b/drivers/net/can/flexcan/Makefile +@@ -0,0 +1,5 @@ ++ ++obj-$(CONFIG_CAN_MCF547X_8X) += flexcan-mcf548x.o ++ ++flexcan-mcf548x-objs := flexcan.o mcf548x_can.o ++ +--- /dev/null ++++ b/drivers/net/can/flexcan/mcf548x_can.c +@@ -0,0 +1,213 @@ ++/* ++ * DESCRIPTION: ++ * CAN bus driver for the Freescale MCF548x embedded CPU. ++ * ++ * AUTHOR: ++ * Andrey Volkov <avolkov@varma-el.com> ++ * ++ * COPYRIGHT: ++ * 2004-2005, Varma Electronics Oy ++ * ++ * LICENCE: ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ * ++ * HISTORY: ++ * 2008-06-23 support for MCF548x's FlexCAN ++ * Huan, Wang <b18965@freescale.com> ++ * 2005-02-03 created ++ * ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/interrupt.h> ++#include <linux/platform_device.h> ++#include <linux/netdevice.h> ++#include <linux/can.h> ++#include <linux/can/dev.h> ++#include <linux/io.h> ++ ++#include "flexcan.h" ++#include <asm/coldfire.h> ++#include <asm/m5485sim.h> ++#include <linux/can/version.h> /* for RCSID. Removed by mkpatch script */ ++ ++RCSID("$Id$"); ++ ++#define PDEV_MAX 2 ++ ++struct platform_device *pdev[PDEV_MAX]; ++ ++static int __devinit mcf548x_can_probe(struct platform_device *pdev) ++{ ++ struct resource *mem; ++ struct net_device *dev; ++ struct flexcan_platform_data *pdata = pdev->dev.platform_data; ++ struct can_priv *can; ++ u32 mem_size; ++ int ret = -ENODEV; ++ ++ if (!pdata) ++ return ret; ++ ++ dev = alloc_flexcandev(); ++ if (!dev) ++ return -ENOMEM; ++ can = netdev_priv(dev); ++ ++ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ ++ dev->irq = platform_get_irq(pdev, 0); ++ if (!mem || !dev->irq) ++ goto req_error; ++ ++ mem_size = mem->end - mem->start + 1; ++ if (!request_mem_region(mem->start, mem_size, pdev->dev.driver->name)) { ++ dev_err(&pdev->dev, "resource unavailable\n"); ++ goto req_error; ++ } ++ SET_NETDEV_DEV(dev, &pdev->dev); ++ ++ dev->base_addr = (unsigned long)ioremap_nocache(mem->start, mem_size); ++ if (!dev->base_addr) { ++ dev_err(&pdev->dev, "failed to map can port\n"); ++ ret = -ENOMEM; ++ goto fail_map; ++ } ++ can->can_sys_clock = pdata->clock_frq; ++ platform_set_drvdata(pdev, dev); ++ ret = register_flexcandev(dev, pdata->clock_src); ++ if (ret >= 0) { ++ dev_info(&pdev->dev, "probe for port 0x%lX done\n", ++ dev->base_addr); ++ return ret; ++ } ++ ++ iounmap((unsigned long *)dev->base_addr); ++fail_map: ++ release_mem_region(mem->start, mem_size); ++req_error: ++ free_candev(dev); ++ dev_err(&pdev->dev, "probe failed\n"); ++ return ret; ++} ++ ++static int __devexit mcf548x_can_remove(struct platform_device *pdev) ++{ ++ struct net_device *dev = platform_get_drvdata(pdev); ++ struct resource *mem; ++ ++ platform_set_drvdata(pdev, NULL); ++ unregister_flexcandev(dev); ++ iounmap((unsigned long *)dev->base_addr); ++ ++ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ release_mem_region(mem->start, mem->end - mem->start + 1); ++ free_candev(dev); ++ return 0; ++} ++ ++static struct platform_driver mcf548x_can_driver = { ++ .driver = { ++ .name = "mcf548x-flexcan", ++ }, ++ .probe = mcf548x_can_probe, ++ .remove = __devexit_p(mcf548x_can_remove), ++}; ++ ++static struct resource mcf548x_can0_resources[] = { ++ [0] = { ++ .start = MCF_MBAR + 0x0000A000, ++ .end = MCF_MBAR + 0x0000A7FF, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = 49, ++ .end = 49, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct resource mcf548x_can1_resources[] = { ++ [0] = { ++ .start = MCF_MBAR + 0x0000A800, ++ .end = MCF_MBAR + 0x0000AFFF, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = 55, ++ .end = 55, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++ ++static int __init mcf548x_of_to_pdev(void) ++{ ++ unsigned int i; ++ int err = -ENODEV; ++ struct flexcan_platform_data pdata; ++ ++ pdev[0] = platform_device_register_simple("mcf548x-flexcan", 0, ++ mcf548x_can0_resources, 2); ++ if (IS_ERR(pdev[0])) { ++ err = PTR_ERR(pdev[0]); ++ return err; ++ } ++ pdev[1] = platform_device_register_simple("mcf548x-flexcan", 1, ++ mcf548x_can1_resources, 2); ++ if (IS_ERR(pdev[1])) { ++ err = PTR_ERR(pdev[1]); ++ return err; ++ } ++ ++ /* FlexCAN clock */ ++ pdata.clock_frq = 100000000; ++ ++ for (i = 0; i < PDEV_MAX; i++) { ++ err = platform_device_add_data(pdev[i], &pdata, sizeof(pdata)); ++ if (err) ++ return err; ++ } ++ return err; ++} ++ ++int __init mcf548x_can_init(void) ++{ ++ int err = mcf548x_of_to_pdev(); ++ ++ if (err) { ++ printk(KERN_ERR "%s init failed with err=%d\n", ++ mcf548x_can_driver.driver.name, err); ++ return err; ++ } ++ ++ return platform_driver_register(&mcf548x_can_driver); ++} ++ ++void __exit mcf548x_can_exit(void) ++{ ++ int i; ++ platform_driver_unregister(&mcf548x_can_driver); ++ for (i = 0; i < PDEV_MAX; i++) ++ platform_device_unregister(pdev[i]); ++} ++ ++module_init(mcf548x_can_init); ++module_exit(mcf548x_can_exit); ++ ++MODULE_AUTHOR("Andrey Volkov <avolkov@varma-el.com>"); ++MODULE_DESCRIPTION("Freescale MCF548x CAN driver"); ++MODULE_LICENSE("GPL v2"); +--- a/drivers/net/can/Kconfig ++++ b/drivers/net/can/Kconfig +@@ -12,6 +12,19 @@ config CAN_VCAN + This driver can also be built as a module. If so, the module + will be called vcan. + ++config CAN_FLEXCAN ++ tristate "Support for Freescale FLEXCAN based chips" ++ depends on CAN && (PPC || M68K || M68KNOMMU) ++ ---help--- ++ Say Y here if you want to support for Freescale FlexCAN. ++ ++config CAN_MCF547X_8X ++ tristate "Freescale MCF547X/MCF548X onboard CAN controller" ++ depends on CAN_FLEXCAN && (M547X || M548X) ++ ---help--- ++ Say Y here if you want to support for Freescale MCF547x/MCF548x ++ onboard dualCAN controller. ++ + config CAN_DEBUG_DEVICES + bool "CAN devices debugging messages" + depends on CAN +--- a/drivers/net/can/Makefile ++++ b/drivers/net/can/Makefile +@@ -3,3 +3,4 @@ + # + + obj-$(CONFIG_CAN_VCAN) += vcan.o ++obj-$(CONFIG_CAN_FLEXCAN) += flexcan/ +--- /dev/null ++++ b/drivers/net/fec/fec.c +@@ -0,0 +1,1306 @@ ++/* ++ * Performance and stability improvements: (C) Copyright 2008, ++ * Daniel Krueger, SYSTEC electronic GmbH ++ * ++ * Code crunched to get it to work on 2.6.24 -- FEC cleanup coming ++ * soon -- Kurt Mahan ++ */ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/string.h> ++#include <linux/ptrace.h> ++#include <linux/errno.h> ++#include <linux/ioport.h> ++#include <linux/slab.h> ++#include <linux/interrupt.h> ++#include <linux/pci.h> ++#include <linux/init.h> ++#include <linux/delay.h> ++#include <linux/netdevice.h> ++#include <linux/etherdevice.h> ++#include <linux/skbuff.h> ++#include <linux/spinlock.h> ++#include <linux/workqueue.h> ++#include <linux/bitops.h> ++ ++#include <asm/coldfire.h> ++#include <asm/mcfsim.h> ++ ++#include <asm/dma.h> ++#include <asm/MCD_dma.h> ++#include <asm/m5485sram.h> ++#include <asm/virtconvert.h> ++#include <asm/irq.h> ++ ++#include "fec.h" ++#include "ks8721.h" ++ ++#ifdef CONFIG_FEC_548x_ENABLE_FEC2 ++#define FEC_MAX_PORTS 2 ++#define FEC_2 ++#else ++#define FEC_MAX_PORTS 1 ++#undef FEC_2 ++#endif ++ ++#define VERSION "0.20" ++MODULE_DESCRIPTION( "DMA Fast Ethernet Controller driver ver " VERSION); ++ ++/* fec private */ ++struct fec_priv { ++ struct net_device *netdev; /* owning net device */ ++ void* fecpriv_txbuf[FEC_TX_BUF_NUMBER]; /* tx buffer ptrs */ ++ MCD_bufDescFec *fecpriv_txdesc; /* tx descriptor ptrs */ ++ volatile unsigned int fecpriv_current_tx; /* current tx desc index */ ++ volatile unsigned int fecpriv_next_tx; /* next tx desc index */ ++ unsigned int fecpriv_current_rx; /* current rx desc index */ ++ MCD_bufDescFec *fecpriv_rxdesc; /* rx descriptor ptrs */ ++ struct sk_buff *askb_rx[FEC_RX_BUF_NUMBER]; /* rx SKB ptrs */ ++ unsigned int fecpriv_initiator_rx; /* rx dma initiator */ ++ unsigned int fecpriv_initiator_tx; /* tx dma initiator */ ++ int fecpriv_fec_rx_channel; /* rx dma channel */ ++ int fecpriv_fec_tx_channel; /* tx dma channel */ ++ int fecpriv_rx_requestor; /* rx dma requestor */ ++ int fecpriv_tx_requestor; /* tx dma requestor */ ++ void *fecpriv_interrupt_fec_rx_handler; /* dma rx handler */ ++ void *fecpriv_interrupt_fec_tx_handler; /* dma tx handler */ ++ unsigned char *fecpriv_mac_addr; /* private fec mac addr */ ++ struct net_device_stats fecpriv_stat; /* stats ptr */ ++ spinlock_t fecpriv_lock; ++ int fecpriv_rxflag; ++ struct tasklet_struct fecpriv_tasklet_reinit; ++ int index; /* fec hw number */ ++}; ++ ++struct net_device *fec_dev[FEC_MAX_PORTS]; ++ ++/* FEC functions */ ++int __init fec_init(void); ++struct net_device_stats *fec_get_stat(struct net_device *dev); ++int fec_open(struct net_device *dev); ++int fec_close(struct net_device *nd); ++int fec_tx(struct sk_buff *skb, struct net_device *dev); ++void fec_set_multicast_list(struct net_device *nd); ++int fec_set_mac_address(struct net_device *dev, void *p); ++void fec_tx_timeout(struct net_device *dev); ++void fec_interrupt_fec_tx_handler(struct net_device *dev); ++void fec_interrupt_fec_rx_handler(struct net_device *dev); ++irqreturn_t fec_interrupt_handler(int irq, void *dev_id); ++void fec_interrupt_fec_tx_handler_fec0(void); ++void fec_interrupt_fec_rx_handler_fec0(void); ++void fec_interrupt_fec_reinit(unsigned long data); ++ ++/* default fec0 address */ ++unsigned char fec_mac_addr_fec0[6] = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x50 }; ++ ++#ifdef FEC_2 ++/* default fec1 address */ ++unsigned char fec_mac_addr_fec1[6] = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x51 }; ++#endif ++ ++extern unsigned char uboot_enet0[]; ++extern unsigned char uboot_enet1[]; ++ ++#ifndef MODULE ++int fec_str_to_mac( char *str_mac, unsigned char* addr); ++int __init fec_mac_setup0 (char *s); ++#endif ++ ++ ++#ifdef FEC_2 ++void fec_interrupt_fec_tx_handler_fec1(void); ++void fec_interrupt_fec_rx_handler_fec1(void); ++#endif ++ ++#ifndef MODULE ++int __init fec_mac_setup1 (char *s); ++#endif ++ ++int fec_read_mii(unsigned int base_addr, unsigned int pa, unsigned int ra, unsigned int *data); ++int fec_write_mii(unsigned int base_addr, unsigned int pa, unsigned int ra, unsigned int data); ++ ++module_init(fec_init); ++/* module_exit(fec_cleanup); */ ++ ++__setup("mac0=", fec_mac_setup0); ++ ++#ifdef FEC_2 ++__setup("mac1=", fec_mac_setup1); ++#endif ++ ++/* ++ * Initialize a FEC device ++ */ ++int fec_enet_init(struct net_device *dev) ++{ ++ static int index = 0; ++ struct fec_priv *fp = netdev_priv(dev); ++ int i; ++ ++ fp->index = index; ++ fp->netdev = dev; ++ fec_dev[ index ] = dev; ++ ++ if (index == 0) { ++ /* disable fec0 */ ++ FEC_ECR(FEC_BASE_ADDR_FEC0) = FEC_ECR_DISABLE; ++ ++ /* setup the interrupt handler */ ++ dev->irq = 64 + ISC_FEC0; ++ ++ if (request_irq(dev->irq, fec_interrupt_handler, ++ IRQF_DISABLED, "ColdFire FEC 0", dev)) { ++ dev->irq = 0; ++ printk("Cannot allocate FEC0 IRQ\n"); ++ } else { ++ /* interrupt priority and level */ ++ MCF_ICR(ISC_FEC0) = ILP_FEC0; ++ } ++ ++ /* fec base address */ ++ dev->base_addr = FEC_BASE_ADDR_FEC0; ++ ++ /* requestor numbers */ ++ fp->fecpriv_rx_requestor = DMA_FEC0_RX; ++ fp->fecpriv_tx_requestor = DMA_FEC0_TX; ++ ++ /* fec0 handlers */ ++ fp->fecpriv_interrupt_fec_rx_handler = fec_interrupt_fec_rx_handler_fec0; ++ fp->fecpriv_interrupt_fec_tx_handler = fec_interrupt_fec_tx_handler_fec0; ++ ++ /* tx descriptors */ ++ fp->fecpriv_txdesc = (void*)FEC_TX_DESC_FEC0; ++ ++ /* rx descriptors */ ++ fp->fecpriv_rxdesc = (void*)FEC_RX_DESC_FEC0; ++ ++ /* mac addr */ ++ if (uboot_enet0[0] || uboot_enet0[1] || uboot_enet0[2] || ++ uboot_enet0[3] || uboot_enet0[4] || uboot_enet0[5]) { ++ /* use uboot enet 0 addr */ ++ memcpy(fec_mac_addr_fec0, uboot_enet0, 6); ++ } ++ ++ fp->fecpriv_mac_addr = fec_mac_addr_fec0; ++ } ++ else { ++ /* disable fec1 */ ++ FEC_ECR(FEC_BASE_ADDR_FEC1) = FEC_ECR_DISABLE; ++#ifdef FEC_2 ++ /* setup the interrupt handler */ ++ dev->irq = 64 + ISC_FEC1; ++ ++ if (request_irq(dev->irq, fec_interrupt_handler, ++ IRQF_DISABLED, "ColdFire FEC 1", dev)) { ++ dev->irq = 0; ++ printk("Cannot allocate FEC1 IRQ\n"); ++ } else { ++ /* interrupt priority and level */ ++ MCF_ICR(ISC_FEC1) = ILP_FEC1; ++ } ++ ++ /* fec base address */ ++ dev->base_addr = FEC_BASE_ADDR_FEC1; ++ ++ /* requestor numbers */ ++ fp->fecpriv_rx_requestor = DMA_FEC1_RX; ++ fp->fecpriv_tx_requestor = DMA_FEC1_TX; ++ ++ /* fec1 handlers */ ++ fp->fecpriv_interrupt_fec_rx_handler = fec_interrupt_fec_rx_handler_fec1; ++ fp->fecpriv_interrupt_fec_tx_handler = fec_interrupt_fec_tx_handler_fec1; ++ ++ /* tx descriptors */ ++ fp->fecpriv_txdesc = (void*)FEC_TX_DESC_FEC1; ++ ++ /* rx descriptors */ ++ fp->fecpriv_rxdesc = (void*)FEC_RX_DESC_FEC1; ++ ++ /* mac addr */ ++ if (uboot_enet1[0] || uboot_enet1[1] || uboot_enet1[2] || ++ uboot_enet1[3] || uboot_enet1[4] || uboot_enet1[5]) { ++ /* use uboot enet 1 addr */ ++ memcpy(fec_mac_addr_fec1, uboot_enet1, 6); ++ } ++ fp->fecpriv_mac_addr = fec_mac_addr_fec1; ++#endif ++ } ++ ++ /* clear MIB */ ++ memset((void *) (dev->base_addr + 0x200), 0, FEC_MIB_LEN); ++ ++ /* clear the statistics structure */ ++ memset((void *) &(fp->fecpriv_stat), 0, ++ sizeof(struct net_device_stats)); ++ ++ /* grab the FEC initiators */ ++ dma_set_initiator(fp->fecpriv_tx_requestor); ++ fp->fecpriv_initiator_tx = dma_get_initiator(fp->fecpriv_tx_requestor); ++ dma_set_initiator(fp->fecpriv_rx_requestor); ++ fp->fecpriv_initiator_rx = dma_get_initiator(fp->fecpriv_rx_requestor); ++ ++ /* reset the DMA channels */ ++ fp->fecpriv_fec_rx_channel = -1; ++ fp->fecpriv_fec_tx_channel = -1; ++ ++ for (i = 0; i < FEC_RX_BUF_NUMBER; i++) ++ fp->askb_rx[i] = NULL; ++ ++ /* initialize the pointers to the socket buffers */ ++ for (i = 0; i < FEC_TX_BUF_NUMBER; i++) ++ fp->fecpriv_txbuf[i] = NULL; ++ ++ ether_setup(dev); ++ ++ dev->open = fec_open; ++ dev->stop = fec_close; ++ dev->hard_start_xmit = fec_tx; ++ dev->get_stats = fec_get_stat; ++ dev->set_multicast_list = fec_set_multicast_list; ++ dev->set_mac_address = fec_set_mac_address; ++ dev->tx_timeout = fec_tx_timeout; ++ dev->watchdog_timeo = FEC_TX_TIMEOUT * HZ; ++ ++ memcpy(dev->dev_addr, fp->fecpriv_mac_addr, ETH_ALEN); ++ ++ spin_lock_init(&fp->fecpriv_lock); ++ ++ // Initialize FEC/I2C/IRQ Pin Assignment Register ++ FEC_GPIO_PAR_FECI2CIRQ &= 0xF; ++ FEC_GPIO_PAR_FECI2CIRQ |= FEC_FECI2CIRQ; ++ ++ index++; ++ return 0; ++} ++ ++/* ++ * Module Initialization ++ */ ++int __init fec_init(void) ++{ ++ struct net_device *dev; ++ int i; ++ int err; ++ DECLARE_MAC_BUF(mac); ++ ++ printk(KERN_INFO "FEC ENET (DMA) Version %s\n", VERSION); ++ ++ for (i = 0; i < FEC_MAX_PORTS; i++) { ++ dev = alloc_etherdev(sizeof(struct fec_priv)); ++ if (!dev) ++ return -ENOMEM; ++ err = fec_enet_init(dev); ++ if (err) { ++ free_netdev(dev); ++ continue; ++ } ++ if (register_netdev(dev) != 0) { ++ free_netdev(dev); ++ return -EIO; ++ } ++ ++ printk(KERN_INFO "%s: ethernet %s\n", ++ dev->name, print_mac(mac, dev->dev_addr)); ++ } ++ return 0; ++} ++ ++/* ++ * Stop a device ++ */ ++void fec_stop(struct net_device *dev) ++{ ++ struct fec_priv *fp = netdev_priv(dev); ++ ++ dma_remove_initiator(fp->fecpriv_initiator_tx); ++ dma_remove_initiator(fp->fecpriv_initiator_rx); ++ ++ if (dev->irq) ++ free_irq(dev->irq, dev); ++} ++ ++/************************************************************************ ++* NAME: fec_open ++* ++* DESCRIPTION: This function performs the initialization of ++* of FEC and corresponding KS8721 transiver ++* ++* RETURNS: If no error occurs, this function returns zero. ++*************************************************************************/ ++int fec_open(struct net_device *dev) ++{ ++ struct fec_priv *fp = netdev_priv(dev); ++ unsigned long base_addr = (unsigned long) dev->base_addr; ++ int fduplex; ++ int i; ++ int channel; ++ int error_code = -EBUSY; ++ ++ /* Receive the DMA channels */ ++ channel = dma_set_channel_fec(fp->fecpriv_rx_requestor); ++ ++ if (channel == -1) { ++ printk("Dma channel cannot be reserved\n"); ++ goto ERRORS; ++ } ++ ++ fp->fecpriv_fec_rx_channel = channel; ++ ++ dma_connect(channel, (int) fp->fecpriv_interrupt_fec_rx_handler); ++ ++ channel = dma_set_channel_fec(fp->fecpriv_tx_requestor); ++ ++ if (channel == -1) { ++ printk("Dma channel cannot be reserved\n"); ++ goto ERRORS; ++ } ++ ++ fp->fecpriv_fec_tx_channel = channel; ++ ++ dma_connect(channel, (int) fp->fecpriv_interrupt_fec_tx_handler); ++ ++ /* init tasklet for controller reinitialization */ ++ tasklet_init(&fp->fecpriv_tasklet_reinit, fec_interrupt_fec_reinit, (unsigned long) dev); ++ ++ /* Reset FIFOs */ ++ FEC_FECFRST(base_addr) |= FEC_SW_RST | FEC_RST_CTL; ++ FEC_FECFRST(base_addr) &= ~FEC_SW_RST; ++ ++ /* Reset and disable FEC */ ++ FEC_ECR(base_addr) = FEC_ECR_RESET; ++ ++ udelay(10); ++ ++ /* Clear all events */ ++ FEC_EIR(base_addr) = FEC_EIR_CLEAR; ++ ++ /* Reset FIFO status */ ++ FEC_FECTFSR(base_addr) = FEC_FECTFSR_MSK; ++ FEC_FECRFSR(base_addr) = FEC_FECRFSR_MSK; ++ ++ /* Set the default address */ ++ FEC_PALR(base_addr) = (fp->fecpriv_mac_addr[0] << 24) | ++ (fp->fecpriv_mac_addr[1] << 16) | ++ (fp->fecpriv_mac_addr[2] << 8) | ++ fp->fecpriv_mac_addr[3]; ++ FEC_PAUR(base_addr) = (fp->fecpriv_mac_addr[4] << 24) | ++ (fp->fecpriv_mac_addr[5] << 16) | 0x8808; ++ ++ /* Reset the group address descriptor */ ++ FEC_GALR(base_addr) = 0x00000000; ++ FEC_GAUR(base_addr) = 0x00000000; ++ ++ /* Reset the individual address descriptor */ ++ FEC_IALR(base_addr) = 0x00000000; ++ FEC_IAUR(base_addr) = 0x00000000; ++ ++ /* Set the receive control register */ ++ FEC_RCR(base_addr) = FEC_RCR_MAX_FRM_SIZE | FEC_RCR_MII; ++ ++ /* Set the receive FIFO control register */ ++// FEC_FECRFCR(base_addr) = FEC_FECRFCR_FRM | FEC_FECRFCR_GR | FEC_FECRFCR_MSK; ++ FEC_FECRFCR(base_addr) = FEC_FECRFCR_FRM | FEC_FECRFCR_GR ++ | (FEC_FECRFCR_MSK // disable all but ... ++ & ~FEC_FECRFCR_FAE // enable frame accept error ++ & ~FEC_FECRFCR_RXW // enable receive wait condition ++// & ~FEC_FECRFCR_UF // enable FIFO underflow ++ ); ++ ++ /* Set the receive FIFO alarm register */ ++ FEC_FECRFAR(base_addr) = FEC_FECRFAR_ALARM; ++ ++ /* Set the transmit FIFO control register */ ++// FEC_FECTFCR(base_addr) = FEC_FECTFCR_FRM | FEC_FECTFCR_GR | FEC_FECTFCR_MSK; ++ FEC_FECTFCR(base_addr) = FEC_FECTFCR_FRM | FEC_FECTFCR_GR ++ | (FEC_FECTFCR_MSK // disable all but ... ++ & ~FEC_FECTFCR_FAE // enable frame accept error ++// & ~FEC_FECTFCR_TXW // enable transmit wait condition ++// & ~FEC_FECTFCR_UF // enable FIFO underflow ++ & ~FEC_FECTFCR_OF); // enable FIFO overflow ++ ++ /* Set the transmit FIFO alarm register */ ++ FEC_FECTFAR(base_addr) = FEC_FECTFAR_ALARM; ++ ++ /* Set the Tx FIFO watermark */ ++ FEC_FECTFWR(base_addr) = FEC_FECTFWR_XWMRK; ++ ++ /* Enable the transmitter to append the CRC */ ++ FEC_CTCWR(base_addr) = FEC_CTCWR_TFCW_CRC; ++ ++ /* Enable the ethernet interrupts */ ++// FEC_EIMR(base_addr) = FEC_EIMR_MASK; ++ FEC_EIMR(base_addr) = FEC_EIMR_DISABLE ++ | FEC_EIR_LC ++ | FEC_EIR_RL ++ | FEC_EIR_HBERR ++ | FEC_EIR_XFUN ++ | FEC_EIR_XFERR ++ | FEC_EIR_RFERR ++ ; ++ ++/* ++ * JKM -- ++ * ++ * There's a problem with the PHY initialization code -- ++ * for now assume uboot left it in an initialized state. ++ */ ++// printk(KERN_INFO "FECOPEN: starting auto-negotiation\n"); ++// #ifdef CONFIG_FEC_548x_AUTO_NEGOTIATION ++#if 0 ++ if ((error_code = init_transceiver(base_addr, &fduplex)) != 0) ++ { ++ printk("Initialization of the transceiver is failed\n"); ++ goto ERRORS; ++ } ++#else ++ fduplex = 1; ++#endif ++// printk(KERN_INFO "FECOPEN: done with auto-negotiation\n"); ++ ++ if (fduplex) ++ /* Enable the full duplex mode */ ++ FEC_TCR(base_addr) = FEC_TCR_FDEN | FEC_TCR_HBC; ++ else ++ /* Disable reception of frames while transmitting */ ++ FEC_RCR(base_addr) |= FEC_RCR_DRT; ++ ++ /* Enable MIB */ ++ FEC_MIBC(base_addr) = FEC_MIBC_ENABLE; ++ ++ /* Enable FEC */ ++ FEC_ECR(base_addr) |= FEC_ECR_ETHEREN; ++ ++ /* Initialize tx descriptors and start DMA for the transmission */ ++ for (i = 0; i < FEC_TX_BUF_NUMBER; i++) ++ fp->fecpriv_txdesc[i].statCtrl = MCD_FEC_INTERRUPT; ++ ++ fp->fecpriv_txdesc[i - 1].statCtrl |= MCD_FEC_WRAP; ++ ++ fp->fecpriv_current_tx = fp->fecpriv_next_tx = 0; ++ ++ MCD_startDma(fp->fecpriv_fec_tx_channel, (char *) fp->fecpriv_txdesc, 0, ++ (unsigned char *) &(FEC_FECTFDR(base_addr)), 0, ++ FEC_MAX_FRM_SIZE, 0, fp->fecpriv_initiator_tx, ++ FEC_TX_DMA_PRI, MCD_FECTX_DMA | MCD_INTERRUPT, ++ MCD_NO_CSUM | MCD_NO_BYTE_SWAP); ++ ++ /* Initialize rx descriptors and start DMA for the reception */ ++ for (i = 0; i < FEC_RX_BUF_NUMBER; i++) { ++ fp->askb_rx[i] = alloc_skb(FEC_MAXBUF_SIZE + 16, GFP_DMA); ++ if (!fp->askb_rx[i]) { ++ fp->fecpriv_rxdesc[i].dataPointer = 0; ++ fp->fecpriv_rxdesc[i].statCtrl = 0; ++ fp->fecpriv_rxdesc[i].length = 0; ++ } ++ else { ++ skb_reserve(fp->askb_rx[i], 16); ++ fp->askb_rx[i]->dev = dev; ++ fp->fecpriv_rxdesc[i].dataPointer = (unsigned int) virt_to_phys(fp->askb_rx[i]->tail); ++ fp->fecpriv_rxdesc[i].statCtrl = MCD_FEC_BUF_READY | MCD_FEC_INTERRUPT; ++ fp->fecpriv_rxdesc[i].length = FEC_MAXBUF_SIZE; ++ } ++ } ++ ++ fp->fecpriv_rxdesc[i - 1].statCtrl |= MCD_FEC_WRAP; ++ fp->fecpriv_current_rx = 0; ++ ++ /* flush entire data cache before restarting the DMA */ ++#if 0 ++/* JKM -- currently running with cache turned off */ ++ DcacheFlushInvalidate(); ++#endif ++ ++ MCD_startDma(fp->fecpriv_fec_rx_channel, (char *) fp->fecpriv_rxdesc, 0, ++ (unsigned char *) &(FEC_FECRFDR(base_addr)), 0, ++ FEC_MAX_FRM_SIZE, 0, fp->fecpriv_initiator_rx, ++ FEC_RX_DMA_PRI, MCD_FECRX_DMA | MCD_INTERRUPT, ++ MCD_NO_CSUM | MCD_NO_BYTE_SWAP); ++ ++ netif_start_queue(dev); ++ return 0; ++ ++ERRORS: ++ ++ /* Remove the channels and return with the error code */ ++ if (fp->fecpriv_fec_rx_channel != -1) { ++ dma_disconnect(fp->fecpriv_fec_rx_channel); ++ dma_remove_channel_by_number(fp->fecpriv_fec_rx_channel); ++ fp->fecpriv_fec_rx_channel = -1; ++ } ++ ++ if (fp->fecpriv_fec_tx_channel != -1) { ++ dma_disconnect(fp->fecpriv_fec_tx_channel); ++ dma_remove_channel_by_number(fp->fecpriv_fec_tx_channel); ++ fp->fecpriv_fec_tx_channel = -1; ++ } ++ ++ return error_code; ++} ++ ++/************************************************************************ ++* NAME: fec_close ++* ++* DESCRIPTION: This function performs the graceful stop of the ++* transmission and disables FEC ++* ++* RETURNS: This function always returns zero. ++*************************************************************************/ ++int fec_close(struct net_device *dev) ++{ ++ struct fec_priv *fp = netdev_priv(dev); ++ unsigned long base_addr = (unsigned long) dev->base_addr; ++ unsigned long time; ++ int i; ++ ++ netif_stop_queue(dev); ++ ++ /* Perform the graceful stop */ ++ FEC_TCR(base_addr) |= FEC_TCR_GTS; ++ ++ time = jiffies; ++ ++ /* Wait for the graceful stop */ ++ while (!(FEC_EIR(base_addr) & FEC_EIR_GRA) && jiffies - time < FEC_GR_TIMEOUT * HZ) ++ schedule(); ++ ++ /* Disable FEC */ ++ FEC_ECR(base_addr) = FEC_ECR_DISABLE; ++ ++ /* Reset the DMA channels */ ++ spin_lock_irq(&fp->fecpriv_lock); ++ MCD_killDma(fp->fecpriv_fec_tx_channel); ++ spin_unlock_irq(&fp->fecpriv_lock); ++ dma_remove_channel_by_number(fp->fecpriv_fec_tx_channel); ++ dma_disconnect(fp->fecpriv_fec_tx_channel); ++ fp->fecpriv_fec_tx_channel = -1; ++ ++ for (i = 0; i < FEC_TX_BUF_NUMBER; i++) { ++ if (fp->fecpriv_txbuf[i]) { ++ kfree(fp->fecpriv_txbuf[i]); ++ fp->fecpriv_txbuf[i] = NULL; ++ } ++ } ++ ++ spin_lock_irq(&fp->fecpriv_lock); ++ MCD_killDma(fp->fecpriv_fec_rx_channel); ++ spin_unlock_irq(&fp->fecpriv_lock); ++ ++ dma_remove_channel_by_number(fp->fecpriv_fec_rx_channel); ++ dma_disconnect(fp->fecpriv_fec_rx_channel); ++ fp->fecpriv_fec_rx_channel = -1; ++ ++ for (i = 0; i < FEC_RX_BUF_NUMBER; i++) { ++ if (fp->askb_rx[i]) { ++ kfree_skb(fp->askb_rx[i]); ++ fp->askb_rx[i] = NULL; ++ } ++ } ++ ++ return 0; ++} ++ ++/************************************************************************ ++* +NAME: fec_get_stat ++* ++* RETURNS: This function returns the statistical information. ++*************************************************************************/ ++struct net_device_stats * fec_get_stat(struct net_device *dev) ++{ ++ struct fec_priv *fp = netdev_priv(dev); ++ unsigned long base_addr = dev->base_addr; ++ ++ /* Receive the statistical information */ ++ fp->fecpriv_stat.rx_packets = FECSTAT_RMON_R_PACKETS(base_addr); ++ fp->fecpriv_stat.tx_packets = FECSTAT_RMON_T_PACKETS(base_addr); ++ fp->fecpriv_stat.rx_bytes = FECSTAT_RMON_R_OCTETS(base_addr); ++ fp->fecpriv_stat.tx_bytes = FECSTAT_RMON_T_OCTETS(base_addr); ++ ++ fp->fecpriv_stat.multicast = FECSTAT_RMON_R_MC_PKT(base_addr); ++ fp->fecpriv_stat.collisions = FECSTAT_RMON_T_COL(base_addr); ++ ++ fp->fecpriv_stat.rx_length_errors = FECSTAT_RMON_R_UNDERSIZE(base_addr) + ++ FECSTAT_RMON_R_OVERSIZE(base_addr) + ++ FECSTAT_RMON_R_FRAG(base_addr) + ++ FECSTAT_RMON_R_JAB(base_addr); ++ fp->fecpriv_stat.rx_crc_errors = FECSTAT_IEEE_R_CRC(base_addr); ++ fp->fecpriv_stat.rx_frame_errors = FECSTAT_IEEE_R_ALIGN(base_addr); ++ fp->fecpriv_stat.rx_over_errors = FECSTAT_IEEE_R_MACERR(base_addr); ++ ++ fp->fecpriv_stat.tx_carrier_errors = FECSTAT_IEEE_T_CSERR(base_addr); ++ fp->fecpriv_stat.tx_fifo_errors = FECSTAT_IEEE_T_MACERR(base_addr); ++ fp->fecpriv_stat.tx_window_errors = FECSTAT_IEEE_T_LCOL(base_addr); ++ ++ /* I hope that one frame doesn't have more than one error */ ++ fp->fecpriv_stat.rx_errors = fp->fecpriv_stat.rx_length_errors + ++ fp->fecpriv_stat.rx_crc_errors + ++ fp->fecpriv_stat.rx_frame_errors + ++ fp->fecpriv_stat.rx_over_errors + ++ fp->fecpriv_stat.rx_dropped; ++ fp->fecpriv_stat.tx_errors = fp->fecpriv_stat.tx_carrier_errors + ++ fp->fecpriv_stat.tx_fifo_errors + ++ fp->fecpriv_stat.tx_window_errors + ++ fp->fecpriv_stat.tx_aborted_errors + ++ fp->fecpriv_stat.tx_heartbeat_errors + ++ fp->fecpriv_stat.tx_dropped; ++ ++ return &fp->fecpriv_stat; ++} ++ ++/************************************************************************ ++* NAME: fec_set_multicast_list ++* ++* DESCRIPTION: This function sets the frame filtering parameters ++*************************************************************************/ ++void fec_set_multicast_list(struct net_device *dev) ++{ ++ struct dev_mc_list *dmi; ++ unsigned int crc, data; ++ int i, j, k; ++ unsigned long base_addr = (unsigned long) dev->base_addr; ++ ++ if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI) { ++ /* Allow all incoming frames */ ++ FEC_GALR(base_addr) = 0xFFFFFFFF; ++ FEC_GAUR(base_addr) = 0xFFFFFFFF; ++ return; ++ } ++ ++ /* Reset the group address register */ ++ FEC_GALR(base_addr) = 0x00000000; ++ FEC_GAUR(base_addr) = 0x00000000; ++ ++ /* Process all addresses */ ++ for (i = 0, dmi = dev->mc_list; i < dev->mc_count; i++, dmi = dmi->next) { ++ /* Processing must be only for the group addresses */ ++ if (!(dmi->dmi_addr[0] & 1)) ++ continue; ++ ++ /* Calculate crc value for the current address */ ++ crc = 0xFFFFFFFF; ++ for (j = 0; j < dmi->dmi_addrlen; j++) { ++ for (k = 0, data = dmi->dmi_addr[j]; k < 8; k++, data >>= 1) { ++ if ((crc ^ data) & 1) ++ crc = (crc >> 1) ^ FEC_CRCPOL; ++ else ++ crc >>= 1; ++ } ++ } ++ ++ /* Add this value */ ++ crc >>= 26; ++ crc &= 0x3F; ++ if (crc > 31) ++ FEC_GAUR(base_addr) |= 0x1 << (crc - 32); ++ else ++ FEC_GALR(base_addr) |= 0x1 << crc; ++ } ++} ++ ++/************************************************************************ ++* NAME: fec_set_mac_address ++* ++* DESCRIPTION: This function sets the MAC address ++*************************************************************************/ ++int fec_set_mac_address(struct net_device *dev, void *p) ++{ ++ struct fec_priv *fp = netdev_priv(dev); ++ unsigned long base_addr = (unsigned long) dev->base_addr; ++ struct sockaddr *addr = p; ++ ++ if (netif_running(dev)) ++ return -EBUSY; ++ ++ /* Copy a new address to the device structure */ ++ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); ++ ++ /* Copy a new address to the private structure */ ++ memcpy(fp->fecpriv_mac_addr, addr->sa_data, 6); ++ ++ /* Set the address to the registers */ ++ FEC_PALR(base_addr) = (fp->fecpriv_mac_addr[0] << 24) | ++ (fp->fecpriv_mac_addr[1] << 16) | ++ (fp->fecpriv_mac_addr[2] << 8) | ++ fp->fecpriv_mac_addr[3]; ++ FEC_PAUR(base_addr) = (fp->fecpriv_mac_addr[4] << 24) | ++ (fp->fecpriv_mac_addr[5] << 16) | ++ 0x8808; ++ ++ return 0; ++} ++ ++/************************************************************************ ++* NAME: fec_tx ++* ++* DESCRIPTION: This function starts transmission of the frame using DMA ++* ++* RETURNS: This function always returns zero. ++*************************************************************************/ ++int fec_tx(struct sk_buff *skb, struct net_device *dev) ++{ ++ struct fec_priv *fp = netdev_priv(dev); ++ void *data, *data_aligned; ++ int offset; ++ ++ data = kmalloc(skb->len + 15, GFP_DMA | GFP_ATOMIC); ++ ++ if (!data) { ++ fp->fecpriv_stat.tx_dropped++; ++ dev_kfree_skb(skb); ++ return 0; ++ } ++ ++ offset = (((unsigned long)virt_to_phys(data) + 15) & 0xFFFFFFF0) - ++ (unsigned long)virt_to_phys(data); ++ data_aligned = (void*)((unsigned long)data + offset); ++ memcpy(data_aligned, skb->data, skb->len); ++ ++ /* flush data cache before initializing the descriptor and starting DMA */ ++#if 0 ++/* JKM -- currently running with cache turned off */ ++ DcacheFlushInvalidateCacheBlock((void*)virt_to_phys(data_aligned), skb->len); ++#endif ++ ++ spin_lock_irq(&fp->fecpriv_lock); ++ ++ /* Initialize the descriptor */ ++ fp->fecpriv_txbuf[fp->fecpriv_next_tx] = data; ++ fp->fecpriv_txdesc[fp->fecpriv_next_tx].dataPointer = (unsigned int) virt_to_phys(data_aligned); ++ fp->fecpriv_txdesc[fp->fecpriv_next_tx].length = skb->len; ++ fp->fecpriv_txdesc[fp->fecpriv_next_tx].statCtrl |= (MCD_FEC_END_FRAME | MCD_FEC_BUF_READY); ++ fp->fecpriv_next_tx = (fp->fecpriv_next_tx + 1) & FEC_TX_INDEX_MASK; ++ ++ if (fp->fecpriv_txbuf[fp->fecpriv_current_tx] && fp->fecpriv_current_tx == fp->fecpriv_next_tx) ++ netif_stop_queue(dev); ++ ++ spin_unlock_irq(&fp->fecpriv_lock); ++ ++ /* Tell the DMA to continue the transmission */ ++ MCD_continDma(fp->fecpriv_fec_tx_channel); ++ ++ dev_kfree_skb(skb); ++ ++ dev->trans_start = jiffies; ++ ++ return 0; ++} ++ ++/************************************************************************ ++* NAME: fec_tx_timeout ++* ++* DESCRIPTION: If the interrupt processing of received frames was lost ++* and DMA stopped the reception, this function clears ++* the transmission descriptors and starts DMA ++* ++*************************************************************************/ ++void fec_tx_timeout(struct net_device *dev) ++{ ++ int i; ++ struct fec_priv *fp = netdev_priv(dev); ++ unsigned long base_addr = (unsigned long) dev->base_addr; ++ ++ spin_lock_irq(&fp->fecpriv_lock); ++ MCD_killDma(fp->fecpriv_fec_tx_channel); ++ for (i = 0; i < FEC_TX_BUF_NUMBER; i++) { ++ if (fp->fecpriv_txbuf[i]) { ++ kfree(fp->fecpriv_txbuf[i]); ++ fp->fecpriv_txbuf[i] = NULL; ++ } ++ fp->fecpriv_txdesc[i].statCtrl = MCD_FEC_INTERRUPT; ++ } ++ fp->fecpriv_txdesc[i - 1].statCtrl |= MCD_FEC_WRAP; ++ ++ fp->fecpriv_current_tx = fp->fecpriv_next_tx = 0; ++ ++ /* Reset FIFOs */ ++ FEC_FECFRST(base_addr) |= FEC_SW_RST; ++ FEC_FECFRST(base_addr) &= ~FEC_SW_RST; ++ ++ /* Reset and disable FEC */ ++// FEC_ECR(base_addr) = FEC_ECR_RESET; ++ ++ /* Enable FEC */ ++ FEC_ECR(base_addr) |= FEC_ECR_ETHEREN; ++ ++ MCD_startDma(fp->fecpriv_fec_tx_channel, (char *) fp->fecpriv_txdesc, 0, ++ (unsigned char *) &(FEC_FECTFDR(base_addr)), 0, ++ FEC_MAX_FRM_SIZE, 0, fp->fecpriv_initiator_tx, ++ FEC_TX_DMA_PRI, MCD_FECTX_DMA | MCD_INTERRUPT, ++ MCD_NO_CSUM | MCD_NO_BYTE_SWAP); ++ ++ spin_unlock_irq(&fp->fecpriv_lock); ++ ++ netif_wake_queue(dev); ++ ++} ++ ++/************************************************************************ ++* NAME: fec_read_mii ++* ++* DESCRIPTION: This function reads the value from the MII register ++* ++* RETURNS: If no error occurs, this function returns zero. ++*************************************************************************/ ++int fec_read_mii(unsigned int base_addr, unsigned int pa, unsigned int ra, unsigned int *data) ++{ ++ unsigned long time; ++ ++ /* Clear the MII interrupt bit */ ++ FEC_EIR(base_addr) = FEC_EIR_MII; ++ ++ /* Write to the MII management frame register */ ++ FEC_MMFR(base_addr) = FEC_MMFR_READ | (pa << 23) | (ra << 18); ++ ++ time = jiffies; ++ ++ /* Wait for the reading */ ++ while (!(FEC_EIR(base_addr) & FEC_EIR_MII)) { ++ if (jiffies - time > FEC_MII_TIMEOUT * HZ) ++ return -ETIME; ++ schedule(); ++ } ++ ++ /* Clear the MII interrupt bit */ ++ FEC_EIR(base_addr) = FEC_EIR_MII; ++ ++ *data = FEC_MMFR(base_addr) & 0x0000FFFF; ++ ++ return 0; ++} ++ ++/************************************************************************ ++* NAME: fec_write_mii ++* ++* DESCRIPTION: This function writes the value to the MII register ++* ++* RETURNS: If no error occurs, this function returns zero. ++*************************************************************************/ ++int fec_write_mii(unsigned int base_addr, unsigned int pa, unsigned int ra, unsigned int data) ++{ ++ unsigned long time; ++ ++ /* Clear the MII interrupt bit */ ++ FEC_EIR(base_addr) = FEC_EIR_MII; ++ ++ /* Write to the MII management frame register */ ++ FEC_MMFR(base_addr) = FEC_MMFR_WRITE | (pa << 23) | (ra << 18) | data; ++ ++ time = jiffies; ++ ++ /* Wait for the writing */ ++ while (!(FEC_EIR(base_addr) & FEC_EIR_MII)) { ++ if (jiffies - time > FEC_MII_TIMEOUT * HZ) ++ return -ETIME; ++ schedule(); ++ } ++ ++ /* Clear the MII interrupt bit */ ++ FEC_EIR(base_addr) = FEC_EIR_MII; ++ ++ return 0; ++} ++ ++/************************************************************************ ++* NAME: fec_interrupt_tx_handler ++* ++* DESCRIPTION: This function is called when the data ++* transmission from the buffer to the FEC is completed. ++* ++*************************************************************************/ ++void fec_interrupt_fec_tx_handler(struct net_device *dev) ++{ ++ struct fec_priv *fp = netdev_priv(dev); ++ ++ /* Release the socket buffer */ ++ if(fp->fecpriv_txbuf[fp->fecpriv_current_tx]) { ++ kfree(fp->fecpriv_txbuf[fp->fecpriv_current_tx]); ++ fp->fecpriv_txbuf[fp->fecpriv_current_tx] = NULL; ++ } ++ fp->fecpriv_current_tx = (fp->fecpriv_current_tx + 1) & FEC_TX_INDEX_MASK; ++ ++ if (MCD_dmaStatus(fp->fecpriv_fec_tx_channel) == MCD_DONE) { ++ for (; fp->fecpriv_current_tx != fp->fecpriv_next_tx; fp->fecpriv_current_tx = (fp->fecpriv_current_tx + 1) & FEC_TX_INDEX_MASK) { ++ if(fp->fecpriv_txbuf[fp->fecpriv_current_tx]) { ++ kfree(fp->fecpriv_txbuf[fp->fecpriv_current_tx]); ++ fp->fecpriv_txbuf[fp->fecpriv_current_tx] = NULL; ++ } ++ } ++ } ++ ++ if (netif_queue_stopped(dev)) ++ netif_wake_queue(dev); ++} ++ ++/************************************************************************ ++* NAME: fec_interrupt_rx_handler ++* ++* DESCRIPTION: This function is called when the data ++* reception from the FEC to the reception buffer is completed. ++* ++*************************************************************************/ ++void fec_interrupt_fec_rx_handler(struct net_device *dev) ++{ ++ struct fec_priv *fp = netdev_priv(dev); ++ struct sk_buff *skb; ++ int i; ++ ++ fp->fecpriv_rxflag = 1; ++ // Some buffers can be missed ++ if(!(fp->fecpriv_rxdesc[fp->fecpriv_current_rx].statCtrl & MCD_FEC_END_FRAME)) ++ { ++ // Find a valid index ++ for(i = 0; i < FEC_RX_BUF_NUMBER && !(fp->fecpriv_rxdesc[fp->fecpriv_current_rx].statCtrl & MCD_FEC_END_FRAME); i++, fp->fecpriv_current_rx = (fp->fecpriv_current_rx + 1) & FEC_RX_INDEX_MASK); ++ ++ if(i == FEC_RX_BUF_NUMBER) ++ { ++ // There are no data to process ++ // Tell the DMA to continue the reception ++ MCD_continDma(fp->fecpriv_fec_rx_channel); ++ ++ fp->fecpriv_rxflag = 0; ++ ++ return; ++ } ++ } ++ ++ for (; fp->fecpriv_rxdesc[fp->fecpriv_current_rx].statCtrl & MCD_FEC_END_FRAME; fp->fecpriv_current_rx = (fp->fecpriv_current_rx + 1) & FEC_RX_INDEX_MASK) { ++ if( (fp->fecpriv_rxdesc[fp->fecpriv_current_rx].length <= FEC_MAXBUF_SIZE) && ++ (fp->fecpriv_rxdesc[fp->fecpriv_current_rx].length > 4)) { /* --tym-- */ ++ skb = fp->askb_rx[fp->fecpriv_current_rx]; ++ if (!skb) ++ fp->fecpriv_stat.rx_dropped++; ++ else { ++ /* flush data cache before initializing the descriptor and starting DMA */ ++// DcacheFlushInvalidateCacheBlock((void*)virt_to_phys(fp->askb_rx[fp->fecpriv_current_rx]->tail), fp->askb_rx[fp->fecpriv_current_rx]->len); ++ ++ skb_put(skb, fp->fecpriv_rxdesc[fp->fecpriv_current_rx].length - 4); ++ skb->protocol = eth_type_trans(skb, dev); ++ netif_rx(skb); ++ } ++ fp->fecpriv_rxdesc[fp->fecpriv_current_rx].statCtrl &= ~MCD_FEC_END_FRAME; ++ /* allocate new skbuff */ ++ fp->askb_rx[fp->fecpriv_current_rx] = alloc_skb(FEC_MAXBUF_SIZE + 16, /*GFP_ATOMIC |*/ GFP_DMA); ++ if (!fp->askb_rx[fp->fecpriv_current_rx]) { ++ fp->fecpriv_rxdesc[fp->fecpriv_current_rx].dataPointer = 0; ++ fp->fecpriv_rxdesc[fp->fecpriv_current_rx].length = 0; ++ fp->fecpriv_stat.rx_dropped++; ++ } ++ else { ++ skb_reserve(fp->askb_rx[fp->fecpriv_current_rx], 16); ++ fp->askb_rx[fp->fecpriv_current_rx]->dev = dev; ++ ++ /* flush data cache before initializing the descriptor and starting DMA */ ++#if 0 ++/* JKM -- currently running with cache turned off */ ++ DcacheFlushInvalidateCacheBlock((void*)virt_to_phys(fp->askb_rx[fp->fecpriv_current_rx]->tail), FEC_MAXBUF_SIZE); ++#endif ++ ++ fp->fecpriv_rxdesc[fp->fecpriv_current_rx].dataPointer = (unsigned int) virt_to_phys(fp->askb_rx[fp->fecpriv_current_rx]->tail); ++ fp->fecpriv_rxdesc[fp->fecpriv_current_rx].length = FEC_MAXBUF_SIZE; ++ fp->fecpriv_rxdesc[fp->fecpriv_current_rx].statCtrl |= MCD_FEC_BUF_READY; ++ ++ // flush data cache before initializing the descriptor and starting DMA ++// DcacheFlushInvalidateCacheBlock((void*)virt_to_phys(fp->askb_rx[fp->fecpriv_current_rx]->tail), FEC_MAXBUF_SIZE); ++ } ++ } ++ ++ } ++ ++ /* Tell the DMA to continue the reception */ ++ MCD_continDma(fp->fecpriv_fec_rx_channel); ++ ++ fp->fecpriv_rxflag = 0; ++} ++ ++/************************************************************************ ++* NAME: fec_interrupt_handler ++* ++* DESCRIPTION: This function is called when some special errors occur ++* ++*************************************************************************/ ++irqreturn_t fec_interrupt_handler(int irq, void *dev_id) ++{ ++ ++ struct net_device *dev = (struct net_device *)dev_id; ++ struct fec_priv *fp = netdev_priv(dev); ++ unsigned long base_addr = (unsigned long) dev->base_addr; ++ unsigned long events; ++ ++ /* Read and clear the events */ ++ events = FEC_EIR(base_addr) & FEC_EIMR(base_addr); ++ ++ if (events & FEC_EIR_HBERR) { ++ fp->fecpriv_stat.tx_heartbeat_errors++; ++ FEC_EIR(base_addr) = FEC_EIR_HBERR; ++ } ++ ++ /* receive/transmit FIFO error */ ++ if (((events & FEC_EIR_RFERR) != 0) || ((events & FEC_EIR_XFERR) != 0)) { ++ /* kill DMA receive channel */ ++ MCD_killDma (fp->fecpriv_fec_rx_channel); ++ ++ /* kill running transmission by DMA */ ++ MCD_killDma (fp->fecpriv_fec_tx_channel); ++ ++ /* Reset FIFOs */ ++ FEC_FECFRST(base_addr) |= FEC_SW_RST; ++ FEC_FECFRST(base_addr) &= ~FEC_SW_RST; ++ ++ /* reset receive FIFO status register */ ++ FEC_FECRFSR(base_addr) = FEC_FECRFSR_FAE | ++ FEC_FECRFSR_RXW | ++ FEC_FECRFSR_UF; ++ ++ /* reset transmit FIFO status register */ ++ FEC_FECTFSR(base_addr) = FEC_FECTFSR_FAE | ++ FEC_FECTFSR_TXW | ++ FEC_FECTFSR_UF | ++ FEC_FECTFSR_OF; ++ ++ /* reset RFERR and XFERR event */ ++ FEC_EIR(base_addr) = FEC_EIR_RFERR | FEC_EIR_XFERR; ++ ++ /* stop queue */ ++ netif_stop_queue(dev); ++ ++ /* execute reinitialization as tasklet */ ++ tasklet_schedule(&fp->fecpriv_tasklet_reinit); ++ ++ fp->fecpriv_stat.rx_dropped++; ++ } ++ ++ /* transmit FIFO underrun */ ++ if ((events & FEC_EIR_XFUN) != 0) { ++ /* reset XFUN event */ ++ FEC_EIR(base_addr) = FEC_EIR_XFUN; ++ fp->fecpriv_stat.tx_aborted_errors++; ++ } ++ ++ /* late collision */ ++ if ((events & FEC_EIR_LC) != 0) { ++ /* reset LC event */ ++ FEC_EIR(base_addr) = FEC_EIR_LC; ++ fp->fecpriv_stat.tx_aborted_errors++; ++ } ++ ++ /* collision retry limit */ ++ if ((events & FEC_EIR_RL) != 0) { ++ /* reset RL event */ ++ FEC_EIR(base_addr) = FEC_EIR_RL; ++ fp->fecpriv_stat.tx_aborted_errors++; ++ } ++ return 0; ++} ++ ++/************************************************************************ ++* NAME: fec_interrupt_reinit ++* ++* DESCRIPTION: This function is called from interrupt handler ++* when controller must be reinitialized. ++* ++*************************************************************************/ ++void fec_interrupt_fec_reinit(unsigned long data) ++{ ++ int i; ++ struct net_device *dev = (struct net_device*)data; ++ struct fec_priv *fp = netdev_priv(dev); ++ unsigned long base_addr = (unsigned long) dev->base_addr; ++ ++ /* Initialize reception descriptors and start DMA for the reception */ ++ for (i = 0; i < FEC_RX_BUF_NUMBER; i++) { ++ if (!fp->askb_rx[i]) { ++ fp->askb_rx[i] = alloc_skb(FEC_MAXBUF_SIZE + 16, GFP_ATOMIC | GFP_DMA); ++ if (!fp->askb_rx[i]) { ++ fp->fecpriv_rxdesc[i].dataPointer = 0; ++ fp->fecpriv_rxdesc[i].statCtrl = 0; ++ fp->fecpriv_rxdesc[i].length = 0; ++ continue; ++ } ++ fp->askb_rx[i]->dev = dev; ++ skb_reserve(fp->askb_rx[i], 16); ++ } ++ fp->fecpriv_rxdesc[i].dataPointer = (unsigned int) virt_to_phys(fp->askb_rx[i]->tail); ++ fp->fecpriv_rxdesc[i].statCtrl = MCD_FEC_BUF_READY | MCD_FEC_INTERRUPT; ++ fp->fecpriv_rxdesc[i].length = FEC_MAXBUF_SIZE; ++ } ++ ++ fp->fecpriv_rxdesc[i - 1].statCtrl |= MCD_FEC_WRAP; ++ fp->fecpriv_current_rx = 0; ++ ++ /* restart frame transmission */ ++ for (i = 0; i < FEC_TX_BUF_NUMBER; i++) { ++ if (fp->fecpriv_txbuf[i]) { ++ kfree(fp->fecpriv_txbuf[i]); ++ fp->fecpriv_txbuf[i] = NULL; ++ fp->fecpriv_stat.tx_dropped++; ++ } ++ fp->fecpriv_txdesc[i].statCtrl = MCD_FEC_INTERRUPT; ++ } ++ fp->fecpriv_txdesc[i - 1].statCtrl |= MCD_FEC_WRAP; ++ fp->fecpriv_current_tx = fp->fecpriv_next_tx = 0; ++ ++ /* flush entire data cache before restarting the DMA */ ++#if 0 ++/* JKM -- currently running with cache turned off */ ++ DcacheFlushInvalidate(); ++#endif ++ ++ /* restart DMA from beginning */ ++ MCD_startDma(fp->fecpriv_fec_rx_channel, ++ (char *) fp->fecpriv_rxdesc, 0, ++ (unsigned char *) &(FEC_FECRFDR(base_addr)), 0, ++ FEC_MAX_FRM_SIZE, 0, fp->fecpriv_initiator_rx, ++ FEC_RX_DMA_PRI, MCD_FECRX_DMA | MCD_INTERRUPT, ++ MCD_NO_CSUM | MCD_NO_BYTE_SWAP); ++ ++ MCD_startDma(fp->fecpriv_fec_tx_channel, (char *) fp->fecpriv_txdesc, 0, ++ (unsigned char *) &(FEC_FECTFDR(base_addr)), 0, ++ FEC_MAX_FRM_SIZE, 0, fp->fecpriv_initiator_tx, ++ FEC_TX_DMA_PRI, MCD_FECTX_DMA | MCD_INTERRUPT, ++ MCD_NO_CSUM | MCD_NO_BYTE_SWAP); ++ ++ /* Enable FEC */ ++ FEC_ECR(base_addr) |= FEC_ECR_ETHEREN; ++ ++ netif_wake_queue(dev); ++} ++ ++/************************************************************************ ++* NAME: fec_interrupt_tx_handler_fec0 ++* ++* DESCRIPTION: This is the DMA interrupt handler using for FEC0 ++* transmission. ++* ++*************************************************************************/ ++void fec_interrupt_fec_tx_handler_fec0(void) ++{ ++ fec_interrupt_fec_tx_handler(fec_dev[0]); ++} ++ ++#ifdef FEC_2 ++/************************************************************************ ++* NAME: fec_interrupt_tx_handler_fec1 ++* ++* DESCRIPTION: This is the DMA interrupt handler using for the FEC1 ++* transmission. ++* ++*************************************************************************/ ++void fec_interrupt_fec_tx_handler_fec1(void) ++{ ++ fec_interrupt_fec_tx_handler(fec_dev[1]); ++} ++#endif ++ ++/************************************************************************ ++* NAME: fec_interrupt_rx_handler_fec0 ++* ++* DESCRIPTION: This is the DMA interrupt handler using for the FEC0 ++* reception. ++* ++*************************************************************************/ ++void fec_interrupt_fec_rx_handler_fec0(void) ++{ ++ fec_interrupt_fec_rx_handler(fec_dev[0]); ++} ++ ++#ifdef FEC_2 ++/************************************************************************ ++* NAME: fec_interrupt_rx_handler_fec1 ++* ++* DESCRIPTION: This is the DMA interrupt handler using for the FEC1 ++* reception. ++* ++*************************************************************************/ ++void fec_interrupt_fec_rx_handler_fec1(void) ++{ ++ fec_interrupt_fec_rx_handler(fec_dev[1]); ++} ++ ++#endif ++ ++#ifndef MODULE ++/************************************************************************ ++* NAME: fec_mac_setup0 ++* ++* DESCRIPTION: This function sets the MAC address of FEC0 from command line ++* ++*************************************************************************/ ++int __init fec_mac_setup0(char *s) ++{ ++ if(!s || !*s) ++ return 1; ++ ++ if(fec_str_to_mac(s, fec_mac_addr_fec0)) ++ printk("The MAC address of FEC0 cannot be set from command line"); ++ return 1; ++} ++ ++#ifdef FEC_2 ++ ++/************************************************************************ ++* NAME: fec_mac_setup1 ++* ++* DESCRIPTION: This function sets the MAC address of FEC1 from command line ++* ++*************************************************************************/ ++int __init fec_mac_setup1(char *s) ++{ ++ if(!s || !*s) ++ return 1; ++ ++ if(fec_str_to_mac(s, fec_mac_addr_fec1)) ++ printk("The MAC address of FEC1 cannot be set from command line"); ++ return 1; ++} ++#endif ++ ++/************************************************************************ ++* NAME: fec_str_to_mac ++* ++* DESCRIPTION: This function interprets the character string into MAC addr ++* ++*************************************************************************/ ++int fec_str_to_mac( char *str_mac, unsigned char* addr) ++{ ++ unsigned long val; ++ char c; ++ unsigned long octet[6], *octetptr = octet; ++ int i; ++ ++again: ++ val = 0; ++ while ((c = *str_mac) != '\0') { ++ if ((c>='0')&&(c<='9')) { ++ val = (val * 16) + (c - '0'); ++ str_mac++; ++ continue; ++ } ++ else if (((c>='a')&&(c<='f'))||((c>='A')&&(c<='F'))) { ++ val = (val << 4) + (c + 10 - (((c>='a')&&(c<='f')) ? 'a' : 'A')); ++ str_mac++; ++ continue; ++ } ++ break; ++ } ++ if (*str_mac == ':') { ++ *octetptr++ = val, str_mac++; ++ if (octetptr >= octet + 6) ++ return 1; ++ goto again; ++ } ++ ++ /* Check for trailing characters */ ++ if (*str_mac && !(*str_mac==' ')) ++ return 1; ++ ++ *octetptr++ = val; ++ ++ if ((octetptr - octet)==6) { ++ for(i=0;i<=6;i++) ++ addr[i]=octet[i]; ++ } ++ else ++ return 1; ++ ++ return 0; ++} ++#endif +--- /dev/null ++++ b/drivers/net/fec/fec.h +@@ -0,0 +1,162 @@ ++ ++#define FEC_BASE_ADDR_FEC0 ((unsigned int)MCF_MBAR + 0x9000) ++#define FEC_BASE_ADDR_FEC1 ((unsigned int)MCF_MBAR + 0x9800) ++ ++//#define FEC_INTC_IMRH_INT_MASK38 (0x00000040) ++//#define FEC_INTC_IMRH_INT_MASK39 (0x00000080) ++//#define FEC_INTC_ICR_FEC0 (0x30) ++//#define FEC_INTC_ICR_FEC1 (0x31) ++#define FEC_FECI2CIRQ (0xFFC0) ++#define FEC_GPIO_PAR_FECI2CIRQ *(volatile unsigned short*)((unsigned int)MCF_MBAR + 0xA44) ++//#define FEC_INTC_ICRn(x) (*(volatile unsigned char *)(void*)((unsigned int) MCF_MBAR + 0x000740+((x)*0x001))) ++//#define FEC_INTC_IMRH *(volatile unsigned int*)((unsigned int)MCF_MBAR + 0x000708) ++ ++#define FEC_ECR_DISABLE (0x00000000) ++ ++#define FEC_ECR(x) *(volatile unsigned int *)(x + 0x024) ++#define FEC_EIR(x) *(volatile unsigned int*)(x + 0x004) ++#define FEC_PALR(x) *(volatile unsigned int*)(x + 0x0E4) ++#define FEC_PAUR(x) *(volatile unsigned int*)(x + 0x0E8) ++#define FEC_IALR(x) *(volatile unsigned int*)(x + 0x11C) ++#define FEC_IAUR(x) *(volatile unsigned int*)(x + 0x118) ++#define FEC_GALR(x) *(volatile unsigned int*)(x + 0x124) ++#define FEC_GAUR(x) *(volatile unsigned int*)(x + 0x120) ++#define FEC_RCR(x) *(volatile unsigned int*)(x + 0x084) ++#define FEC_FECRFCR(x) *(volatile unsigned int*)(x + 0x18C) ++#define FEC_FECRFAR(x) *(volatile unsigned int*)(x + 0x198) ++#define FEC_FECTFCR(x) *(volatile unsigned int*)(x + 0x1AC) ++#define FEC_FECTFAR(x) *(volatile unsigned int*)(x + 0x1B8) ++#define FEC_FECTFWR(x) *(volatile unsigned int*)(x + 0x144) ++#define FEC_CTCWR(x) *(volatile unsigned int*)(x + 0x1C8) ++#define FEC_EIMR(x) *(volatile unsigned int*)(x + 0x008) ++#define FEC_TCR(x) *(volatile unsigned int*)(x + 0x0C4) ++#define FEC_MIBC(x) *(volatile unsigned int*)(x + 0x064) ++#define FEC_MSCR(x) *(volatile unsigned int*)(x + 0x044) ++#define FEC_FECTFDR(x) *(volatile unsigned int*)(x + 0x1A4) ++#define FEC_FECRFDR(x) *(volatile unsigned int*)(x + 0x184) ++#define FEC_FECTFSR(x) *(volatile unsigned int*)(x + 0x1A8) ++#define FEC_FECRFSR(x) *(volatile unsigned int*)(x + 0x188) ++#define FECSTAT_RMON_R_PACKETS(x) *(volatile unsigned int*)(x + 0x284) ++#define FECSTAT_RMON_T_PACKETS(x) *(volatile unsigned int*)(x + 0x204) ++#define FECSTAT_RMON_R_OCTETS(x) *(volatile unsigned int*)(x + 0x2C4) ++#define FECSTAT_RMON_T_OCTETS(x) *(volatile unsigned int*)(x + 0x244) ++#define FECSTAT_RMON_R_UNDERSIZE(x) *(volatile unsigned int*)(x + 0x294) ++#define FECSTAT_RMON_R_OVERSIZE(x) *(volatile unsigned int*)(x + 0x298) ++#define FECSTAT_RMON_R_FRAG(x) *(volatile unsigned int*)(x + 0x29C) ++#define FECSTAT_RMON_R_JAB(x) *(volatile unsigned int*)(x + 0x2A0) ++#define FECSTAT_RMON_R_MC_PKT(x) *(volatile unsigned int*)(x + 0x28C) ++#define FECSTAT_RMON_T_COL(x) *(volatile unsigned int*)(x + 0x224) ++#define FECSTAT_IEEE_R_ALIGN(x) *(volatile unsigned int*)(x + 0x2D4) ++#define FECSTAT_IEEE_R_CRC(x) *(volatile unsigned int*)(x + 0x2D0) ++#define FECSTAT_IEEE_R_MACERR(x) *(volatile unsigned int*)(x + 0x2D8) ++#define FECSTAT_IEEE_T_CSERR(x) *(volatile unsigned int*)(x + 0x268) ++#define FECSTAT_IEEE_T_MACERR(x) *(volatile unsigned int*)(x + 0x264) ++#define FECSTAT_IEEE_T_LCOL(x) *(volatile unsigned int*)(x + 0x25C) ++#define FECSTAT_IEEE_R_OCTETS_OK(x) *(volatile unsigned int*)(x + 0x2E0) ++#define FECSTAT_IEEE_T_OCTETS_OK(x) *(volatile unsigned int*)(x + 0x274) ++#define FECSTAT_IEEE_R_DROP(x) *(volatile unsigned int*)(x + 0x2C8) ++#define FECSTAT_IEEE_T_DROP(x) *(volatile unsigned int*)(x + 0x248) ++#define FECSTAT_IEEE_R_FRAME_OK(x) *(volatile unsigned int*)(x + 0x2CC) ++#define FECSTAT_IEEE_T_FRAME_OK(x) *(volatile unsigned int*)(x + 0x24C) ++#define FEC_MMFR(x) *(volatile unsigned int*)(x + 0x040) ++#define FEC_FECFRST(x) *(volatile unsigned int*)(x + 0x1C4) ++ ++#define FEC_MAX_FRM_SIZE (1518) ++#define FEC_MAXBUF_SIZE (1520) ++ ++// Register values ++#define FEC_ECR_RESET (0x00000001) ++#define FEC_EIR_CLEAR (0xFFFFFFFF) ++#define FEC_EIR_RL (0x00100000) ++#define FEC_EIR_HBERR (0x80000000) ++#define FEC_EIR_BABR (0x40000000) // babbling receive error ++#define FEC_EIR_BABT (0x20000000) // babbling transmit error ++#define FEC_EIR_TXF (0x08000000) // transmit frame interrupt ++#define FEC_EIR_MII (0x00800000) // MII interrupt ++#define FEC_EIR_LC (0x00200000) // late collision ++#define FEC_EIR_XFUN (0x00080000) // transmit FIFO underrun ++#define FEC_EIR_XFERR (0x00040000) // transmit FIFO error ++#define FEC_EIR_RFERR (0x00020000) // receive FIFO error ++#define FEC_RCR_MAX_FRM_SIZE (FEC_MAX_FRM_SIZE << 16) ++#define FEC_RCR_MII (0x00000004) ++#define FEC_FECRFCR_FAE (0x00400000) // frame accept error ++#define FEC_FECRFCR_RXW (0x00200000) // receive wait condition ++#define FEC_FECRFCR_UF (0x00100000) // receive FIFO underflow ++#define FEC_FECRFCR_FRM (0x08000000) ++#define FEC_FECRFCR_GR (0x7 << 24) ++ ++#define FEC_EIMR_DISABLE (0x00000000) ++ ++#define FEC_FECRFAR_ALARM (0x300) ++#define FEC_FECTFCR_FRM (0x08000000) ++#define FEC_FECTFCR_GR (0x7 << 24) ++#define FEC_FECTFCR_FAE (0x00400000) // frame accept error ++#define FEC_FECTFCR_TXW (0x00040000) // transmit wait condition ++#define FEC_FECTFCR_UF (0x00100000) // transmit FIFO underflow ++#define FEC_FECTFCR_OF (0x00080000) // transmit FIFO overflow ++ ++#define FEC_FECTFAR_ALARM (0x100) ++#define FEC_FECTFWR_XWMRK (0x00000000) ++ ++#define FEC_FECTFSR_MSK (0xC0B00000) ++#define FEC_FECTFSR_TXW (0x40000000) // transmit wait condition ++#define FEC_FECTFSR_FAE (0x00800000) // frame accept error ++#define FEC_FECTFSR_UF (0x00200000) // transmit FIFO underflow ++#define FEC_FECTFSR_OF (0x00100000) // transmit FIFO overflow ++ ++#define FEC_FECRFSR_MSK (0x80F00000) ++#define FEC_FECRFSR_FAE (0x00800000) // frame accept error ++#define FEC_FECRFSR_RXW (0x00400000) // receive wait condition ++#define FEC_FECRFSR_UF (0x00200000) // receive FIFO underflow ++ ++#define FEC_CTCWR_TFCW_CRC (0x03000000) ++#define FEC_TCR_FDEN (0x00000004) ++#define FEC_TCR_HBC (0x00000002) ++#define FEC_RCR_DRT (0x00000002) ++#define FEC_EIMR_MASK (FEC_EIR_RL | FEC_EIR_HBERR) ++#define FEC_ECR_ETHEREN (0x00000002) ++#define FEC_FECTFCR_MSK (0x00FC0000) ++#define FEC_FECRFCR_MSK (0x00F80000) ++#define FEC_EIR_GRA (0x10000000) ++#define FEC_TCR_GTS (0x00000001) ++#define FEC_MIBC_ENABLE (0x00000000) ++#define FEC_MIB_LEN (228) ++#define FEC_PHY_ADDR (0x01) ++ ++#define FEC_RX_DMA_PRI (6) ++#define FEC_TX_DMA_PRI (6) ++ ++#define FEC_TX_BUF_NUMBER (8) ++#define FEC_RX_BUF_NUMBER (64) ++ ++#define FEC_TX_INDEX_MASK (0x7) ++#define FEC_RX_INDEX_MASK (0x3f) ++ ++#define FEC_RX_DESC_FEC0 SYS_SRAM_FEC_START ++#define FEC_TX_DESC_FEC0 FEC_RX_DESC_FEC0 + FEC_RX_BUF_NUMBER * sizeof(MCD_bufDescFec) ++ ++#define FEC_RX_DESC_FEC1 SYS_SRAM_FEC_START + SYS_SRAM_FEC_SIZE/2 ++#define FEC_TX_DESC_FEC1 FEC_RX_DESC_FEC1 + FEC_RX_BUF_NUMBER * sizeof(MCD_bufDescFec) ++ ++#define FEC_EIR_MII (0x00800000) ++#define FEC_MMFR_READ (0x60020000) ++#define FEC_MMFR_WRITE (0x50020000) ++ ++#define FEC_FLAGS_RX (0x00000001) ++ ++#define FEC_CRCPOL (0xEDB88320) ++ ++#define FEC_MII_TIMEOUT (2) ++#define FEC_GR_TIMEOUT (1) ++#define FEC_TX_TIMEOUT (1) ++#define FEC_RX_TIMEOUT (1) ++ ++#define FEC_SW_RST 0x2000000 ++#define FEC_RST_CTL 0x1000000 ++ ++int fec_read_mii(unsigned int base_addr, unsigned int pa, unsigned int ra, ++ unsigned int *data); ++int fec_write_mii(unsigned int base_addr, unsigned int pa, unsigned int ra, ++ unsigned int data); ++ ++#define init_transceiver ks8721_init_transceiver +--- /dev/null ++++ b/drivers/net/fec/Kconfig +@@ -0,0 +1,25 @@ ++config FEC_548x ++ tristate "MCF547x/MCF548x Fast Ethernet Controller support" ++ depends on M547X_8X ++ help ++ The MCF547x and MCF548x have a built-in Fast Ethernet Controller. ++ Saying Y here will include support for this device in the kernel. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called fecm. ++ ++config FEC_548x_AUTO_NEGOTIATION ++ bool "Enable Auto-Negotiation" ++ depends on FEC_548x ++ help ++ This option enables the FEC to automatically detect the ++ half/full duplex mode and the network speed at initialization ++ If you want this, say Y. ++ ++config FEC_548x_ENABLE_FEC2 ++ bool "Enable the second FEC" ++ depends on FEC_548x ++ help ++ This enables the second FEC on the 547x/548x. If you want to use ++ it, say Y. ++ +--- /dev/null ++++ b/drivers/net/fec/ks8721.c +@@ -0,0 +1,125 @@ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/string.h> ++#include <linux/ptrace.h> ++#include <linux/errno.h> ++#include <linux/ioport.h> ++#include <linux/slab.h> ++#include <linux/interrupt.h> ++#include <linux/pci.h> ++#include <linux/init.h> ++#include <linux/delay.h> ++#include <linux/netdevice.h> ++#include <linux/etherdevice.h> ++#include <linux/skbuff.h> ++#include <linux/spinlock.h> ++#include <linux/workqueue.h> ++#include <linux/bitops.h> ++ ++#if 0 ++#include <linux/config.h> ++#include <linux/sched.h> ++#include <linux/errno.h> ++#include <asm/coldfire.h> ++#endif ++#include <asm/coldfire.h> ++#include <asm/mcfsim.h> ++ ++#include "fec.h" ++#include "ks8721.h" ++ ++#ifdef CONFIG_FEC_548x_AUTO_NEGOTIATION ++#define KS8721_AUTO_NEGOTIATION_ENABLE ++#endif ++ ++/************************************************************************ ++* +NAME: ks8721_init_transceiver ++* ++* DESCRIPTION: This function initializes the transceiver ++* ++* RETURNS: If no error occurs, this function returns zero. ++* Otherwise, it returns 1 ++*************************************************************************/ ++ ++int ks8721_init_transceiver(unsigned long base_addr, int *fduplex) ++{ ++ ++ int data; ++ unsigned long time; ++ int flag = 1; ++ ++ int result; ++ ++ // Set the frequency of MII ++ FEC_MSCR(base_addr) = FEC_MII_SPEED; ++ ++ // Reset ++ if ((result = fec_write_mii(base_addr, FEC_PHY_ADDR, KS8721_CTRL, KS8721_CTRL_RESET))) ++ return result; ++ ++ // Read back ++ if ((result = fec_read_mii(base_addr, FEC_PHY_ADDR, KS8721_CTRL, &data)) != 0) ++ return result; ++ ++ // If reset bit is set, return ++ if (data & KS8721_CTRL_RESET) ++ return -ETIME; ++ ++#ifdef KS8721_AUTO_NEGOTIATION_ENABLE ++ ++ // Disable the auto-negotiation ++ if ((result = fec_write_mii(base_addr, FEC_PHY_ADDR, KS8721_CTRL, 0)) != 0) ++ return result; ++ ++ // Set the auto-negotiation advertisement register ++ if ((result = fec_write_mii(base_addr, FEC_PHY_ADDR, KS8721_ANADV, KS8721_ANADV_ADV_ALL)) != 0) ++ return result; ++ ++ // Enable the auto-negotiation ++ if ((result = fec_write_mii(base_addr, FEC_PHY_ADDR, KS8721_CTRL, KS8721_CTRL_AN_ENABLE)) != 0) ++ return result; ++ ++ // Read PHY status register ++ if ((result = fec_read_mii(base_addr, FEC_PHY_ADDR, KS8721_STAT, &data)) != 0) ++ return result; ++ // Set the current time ++ time = jiffies; ++ ++ // Wait for the auto-negotiation completion ++ while (!(data & KS8721_STAT_ANCOMPLETE)) ++ { ++ ++ if (jiffies - time > KS8721_TIMEOUT * HZ) ++ { ++ flag = 0; ++ break; ++ } ++ ++ schedule(); ++ ++ // Read PHY status register ++ if ((result = fec_read_mii(base_addr, FEC_PHY_ADDR, KS8721_STAT, &data)) != 0) ++ return result; ++ } ++ ++ if (flag) ++ { ++ // Set the duplex flag ++ if (data & KS8721_STAT_FDUPLEX) ++ *fduplex = 1; ++ else ++ *fduplex = 0; ++ ++ return 0; ++ } ++ ++#endif ++ ++ // Set the default mode (Full duplex, 100 Mbps) ++ if ((result = fec_write_mii(base_addr, FEC_PHY_ADDR, KS8721_CTRL, KS8721_CTRL_DEFAULT_MODE)) != 0) ++ return result; ++ *fduplex = KS8721_CTRL_DEFAULT_MODE & 0x100; ++ ++ return 0; ++ ++} +--- /dev/null ++++ b/drivers/net/fec/ks8721.h +@@ -0,0 +1,21 @@ ++ ++#define FEC_MII_SPEED (((unsigned int)(MCF_BUSCLK / 5000000)) << 1) ++ ++// Numbers of the transceiver registers ++#define KS8721_CTRL 0x00 ++#define KS8721_ANADV 0x04 ++#define KS8721_STAT 0x01 ++ ++// Register values ++#define KS8721_CTRL_RESET 0x8000 ++#define KS8721_ANADV_ADV_ALL 0x01E1 ++#define KS8721_CTRL_AN_ENABLE 0x1280 ++#define KS8721_CTRL_DEFAULT_MODE 0x2100 ++#define KS8721_STAT_ANCOMPLETE 0x0020 ++#define KS8721_STAT_LINK 0x0004 ++#define KS8721_STAT_FDUPLEX 0x5000 ++ ++// Timeout for the auto-negotiation mode ++#define KS8721_TIMEOUT 5 ++ ++int ks8721_init_transceiver(unsigned long base_addr, int *fduplex); +--- /dev/null ++++ b/drivers/net/fec/Makefile +@@ -0,0 +1,7 @@ ++# ++# Makefile for the FEC ethernet driver ++# ++ ++obj-$(CONFIG_FEC_548x) += fecm.o ++ ++fecm-objs := fec.o ks8721.o +--- a/drivers/net/fec.c ++++ b/drivers/net/fec.c +@@ -23,6 +23,9 @@ + * + * Bug fixes and cleanup by Philippe De Muyter (phdm@macqel.be) + * Copyright (c) 2004-2006 Macq Electronique SA. ++ * ++ * Coldfire bug fixes and cleanup by Kurt Mahan (kmahan@freescale.com) ++ * Copyright 2007-2008 Freescale Semiconductor, Inc. All Rights Reserved. + */ + + #include <linux/module.h> +@@ -51,7 +54,9 @@ + + #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || \ + defined(CONFIG_M5272) || defined(CONFIG_M528x) || \ +- defined(CONFIG_M520x) || defined(CONFIG_M532x) ++ defined(CONFIG_M520x) || defined(CONFIG_M532x) || \ ++ defined(CONFIG_M5445X) ++ + #include <asm/coldfire.h> + #include <asm/mcfsim.h> + #include "fec.h" +@@ -82,6 +87,11 @@ static unsigned int fec_hw[] = { + (MCF_MBAR+0x30000), + #elif defined(CONFIG_M532x) + (MCF_MBAR+0xfc030000), ++#elif defined(CONFIG_M5445X) ++ (MCF_MBAR+0xfc030000), ++#if defined(CONFIG_FEC2) ++ (MCF_MBAR+0xfc034000), ++#endif + #else + &(((immap_t *)IMAP_ADDR)->im_cpm.cp_fec), + #endif +@@ -172,7 +182,7 @@ typedef struct { + * account when setting it. + */ + #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ +- defined(CONFIG_M520x) || defined(CONFIG_M532x) ++ defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_M5445X) + #define OPT_FRAME_SIZE (PKT_MAXBUF_SIZE << 16) + #else + #define OPT_FRAME_SIZE 0 +@@ -213,6 +223,7 @@ struct fec_enet_private { + uint phy_speed; + phy_info_t const *phy; + struct work_struct phy_task; ++ volatile fec_t *phy_hwp; + + uint sequence_done; + uint mii_phy_task_queued; +@@ -349,7 +360,8 @@ fec_enet_start_xmit(struct sk_buff *skb, + if (bdp->cbd_bufaddr & 0x3) { + unsigned int index; + index = bdp - fep->tx_bd_base; +- memcpy(fep->tx_bounce[index], (void *) bdp->cbd_bufaddr, bdp->cbd_datlen); ++ memcpy(fep->tx_bounce[index], ++ (void *)skb->data, bdp->cbd_datlen); + bdp->cbd_bufaddr = __pa(fep->tx_bounce[index]); + } + +@@ -702,7 +714,7 @@ fec_enet_mii(struct net_device *dev) + uint mii_reg; + + fep = netdev_priv(dev); +- ep = fep->hwp; ++ ep = fep->phy_hwp; + mii_reg = ep->fec_mii_data; + + spin_lock(&fep->lock); +@@ -753,7 +765,7 @@ mii_queue(struct net_device *dev, int re + mii_tail = mip; + } else { + mii_head = mii_tail = mip; +- fep->hwp->fec_mii_data = regval; ++ fep->phy_hwp->fec_mii_data = regval; + } + } else { + retval = 1; +@@ -1151,8 +1163,7 @@ static phy_info_t const phy_info_ks8721b + }; + + /* ------------------------------------------------------------------------- */ +-/* register definitions for the DP83848 */ +- ++/* register definitions for the DP83848 and DP83849 */ + #define MII_DP8384X_PHYSTST 16 /* PHY Status Register */ + + static void mii_parse_dp8384x_sr2(uint mii_reg, struct net_device *dev) +@@ -1186,27 +1197,50 @@ static void mii_parse_dp8384x_sr2(uint m + *s |= PHY_STAT_FAULT; + } + ++static phy_cmd_t const phy_cmd_dp8384x_ack_int[] = { ++ { mk_mii_end, } ++ }; ++ ++static phy_cmd_t const phy_cmd_dp8384x_shutdown[] = { ++ { mk_mii_end, } ++ }; ++ + static phy_info_t phy_info_dp83848= { +- 0x020005c9, +- "DP83848", ++ .id = 0x020005c9, ++ .name = "DP83848", + +- (const phy_cmd_t []) { /* config */ ++ .config = (const phy_cmd_t []) { /* config */ + { mk_mii_read(MII_REG_CR), mii_parse_cr }, + { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, + { mk_mii_read(MII_DP8384X_PHYSTST), mii_parse_dp8384x_sr2 }, + { mk_mii_end, } + }, +- (const phy_cmd_t []) { /* startup - enable interrupts */ ++ .startup = (const phy_cmd_t []) { /* startup - enable interrupts */ + { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ + { mk_mii_read(MII_REG_SR), mii_parse_sr }, + { mk_mii_end, } + }, +- (const phy_cmd_t []) { /* ack_int - never happens, no interrupt */ ++ .ack_int = phy_cmd_dp8384x_ack_int, ++ .shutdown = phy_cmd_dp8384x_shutdown, ++}; ++ ++static phy_info_t phy_info_dp83849 = { ++ .id = 0x020005ca, ++ .name = "DP83849", ++ ++ .config = (const phy_cmd_t []) { /* config */ ++ { mk_mii_read(MII_REG_CR), mii_parse_cr }, ++ { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, ++ { mk_mii_read(MII_DP8384X_PHYSTST), mii_parse_dp8384x_sr2 }, + { mk_mii_end, } + }, +- (const phy_cmd_t []) { /* shutdown */ ++ .startup = (const phy_cmd_t []) { /* startup - enable interrupts */ ++ { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ ++ { mk_mii_read(MII_REG_SR), mii_parse_sr }, + { mk_mii_end, } + }, ++ .ack_int = phy_cmd_dp8384x_ack_int, ++ .shutdown = phy_cmd_dp8384x_shutdown, + }; + + /* ------------------------------------------------------------------------- */ +@@ -1218,6 +1252,7 @@ static phy_info_t const * const phy_info + &phy_info_am79c874, + &phy_info_ks8721bl, + &phy_info_dp83848, ++ &phy_info_dp83849, + NULL + }; + +@@ -1799,6 +1834,138 @@ static void __inline__ fec_uncache(unsig + + /* ------------------------------------------------------------------------- */ + ++#elif defined(CONFIG_M5445X) ++/* ++ * Code specific for M5445X ++ */ ++ ++static void __inline__ fec_request_intrs(struct net_device *dev) ++{ ++ struct fec_enet_private *fep; ++ int b; ++ static const struct idesc { ++ char *name; ++ unsigned short irq; ++ } *idp, id[] = { ++ { "fec(TXF)", 36 }, ++ { "fec(TXB)", 37 }, ++ { "fec(TXFIFO)", 38 }, ++ { "fec(TXCR)", 39 }, ++ { "fec(RXF)", 40 }, ++ { "fec(RXB)", 41 }, ++ { "fec(MII)", 42 }, ++ { "fec(LC)", 43 }, ++ { "fec(HBERR)", 44 }, ++ { "fec(GRA)", 45 }, ++ { "fec(EBERR)", 46 }, ++ { "fec(BABT)", 47 }, ++ { "fec(BABR)", 48 }, ++ { NULL }, ++ }; ++ ++ fep = netdev_priv(dev); ++ b = (fep->index) ? 77 : 64; ++ ++ /* Setup interrupt handlers. */ ++ for (idp = id; idp->name; idp++) { ++ if (request_irq(b+idp->irq, fec_enet_interrupt, IRQF_DISABLED, ++ idp->name, dev) != 0) ++ printk(KERN_ERR "FEC: Could not alloc %s IRQ(%d)!\n", ++ idp->name, b+idp->irq); ++ } ++ ++ if (fep->index) { ++ /* Configure RMII */ ++ MCF_GPIO_PAR_FEC = (MCF_GPIO_PAR_FEC & ++ MCF_GPIO_PAR_FEC_FEC1_MASK) | ++ MCF_GPIO_PAR_FEC_FEC1_RMII_GPIO; ++ } else { ++ /* Configure RMII */ ++ MCF_GPIO_PAR_FEC = (MCF_GPIO_PAR_FEC & ++ MCF_GPIO_PAR_FEC_FEC0_MASK) | ++ MCF_GPIO_PAR_FEC_FEC0_RMII_GPIO; ++ } ++ ++ /* Set up gpio outputs for MII lines on FEC0 */ ++ MCF_GPIO_PAR_FECI2C |= (0 | ++ MCF_GPIO_PAR_FECI2C_MDIO0_MDIO0 | ++ MCF_GPIO_PAR_FECI2C_MDC0_MDC0); ++} ++ ++static void __inline__ fec_set_mii(struct net_device *dev, ++ struct fec_enet_private *fep) ++{ ++ volatile fec_t *fecp; ++ ++ fecp = fep->hwp; ++ fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04; ++ fecp->fec_x_cntrl = 0x00; ++ ++ /* ++ * Set MII speed to 2.5 MHz ++ */ ++ fep->phy_speed = ((((MCF_CLK / 2) / (2500000 / 10)) + 5) / 10) * 2; ++ fecp->fec_mii_speed = fep->phy_speed; ++ ++ fec_restart(dev, 0); ++} ++ ++static void __inline__ fec_get_mac(struct net_device *dev) ++{ ++ struct fec_enet_private *fep = netdev_priv(dev); ++ volatile fec_t *fecp; ++ unsigned char *iap, tmpaddr[ETH_ALEN]; ++ ++ fecp = fep->hwp; ++ ++ if (FEC_FLASHMAC) { ++ /* ++ * Get MAC address from FLASH. ++ * If it is all 1's or 0's, use the default. ++ */ ++ iap = FEC_FLASHMAC; ++ if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) && ++ (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0)) ++ iap = fec_mac_default; ++ if ((iap[0] == 0xff) && (iap[1] == 0xff) && (iap[2] == 0xff) && ++ (iap[3] == 0xff) && (iap[4] == 0xff) && (iap[5] == 0xff)) ++ iap = fec_mac_default; ++ } else { ++ *((unsigned long *) &tmpaddr[0]) = fecp->fec_addr_low; ++ *((unsigned short *) &tmpaddr[4]) = (fecp->fec_addr_high >> 16); ++ iap = &tmpaddr[0]; ++ } ++ ++ memcpy(dev->dev_addr, iap, ETH_ALEN); ++ ++ /* Adjust MAC if using default MAC address */ ++ if (iap == fec_mac_default) ++ dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + ++ fep->index; ++} ++ ++static void __inline__ fec_enable_phy_intr(void) ++{ ++} ++ ++static void __inline__ fec_disable_phy_intr(void) ++{ ++} ++ ++static void __inline__ fec_phy_ack_intr(void) ++{ ++} ++ ++static void __inline__ fec_localhw_setup(void) ++{ ++} ++ ++static void __inline__ fec_uncache(unsigned long addr) ++{ ++} ++ ++/* ------------------------------------------------------------------------- */ ++ + + #else + +@@ -2305,7 +2472,7 @@ fec_set_mac_address(struct net_device *d + + } + +-/* Initialize the FEC Ethernet on 860T (or ColdFire 5272). ++/* Initialize the FEC Ethernet. + */ + /* + * XXX: We need to clean up on failure exits here. +@@ -2326,7 +2493,7 @@ int __init fec_enet_init(struct net_devi + + /* Allocate memory for buffer descriptors. + */ +- mem_addr = __get_free_page(GFP_KERNEL); ++ mem_addr = __get_free_page(GFP_DMA); + if (mem_addr == 0) { + printk("FEC: allocate descriptor memory failed?\n"); + return -ENOMEM; +@@ -2339,6 +2506,11 @@ int __init fec_enet_init(struct net_devi + fep->index = index; + fep->hwp = fecp; + fep->netdev = dev; ++#ifdef CONFIG_FEC_SHARED_PHY ++ fep->phy_hwp = (volatile fec_t *) fec_hw[index & ~1]; ++#else ++ fep->phy_hwp = fecp; ++#endif + + /* Whack a reset. We should wait for this. + */ +@@ -2375,7 +2547,7 @@ int __init fec_enet_init(struct net_devi + + /* Allocate a page. + */ +- mem_addr = __get_free_page(GFP_KERNEL); ++ mem_addr = __get_free_page(GFP_DMA); + /* XXX: missing check for allocation failure */ + + fec_uncache(mem_addr); +@@ -2400,7 +2572,7 @@ int __init fec_enet_init(struct net_devi + bdp = fep->tx_bd_base; + for (i=0, j=FEC_ENET_TX_FRPPG; i<TX_RING_SIZE; i++) { + if (j >= FEC_ENET_TX_FRPPG) { +- mem_addr = __get_free_page(GFP_KERNEL); ++ mem_addr = __get_free_page(GFP_DMA); + j = 1; + } else { + mem_addr += FEC_ENET_TX_FRSIZE; +@@ -2462,7 +2634,11 @@ int __init fec_enet_init(struct net_devi + * remainder of the interface. + */ + fep->phy_id_done = 0; ++#ifndef CONFIG_FEC_SHARED_PHY + fep->phy_addr = 0; ++#else ++ fep->phy_addr = fep->index; ++#endif + mii_queue(dev, mk_mii_read(MII_REG_PHYIR1), mii_discover_phy); + + index++; +--- a/drivers/net/fec.h ++++ b/drivers/net/fec.h +@@ -14,7 +14,7 @@ + /****************************************************************************/ + + #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ +- defined(CONFIG_M520x) || defined(CONFIG_M532x) ++ defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_M5445X) + /* + * Just figures, Motorola would have to change the offsets for + * registers in the same peripheral device on different models +--- a/drivers/net/Kconfig ++++ b/drivers/net/Kconfig +@@ -351,6 +351,8 @@ config MACB + + source "drivers/net/arm/Kconfig" + ++source "drivers/net/fec/Kconfig" ++ + config AX88796 + tristate "ASIX AX88796 NE2000 clone support" + depends on ARM || MIPS || SUPERH +@@ -1973,7 +1975,7 @@ config 68360_ENET + + config FEC + bool "FEC ethernet controller (of ColdFire CPUs)" +- depends on M523x || M527x || M5272 || M528x || M520x ++ depends on M523x || M527x || M5272 || M528x || M520x || M5445X + help + Say Y here if you want to use the built-in 10/100 Fast ethernet + controller on some Motorola ColdFire processors. +@@ -1985,6 +1987,12 @@ config FEC2 + Say Y here if you want to use the second built-in 10/100 Fast + ethernet controller on some Motorola ColdFire processors. + ++config FEC_SHARED_PHY ++ bool "Shared PHY interface(on some ColdFire designs)" ++ depends on FEC2 ++ help ++ Say Y here if both PHYs are controlled via a single channel. ++ + config FEC_MPC52xx + tristate "MPC52xx FEC driver" + depends on PPC_MERGE && PPC_MPC52xx && PPC_BESTCOMM_FEC +--- a/drivers/net/Makefile ++++ b/drivers/net/Makefile +@@ -226,6 +226,8 @@ obj-$(CONFIG_ENC28J60) += enc28j60.o + + obj-$(CONFIG_MACB) += macb.o + ++obj-$(CONFIG_FEC_548x) += fec/ ++ + obj-$(CONFIG_ARM) += arm/ + obj-$(CONFIG_DEV_APPLETALK) += appletalk/ + obj-$(CONFIG_TR) += tokenring/ +--- a/drivers/pci/access.c ++++ b/drivers/pci/access.c +@@ -23,6 +23,7 @@ static DEFINE_SPINLOCK(pci_lock); + #define PCI_word_BAD (pos & 1) + #define PCI_dword_BAD (pos & 3) + ++#ifdef NL_ORIGINAL + #define PCI_OP_READ(size,type,len) \ + int pci_bus_read_config_##size \ + (struct pci_bus *bus, unsigned int devfn, int pos, type *value) \ +@@ -37,7 +38,20 @@ int pci_bus_read_config_##size \ + spin_unlock_irqrestore(&pci_lock, flags); \ + return res; \ + } +- ++#else /* NL_ORIGINAL */ ++#define PCI_OP_READ(size,type,len) \ ++int pci_bus_read_config_##size \ ++ (struct pci_bus *bus, unsigned int devfn, int pos, type *value) \ ++{ \ ++ int res; \ ++ unsigned long flags; \ ++ if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \ ++ spin_lock_irqsave(&pci_lock, flags); \ ++ res = bus->ops->read(bus, devfn, pos, len, (u32 *)value); \ ++ spin_unlock_irqrestore(&pci_lock, flags); \ ++ return res; \ ++} ++#endif /* NL_ORIGINAL */ + #define PCI_OP_WRITE(size,type,len) \ + int pci_bus_write_config_##size \ + (struct pci_bus *bus, unsigned int devfn, int pos, type value) \ +--- a/drivers/pci/Makefile ++++ b/drivers/pci/Makefile +@@ -39,6 +39,7 @@ obj-$(CONFIG_PPC) += setup-bus.o + obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o + obj-$(CONFIG_X86_VISWS) += setup-irq.o + obj-$(CONFIG_MN10300) += setup-bus.o ++obj-$(CONFIG_M54455) += setup-bus.o setup-irq.o + + # + # ACPI Related PCI FW Functions +--- a/drivers/rtc/rtc-rs5c372.c ++++ b/drivers/rtc/rtc-rs5c372.c +@@ -15,7 +15,6 @@ + + #define DRV_VERSION "0.5" + +- + /* + * Ricoh has a family of I2C based RTCs, which differ only slightly from + * each other. Differences center on pinout (e.g. how many interrupts, +@@ -60,6 +59,15 @@ + /* to read (style 1) or write registers starting at R */ + #define RS5C_ADDR(R) (((R) << 4) | 0) + ++#ifdef CONFIG_M547X_8X ++#define DRV_NAME "rv5c387a" ++/* i2c configuration */ ++#define RV5C387_I2C_ADDR 0x32 ++static unsigned short normal_i2c[] = { ++ RV5C387_I2C_ADDR, I2C_CLIENT_END ++}; ++I2C_CLIENT_INSMOD; /* defines addr_data */ ++#endif + + enum rtc_type { + rtc_undef = 0, +@@ -506,14 +514,14 @@ static int rs5c372_probe(struct i2c_clie + err = -ENODEV; + goto exit; + } +- +- if (!(rs5c372 = kzalloc(sizeof(struct rs5c372), GFP_KERNEL))) { ++ rs5c372 = kzalloc(sizeof(struct rs5c372), GFP_KERNEL); ++ if (!rs5c372) { + err = -ENOMEM; + goto exit; + } + + /* we read registers 0x0f then 0x00-0x0f; skip the first one */ +- rs5c372->regs=&rs5c372->buf[1]; ++ rs5c372->regs = &rs5c372->buf[1]; + + rs5c372->client = client; + i2c_set_clientdata(client, rs5c372); +@@ -605,7 +613,7 @@ static int rs5c372_probe(struct i2c_clie + case rtc_rv5c386: s = "rv5c386"; break; + case rtc_rv5c387a: s = "rv5c387a"; break; + default: s = "chip"; break; +- }; s;}), ++ }; s; }), + rs5c372->time24 ? "24hr" : "am/pm" + ); + +@@ -645,12 +653,61 @@ static int rs5c372_remove(struct i2c_cli + return 0; + } + ++#ifdef CONFIG_M547X_8X ++static int rv5c387_probe(struct i2c_adapter *adapter, int addr, int kind) ++{ ++ int rc = 0; ++ struct i2c_client *new_client = NULL; ++ ++ if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) { ++ rc = -ENODEV; ++ printk(KERN_DEBUG "%s i2c_check_functionality\n", __FUNCTION__); ++ goto failout; ++ } ++ ++ new_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); ++ if (new_client == NULL) { ++ rc = -ENOMEM; ++ printk(KERN_DEBUG "%s kzalloc new_client\n", __FUNCTION__); ++ goto failout; ++ } ++ ++ new_client->addr = addr; ++ new_client->adapter = adapter; ++ new_client->driver = &rs5c372_driver; ++ new_client->flags = 0; ++ strcpy(new_client->name, DRV_NAME); ++ ++ rc = i2c_attach_client(new_client); ++ if (rc < 0) { ++ printk(KERN_DEBUG "%s i2c_attach_client\n", __FUNCTION__); ++ goto failout; ++ } ++ ++ rs5c372_probe(new_client); ++ return 0; ++failout: ++ kfree(new_client); ++ return rc; ++} ++ ++static int ++rv5c387_attach_adapter(struct i2c_adapter *adapter) ++{ ++ return i2c_probe(adapter, &addr_data, rv5c387_probe); ++} ++#endif ++ + static struct i2c_driver rs5c372_driver = { + .driver = { + .name = "rtc-rs5c372", + }, ++#ifdef CONFIG_M547X_8X ++ .attach_adapter = &rv5c387_attach_adapter, ++#else + .probe = rs5c372_probe, + .remove = rs5c372_remove, ++#endif + }; + + static __init int rs5c372_init(void) +--- a/drivers/serial/Kconfig ++++ b/drivers/serial/Kconfig +@@ -979,6 +979,12 @@ config SERIAL_COLDFIRE + This driver supports the built-in serial ports of the Motorola ColdFire + family of CPUs. + ++config SERIAL_COLDFIRE_IRDA ++ bool "ColdFire IRDA support" ++ depends on SERIAL_COLDFIRE ++ help ++ This driver supports IRDA on the Motorola ColdFire. ++ + config SERIAL_MCF + bool "Coldfire serial support (new style driver)" + depends on COLDFIRE +--- a/drivers/serial/mcfserial.c ++++ b/drivers/serial/mcfserial.c +@@ -45,7 +45,14 @@ + #include <asm/coldfire.h> + #include <asm/mcfsim.h> + #include <asm/mcfuart.h> ++#if defined(CONFIG_M547X_8X) ++#include <asm/m5485sim.h> ++#include <asm/m5485psc.h> ++#include <asm/m5485gpio.h> ++#endif ++#ifdef CONFIG_NETtel + #include <asm/nettel.h> ++#endif + #include <asm/uaccess.h> + #include "mcfserial.h" + +@@ -61,7 +68,8 @@ struct timer_list mcfrs_timer_struct; + #define CONSOLE_BAUD_RATE 38400 + #define DEFAULT_CBAUD B38400 + #elif defined(CONFIG_MOD5272) || defined(CONFIG_M5208EVB) || \ +- defined(CONFIG_M5329EVB) || defined(CONFIG_GILBARCO) ++ defined(CONFIG_M5329EVB) || defined(CONFIG_GILBARCO) || \ ++ defined(CONFIG_M5445X) || defined(CONFIG_M547X_8X) + #define CONSOLE_BAUD_RATE 115200 + #define DEFAULT_CBAUD B115200 + #elif defined(CONFIG_ARNEWSH) || defined(CONFIG_FREESCALE) || \ +@@ -94,12 +102,17 @@ static struct tty_driver *mcfrs_serial_d + #undef SERIAL_DEBUG_FLOW + + #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ +- defined(CONFIG_M520x) || defined(CONFIG_M532x) ++ defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_M5445X) || \ ++ defined(CONFIG_M547X_8X) + #define IRQBASE (MCFINT_VECBASE+MCFINT_UART0) + #else + #define IRQBASE 73 + #endif + ++#ifdef CONFIG_SERIAL_COLDFIRE_IRDA ++#define SERIAL_IRDA_LINE (2) ++#endif ++ + /* + * Configuration table, UARTs to look for at startup. + */ +@@ -114,7 +127,11 @@ static struct mcf_serial mcfrs_table[] = + { /* ttyS1 */ + .magic = 0, + .addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE2), ++#if defined(CONFIG_M547X_8X) ++ .irq = IRQBASE-1, ++#else + .irq = IRQBASE+1, ++#endif + .flags = ASYNC_BOOT_AUTOCONF, + }, + #endif +@@ -122,7 +139,11 @@ static struct mcf_serial mcfrs_table[] = + { /* ttyS2 */ + .magic = 0, + .addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE3), ++#if defined(CONFIG_M547X_8X) ++ .irq = IRQBASE-2, ++#else + .irq = IRQBASE+2, ++#endif + .flags = ASYNC_BOOT_AUTOCONF, + }, + #endif +@@ -130,7 +151,11 @@ static struct mcf_serial mcfrs_table[] = + { /* ttyS3 */ + .magic = 0, + .addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE4), ++#if defined(CONFIG_M547X_8X) ++ .irq = IRQBASE-3, ++#else + .irq = IRQBASE+3, ++#endif + .flags = ASYNC_BOOT_AUTOCONF, + }, + #endif +@@ -372,6 +397,9 @@ static inline void receive_chars(struct + static inline void transmit_chars(struct mcf_serial *info) + { + volatile unsigned char *uartp; ++#ifdef CONFIG_SERIAL_COLDFIRE_IRDA ++ int i; ++#endif + + uartp = info->addr; + +@@ -383,13 +411,36 @@ static inline void transmit_chars(struct + } + + if ((info->xmit_cnt <= 0) || info->tty->stopped) { ++#ifdef CONFIG_SERIAL_COLDFIRE_IRDA ++ if (info->line == SERIAL_IRDA_LINE) { ++ /* Enable receiver for IRDA */ ++ uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; ++ /* reset RX */ ++ uartp[MCFUART_UCR] = MCFUART_UCR_TXENABLE | MCFUART_UCR_RXENABLE; ++ } ++#endif + info->imr &= ~MCFUART_UIR_TXREADY; + uartp[MCFUART_UIMR] = info->imr; + return; + } + + while (uartp[MCFUART_USR] & MCFUART_USR_TXREADY) { ++#ifdef CONFIG_SERIAL_COLDFIRE_IRDA ++ if (info->line == SERIAL_IRDA_LINE) { ++ while (!(uartp[MCFUART_USR] & MCFUART_USR_TXEMPTY)); ++ i = 0; ++ /* delay for settle */ ++#if defined(CONFIG_M548X) ++ udelay(1); ++#elif defined(CONFIG_M547X) ++ udelay(2); ++#else ++ while (i++ < 25000) udelay(1); ++#endif ++ } ++#endif + uartp[MCFUART_UTB] = info->xmit_buf[info->xmit_tail++]; ++ + info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); + info->stats.tx++; + if (--info->xmit_cnt <= 0) +@@ -409,7 +460,12 @@ irqreturn_t mcfrs_interrupt(int irq, voi + struct mcf_serial *info; + unsigned char isr; + ++/* JKM -- revisit! IRQ compute */ ++#if defined(CONFIG_M547X_8X) ++ info = &mcfrs_table[(IRQBASE - irq)]; ++#else + info = &mcfrs_table[(irq - IRQBASE)]; ++#endif + isr = info->addr[MCFUART_UISR] & info->imr; + + if (isr & MCFUART_UIR_RXREADY) +@@ -541,6 +597,28 @@ static int startup(struct mcf_serial * i + */ + mcfrs_change_speed(info); + ++#ifdef CONFIG_SERIAL_COLDFIRE_IRDA ++ if (info->line == SERIAL_IRDA_LINE) { ++ /* Put PSC in IrDA mode */ ++ MCF_PSC_SICR(info->line) = MCF_PSC_SICR_SIM_SIR; ++ ++ /* Set pulse width to 1.6 uS */ ++ MCF_PSC_IRSDR(info->line) = (uint8_t) ++ (16 * (CONFIG_MCFCLK / 10000000)); ++ MCF_PSC_IRCR1(info->line) = MCF_PSC_IRCR1_SPUL; ++ MCF_PSC_IRCR2(info->line) = 0; ++ ++ /* Enable RTS to send */ ++ MCF_PSC_OPSET(info->line) = MCF_PSC_OPSET_RTS; ++ ++ /* Setup FIFO Alarms */ ++ MCF_PSC_RFAR(info->line) = MCF_PSC_RFAR_ALARM(248); ++ MCF_PSC_TFAR(info->line) = MCF_PSC_TFAR_ALARM(248); ++ ++ MCF_PSC_RFCR(info->line) = MCF_PSC_RFCR_FRMEN | MCF_PSC_RFCR_GR(4); ++ MCF_PSC_TFCR(info->line) = MCF_PSC_TFCR_FRMEN | MCF_PSC_RFCR_GR(4); ++ } ++#endif + /* + * Lastly enable the UART transmitter and receiver, and + * interrupt enables. +@@ -562,10 +640,20 @@ static void shutdown(struct mcf_serial * + { + volatile unsigned char *uartp; + unsigned long flags; ++#ifdef CONFIG_SERIAL_COLDFIRE_IRDA ++ unsigned long delay_counter = 0; ++#endif + + if (!(info->flags & ASYNC_INITIALIZED)) + return; +- ++#ifdef CONFIG_SERIAL_COLDFIRE_IRDA ++ uartp = (volatile unsigned char *) info->addr; ++ while (!(uartp[MCFUART_USR] & MCFUART_USR_TXEMPTY)) { ++ if(delay_counter++ > 25000) ++ break; ++ udelay(10); ++ } ++#endif + #ifdef SERIAL_DEBUG_OPEN + printk("Shutting down serial port %d (irq %d)....\n", info->line, + info->irq); +@@ -794,10 +882,19 @@ static int mcfrs_write(struct tty_struct + + local_irq_disable(); + uartp = info->addr; ++ ++#ifdef CONFIG_SERIAL_COLDFIRE_IRDA ++ if (info->line == SERIAL_IRDA_LINE) { ++ /* Disable IRDA receiver*/ ++ uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */ ++ uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */ ++ ++ uartp[MCFUART_UCR] = MCFUART_UCR_TXENABLE; ++ } ++#endif + info->imr |= MCFUART_UIR_TXREADY; + uartp[MCFUART_UIMR] = info->imr; + local_irq_restore(flags); +- + return total; + } + +@@ -858,9 +955,21 @@ static void mcfrs_throttle(struct tty_st + + if (serial_paranoia_check(info, tty->name, "mcfrs_throttle")) + return; +- ++#ifdef CONFIG_SERIAL_COLDFIRE_IRDA ++ if (I_IXOFF(tty)) { ++ /* Force STOP_CHAR (xoff) out */ ++ volatile unsigned char *uartp; ++ unsigned long flags; ++ uartp = (volatile unsigned char *) info->addr; ++ local_irq_save(flags); ++ info->imr |= MCFUART_UIR_TXREADY; ++ uartp[MCFUART_UIMR] = info->imr; ++ local_irq_restore(flags); ++ } ++#else + if (I_IXOFF(tty)) + info->x_char = STOP_CHAR(tty); ++#endif + + /* Turn off RTS line (do this atomic) */ + } +@@ -881,8 +990,22 @@ static void mcfrs_unthrottle(struct tty_ + if (I_IXOFF(tty)) { + if (info->x_char) + info->x_char = 0; ++#ifdef CONFIG_SERIAL_COLDFIRE_IRDA ++ else { ++ /* Force START_CHAR (xon) out */ ++ volatile unsigned char *uartp; ++ unsigned long flags; ++ info->x_char = START_CHAR(tty); ++ uartp = (volatile unsigned char *) info->addr; ++ local_irq_save(flags); ++ info->imr |= MCFUART_UIR_TXREADY; ++ uartp[MCFUART_UIMR] = info->imr; ++ local_irq_restore(flags); ++ } ++#else + else + info->x_char = START_CHAR(tty); ++#endif + } + + /* Assert RTS line (do this atomic) */ +@@ -1130,12 +1253,17 @@ static int mcfrs_ioctl(struct tty_struct + static void mcfrs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) + { + struct mcf_serial *info = (struct mcf_serial *)tty->driver_data; ++#ifdef CONFIG_SERIAL_COLDFIRE_IRDA ++ int i = 0; /* hush GCC */ ++#endif + + if (tty->termios->c_cflag == old_termios->c_cflag) + return; + ++#ifdef CONFIG_SERIAL_COLDFIRE_IRDA ++ while (i++ < 35000) udelay(1); ++#endif + mcfrs_change_speed(info); +- + if ((old_termios->c_cflag & CRTSCTS) && + !(tty->termios->c_cflag & CRTSCTS)) { + tty->hw_stopped = 0; +@@ -1604,6 +1732,36 @@ static void mcfrs_irqinit(struct mcf_ser + /* GPIOs also must be initalized, depends on board */ + break; + } ++#elif defined(CONFIG_M5445X) ++ volatile unsigned char *uartp; ++ uartp = info->addr; ++ switch (info->line) { ++ case 0: ++ MCF_GPIO_PAR_UART |= 0x000F; ++ break; ++ case 1: ++ MCF_GPIO_PAR_UART |= 0x0FF0; ++ break; ++ case 2: ++ /* GPIOs also must be initalized, depends on board */ ++ break; ++ } ++#elif defined(CONFIG_M547X_8X) ++ volatile unsigned char *uartp; ++ uartp = (volatile unsigned char *)info->addr; ++ ++ if (info->line > 3) { ++ printk("SERIAL: don't know how to handle UART %d interrupt?\n", ++ info->line); ++ return; ++ } ++ ++ /* Set GPIO port register to enable PSC(port) signals */ ++ MCF_PAR_PSCn(info->line) = (0 ++ | MCF_PAR_PSC_TXD ++ | MCF_PAR_PSC_RXD); ++ ++ MCF_ICR(info->irq - 64) = ILP_PSCn(info->line); + #else + volatile unsigned char *icrp, *uartp; + +@@ -1966,7 +2124,9 @@ struct console mcfrs_console = { + + static int __init mcfrs_console_init(void) + { ++#if !(defined(CONFIG_M5445X) || defined(CONFIG_M547X_8X)) + register_console(&mcfrs_console); ++#endif + return 0; + } + +--- /dev/null ++++ b/drivers/spi/coldfire_edma.c +@@ -0,0 +1,446 @@ ++/* ++ * ++ * coldfire_edma.c - eDMA driver for Coldfire MCF5445x ++ * ++ * Yaroslav Vinogradov yaroslav.vinogradov@freescale.com ++ * ++ * Copyright Freescale Semiconductor, Inc. 2007 ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ */ ++ ++#include <linux/init.h> ++#include <linux/module.h> ++#include <asm/virtconvert.h> ++#include <asm/coldfire.h> ++#include <linux/fs.h> ++#include <linux/cdev.h> ++#include <linux/seq_file.h> ++#include <linux/proc_fs.h> ++#ifdef CONFIG_M5445X ++#include <asm/mcf5445x_edma.h> ++#include <asm/mcf5445x_intc.h> ++#endif /* CONFIG_M5445X */ ++#include <asm/coldfire_edma.h> ++ ++/* ++ * Callback handler data for each TCD ++ */ ++struct edma_isr_record { ++ edma_irq_handler irq_handler; /* interrupt handler */ ++ edma_error_handler error_handler; /* error interrupt handler */ ++ void *arg; /* argument to pass back */ ++ int allocated; /* busy flag */ ++ spinlock_t *lock; /* spin lock (optional) */ ++ const char *device_id; /* dev id string, used in procfs */ ++}; ++ ++/* ++ * Device structure ++ */ ++struct coldfire_edma_dev { ++ struct cdev cdev; /* character device */ ++ struct edma_isr_record dma_interrupt_handlers[EDMA_CHANNELS]; ++}; ++ ++/* allocated major device number */ ++static int coldfire_dma_major; ++ ++/* device driver structure */ ++static struct coldfire_edma_dev *devp = NULL; ++ ++/* device driver file operations */ ++struct file_operations coldfire_edma_fops = { ++ .owner = THIS_MODULE, ++}; ++ ++/** ++ * dmaisr - eDMA channel interrupt handler ++ * @irq: interrupt number ++ * @dev_id: argument ++ */ ++static int dmaisr(int irq, void *dev_id) ++{ ++ int channel = irq - EDMA_INT_CONTROLLER_BASE - EDMA_INT_CHANNEL_BASE; ++ int result = IRQ_HANDLED; ++ ++ if ((devp != NULL) && ++ (devp->dma_interrupt_handlers[channel].irq_handler)) { ++ /* call user irq handler */ ++ if (devp->dma_interrupt_handlers[channel].lock) ++ spin_lock(devp->dma_interrupt_handlers[channel].lock); ++ ++ result = devp->dma_interrupt_handlers[channel].irq_handler( ++ channel, devp->dma_interrupt_handlers[channel].arg); ++ ++ if (devp->dma_interrupt_handlers[channel].lock) ++ spin_unlock(devp->dma_interrupt_handlers[channel].lock); ++ } else { ++ /* no irq handler so just ack it */ ++ confirm_edma_interrupt_handled(channel); ++ printk(EDMA_DRIVER_NAME ": No handler for DMA channel %d\n", ++ channel); ++ } ++ ++ return result; ++} ++ ++/** ++ * dma_error_isr - eDMA error interrupt handler ++ * @irq: interrupt number ++ * @dev_id: argument ++ */ ++static int dma_error_isr(int irq, void* dev_id) ++{ ++ u16 err; ++ int i; ++ ++ err = MCF_EDMA_ERR; ++ for (i=0; i<EDMA_CHANNELS; i++) { ++ if (err & (1<<i)) { ++ if (devp!=NULL && devp->dma_interrupt_handlers[i].error_handler) ++ devp->dma_interrupt_handlers[i].error_handler(i, devp->dma_interrupt_handlers[i].arg); ++ else ++ printk(KERN_WARNING EDMA_DRIVER_NAME ": DMA error on channel %d\n", i); ++ } ++ } ++ ++ MCF_EDMA_CERR = MCF_EDMA_CERR_CAER; ++ return IRQ_HANDLED; ++} ++ ++/** ++ * set_edma_params - Set transfer control descriptor (TCD) ++ * @channel: channel number ++ * @source: source address ++ * @dest: destination address ++ * @attr: attributes ++ * @soff: source offset ++ * @nbytes: number of bytes to be transfered in minor loop ++ * @slast: last source address adjustment ++ * @citer: major loop count ++ * @biter: beginning minor loop count ++ * @doff: destination offset ++ * @dlast_sga: last destination address adjustment ++ * @major_int: generate interrupt after each major loop ++ * @disable_req: disable DMA request after major loop ++ */ ++void set_edma_params(int channel, u32 source, u32 dest, ++ u32 attr, u32 soff, u32 nbytes, u32 slast, ++ u32 citer, u32 biter, u32 doff, u32 dlast_sga, ++ int major_int, int disable_req) ++{ ++ ++ if (channel<0 || channel>EDMA_CHANNELS) ++ return; ++ ++ MCF_EDMA_TCD_SADDR(channel) = source; ++ MCF_EDMA_TCD_DADDR(channel) = dest; ++ MCF_EDMA_TCD_ATTR(channel) = attr; ++ MCF_EDMA_TCD_SOFF(channel) = MCF_EDMA_TCD_SOFF_SOFF(soff); ++ MCF_EDMA_TCD_NBYTES(channel) = MCF_EDMA_TCD_NBYTES_NBYTES(nbytes); ++ MCF_EDMA_TCD_SLAST(channel) = MCF_EDMA_TCD_SLAST_SLAST(slast); ++ MCF_EDMA_TCD_CITER(channel) = MCF_EDMA_TCD_CITER_CITER(citer); ++ MCF_EDMA_TCD_BITER(channel)=MCF_EDMA_TCD_BITER_BITER(biter); ++ MCF_EDMA_TCD_DOFF(channel) = MCF_EDMA_TCD_DOFF_DOFF(doff); ++ MCF_EDMA_TCD_DLAST_SGA(channel) = MCF_EDMA_TCD_DLAST_SGA_DLAST_SGA(dlast_sga); ++ ++ /* interrupt at the end of major loop */ ++ if (major_int) ++ MCF_EDMA_TCD_CSR(channel) |= MCF_EDMA_TCD_CSR_INT_MAJOR; ++ else ++ MCF_EDMA_TCD_CSR(channel) &= ~MCF_EDMA_TCD_CSR_INT_MAJOR; ++ ++ /* disable request at the end of major loop of transfer or not*/ ++ if (disable_req) ++ MCF_EDMA_TCD_CSR(channel) |= MCF_EDMA_TCD_CSR_D_REQ; ++ else ++ MCF_EDMA_TCD_CSR(channel) &= ~MCF_EDMA_TCD_CSR_D_REQ; ++} ++EXPORT_SYMBOL(set_edma_params); ++ ++/** ++ * init_edma - Initialize the eDMA controller ++ */ ++void init_edma(void) ++{ ++ MCF_EDMA_CR = 0; ++} ++EXPORT_SYMBOL(init_edma); ++ ++/** ++ * request_edma_channel - Request an eDMA channel ++ * @channel: channel number ++ * @handler: dma handler ++ * @error_handler: dma error handler ++ * @arg: argument to pass back ++ * @lock: optional spinlock to hold over interrupt ++ * @device_id: device id ++ * ++ * Returns 0 if success or a negative value if failure ++ */ ++int request_edma_channel(int channel, ++ edma_irq_handler handler, ++ edma_error_handler error_handler, ++ void *arg, ++ spinlock_t *lock, ++ const char *device_id ) ++{ ++ if (devp!=NULL && channel>=0 && channel<=EDMA_CHANNELS) { ++ if (devp->dma_interrupt_handlers[channel].allocated) ++ return -EBUSY; ++ ++ devp->dma_interrupt_handlers[channel].allocated = 1; ++ devp->dma_interrupt_handlers[channel].irq_handler = handler; ++ devp->dma_interrupt_handlers[channel].error_handler = error_handler; ++ devp->dma_interrupt_handlers[channel].arg = arg; ++ devp->dma_interrupt_handlers[channel].lock = lock; ++ devp->dma_interrupt_handlers[channel].device_id = device_id; ++ return 0; ++ } ++ return -EINVAL; ++} ++EXPORT_SYMBOL(request_edma_channel); ++ ++/** ++ * set_edma_callback - Update the channel callback/arg ++ * @channel: channel number ++ * @handler: dma handler ++ * @error_handler: dma error handler ++ * @arg: argument to pass back ++ * ++ * Returns 0 if success or a negative value if failure ++ */ ++int set_edma_callback(int channel, ++ edma_irq_handler handler, ++ edma_error_handler error_handler, ++ void *arg ) ++{ ++ if (devp!=NULL && channel>=0 && channel<=EDMA_CHANNELS && ++ devp->dma_interrupt_handlers[channel].allocated) { ++ devp->dma_interrupt_handlers[channel].irq_handler = handler; ++ devp->dma_interrupt_handlers[channel].error_handler = error_handler; ++ devp->dma_interrupt_handlers[channel].arg = arg; ++ return 0; ++ } ++ return -EINVAL; ++} ++EXPORT_SYMBOL(set_edma_callback); ++ ++/** ++ * free_edma_channel - Free the edma channel ++ * @channel: channel number ++ * @arg: argument created with ++ * ++ * Returns 0 if success or a negative value if failure ++ */ ++int free_edma_channel(int channel, void *arg) ++{ ++ if (devp!=NULL && channel>=0 && channel<=EDMA_CHANNELS) { ++ if (devp->dma_interrupt_handlers[channel].allocated) { ++#if 0 ++ if (devp->dma_interrupt_handlers[channel].arg != arg) ++ return -EBUSY; ++#endif ++ ++ devp->dma_interrupt_handlers[channel].allocated = 0; ++ devp->dma_interrupt_handlers[channel].arg = NULL; ++ devp->dma_interrupt_handlers[channel].irq_handler = NULL; ++ devp->dma_interrupt_handlers[channel].error_handler = NULL; ++ devp->dma_interrupt_handlers[channel].lock = NULL; ++ } ++ return 0; ++ } ++ return -EINVAL; ++} ++EXPORT_SYMBOL(free_edma_channel); ++ ++/** ++ * coldfire_edma_cleanup - cleanup driver allocated resources ++ */ ++static void coldfire_edma_cleanup(void) ++{ ++ dev_t devno; ++ int i; ++ ++ /* free interrupts/memory */ ++ if (devp) { ++ for (i=0; i<EDMA_CHANNELS; i++) ++ free_irq(EDMA_INT_BASE+i, devp); ++ ++ free_irq(EDMA_INT_BASE+EDMA_INT_ERR, devp); ++ cdev_del(&devp->cdev); ++ kfree(devp); ++ } ++ ++ /* unregister character device */ ++ devno = MKDEV(coldfire_dma_major, 0); ++ unregister_chrdev_region(devno, 1); ++} ++ ++#ifdef CONFIG_PROC_FS ++/* ++ * proc file system support ++ */ ++ ++#define FREE_CHANNEL "free" ++#define DEVICE_UNKNOWN "device unknown" ++ ++/** ++ * proc_edma_show - print out proc info ++ * @m: seq_file ++ * @v: ++ */ ++static int proc_edma_show(struct seq_file *m, void *v) ++{ ++ int i; ++ ++ if (devp == NULL) ++ return 0; ++ ++ for (i = 0 ; i < EDMA_CHANNELS ; i++) { ++ if (devp->dma_interrupt_handlers[i].allocated) { ++ if (devp->dma_interrupt_handlers[i].device_id) ++ seq_printf(m, "%2d: %s\n", i, devp->dma_interrupt_handlers[i].device_id); ++ else ++ seq_printf(m, "%2d: %s\n", i, DEVICE_UNKNOWN); ++ } else ++ seq_printf(m, "%2d: %s\n", i, FREE_CHANNEL); ++ } ++ return 0; ++} ++ ++/** ++ * proc_edma_open - open the proc file ++ * @inode: inode ptr ++ * @file: file ptr ++ */ ++static int proc_edma_open(struct inode *inode, struct file *file) ++{ ++ return single_open(file, proc_edma_show, NULL); ++} ++ ++static const struct file_operations proc_edma_operations = { ++ .open = proc_edma_open, ++ .read = seq_read, ++ .llseek = seq_lseek, ++ .release = single_release, ++}; ++ ++/** ++ * proc_edma_init - initialize proc filesystem ++ */ ++static int __init proc_edma_init(void) ++{ ++ struct proc_dir_entry *e; ++ ++ e = create_proc_entry("edma", 0, NULL); ++ if (e) ++ e->proc_fops = &proc_edma_operations; ++ ++ return 0; ++} ++ ++#endif ++ ++/** ++ * coldfire_edma_init - eDMA module init ++ */ ++static int __init coldfire_edma_init(void) ++{ ++ dev_t dev; ++ int result; ++ int i; ++ ++ /* allocate free major number */ ++ result = alloc_chrdev_region(&dev, DMA_DEV_MINOR, 1, EDMA_DRIVER_NAME); ++ if (result < 0) { ++ printk(KERN_WARNING EDMA_DRIVER_NAME": can't get major %d\n", ++ result); ++ return result; ++ } ++ coldfire_dma_major = MAJOR(dev); ++ ++ /* allocate device driver structure */ ++ devp = kmalloc(sizeof(struct coldfire_edma_dev), GFP_KERNEL); ++ if (!devp) { ++ result = -ENOMEM; ++ goto fail; ++ } ++ ++ /* init handlers (no handlers for beginning) */ ++ for (i = 0; i < EDMA_CHANNELS; i++) { ++ devp->dma_interrupt_handlers[i].irq_handler = NULL; ++ devp->dma_interrupt_handlers[i].error_handler = NULL; ++ devp->dma_interrupt_handlers[i].arg = NULL; ++ devp->dma_interrupt_handlers[i].allocated = 0; ++ devp->dma_interrupt_handlers[i].lock = NULL; ++ devp->dma_interrupt_handlers[i].device_id = NULL; ++ } ++ ++ /* register char device */ ++ cdev_init(&devp->cdev, &coldfire_edma_fops); ++ devp->cdev.owner = THIS_MODULE; ++ devp->cdev.ops = &coldfire_edma_fops; ++ result = cdev_add(&devp->cdev, dev, 1); ++ if (result) { ++ printk(KERN_NOTICE EDMA_DRIVER_NAME ++ ": Error %d adding coldfire-dma device\n", result); ++ result = -ENODEV; ++ goto fail; ++ } ++ ++ /* request/enable irq for each eDMA channel */ ++ for (i = 0; i < EDMA_CHANNELS;i++) { ++ result = request_irq(EDMA_INT_BASE + i, ++ dmaisr, IRQF_DISABLED, ++ EDMA_DRIVER_NAME, devp); ++ if (result) { ++ printk(KERN_WARNING EDMA_DRIVER_NAME ++ ": Cannot request irq %d\n", ++ (EDMA_INT_BASE + EDMA_INT_ERR+i)); ++ result = -EBUSY; ++ goto fail; ++ } ++ } ++ ++ /* request error interrupt */ ++ result = request_irq(EDMA_INT_BASE + EDMA_INT_ERR, ++ dma_error_isr, IRQF_DISABLED, ++ EDMA_DRIVER_NAME, devp); ++ if (result) { ++ printk(KERN_WARNING EDMA_DRIVER_NAME ++ ": Cannot request irq %d\n", ++ (EDMA_INT_BASE + EDMA_INT_ERR)); ++ result = -EBUSY; ++ goto fail; ++ } ++ ++#ifdef CONFIG_PROC_FS ++ proc_edma_init(); ++#endif ++ ++ printk(EDMA_DRIVER_NAME ": initialized successfully\n"); ++ return 0; ++fail: ++ coldfire_edma_cleanup(); ++ return result; ++} ++ ++/** ++ * coldfire_edma_exit - eDMA module exit ++ */ ++static void __exit coldfire_edma_exit(void) ++{ ++ coldfire_edma_cleanup(); ++} ++ ++module_init(coldfire_edma_init); ++module_exit(coldfire_edma_exit); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Freescale Semiconductor, Inc."); ++MODULE_DESCRIPTION("eDMA library for Coldfire M5445x"); +--- /dev/null ++++ b/drivers/spi/dspi_mcf.c +@@ -0,0 +1,1217 @@ ++/* ++ * dspi_mcf.c - DSPI controller for ColdFire processors ++ * ++ * ++ * Matt Waddel Matt.Waddel@freescale.com ++ * Copyright Freescale Semiconductor, Inc. 2008 ++ * ++ * M547x/M548x changes by Kurt Mahan kmahan@freescale.com ++ * Copyright Freescale Semiconductor, Inc. 2008 ++ * ++ * Based on spi_coldfire.c done by: ++ * Andrey Butok ++ * Yaroslav Vinogradov ++ * Copyright Freescale Semiconductor, Inc. 2006-2007 ++ * Mike Lavender (mike@steroidmicros) ++ * (C) Copyright 2005, Intec Automation, ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ * ++ *************************************************************************** ++ * Changes: ++ * v0.002 M547x/M548x support. ++ * v0.001 Initial version. Coldfire DSPI master driver. ++ ****************************************************************************/ ++ ++/* ++ * Includes ++ */ ++ ++#include <linux/autoconf.h> ++#include <linux/init.h> ++#include <linux/module.h> ++#include <linux/device.h> ++#include <linux/interrupt.h> ++#include <linux/platform_device.h> ++#include <linux/spi/spi.h> ++#include <linux/workqueue.h> ++#include <linux/delay.h> ++#include <asm/mcfsim.h> ++#include <asm/mcfqspi.h> ++#include <asm/coldfire.h> ++#include <linux/io.h> ++#include <asm/mcfdspi.h> ++#include <linux/dma-mapping.h> ++ ++#undef DSPI_COLDFIRE_DEBUG ++ ++#ifdef DSPI_COLDFIRE_DEBUG ++#define DBG(fmt, args...) \ ++ printk(KERN_INFO "[%s] " fmt , __FUNCTION__, ## args) ++#else ++#define DBG(fmt, args...) do {} while (0) ++#endif ++ ++#if defined(CONFIG_M54455) ++#include <asm/mcf5445x_dspi.h> ++#if defined(CONFIG_SPI_COLDFIRE_DSPI_EDMA) ++ #include <asm/mcf5445x_edma.h> ++#endif ++#endif ++ ++#if defined(CONFIG_M547X_8X) ++#include <asm/virtconvert.h> ++#include <asm/m5485dspi.h> ++#endif ++ ++#if defined(CONFIG_SPI_COLDFIRE_DSPI_EDMA) ++#include <asm/mcf_edma.h> ++#define SPI_DSPI_EDMA ++#define EDMA_BUFSIZE_KMALLOC (DSPI_FIFO_SIZE*4) ++#define DSPI_DMA_RX_TCD MCF_EDMA_CHAN_DSPI_RX ++#define DSPI_DMA_TX_TCD MCF_EDMA_CHAN_DSPI_TX ++#endif ++ ++#define DSPI_BITS MCF_DSPI_DCTAR_FMSZ(0xF) ++#define DSPI_BITS_16 MCF_DSPI_DCTAR_FMSZ(0xF) ++#define DSPI_BITS_8 MCF_DSPI_DCTAR_FMSZ(0x7) ++#define DSPI_FIFO_SIZE 16 ++ ++#define DRIVER_NAME "Coldfire DSPI" ++ ++/****************************************************************************/ ++ ++/* ++ * Local constants and macros ++ */ ++ ++#define START_STATE ((void *)0) ++#define RUNNING_STATE ((void *)1) ++#define DONE_STATE ((void *)2) ++#define ERROR_STATE ((void *)-1) ++ ++#define QUEUE_RUNNING 0 ++#define QUEUE_STOPPED 1 ++ ++/****************************************************************************/ ++ ++/* ++ * Local Data Structures ++ */ ++ ++struct DSPI_MCR { ++ unsigned master:1; ++ unsigned cont_scke:1; ++ unsigned dconf:2; ++ unsigned frz:1; ++ unsigned mtfe:1; ++ unsigned pcsse:1; ++ unsigned rooe:1; ++ unsigned pcsis:8; ++ unsigned reserved15:1; ++ unsigned mdis:1; ++ unsigned dis_tx:1; ++ unsigned dis_rxf:1; ++ unsigned clr_tx:1; ++ unsigned clr_rxf:1; ++ unsigned smpl_pt:2; ++ unsigned reserved71:7; ++ unsigned halt:1; ++}; ++ ++struct DSPI_CTAR { ++ unsigned dbr:1; ++ unsigned fmsz:4; ++ unsigned cpol:1; ++ unsigned cpha:1; ++ unsigned lsbfe:1; ++ unsigned pcssck:2; ++ unsigned pasc:2; ++ unsigned pdt:2; ++ unsigned pbr:2; ++ unsigned cssck:4; ++ unsigned asc:4; ++ unsigned dt:4; ++ unsigned br:4; ++}; ++ ++struct chip_data { ++ /* dspi data */ ++ union { ++ u32 mcr_val; ++ struct DSPI_MCR mcr; ++ }; ++ union { ++ u32 ctar_val; ++ struct DSPI_CTAR ctar; ++ }; ++ u16 void_write_data; ++}; ++ ++ ++struct driver_data { ++ /* Driver model hookup */ ++ struct platform_device *pdev; ++ ++ /* SPI framework hookup */ ++ struct spi_master *master; ++ ++ /* Driver message queue */ ++ struct workqueue_struct *workqueue; ++ struct work_struct pump_messages; ++ spinlock_t lock; /* lock */ ++ struct list_head queue; ++ int busy; ++ int run; ++ ++ /* Message Transfer pump */ ++ struct tasklet_struct pump_transfers; ++ ++ /* Current message transfer state info */ ++ struct spi_message *cur_msg; ++ struct spi_transfer *cur_transfer; ++ struct chip_data *cur_chip; ++ size_t len; ++ void *tx; ++ void *tx_end; ++ void *rx; ++ void *rx_end; ++ char flags; ++#define TRAN_STATE_RX_VOID 0x01 ++#define TRAN_STATE_TX_VOID 0x02 ++#define TRAN_STATE_WORD_ODD_NUM 0x04 ++ u8 cs; ++ u16 void_write_data; ++ unsigned cs_change:1; ++ ++ u32 trans_cnt; ++ u32 wce_cnt; ++ u32 abrt_cnt; ++ u32 *mcr; /* DSPI MCR register */ ++ u32 *ctar; /* DSPI CTAR register */ ++ u32 *dspi_dtfr; /* DSPI DTFR register */ ++ u32 *dspi_drfr; /* DSPI DRFR register */ ++ u32 *dspi_rser; /* DSPI RSER register */ ++ u32 *dspi_sr; /* DSPI status register */ ++ ++#if defined(SPI_DSPI_EDMA) ++ void *edma_tx_buf; ++ void *edma_rx_buf; ++#endif ++ ++#if defined(CONFIG_M532x) || defined(CONFIG_M537x) ++ u16 *par; /* Pin assignment register */ ++#else ++ u8 *par; /* Pin assignment register */ ++#endif ++ u8 *int_icr; /* Interrupt level and priority register */ ++ u32 *int_mr; /* Interrupt mask register */ ++ void (*cs_control)(u8 cs, u8 command); ++}; ++ ++#define DSPI_CS(cs) ((1<<(cs))<<16) ++ ++/****************************************************************************/ ++ ++/* ++ * SPI local functions ++ */ ++ ++static void *next_transfer(struct driver_data *drv_data) ++{ ++ struct spi_message *msg = drv_data->cur_msg; ++ struct spi_transfer *trans = drv_data->cur_transfer; ++ ++ DBG("\n"); ++ /* Move to next transfer */ ++ if (trans->transfer_list.next != &msg->transfers) { ++ drv_data->cur_transfer = list_entry(trans->transfer_list.next, ++ struct spi_transfer, ++ transfer_list); ++ ++ if (drv_data->cur_transfer->transfer_list.next ++ == &msg->transfers) /* last transfer */ ++ drv_data->cur_transfer->cs_change = 1; ++ ++ return RUNNING_STATE; ++ } else ++ return DONE_STATE; ++} ++ ++ ++static inline int is_word_transfer(struct driver_data *drv_data) ++{ ++ return ((*(drv_data->ctar+drv_data->cs) & DSPI_BITS_16) == ++ DSPI_BITS_8) ? 0 : 1; ++} ++ ++static inline void set_8bit_transfer_mode(struct driver_data *drv_data) ++{ ++ DBG("\n"); ++ *(drv_data->ctar+drv_data->cs) = ++ (*(drv_data->ctar + drv_data->cs) & ~DSPI_BITS) | DSPI_BITS_8; ++} ++ ++static inline void set_16bit_transfer_mode(struct driver_data *drv_data) ++{ ++ DBG("\n"); ++ *(drv_data->ctar+drv_data->cs) = ++ (*(drv_data->ctar + drv_data->cs) & ~DSPI_BITS) | DSPI_BITS_16; ++} ++ ++static unsigned char hz_to_spi_baud(int pbr, int dbr, int speed_hz) ++{ ++ int pbr_tbl[4] = {2, 3, 5, 7}; /* Valid baud rate pre-scaler values */ ++ int brs[16] = { 2, 4, 6, 8, ++ 16, 32, 64, 128, ++ 256, 512, 1024, 2048, ++ 4096, 8192, 16384, 32768 }; ++ int temp, index = 0; ++ ++ if ((pbr < 0) || (pbr > 3) || ++ (dbr < 0) || (dbr > 1)) ++ return 15; /* table indexes out of range, go slow */ ++ ++ temp = ((((MCF_CLK / 2) / pbr_tbl[pbr]) * (1 + dbr)) / speed_hz); ++ ++ while (temp >= brs[index]) ++ if (index++ >= 15) ++ break; ++ ++ DBG("baud rate scaler = 0x%x - %d\n", index, brs[index]); ++ return(index); ++} ++ ++static int write(struct driver_data *drv_data) ++{ ++ int tx_count = 0; ++ int tx_word = is_word_transfer(drv_data); ++ u16 d16; ++ u8 d8; ++ u32 dspi_pushr = 0; ++ int first = 1; ++#if defined(SPI_DSPI_EDMA) ++ u32 *edma_wr = (u32 *)(drv_data->edma_tx_buf); ++#endif ++ ++ /* If we are in word mode, but only have a single byte to transfer ++ * then switch to byte mode temporarily. Will switch back at the ++ * end of the transfer. */ ++ if (tx_word && ((drv_data->tx_end - drv_data->tx) == 1)) { ++ drv_data->flags |= TRAN_STATE_WORD_ODD_NUM; ++ set_8bit_transfer_mode(drv_data); ++ tx_word = 0; ++ } ++ ++ while ((drv_data->tx < drv_data->tx_end) && (tx_count < DSPI_FIFO_SIZE)) { ++// DBG("while\n"); ++ if (tx_word) { ++ if ((drv_data->tx_end - drv_data->tx) == 1) ++ break; ++ ++ if (!(drv_data->flags & TRAN_STATE_TX_VOID)) ++ d16 = *(u16 *)drv_data->tx; ++ else ++ d16 = drv_data->void_write_data; ++ ++ dspi_pushr = MCF_DSPI_DTFR_TXDATA(d16) | ++ DSPI_CS(drv_data->cs) | ++ MCF_DSPI_DTFR_CTAS(drv_data->cs) | ++ MCF_DSPI_DTFR_CONT; ++ ++ drv_data->tx += 2; ++ } else { ++ if (!(drv_data->flags & TRAN_STATE_TX_VOID)) ++ d8 = *(u8 *)drv_data->tx; ++ else ++ d8 = *(u8 *)&drv_data->void_write_data; ++ ++ dspi_pushr = MCF_DSPI_DTFR_TXDATA(d8) | ++ DSPI_CS(drv_data->cs) | ++ MCF_DSPI_DTFR_CTAS(drv_data->cs) | ++ MCF_DSPI_DTFR_CONT; ++ ++ drv_data->tx++; ++ } ++ ++ if (drv_data->tx == drv_data->tx_end ++ || tx_count == DSPI_FIFO_SIZE-1) { ++ /* last transfer in the queue */ ++ dspi_pushr |= MCF_DSPI_DTFR_EOQ; ++ if ((drv_data->cs_change) ++ && (drv_data->tx == drv_data->tx_end)) ++ dspi_pushr &= ~MCF_DSPI_DTFR_CONT; ++#ifdef CONFIG_M547X_8X ++ /* EOQ gets missed if we don't delay */ ++ udelay(100); ++#endif ++ } else if (tx_word && ((drv_data->tx_end - drv_data->tx) == 1)) ++ dspi_pushr |= MCF_DSPI_DTFR_EOQ; ++ ++ if (first) { ++ first = 0; ++ dspi_pushr |= MCF_DSPI_DTFR_CTCNT; /* clear counter */ ++ } ++#if defined(SPI_DSPI_EDMA) ++ *edma_wr = dspi_pushr; ++ edma_wr++; ++#else ++ *drv_data->dspi_dtfr = dspi_pushr; ++#endif ++ tx_count++; ++ } ++ ++#if defined(SPI_DSPI_EDMA) ++ if (tx_count > 0) { ++ ++ mcf_edma_set_tcd_params(DSPI_DMA_TX_TCD, ++ virt_to_phys(drv_data->edma_tx_buf), ++ (u32)drv_data->dspi_dtfr, ++ MCF_EDMA_TCD_ATTR_SSIZE_32BIT ++ | MCF_EDMA_TCD_ATTR_DSIZE_32BIT, ++ 4, /* soff */ ++ 4 * tx_count, /* nbytes */ ++ 0, /* slast */ ++ 1, /* citer */ ++ 1, /* biter */ ++ 0, /* doff */ ++ 0, /* dlastsga */ ++ 0, /* major_int */ ++ 1); /* disable_req */ ++ ++ mcf_edma_set_tcd_params(DSPI_DMA_RX_TCD, ++ (u32)drv_data->dspi_drfr, ++ virt_to_phys(drv_data->edma_rx_buf), ++ MCF_EDMA_TCD_ATTR_SSIZE_32BIT ++ | MCF_EDMA_TCD_ATTR_DSIZE_32BIT, ++ 0, /* soff */ ++ 4 * tx_count, /* nbytes */ ++ 0, /* slast */ ++ 1, /* citer */ ++ 1, /* biter */ ++ 4, /* doff */ ++ 0, /* dlastsga */ ++ 0, /* major_int */ ++ 1); /* disable_req */ ++ ++ mcf_edma_start_transfer(DSPI_DMA_TX_TCD); ++ } ++#endif ++ return (tx_count * (tx_word + 1)); ++} ++ ++static int read(struct driver_data *drv_data) ++{ ++ int rx_count = 0; ++ int rx_word = is_word_transfer(drv_data); ++ u16 d; ++#if defined(SPI_DSPI_EDMA) ++ u32 *rx_edma = (u32 *) drv_data->edma_rx_buf; ++ ++ /* receive SPI data */ ++ mcf_edma_start_transfer(DSPI_DMA_RX_TCD); ++#endif ++ while ((drv_data->rx < drv_data->rx_end) ++ && (rx_count < DSPI_FIFO_SIZE)) { ++ ++ if (rx_word) { ++ if ((drv_data->rx_end - drv_data->rx) == 1) ++ break; ++#if defined(SPI_DSPI_EDMA) ++ d = MCF_DSPI_DRFR_RXDATA(*rx_edma); ++ rx_edma++; ++#else ++ d = MCF_DSPI_DRFR_RXDATA(*drv_data->dspi_drfr); ++#endif ++ if (!(drv_data->flags & TRAN_STATE_RX_VOID)) ++ *(u16 *)drv_data->rx = d; ++ drv_data->rx += 2; ++ ++ } else { ++#if defined(SPI_DSPI_EDMA) ++ d = MCF_DSPI_DRFR_RXDATA(*rx_edma); ++ rx_edma++; ++#else ++ d = MCF_DSPI_DRFR_RXDATA(*drv_data->dspi_drfr); ++#endif ++ if (!(drv_data->flags & TRAN_STATE_RX_VOID)) ++ *(u8 *)drv_data->rx = d; ++ drv_data->rx++; ++ } ++ rx_count++; ++ DBG("rxd=0x%x\n", d); ++ } ++ return rx_count; ++} ++ ++ ++static inline void dspi_setup_chip(struct driver_data *drv_data) ++{ ++ struct chip_data *chip = drv_data->cur_chip; ++ ++ DBG("\n"); ++ *drv_data->mcr = chip->mcr_val; ++ *(drv_data->ctar+drv_data->cs) = chip->ctar_val; ++ *drv_data->dspi_rser = MCF_DSPI_DRSER_EOQFE; ++} ++ ++#if defined(SPI_DSPI_EDMA) ++static int edma_tx_handler(int channel, void *dev) ++{ ++ DBG("\n"); ++ if (channel == DSPI_DMA_TX_TCD) ++ mcf_edma_stop_transfer(DSPI_DMA_TX_TCD); ++ return IRQ_HANDLED; ++} ++ ++static int edma_rx_handler(int channel, void *dev) ++{ ++ DBG("\n"); ++ if (channel == DSPI_DMA_RX_TCD) ++ mcf_edma_stop_transfer(DSPI_DMA_RX_TCD); ++ return IRQ_HANDLED; ++} ++#endif ++ ++static irqreturn_t dspi_interrupt(int irq, void *dev_id) ++{ ++ struct driver_data *drv_data = (struct driver_data *)dev_id; ++ struct spi_message *msg = drv_data->cur_msg; ++ ++ /* Clear all flags immediately */ ++ *drv_data->dspi_sr = MCF_DSPI_DSR_EOQF; ++ ++ if (!drv_data->cur_msg || !drv_data->cur_msg->state) { ++#if !defined(SPI_DSPI_EDMA) ++ u32 irq_status = *drv_data->dspi_sr; ++ /* if eDMA is used it happens some time (at least once)*/ ++ printk(KERN_ERR "Bad message or transfer state handler. \ ++ IRQ status = %x\n", irq_status); ++#endif ++ return IRQ_NONE; ++ } ++ ++ DBG("\n"); ++ /* ++ * Read the data into the buffer and reload and start ++ * queue with new data if not finished. If finished ++ * then setup the next transfer ++ */ ++ read(drv_data); ++ ++ if (drv_data->rx == drv_data->rx_end) { ++ /* ++ * Finished now - fall through and schedule next ++ * transfer tasklet ++ */ ++ if (drv_data->flags & TRAN_STATE_WORD_ODD_NUM) ++ set_16bit_transfer_mode(drv_data); ++ ++ msg->state = next_transfer(drv_data); ++ } else { ++ /* not finished yet - keep going */ ++ msg->actual_length += write(drv_data); ++ return IRQ_HANDLED; ++ } ++ ++ tasklet_schedule(&drv_data->pump_transfers); ++ ++ return IRQ_HANDLED; ++} ++ ++/* caller already set message->status; dma and pio irqs are blocked */ ++static void giveback(struct driver_data *drv_data) ++{ ++ struct spi_transfer *last_transfer; ++ unsigned long flags; ++ struct spi_message *msg; ++ DBG("\n"); ++ ++ spin_lock_irqsave(&drv_data->lock, flags); ++ msg = drv_data->cur_msg; ++ drv_data->cur_msg = NULL; ++ drv_data->cur_transfer = NULL; ++ drv_data->cur_chip = NULL; ++ queue_work(drv_data->workqueue, &drv_data->pump_messages); ++ spin_unlock_irqrestore(&drv_data->lock, flags); ++ ++ last_transfer = list_entry(msg->transfers.prev, ++ struct spi_transfer, transfer_list); ++ ++ if (!last_transfer->cs_change) ++ drv_data->cs_control(drv_data->cs, QSPI_CS_DROP); ++ ++ msg->state = NULL; ++ if (msg->complete) ++ msg->complete(msg->context); ++} ++ ++ ++static void pump_transfers(unsigned long data) ++{ ++ struct driver_data *drv_data = (struct driver_data *)data; ++ struct spi_message *message = NULL; ++ struct spi_transfer *transfer = NULL; ++ struct spi_transfer *previous = NULL; ++ struct chip_data *chip = NULL; ++ unsigned long flags; ++ DBG("\n"); ++ /* Get current state information */ ++ message = drv_data->cur_msg; ++ transfer = drv_data->cur_transfer; ++ chip = drv_data->cur_chip; ++ ++ /* Handle for abort */ ++ if (message->state == ERROR_STATE) { ++ message->status = -EIO; ++ giveback(drv_data); ++ return; ++ } ++ ++ /* Handle end of message */ ++ if (message->state == DONE_STATE) { ++ message->status = 0; ++ giveback(drv_data); ++ return; ++ } ++ ++ if (message->state == START_STATE) { ++ dspi_setup_chip(drv_data); ++ ++ if (drv_data->cs_control) ++ drv_data->cs_control(message->spi->chip_select, ++ QSPI_CS_ASSERT); ++ } ++ ++ /* Delay if requested at end of transfer*/ ++ if (message->state == RUNNING_STATE) { ++ previous = list_entry(transfer->transfer_list.prev, ++ struct spi_transfer, ++ transfer_list); ++ ++ if (drv_data->cs_control && transfer->cs_change) ++ drv_data->cs_control(message->spi->chip_select, ++ QSPI_CS_DROP); ++ ++ if (previous->delay_usecs) ++ udelay(previous->delay_usecs); ++ ++ if (drv_data->cs_control && transfer->cs_change) ++ drv_data->cs_control(message->spi->chip_select, ++ QSPI_CS_ASSERT); ++ } ++ ++ drv_data->flags = 0; ++ drv_data->tx = (void *)transfer->tx_buf; ++ drv_data->tx_end = drv_data->tx + transfer->len; ++ drv_data->rx = transfer->rx_buf; ++ drv_data->rx_end = drv_data->rx + transfer->len; ++ ++ if (!drv_data->rx) ++ drv_data->flags |= TRAN_STATE_RX_VOID; ++ if (!drv_data->tx) ++ drv_data->flags |= TRAN_STATE_TX_VOID; ++ drv_data->cs = message->spi->chip_select; ++ drv_data->cs_change = transfer->cs_change; ++ drv_data->void_write_data = chip->void_write_data; ++ if (transfer->speed_hz) { ++ *(drv_data->ctar + drv_data->cs) = \ ++ ((chip->ctar_val & ~0xF) | \ ++ hz_to_spi_baud(chip->ctar.pbr, \ ++ chip->ctar.dbr, \ ++ transfer->speed_hz)); ++ } ++ ++ message->state = RUNNING_STATE; ++ /* Go baby, go */ ++ local_irq_save(flags); ++ message->actual_length += write(drv_data); ++ local_irq_restore(flags); ++} ++ ++ ++static void pump_messages(struct work_struct *work) ++{ ++ struct driver_data *drv_data; ++ unsigned long flags; ++ DBG("\n"); ++ ++ drv_data = container_of(work, struct driver_data, pump_messages); ++ ++ /* Lock queue and check for queue work */ ++ spin_lock_irqsave(&drv_data->lock, flags); ++ if (list_empty(&drv_data->queue) ++ || drv_data->run == QUEUE_STOPPED) { ++ drv_data->busy = 0; ++ spin_unlock_irqrestore(&drv_data->lock, flags); ++ return; ++ } ++ ++ /* Make sure we are not already running a message */ ++ if (drv_data->cur_msg) { ++ spin_unlock_irqrestore(&drv_data->lock, flags); ++ return; ++ } ++ ++ /* Extract head of queue */ ++ drv_data->cur_msg = list_entry(drv_data->queue.next, ++ struct spi_message, queue); ++ list_del_init(&drv_data->cur_msg->queue); ++ ++ /* Initial message state*/ ++ drv_data->cur_msg->state = START_STATE; ++ drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next, ++ struct spi_transfer, ++ transfer_list); ++ ++ if (drv_data->cur_transfer->transfer_list.next ++ == &drv_data->cur_msg->transfers) ++ drv_data->cur_transfer->cs_change = 1; /* last */ ++ ++ ++ /* Setup the SPI Registers using the per chip configuration */ ++ drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi); ++ ++ /* Mark as busy and launch transfers */ ++ tasklet_schedule(&drv_data->pump_transfers); ++ ++ drv_data->busy = 1; ++ spin_unlock_irqrestore(&drv_data->lock, flags); ++} ++ ++/****************************************************************************/ ++ ++/* ++ * SPI master implementation ++ */ ++ ++static int transfer(struct spi_device *spi, struct spi_message *msg) ++{ ++ struct driver_data *drv_data = spi_master_get_devdata(spi->master); ++ unsigned long flags; ++ ++ DBG("\n"); ++ spin_lock_irqsave(&drv_data->lock, flags); ++ ++ if (drv_data->run == QUEUE_STOPPED) { ++ spin_unlock_irqrestore(&drv_data->lock, flags); ++ return -ESHUTDOWN; ++ } ++ ++ msg->actual_length = 0; ++ msg->status = -EINPROGRESS; ++ msg->state = START_STATE; ++ ++ list_add_tail(&msg->queue, &drv_data->queue); ++ ++ if (drv_data->run == QUEUE_RUNNING && !drv_data->busy) ++ queue_work(drv_data->workqueue, &drv_data->pump_messages); ++ ++ spin_unlock_irqrestore(&drv_data->lock, flags); ++ ++ return 0; ++} ++ ++ ++static int setup(struct spi_device *spi) ++{ ++ ++ struct chip_data *chip; ++ struct coldfire_dspi_chip *chip_info ++ = (struct coldfire_dspi_chip *)spi->controller_data; ++ DBG("\n"); ++ ++ /* Only alloc on first setup */ ++ chip = spi_get_ctldata(spi); ++ if (chip == NULL) { ++ chip = kcalloc(1, sizeof(struct chip_data), GFP_KERNEL); ++ if (!chip) ++ return -ENOMEM; ++ spi->mode = chip_info->mode; ++ spi->bits_per_word = chip_info->bits_per_word; ++ } ++ ++ chip->mcr.master = 1; ++ chip->mcr.cont_scke = 0; ++ chip->mcr.dconf = 0; ++ chip->mcr.frz = 0; ++ chip->mcr.mtfe = 0; ++ chip->mcr.pcsse = 0; ++ chip->mcr.rooe = 0; ++ chip->mcr.pcsis = 0xFF; ++ chip->mcr.reserved15 = 0; ++ chip->mcr.mdis = 0; ++ chip->mcr.dis_tx = 0; ++ chip->mcr.dis_rxf = 0; ++ chip->mcr.clr_tx = 1; ++ chip->mcr.clr_rxf = 1; ++ chip->mcr.smpl_pt = 0; ++ chip->mcr.reserved71 = 0; ++ chip->mcr.halt = 0; ++ ++ if ((spi->bits_per_word >= 4) && (spi->bits_per_word <= 16)) { ++ chip->ctar.fmsz = spi->bits_per_word-1; ++ } else { ++ printk(KERN_ERR "Invalid wordsize\n"); ++ kfree(chip); ++ return -ENODEV; ++ } ++ ++ chip->void_write_data = chip_info->void_write_data; ++ ++ if (spi->max_speed_hz != 0) ++ chip_info->br = hz_to_spi_baud(chip_info->pbr, chip_info->dbr, \ ++ spi->max_speed_hz); ++ ++ chip->ctar.cpha = (spi->mode & SPI_CPHA) ? 1 : 0; ++ chip->ctar.cpol = (spi->mode & SPI_CPOL) ? 1 : 0; ++ chip->ctar.lsbfe = (spi->mode & SPI_LSB_FIRST) ? 1 : 0; ++ chip->ctar.dbr = chip_info->dbr; ++ chip->ctar.pbr = chip_info->pbr; ++ chip->ctar.br = chip_info->br; ++ chip->ctar.pcssck = chip_info->pcssck; ++ chip->ctar.pasc = chip_info->pasc; ++ chip->ctar.pdt = chip_info->pdt; ++ chip->ctar.cssck = chip_info->cssck; ++ chip->ctar.asc = chip_info->asc; ++ chip->ctar.dt = chip_info->dt; ++ ++ spi_set_ctldata(spi, chip); ++ ++ return 0; ++} ++ ++static int init_queue(struct driver_data *drv_data) ++{ ++ INIT_LIST_HEAD(&drv_data->queue); ++ spin_lock_init(&drv_data->lock); ++ ++ drv_data->run = QUEUE_STOPPED; ++ drv_data->busy = 0; ++ ++ tasklet_init(&drv_data->pump_transfers, ++ pump_transfers, (unsigned long)drv_data); ++ ++ INIT_WORK(&drv_data->pump_messages, pump_messages); ++ ++ drv_data->workqueue = create_singlethread_workqueue( ++ drv_data->master->dev.parent->bus_id); ++ if (drv_data->workqueue == NULL) ++ return -EBUSY; ++ ++ return 0; ++} ++ ++static int start_queue(struct driver_data *drv_data) ++{ ++ unsigned long flags; ++ ++ spin_lock_irqsave(&drv_data->lock, flags); ++ ++ if (drv_data->run == QUEUE_RUNNING || drv_data->busy) { ++ spin_unlock_irqrestore(&drv_data->lock, flags); ++ return -EBUSY; ++ } ++ ++ drv_data->run = QUEUE_RUNNING; ++ drv_data->cur_msg = NULL; ++ drv_data->cur_transfer = NULL; ++ drv_data->cur_chip = NULL; ++ spin_unlock_irqrestore(&drv_data->lock, flags); ++ ++ queue_work(drv_data->workqueue, &drv_data->pump_messages); ++ ++ return 0; ++} ++ ++static int stop_queue(struct driver_data *drv_data) ++{ ++ unsigned long flags; ++ unsigned limit = 500; ++ int status = 0; ++ ++ spin_lock_irqsave(&drv_data->lock, flags); ++ ++ /* This is a bit lame, but is optimized for the common execution path. ++ * A wait_queue on the drv_data->busy could be used, but then the common ++ * execution path (pump_messages) would be required to call wake_up or ++ * friends on every SPI message. Do this instead */ ++ drv_data->run = QUEUE_STOPPED; ++ while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) { ++ spin_unlock_irqrestore(&drv_data->lock, flags); ++ msleep(10); ++ spin_lock_irqsave(&drv_data->lock, flags); ++ } ++ ++ if (!list_empty(&drv_data->queue) || drv_data->busy) ++ status = -EBUSY; ++ ++ spin_unlock_irqrestore(&drv_data->lock, flags); ++ ++ return status; ++} ++ ++static int destroy_queue(struct driver_data *drv_data) ++{ ++ int status; ++ ++ status = stop_queue(drv_data); ++ if (status != 0) ++ return status; ++ ++ destroy_workqueue(drv_data->workqueue); ++ ++ return 0; ++} ++ ++ ++static void cleanup(struct spi_device *spi) ++{ ++ struct chip_data *chip = spi_get_ctldata((struct spi_device *)spi); ++ ++ dev_dbg(&spi->dev, "spi_device %u.%u cleanup\n", ++ spi->master->bus_num, spi->chip_select); ++ ++ kfree(chip); ++} ++ ++ ++/****************************************************************************/ ++ ++/* ++ * Generic Device driver routines and interface implementation ++ */ ++ ++static int coldfire_spi_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct coldfire_spi_master *platform_info; ++ struct spi_master *master; ++ struct driver_data *drv_data = 0; ++ struct resource *memory_resource; ++ int irq; ++ int status = 0; ++ int i; ++#if defined(SPI_DSPI_EDMA) ++ dma_addr_t dma_handle; ++#endif ++ ++ platform_info = (struct coldfire_spi_master *)dev->platform_data; ++ ++ master = spi_alloc_master(dev, sizeof(struct driver_data)); ++ if (!master) ++ return -ENOMEM; ++ ++ drv_data = spi_master_get_devdata(master); ++ drv_data->master = master; ++ ++ INIT_LIST_HEAD(&drv_data->queue); ++ spin_lock_init(&drv_data->lock); ++ ++ master->bus_num = platform_info->bus_num; ++ master->num_chipselect = platform_info->num_chipselect; ++ master->cleanup = cleanup; ++ master->setup = setup; ++ master->transfer = transfer; ++ ++ drv_data->cs_control = platform_info->cs_control; ++ if (drv_data->cs_control) ++ for (i = 0; i < master->num_chipselect; i++) ++ drv_data->cs_control(i, QSPI_CS_INIT | QSPI_CS_DROP); ++ ++ /* Setup register addresses */ ++ memory_resource = platform_get_resource_byname(pdev, ++ IORESOURCE_MEM, "spi-module"); ++ if (!memory_resource) { ++ dev_dbg(dev, "can not find platform module memory\n"); ++ goto out_error_master_alloc; ++ } ++ ++#if defined(SPI_DSPI_EDMA) ++ drv_data->edma_tx_buf = dma_alloc_coherent(NULL, EDMA_BUFSIZE_KMALLOC, \ ++ &dma_handle, GFP_DMA); ++ if (!drv_data->edma_tx_buf) { ++ dev_dbg(dev, "cannot allocate eDMA TX memory\n"); ++ goto out_error_master_alloc; ++ } ++ drv_data->edma_rx_buf = dma_alloc_coherent(NULL, EDMA_BUFSIZE_KMALLOC, \ ++ &dma_handle, GFP_DMA); ++ if (!drv_data->edma_rx_buf) { ++ dma_free_coherent(NULL, EDMA_BUFSIZE_KMALLOC, \ ++ drv_data->edma_tx_buf, dma_handle); ++ kfree(drv_data->edma_tx_buf); ++ dev_dbg(dev, "cannot allocate eDMA RX memory\n"); ++ goto out_error_master_alloc; ++ } ++#endif ++ ++ drv_data->mcr = (void *)&MCF_DSPI_DMCR; ++ drv_data->ctar = (void *)&MCF_DSPI_DCTAR0; ++ drv_data->dspi_sr = (void *)&MCF_DSPI_DSR; ++ drv_data->dspi_rser = (void *)&MCF_DSPI_DRSER; ++ drv_data->dspi_dtfr = (void *)&MCF_DSPI_DTFR; ++ drv_data->dspi_drfr = (void *)&MCF_DSPI_DRFR; ++ ++ memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM, ++ "spi-par"); ++ if (!memory_resource) { ++ dev_dbg(dev, "No spi-par memory\n"); ++ goto out_error_master_alloc; ++ } ++ drv_data->par = (void *)memory_resource->start; ++ ++ memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM, ++ "spi-int-level"); ++ if (!memory_resource) { ++ dev_dbg(dev, "No spi-int-level memory\n"); ++ goto out_error_master_alloc; ++ } ++ drv_data->int_icr = (void *)memory_resource->start; ++ ++ memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM, ++ "spi-int-mask"); ++ if (!memory_resource) { ++ dev_dbg(dev, "No spi-int-mask memory\n"); ++ goto out_error_master_alloc; ++ } ++ drv_data->int_mr = (void *)memory_resource->start; ++ ++ if (platform_info->irq_list) { ++ /* multiple IRQs */ ++ int *irqlist = platform_info->irq_list; ++ while ((irq = *irqlist++)) { ++ int off = *irqlist++; ++ int lvl = *irqlist++; ++ int msk = *irqlist++; ++ status = request_irq(irq, dspi_interrupt, IRQF_DISABLED, ++ dev->bus_id, drv_data); ++ if (status < 0) { ++ dev_err(&pdev->dev, ++ "Unable to attach ColdFire DSPI interrupt\n"); ++ goto out_error_master_alloc; ++ } ++ ++ if (lvl) ++ *(drv_data->int_icr + off) = lvl; ++ ++ if (msk) ++ *drv_data->int_mr &= ~msk; ++ } ++ } ++ else { ++ irq = platform_info->irq_vector; ++ ++ status = request_irq(platform_info->irq_vector, dspi_interrupt, ++ IRQF_DISABLED, dev->bus_id, drv_data); ++ if (status < 0) { ++ dev_err(&pdev->dev, "Unable to attach ColdFire DSPI interrupt\n"); ++ goto out_error_master_alloc; ++ } ++ ++ *drv_data->int_icr = platform_info->irq_lp; ++ *drv_data->int_mr &= ~platform_info->irq_mask; ++ } ++ ++ /* Now that we have all the addresses etc. Let's set it up */ ++ if (platform_info->par_val) ++ *drv_data->par = platform_info->par_val; ++ ++ /* Initial and start queue */ ++ status = init_queue(drv_data); ++ if (status != 0) { ++ dev_err(&pdev->dev, "Problem initializing DSPI queue\n"); ++ goto out_error_irq_alloc; ++ } ++ status = start_queue(drv_data); ++ if (status != 0) { ++ dev_err(&pdev->dev, "Problem starting DSPI queue\n"); ++ goto out_error_irq_alloc; ++ } ++ ++ /* Register with the SPI framework */ ++ platform_set_drvdata(pdev, drv_data); ++ status = spi_register_master(master); ++ if (status != 0) { ++ dev_err(&pdev->dev, "Problem registering DSPI master\n"); ++ status = -EINVAL; ++ goto out_error_queue_alloc; ++ } ++ ++#if defined(SPI_DSPI_EDMA) ++ if (mcf_edma_request_channel(DSPI_DMA_TX_TCD, ++ edma_tx_handler, ++ NULL, ++ 0x0, ++ pdev, ++ NULL, /* spinlock */ ++ DRIVER_NAME) < 0){ ++ dev_err(&pdev->dev, "eDMA transmit channel request\n"); ++ status = -EINVAL; ++ goto out_error_queue_alloc; ++ } ++ ++ if (mcf_edma_request_channel(DSPI_DMA_RX_TCD, ++ edma_rx_handler, ++ NULL, ++ 0x0, ++ pdev, ++ NULL, /* spinlock */ ++ DRIVER_NAME) < 0){ ++ dev_err(&pdev->dev, "eDAM receive channel request\n"); ++ status = -EINVAL; ++ mcf_edma_free_channel(DSPI_DMA_TX_TCD, pdev); ++ goto out_error_queue_alloc; ++ } ++#endif ++ ++ printk(KERN_INFO "DSPI: Coldfire master initialized\n"); ++ return status; ++ ++out_error_queue_alloc: ++ destroy_queue(drv_data); ++ ++out_error_irq_alloc: ++ free_irq(platform_info->irq_vector, drv_data); ++ ++out_error_master_alloc: ++ spi_master_put(master); ++ return status; ++ ++} ++ ++static int coldfire_spi_remove(struct platform_device *pdev) ++{ ++ struct driver_data *drv_data = platform_get_drvdata(pdev); ++ int irq; ++ int status = 0; ++ ++ if (!drv_data) ++ return 0; ++ ++#if defined(SPI_DSPI_EDMA) ++ mcf_edma_free_channel(DSPI_DMA_TX_TCD, pdev); ++ mcf_edma_free_channel(DSPI_DMA_RX_TCD, pdev); ++#endif ++ ++ /* Remove the queue */ ++ status = destroy_queue(drv_data); ++ if (status != 0) ++ return status; ++ ++ /* Release IRQ */ ++ irq = platform_get_irq(pdev, 0); ++ if (irq >= 0) ++ free_irq(irq, drv_data); ++ ++ /* Disconnect from the SPI framework */ ++ spi_unregister_master(drv_data->master); ++ ++ /* Prevent double remove */ ++ platform_set_drvdata(pdev, NULL); ++ ++ return 0; ++} ++ ++static void coldfire_spi_shutdown(struct platform_device *pdev) ++{ ++ int status = coldfire_spi_remove(pdev); ++ ++ if (status != 0) ++ dev_err(&pdev->dev, "shutdown failed with %d\n", status); ++} ++ ++ ++#ifdef CONFIG_PM ++static int suspend_devices(struct device *dev, void *pm_message) ++{ ++ pm_message_t *state = pm_message; ++ ++ if (dev->power.power_state.event != state->event) { ++ dev_warn(dev, "pm state does not match request\n"); ++ return -1; ++ } ++ ++ return 0; ++} ++ ++static int coldfire_spi_suspend(struct platform_device *pdev, ++ pm_message_t state) ++{ ++ struct driver_data *drv_data = platform_get_drvdata(pdev); ++ int status = 0; ++ ++ /* Check all childern for current power state */ ++ if (device_for_each_child(&pdev->dev, ++ &state, suspend_devices) != 0) { ++ dev_warn(&pdev->dev, "suspend aborted\n"); ++ return -1; ++ } ++ ++ status = stop_queue(drv_data); ++ if (status != 0) ++ return status; ++ ++ return 0; ++} ++ ++static int coldfire_spi_resume(struct platform_device *pdev) ++{ ++ struct driver_data *drv_data = platform_get_drvdata(pdev); ++ int status = 0; ++ ++ /* Start the queue running */ ++ status = start_queue(drv_data); ++ if (status != 0) { ++ dev_err(&pdev->dev, "problem starting queue (%d)\n", status); ++ return status; ++ } ++ ++ return 0; ++} ++#else ++#define coldfire_spi_suspend NULL ++#define coldfire_spi_resume NULL ++#endif /* CONFIG_PM */ ++ ++static struct platform_driver driver = { ++ .driver = { ++ .name = "spi_coldfire", ++ .bus = &platform_bus_type, ++ .owner = THIS_MODULE, ++ }, ++ .probe = coldfire_spi_probe, ++ .remove = __devexit_p(coldfire_spi_remove), ++ .shutdown = coldfire_spi_shutdown, ++ .suspend = coldfire_spi_suspend, ++ .resume = coldfire_spi_resume, ++}; ++ ++static int __init coldfire_spi_init(void) ++{ ++ platform_driver_register(&driver); ++ ++ return 0; ++} ++module_init(coldfire_spi_init); ++ ++static void __exit coldfire_spi_exit(void) ++{ ++ platform_driver_unregister(&driver); ++} ++module_exit(coldfire_spi_exit); ++ ++MODULE_AUTHOR("Matt Waddel"); ++MODULE_DESCRIPTION("ColdFire DSPI Contoller"); ++MODULE_LICENSE("GPL"); +--- a/drivers/spi/Kconfig ++++ b/drivers/spi/Kconfig +@@ -35,6 +35,15 @@ config SPI_DEBUG + Say "yes" to enable debug messaging (like dev_dbg and pr_debug), + sysfs, and debugfs support in SPI controller and protocol drivers. + ++config COLDFIRE_EDMA ++ tristate "Coldfire eDMA" ++ depends on COLDFIRE && EXPERIMENTAL ++ help ++ Support for Coldfire eDMA controller. Required for example ++ by SSI audio device driver. ++ ++ ++ + # + # MASTER side ... talking to discrete SPI slave chips including microcontrollers + # +@@ -113,6 +122,27 @@ config SPI_GPIO + + If unsure, say N. + ++config SPI_COLDFIRE ++ tristate "Coldfire QSPI/DSPI SPI Master" ++ depends on SPI_MASTER && COLDFIRE && EXPERIMENTAL ++ help ++ SPI driver for Freescale Coldfire QSPI module in master mode. ++ Tested with the 5282 processor, but should also work with other ++ Coldfire variants. ++ ++config SPI_DSPI ++ tristate "Coldfire DSPI" ++ depends on SPI_MASTER && COLDFIRE ++ help ++ SPI driver for Coldfire DSPI driver only. ++ ++config SPI_COLDFIRE_DSPI_EDMA ++ boolean "Coldfire DSPI master driver uses eDMA" ++ depends on SPI_MASTER && COLDFIRE && SPI_COLDFIRE && EXPERIMENTAL && COLDFIRE_EDMA ++ default n ++ help ++ Say "yes" if you want DSPI master driver to use eDMA for transfers. ++ + config SPI_IMX + tristate "Freescale iMX SPI controller" + depends on SPI_MASTER && ARCH_IMX && EXPERIMENTAL +@@ -255,6 +285,18 @@ config SPI_TLE62X0 + # + # Add new SPI protocol masters in alphabetical order above this line + # ++config SPI_COLDFIRE_SSI_AUDIO ++ tristate "Coldfire SSI AUDIO" ++ depends on SPI_MASTER && SPI_COLDFIRE && EXPERIMENTAL ++ help ++ SSI audio device driver ++ ++config SSIAUDIO_USE_EDMA ++ boolean "Coldfire DSPI master driver uses eDMA" ++ default y ++ depends on EXPERIMENTAL && COLDFIRE_EDMA && SPI_COLDFIRE_SSI_AUDIO ++ help ++ Say "yes" if you want SSI audio driver to use eDMA for SSI transfers. + + # (slave support would go here) + +--- a/drivers/spi/Makefile ++++ b/drivers/spi/Makefile +@@ -6,6 +6,8 @@ ifeq ($(CONFIG_SPI_DEBUG),y) + EXTRA_CFLAGS += -DDEBUG + endif + ++obj-$(CONFIG_COLDFIRE_EDMA) += coldfire_edma.o ++ + # small core, mostly translating board-specific + # config declarations into driver model code + obj-$(CONFIG_SPI_MASTER) += spi.o +@@ -16,6 +18,8 @@ obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx. + obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o + obj-$(CONFIG_SPI_AU1550) += au1550_spi.o + obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o ++# obj-$(CONFIG_SPI_COLDFIRE) += spi_coldfire.o spi-m5445x.o ++obj-$(CONFIG_SPI_DSPI) += dspi_mcf.o + obj-$(CONFIG_SPI_GPIO) += spi_gpio.o + obj-$(CONFIG_SPI_IMX) += spi_imx.o + obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o +@@ -35,6 +39,7 @@ obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci. + obj-$(CONFIG_SPI_AT25) += at25.o + obj-$(CONFIG_SPI_SPIDEV) += spidev.o + obj-$(CONFIG_SPI_TLE62X0) += tle62x0.o ++obj-$(CONFIG_SPI_COLDFIRE_SSI_AUDIO) += ssi_audio.o + # ... add above this line ... + + # SPI slave controller drivers (upstream link) +--- /dev/null ++++ b/drivers/spi/spi_coldfire.c +@@ -0,0 +1,1542 @@ ++/* ++ * spi_coldfire.c - Master QSPI/DSPI controller for the ColdFire processors ++ * ++ * ++ * (C) Copyright 2005, Intec Automation, ++ * Mike Lavender (mike@steroidmicros) ++ * ++ * (C) Copyright 2007-2008, Freescale Inc, ++ * Yaroslav Vinogradov ++ * Andrey Butok ++ * Kurt Mahan ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ * ++ *************************************************************************** ++ * Changes: ++ * v0.003 12 February 2008 Andrey Butok, Freescale Semiconductor ++ * Added suport of MCF5227x DSPI module. ++ * v0.002 2007 Yaroslav Vinogradov, Freescale Semiconductor ++ * Added suport of MCF5445x DSPI module. ++ * v0.001 2005 Mike Lavender, Intec Automation, ++ * Intial version. Coldfire QSPI master driver. ++ * ++ */ ++ ++ ++/****************************************************************************/ ++ ++/* ++ * Includes ++ */ ++ ++#include <linux/autoconf.h> ++#include <linux/init.h> ++#include <linux/module.h> ++#include <linux/device.h> ++#include <linux/interrupt.h> ++#include <linux/platform_device.h> ++#include <linux/spi/spi.h> ++#include <linux/workqueue.h> ++#include <linux/delay.h> ++ ++#include <asm/delay.h> ++#include <asm/mcfsim.h> ++#include <asm/mcfqspi.h> ++#include <asm/coldfire.h> ++ ++#if defined(CONFIG_M5445X) ++ #include <asm/virtconvert.h> ++ ++ #define SPI_DSPI ++ #if defined(CONFIG_SPI_COLDFIRE_DSPI_EDMA) ++ #define SPI_DSPI_EDMA ++ #ifdef CONFIG_MMU ++ #define SPI_USE_MMU ++ #endif ++ #include <asm/mcf5445x_edma.h> ++ #endif ++ ++ #include <asm/mcf5445x_dspi.h> ++#endif ++ ++#if defined(CONFIG_M547X_8X) ++ #define SPI_DSPI ++ ++ #include <asm/virtconvert.h> ++ #include <asm/m5485dspi.h> ++#endif ++ ++#ifdef CONFIG_M5227x ++ #define SPI_DSPI ++ ++ #if defined(CONFIG_SPI_COLDFIRE_DSPI_EDMA) ++ #define SPI_DSPI_EDMA ++ #endif ++#endif ++ ++ ++#if defined(SPI_DSPI_EDMA) ++ ++/* edma buffer size in transfer units (32bits) */ ++#define EDMA_BUFFER_SIZE (PAGE_SIZE/4) ++#define EDMA_BUFSIZE_KMALLOC (EDMA_BUFFER_SIZE*4) ++ ++#define DSPI_DMA_RX_TCD MCF_EDMA_CHAN_DSPI_RX ++#define DSPI_DMA_TX_TCD MCF_EDMA_CHAN_DSPI_TX ++ ++#include <asm/mcf_edma.h> ++#endif ++ ++MODULE_AUTHOR("Mike Lavender"); ++MODULE_DESCRIPTION("ColdFire SPI Contoller"); ++MODULE_LICENSE("GPL"); ++ ++#define DRIVER_NAME "Coldfire QSPI/DSPI" ++ ++/****************************************************************************/ ++ ++/* ++ * Local constants and macros ++ */ ++ ++#define QSPI_RAM_SIZE 0x10 /* 16 word table */ ++#define QSPI_TRANSMIT_RAM 0x00 ++#define QSPI_RECEIVE_RAM 0x10 ++#define QSPI_COMMAND_RAM 0x20 ++ ++#define QSPI_COMMAND 0x7000 /* 15: X = Continuous CS ++ * 14: 1 = Get BITSE from QMR[BITS] ++ * 13: 1 = Get DT from QDLYR[DTL] ++ * 12: 1 = Get DSK from QDLYR[QCD] ++ * 8-11: XXXX = next 4 bytes for CS ++ * 0-7: 0000 0000 Reserved ++ */ ++ ++#define QIR_WCEF 0x0008 /* write collison */ ++#define QIR_ABRT 0x0004 /* abort */ ++#define QIR_SPIF 0x0001 /* finished */ ++ ++#define QIR_WCEFE 0x0800 ++#define QIR_ABRTE 0x0400 ++#define QIR_SPIFE 0x0100 ++ ++#define QIR_WCEFB 0x8000 ++#define QIR_ABRTB 0x4000 ++#define QIR_ABRTL 0x1000 ++ ++#define QMR_BITS 0x3C00 ++#define QMR_BITS_8 0x2000 ++ ++#define QCR_CONT 0x8000 ++ ++#define QDLYR_SPE 0x8000 ++ ++#define QWR_ENDQP_MASK 0x0F00 ++#define QWR_CSIV 0x1000 /* 1 = active low chip selects */ ++ ++ ++#define START_STATE ((void*)0) ++#define RUNNING_STATE ((void*)1) ++#define DONE_STATE ((void*)2) ++#define ERROR_STATE ((void*)-1) ++ ++#define QUEUE_RUNNING 0 ++#define QUEUE_STOPPED 1 ++ ++/****************************************************************************/ ++ ++/* ++ * Local Data Structures ++ */ ++ ++struct transfer_state { ++ u32 index; ++ u32 len; ++ void *tx; ++ void *tx_end; ++ void *rx; ++ void *rx_end; ++ char flags; ++#define TRAN_STATE_RX_VOID 0x01 ++#define TRAN_STATE_TX_VOID 0x02 ++#define TRAN_STATE_WORD_ODD_NUM 0x04 ++ u8 cs; ++ u16 void_write_data; ++ unsigned cs_change:1; ++}; ++ ++typedef struct { ++ unsigned master:1; ++ unsigned dohie:1; ++ unsigned bits:4; ++ unsigned cpol:1; ++ unsigned cpha:1; ++ unsigned baud:8; ++} QMR; ++ ++typedef struct { ++ unsigned spe:1; ++ unsigned qcd:7; ++ unsigned dtl:8; ++} QDLYR; ++ ++typedef struct { ++ unsigned halt:1; ++ unsigned wren:1; ++ unsigned wrto:1; ++ unsigned csiv:1; ++ unsigned endqp:4; ++ unsigned cptqp:4; ++ unsigned newqp:4; ++} QWR; ++ ++ ++typedef struct { ++ unsigned master:1; ++ unsigned cont_scke:1; ++ unsigned dconf:2; ++ unsigned frz:1; ++ unsigned mtfe:1; ++ unsigned pcsse:1; ++ unsigned rooe:1; ++ unsigned pcsis:8; ++ unsigned reserved15:1; ++ unsigned mdis:1; ++ unsigned dis_tx:1; ++ unsigned dis_rxf:1; ++ unsigned clr_tx:1; ++ unsigned clr_rxf:1; ++ unsigned smpl_pt:2; ++ unsigned reserved71:7; ++ unsigned halt:1; ++} DSPI_MCR; ++ ++typedef struct { ++ unsigned dbr:1; ++ unsigned fmsz:4; ++ unsigned cpol:1; ++ unsigned cpha:1; ++ unsigned lsbfe:1; ++ unsigned pcssck:2; ++ unsigned pasc:2; ++ unsigned pdt:2; ++ unsigned pbr:2; ++ unsigned cssck:4; ++ unsigned asc:4; ++ unsigned dt:4; ++ unsigned br:4; ++} DSPI_CTAR; ++ ++struct chip_data { ++#if defined(SPI_DSPI) ++ /* dspi data */ ++ union { ++ u32 mcr_val; ++ DSPI_MCR mcr; ++ }; ++ union { ++ u32 ctar_val; ++ DSPI_CTAR ctar; ++ }; ++#else ++ union { ++ u16 qmr_val; ++ QMR qmr; ++ }; ++ union { ++ u16 qdlyr_val; ++ QDLYR qdlyr; ++ }; ++ union { ++ u16 qwr_val; ++ QWR qwr; ++ }; ++#endif ++ ++ u16 void_write_data; ++}; ++ ++ ++struct driver_data { ++ /* Driver model hookup */ ++ struct platform_device *pdev; ++ ++ /* SPI framework hookup */ ++ struct spi_master *master; ++ ++ /* Driver message queue */ ++ struct workqueue_struct *workqueue; ++ struct work_struct pump_messages; ++ spinlock_t lock; ++ struct list_head queue; ++ int busy; ++ int run; ++ ++ /* Message Transfer pump */ ++ struct tasklet_struct pump_transfers; ++ ++ /* Current message transfer state info */ ++ struct spi_message* cur_msg; ++ struct spi_transfer* cur_transfer; ++ struct chip_data *cur_chip; ++ size_t len; ++ void *tx; ++ void *tx_end; ++ void *rx; ++ void *rx_end; ++ char flags; ++#define TRAN_STATE_RX_VOID 0x01 ++#define TRAN_STATE_TX_VOID 0x02 ++#define TRAN_STATE_WORD_ODD_NUM 0x04 ++ u8 cs; ++ u16 void_write_data; ++ unsigned cs_change:1; ++ ++ u32 trans_cnt; ++ u32 wce_cnt; ++ u32 abrt_cnt; ++#if defined(SPI_DSPI) ++ u32 *mcr; /* DSPI MCR register */ ++ u32 *ctar; /* DSPI CTAR register */ ++ u32 *dspi_dtfr; /* DSPI DTFR register */ ++ u32 *dspi_drfr; /* DSPI DRFR register */ ++ u32 *dspi_rser; /* DSPI RSER register */ ++ u32 *dspi_sr; /* DSPI status register */ ++ u8 dspi_ctas; /* DSPI CTAS value*/ ++#if defined(SPI_DSPI_EDMA) ++ void* edma_tx_buf; ++ void* edma_rx_buf; ++#endif ++#else ++ u16 *qmr; /* QSPI mode register */ ++ u16 *qdlyr; /* QSPI delay register */ ++ u16 *qwr; /* QSPI wrap register */ ++ u16 *qir; /* QSPI interrupt register */ ++ u16 *qar; /* QSPI address register */ ++ u16 *qdr; /* QSPI data register */ ++ u16 *qcr; /* QSPI command register */ ++#endif ++#if defined(CONFIG_M532x) || defined(CONFIG_M537x) ++ u16 *par; /* Pin assignment register */ ++#else ++ u8 *par; /* Pin assignment register */ ++#endif ++ u8 *int_icr; /* Interrupt level and priority register */ ++ u32 *int_mr; /* Interrupt mask register */ ++ void (*cs_control)(u8 cs, u8 command); ++}; ++ ++#define DSPI_CS(cs) ((1<<(cs))<<16) ++ ++ ++/****************************************************************************/ ++ ++/* ++ * SPI local functions ++ */ ++ ++static void *next_transfer(struct driver_data *drv_data) ++{ ++ struct spi_message *msg = drv_data->cur_msg; ++ struct spi_transfer *trans = drv_data->cur_transfer; ++ ++ /* Move to next transfer */ ++ if (trans->transfer_list.next != &msg->transfers) { ++ drv_data->cur_transfer = ++ list_entry(trans->transfer_list.next, ++ struct spi_transfer, ++ transfer_list); ++ return RUNNING_STATE; ++ } else ++ return DONE_STATE; ++} ++ ++ ++#define DSPI_BITS MCF_DSPI_DCTAR_FMSZ(15) ++#define DSPI_BITS_16 MCF_DSPI_DCTAR_FMSZ(15) ++#define DSPI_BITS_8 MCF_DSPI_DCTAR_FMSZ(7) ++#define DSPI_FIFO_SIZE 16 ++ ++static inline int is_word_transfer(struct driver_data *drv_data) ++{ ++#if defined(SPI_DSPI) ++ return ((*drv_data->ctar & DSPI_BITS_16) == DSPI_BITS_8) ? 0 : 1; ++#else ++ return ((*drv_data->qmr & QMR_BITS) == QMR_BITS_8) ? 0 : 1; ++#endif ++} ++ ++static void inline set_8bit_transfer_mode(struct driver_data *drv_data) ++{ ++#if defined(SPI_DSPI) ++ *drv_data->ctar |= (*drv_data->ctar & ~DSPI_BITS) | DSPI_BITS_8; ++#else ++ *drv_data->qmr |= (*drv_data->qmr & ~QMR_BITS) | QMR_BITS_8; ++#endif ++} ++ ++static void inline set_16bit_transfer_mode(struct driver_data *drv_data) ++{ ++#if defined(SPI_DSPI) ++ *drv_data->ctar |= (*drv_data->ctar & ~DSPI_BITS) | DSPI_BITS_16; ++#else ++ *drv_data->qmr |= (*drv_data->qmr & ~QMR_BITS); ++#endif ++} ++ ++static int write(struct driver_data *drv_data) ++{ ++ int tx_count = 0; ++#ifndef SPI_DSPI ++ int cmd_count = 0; ++#endif ++ int tx_word; ++ ++#if defined(SPI_DSPI) ++#if defined(SPI_DSPI_EDMA) ++ u32* edma_wr; ++#endif ++ u16 d16; ++ u8 d8; ++ u32 dspi_pushr; ++ int first = 1; ++#endif ++ ++ tx_word = is_word_transfer(drv_data); ++ ++ /* If we are in word mode, but only have a single byte to transfer ++ * then switch to byte mode temporarily. Will switch back at the ++ * end of the transfer. */ ++ if (tx_word && ((drv_data->tx_end - drv_data->tx) == 1)) { ++ drv_data->flags |= TRAN_STATE_WORD_ODD_NUM; ++ set_8bit_transfer_mode(drv_data); ++ tx_word = 0; ++ } ++ ++ ++#if defined(SPI_DSPI) ++#if defined(SPI_DSPI_EDMA) ++ edma_wr = (u32*)(drv_data->edma_tx_buf); ++#endif ++ ++#if defined(SPI_DSPI_EDMA) ++ while ((drv_data->tx < drv_data->tx_end) && (tx_count < EDMA_BUFFER_SIZE)) { ++#else ++ while ((drv_data->tx < drv_data->tx_end) && (tx_count < DSPI_FIFO_SIZE)) { ++#endif ++ if (tx_word) { ++ if ((drv_data->tx_end - drv_data->tx) == 1) ++ break; ++ if (!(drv_data->flags & TRAN_STATE_TX_VOID)) { ++ d16 = *(u16 *)drv_data->tx; ++ } else { ++ d16 = drv_data->void_write_data; ++ } ++ ++ dspi_pushr = MCF_DSPI_DTFR_TXDATA(d16) ++ | DSPI_CS(drv_data->cs) ++ | MCF_DSPI_DTFR_CTAS(drv_data->dspi_ctas); ++ drv_data->tx += 2; ++ ++#if defined(SPI_DSPI_EDMA) ++ if (drv_data->tx == drv_data->tx_end || tx_count==EDMA_BUFFER_SIZE-1) { ++#else ++ if (drv_data->tx == drv_data->tx_end || tx_count==DSPI_FIFO_SIZE-1) { ++#endif ++ /* last transfer in the queue */ ++ dspi_pushr |= MCF_DSPI_DTFR_EOQ; ++ if (drv_data->cs_change) { ++ dspi_pushr &= ~MCF_DSPI_DTFR_CONT; ++ } ++ } ++ ++ if (first) { ++ first = 0; ++ dspi_pushr |= MCF_DSPI_DTFR_CTCNT; /* clear counter */ ++ } ++#if defined(SPI_DSPI_EDMA) ++ *edma_wr = dspi_pushr; ++ edma_wr++; ++#else ++ *drv_data->dspi_dtfr = dspi_pushr; ++#endif ++ ++ ++ } else { ++ if (!(drv_data->flags & TRAN_STATE_TX_VOID)) { ++ d8 = *(u8 *)drv_data->tx; ++ } else { ++ d8 = *(u8 *)&drv_data->void_write_data; ++ } ++ ++ dspi_pushr = MCF_DSPI_DTFR_TXDATA(d8) ++ | DSPI_CS(drv_data->cs) ++ | MCF_DSPI_DTFR_CTAS(drv_data->dspi_ctas) ++ | MCF_DSPI_DTFR_CONT; ++ ++ drv_data->tx++; ++ ++ if (drv_data->tx == drv_data->tx_end || tx_count==DSPI_FIFO_SIZE-1) { ++ /* last transfer in the queue */ ++ dspi_pushr |= MCF_DSPI_DTFR_EOQ; ++ if (drv_data->cs_change) { ++ dspi_pushr &= ~MCF_DSPI_DTFR_CONT; ++ } ++ } ++ ++ if (first) { ++ first = 0; ++ dspi_pushr |= MCF_DSPI_DTFR_CTCNT; /* clear counter */ ++ } ++ ++#if defined(SPI_DSPI_EDMA) ++ *edma_wr = dspi_pushr; ++ edma_wr++; ++#else ++ *drv_data->dspi_dtfr = dspi_pushr; ++#endif ++ ++ } ++ tx_count++; ++ } ++ ++#if defined(SPI_DSPI_EDMA) ++ ++ if (tx_count>0) { ++ ++ /* TBD: initiate eDMA transfer */ ++ mcf_edma_set_tcd_params(DSPI_DMA_TX_TCD, ++#ifdef SPI_USE_MMU ++ virt_to_phys(drv_data->edma_tx_buf), ++#else ++ drv_data->edma_tx_buf, ++#endif ++ (u32)drv_data->dspi_dtfr, ++ MCF_EDMA_TCD_ATTR_SSIZE_32BIT | MCF_EDMA_TCD_ATTR_DSIZE_32BIT, ++ 4, /* soff */ ++ 4, /* nbytes */ ++ 0, /* slast */ ++ tx_count, /* citer */ ++ tx_count, /* biter */ ++ 0, /* doff */ ++ 0, /* dlastsga */ ++ 0, /* major_int */ ++ 1 /* disable_req */ ++ ); ++ ++ mcf_edma_set_tcd_params(DSPI_DMA_RX_TCD, ++ (u32)drv_data->dspi_drfr, ++#ifdef SPI_USE_MMU ++ virt_to_phys(drv_data->edma_rx_buf), ++#else ++ drv_data->edma_rx_buf, ++#endif ++ MCF_EDMA_TCD_ATTR_SSIZE_32BIT | MCF_EDMA_TCD_ATTR_DSIZE_32BIT, ++ 0, /* soff */ ++ 4, /* nbytes */ ++ 0, /* slast */ ++ tx_count, /* citer */ ++ tx_count, /* biter */ ++ 4, /* doff */ ++ 0, /* dlastsga */ ++ 0, /* major_int */ ++ 1 /* disable_req */ ++ ); ++ ++ ++ start_edma_transfer(DSPI_DMA_TX_TCD); /* transmit SPI data */ ++ start_edma_transfer(DSPI_DMA_RX_TCD); /* receive SPI data */ ++ } ++#endif ++ ++#else ++ ++ *drv_data->qar = QSPI_TRANSMIT_RAM; ++ while ((drv_data->tx < drv_data->tx_end) && (tx_count < QSPI_RAM_SIZE)) { ++ if (tx_word) { ++ if ((drv_data->tx_end - drv_data->tx) == 1) ++ break; ++ ++ if (!(drv_data->flags & TRAN_STATE_TX_VOID)) ++ *drv_data->qdr = *(u16 *)drv_data->tx; ++ else ++ *drv_data->qdr = drv_data->void_write_data; ++ drv_data->tx += 2; ++ } else { ++ if (!(drv_data->flags & TRAN_STATE_TX_VOID)) ++ *drv_data->qdr = *(u8 *)drv_data->tx; ++ else ++ *drv_data->qdr = *(u8 *)&drv_data->void_write_data; ++ drv_data->tx++; ++ } ++ tx_count++; ++ } ++ ++ ++ *drv_data->qar = QSPI_COMMAND_RAM; ++ while (cmd_count < tx_count) { ++ u16 qcr = QSPI_COMMAND ++ | QCR_CONT ++ | (~((0x01 << drv_data->cs) << 8) & 0x0F00); ++ ++ if ( (cmd_count == tx_count - 1) ++ && (drv_data->tx == drv_data->tx_end) ++ && (drv_data->cs_change) ) { ++ qcr &= ~QCR_CONT; ++ } ++ *drv_data->qcr = qcr; ++ cmd_count++; ++ } ++ ++ *drv_data->qwr = (*drv_data->qwr & ~QWR_ENDQP_MASK) | ((cmd_count - 1) << 8); ++ ++ /* Fire it up! */ ++ *drv_data->qdlyr |= QDLYR_SPE; ++#endif ++ ++ return tx_count; ++} ++ ++ ++static int read(struct driver_data *drv_data) ++{ ++ int rx_count = 0; ++ int rx_word; ++#if defined(SPI_DSPI_EDMA) ++ u32* rx_edma; ++#endif ++ u16 d; ++ rx_word = is_word_transfer(drv_data); ++ ++#if defined(SPI_DSPI) ++#if defined(SPI_DSPI_EDMA) ++ rx_edma = (u32*) drv_data->edma_tx_buf; ++ while ((drv_data->rx < drv_data->rx_end) && (rx_count < EDMA_BUFFER_SIZE)) { ++#else ++ while ((drv_data->rx < drv_data->rx_end) && (rx_count < DSPI_FIFO_SIZE)) { ++#endif ++ if (rx_word) { ++ if ((drv_data->rx_end - drv_data->rx) == 1) ++ break; ++#if defined(SPI_DSPI_EDMA) ++ d = MCF_DSPI_DRFR_RXDATA(*rx_edma); ++ rx_edma++; ++#else ++ d = MCF_DSPI_DRFR_RXDATA(*drv_data->dspi_drfr); ++#endif ++ ++ if (!(drv_data->flags & TRAN_STATE_RX_VOID)) ++ *(u16 *)drv_data->rx = d; ++ drv_data->rx += 2; ++ } else { ++#if defined(SPI_DSPI_EDMA) ++ d = MCF_DSPI_DRFR_RXDATA(*rx_edma); ++ rx_edma++; ++#else ++ d = MCF_DSPI_DRFR_RXDATA(*drv_data->dspi_drfr); ++#endif ++ if (!(drv_data->flags & TRAN_STATE_RX_VOID)) ++ *(u8 *)drv_data->rx = d; ++ drv_data->rx++; ++ } ++ rx_count++; ++ } ++#else ++ *drv_data->qar = QSPI_RECEIVE_RAM; ++ while ((drv_data->rx < drv_data->rx_end) && (rx_count < QSPI_RAM_SIZE)) { ++ if (rx_word) { ++ if ((drv_data->rx_end - drv_data->rx) == 1) ++ break; ++ ++ if (!(drv_data->flags & TRAN_STATE_RX_VOID)) ++ *(u16 *)drv_data->rx = *drv_data->qdr; ++ drv_data->rx += 2; ++ } else { ++ if (!(drv_data->flags & TRAN_STATE_RX_VOID)) ++ *(u8 *)drv_data->rx = *drv_data->qdr; ++ drv_data->rx++; ++ } ++ rx_count++; ++ } ++#endif ++ ++ return rx_count; ++} ++ ++ ++static inline void qspi_setup_chip(struct driver_data *drv_data) ++{ ++ struct chip_data *chip = drv_data->cur_chip; ++ ++#if defined(SPI_DSPI) ++ ++ *drv_data->mcr = chip->mcr_val; ++ ++ /* TBD: remove later */ ++/* JKM -- validate */ ++ chip->ctar_val = 0x78560118; ++ ++ *drv_data->ctar = chip->ctar_val; ++ *drv_data->dspi_rser = 0 ++ | MCF_DSPI_DRSER_EOQFE ++#if defined(SPI_DSPI_EDMA) ++ | MCF_DSPI_DRSER_TFFFE ++ | MCF_DSPI_DRSER_TFFFS ++#endif ++ ; ++#else ++ *drv_data->qmr = chip->qmr_val; ++ *drv_data->qdlyr = chip->qdlyr_val; ++ *drv_data->qwr = chip->qwr_val; ++ ++ /* ++ * Enable all the interrupts and clear all the flags ++ */ ++ *drv_data->qir = (QIR_SPIFE | QIR_ABRTE | QIR_WCEFE) ++ | (QIR_WCEFB | QIR_ABRTB | QIR_ABRTL) ++ | (QIR_SPIF | QIR_ABRT | QIR_WCEF); ++#endif ++} ++ ++#if defined(SPI_DSPI_EDMA) ++static int edma_tx_handler(int channel, void* dev) ++{ ++ if (channel == DSPI_DMA_TX_TCD) { ++ stop_edma_transfer(DSPI_DMA_TX_TCD); ++ } ++ return IRQ_HANDLED; ++} ++ ++static int edma_rx_handler(int channel, void* dev) ++{ ++ if (channel == DSPI_DMA_RX_TCD) { ++ stop_edma_transfer(DSPI_DMA_RX_TCD); ++ } ++ ++ return IRQ_HANDLED; ++} ++#endif ++ ++static irqreturn_t qspi_interrupt(int irq, void *dev_id) ++{ ++ struct driver_data *drv_data = (struct driver_data *)dev_id; ++ struct spi_message *msg = drv_data->cur_msg; ++#if defined(SPI_DSPI) ++#if !defined(SPI_DSPI_EDMA) ++ u32 irq_status = *drv_data->dspi_sr; ++#endif ++#else ++ u16 irq_status = *drv_data->qir; ++#endif ++ ++ /* Clear all flags immediately */ ++#if defined(SPI_DSPI) ++ *drv_data->dspi_sr = MCF_DSPI_DSR_EOQF; ++#else ++ *drv_data->qir |= (QIR_SPIF | QIR_ABRT | QIR_WCEF); ++#endif ++ ++ if (!drv_data->cur_msg || !drv_data->cur_msg->state) { ++#if !defined(SPI_DSPI_EDMA) ++ /* if eDMA is used it happens some time (at least once)*/ ++ printk(KERN_ERR "coldfire-qspi: bad message or transfer " ++ "state in interrupt handler. IRQ status=%x\n", irq_status); ++#endif ++ return IRQ_NONE; ++ } ++ ++#if !defined(SPI_DSPI) ++ if (irq_status & QIR_SPIF) { ++#endif ++ /* ++ * Read the data into the buffer and reload and start ++ * queue with new data if not finished. If finished ++ * then setup the next transfer ++ */ ++ read(drv_data); ++ ++ if (drv_data->rx == drv_data->rx_end) { ++ /* ++ * Finished now - fall through and schedule next ++ * transfer tasklet ++ */ ++ if (drv_data->flags & TRAN_STATE_WORD_ODD_NUM) { ++ set_16bit_transfer_mode(drv_data); ++ } ++ ++ msg->state = next_transfer(drv_data); ++ msg->actual_length += drv_data->len; ++ } else { ++ /* not finished yet - keep going */ ++ write(drv_data); ++ return IRQ_HANDLED; ++ } ++#if !defined(SPI_DSPI) ++ } else { ++ if (irq_status & QIR_WCEF) ++ drv_data->wce_cnt++; ++ ++ if (irq_status & QIR_ABRT) ++ drv_data->abrt_cnt++; ++ ++ msg->state = ERROR_STATE; ++ } ++#endif ++ ++ tasklet_schedule(&drv_data->pump_transfers); ++ ++ return IRQ_HANDLED; ++} ++ ++/* caller already set message->status; dma and pio irqs are blocked */ ++static void giveback(struct driver_data *drv_data) ++{ ++ struct spi_transfer* last_transfer; ++ unsigned long flags; ++ struct spi_message *msg; ++ ++ spin_lock_irqsave(&drv_data->lock, flags); ++ msg = drv_data->cur_msg; ++ drv_data->cur_msg = NULL; ++ drv_data->cur_transfer = NULL; ++ drv_data->cur_chip = NULL; ++ queue_work(drv_data->workqueue, &drv_data->pump_messages); ++ spin_unlock_irqrestore(&drv_data->lock, flags); ++ ++ last_transfer = list_entry(msg->transfers.prev, ++ struct spi_transfer, ++ transfer_list); ++ ++ if (!last_transfer->cs_change) ++ drv_data->cs_control(drv_data->cs, QSPI_CS_DROP); ++ ++ msg->state = NULL; ++ if (msg->complete) ++ msg->complete(msg->context); ++} ++ ++ ++static void pump_transfers(unsigned long data) ++{ ++ struct driver_data *drv_data = (struct driver_data *)data; ++ struct spi_message *message = NULL; ++ struct spi_transfer *transfer = NULL; ++ struct spi_transfer *previous = NULL; ++ struct chip_data *chip = NULL; ++ unsigned long flags; ++ ++ /* Get current state information */ ++ message = drv_data->cur_msg; ++ transfer = drv_data->cur_transfer; ++ chip = drv_data->cur_chip; ++ ++ /* Handle for abort */ ++ if (message->state == ERROR_STATE) { ++ message->status = -EIO; ++ giveback(drv_data); ++ return; ++ } ++ ++ /* Handle end of message */ ++ if (message->state == DONE_STATE) { ++ message->status = 0; ++ giveback(drv_data); ++ return; ++ } ++ ++ if (message->state == START_STATE) { ++ qspi_setup_chip(drv_data); ++ ++ if (drv_data->cs_control) ++ drv_data->cs_control(message->spi->chip_select, QSPI_CS_ASSERT); ++ } ++ ++ /* Delay if requested at end of transfer*/ ++ if (message->state == RUNNING_STATE) { ++ previous = list_entry(transfer->transfer_list.prev, ++ struct spi_transfer, ++ transfer_list); ++ ++ if (drv_data->cs_control && transfer->cs_change) ++ drv_data->cs_control(message->spi->chip_select, QSPI_CS_DROP); ++ ++ if (previous->delay_usecs) ++ udelay(previous->delay_usecs); ++ ++ if (drv_data->cs_control && transfer->cs_change) ++ drv_data->cs_control(message->spi->chip_select, QSPI_CS_ASSERT); ++ } ++ ++ drv_data->flags = 0; ++ drv_data->tx = (void *)transfer->tx_buf; ++ drv_data->tx_end = drv_data->tx + transfer->len; ++ drv_data->rx = transfer->rx_buf; ++ drv_data->rx_end = drv_data->rx + transfer->len; ++ drv_data->len = transfer->len; ++ if (!drv_data->rx) ++ drv_data->flags |= TRAN_STATE_RX_VOID; ++ if (!drv_data->tx) ++ drv_data->flags |= TRAN_STATE_TX_VOID; ++ drv_data->cs = message->spi->chip_select; ++ drv_data->cs_change = transfer->cs_change; ++ drv_data->void_write_data = chip->void_write_data; ++ ++ message->state = RUNNING_STATE; ++ ++ /* Go baby, go */ ++ local_irq_save(flags); ++ write(drv_data); ++ local_irq_restore(flags); ++} ++ ++ ++static void pump_messages(struct work_struct *work) ++{ ++ struct driver_data *drv_data; ++ unsigned long flags; ++ ++ drv_data = container_of(work, struct driver_data, pump_messages); ++ ++ /* Lock queue and check for queue work */ ++ spin_lock_irqsave(&drv_data->lock, flags); ++ if (list_empty(&drv_data->queue) || drv_data->run == QUEUE_STOPPED) { ++ drv_data->busy = 0; ++ spin_unlock_irqrestore(&drv_data->lock, flags); ++ return; ++ } ++ ++ /* Make sure we are not already running a message */ ++ if (drv_data->cur_msg) { ++ spin_unlock_irqrestore(&drv_data->lock, flags); ++ return; ++ } ++ ++ /* Extract head of queue */ ++ drv_data->cur_msg = list_entry(drv_data->queue.next, ++ struct spi_message, queue); ++ list_del_init(&drv_data->cur_msg->queue); ++ ++ /* Initial message state*/ ++ drv_data->cur_msg->state = START_STATE; ++ drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next, ++ struct spi_transfer, ++ transfer_list); ++ ++ /* Setup the SPI Registers using the per chip configuration */ ++ drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi); ++ ++ /* Mark as busy and launch transfers */ ++ tasklet_schedule(&drv_data->pump_transfers); ++ ++ drv_data->busy = 1; ++ spin_unlock_irqrestore(&drv_data->lock, flags); ++} ++ ++/****************************************************************************/ ++ ++/* ++ * SPI master implementation ++ */ ++ ++static int transfer(struct spi_device *spi, struct spi_message *msg) ++{ ++ struct driver_data *drv_data = spi_master_get_devdata(spi->master); ++ unsigned long flags; ++ ++ spin_lock_irqsave(&drv_data->lock, flags); ++ ++ if (drv_data->run == QUEUE_STOPPED) { ++ spin_unlock_irqrestore(&drv_data->lock, flags); ++ return -ESHUTDOWN; ++ } ++ ++ msg->actual_length = 0; ++ msg->status = -EINPROGRESS; ++ msg->state = START_STATE; ++ ++ list_add_tail(&msg->queue, &drv_data->queue); ++ ++ if (drv_data->run == QUEUE_RUNNING && !drv_data->busy) ++ queue_work(drv_data->workqueue, &drv_data->pump_messages); ++ ++ spin_unlock_irqrestore(&drv_data->lock, flags); ++ ++ return 0; ++} ++ ++ ++static int setup(struct spi_device *spi) ++{ ++ struct coldfire_spi_chip *chip_info; ++ struct chip_data *chip; ++#ifndef SPI_DSPI ++ u32 baud_divisor = 255; ++#endif ++ ++ chip_info = (struct coldfire_spi_chip *)spi->controller_data; ++ ++ /* Only alloc on first setup */ ++ chip = spi_get_ctldata(spi); ++ if (chip == NULL) { ++ chip = kcalloc(1, sizeof(struct chip_data), GFP_KERNEL); ++ if (!chip) ++ return -ENOMEM; ++ spi->mode = chip_info->mode; ++ spi->bits_per_word = chip_info->bits_per_word; ++ } ++ ++#if defined(SPI_DSPI) ++ chip->mcr.master = 1; ++ chip->mcr.cont_scke = 0; ++ chip->mcr.dconf = 0; ++ chip->mcr.frz = 0; ++ chip->mcr.mtfe = 0; ++ chip->mcr.pcsse = 0; ++ chip->mcr.rooe = 0; ++ chip->mcr.pcsis = 0xFF; ++ chip->mcr.reserved15 = 0; ++ chip->mcr.mdis = 0; ++ chip->mcr.dis_tx = 0; ++ chip->mcr.dis_rxf = 0; ++ chip->mcr.clr_tx = 1; ++ chip->mcr.clr_rxf = 1; ++ chip->mcr.smpl_pt = 0; ++ chip->mcr.reserved71 = 0; ++ chip->mcr.halt = 0; ++ ++ if ((spi->bits_per_word >= 4) && (spi->bits_per_word <= 16)) { ++ chip->ctar.fmsz = spi->bits_per_word-1; ++ } else { ++ printk(KERN_ERR "coldfire-spi: invalid wordsize\n"); ++ kfree(chip); ++ return -ENODEV; ++ } ++ ++ if (spi->mode & SPI_CPHA) ++ chip->ctar.cpha = 1; ++ else ++ chip->ctar.cpha = 0; ++ ++ if (spi->mode & SPI_CPOL) ++ chip->ctar.cpol = 1; ++ else ++ chip->ctar.cpol = 0; ++ ++ if (spi->mode & SPI_LSB_FIRST) ++ chip->ctar.lsbfe = 1; ++ else ++ chip->ctar.lsbfe = 0; ++ ++ /* This values are default for audio device */ ++ chip->ctar.dbr = 0; ++ chip->ctar.pbr = 2; ++ chip->ctar.br = 8; ++ ++ /* This values are default for audio device */ ++ chip->ctar.pcssck = 1; ++ chip->ctar.pasc = 1; ++ chip->ctar.pdt = 1; ++ chip->ctar.cssck = 0; ++ chip->ctar.asc = 1; ++ chip->ctar.dt = 1; ++ ++ chip->void_write_data = chip_info->void_write_data; ++ ++#else ++ ++ chip->qwr.csiv = 1; /* Chip selects are active low */ ++ chip->qmr.master = 1; /* Must set to master mode */ ++ chip->qmr.dohie = 1; /* Data output high impediance enabled */ ++ chip->void_write_data = chip_info->void_write_data; ++ ++ chip->qdlyr.qcd = chip_info->del_cs_to_clk; ++ chip->qdlyr.dtl = chip_info->del_after_trans; ++ ++ if (spi->max_speed_hz != 0) ++ baud_divisor = (MCF_CLK/(2*spi->max_speed_hz)); ++ ++ if (baud_divisor < 2) ++ baud_divisor = 2; ++ ++ if (baud_divisor > 255) ++ baud_divisor = 255; ++ ++ chip->qmr.baud = baud_divisor; ++ ++ /*printk( "SPI: spi->max_speed_hz %d\n", spi->max_speed_hz );*/ ++ /*printk( "SPI: Baud set to %d\n", chip->qmr.baud );*/ ++ ++ if (spi->mode & SPI_CPHA) ++ chip->qmr.cpha = 1; ++ ++ if (spi->mode & SPI_CPOL) ++ chip->qmr.cpol = 1; ++ ++ if (spi->bits_per_word == 16) { ++ chip->qmr.bits = 0; ++ } else if ((spi->bits_per_word >= 8) && (spi->bits_per_word <= 15)) { ++ chip->qmr.bits = spi->bits_per_word; ++ } else { ++ printk(KERN_ERR "coldfire-spi: invalid wordsize\n"); ++ kfree(chip); ++ return -ENODEV; ++ } ++ ++#endif ++ ++ spi_set_ctldata(spi, chip); ++ ++ return 0; ++} ++ ++static int init_queue(struct driver_data *drv_data) ++{ ++ INIT_LIST_HEAD(&drv_data->queue); ++ spin_lock_init(&drv_data->lock); ++ ++ drv_data->run = QUEUE_STOPPED; ++ drv_data->busy = 0; ++ ++ tasklet_init(&drv_data->pump_transfers, ++ pump_transfers, (unsigned long)drv_data); ++ ++ INIT_WORK(&drv_data->pump_messages, pump_messages); ++ ++ drv_data->workqueue = create_singlethread_workqueue( ++ drv_data->master->dev.parent->bus_id); ++ if (drv_data->workqueue == NULL) ++ return -EBUSY; ++ ++ return 0; ++} ++ ++static int start_queue(struct driver_data *drv_data) ++{ ++ unsigned long flags; ++ ++ spin_lock_irqsave(&drv_data->lock, flags); ++ ++ if (drv_data->run == QUEUE_RUNNING || drv_data->busy) { ++ spin_unlock_irqrestore(&drv_data->lock, flags); ++ return -EBUSY; ++ } ++ ++ drv_data->run = QUEUE_RUNNING; ++ drv_data->cur_msg = NULL; ++ drv_data->cur_transfer = NULL; ++ drv_data->cur_chip = NULL; ++ spin_unlock_irqrestore(&drv_data->lock, flags); ++ ++ queue_work(drv_data->workqueue, &drv_data->pump_messages); ++ ++ return 0; ++} ++ ++static int stop_queue(struct driver_data *drv_data) ++{ ++ unsigned long flags; ++ unsigned limit = 500; ++ int status = 0; ++ ++ spin_lock_irqsave(&drv_data->lock, flags); ++ ++ /* This is a bit lame, but is optimized for the common execution path. ++ * A wait_queue on the drv_data->busy could be used, but then the common ++ * execution path (pump_messages) would be required to call wake_up or ++ * friends on every SPI message. Do this instead */ ++ drv_data->run = QUEUE_STOPPED; ++ while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) { ++ spin_unlock_irqrestore(&drv_data->lock, flags); ++ msleep(10); ++ spin_lock_irqsave(&drv_data->lock, flags); ++ } ++ ++ if (!list_empty(&drv_data->queue) || drv_data->busy) ++ status = -EBUSY; ++ ++ spin_unlock_irqrestore(&drv_data->lock, flags); ++ ++ return status; ++} ++ ++static int destroy_queue(struct driver_data *drv_data) ++{ ++ int status; ++ ++ status = stop_queue(drv_data); ++ if (status != 0) ++ return status; ++ ++ destroy_workqueue(drv_data->workqueue); ++ ++ return 0; ++} ++ ++ ++static void cleanup(struct spi_device *spi) ++{ ++ struct chip_data *chip = spi_get_ctldata((struct spi_device *)spi); ++ ++ dev_dbg(&spi->dev, "spi_device %u.%u cleanup\n", ++ spi->master->bus_num, spi->chip_select); ++ ++ kfree(chip); ++} ++ ++ ++/****************************************************************************/ ++ ++/* ++ * Generic Device driver routines and interface implementation ++ */ ++ ++static int coldfire_spi_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct coldfire_spi_master *platform_info; ++ struct spi_master *master; ++ struct driver_data *drv_data = 0; ++ struct resource *memory_resource; ++ int irq; ++ int status = 0; ++ int i; ++ ++ platform_info = (struct coldfire_spi_master *)pdev->dev.platform_data; ++ ++ master = spi_alloc_master(dev, sizeof(struct driver_data)); ++ if (!master) ++ return -ENOMEM; ++ ++ drv_data = spi_master_get_devdata(master); ++ drv_data->master = master; ++ ++ INIT_LIST_HEAD(&drv_data->queue); ++ spin_lock_init(&drv_data->lock); ++ ++ master->bus_num = platform_info->bus_num; ++ master->num_chipselect = platform_info->num_chipselect; ++ master->cleanup = cleanup; ++ master->setup = setup; ++ master->transfer = transfer; ++ ++ drv_data->cs_control = platform_info->cs_control; ++ if (drv_data->cs_control) ++ for(i = 0; i < master->num_chipselect; i++) ++ drv_data->cs_control(i, QSPI_CS_INIT | QSPI_CS_DROP); ++ ++ /* Setup register addresses */ ++ memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM, "spi-module"); ++ if (!memory_resource) { ++ dev_dbg(dev, "can not find platform module memory\n"); ++ goto out_error_master_alloc; ++ } ++ ++#if defined(SPI_DSPI_EDMA) ++ drv_data->edma_tx_buf = kmalloc(EDMA_BUFSIZE_KMALLOC, GFP_DMA); ++ if (!drv_data->edma_tx_buf) { ++ dev_dbg(dev, "cannot allocate eDMA TX memory\n"); ++ goto out_error_master_alloc; ++ } ++ drv_data->edma_rx_buf = kmalloc(EDMA_BUFSIZE_KMALLOC, GFP_DMA); ++ if (!drv_data->edma_rx_buf) { ++ kfree(drv_data->edma_tx_buf); ++ dev_dbg(dev, "cannot allocate eDMA RX memory\n"); ++ goto out_error_master_alloc; ++ } ++#endif ++ ++#if defined(SPI_DSPI) ++ ++ drv_data->mcr = (void *)(memory_resource->start + 0x00000000); ++ drv_data->ctar = (void *)(memory_resource->start + 0x0000000C); ++ drv_data->dspi_sr = (void *)(memory_resource->start + 0x0000002C); ++ drv_data->dspi_rser = (void *)(memory_resource->start + 0x00000030); ++ drv_data->dspi_dtfr = (void *)(memory_resource->start + 0x00000034); ++ drv_data->dspi_drfr = (void *)(memory_resource->start + 0x00000038); ++ ++#else ++ ++ drv_data->qmr = (void *)(memory_resource->start + 0x00000000); ++ drv_data->qdlyr = (void *)(memory_resource->start + 0x00000004); ++ drv_data->qwr = (void *)(memory_resource->start + 0x00000008); ++ drv_data->qir = (void *)(memory_resource->start + 0x0000000c); ++ drv_data->qar = (void *)(memory_resource->start + 0x00000010); ++ drv_data->qdr = (void *)(memory_resource->start + 0x00000014); ++ drv_data->qcr = (void *)(memory_resource->start + 0x00000014); ++ ++#endif ++ ++ /* Setup register addresses */ ++ memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM, "spi-par"); ++ if (!memory_resource) { ++ dev_dbg(dev, "can not find platform par memory\n"); ++ goto out_error_master_alloc; ++ } ++ ++ drv_data->par = (void *)memory_resource->start; ++ ++ /* Setup register addresses */ ++ memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM, "spi-int-level"); ++ if (!memory_resource) { ++ dev_dbg(dev, "can not find platform par memory\n"); ++ goto out_error_master_alloc; ++ } ++ ++ drv_data->int_icr = (void *)memory_resource->start; ++ ++ /* Setup register addresses */ ++ memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM, "spi-int-mask"); ++ if (!memory_resource) { ++ dev_dbg(dev, "can not find platform par memory\n"); ++ goto out_error_master_alloc; ++ } ++ ++ drv_data->int_mr = (void *)memory_resource->start; ++ ++ if (platform_info->irq_list) { ++ /* multiple IRQs */ ++ int *irqlist = platform_info->irq_list; ++ while ((irq = *irqlist++)) { ++ int off = *irqlist++; ++ int lvl = *irqlist++; ++ int msk = *irqlist++; ++ status = request_irq(irq, qspi_interrupt, IRQF_DISABLED, ++ dev->bus_id, drv_data); ++ if (status < 0) { ++ dev_err(&pdev->dev, ++ "unable to attach ColdFire DSPI interrupt\n"); ++ goto out_error_master_alloc; ++ } ++ ++ if (lvl) ++ *(drv_data->int_icr + off) = lvl; ++ ++ if (msk) ++ *drv_data->int_mr &= ~msk; ++ } ++ } ++ else { ++ irq = platform_info->irq_vector; ++ ++ status = request_irq(platform_info->irq_vector, qspi_interrupt, ++ IRQF_DISABLED, dev->bus_id, drv_data); ++ if (status < 0) { ++ dev_err(&pdev->dev, "unable to attach ColdFire QSPI interrupt\n"); ++ goto out_error_master_alloc; ++ } ++ ++ *drv_data->int_icr = platform_info->irq_lp; ++ *drv_data->int_mr &= ~platform_info->irq_mask; ++ } ++ ++ /* Now that we have all the addresses etc. Let's set it up */ ++ if (platform_info->par_val) ++ *drv_data->par = platform_info->par_val; ++ ++#ifdef CONFIG_M5227x ++ MCF_GPIO_PAR_IRQ = 0x04; /* Mistake in RM documentation */ ++#endif ++ ++#ifdef SPI_DSPI ++ drv_data->dspi_ctas = 0; /* TBD: change later */ ++#endif ++ ++ /* Initial and start queue */ ++ status = init_queue(drv_data); ++ if (status != 0) { ++ dev_err(&pdev->dev, "problem initializing queue\n"); ++ goto out_error_irq_alloc; ++ } ++ status = start_queue(drv_data); ++ if (status != 0) { ++ dev_err(&pdev->dev, "problem starting queue\n"); ++ goto out_error_irq_alloc; ++ } ++ ++ /* Register with the SPI framework */ ++ platform_set_drvdata(pdev, drv_data); ++ status = spi_register_master(master); ++ if (status != 0) { ++ dev_err(&pdev->dev, "problem registering spi master\n"); ++ status = -EINVAL; ++ goto out_error_queue_alloc; ++ } ++ ++#if defined(SPI_DSPI_EDMA) ++ if (mcf_edma_request_channel(DSPI_DMA_TX_TCD, ++ edma_tx_handler, ++ NULL, ++ pdev, ++ NULL, /* spinlock */ ++ DRIVER_NAME ++ )!=0) { ++ dev_err(&pdev->dev, "problem requesting edma transmit channel\n"); ++ status = -EINVAL; ++ goto out_error_queue_alloc; ++ } ++ ++ if (mcf_edma_request_channel(DSPI_DMA_RX_TCD, ++ edma_rx_handler, ++ NULL, ++ pdev, ++ NULL, /* spinlock */ ++ DRIVER_NAME ++ )!=0) { ++ dev_err(&pdev->dev, "problem requesting edma receive channel\n"); ++ status = -EINVAL; ++ goto out_edma_transmit; ++ } ++#endif ++ ++ printk(KERN_INFO "SPI: Coldfire master initialized\n" ); ++ return status; ++ ++#if defined(SPI_DSPI_EDMA) ++out_edma_transmit: ++ mcf_edma_free_channel(DSPI_DMA_TX_TCD, pdev); ++#endif ++ ++out_error_queue_alloc: ++ destroy_queue(drv_data); ++ ++out_error_irq_alloc: ++ free_irq(irq, drv_data); ++ ++out_error_master_alloc: ++ spi_master_put(master); ++ return status; ++ ++} ++ ++static int coldfire_spi_remove(struct platform_device *pdev) ++{ ++ struct driver_data *drv_data = platform_get_drvdata(pdev); ++ int irq; ++ int status = 0; ++ ++ if (!drv_data) ++ return 0; ++ ++#if defined(SPI_DSPI_EDMA) ++ mcf_edma_free_channel(DSPI_DMA_TX_TCD, pdev); ++ mcf_edma_free_channel(DSPI_DMA_RX_TCD, pdev); ++#endif ++ ++ /* Remove the queue */ ++ status = destroy_queue(drv_data); ++ if (status != 0) ++ return status; ++ ++ /* Release IRQ */ ++/* JKM -- check for list and remove list */ ++ irq = platform_get_irq(pdev, 0); ++ if (irq >= 0) ++ free_irq(irq, drv_data); ++ ++ /* Disconnect from the SPI framework */ ++ spi_unregister_master(drv_data->master); ++ ++ /* Prevent double remove */ ++ platform_set_drvdata(pdev, NULL); ++ ++ return 0; ++} ++ ++static void coldfire_spi_shutdown(struct platform_device *pdev) ++{ ++ int status = 0; ++ ++ if ((status = coldfire_spi_remove(pdev)) != 0) ++ dev_err(&pdev->dev, "shutdown failed with %d\n", status); ++} ++ ++ ++#ifdef CONFIG_PM ++static int suspend_devices(struct device *dev, void *pm_message) ++{ ++ pm_message_t *state = pm_message; ++ ++ if (dev->power.power_state.event != state->event) { ++ dev_warn(dev, "pm state does not match request\n"); ++ return -1; ++ } ++ ++ return 0; ++} ++ ++static int coldfire_spi_suspend(struct platform_device *pdev, pm_message_t state) ++{ ++ struct driver_data *drv_data = platform_get_drvdata(pdev); ++ int status = 0; ++ ++ /* Check all childern for current power state */ ++ if (device_for_each_child(&pdev->dev, &state, suspend_devices) != 0) { ++ dev_warn(&pdev->dev, "suspend aborted\n"); ++ return -1; ++ } ++ ++ status = stop_queue(drv_data); ++ if (status != 0) ++ return status; ++ ++ return 0; ++} ++ ++static int coldfire_spi_resume(struct platform_device *pdev) ++{ ++ struct driver_data *drv_data = platform_get_drvdata(pdev); ++ int status = 0; ++ ++ /* Start the queue running */ ++ status = start_queue(drv_data); ++ if (status != 0) { ++ dev_err(&pdev->dev, "problem starting queue (%d)\n", status); ++ return status; ++ } ++ ++ return 0; ++} ++#else ++#define coldfire_spi_suspend NULL ++#define coldfire_spi_resume NULL ++#endif /* CONFIG_PM */ ++ ++static struct platform_driver driver = { ++ .driver = { ++ .name = "spi_coldfire", ++ .bus = &platform_bus_type, ++ .owner = THIS_MODULE, ++ }, ++ .probe = coldfire_spi_probe, ++ .remove = __devexit_p(coldfire_spi_remove), ++ .shutdown = coldfire_spi_shutdown, ++ .suspend = coldfire_spi_suspend, ++ .resume = coldfire_spi_resume, ++}; ++ ++static int __init coldfire_spi_init(void) ++{ ++ platform_driver_register(&driver); ++ ++ return 0; ++} ++module_init(coldfire_spi_init); ++ ++static void __exit coldfire_spi_exit(void) ++{ ++ platform_driver_unregister(&driver); ++} ++module_exit(coldfire_spi_exit); +--- /dev/null ++++ b/drivers/spi/spi-m5445x.c +@@ -0,0 +1,156 @@ ++/***************************************************************************/ ++/* ++ * linux/arch/m68k/coldfire/spi-m5445x.c ++ * ++ * Sub-architcture dependant initialization code for the Freescale ++ * 5445x SPI module ++ * ++ * Yaroslav Vinogradov yaroslav.vinogradov@freescale.com ++ * Copyright Freescale Semiconductor, Inc 2007 ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++/***************************************************************************/ ++ ++ ++#include <linux/kernel.h> ++#include <linux/sched.h> ++#include <linux/param.h> ++#include <linux/init.h> ++#include <linux/interrupt.h> ++#include <linux/device.h> ++#include <linux/platform_device.h> ++#include <linux/spi/spi.h> ++ ++#include <asm/dma.h> ++#include <asm/traps.h> ++#include <asm/machdep.h> ++#include <asm/coldfire.h> ++#include <asm/mcfsim.h> ++#include <asm/mcfqspi.h> ++#include <asm/mcf5445x_gpio.h> ++ ++#define SPI_NUM_CHIPSELECTS 0x10 ++#define SPI_PAR_VAL (0 | MCF_GPIO_PAR_DSPI_PCS5_PCS5 | MCF_GPIO_PAR_DSPI_PCS2_PCS2 \ ++ | MCF_GPIO_PAR_DSPI_PCS1_PCS1 | MCF_GPIO_PAR_DSPI_PCS0_PCS0 | MCF_GPIO_PAR_DSPI_SIN_SIN \ ++ | MCF_GPIO_PAR_DSPI_SOUT_SOUT | MCF_GPIO_PAR_DSPI_SCK_SCK) ++ ++#define MCF5445x_DSPI_IRQ_SOURCE (31) ++#define MCF5445x_DSPI_IRQ_VECTOR (64 + MCF5445x_DSPI_IRQ_SOURCE) ++ ++#define MCF5445x_DSPI_PAR (0xFC0A4063) ++#define MCF5445x_DSPI_MCR (0xFC05C000) ++#define MCF5445x_INTC0_ICR (0xFC048040) ++#define MCF5445x_INTC0_IMRL (0xFC04800C) ++ ++ ++#define M5445x_AUDIO_IRQ_SOURCE 49 ++#define M5445x_AUDIO_IRQ_VECTOR (128+M5445x_AUDIO_IRQ_SOURCE) ++#define M5445x_AUDIO_IRQ_LEVEL 4 ++ ++void coldfire_qspi_cs_control(u8 cs, u8 command) ++{ ++} ++ ++#if defined(CONFIG_SPI_COLDFIRE_SSI_AUDIO) ++static struct coldfire_spi_chip ssi_audio_chip_info = { ++ .mode = SPI_MODE_0, ++ .bits_per_word = 16, ++ .del_cs_to_clk = 16, ++ .del_after_trans = 16, ++ .void_write_data = 0 ++}; ++ ++#endif ++ ++static struct spi_board_info spi_board_info[] = { ++ ++#if defined(CONFIG_SPI_COLDFIRE_SSI_AUDIO) ++ { ++ .modalias = "ssi_audio", ++ .max_speed_hz = 300000, ++ .bus_num = 1, ++ .chip_select = 5, ++ .irq = M5445x_AUDIO_IRQ_VECTOR, ++ .platform_data = NULL, ++ .controller_data = &ssi_audio_chip_info ++ } ++#endif ++ ++}; ++ ++static struct coldfire_spi_master coldfire_master_info = { ++ .bus_num = 1, ++ .num_chipselect = SPI_NUM_CHIPSELECTS, ++ .irq_source = MCF5445x_DSPI_IRQ_SOURCE, ++ .irq_vector = MCF5445x_DSPI_IRQ_VECTOR, ++ .irq_mask = (0x01 << MCF5445x_DSPI_IRQ_SOURCE), ++ .irq_lp = 0x2, /* Level */ ++ .par_val = SPI_PAR_VAL, ++// .par_val16 = SPI_PAR_VAL, ++ .cs_control = coldfire_qspi_cs_control, ++}; ++ ++static struct resource coldfire_spi_resources[] = { ++ [0] = { ++ .name = "qspi-par", ++ .start = MCF5445x_DSPI_PAR, ++ .end = MCF5445x_DSPI_PAR, ++ .flags = IORESOURCE_MEM ++ }, ++ ++ [1] = { ++ .name = "qspi-module", ++ .start = MCF5445x_DSPI_MCR, ++ .end = MCF5445x_DSPI_MCR + 0xB8, ++ .flags = IORESOURCE_MEM ++ }, ++ ++ [2] = { ++ .name = "qspi-int-level", ++ .start = MCF5445x_INTC0_ICR + MCF5445x_DSPI_IRQ_SOURCE, ++ .end = MCF5445x_INTC0_ICR + MCF5445x_DSPI_IRQ_SOURCE, ++ .flags = IORESOURCE_MEM ++ }, ++ ++ [3] = { ++ .name = "qspi-int-mask", ++ .start = MCF5445x_INTC0_IMRL, ++ .end = MCF5445x_INTC0_IMRL, ++ .flags = IORESOURCE_MEM ++ } ++}; ++ ++static struct platform_device coldfire_spi = { ++ .name = "spi_coldfire", //"coldfire-qspi", ++ .id = -1, ++ .resource = coldfire_spi_resources, ++ .num_resources = ARRAY_SIZE(coldfire_spi_resources), ++ .dev = { ++ .platform_data = &coldfire_master_info, ++ } ++}; ++ ++static int __init spi_dev_init(void) ++{ ++ int retval = 0; ++ ++ retval = platform_device_register(&coldfire_spi); ++ ++ if (retval < 0) { ++ printk(KERN_ERR "SPI-m5445x: platform_device_register failed with code=%d\n", retval); ++ goto out; ++ } ++ ++ if (ARRAY_SIZE(spi_board_info)) ++ retval = spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); ++ ++ ++out: ++ return retval; ++} ++ ++arch_initcall(spi_dev_init); +--- /dev/null ++++ b/drivers/spi/ssi_audio.c +@@ -0,0 +1,921 @@ ++/* ++ * MCF5445x audio driver. ++ * ++ * Yaroslav Vinogradov yaroslav.vinogradov@freescale.com ++ * Copyright Freescale Semiconductor, Inc. 2006, 2007 ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++ ++#include <linux/device.h> ++#include <linux/init.h> ++#include <linux/delay.h> ++#include <linux/spi/spi.h> ++#include <linux/fs.h> ++#include <linux/kernel.h> ++#include <linux/major.h> ++#include <asm/mcfsim.h> ++#include <linux/interrupt.h> ++#include <linux/soundcard.h> ++#include <asm/uaccess.h> ++#include <asm/virtconvert.h> ++ ++#include <asm/coldfire.h> ++#include <asm/coldfire_edma.h> ++#ifdef CONFIG_M5445X ++#include <asm/mcf5445x_ssi.h> ++#include <asm/mcf5445x_ccm.h> ++#include <asm/mcf5445x_gpio.h> ++#endif ++ ++#define SOUND_DEVICE_NAME "sound" ++#define DRIVER_NAME "ssi_audio" ++ ++/* #define AUDIO_DEBUG */ ++ ++#ifdef CONFIG_MMU ++#define USE_MMU ++#endif ++ ++#define MAX_SPEED_HZ 12000000 ++ ++#define M5445x_AUDIO_IRQ_SOURCE 49 ++#define M5445x_AUDIO_IRQ_VECTOR (128+M5445x_AUDIO_IRQ_SOURCE) ++#define M5445x_AUDIO_IRQ_LEVEL 5 ++ ++/* TLV320DAC23 audio chip registers */ ++ ++#define CODEC_LEFT_IN_REG (0x00) ++#define CODEC_RIGHT_IN_REG (0x01) ++#define CODEC_LEFT_HP_VOL_REG (0x02) ++#define CODEC_RIGHT_HP_VOL_REG (0x03) ++#define CODEC_ANALOG_APATH_REG (0x04) ++#define CODEC_DIGITAL_APATH_REG (0x05) ++#define CODEC_POWER_DOWN_REG (0x06) ++#define CODEC_DIGITAL_IF_FMT_REG (0x07) ++#define CODEC_SAMPLE_RATE_REG (0x08) ++#define CODEC_DIGITAL_IF_ACT_REG (0x09) ++#define CODEC_RESET_REG (0x0f) ++ ++#define CODEC_SAMPLE_8KHZ (0x0C) ++#define CODEC_SAMPLE_16KHZ (0x58) ++#define CODEC_SAMPLE_22KHZ (0x62) ++#define CODEC_SAMPLE_32KHZ (0x18) ++#define CODEC_SAMPLE_44KHZ (0x22) ++#define CODEC_SAMPLE_48KHZ (0x00) ++ ++/* Audio buffer data size */ ++#define BUFSIZE (64*1024) ++/* DMA transfer size */ ++#define DMASIZE (16*1024) ++ ++/* eDMA channel for SSI channel 0 TX */ ++#define DMA_TCD MCF_EDMA_CHAN_TIMER2 ++/* eDMA channel for SSI channel 1 TX */ ++#define DMA_TCD2 MCF_EDMA_CHAN_TIMER3 ++ ++struct ssi_audio { ++ struct spi_device *spi; ++ u32 speed; ++ u32 stereo; ++ u32 bits; ++ u32 format; ++ u8 isopen; ++ u8 dmaing; ++ u8 ssi_enabled; ++ u8 channel; ++ spinlock_t lock; ++ u8* audio_buf; ++}; ++ ++static struct ssi_audio* audio_device = NULL; ++volatile u32 audio_start; ++volatile u32 audio_count; ++volatile u32 audio_append; ++volatile u32 audio_appstart; ++volatile u32 audio_txbusy; ++ ++struct ssi_audio_format { ++ unsigned int format; ++ unsigned int bits; ++} ssi_audio_formattable[] = { ++ { AFMT_MU_LAW, 8 }, ++ { AFMT_A_LAW, 8 }, ++ { AFMT_IMA_ADPCM, 8 }, ++ { AFMT_U8, 8 }, ++ { AFMT_S16_LE, 16 }, ++ { AFMT_S16_BE, 16 }, ++ { AFMT_S8, 8 }, ++ { AFMT_U16_LE, 16 }, ++ { AFMT_U16_BE, 16 }, ++}; ++ ++#define FORMATSIZE (sizeof(ssi_audio_formattable) / sizeof(struct ssi_audio_format)) ++ ++static void ssi_audio_setsamplesize(int val) ++{ ++ int i; ++ ++ if (audio_device == NULL) return; ++ ++ for (i = 0; (i < FORMATSIZE); i++) { ++ if (ssi_audio_formattable[i].format == val) { ++ audio_device->format = ssi_audio_formattable[i].format; ++ audio_device->bits = ssi_audio_formattable[i].bits; ++ break; ++ } ++ } ++ ++#ifdef AUDIO_DEBUG ++ printk(DRIVER_NAME ":ssi_audio_setsamplesize %d %d\n", ++ audio_device->format, audio_device->bits); ++#endif ++} ++ ++static void ssi_audio_txdrain(void) ++{ ++#ifdef AUDIO_DEBUG ++ printk(DRIVER_NAME ":ssi_audio_txdrain()\n"); ++#endif ++ ++ if (audio_device == NULL) return; ++ ++ while (!signal_pending(current)) { ++ if (audio_txbusy == 0) ++ break; ++ current->state = TASK_INTERRUPTIBLE; ++ schedule_timeout(1); ++ } ++} ++ ++#ifdef CONFIG_SSIAUDIO_USE_EDMA ++/* ++ * Configure and start DMA engine. ++ */ ++void __inline__ ssi_audio_dmarun(void) ++{ ++ set_edma_params(DMA_TCD, ++#ifdef USE_MMU ++ virt_to_phys(&(audio_device->audio_buf[audio_start])), ++#else ++ (u32)&(audio_device->audio_buf[audio_start]), ++#endif ++ (u32)&MCF_SSI_TX0, ++ MCF_EDMA_TCD_ATTR_SSIZE_32BIT | MCF_EDMA_TCD_ATTR_DSIZE_32BIT, ++ 8, ++ 4, ++ 0, ++ audio_count/8, ++ audio_count/8, ++ 0, ++ 0, ++ 0, // major_int ++ 0 // disable_req ++ ); ++ ++ set_edma_params(DMA_TCD2, ++#ifdef USE_MMU ++ virt_to_phys(&(audio_device->audio_buf[audio_start+4])), ++#else ++ (u32)&(audio_device->audio_buf[audio_start+4]), ++#endif ++ (u32)&MCF_SSI_TX1, ++ MCF_EDMA_TCD_ATTR_SSIZE_32BIT | MCF_EDMA_TCD_ATTR_DSIZE_32BIT, ++ 8, ++ 4, ++ 0, ++ audio_count/8, ++ audio_count/8, ++ 0, ++ 0, ++ 1, // major_int ++ 0 // disable_req ++ ); ++ ++ audio_device->dmaing = 1; ++ audio_txbusy = 1; ++ ++ start_edma_transfer(DMA_TCD); ++ start_edma_transfer(DMA_TCD2); ++} ++ ++/** ++ * ssi_audio_dmabuf - Start DMA'ing a new buffer of data if any available. ++ */ ++static void ssi_audio_dmabuf(void) ++{ ++#ifdef AUDIO_DEBUG ++ printk(DRIVER_NAME ":ssi_audio_dmabuf(): append=%x start=%x\n", ++ audio_append, audio_appstart); ++#endif ++ ++ /* If already running then nothing to do... */ ++ if (audio_device->dmaing) ++ return; ++ ++ /* Set DMA buffer size */ ++ audio_count = (audio_append >= audio_appstart) ? ++ (audio_append - audio_appstart) : ++ (BUFSIZE - audio_appstart); ++ if (audio_count > DMASIZE) ++ audio_count = DMASIZE; ++ ++ /* Adjust pointers and counters accordingly */ ++ audio_appstart += audio_count; ++ if (audio_appstart >= BUFSIZE) ++ audio_appstart = 0; ++ ++ if (audio_count > 0) ++ ssi_audio_dmarun(); ++ else { ++ audio_txbusy = 0; ++#ifdef AUDIO_DEBUG ++ printk(DRIVER_NAME ":DMA buffer is empty!\n"); ++#endif ++ } ++} ++ ++void __inline__ stop_dma(void) ++{ ++ stop_edma_transfer(DMA_TCD); ++ stop_edma_transfer(DMA_TCD2); ++} ++ ++static int ssi_audio_dma_handler_empty(int channel, void *dev_id) ++{ ++ return IRQ_HANDLED; ++} ++ ++static int ssi_audio_dma_handler(int channel, void *dev_id) ++{ ++#ifdef AUDIO_DEBUG ++ printk(DRIVER_NAME ":ssi_audio_dma_handler(channel=%d)\n", channel); ++#endif ++ ++ /* Clear DMA interrupt */ ++ stop_dma(); ++ ++ audio_device->dmaing = 0; ++ ++ /* Update data pointers and counts */ ++ audio_start += audio_count; ++ if (audio_start >= BUFSIZE) ++ audio_start = 0; ++ audio_count = 0; ++ ++ /* Start new DMA buffer if we can */ ++ ssi_audio_dmabuf(); ++ ++ return IRQ_HANDLED; ++} ++ ++static void init_dma(void) ++{ ++ /* SSI DMA Signals mapped to DMA request */ ++ MCF_CCM_MISCCR &= ~MCF_CCM_MISCCR_TIMDMA; ++ init_edma(); ++} ++ ++#endif /* CONFIG_SSIAUDIO_USE_EDMA */ ++ ++/* Write CODEC register using SPI ++ * address - CODEC register address ++ * data - data to be written into register ++ */ ++static int codec_write(u8 addr, u16 data) ++{ ++ u16 spi_word; ++ ++ if (audio_device==NULL || audio_device->spi==NULL) ++ return -ENODEV; ++ ++ spi_word = ((addr & 0x7F)<<9)|(data & 0x1FF); ++ return spi_write(audio_device->spi, (const u8*)&spi_word, ++ sizeof(spi_word)); ++} ++ ++static inline void enable_ssi(void) ++{ ++ if (audio_device==NULL || audio_device->ssi_enabled) return; ++ audio_device->ssi_enabled = 1; ++ MCF_SSI_CR |= MCF_SSI_CR_SSI_EN; /* enable SSI module */ ++ MCF_SSI_CR |= MCF_SSI_CR_TE; /* enable tranmitter */ ++} ++ ++static inline void disable_ssi(void) ++{ ++ if (audio_device==NULL || audio_device->ssi_enabled==0) return; ++ MCF_SSI_CR &= ~MCF_SSI_CR_TE; /* disable transmitter */ ++ MCF_SSI_CR &= ~MCF_SSI_CR_SSI_EN; /* disable SSI module */ ++ audio_device->ssi_enabled = 0; ++} ++ ++/* Audio CODEC initialization */ ++static void adjust_codec_speed(void) { ++#ifdef AUDIO_DEBUG ++ printk(DRIVER_NAME ":adjust_codec_speed: %d\n", audio_device->speed); ++#endif ++ disable_ssi(); ++ switch (audio_device->speed) { ++ case 8000: ++ MCF_CCM_CDR = MCF_CCM_CDR_SSIDIV(255); ++ codec_write(CODEC_SAMPLE_RATE_REG,CODEC_SAMPLE_8KHZ); ++ break; ++ case 16000: ++ MCF_CCM_CDR = MCF_CCM_CDR_SSIDIV(129); ++ codec_write(CODEC_SAMPLE_RATE_REG,CODEC_SAMPLE_16KHZ); ++ break; ++ case 22000: ++ case 22050: ++ MCF_CCM_CDR = MCF_CCM_CDR_SSIDIV(94); ++ codec_write(CODEC_SAMPLE_RATE_REG,CODEC_SAMPLE_22KHZ); ++ break; ++ case 44000: ++ case 44100: ++ MCF_CCM_CDR = MCF_CCM_CDR_SSIDIV(47); ++ codec_write(CODEC_SAMPLE_RATE_REG,CODEC_SAMPLE_44KHZ); ++ break; ++ case 48000: ++ MCF_CCM_CDR = MCF_CCM_CDR_SSIDIV(42); ++ codec_write(CODEC_SAMPLE_RATE_REG,CODEC_SAMPLE_48KHZ); ++ break; ++ default: ++ MCF_CCM_CDR = MCF_CCM_CDR_SSIDIV(47); ++ codec_write(CODEC_SAMPLE_RATE_REG,CODEC_SAMPLE_44KHZ); ++ } ++} ++ ++static void codec_reset(void) ++{ ++ codec_write(CODEC_RESET_REG, 0); /* reset the audio chip */ ++ udelay(1500); /* wait for reset */ ++} ++ ++static void init_audio_codec(void) ++{ ++#ifdef AUDIO_DEBUG ++ printk(DRIVER_NAME ":init_audio_codec()\n"); ++#endif ++ codec_reset(); ++ ++ codec_write(CODEC_LEFT_IN_REG, 0x017); ++ codec_write(CODEC_RIGHT_IN_REG, 0x017); ++ codec_write(CODEC_POWER_DOWN_REG, 0x000); /* Turn off line input */ ++ codec_write(CODEC_DIGITAL_IF_FMT_REG, 0x00A); /* I2S slave mode */ ++ /* codec_write(CODEC_DIGITAL_IF_FMT_REG, 0x042); // I2S master mode */ ++ codec_write(CODEC_DIGITAL_APATH_REG, 0x007); /* Set A path */ ++ ++ /* set sample rate */ ++ adjust_codec_speed(); ++ ++ codec_write(CODEC_LEFT_HP_VOL_REG, 0x075); /* set volume */ ++ codec_write(CODEC_RIGHT_HP_VOL_REG, 0x075); /* set volume */ ++ codec_write(CODEC_DIGITAL_IF_ACT_REG, 1); /* Activate digital interface */ ++ codec_write(CODEC_ANALOG_APATH_REG, 0x0F2); ++} ++ ++ ++static void chip_init(void) ++{ ++#ifdef CONFIG_SSIAUDIO_USE_EDMA ++ init_dma(); ++#endif ++ ++ /* Enable the SSI pins */ ++ MCF_GPIO_PAR_SSI = (0 ++ | MCF_GPIO_PAR_SSI_MCLK ++ | MCF_GPIO_PAR_SSI_STXD(3) ++ | MCF_GPIO_PAR_SSI_SRXD(3) ++ | MCF_GPIO_PAR_SSI_FS(3) ++ | MCF_GPIO_PAR_SSI_BCLK(3) ); ++} ++ ++static void init_ssi(void) ++{ ++#ifdef AUDIO_DEBUG ++ printk(DRIVER_NAME ":init_ssi()\n"); ++#endif ++ ++ /* Dividers are for MCF54445 on 266Mhz, the output is 44.1Khz*/ ++ /* Enable SSI clock in CCM */ ++ MCF_CCM_CDR = MCF_CCM_CDR_SSIDIV(47); ++ ++ /* Issue a SSI reset */ ++ MCF_SSI_CR &= ~MCF_SSI_CR_SSI_EN; /* disable SSI module */ ++ ++ /* SSI module uses internal CPU clock */ ++ MCF_CCM_MISCCR |= MCF_CCM_MISCCR_SSISRC; ++ ++ MCF_CCM_MISCCR |= MCF_CCM_MISCCR_SSIPUE; ++ MCF_CCM_MISCCR |= MCF_CCM_MISCCR_SSIPUS_UP; ++ ++ MCF_SSI_CR = 0 ++ | MCF_SSI_CR_CIS ++ | MCF_SSI_CR_TCH /* Enable two channel mode */ ++ | MCF_SSI_CR_MCE /* Set clock out on SSI_MCLK pin */ ++ | MCF_SSI_CR_I2S_MASTER /* Set I2S master mode */ ++ | MCF_SSI_CR_SYN /* Enable synchronous mode */ ++ | MCF_SSI_CR_NET ++ ; ++ ++ MCF_SSI_TCR = 0 ++ | MCF_SSI_TCR_TXDIR /* internally generated bit clock */ ++ | MCF_SSI_TCR_TFDIR /* internally generated frame sync */ ++ | MCF_SSI_TCR_TSCKP /* Clock data on falling edge of bit clock */ ++ | MCF_SSI_TCR_TFSI /* Frame sync active low */ ++ | MCF_SSI_TCR_TEFS /* TX frame sync 1 bit before data */ ++ | MCF_SSI_TCR_TFEN0 /* TX FIFO 0 enabled */ ++ | MCF_SSI_TCR_TFEN1 /* TX FIFO 1 enabled */ ++ | MCF_SSI_TCR_TXBIT0 ++ ; ++ ++ MCF_SSI_CCR = MCF_SSI_CCR_WL(7) /* 16 bit word length */ ++ | MCF_SSI_CCR_DC(1) /* Frame rate divider */ ++ | MCF_SSI_CCR_PM(0) ++ | MCF_SSI_CCR_DIV2 ++ ; ++ ++ MCF_SSI_FCSR = 0 ++ | MCF_SSI_FCSR_TFWM0(2) ++ | MCF_SSI_FCSR_TFWM1(2) ++ ; ++ ++ MCF_SSI_IER = 0 // interrupts ++#ifndef CONFIG_SSIAUDIO_USE_EDMA ++ | MCF_SSI_IER_TIE /* transmit interrupts */ ++ | MCF_SSI_IER_TFE0 /* transmit FIFO 0 empty */ ++ | MCF_SSI_IER_TFE1 /* transmit FIFO 1 empty */ ++#else ++ | MCF_SSI_IER_TDMAE /* DMA request enabled */ ++ | MCF_SSI_IER_TFE0 /* transmit FIFO 0 empty */ ++ | MCF_SSI_IER_TFE1 /* transmit FIFO 1 empty */ ++#endif ++ ; ++ ++#ifndef CONFIG_SSIAUDIO_USE_EDMA ++ /* enable IRQ: SSI interrupt */ ++ MCF_INTC1_ICR(M5445x_AUDIO_IRQ_SOURCE) = M5445x_AUDIO_IRQ_LEVEL; ++ MCF_INTC1_CIMR = M5445x_AUDIO_IRQ_SOURCE; ++#endif ++} ++ ++#ifndef CONFIG_SSIAUDIO_USE_EDMA ++/* interrupt for SSI */ ++static int ssi_audio_isr(int irq, void *dev_id) ++{ ++ unsigned long *bp; ++ ++ if (audio_txbusy==0) ++ return IRQ_HANDLED; ++ ++ spin_lock(&(audio_device->lock)); ++ ++ if (audio_start == audio_append) { ++ disable_ssi(); ++ audio_txbusy = 0; ++ } else { ++ if (MCF_SSI_ISR & (MCF_SSI_ISR_TFE0|MCF_SSI_ISR_TFE1)) { ++ bp = (unsigned long *) &audio_device->audio_buf[audio_start]; ++ if (audio_device->channel) { ++ MCF_SSI_TX1 = *bp; ++ audio_device->channel = 0; ++ } else { ++ MCF_SSI_TX0 = *bp; ++ audio_device->channel = 1; ++ } ++ audio_start += 4; ++ if (audio_start >= BUFSIZE) ++ audio_start = 0; ++ } ++ } ++ ++ spin_unlock(&(audio_device->lock)); ++ ++ return IRQ_HANDLED; ++} ++#endif ++ ++/* Set initial driver playback defaults. */ ++static void init_driver_variables(void) ++{ ++ audio_device->speed = 44100; ++ audio_device->format = AFMT_S16_LE; ++ audio_device->bits = 16; ++ audio_device->stereo = 1; ++ audio_device->ssi_enabled = 0; ++ ++ audio_start = 0; ++ audio_count = 0; ++ audio_append = 0; ++ audio_appstart = 0; ++ audio_txbusy = 0; ++ audio_device->dmaing = 0; ++} ++ ++/* open audio device */ ++static int ssi_audio_open(struct inode *inode, struct file *filp) ++{ ++#ifdef AUDIO_DEBUG ++ printk(DRIVER_NAME ":ssi_audio_open()\n"); ++#endif ++ ++ if (audio_device==NULL) return (-ENODEV); ++ ++ if (audio_device->isopen) ++ return(-EBUSY); ++ ++ spin_lock(&(audio_device->lock)); ++ ++ audio_device->isopen = 1; ++ ++ init_driver_variables(); ++ init_ssi(); ++ init_audio_codec(); ++ ++ spin_unlock(&(audio_device->lock)); ++ ++ udelay(100); ++ ++ return 0; ++} ++ ++/* close audio device */ ++static int ssi_audio_close(struct inode *inode, struct file *filp) ++{ ++#ifdef AUDIO_DEBUG ++ printk(DRIVER_NAME ":ssi_audio_close()\n"); ++#endif ++ ++ if (audio_device==NULL) return (-ENODEV); ++ ++ ssi_audio_txdrain(); ++ ++ spin_lock(&(audio_device->lock)); ++ ++#ifdef CONFIG_SSIAUDIO_USE_EDMA ++ stop_dma(); ++#endif ++ disable_ssi(); ++ codec_reset(); ++ init_driver_variables(); ++ audio_device->isopen = 0; ++ ++ spin_unlock(&(audio_device->lock)); ++ return 0; ++} ++ ++/* write to audio device */ ++static ssize_t ssi_audio_write(struct file *filp, const char *buf, ++ size_t count, loff_t *ppos) ++{ ++ unsigned long *dp, *buflp; ++ unsigned short *bufwp; ++ unsigned char *bufbp; ++ unsigned int slen, bufcnt, i, s, e; ++ ++#ifdef AUDIO_DEBUG ++ printk(DRIVER_NAME ":ssi_audio_write(buf=%x,count=%d)\n", ++ (int)buf, count); ++#endif ++ ++ if (audio_device==NULL) ++ return (-ENODEV); ++ ++ if (count <= 0) ++ return 0; ++ ++ spin_lock(&(audio_device->lock)); ++ ++ buflp = (unsigned long *) buf; ++ bufwp = (unsigned short *) buf; ++ bufbp = (unsigned char *) buf; ++ ++ bufcnt = count & ~0x3; ++ ++ bufcnt <<= 1; ++ if (audio_device->stereo == 0) ++ bufcnt <<= 1; ++ if (audio_device->bits == 8) ++ bufcnt <<= 1; ++ ++tryagain: ++ /* ++ * Get a snapshot of buffer, so we can figure out how ++ * much data we can fit in... ++ */ ++ s = audio_start; ++ e = audio_append; ++ dp = (unsigned long *) &(audio_device->audio_buf[e]); ++ ++ slen = ((s > e) ? (s - e) : (BUFSIZE - (e - s))) - 4; ++ if (slen > bufcnt) ++ slen = bufcnt; ++ if ((BUFSIZE - e) < slen) ++ slen = BUFSIZE - e; ++ ++ if (slen == 0) { ++ if (signal_pending(current)) ++ return(-ERESTARTSYS); ++ set_current_state(TASK_INTERRUPTIBLE); ++ schedule_timeout(1); ++ goto tryagain; ++ } ++ ++ /* ++ * For DMA we need to have data as 32 bit ++ * values (since SSI TX register is 32 bit). ++ * So, the incoming 16 bit data must be put to buffer as 32 bit values. ++ * Also, the endianess is converted if needed ++ */ ++ if (audio_device->stereo) { ++ if (audio_device->bits == 16) { ++ if (audio_device->format==AFMT_S16_LE) { ++ /*- convert endianess, probably could be done by SSI also */ ++ for (i = 0; (i < slen); i += 4) { ++ unsigned short val = le16_to_cpu((*bufwp++)); ++ *dp++ = val; ++ } ++ } else { ++ for (i = 0; (i < slen); i += 4) { ++ *dp++ = *bufwp++; ++ } ++ } ++ } else { ++ for (i = 0; (i < slen); i += 4) { ++ *dp = (((unsigned long) *bufbp++) << 24); ++ *dp++ |= (((unsigned long) *bufbp++) << 8); ++ } ++ } ++ } else { ++ if (audio_device->bits == 16) { ++ for (i = 0; (i < slen); i += 4) { ++ *dp++ = (((unsigned long)*bufwp)<<16) | *bufwp; ++ bufwp++; ++ } ++ } else { ++ for (i = 0; (i < slen); i += 4) { ++ *dp++ = (((unsigned long) *bufbp) << 24) | ++ (((unsigned long) *bufbp) << 8); ++ bufbp++; ++ } ++ } ++ } ++ ++ e += slen; ++ if (e >= BUFSIZE) ++ e = 0; ++ audio_append = e; ++ ++ /* If not outputing audio, then start now */ ++ if (audio_txbusy == 0) { ++ audio_txbusy++; ++ audio_device->channel = 0; ++ enable_ssi(); ++#ifdef CONFIG_SSIAUDIO_USE_EDMA ++ ssi_audio_dmabuf(); /* start first DMA transfer */ ++#endif ++ } ++ ++ bufcnt -= slen; ++ ++ if (bufcnt > 0) ++ goto tryagain; ++ ++ spin_unlock(&(audio_device->lock)); ++ ++ return count; ++} ++ ++/* ioctl: control the driver */ ++static int ssi_audio_ioctl(struct inode *inode, struct file *filp, ++ unsigned int cmd, unsigned long arg) ++{ ++ long val; ++ int rc = 0; ++ ++#ifdef AUDIO_DEBUG ++ printk(DRIVER_NAME ":ssi_audio_ioctl(cmd=%x,arg=%x)\n", ++ (int)cmd, (int)arg); ++#endif ++ ++ if (audio_device==NULL) ++ return (-ENODEV); ++ ++ switch (cmd) { ++ ++ case SNDCTL_DSP_SPEED: ++ if (access_ok(VERIFY_READ, (void *) arg, sizeof(val))) { ++ get_user(val, (unsigned long *) arg); ++#ifdef AUDIO_DEBUG ++ printk(DRIVER_NAME ":ssi_audio_ioctl: SNDCTL_DSP_SPEED: %ld\n", val); ++#endif ++ ssi_audio_txdrain(); ++ audio_device->speed = val; ++ init_audio_codec(); ++ } else { ++ rc = -EINVAL; ++ } ++ break; ++ ++ case SNDCTL_DSP_SAMPLESIZE: ++ if (access_ok(VERIFY_READ, (void *) arg, sizeof(val))) { ++ get_user(val, (unsigned long *) arg); ++#ifdef AUDIO_DEBUG ++ printk(DRIVER_NAME ":ssi_audio_ioctl: SNDCTL_DSP_SAMPLESIZE: %d\n", val); ++#endif ++ ssi_audio_txdrain(); ++ ssi_audio_setsamplesize(val); ++ } else { ++ rc = -EINVAL; ++ } ++ break; ++ ++ case SNDCTL_DSP_STEREO: ++ if (access_ok(VERIFY_READ, (void *) arg, sizeof(val))) { ++ get_user(val, (unsigned long *) arg); ++ ssi_audio_txdrain(); ++ audio_device->stereo = val; ++ } else { ++ rc = -EINVAL; ++ } ++ break; ++ ++ case SNDCTL_DSP_GETBLKSIZE: ++ if (access_ok(VERIFY_WRITE, (void *) arg, sizeof(long))) ++ put_user(BUFSIZE, (long *) arg); ++ else ++ rc = -EINVAL; ++ break; ++ ++ case SNDCTL_DSP_SYNC: ++ ssi_audio_txdrain(); ++ break; ++ ++ default: ++ rc = -EINVAL; ++ break; ++ } ++ ++ return rc; ++} ++ ++struct file_operations ssi_audio_fops = { ++ open: ssi_audio_open, /* open */ ++ release: ssi_audio_close, /* close */ ++ write: ssi_audio_write, /* write */ ++ ioctl: ssi_audio_ioctl, /* ioctl */ ++}; ++ ++/* initialize audio driver */ ++static int __devinit ssi_audio_probe(struct spi_device *spi) ++{ ++ struct ssi_audio *audio; ++ int err; ++ ++#ifdef AUDIO_DEBUG ++ printk(DRIVER_NAME": probe\n"); ++#endif ++ ++ if (!spi->irq) { ++ dev_dbg(&spi->dev, "no IRQ?\n"); ++ return -ENODEV; ++ } ++ ++ /* don't exceed max specified sample rate */ ++ if (spi->max_speed_hz > MAX_SPEED_HZ) { ++ dev_dbg(&spi->dev, "f(sample) %d KHz?\n", ++ (spi->max_speed_hz)/1000); ++ return -EINVAL; ++ } ++ ++ /* register charcter device */ ++ if (register_chrdev(SOUND_MAJOR, SOUND_DEVICE_NAME, &ssi_audio_fops) < 0) { ++ printk(KERN_WARNING DRIVER_NAME ": failed to register major %d\n", SOUND_MAJOR); ++ dev_dbg(&spi->dev, DRIVER_NAME ": failed to register major %d\n", SOUND_MAJOR); ++ return -ENODEV; ++ } ++ ++ audio = kzalloc(sizeof(struct ssi_audio), GFP_KERNEL); ++ if (!audio) { ++ err = -ENOMEM; ++ goto err_out; ++ } ++ ++ /* DMA buffer must be from GFP_DMA zone, so it will not be cached */ ++ audio->audio_buf = kmalloc(BUFSIZE, GFP_DMA); ++ if (audio->audio_buf == NULL) { ++ dev_dbg(&spi->dev, DRIVER_NAME ": failed to allocate DMA[%d] buffer\n", BUFSIZE); ++ err = -ENOMEM; ++ goto err_free_mem; ++ } ++ ++ audio_device = audio; ++ ++ dev_set_drvdata(&spi->dev, audio); ++ spi->dev.power.power_state = PMSG_ON; ++ ++ audio->spi = spi; ++ ++#ifndef CONFIG_SSIAUDIO_USE_EDMA ++ if (request_irq(spi->irq, ssi_audio_isr, IRQF_DISABLED, spi->dev.bus_id, audio)) { ++ dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq); ++ err = -EBUSY; ++ goto err_free_mem; ++ } ++ ++#else ++ /* request 2 eDMA channels since two channel output mode is used */ ++ if (request_edma_channel(DMA_TCD, ++ ssi_audio_dma_handler_empty, ++ NULL, ++ audio, ++ &(audio_device->lock), ++ DRIVER_NAME)!=0) { ++ dev_dbg(&spi->dev, "DMA channel %d busy?\n", DMA_TCD); ++ err = -EBUSY; ++ goto err_free_mem; ++ } ++ if (request_edma_channel(DMA_TCD2, ++ ssi_audio_dma_handler, ++ NULL, ++ audio, ++ &(audio_device->lock), ++ DRIVER_NAME)!=0) { ++ dev_dbg(&spi->dev, "DMA channel %d busy?\n", DMA_TCD2); ++ err = -EBUSY; ++ goto err_free_mem; ++ } ++ ++#endif ++ chip_init(); ++ printk(DRIVER_NAME ": Probed successfully\n"); ++ ++ return 0; ++ ++ err_free_mem: ++ kfree(audio); ++ audio_device = NULL; ++ err_out: ++ unregister_chrdev(SOUND_MAJOR, SOUND_DEVICE_NAME); ++ return err; ++} ++ ++static int __devexit ssi_audio_remove(struct spi_device *spi) ++{ ++ struct ssi_audio *audio = dev_get_drvdata(&spi->dev); ++ ++ ssi_audio_txdrain(); ++#ifndef CONFIG_SSIAUDIO_USE_EDMA ++ free_irq(spi->irq, audio); ++#else ++ free_edma_channel(DMA_TCD, audio); ++ free_edma_channel(DMA_TCD2, audio); ++#endif ++ kfree(audio->audio_buf); ++ kfree(audio); ++ audio_device = NULL; ++ unregister_chrdev(SOUND_MAJOR, SOUND_DEVICE_NAME); ++ dev_dbg(&spi->dev, "unregistered audio\n"); ++ return 0; ++} ++ ++static int ssi_audio_suspend(struct spi_device *spi, pm_message_t message) ++{ ++ return 0; ++} ++ ++static int ssi_audio_resume(struct spi_device *spi) ++{ ++ return 0; ++} ++ ++static struct spi_driver ssi_audio_driver = { ++ .driver = { ++ .name = DRIVER_NAME, ++ .bus = &spi_bus_type, ++ .owner = THIS_MODULE, ++ }, ++ .probe = ssi_audio_probe, ++ .remove = __devexit_p(ssi_audio_remove), ++ .suspend = ssi_audio_suspend, ++ .resume = ssi_audio_resume, ++}; ++ ++static int __init ssi_audio_init(void) ++{ ++ return spi_register_driver(&ssi_audio_driver); ++} ++module_init(ssi_audio_init); ++ ++static void __exit ssi_audio_exit(void) ++{ ++ spi_unregister_driver(&ssi_audio_driver); ++} ++module_exit(ssi_audio_exit); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Freescale Semiconductor, Inc."); ++MODULE_DESCRIPTION("SSI/I2S Audio Driver"); +--- a/drivers/usb/gadget/ether.c ++++ b/drivers/usb/gadget/ether.c +@@ -287,6 +287,9 @@ MODULE_PARM_DESC(host_addr, "Host Ethern + #define DEV_CONFIG_CDC + #endif + ++#ifdef CONFIG_USB_GADGET_MCF5445X ++#define DEV_CONFIG_CDC ++#endif + + /*-------------------------------------------------------------------------*/ + +--- a/drivers/usb/gadget/fsl_usb2_udc.h ++++ b/drivers/usb/gadget/fsl_usb2_udc.h +@@ -83,16 +83,6 @@ struct usb_dr_host { + u32 endptctrl[6]; /* Endpoint Control Registers */ + }; + +- /* non-EHCI USB system interface registers (Big Endian) */ +-struct usb_sys_interface { +- u32 snoop1; +- u32 snoop2; +- u32 age_cnt_thresh; /* Age Count Threshold Register */ +- u32 pri_ctrl; /* Priority Control Register */ +- u32 si_ctrl; /* System Interface Control Register */ +- u8 res[236]; +- u32 control; /* General Purpose Control Register */ +-}; + + /* ep0 transfer state */ + #define WAIT_FOR_SETUP 0 +@@ -101,10 +91,6 @@ struct usb_sys_interface { + #define WAIT_FOR_OUT_STATUS 3 + #define DATA_STATE_RECV 4 + +-/* Device Controller Capability Parameter register */ +-#define DCCPARAMS_DC 0x00000080 +-#define DCCPARAMS_DEN_MASK 0x0000001f +- + /* Frame Index Register Bit Masks */ + #define USB_FRINDEX_MASKS 0x3fff + /* USB CMD Register Bit Masks */ +@@ -180,172 +166,6 @@ struct usb_sys_interface { + /* endpoint list address bit masks */ + #define USB_EP_LIST_ADDRESS_MASK 0xfffff800 + +-/* PORTSCX Register Bit Masks */ +-#define PORTSCX_CURRENT_CONNECT_STATUS 0x00000001 +-#define PORTSCX_CONNECT_STATUS_CHANGE 0x00000002 +-#define PORTSCX_PORT_ENABLE 0x00000004 +-#define PORTSCX_PORT_EN_DIS_CHANGE 0x00000008 +-#define PORTSCX_OVER_CURRENT_ACT 0x00000010 +-#define PORTSCX_OVER_CURRENT_CHG 0x00000020 +-#define PORTSCX_PORT_FORCE_RESUME 0x00000040 +-#define PORTSCX_PORT_SUSPEND 0x00000080 +-#define PORTSCX_PORT_RESET 0x00000100 +-#define PORTSCX_LINE_STATUS_BITS 0x00000C00 +-#define PORTSCX_PORT_POWER 0x00001000 +-#define PORTSCX_PORT_INDICTOR_CTRL 0x0000C000 +-#define PORTSCX_PORT_TEST_CTRL 0x000F0000 +-#define PORTSCX_WAKE_ON_CONNECT_EN 0x00100000 +-#define PORTSCX_WAKE_ON_CONNECT_DIS 0x00200000 +-#define PORTSCX_WAKE_ON_OVER_CURRENT 0x00400000 +-#define PORTSCX_PHY_LOW_POWER_SPD 0x00800000 +-#define PORTSCX_PORT_FORCE_FULL_SPEED 0x01000000 +-#define PORTSCX_PORT_SPEED_MASK 0x0C000000 +-#define PORTSCX_PORT_WIDTH 0x10000000 +-#define PORTSCX_PHY_TYPE_SEL 0xC0000000 +- +-/* bit 11-10 are line status */ +-#define PORTSCX_LINE_STATUS_SE0 0x00000000 +-#define PORTSCX_LINE_STATUS_JSTATE 0x00000400 +-#define PORTSCX_LINE_STATUS_KSTATE 0x00000800 +-#define PORTSCX_LINE_STATUS_UNDEF 0x00000C00 +-#define PORTSCX_LINE_STATUS_BIT_POS 10 +- +-/* bit 15-14 are port indicator control */ +-#define PORTSCX_PIC_OFF 0x00000000 +-#define PORTSCX_PIC_AMBER 0x00004000 +-#define PORTSCX_PIC_GREEN 0x00008000 +-#define PORTSCX_PIC_UNDEF 0x0000C000 +-#define PORTSCX_PIC_BIT_POS 14 +- +-/* bit 19-16 are port test control */ +-#define PORTSCX_PTC_DISABLE 0x00000000 +-#define PORTSCX_PTC_JSTATE 0x00010000 +-#define PORTSCX_PTC_KSTATE 0x00020000 +-#define PORTSCX_PTC_SEQNAK 0x00030000 +-#define PORTSCX_PTC_PACKET 0x00040000 +-#define PORTSCX_PTC_FORCE_EN 0x00050000 +-#define PORTSCX_PTC_BIT_POS 16 +- +-/* bit 27-26 are port speed */ +-#define PORTSCX_PORT_SPEED_FULL 0x00000000 +-#define PORTSCX_PORT_SPEED_LOW 0x04000000 +-#define PORTSCX_PORT_SPEED_HIGH 0x08000000 +-#define PORTSCX_PORT_SPEED_UNDEF 0x0C000000 +-#define PORTSCX_SPEED_BIT_POS 26 +- +-/* bit 28 is parallel transceiver width for UTMI interface */ +-#define PORTSCX_PTW 0x10000000 +-#define PORTSCX_PTW_8BIT 0x00000000 +-#define PORTSCX_PTW_16BIT 0x10000000 +- +-/* bit 31-30 are port transceiver select */ +-#define PORTSCX_PTS_UTMI 0x00000000 +-#define PORTSCX_PTS_ULPI 0x80000000 +-#define PORTSCX_PTS_FSLS 0xC0000000 +-#define PORTSCX_PTS_BIT_POS 30 +- +-/* otgsc Register Bit Masks */ +-#define OTGSC_CTRL_VUSB_DISCHARGE 0x00000001 +-#define OTGSC_CTRL_VUSB_CHARGE 0x00000002 +-#define OTGSC_CTRL_OTG_TERM 0x00000008 +-#define OTGSC_CTRL_DATA_PULSING 0x00000010 +-#define OTGSC_STS_USB_ID 0x00000100 +-#define OTGSC_STS_A_VBUS_VALID 0x00000200 +-#define OTGSC_STS_A_SESSION_VALID 0x00000400 +-#define OTGSC_STS_B_SESSION_VALID 0x00000800 +-#define OTGSC_STS_B_SESSION_END 0x00001000 +-#define OTGSC_STS_1MS_TOGGLE 0x00002000 +-#define OTGSC_STS_DATA_PULSING 0x00004000 +-#define OTGSC_INTSTS_USB_ID 0x00010000 +-#define OTGSC_INTSTS_A_VBUS_VALID 0x00020000 +-#define OTGSC_INTSTS_A_SESSION_VALID 0x00040000 +-#define OTGSC_INTSTS_B_SESSION_VALID 0x00080000 +-#define OTGSC_INTSTS_B_SESSION_END 0x00100000 +-#define OTGSC_INTSTS_1MS 0x00200000 +-#define OTGSC_INTSTS_DATA_PULSING 0x00400000 +-#define OTGSC_INTR_USB_ID 0x01000000 +-#define OTGSC_INTR_A_VBUS_VALID 0x02000000 +-#define OTGSC_INTR_A_SESSION_VALID 0x04000000 +-#define OTGSC_INTR_B_SESSION_VALID 0x08000000 +-#define OTGSC_INTR_B_SESSION_END 0x10000000 +-#define OTGSC_INTR_1MS_TIMER 0x20000000 +-#define OTGSC_INTR_DATA_PULSING 0x40000000 +- +-/* USB MODE Register Bit Masks */ +-#define USB_MODE_CTRL_MODE_IDLE 0x00000000 +-#define USB_MODE_CTRL_MODE_DEVICE 0x00000002 +-#define USB_MODE_CTRL_MODE_HOST 0x00000003 +-#define USB_MODE_CTRL_MODE_RSV 0x00000001 +-#define USB_MODE_SETUP_LOCK_OFF 0x00000008 +-#define USB_MODE_STREAM_DISABLE 0x00000010 +-/* Endpoint Flush Register */ +-#define EPFLUSH_TX_OFFSET 0x00010000 +-#define EPFLUSH_RX_OFFSET 0x00000000 +- +-/* Endpoint Setup Status bit masks */ +-#define EP_SETUP_STATUS_MASK 0x0000003F +-#define EP_SETUP_STATUS_EP0 0x00000001 +- +-/* ENDPOINTCTRLx Register Bit Masks */ +-#define EPCTRL_TX_ENABLE 0x00800000 +-#define EPCTRL_TX_DATA_TOGGLE_RST 0x00400000 /* Not EP0 */ +-#define EPCTRL_TX_DATA_TOGGLE_INH 0x00200000 /* Not EP0 */ +-#define EPCTRL_TX_TYPE 0x000C0000 +-#define EPCTRL_TX_DATA_SOURCE 0x00020000 /* Not EP0 */ +-#define EPCTRL_TX_EP_STALL 0x00010000 +-#define EPCTRL_RX_ENABLE 0x00000080 +-#define EPCTRL_RX_DATA_TOGGLE_RST 0x00000040 /* Not EP0 */ +-#define EPCTRL_RX_DATA_TOGGLE_INH 0x00000020 /* Not EP0 */ +-#define EPCTRL_RX_TYPE 0x0000000C +-#define EPCTRL_RX_DATA_SINK 0x00000002 /* Not EP0 */ +-#define EPCTRL_RX_EP_STALL 0x00000001 +- +-/* bit 19-18 and 3-2 are endpoint type */ +-#define EPCTRL_EP_TYPE_CONTROL 0 +-#define EPCTRL_EP_TYPE_ISO 1 +-#define EPCTRL_EP_TYPE_BULK 2 +-#define EPCTRL_EP_TYPE_INTERRUPT 3 +-#define EPCTRL_TX_EP_TYPE_SHIFT 18 +-#define EPCTRL_RX_EP_TYPE_SHIFT 2 +- +-/* SNOOPn Register Bit Masks */ +-#define SNOOP_ADDRESS_MASK 0xFFFFF000 +-#define SNOOP_SIZE_ZERO 0x00 /* snooping disable */ +-#define SNOOP_SIZE_4KB 0x0B /* 4KB snoop size */ +-#define SNOOP_SIZE_8KB 0x0C +-#define SNOOP_SIZE_16KB 0x0D +-#define SNOOP_SIZE_32KB 0x0E +-#define SNOOP_SIZE_64KB 0x0F +-#define SNOOP_SIZE_128KB 0x10 +-#define SNOOP_SIZE_256KB 0x11 +-#define SNOOP_SIZE_512KB 0x12 +-#define SNOOP_SIZE_1MB 0x13 +-#define SNOOP_SIZE_2MB 0x14 +-#define SNOOP_SIZE_4MB 0x15 +-#define SNOOP_SIZE_8MB 0x16 +-#define SNOOP_SIZE_16MB 0x17 +-#define SNOOP_SIZE_32MB 0x18 +-#define SNOOP_SIZE_64MB 0x19 +-#define SNOOP_SIZE_128MB 0x1A +-#define SNOOP_SIZE_256MB 0x1B +-#define SNOOP_SIZE_512MB 0x1C +-#define SNOOP_SIZE_1GB 0x1D +-#define SNOOP_SIZE_2GB 0x1E /* 2GB snoop size */ +- +-/* pri_ctrl Register Bit Masks */ +-#define PRI_CTRL_PRI_LVL1 0x0000000C +-#define PRI_CTRL_PRI_LVL0 0x00000003 +- +-/* si_ctrl Register Bit Masks */ +-#define SI_CTRL_ERR_DISABLE 0x00000010 +-#define SI_CTRL_IDRC_DISABLE 0x00000008 +-#define SI_CTRL_RD_SAFE_EN 0x00000004 +-#define SI_CTRL_RD_PREFETCH_DISABLE 0x00000002 +-#define SI_CTRL_RD_PREFEFETCH_VAL 0x00000001 +- +-/* control Register Bit Masks */ +-#define USB_CTRL_IOENB 0x00000004 +-#define USB_CTRL_ULPI_INT0EN 0x00000001 + + /* Endpoint Queue Head data struct + * Rem: all the variables of qh are LittleEndian Mode +@@ -477,7 +297,10 @@ struct fsl_udc { + unsigned int irq; + + struct usb_ctrlrequest local_setup_buff; +- spinlock_t lock; ++ spinlock_t lock; /* udc lock */ ++ struct fsl_usb2_platform_data *pdata; ++ u32 xcvr_type; ++ + struct otg_transceiver *transceiver; + unsigned softconnect:1; + unsigned vbus_active:1; +@@ -514,7 +337,7 @@ struct fsl_udc { + #define DBG(fmt, args...) printk(KERN_DEBUG "[%s] " fmt "\n", \ + __FUNCTION__, ## args) + #else +-#define DBG(fmt, args...) do{}while(0) ++#define DBG(fmt, args...) do {} while (0) + #endif + + #if 0 +@@ -548,7 +371,7 @@ static void dump_msg(const char *label, + #ifdef VERBOSE + #define VDBG DBG + #else +-#define VDBG(stuff...) do{}while(0) ++#define VDBG(stuff...) do {} while (0) + #endif + + #define ERR(stuff...) pr_err("udc: " stuff) +@@ -573,11 +396,14 @@ static void dump_msg(const char *label, + #define ep_maxpacket(EP) ((EP)->ep.maxpacket) + #define ep_is_in(EP) ( (ep_index(EP) == 0) ? (EP->udc->ep0_dir == \ + USB_DIR_IN ):((EP)->desc->bEndpointAddress \ +- & USB_DIR_IN)==USB_DIR_IN) ++ & USB_DIR_IN) == USB_DIR_IN) + #define get_ep_by_pipe(udc, pipe) ((pipe == 1)? &udc->eps[0]: \ + &udc->eps[pipe]) + #define get_pipe_by_windex(windex) ((windex & USB_ENDPOINT_NUMBER_MASK) \ + * 2 + ((windex & USB_DIR_IN) ? 1 : 0)) + #define get_pipe_by_ep(EP) (ep_index(EP) * 2 + ep_is_in(EP)) + ++/* Bulk only class request */ ++#define USB_BULK_RESET_REQUEST 0xff ++ + #endif +--- a/drivers/usb/gadget/gadget_chips.h ++++ b/drivers/usb/gadget/gadget_chips.h +@@ -147,6 +147,11 @@ + #define gadget_is_m66592(g) 0 + #endif + ++#ifdef CONFIG_USB_GADGET_MCF5445X ++#define gadget_is_mcf5445x(g) !strcmp("fsl-usb2-udc", (g)->name) ++#else ++#define gadget_is_mcf5445x(g) 0 ++#endif + + // CONFIG_USB_GADGET_SX2 + // CONFIG_USB_GADGET_AU1X00 +@@ -212,5 +217,7 @@ static inline int usb_gadget_controller_ + return 0x20; + else if (gadget_is_m66592(gadget)) + return 0x21; ++ else if (gadget_is_mcf5445x(gadget)) ++ return 0x22; + return -ENOENT; + } +--- a/drivers/usb/gadget/Kconfig ++++ b/drivers/usb/gadget/Kconfig +@@ -231,6 +231,26 @@ config SUPERH_BUILT_IN_M66592 + However, this problem is improved if change a value of + NET_IP_ALIGN to 4. + ++config USB_GADGET_MCF5445X ++ boolean "MCF5445X USB Device Controller" ++ depends on M54455 && USB_M5445X_ULPI ++ select USB_GADGET_DUALSPEED ++ help ++ Freescale's MCF5445X processors include ++ an integrated device controller (as part of the OTG module). ++ It has four programmable, bidirectional endpoints, ++ including endpoint 0. ++ ++ Say "y" to link the driver statically, or "m" to build a ++ dynamically linked module called "mcf5445_udc" and force all ++ gadget drivers to also be dynamically linked. ++ ++config USB_MCF5445X ++ tristate ++ depends on USB_GADGET_MCF5445X ++ default USB_GADGET ++ select USB_GADGET_SELECTED ++ + config USB_GADGET_GOKU + boolean "Toshiba TC86C001 'Goku-S'" + depends on PCI +@@ -285,17 +305,6 @@ config USB_OMAP + default USB_GADGET + select USB_GADGET_SELECTED + +-config USB_OTG +- boolean "OTG Support" +- depends on USB_GADGET_OMAP && ARCH_OMAP_OTG && USB_OHCI_HCD +- help +- The most notable feature of USB OTG is support for a +- "Dual-Role" device, which can act as either a device +- or a host. The initial role choice can be changed +- later, when two dual-role devices talk to each other. +- +- Select this only if your OMAP board has a Mini-AB connector. +- + config USB_GADGET_S3C2410 + boolean "S3C2410 USB Device Controller" + depends on ARCH_S3C2410 +@@ -369,6 +378,18 @@ config USB_DUMMY_HCD + + endchoice + ++config USB_OTG ++ boolean "OTG Support" ++ depends on (USB_GADGET_OMAP && ARCH_OMAP_OTG && USB_OHCI_HCD) || \ ++ (USB_GADGET_MCF5445X && USB_M5445X_ULPI) ++ help ++ The most notable feature of USB OTG is support for a ++ "Dual-Role" device, which can act as either a device ++ or a host. The initial role choice can be changed ++ later, when two dual-role devices talk to each other. ++ ++ Select this only if your OMAP board has a Mini-AB connector. ++ + config USB_GADGET_DUALSPEED + bool + depends on USB_GADGET +--- a/drivers/usb/gadget/Makefile ++++ b/drivers/usb/gadget/Makefile +@@ -17,6 +17,7 @@ obj-$(CONFIG_USB_AT91) += at91_udc.o + obj-$(CONFIG_USB_ATMEL_USBA) += atmel_usba_udc.o + obj-$(CONFIG_USB_FSL_USB2) += fsl_usb2_udc.o + obj-$(CONFIG_USB_M66592) += m66592-udc.o ++obj-$(CONFIG_USB_MCF5445X) += mcf5445x_udc.o + + # + # USB gadget drivers +--- /dev/null ++++ b/drivers/usb/gadget/mcf5445x_udc.c +@@ -0,0 +1,2745 @@ ++/* ++ * Copyright Freescale Semiconductor, Inc. 2006-2007 ++ * ++ * Based on mpc_udc.c code ++ * of Li Yang and Jiang Bo (Freescale Semiconductor, Inc.) ++ * ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ * ++ *************************************************************************** ++ * Changes: ++ * v0.004 30 July 2007 Duck ++ * mcf5445x port ++ * v0.003 27 October 2006 Andrey Butok ++ * Added M5329EVB support (without external transceiver). ++ * v0.002 29 September 2006 Andrey Butok ++ * Some little changes. Added OTG support. ++ * v0.001 12 July 2006 Andrey Butok ++ * Initial Release - developed on uClinux with 2.6.17.1 kernel. ++ * Based on mpc_udc.c code ++ * of Li Yang and Jiang Bo (Freescale Semiconductor, Inc.) ++ * ++ */ ++ ++#undef DEBUG ++#undef VERBOSE ++ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/ioport.h> ++#include <linux/types.h> ++#include <linux/errno.h> ++#include <linux/delay.h> ++#include <linux/sched.h> ++#include <linux/slab.h> ++#include <linux/init.h> ++#include <linux/io.h> ++#include <linux/irq.h> ++#include <linux/timer.h> ++#include <linux/list.h> ++#include <linux/interrupt.h> ++#include <linux/proc_fs.h> ++#include <linux/mm.h> ++#include <linux/platform_device.h> ++#include <linux/moduleparam.h> ++#include <linux/device.h> ++#include <linux/usb/ch9.h> ++#include <linux/usb/gadget.h> ++#include <linux/usb/otg.h> ++#include <linux/dma-mapping.h> ++#include <linux/dmapool.h> ++#include <linux/fsl_devices.h> ++#include <linux/usb/fsl_xcvr.h> ++#include <linux/usb/fsl_usb2.h> ++#include <linux/pm.h> ++ ++#include <asm/byteorder.h> ++#include <asm/system.h> ++#include <asm/unaligned.h> ++#include <asm/dma.h> ++ ++#include <asm/mcfsim.h> ++#include <asm/cacheflush.h> ++ ++#include "fsl_usb2_udc.h" ++ ++#define DRIVER_DESC "Freescale High-Speed USB SoC Device Controller driver" ++#define DRIVER_AUTHOR "Freescale Semiconductor Inc." ++#define DRIVER_VERSION "30 July 2007" ++ ++#define cpu_to_hc32(x) (x) ++#define hc32_to_cpu(x) (x) ++ ++static int udc_suspend(struct fsl_udc *udc); ++ ++#define DMA_ADDR_INVALID (~(dma_addr_t)0) ++ ++static const char driver_name[] = "fsl-usb2-udc"; ++static const char driver_desc[] = DRIVER_DESC; ++ ++volatile static struct fsl_usb_device_regs *dr_regs; ++volatile static struct usb_sys_interface *usb_sys_regs; ++ ++/* it is initialized in probe() */ ++static struct fsl_udc *udc_controller; ++ ++static const struct usb_endpoint_descriptor ++fsl_ep0_desc = { ++ .bLength = USB_DT_ENDPOINT_SIZE, ++ .bDescriptorType = USB_DT_ENDPOINT, ++ .bEndpointAddress = 0, ++ .bmAttributes = USB_ENDPOINT_XFER_CONTROL, ++ .wMaxPacketSize = USB_MAX_CTRL_PAYLOAD, ++}; ++ ++static int fsl_udc_suspend(struct device *dev, pm_message_t state); ++static int fsl_udc_resume(struct device *dev); ++static void fsl_ep_fifo_flush(struct usb_ep *_ep); ++ ++/******************************************************************** ++ * Internal Used Function ++********************************************************************/ ++/*----------------------------------------------------------------- ++ * done() - retire a request; caller blocked irqs ++ * @status : request status to be set, only works when ++ * request is still in progress. ++ *--------------------------------------------------------------*/ ++static void done(struct fsl_ep *ep, struct fsl_req *req, int status) ++{ ++ struct fsl_udc *udc = NULL; ++ unsigned char stopped = ep->stopped; ++ ++ udc = (struct fsl_udc *)ep->udc; ++ ++ pr_debug("udc: req=0x%p\n", req); ++ if (req->head) { ++ pr_debug("udc: freeing head=0x%p\n", req->head); ++ dma_pool_free(udc->td_pool, req->head, req->head->td_dma); ++ } ++ ++ /* the req->queue pointer is used by ep_queue() func, in which ++ * the request will be added into a udc_ep->queue 'd tail ++ * so here the req will be dropped from the ep->queue ++ */ ++ list_del_init(&req->queue); ++ ++ /* req.status should be set as -EINPROGRESS in ep_queue() */ ++ if (req->req.status == -EINPROGRESS) ++ req->req.status = status; ++ else ++ status = req->req.status; ++ ++ pr_debug("udc: req=0x%p mapped=%x\n", req, req->mapped); ++ ++ if (req->mapped) { ++ pr_debug("udc: calling dma_unmap_single(buf,%s) req=0x%p " ++ "a=0x%x len=%d\n", ++ ep_is_in(ep) ? "to_dvc" : "from_dvc", ++ req, req->req.dma, req->req.length); ++ ++ dma_unmap_single(ep->udc->gadget.dev.parent, ++ req->req.dma, req->req.length, ep_is_in(ep) ? ++ DMA_TO_DEVICE : DMA_FROM_DEVICE); ++ ++ req->req.dma = DMA_ADDR_INVALID; ++ req->mapped = 0; ++ pr_debug("udc: req=0x%p set req.dma=0x%x\n", req, req->req.dma); ++ } else { ++ if ((req->req.length != 0) ++ && (req->req.dma != DMA_ADDR_INVALID)) { ++ pr_debug("udc: calling dma_sync_single_for_cpu(buf,%s) " ++ "req=0x%p dma=0x%x len=%d\n", ++ ep_is_in(ep) ? "to_dvc" : "from_dvc", req, ++ req->req.dma, req->req.length); ++ ++ dma_sync_single_for_cpu(ep->udc->gadget.dev.parent, ++ req->req.dma, req->req.length, ++ ep_is_in(ep) ? DMA_TO_DEVICE : ++ DMA_FROM_DEVICE); ++ } ++ } ++ ++ if (status && (status != -ESHUTDOWN)) { ++ pr_debug("udc: complete %s req 0c%p stat %d len %u/%u\n", ++ ep->ep.name, &req->req, status, ++ req->req.actual, req->req.length); ++ } ++ ++ /* don't modify queue heads during completion callback */ ++ ep->stopped = 1; ++ ++ spin_unlock(&ep->udc->lock); ++ ++ /* this complete() should a func implemented by gadget layer, ++ * eg fsg->bulk_in_complete() */ ++ if (req->req.complete) { ++ pr_debug("udc: calling gadget's complete() req=0x%p\n", req); ++ req->req.complete(&ep->ep, &req->req); ++ pr_debug("udc: back from gadget's complete()\n"); ++ } ++ ++ spin_lock(&ep->udc->lock); ++ ep->stopped = stopped; ++} ++ ++/* ++ * nuke(): delete all requests related to this ep ++ * called with spinlock held ++ *--------------------------------------------------------------*/ ++static void nuke(struct fsl_ep *ep, int status) ++{ ++ ep->stopped = 1; ++ ++ /* Flush fifo */ ++ fsl_ep_fifo_flush(&ep->ep); ++ ++ /* Whether this eq has request linked */ ++ while (!list_empty(&ep->queue)) { ++ struct fsl_req *req = NULL; ++ ++ req = list_entry(ep->queue.next, struct fsl_req, queue); ++ done(ep, req, status); ++ } ++} ++ ++/*------------------------------------------------------------------ ++ Internal Hardware related function ++ ------------------------------------------------------------------*/ ++ ++static int dr_controller_setup(struct fsl_udc *udc) ++{ ++ unsigned int tmp; ++ unsigned int __attribute((unused)) ctrl = 0; ++ unsigned long timeout; ++ struct fsl_usb2_platform_data *pdata; ++ ++#define FSL_UDC_RESET_TIMEOUT 1000 ++ ++ /* before here, make sure dr_regs has been initialized */ ++ if (!udc) ++ return -EINVAL; ++ pdata = udc->pdata; ++ ++ /* Stop and reset the usb controller */ ++ tmp = fsl_readl(&dr_regs->usbcmd); ++ tmp &= ~USB_CMD_RUN_STOP; ++ fsl_writel(tmp, &dr_regs->usbcmd); ++ ++ tmp = fsl_readl(&dr_regs->usbcmd); ++ tmp |= USB_CMD_CTRL_RESET; ++ fsl_writel(tmp, &dr_regs->usbcmd); ++ ++ /* Wait for reset to complete */ ++ timeout = jiffies + FSL_UDC_RESET_TIMEOUT; ++ while (fsl_readl(&dr_regs->usbcmd) & USB_CMD_CTRL_RESET) { ++ if (time_after(jiffies, timeout)) { ++ ERR("udc reset timeout! \n"); ++ return -ETIMEDOUT; ++ } ++ cpu_relax(); ++ } ++ ++ tmp = fsl_readl(&dr_regs->usbmode); ++ tmp &= ~0x3; /* clear mode bits */ ++ tmp |= USB_MODE_CTRL_MODE_DEVICE; ++ /* Disable Setup Lockout */ ++ tmp |= USB_MODE_SETUP_LOCK_OFF; ++ if (pdata->es) ++ tmp |= USBMODE_ES; ++ fsl_writel(tmp, &dr_regs->usbmode); ++ ++ if (pdata->xcvr_ops && pdata->xcvr_ops->set_device) ++ pdata->xcvr_ops->set_device(); ++ ++ /* Clear the setup status */ ++ fsl_writel(0, &dr_regs->usbsts); ++ ++ tmp = udc->ep_qh_dma; ++ tmp &= USB_EP_LIST_ADDRESS_MASK; ++ fsl_writel(tmp, &dr_regs->endpointlistaddr); ++ ++ /* ++ VDBG("vir[qh_base] is %p phy[qh_base] is 0x%8x reg is 0x%8x", ++ (int)udc->ep_qh, (int)tmp, ++ fsl_readl(&dr_regs->endpointlistaddr)); ++ */ ++ ++ ++ if (pdata->have_sysif_regs) { ++ /* Config control enable i/o output, cpu endian register */ ++ ctrl = __raw_readl(&usb_sys_regs->control); ++ ctrl |= USB_CTRL_IOENB; ++ __raw_writel(ctrl, &usb_sys_regs->control); ++ } ++ ++#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) ++ /* Turn on cache snooping hardware, since some PowerPC platforms ++ * wholly rely on hardware to deal with cache coherent. */ ++ ++ if (pdata->have_sysif_regs) { ++ /* Setup Snooping for all the 4GB space */ ++ tmp = SNOOP_SIZE_2GB; /* starts from 0x0, size 2G */ ++ __raw_writel(tmp, &usb_sys_regs->snoop1); ++ tmp |= 0x80000000; /* starts from 0x8000000, size 2G */ ++ __raw_writel(tmp, &usb_sys_regs->snoop2); ++ } ++#endif ++ ++ return 0; ++} ++ ++static void pullup_enable(struct fsl_udc *udc) ++{ ++ u32 temp; ++ ++ unsigned short ccm = fsl_readw(&MCF_CCM_UOCSR); ++ ccm |= MCF_CCM_UOCSR_BVLD; ++ ccm &= ~MCF_CCM_UOCSR_SEND; ++ fsl_writew(ccm, &MCF_CCM_UOCSR); ++ ++ /* Enable DR irq reg */ ++ temp = USB_INTR_INT_EN | USB_INTR_ERR_INT_EN ++ | USB_INTR_PTC_DETECT_EN | USB_INTR_RESET_EN ++ | USB_INTR_DEVICE_SUSPEND | USB_INTR_SYS_ERR_EN; ++ ++ fsl_writel(temp, &dr_regs->usbintr); ++ ++ /* Set controller to Run */ ++ temp = fsl_readl(&dr_regs->usbcmd); ++ temp |= USB_CMD_RUN_STOP; ++ fsl_writel(temp, &dr_regs->usbcmd); ++} ++ ++static void pullup_disable(struct fsl_udc *udc) ++{ ++ unsigned int tmp; ++ unsigned short ccm; ++ ++ VDBG(); ++ /* disable all INTRs */ ++ fsl_writel(0, &dr_regs->usbintr); ++ ++ ccm = fsl_readw(&MCF_CCM_UOCSR); ++ ccm &= ~MCF_CCM_UOCSR_BVLD; ++ fsl_writew(ccm, &MCF_CCM_UOCSR); ++ ++ /* set controller to Stop */ ++ tmp = fsl_readl(&dr_regs->usbcmd); ++ tmp &= ~USB_CMD_RUN_STOP; ++ fsl_writel(tmp, &dr_regs->usbcmd); ++} ++ ++static void dr_controller_run(struct fsl_udc *udc) ++{ ++ VDBG(); ++ pullup_enable(udc); ++ udc->stopped = 0; ++} ++ ++static void dr_controller_stop(struct fsl_udc *udc) ++{ ++ pullup_disable(udc); ++ udc->stopped = 1; ++ udc->gadget.b_hnp_enable = 0; ++ udc->gadget.a_hnp_support = 0; ++ udc->gadget.a_alt_hnp_support = 0; ++} ++ ++void dr_ep_setup(unsigned char ep_num, unsigned char dir, unsigned char ep_type) ++{ ++ unsigned int tmp_epctrl = 0; ++ ++ tmp_epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]); ++ if (dir) { ++ if (ep_num) ++ tmp_epctrl |= EPCTRL_TX_DATA_TOGGLE_RST; ++ tmp_epctrl |= EPCTRL_TX_ENABLE; ++ tmp_epctrl |= ((unsigned int)(ep_type) ++ << EPCTRL_TX_EP_TYPE_SHIFT); ++ } else { ++ if (ep_num) ++ tmp_epctrl |= EPCTRL_RX_DATA_TOGGLE_RST; ++ tmp_epctrl |= EPCTRL_RX_ENABLE; ++ tmp_epctrl |= ((unsigned int)(ep_type) ++ << EPCTRL_RX_EP_TYPE_SHIFT); ++ } ++ ++ fsl_writel(tmp_epctrl, &dr_regs->endptctrl[ep_num]); ++} ++ ++static void dr_ep_change_stall(unsigned char ep_num, unsigned char dir, ++ int value) ++{ ++ u32 tmp_epctrl = 0; ++ ++ tmp_epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]); ++ ++ if (value) { ++ /* set the stall bit */ ++ if (dir) ++ tmp_epctrl |= EPCTRL_TX_EP_STALL; ++ else ++ tmp_epctrl |= EPCTRL_RX_EP_STALL; ++ } else { ++ /* clear the stall bit and reset data toggle */ ++ if (dir) { ++ tmp_epctrl &= ~EPCTRL_TX_EP_STALL; ++ tmp_epctrl |= EPCTRL_TX_DATA_TOGGLE_RST; ++ } else { ++ tmp_epctrl &= ~EPCTRL_RX_EP_STALL; ++ tmp_epctrl |= EPCTRL_RX_DATA_TOGGLE_RST; ++ } ++ } ++ fsl_writel(tmp_epctrl, &dr_regs->endptctrl[ep_num]); ++} ++ ++/* Get stall status of a specific ep ++ Return: 0: not stalled; 1:stalled */ ++static int dr_ep_get_stall(unsigned char ep_num, unsigned char dir) ++{ ++ u32 epctrl; ++ ++ epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]); ++ if (dir) ++ return (epctrl & EPCTRL_TX_EP_STALL) ? 1 : 0; ++ else ++ return (epctrl & EPCTRL_RX_EP_STALL) ? 1 : 0; ++} ++ ++/******************************************************************** ++ Internal Structure Build up functions ++********************************************************************/ ++ ++/*------------------------------------------------------------------ ++* struct_ep_qh_setup(): set the Endpoint Capabilites field of QH ++ * @zlt: Zero Length Termination Select (1: disable; 0: enable) ++ * @mult: Mult field ++ ------------------------------------------------------------------*/ ++static void struct_ep_qh_setup(struct fsl_udc *udc, unsigned char ep_num, ++ unsigned char dir, unsigned char ep_type, ++ unsigned int max_pkt_len, ++ unsigned int zlt, unsigned char mult) ++{ ++ struct ep_queue_head *p_QH = &udc->ep_qh[2 * ep_num + dir]; ++ unsigned int tmp = 0; ++ ++ /* set the Endpoint Capabilites in QH */ ++ switch (ep_type) { ++ case USB_ENDPOINT_XFER_CONTROL: ++ /* Interrupt On Setup (IOS). for control ep */ ++ tmp = (max_pkt_len << EP_QUEUE_HEAD_MAX_PKT_LEN_POS) ++ | EP_QUEUE_HEAD_IOS; ++ break; ++ case USB_ENDPOINT_XFER_ISOC: ++ tmp = (max_pkt_len << EP_QUEUE_HEAD_MAX_PKT_LEN_POS) ++ | (mult << EP_QUEUE_HEAD_MULT_POS); ++ break; ++ case USB_ENDPOINT_XFER_BULK: ++ case USB_ENDPOINT_XFER_INT: ++ tmp = max_pkt_len << EP_QUEUE_HEAD_MAX_PKT_LEN_POS; ++ break; ++ default: ++ VDBG("error ep type is %d", ep_type); ++ return; ++ } ++ if (zlt) ++ tmp |= EP_QUEUE_HEAD_ZLT_SEL; ++ p_QH->max_pkt_length = cpu_to_hc32(tmp); ++ ++ return; ++} ++ ++/* Setup qh structure and ep register for ep0. */ ++static void ep0_setup(struct fsl_udc *udc) ++{ ++ /* the intialization of an ep includes: fields in QH, Regs, ++ * fsl_ep struct */ ++ struct_ep_qh_setup(udc, 0, USB_RECV, USB_ENDPOINT_XFER_CONTROL, ++ USB_MAX_CTRL_PAYLOAD, 0, 0); ++ struct_ep_qh_setup(udc, 0, USB_SEND, USB_ENDPOINT_XFER_CONTROL, ++ USB_MAX_CTRL_PAYLOAD, 0, 0); ++ dr_ep_setup(0, USB_RECV, USB_ENDPOINT_XFER_CONTROL); ++ dr_ep_setup(0, USB_SEND, USB_ENDPOINT_XFER_CONTROL); ++ ++ return; ++ ++} ++ ++/*********************************************************************** ++ Endpoint Management Functions ++***********************************************************************/ ++ ++/*------------------------------------------------------------------------- ++ * when configurations are set, or when interface settings change ++ * for example the do_set_interface() in gadget layer, ++ * the driver will enable or disable the relevant endpoints ++ * ep0 doesn't use this routine. It is always enabled. ++-------------------------------------------------------------------------*/ ++static int fsl_ep_enable(struct usb_ep *_ep, ++ const struct usb_endpoint_descriptor *desc) ++{ ++ struct fsl_udc *udc = NULL; ++ struct fsl_ep *ep = NULL; ++ unsigned short max = 0; ++ unsigned char mult = 0, zlt; ++ int retval = -EINVAL; ++ unsigned long flags = 0; ++ ++ ep = container_of(_ep, struct fsl_ep, ep); ++ ++ /* catch various bogus parameters */ ++ if (!_ep || !desc || ep->desc ++ || (desc->bDescriptorType != USB_DT_ENDPOINT)) ++ return -EINVAL; ++ ++ udc = ep->udc; ++ ++ if (!udc->driver || (udc->gadget.speed == USB_SPEED_UNKNOWN)) ++ return -ESHUTDOWN; ++ ++ max = le16_to_cpu(desc->wMaxPacketSize); ++ ++ /* Disable automatic zlp generation. Driver is reponsible to indicate ++ * explicitly through req->req.zero. This is needed to enable multi-td ++ * request. */ ++ zlt = 1; ++ ++ /* Assume the max packet size from gadget is always correct */ ++ switch (desc->bmAttributes & 0x03) { ++ case USB_ENDPOINT_XFER_CONTROL: ++ case USB_ENDPOINT_XFER_BULK: ++ case USB_ENDPOINT_XFER_INT: ++ /* mult = 0. Execute N Transactions as demonstrated by ++ * the USB variable length packet protocol where N is ++ * computed using the Maximum Packet Length (dQH) and ++ * the Total Bytes field (dTD) */ ++ mult = 0; ++ break; ++ case USB_ENDPOINT_XFER_ISOC: ++ /* Calculate transactions needed for high bandwidth iso */ ++ mult = (unsigned char)(1 + ((max >> 11) & 0x03)); ++ max = max & 0x8ff; /* bit 0~10 */ ++ /* 3 transactions at most */ ++ if (mult > 3) ++ goto en_done; ++ break; ++ default: ++ goto en_done; ++ } ++ ++ spin_lock_irqsave(&udc->lock, flags); ++ ep->ep.maxpacket = max; ++ ep->desc = desc; ++ ep->stopped = 0; ++ ++ /* Controller related setup */ ++ /* Init EPx Queue Head (Ep Capabilites field in QH ++ * according to max, zlt, mult) */ ++ struct_ep_qh_setup(udc, (unsigned char) ep_index(ep), ++ (unsigned char) ((desc->bEndpointAddress & USB_DIR_IN) ++ ? USB_SEND : USB_RECV), ++ (unsigned char) (desc->bmAttributes ++ & USB_ENDPOINT_XFERTYPE_MASK), ++ max, zlt, mult); ++ ++ /* Init endpoint ctrl register */ ++ dr_ep_setup((unsigned char) ep_index(ep), ++ (unsigned char) ((desc->bEndpointAddress & USB_DIR_IN) ++ ? USB_SEND : USB_RECV), ++ (unsigned char) (desc->bmAttributes ++ & USB_ENDPOINT_XFERTYPE_MASK)); ++ ++ spin_unlock_irqrestore(&udc->lock, flags); ++ retval = 0; ++ ++ VDBG("enabled %s (ep%d%s) maxpacket %d", ep->ep.name, ++ ep->desc->bEndpointAddress & 0x0f, ++ (desc->bEndpointAddress & USB_DIR_IN) ++ ? "in" : "out", max); ++en_done: ++ return retval; ++} ++ ++/*--------------------------------------------------------------------- ++ * @ep : the ep being unconfigured. May not be ep0 ++ * Any pending and uncomplete req will complete with status (-ESHUTDOWN) ++*---------------------------------------------------------------------*/ ++static int fsl_ep_disable(struct usb_ep *_ep) ++{ ++ struct fsl_udc *udc = NULL; ++ struct fsl_ep *ep = NULL; ++ unsigned long flags = 0; ++ u32 epctrl; ++ int ep_num; ++ ++ ep = container_of(_ep, struct fsl_ep, ep); ++ if (!_ep || !ep->desc) { ++ pr_debug("udc: %s not enabled\n", _ep ? ep->ep.name : NULL); ++ return -EINVAL; ++ } ++ ++ /* disable ep on controller */ ++ ep_num = ep_index(ep); ++ epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]); ++ if (ep_is_in(ep)) ++ epctrl &= ~EPCTRL_TX_ENABLE; ++ else ++ epctrl &= ~EPCTRL_RX_ENABLE; ++ fsl_writel(epctrl, &dr_regs->endptctrl[ep_num]); ++ ++ udc = (struct fsl_udc *)ep->udc; ++ spin_lock_irqsave(&udc->lock, flags); ++ ++ /* nuke all pending requests (does flush) */ ++ nuke(ep, -ESHUTDOWN); ++ ++ ep->desc = 0; ++ ep->stopped = 1; ++ spin_unlock_irqrestore(&udc->lock, flags); ++ ++ pr_debug("udc: disabled %s OK\n", _ep->name); ++ return 0; ++} ++ ++/*--------------------------------------------------------------------- ++ * allocate a request object used by this endpoint ++ * the main operation is to insert the req->queue to the eq->queue ++ * Returns the request, or null if one could not be allocated ++*---------------------------------------------------------------------*/ ++static struct usb_request * ++fsl_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags) ++{ ++ struct fsl_req *req = NULL; ++ ++ req = kzalloc(sizeof *req, gfp_flags); ++ if (!req) ++ return NULL; ++ ++ req->req.dma = DMA_ADDR_INVALID; ++ pr_debug("udc: req=0x%p set req.dma=0x%x\n", req, req->req.dma); ++ INIT_LIST_HEAD(&req->queue); ++ ++ return &req->req; ++} ++ ++static void fsl_free_request(struct usb_ep *_ep, struct usb_request *_req) ++{ ++ struct fsl_req *req; ++ ++ req = container_of(_req, struct fsl_req, req); ++ pr_debug("udc: req=0x%p\n", req); ++ ++ if (_req) ++ kfree(req); ++} ++ ++/*-------------------------------------------------------------------------*/ ++static int fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req) ++{ ++ int i = ep_index(ep) * 2 + ep_is_in(ep); ++ u32 temp, bitmask, tmp_stat; ++ struct ep_queue_head *dQH = &ep->udc->ep_qh[i]; ++ ++ pr_debug("udc: queue req=0x%p to ep index %d\n", req, i); ++ ++ bitmask = ep_is_in(ep) ++ ? (1 << (ep_index(ep) + 16)) ++ : (1 << (ep_index(ep))); ++ ++ /* check if the pipe is empty */ ++ if (!(list_empty(&ep->queue))) { ++ /* Add td to the end */ ++ struct fsl_req *lastreq; ++ lastreq = list_entry(ep->queue.prev, struct fsl_req, queue); ++ lastreq->tail->next_td_ptr = ++ cpu_to_hc32(req->head->td_dma & DTD_ADDR_MASK); ++ /* Read prime bit, if 1 goto done */ ++ if (fsl_readl(&dr_regs->endpointprime) & bitmask) ++ goto out; ++ ++ do { ++ /* Set ATDTW bit in USBCMD */ ++ temp = fsl_readl(&dr_regs->usbcmd); ++ fsl_writel(temp | USB_CMD_ATDTW, &dr_regs->usbcmd); ++ ++ /* Read correct status bit */ ++ tmp_stat = fsl_readl(&dr_regs->endptstatus) & bitmask; ++ ++ } while (!(fsl_readl(&dr_regs->usbcmd) & USB_CMD_ATDTW)); ++ ++ /* Write ATDTW bit to 0 */ ++ temp = fsl_readl(&dr_regs->usbcmd); ++ fsl_writel(temp & ~USB_CMD_ATDTW, &dr_regs->usbcmd); ++ ++ if (tmp_stat) ++ goto out; ++ } ++ ++ /* Write dQH next pointer and terminate bit to 0 */ ++ temp = req->head->td_dma & EP_QUEUE_HEAD_NEXT_POINTER_MASK; ++ dQH->next_dtd_ptr = cpu_to_hc32(temp); ++ ++ /* Clear active and halt bit */ ++ temp = cpu_to_hc32(~(EP_QUEUE_HEAD_STATUS_ACTIVE ++ | EP_QUEUE_HEAD_STATUS_HALT)); ++ dQH->size_ioc_int_sts &= temp; ++ ++ /* Prime endpoint by writing 1 to ENDPTPRIME */ ++ temp = ep_is_in(ep) ++ ? (1 << (ep_index(ep) + 16)) ++ : (1 << (ep_index(ep))); ++ fsl_writel(temp, &dr_regs->endpointprime); ++out: ++ return 0; ++} ++ ++/* Fill in the dTD structure ++ * @req: request that the transfer belongs to ++ * @length: return actually data length of the dTD ++ * @dma: return dma address of the dTD ++ * @is_last: return flag if it is the last dTD of the request ++ * return: pointer to the built dTD */ ++static struct ep_td_struct *fsl_build_dtd(struct fsl_req *req, unsigned *length, ++ dma_addr_t *dma, int *is_last) ++{ ++ u32 swap_temp; ++ struct ep_td_struct *dtd; ++ ++ /* how big will this transfer be? */ ++ *length = min(req->req.length - req->req.actual, ++ (unsigned)EP_MAX_LENGTH_TRANSFER); ++ ++ dtd = dma_pool_alloc(udc_controller->td_pool, GFP_KERNEL, dma); ++ if (dtd == NULL) ++ return dtd; ++ ++ dtd->td_dma = *dma; ++ /* Clear reserved field */ ++ swap_temp = hc32_to_cpu(dtd->size_ioc_sts); ++ swap_temp &= ~DTD_RESERVED_FIELDS; ++ dtd->size_ioc_sts = cpu_to_hc32(swap_temp); ++ ++ /* Init all of buffer page pointers */ ++ swap_temp = (u32) (req->req.dma + req->req.actual); ++ dtd->buff_ptr0 = cpu_to_hc32(swap_temp); ++ dtd->buff_ptr1 = cpu_to_hc32(swap_temp + 0x1000); ++ dtd->buff_ptr2 = cpu_to_hc32(swap_temp + 0x2000); ++ dtd->buff_ptr3 = cpu_to_hc32(swap_temp + 0x3000); ++ dtd->buff_ptr4 = cpu_to_hc32(swap_temp + 0x4000); ++ ++ req->req.actual += *length; ++ ++ /* zlp is needed if req->req.zero is set */ ++ if (req->req.zero) { ++ if (*length == 0 || (*length % req->ep->ep.maxpacket) != 0) ++ *is_last = 1; ++ else ++ *is_last = 0; ++ } else if (req->req.length == req->req.actual) ++ *is_last = 1; ++ else ++ *is_last = 0; ++ ++ if ((*is_last) == 0) ++ VDBG("multi-dtd request!\n"); ++ /* Fill in the transfer size; set active bit */ ++ swap_temp = ((*length << DTD_LENGTH_BIT_POS) | DTD_STATUS_ACTIVE); ++ ++ /* Enable interrupt for the last dtd of a request */ ++ if (*is_last && !req->req.no_interrupt) ++ swap_temp |= DTD_IOC; ++ ++ dtd->size_ioc_sts = cpu_to_hc32(swap_temp); ++ ++ mb(); ++ ++ VDBG("length = %d address= 0x%x", *length, (int)*dma); ++ ++ return dtd; ++} ++ ++/* Generate dtd chain for a request */ ++static int fsl_req_to_dtd(struct fsl_req *req) ++{ ++ unsigned count; ++ int is_last; ++ int is_first = 1; ++ struct ep_td_struct *last_dtd = NULL, *dtd; ++ dma_addr_t dma; ++ ++ do { ++ dtd = fsl_build_dtd(req, &count, &dma, &is_last); ++ if (dtd == NULL) ++ return -ENOMEM; ++ ++ if (is_first) { ++ is_first = 0; ++ req->head = dtd; ++ } else { ++ last_dtd->next_td_ptr = hc32_to_cpu(dma); ++ last_dtd->next_td_virt = dtd; ++ } ++ last_dtd = dtd; ++ ++ req->dtd_count++; ++ } while (!is_last); ++ ++ dtd->next_td_ptr = cpu_to_hc32(DTD_NEXT_TERMINATE); ++ ++ req->tail = dtd; ++ ++ return 0; ++} ++ ++/* queues (submits) an I/O request to an endpoint */ ++static int ++fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) ++{ ++ struct fsl_ep *ep = container_of(_ep, struct fsl_ep, ep); ++ struct fsl_req *req = container_of(_req, struct fsl_req, req); ++ struct fsl_udc *udc; ++ unsigned long flags; ++ int is_iso = 0; ++ ++ /* catch various bogus parameters */ ++ if (!_req || !req->req.complete || !req->req.buf ++ || !list_empty(&req->queue)) { ++ VDBG("%s, bad params\n", __FUNCTION__); ++ return -EINVAL; ++ } ++ if (!_ep || (!ep->desc && ep_index(ep))) { ++ VDBG("%s, bad ep\n", __FUNCTION__); ++ return -EINVAL; ++ } ++ if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) { ++ if (req->req.length > ep->ep.maxpacket) ++ return -EMSGSIZE; ++ is_iso = 1; ++ } ++ ++ udc = ep->udc; ++ if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) ++ return -ESHUTDOWN; ++ ++ req->ep = ep; ++ ++ /* map virtual address to hardware */ ++ if (req->req.dma == DMA_ADDR_INVALID) { ++ req->req.dma = dma_map_single(ep->udc->gadget.dev.parent, ++ req->req.buf, ++ req->req.length, ep_is_in(ep) ++ ? DMA_TO_DEVICE ++ : DMA_FROM_DEVICE); ++ req->mapped = 1; ++ } else { ++ dma_sync_single_for_device(ep->udc->gadget.dev.parent, ++ req->req.dma, req->req.length, ++ ep_is_in(ep) ++ ? DMA_TO_DEVICE ++ : DMA_FROM_DEVICE); ++ req->mapped = 0; ++ } ++ ++ req->req.status = -EINPROGRESS; ++ req->req.actual = 0; ++ req->dtd_count = 0; ++ ++ spin_lock_irqsave(&udc->lock, flags); ++ ++ /* build dtds and push them to device queue */ ++ if (!fsl_req_to_dtd(req)) { ++ fsl_queue_td(ep, req); ++ } else { ++ spin_unlock_irqrestore(&udc->lock, flags); ++ return -ENOMEM; ++ } ++ ++ /* Update ep0 state */ ++ if ((ep_index(ep) == 0)) ++ udc->ep0_state = DATA_STATE_XMIT; ++ ++ /* irq handler advances the queue */ ++ if (req != NULL) ++ list_add_tail(&req->queue, &ep->queue); ++ spin_unlock_irqrestore(&udc->lock, flags); ++ ++ return 0; ++} ++ ++/* dequeues (cancels, unlinks) an I/O request from an endpoint */ ++static int fsl_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) ++{ ++ struct fsl_ep *ep = container_of(_ep, struct fsl_ep, ep); ++ struct fsl_req *req; ++ unsigned long flags; ++ int ep_num, stopped, ret = 0; ++ u32 epctrl; ++ ++ if (!_ep || !_req) ++ return -EINVAL; ++ ++ spin_lock_irqsave(&ep->udc->lock, flags); ++ stopped = ep->stopped; ++ ++ /* Stop the ep before we deal with the queue */ ++ ep->stopped = 1; ++ ep_num = ep_index(ep); ++ epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]); ++ if (ep_is_in(ep)) ++ epctrl &= ~EPCTRL_TX_ENABLE; ++ else ++ epctrl &= ~EPCTRL_RX_ENABLE; ++ fsl_writel(epctrl, &dr_regs->endptctrl[ep_num]); ++ ++ /* make sure it's actually queued on this endpoint */ ++ list_for_each_entry(req, &ep->queue, queue) { ++ if (&req->req == _req) ++ break; ++ } ++ if (&req->req != _req) { ++ ret = -EINVAL; ++ goto out; ++ } ++ ++ /* The request is in progress, or completed but not dequeued */ ++ if (ep->queue.next == &req->queue) { ++ _req->status = -ECONNRESET; ++ fsl_ep_fifo_flush(_ep); /* flush current transfer */ ++ ++ /* The request isn't the last request in this ep queue */ ++ if (req->queue.next != &ep->queue) { ++ struct ep_queue_head *qh; ++ struct fsl_req *next_req; ++ ++ qh = ep->qh; ++ next_req = list_entry(req->queue.next, struct fsl_req, ++ queue); ++ ++ /* Point the QH to the first TD of next request */ ++ fsl_writel((u32) next_req->head, &qh->curr_dtd_ptr); ++ } ++ ++ /* The request hasn't been processed, patch up the TD chain */ ++ } else { ++ struct fsl_req *prev_req; ++ ++ prev_req = list_entry(req->queue.prev, struct fsl_req, queue); ++ fsl_writel(fsl_readl(&req->tail->next_td_ptr), ++ &prev_req->tail->next_td_ptr); ++ ++ } ++ ++ done(ep, req, -ECONNRESET); ++ ++ /* Enable EP */ ++out: epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]); ++ if (ep_is_in(ep)) ++ epctrl |= EPCTRL_TX_ENABLE; ++ else ++ epctrl |= EPCTRL_RX_ENABLE; ++ fsl_writel(epctrl, &dr_regs->endptctrl[ep_num]); ++ ep->stopped = stopped; ++ ++ spin_unlock_irqrestore(&ep->udc->lock, flags); ++ return ret; ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++/*----------------------------------------------------------------- ++ * modify the endpoint halt feature ++ * @ep: the non-isochronous endpoint being stalled ++ * @value: 1--set halt 0--clear halt ++ * Returns zero, or a negative error code. ++*----------------------------------------------------------------*/ ++static int fsl_ep_set_halt(struct usb_ep *_ep, int value) ++{ ++ struct fsl_ep *ep = NULL; ++ unsigned long flags = 0; ++ int status = -EOPNOTSUPP; /* operation not supported */ ++ unsigned char ep_dir = 0, ep_num = 0; ++ struct fsl_udc *udc = NULL; ++ ++ ep = container_of(_ep, struct fsl_ep, ep); ++ udc = ep->udc; ++ if (!_ep || !ep->desc) { ++ status = -EINVAL; ++ goto out; ++ } ++ ++ if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) { ++ status = -EOPNOTSUPP; ++ goto out; ++ } ++ ++ /* Attempt to halt IN ep will fail if any transfer requests ++ * are still queue */ ++ if (value && ep_is_in(ep) && !list_empty(&ep->queue)) { ++ status = -EAGAIN; ++ goto out; ++ } ++ ++ status = 0; ++ ep_dir = ep_is_in(ep) ? USB_SEND : USB_RECV; ++ ep_num = (unsigned char)(ep_index(ep)); ++ spin_lock_irqsave(&ep->udc->lock, flags); ++ dr_ep_change_stall(ep_num, ep_dir, value); ++ spin_unlock_irqrestore(&ep->udc->lock, flags); ++ ++ if (ep_index(ep) == 0) { ++ udc->ep0_state = WAIT_FOR_SETUP; ++ udc->ep0_dir = 0; ++ } ++out: ++ VDBG(" %s %s halt stat %d", ep->ep.name, ++ value ? "set" : "clear", status); ++ ++ return status; ++} ++ ++static void fsl_ep_fifo_flush(struct usb_ep *_ep) ++{ ++ struct fsl_ep *ep; ++ int ep_num, ep_dir; ++ u32 bits; ++ unsigned long timeout; ++#define FSL_UDC_FLUSH_TIMEOUT 1000 ++ ++ if (!_ep) { ++ return; ++ } else { ++ ep = container_of(_ep, struct fsl_ep, ep); ++ if (!ep->desc) ++ return; ++ } ++ ep_num = ep_index(ep); ++ ep_dir = ep_is_in(ep) ? USB_SEND : USB_RECV; ++ ++ if (ep_num == 0) ++ bits = (1 << 16) | 1; ++ else if (ep_dir == USB_SEND) ++ bits = 1 << (16 + ep_num); ++ else ++ bits = 1 << ep_num; ++ ++ timeout = jiffies + FSL_UDC_FLUSH_TIMEOUT; ++ do { ++ fsl_writel(bits, &dr_regs->endptflush); ++ ++ /* Wait until flush complete */ ++ while (fsl_readl(&dr_regs->endptflush)) { ++ if (time_after(jiffies, timeout)) { ++ ERR("ep flush timeout\n"); ++ return; ++ } ++ cpu_relax(); ++ } ++ /* See if we need to flush again */ ++ } while (fsl_readl(&dr_regs->endptstatus) & bits); ++} ++ ++static struct usb_ep_ops fsl_ep_ops = { ++ .enable = fsl_ep_enable, ++ .disable = fsl_ep_disable, ++ ++ .alloc_request = fsl_alloc_request, ++ .free_request = fsl_free_request, ++ ++ .queue = fsl_ep_queue, ++ .dequeue = fsl_ep_dequeue, ++ ++ .set_halt = fsl_ep_set_halt, ++ .fifo_flush = fsl_ep_fifo_flush, /* flush fifo */ ++}; ++ ++/*------------------------------------------------------------------------- ++ Gadget Driver Layer Operations ++-------------------------------------------------------------------------*/ ++ ++/*---------------------------------------------------------------------- ++ * Get the current frame number (from DR frame_index Reg ) ++ *----------------------------------------------------------------------*/ ++static int fsl_get_frame(struct usb_gadget *gadget) ++{ ++ return (int)(fsl_readl(&dr_regs->frindex) & USB_FRINDEX_MASKS); ++} ++ ++/*----------------------------------------------------------------------- ++ * Tries to wake up the host connected to this gadget ++ -----------------------------------------------------------------------*/ ++static int fsl_wakeup(struct usb_gadget *gadget) ++{ ++ struct fsl_udc *udc = container_of(gadget, struct fsl_udc, gadget); ++ u32 portsc; ++ ++ /* Remote wakeup feature not enabled by host */ ++ if (!udc->remote_wakeup) ++ return -ENOTSUPP; ++ ++ portsc = fsl_readl(&dr_regs->portsc1); ++ /* not suspended? */ ++ if (!(portsc & PORTSCX_PORT_SUSPEND)) ++ return 0; ++ /* trigger force resume */ ++ portsc |= PORTSCX_PORT_FORCE_RESUME; ++ fsl_writel(portsc, &dr_regs->portsc1); ++ return 0; ++} ++ ++static int can_pullup(struct fsl_udc *udc) ++{ ++ return udc->driver && udc->softconnect && udc->vbus_active; ++} ++ ++/* ++ * Notify controller that VBUS is powered, Called by whatever ++ * detects VBUS sessions ++ * @param gadger gadger pointer ++ * @param is_active is active? ++ * @return Returns zero on success , or a negative error code ++ */ ++static int fsl_vbus_session(struct usb_gadget *gadget, int is_active) ++{ ++ struct fsl_udc *udc; ++ unsigned long flags; ++ ++ udc = container_of(gadget, struct fsl_udc, gadget); ++ spin_lock_irqsave(&udc->lock, flags); ++ ++ pr_debug("udc: VBUS %s\n", is_active ? "on" : "off"); ++ udc->vbus_active = (is_active != 0); ++ ++ if (can_pullup(udc)) { ++ pullup_enable(udc); ++ udc_controller->usb_state = USB_STATE_ATTACHED; ++ } else { ++ pullup_disable(udc); ++ udc_controller->usb_state = USB_STATE_NOTATTACHED; ++ } ++ udc_controller->ep0_state = WAIT_FOR_SETUP; ++ udc_controller->ep0_dir = 0; ++ ++ spin_unlock_irqrestore(&udc->lock, flags); ++ return 0; ++} ++ ++/* constrain controller's VBUS power usage ++ * This call is used by gadget drivers during SET_CONFIGURATION calls, ++ * reporting how much power the device may consume. For example, this ++ * could affect how quickly batteries are recharged. ++ * ++ * Returns zero on success, else negative errno. ++ */ ++static int fsl_vbus_draw(struct usb_gadget *gadget, unsigned mA) ++{ ++#ifdef CONFIG_USB_OTG ++ struct fsl_udc *udc; ++ ++ udc = container_of(gadget, struct fsl_udc, gadget); ++ ++ if (udc->transceiver) ++ return otg_set_power(udc->transceiver, mA); ++#endif ++ return -ENOTSUPP; ++} ++ ++/* ++ * Change Data+ pullup status ++ * this func is used by usb_gadget_connect/disconnet ++ */ ++static int fsl_pullup(struct usb_gadget *gadget, int is_on) ++{ ++ struct fsl_udc *udc; ++ ++ udc = container_of(gadget, struct fsl_udc, gadget); ++ udc->softconnect = (is_on != 0); ++ if (can_pullup(udc)) ++ fsl_writel((fsl_readl(&dr_regs->usbcmd) | USB_CMD_RUN_STOP), ++ &dr_regs->usbcmd); ++ else ++ fsl_writel((fsl_readl(&dr_regs->usbcmd) & ~USB_CMD_RUN_STOP), ++ &dr_regs->usbcmd); ++ ++ return 0; ++} ++ ++/* defined in usb_gadget.h */ ++static struct usb_gadget_ops fsl_gadget_ops = { ++ .get_frame = fsl_get_frame, ++ .wakeup = fsl_wakeup, ++ .vbus_session = fsl_vbus_session, ++ .vbus_draw = fsl_vbus_draw, ++ .pullup = fsl_pullup, ++}; ++ ++/* Set protocol stall on ep0, protocol stall will automatically be cleared ++ on new transaction */ ++static void ep0stall(struct fsl_udc *udc) ++{ ++ u32 tmp; ++ ++ /* must set tx and rx to stall at the same time */ ++ tmp = fsl_readl(&dr_regs->endptctrl[0]); ++ tmp |= EPCTRL_TX_EP_STALL | EPCTRL_RX_EP_STALL; ++ fsl_writel(tmp, &dr_regs->endptctrl[0]); ++ udc->ep0_state = WAIT_FOR_SETUP; ++ udc->ep0_dir = 0; ++} ++ ++/* Prime a status phase for ep0 */ ++static int ep0_prime_status(struct fsl_udc *udc, int direction) ++{ ++ struct fsl_req *req = udc->status_req; ++ struct fsl_ep *ep; ++ int status = 0; ++ ++ if (direction == EP_DIR_IN) ++ udc->ep0_dir = USB_DIR_IN; ++ else ++ udc->ep0_dir = USB_DIR_OUT; ++ ++ ep = &udc->eps[0]; ++ udc->ep0_state = WAIT_FOR_OUT_STATUS; ++ ++ req->ep = ep; ++ req->req.length = 0; ++ req->req.status = -EINPROGRESS; ++ req->req.actual = 0; ++ req->req.complete = NULL; ++ req->dtd_count = 0; ++ ++ if (fsl_req_to_dtd(req) == 0) ++ status = fsl_queue_td(ep, req); ++ else ++ return -ENOMEM; ++ ++ if (status) ++ ERR("Can't queue ep0 status request \n"); ++ list_add_tail(&req->queue, &ep->queue); ++ ++ return status; ++} ++ ++static inline int udc_reset_ep_queue(struct fsl_udc *udc, u8 pipe) ++{ ++ struct fsl_ep *ep = get_ep_by_pipe(udc, pipe); ++ ++ if (!ep->name) ++ return 0; ++ ++ nuke(ep, -ESHUTDOWN); ++ ++ return 0; ++} ++ ++/* ++ * ch9 Set address ++ */ ++static void ch9setaddress(struct fsl_udc *udc, u16 value, u16 index, u16 length) ++{ ++ /* Save the new address to device struct */ ++ udc->device_address = (u8) value; ++ /* Update usb state */ ++ udc->usb_state = USB_STATE_ADDRESS; ++ /* Status phase */ ++ if (ep0_prime_status(udc, EP_DIR_IN)) ++ ep0stall(udc); ++} ++ ++/* ++ * ch9 Get status ++ */ ++static void ch9getstatus(struct fsl_udc *udc, u8 request_type, u16 value, ++ u16 index, u16 length) ++{ ++ u16 tmp = 0; /* Status, cpu endian */ ++ ++ struct fsl_req *req; ++ struct fsl_ep *ep; ++ int status = 0; ++ ++ ep = &udc->eps[0]; ++ ++ if ((request_type & USB_RECIP_MASK) == USB_RECIP_DEVICE) { ++ /* Get device status */ ++ tmp = 1 << USB_DEVICE_SELF_POWERED; ++ tmp |= udc->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP; ++ } else if ((request_type & USB_RECIP_MASK) == USB_RECIP_INTERFACE) { ++ /* Get interface status */ ++ /* We don't have interface information in udc driver */ ++ tmp = 0; ++ } else if ((request_type & USB_RECIP_MASK) == USB_RECIP_ENDPOINT) { ++ /* Get endpoint status */ ++ struct fsl_ep *target_ep; ++ ++ target_ep = get_ep_by_pipe(udc, get_pipe_by_windex(index)); ++ ++ /* stall if endpoint doesn't exist */ ++ if (!target_ep->desc) ++ goto stall; ++ tmp = dr_ep_get_stall(ep_index(target_ep), ep_is_in(target_ep)) ++ << USB_ENDPOINT_HALT; ++ } ++ ++ udc->ep0_dir = USB_DIR_IN; ++ /* Borrow the per device status_req */ ++ req = udc->status_req; ++ /* Fill in the reqest structure */ ++ *((u16 *) req->req.buf) = cpu_to_le16(tmp); ++ req->ep = ep; ++ req->req.length = 2; ++ req->req.status = -EINPROGRESS; ++ req->req.actual = 0; ++ req->req.complete = NULL; ++ req->dtd_count = 0; ++ ++ /* prime the data phase */ ++ if ((fsl_req_to_dtd(req) == 0)) ++ status = fsl_queue_td(ep, req); ++ else /* no mem */ ++ goto stall; ++ ++ if (status) { ++ ERR("Can't respond to getstatus request \n"); ++ goto stall; ++ } ++ list_add_tail(&req->queue, &ep->queue); ++ udc->ep0_state = DATA_STATE_XMIT; ++ return; ++stall: ++ ep0stall(udc); ++} ++ ++static void ch9setconfig(struct fsl_udc *udc, u16 value, u16 index, ++ u16 length) ++{ ++ pr_debug("udc: 1 calling gadget driver->setup\n"); ++ udc->ep0_dir = USB_DIR_IN; ++ if (udc->driver->setup(&udc->gadget, &udc->local_setup_buff) >= 0) { ++ /* gadget layer deal with the status phase */ ++ udc->usb_state = USB_STATE_CONFIGURED; ++ udc->ep0_state = WAIT_FOR_OUT_STATUS; ++ pr_debug("udc: ep0_state now WAIT_FOR_OUT_STATUS\n"); ++ } ++} ++ ++static void setup_received_irq(struct fsl_udc *udc, ++ struct usb_ctrlrequest *setup) ++{ ++ u32 tmp; ++ u16 ptc = 0; /* port test control */ ++ int handled = 1; /* set to zero if we do not handle the message, ++ and should pass it to the gadget driver */ ++ ++ /* ++ * gadget drivers expect the setup pkt to be in wire format, ++ * so leave it alone and make local copies of stuff we need. ++ */ ++ u16 wValue = le16_to_cpu(setup->wValue); ++ u16 wIndex = le16_to_cpu(setup->wIndex); ++ u16 wLength = le16_to_cpu(setup->wLength); ++ ++ ++ pr_debug("udc: request=0x%x\n", setup->bRequest); ++ ++ udc_reset_ep_queue(udc, 0); ++ ++ /* We asume setup only occurs on EP0 */ ++ if (setup->bRequestType & USB_DIR_IN) ++ udc->ep0_dir = USB_DIR_IN; ++ else ++ udc->ep0_dir = USB_DIR_OUT; ++ ++ if ((setup->bRequestType & USB_TYPE_MASK) == USB_TYPE_CLASS) { ++ /* handle class requests */ ++ switch (setup->bRequest) { ++ ++ case USB_BULK_RESET_REQUEST: ++ udc->ep0_dir = USB_DIR_IN; ++ if (udc->driver->setup(&udc->gadget, ++ &udc->local_setup_buff) >= 0) { ++ udc->ep0_state = WAIT_FOR_SETUP; ++ pr_debug("udc: ep0_state now WAIT_FOR_SETUP\n"); ++ } ++ break; ++ ++ default: ++ handled = 0; ++ break; ++ } ++ } else if ((setup->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) { ++ /* handle standard requests */ ++ switch (setup->bRequest) { ++ ++ case USB_REQ_GET_STATUS: ++ if ((setup-> ++ bRequestType & (USB_DIR_IN | USB_TYPE_STANDARD)) ++ != (USB_DIR_IN | USB_TYPE_STANDARD)) ++ break; ++ ch9getstatus(udc, setup->bRequestType, wValue, wIndex, ++ wLength); ++ break; ++ ++ case USB_REQ_SET_ADDRESS: ++ if (setup->bRequestType != ++ (USB_DIR_OUT | USB_TYPE_STANDARD | ++ USB_RECIP_DEVICE)) ++ break; ++ ch9setaddress(udc, wValue, wIndex, wLength); ++ break; ++ ++ case USB_REQ_SET_CONFIGURATION: ++ if (setup->bRequestType != ++ (USB_DIR_OUT | USB_TYPE_STANDARD | ++ USB_RECIP_DEVICE)) ++ break; ++ /* gadget layer take over the status phase */ ++ ch9setconfig(udc, wValue, wIndex, wLength); ++ break; ++ case USB_REQ_SET_INTERFACE: ++ if (setup->bRequestType != ++ (USB_DIR_OUT | USB_TYPE_STANDARD | ++ USB_RECIP_INTERFACE)) ++ break; ++ udc->ep0_dir = USB_DIR_IN; ++ if (udc->driver->setup(&udc->gadget, ++ &udc->local_setup_buff) >= 0) ++ /* gadget layer take over the status phase */ ++ break; ++ /* Requests with no data phase */ ++ case USB_REQ_CLEAR_FEATURE: ++ case USB_REQ_SET_FEATURE: ++ { /* status transaction */ ++ int rc = -EOPNOTSUPP; ++ ++ if ((setup->bRequestType & USB_TYPE_MASK) != ++ USB_TYPE_STANDARD) ++ break; ++ ++ /* we only support set/clear feature for ++ * endpoint */ ++ if (setup->bRequestType == USB_RECIP_ENDPOINT) { ++ int dir = (wIndex & 0x0080) ? ++ EP_DIR_IN : EP_DIR_OUT; ++ int num = (wIndex & 0x000f); ++ struct fsl_ep *ep; ++ ++ if (wValue != 0 ++ || wLength != 0 ++ || (num * 2 + dir) > udc->max_ep) ++ break; ++ ep = &udc->eps[num * 2 + dir]; ++ ++ if (setup->bRequest == ++ USB_REQ_SET_FEATURE) { ++ pr_debug("udc: udc: SET_FEATURE" ++ " doing set_halt\n"); ++ rc = fsl_ep_set_halt(&ep-> ep, ++ 1); ++ } else { ++ pr_debug("udc: CLEAR_FEATURE" ++ " doing clear_halt\n"); ++ rc = fsl_ep_set_halt(&ep-> ep, ++ 0); ++ } ++ ++ } else if (setup->bRequestType == ++ USB_RECIP_DEVICE) { ++ if (setup->bRequest == ++ USB_REQ_SET_FEATURE) { ++ ptc = wIndex >> 8; ++ rc = 0; ++ } ++ if (!udc->gadget.is_otg) ++ break; ++ else if (setup->bRequest == ++ USB_DEVICE_B_HNP_ENABLE) ++ udc->gadget.b_hnp_enable = 1; ++ else if (setup->bRequest == ++ USB_DEVICE_A_HNP_SUPPORT) ++ udc->gadget.a_hnp_support = 1; ++ else if (setup->bRequest == ++ USB_DEVICE_A_ALT_HNP_SUPPORT) ++ udc->gadget.a_alt_hnp_support = ++ 1; ++ rc = 0; ++ } ++ if (rc == 0) { ++ /* send status only if ++ * fsl_ep_set_halt success */ ++ if (ep0_prime_status(udc, EP_DIR_IN)) ++ ep0stall(udc); ++ } ++ break; ++ } ++ default: ++ handled = 0; ++ break; ++ } ++ } else { ++ /* vendor requests */ ++ handled = 0; ++ } ++ ++ if (!handled) { ++ if (udc->driver->setup(&udc->gadget, &udc->local_setup_buff) ++ != 0) { ++ ep0stall(udc); ++ } else if (setup->bRequestType & USB_DIR_IN) { ++ udc->ep0_state = DATA_STATE_XMIT; ++ pr_debug("udc: ep0_state now DATA_STATE_XMIT\n"); ++ } else { ++ udc->ep0_state = DATA_STATE_RECV; ++ pr_debug("udc: ep0_state now DATA_STATE_RECV\n"); ++ } ++ } ++ ++ if (ptc) { ++ tmp =fsl_readl(&dr_regs->portsc1) | ptc << 16; ++ fsl_writel(tmp, &dr_regs->portsc1); ++ pr_debug("udc: switch to test mode.\n"); ++ } ++} ++ ++/* Process request for Data or Status phase of ep0 ++ * prime status phase if needed */ ++static void ep0_req_complete(struct fsl_udc *udc, struct fsl_ep *ep0, ++ struct fsl_req *req) ++{ ++ if (udc->usb_state == USB_STATE_ADDRESS) { ++ /* Set the new address */ ++ u32 new_address = (u32) udc->device_address; ++ fsl_writel(new_address << USB_DEVICE_ADDRESS_BIT_POS, ++ &dr_regs->deviceaddr); ++ } ++ ++ done(ep0, req, 0); ++ ++ switch (udc->ep0_state) { ++ case DATA_STATE_XMIT: ++ /* receive status phase */ ++ if (ep0_prime_status(udc, EP_DIR_OUT)) ++ ep0stall(udc); ++ break; ++ case DATA_STATE_RECV: ++ /* send status phase */ ++ if (ep0_prime_status(udc, EP_DIR_IN)) ++ ep0stall(udc); ++ break; ++ case WAIT_FOR_OUT_STATUS: ++ udc->ep0_state = WAIT_FOR_SETUP; ++ break; ++ case WAIT_FOR_SETUP: ++ ERR("Unexpect ep0 packets \n"); ++ break; ++ default: ++ ep0stall(udc); ++ break; ++ } ++} ++ ++/* Tripwire mechanism to ensure a setup packet payload is extracted without ++ * being corrupted by another incoming setup packet */ ++static void tripwire_handler(struct fsl_udc *udc, u8 ep_num, u8 *buffer_ptr) ++{ ++ u32 temp; ++ struct ep_queue_head *qh; ++ struct fsl_usb2_platform_data *pdata = udc->pdata; ++ ++ qh = &udc->ep_qh[ep_num * 2 + EP_DIR_OUT]; ++ ++ /* Clear bit in ENDPTSETUPSTAT */ ++ temp = fsl_readl(&dr_regs->endptsetupstat); ++ fsl_writel(temp | (1 << ep_num), &dr_regs->endptsetupstat); ++ ++ /* while a hazard exists when setup package arrives */ ++ do { ++ /* Set Setup Tripwire */ ++ temp = fsl_readl(&dr_regs->usbcmd); ++ fsl_writel(temp | USB_CMD_SUTW, &dr_regs->usbcmd); ++ ++ /* Copy the setup packet to local buffer */ ++ if (pdata->le_setup_buf) { ++ u32 *p = (u32 *)buffer_ptr; ++ u32 *s = (u32 *)qh->setup_buffer; ++ ++ /* Convert little endian setup buffer to CPU endian */ ++ *p++ = le32_to_cpu(*s++); ++ *p = le32_to_cpu(*s); ++ } else { ++ memcpy(buffer_ptr, (u8 *) qh->setup_buffer, 8); ++ } ++ } while (!(fsl_readl(&dr_regs->usbcmd) & USB_CMD_SUTW)); ++ ++ /* Clear Setup Tripwire */ ++ temp = fsl_readl(&dr_regs->usbcmd); ++ fsl_writel(temp & ~USB_CMD_SUTW, &dr_regs->usbcmd); ++} ++ ++/* process-ep_req(): free the completed Tds for this req */ ++static int process_ep_req(struct fsl_udc *udc, int pipe, ++ struct fsl_req *curr_req) ++{ ++ struct ep_td_struct *curr_td; ++ int td_complete, actual, remaining_length, j, tmp; ++ int status = 0; ++ int errors = 0; ++ struct ep_queue_head *curr_qh = &udc->ep_qh[pipe]; ++ int direction = pipe % 2; ++ ++ curr_td = curr_req->head; ++ td_complete = 0; ++ actual = curr_req->req.length; ++ ++ for (j = 0; j < curr_req->dtd_count; j++) { ++ remaining_length = (hc32_to_cpu(curr_td->size_ioc_sts) ++ & DTD_PACKET_SIZE) ++ >> DTD_LENGTH_BIT_POS; ++ actual -= remaining_length; ++ ++ (errors = hc32_to_cpu(curr_td->size_ioc_sts) & DTD_ERROR_MASK); ++ if (errors) { ++ if (errors & DTD_STATUS_HALTED) { ++ ERR("dTD error %08x QH=%d\n", errors, pipe); ++ /* Clear the errors and Halt condition */ ++ tmp = hc32_to_cpu(curr_qh->size_ioc_int_sts); ++ tmp &= ~errors; ++ curr_qh->size_ioc_int_sts = cpu_to_hc32(tmp); ++ status = -EPIPE; ++ /* FIXME: continue with next queued TD? */ ++ ++ break; ++ } ++ if (errors & DTD_STATUS_DATA_BUFF_ERR) { ++ VDBG("Transfer overflow"); ++ status = -EPROTO; ++ break; ++ } else if (errors & DTD_STATUS_TRANSACTION_ERR) { ++ VDBG("ISO error"); ++ status = -EILSEQ; ++ break; ++ } else ++ ERR("Unknown error has occured (0x%x)!\r\n", ++ errors); ++ ++ } else if (hc32_to_cpu(curr_td->size_ioc_sts) & ++ DTD_STATUS_ACTIVE) { ++ VDBG("Request not complete"); ++ status = REQ_UNCOMPLETE; ++ return status; ++ } else if (remaining_length) { ++ if (direction) { ++ VDBG("Transmit dTD remaining length not zero"); ++ status = -EPROTO; ++ break; ++ } else { ++ td_complete++; ++ break; ++ } ++ } else { ++ td_complete++; ++ VDBG("dTD transmitted successful "); ++ } ++ ++ if (j != curr_req->dtd_count - 1) ++ curr_td = curr_td->next_td_virt; ++ } ++ ++ if (status) ++ return status; ++ ++ curr_req->req.actual = actual; ++ ++ return 0; ++} ++ ++/* Process a DTD completion interrupt */ ++static void dtd_complete_irq(struct fsl_udc *udc) ++{ ++ u32 bit_pos; ++ int i, ep_num, direction, bit_mask, status; ++ struct fsl_ep *curr_ep; ++ struct fsl_req *curr_req, *temp_req; ++ ++ /* Clear the bits in the register */ ++ bit_pos = fsl_readl(&dr_regs->endptcomplete); ++ fsl_writel(bit_pos, &dr_regs->endptcomplete); ++ ++ if (!bit_pos) ++ return; ++ ++ for (i = 0; i < udc->max_ep * 2; i++) { ++ ep_num = i >> 1; ++ direction = i % 2; ++ ++ bit_mask = 1 << (ep_num + 16 * direction); ++ ++ if (!(bit_pos & bit_mask)) ++ continue; ++ ++ curr_ep = get_ep_by_pipe(udc, i); ++ ++ /* If the ep is configured */ ++ if (curr_ep->name == NULL) { ++ WARN("Invalid EP?"); ++ continue; ++ } ++ ++ /* process the req queue until an uncomplete request */ ++ list_for_each_entry_safe(curr_req, temp_req, &curr_ep->queue, ++ queue) { ++ status = process_ep_req(udc, i, curr_req); ++ ++ VDBG("status of process_ep_req= %d, ep = %d", ++ status, ep_num); ++ if (status == REQ_UNCOMPLETE) ++ break; ++ /* write back status to req */ ++ curr_req->req.status = status; ++ ++ if (ep_num == 0) { ++ ep0_req_complete(udc, curr_ep, curr_req); ++ break; ++ } else { ++ done(curr_ep, curr_req, status); ++ } ++ } ++ } ++} ++ ++/* Process a port change interrupt */ ++static void port_change_irq(struct fsl_udc *udc) ++{ ++ u32 speed; ++ ++ VDBG("portsc=0x%x", fsl_readl(&dr_regs->portsc1) ); ++ if (udc->bus_reset) ++ udc->bus_reset = 0; ++ ++ /* Bus resetting is finished */ ++ if (!(fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET)) { ++ /* Get the speed */ ++ speed = fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_SPEED_MASK; ++ switch (speed) { ++ case PORTSCX_PORT_SPEED_HIGH: ++ udc->gadget.speed = USB_SPEED_HIGH; ++ break; ++ case PORTSCX_PORT_SPEED_FULL: ++ udc->gadget.speed = USB_SPEED_FULL; ++ break; ++ case PORTSCX_PORT_SPEED_LOW: ++ udc->gadget.speed = USB_SPEED_LOW; ++ break; ++ default: ++ udc->gadget.speed = USB_SPEED_UNKNOWN; ++ break; ++ } ++ } ++ ++ /* Update USB state */ ++ if (!udc->resume_state) ++ udc->usb_state = USB_STATE_DEFAULT; ++} ++ ++/* Process suspend interrupt */ ++static void suspend_irq(struct fsl_udc *udc) ++{ ++ udc->resume_state = udc->usb_state; ++ udc->usb_state = USB_STATE_SUSPENDED; ++ ++ /* report suspend to the driver, serial.c does not support this */ ++ if (udc->driver->suspend) ++ udc->driver->suspend(&udc->gadget); ++} ++ ++static void bus_resume(struct fsl_udc *udc) ++{ ++ udc->usb_state = udc->resume_state; ++ udc->resume_state = 0; ++ ++ /* report resume to the driver, serial.c does not support this */ ++ if (udc->driver->resume) ++ udc->driver->resume(&udc->gadget); ++} ++ ++/* Clear up all ep queues */ ++static int reset_queues(struct fsl_udc *udc) ++{ ++ u8 pipe; ++ ++ for (pipe = 0; pipe < udc->max_pipes; pipe++) ++ udc_reset_ep_queue(udc, pipe); ++ ++ /* report disconnect; the driver is already quiesced */ ++ udc->driver->disconnect(&udc->gadget); ++ ++ return 0; ++} ++ ++/* Process reset interrupt */ ++static void reset_irq(struct fsl_udc *udc) ++{ ++ u32 temp; ++ unsigned long timeout; ++ ++ /* Clear the device address */ ++ temp = fsl_readl(&dr_regs->deviceaddr); ++ fsl_writel(temp & ~USB_DEVICE_ADDRESS_MASK, &dr_regs->deviceaddr); ++ ++ udc->device_address = 0; ++ ++ /* Clear usb state */ ++ udc->resume_state = 0; ++ udc->ep0_dir = 0; ++ udc->ep0_state = WAIT_FOR_SETUP; ++ udc->remote_wakeup = 0; /* default to 0 on reset */ ++ udc->gadget.b_hnp_enable = 0; ++ udc->gadget.a_hnp_support = 0; ++ udc->gadget.a_alt_hnp_support = 0; ++ ++ /* Clear all the setup token semaphores */ ++ temp = fsl_readl(&dr_regs->endptsetupstat); ++ fsl_writel(temp, &dr_regs->endptsetupstat); ++ ++ /* Clear all the endpoint complete status bits */ ++ temp = fsl_readl(&dr_regs->endptcomplete); ++ fsl_writel(temp, &dr_regs->endptcomplete); ++ ++ timeout = jiffies + 100; ++ while (fsl_readl(&dr_regs->endpointprime)) { ++ /* Wait until all endptprime bits cleared */ ++ if (time_after(jiffies, timeout)) { ++ ERR("Timeout for reset\n"); ++ break; ++ } ++ cpu_relax(); ++ } ++ ++ /* Write 1s to the flush register */ ++ fsl_writel(0xffffffff, &dr_regs->endptflush); ++ ++ if (fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET) { ++ VDBG("Bus reset"); ++ /* Bus is reseting */ ++ udc->bus_reset = 1; ++ /* Reset all the queues, include XD, dTD, EP queue ++ * head and TR Queue */ ++ reset_queues(udc); ++ udc->usb_state = USB_STATE_DEFAULT; ++ } else { ++ VDBG("Controller reset"); ++ /* initialize usb hw reg except for regs for EP, not ++ * touch usbintr reg */ ++ dr_controller_setup(udc); ++ ++ /* Reset all internal used Queues */ ++ reset_queues(udc); ++ ++ ep0_setup(udc); ++ ++ /* Enable DR IRQ reg, Set Run bit, change udc state */ ++ dr_controller_run(udc); ++ udc->usb_state = USB_STATE_ATTACHED; ++ } ++} ++ ++/* ++ * USB device controller interrupt handler ++ */ ++static irqreturn_t fsl_udc_irq(int irq, void *_udc) ++{ ++ struct fsl_udc *udc = _udc; ++ u32 irq_src; ++ irqreturn_t status = IRQ_NONE; ++ unsigned long flags; ++ ++ /* Disable ISR for OTG host mode */ ++ if (udc->stopped) ++ return IRQ_NONE; ++ spin_lock_irqsave(&udc->lock, flags); ++ irq_src = fsl_readl(&dr_regs->usbsts) & fsl_readl(&dr_regs->usbintr); ++ /* Clear notification bits */ ++ fsl_writel(irq_src, &dr_regs->usbsts); ++ ++ VDBG("irq_src [0x%8x] portsc=0x%x", irq_src, ++ fsl_readl(&dr_regs->portsc1)); ++ ++ /* Need to resume? */ ++ if (udc->usb_state == USB_STATE_SUSPENDED) ++ if ((fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_SUSPEND) == 0) ++ bus_resume(udc); ++ ++ /* USB Interrupt */ ++ if (irq_src & USB_STS_INT) { ++ VDBG("Packet int"); ++ /* Setup package, we only support ep0 as control ep */ ++ if (fsl_readl(&dr_regs->endptsetupstat) & EP_SETUP_STATUS_EP0) { ++ tripwire_handler(udc, 0, ++ (u8 *) (&udc->local_setup_buff)); ++ setup_received_irq(udc, &udc->local_setup_buff); ++ status = IRQ_HANDLED; ++ } ++ ++ /* completion of dtd */ ++ if (fsl_readl(&dr_regs->endptcomplete)) { ++ dtd_complete_irq(udc); ++ status = IRQ_HANDLED; ++ } ++ } ++ ++ /* SOF (for ISO transfer) */ ++ if (irq_src & USB_STS_SOF) { ++ status = IRQ_HANDLED; ++ } ++ ++ /* Port Change */ ++ if (irq_src & USB_STS_PORT_CHANGE) { ++ port_change_irq(udc); ++ status = IRQ_HANDLED; ++ } ++ ++ /* Reset Received */ ++ if (irq_src & USB_STS_RESET) { ++ reset_irq(udc); ++ status = IRQ_HANDLED; ++ } ++ ++ /* Sleep Enable (Suspend) */ ++ if (irq_src & USB_STS_SUSPEND) { ++ suspend_irq(udc); ++ status = IRQ_HANDLED; ++ } ++ ++ if (irq_src & (USB_STS_ERR | USB_STS_SYS_ERR)) { ++ VDBG("Error IRQ %x ", irq_src); ++ } ++ ++ spin_unlock_irqrestore(&udc->lock, flags); ++ return status; ++} ++ ++/*----------------------------------------------------------------* ++ * Hook to gadget drivers ++ * Called by initialization code of gadget drivers ++*----------------------------------------------------------------*/ ++int usb_gadget_register_driver(struct usb_gadget_driver *driver) ++{ ++ int retval = -ENODEV; ++ unsigned long flags = 0; ++ struct fsl_udc *udc = udc_controller; ++ ++ pr_debug("udc: udc=0x%p\n", udc); ++ ++ if (!udc) ++ return -ENODEV; ++ ++ if (!driver || (driver->speed != USB_SPEED_FULL ++ && driver->speed != USB_SPEED_HIGH) ++ || !driver->bind || !driver->disconnect ++ || !driver->setup) ++ return -EINVAL; ++ ++ if (udc->driver) ++ return -EBUSY; ++ ++ /* lock is needed but whether should use this lock or another */ ++ spin_lock_irqsave(&udc->lock, flags); ++ ++ driver->driver.bus = 0; ++ udc->softconnect = 1; ++ /* hook up the driver */ ++ udc->driver = driver; ++ udc->gadget.dev.driver = &driver->driver; ++ spin_unlock_irqrestore(&udc->lock, flags); ++ ++ /* bind udc driver to gadget driver */ ++ retval = driver->bind(&udc->gadget); ++ if (retval) { ++ pr_debug("bind to %s --> %d\n", driver->driver.name, retval); ++ udc->gadget.dev.driver = 0; ++ udc->driver = 0; ++ goto out; ++ } ++ ++ /* Enable DR IRQ reg and Set usbcmd reg Run bit */ ++ if (udc->transceiver) { ++ /* Suspend the controller until OTG enables it */ ++ udc_suspend(udc); ++ pr_debug("udc: suspend udc for OTG auto detect \n"); ++ ++ /* Export udc suspend/resume call to OTG */ ++ udc->gadget.dev.parent->driver->suspend = fsl_udc_suspend; ++ udc->gadget.dev.parent->driver->resume = fsl_udc_resume; ++ ++ retval = otg_set_peripheral(udc->transceiver, &udc->gadget); ++ if (retval < 0) { ++ printk(KERN_ERR "can't bind to transceiver\n"); ++ driver->unbind(&udc->gadget); ++ udc->gadget.dev.driver = 0; ++ udc->driver = 0; ++ return retval; ++ } ++ } else { ++ /* Enable DR IRQ reg and Set usbcmd reg Run bit */ ++ dr_controller_run(udc); ++ udc->usb_state = USB_STATE_ATTACHED; ++ udc->ep0_state = WAIT_FOR_SETUP; ++ pr_debug("udc: ep0_state now WAIT_FOR_SETUP\n"); ++ udc->ep0_dir = 0; ++ } ++ ++ printk(KERN_INFO "%s: bind to driver %s \n", udc->gadget.name, ++ driver->driver.name); ++ ++out: ++ return retval; ++} ++EXPORT_SYMBOL(usb_gadget_register_driver); ++ ++/* Disconnect from gadget driver */ ++int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) ++{ ++ struct fsl_ep *loop_ep; ++ unsigned long flags; ++ ++ if (!udc_controller) ++ return -ENODEV; ++ ++ if (!driver || driver != udc_controller->driver || !driver->unbind) ++ return -EINVAL; ++ ++#ifdef CONFIG_USB_OTG ++ if (udc_controller->transceiver) ++ (void)otg_set_peripheral(udc_controller->transceiver, 0); ++#endif ++ ++ /* stop DR, disable intr */ ++ dr_controller_stop(udc_controller); ++ ++ /* in fact, no needed */ ++ udc_controller->usb_state = USB_STATE_ATTACHED; ++ udc_controller->ep0_state = WAIT_FOR_SETUP; ++ udc_controller->ep0_dir = 0; ++ ++ /* stand operation */ ++ spin_lock_irqsave(&udc_controller->lock, flags); ++ udc_controller->gadget.speed = USB_SPEED_UNKNOWN; ++ nuke(&udc_controller->eps[0], -ESHUTDOWN); ++ list_for_each_entry(loop_ep, &udc_controller->gadget.ep_list, ++ ep.ep_list) ++ nuke(loop_ep, -ESHUTDOWN); ++ spin_unlock_irqrestore(&udc_controller->lock, flags); ++ ++ /* unbind gadget and unhook driver. */ ++ driver->unbind(&udc_controller->gadget); ++ udc_controller->gadget.dev.driver = 0; ++ udc_controller->driver = 0; ++ ++ printk(KERN_INFO "unregistered gadget '%s'\n", driver->driver.name); ++ return 0; ++} ++EXPORT_SYMBOL(usb_gadget_unregister_driver); ++ ++/*------------------------------------------------------------------------- ++ PROC File System Support ++-------------------------------------------------------------------------*/ ++#ifdef CONFIG_USB_GADGET_DEBUG_FILES ++ ++#include <linux/seq_file.h> ++ ++static const char proc_filename[] = "driver/fsl_usb2_udc"; ++ ++static int fsl_proc_read(char *page, char **start, off_t off, int count, ++ int *eof, void *_dev) ++{ ++ char *buf = page; ++ char *next = buf; ++ unsigned size = count; ++ unsigned long flags; ++ int t, i; ++ u32 tmp_reg; ++ struct fsl_ep *ep = NULL; ++ struct fsl_req *req; ++ ++ struct fsl_udc *udc = udc_controller; ++ if (off != 0) ++ return 0; ++ ++ spin_lock_irqsave(&udc->lock, flags); ++ ++ /* ------basic driver infomation ---- */ ++ t = scnprintf(next, size, ++ DRIVER_DESC "\n" ++ "%s version: %s\n" ++ "Gadget driver: %s\n\n", ++ driver_name, DRIVER_VERSION, ++ udc->driver ? udc->driver->driver.name : "(none)"); ++ size -= t; ++ next += t; ++ ++ /* ------ DR Registers ----- */ ++ tmp_reg = fsl_readl(&dr_regs->usbcmd); ++ t = scnprintf(next, size, ++ "USBCMD reg: 0x%08x\n" ++ "\tSetupTW: %d\n" ++ "\tRun/Stop: %s\n\n", ++ tmp_reg, ++ (tmp_reg & USB_CMD_SUTW) ? 1 : 0, ++ (tmp_reg & USB_CMD_RUN_STOP) ? "Run" : "Stop"); ++ size -= t; ++ next += t; ++ ++ tmp_reg = fsl_readl(&dr_regs->usbsts); ++ t = scnprintf(next, size, ++ "USB Status Reg: 0x%08x\n" ++ "\tDr Suspend: %d Reset Received: %d " ++ "System Error: %s USB Error Interrupt: %s\n\n", ++ tmp_reg, ++ (tmp_reg & USB_STS_SUSPEND) ? 1 : 0, ++ (tmp_reg & USB_STS_RESET) ? 1 : 0, ++ (tmp_reg & USB_STS_SYS_ERR) ? "Err" : "Normal", ++ (tmp_reg & USB_STS_ERR) ? "Err detected" : "No err"); ++ size -= t; ++ next += t; ++ ++ tmp_reg = fsl_readl(&dr_regs->usbintr); ++ t = scnprintf(next, size, ++ "USB Interrupt Enable Reg: 0x%08x\n" ++ "\tSleep Enable: %d SOF Received Enable: %d " ++ "Reset Enable: %d\n" ++ "\tSystem Error Enable: %d " ++ "Port Change Dectected Enable: %d\n" ++ "\tUSB Error Intr Enable: %d USB Intr Enable: %d\n\n", ++ tmp_reg, ++ (tmp_reg & USB_INTR_DEVICE_SUSPEND) ? 1 : 0, ++ (tmp_reg & USB_INTR_SOF_EN) ? 1 : 0, ++ (tmp_reg & USB_INTR_RESET_EN) ? 1 : 0, ++ (tmp_reg & USB_INTR_SYS_ERR_EN) ? 1 : 0, ++ (tmp_reg & USB_INTR_PTC_DETECT_EN) ? 1 : 0, ++ (tmp_reg & USB_INTR_ERR_INT_EN) ? 1 : 0, ++ (tmp_reg & USB_INTR_INT_EN) ? 1 : 0); ++ size -= t; ++ next += t; ++ ++ tmp_reg = fsl_readl(&dr_regs->frindex); ++ t = scnprintf(next, size, ++ "USB Frame Index Reg: Frame Number is 0x%x\n\n", ++ (tmp_reg & USB_FRINDEX_MASKS)); ++ size -= t; ++ next += t; ++ ++ tmp_reg = fsl_readl(&dr_regs->deviceaddr); ++ t = scnprintf(next, size, ++ "USB Device Address Reg: Device Addr is 0x%x\n\n", ++ (tmp_reg & USB_DEVICE_ADDRESS_MASK)); ++ size -= t; ++ next += t; ++ ++ tmp_reg = fsl_readl(&dr_regs->endpointlistaddr); ++ t = scnprintf(next, size, ++ "USB Endpoint List Address Reg:" ++ "Device Addr is 0x%x\n\n", ++ (tmp_reg & USB_EP_LIST_ADDRESS_MASK)); ++ size -= t; ++ next += t; ++ ++ tmp_reg = fsl_readl(&dr_regs->portsc1); ++ t = scnprintf(next, size, ++ "USB Port Status&Control Reg:\n" ++ "\tPort Transceiver Type : %s" "Port Speed: %s \n" ++ "\tPHY Low Power Suspend: %s" "Port Reset: %s " ++ "Port Suspend Mode: %s \n" "\tOver-current Change: %s " ++ "Port Enable/Disable Change: %s\n" ++ "\tPort Enabled/Disabled: %s" ++ "Current Connect Status: %s\n\n", ( { ++ char *s; ++ switch (tmp_reg & PORTSCX_PTS_FSLS) { ++ case PORTSCX_PTS_UTMI: ++ s = "UTMI"; break; ++ case PORTSCX_PTS_ULPI: ++ s = "ULPI "; break; ++ case PORTSCX_PTS_FSLS: ++ s = "FS/LS Serial"; break; ++ default: ++ s = "None"; break; ++ } ++ s; } ), ( { ++ char *s; ++ switch (tmp_reg & PORTSCX_PORT_SPEED_UNDEF) { ++ case PORTSCX_PORT_SPEED_FULL: ++ s = "Full Speed"; break; ++ case PORTSCX_PORT_SPEED_LOW: ++ s = "Low Speed"; break; ++ case PORTSCX_PORT_SPEED_HIGH: ++ s = "High Speed"; break; ++ default: ++ s = "Undefined"; break; ++ } ++ s; ++ } ), ++ (tmp_reg & PORTSCX_PHY_LOW_POWER_SPD) ? ++ "Normal PHY mode" : "Low power mode", ++ (tmp_reg & PORTSCX_PORT_RESET) ? "In Reset" : ++ "Not in Reset", ++ (tmp_reg & PORTSCX_PORT_SUSPEND) ? "In " : "Not in", ++ (tmp_reg & PORTSCX_OVER_CURRENT_CHG) ? "Dected" : ++ "No", ++ (tmp_reg & PORTSCX_PORT_EN_DIS_CHANGE) ? "Disable" : ++ "Not change", ++ (tmp_reg & PORTSCX_PORT_ENABLE) ? "Enable" : ++ "Not correct", ++ (tmp_reg & PORTSCX_CURRENT_CONNECT_STATUS) ? ++ "Attached" : "Not-Att"); ++ size -= t; ++ next += t; ++ ++ tmp_reg = fsl_readl(&dr_regs->usbmode); ++ t = scnprintf(next, size, ++ "USB Mode Reg:" "Controller Mode is : %s\n\n", ( { ++ char *s; ++ switch (tmp_reg & USB_MODE_CTRL_MODE_HOST) { ++ case USB_MODE_CTRL_MODE_IDLE: ++ s = "Idle"; break; ++ case USB_MODE_CTRL_MODE_DEVICE: ++ s = "Device Controller"; break; ++ case USB_MODE_CTRL_MODE_HOST: ++ s = "Host Controller"; break; ++ default: ++ s = "None"; break; ++ } ++ s; ++ } )); ++ size -= t; ++ next += t; ++ ++ tmp_reg = fsl_readl(&dr_regs->endptsetupstat); ++ t = scnprintf(next, size, ++ "Endpoint Setup Status Reg:" "SETUP on ep 0x%x\n\n", ++ (tmp_reg & EP_SETUP_STATUS_MASK)); ++ size -= t; ++ next += t; ++ ++ for (i = 0; i < udc->max_ep / 2; i++) { ++ tmp_reg = fsl_readl(&dr_regs->endptctrl[i]); ++ t = scnprintf(next, size, "EP Ctrl Reg [0x%x]: = [0x%x]\n", ++ i, tmp_reg); ++ size -= t; ++ next += t; ++ } ++ tmp_reg = fsl_readl(&dr_regs->endpointprime); ++ t = scnprintf(next, size, "EP Prime Reg = [0x%x]\n", tmp_reg); ++ size -= t; ++ next += t; ++ ++#ifdef HAVE_SYS_REGS ++ tmp_reg = usb_sys_regs->snoop1; ++ t = scnprintf(next, size, "\nSnoop1 Reg : = [0x%x]\n\n", tmp_reg); ++ size -= t; ++ next += t; ++ ++ tmp_reg = usb_sys_regs->control; ++ t = scnprintf(next, size, "General Control Reg : = [0x%x]\n\n", ++ tmp_reg); ++ size -= t; ++ next += t; ++#endif ++ ++ /* ------fsl_udc, fsl_ep, fsl_request structure information ----- */ ++ ep = &udc->eps[0]; ++ t = scnprintf(next, size, "For %s Maxpkt is 0x%x index is 0x%x\n", ++ ep->ep.name, ep_maxpacket(ep), ep_index(ep)); ++ size -= t; ++ next += t; ++ ++ if (list_empty(&ep->queue)) { ++ t = scnprintf(next, size, "its req queue is empty\n\n"); ++ size -= t; ++ next += t; ++ } else { ++ list_for_each_entry(req, &ep->queue, queue) { ++ t = scnprintf(next, size, ++ "req %p actual 0x%x length 0x%x buf %p\n", ++ &req->req, req->req.actual, ++ req->req.length, req->req.buf); ++ size -= t; ++ next += t; ++ } ++ } ++ /* other gadget->eplist ep */ ++ list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) { ++ if (ep->desc) { ++ t = scnprintf(next, size, ++ "\nFor %s Maxpkt is 0x%x " ++ "index is 0x%x\n", ++ ep->ep.name, ep_maxpacket(ep), ++ ep_index(ep)); ++ size -= t; ++ next += t; ++ ++ if (list_empty(&ep->queue)) { ++ t = scnprintf(next, size, ++ "its req queue is empty\n\n"); ++ size -= t; ++ next += t; ++ } else { ++ list_for_each_entry(req, &ep->queue, queue) { ++ t = scnprintf(next, size, ++ "req %p actual 0x%x length" ++ "0x%x buf %p\n", ++ &req->req, req->req.actual, ++ req->req.length, req->req.buf); ++ size -= t; ++ next += t; ++ } /* end for each_entry of ep req */ ++ } /* end for else */ ++ } /* end for if(ep->queue) */ ++ } /* end (ep->desc) */ ++ ++ spin_unlock_irqrestore(&udc->lock, flags); ++ ++ *eof = 1; ++ return count - size; ++} ++ ++#define create_proc_file() create_proc_read_entry(proc_filename, \ ++ 0, NULL, fsl_proc_read, NULL) ++ ++#define remove_proc_file() remove_proc_entry(proc_filename, NULL) ++ ++#else /* !CONFIG_USB_GADGET_DEBUG_FILES */ ++ ++#define create_proc_file() do {} while (0) ++#define remove_proc_file() do {} while (0) ++ ++#endif /* CONFIG_USB_GADGET_DEBUG_FILES */ ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* Release udc structures */ ++static void fsl_udc_release(struct device *dev) ++{ ++ complete(udc_controller->done); ++ dma_free_coherent(dev, udc_controller->ep_qh_size, ++ udc_controller->ep_qh, udc_controller->ep_qh_dma); ++ kfree(udc_controller); ++} ++ ++/****************************************************************** ++ Internal structure setup functions ++*******************************************************************/ ++/*------------------------------------------------------------------ ++ * init resource for globle controller ++ * Return the udc handle on success or NULL on failure ++ ------------------------------------------------------------------*/ ++static struct fsl_udc *__init struct_udc_setup(struct platform_device *pdev) ++{ ++ struct fsl_udc *udc; ++ struct fsl_usb2_platform_data *pdata; ++ size_t size; ++ ++ udc = kzalloc(sizeof(struct fsl_udc), GFP_KERNEL); ++ if (udc == NULL) { ++ ERR("malloc udc failed\n"); ++ return NULL; ++ } ++ ++ pdata = pdev->dev.platform_data; ++ udc->phy_mode = pdata->phy_mode; /* DDD FIXME */ ++ ++ /* max_ep_nr is bidirectional ep number, max_ep doubles the number */ ++ udc->max_ep = pdata->max_ep_nr * 2; ++ ++ udc->eps = kzalloc(sizeof(struct fsl_ep) * udc->max_ep, GFP_KERNEL); ++ if (!udc->eps) { ++ ERR("malloc fsl_ep failed\n"); ++ goto cleanup; ++ } ++ ++ /* initialized QHs, take care of alignment */ ++ size = udc->max_ep * sizeof(struct ep_queue_head); ++ if (size < QH_ALIGNMENT) ++ size = QH_ALIGNMENT; ++ else if ((size % QH_ALIGNMENT) != 0) { ++ size += QH_ALIGNMENT + 1; ++ size &= ~(QH_ALIGNMENT - 1); ++ } ++ udc->ep_qh = dma_alloc_coherent(&pdev->dev, size, ++ &udc->ep_qh_dma, GFP_KERNEL); ++ if (!udc->ep_qh) { ++ ERR("malloc QHs for udc failed\n"); ++ kfree(udc->eps); ++ goto cleanup; ++ } ++ ++ udc->ep_qh_size = size; ++ ++ /* Initialize ep0 status request structure */ ++ udc->status_req = container_of(fsl_alloc_request(NULL, GFP_KERNEL), ++ struct fsl_req, req); ++ /* allocate a small amount of memory to get valid address */ ++ udc->status_req->req.buf = kmalloc(8, GFP_KERNEL); ++ udc->status_req->req.dma = virt_to_phys(udc->status_req->req.buf); ++ ++ udc->resume_state = USB_STATE_NOTATTACHED; ++ udc->usb_state = USB_STATE_POWERED; ++ udc->ep0_dir = 0; ++ udc->remote_wakeup = 0; /* default to 0 on reset */ ++ spin_lock_init(&udc->lock); ++ ++ return udc; ++ ++cleanup: ++ kfree(udc); ++ return NULL; ++} ++ ++/*---------------------------------------------------------------- ++ * Setup the fsl_ep struct for eps ++ * Link fsl_ep->ep to gadget->ep_list ++ * ep0out is not used so do nothing here ++ * ep0in should be taken care ++ *--------------------------------------------------------------*/ ++static int __init struct_ep_setup(struct fsl_udc *udc, unsigned char index, ++ char *name, int link) ++{ ++ struct fsl_ep *ep = &udc->eps[index]; ++ ++ ep->udc = udc; ++ strcpy(ep->name, name); ++ ep->ep.name = ep->name; ++ ++ ep->ep.ops = &fsl_ep_ops; ++ ep->stopped = 0; ++ ++ /* for ep0: maxP defined in desc ++ * for other eps, maxP is set by epautoconfig() called by gadget layer ++ */ ++ ep->ep.maxpacket = (unsigned short) ~0; ++ ++ /* the queue lists any req for this ep */ ++ INIT_LIST_HEAD(&ep->queue); ++ ++ /* gagdet.ep_list used for ep_autoconfig so no ep0 */ ++ if (link) ++ list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list); ++ ep->gadget = &udc->gadget; ++ ep->qh = &udc->ep_qh[index]; ++ ++ return 0; ++} ++ ++static int board_init(struct platform_device *pdev) ++{ ++ struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; ++ ++ pr_debug("udc: pdev=0x%p pdata=0x%p\n", pdev, pdata); ++ ++ /* ++ * do platform specific init: check the clock, grab/config pins, etc. ++ */ ++ if (pdata->platform_init && pdata->platform_init(pdev) != 0) ++ return -EINVAL; ++ ++ return 0; ++} ++ ++/* Driver probe functions */ ++ ++static int __init fsl_udc_probe(struct platform_device *pdev) ++{ ++ struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; ++ struct fsl_udc *udc; ++ unsigned int i; ++ struct otg_transceiver *transceiver = NULL; ++ int status = -ENODEV; ++ u32 id; ++ int irq_number; ++ u64 rsrc_start, rsrc_len; ++ int ret = -ENODEV; ++ ++ pr_debug("udc: pdev=0x%p pdata=0x%p\n", pdev, pdata); ++ ++ if (board_init(pdev) != 0) ++ return -EINVAL; ++ ++ /* Initialize the udc structure including QH member and other member */ ++ udc = (struct fsl_udc *) struct_udc_setup(pdev); ++ udc_controller = udc; ++ ++ if (!udc) { ++ ERR("udc is NULL \n"); ++ return -ENOMEM; ++ } ++ dev_set_drvdata(&pdev->dev, udc); ++ pr_debug("udc_controller=0x%p", udc_controller); ++ ++ udc->pdata = pdata; ++ udc->xcvr_type = pdata->xcvr_type; ++ ++#ifdef CONFIG_USB_OTG ++ udc->transceiver = otg_get_transceiver(); ++ pr_debug("udc: otg_get_transceiver returns 0x%p", udc->transceiver); ++#endif ++ ++ if (pdev->resource[1].flags != IORESOURCE_IRQ) ++ return -ENODEV; ++ ++ rsrc_start = pdev->resource[0].start; ++ rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1; ++ ++ pr_debug(" start=0x%ux end=0x%ux\n", ++ pdev->resource[0].start, pdev->resource[0].end); ++ pr_debug("rsrc_start=0x%llx rsrc_len=0x%llx\n", rsrc_start, rsrc_len); ++ ++ dr_regs = (struct fsl_usb_device_regs *)pdata->regs; ++ ++ pr_debug("udc: pdate=0x%p dr_regs=0x%p\n", pdata, dr_regs); ++ pr_debug("udc: hci_version=0x%x\n", dr_regs->hciversion); ++ pr_debug("udc: otgsc at 0x%p\n", &dr_regs->otgsc); ++ ++ id = fsl_readl(&dr_regs->id); ++ printk(KERN_INFO "FSL2 USBOTG h/w ID=0x%x revision=0x%x\n", ++ id & 0x3f, id >> 16); ++ ++ /* USB OTG module IRQ */ ++ irq_number = platform_get_irq(pdev, 0); ++ if (irq_number > 128) { ++ status = request_irq(irq_number, fsl_udc_irq, IRQF_SHARED, ++ driver_name, udc); ++ if (status) { ++ ERR("can't get irq %d, err=%d\n", irq_number, status); ++ goto err2; ++ } ++ } else { ++ status = -ENODEV; ++ goto err2; ++ } ++ ++ if (!udc->transceiver) { ++ /* initialize usb hw reg except for regs for EP, ++ * leave usbintr reg untouched*/ ++ dr_controller_setup(udc); ++ } ++ ++ /* here comes the stand operations for probe ++ * set the fsl_udc->gadget.xxx ++ */ ++ udc->gadget.ops = &fsl_gadget_ops; ++ udc->gadget.is_dualspeed = 1; ++ ++ /* gadget.ep0 is a pointer */ ++ udc->gadget.ep0 = &udc->eps[0].ep; ++ INIT_LIST_HEAD(&udc->gadget.ep_list); ++ udc->gadget.speed = USB_SPEED_UNKNOWN; ++ udc->gadget.name = driver_name; ++ ++ /* Setup gadget.dev and register with kernel */ ++ strcpy(udc->gadget.dev.bus_id, "gadget"); ++ udc->gadget.dev.release = fsl_udc_release; ++ udc->gadget.dev.parent = &pdev->dev; ++ ++ ret = device_register(&udc->gadget.dev); ++ if (ret < 0) ++ goto err3; ++ ++ if (udc->transceiver) ++ udc->gadget.is_otg = 1; ++ ++ /* setup QH and epctrl for ep0 */ ++ ep0_setup(udc); ++ ++ /* setup udc->eps[] for ep0 */ ++ struct_ep_setup(udc_controller, 0, "ep0", 0); ++ /* for ep0: the desc defined here; ++ * for other eps, gadget layer called ep_enable with defined desc ++ */ ++ udc->eps[0].desc = &fsl_ep0_desc; ++ udc->eps[0].ep.maxpacket = USB_MAX_CTRL_PAYLOAD; ++ ++ /* setup the udc->eps[] for non-control endpoints and link ++ * to gadget.ep_list */ ++ for (i = 1; i < (int)(udc->max_ep / 2); i++) { ++ char name[14]; ++ ++ sprintf(name, "ep%dout", i); ++ struct_ep_setup(udc, i * 2, name, 1); ++ sprintf(name, "ep%din", i); ++ struct_ep_setup(udc, i * 2 + 1, name, 1); ++ } ++ ++ /* use dma_pool for TD management */ ++ udc_controller->td_pool = dma_pool_create("udc_td", &pdev->dev, ++ sizeof(struct ep_td_struct), ++ DTD_ALIGNMENT, UDC_DMA_BOUNDARY); ++ if (udc->td_pool == NULL) { ++ ret = -ENOMEM; ++ goto err4; ++ } ++ ++ create_proc_file(); ++ return 0; ++ ++err4: ++ device_unregister(&udc_controller->gadget.dev); ++err3: ++ free_irq(udc_controller->irq, udc_controller); ++err2: ++ kfree(udc); ++ if (transceiver) ++ put_device(transceiver->dev); ++ release_mem_region(pdev->resource[0].start, ++ pdev->resource[0].end - pdev->resource[0].start + 1); ++ return status; ++ ++} ++ ++/* Driver removal functions ++ * Free resources ++ * Finish pending transaction ++ */ ++static int __exit fsl_udc_remove(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct fsl_udc *udc = (struct fsl_udc *)dev_get_drvdata(dev); ++ struct fsl_usb2_platform_data *pdata; ++ int irq_number; ++ ++ DECLARE_COMPLETION(done); ++ ++ pdata = pdev->dev.platform_data; ++ ++ if (!udc) ++ return -ENODEV; ++ ++ udc->done = &done; ++ ++ /* DR has been stopped in usb_gadget_unregister_driver() */ ++ ++ if (udc->transceiver) { ++ put_device(udc->transceiver->dev); ++ udc->transceiver = NULL; ++ } ++ ++ /* remove proc */ ++ remove_proc_file(); ++ ++ /* free irq */ ++ irq_number = udc->irq; ++ free_irq(pdev->resource[1].start, udc); ++ udc->irq = 0; ++ ++ /* Free allocated memory */ ++ kfree(udc->status_req->req.buf); ++ kfree(udc->status_req); ++ kfree(udc_controller->eps); ++ ++ dma_pool_destroy(udc_controller->td_pool); ++ /* deinitlaize all ep: strcut */ ++ /* deinitialize ep0: reg and QH */ ++ ++ device_unregister(&udc->gadget.dev); ++ /* free udc --wait for the release() finished */ ++ wait_for_completion(&done); ++ ++ /* ++ * do platform specific un-initialization: ++ * release iomux pins, etc. ++ */ ++ if (pdata->platform_uninit) ++ pdata->platform_uninit(pdev); ++ ++ return 0; ++} ++ ++static int udc_suspend(struct fsl_udc *udc) ++{ ++ udc->stopped = 1; ++ return 0; ++} ++ ++/* ++ * Modify Power management attributes ++ * Used by OTG statemachine to disable gadget temporarily ++ * Here we stop the DR controller and disable the irq ++ * @param dev device controller pointer ++ * @param state current state ++ * @return The function returns 0 on success or -1 if failed ++ */ ++static int fsl_udc_suspend(struct device *dev, pm_message_t state) ++{ ++ struct fsl_udc *udc = (struct fsl_udc *)dev_get_drvdata(dev); ++ pr_debug("udc: Suspend. state=%d\n", state.event); ++ return udc_suspend(udc); ++} ++ ++static int udc_resume(struct fsl_udc *udc) ++{ ++ /*Enable DR irq reg and set controller Run */ ++ if (udc->stopped) { ++ dr_controller_setup(udc); ++ dr_controller_run(udc); ++ } ++ udc->usb_state = USB_STATE_ATTACHED; ++ udc->ep0_state = WAIT_FOR_SETUP; ++ udc->ep0_dir = 0; ++ return 0; ++} ++ ++/* ++ * Invoked on USB resume. May be called in_interrupt. ++ * Here we start the DR controller and enable the irq ++ * @param dev device controller pointer ++ * @return The function returns 0 on success or -1 if failed ++ */ ++static int fsl_udc_resume(struct device *dev) ++{ ++ struct fsl_udc *udc = (struct fsl_udc *)dev_get_drvdata(dev); ++ pr_debug("udc: Resume dev=0x%p udc=0x%p\n", dev, udc); ++ ++ return udc_resume(udc); ++} ++ ++/*------------------------------------------------------------------------- ++ Register entry point for the peripheral controller driver ++--------------------------------------------------------------------------*/ ++static struct platform_driver udc_driver = { ++ .probe = fsl_udc_probe, ++ .remove = __exit_p(fsl_udc_remove), ++ .driver = { ++ .name = (char *)driver_name, ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init udc_init(void) ++{ ++ printk(KERN_INFO "%s version %s init \n", driver_desc, DRIVER_VERSION); ++ return platform_driver_register(&udc_driver); ++} ++ ++module_init(udc_init); ++ ++static void __exit udc_exit(void) ++{ ++ platform_driver_unregister(&udc_driver); ++ printk(KERN_INFO "%s unregistered \n", driver_desc); ++} ++ ++module_exit(udc_exit); ++ ++MODULE_DESCRIPTION(DRIVER_DESC); ++MODULE_AUTHOR(DRIVER_AUTHOR); ++MODULE_LICENSE("GPL"); +--- /dev/null ++++ b/drivers/usb/host/ehci-arc.c +@@ -0,0 +1,436 @@ ++/* ++ * drivers/usb/host/ehci-arc.c ++ * ++ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. ++ */ ++ ++/* ++ * The code contained herein is licensed under the GNU General Public ++ * License. You may obtain a copy of the GNU General Public License ++ * Version 2 or later at the following locations: ++ * ++ * http://www.opensource.org/licenses/gpl-license.html ++ * http://www.gnu.org/copyleft/gpl.html ++ */ ++ ++/* Note: this file is #included by ehci-hcd.c */ ++ ++#include <linux/platform_device.h> ++#include <linux/usb/fsl_usb2.h> ++#include <linux/fsl_devices.h> ++#include <linux/usb/otg.h> ++ ++#include "ehci-fsl.h" ++ ++ ++/* FIXME: Power Managment is un-ported so temporarily disable it */ ++#undef CONFIG_PM ++ ++/* PCI-based HCs are common, but plenty of non-PCI HCs are used too */ ++ ++/* configure so an HC device and id are always provided */ ++/* always called with process context; sleeping is OK */ ++ ++/** ++ * usb_hcd_fsl_probe - initialize FSL-based HCDs ++ * @drvier: Driver to be used for this HCD ++ * @pdev: USB Host Controller being probed ++ * Context: !in_interrupt() ++ * ++ * Allocates basic resources for this USB host controller. ++ * ++ */ ++static int usb_hcd_fsl_probe(const struct hc_driver *driver, ++ struct platform_device *pdev) ++{ ++ struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; ++ struct usb_hcd *hcd; ++ struct resource *res; ++ int irq; ++ int retval; ++ ++ pr_debug("initializing FSL-SOC USB Controller\n"); ++ ++ /* Need platform data for setup */ ++ if (!pdata) { ++ dev_err(&pdev->dev, ++ "No platform data for %s.\n", pdev->dev.bus_id); ++ return -ENODEV; ++ } ++ ++ retval = fsl_platform_verify(pdev); ++ if (retval) ++ return retval; ++ ++ /* ++ * do platform specific init: check the clock, grab/config pins, etc. ++ */ ++ if (pdata->platform_init && pdata->platform_init(pdev)) { ++ retval = -ENODEV; ++ goto err1; ++ } ++ ++ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); ++ if (!res) { ++ dev_err(&pdev->dev, ++ "Found HC with no IRQ. Check %s setup!\n", ++ pdev->dev.bus_id); ++ return -ENODEV; ++ } ++ irq = res->start; ++ ++ fsl_platform_set_vbus_power(pdev, 1); ++ ++ hcd = usb_create_hcd(driver, &pdev->dev, pdev->dev.bus_id); ++ if (!hcd) { ++ retval = -ENOMEM; ++ goto err1; ++ } ++ ++ if (pdata->regs) { ++ pr_debug("REGS: using pdata->regs (0x%p)\n", pdata->regs); ++ hcd->regs = pdata->regs; ++ hcd->rsrc_start = pdata->r_start; ++ hcd->rsrc_len = pdata->r_len; ++ } else { ++ pr_debug("REGS: NO pdata->regs\n"); ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!res) { ++ dev_err(&pdev->dev, "Found HC with no register addr. " ++ "Check %s setup!\n", pdev->dev.bus_id); ++ retval = -ENODEV; ++ goto err2; ++ } ++ hcd->rsrc_start = res->start; ++ hcd->rsrc_len = res->end - res->start + 1; ++ ++ /* ++ printk("DDD %s(): rsrc_start=0x%llx rsrc_len=0x%llx " ++ "pdata=0x%p\n", __FUNCTION__, ++ hcd->rsrc_start, hcd->rsrc_len, pdata); ++ */ ++ ++ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, ++ driver->description)) { ++ dev_dbg(&pdev->dev, "request_mem_region failed\n"); ++ retval = -EBUSY; ++ goto err2; ++ } ++ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); ++ ++ if (hcd->regs == NULL) { ++ dev_dbg(&pdev->dev, "error mapping memory\n"); ++ retval = -EFAULT; ++ goto err3; ++ } ++ } ++ hcd->power_budget = pdata->power_budget; ++ ++ /* DDD ++ * the following must be done by this point, otherwise the OTG ++ * host port doesn't make it thru initializtion. ++ * ehci_halt(), called by ehci_fsl_setup() returns -ETIMEDOUT ++ */ ++ fsl_platform_set_host_mode(hcd); ++ ++ retval = usb_add_hcd(hcd, irq, IRQF_SHARED); ++ if (retval != 0) ++ goto err4; ++ ++#if defined(CONFIG_USB_OTG) ++ if (pdata->does_otg) { ++ struct ehci_hcd *ehci = hcd_to_ehci(hcd); ++ ++ ehci->transceiver = otg_get_transceiver(); ++ ++ if (ehci->transceiver) { ++ retval = otg_set_host(ehci->transceiver, ++ &ehci_to_hcd(ehci)->self); ++ if (retval) { ++ if (ehci->transceiver) ++ put_device(ehci->transceiver->dev); ++ goto err3; ++ } ++ } else { ++ printk(KERN_ERR "can't find transceiver\n"); ++ retval = -ENODEV; ++ goto err3; ++ } ++ } ++#endif ++ ++ return retval; ++ ++err4: ++ /* DDD only if we did the iomap() iounmap(hcd->regs); */ ++err3: ++ /* DDD only if we did a request_ ++ * release_mem_region(hcd->rsrc_start, hcd->rsrc_len); ++ */ ++err2: ++ usb_put_hcd(hcd); ++err1: ++ dev_err(&pdev->dev, "init %s fail, %d\n", pdev->dev.bus_id, retval); ++ if (pdata->platform_uninit) ++ pdata->platform_uninit(pdev); ++ return retval; ++} ++ ++/* may be called without controller electrically present */ ++/* may be called with controller, bus, and devices active */ ++ ++/** ++ * usb_hcd_fsl_remove - shutdown processing for FSL-based HCDs ++ * @dev: USB Host Controller being removed ++ * Context: !in_interrupt() ++ * ++ * Reverses the effect of usb_hcd_fsl_probe(). ++ * ++ */ ++static void usb_hcd_fsl_remove(struct usb_hcd *hcd, ++ struct platform_device *pdev) ++{ ++ struct ehci_hcd *ehci = hcd_to_ehci(hcd); ++ struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; ++ ++ /* DDD shouldn't we turn off the power here? */ ++ fsl_platform_set_vbus_power(pdev, 0); ++ ++ usb_remove_hcd(hcd); ++ ++ if (ehci->transceiver) { ++ (void)otg_set_host(ehci->transceiver, 0); ++ put_device(ehci->transceiver->dev); ++ } ++ usb_put_hcd(hcd); ++ ++ /* ++ * do platform specific un-initialization: ++ * release iomux pins, etc. ++ */ ++ if (pdata->platform_uninit) ++ pdata->platform_uninit(pdev); ++} ++ ++/* called after powerup, by probe or system-pm "wakeup" */ ++static int ehci_fsl_reinit(struct ehci_hcd *ehci) ++{ ++ fsl_platform_usb_setup(ehci_to_hcd(ehci)); ++ ehci_port_power(ehci, 0); ++ ++ return 0; ++} ++ ++/* called during probe() after chip reset completes */ ++static int ehci_fsl_setup(struct usb_hcd *hcd) ++{ ++ struct ehci_hcd *ehci = hcd_to_ehci(hcd); ++ int retval; ++ struct fsl_usb2_platform_data *pdata; ++ pdata = hcd->self.controller-> platform_data; ++ ++ ehci->big_endian_desc = pdata->big_endian_desc; ++ ehci->big_endian_mmio = pdata->big_endian_mmio; ++ ++ /* EHCI registers start at offset 0x100 */ ++ ehci->caps = hcd->regs + 0x100; ++ ehci->regs = hcd->regs + 0x100 + ++ HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); ++ ++ pr_debug("%s(): ehci->caps=0x%p ehci->regs=0x%p\n", __FUNCTION__, ++ ehci->caps, ehci->regs); ++ ++ dbg_hcs_params(ehci, "reset"); ++ dbg_hcc_params(ehci, "reset"); ++ ++ /* cache this readonly data; minimize chip reads */ ++ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); ++ ++ retval = ehci_halt(ehci); ++ if (retval) ++ return retval; ++ ++ /* data structure init */ ++ retval = ehci_init(hcd); ++ if (retval) ++ return retval; ++ ++ ehci->is_tdi_rh_tt = 1; ++ ++ ehci->sbrn = 0x20; ++ ++ ehci_reset(ehci); ++ ++ retval = ehci_fsl_reinit(ehci); ++ return retval; ++} ++ ++static const struct hc_driver ehci_fsl_hc_driver = { ++ .description = hcd_name, ++ .product_desc = "Freescale On-Chip EHCI Host Controller", ++ .hcd_priv_size = sizeof(struct ehci_hcd), ++ ++ /* ++ * generic hardware linkage ++ */ ++ .irq = ehci_irq, ++ .flags = FSL_PLATFORM_HC_FLAGS, ++ ++ /* ++ * basic lifecycle operations ++ */ ++ .reset = ehci_fsl_setup, ++ .start = ehci_run, ++ .stop = ehci_stop, ++ .shutdown = ehci_shutdown, ++ ++ /* ++ * managing i/o requests and associated device resources ++ */ ++ .urb_enqueue = ehci_urb_enqueue, ++ .urb_dequeue = ehci_urb_dequeue, ++ .endpoint_disable = ehci_endpoint_disable, ++ ++ /* ++ * scheduling support ++ */ ++ .get_frame_number = ehci_get_frame, ++ ++ /* ++ * root hub support ++ */ ++ .hub_status_data = ehci_hub_status_data, ++ .hub_control = ehci_hub_control, ++ .bus_suspend = ehci_bus_suspend, ++ .bus_resume = ehci_bus_resume, ++}; ++ ++#ifdef CONFIG_USB_OTG ++/* ++ * Holding pen for all the EHCI registers except port_status, ++ * which is a zero element array and hence takes no space. ++ * The port_status register is saved in usb_ehci_portsc. ++ */ ++volatile static struct ehci_regs usb_ehci_regs; ++static u32 usb_ehci_portsc; ++ ++/* suspend/resume, section 4.3 */ ++ ++/* These routines rely on the bus (pci, platform, etc) ++ * to handle powerdown and wakeup, and currently also on ++ * transceivers that don't need any software attention to set up ++ * the right sort of wakeup. ++ * ++ * They're also used for turning on/off the port when doing OTG. ++ */ ++static int ehci_fsl_drv_suspend(struct platform_device *pdev, ++ pm_message_t message) ++{ ++ struct usb_hcd *hcd = platform_get_drvdata(pdev); ++ struct ehci_hcd *ehci = hcd_to_ehci(hcd); ++ u32 tmp; ++ ++ pr_debug("%s pdev=0x%p ehci=0x%p hcd=0x%p\n", ++ __FUNCTION__, pdev, ehci, hcd); ++ pr_debug("%s ehci->regs=0x%p hcd->regs=0x%p hcd->state=%d\n", ++ __FUNCTION__, ehci->regs, hcd->regs, hcd->state); ++ ++ hcd->state = HC_STATE_SUSPENDED; ++ pdev->dev.power.power_state = PMSG_SUSPEND; ++ ++ if (hcd->driver->suspend) ++ return hcd->driver->suspend(hcd, message); ++ ++ /* ignore non-host interrupts */ ++ clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); ++ ++ tmp = ehci_readl(ehci, &ehci->regs->command); ++ tmp &= ~CMD_RUN; ++ ehci_writel(ehci, tmp, &ehci->regs->command); ++ ++ memcpy((void *)&usb_ehci_regs, ehci->regs, sizeof(struct ehci_regs)); ++ usb_ehci_portsc = ehci_readl(ehci, &ehci->regs->port_status[0]); ++ ++ /* clear the W1C bits */ ++ usb_ehci_portsc &= cpu_to_hc32(ehci, ~PORT_RWC_BITS); ++ ++ fsl_platform_set_vbus_power(pdev, 0); ++ /* clear PP to cut power to the port */ ++ tmp = ehci_readl(ehci, &ehci->regs->port_status[0]); ++ tmp &= ~PORT_POWER; ++ ehci_writel(ehci, tmp, &ehci->regs->port_status[0]); ++ ++ return 0; ++} ++ ++static int ehci_fsl_drv_resume(struct platform_device *pdev) ++{ ++ struct usb_hcd *hcd = platform_get_drvdata(pdev); ++ struct ehci_hcd *ehci = hcd_to_ehci(hcd); ++ u32 tmp; ++ struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; ++ ++ pr_debug("%s pdev=0x%p pdata=0x%p ehci=0x%p hcd=0x%p\n", ++ __FUNCTION__, pdev, pdata, ehci, hcd); ++ ++ pr_debug("%s ehci->regs=0x%p hcd->regs=0x%p\n", ++ __FUNCTION__, ehci->regs, hcd->regs); ++ ++ memcpy(ehci->regs, (void *)&usb_ehci_regs, sizeof(struct ehci_regs)); ++ ++ tmp = USBMODE_CM_HOST | (pdata->es ? USBMODE_ES : 0); ++ ehci_writel(ehci, tmp, hcd->regs + FSL_SOC_USB_USBMODE); ++ pr_debug("tmp %08x set usbmode %08x\n", tmp, ++ ehci_readl(ehci, hcd->regs + FSL_SOC_USB_USBMODE)); ++ ++ ehci_writel(ehci, usb_ehci_portsc, &ehci->regs->port_status[0]); ++ pr_debug("set portsc %08x %08x\n", usb_ehci_portsc, ++ ehci_readl(ehci, &ehci->regs->port_status[0])); ++ ++ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); ++ hcd->state = HC_STATE_RUNNING; ++ pdev->dev.power.power_state = PMSG_ON; ++ ++ tmp = ehci_readl(ehci, &ehci->regs->command); ++ tmp |= CMD_RUN; ++ ehci_writel(ehci, tmp, &ehci->regs->command); ++ ++ fsl_platform_set_vbus_power(pdev, 1); ++ ++ usb_hcd_resume_root_hub(hcd); ++ ++ return 0; ++} ++#endif /* CONFIG_USB_OTG */ ++ ++static int ehci_fsl_drv_probe(struct platform_device *pdev) ++{ ++ if (usb_disabled()) ++ return -ENODEV; ++ ++ return usb_hcd_fsl_probe(&ehci_fsl_hc_driver, pdev); ++} ++ ++static int ehci_fsl_drv_remove(struct platform_device *pdev) ++{ ++ struct usb_hcd *hcd = platform_get_drvdata(pdev); ++ ++ usb_hcd_fsl_remove(hcd, pdev); ++ ++ return 0; ++} ++ ++MODULE_ALIAS("fsl-ehci"); ++ ++static struct platform_driver ehci_fsl_driver = { ++ .probe = ehci_fsl_drv_probe, ++ .remove = ehci_fsl_drv_remove, ++ .shutdown = usb_hcd_platform_shutdown, ++#ifdef CONFIG_USB_OTG ++ .suspend = ehci_fsl_drv_suspend, ++ .resume = ehci_fsl_drv_resume, ++#endif ++ .driver = { ++ .name = "fsl-ehci", ++ }, ++}; +--- a/drivers/usb/host/ehci-fsl.h ++++ b/drivers/usb/host/ehci-fsl.h +@@ -18,6 +18,8 @@ + #ifndef _EHCI_FSL_H + #define _EHCI_FSL_H + ++#include <linux/usb/fsl_xcvr.h> ++ + /* offsets for the non-ehci registers in the FSL SOC USB controller */ + #define FSL_SOC_USB_ULPIVP 0x170 + #define FSL_SOC_USB_PORTSC1 0x184 +@@ -34,5 +36,29 @@ + #define FSL_SOC_USB_PRICTRL 0x40c /* NOTE: big-endian */ + #define FSL_SOC_USB_SICTRL 0x410 /* NOTE: big-endian */ + #define FSL_SOC_USB_CTRL 0x500 /* NOTE: big-endian */ +-#define SNOOP_SIZE_2GB 0x1e ++ ++#ifdef CONFIG_MPC834x ++#include <sysdev/fsl_usb.h> ++#endif ++ ++#ifdef CONFIG_ARCH_MX3 ++#include <asm/arch/mx31_usb.h> ++#endif ++ ++#ifdef CONFIG_ARCH_MX27 ++#include <asm/arch/mx27_usb.h> ++#endif ++ ++#ifdef CONFIG_M54455 ++#include <asm-m68k/mcf5445x_usb.h> ++#endif ++ ++ ++static void fsl_platform_set_vbus_power(struct platform_device *pdev, int on) ++{ ++ struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; ++ ++ if (pdata->xcvr_ops && pdata->xcvr_ops->set_vbus_power) ++ pdata->xcvr_ops->set_vbus_power(pdata, on); ++} + #endif /* _EHCI_FSL_H */ +--- a/drivers/usb/host/ehci.h ++++ b/drivers/usb/host/ehci.h +@@ -122,6 +122,12 @@ struct ehci_hcd { /* one per controlle + + u8 sbrn; /* packed release number */ + ++ /* ++ * OTG controllers and transceivers need software interaction; ++ * other external transceivers should be software-transparent ++ */ ++ struct otg_transceiver *transceiver; ++ + /* irq statistics */ + #ifdef EHCI_STATS + struct ehci_stats stats; +@@ -753,6 +759,22 @@ ehci_port_speed(struct ehci_hcd *ehci, u + #define writel_be(val, addr) __raw_writel(val, (__force unsigned *)addr) + #endif + ++#if defined(CONFIG_COLDFIRE) ++/* ++ * Sorry, include/asm-m68k/io.h is messed up. It will give you a ++ * BE readl or a LE readl depending on whether or not CONFIG_PCI is set. ++ * how broken is that? Do the right thing here. ++ */ ++#undef readl ++#undef writel ++ ++#define readl(addr) in_le32((__force unsigned *)(addr)) ++#define writel(val,addr) out_le32((__force unsigned *)(addr),(val)) ++ ++#define readl_be(addr) in_be32((__force unsigned *)(addr)) ++#define writel_be(val, addr) out_be32((__force unsigned *)(addr), (val)) ++#endif ++ + static inline unsigned int ehci_readl(const struct ehci_hcd *ehci, + __u32 __iomem * regs) + { +--- a/drivers/usb/host/ehci-hcd.c ++++ b/drivers/usb/host/ehci-hcd.c +@@ -1043,6 +1043,11 @@ MODULE_LICENSE ("GPL"); + #define PLATFORM_DRIVER ixp4xx_ehci_driver + #endif + ++#ifdef CONFIG_M54455 ++#include "ehci-arc.c" ++#define PLATFORM_DRIVER ehci_fsl_driver ++#endif ++ + #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ + !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) + #error "missing bus glue for ehci-hcd" +--- a/drivers/usb/host/ehci-mem.c ++++ b/drivers/usb/host/ehci-mem.c +@@ -40,7 +40,8 @@ static inline void ehci_qtd_init(struct + { + memset (qtd, 0, sizeof *qtd); + qtd->qtd_dma = dma; +- qtd->hw_token = cpu_to_le32 (QTD_STS_HALT); ++ // DDD official code` has: qtd->hw_token = cpu_to_le32 (QTD_STS_HALT); ++ qtd->hw_token = cpu_to_hc32 (ehci, QTD_STS_HALT); + qtd->hw_next = EHCI_LIST_END(ehci); + qtd->hw_alt_next = EHCI_LIST_END(ehci); + INIT_LIST_HEAD (&qtd->qtd_list); +@@ -211,9 +212,11 @@ static int ehci_mem_init (struct ehci_hc + } + + /* Hardware periodic table */ +- ehci->periodic = (__le32 *) ++ // DDD official code has: ehci->periodic = (__le32 *) ++ ehci->periodic = (__hc32 *) + dma_alloc_coherent (ehci_to_hcd(ehci)->self.controller, +- ehci->periodic_size * sizeof(__le32), ++ // DDD official: ehci->periodic_size * sizeof(__le32), ++ ehci->periodic_size * sizeof(__hc32), + &ehci->periodic_dma, 0); + if (ehci->periodic == NULL) { + goto fail; +--- a/drivers/usb/host/Kconfig ++++ b/drivers/usb/host/Kconfig +@@ -32,6 +32,7 @@ config USB_EHCI_HCD + config USB_EHCI_ROOT_HUB_TT + bool "Root Hub Transaction Translators (EXPERIMENTAL)" + depends on USB_EHCI_HCD && EXPERIMENTAL ++ default y if M54455 + ---help--- + Some EHCI chips have vendor-specific extensions to integrate + transaction translators, so that no OHCI or UHCI companion +@@ -60,12 +61,12 @@ config USB_EHCI_TT_NEWSCHED + + config USB_EHCI_BIG_ENDIAN_MMIO + bool +- depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || ARCH_IXP4XX) ++ depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || ARCH_IXP4XX || M54455) + default y + + config USB_EHCI_BIG_ENDIAN_DESC + bool +- depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX) ++ depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX || M54455) + default y + + config USB_EHCI_FSL +@@ -260,3 +261,19 @@ config USB_R8A66597_HCD + To compile this driver as a module, choose M here: the + module will be called r8a66597-hcd. + ++choice ++ prompt "Select transceiver" ++ depends on M54455 ++ default USB_M5445X_ULPI ++ ++config USB_M5445X_ULPI ++ bool "External ULPI" ++ ---help--- ++ Enable support for the external HS ULPI transceiver. ++ ++config USB_M5445X_FSLS ++ bool "On-chip (FL/LS only)" ++ ---help--- ++ Enable support for the on-chip FL/LS transceiver. ++endchoice ++ +--- a/drivers/usb/host/Makefile ++++ b/drivers/usb/host/Makefile +@@ -6,7 +6,7 @@ ifeq ($(CONFIG_USB_DEBUG),y) + EXTRA_CFLAGS += -DDEBUG + endif + +-obj-$(CONFIG_PCI) += pci-quirks.o ++#obj-$(CONFIG_PCI) += pci-quirks.o + + obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o + obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o +--- a/drivers/usb/Kconfig ++++ b/drivers/usb/Kconfig +@@ -55,6 +55,7 @@ config USB_ARCH_HAS_EHCI + default y if PPC_83xx + default y if SOC_AU1200 + default y if ARCH_IXP4XX ++ default y if M54455 + default PCI + + # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface. +--- a/drivers/usb/Makefile ++++ b/drivers/usb/Makefile +@@ -32,3 +32,5 @@ obj-$(CONFIG_USB) += misc/ + + obj-$(CONFIG_USB_ATM) += atm/ + obj-$(CONFIG_USB_SPEEDTOUCH) += atm/ ++ ++obj-$(CONFIG_USB_OTG) += otg/ +--- /dev/null ++++ b/drivers/usb/otg/fsl_otg.c +@@ -0,0 +1,1306 @@ ++/* ++ * Copyright (c) Freescale Semiconductor, Inc. 2006-2007 ++ * ++ * USB OTG ULPI driver ++ * ++ * Based on code for MPC from: ++ * Leo Li<LeoLi@freescale.com> ++ * Jerry Huang<Chang-Ming.Huang@freescale.com> ++ * ++ * and M5329 code from ++ * Yaroslav Vinogradov yaroslav.vinogradov@freescale.com ++ * Andrey Butok ++ * ++ * Initialization based on code from Shlomi Gridish. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ *************************************************************************** ++ * Changes: ++ * v0.3 08 August 2007 Duck ++ * v0.2 20 October 2006 Andrey Butok ++ * Issues fixing and some changes. ++ * v0.1 September 2006 Yaroslav Vinogradov ++ * Initial version. ++ * ++ */ ++ ++#include <linux/module.h> ++#include <linux/moduleparam.h> ++#include <linux/kernel.h> ++#include <linux/delay.h> ++#include <linux/ioport.h> ++#include <linux/sched.h> ++#include <linux/slab.h> ++#include <linux/smp_lock.h> ++#include <linux/proc_fs.h> ++#include <linux/errno.h> ++#include <linux/init.h> ++#include <linux/reboot.h> ++#include <linux/timer.h> ++#include <linux/list.h> ++#include <linux/interrupt.h> ++#include <linux/usb.h> ++#include <linux/device.h> ++#include <linux/platform_device.h> ++#include <linux/usb/ch9.h> ++#include <linux/usb_gadget.h> ++#include <linux/workqueue.h> ++#include <linux/time.h> ++#include <linux/fsl_devices.h> ++#include <linux/usb/fsl_usb2.h> ++ ++#include <linux/io.h> ++ ++#if defined CONFIG_M54455 ++#include <asm/mcfsim.h> ++#endif ++ ++#define USE_WORK_QUEUES ++#include "fsl_otg.h" ++ ++#define CONFIG_USB_OTG_DEBUG_FILES ++#define DRIVER_VERSION "Revision: 1.56" ++#define DRIVER_AUTHOR "Freescale Semiconductor Inc." ++#define DRIVER_DESC "Freescale USB OTG ULPI Driver" ++#define DRIVER_INFO DRIVER_VERSION " " DRIVER_DESC ++ ++MODULE_DESCRIPTION("Freescale USB OTG Controller Driver"); ++ ++static const char driver_name[] = "fsl-usb2-otg"; ++ ++static spinlock_t usb_dr_regs_lock; ++ ++/*#define HA_DATA_PULSE 1*/ ++ ++volatile static struct fsl_usb_device_regs *usb_dr_regs; ++static struct fsl_otg *fsl_otg_dev; ++static int srp_wait_done; ++ ++/* Driver specific timers */ ++struct fsl_otg_timer *b_data_pulse_tmr, *b_vbus_pulse_tmr, *b_srp_fail_tmr, ++ *b_srp_wait_tmr, *a_wait_enum_tmr; ++ ++static struct list_head active_timers; ++ ++static struct fsl_otg_config fsl_otg_initdata = { ++ .otg_port = 1, ++}; ++ ++#if 0 ++static void dump_state(const char *string, struct otg_fsm *fsm) ++{ ++ printk(KERN_DEBUG "%s\n\tOTG state: %s\n", string, ++ state_string(fsl_otg_dev->otg.state)); ++ printk(KERN_DEBUG "\tFSM protocol=%s\n", fsm->protocol ? ++ (fsm->protocol == PROTO_HOST ? "Host" : "Gadget") ++ : "None"); ++ ++ /* regs */ ++ printk(KERN_DEBUG "\t OTGSC 0x%08x\n", ++ fsl_readl(&usb_dr_regs->otgsc)); ++ printk(KERN_DEBUG "\tPORTSC1 0x%08x\n", ++ fsl_readl(&usb_dr_regs->portsc1)); ++ printk(KERN_DEBUG "\tUSBMODE 0x%08x\n", ++ fsl_readl(&usb_dr_regs->usbmode)); ++ printk(KERN_DEBUG "\t USBCMD 0x%08x\n", ++ fsl_readl(&usb_dr_regs->usbcmd)); ++ printk(KERN_DEBUG "\t USBSTS 0x%08x\n", ++ fsl_readl(&usb_dr_regs->usbsts)); ++ ++ /* ------ State Machine Variables ----- */ ++ printk(KERN_DEBUG "\ta_bus_req: %d\n", fsm->a_bus_req); ++ printk(KERN_DEBUG "\tb_bus_req: %d\n", fsm->b_bus_req); ++ printk(KERN_DEBUG "\ta_bus_resume: %d\n", fsm->a_bus_resume); ++ printk(KERN_DEBUG "\ta_bus_suspend: %d\n", fsm->a_bus_suspend); ++ printk(KERN_DEBUG "\ta_conn: %d\n", fsm->a_conn); ++ printk(KERN_DEBUG "\ta_sess_vld: %d\n", fsm->a_sess_vld); ++ printk(KERN_DEBUG "\ta_srp_det: %d\n", fsm->a_srp_det); ++ printk(KERN_DEBUG "\ta_vbus_vld: %d\n", fsm->a_vbus_vld); ++ printk(KERN_DEBUG "\tb_bus_resume: %d\n", fsm->b_bus_resume); ++ printk(KERN_DEBUG "\tb_bus_suspend: %d\n", fsm->b_bus_suspend); ++ printk(KERN_DEBUG "\tb_conn: %d\n", fsm->b_conn); ++ printk(KERN_DEBUG "\tb_se0_srp: %d\n", fsm->b_se0_srp); ++ printk(KERN_DEBUG "\tb_sess_end: %d\n", fsm->b_sess_end); ++ printk(KERN_DEBUG "\tb_sess_vld: %d\n", fsm->b_sess_vld); ++ printk(KERN_DEBUG "\tid: %d\n", fsm->id); ++} ++#endif ++ ++ ++/* Routines to access transceiver ULPI registers */ ++u8 view_ulpi(u8 addr) ++{ ++ u32 temp; ++ ++ temp = 0x40000000 | (addr << 16); ++ fsl_writel(temp, &usb_dr_regs->ulpiview); ++ ++ udelay(1000); ++ ++ /* DDD timeout this loop: */ ++ do { ++ temp = fsl_readl(&usb_dr_regs->ulpiview); ++ } while (temp & 0x40000000); ++ ++ return (temp & 0x0000ff00) >> 8; ++} ++ ++int write_ulpi(u8 addr, u8 data) ++{ ++ u32 temp; ++ ++ temp = 0x60000000 | (addr << 16) | data; ++ fsl_writel(temp, &usb_dr_regs->ulpiview); ++ return 0; ++} ++ ++/* prototype declaration */ ++void fsl_otg_add_timer(void *timer); ++void fsl_otg_del_timer(void *timer); ++ ++/* -------------------------------------------------------------*/ ++/* Operations that will be called from OTG Finite State Machine */ ++ ++/* Charge vbus for vbus pulsing in SRP */ ++void fsl_otg_chrg_vbus(int on) ++{ ++ u32 tmp; ++ ++ VDBG(" %d\n", on); ++ ++ tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK; ++ ++ if (on) { ++ tmp &= ~OTGSC_CTRL_VBUS_DISCHARGE; ++ tmp |= OTGSC_CTRL_VBUS_CHARGE; ++ } else { ++ tmp &= ~OTGSC_CTRL_VBUS_CHARGE; ++ } ++ fsl_writel(tmp, &usb_dr_regs->otgsc); ++} ++ ++/* Discharge vbus through a resistor to ground */ ++void fsl_otg_dischrg_vbus(int on) ++{ ++ u32 tmp; ++ ++ VDBG(" %d\n", on); ++ ++ tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK; ++ ++ if (on) ++ tmp |= OTGSC_CTRL_VBUS_DISCHARGE; ++ else ++ tmp &= ~OTGSC_CTRL_VBUS_DISCHARGE; ++ ++ fsl_writel(tmp, &usb_dr_regs->otgsc); ++} ++ ++/* A-device driver vbus, controlled through PP bit in PORTSC */ ++void fsl_otg_drv_vbus(int on) ++{ ++ u32 tmp; ++ ++ VDBG(" %d\n", on); ++ ++ tmp = fsl_readl(&usb_dr_regs->portsc1) & ~PORTSCX_W1C_BITS; ++ ++ if (on) ++ tmp |= PORTSCX_PORT_POWER; ++ else ++ tmp &= ~PORTSCX_PORT_POWER; ++ ++ fsl_writel(tmp, &usb_dr_regs->portsc1); ++} ++ ++/* Pull-up D+, signalling connect by periperal. Also used in ++ * data-line pulsing in SRP */ ++void fsl_otg_loc_conn(int on) ++{ ++ u32 tmp; ++ ++ VDBG(" %d\n", on); ++ ++ tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK; ++ ++ if (on) ++ tmp |= OTGSC_CTRL_DATA_PULSING; ++ else ++ tmp &= ~OTGSC_CTRL_DATA_PULSING; ++ ++ fsl_writel(tmp, &usb_dr_regs->otgsc); ++} ++ ++/* Generate SOF by host. This is controlled through suspend/resume the ++ * port. In host mode, controller will automatically send SOF. ++ * Suspend will block the data on the port. ++ */ ++void fsl_otg_loc_sof(int on) ++{ ++ u32 tmp; ++ ++ VDBG(" %d\n", on); ++ ++ tmp = fsl_readl(&usb_dr_regs->portsc1) & ~PORTSCX_W1C_BITS; ++ ++ if (on) ++ tmp |= PORTSCX_PORT_FORCE_RESUME; ++ else ++ tmp |= PORTSCX_PORT_SUSPEND; ++ ++ fsl_writel(tmp, &usb_dr_regs->portsc1); ++} ++ ++/* Start SRP pulsing by data-line pulsing, followed with v-bus pulsing. */ ++void fsl_otg_start_pulse(void) ++{ ++ u32 __attribute__ ((unused)) tmp; ++ ++ VDBG("\n"); ++ srp_wait_done = 0; ++ ++#ifdef HA_DATA_PULSE ++ tmp = fsl_readl(&usb_dr_regs->otgsc) &= ~OTGSC_INTSTS_MASK; ++ tmp |= OTGSC_HA_DATA_PULSE; ++ fsl_writel(tmp, &usb_dr_regs->otgsc); ++#else ++ fsl_otg_loc_conn(1); ++#endif ++ ++ fsl_otg_add_timer(b_data_pulse_tmr); ++} ++ ++void fsl_otg_pulse_vbus(void); ++ ++void b_data_pulse_end(unsigned long foo) ++{ ++#ifdef HA_DATA_PULSE ++#else ++ fsl_otg_loc_conn(0); ++#endif ++ ++ /* Do VBUS pulse after data pulse */ ++ fsl_otg_pulse_vbus(); ++} ++ ++void fsl_otg_pulse_vbus(void) ++{ ++ srp_wait_done = 0; ++ fsl_otg_chrg_vbus(1); ++ /* start the timer to end vbus charge */ ++ fsl_otg_add_timer(b_vbus_pulse_tmr); ++} ++ ++void b_vbus_pulse_end(unsigned long foo) ++{ ++ fsl_otg_chrg_vbus(0); ++ ++ /* As USB3300 using the same a_sess_vld and b_sess_vld voltage ++ * we need to discharge the bus for a while to distinguish ++ * residual voltage of vbus pulsing and A device pull up */ ++ fsl_otg_dischrg_vbus(1); ++ fsl_otg_add_timer(b_srp_wait_tmr); ++} ++ ++void b_srp_end(unsigned long foo) ++{ ++ fsl_otg_dischrg_vbus(0); ++ srp_wait_done = 1; ++ ++ if ((fsl_otg_dev->otg.state == OTG_STATE_B_SRP_INIT) && ++ fsl_otg_dev->fsm.b_sess_vld) ++ fsl_otg_dev->fsm.b_srp_done = 1; ++} ++ ++/* Workaround for a_host suspending too fast. When a_bus_req=0, ++ * a_host will start by SRP. It needs to set b_hnp_enable before ++ * actually suspending to start HNP ++ */ ++void a_wait_enum(unsigned long foo) ++{ ++ VDBG("a_wait_enum timeout\n"); ++ if (!fsl_otg_dev->otg.host->b_hnp_enable) ++ fsl_otg_add_timer(a_wait_enum_tmr); ++ else ++ otg_statemachine(&fsl_otg_dev->fsm); ++} ++ ++/* ------------------------------------------------------*/ ++ ++/* The timeout callback function to set time out bit */ ++void set_tmout(unsigned long indicator) ++{ ++ *(int *)indicator = 1; ++} ++ ++/* Initialize timers */ ++void fsl_otg_init_timers(struct otg_fsm *fsm) ++{ ++ /* FSM used timers */ ++ fsm->a_wait_vrise_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_VRISE, ++ (unsigned long)&fsm->a_wait_vrise_tmout); ++ fsm->a_wait_bcon_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_BCON, ++ (unsigned long)&fsm->a_wait_bcon_tmout); ++ fsm->a_aidl_bdis_tmr = otg_timer_initializer(&set_tmout, TA_AIDL_BDIS, ++ (unsigned long)&fsm->a_aidl_bdis_tmout); ++ fsm->b_ase0_brst_tmr = otg_timer_initializer(&set_tmout, TB_ASE0_BRST, ++ (unsigned long)&fsm->b_ase0_brst_tmout); ++ fsm->b_se0_srp_tmr = otg_timer_initializer(&set_tmout, TB_SE0_SRP, ++ (unsigned long)&fsm->b_se0_srp); ++ fsm->b_srp_fail_tmr = otg_timer_initializer(&set_tmout, TB_SRP_FAIL, ++ (unsigned long)&fsm->b_srp_done); ++ fsm->a_wait_enum_tmr = otg_timer_initializer(&a_wait_enum, 10, ++ (unsigned long)&fsm); ++ ++ /* device driver used timers */ ++ b_srp_wait_tmr = otg_timer_initializer(&b_srp_end, TB_SRP_WAIT, 0); ++ b_data_pulse_tmr = otg_timer_initializer(&b_data_pulse_end, ++ TB_DATA_PLS, 0); ++ b_vbus_pulse_tmr = otg_timer_initializer(&b_vbus_pulse_end, ++ TB_VBUS_PLS, 0); ++ ++} ++ ++/* Add timer to timer list */ ++void fsl_otg_add_timer(void *gtimer) ++{ ++ struct fsl_otg_timer *timer = (struct fsl_otg_timer *)gtimer; ++ struct fsl_otg_timer *tmp_timer; ++ ++ /* Check if the timer is already in the active list, ++ * if so update timer count ++ */ ++ list_for_each_entry(tmp_timer, &active_timers, list) ++ if (tmp_timer == timer) { ++ timer->count = timer->expires; ++ return; ++ } ++ timer->count = timer->expires; ++ list_add_tail(&timer->list, &active_timers); ++} ++ ++/* Remove timer from the timer list; clear timeout status */ ++void fsl_otg_del_timer(void *gtimer) ++{ ++ struct fsl_otg_timer *timer = (struct fsl_otg_timer *)gtimer; ++ struct fsl_otg_timer *tmp_timer, *del_tmp; ++ ++ list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) ++ if (tmp_timer == timer) ++ list_del(&timer->list); ++} ++ ++/* ++ * Reduce timer count by 1, and find timeout conditions. ++ * Called by fsl_otg 1ms timer interrupt ++ */ ++int fsl_otg_tick_timer(void) ++{ ++ struct fsl_otg_timer *tmp_timer, *del_tmp; ++ int expired = 0; ++ ++ list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) { ++ tmp_timer->count--; ++ /* check if timer expires */ ++ if (!tmp_timer->count) { ++ list_del(&tmp_timer->list); ++ tmp_timer->function(tmp_timer->data); ++ expired = 1; ++ } ++ } ++ ++ return expired; ++} ++ ++/* Reset controller, not reset the bus */ ++void otg_reset_controller(void) ++{ ++ u32 command; ++ unsigned long flags; ++ int timeout; ++ ++ VDBG("\n"); ++ ++ spin_lock_irqsave(&usb_dr_regs_lock, flags); ++ ++ command = fsl_readl(&usb_dr_regs->usbcmd); ++ command |= USB_CMD_CTRL_RESET; ++ fsl_writel(command, &usb_dr_regs->usbcmd); ++ spin_unlock_irqrestore(&usb_dr_regs_lock, flags); ++ ++ /* Wait reset completed */ ++ timeout = 500; ++ while (fsl_readl(&usb_dr_regs->usbcmd) & USB_CMD_CTRL_RESET) ++ udelay(1); ++ if (timeout <= 0) ++ ERR("%s - USBCMD_RST never clear. Timeout is %d \n", ++ __FUNCTION__, timeout); ++} ++ ++/* Call suspend/resume routines in host driver */ ++int fsl_otg_start_host(struct otg_fsm *fsm, int on) ++{ ++ struct otg_transceiver *xceiv = fsm->transceiver; ++ struct device *dev; ++ struct fsl_otg *otg_dev = container_of(xceiv, struct fsl_otg, otg); ++ u32 retval = 0; ++ ++ if (!xceiv->host) ++ return -ENODEV; ++ ++ dev = xceiv->host->controller; ++ ++ /* ++ * Update a_vbus_vld state as a_vbus_vld int is disabled ++ * in device mode ++ */ ++ fsm->a_vbus_vld = ++ !!(fsl_readl(&usb_dr_regs->otgsc) & OTGSC_STS_A_VBUS_VALID); ++ if (on) { ++ /* start fsl usb host controller */ ++ if (otg_dev->host_working) ++ goto end; ++ else { ++ otg_reset_controller(); ++ VDBG("host on......\n"); ++ if (dev->driver->resume) { ++ retval = dev->driver->resume(dev); ++ if (fsm->id) { ++ /* default-b */ ++ fsl_otg_drv_vbus(1); ++ /* Workaround: b_host can't driver ++ * vbus, but PP in PORTSC needs to ++ * be 1 for host to work. ++ * So we set drv_vbus bit in ++ * transceiver to 0 thru ULPI. */ ++ write_ulpi(0x0c, 0x20); ++ } ++ } ++ ++ otg_dev->host_working = 1; ++ } ++ } else { ++ /* stop fsl usb host controller */ ++ if (!otg_dev->host_working) ++ goto end; ++ else { ++ VDBG("host off......\n"); ++ if (dev && dev->driver) { ++ retval = dev->driver->suspend(dev, PMSG_SUSPEND); ++ if (fsm->id) ++ /* default-b */ ++ fsl_otg_drv_vbus(0); ++ } ++ otg_dev->host_working = 0; ++ } ++ } ++end: ++ return retval; ++} ++ ++/* ++ * Call suspend and resume function in udc driver ++ * to stop and start udc driver. ++ */ ++int fsl_otg_start_gadget(struct otg_fsm *fsm, int on) ++{ ++ struct otg_transceiver *xceiv = fsm->transceiver; ++ struct device *dev; ++ ++ VDBG("DDD fsm=%p xceiv=%p\n", fsm, xceiv); ++ if (!xceiv->gadget || !xceiv->gadget->dev.parent) ++ return -ENODEV; ++ ++ VDBG("DDD xceiv=%p xceiv->gadget=%p parent=%p\n", xceiv, xceiv->gadget, ++ xceiv->gadget->dev.parent); ++ ++ VDBG("gadget %s\n", on ? "on" : "off"); ++ /* DDD dump_state("starting gadget", fsm); */ ++ ++ dev = xceiv->gadget->dev.parent; ++ ++ if (on) ++ dev->driver->resume(dev); ++ else ++ dev->driver->suspend(dev, PMSG_SUSPEND); ++ ++ return 0; ++} ++ ++#if 0 ++static void fsl_otg_enable(struct otg_transceiver *otg_p) ++{ ++ struct fsl_otg *otg_dev = container_of(otg_p, struct fsl_otg, otg); ++ struct otg_fsm *fsm = &(otg_dev)->fsm; ++ u32 otg_sc; ++ ++ /* DDD VDBG(""); */ ++ /* enable OTG interrupt */ ++ otg_sc = fsl_readl(&usb_dr_regs->otgsc); ++ otg_sc |= OTGSC_INTERRUPT_ENABLE_BITS_MASK; ++ otg_sc &= ~OTGSC_IE_1ms_TIMER; ++ otg_sc &= ~OTGSC_CTRL_VBUS_DISCHARGE; ++ otg_sc |= OTGSC_IE_USB_ID; ++ fsl_writel(otg_sc, &usb_dr_regs->otgsc); ++ ++ fsm->id = (otg_sc & OTGSC_STS_USB_ID) ? 1 : 0; ++ ++ if (fsm->id) { ++ otg_p->state = OTG_STATE_UNDEFINED; ++ } else { ++ otg_p->state = OTG_STATE_A_IDLE; ++ } ++ ++ otg_p->default_a = (fsm->id == 0); ++ otg_p->host->is_b_host = fsm->id; ++ otg_p->gadget->is_a_peripheral = !fsm->id; ++ ++ fsm->a_vbus_vld = 1; ++ ++ fsm->b_sess_vld = (otg_sc & OTGSC_STS_B_SESSION_VALID) ? 1 : 0; ++ fsm->a_sess_vld = (otg_sc & OTGSC_STS_A_SESSION_VALID) ? 1 : 0; ++ fsm->b_sess_end = (otg_sc & OTGSC_STS_B_SESSION_END) ? 1 : 0; ++} ++#endif ++ ++/* ++ * Called by initialization code of host driver. Register host controller ++ * to the OTG. Suspend host for OTG role detection. ++ */ ++static int fsl_otg_set_host(struct otg_transceiver *otg_p, struct usb_bus *host) ++{ ++ struct fsl_otg *otg_dev = container_of(otg_p, struct fsl_otg, otg); ++ ++ if (!otg_p || otg_dev != fsl_otg_dev) ++ return -ENODEV; ++ ++ otg_p->host = host; ++ ++ otg_dev->fsm.a_bus_drop = 0; ++ otg_dev->fsm.a_bus_req = 1; ++ ++ if (host) { ++ VDBG("host off......\n"); ++ ++ otg_p->host->otg_port = fsl_otg_initdata.otg_port; ++ otg_p->host->is_b_host = otg_dev->fsm.id; ++ /* must leave time for khubd to finish its thing ++ * before yanking the host driver out from under it, ++ * so suspend the host after a short delay. ++ */ ++ otg_dev->host_working = 1; ++ schedule_delayed_work(&otg_dev->otg_event, 100); ++ return 0; ++ } else { /* host driver going away */ ++ ++ if (!(le32_to_cpu(otg_dev->dr_mem_map->otgsc) & ++ OTGSC_STS_USB_ID)) { ++ /* Mini-A cable connected */ ++ struct otg_fsm *fsm = &otg_dev->fsm; ++ ++ otg_p->state = OTG_STATE_UNDEFINED; ++ fsm->protocol = PROTO_UNDEF; ++ } ++ } ++ ++ otg_dev->host_working = 0; ++ ++ otg_statemachine(&otg_dev->fsm); ++ ++ return 0; ++} ++ ++/* Called by initialization code of udc. Register udc to OTG.*/ ++static int fsl_otg_set_peripheral(struct otg_transceiver *otg_p, ++ struct usb_gadget *gadget) ++{ ++ struct fsl_otg *otg_dev = container_of(otg_p, struct fsl_otg, otg); ++ ++ VDBG("\n"); ++ ++ if (!otg_p || otg_dev != fsl_otg_dev) ++ return -ENODEV; ++ ++ if (!gadget) { ++ if (!otg_dev->otg.default_a) ++ otg_p->gadget->ops->vbus_draw(otg_p->gadget, 0); ++ usb_gadget_vbus_disconnect(otg_dev->otg.gadget); ++ otg_dev->otg.gadget = 0; ++ otg_dev->fsm.b_bus_req = 0; ++ otg_statemachine(&otg_dev->fsm); ++ return 0; ++ } ++ ++ otg_p->gadget = gadget; ++ otg_p->gadget->is_a_peripheral = !otg_dev->fsm.id; ++ ++ otg_dev->fsm.b_bus_req = 1; ++ ++ /* start the gadget right away if the ID pin says Mini-B */ ++ DBG("ID pin=%d\n", otg_dev->fsm.id); ++ if (otg_dev->fsm.id == 1) { ++ fsl_otg_start_host(&otg_dev->fsm, 0); ++ fsl_otg_drv_vbus(0); ++ fsl_otg_start_gadget(&otg_dev->fsm, 1); ++ } ++ ++ return 0; ++} ++ ++/* Set OTG port power, only for B-device */ ++static int fsl_otg_set_power(struct otg_transceiver *otg_p, unsigned mA) ++{ ++ if (!fsl_otg_dev) ++ return -ENODEV; ++ if (otg_p->state == OTG_STATE_B_PERIPHERAL) ++ printk(KERN_DEBUG "FSL OTG:Draw %d mA\n", mA); ++ ++ return 0; ++} ++ ++/* Delayed pin detect interrupt processing. ++ * ++ * When the Mini-A cable is disconnected from the board, ++ * the pin-detect interrupt happens before the disconnnect ++ * interrupts for the connected device(s). In order to ++ * process the disconnect interrupt(s) prior to switching ++ * roles, the pin-detect interrupts are delayed, and handled ++ * by this routine. ++ */ ++static void fsl_otg_event(struct work_struct *work) ++{ ++ struct fsl_otg *og = container_of(work, struct fsl_otg, otg_event.work); ++ struct otg_fsm *fsm = &og->fsm; ++ ++ VDBG("DDD fsm->id=%d\n", fsm->id); ++ if (fsm->id) { /* switch to gadget */ ++ fsl_otg_start_host(fsm, 0); ++ fsl_otg_drv_vbus(0); ++ fsl_otg_start_gadget(fsm, 1); ++ } ++} ++ ++/* B-device start SRP */ ++static int fsl_otg_start_srp(struct otg_transceiver *otg_p) ++{ ++ struct fsl_otg *otg_dev = container_of(otg_p, struct fsl_otg, otg); ++ ++ if (!otg_p || otg_dev != fsl_otg_dev ++ || otg_p->state != OTG_STATE_B_IDLE) ++ return -ENODEV; ++ ++ otg_dev->fsm.b_bus_req = 1; ++ otg_statemachine(&otg_dev->fsm); ++ ++ return 0; ++} ++ ++/* A_host suspend will call this function to start hnp */ ++static int fsl_otg_start_hnp(struct otg_transceiver *otg_p) ++{ ++ struct fsl_otg *otg_dev = container_of(otg_p, struct fsl_otg, otg); ++ ++ if (!otg_p || otg_dev != fsl_otg_dev) ++ return -ENODEV; ++ ++ VDBG("start_hnp.............\n"); ++ /* clear a_bus_req to enter a_suspend state */ ++ otg_dev->fsm.a_bus_req = 0; ++ otg_statemachine(&otg_dev->fsm); ++ ++ return 0; ++} ++ ++/* ++ * Interrupt handler. OTG/host/peripheral share the same int line. ++ * OTG driver clears OTGSC interrupts and leaves USB interrupts ++ * intact. It needs to have knowledge of some USB interrupts ++ * such as port change. ++ */ ++irqreturn_t fsl_otg_isr(int irq, void *dev_id) ++{ ++ struct otg_fsm *fsm = &((struct fsl_otg *)dev_id)->fsm; ++ struct otg_transceiver *otg = &((struct fsl_otg *)dev_id)->otg; ++ u32 otg_int_src, otg_sc; ++ ++ otg_sc = fsl_readl(&usb_dr_regs->otgsc); ++ otg_int_src = otg_sc & OTGSC_INTSTS_MASK & (otg_sc >> 8); ++ ++ /* Only clear otg interrupts */ ++ fsl_writel(otg_sc, &usb_dr_regs->otgsc); ++ ++ /*FIXME: ID change not generate when init to 0 */ ++ fsm->id = (otg_sc & OTGSC_STS_USB_ID) ? 1 : 0; ++ otg->default_a = (fsm->id == 0); ++ ++ /* process OTG interrupts */ ++ if (otg_int_src) { ++ VDBG("\nOTG irq 0x%08x\n", otg_int_src); ++ ++ if (otg_int_src & OTGSC_INTSTS_USB_ID) { ++ fsm->id = (otg_sc & OTGSC_STS_USB_ID) ? 1 : 0; ++ otg->default_a = (fsm->id == 0); ++ /* clear conn information */ ++ if (fsm->id) ++ fsm->b_conn = 0; ++ else ++ fsm->a_conn = 0; ++ ++ if (otg->host) ++ otg->host->is_b_host = fsm->id; ++ if (otg->gadget) ++ otg->gadget->is_a_peripheral = !fsm->id; ++ VDBG("ID int (ID is %d)\n", fsm->id); ++ ++ if (fsm->id) { /* switch to gadget */ ++ schedule_delayed_work(&((struct fsl_otg *) ++ dev_id)->otg_event, 25); ++ } else { /* switch to host */ ++ cancel_delayed_work(& ++ ((struct fsl_otg *)dev_id)-> ++ otg_event); ++ fsl_otg_start_gadget(fsm, 0); ++ fsl_otg_drv_vbus(1); ++ fsl_otg_start_host(fsm, 1); ++ } ++ ++ return IRQ_HANDLED; ++ } ++ } ++ ++ return IRQ_NONE; ++} ++ ++ ++static struct otg_fsm_ops fsl_otg_ops = { ++ .chrg_vbus = fsl_otg_chrg_vbus, ++ .drv_vbus = fsl_otg_drv_vbus, ++ .loc_conn = fsl_otg_loc_conn, ++ .loc_sof = fsl_otg_loc_sof, ++ .start_pulse = fsl_otg_start_pulse, ++ ++ .add_timer = fsl_otg_add_timer, ++ .del_timer = fsl_otg_del_timer, ++ ++ .start_host = fsl_otg_start_host, ++ .start_gadget = fsl_otg_start_gadget, ++}; ++ ++/* Initialize the global variable fsl_otg_dev and request IRQ for OTG */ ++int fsl_otg_cfg(struct platform_device *pdev) ++{ ++ int status; ++ struct fsl_otg *fsl_otg_tc; ++ struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; ++ struct resource *res; ++ ++ DBG("\n"); ++ ++ if (fsl_otg_dev) ++ return 0; ++ ++ /* allocate space to fsl otg device */ ++ fsl_otg_tc = kzalloc(sizeof(struct fsl_otg), GFP_KERNEL); ++ if (!fsl_otg_tc) ++ return -ENODEV; ++ ++ if (pdata->regs) { ++ fsl_otg_tc->dr_mem_map = pdata->regs; ++ } else { ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!res) { ++ dev_err(&pdev->dev, "no register addr.\n"); ++ return -ENODEV; ++ } ++ ++ /* ++ printk("DDD %s(): rsrc_start=0x%x rsrc_len=0x%x\n", ++ __FUNCTION__, res->start, res->end - res->start + 1); ++ */ ++ ++ if (!request_mem_region(res->start, res->end - res->start + 1, ++ "OTG")) { ++ dev_dbg(&pdev->dev, "request_mem_region failed\n"); ++ return -EBUSY; ++ } ++ fsl_otg_tc->dr_mem_map = ioremap(res->start, ++ res->end - res->start + 1); ++ } ++ DBG("set dr_mem_map to 0x%p\n", fsl_otg_tc->dr_mem_map); ++ ++ INIT_DELAYED_WORK(&fsl_otg_tc->otg_event, fsl_otg_event); ++ ++ INIT_LIST_HEAD(&active_timers); ++ fsl_otg_init_timers(&fsl_otg_tc->fsm); ++ ++ /* Set OTG state machine operations */ ++ fsl_otg_tc->fsm.ops = &fsl_otg_ops; ++ ++ /* record initial state of ID pin */ ++ fsl_otg_tc->fsm.id = (fsl_otg_tc->dr_mem_map->otgsc & OTGSC_STS_USB_ID) ++ ? 1 : 0; ++ DBG("initial ID pin=%d\n", fsl_otg_tc->fsm.id); ++ ++ /* initialize the otg structure */ ++ fsl_otg_tc->otg.label = DRIVER_DESC; ++ fsl_otg_tc->otg.set_host = fsl_otg_set_host; ++ fsl_otg_tc->otg.set_peripheral = fsl_otg_set_peripheral; ++ fsl_otg_tc->otg.set_power = fsl_otg_set_power; ++ fsl_otg_tc->otg.start_hnp = fsl_otg_start_hnp; ++ fsl_otg_tc->otg.start_srp = fsl_otg_start_srp; ++ ++ fsl_otg_dev = fsl_otg_tc; ++ ++ /* Store the otg transceiver */ ++ status = otg_set_transceiver(&fsl_otg_tc->otg); ++ if (status) { ++ printk(KERN_WARNING ": unable to register OTG transceiver.\n"); ++ return status; ++ } ++ ++ return 0; ++} ++ ++/* OTG Initialization*/ ++int usb_otg_start(struct platform_device *pdev) ++{ ++ struct fsl_otg *p_otg; ++ struct otg_transceiver *otg_trans = otg_get_transceiver(); ++ struct otg_fsm *fsm; ++ int status; ++ u32 temp; ++ struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; ++ int timeout; ++ ++ DBG("\n"); ++ ++ p_otg = container_of(otg_trans, struct fsl_otg, otg); ++ fsm = &p_otg->fsm; ++ ++ /* Initialize the state machine structure with default values */ ++ SET_OTG_STATE(otg_trans, OTG_STATE_UNDEFINED); ++ fsm->transceiver = &p_otg->otg; ++ ++ usb_dr_regs = p_otg->dr_mem_map; ++ DBG("set usb_dr_regs to 0x%p\n", usb_dr_regs); ++ ++ /* request irq */ ++ p_otg->irq = platform_get_irq(pdev, 0); ++ status = request_irq(p_otg->irq, fsl_otg_isr, ++ IRQF_SHARED, driver_name, p_otg); ++ if (status) { ++ dev_dbg(p_otg->otg.dev, "can't get IRQ %d, error %d\n", ++ p_otg->irq, status); ++ kfree(p_otg); ++ return status; ++ } ++ ++ ++ /* stop the controller */ ++ temp = fsl_readl(&usb_dr_regs->usbcmd) & ~USB_CMD_RUN_STOP; ++ fsl_writel(temp, &usb_dr_regs->usbcmd); ++ ++ /* reset the controller */ ++ temp = fsl_readl(&usb_dr_regs->usbcmd); ++ temp |= USB_CMD_CTRL_RESET; ++ fsl_writel(temp, &usb_dr_regs->usbcmd); ++ ++ /* wait reset completed */ ++ timeout = 500; ++ while (timeout-- && ++ fsl_readl(&usb_dr_regs->usbcmd) & USB_CMD_CTRL_RESET) ++ udelay(1); ++ if (timeout <= 0) ++ ERR("%s - USBCMD_RST never clear. Timeout is %d \n", ++ __FUNCTION__, timeout); ++ ++ /* configure the VBUSHS as IDLE(both host and device) */ ++ temp = USB_MODE_STREAM_DISABLE | (pdata->es ? USBMODE_ES : 0); ++ fsl_writel(temp, &usb_dr_regs->usbmode); ++ ++ /* configure PHY interface */ ++ temp = fsl_readl(&usb_dr_regs->portsc1); ++ temp &= ~(PORTSCX_PHY_TYPE_SEL | PORTSCX_PTW_8BIT); ++ ++ /* DDD wrong xcvr setting stuff follows */ ++ temp |= PORTSCX_PTS_ULPI; ++ fsl_writel(temp, &usb_dr_regs->portsc1); ++ ++ ++ /* disable all interrupt and clear all OTGSC status */ ++ temp = fsl_readl(&usb_dr_regs->otgsc); ++ temp &= ~OTGSC_INTERRUPT_ENABLE_BITS_MASK; ++ temp |= OTGSC_INTERRUPT_STATUS_BITS_MASK | OTGSC_CTRL_VBUS_DISCHARGE; ++ fsl_writel(temp, &usb_dr_regs->otgsc); ++ ++ fsl_otg_drv_vbus(0); ++ ++ /* ++ * The identification (id) input is FALSE when a Mini-A plug is inserted ++ * in the devices Mini-AB receptacle. Otherwise, this input is TRUE. ++ * Also: record initial state of ID pin ++ */ ++ if (fsl_readl(&usb_dr_regs->otgsc) & OTGSC_STS_USB_ID) { ++ p_otg->otg.state = OTG_STATE_UNDEFINED; ++ p_otg->fsm.id = 1; ++ } else { ++ p_otg->otg.state = OTG_STATE_A_IDLE; ++ p_otg->fsm.id = 0; ++ } ++ ++ DBG("initial ID pin=%d\n", p_otg->fsm.id); ++ ++ /* enable OTG ID pin interrupt */ ++ temp = fsl_readl(&usb_dr_regs->otgsc); ++ temp |= OTGSC_IE_USB_ID; ++ temp &= ~(OTGSC_CTRL_VBUS_DISCHARGE | OTGSC_IE_1ms_TIMER); ++ fsl_writel(temp, &usb_dr_regs->otgsc); ++ ++ return 0; ++} ++ ++/* Initialize board specific registers,PIB board,clock and pin multiplexing */ ++static int board_init(struct platform_device *pdev) ++{ ++ struct fsl_usb2_platform_data *pdata; ++ pdata = (struct fsl_usb2_platform_data *)pdev->dev.platform_data; ++ ++ /* ++ * do platform specific init: check the clock, grab/config pins, etc. ++ */ ++ if (pdata->platform_init(pdev) != 0) ++ return -EINVAL; ++ ++ return 0; ++} ++ ++/*------------------------------------------------------------------------- ++ PROC File System Support ++-------------------------------------------------------------------------*/ ++#ifdef CONFIG_USB_OTG_DEBUG_FILES ++ ++#include <linux/seq_file.h> ++ ++static const char proc_filename[] = "driver/fsl_usb2_otg"; ++ ++static int otg_proc_read(char *page, char **start, off_t off, int count, ++ int *eof, void *_dev) ++{ ++ struct otg_fsm *fsm = &fsl_otg_dev->fsm; ++ char *buf = page; ++ char *next = buf; ++ unsigned size = count; ++ unsigned long flags; ++ int t; ++ u32 tmp_reg; ++ ++ if (off != 0) ++ return 0; ++ ++ spin_lock_irqsave(&fsm->lock, flags); ++ ++ /* ------basic driver infomation ---- */ ++ t = scnprintf(next, size, ++ DRIVER_DESC "\n" "fsl_usb2_otg version: %s\n\n", ++ DRIVER_VERSION); ++ size -= t; ++ next += t; ++ ++ /* ------ Registers ----- */ ++ /* tmp_reg = le32_to_cpu(usb_dr_regs->otgsc); */ ++ tmp_reg = fsl_readl(&usb_dr_regs->otgsc); ++ t = scnprintf(next, size, "OTGSC reg: 0x%08x\n", tmp_reg); ++ size -= t; ++ next += t; ++ ++ /* tmp_reg = le32_to_cpu(usb_dr_regs->portsc); */ ++ tmp_reg = fsl_readl(&usb_dr_regs->portsc1); ++ t = scnprintf(next, size, "PORTSC reg: 0x%08x\n", tmp_reg); ++ size -= t; ++ next += t; ++ ++ /* tmp_reg = le32_to_cpu(usb_dr_regs->usbmode); */ ++ tmp_reg = fsl_readl(&usb_dr_regs->usbmode); ++ t = scnprintf(next, size, "USBMODE reg: 0x%08x\n", tmp_reg); ++ size -= t; ++ next += t; ++ ++ /* tmp_reg = le32_to_cpu(usb_dr_regs->usbcmd); */ ++ tmp_reg = fsl_readl(&usb_dr_regs->usbcmd); ++ t = scnprintf(next, size, "USBCMD reg: 0x%08x\n", tmp_reg); ++ size -= t; ++ next += t; ++ ++ /* tmp_reg = le32_to_cpu(usb_dr_regs->usbsts); */ ++ tmp_reg = fsl_readl(&usb_dr_regs->usbsts); ++ t = scnprintf(next, size, "USBSTS reg: 0x%08x\n", tmp_reg); ++ size -= t; ++ next += t; ++ ++ /* ------ State ----- */ ++ t = scnprintf(next, size, "FSM protocol=%d %s\n", fsm->protocol, ++ fsm->protocol ? ++ (fsm->protocol == PROTO_HOST ? "Host" : "Gadget") ++ : "None"); ++ size -= t; ++ next += t; ++ ++ t = scnprintf(next, size, ++ "OTG state: %s\n\n", ++ state_string(fsl_otg_dev->otg.state)); ++ size -= t; ++ next += t; ++ ++ /* ------ State Machine Variables ----- */ ++ t = scnprintf(next, size, "a_bus_req: %d\n", fsm->a_bus_req); ++ size -= t; ++ next += t; ++ ++ t = scnprintf(next, size, "b_bus_req: %d\n", fsm->b_bus_req); ++ size -= t; ++ next += t; ++ ++ t = scnprintf(next, size, "a_bus_resume: %d\n", fsm->a_bus_resume); ++ size -= t; ++ next += t; ++ ++ t = scnprintf(next, size, "a_bus_suspend: %d\n", fsm->a_bus_suspend); ++ size -= t; ++ next += t; ++ ++ t = scnprintf(next, size, "a_conn: %d\n", fsm->a_conn); ++ size -= t; ++ next += t; ++ ++ t = scnprintf(next, size, "a_sess_vld: %d\n", fsm->a_sess_vld); ++ size -= t; ++ next += t; ++ ++ t = scnprintf(next, size, "a_srp_det: %d\n", fsm->a_srp_det); ++ size -= t; ++ next += t; ++ ++ t = scnprintf(next, size, "a_vbus_vld: %d\n", fsm->a_vbus_vld); ++ size -= t; ++ next += t; ++ ++ t = scnprintf(next, size, "b_bus_resume: %d\n", fsm->b_bus_resume); ++ size -= t; ++ next += t; ++ ++ t = scnprintf(next, size, "b_bus_suspend: %d\n", fsm->b_bus_suspend); ++ size -= t; ++ next += t; ++ ++ t = scnprintf(next, size, "b_conn: %d\n", fsm->b_conn); ++ size -= t; ++ next += t; ++ ++ t = scnprintf(next, size, "b_se0_srp: %d\n", fsm->b_se0_srp); ++ size -= t; ++ next += t; ++ ++ t = scnprintf(next, size, "b_sess_end: %d\n", fsm->b_sess_end); ++ size -= t; ++ next += t; ++ ++ t = scnprintf(next, size, "b_sess_vld: %d\n", fsm->b_sess_vld); ++ size -= t; ++ next += t; ++ ++ t = scnprintf(next, size, "id: %d\n", fsm->id); ++ size -= t; ++ next += t; ++ ++ spin_unlock_irqrestore(&fsm->lock, flags); ++ ++ *eof = 1; ++ return count - size; ++} ++ ++#define create_proc_file() create_proc_read_entry(proc_filename, \ ++ 0, NULL, otg_proc_read, NULL) ++ ++#define remove_proc_file() remove_proc_entry(proc_filename, NULL) ++ ++#else /* !CONFIG_USB_OTG_DEBUG_FILES */ ++ ++#define create_proc_file() do {} while (0) ++#define remove_proc_file() do {} while (0) ++ ++#endif /*CONFIG_USB_OTG_DEBUG_FILES */ ++ ++/*----------------------------------------------------------*/ ++/* Char driver interface to control some OTG input */ ++ ++/* ++ * This function handle some ioctl command,such as get otg ++ * status and set host suspend ++ */ ++static int fsl_otg_ioctl(struct inode *inode, struct file *file, ++ unsigned int cmd, unsigned long arg) ++{ ++ u32 retval = 0; ++ ++ switch (cmd) { ++ case GET_OTG_STATUS: ++ retval = fsl_otg_dev->host_working; ++ break; ++ ++ case SET_A_SUSPEND_REQ: ++ fsl_otg_dev->fsm.a_suspend_req = arg; ++ break; ++ ++ case SET_A_BUS_DROP: ++ fsl_otg_dev->fsm.a_bus_drop = arg; ++ break; ++ ++ case SET_A_BUS_REQ: ++ fsl_otg_dev->fsm.a_bus_req = arg; ++ break; ++ ++ case SET_B_BUS_REQ: ++ fsl_otg_dev->fsm.b_bus_req = arg; ++ break; ++ ++ default: ++ break; ++ } ++ ++ otg_statemachine(&fsl_otg_dev->fsm); ++ ++ return retval; ++} ++ ++static int fsl_otg_open(struct inode *inode, struct file *file) ++{ ++ ++ return 0; ++} ++ ++static int fsl_otg_release(struct inode *inode, struct file *file) ++{ ++ ++ return 0; ++} ++ ++static struct file_operations otg_fops = { ++ .owner = THIS_MODULE, ++ .llseek = NULL, ++ .read = NULL, ++ .write = NULL, ++ .ioctl = fsl_otg_ioctl, ++ .open = fsl_otg_open, ++ .release = fsl_otg_release, ++}; ++ ++static int __init fsl_otg_probe(struct platform_device *pdev) ++{ ++ int status; ++ struct fsl_usb2_platform_data *pdata; ++ ++ DBG("pdev=0x%p\n", pdev); ++ ++ if (!pdev) ++ return -ENODEV; ++ ++ if (!pdev->dev.platform_data) ++ return -ENOMEM; ++ ++ pdata = pdev->dev.platform_data; ++ /* Initialize the clock, multiplexing pin and PHY interface */ ++ board_init(pdev); ++ ++ /* configure the OTG */ ++ status = fsl_otg_cfg(pdev); ++ if (status) { ++ printk(KERN_INFO "Couldn't init OTG module\n"); ++ return -status; ++ } ++ ++ /* start OTG */ ++ status = usb_otg_start(pdev); ++ ++ if (register_chrdev(FSL_OTG_MAJOR, FSL_OTG_NAME, &otg_fops)) { ++ printk(KERN_WARNING FSL_OTG_NAME ++ ": unable to register FSL OTG device\n"); ++ return -EIO; ++ } ++ ++ create_proc_file(); ++ return status; ++} ++ ++static int fsl_otg_remove(struct platform_device *pdev) ++{ ++ u32 ie; ++ struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; ++ unsigned long flags; ++ ++ DBG("pdev=0x%p pdata=0x%p\n", pdev, pdata); ++ ++ otg_set_transceiver(NULL); ++ ++ /* disable and clear OTGSC interrupts */ ++ spin_lock_irqsave(&usb_dr_regs_lock, flags); ++ ie = fsl_readl(&usb_dr_regs->otgsc); ++ ie &= ~OTGSC_INTERRUPT_ENABLE_BITS_MASK; ++ ie |= OTGSC_INTERRUPT_STATUS_BITS_MASK; ++ fsl_writel(ie, &usb_dr_regs->otgsc); ++ spin_unlock_irqrestore(&usb_dr_regs_lock, flags); ++ ++ free_irq(fsl_otg_dev->irq, fsl_otg_dev); ++ ++ kfree(fsl_otg_dev); ++ ++ remove_proc_file(); ++ ++ unregister_chrdev(FSL_OTG_MAJOR, FSL_OTG_NAME); ++ ++ if (pdata->platform_uninit) ++ pdata->platform_uninit(pdev); ++ ++ fsl_otg_dev = NULL; ++ return 0; ++} ++ ++struct platform_driver fsl_otg_driver = { ++ .probe = fsl_otg_probe, ++ .remove = fsl_otg_remove, ++ .driver = { ++ .name = driver_name, ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++/*-------------------------------------------------------------------------*/ ++ ++static int __init fsl_usb_otg_init(void) ++{ ++ printk(KERN_INFO DRIVER_DESC " loaded, %s\n", DRIVER_VERSION); ++ return platform_driver_register(&fsl_otg_driver); ++} ++ ++static void __exit fsl_usb_otg_exit(void) ++{ ++ platform_driver_unregister(&fsl_otg_driver); ++} ++ ++module_init(fsl_usb_otg_init); ++module_exit(fsl_usb_otg_exit); ++ ++MODULE_DESCRIPTION(DRIVER_INFO); ++MODULE_AUTHOR(DRIVER_AUTHOR); ++MODULE_LICENSE("GPL"); +--- /dev/null ++++ b/drivers/usb/otg/fsl_otg.h +@@ -0,0 +1,139 @@ ++/* ++ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. ++ */ ++ ++/* ++ * The code contained herein is licensed under the GNU General Public ++ * License. You may obtain a copy of the GNU General Public License ++ * Version 2 or later at the following locations: ++ * ++ * http://www.opensource.org/licenses/gpl-license.html ++ * http://www.gnu.org/copyleft/gpl.html ++ */ ++ ++#ifndef FSL_OTG_H ++#define FSL_OTG_H ++#include <linux/usb/otg.h> ++#include "otg_fsm.h" ++#include <linux/ioctl.h> ++ ++#define ERR(format, arg...) \ ++printk(KERN_ERR "%s:%s: " format "\n" , __FILE__, __FUNCTION__ , ## arg) ++ ++/* ++ * A-DEVICE timing constants ++ */ ++ ++/* Wait for VBUS Rise */ ++#define TA_WAIT_VRISE (100) /* a_wait_vrise 100 ms, section: 6.6.5.1 */ ++ ++/* Wait for B-Connect */ ++#define TA_WAIT_BCON (10000) /* a_wait_bcon > 1 sec, section: 6.6.5.2 ++ * This is only used to get out of ++ * OTG_STATE_A_WAIT_BCON state if there was ++ * no connection for these many milliseconds ++ */ ++ ++/* A-Idle to B-Disconnect */ ++/* It is necessary for this timer to be more than 750 ms because of a bug in OPT ++ * test 5.4 in which B OPT disconnects after 750 ms instead of 75ms as stated ++ * in the test description ++ */ ++#define TA_AIDL_BDIS (5000) /* a_suspend minimum 200 ms, section: 6.6.5.3 */ ++ ++/* B-Idle to A-Disconnect */ ++#define TA_BIDL_ADIS (12) /* 3 to 200 ms */ ++ ++/* B-device timing constants */ ++ ++/* Data-Line Pulse Time*/ ++#define TB_DATA_PLS (10) /* b_srp_init,continue 5~10ms, section:5.3.3 */ ++#define TB_DATA_PLS_MIN (5) /* minimum 5 ms */ ++#define TB_DATA_PLS_MAX (10) /* maximum 10 ms */ ++ ++/* SRP Initiate Time */ ++#define TB_SRP_INIT (100) /* b_srp_init,maximum 100 ms, section:5.3.8 */ ++ ++/* SRP Fail Time */ ++#define TB_SRP_FAIL (7000) /* b_srp_init,Fail time 5~30s, section:6.8.2.2 */ ++ ++/* SRP result wait time */ ++#define TB_SRP_WAIT (60) ++ ++/* VBus time */ ++#define TB_VBUS_PLS (30) /* time to keep vbus pulsing asserted */ ++ ++/* Discharge time */ ++/* This time should be less than 10ms. It varies from system to system. */ ++#define TB_VBUS_DSCHRG (8) ++ ++/* A-SE0 to B-Reset */ ++#define TB_ASE0_BRST (20) /* b_wait_acon, mini 3.125 ms,section:6.8.2.4 */ ++ ++/* A bus suspend timer before we can switch to b_wait_aconn */ ++#define TB_A_SUSPEND (7) ++#define TB_BUS_RESUME (12) ++ ++/* SE0 Time Before SRP */ ++#define TB_SE0_SRP (2) /* b_idle,minimum 2 ms, section:5.3.2 */ ++ ++#define SET_OTG_STATE(otg_ptr, newstate) ((otg_ptr)->state = newstate) ++ ++ ++struct fsl_otg_timer { ++ unsigned long expires; /* Number of count increase to timeout */ ++ unsigned long count; /* Tick counter */ ++ void (*function) (unsigned long); /* Timeout function */ ++ unsigned long data; /* Data passed to function */ ++ struct list_head list; ++}; ++ ++struct fsl_otg_timer inline *otg_timer_initializer ++ (void (*function) (unsigned long), unsigned long expires, ++ unsigned long data) { ++ struct fsl_otg_timer *timer; ++ timer = kmalloc(sizeof(struct fsl_otg_timer), GFP_KERNEL); ++ if (timer == NULL) ++ return NULL; ++ timer->function = function; ++ timer->expires = expires; ++ timer->data = data; ++ return timer; ++} ++ ++struct fsl_otg { ++ struct otg_transceiver otg; ++ struct otg_fsm fsm; ++ struct fsl_usb_device_regs *dr_mem_map; ++ struct delayed_work otg_event; ++ ++ /*used for usb host */ ++ u8 host_working; ++ u8 on_off; ++ ++ int irq; ++}; ++ ++struct fsl_otg_config { ++ u8 otg_port; ++}; ++ ++/*For SRP and HNP handle*/ ++#define FSL_OTG_MAJOR 66 ++#define FSL_OTG_NAME "fsl-otg" ++/*Command to OTG driver(ioctl)*/ ++#define OTG_IOCTL_MAGIC FSL_OTG_MAJOR ++/*if otg work as host,it should return 1,otherwise it return 0*/ ++#define GET_OTG_STATUS _IOR(OTG_IOCTL_MAGIC, 1, int) ++#define SET_A_SUSPEND_REQ _IOW(OTG_IOCTL_MAGIC, 2, int) ++#define SET_A_BUS_DROP _IOW(OTG_IOCTL_MAGIC, 3, int) ++#define SET_A_BUS_REQ _IOW(OTG_IOCTL_MAGIC, 4, int) ++#define SET_B_BUS_REQ _IOW(OTG_IOCTL_MAGIC, 5, int) ++#define GET_A_SUSPEND_REQ _IOR(OTG_IOCTL_MAGIC, 6, int) ++#define GET_A_BUS_DROP _IOR(OTG_IOCTL_MAGIC, 7, int) ++#define GET_A_BUS_REQ _IOR(OTG_IOCTL_MAGIC, 8, int) ++#define GET_B_BUS_REQ _IOR(OTG_IOCTL_MAGIC, 9, int) ++ ++ ++/********************************************************************/ ++#endif +--- /dev/null ++++ b/drivers/usb/otg/Makefile +@@ -0,0 +1,5 @@ ++# ++# Makefile for USB OTG controller driver ++# ++fsl_usb2_otg-objs := fsl_otg.o otg_fsm.o ++obj-y += fsl_usb2_otg.o +--- /dev/null ++++ b/drivers/usb/otg/otg_fsm.c +@@ -0,0 +1,381 @@ ++/* OTG Finite State Machine from OTG spec ++ * ++ * Copyright (C) 2007 Freescale Semiconductor, Inc. ++ * ++ * Author: Li Yang <LeoLi@freescale.com> ++ * Jerry Huang <Chang-Ming.Huang@freescale.com> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/types.h> ++#include <linux/usb/otg.h> ++#include <linux/spinlock.h> ++#include <linux/delay.h> ++#include <linux/usb.h> ++#include <linux/usb_gadget.h> ++ ++#include "otg_fsm.h" ++ ++ ++/* Defined by device specific driver, for different timer implementation */ ++extern void *a_wait_vrise_tmr, *a_wait_bcon_tmr, *a_aidl_bdis_tmr, ++ *b_ase0_brst_tmr, *b_se0_srp_tmr, *b_srp_fail_tmr, *a_wait_enum_tmr; ++ ++const char *state_string(enum usb_otg_state state) ++{ ++ switch (state) { ++ case OTG_STATE_A_IDLE: return "a_idle"; ++ case OTG_STATE_A_WAIT_VRISE: return "a_wait_vrise"; ++ case OTG_STATE_A_WAIT_BCON: return "a_wait_bcon"; ++ case OTG_STATE_A_HOST: return "a_host"; ++ case OTG_STATE_A_SUSPEND: return "a_suspend"; ++ case OTG_STATE_A_PERIPHERAL: return "a_peripheral"; ++ case OTG_STATE_A_WAIT_VFALL: return "a_wait_vfall"; ++ case OTG_STATE_A_VBUS_ERR: return "a_vbus_err"; ++ case OTG_STATE_B_IDLE: return "b_idle"; ++ case OTG_STATE_B_SRP_INIT: return "b_srp_init"; ++ case OTG_STATE_B_PERIPHERAL: return "b_peripheral"; ++ case OTG_STATE_B_WAIT_ACON: return "b_wait_acon"; ++ case OTG_STATE_B_HOST: return "b_host"; ++ default: return "UNDEFINED"; ++ } ++} ++EXPORT_SYMBOL(state_string); ++ ++/* Change USB protocol when there is a protocol change */ ++static int otg_set_protocol(struct otg_fsm *fsm, int protocol) ++{ ++ int ret = 0; ++ ++ VDBG("DDD old fsm->protocol= %d; new protocol= %d\n", ++ fsm->protocol, protocol); ++ if (fsm->protocol != protocol) { ++ VDBG("Changing role fsm->protocol= %d; new protocol= %d\n", ++ fsm->protocol, protocol); ++ /* stop old protocol */ ++ if (fsm->protocol == PROTO_HOST) ++ ret = fsm->ops->start_host(fsm, 0); ++ else if (fsm->protocol == PROTO_GADGET) ++ ret = fsm->ops->start_gadget(fsm, 0); ++ if (ret) ++ return ret; ++ ++ /* start new protocol */ ++ if (protocol == PROTO_HOST) ++ ret = fsm->ops->start_host(fsm, 1); ++ else if (protocol == PROTO_GADGET) ++ ret = fsm->ops->start_gadget(fsm, 1); ++ if (ret) ++ return ret; ++ ++ fsm->protocol = protocol; ++ return 0; ++ } ++ ++ return 0; ++} ++ ++static int state_changed; ++ ++/* Called when leaving a state. Do state clean up jobs here */ ++static void otg_leave_state(struct otg_fsm *fsm, enum usb_otg_state old_state) ++{ ++ switch (old_state) { ++ case OTG_STATE_B_IDLE: ++ otg_del_timer(fsm, fsm->b_se0_srp_tmr); ++ fsm->b_se0_srp = 0; ++ break; ++ case OTG_STATE_B_SRP_INIT: ++ fsm->b_srp_done = 0; ++ break; ++ case OTG_STATE_B_PERIPHERAL: ++ break; ++ case OTG_STATE_B_WAIT_ACON: ++ otg_del_timer(fsm, fsm->b_ase0_brst_tmr); ++ fsm->b_ase0_brst_tmout = 0; ++ break; ++ case OTG_STATE_B_HOST: ++ break; ++ case OTG_STATE_A_IDLE: ++ break; ++ case OTG_STATE_A_WAIT_VRISE: ++ otg_del_timer(fsm, fsm->a_wait_vrise_tmr); ++ fsm->a_wait_vrise_tmout = 0; ++ break; ++ case OTG_STATE_A_WAIT_BCON: ++ otg_del_timer(fsm, fsm->a_wait_bcon_tmr); ++ fsm->a_wait_bcon_tmout = 0; ++ break; ++ case OTG_STATE_A_HOST: ++ otg_del_timer(fsm, fsm->a_wait_enum_tmr); ++ break; ++ case OTG_STATE_A_SUSPEND: ++ otg_del_timer(fsm, fsm->a_aidl_bdis_tmr); ++ fsm->a_aidl_bdis_tmout = 0; ++ fsm->a_suspend_req = 0; ++ fsm->a_bus_req = 1; /* FIXME */ ++ break; ++ case OTG_STATE_A_PERIPHERAL: ++ break; ++ case OTG_STATE_A_WAIT_VFALL: ++ otg_del_timer(fsm, fsm->a_wait_vrise_tmr); ++ break; ++ case OTG_STATE_A_VBUS_ERR: ++ break; ++ default: ++ break; ++ } ++} ++ ++/* Called when entering a state */ ++static int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state) ++{ ++ state_changed = 1; ++ VDBG("State: old=%s new=%s \n", ++ state_string(fsm->transceiver->state), state_string(new_state)); ++ ++ if (fsm->transceiver->state == new_state) ++ return 0; ++ ++ otg_leave_state(fsm, fsm->transceiver->state); ++ switch (new_state) { ++ case OTG_STATE_B_IDLE: ++ otg_drv_vbus(fsm, 0); ++ otg_chrg_vbus(fsm, 0); ++ otg_loc_conn(fsm, 0); ++ otg_loc_sof(fsm, 0); ++ otg_set_protocol(fsm, PROTO_UNDEF); ++ otg_add_timer(fsm, fsm->b_se0_srp_tmr); ++ break; ++ case OTG_STATE_B_SRP_INIT: ++ otg_start_pulse(fsm); ++ otg_loc_sof(fsm, 0); ++ otg_set_protocol(fsm, PROTO_UNDEF); ++ otg_add_timer(fsm, fsm->b_srp_fail_tmr); ++ break; ++ case OTG_STATE_B_PERIPHERAL: ++ otg_chrg_vbus(fsm, 0); ++ otg_loc_conn(fsm, 1); ++ otg_loc_sof(fsm, 0); ++ otg_set_protocol(fsm, PROTO_GADGET); ++ break; ++ case OTG_STATE_B_WAIT_ACON: ++ otg_chrg_vbus(fsm, 0); ++ otg_loc_conn(fsm, 0); ++ otg_loc_sof(fsm, 0); ++ otg_set_protocol(fsm, PROTO_HOST); ++ otg_add_timer(fsm, fsm->b_ase0_brst_tmr); ++ fsm->a_bus_suspend = 0; ++ break; ++ case OTG_STATE_B_HOST: ++ otg_chrg_vbus(fsm, 0); ++ otg_loc_conn(fsm, 0); ++ otg_loc_sof(fsm, 1); ++ otg_set_protocol(fsm, PROTO_HOST); ++ usb_bus_start_enum(fsm->transceiver->host, ++ fsm->transceiver->host->otg_port); ++ break; ++ case OTG_STATE_A_IDLE: ++ otg_drv_vbus(fsm, 0); ++ otg_chrg_vbus(fsm, 0); ++ otg_loc_conn(fsm, 0); ++ otg_loc_sof(fsm, 0); ++ otg_set_protocol(fsm, PROTO_HOST); ++ break; ++ case OTG_STATE_A_WAIT_VRISE: ++ otg_drv_vbus(fsm, 1); ++ otg_loc_conn(fsm, 0); ++ otg_loc_sof(fsm, 0); ++ otg_set_protocol(fsm, PROTO_HOST); ++ otg_add_timer(fsm, fsm->a_wait_vrise_tmr); ++ break; ++ case OTG_STATE_A_WAIT_BCON: ++ otg_drv_vbus(fsm, 1); ++ otg_loc_conn(fsm, 0); ++ otg_loc_sof(fsm, 0); ++ otg_set_protocol(fsm, PROTO_HOST); ++ otg_add_timer(fsm, fsm->a_wait_bcon_tmr); ++ break; ++ case OTG_STATE_A_HOST: ++ otg_drv_vbus(fsm, 1); ++ otg_loc_conn(fsm, 0); ++ otg_loc_sof(fsm, 1); ++ otg_set_protocol(fsm, PROTO_HOST); ++ /* ++ * When HNP is triggered while a_bus_req = 0, a_host will ++ * suspend too fast to complete a_set_b_hnp_en ++ */ ++ if (!fsm->a_bus_req || fsm->a_suspend_req) ++ otg_add_timer(fsm, fsm->a_wait_enum_tmr); ++ break; ++ case OTG_STATE_A_SUSPEND: ++ otg_drv_vbus(fsm, 1); ++ otg_loc_conn(fsm, 0); ++ otg_loc_sof(fsm, 0); ++ otg_set_protocol(fsm, PROTO_HOST); ++ otg_add_timer(fsm, fsm->a_aidl_bdis_tmr); ++ ++ break; ++ case OTG_STATE_A_PERIPHERAL: ++ otg_loc_conn(fsm, 1); ++ otg_loc_sof(fsm, 0); ++ otg_set_protocol(fsm, PROTO_GADGET); ++ otg_drv_vbus(fsm, 1); ++ break; ++ case OTG_STATE_A_WAIT_VFALL: ++ otg_drv_vbus(fsm, 0); ++ otg_loc_conn(fsm, 0); ++ otg_loc_sof(fsm, 0); ++ otg_set_protocol(fsm, PROTO_HOST); ++ break; ++ case OTG_STATE_A_VBUS_ERR: ++ otg_drv_vbus(fsm, 0); ++ otg_loc_conn(fsm, 0); ++ otg_loc_sof(fsm, 0); ++ otg_set_protocol(fsm, PROTO_UNDEF); ++ break; ++ default: ++ break; ++ } ++ ++ fsm->transceiver->state = new_state; ++ return 0; ++} ++ ++/* State change judgement */ ++int otg_statemachine(struct otg_fsm *fsm) ++{ ++ enum usb_otg_state state; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&fsm->lock, flags); ++ ++ state = fsm->transceiver->state; ++ state_changed = 0; ++ /* State machine state change judgement */ ++ ++ VDBG(" State: %s \n", state_string(state)); ++ ++ switch (state) { ++ case OTG_STATE_UNDEFINED: ++ if (fsm->id) ++ otg_set_state(fsm, OTG_STATE_B_IDLE); ++ else ++ otg_set_state(fsm, OTG_STATE_A_IDLE); ++ break; ++ case OTG_STATE_B_IDLE: ++ if (!fsm->id) ++ otg_set_state(fsm, OTG_STATE_A_IDLE); ++ else if (fsm->b_sess_vld && fsm->transceiver->gadget) ++ otg_set_state(fsm, OTG_STATE_B_PERIPHERAL); ++ else if (fsm->b_bus_req && fsm->b_sess_end && fsm->b_se0_srp) ++ otg_set_state(fsm, OTG_STATE_B_SRP_INIT); ++ break; ++ case OTG_STATE_B_SRP_INIT: ++ if (!fsm->id || fsm->b_srp_done) ++ otg_set_state(fsm, OTG_STATE_B_IDLE); ++ break; ++ case OTG_STATE_B_PERIPHERAL: ++ if (!fsm->id || !fsm->b_sess_vld) ++ otg_set_state(fsm, OTG_STATE_B_IDLE); ++ else if (fsm->b_bus_req && ++ fsm->transceiver-> ++ gadget->b_hnp_enable && fsm->a_bus_suspend) ++ otg_set_state(fsm, OTG_STATE_B_WAIT_ACON); ++ break; ++ case OTG_STATE_B_WAIT_ACON: ++ if (fsm->a_conn) ++ otg_set_state(fsm, OTG_STATE_B_HOST); ++ else if (!fsm->id || !fsm->b_sess_vld) ++ otg_set_state(fsm, OTG_STATE_B_IDLE); ++ else if (fsm->a_bus_resume || fsm->b_ase0_brst_tmout) { ++ fsm->b_ase0_brst_tmout = 0; ++ otg_set_state(fsm, OTG_STATE_B_PERIPHERAL); ++ } ++ break; ++ case OTG_STATE_B_HOST: ++ if (!fsm->id || !fsm->b_sess_vld) ++ otg_set_state(fsm, OTG_STATE_B_IDLE); ++ else if (!fsm->b_bus_req || !fsm->a_conn) ++ otg_set_state(fsm, OTG_STATE_B_PERIPHERAL); ++ break; ++ case OTG_STATE_A_IDLE: ++ if (fsm->id) ++ otg_set_state(fsm, OTG_STATE_B_IDLE); ++ else if (!fsm->a_bus_drop && (fsm->a_bus_req || fsm->a_srp_det)) ++ otg_set_state(fsm, OTG_STATE_A_WAIT_VRISE); ++ break; ++ case OTG_STATE_A_WAIT_VRISE: ++ if (fsm->id || fsm->a_bus_drop || fsm->a_vbus_vld || ++ fsm->a_wait_vrise_tmout) { ++ otg_set_state(fsm, OTG_STATE_A_WAIT_BCON); ++ } ++ break; ++ case OTG_STATE_A_WAIT_BCON: ++ if (!fsm->a_vbus_vld) ++ otg_set_state(fsm, OTG_STATE_A_VBUS_ERR); ++ else if (fsm->id | fsm->a_bus_drop | fsm->a_wait_bcon_tmout) ++ otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL); ++ else if (fsm->b_conn) ++ otg_set_state(fsm, OTG_STATE_A_HOST); ++ break; ++ case OTG_STATE_A_HOST: ++ if ((!fsm->a_bus_req || fsm->a_suspend_req) && ++ fsm->transceiver->host->b_hnp_enable) ++ otg_set_state(fsm, OTG_STATE_A_SUSPEND); ++ else if (fsm->id || !fsm->b_conn || fsm->a_bus_drop) ++ otg_set_state(fsm, OTG_STATE_A_WAIT_BCON); ++ else if (!fsm->a_vbus_vld) ++ otg_set_state(fsm, OTG_STATE_A_VBUS_ERR); ++ break; ++ case OTG_STATE_A_SUSPEND: ++ if (!fsm->b_conn && fsm->transceiver->host->b_hnp_enable) ++ otg_set_state(fsm, OTG_STATE_A_PERIPHERAL); ++ else if (!fsm->b_conn && !fsm->transceiver->host->b_hnp_enable) ++ otg_set_state(fsm, OTG_STATE_A_WAIT_BCON); ++ else if (fsm->a_bus_req || fsm->b_bus_resume) ++ otg_set_state(fsm, OTG_STATE_A_HOST); ++ else if (fsm->id || fsm->a_bus_drop || fsm->a_aidl_bdis_tmout) ++ otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL); ++ else if (!fsm->a_vbus_vld) ++ otg_set_state(fsm, OTG_STATE_A_VBUS_ERR); ++ break; ++ case OTG_STATE_A_PERIPHERAL: ++ if (fsm->id || fsm->a_bus_drop) ++ otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL); ++ else if (fsm->b_bus_suspend) ++ otg_set_state(fsm, OTG_STATE_A_WAIT_BCON); ++ else if (!fsm->a_vbus_vld) ++ otg_set_state(fsm, OTG_STATE_A_VBUS_ERR); ++ break; ++ case OTG_STATE_A_WAIT_VFALL: ++ if (fsm->id || fsm->a_bus_req || (!fsm->a_sess_vld && ++ !fsm->b_conn)) ++ otg_set_state(fsm, OTG_STATE_A_IDLE); ++ break; ++ case OTG_STATE_A_VBUS_ERR: ++ if (fsm->id || fsm->a_bus_drop || fsm->a_clr_err) ++ otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL); ++ break; ++ default: ++ break; ++ } ++ spin_unlock_irqrestore(&fsm->lock, flags); ++ ++ return state_changed; ++} ++EXPORT_SYMBOL(otg_statemachine); +--- /dev/null ++++ b/drivers/usb/otg/otg_fsm.h +@@ -0,0 +1,170 @@ ++/* Copyright (C) 2006-2007 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ ++ ++#ifndef OTG_FSM_H ++#define OTG_FSM_H ++ ++#if 0 ++#define DEBUG 1 ++#define VERBOSE 1 ++#endif ++ ++#ifdef DEBUG ++#define DBG(fmt, args...) printk(KERN_DEBUG "[%s] " fmt , \ ++ __FUNCTION__, ## args) ++#else ++#define DBG(fmt, args...) do {} while (0) ++#endif ++ ++#ifdef VERBOSE ++#define VDBG DBG ++#else ++#define VDBG(stuff...) do {} while (0) ++#endif ++ ++#ifdef VERBOSE ++#define MPC_LOC printk("Current Location [%s]:[%d]\n", __FILE__, __LINE__) ++#else ++#define MPC_LOC do {} while (0) ++#endif ++ ++#define PROTO_UNDEF 0 ++#define PROTO_HOST 1 ++#define PROTO_GADGET 2 ++ ++ ++ ++ ++ ++/* OTG state machine according to the OTG spec */ ++struct otg_fsm { ++ /* Input */ ++ int a_bus_resume; ++ int a_bus_suspend; ++ int a_conn; ++ int a_sess_vld; ++ int a_srp_det; ++ int a_vbus_vld; ++ int b_bus_resume; ++ int b_bus_suspend; ++ int b_conn; ++ int b_se0_srp; ++ int b_sess_end; ++ int b_sess_vld; ++ int id; ++ ++ /* Internal variables */ ++ int a_set_b_hnp_en; ++ int b_srp_done; ++ int b_hnp_enable; ++ ++ /* Timeout indicator for timers */ ++ int a_wait_vrise_tmout; ++ int a_wait_bcon_tmout; ++ int a_aidl_bdis_tmout; ++ int b_ase0_brst_tmout; ++ ++ /* Informative variables */ ++ int a_bus_drop; ++ int a_bus_req; ++ int a_clr_err; ++ int a_suspend_req; ++ int b_bus_req; ++ ++ /* Output */ ++ int drv_vbus; ++ int loc_conn; ++ int loc_sof; ++ ++ struct otg_fsm_ops *ops; ++ struct otg_transceiver *transceiver; ++ ++ void *a_wait_vrise_tmr; ++ void *a_wait_bcon_tmr; ++ void *a_aidl_bdis_tmr; ++ void *b_ase0_brst_tmr; ++ void *b_se0_srp_tmr; ++ void *b_srp_fail_tmr; ++ void *a_wait_enum_tmr; ++ ++ /* Current usb protocol used: 0:undefine; 1:host; 2:client */ ++ int protocol; ++ spinlock_t lock; /* fsm lock */ ++}; ++ ++struct otg_fsm_ops { ++ void (*chrg_vbus)(int on); ++ void (*drv_vbus)(int on); ++ void (*loc_conn)(int on); ++ void (*loc_sof)(int on); ++ void (*start_pulse)(void); ++ void (*add_timer)(void *timer); ++ void (*del_timer)(void *timer); ++ int (*start_host)(struct otg_fsm *fsm, int on); ++ int (*start_gadget)(struct otg_fsm *fsm, int on); ++}; ++ ++ ++static inline void otg_chrg_vbus(struct otg_fsm *fsm, int on) ++{ ++ fsm->ops->chrg_vbus(on); ++} ++ ++static inline void otg_drv_vbus(struct otg_fsm *fsm, int on) ++{ ++ if (fsm->drv_vbus != on) { ++ fsm->drv_vbus = on; ++ fsm->ops->drv_vbus(on); ++ } ++} ++ ++static inline void otg_loc_conn(struct otg_fsm *fsm, int on) ++{ ++ if (fsm->loc_conn != on) { ++ fsm->loc_conn = on; ++ fsm->ops->loc_conn(on); ++ } ++} ++ ++static inline void otg_loc_sof(struct otg_fsm *fsm, int on) ++{ ++ if (fsm->loc_sof != on) { ++ fsm->loc_sof = on; ++ fsm->ops->loc_sof(on); ++ } ++} ++ ++static inline void otg_start_pulse(struct otg_fsm *fsm) ++{ ++ fsm->ops->start_pulse(); ++} ++ ++static inline void otg_add_timer(struct otg_fsm *fsm, void *timer) ++{ ++ fsm->ops->add_timer(timer); ++} ++ ++static inline void otg_del_timer(struct otg_fsm *fsm, void *timer) ++{ ++ fsm->ops->del_timer(timer); ++} ++ ++extern int otg_statemachine(struct otg_fsm *fsm); ++ ++extern const char *state_string(enum usb_otg_state state); ++ ++#endif +--- a/drivers/video/cfbimgblt.c ++++ b/drivers/video/cfbimgblt.c +@@ -44,12 +44,12 @@ + #endif + + static const u32 cfb_tab8[] = { +-#if defined(__BIG_ENDIAN) ++#if defined(__BIG_ENDIAN) && !defined(CONFIG_COLDFIRE) + 0x00000000,0x000000ff,0x0000ff00,0x0000ffff, + 0x00ff0000,0x00ff00ff,0x00ffff00,0x00ffffff, + 0xff000000,0xff0000ff,0xff00ff00,0xff00ffff, + 0xffff0000,0xffff00ff,0xffffff00,0xffffffff +-#elif defined(__LITTLE_ENDIAN) ++#elif defined(__LITTLE_ENDIAN) || defined(CONFIG_COLDFIRE) + 0x00000000,0xff000000,0x00ff0000,0xffff0000, + 0x0000ff00,0xff00ff00,0x00ffff00,0xffffff00, + 0x000000ff,0xff0000ff,0x00ff00ff,0xffff00ff, +@@ -60,9 +60,9 @@ static const u32 cfb_tab8[] = { + }; + + static const u32 cfb_tab16[] = { +-#if defined(__BIG_ENDIAN) ++#if defined(__BIG_ENDIAN) && !defined(CONFIG_COLDFIRE) + 0x00000000, 0x0000ffff, 0xffff0000, 0xffffffff +-#elif defined(__LITTLE_ENDIAN) ++#elif defined(__LITTLE_ENDIAN) || defined(CONFIG_COLDFIRE) + 0x00000000, 0xffff0000, 0x0000ffff, 0xffffffff + #else + #error FIXME: No endianness?? +--- a/drivers/video/console/bitblit.c ++++ b/drivers/video/console/bitblit.c +@@ -78,7 +78,11 @@ static inline void bit_putcs_aligned(str + u32 d_pitch, u32 s_pitch, u32 cellsize, + struct fb_image *image, u8 *buf, u8 *dst) + { ++#ifndef CONFIG_COLDFIRE + u16 charmask = vc->vc_hi_font_mask ? 0x1ff : 0xff; ++#else ++ u32 charmask = vc->vc_hi_font_mask ? 0x1ff : 0xff; ++#endif + u32 idx = vc->vc_font.width >> 3; + u8 *src; + +@@ -111,7 +115,11 @@ static inline void bit_putcs_unaligned(s + struct fb_image *image, u8 *buf, + u8 *dst) + { ++#ifndef CONFIG_COLDFIRE + u16 charmask = vc->vc_hi_font_mask ? 0x1ff : 0xff; ++#else ++ u32 charmask = vc->vc_hi_font_mask ? 0x1ff : 0xff; ++#endif + u32 shift_low = 0, mod = vc->vc_font.width % 8; + u32 shift_high = 8; + u32 idx = vc->vc_font.width >> 3; +@@ -238,7 +246,11 @@ static void bit_cursor(struct vc_data *v + { + struct fb_cursor cursor; + struct fbcon_ops *ops = info->fbcon_par; ++#ifndef CONFIG_COLDFIRE + unsigned short charmask = vc->vc_hi_font_mask ? 0x1ff : 0xff; ++#else ++ unsigned long charmask = vc->vc_hi_font_mask ? 0x1ff : 0xff; ++#endif + int w = (vc->vc_font.width + 7) >> 3, c; + int y = real_y(ops->p, vc->vc_y); + int attribute, use_sw = (vc->vc_cursor_type & 0x10); +--- a/drivers/video/console/fbcon.c ++++ b/drivers/video/console/fbcon.c +@@ -2679,8 +2679,11 @@ static int fbcon_set_palette(struct vc_d + { + struct fb_info *info = registered_fb[con2fb_map[vc->vc_num]]; + int i, j, k, depth; +- u8 val; +- ++#ifndef CONFIG_COLDFIRE ++ u8 val; ++#else ++ u32 val; ++#endif + if (fbcon_is_inactive(vc, info)) + return -EINVAL; + +--- a/drivers/video/Kconfig ++++ b/drivers/video/Kconfig +@@ -201,6 +201,16 @@ config FB_TILEBLITTING + comment "Frame buffer hardware drivers" + depends on FB + ++config FB_SMI ++ tristate "SiliconMotion Lynx support" ++ depends on FB && PCI ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ ---help--- ++ This enables support for the Silicon Motion Lynx family of graphic ++ chips. It has been tested on ColdFire. ++ + config FB_CIRRUS + tristate "Cirrus Logic support" + depends on FB && (ZORRO || PCI) +--- a/drivers/video/Makefile ++++ b/drivers/video/Makefile +@@ -28,6 +28,7 @@ obj-$(CONFIG_FB_DDC) += fb_ddc + obj-$(CONFIG_FB_DEFERRED_IO) += fb_defio.o + + # Hardware specific drivers go first ++obj-$(CONFIG_FB_SMI) += smifb.o + obj-$(CONFIG_FB_AMIGA) += amifb.o c2p.o + obj-$(CONFIG_FB_ARC) += arcfb.o + obj-$(CONFIG_FB_CLPS711X) += clps711xfb.o +--- /dev/null ++++ b/drivers/video/smifb.c +@@ -0,0 +1,949 @@ ++/*************************************************************************** ++ smifb.c - Silicon Motion, Inc. LynxEM+ frame buffer device ++ ------------------- ++ begin : Thu Aug 9 2001 ++ copyright : (C) 2001 by Szu-Tao Huang ++ email : johuang@siliconmotion.com ++ ***************************************************************************/ ++ ++/*************************************************************************** ++ * * ++ * This program is free software; you can redistribute it and/or modify * ++ * it under the terms of the GNU General Public License as published by * ++ * the Free Software Foundation; either version 2 of the License, or * ++ * (at your option) any later version. * ++ * * ++ ***************************************************************************/ ++ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/errno.h> ++#include <linux/string.h> ++#include <linux/mm.h> ++#include <linux/tty.h> ++#include <linux/slab.h> ++#include <linux/delay.h> ++#include <linux/fb.h> ++#include <linux/pci.h> ++#include <linux/init.h> ++ ++#include <asm/io.h> ++#include <asm/irq.h> ++#include <asm/pgtable.h> ++#include <asm/system.h> ++#include <asm/uaccess.h> ++ ++#include "console/fbcon.h" ++ ++/* ++#include <video/fbcon.h> ++#include <video/fbcon-cfb8.h> ++#include <video/fbcon-cfb16.h> ++#include <video/fbcon-cfb24.h> ++*/ ++ ++#include <linux/fb.h> ++ ++static char *SMIRegs; // point to virtual Memory Map IO starting address ++static char *SMILFB; // point to virtual video memory starting address ++static struct par_info hw; // used to record hardware information ++ ++#include "smifb.h" ++ ++struct ModeInit VGAMode[numVGAModes] = ++{ ++ { ++ /* mode#0: 640 x 480 8Bpp 60Hz */ ++ 640, 480, 8, 60, ++ /* Init_MISC */ ++ 0xE3, ++ { /* Init_SR0_SR4 */ ++ 0x03, 0x01, 0x0F, 0x00, 0x0E, ++ }, ++ { /* Init_SR10_SR24 */ ++ 0xFF, 0xBE, 0xEF, 0xFF, 0x00, 0x0E, 0x17, 0x2C, ++ 0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, ++ 0xC4, 0x30, 0x02, 0x01, 0x01, ++ }, ++ { /* Init_SR30_SR75 */ ++ 0x32, 0x03, 0xA0, 0x09, 0xC0, 0x32, 0x32, 0x32, ++ 0x32, 0x32, 0x32, 0x32, 0x00, 0x00, 0x03, 0xFF, ++ 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC, ++ 0x20, 0x0C, 0x44, 0x20, 0x00, 0x32, 0x32, 0x32, ++ 0x04, 0x24, 0x63, 0x4F, 0x52, 0x0B, 0xDF, 0xEA, ++ 0x04, 0x50, 0x19, 0x32, 0x32, 0x00, 0x00, 0x32, ++ 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00, ++ 0x50, 0x03, 0x74, 0x14, 0x07, 0x82, 0x07, 0x04, ++ 0x00, 0x45, 0x30, 0x30, 0x40, 0x30, ++ }, ++ { /* Init_SR80_SR93 */ ++ 0xFF, 0x07, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x32, ++ 0xF7, 0x00, 0x00, 0x00, 0xEF, 0xFF, 0x32, 0x32, ++ 0x00, 0x00, 0x00, 0x00, ++ }, ++ { /* Init_SRA0_SRAF */ ++ 0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED, ++ 0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xFF, 0xDF, ++ }, ++ { /* Init_GR00_GR08 */ ++ 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, ++ 0xFF, ++ }, ++ { /* Init_AR00_AR14 */ ++ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, ++ 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, ++ 0x41, 0x00, 0x0F, 0x00, 0x00, ++ }, ++ { /* Init_CR00_CR18 */ ++ 0x5F, 0x4F, 0x4F, 0x00, 0x53, 0x1F, 0x0B, 0x3E, ++ 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, ++ 0xEA, 0x0C, 0xDF, 0x50, 0x40, 0xDF, 0x00, 0xE3, ++ 0xFF, ++ }, ++ { /* Init_CR30_CR4D */ ++ 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0x03, 0x20, ++ 0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xFF, 0xFD, ++ 0x5F, 0x4F, 0x00, 0x54, 0x00, 0x0B, 0xDF, 0x00, ++ 0xEA, 0x0C, 0x2E, 0x00, 0x4F, 0xDF, ++ }, ++ { /* Init_CR90_CRA7 */ ++ 0x56, 0xDD, 0x5E, 0xEA, 0x87, 0x44, 0x8F, 0x55, ++ 0x0A, 0x8F, 0x55, 0x0A, 0x00, 0x00, 0x18, 0x00, ++ 0x11, 0x10, 0x0B, 0x0A, 0x0A, 0x0A, 0x0A, 0x00, ++ }, ++ }, ++ { ++ /* mode#1: 640 x 480 16Bpp 60Hz */ ++ 640, 480, 16, 60, ++ /* Init_MISC */ ++ 0xE3, ++ { /* Init_SR0_SR4 */ ++ 0x03, 0x01, 0x0F, 0x00, 0x0E, ++ }, ++ { /* Init_SR10_SR24 */ ++ 0xFF, 0xBE, 0xEF, 0xFF, 0x00, 0x0E, 0x17, 0x2C, ++ 0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, ++ 0xC4, 0x30, 0x02, 0x01, 0x01, ++ }, ++ { /* Init_SR30_SR75 */ ++ 0x32, 0x03, 0xA0, 0x09, 0xC0, 0x32, 0x32, 0x32, ++ 0x32, 0x32, 0x32, 0x32, 0x00, 0x00, 0x03, 0xFF, ++ 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC, ++ 0x20, 0x0C, 0x44, 0x20, 0x00, 0x32, 0x32, 0x32, ++ 0x04, 0x24, 0x63, 0x4F, 0x52, 0x0B, 0xDF, 0xEA, ++ 0x04, 0x50, 0x19, 0x32, 0x32, 0x00, 0x00, 0x32, ++ 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00, ++ 0x50, 0x03, 0x74, 0x14, 0x07, 0x82, 0x07, 0x04, ++ 0x00, 0x45, 0x30, 0x30, 0x40, 0x30, ++ }, ++ { /* Init_SR80_SR93 */ ++ 0xFF, 0x07, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x32, ++ 0xF7, 0x00, 0x00, 0x00, 0xEF, 0xFF, 0x32, 0x32, ++ 0x00, 0x00, 0x00, 0x00, ++ }, ++ { /* Init_SRA0_SRAF */ ++ 0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED, ++ 0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xFF, 0xDF, ++ }, ++ { /* Init_GR00_GR08 */ ++ 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, ++ 0xFF, ++ }, ++ { /* Init_AR00_AR14 */ ++ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, ++ 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, ++ 0x41, 0x00, 0x0F, 0x00, 0x00, ++ }, ++ { /* Init_CR00_CR18 */ ++ 0x5F, 0x4F, 0x4F, 0x00, 0x53, 0x1F, 0x0B, 0x3E, ++ 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, ++ 0xEA, 0x0C, 0xDF, 0x50, 0x40, 0xDF, 0x00, 0xE3, ++ 0xFF, ++ }, ++ { /* Init_CR30_CR4D */ ++ 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0x03, 0x20, ++ 0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xFF, 0xFD, ++ 0x5F, 0x4F, 0x00, 0x54, 0x00, 0x0B, 0xDF, 0x00, ++ 0xEA, 0x0C, 0x2E, 0x00, 0x4F, 0xDF, ++ }, ++ { /* Init_CR90_CRA7 */ ++ 0x56, 0xDD, 0x5E, 0xEA, 0x87, 0x44, 0x8F, 0x55, ++ 0x0A, 0x8F, 0x55, 0x0A, 0x00, 0x00, 0x18, 0x00, ++ 0x11, 0x10, 0x0B, 0x0A, 0x0A, 0x0A, 0x0A, 0x00, ++ }, ++ }, ++ { ++ /* mode#2: 640 x 480 24Bpp 60Hz */ ++ 640, 480, 24, 60, ++ /* Init_MISC */ ++ 0xE3, ++ { /* Init_SR0_SR4 */ ++ 0x03, 0x01, 0x0F, 0x00, 0x0E, ++ }, ++ { /* Init_SR10_SR24 */ ++ 0xFF, 0xBE, 0xEF, 0xFF, 0x00, 0x0E, 0x17, 0x2C, ++ 0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, ++ 0xC4, 0x30, 0x02, 0x01, 0x01, ++ }, ++ { /* Init_SR30_SR75 */ ++ 0x32, 0x03, 0xA0, 0x09, 0xC0, 0x32, 0x32, 0x32, ++ 0x32, 0x32, 0x32, 0x32, 0x00, 0x00, 0x03, 0xFF, ++ 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC, ++ 0x20, 0x0C, 0x44, 0x20, 0x00, 0x32, 0x32, 0x32, ++ 0x04, 0x24, 0x63, 0x4F, 0x52, 0x0B, 0xDF, 0xEA, ++ 0x04, 0x50, 0x19, 0x32, 0x32, 0x00, 0x00, 0x32, ++ 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00, ++ 0x50, 0x03, 0x74, 0x14, 0x07, 0x82, 0x07, 0x04, ++ 0x00, 0x45, 0x30, 0x30, 0x40, 0x30, ++ }, ++ { /* Init_SR80_SR93 */ ++ 0xFF, 0x07, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x32, ++ 0xF7, 0x00, 0x00, 0x00, 0xEF, 0xFF, 0x32, 0x32, ++ 0x00, 0x00, 0x00, 0x00, ++ }, ++ { /* Init_SRA0_SRAF */ ++ 0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED, ++ 0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xFF, 0xDF, ++ }, ++ { /* Init_GR00_GR08 */ ++ 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, ++ 0xFF, ++ }, ++ { /* Init_AR00_AR14 */ ++ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, ++ 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, ++ 0x41, 0x00, 0x0F, 0x00, 0x00, ++ }, ++ { /* Init_CR00_CR18 */ ++ 0x5F, 0x4F, 0x4F, 0x00, 0x53, 0x1F, 0x0B, 0x3E, ++ 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, ++ 0xEA, 0x0C, 0xDF, 0x50, 0x40, 0xDF, 0x00, 0xE3, ++ 0xFF, ++ }, ++ { /* Init_CR30_CR4D */ ++ 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0x03, 0x20, ++ 0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xFF, 0xFD, ++ 0x5F, 0x4F, 0x00, 0x54, 0x00, 0x0B, 0xDF, 0x00, ++ 0xEA, 0x0C, 0x2E, 0x00, 0x4F, 0xDF, ++ }, ++ { /* Init_CR90_CRA7 */ ++ 0x56, 0xDD, 0x5E, 0xEA, 0x87, 0x44, 0x8F, 0x55, ++ 0x0A, 0x8F, 0x55, 0x0A, 0x00, 0x00, 0x18, 0x00, ++ 0x11, 0x10, 0x0B, 0x0A, 0x0A, 0x0A, 0x0A, 0x00, ++ }, ++ }, ++ {/* mode#3: 800 x 600 8Bpp 60Hz */ ++ 800,600,8,60, ++ 0x2B, /* Init_MISC */ ++ { /* Init_SR0_SR4 */ ++ 0x03, 0x01, 0x0F, 0x03, 0x0E, ++ }, ++ { /* Init_SR10_SR24 */ ++ 0xFF, 0xBE, 0xEE, 0xFF, 0x00, 0x0E, 0x17, 0x2C, ++ 0x99, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, ++ 0xC4, 0x30, 0x02, 0x01, 0x01, ++ }, ++ { /* Init_SR30_SR75 */ ++ 0x24, 0x03, 0x20, 0x09, 0xC0, 0x24, 0x24, 0x24, ++ 0x24, 0x24, 0x24, 0x24, 0x00, 0x00, 0x03, 0xFF, ++ 0x00, 0xFC, 0x00, 0x00, 0x20, 0x38, 0x00, 0xFC, ++ 0x20, 0x0C, 0x44, 0x20, 0x00, 0x24, 0x24, 0x24, ++ 0x04, 0x48, 0x83, 0x63, 0x68, 0x72, 0x57, 0x58, ++ 0x04, 0x55, 0x59, 0x24, 0x24, 0x00, 0x00, 0x24, ++ 0x01, 0x80, 0x7A, 0x1A, 0x1A, 0x00, 0x00, 0x00, ++ 0x50, 0x03, 0x74, 0x14, 0x1C, 0x85, 0x35, 0x13, ++ 0x02, 0x45, 0x30, 0x35, 0x40, 0x20, ++ }, ++ { /* Init_SR80_SR93 */ ++ 0xFF, 0x87, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x24, ++ 0x90, 0x01, 0x2C, 0x01, 0xFF, 0x00, 0x24, 0x24, ++ 0x00, 0x00, 0x00, 0x00, ++ }, ++ { /* Init_SRA0_SRAF */ ++ 0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED, ++ 0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xBF, 0xDF, ++ }, ++ { /* Init_GR00_GR08 */ ++ 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, ++ 0xFF, ++ }, ++ { /* Init_AR00_AR14 */ ++ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, ++ 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, ++ 0x41, 0x00, 0x0F, 0x00, 0x00, ++ }, ++ { /* Init_CR00_CR18 */ ++ 0x7F, 0x63, 0x63, 0x00, 0x68, 0x18, 0x72, 0xF0, ++ 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, ++ 0x58, 0x0C, 0x57, 0x64, 0x40, 0x57, 0x00, 0xE3, ++ 0xFF, ++ }, ++ { /* Init_CR30_CR4D */ ++ 0x00, 0x00, 0x00, 0x00, 0x00, 0x33, 0x03, 0x20, ++ 0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xBF, 0xFD, ++ 0x7F, 0x63, 0x00, 0x69, 0x18, 0x72, 0x57, 0x00, ++ 0x58, 0x0C, 0xE0, 0x20, 0x63, 0x57, ++ }, ++ { /* Init_CR90_CRA7 */ ++ 0x56, 0x4B, 0x5E, 0x55, 0x86, 0x9D, 0x8E, 0xAA, ++ 0xDB, 0x2A, 0xDF, 0x33, 0x00, 0x00, 0x18, 0x00, ++ 0x20, 0x1F, 0x1A, 0x19, 0x0F, 0x0F, 0x0F, 0x00, ++ }, ++ }, ++ {/* mode#4: 800 x 600 16Bpp 60Hz */ ++ 800, 600, 16, 60, ++ /* Init_MISC */ ++ 0x2B, ++ { /* Init_SR0_SR4 */ ++ 0x03, 0x01, 0x0F, 0x03, 0x0E, ++ }, ++ { /* Init_SR10_SR24 */ ++ 0xFF, 0xBE, 0xEE, 0xFF, 0x00, 0x0E, 0x17, 0x2C, ++ 0x99, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, ++ 0xC4, 0x30, 0x02, 0x01, 0x01, ++ }, ++ { /* Init_SR30_SR75 */ ++ 0x24, 0x03, 0x20, 0x09, 0xC0, 0x24, 0x24, 0x24, ++ 0x24, 0x24, 0x24, 0x24, 0x00, 0x00, 0x03, 0xFF, ++ 0x00, 0xFC, 0x00, 0x00, 0x20, 0x38, 0x00, 0xFC, ++ 0x20, 0x0C, 0x44, 0x20, 0x00, 0x24, 0x24, 0x24, ++ 0x04, 0x48, 0x83, 0x63, 0x68, 0x72, 0x57, 0x58, ++ 0x04, 0x55, 0x59, 0x24, 0x24, 0x00, 0x00, 0x24, ++ 0x01, 0x80, 0x7A, 0x1A, 0x1A, 0x00, 0x00, 0x00, ++ 0x50, 0x03, 0x74, 0x14, 0x1C, 0x85, 0x35, 0x13, ++ 0x02, 0x45, 0x30, 0x35, 0x40, 0x20, ++ }, ++ { /* Init_SR80_SR93 */ ++ 0x00, 0x00, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x24, ++ 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x24, 0x24, ++ 0x00, 0x00, 0x00, 0x00, ++ }, ++ { /* Init_SRA0_SRAF */ ++ 0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED, ++ 0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xBF, 0xDF, ++ }, ++ { /* Init_GR00_GR08 */ ++ 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, ++ 0xFF, ++ }, ++ { /* Init_AR00_AR14 */ ++ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, ++ 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, ++ 0x41, 0x00, 0x0F, 0x00, 0x00, ++ }, ++ { /* Init_CR00_CR18 */ ++ 0x7F, 0x63, 0x63, 0x00, 0x68, 0x18, 0x72, 0xF0, ++ 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, ++ 0x58, 0x0C, 0x57, 0x64, 0x40, 0x57, 0x00, 0xE3, ++ 0xFF, ++ }, ++ { /* Init_CR30_CR4D */ ++ 0x00, 0x00, 0x00, 0x00, 0x00, 0x33, 0x03, 0x20, ++ 0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xBF, 0xFD, ++ 0x7F, 0x63, 0x00, 0x69, 0x18, 0x72, 0x57, 0x00, ++ 0x58, 0x0C, 0xE0, 0x20, 0x63, 0x57, ++ }, ++ { /* Init_CR90_CRA7 */ ++ 0x56, 0x4B, 0x5E, 0x55, 0x86, 0x9D, 0x8E, 0xAA, ++ 0xDB, 0x2A, 0xDF, 0x33, 0x00, 0x00, 0x18, 0x00, ++ 0x20, 0x1F, 0x1A, 0x19, 0x0F, 0x0F, 0x0F, 0x00, ++ }, ++ }, ++ {/* mode#5: 800 x 600 24Bpp 60Hz */ ++ 800,600,24,60, ++ 0x2B, ++ { /* Init_SR0_SR4 */ ++ 0x03, 0x01, 0x0F, 0x03, 0x0E, ++ }, ++ { /* Init_SR10_SR24 */ ++ 0xFF, 0xBE, 0xEE, 0xFF, 0x00, 0x0E, 0x17, 0x2C, ++ 0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, ++ 0xC4, 0x30, 0x02, 0x01, 0x01, ++ }, ++ { /* Init_SR30_SR75 */ ++ 0x36, 0x03, 0x20, 0x09, 0xC0, 0x36, 0x36, 0x36, ++ 0x36, 0x36, 0x36, 0x36, 0x00, 0x00, 0x03, 0xFF, ++ 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC, ++ 0x20, 0x0C, 0x44, 0x20, 0x00, 0x36, 0x36, 0x36, ++ 0x04, 0x48, 0x83, 0x63, 0x68, 0x72, 0x57, 0x58, ++ 0x04, 0x55, 0x59, 0x36, 0x36, 0x00, 0x00, 0x36, ++ 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00, ++ 0x50, 0x03, 0x74, 0x14, 0x1C, 0x85, 0x35, 0x13, ++ 0x02, 0x45, 0x30, 0x30, 0x40, 0x20, ++ }, ++ { /* Init_SR80_SR93 */ ++ 0xFF, 0x07, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x36, ++ 0xF7, 0x00, 0x00, 0x00, 0xEF, 0xFF, 0x36, 0x36, ++ 0x00, 0x00, 0x00, 0x00, ++ }, ++ { /* Init_SRA0_SRAF */ ++ 0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED, ++ 0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xBF, 0xDF, ++ }, ++ { /* Init_GR00_GR08 */ ++ 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, ++ 0xFF, ++ }, ++ { /* Init_AR00_AR14 */ ++ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, ++ 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, ++ 0x41, 0x00, 0x0F, 0x00, 0x00, ++ }, ++ { /* Init_CR00_CR18 */ ++ 0x7F, 0x63, 0x63, 0x00, 0x68, 0x18, 0x72, 0xF0, ++ 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, ++ 0x58, 0x0C, 0x57, 0x64, 0x40, 0x57, 0x00, 0xE3, ++ 0xFF, ++ }, ++ { /* Init_CR30_CR4D */ ++ 0x00, 0x00, 0x00, 0x00, 0x00, 0x33, 0x03, 0x20, ++ 0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xBF, 0xFD, ++ 0x7F, 0x63, 0x00, 0x69, 0x18, 0x72, 0x57, 0x00, ++ 0x58, 0x0C, 0xE0, 0x20, 0x63, 0x57, ++ }, ++ { /* Init_CR90_CRA7 */ ++ 0x56, 0x4B, 0x5E, 0x55, 0x86, 0x9D, 0x8E, 0xAA, ++ 0xDB, 0x2A, 0xDF, 0x33, 0x00, 0x00, 0x18, 0x00, ++ 0x20, 0x1F, 0x1A, 0x19, 0x0F, 0x0F, 0x0F, 0x00, ++ }, ++ }, ++}; ++ ++static void smi_set_timing(struct smifb_info *sfb,struct par_info *hw) ++{ ++ int i=0,j=0; ++ u32 m_nScreenStride; ++ ++ ++ for (j=0;j < numVGAModes;j++) { ++ if (VGAMode[j].mmSizeX == hw->width && ++ VGAMode[j].mmSizeY == hw->height && ++ VGAMode[j].bpp == sfb->fb.var.bits_per_pixel && ++ VGAMode[j].hz == hw->hz) ++ { ++ ++ smi_mmiowb(0x0,0x3c6); ++ ++ smi_seqw(0,0x1); ++ ++ smi_mmiowb(VGAMode[j].Init_MISC,0x3c2); ++ ++ for (i=0;i<SIZE_SR00_SR04;i++) // init SEQ register SR00 - SR04 ++ { ++ smi_seqw(i,VGAMode[j].Init_SR00_SR04[i]); ++ } ++ ++ for (i=0;i<SIZE_SR10_SR24;i++) // init SEQ register SR10 - SR24 ++ { ++ smi_seqw(i+0x10,VGAMode[j].Init_SR10_SR24[i]); ++ } ++ ++ for (i=0;i<SIZE_SR30_SR75;i++) // init SEQ register SR30 - SR75 ++ { ++ if (((i+0x30) != 0x62) && ((i+0x30) != 0x6a) && ((i+0x30) != 0x6b)) ++ smi_seqw(i+0x30,VGAMode[j].Init_SR30_SR75[i]); ++ } ++ for (i=0;i<SIZE_SR80_SR93;i++) // init SEQ register SR80 - SR93 ++ { ++ smi_seqw(i+0x80,VGAMode[j].Init_SR80_SR93[i]); ++ } ++ for (i=0;i<SIZE_SRA0_SRAF;i++) // init SEQ register SRA0 - SRAF ++ { ++ smi_seqw(i+0xa0,VGAMode[j].Init_SRA0_SRAF[i]); ++ } ++ ++ for (i=0;i<SIZE_GR00_GR08;i++) // init Graphic register GR00 - GR08 ++ { ++ smi_grphw(i,VGAMode[j].Init_GR00_GR08[i]); ++ } ++ ++ for (i=0;i<SIZE_AR00_AR14;i++) // init Attribute register AR00 - AR14 ++ { ++ ++ smi_attrw(i,VGAMode[j].Init_AR00_AR14[i]); ++ } ++ ++ for (i=0;i<SIZE_CR00_CR18;i++) // init CRTC register CR00 - CR18 ++ { ++ smi_crtcw(i,VGAMode[j].Init_CR00_CR18[i]); ++ } ++ ++ for (i=0;i<SIZE_CR30_CR4D;i++) // init CRTC register CR30 - CR4D ++ { ++ smi_crtcw(i+0x30,VGAMode[j].Init_CR30_CR4D[i]); ++ } ++ ++ for (i=0;i<SIZE_CR90_CRA7;i++) // init CRTC register CR90 - CRA7 ++ { ++ smi_crtcw(i+0x90,VGAMode[j].Init_CR90_CRA7[i]); ++ } ++ } ++ } ++ smi_mmiowb(0x67,0x3c2); ++ // set VPR registers ++ writel(0x0,hw->m_pVPR+0x0C); ++ writel(0x0,hw->m_pVPR+0x40); ++ // set data width ++ m_nScreenStride = (hw->width * sfb->fb.var.bits_per_pixel) / 64; ++ switch (sfb->fb.var.bits_per_pixel) ++ { ++ case 8: ++ writel(0x0,hw->m_pVPR+0x0); ++ break; ++ case 16: ++ writel(0x00020000,hw->m_pVPR+0x0); ++ break; ++ case 24: ++ writel(0x00040000,hw->m_pVPR+0x0); ++ break; ++ } ++ writel((u32)(((m_nScreenStride + 2) << 16) | m_nScreenStride),hw->m_pVPR+0x10); ++} ++ ++/* ++ * Set the color palette ++ */ ++static int ++smifb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, ++ u_int trans, struct fb_info *info) ++{ ++ ++ struct smifb_info *sfb = (struct smifbinfo *)info; ++ u32 *pal; ++ ++ switch (sfb->fb.fix.visual) { ++ case FB_VISUAL_TRUECOLOR: /* RGB 5:6:5 True Colour */ ++ pal = sfb->fb.pseudo_palette; // System has 16 default color ++ if (regno >= 16) ++ return 1; ++ ++ pal[regno] = (red & 0xf800) | ++ ((green & 0xfc00) >> 5) | ((blue & 0xf800) >> 11); ++ break; ++ } ++ ++ return 0; ++} ++ ++/* ++ * smifb_decode_var(): ++ * Get the video params out of 'var'. If a value doesn't fit, round it up, ++ * if it's too big, return -EINVAL. ++ * ++ * Suggestion: Round up in the following order: bits_per_pixel, xres, ++ * yres, xres_virtual, yres_virtual, xoffset, yoffset, grayscale, ++ * bitfields, horizontal timing, vertical timing. ++ */ ++static int smifb_decode_var(struct fb_var_screeninfo *var, struct smifb_info *sfb, struct par_info *hw) ++{ ++ hw->width = var->xres; ++ hw->height = var->yres; ++ hw->hz = 60; ++ ++ return 0; ++} ++ ++static int smifb_set_par (struct fb_info *info) ++{ ++ struct smifb_info *sfb = (struct smifb_info *)info; ++ int err, chgvar = 0; ++ struct fb_var_screeninfo *var = &info->var; ++ struct fb_cmap *cmap; ++ ++ ++ /* ++ * Decode var contents into a par structure, adjusting any ++ * out of range values. ++ */ ++ err = smifb_decode_var(var, sfb, &hw); ++ if (err) { ++ return err; ++ } ++ ++ if (hw.width != var->xres) ++ chgvar = 1; ++ if (hw.height != var->yres) ++ chgvar = 1; ++ ++ var->activate &= ~FB_ACTIVATE_ALL; ++ ++ smi_set_timing(sfb, &hw); ++ ++ sfb->palette_size = var->bits_per_pixel == 8 ? 256 : 16; ++ cmap = fb_default_cmap(sfb->palette_size); ++ fb_set_cmap(cmap, &sfb->fb); ++ ++ return 0; ++} ++ ++static int smifb_check_var (struct fb_var_screeninfo *var, struct fb_info *info) ++{ ++ var->bits_per_pixel += 7; ++ var->bits_per_pixel &= ~7; ++ ++ var->xres_virtual = ++ var->xres_virtual < var->xres ? var->xres : var->xres_virtual; ++ var->yres_virtual = ++ var->yres_virtual < var->yres ? var->yres : var->yres_virtual; ++ ++ switch (var->bits_per_pixel) { ++ case 8: ++ case 16: /* RGB 565 */ ++ case 24: ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ switch (var->bits_per_pixel) { ++ case 16: ++ var->red.offset = 11; ++ var->red.length = 5; ++ var->green.offset = 5; ++ var->green.length = 6; ++ var->blue.offset = 0; ++ var->blue.length = 5; ++ ++ info->fix.visual = FB_VISUAL_TRUECOLOR; ++ info->fix.line_length= var->xres * 2; ++ ++ break; ++ default: ++ return -EINVAL; /* We don't support anything other than 16bpp for now. --NL */ ++ break; ++ } ++ return 0; ++ ++// smifb_set_color_bitfields(var); ++ ++ return 0; ++} ++ ++/* ++ * Formal definition of the VESA spec: ++ * On ++ * This refers to the state of the display when it is in full operation ++ * Stand-By ++ * This defines an optional operating state of minimal power reduction with ++ * the shortest recovery time ++ * Suspend ++ * This refers to a level of power management in which substantial power ++ * reduction is achieved by the display. The display can have a longer ++ * recovery time from this state than from the Stand-by state ++ * Off ++ * This indicates that the display is consuming the lowest level of power ++ * and is non-operational. Recovery from this state may optionally require ++ * the user to manually power on the monitor ++ * ++ * Now, the fbdev driver adds an additional state, (blank), where they ++ * turn off the video (maybe by colormap tricks), but don't mess with the ++ * video itself: think of it semantically between on and Stand-By. ++ * ++ * So here's what we should do in our fbdev blank routine: ++ * ++ * VESA_NO_BLANKING (mode 0) Video on, front/back light on ++ * VESA_VSYNC_SUSPEND (mode 1) Video on, front/back light off ++ * VESA_HSYNC_SUSPEND (mode 2) Video on, front/back light off ++ * VESA_POWERDOWN (mode 3) Video off, front/back light off ++ * ++ * This will match the matrox implementation. ++ */ ++/* ++ * smifb_blank(): ++ * Blank the display by setting all palette values to zero. Note, the ++ * 12 and 16 bpp modes don't really use the palette, so this will not ++ * blank the display in all modes. ++ */ ++static int smifb_blank(int blank, struct fb_info *info) ++{ ++// struct smifb_info *sfb = (struct smifb_info *)info; ++#if 0 ++ switch (blank) { ++ case VESA_POWERDOWN: ++ case VESA_VSYNC_SUSPEND: ++ case VESA_HSYNC_SUSPEND: ++ case VESA_NO_BLANKING: ++ } ++#endif ++ return 1; ++} ++ ++static struct fb_ops smifb_ops = { ++ .owner = THIS_MODULE, ++ .fb_check_var = smifb_check_var, ++ .fb_set_par = smifb_set_par, ++ .fb_setcolreg = smifb_setcolreg, ++ .fb_blank = smifb_blank, ++ ++ /* Accelerated functions, using softversions, per se */ ++ .fb_fillrect = cfb_fillrect, ++ .fb_copyarea = cfb_copyarea, ++ .fb_imageblit = cfb_imageblit, ++ .fb_cursor = soft_cursor, ++}; ++ ++/* ++ * Alloc struct smifb_info and assign the default value ++ */ ++static struct smifb_info * __devinit ++smi_alloc_fb_info(struct pci_dev *dev, char *name) ++{ ++ struct smifb_info *sfb; ++ ++ sfb = kmalloc(sizeof(struct smifb_info) + sizeof(u32) * 16, GFP_KERNEL); ++ ++ if (!sfb) ++ return NULL; ++ ++ memset(sfb, 0, sizeof(struct smifb_info)); ++ ++ sfb->currcon = -1; ++ sfb->dev = dev; ++ ++ strcpy(sfb->fb.fix.id, name); ++ ++ sfb->fb.fix.type = FB_TYPE_PACKED_PIXELS; ++ sfb->fb.fix.type_aux = 0; ++ sfb->fb.fix.xpanstep = 0; ++ sfb->fb.fix.ypanstep = 0; ++ sfb->fb.fix.ywrapstep = 0; ++ sfb->fb.fix.accel = FB_ACCEL_NONE; ++ ++ sfb->fb.var.nonstd = 0; ++ sfb->fb.var.activate = FB_ACTIVATE_NOW; ++ sfb->fb.var.height = -1; ++ sfb->fb.var.width = -1; ++ sfb->fb.var.accel_flags = 0; ++ sfb->fb.var.vmode = FB_VMODE_NONINTERLACED; ++ ++ sfb->fb.fbops = &smifb_ops; ++ sfb->fb.flags = FBINFO_FLAG_DEFAULT; ++ sfb->fb.node = -1; ++ sfb->fb.pseudo_palette = (void *)(&sfb->palette_size + 1); ++ ++ return sfb; ++} ++ ++/* ++ * Unmap in the memory mapped IO registers ++ * ++ */ ++ ++static void __devinit ++smi_unmap_mmio(struct smifb_info *sfb) ++{ ++ if (sfb && SMILFB) ++ { ++ iounmap(SMILFB); ++ SMIRegs = NULL; ++ } ++} ++ ++/* ++ * Map in the screen memory ++ * ++ */ ++static int __devinit ++smi_map_smem(struct smifb_info *sfb, struct pci_dev *dev, u_long smem_len) ++{ ++ ++ sfb->fb.fix.smem_start = pci_resource_start(dev, 0); ++ sfb->fb.fix.smem_len = smem_len; ++ printk("%s:smem %x,len %x\n",sfb->fb.fix.smem_start,sfb->fb.fix.smem_len); ++ sfb->fb.screen_base = SMILFB; ++ ++ if (!sfb->fb.screen_base) ++ { ++ printk("%s: unable to map screen memory\n",sfb->fb.fix.id); ++ return -ENOMEM; ++ } ++ ++ return 0; ++} ++ ++ ++/* ++ * Unmap in the screen memory ++ * ++ */ ++static void __devinit ++smi_unmap_smem(struct smifb_info *sfb) ++{ ++ if (sfb && sfb->fb.screen_base) ++ { ++ iounmap(sfb->fb.screen_base); ++ sfb->fb.screen_base = NULL; ++ } ++} ++ ++/* ++ * We need to wake up the LynxEM+, and make sure its in linear memory mode. ++ */ ++static inline void __devinit ++smi_init_hw(void) ++{ ++ /* The delays prevent the ColdFire PCI host from locking up. :/ --NL */ ++ udelay(1000); ++ outb(0x18, 0x3c4); ++ udelay(1000); ++ outb(0x11, 0x3c5); ++ udelay(1000); ++ printk("%s: 0x3c4 =%x 0x3c5 %x\n",__FUNCTION__,inw(0x3c4),inw(0x3c5)); ++} ++ ++static void __devinit ++smi_free_fb_info(struct smifb_info *sfb) ++{ ++ if (sfb) { ++ fb_alloc_cmap(&sfb->fb.cmap, 0, 0); ++ kfree(sfb); ++ } ++} ++ ++ ++u16 SMI_ChipIDs[numChipIDs] = {0x710, 0x712, 0x720}; ++ ++int __init smifb_init(struct pci_dev *pdev, const struct pci_device_id *ent) ++{ ++ struct smifb_info *sfb; ++ u_long smem_size; ++ char name[16]; ++ int err; ++ char *m_pLAW; ++ ulong m_pLAWPhysical; ++ ++ printk("%s start\n",__FUNCTION__); ++ sprintf(name, "smifb"); ++ ++ hw.chipID = pdev->device; ++ ++ err = -ENOMEM; ++ sfb = smi_alloc_fb_info(pdev, name); ++ if (!sfb) { ++ goto failed; ++ } ++ ++ smi_init_hw(); ++ ++ // Map address and memory detection ++ m_pLAWPhysical = pci_resource_start(pdev,0); ++ printk("%s:m_pLAWPhysical %x,hw.chipID %x\n",__FUNCTION__,m_pLAWPhysical,hw.chipID); ++ switch (hw.chipID) { ++ case 0x710: ++ case 0x712: ++ sfb->fb.fix.mmio_start = m_pLAWPhysical + 0x00700000; ++ sfb->fb.fix.mmio_len = 0x00100000; ++ ++ hw.m_pLFB = SMILFB = ioremap(m_pLAWPhysical, 0x00800000); ++ printk("%s:SMILFB%x\n",__FUNCTION__,SMILFB); ++ hw.m_pMMIO = SMIRegs = SMILFB + 0x00700000; ++ hw.m_pDPR = hw.m_pLFB + 0x00408000; ++ hw.m_pVPR = hw.m_pLFB + 0x0040c000; ++ ++ if (!SMIRegs) ++ { ++ printk("%s: unable to map memory mapped IO\n",sfb->fb.fix.id); ++ return -ENOMEM; ++ } ++ ++ smi_seqw(0x62,0x7A); ++ smi_seqw(0x6a,0x0c); ++ smi_seqw(0x6b,0x02); ++ smem_size = 0x00400000; ++ ++ //LynxEM+ memory dection ++ *(u32 *)(SMILFB + 4) = 0xAA551133; ++ if (*(u32 *)(SMILFB + 4) != 0xAA551133) ++ { ++ smem_size = 0x00200000; ++ // Program the MCLK to 130 MHz ++ smi_seqw(0x6a,0x12); ++ smi_seqw(0x6b,0x02); ++ smi_seqw(0x62,0x3e); ++ } ++ break; ++ case 0x720: ++ sfb->fb.fix.mmio_start = m_pLAWPhysical + 0x000c0000; ++ sfb->fb.fix.mmio_len = 0x00040000; ++ ++ m_pLAW = ioremap(m_pLAWPhysical, 0x00a00000); ++ hw.m_pLFB = SMILFB = m_pLAW + 0x00200000; ++ hw.m_pMMIO = SMIRegs = m_pLAW + 0x000c0000; ++ hw.m_pDPR = m_pLAW; ++ hw.m_pVPR = m_pLAW + 0x800; ++ ++ smi_seqw(0x62,0xff); ++ smi_seqw(0x6a,0x0d); ++ smi_seqw(0x6b,0x02); ++ smem_size = 0x00400000; ++ ++ break; ++ } ++ ++ sfb->fb.var.xres = 640; ++ sfb->fb.var.yres = 480; ++ sfb->fb.var.bits_per_pixel = 16; ++ ++ sfb->fb.var.xres_virtual = sfb->fb.var.xres; ++ ++ sfb->fb.var.yres_virtual = sfb->fb.var.yres; ++ ++ sfb->fb.flags = FBINFO_FLAG_DEFAULT; ++ ++ printk("%s:smem_size %x\n",__FUNCTION__,smem_size); ++ err = smi_map_smem(sfb, pdev, smem_size); ++ printk("%s:smi_map_smem error %x\n",__FUNCTION__,err); ++ if (err) { ++ goto failed; ++ } ++ ++ ++ ++ fb_set_var(&sfb->fb, &sfb->fb.var); ++ smifb_check_var(&sfb->fb.var, &sfb->fb); ++ smifb_set_par(sfb); ++ printk("%s:register_framebuffer \n",__FUNCTION__); ++ err = register_framebuffer(&sfb->fb); ++ if (err < 0) { ++ goto failed; ++ } ++ ++ printk("Silicon Motion, Inc. LynxEM+ Init complete.\n"); ++ ++ return 0; ++ ++failed: ++ smi_unmap_smem(sfb); ++ smi_unmap_mmio(sfb); ++ smi_free_fb_info(sfb); ++ printk("Silicon Motion, Inc. LynxEM+ Init FAILED.n"); ++ ++ return err; ++} ++ ++struct pci_device_id smifb_pci_tbl[] = { ++ { 0x126f, 0x710, PCI_ANY_ID, PCI_ANY_ID }, ++ { 0x126f, 0x712, PCI_ANY_ID, PCI_ANY_ID }, ++ { 0x126f, 0x720, PCI_ANY_ID, PCI_ANY_ID }, ++ { 0 } ++}; ++ ++MODULE_DEVICE_TABLE(pci, smifb_pci_tbl); ++ ++struct pci_driver smifb_driver = { ++ .name = "smifb", ++ .id_table = smifb_pci_tbl, ++ .probe = smifb_init, ++}; ++ ++int __init smi_init(void) ++{ ++ /*return pci_module_init(&smifb_driver);*/ ++ return pci_register_driver(&smifb_driver); ++} ++ ++module_init(smi_init); ++MODULE_LICENSE("GPL"); ++ ++ ++ +--- /dev/null ++++ b/drivers/video/smifb.h +@@ -0,0 +1,149 @@ ++/*************************************************************************** ++ smifb.h - SiliconMotion LynxEM+ frame buffer device ++ ------------------- ++ begin : Thu Aug 9 2001 ++ copyright : (C) 2001 by Szu-Tao Huang ++ email : johuang@siliconmotion.com ++ ***************************************************************************/ ++ ++/*************************************************************************** ++ * * ++ * This program is free software; you can redistribute it and/or modify * ++ * it under the terms of the GNU General Public License as published by * ++ * the Free Software Foundation; either version 2 of the License, or * ++ * (at your option) any later version. * ++ * * ++ ***************************************************************************/ ++ ++#define smi_mmiowb(dat,reg) writeb(dat, SMIRegs + reg) ++#define smi_mmioww(dat,reg) writew(dat, SMIRegs + reg) ++#define smi_mmiowl(dat,reg) writel(dat, SMIRegs + reg) ++ ++#define smi_mmiorb(reg) readb(SMIRegs + reg) ++#define smi_mmiorw(reg) readw(SMIRegs + reg) ++#define smi_mmiorl(reg) readl(SMIRegs + reg) ++ ++#define SIZE_SR00_SR04 (0x04 - 0x00 + 1) ++#define SIZE_SR10_SR24 (0x24 - 0x10 + 1) ++#define SIZE_SR30_SR75 (0x75 - 0x30 + 1) ++#define SIZE_SR80_SR93 (0x93 - 0x80 + 1) ++#define SIZE_SRA0_SRAF (0xAF - 0xA0 + 1) ++#define SIZE_GR00_GR08 (0x08 - 0x00 + 1) ++#define SIZE_AR00_AR14 (0x14 - 0x00 + 1) ++#define SIZE_CR00_CR18 (0x18 - 0x00 + 1) ++#define SIZE_CR30_CR4D (0x4D - 0x30 + 1) ++#define SIZE_CR90_CRA7 (0xA7 - 0x90 + 1) ++#define SIZE_VPR (0x6C + 1) ++#define SIZE_DPR (0x44 + 1) ++ ++#define numVGAModes 6 ++#define numChipIDs 3 ++ ++#define NR_PALETTE 256 ++#define NR_RGB 2 ++ ++/* ++ * Minimum X and Y resolutions ++ */ ++#define MIN_XRES 640 ++#define MIN_YRES 480 ++ ++static inline void smi_crtcw(int reg, int val) ++{ ++ smi_mmiowb(reg, 0x3d4); ++ smi_mmiowb(val, 0x3d5); ++} ++ ++static inline unsigned int smi_crtcr(int reg) ++{ ++ smi_mmiowb(reg, 0x3d4); ++ return smi_mmiorb(0x3d5); ++} ++ ++static inline void smi_grphw(int reg, int val) ++{ ++ smi_mmiowb(reg, 0x3ce); ++ smi_mmiowb(val, 0x3cf); ++} ++ ++static inline unsigned int smi_grphr(int reg) ++{ ++ smi_mmiowb(reg, 0x3ce); ++ return smi_mmiorb(0x3cf); ++} ++ ++static inline void smi_attrw(int reg, int val) ++{ ++ smi_mmiorb(0x3da); ++ smi_mmiowb(reg, 0x3c0); ++ smi_mmiorb(0x3c1); ++ smi_mmiowb(val, 0x3c0); ++} ++ ++static inline void smi_seqw(int reg, int val) ++{ ++ smi_mmiowb(reg, 0x3c4); ++ smi_mmiowb(val, 0x3c5); ++} ++ ++static inline unsigned int smi_seqr(int reg) ++{ ++ smi_mmiowb(reg, 0x3c4); ++ return smi_mmiorb(0x3c5); ++} ++/* ++* Private structure ++*/ ++struct smifb_info { ++ /* ++ * The following is a pointer to be passed into the ++ * functions below. The modules outside the main ++ * smifb.c driver have no knowledge as to what ++ * is within this structure. ++ */ ++ struct fb_info fb; ++ struct display_switch *dispsw; ++ struct pci_dev *dev; ++ signed int currcon; ++ ++ struct { ++ u8 red, green, blue; ++ } palette[NR_RGB]; ++ ++ u_int palette_size; ++}; ++ ++struct par_info { ++ /* ++ * Hardware ++ */ ++ u16 chipID; ++ char *m_pLFB; ++ char *m_pMMIO; ++ char *m_pDPR; ++ char *m_pVPR; ++ ++ u_int width; ++ u_int height; ++ u_int hz; ++}; ++ ++// The next structure holds all information relevant for a specific video mode. ++struct ModeInit ++{ ++ int mmSizeX; ++ int mmSizeY; ++ int bpp; ++ int hz; ++ unsigned char Init_MISC; ++ unsigned char Init_SR00_SR04[SIZE_SR00_SR04]; ++ unsigned char Init_SR10_SR24[SIZE_SR10_SR24]; ++ unsigned char Init_SR30_SR75[SIZE_SR30_SR75]; ++ unsigned char Init_SR80_SR93[SIZE_SR80_SR93]; ++ unsigned char Init_SRA0_SRAF[SIZE_SRA0_SRAF]; ++ unsigned char Init_GR00_GR08[SIZE_GR00_GR08]; ++ unsigned char Init_AR00_AR14[SIZE_AR00_AR14]; ++ unsigned char Init_CR00_CR18[SIZE_CR00_CR18]; ++ unsigned char Init_CR30_CR4D[SIZE_CR30_CR4D]; ++ unsigned char Init_CR90_CRA7[SIZE_CR90_CRA7]; ++}; +--- a/drivers/watchdog/Kconfig ++++ b/drivers/watchdog/Kconfig +@@ -672,6 +672,15 @@ config TXX9_WDT + + # PARISC Architecture + ++# ColdFire Architecture ++ ++config COLDFIRE_WATCHDOG ++ tristate "ColdFire watchdog support" ++ depends on WATCHDOG ++ help ++ To compile this driver as a module, choose M here: the ++ module will be called softdog. ++ + # POWERPC Architecture + + config MPC5200_WDT +--- a/drivers/watchdog/Makefile ++++ b/drivers/watchdog/Makefile +@@ -86,6 +86,7 @@ obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc + # M32R Architecture + + # M68K Architecture ++obj-$(CONFIG_COLDFIRE_WATCHDOG) += mcf_wdt.o + + # M68KNOMMU Architecture + +--- /dev/null ++++ b/drivers/watchdog/mcf_wdt.c +@@ -0,0 +1,220 @@ ++/* ++ * drivers/watchdog/mcf_wdt.c ++ * ++ * Watchdog driver for ColdFire processors ++ * ++ * Adapted from the IXP4xx watchdog driver. ++ * The original version carries these notices: ++ * ++ * Author: Deepak Saxena <dsaxena@plexity.net> ++ * ++ * Copyright 2004 (c) MontaVista, Software, Inc. ++ * Based on sa1100 driver, Copyright (C) 2000 Oleg Drokin <green@crimea.edu> ++ * ++ * This file is licensed under the terms of the GNU General Public ++ * License version 2. This program is licensed "as is" without any ++ * warranty of any kind, whether express or implied. ++ */ ++ ++#include <linux/module.h> ++#include <linux/moduleparam.h> ++#include <linux/types.h> ++#include <linux/kernel.h> ++#include <linux/fs.h> ++#include <linux/miscdevice.h> ++#include <linux/watchdog.h> ++#include <linux/init.h> ++#include <linux/bitops.h> ++ ++#include <asm-m68k/uaccess.h> ++#include <asm-m68k/coldfire.h> ++#include <asm-m68k/m5485gpt.h> ++ ++static int nowayout; ++static unsigned int heartbeat = 30; /* (secs) Default is 0.5 minute */ ++static unsigned long wdt_status; ++ ++#define WDT_IN_USE 0 ++#define WDT_OK_TO_CLOSE 1 ++ ++static unsigned long wdt_tick_rate; ++ ++static void ++wdt_enable(void) ++{ ++ MCF_GPT_GMS0 = 0; ++ MCF_GPT_GCIR0 = MCF_GPT_GCIR_PRE(heartbeat*wdt_tick_rate) | ++ MCF_GPT_GCIR_CNT(0xffff); ++ MCF_GPT_GMS0 = MCF_GPT_GMS_OCPW(0xA5) | MCF_GPT_GMS_WDEN | ++ MCF_GPT_GMS_CE | MCF_GPT_GMS_TMS_GPIO; ++} ++ ++static void ++wdt_disable(void) ++{ ++ MCF_GPT_GMS0 = 0; ++} ++ ++static void ++wdt_keepalive(void) ++{ ++ MCF_GPT_GMS0 = MCF_GPT_GMS_OCPW(0xA5) | MCF_GPT_GMS0; ++} ++ ++static int ++mcf_wdt_open(struct inode *inode, struct file *file) ++{ ++ if (test_and_set_bit(WDT_IN_USE, &wdt_status)) ++ return -EBUSY; ++ ++ clear_bit(WDT_OK_TO_CLOSE, &wdt_status); ++ ++ wdt_enable(); ++ ++ return nonseekable_open(inode, file); ++} ++ ++static ssize_t ++mcf_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos) ++{ ++ if (len) { ++ if (!nowayout) { ++ size_t i; ++ ++ clear_bit(WDT_OK_TO_CLOSE, &wdt_status); ++ ++ for (i = 0; i != len; i++) { ++ char c; ++ ++ if (get_user(c, data + i)) ++ return -EFAULT; ++ if (c == 'V') ++ set_bit(WDT_OK_TO_CLOSE, &wdt_status); ++ } ++ } ++ wdt_keepalive(); ++ } ++ ++ return len; ++} ++ ++ ++static struct watchdog_info ident = { ++ .options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | ++ WDIOF_KEEPALIVEPING, ++ .identity = "Coldfire Watchdog", ++}; ++ ++static int ++mcf_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, ++ unsigned long arg) ++{ ++ int ret = -ENOIOCTLCMD; ++ int time; ++ ++ switch (cmd) { ++ case WDIOC_GETSUPPORT: ++ ret = copy_to_user((struct watchdog_info *)arg, &ident, ++ sizeof(ident)) ? -EFAULT : 0; ++ break; ++ ++ case WDIOC_GETSTATUS: ++ ret = put_user(0, (int *)arg); ++ break; ++ ++ case WDIOC_GETBOOTSTATUS: ++ ret = put_user(0, (int *)arg); ++ break; ++ ++ case WDIOC_SETTIMEOUT: ++ ret = get_user(time, (int *)arg); ++ if (ret) ++ break; ++ ++ if (time <= 0 || time > 30) { ++ ret = -EINVAL; ++ break; ++ } ++ ++ heartbeat = time; ++ wdt_enable(); ++ /* Fall through */ ++ ++ case WDIOC_GETTIMEOUT: ++ ret = put_user(heartbeat, (int *)arg); ++ break; ++ ++ case WDIOC_KEEPALIVE: ++ wdt_keepalive(); ++ ret = 0; ++ break; ++ } ++ ++ return ret; ++} ++ ++static int ++mcf_wdt_release(struct inode *inode, struct file *file) ++{ ++ if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) { ++ wdt_disable(); ++ } else { ++ printk(KERN_CRIT "WATCHDOG: Device closed unexpectdly - " ++ "timer will not stop\n"); ++ } ++ ++ clear_bit(WDT_IN_USE, &wdt_status); ++ clear_bit(WDT_OK_TO_CLOSE, &wdt_status); ++ ++ return 0; ++} ++ ++ ++static struct file_operations mcf_wdt_fops = { ++ .owner = THIS_MODULE, ++ .llseek = no_llseek, ++ .write = mcf_wdt_write, ++ .ioctl = mcf_wdt_ioctl, ++ .open = mcf_wdt_open, ++ .release = mcf_wdt_release, ++}; ++ ++static struct miscdevice mcf_wdt_miscdev = { ++ .minor = WATCHDOG_MINOR, ++ .name = "watchdog", ++ .fops = &mcf_wdt_fops, ++}; ++ ++static int __init mcf_wdt_init(void) ++{ ++ wdt_tick_rate = MCF_BUSCLK/0xffff; ++#ifdef CONFIG_WATCHDOG_NOWAYOUT ++ nowayout = 1; ++#else ++ nowayout = 0; ++#endif ++ printk("ColdFire watchdog driver is loaded.\n"); ++ ++ return misc_register(&mcf_wdt_miscdev); ++} ++ ++static void __exit mcf_wdt_exit(void) ++{ ++ misc_deregister(&mcf_wdt_miscdev); ++} ++ ++module_init(mcf_wdt_init); ++module_exit(mcf_wdt_exit); ++ ++MODULE_AUTHOR("Deepak Saxena"); ++MODULE_DESCRIPTION("ColdFire Watchdog"); ++ ++module_param(heartbeat, int, 0); ++MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds (default 60s)"); ++ ++module_param(nowayout, int, 0); ++MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"); ++ ++MODULE_LICENSE("GPL"); ++MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); ++ +--- a/fs/namespace.c ++++ b/fs/namespace.c +@@ -1364,7 +1364,11 @@ int copy_mount_options(const void __user + /* copy_from_user cannot cross TASK_SIZE ! */ + size = TASK_SIZE - (unsigned long)data; + if (size > PAGE_SIZE) ++#ifndef CONFIG_COLDFIRE + size = PAGE_SIZE; ++#else ++ size = PAGE_SIZE - ((unsigned long)data & ~PAGE_MASK); ++#endif + + i = size - exact_copy_from_user((void *)page, data, size); + if (!i) { +--- /dev/null ++++ b/include/asm-m68k/5445x_pci.h +@@ -0,0 +1,94 @@ ++/* ++ * asm-m68k/pci.h - m68k specific PCI declarations. ++ * ++ * Coldfire Implementation Copyright (c) 2007 Freescale Semiconductor, Inc. ++ * Kurt Mahan <kmahan@freescale.com> ++ */ ++#ifndef _ASM_M68K_5445X_PCI_H ++#define _ASM_M68K_5445x_PCI_H ++ ++#ifndef CONFIG_PCI ++/* ++ * The PCI address space does equal the physical memory ++ * address space. The networking and block device layers use ++ * this boolean for bounce buffer decisions. ++ */ ++#define PCI_DMA_BUS_IS_PHYS (1) ++#else ++#include <asm-generic/pci-dma-compat.h> ++ ++/* ++ * The PCI address space does equal the physical memory ++ * address space. The networking and block device layers use ++ * this boolean for bounce buffer decisions. ++ */ ++#define PCI_DMA_BUS_IS_PHYS (1) ++ ++#define PCIBIOS_MIN_IO 0x00004000 ++#define PCIBIOS_MIN_MEM 0x02000000 ++ ++#define pcibios_assign_all_busses() 0 ++#define pcibios_scan_all_fns(a, b) 0 ++ ++static inline void ++pcibios_set_master(struct pci_dev *dev) ++{ ++ /* no special bus mastering setup handling */ ++} ++ ++static inline void ++pcibios_penalize_isa_irq(int irq, int active) ++{ ++ /* no dynamic PCI IRQ allocation */ ++} ++ ++#if 0 ++static inline void ++pcibios_add_platform_entries(struct pci_dev *dev) ++{ ++ /* no special handling */ ++} ++#endif ++ ++static inline void ++pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, ++ struct resource *res) ++{ ++#ifdef CONFIG_M54455 ++ if ((res->start == 0xa0000000) || (res->start == 0xa8000000)) { ++ /* HACK! FIX! kludge to fix bridge mapping */ ++ region->start = res->start & 0x0fffffff; ++ region->end = res->end & 0x0fffffff; ++ } else { ++ region->start = res->start; ++ region->end = res->end; ++ } ++#else ++ region->start = res->start; ++ region->end = res->end; ++#endif ++} ++ ++static inline void ++pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, ++ struct pci_bus_region *region) ++{ ++ res->start = region->start; ++ res->end = region->end; ++} ++ ++static inline struct resource * ++pcibios_select_root(struct pci_dev *pdev, struct resource *res) ++{ ++ struct resource *root = NULL; ++ ++ if (res->flags & IORESOURCE_IO) ++ root = &ioport_resource; ++ if (res->flags & IORESOURCE_MEM) ++ root = &iomem_resource; ++ ++ return root; ++} ++ ++#endif /* CONFIG_PCI */ ++#endif /* _ASM_M68K_5445X_PCI_H */ +--- /dev/null ++++ b/include/asm-m68k/548x_pci.h +@@ -0,0 +1,99 @@ ++#ifndef _ASM_M68K_548X_PCI_H ++#define _ASM_M68K_548X_PCI_H ++ ++/* ++ * asm-m68k/pci_m68k.h - m68k specific PCI declarations. ++ * ++ * Written by Wout Klaren. ++ */ ++#include <linux/mm.h> ++#include <asm/scatterlist.h> ++ ++#include <asm-generic/pci.h> ++ ++struct pci_ops; ++ ++/* ++ * Structure with hardware dependent information and functions of the ++ * PCI bus. ++ */ ++ ++struct pci_bus_info ++{ ++ /* ++ * Resources of the PCI bus. ++ */ ++ ++ struct resource mem_space; ++ struct resource io_space; ++ ++ /* ++ * System dependent functions. ++ */ ++ ++ struct pci_ops *m68k_pci_ops; ++ ++ void (*fixup)(int pci_modify); ++ void (*conf_device)(struct pci_dev *dev); ++}; ++ ++#define pcibios_assign_all_busses() 0 ++#define pcibios_scan_all_fns(a, b) 0 ++ ++static inline void pcibios_set_master(struct pci_dev *dev) ++{ ++ /* No special bus mastering setup handling */ ++} ++ ++static inline void pcibios_penalize_isa_irq(int irq) ++{ ++ /* We don't do dynamic PCI IRQ allocation */ ++} ++ ++#ifndef CONFIG_COLDFIRE ++/* The PCI address space does equal the physical memory ++ * address space. The networking and block device layers use ++ * this boolean for bounce buffer decisions. ++ */ ++#define PCI_DMA_BUS_IS_PHYS (1) ++ ++#define PCIBIOS_MIN_IO 0x00004000 ++#define PCIBIOS_MIN_MEM 0x04000000 ++ ++#else /* !CONFIG_COLDFIRE */ ++#include <asm-generic/pci-dma-compat.h> ++#define PCI_DMA_BASE /*0x40000000*/0 /* PCI-DMA window base */ ++ ++extern struct pci_bus_info *__init init_coldfire_pci(void); ++extern void * pci_alloc_son(struct pci_dev *, size_t, ++ dma_addr_t *, int); ++/* ++ * The PCI address space equal the virtual memory ++ * address space on m547X/m548X. ++ */ ++#define PCI_DMA_BUS_IS_PHYS (1) ++ ++#define PCIBIOS_MIN_IO 0x00000100 ++#define PCIBIOS_MIN_MEM 0x02000000 ++ ++struct scatterlist; ++ ++ ++/* This is always fine. */ ++#define pci_dac_dma_supported(pci_dev, mask) (1) ++ ++ ++/* These macros should be used after a pci_map_sg call has been done ++ * to get bus addresses of each of the SG entries and their lengths. ++ * You should only work with the number of sg entries pci_map_sg ++ * returns. ++ */ ++#define sg_dma_address(sg) ((sg)->dma_address) ++#define sg_dma_len(sg) ((sg)->length) ++ ++static inline void pcibios_align_resource(void *data, struct resource *res, unsigned long size, unsigned long align) ++{ ++} ++ ++#endif /* !CONFIG_COLDFIRE*/ ++#endif /* _ASM_M68K_548X_PCI_H */ +--- a/include/asm-m68k/atomic.h ++++ b/include/asm-m68k/atomic.h +@@ -2,7 +2,7 @@ + #define __ARCH_M68K_ATOMIC__ + + +-#include <asm/system.h> ++#include <asm/system.h> /* local_irq_XXX() */ + + /* + * Atomic operations that C can't guarantee us. Useful for +@@ -21,12 +21,20 @@ typedef struct { int counter; } atomic_t + + static inline void atomic_add(int i, atomic_t *v) + { ++#ifndef CONFIG_COLDFIRE + __asm__ __volatile__("addl %1,%0" : "+m" (*v) : "id" (i)); ++#else ++ __asm__ __volatile__("addl %1,%0" : "=m" (*v) : "d" (i), "m" (*v)); ++#endif + } + + static inline void atomic_sub(int i, atomic_t *v) + { ++#ifndef CONFIG_COLDFIRE + __asm__ __volatile__("subl %1,%0" : "+m" (*v) : "id" (i)); ++#else ++ __asm__ __volatile__("subl %1,%0" : "=m" (*v) : "d" (i), "m" (*v)); ++#endif + } + + static inline void atomic_inc(atomic_t *v) +@@ -46,6 +54,14 @@ static inline int atomic_dec_and_test(at + return c != 0; + } + ++static __inline__ int atomic_dec_and_test_lt(volatile atomic_t *v) ++{ ++ char c; ++ __asm__ __volatile__("subql #1,%1; slt %0" : "=d" (c), "=m" (*v) ++ : "m" (*v)); ++ return c != 0 ; ++} ++ + static inline int atomic_inc_and_test(atomic_t *v) + { + char c; +@@ -156,7 +172,12 @@ static inline int atomic_sub_and_test(in + static inline int atomic_add_negative(int i, atomic_t *v) + { + char c; ++#ifndef CONFIG_COLDFIRE + __asm__ __volatile__("addl %2,%1; smi %0" : "=d" (c), "+m" (*v): "g" (i)); ++#else ++ __asm__ __volatile__("addl %2,%1; smi %0" : "=d" (c), "=m" (*v) ++ : "d" (i) , "m" (*v)); ++#endif + return c != 0; + } + +--- a/include/asm-m68k/auxvec.h ++++ b/include/asm-m68k/auxvec.h +@@ -1,4 +1,13 @@ + #ifndef __ASMm68k_AUXVEC_H + #define __ASMm68k_AUXVEC_H ++/* ++ * Architecture-neutral AT_ values in 0-17, leave some room ++ * for more of them. ++ */ ++ ++#ifdef CONFIG_VSYSCALL ++/* Entry point to the vsyscall page */ ++#define AT_SYSINFO_EHDR 33 ++#endif + + #endif +--- a/include/asm-m68k/bitops.h ++++ b/include/asm-m68k/bitops.h +@@ -19,6 +19,7 @@ + * + * They use the standard big-endian m680x0 bit ordering. + */ ++#ifndef CONFIG_COLDFIRE + + #define test_and_set_bit(nr,vaddr) \ + (__builtin_constant_p(nr) ? \ +@@ -457,4 +458,503 @@ static inline int ext2_find_next_bit(con + + #endif /* __KERNEL__ */ + ++#else /* CONFIG_COLDFIRE */ ++ ++#define test_and_set_bit(nr,vaddr) \ ++ (__builtin_constant_p(nr) ? \ ++ __constant_coldfire_test_and_set_bit(nr, vaddr) : \ ++ __generic_coldfire_test_and_set_bit(nr, vaddr)) ++ ++#if 0 ++static __inline__ int __constant_coldfire_test_and_set_bit(int nr, ++ volatile void *vaddr) ++{ ++ char retval; ++ volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3]; ++ ++ __asm__ __volatile__ ("bset %2,%1; sne %0" ++ : "=d" (retval), "+QUd" (*p) ++ : "di" (nr & 7)); ++ return retval; ++} ++#else ++static __inline__ int __constant_coldfire_test_and_set_bit(int nr, ++ volatile void *vaddr) ++{ ++ char retval; ++ volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3]; ++ __asm__ __volatile__ ("bset %2,(%4); sne %0" ++ : "=d" (retval), "=m" (*p) ++ : "di" (nr & 7), "m" (*p), "a" (p)); ++ return retval; ++} ++#endif ++ ++static __inline__ int __generic_coldfire_test_and_set_bit(int nr, ++ volatile void *vaddr) ++{ ++ char retval; ++ ++ __asm__ __volatile__ ("bset %2,%1; sne %0" ++ : "=d" (retval), "=m" (((volatile char *)vaddr)[(nr^31) >> 3]) ++ : "d" (nr) ++ : "memory"); ++ return retval; ++} ++#define __test_and_set_bit(nr, vaddr) test_and_set_bit(nr, vaddr) ++ ++#define set_bit(nr,vaddr) \ ++ (__builtin_constant_p(nr) ? \ ++ __constant_coldfire_set_bit(nr, vaddr) : \ ++ __generic_coldfire_set_bit(nr, vaddr)) ++ ++#if 0 ++static __inline__ void __constant_coldfire_set_bit(int nr, ++ volatile void *vaddr) ++{ ++ volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3]; ++ __asm__ __volatile__ ("bset %1,%0" ++ : "+QUd" (*p) : "di" (nr & 7)); ++} ++#else ++static __inline__ void __constant_coldfire_set_bit(int nr, ++ volatile void *vaddr) ++{ ++ volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3]; ++ __asm__ __volatile__ ("bset %1,(%3)" ++ : "=m" (*p) : "di" (nr & 7), "m" (*p), "a" (p)); ++} ++#endif ++ ++static __inline__ void __generic_coldfire_set_bit(int nr, ++ volatile void *vaddr) ++{ ++ __asm__ __volatile__ ("bset %1,%0" ++ : "=m" (((volatile char *)vaddr)[(nr^31) >> 3]) ++ : "d" (nr) ++ : "memory"); ++} ++#define __set_bit(nr, vaddr) set_bit(nr, vaddr) ++ ++#define test_and_clear_bit(nr, vaddr) \ ++ (__builtin_constant_p(nr) ? \ ++ __constant_coldfire_test_and_clear_bit(nr, vaddr) : \ ++ __generic_coldfire_test_and_clear_bit(nr, vaddr)) ++ ++#if 0 ++static __inline__ int __constant_coldfire_test_and_clear_bit(int nr, ++ volatile void *vaddr) ++{ ++ char retval; ++ volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3]; ++ ++ __asm__ __volatile__ ("bclr %2,%1; sne %0" ++ : "=d" (retval), "+QUd" (*p) ++ : "id" (nr & 7)); ++ ++ return retval; ++} ++#else ++static __inline__ int __constant_coldfire_test_and_clear_bit(int nr, ++ volatile void *vaddr) ++{ ++ char retval; ++ volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3]; ++ ++ __asm__ __volatile__ ("bclr %2,(%4); sne %0" ++ : "=d" (retval), "=m" (*p) ++ : "id" (nr & 7), "m" (*p), "a" (p)); ++ ++ return retval; ++} ++#endif ++ ++static __inline__ int __generic_coldfire_test_and_clear_bit(int nr, ++ volatile void *vaddr) ++{ ++ char retval; ++ ++ __asm__ __volatile__ ("bclr %2,%1; sne %0" ++ : "=d" (retval), "=m" (((volatile char *)vaddr)[(nr^31) >> 3]) ++ : "d" (nr & 7) ++ : "memory"); ++ ++ return retval; ++} ++#define __test_and_clear_bit(nr, vaddr) test_and_clear_bit(nr, vaddr) ++ ++/* ++ * clear_bit() doesn't provide any barrier for the compiler. ++ */ ++#define smp_mb__before_clear_bit() barrier() ++#define smp_mb__after_clear_bit() barrier() ++ ++#define clear_bit(nr,vaddr) \ ++ (__builtin_constant_p(nr) ? \ ++ __constant_coldfire_clear_bit(nr, vaddr) : \ ++ __generic_coldfire_clear_bit(nr, vaddr)) ++ ++#if 0 ++static __inline__ void __constant_coldfire_clear_bit(int nr, ++ volatile void *vaddr) ++{ ++ volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3]; ++ __asm__ __volatile__ ("bclr %1,%0" ++ : "+QUd" (*p) : "id" (nr & 7)); ++} ++#else ++static __inline__ void __constant_coldfire_clear_bit(int nr, ++ volatile void *vaddr) ++{ ++ volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3]; ++ __asm__ __volatile__ ("bclr %1,(%3)" ++ : "=m" (*p) : "id" (nr & 7), "m" (*p), "a" (p)); ++} ++#endif ++ ++static __inline__ void __generic_coldfire_clear_bit(int nr, ++ volatile void *vaddr) ++{ ++ __asm__ __volatile__ ("bclr %1,%0" ++ : "=m" (((volatile char *)vaddr)[(nr^31) >> 3]) ++ : "d" (nr) ++ : "memory"); ++} ++#define __clear_bit(nr, vaddr) clear_bit(nr, vaddr) ++ ++#define test_and_change_bit(nr, vaddr) \ ++ (__builtin_constant_p(nr) ? \ ++ __constant_coldfire_test_and_change_bit(nr, vaddr) : \ ++ __generic_coldfire_test_and_change_bit(nr, vaddr)) ++ ++#if 0 ++static __inline__ int __constant_coldfire_test_and_change_bit(int nr, ++ volatile void *vaddr) ++{ ++ char retval; ++ volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3]; ++ ++ __asm__ __volatile__ ("bchg %2,%1; sne %0" ++ : "=d" (retval), "+QUd" (*p) ++ : "id" (nr & 7)); ++ ++ return retval; ++} ++#else ++static __inline__ int __constant_coldfire_test_and_change_bit(int nr, ++ volatile void *vaddr) ++{ ++ char retval; ++ volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3]; ++ ++ __asm__ __volatile__ ("bchg %2,(%4); sne %0" ++ : "=d" (retval), "=m" (*p) ++ : "id" (nr & 7), "m" (*p), "a" (p)); ++ ++ return retval; ++} ++#endif ++ ++static __inline__ int __generic_coldfire_test_and_change_bit(int nr, ++ volatile void *vaddr) ++{ ++ char retval; ++ ++ __asm__ __volatile__ ("bchg %2,%1; sne %0" ++ : "=d" (retval), "=m" (((volatile char *)vaddr)[(nr^31) >> 3]) ++ : "id" (nr) ++ : "memory"); ++ ++ return retval; ++} ++#define __test_and_change_bit(nr, vaddr) test_and_change_bit(nr, vaddr) ++#define __change_bit(nr, vaddr) change_bit(nr, vaddr) ++ ++#define change_bit(nr,vaddr) \ ++ (__builtin_constant_p(nr) ? \ ++ __constant_coldfire_change_bit(nr, vaddr) : \ ++ __generic_coldfire_change_bit(nr, vaddr)) ++ ++#if 0 ++static __inline__ void __constant_coldfire_change_bit(int nr, ++ volatile void *vaddr) ++{ ++ volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3]; ++ __asm__ __volatile__ ("bchg %1,%0" ++ : "+QUd" (*p) : "id" (nr & 7)); ++} ++#else ++static __inline__ void __constant_coldfire_change_bit(int nr, ++ volatile void *vaddr) ++{ ++ volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3]; ++ __asm__ __volatile__ ("bchg %1,(%3)" ++ : "=m" (*p) : "id" (nr & 7), "m" (*p), "a" (p)); ++} ++#endif ++ ++static __inline__ void __generic_coldfire_change_bit(int nr, ++ volatile void *vaddr) ++{ ++ __asm__ __volatile__ ("bchg %1,%0" ++ : "=m" (((volatile char *)vaddr)[(nr^31) >> 3]) ++ : "d" (nr) ++ : "memory"); ++} ++ ++static inline int test_bit(int nr, const unsigned long *vaddr) ++{ ++ return (vaddr[nr >> 5] & (1UL << (nr & 31))) != 0; ++} ++ ++static __inline__ unsigned long ffz(unsigned long word) ++{ ++ unsigned long result = 0; ++ ++ while (word & 1) { ++ result++; ++ word >>= 1; ++ } ++ return result; ++} ++ ++/* find_next_zero_bit() finds the first zero bit in a bit string of length ++ * 'size' bits, starting the search at bit 'offset'. This is largely based ++ * on Linus's ALPHA routines. ++ */ ++static __inline__ unsigned long find_next_zero_bit(void *addr, ++ unsigned long size, unsigned long offset) ++{ ++ unsigned long *p = ((unsigned long *) addr) + (offset >> 5); ++ unsigned long result = offset & ~31UL; ++ unsigned long tmp; ++ ++ if (offset >= size) ++ return size; ++ size -= result; ++ offset &= 31UL; ++ if (offset) { ++ tmp = *(p++); ++ tmp |= ~0UL >> (32-offset); ++ if (size < 32) ++ goto found_first; ++ if (~tmp) ++ goto found_middle; ++ size -= 32; ++ result += 32; ++ } ++ while (size & ~31UL) { ++ tmp = *(p++); ++ if (~tmp) ++ goto found_middle; ++ result += 32; ++ size -= 32; ++ } ++ if (!size) ++ return result; ++ tmp = *p; ++ ++found_first: ++ tmp |= ~0UL >> size; ++found_middle: ++ return result + ffz(tmp); ++} ++ ++#define find_first_zero_bit(addr, size) find_next_zero_bit(((void *)addr), \ ++ (size), 0) ++ ++/* Ported from included/linux/bitops.h */ ++static __inline__ int ffs(int x) ++{ ++ int r = 1; ++ ++ if (!x) ++ return 0; ++ if (!(x & 0xffff)) { ++ x >>= 16; ++ r += 16; ++ } ++ if (!(x & 0xff)) { ++ x >>= 8; ++ r += 8; ++ } ++ if (!(x & 0xf)) { ++ x >>= 4; ++ r += 4; ++ } ++ if (!(x & 3)) { ++ x >>= 2; ++ r += 2; ++ } ++ if (!(x & 1)) { ++ x >>= 1; ++ r += 1; ++ } ++ return r; ++} ++#define __ffs(x) (ffs(x) - 1) ++ ++/* find_next_bit - find the next set bit in a memory region ++ * (from asm-ppc/bitops.h) ++ */ ++static __inline__ unsigned long find_next_bit(const unsigned long *addr, ++ unsigned long size, unsigned long offset) ++{ ++ unsigned int *p = ((unsigned int *) addr) + (offset >> 5); ++ unsigned int result = offset & ~31UL; ++ unsigned int tmp; ++ ++ if (offset >= size) ++ return size; ++ size -= result; ++ offset &= 31UL; ++ if (offset) { ++ tmp = *p++; ++ tmp &= ~0UL << offset; ++ if (size < 32) ++ goto found_first; ++ if (tmp) ++ goto found_middle; ++ size -= 32; ++ result += 32; ++ } ++ while (size >= 32) { ++ tmp = *p++; ++ if (tmp != 0) ++ goto found_middle; ++ result += 32; ++ size -= 32; ++ } ++ if (!size) ++ return result; ++ tmp = *p; ++ ++found_first: ++ tmp &= ~0UL >> (32 - size); ++ if (tmp == 0UL) /* Are any bits set? */ ++ return result + size; /* Nope. */ ++found_middle: ++ return result + __ffs(tmp); ++} ++ ++#define find_first_bit(addr, size) find_next_bit((addr), (size), 0) ++ ++#ifdef __KERNEL__ ++ ++/* Ported from include/linux/bitops.h */ ++static __inline__ int fls(int x) ++{ ++ int r = 32; ++ ++ if (!x) ++ return 0; ++ if (!(x & 0xffff0000u)) { ++ x <<= 16; ++ r -= 16; ++ } ++ if (!(x & 0xff000000u)) { ++ x <<= 8; ++ r -= 8; ++ } ++ if (!(x & 0xf0000000u)) { ++ x <<= 4; ++ r -= 4; ++ } ++ if (!(x & 0xc0000000u)) { ++ x <<= 2; ++ r -= 2; ++ } ++ if (!(x & 0x80000000u)) { ++ x <<= 1; ++ r -= 1; ++ } ++ return r; ++} ++ ++#include <asm-generic/bitops/fls64.h> ++#include <asm-generic/bitops/sched.h> ++#include <asm-generic/bitops/hweight.h> ++#include <asm-generic/bitops/lock.h> ++ ++#define minix_find_first_zero_bit(addr, size) find_next_zero_bit((addr), \ ++ (size), 0) ++#define minix_test_and_set_bit(nr, addr) test_and_set_bit((nr), \ ++ (unsigned long *)(addr)) ++#define minix_set_bit(nr, addr) set_bit((nr), \ ++ (unsigned long *)(addr)) ++#define minix_test_and_clear_bit(nr, addr) test_and_clear_bit((nr), \ ++ (unsigned long *)(addr)) ++ ++static inline int minix_test_bit(int nr, const volatile unsigned long *vaddr) ++{ ++ int *a = (int *)vaddr; ++ int mask; ++ ++ a += nr >> 5; ++ mask = 1 << (nr & 0x1f); ++ return ((mask & *a) != 0); ++} ++ ++#define ext2_set_bit(nr, addr) test_and_set_bit((nr) ^ 24, \ ++ (unsigned long *)(addr)) ++#define ext2_set_bit_atomic(lock, nr, addr) test_and_set_bit((nr) ^ 24, \ ++ (unsigned long *)(addr)) ++#define ext2_clear_bit(nr, addr) test_and_clear_bit((nr) ^ 24, \ ++ (unsigned long *)(addr)) ++#define ext2_clear_bit_atomic(lock, nr, addr) test_and_clear_bit((nr) ^ 24, \ ++ (unsigned long *)(addr)) ++ ++static inline int ext2_test_bit(int nr, const void *vaddr) ++{ ++ const unsigned char *p = vaddr; ++ return (p[nr >> 3] & (1U << (nr & 7))) != 0; ++} ++ ++static inline int ext2_find_first_zero_bit(const void *vaddr, unsigned size) ++{ ++ const unsigned long *p = vaddr, *addr = vaddr; ++ int res; ++ ++ if (!size) ++ return 0; ++ ++ size = (size >> 5) + ((size & 31) > 0); ++ while (*p++ == ~0UL) { ++ if (--size == 0) ++ return (p - addr) << 5; ++ } ++ ++ --p; ++ for (res = 0; res < 32; res++) ++ if (!ext2_test_bit (res, p)) ++ break; ++ return (p - addr) * 32 + res; ++} ++ ++static inline int ext2_find_next_zero_bit(const void *vaddr, unsigned size, ++ unsigned offset) ++{ ++ const unsigned long *addr = vaddr; ++ const unsigned long *p = addr + (offset >> 5); ++ int bit = offset & 31UL, res; ++ ++ if (offset >= size) ++ return size; ++ ++ if (bit) { ++ /* Look for zero in first longword */ ++ for (res = bit; res < 32; res++) ++ if (!ext2_test_bit (res, p)) ++ return (p - addr) * 32 + res; ++ p++; ++ } ++ /* No zero yet, search remaining full bytes for a zero */ ++ res = ext2_find_first_zero_bit(p, size - 32 * (p - addr)); ++ return (p - addr) * 32 + res; ++} ++ ++#endif /* KERNEL */ ++ ++#endif /* CONFIG_COLDFIRE */ ++ + #endif /* _M68K_BITOPS_H */ +--- a/include/asm-m68k/bootinfo.h ++++ b/include/asm-m68k/bootinfo.h +@@ -19,11 +19,59 @@ + ** Redesign of the boot information structure; renamed to bootinfo.h again + ** 27/11/96 Geert Uytterhoeven: + ** Backwards compatibility with bootinfo interface version 1.0 ++** 12/03/08 Kurt Mahan ++** Copy the bd_info structure from uboot1.3.2/include/asm-m68k/u-boot.h ++** into this file. The original author is Wolfgang Denk, ++** DENX Software Engineering, wd@denx.de. + */ + + #ifndef _M68K_BOOTINFO_H + #define _M68K_BOOTINFO_H + ++#ifndef __ASSEMBLY__ ++/* ++ * UBoot Support ++ * ++ * bd_info structure from uboot1.3.2/include/asm-m68k/u-boot.h ++ */ ++struct bd_info { ++ unsigned long bi_memstart; /* start of DRAM memory */ ++ unsigned long bi_memsize; /* size of DRAM memory in bytes */ ++ unsigned long bi_flashstart; /* start of FLASH memory */ ++ unsigned long bi_flashsize; /* size of FLASH memory */ ++ unsigned long bi_flashoffset; /* reserved area for startup monitor */ ++ unsigned long bi_sramstart; /* start of SRAM memory */ ++ unsigned long bi_sramsize; /* size of SRAM memory */ ++ unsigned long bi_mbar_base; /* base of internal registers */ ++ unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */ ++ unsigned long bi_boot_params; /* where this board expects params */ ++ unsigned long bi_ip_addr; /* IP Address */ ++ unsigned char bi_enet0addr[6]; /* Ethernet 0 mac address */ ++ unsigned short bi_ethspeed; /* Ethernet speed in Mbps */ ++ unsigned long bi_intfreq; /* Internal Freq, in MHz */ ++ unsigned long bi_busfreq; /* Bus Freq, in MHz */ ++#ifdef UBOOT_PCI ++ unsigned long bi_pcifreq; /* pci Freq in MHz */ ++#endif ++#ifdef UBOOT_EXTRA_CLOCK ++ unsigned long bi_inpfreq; /* input Freq in MHz */ ++ unsigned long bi_vcofreq; /* vco Freq in MHz */ ++ unsigned long bi_flbfreq; /* Flexbus Freq in MHz */ ++#endif ++ unsigned long bi_baudrate; /* Console Baudrate */ ++ unsigned char bi_enet1addr[6]; /* eth1 mac address */ ++ unsigned char bi_enet2addr[6]; /* eth2 mac address */ ++ unsigned char bi_enet3addr[6]; /* eth3 mac address */ ++}; ++ ++struct uboot_record { ++ struct bd_info *bdi; ++ unsigned long initrd_start; ++ unsigned long initrd_end; ++ unsigned long cmd_line_start; ++ unsigned long cmd_line_stop; ++}; ++#endif /* __ASSEMBLY__ */ + + /* + * Bootinfo definitions +@@ -49,6 +97,8 @@ struct bi_record { + #endif /* __ASSEMBLY__ */ + + ++ ++ + /* + * Tag Definitions + * +--- a/include/asm-m68k/byteorder.h ++++ b/include/asm-m68k/byteorder.h +@@ -4,8 +4,15 @@ + #include <asm/types.h> + #include <linux/compiler.h> + +-#ifdef __GNUC__ +- ++#if defined(__GNUC__) ++#if defined(__mcfisaaplus__) || defined(__mcfisac__) ++static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 val) ++{ ++ __asm__ ("byterev %0" : "=d" (val) : "0" (val)); ++ return val; ++} ++#define __arch__swab32(x) ___arch__swab32(x) ++#elif !defined(__mcoldfire__) + static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 val) + { + __asm__("rolw #8,%0; swap %0; rolw #8,%0" : "=d" (val) : "0" (val)); +@@ -14,6 +21,7 @@ static __inline__ __attribute_const__ __ + #define __arch__swab32(x) ___arch__swab32(x) + + #endif ++#endif + + #if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__) + # define __BYTEORDER_HAS_U64__ +--- a/include/asm-m68k/cacheflush.h ++++ b/include/asm-m68k/cacheflush.h +@@ -6,6 +6,9 @@ + /* cache code */ + #define FLUSH_I_AND_D (0x00000808) + #define FLUSH_I (0x00000008) ++#ifdef CONFIG_COLDFIRE ++#include <asm/cf_cacheflush.h> ++#else /* !CONFIG_COLDFIRE */ + + /* + * Cache handling functions +@@ -153,4 +156,5 @@ static inline void copy_from_user_page(s + memcpy(dst, src, len); + } + ++#endif /* !CONFIG_COLDFIRE */ + #endif /* _M68K_CACHEFLUSH_H */ +--- /dev/null ++++ b/include/asm-m68k/cf_5445x_cacheflush.h +@@ -0,0 +1,447 @@ ++/* ++ * include/asm-m68k/cf_5445x_cacheflush.h - Coldfire 5445x Cache ++ * ++ * Based on include/asm-m68k/cacheflush.h ++ * ++ * Coldfire pieces by: ++ * Kurt Mahan kmahan@freescale.com ++ * ++ * Copyright Freescale Semiconductor, Inc. 2007, 2008 ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ */ ++#ifndef M68K_CF_5445x_CACHEFLUSH_H ++#define M68K_CF_5445x_CACHEFLUSH_H ++ ++#include <asm/cfcache.h> ++ ++/* ++ * Coldfire Cache Model ++ * ++ * The Coldfire processors use a Harvard architecture cache configured ++ * as four-way set associative. The cache does not implement bus snooping ++ * so cache coherency with other masters must be maintained in software. ++ * ++ * The cache is managed via the CPUSHL instruction in conjunction with ++ * bits set in the CACR (cache control register). Currently the code ++ * uses the CPUSHL enhancement which adds the ability to ++ * invalidate/clear/push a cacheline by physical address. This feature ++ * is designated in the Hardware Configuration Register [D1-CPES]. ++ * ++ * CACR Bits: ++ * DPI[28] cpushl invalidate disable for d-cache ++ * IDPI[12] cpushl invalidate disable for i-cache ++ * SPA[14] cpushl search by physical address ++ * IVO[20] cpushl invalidate only ++ * ++ * Random Terminology: ++ * * invalidate = reset the cache line's valid bit ++ * * push = generate a line-sized store of the data if its contents are marked ++ * as modifed (the modified flag is cleared after the store) ++ * * clear = push + invalidate ++ */ ++ ++/** ++ * flush_icache - Flush all of the instruction cache ++ */ ++static inline void flush_icache(void) ++{ ++ asm volatile("nop\n" ++ "moveq%.l #0,%%d0\n" ++ "moveq%.l #0,%%d1\n" ++ "move%.l %%d0,%%a0\n" ++ "1:\n" ++ "cpushl %%ic,(%%a0)\n" ++ "add%.l #0x0010,%%a0\n" ++ "addq%.l #1,%%d1\n" ++ "cmpi%.l %0,%%d1\n" ++ "bne 1b\n" ++ "moveq%.l #0,%%d1\n" ++ "addq%.l #1,%%d0\n" ++ "move%.l %%d0,%%a0\n" ++ "cmpi%.l #4,%%d0\n" ++ "bne 1b\n" ++ : : "i" (CACHE_SETS) ++ : "a0", "d0", "d1"); ++} ++ ++/** ++ * flush_dcache - Flush all of the data cache ++ */ ++static inline void flush_dcache(void) ++{ ++ asm volatile("nop\n" ++ "moveq%.l #0,%%d0\n" ++ "moveq%.l #0,%%d1\n" ++ "move%.l %%d0,%%a0\n" ++ "1:\n" ++ "cpushl %%dc,(%%a0)\n" ++ "add%.l #0x0010,%%a0\n" ++ "addq%.l #1,%%d1\n" ++ "cmpi%.l %0,%%d1\n" ++ "bne 1b\n" ++ "moveq%.l #0,%%d1\n" ++ "addq%.l #1,%%d0\n" ++ "move%.l %%d0,%%a0\n" ++ "cmpi%.l #4,%%d0\n" ++ "bne 1b\n" ++ : : "i" (CACHE_SETS) ++ : "a0", "d0", "d1"); ++} ++ ++/** ++ * flush_bcache - Flush all of both caches ++ */ ++static inline void flush_bcache(void) ++{ ++ asm volatile("nop\n" ++ "moveq%.l #0,%%d0\n" ++ "moveq%.l #0,%%d1\n" ++ "move%.l %%d0,%%a0\n" ++ "1:\n" ++ "cpushl %%bc,(%%a0)\n" ++ "add%.l #0x0010,%%a0\n" ++ "addq%.l #1,%%d1\n" ++ "cmpi%.l %0,%%d1\n" ++ "bne 1b\n" ++ "moveq%.l #0,%%d1\n" ++ "addq%.l #1,%%d0\n" ++ "move%.l %%d0,%%a0\n" ++ "cmpi%.l #4,%%d0\n" ++ "bne 1b\n" ++ : : "i" (CACHE_SETS) ++ : "a0", "d0", "d1"); ++} ++ ++/** ++ * cf_cache_clear - invalidate cache ++ * @paddr: starting physical address ++ * @len: number of bytes ++ * ++ * Invalidate cache lines starting at paddr for len bytes. ++ * Those lines are not pushed. ++ */ ++static inline void cf_cache_clear(unsigned long paddr, int len) ++{ ++ /* number of lines */ ++ len = (len + (CACHE_LINE_SIZE-1)) / CACHE_LINE_SIZE; ++ if (len == 0) ++ return; ++ ++ /* align on set boundary */ ++ paddr &= 0xfffffff0; ++ ++ asm volatile("nop\n" ++ "move%.l %2,%%d0\n" ++ "or%.l %3,%%d0\n" ++ "movec %%d0,%%cacr\n" ++ "move%.l %0,%%a0\n" ++ "move%.l %1,%%d0\n" ++ "1:\n" ++ "cpushl %%bc,(%%a0)\n" ++ "lea 0x10(%%a0),%%a0\n" ++ "subq%.l #1,%%d0\n" ++ "bne%.b 1b\n" ++ "movec %2,%%cacr\n" ++ : : "a" (paddr), "r" (len), ++ "r" (shadow_cacr), ++ "i" (CF_CACR_SPA+CF_CACR_IVO) ++ : "a0", "d0"); ++} ++ ++/** ++ * cf_cache_push - Push dirty cache out with no invalidate ++ * @paddr: starting physical address ++ * @len: number of bytes ++ * ++ * Push the any dirty lines starting at paddr for len bytes. ++ * Those lines are not invalidated. ++ */ ++static inline void cf_cache_push(unsigned long paddr, int len) ++{ ++ /* number of lines */ ++ len = (len + (CACHE_LINE_SIZE-1)) / CACHE_LINE_SIZE; ++ if (len == 0) ++ return; ++ ++ /* align on set boundary */ ++ paddr &= 0xfffffff0; ++ ++ asm volatile("nop\n" ++ "move%.l %2,%%d0\n" ++ "or%.l %3,%%d0\n" ++ "movec %%d0,%%cacr\n" ++ "move%.l %0,%%a0\n" ++ "move%.l %1,%%d0\n" ++ "1:\n" ++ "cpushl %%bc,(%%a0)\n" ++ "lea 0x10(%%a0),%%a0\n" ++ "subq%.l #1,%%d0\n" ++ "bne.b 1b\n" ++ "movec %2,%%cacr\n" ++ : : "a" (paddr), "r" (len), ++ "r" (shadow_cacr), ++ "i" (CF_CACR_SPA+CF_CACR_DPI+CF_CACR_IDPI) ++ : "a0", "d0"); ++} ++ ++/** ++ * cf_cache_flush - Push dirty cache out and invalidate ++ * @paddr: starting physical address ++ * @len: number of bytes ++ * ++ * Push the any dirty lines starting at paddr for len bytes and ++ * invalidate those lines. ++ */ ++static inline void cf_cache_flush(unsigned long paddr, int len) ++{ ++ /* number of lines */ ++ len = (len + (CACHE_LINE_SIZE-1)) / CACHE_LINE_SIZE; ++ if (len == 0) ++ return; ++ ++ /* align on set boundary */ ++ paddr &= 0xfffffff0; ++ ++ asm volatile("nop\n" ++ "move%.l %2,%%d0\n" ++ "or%.l %3,%%d0\n" ++ "movec %%d0,%%cacr\n" ++ "move%.l %0,%%a0\n" ++ "move%.l %1,%%d0\n" ++ "1:\n" ++ "cpushl %%bc,(%%a0)\n" ++ "lea 0x10(%%a0),%%a0\n" ++ "subq%.l #1,%%d0\n" ++ "bne.b 1b\n" ++ "movec %2,%%cacr\n" ++ : : "a" (paddr), "r" (len), ++ "r" (shadow_cacr), ++ "i" (CF_CACR_SPA) ++ : "a0", "d0"); ++} ++ ++/** ++ * cf_cache_flush_range - Push dirty data/inst cache in range out and invalidate ++ * @vstart - starting virtual address ++ * @vend: ending virtual address ++ * ++ * Push the any dirty data/instr lines starting at paddr for len bytes and ++ * invalidate those lines. ++ */ ++static inline void cf_cache_flush_range(unsigned long vstart, unsigned long vend) ++{ ++ int len; ++ ++ /* align on set boundary */ ++ vstart &= 0xfffffff0; ++ vend = PAGE_ALIGN((vend + (CACHE_LINE_SIZE-1))) & 0xfffffff0; ++ len = vend - vstart; ++ if (len == 0) ++ return; ++ vstart = __pa(vstart); ++ vend = vstart + len; ++ ++ asm volatile("nop\n" ++ "move%.l %2,%%d0\n" ++ "or%.l %3,%%d0\n" ++ "movec %%d0,%%cacr\n" ++ "move%.l %0,%%a0\n" ++ "move%.l %1,%%a1\n" ++ "1:\n" ++ "cpushl %%bc,(%%a0)\n" ++ "lea 0x10(%%a0),%%a0\n" ++ "cmpa%.l %%a0,%%a1\n" ++ "bne.b 1b\n" ++ "movec %2,%%cacr\n" ++ : /* no return */ ++ : "a" (vstart), "a" (vend), ++ "r" (shadow_cacr), ++ "i" (CF_CACR_SPA) ++ : "a0", "a1", "d0"); ++} ++ ++/** ++ * cf_dcache_flush_range - Push dirty data cache in range out and invalidate ++ * @vstart - starting virtual address ++ * @vend: ending virtual address ++ * ++ * Push the any dirty data lines starting at paddr for len bytes and ++ * invalidate those lines. ++ */ ++static inline void cf_dcache_flush_range(unsigned long vstart, unsigned long vend) ++{ ++ /* align on set boundary */ ++ vstart &= 0xfffffff0; ++ vend = (vend + (CACHE_LINE_SIZE-1)) & 0xfffffff0; ++ ++ asm volatile("nop\n" ++ "move%.l %2,%%d0\n" ++ "or%.l %3,%%d0\n" ++ "movec %%d0,%%cacr\n" ++ "move%.l %0,%%a0\n" ++ "move%.l %1,%%a1\n" ++ "1:\n" ++ "cpushl %%dc,(%%a0)\n" ++ "lea 0x10(%%a0),%%a0\n" ++ "cmpa%.l %%a0,%%a1\n" ++ "bne.b 1b\n" ++ "movec %2,%%cacr\n" ++ : /* no return */ ++ : "a" (__pa(vstart)), "a" (__pa(vend)), ++ "r" (shadow_cacr), ++ "i" (CF_CACR_SPA) ++ : "a0", "a1", "d0"); ++} ++ ++/** ++ * cf_icache_flush_range - Push dirty inst cache in range out and invalidate ++ * @vstart - starting virtual address ++ * @vend: ending virtual address ++ * ++ * Push the any dirty instr lines starting at paddr for len bytes and ++ * invalidate those lines. This should just be an invalidate since you ++ * shouldn't be able to have dirty instruction cache. ++ */ ++static inline void cf_icache_flush_range(unsigned long vstart, unsigned long vend) ++{ ++ /* align on set boundary */ ++ vstart &= 0xfffffff0; ++ vend = (vend + (CACHE_LINE_SIZE-1)) & 0xfffffff0; ++ ++ asm volatile("nop\n" ++ "move%.l %2,%%d0\n" ++ "or%.l %3,%%d0\n" ++ "movec %%d0,%%cacr\n" ++ "move%.l %0,%%a0\n" ++ "move%.l %1,%%a1\n" ++ "1:\n" ++ "cpushl %%ic,(%%a0)\n" ++ "lea 0x10(%%a0),%%a0\n" ++ "cmpa%.l %%a0,%%a1\n" ++ "bne.b 1b\n" ++ "movec %2,%%cacr\n" ++ : /* no return */ ++ : "a" (__pa(vstart)), "a" (__pa(vend)), ++ "r" (shadow_cacr), ++ "i" (CF_CACR_SPA) ++ : "a0", "a1", "d0"); ++} ++ ++/** ++ * flush_cache_mm - Flush an mm_struct ++ * @mm: mm_struct to flush ++ */ ++static inline void flush_cache_mm(struct mm_struct *mm) ++{ ++ if (mm == current->mm) ++ flush_bcache(); ++} ++ ++#define flush_cache_dup_mm(mm) flush_cache_mm(mm) ++ ++/** ++ * flush_cache_range - Flush a cache range ++ * @vma: vma struct ++ * @start: Starting address ++ * @end: Ending address ++ * ++ * flush_cache_range must be a macro to avoid a dependency on ++ * linux/mm.h which includes this file. ++ */ ++static inline void flush_cache_range(struct vm_area_struct *vma, ++ unsigned long start, unsigned long end) ++{ ++ if (vma->vm_mm == current->mm) ++ cf_cache_flush_range(start, end); ++} ++ ++/** ++ * flush_cache_page - Flush a page of the cache ++ * @vma: vma struct ++ * @vmaddr: ++ * @pfn: page numer ++ * ++ * flush_cache_page must be a macro to avoid a dependency on ++ * linux/mm.h which includes this file. ++ */ ++static inline void flush_cache_page(struct vm_area_struct *vma, ++ unsigned long vmaddr, unsigned long pfn) ++{ ++ if (vma->vm_mm == current->mm) ++ cf_cache_flush_range(vmaddr, vmaddr+PAGE_SIZE); ++} ++ ++/** ++ * __flush_page_to_ram - Push a page out of the cache ++ * @vaddr: Virtual address at start of page ++ * ++ * Push the page at kernel virtual address *vaddr* and clear ++ * the icache. ++ */ ++static inline void __flush_page_to_ram(void *vaddr) ++{ ++ asm volatile("nop\n" ++ "move%.l %2,%%d0\n" ++ "or%.l %3,%%d0\n" ++ "movec %%d0,%%cacr\n" ++ "move%.l %0,%%d0\n" ++ "and%.l #0xfffffff0,%%d0\n" ++ "move%.l %%d0,%%a0\n" ++ "move%.l %1,%%d0\n" ++ "1:\n" ++ "cpushl %%bc,(%%a0)\n" ++ "lea 0x10(%%a0),%%a0\n" ++ "subq%.l #1,%%d0\n" ++ "bne.b 1b\n" ++ "movec %2,%%cacr\n" ++ : : "a" (__pa(vaddr)), "i" (PAGE_SIZE / CACHE_LINE_SIZE), ++ "r" (shadow_cacr), "i" (CF_CACR_SPA) ++ : "a0", "d0"); ++} ++ ++/* ++ * Various defines for the kernel. ++ */ ++ ++extern void cache_clear(unsigned long paddr, int len); ++extern void cache_push(unsigned long paddr, int len); ++extern void flush_icache_range(unsigned long address, unsigned long endaddr); ++ ++#define flush_cache_all() flush_bcache() ++#define flush_cache_vmap(start, end) flush_bcache() ++#define flush_cache_vunmap(start, end) flush_bcache() ++ ++#define flush_dcache_range(vstart, vend) cf_dcache_flush_range(vstart, vend) ++#define flush_dcache_page(page) __flush_page_to_ram(page_address(page)) ++#define flush_dcache_mmap_lock(mapping) do { } while (0) ++#define flush_dcache_mmap_unlock(mapping) do { } while (0) ++ ++#define flush_icache_page(vma, page) __flush_page_to_ram(page_address(page)) ++ ++/** ++ * copy_to_user_page - Copy memory to user page ++ */ ++static inline void copy_to_user_page(struct vm_area_struct *vma, ++ struct page *page, unsigned long vaddr, ++ void *dst, void *src, int len) ++{ ++ memcpy(dst, src, len); ++ cf_cache_flush(page_to_phys(page), PAGE_SIZE); ++} ++ ++/** ++ * copy_from_user_page - Copy memory from user page ++ */ ++static inline void copy_from_user_page(struct vm_area_struct *vma, ++ struct page *page, unsigned long vaddr, ++ void *dst, void *src, int len) ++{ ++ cf_cache_flush(page_to_phys(page), PAGE_SIZE); ++ memcpy(dst, src, len); ++} ++ ++#endif /* M68K_CF_5445x_CACHEFLUSH_H */ +--- /dev/null ++++ b/include/asm-m68k/cf_548x_cacheflush.h +@@ -0,0 +1,259 @@ ++/* ++ * include/asm-m68k/cf_548x_cacheflush.h - Coldfire 547x/548x Cache ++ * ++ * Based on include/asm-m68k/cacheflush.h ++ * ++ * Coldfire pieces by: ++ * Kurt Mahan kmahan@freescale.com ++ * ++ * Copyright Freescale Semiconductor, Inc. 2007, 2008 ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ */ ++#ifndef M68K_CF_548x_CACHEFLUSH_H ++#define M68K_CF_548x_CACHEFLUSH_H ++ ++#include <asm/cfcache.h> ++/* ++ * Cache handling functions ++ */ ++ ++#define flush_icache() \ ++({ \ ++ unsigned long set; \ ++ unsigned long start_set; \ ++ unsigned long end_set; \ ++ \ ++ start_set = 0; \ ++ end_set = (unsigned long)LAST_DCACHE_ADDR; \ ++ \ ++ for (set = start_set; set <= end_set; set += (0x10 - 3)) { \ ++ asm volatile("cpushl %%ic,(%0)\n" \ ++ "\taddq%.l #1,%0\n" \ ++ "\tcpushl %%ic,(%0)\n" \ ++ "\taddq%.l #1,%0\n" \ ++ "\tcpushl %%ic,(%0)\n" \ ++ "\taddq%.l #1,%0\n" \ ++ "\tcpushl %%ic,(%0)" : "=a" (set) : "a" (set)); \ ++ } \ ++}) ++ ++#define flush_dcache() \ ++({ \ ++ unsigned long set; \ ++ unsigned long start_set; \ ++ unsigned long end_set; \ ++ \ ++ start_set = 0; \ ++ end_set = (unsigned long)LAST_DCACHE_ADDR; \ ++ \ ++ for (set = start_set; set <= end_set; set += (0x10 - 3)) { \ ++ asm volatile("cpushl %%dc,(%0)\n" \ ++ "\taddq%.l #1,%0\n" \ ++ "\tcpushl %%dc,(%0)\n" \ ++ "\taddq%.l #1,%0\n" \ ++ "\tcpushl %%dc,(%0)\n" \ ++ "\taddq%.l #1,%0\n" \ ++ "\tcpushl %%dc,(%0)" : "=a" (set) : "a" (set)); \ ++ } \ ++}) ++ ++#define flush_bcache() \ ++({ \ ++ unsigned long set; \ ++ unsigned long start_set; \ ++ unsigned long end_set; \ ++ \ ++ start_set = 0; \ ++ end_set = (unsigned long)LAST_DCACHE_ADDR; \ ++ \ ++ for (set = start_set; set <= end_set; set += (0x10 - 3)) { \ ++ asm volatile("cpushl %%bc,(%0)\n" \ ++ "\taddq%.l #1,%0\n" \ ++ "\tcpushl %%bc,(%0)\n" \ ++ "\taddq%.l #1,%0\n" \ ++ "\tcpushl %%bc,(%0)\n" \ ++ "\taddq%.l #1,%0\n" \ ++ "\tcpushl %%bc,(%0)" : "=a" (set) : "a" (set)); \ ++ } \ ++}) ++ ++/* ++ * invalidate the cache for the specified memory range. ++ * It starts at the physical address specified for ++ * the given number of bytes. ++ */ ++extern void cache_clear(unsigned long paddr, int len); ++/* ++ * push any dirty cache in the specified memory range. ++ * It starts at the physical address specified for ++ * the given number of bytes. ++ */ ++extern void cache_push(unsigned long paddr, int len); ++ ++/* ++ * push and invalidate pages in the specified user virtual ++ * memory range. ++ */ ++extern void cache_push_v(unsigned long vaddr, int len); ++ ++/* This is needed whenever the virtual mapping of the current ++ process changes. */ ++ ++/** ++ * flush_cache_mm - Flush an mm_struct ++ * @mm: mm_struct to flush ++ */ ++static inline void flush_cache_mm(struct mm_struct *mm) ++{ ++ if (mm == current->mm) ++ flush_bcache(); ++} ++ ++#define flush_cache_dup_mm(mm) flush_cache_mm(mm) ++ ++#define flush_cache_all() flush_bcache() ++ ++/** ++ * flush_cache_range - Flush a cache range ++ * @vma: vma struct ++ * @start: Starting address ++ * @end: Ending address ++ * ++ * flush_cache_range must be a macro to avoid a dependency on ++ * linux/mm.h which includes this file. ++ */ ++static inline void flush_cache_range(struct vm_area_struct *vma, ++ unsigned long start, unsigned long end) ++{ ++ if (vma->vm_mm == current->mm) ++ flush_bcache(); ++// cf_cache_flush_range(start, end); ++} ++ ++/** ++ * flush_cache_page - Flush a page of the cache ++ * @vma: vma struct ++ * @vmaddr: ++ * @pfn: page numer ++ * ++ * flush_cache_page must be a macro to avoid a dependency on ++ * linux/mm.h which includes this file. ++ */ ++static inline void flush_cache_page(struct vm_area_struct *vma, ++ unsigned long vmaddr, unsigned long pfn) ++{ ++ if (vma->vm_mm == current->mm) ++ flush_bcache(); ++// cf_cache_flush_range(vmaddr, vmaddr+PAGE_SIZE); ++} ++ ++/* Push the page at kernel virtual address and clear the icache */ ++/* RZ: use cpush %bc instead of cpush %dc, cinv %ic */ ++#define flush_page_to_ram(page) __flush_page_to_ram((void *) page_address(page)) ++extern inline void __flush_page_to_ram(void *address) ++{ ++ unsigned long set; ++ unsigned long start_set; ++ unsigned long end_set; ++ unsigned long addr = (unsigned long) address; ++ ++ addr &= ~(PAGE_SIZE - 1); /* round down to page start address */ ++ ++ start_set = addr & _ICACHE_SET_MASK; ++ end_set = (addr + PAGE_SIZE-1) & _ICACHE_SET_MASK; ++ ++ if (start_set > end_set) { ++ /* from the begining to the lowest address */ ++ for (set = 0; set <= end_set; set += (0x10 - 3)) { ++ asm volatile("cpushl %%bc,(%0)\n" ++ "\taddq%.l #1,%0\n" ++ "\tcpushl %%bc,(%0)\n" ++ "\taddq%.l #1,%0\n" ++ "\tcpushl %%bc,(%0)\n" ++ "\taddq%.l #1,%0\n" ++ "\tcpushl %%bc,(%0)" : "=a" (set) : "a" (set)); ++ } ++ /* next loop will finish the cache ie pass the hole */ ++ end_set = LAST_ICACHE_ADDR; ++ } ++ for (set = start_set; set <= end_set; set += (0x10 - 3)) { ++ asm volatile("cpushl %%bc,(%0)\n" ++ "\taddq%.l #1,%0\n" ++ "\tcpushl %%bc,(%0)\n" ++ "\taddq%.l #1,%0\n" ++ "\tcpushl %%bc,(%0)\n" ++ "\taddq%.l #1,%0\n" ++ "\tcpushl %%bc,(%0)" : "=a" (set) : "a" (set)); ++ } ++} ++ ++/* Use __flush_page_to_ram() for flush_dcache_page all values are same - MW */ ++#define flush_dcache_page(page) \ ++ __flush_page_to_ram((void *) page_address(page)) ++#define flush_icache_page(vma,pg) \ ++ __flush_page_to_ram((void *) page_address(pg)) ++#define flush_icache_user_range(adr,len) do { } while (0) ++/* NL */ ++#define flush_icache_user_page(vma,page,addr,len) do { } while (0) ++ ++/* Push n pages at kernel virtual address and clear the icache */ ++/* RZ: use cpush %bc instead of cpush %dc, cinv %ic */ ++extern inline void flush_icache_range (unsigned long address, ++ unsigned long endaddr) ++{ ++ unsigned long set; ++ unsigned long start_set; ++ unsigned long end_set; ++ ++ start_set = address & _ICACHE_SET_MASK; ++ end_set = endaddr & _ICACHE_SET_MASK; ++ ++ if (start_set > end_set) { ++ /* from the begining to the lowest address */ ++ for (set = 0; set <= end_set; set += (0x10 - 3)) { ++ asm volatile("cpushl %%ic,(%0)\n" ++ "\taddq%.l #1,%0\n" ++ "\tcpushl %%ic,(%0)\n" ++ "\taddq%.l #1,%0\n" ++ "\tcpushl %%ic,(%0)\n" ++ "\taddq%.l #1,%0\n" ++ "\tcpushl %%ic,(%0)" : "=a" (set) : "a" (set)); ++ } ++ /* next loop will finish the cache ie pass the hole */ ++ end_set = LAST_ICACHE_ADDR; ++ } ++ for (set = start_set; set <= end_set; set += (0x10 - 3)) { ++ asm volatile("cpushl %%ic,(%0)\n" ++ "\taddq%.l #1,%0\n" ++ "\tcpushl %%ic,(%0)\n" ++ "\taddq%.l #1,%0\n" ++ "\tcpushl %%ic,(%0)\n" ++ "\taddq%.l #1,%0\n" ++ "\tcpushl %%ic,(%0)" : "=a" (set) : "a" (set)); ++ } ++} ++ ++static inline void copy_to_user_page(struct vm_area_struct *vma, ++ struct page *page, unsigned long vaddr, ++ void *dst, void *src, int len) ++{ ++ memcpy(dst, src, len); ++ flush_icache_user_page(vma, page, vaddr, len); ++} ++static inline void copy_from_user_page(struct vm_area_struct *vma, ++ struct page *page, unsigned long vaddr, ++ void *dst, void *src, int len) ++{ ++ memcpy(dst, src, len); ++} ++ ++#define flush_cache_vmap(start, end) flush_cache_all() ++#define flush_cache_vunmap(start, end) flush_cache_all() ++#define flush_dcache_mmap_lock(mapping) do { } while (0) ++#define flush_dcache_mmap_unlock(mapping) do { } while (0) ++ ++#endif /* M68K_CF_548x_CACHEFLUSH_H */ +--- /dev/null ++++ b/include/asm-m68k/cf_cacheflush.h +@@ -0,0 +1,10 @@ ++#ifndef M68K_CF_CACHEFLUSH_H ++#define M68K_CF_CACHEFLUSH_H ++ ++#ifdef CONFIG_M5445X ++#include "cf_5445x_cacheflush.h" ++#else ++#include "cf_548x_cacheflush.h" ++#endif ++ ++#endif /* M68K_CF_CACHEFLUSH_H */ +--- /dev/null ++++ b/include/asm-m68k/cfcache.h +@@ -0,0 +1,114 @@ ++/* ++ * include/asm-m68k/cfcache.h - Coldfire Cache Controller ++ * ++ * Kurt Mahan kmahan@freescale.com ++ * ++ * Copyright Freescale Semiconductor, Inc. 2007 ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ */ ++#ifndef CF_CFCACHE_H ++#define CF_CFCACHE_H ++ ++/* ++ * CACR Cache Control Register ++ */ ++#define CF_CACR_DEC (0x80000000) /* Data Cache Enable */ ++#define CF_CACR_DW (0x40000000) /* Data default Write-protect */ ++#define CF_CACR_DESB (0x20000000) /* Data Enable Store Buffer */ ++#define CF_CACR_DPI (0x10000000) /* Data Disable CPUSHL Invalidate */ ++#define CF_CACR_DHLCK (0x08000000) /* 1/2 Data Cache Lock Mode */ ++#define CF_CACR_DDCM_00 (0x00000000) /* Cacheable writethrough imprecise */ ++#define CF_CACR_DDCM_01 (0x02000000) /* Cacheable copyback */ ++#define CF_CACR_DDCM_10 (0x04000000) /* Noncacheable precise */ ++#define CF_CACR_DDCM_11 (0x06000000) /* Noncacheable imprecise */ ++#define CF_CACR_DCINVA (0x01000000) /* Data Cache Invalidate All */ ++#define CF_CACR_DDSP (0x00800000) /* Data default supervisor-protect */ ++#define CF_CACR_IVO (0x00100000) /* Invalidate only */ ++#define CF_CACR_BEC (0x00080000) /* Branch Cache Enable */ ++#define CF_CACR_BCINVA (0x00040000) /* Branch Cache Invalidate All */ ++#define CF_CACR_IEC (0x00008000) /* Instruction Cache Enable */ ++#define CF_CACR_SPA (0x00004000) /* Search by Physical Address */ ++#define CF_CACR_DNFB (0x00002000) /* Default cache-inhibited fill buf */ ++#define CF_CACR_IDPI (0x00001000) /* Instr Disable CPUSHL Invalidate */ ++#define CF_CACR_IHLCK (0x00000800) /* 1/2 Instruction Cache Lock Mode */ ++#define CF_CACR_IDCM (0x00000400) /* Noncacheable Instr default mode */ ++#define CF_CACR_ICINVA (0x00000100) /* Instr Cache Invalidate All */ ++#define CF_CACR_IDSP (0x00000080) /* Ins default supervisor-protect */ ++#define CF_CACR_EUSP (0x00000020) /* Switch stacks in user mode */ ++ ++#ifdef CONFIG_M5445X ++/* ++ * M5445x Cache Configuration ++ * - cache line size is 16 bytes ++ * - cache is 4-way set associative ++ * - each cache has 256 sets (64k / 16bytes / 4way) ++ * - I-Cache size is 16KB ++ * - D-Cache size is 16KB ++ */ ++#define ICACHE_SIZE 0x4000 /* instruction - 16k */ ++#define DCACHE_SIZE 0x4000 /* data - 16k */ ++ ++#define CACHE_LINE_SIZE 0x0010 /* 16 bytes */ ++#define CACHE_SETS 0x0100 /* 256 sets */ ++#define CACHE_WAYS 0x0004 /* 4 way */ ++ ++#define CACHE_DISABLE_MODE (CF_CACR_DCINVA+ \ ++ CF_CACR_BCINVA+ \ ++ CF_CACR_ICINVA) ++ ++#ifndef CONFIG_M5445X_DISABLE_CACHE ++#define CACHE_INITIAL_MODE (CF_CACR_DEC+ \ ++ CF_CACR_BEC+ \ ++ CF_CACR_IEC+ \ ++ CF_CACR_DESB+ \ ++ CF_CACR_EUSP) ++#else ++/* cache disabled for testing */ ++#define CACHE_INITIAL_MODE (CF_CACR_EUSP) ++#endif /* CONFIG_M5445X_DISABLE_CACHE */ ++ ++#elif defined(CONFIG_M547X_8X) ++/* ++ * M547x/M548x Cache Configuration ++ * - cache line size is 16 bytes ++ * - cache is 4-way set associative ++ * - each cache has 512 sets (128k / 16bytes / 4way) ++ * - I-Cache size is 32KB ++ * - D-Cache size is 32KB ++ */ ++#define ICACHE_SIZE 0x8000 /* instruction - 32k */ ++#define DCACHE_SIZE 0x8000 /* data - 32k */ ++ ++#define CACHE_LINE_SIZE 0x0010 /* 16 bytes */ ++#define CACHE_SETS 0x0200 /* 512 sets */ ++#define CACHE_WAYS 0x0004 /* 4 way */ ++ ++/* in for the old cpushl caching code */ ++#define _DCACHE_SET_MASK ((DCACHE_SIZE/64-1)<<CACHE_WAYS) ++#define _ICACHE_SET_MASK ((ICACHE_SIZE/64-1)<<CACHE_WAYS) ++#define LAST_DCACHE_ADDR _DCACHE_SET_MASK ++#define LAST_ICACHE_ADDR _ICACHE_SET_MASK ++ ++#define CACHE_DISABLE_MODE (CF_CACR_DCINVA+ \ ++ CF_CACR_BCINVA+ \ ++ CF_CACR_ICINVA) ++ ++#define CACHE_INITIAL_MODE (CF_CACR_DEC+ \ ++ CF_CACR_BEC+ \ ++ CF_CACR_IEC+ \ ++ CF_CACR_DESB+ \ ++ CF_CACR_EUSP) ++#endif /* CONFIG_M547X_8X */ ++ ++#ifndef __ASSEMBLY__ ++ ++extern unsigned long shadow_cacr; ++extern void cacr_set(unsigned long x); ++ ++#endif /* !__ASSEMBLY__ */ ++ ++#endif /* CF_CACHE_H */ +--- /dev/null ++++ b/include/asm-m68k/cf_entry.h +@@ -0,0 +1,146 @@ ++#ifndef __CF_M68K_ENTRY_H ++#define __CF_M68K_ENTRY_H ++ ++#include <asm/setup.h> ++#include <asm/page.h> ++#include <asm/coldfire.h> ++#include <asm/cfmmu.h> ++#include <asm/asm-offsets.h> ++ ++/* ++ * Stack layout in 'ret_from_exception': ++ * ++ * This allows access to the syscall arguments in registers d1-d5 ++ * ++ * 0(sp) - d1 ++ * 4(sp) - d2 ++ * 8(sp) - d3 ++ * C(sp) - d4 ++ * 10(sp) - d5 ++ * 14(sp) - a0 ++ * 18(sp) - a1 ++ * 1C(sp) - a2 ++ * 20(sp) - d0 ++ * 24(sp) - orig_d0 ++ * 28(sp) - stack adjustment ++ * 2C(sp) - sr ++ * 2E(sp) - pc ++ * 32(sp) - format & vector ++ * 36(sp) - MMUSR ++ * 3A(sp) - MMUAR ++ */ ++ ++/* ++ * 97/05/14 Andreas: Register %a2 is now set to the current task throughout ++ * the whole kernel. ++ */ ++ ++/* the following macro is used when enabling interrupts */ ++/* portable version */ ++#define ALLOWINT (~0x700) ++#define MAX_NOINT_IPL 0 ++ ++#ifdef __ASSEMBLY__ ++ ++#define curptr a2 ++ ++LFLUSH_I_AND_D = 0x00000808 ++LSIGTRAP = 5 ++ ++/* process bits for task_struct.ptrace */ ++PT_TRACESYS_OFF = 3 ++PT_TRACESYS_BIT = 1 ++PT_PTRACED_OFF = 3 ++PT_PTRACED_BIT = 0 ++PT_DTRACE_OFF = 3 ++PT_DTRACE_BIT = 2 ++ ++#define SAVE_ALL_INT save_all_int ++#define SAVE_ALL_SYS save_all_sys ++#define RESTORE_ALL restore_all ++/* ++ * This defines the normal kernel pt-regs layout. ++ * ++ * regs a3-a6 and d6-d7 are preserved by C code ++ * the kernel doesn't mess with usp unless it needs to ++ */ ++ ++/* ++ * a -1 in the orig_d0 field signifies ++ * that the stack frame is NOT for syscall ++ */ ++.macro save_all_int ++ movel MMUSR,%sp@- ++ movel MMUAR,%sp@- ++ clrl %sp@- | stk_adj ++ pea -1:w | orig d0 ++ movel %d0,%sp@- | d0 ++ subal #(8*4), %sp ++ moveml %d1-%d5/%a0-%a1/%curptr,%sp@ ++.endm ++ ++.macro save_all_sys ++ movel MMUSR,%sp@- ++ movel MMUAR,%sp@- ++ clrl %sp@- | stk_adj ++ movel %d0,%sp@- | orig d0 ++ movel %d0,%sp@- | d0 ++ subal #(8*4), %sp ++ moveml %d1-%d5/%a0-%a1/%curptr,%sp@ ++.endm ++ ++.macro restore_all ++ moveml %sp@,%a0-%a1/%curptr/%d1-%d5 ++ addal #(8*4), %sp ++ movel %sp@+,%d0 | d0 ++ addql #4,%sp | orig d0 ++ addl %sp@+,%sp | stk_adj ++ addql #8,%sp | MMUAR & MMUSR ++ rte ++.endm ++ ++#define SWITCH_STACK_SIZE (6*4+4) /* includes return address */ ++ ++#define SAVE_SWITCH_STACK save_switch_stack ++#define RESTORE_SWITCH_STACK restore_switch_stack ++#define GET_CURRENT(tmp) get_current tmp ++ ++.macro save_switch_stack ++ subal #(6*4), %sp ++ moveml %a3-%a6/%d6-%d7,%sp@ ++.endm ++ ++.macro restore_switch_stack ++ moveml %sp@,%a3-%a6/%d6-%d7 ++ addal #(6*4), %sp ++.endm ++ ++.macro get_current reg=%d0 ++ movel %sp,\reg ++ andl #-THREAD_SIZE,\reg ++ movel \reg,%curptr ++ movel %curptr@,%curptr ++.endm ++ ++#else /* C source */ ++ ++#define STR(X) STR1(X) ++#define STR1(X) #X ++ ++#define PT_OFF_ORIG_D0 0x24 ++#define PT_OFF_FORMATVEC 0x32 ++#define PT_OFF_SR 0x2C ++#define SAVE_ALL_INT \ ++ "clrl %%sp@-;" /* stk_adj */ \ ++ "pea -1:w;" /* orig d0 = -1 */ \ ++ "movel %%d0,%%sp@-;" /* d0 */ \ ++ "subal #(8*4),%sp" \ ++ "moveml %%d1-%%d5/%%a0-%%a2,%%sp@" ++#define GET_CURRENT(tmp) \ ++ "movel %%sp,"#tmp"\n\t" \ ++ "andw #-"STR(THREAD_SIZE)","#tmp"\n\t" \ ++ "movel "#tmp",%%a2\n\t" ++ ++#endif ++ ++#endif /* __CF_M68K_ENTRY_H */ +--- /dev/null ++++ b/include/asm-m68k/cfmmu.h +@@ -0,0 +1,104 @@ ++/* ++ * Definitions for Coldfire V4e MMU ++ */ ++#include <asm/movs.h> ++ ++#ifndef __CF_MMU_H__ ++#define __CF_MMU_H__ ++ ++ ++#define MMU_BASE 0xE1000000 ++ ++ ++#define MMUCR (MMU_BASE+0x00) ++#define MMUCR_ASMN 1 ++#define MMUCR_ASM (1<<MMUCR_ASMN) ++#define MMUCR_ENN 0 ++#define MMUCR_EN (1<<MMUCR_ENN) ++ ++#define MMUOR REG16(MMU_BASE+0x04+0x02) ++#define MMUOR_AAN 16 ++#define MMUOR_AA (0xffff<<MMUOR_AAN) ++#define MMUOR_STLBN 8 ++#define MMUOR_STLB (1<<MMUOR_STLBN) ++#define MMUOR_CAN 7 ++#define MMUOR_CA (1<<MMUOR_CAN) ++#define MMUOR_CNLN 6 ++#define MMUOR_CNL (1<<MMUOR_CNLN) ++#define MMUOR_CASN 5 ++#define MMUOR_CAS (1<<MMUOR_CASN) ++#define MMUOR_ITLBN 4 ++#define MMUOR_ITLB (1<<MMUOR_ITLBN) ++#define MMUOR_ADRN 3 ++#define MMUOR_ADR (1<<MMUOR_ADRN) ++#define MMUOR_RWN 2 ++#define MMUOR_RW (1<<MMUOR_RWN) ++#define MMUOR_ACCN 1 ++#define MMUOR_ACC (1<<MMUOR_ACCN) ++#define MMUOR_UAAN 0 ++#define MMUOR_UAA (1<<MMUOR_UAAN) ++ ++#define MMUSR REG32(MMU_BASE+0x08) ++#define MMUSR_SPFN 5 ++#define MMUSR_SPF (1<<MMUSR_SPFN) ++#define MMUSR_RFN 4 ++#define MMUSR_RF (1<<MMUSR_RFN) ++#define MMUSR_WFN 3 ++#define MMUSR_WF (1<<MMUSR_WFN) ++#define MMUSR_HITN 1 ++#define MMUSR_HIT (1<<MMUSR_HITN) ++ ++#define MMUAR REG32(MMU_BASE+0x10) ++#define MMUAR_VPN 1 ++#define MMUAR_VP (0xfffffffe) ++#define MMUAR_SN 0 ++#define MMUAR_S (1<<MMUAR_SN) ++ ++#define MMUTR REG32(MMU_BASE+0x14) ++#define MMUTR_VAN 10 ++#define MMUTR_VA (0xfffffc00) ++#define MMUTR_IDN 2 ++#define MMUTR_ID (0xff<<MMUTR_IDN) ++#define MMUTR_SGN 1 ++#define MMUTR_SG (1<<MMUTR_SGN) ++#define MMUTR_VN 0 ++#define MMUTR_V (1<<MMUTR_VN) ++ ++#define MMUDR REG32(MMU_BASE+0x18) ++#define MMUDR_PAN 10 ++#define MMUDR_PA (0xfffffc00) ++#define MMUDR_SZN 8 ++#define MMUDR_SZ_MASK (0x2<<MMUDR_SZN) ++#define MMUDR_SZ1M (0<<MMUDR_SZN) ++#define MMUDR_SZ4K (1<<MMUDR_SZN) ++#define MMUDR_SZ8K (2<<MMUDR_SZN) ++#define MMUDR_SZ16M (3<<MMUDR_SZN) ++#define MMUDR_CMN 6 ++#define MMUDR_INC (2<<MMUDR_CMN) ++#define MMUDR_IC (0<<MMUDR_CMN) ++#define MMUDR_DWT (0<<MMUDR_CMN) ++#define MMUDR_DCB (1<<MMUDR_CMN) ++#define MMUDR_DNCP (2<<MMUDR_CMN) ++#define MMUDR_DNCIP (3<<MMUDR_CMN) ++#define MMUDR_SPN 5 ++#define MMUDR_SP (1<<MMUDR_SPN) ++#define MMUDR_RN 4 ++#define MMUDR_R (1<<MMUDR_RN) ++#define MMUDR_WN 3 ++#define MMUDR_W (1<<MMUDR_WN) ++#define MMUDR_XN 2 ++#define MMUDR_X (1<<MMUDR_XN) ++#define MMUDR_LKN 1 ++#define MMUDR_LK (1<<MMUDR_LKN) ++ ++ ++#ifndef __ASSEMBLY__ ++#define CF_PMEGS_NUM 256 ++#define CF_INVALID_CONTEXT 255 ++#define CF_PAGE_PGNUM_MASK (PAGE_MASK) ++ ++extern int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, ++ int extension_word); ++#endif /* __ASSEMBLY__*/ ++ ++#endif /* !__CF_MMU_H__ */ +--- /dev/null ++++ b/include/asm-m68k/cf_pgalloc.h +@@ -0,0 +1,103 @@ ++#ifndef M68K_CF_PGALLOC_H ++#define M68K_CF_PGALLOC_H ++ ++#include <asm/coldfire.h> ++#include <asm/page.h> ++#include <asm/cf_tlbflush.h> ++#include <asm/cf_cacheflush.h> ++ ++extern inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) ++{ ++ free_page((unsigned long) pte); ++} ++ ++extern const char bad_pmd_string[]; ++ ++extern inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, ++ unsigned long address) ++{ ++ unsigned long page = __get_free_page(GFP_DMA|__GFP_REPEAT); ++ ++ if (!page) ++ return NULL; ++ ++ memset((void *)page, 0, PAGE_SIZE); ++ return (pte_t *) (page); ++} ++ ++extern inline pmd_t *pmd_alloc_kernel(pgd_t *pgd, unsigned long address) ++{ ++ return (pmd_t *) pgd; ++} ++ ++#define pmd_alloc_one_fast(mm, address) ({ BUG(); ((pmd_t *)1); }) ++#define pmd_alloc_one(mm, address) ({ BUG(); ((pmd_t *)2); }) ++ ++#define pte_alloc_one_fast(mm, addr) pte_alloc_one(mm, addr) ++ ++#define pmd_populate(mm, pmd, page) (pmd_val(*pmd) = \ ++ (unsigned long)(page_address(page))) ++ ++#define pmd_populate_kernel(mm, pmd, pte) (pmd_val(*pmd) = (unsigned long)(pte)) ++ ++#define pmd_pgtable(pmd) pmd_page(pmd) ++ ++static inline void __pte_free_tlb(struct mmu_gather *tlb, struct page *page) ++{ ++ __free_page(page); ++} ++ ++#define __pmd_free_tlb(tlb, pmd) do { } while (0) ++ ++static inline struct page *pte_alloc_one(struct mm_struct *mm, ++ unsigned long address) ++{ ++ struct page *page = alloc_pages(GFP_DMA|__GFP_REPEAT, 0); ++ pte_t *pte; ++ ++ if (!page) ++ return NULL; ++ ++ pte = kmap(page); ++ if (pte) { ++ clear_page(pte); ++ __flush_page_to_ram(pte); ++ flush_tlb_kernel_page(pte); ++ nocache_page(pte); ++ } ++ kunmap(pte); ++ ++ return page; ++} ++ ++extern inline void pte_free(struct mm_struct *mm, struct page *page) ++{ ++ __free_page(page); ++} ++ ++/* ++ * In our implementation, each pgd entry contains 1 pmd that is never allocated ++ * or freed. pgd_present is always 1, so this should never be called. -NL ++ */ ++#define pmd_free(mm, pmd) BUG() ++ ++extern inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) ++{ ++ free_page((unsigned long) pgd); ++} ++ ++extern inline pgd_t *pgd_alloc(struct mm_struct *mm) ++{ ++ pgd_t *new_pgd; ++ ++ new_pgd = (pgd_t *)__get_free_page(GFP_DMA | __GFP_NOWARN); ++ if (!new_pgd) ++ return NULL; ++ memcpy(new_pgd, swapper_pg_dir, PAGE_SIZE); ++ memset(new_pgd, 0, PAGE_OFFSET >> PGDIR_SHIFT); ++ return new_pgd; ++} ++ ++#define pgd_populate(mm, pmd, pte) BUG() ++ ++#endif /* M68K_CF_PGALLOC_H */ +--- /dev/null ++++ b/include/asm-m68k/cf_pgtable.h +@@ -0,0 +1,357 @@ ++#ifndef _CF_PGTABLE_H ++#define _CF_PGTABLE_H ++ ++#include <asm/cfmmu.h> ++#include <asm/page.h> ++ ++#ifndef __ASSEMBLY__ ++#include <asm/virtconvert.h> ++#include <linux/linkage.h> ++ ++/* For virtual address to physical address conversion */ ++#define VTOP(addr) __pa(addr) ++#define PTOV(addr) __va(addr) ++ ++ ++#endif /* !__ASSEMBLY__ */ ++ ++/* Page protection values within PTE. */ ++ ++/* MMUDR bits, in proper place. */ ++#define CF_PAGE_LOCKED (0x00000002) ++#define CF_PAGE_EXEC (0x00000004) ++#define CF_PAGE_WRITABLE (0x00000008) ++#define CF_PAGE_READABLE (0x00000010) ++#define CF_PAGE_SYSTEM (0x00000020) ++#define CF_PAGE_COPYBACK (0x00000040) ++#define CF_PAGE_NOCACHE (0x00000080) ++ ++#define CF_CACHEMASK (~0x00000040) ++#define CF_PAGE_MMUDR_MASK (0x000000fe) ++ ++#define _PAGE_NOCACHE030 (CF_PAGE_NOCACHE) ++ ++/* MMUTR bits, need shifting down. */ ++#define CF_PAGE_VALID (0x00000400) ++#define CF_PAGE_SHARED (0x00000800) ++ ++#define CF_PAGE_MMUTR_MASK (0x00000c00) ++#define CF_PAGE_MMUTR_SHIFT (10) ++#define CF_ASID_MMU_SHIFT (2) ++ ++/* Fake bits, not implemented in CF, will get masked out before ++ hitting hardware, and might go away altogether once this port is ++ complete. */ ++#if PAGE_SHIFT < 13 ++#error COLDFIRE Error: Pages must be at least 8k in size ++#endif ++#define CF_PAGE_ACCESSED (0x00001000) ++#define CF_PAGE_FILE (0x00000200) ++#define CF_PAGE_DIRTY (0x00000001) ++ ++#define _PAGE_CACHE040 0x020 /* 68040 cache mode, cachable, copyback */ ++#define _PAGE_NOCACHE_S 0x040 /* 68040 no-cache mode, serialized */ ++#define _PAGE_NOCACHE 0x060 /* 68040 cache mode, non-serialized */ ++#define _PAGE_CACHE040W 0x000 /* 68040 cache mode, cachable, write-through */ ++#define _DESCTYPE_MASK 0x003 ++#define _CACHEMASK040 (~0x060) ++#define _PAGE_GLOBAL040 0x400 /* 68040 global bit, used for kva descs */ ++ ++ ++/* Externally used page protection values. */ ++#define _PAGE_PRESENT (CF_PAGE_VALID) ++#define _PAGE_ACCESSED (CF_PAGE_ACCESSED) ++#define _PAGE_DIRTY (CF_PAGE_DIRTY) ++#define _PAGE_READWRITE (CF_PAGE_WRITABLE \ ++ | CF_PAGE_READABLE \ ++ | CF_PAGE_SYSTEM \ ++ | CF_PAGE_SHARED) ++ ++/* Compound page protection values. */ ++#define PAGE_NONE __pgprot(CF_PAGE_VALID \ ++ | CF_PAGE_ACCESSED) ++ ++#define PAGE_SHARED __pgprot(CF_PAGE_VALID \ ++ | CF_PAGE_ACCESSED \ ++ | CF_PAGE_SHARED) ++ ++#define PAGE_INIT __pgprot(CF_PAGE_VALID \ ++ | CF_PAGE_WRITABLE \ ++ | CF_PAGE_READABLE \ ++ | CF_PAGE_EXEC \ ++ | CF_PAGE_SYSTEM \ ++ | CF_PAGE_SHARED) ++ ++#define PAGE_KERNEL __pgprot(CF_PAGE_VALID \ ++ | CF_PAGE_WRITABLE \ ++ | CF_PAGE_READABLE \ ++ | CF_PAGE_EXEC \ ++ | CF_PAGE_SYSTEM \ ++ | CF_PAGE_SHARED \ ++ | CF_PAGE_ACCESSED) ++ ++#define PAGE_COPY __pgprot(CF_PAGE_VALID \ ++ | CF_PAGE_ACCESSED \ ++ | CF_PAGE_READABLE \ ++ | CF_PAGE_DIRTY) ++/* ++ * Page protections for initialising protection_map. See mm/mmap.c ++ * for use. In general, the bit positions are xwr, and P-items are ++ * private, the S-items are shared. ++ */ ++ ++#define __P000 PAGE_NONE ++#define __P100 __pgprot(CF_PAGE_VALID \ ++ | CF_PAGE_ACCESSED \ ++ | CF_PAGE_EXEC) ++#define __P010 __pgprot(CF_PAGE_VALID \ ++ | CF_PAGE_WRITABLE \ ++ | CF_PAGE_ACCESSED) ++#define __P110 __pgprot(CF_PAGE_VALID \ ++ | CF_PAGE_ACCESSED \ ++ | CF_PAGE_WRITABLE \ ++ | CF_PAGE_EXEC) ++#define __P001 __pgprot(CF_PAGE_VALID \ ++ | CF_PAGE_ACCESSED \ ++ | CF_PAGE_READABLE) ++#define __P101 __pgprot(CF_PAGE_VALID \ ++ | CF_PAGE_ACCESSED \ ++ | CF_PAGE_READABLE \ ++ | CF_PAGE_EXEC) ++#define __P011 __pgprot(CF_PAGE_VALID \ ++ | CF_PAGE_READABLE \ ++ | CF_PAGE_WRITABLE \ ++ | CF_PAGE_ACCESSED) ++#define __P111 __pgprot(CF_PAGE_VALID \ ++ | CF_PAGE_ACCESSED \ ++ | CF_PAGE_WRITABLE \ ++ | CF_PAGE_READABLE \ ++ | CF_PAGE_EXEC) ++ ++#define __S000 PAGE_NONE ++#define __S100 __pgprot(CF_PAGE_VALID \ ++ | CF_PAGE_ACCESSED \ ++ | CF_PAGE_SHARED \ ++ | CF_PAGE_EXEC) ++#define __S010 PAGE_SHARED ++#define __S110 __pgprot(CF_PAGE_VALID \ ++ | CF_PAGE_ACCESSED \ ++ | CF_PAGE_SHARED \ ++ | CF_PAGE_EXEC) ++#define __S001 __pgprot(CF_PAGE_VALID \ ++ | CF_PAGE_ACCESSED \ ++ | CF_PAGE_SHARED \ ++ | CF_PAGE_READABLE) ++#define __S101 __pgprot(CF_PAGE_VALID \ ++ | CF_PAGE_ACCESSED \ ++ | CF_PAGE_SHARED \ ++ | CF_PAGE_READABLE \ ++ | CF_PAGE_EXEC) ++#define __S011 __pgprot(CF_PAGE_VALID \ ++ | CF_PAGE_ACCESSED \ ++ | CF_PAGE_SHARED \ ++ | CF_PAGE_READABLE) ++#define __S111 __pgprot(CF_PAGE_VALID \ ++ | CF_PAGE_ACCESSED \ ++ | CF_PAGE_SHARED \ ++ | CF_PAGE_READABLE \ ++ | CF_PAGE_EXEC) ++ ++#define PTE_MASK PAGE_MASK ++#define CF_PAGE_CHG_MASK (PTE_MASK | CF_PAGE_ACCESSED | CF_PAGE_DIRTY) ++ ++#ifndef __ASSEMBLY__ ++ ++/* ++ * Conversion functions: convert a page and protection to a page entry, ++ * and a page entry and page directory to the page they refer to. ++ */ ++#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) ++ ++extern inline pte_t pte_modify(pte_t pte, pgprot_t newprot) ++{ ++ pte_val(pte) = (pte_val(pte) & CF_PAGE_CHG_MASK) | pgprot_val(newprot); ++ return pte; ++} ++ ++#define pmd_set(pmdp, ptep) do {} while (0) ++ ++extern inline void pgd_set(pgd_t *pgdp, pmd_t *pmdp) ++{ ++ pgd_val(*pgdp) = virt_to_phys(pmdp); ++} ++ ++#define __pte_page(pte) \ ++ ((unsigned long) ((pte_val(pte) & CF_PAGE_PGNUM_MASK) + PAGE_OFFSET)) ++#define __pmd_page(pmd) ((unsigned long) (pmd_val(pmd))) ++ ++extern inline int pte_none(pte_t pte) ++{ ++ return !pte_val(pte); ++} ++extern inline int pte_present(pte_t pte) ++{ ++ return pte_val(pte) & CF_PAGE_VALID; ++} ++extern inline void pte_clear(struct mm_struct *mm, unsigned long addr, ++ pte_t *ptep) ++{ ++ pte_val(*ptep) = 0; ++} ++ ++#define pte_pagenr(pte) ((__pte_page(pte) - PAGE_OFFSET) >> PAGE_SHIFT) ++#define pte_page(pte) virt_to_page(__pte_page(pte)) ++ ++extern inline int pmd_none2(pmd_t *pmd) { return !pmd_val(*pmd); } ++#define pmd_none(pmd) pmd_none2(&(pmd)) ++extern inline int pmd_bad2(pmd_t *pmd) { return 0; } ++#define pmd_bad(pmd) pmd_bad2(&(pmd)) ++#define pmd_present(pmd) (!pmd_none2(&(pmd))) ++extern inline void pmd_clear(pmd_t *pmdp) { pmd_val(*pmdp) = 0; } ++ ++extern inline int pgd_none(pgd_t pgd) { return 0; } ++extern inline int pgd_bad(pgd_t pgd) { return 0; } ++extern inline int pgd_present(pgd_t pgd) { return 1; } ++extern inline void pgd_clear(pgd_t *pgdp) {} ++ ++ ++#define pte_ERROR(e) \ ++ printk(KERN_ERR "%s:%d: bad pte %08lx.\n", \ ++ __FILE__, __LINE__, pte_val(e)) ++#define pmd_ERROR(e) \ ++ printk(KERN_ERR "%s:%d: bad pmd %08lx.\n", \ ++ __FILE__, __LINE__, pmd_val(e)) ++#define pgd_ERROR(e) \ ++ printk(KERN_ERR "%s:%d: bad pgd %08lx.\n", \ ++ __FILE__, __LINE__, pgd_val(e)) ++ ++ ++/* ++ * The following only work if pte_present() is true. ++ * Undefined behaviour if not... ++ * [we have the full set here even if they don't change from m68k] ++ */ ++extern inline int pte_read(pte_t pte) \ ++ { return pte_val(pte) & CF_PAGE_READABLE; } ++extern inline int pte_write(pte_t pte) \ ++ { return pte_val(pte) & CF_PAGE_WRITABLE; } ++extern inline int pte_exec(pte_t pte) \ ++ { return pte_val(pte) & CF_PAGE_EXEC; } ++extern inline int pte_dirty(pte_t pte) \ ++ { return pte_val(pte) & CF_PAGE_DIRTY; } ++extern inline int pte_young(pte_t pte) \ ++ { return pte_val(pte) & CF_PAGE_ACCESSED; } ++extern inline int pte_file(pte_t pte) \ ++ { return pte_val(pte) & CF_PAGE_FILE; } ++ ++extern inline pte_t pte_wrprotect(pte_t pte) \ ++ { pte_val(pte) &= ~CF_PAGE_WRITABLE; return pte; } ++extern inline pte_t pte_rdprotect(pte_t pte) \ ++ { pte_val(pte) &= ~CF_PAGE_READABLE; return pte; } ++extern inline pte_t pte_exprotect(pte_t pte) \ ++ { pte_val(pte) &= ~CF_PAGE_EXEC; return pte; } ++extern inline pte_t pte_mkclean(pte_t pte) \ ++ { pte_val(pte) &= ~CF_PAGE_DIRTY; return pte; } ++extern inline pte_t pte_mkold(pte_t pte) \ ++ { pte_val(pte) &= ~CF_PAGE_ACCESSED; return pte; } ++extern inline pte_t pte_mkwrite(pte_t pte) \ ++ { pte_val(pte) |= CF_PAGE_WRITABLE; return pte; } ++extern inline pte_t pte_mkread(pte_t pte) \ ++ { pte_val(pte) |= CF_PAGE_READABLE; return pte; } ++extern inline pte_t pte_mkexec(pte_t pte) \ ++ { pte_val(pte) |= CF_PAGE_EXEC; return pte; } ++extern inline pte_t pte_mkdirty(pte_t pte) \ ++ { pte_val(pte) |= CF_PAGE_DIRTY; return pte; } ++extern inline pte_t pte_mkyoung(pte_t pte) \ ++ { pte_val(pte) |= CF_PAGE_ACCESSED; return pte; } ++extern inline pte_t pte_mknocache(pte_t pte) \ ++ { pte_val(pte) |= 0x80 | (pte_val(pte) & ~0x40); return pte; } ++extern inline pte_t pte_mkcache(pte_t pte) \ ++ { pte_val(pte) &= ~CF_PAGE_NOCACHE; return pte; } ++ ++#define swapper_pg_dir kernel_pg_dir ++extern pgd_t kernel_pg_dir[PTRS_PER_PGD]; ++ ++/* Find an entry in a pagetable directory. */ ++#define pgd_index(address) ((address) >> PGDIR_SHIFT) ++ ++#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address)) ++ ++/* Find an entry in a kernel pagetable directory. */ ++#define pgd_offset_k(address) pgd_offset(&init_mm, address) ++ ++/* Find an entry in the second-level pagetable. */ ++extern inline pmd_t *pmd_offset(pgd_t *pgd, unsigned long address) ++{ ++ return (pmd_t *) pgd; ++} ++ ++/* Find an entry in the third-level pagetable. */ ++#define __pte_offset(address) ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) ++#define pte_offset_kernel(dir, address) ((pte_t *) __pmd_page(*(dir)) + \ ++ __pte_offset(address)) ++ ++/* Disable caching for page at given kernel virtual address. */ ++static inline void nocache_page(void *vaddr) ++{ ++ pgd_t *dir; ++ pmd_t *pmdp; ++ pte_t *ptep; ++ unsigned long addr = (unsigned long)vaddr; ++ ++ dir = pgd_offset_k(addr); ++ pmdp = pmd_offset(dir, addr); ++ ptep = pte_offset_kernel(pmdp, addr); ++ *ptep = pte_mknocache(*ptep); ++} ++ ++/* Enable caching for page at given kernel virtual address. */ ++static inline void cache_page(void *vaddr) ++{ ++ pgd_t *dir; ++ pmd_t *pmdp; ++ pte_t *ptep; ++ unsigned long addr = (unsigned long)vaddr; ++ ++ dir = pgd_offset_k(addr); ++ pmdp = pmd_offset(dir, addr); ++ ptep = pte_offset_kernel(pmdp, addr); ++ *ptep = pte_mkcache(*ptep); ++} ++ ++#define PTE_FILE_MAX_BITS 21 ++#define PTE_FILE_SHIFT 11 ++ ++static inline unsigned long pte_to_pgoff(pte_t pte) ++{ ++ return pte_val(pte) >> PTE_FILE_SHIFT; ++} ++ ++static inline pte_t pgoff_to_pte(unsigned pgoff) ++{ ++ pte_t pte = __pte((pgoff << PTE_FILE_SHIFT) + CF_PAGE_FILE); ++ return pte; ++} ++ ++/* Encode and de-code a swap entry (must be !pte_none(e) && !pte_present(e)) */ ++#define __swp_entry(type, offset) ((swp_entry_t) { (type) | \ ++ (offset << PTE_FILE_SHIFT) }) ++#define __swp_type(x) ((x).val & 0xFF) ++#define __swp_offset(x) ((x).val >> PTE_FILE_SHIFT) ++#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) ++#define __swp_entry_to_pte(x) (__pte((x).val)) ++ ++#define pmd_page(pmd) (pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT)) ++ ++#define pte_offset_map(pmdp, address) ((pte_t *)__pmd_page(*pmdp) + \ ++ __pte_offset(address)) ++#define pte_offset_map_nested(pmdp, address) pte_offset_map(pmdp, address) ++#define pte_unmap(pte) kunmap(pte) ++#define pte_unmap_nested(pte) kunmap(pte) ++ ++#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) ++#define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT) ++ ++ ++#endif /* !__ASSEMBLY__ */ ++#endif /* !_CF_PGTABLE_H */ +--- /dev/null ++++ b/include/asm-m68k/cf_tlbflush.h +@@ -0,0 +1,59 @@ ++#ifndef M68K_CF_TLBFLUSH_H ++#define M68K_CF_TLBFLUSH_H ++ ++#include <asm/coldfire.h> ++ ++/* Flush all userspace mappings. */ ++static inline void flush_tlb_all(void) ++{ ++ preempt_disable(); ++ *MMUOR = MMUOR_CNL; ++ preempt_enable(); ++} ++ ++/* Clear user TLB entries within the context named in mm */ ++static inline void flush_tlb_mm(struct mm_struct *mm) ++{ ++ preempt_disable(); ++ *MMUOR = MMUOR_CNL; ++ preempt_enable(); ++} ++ ++/* Flush a single TLB page. */ ++static inline void flush_tlb_page(struct vm_area_struct *vma, ++ unsigned long addr) ++{ ++ preempt_disable(); ++ *MMUOR = MMUOR_CNL; ++ preempt_enable(); ++} ++/* Flush a range of pages from TLB. */ ++ ++static inline void flush_tlb_range(struct mm_struct *mm, ++ unsigned long start, unsigned long end) ++{ ++ preempt_disable(); ++ *MMUOR = MMUOR_CNL; ++ preempt_enable(); ++} ++ ++/* Flush kernel page from TLB. */ ++static inline void flush_tlb_kernel_page(void *addr) ++{ ++ preempt_disable(); ++ *MMUOR = MMUOR_CNL; ++ preempt_enable(); ++} ++ ++static inline void flush_tlb_kernel_range(unsigned long start, ++ unsigned long end) ++{ ++ flush_tlb_all(); ++} ++ ++extern inline void flush_tlb_pgtables(struct mm_struct *mm, ++ unsigned long start, unsigned long end) ++{ ++} ++ ++#endif /* M68K_CF_TLBFLUSH_H */ +--- /dev/null ++++ b/include/asm-m68k/cf_uaccess.h +@@ -0,0 +1,376 @@ ++#ifndef __M68K_CF_UACCESS_H ++#define __M68K_CF_UACCESS_H ++ ++/* ++ * User space memory access functions ++ */ ++ ++/* The "moves" command is not available in the CF instruction set. */ ++#include <linux/compiler.h> ++#include <linux/errno.h> ++#include <linux/types.h> ++#include <linux/sched.h> ++#include <asm/segment.h> ++ ++#define VERIFY_READ 0 ++#define VERIFY_WRITE 1 ++ ++/* We let the MMU do all checking */ ++#define access_ok(type, addr, size) 1 ++ ++/* ++ * The exception table consists of pairs of addresses: the first is the ++ * address of an instruction that is allowed to fault, and the second is ++ * the address at which the program should continue. No registers are ++ * modified, so it is entirely up to the continuation code to figure out ++ * what to do. ++ * ++ * All the routines below use bits of fixup code that are out of line ++ * with the main instruction path. This means when everything is well, ++ * we don't even have to jump over them. Further, they do not intrude ++ * on our cache or tlb entries. ++ */ ++ ++struct exception_table_entry ++{ ++ unsigned long insn, fixup; ++}; ++ ++extern int __put_user_bad(void); ++extern int __get_user_bad(void); ++ ++#define __put_user_asm(res, x, ptr, bwl, reg, err) \ ++asm volatile ("\n" \ ++ "1: move."#bwl" %2,%1\n" \ ++ "2:\n" \ ++ " .section .fixup,\"ax\"\n" \ ++ " .even\n" \ ++ "10: moveq.l %3,%0\n" \ ++ " jra 2b\n" \ ++ " .previous\n" \ ++ "\n" \ ++ " .section __ex_table,\"a\"\n" \ ++ " .align 4\n" \ ++ " .long 1b,10b\n" \ ++ " .long 2b,10b\n" \ ++ " .previous" \ ++ : "+d" (res), "=m" (*(ptr)) \ ++ : #reg (x), "i" (err)) ++ ++/* ++ * These are the main single-value transfer routines. They automatically ++ * use the right size if we just have the right pointer type. ++ */ ++ ++#define __put_user(x, ptr) \ ++({ \ ++ typeof(*(ptr)) __pu_val = (x); \ ++ int __pu_err = 0; \ ++ __chk_user_ptr(ptr); \ ++ switch (sizeof (*(ptr))) { \ ++ case 1: \ ++ __put_user_asm(__pu_err, __pu_val, ptr, b, d, -EFAULT); \ ++ break; \ ++ case 2: \ ++ __put_user_asm(__pu_err, __pu_val, ptr, w, d, -EFAULT); \ ++ break; \ ++ case 4: \ ++ __put_user_asm(__pu_err, __pu_val, ptr, l, r, -EFAULT); \ ++ break; \ ++ case 8: \ ++ { \ ++ const void __user *__pu_ptr = (ptr); \ ++ asm volatile ("\n" \ ++ "1: move.l %2,(%1)+\n" \ ++ "2: move.l %R2,(%1)\n" \ ++ "3:\n" \ ++ " .section .fixup,\"ax\"\n" \ ++ " .even\n" \ ++ "10: movel %3,%0\n" \ ++ " jra 3b\n" \ ++ " .previous\n" \ ++ "\n" \ ++ " .section __ex_table,\"a\"\n" \ ++ " .align 4\n" \ ++ " .long 1b,10b\n" \ ++ " .long 2b,10b\n" \ ++ " .long 3b,10b\n" \ ++ " .previous" \ ++ : "+d" (__pu_err), "+a" (__pu_ptr) \ ++ : "r" (__pu_val), "i" (-EFAULT) \ ++ : "memory"); \ ++ break; \ ++ } \ ++ default: \ ++ __pu_err = __put_user_bad(); \ ++ break; \ ++ } \ ++ __pu_err; \ ++}) ++#define put_user(x, ptr) __put_user(x, ptr) ++ ++ ++#define __get_user_asm(res, x, ptr, type, bwl, reg, err) ({ \ ++ type __gu_val; \ ++ asm volatile ("\n" \ ++ "1: move."#bwl" %2,%1\n" \ ++ "2:\n" \ ++ " .section .fixup,\"ax\"\n" \ ++ " .even\n" \ ++ "10: move.l %3,%0\n" \ ++ " subl %1,%1\n" \ ++ " jra 2b\n" \ ++ " .previous\n" \ ++ "\n" \ ++ " .section __ex_table,\"a\"\n" \ ++ " .align 4\n" \ ++ " .long 1b,10b\n" \ ++ " .previous" \ ++ : "+d" (res), "=&" #reg (__gu_val) \ ++ : "m" (*(ptr)), "i" (err)); \ ++ (x) = (typeof(*(ptr)))(unsigned long)__gu_val; \ ++}) ++ ++#define __get_user(x, ptr) \ ++({ \ ++ int __gu_err = 0; \ ++ __chk_user_ptr(ptr); \ ++ switch (sizeof(*(ptr))) { \ ++ case 1: \ ++ __get_user_asm(__gu_err, x, ptr, u8, b, d, -EFAULT); \ ++ break; \ ++ case 2: \ ++ __get_user_asm(__gu_err, x, ptr, u16, w, d, -EFAULT); \ ++ break; \ ++ case 4: \ ++ __get_user_asm(__gu_err, x, ptr, u32, l, r, -EFAULT); \ ++ break; \ ++/* case 8: disabled because gcc-4.1 has a broken typeof \ ++ { \ ++ const void *__gu_ptr = (ptr); \ ++ u64 __gu_val; \ ++ asm volatile ("\n" \ ++ "1: move.l (%2)+,%1\n" \ ++ "2: move.l (%2),%R1\n" \ ++ "3:\n" \ ++ " .section .fixup,\"ax\"\n" \ ++ " .even\n" \ ++ "10: move.l %3,%0\n" \ ++ " subl %1,%1\n" \ ++ " subl %R1,%R1\n" \ ++ " jra 3b\n" \ ++ " .previous\n" \ ++ "\n" \ ++ " .section __ex_table,\"a\"\n" \ ++ " .align 4\n" \ ++ " .long 1b,10b\n" \ ++ " .long 2b,10b\n" \ ++ " .previous" \ ++ : "+d" (__gu_err), "=&r" (__gu_val), \ ++ "+a" (__gu_ptr) \ ++ : "i" (-EFAULT) \ ++ : "memory"); \ ++ (x) = (typeof(*(ptr)))__gu_val; \ ++ break; \ ++ } */ \ ++ default: \ ++ __gu_err = __get_user_bad(); \ ++ break; \ ++ } \ ++ __gu_err; \ ++}) ++#define get_user(x, ptr) __get_user(x, ptr) ++ ++unsigned long __generic_copy_from_user(void *to, const void __user *from, ++ unsigned long n); ++unsigned long __generic_copy_to_user(void __user *to, const void *from, ++ unsigned long n); ++ ++#define __constant_copy_from_user_asm(res, to, from, tmp, n, s1, s2, s3)\ ++ asm volatile ("\n" \ ++ "1: move."#s1" (%2)+,%3\n" \ ++ " move."#s1" %3,(%1)+\n" \ ++ "2: move."#s2" (%2)+,%3\n" \ ++ " move."#s2" %3,(%1)+\n" \ ++ " .ifnc \""#s3"\",\"\"\n" \ ++ "3: move."#s3" (%2)+,%3\n" \ ++ " move."#s3" %3,(%1)+\n" \ ++ " .endif\n" \ ++ "4:\n" \ ++ " .section __ex_table,\"a\"\n" \ ++ " .align 4\n" \ ++ " .long 1b,10f\n" \ ++ " .long 2b,20f\n" \ ++ " .ifnc \""#s3"\",\"\"\n" \ ++ " .long 3b,30f\n" \ ++ " .endif\n" \ ++ " .previous\n" \ ++ "\n" \ ++ " .section .fixup,\"ax\"\n" \ ++ " .even\n" \ ++ "10: clr."#s1" (%1)+\n" \ ++ "20: clr."#s2" (%1)+\n" \ ++ " .ifnc \""#s3"\",\"\"\n" \ ++ "30: clr."#s3" (%1)+\n" \ ++ " .endif\n" \ ++ " moveq.l #"#n",%0\n" \ ++ " jra 4b\n" \ ++ " .previous\n" \ ++ : "+d" (res), "+&a" (to), "+a" (from), "=&d" (tmp) \ ++ : : "memory") ++ ++static __always_inline unsigned long ++__constant_copy_from_user(void *to, const void __user *from, unsigned long n) ++{ ++ unsigned long res = 0, tmp; ++ ++ switch (n) { ++ case 1: ++ __get_user_asm(res, *(u8 *)to, (u8 __user *)from, u8, b, d, 1); ++ break; ++ case 2: ++ __get_user_asm(res, *(u16 *)to, (u16 __user *)from, u16, w, ++ d, 2); ++ break; ++ case 3: ++ __constant_copy_from_user_asm(res, to, from, tmp, 3, w, b,); ++ break; ++ case 4: ++ __get_user_asm(res, *(u32 *)to, (u32 __user *)from, u32, l, ++ r, 4); ++ break; ++ case 5: ++ __constant_copy_from_user_asm(res, to, from, tmp, 5, l, b,); ++ break; ++ case 6: ++ __constant_copy_from_user_asm(res, to, from, tmp, 6, l, w,); ++ break; ++ case 7: ++ __constant_copy_from_user_asm(res, to, from, tmp, 7, l, w, b); ++ break; ++ case 8: ++ __constant_copy_from_user_asm(res, to, from, tmp, 8, l, l,); ++ break; ++ case 9: ++ __constant_copy_from_user_asm(res, to, from, tmp, 9, l, l, b); ++ break; ++ case 10: ++ __constant_copy_from_user_asm(res, to, from, tmp, 10, l, l, w); ++ break; ++ case 12: ++ __constant_copy_from_user_asm(res, to, from, tmp, 12, l, l, l); ++ break; ++ default: ++ /* we limit the inlined version to 3 moves */ ++ return __generic_copy_from_user(to, from, n); ++ } ++ ++ return res; ++} ++ ++#define __constant_copy_to_user_asm(res, to, from, tmp, n, s1, s2, s3) \ ++ asm volatile ("\n" \ ++ " move."#s1" (%2)+,%3\n" \ ++ "11: move."#s1" %3,(%1)+\n" \ ++ "12: move."#s2" (%2)+,%3\n" \ ++ "21: move."#s2" %3,(%1)+\n" \ ++ "22:\n" \ ++ " .ifnc \""#s3"\",\"\"\n" \ ++ " move."#s3" (%2)+,%3\n" \ ++ "31: move."#s3" %3,(%1)+\n" \ ++ "32:\n" \ ++ " .endif\n" \ ++ "4:\n" \ ++ "\n" \ ++ " .section __ex_table,\"a\"\n" \ ++ " .align 4\n" \ ++ " .long 11b,5f\n" \ ++ " .long 12b,5f\n" \ ++ " .long 21b,5f\n" \ ++ " .long 22b,5f\n" \ ++ " .ifnc \""#s3"\",\"\"\n" \ ++ " .long 31b,5f\n" \ ++ " .long 32b,5f\n" \ ++ " .endif\n" \ ++ " .previous\n" \ ++ "\n" \ ++ " .section .fixup,\"ax\"\n" \ ++ " .even\n" \ ++ "5: moveq.l #"#n",%0\n" \ ++ " jra 4b\n" \ ++ " .previous\n" \ ++ : "+d" (res), "+a" (to), "+a" (from), "=&d" (tmp) \ ++ : : "memory") ++ ++static __always_inline unsigned long ++__constant_copy_to_user(void __user *to, const void *from, unsigned long n) ++{ ++ unsigned long res = 0, tmp; ++ ++ switch (n) { ++ case 1: ++ __put_user_asm(res, *(u8 *)from, (u8 __user *)to, b, d, 1); ++ break; ++ case 2: ++ __put_user_asm(res, *(u16 *)from, (u16 __user *)to, w, d, 2); ++ break; ++ case 3: ++ __constant_copy_to_user_asm(res, to, from, tmp, 3, w, b,); ++ break; ++ case 4: ++ __put_user_asm(res, *(u32 *)from, (u32 __user *)to, l, r, 4); ++ break; ++ case 5: ++ __constant_copy_to_user_asm(res, to, from, tmp, 5, l, b,); ++ break; ++ case 6: ++ __constant_copy_to_user_asm(res, to, from, tmp, 6, l, w,); ++ break; ++ case 7: ++ __constant_copy_to_user_asm(res, to, from, tmp, 7, l, w, b); ++ break; ++ case 8: ++ __constant_copy_to_user_asm(res, to, from, tmp, 8, l, l,); ++ break; ++ case 9: ++ __constant_copy_to_user_asm(res, to, from, tmp, 9, l, l, b); ++ break; ++ case 10: ++ __constant_copy_to_user_asm(res, to, from, tmp, 10, l, l, w); ++ break; ++ case 12: ++ __constant_copy_to_user_asm(res, to, from, tmp, 12, l, l, l); ++ break; ++ default: ++ /* limit the inlined version to 3 moves */ ++ return __generic_copy_to_user(to, from, n); ++ } ++ ++ return res; ++} ++ ++#define __copy_from_user(to, from, n) \ ++(__builtin_constant_p(n) ? \ ++ __constant_copy_from_user(to, from, n) : \ ++ __generic_copy_from_user(to, from, n)) ++ ++#define __copy_to_user(to, from, n) \ ++(__builtin_constant_p(n) ? \ ++ __constant_copy_to_user(to, from, n) : \ ++ __generic_copy_to_user(to, from, n)) ++ ++#define __copy_to_user_inatomic __copy_to_user ++#define __copy_from_user_inatomic __copy_from_user ++ ++#define copy_from_user(to, from, n) __copy_from_user(to, from, n) ++#define copy_to_user(to, from, n) __copy_to_user(to, from, n) ++ ++long strncpy_from_user(char *dst, const char __user *src, long count); ++long strnlen_user(const char __user *src, long n); ++unsigned long __clear_user(void __user *to, unsigned long n); ++ ++#define clear_user __clear_user ++ ++#define strlen_user(str) strnlen_user(str, 32767) ++ ++#endif /* _M68K_CF_UACCESS_H */ +--- a/include/asm-m68k/checksum.h ++++ b/include/asm-m68k/checksum.h +@@ -34,6 +34,7 @@ extern __wsum csum_partial_copy_nocheck( + void *dst, int len, + __wsum sum); + ++#ifndef CONFIG_COLDFIRE /* CF has own copy in arch/m68k/lib/checksum.c */ + /* + * This is a version of ip_compute_csum() optimized for IP headers, + * which always checksum on 4 octet boundaries. +@@ -59,6 +60,9 @@ static inline __sum16 ip_fast_csum(const + : "memory"); + return (__force __sum16)~sum; + } ++#else ++extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl); ++#endif + + /* + * Fold a partial checksum +@@ -67,6 +71,11 @@ static inline __sum16 ip_fast_csum(const + static inline __sum16 csum_fold(__wsum sum) + { + unsigned int tmp = (__force u32)sum; ++#ifdef CONFIG_COLDFIRE ++ tmp = (tmp & 0xffff) + (tmp >> 16); ++ tmp = (tmp & 0xffff) + (tmp >> 16); ++ return (__force __sum16) ~tmp; ++#else + __asm__("swap %1\n\t" + "addw %1, %0\n\t" + "clrw %1\n\t" +@@ -74,6 +83,7 @@ static inline __sum16 csum_fold(__wsum s + : "=&d" (sum), "=&d" (tmp) + : "0" (sum), "1" (tmp)); + return (__force __sum16)~sum; ++#endif + } + + +--- /dev/null ++++ b/include/asm-m68k/coldfire_edma.h +@@ -0,0 +1,125 @@ ++/* ++ * coldfire_edma.h - eDMA driver for Coldfire MCF5445x ++ * ++ * Yaroslav Vinogradov yaroslav.vinogradov@freescale.com ++ * ++ * Copyright Freescale Semiconductor, Inc. 2007 ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ */ ++ ++#ifndef _LINUX_COLDFIRE_DMA_H ++#define _LINUX_COLDFIRE_DMA_H ++ ++#include <linux/interrupt.h> ++#include <asm/mcf5445x_edma.h> ++ ++#define EDMA_DRIVER_NAME "ColdFire-eDMA" ++#define DMA_DEV_MINOR 1 ++ ++#ifdef CONFIG_M5445X ++#define EDMA_INT_CHANNEL_BASE 8 ++#define EDMA_INT_CONTROLLER_BASE 64 ++#define EDMA_INT_BASE (EDMA_INT_CHANNEL_BASE + \ ++ EDMA_INT_CONTROLLER_BASE) ++#define EDMA_CHANNELS 16 ++#define EDMA_INT_ERR 16 /* edma error interrupt */ ++#endif /* CONFIG_M5445X */ ++ ++typedef irqreturn_t (*edma_irq_handler)(int, void *); ++typedef void (*edma_error_handler)(int, void *); ++ ++/* Setup transfer control descriptor (TCD) ++ * channel - descriptor number ++ * source - source address ++ * dest - destination address ++ * attr - attributes ++ * soff - source offset ++ * nbytes - number of bytes to be transfered in minor loop ++ * slast - last source address adjustment ++ * citer - major loop count ++ * biter - begining minor loop count ++ * doff - destination offset ++ * dlast_sga - last destination address adjustment ++ * major_int - generate interrupt after each major loop ++ * disable_req - disable DMA request after major loop ++ */ ++void set_edma_params(int channel, u32 source, u32 dest, ++ u32 attr, u32 soff, u32 nbytes, u32 slast, ++ u32 citer, u32 biter, u32 doff, u32 dlast_sga, ++ int major_int, int disable_req); ++ ++/* Starts eDMA transfer on specified channel ++ * channel - eDMA TCD number ++ */ ++static inline void start_edma_transfer(int channel) ++{ ++ MCF_EDMA_SERQ = channel; ++ MCF_EDMA_SSRT = channel; ++} ++ ++/* Stops eDMA transfer ++ * channel - eDMA TCD number ++ */ ++static inline void stop_edma_transfer(int channel) ++{ ++ MCF_EDMA_CINT = channel; ++ MCF_EDMA_CERQ = channel; ++} ++ ++ ++/* Confirm that interrupt has been handled ++ * channel - eDMA TCD number ++ */ ++static inline void confirm_edma_interrupt_handled(int channel) ++{ ++ MCF_EDMA_CINT = channel; ++} ++ ++/* Initialize eDMA controller */ ++void init_edma(void); ++ ++/* Request eDMA channel: ++ * channel - eDMA TCD number ++ * handler - channel IRQ callback ++ * error_handler - error interrupt handler callback for channel ++ * dev - device ++ * lock - spinlock to be locked (can be NULL) ++ * device_id - device driver name for proc file system output ++ */ ++int request_edma_channel(int channel, ++ edma_irq_handler handler, ++ edma_error_handler error_handler, ++ void *dev, ++ spinlock_t *lock, ++ const char *device_id); ++ ++/** ++ * set_edma_callback - Update the channel callback/arg ++ * @channel: channel number ++ * @handler: dma handler ++ * @error_handler: dma error handler ++ * @arg: argument to pass back ++ * ++ * Returns 0 if success or a negative value if failure ++ */ ++int set_edma_callback(int channel, ++ edma_irq_handler handler, ++ edma_error_handler error_handler, ++ void *arg); ++ ++/* Free eDMA channel ++ * channel - eDMA TCD number ++ * dev - device ++ */ ++int free_edma_channel(int channel, void *dev); ++ ++/* ++ * DMA Modes ++ */ ++#define DMA_MODE_READ 0 ++#define DMA_MODE_WRITE 1 ++#endif +--- /dev/null ++++ b/include/asm-m68k/coldfire.h +@@ -0,0 +1,51 @@ ++#ifndef _COLDFIRE_H_ ++#define _COLDFIRE_H_ ++ ++#if defined(CONFIG_M5445X) ++#define MCF_MBAR 0x0 ++/* ++ * Even though RAMBAR1 should be in the 0x8xxxxxxx range there ++ * is a problem that needs to be resolved. Currently head.S ++ * disables SRAM/RAMBAR1. ++ */ ++#define MCF_RAMBAR1 0x40000000 ++#define MCF_SRAM 0x40000000 ++#elif defined(CONFIG_M547X_8X) ++#define MCF_MBAR 0xF0000000 ++#define MCF_MMUBAR 0xF1000000 ++#define MCF_RAMBAR0 0xF3000000 ++#define MCF_RAMBAR1 0xF3001000 ++#endif ++ ++#define MCF_CLK CONFIG_MCFCLK ++#define MCF_BUSCLK (CONFIG_MCFCLK/2) ++ ++#ifdef __ASSEMBLY__ ++#define REG32 ++#define REG16 ++#define REG08 ++#else /* __ASSEMBLY__ */ ++#define REG32(x) ((volatile unsigned long *)(x)) ++#define REG16(x) ((volatile unsigned short *)(x)) ++#define REG08(x) ((volatile unsigned char *)(x)) ++ ++#define MCF_REG32(x) *(volatile unsigned long *)(MCF_MBAR+(x)) ++#define MCF_REG16(x) *(volatile unsigned short *)(MCF_MBAR+(x)) ++#define MCF_REG08(x) *(volatile unsigned char *)(MCF_MBAR+(x)) ++ ++void cacr_set(unsigned long); ++unsigned long cacr_get(void); ++ ++#define coldfire_enable_irq0(irq) MCF_INTC0_CIMR = (irq); ++ ++#define coldfire_enable_irq1(irq) MCF_INTC1_CIMR = (irq); ++ ++#define coldfire_disable_irq0(irq) MCF_INTC0_SIMR = (irq); ++ ++#define coldfire_disable_irq1(irq) MCF_INTC1_SIMR = (irq); ++ ++#define getiprh() MCF_INTC0_IPRH ++ ++#endif /* __ASSEMBLY__ */ ++ ++#endif /* _COLDFIRE_H_ */ +--- a/include/asm-m68k/delay.h ++++ b/include/asm-m68k/delay.h +@@ -11,8 +11,25 @@ + + static inline void __delay(unsigned long loops) + { ++#if defined(CONFIG_COLDFIRE) ++ /* The coldfire runs this loop at significantly different speeds ++ * depending upon long word alignment or not. We'll pad it to ++ * long word alignment which is the faster version. ++ * The 0x4a8e is of course a 'tstl %fp' instruction. This is better ++ * than using a NOP (0x4e71) instruction because it executes in one ++ * cycle not three and doesn't allow for an arbitary delay waiting ++ * for bus cycles to finish. Also fp/a6 isn't likely to cause a ++ * stall waiting for the register to become valid if such is added ++ * to the coldfire at some stage. ++ */ ++ __asm__ __volatile__ (".balignw 4, 0x4a8e\n\t" ++ "1: subql #1, %0\n\t" ++ "jcc 1b" ++ : "=d" (loops) : "0" (loops)); ++#else + __asm__ __volatile__ ("1: subql #1,%0; jcc 1b" + : "=d" (loops) : "0" (loops)); ++#endif + } + + extern void __bad_udelay(void); +@@ -26,12 +43,17 @@ extern void __bad_udelay(void); + */ + static inline void __const_udelay(unsigned long xloops) + { ++#if defined(CONFIG_COLDFIRE) ++ ++ __delay(((((unsigned long long) xloops * loops_per_jiffy))>>32)*HZ); ++#else + unsigned long tmp; + + __asm__ ("mulul %2,%0:%1" + : "=d" (xloops), "=d" (tmp) + : "d" (xloops), "1" (loops_per_jiffy)); + __delay(xloops * HZ); ++#endif + } + + static inline void __udelay(unsigned long usecs) +@@ -46,12 +68,16 @@ static inline void __udelay(unsigned lon + static inline unsigned long muldiv(unsigned long a, unsigned long b, + unsigned long c) + { ++#if defined(CONFIG_COLDFIRE) ++ return (long)(((unsigned long long)a * b)/c); ++#else + unsigned long tmp; + + __asm__ ("mulul %2,%0:%1; divul %3,%0:%1" + : "=d" (tmp), "=d" (a) + : "d" (b), "d" (c), "1" (a)); + return a; ++#endif + } + + #endif /* defined(_M68K_DELAY_H) */ +--- a/include/asm-m68k/div64.h ++++ b/include/asm-m68k/div64.h +@@ -5,6 +5,7 @@ + + /* n = n / base; return rem; */ + ++#ifndef CONFIG_COLDFIRE + #define do_div(n, base) ({ \ + union { \ + unsigned long n32[2]; \ +@@ -24,6 +25,9 @@ + (n) = __n.n64; \ + __rem; \ + }) ++#else ++# include <asm-generic/div64.h> ++#endif + + extern uint64_t div64_64(uint64_t dividend, uint64_t divisor); + #endif /* _M68K_DIV64_H */ +--- a/include/asm-m68k/dma.h ++++ b/include/asm-m68k/dma.h +@@ -1,16 +1,120 @@ + #ifndef _M68K_DMA_H + #define _M68K_DMA_H 1 + +- + /* it's useless on the m68k, but unfortunately needed by the new + bootmem allocator (but this should do it for this) */ + #define MAX_DMA_ADDRESS PAGE_OFFSET + ++#ifndef CONFIG_COLDFIRE + #define MAX_DMA_CHANNELS 8 + + extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */ + extern void free_dma(unsigned int dmanr); /* release it again */ + ++#else /* not (defined(CONFIG_MCF5474) || defined(CONFIG_MCF5484) || defined(CONFIG_MCF5475) || defined(CONFIG_MCF5485)) */ ++ ++/************************************************ ++ * Multichannel DMA definitions * ++ ************************************************/ ++#ifdef CONFIG_MCD_DMA ++#include <asm/MCD_dma.h> ++#include <asm/m5485dma.h> ++ ++struct scatterlist; ++ ++#define MAX_DMA_CHANNELS NCHANNELS ++/* ++ * identifiers for each initiator/requestor ++ */ ++#define DMA_ALWAYS (0) ++#define DMA_DSPI_RX (1) ++#define DMA_DSPI_TX (2) ++#define DMA_DREQ0 (3) ++#define DMA_PSC0_RX (4) ++#define DMA_PSC0_TX (5) ++#define DMA_USBEP0 (6) ++#define DMA_USBEP1 (7) ++#define DMA_USBEP2 (8) ++#define DMA_USBEP3 (9) ++#define DMA_PCI_TX (10) ++#define DMA_PCI_RX (11) ++#define DMA_PSC1_RX (12) ++#define DMA_PSC1_TX (13) ++#define DMA_I2C_RX (14) ++#define DMA_I2C_TX (15) ++#define DMA_FEC0_RX (16) ++#define DMA_FEC0_TX (17) ++#define DMA_FEC1_RX (18) ++#define DMA_FEC1_TX (19) ++#define DMA_DREQ1 (20) ++#define DMA_CTM0 (21) ++#define DMA_CTM1 (22) ++#define DMA_CTM2 (23) ++#define DMA_CTM3 (24) ++#define DMA_CTM4 (25) ++#define DMA_CTM5 (26) ++#define DMA_CTM6 (27) ++#define DMA_CTM7 (28) ++#define DMA_USBEP4 (29) ++#define DMA_USBEP5 (30) ++#define DMA_USBEP6 (31) ++#define DMA_PSC2_RX (32) ++#define DMA_PSC2_TX (33) ++#define DMA_PSC3_RX (34) ++#define DMA_PSC3_TX (35) ++#define DMA_FEC_RX(x) ((x == 0) ? DMA_FEC0_RX : DMA_FEC1_RX) ++#define DMA_FEC_TX(x) ((x == 0) ? DMA_FEC0_TX : DMA_FEC1_TX) ++ ++int dma_set_initiator(int); ++unsigned int dma_get_initiator(int); ++void dma_remove_initiator(int); ++int dma_set_channel(int); ++int dma_get_channel(int); ++void dma_remove_channel(int); ++int dma_set_channel_fec(int requestor); ++int dma_connect(int channel, int address); ++int dma_disconnect(int channel); ++void dma_remove_channel_by_number(int channel); ++int dma_init(void); ++ ++#endif /* CONFIG_MCD_DMA */ ++ ++extern spinlock_t dma_spin_lock; ++ ++static __inline__ unsigned long claim_dma_lock(void) ++{ ++ unsigned long flags; ++ spin_lock_irqsave(&dma_spin_lock, flags); ++ return flags; ++} ++ ++static __inline__ void release_dma_lock(unsigned long flags) ++{ ++ spin_unlock_irqrestore(&dma_spin_lock, flags); ++} ++ ++ ++/* ++ * Linux standard DMA stuff ++ */ ++#if 0 ++int request_dma(unsigned int channel, const char * device_id); ++void free_dma(unsigned int channel); ++void enable_dma(unsigned int channel); ++void disable_dma(unsigned int channel); ++int dma_channel_active(unsigned int channel); ++void set_dma_sg(unsigned int channel, struct scatterlist *sg, int nr_sg); ++void set_dma_page(unsigned int channel, char pagenr); ++void set_dma_addr(unsigned int channel, unsigned long physaddr); ++void set_dma_count(unsigned int channel, unsigned long count); ++void set_dma_mode(unsigned int channel, unsigned int mode); ++void set_dma_speed(unsigned int channel, int cycle_ns); ++int get_dma_residue(unsigned int channel); ++#endif ++#define clear_dma_ff(channel) ++ ++#endif /* not (defined(CONFIG_MCF5474) || defined(CONFIG_MCF5484) || defined(CONFIG_MCF5475) || defined(CONFIG_MCF5485)) */ ++ + #ifdef CONFIG_PCI + extern int isa_dma_bridge_buggy; + #else +--- a/include/asm-m68k/elf.h ++++ b/include/asm-m68k/elf.h +@@ -34,6 +34,26 @@ + #define R_68K_GLOB_DAT 20 + #define R_68K_JMP_SLOT 21 + #define R_68K_RELATIVE 22 ++/* TLS static relocations */ ++#define R_68K_TLS_GD32 25 ++#define R_68K_TLS_GD16 26 ++#define R_68K_TLS_GD8 27 ++#define R_68K_TLS_LDM32 28 ++#define R_68K_TLS_LDM16 29 ++#define R_68K_TLS_LDM8 30 ++#define R_68K_TLS_LDO32 31 ++#define R_68K_TLS_LDO16 32 ++#define R_68K_TLS_LDO8 33 ++#define R_68K_TLS_IE32 34 ++#define R_68K_TLS_IE16 35 ++#define R_68K_TLS_IE8 36 ++#define R_68K_TLS_LE32 37 ++#define R_68K_TLS_LE16 38 ++#define R_68K_TLS_LE8 39 ++/* TLS dynamic relocations */ ++#define R_68K_TLS_DTPMOD32 40 ++#define R_68K_TLS_DTPREL32 41 ++#define R_68K_TLS_TPREL32 42 + + typedef unsigned long elf_greg_t; + +@@ -60,7 +80,7 @@ typedef struct user_m68kfp_struct elf_fp + #define ELF_PLAT_INIT(_r, load_addr) _r->a1 = 0 + + #define USE_ELF_CORE_DUMP +-#ifndef CONFIG_SUN3 ++#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE) + #define ELF_EXEC_PAGESIZE 4096 + #else + #define ELF_EXEC_PAGESIZE 8192 +@@ -116,4 +136,35 @@ typedef struct user_m68kfp_struct elf_fp + + #define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX) + ++/* ++ * VDSO ++ */ ++#ifdef CONFIG_VSYSCALL ++extern unsigned int vdso_enabled; ++ ++#define VDSO_BASE ((unsigned long)current->mm->context.vdso) ++#define VDSO_SYM(x) (VDSO_BASE + (unsigned long)(x)) ++ ++#define VSYSCALL_AUX_ENT \ ++ if (vdso_enabled) \ ++ NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE); ++ ++/* additional pages */ ++#define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1 ++ ++struct linux_binprm; ++extern int arch_setup_additional_pages(struct linux_binprm *bprm, ++ int executable_stack); ++ ++#else ++/* no VSYSCALL_AUX_ENT */ ++#define VSYSCALL_AUX_ENT ++#endif ++ ++#define ARCH_DLINFO \ ++do { \ ++ /* vsyscall entry */ \ ++ VSYSCALL_AUX_ENT; \ ++} while (0); ++ + #endif +--- a/include/asm-m68k/fpu.h ++++ b/include/asm-m68k/fpu.h +@@ -12,6 +12,8 @@ + #define FPSTATESIZE (96/sizeof(unsigned char)) + #elif defined(CONFIG_M68KFPU_EMU) + #define FPSTATESIZE (28/sizeof(unsigned char)) ++#elif defined(CONFIG_CFV4E) ++#define FPSTATESIZE (16/sizeof(unsigned char)) + #elif defined(CONFIG_M68060) + #define FPSTATESIZE (12/sizeof(unsigned char)) + #else +--- a/include/asm-m68k/io.h ++++ b/include/asm-m68k/io.h +@@ -204,6 +204,12 @@ static inline u16 __iomem *isa_mtw(unsig + #define isa_outw(val,port) (ISA_SEX ? out_be16(isa_itw(port),(val)) : out_le16(isa_itw(port),(val))) + #define isa_outl(val,port) (ISA_SEX ? out_be32(isa_itl(port),(val)) : out_le32(isa_itl(port),(val))) + ++#ifndef CONFIG_COLDFIRE ++#define isa_readb(p) in_8(isa_mtb(p)) ++#define isa_readw(p) (ISA_SEX ? in_be16(isa_mtw(p)) : in_le16(isa_mtw(p))) ++#define isa_writeb(val,p) out_8(isa_mtb(p),(val)) ++#define isa_writew(val,p) (ISA_SEX ? out_be16(isa_mtw(p),(val)) : out_le16(isa_mtw(p),(val))) ++#else + #define isa_readb(p) in_8(isa_mtb((unsigned long)(p))) + #define isa_readw(p) \ + (ISA_SEX ? in_be16(isa_mtw((unsigned long)(p))) \ +@@ -212,7 +218,7 @@ static inline u16 __iomem *isa_mtw(unsig + #define isa_writew(val,p) \ + (ISA_SEX ? out_be16(isa_mtw((unsigned long)(p)),(val)) \ + : out_le16(isa_mtw((unsigned long)(p)),(val))) +- ++#endif + static inline void isa_delay(void) + { + switch(ISA_TYPE) +@@ -285,6 +291,29 @@ static inline void isa_delay(void) + #endif /* CONFIG_ISA */ + + #if defined(CONFIG_PCI) ++#ifdef CONFIG_COLDFIRE ++#define inb_p inb ++#define inw_p inw ++#define inl_p inl ++#define outb_p outb ++#define outw_p outw ++#define outl_p outl ++ ++unsigned char pci_inb(long addr); ++unsigned short pci_inw(long addr); ++unsigned long pci_inl(long addr); ++void pci_outb(unsigned char val, long addr); ++void pci_outw(unsigned short val, long addr); ++void pci_outl(unsigned long val, long addr); ++ ++void pci_insb(volatile unsigned char* addr, unsigned char* buf, int len); ++void pci_insw(volatile unsigned short* addr, unsigned short* buf, int len); ++void pci_insl(volatile unsigned long* addr, unsigned long* buf, int len); ++ ++void pci_outsb(volatile unsigned char* addr, const unsigned char* buf, int len); ++void pci_outsw(volatile unsigned short* addr, const unsigned short* buf, int len); ++void pci_outsl(volatile unsigned long* addr, const unsigned long* buf, int len); ++#endif + + #define readl(addr) in_le32(addr) + #define writel(val,addr) out_le32((addr),(val)) +@@ -300,12 +329,48 @@ static inline void isa_delay(void) + #define readl_relaxed(addr) readl(addr) + + #ifndef CONFIG_ISA ++#ifndef CONFIG_COLDFIRE + #define inb(port) in_8(port) + #define outb(val,port) out_8((port),(val)) + #define inw(port) in_le16(port) + #define outw(val,port) out_le16((port),(val)) + #define inl(port) in_le32(port) + #define outl(val,port) out_le32((port),(val)) ++#define insb(port, buf, nr) \ ++ raw_insb((u8 *)(port), (u8 *)(buf), (nr)) ++#define outsb(port, buf, nr) \ ++ raw_outsb((u8 *)(port), (u8 *)(buf), (nr)) ++#define insw(port, buf, nr) \ ++ raw_insw_swapw((u16 *)(port), (u16 *)(buf), (nr)) ++#define outsw(port, buf, nr) \ ++ raw_outsw_swapw((u16 *)(port), (u16 *)(buf), (nr)) ++#define insl(port, buf, nr) \ ++ raw_insw_swapw((u16 *)(port), (u16 *)(buf), (nr)<<1) ++#define outsl(port, buf, nr) \ ++ raw_outsw_swapw((u16 *)(port), (u16 *)(buf), (nr)<<1) ++#else ++#define inb(port) pci_inb(port) ++#define outb(val,port) pci_outb((val),(port)) ++#define inw(port) pci_inw(port) ++#define outw(val,port) pci_outw((val),(port)) ++#define insb(a,b,c) pci_insb((volatile unsigned char*)a,(unsigned char*)b,c) ++#define insw(a,b,c) pci_insw((volatile unsigned short*)a,(const unsigned short*)b,c) ++#define insl(a,b,c) pci_insl((volatile unsigned long*)a,(const unsigned long*)b,c) ++#define outsb(a,b,c) pci_outsb((volatile unsigned char*)a,(const unsigned char*)b,c) ++#define outsw(a,b,c) pci_outsw((volatile unsigned short*)a,(const unsigned short*)b,c) ++#define outsl(a,b,c) pci_outsl((volatile unsigned long*)a,(const unsigned long*)b,c) ++#define inl(port) pci_inl(port) ++#define outl(val,port) pci_outl((val),(port)) ++#endif ++ ++#ifndef CONFIG_COLDFIRE ++#define __raw_readb readb ++#define __raw_readw readw ++#define __raw_readl readl ++#define __raw_writeb writeb ++#define __raw_writew writew ++#define __raw_writel writel ++#endif + + #else + /* +@@ -397,10 +462,12 @@ static inline void memcpy_toio(volatile + __builtin_memcpy((void __force *) dst, src, count); + } + +-#ifndef CONFIG_SUN3 +-#define IO_SPACE_LIMIT 0xffff +-#else ++#if defined(CONFIG_SUN3) + #define IO_SPACE_LIMIT 0x0fffffff ++#elif defined(CONFIG_COLDFIRE) ++#define IO_SPACE_LIMIT 0xffffffff ++#else ++#define IO_SPACE_LIMIT 0xffff + #endif + + #endif /* __KERNEL__ */ +@@ -418,4 +485,31 @@ static inline void memcpy_toio(volatile + */ + #define xlate_dev_kmem_ptr(p) p + ++#ifdef CONFIG_COLDFIRE ++#define __raw_readb(addr) \ ++ ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; }) ++#define __raw_readw(addr) \ ++ ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; }) ++#define __raw_readl(addr) \ ++ ({ unsigned long __v = (*(volatile unsigned long *) (addr)); __v; }) ++#define __raw_writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b)) ++#define __raw_writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b)) ++#define __raw_writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b)) ++ ++#define memset_io(a, b, c) memset((void *)(a), (b), (c)) ++#define memcpy_fromio(a, b, c) memcpy((a), (void *)(b), (c)) ++#define memcpy_toio(a, b, c) memcpy((void *)(a), (b), (c)) ++#if !defined(readb) ++#define readb(addr) \ ++ ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; }) ++#define readw(addr) \ ++ ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; }) ++#define readl(addr) \ ++ ({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; }) ++#define writeb(b, addr) (void)((*(volatile unsigned char *) (addr)) = (b)) ++#define writew(b, addr) (void)((*(volatile unsigned short *) (addr)) = (b)) ++#define writel(b, addr) (void)((*(volatile unsigned int *) (addr)) = (b)) ++#endif /* readb */ ++#endif /* CONFIG_COLDFIRE */ ++ + #endif /* _IO_H */ +--- a/include/asm-m68k/irq.h ++++ b/include/asm-m68k/irq.h +@@ -11,7 +11,10 @@ + * Currently the Atari has 72 and the Amiga 24, but if both are + * supported in the kernel it is better to make room for 72. + */ +-#if defined(CONFIG_VME) || defined(CONFIG_SUN3) || defined(CONFIG_SUN3X) ++#if defined(CONFIG_COLDFIRE) ++#define SYS_IRQS 256 ++#define NR_IRQS SYS_IRQS ++#elif defined(CONFIG_VME) || defined(CONFIG_SUN3) || defined(CONFIG_SUN3X) + #define NR_IRQS 200 + #elif defined(CONFIG_ATARI) || defined(CONFIG_MAC) + #define NR_IRQS 72 +--- /dev/null ++++ b/include/asm-m68k/m5485dma.h +@@ -0,0 +1,97 @@ ++/* ++ * m5485dma.h -- ColdFire 547x/548x DMA controller support. ++ */ ++#ifndef __MCF548X_DMA_H__ ++#define __MCF548X_DMA_H__ ++ ++ ++/* Register read/write macros */ ++#define MCF_DMA_DIPR (*(volatile u32*)(void*)(MCF_MBAR+0x008014)) ++#define MCF_DMA_DIMR (*(volatile u32*)(void*)(MCF_MBAR+0x008018)) ++#define MCF_DMA_IMCR (*(volatile u32*)(void*)(MCF_MBAR+0x00805C)) ++ ++/* Bit definitions and macros for MCF_DMA_DIPR */ ++#define MCF_DMA_DIPR_TASK0 (0x00000001) ++#define MCF_DMA_DIPR_TASK1 (0x00000002) ++#define MCF_DMA_DIPR_TASK2 (0x00000004) ++#define MCF_DMA_DIPR_TASK3 (0x00000008) ++#define MCF_DMA_DIPR_TASK4 (0x00000010) ++#define MCF_DMA_DIPR_TASK5 (0x00000020) ++#define MCF_DMA_DIPR_TASK6 (0x00000040) ++#define MCF_DMA_DIPR_TASK7 (0x00000080) ++#define MCF_DMA_DIPR_TASK8 (0x00000100) ++#define MCF_DMA_DIPR_TASK9 (0x00000200) ++#define MCF_DMA_DIPR_TASK10 (0x00000400) ++#define MCF_DMA_DIPR_TASK11 (0x00000800) ++#define MCF_DMA_DIPR_TASK12 (0x00001000) ++#define MCF_DMA_DIPR_TASK13 (0x00002000) ++#define MCF_DMA_DIPR_TASK14 (0x00004000) ++#define MCF_DMA_DIPR_TASK15 (0x00008000) ++ ++/* Bit definitions and macros for MCF_DMA_DIMR */ ++#define MCF_DMA_DIMR_TASK0 (0x00000001) ++#define MCF_DMA_DIMR_TASK1 (0x00000002) ++#define MCF_DMA_DIMR_TASK2 (0x00000004) ++#define MCF_DMA_DIMR_TASK3 (0x00000008) ++#define MCF_DMA_DIMR_TASK4 (0x00000010) ++#define MCF_DMA_DIMR_TASK5 (0x00000020) ++#define MCF_DMA_DIMR_TASK6 (0x00000040) ++#define MCF_DMA_DIMR_TASK7 (0x00000080) ++#define MCF_DMA_DIMR_TASK8 (0x00000100) ++#define MCF_DMA_DIMR_TASK9 (0x00000200) ++#define MCF_DMA_DIMR_TASK10 (0x00000400) ++#define MCF_DMA_DIMR_TASK11 (0x00000800) ++#define MCF_DMA_DIMR_TASK12 (0x00001000) ++#define MCF_DMA_DIMR_TASK13 (0x00002000) ++#define MCF_DMA_DIMR_TASK14 (0x00004000) ++#define MCF_DMA_DIMR_TASK15 (0x00008000) ++ ++/* Bit definitions and macros for MCF_DMA_IMCR */ ++#define MCF_DMA_IMCR_SRC16(x) (((x)&0x00000003)<<0) ++#define MCF_DMA_IMCR_SRC17(x) (((x)&0x00000003)<<2) ++#define MCF_DMA_IMCR_SRC18(x) (((x)&0x00000003)<<4) ++#define MCF_DMA_IMCR_SRC19(x) (((x)&0x00000003)<<6) ++#define MCF_DMA_IMCR_SRC20(x) (((x)&0x00000003)<<8) ++#define MCF_DMA_IMCR_SRC21(x) (((x)&0x00000003)<<10) ++#define MCF_DMA_IMCR_SRC22(x) (((x)&0x00000003)<<12) ++#define MCF_DMA_IMCR_SRC23(x) (((x)&0x00000003)<<14) ++#define MCF_DMA_IMCR_SRC24(x) (((x)&0x00000003)<<16) ++#define MCF_DMA_IMCR_SRC25(x) (((x)&0x00000003)<<18) ++#define MCF_DMA_IMCR_SRC26(x) (((x)&0x00000003)<<20) ++#define MCF_DMA_IMCR_SRC27(x) (((x)&0x00000003)<<22) ++#define MCF_DMA_IMCR_SRC28(x) (((x)&0x00000003)<<24) ++#define MCF_DMA_IMCR_SRC29(x) (((x)&0x00000003)<<26) ++#define MCF_DMA_IMCR_SRC30(x) (((x)&0x00000003)<<28) ++#define MCF_DMA_IMCR_SRC31(x) (((x)&0x00000003)<<30) ++#define MCF_DMA_IMCR_SRC16_FEC0RX (0x00000000) ++#define MCF_DMA_IMCR_SRC17_FEC0TX (0x00000000) ++#define MCF_DMA_IMCR_SRC18_FEC0RX (0x00000020) ++#define MCF_DMA_IMCR_SRC19_FEC0TX (0x00000080) ++#define MCF_DMA_IMCR_SRC20_FEC1RX (0x00000100) ++#define MCF_DMA_IMCR_SRC21_DREQ1 (0x00000000) ++#define MCF_DMA_IMCR_SRC21_FEC1TX (0x00000400) ++#define MCF_DMA_IMCR_SRC22_FEC0RX (0x00001000) ++#define MCF_DMA_IMCR_SRC23_FEC0TX (0x00004000) ++#define MCF_DMA_IMCR_SRC24_CTM0 (0x00010000) ++#define MCF_DMA_IMCR_SRC24_FEC1RX (0x00020000) ++#define MCF_DMA_IMCR_SRC25_CTM1 (0x00040000) ++#define MCF_DMA_IMCR_SRC25_FEC1TX (0x00080000) ++#define MCF_DMA_IMCR_SRC26_USBEP4 (0x00000000) ++#define MCF_DMA_IMCR_SRC26_CTM2 (0x00200000) ++#define MCF_DMA_IMCR_SRC27_USBEP5 (0x00000000) ++#define MCF_DMA_IMCR_SRC27_CTM3 (0x00800000) ++#define MCF_DMA_IMCR_SRC28_USBEP6 (0x00000000) ++#define MCF_DMA_IMCR_SRC28_CTM4 (0x01000000) ++#define MCF_DMA_IMCR_SRC28_DREQ1 (0x02000000) ++#define MCF_DMA_IMCR_SRC28_PSC2RX (0x03000000) ++#define MCF_DMA_IMCR_SRC29_DREQ1 (0x04000000) ++#define MCF_DMA_IMCR_SRC29_CTM5 (0x08000000) ++#define MCF_DMA_IMCR_SRC29_PSC2TX (0x0C000000) ++#define MCF_DMA_IMCR_SRC30_FEC1RX (0x00000000) ++#define MCF_DMA_IMCR_SRC30_CTM6 (0x10000000) ++#define MCF_DMA_IMCR_SRC30_PSC3RX (0x30000000) ++#define MCF_DMA_IMCR_SRC31_FEC1TX (0x00000000) ++#define MCF_DMA_IMCR_SRC31_CTM7 (0x80000000) ++#define MCF_DMA_IMCR_SRC31_PSC3TX (0xC0000000) ++ ++#endif /* __MCF548X_DMA_H__ */ +--- /dev/null ++++ b/include/asm-m68k/m5485dspi.h +@@ -0,0 +1,144 @@ ++/* ++ * File: mcf548x_dspi.h ++ * Purpose: Register and bit definitions for the MCF548X ++ * ++ * Notes: ++ * ++ */ ++ ++#ifndef _M5485DSPI_H_ ++#define _M5485DSPI_H_ ++ ++/* ++ * ++ * DMA Serial Peripheral Interface (DSPI) ++ * ++ */ ++ ++/* Register read/write macros */ ++#define MCF_DSPI_DMCR MCF_REG32(0x008A00) ++#define MCF_DSPI_DTCR MCF_REG32(0x008A08) ++#define MCF_DSPI_DCTAR0 MCF_REG32(0x008A0C) ++#define MCF_DSPI_DCTAR1 MCF_REG32(0x008A10) ++#define MCF_DSPI_DCTAR2 MCF_REG32(0x008A14) ++#define MCF_DSPI_DCTAR3 MCF_REG32(0x008A18) ++#define MCF_DSPI_DCTAR4 MCF_REG32(0x008A1C) ++#define MCF_DSPI_DCTAR5 MCF_REG32(0x008A20) ++#define MCF_DSPI_DCTAR6 MCF_REG32(0x008A24) ++#define MCF_DSPI_DCTAR7 MCF_REG32(0x008A28) ++#define MCF_DSPI_DCTARn(x) MCF_REG32(0x008A0C+(x*4)) ++#define MCF_DSPI_DSR MCF_REG32(0x008A2C) ++#define MCF_DSPI_DRSER MCF_REG32(0x008A30) ++#define MCF_DSPI_DTFR MCF_REG32(0x008A34) ++#define MCF_DSPI_DRFR MCF_REG32(0x008A38) ++#define MCF_DSPI_DTFDR0 MCF_REG32(0x008A3C) ++#define MCF_DSPI_DTFDR1 MCF_REG32(0x008A40) ++#define MCF_DSPI_DTFDR2 MCF_REG32(0x008A44) ++#define MCF_DSPI_DTFDR3 MCF_REG32(0x008A48) ++#define MCF_DSPI_DTFDRn(x) MCF_REG32(0x008A3C+(x*4)) ++#define MCF_DSPI_DRFDR0 MCF_REG32(0x008A7C) ++#define MCF_DSPI_DRFDR1 MCF_REG32(0x008A80) ++#define MCF_DSPI_DRFDR2 MCF_REG32(0x008A84) ++#define MCF_DSPI_DRFDR3 MCF_REG32(0x008A88) ++#define MCF_DSPI_DRFDRn(x) MCF_REG32(0x008A7C+(x*4)) ++ ++/* Bit definitions and macros for MCF_DSPI_DMCR */ ++#define MCF_DSPI_DMCR_HALT (0x00000001) ++#define MCF_DSPI_DMCR_SMPL_PT(x) (((x)&0x00000003)<<8) ++#define MCF_DSPI_DMCR_CRXF (0x00000400) ++#define MCF_DSPI_DMCR_CTXF (0x00000800) ++#define MCF_DSPI_DMCR_DRXF (0x00001000) ++#define MCF_DSPI_DMCR_DTXF (0x00002000) ++#define MCF_DSPI_DMCR_CSIS0 (0x00010000) ++#define MCF_DSPI_DMCR_CSIS2 (0x00040000) ++#define MCF_DSPI_DMCR_CSIS3 (0x00080000) ++#define MCF_DSPI_DMCR_CSIS5 (0x00200000) ++#define MCF_DSPI_DMCR_ROOE (0x01000000) ++#define MCF_DSPI_DMCR_PCSSE (0x02000000) ++#define MCF_DSPI_DMCR_MTFE (0x04000000) ++#define MCF_DSPI_DMCR_FRZ (0x08000000) ++#define MCF_DSPI_DMCR_DCONF(x) (((x)&0x00000003)<<28) ++#define MCF_DSPI_DMCR_CSCK (0x40000000) ++#define MCF_DSPI_DMCR_MSTR (0x80000000) ++ ++/* Bit definitions and macros for MCF_DSPI_DTCR */ ++#define MCF_DSPI_DTCR_SPI_TCNT(x) (((x)&0x0000FFFF)<<16) ++ ++/* Bit definitions and macros for MCF_DSPI_DCTARn */ ++#define MCF_DSPI_DCTAR_BR(x) (((x)&0x0000000F)<<0) ++#define MCF_DSPI_DCTAR_DT(x) (((x)&0x0000000F)<<4) ++#define MCF_DSPI_DCTAR_ASC(x) (((x)&0x0000000F)<<8) ++#define MCF_DSPI_DCTAR_CSSCK(x) (((x)&0x0000000F)<<12) ++#define MCF_DSPI_DCTAR_PBR(x) (((x)&0x00000003)<<16) ++#define MCF_DSPI_DCTAR_PDT(x) (((x)&0x00000003)<<18) ++#define MCF_DSPI_DCTAR_PASC(x) (((x)&0x00000003)<<20) ++#define MCF_DSPI_DCTAR_PCSSCK(x) (((x)&0x00000003)<<22) ++#define MCF_DSPI_DCTAR_LSBFE (0x01000000) ++#define MCF_DSPI_DCTAR_CPHA (0x02000000) ++#define MCF_DSPI_DCTAR_CPOL (0x04000000) ++/* #define MCF_DSPI_DCTAR_TRSZ(x) (((x)&0x0000000F)<<27) */ ++#define MCF_DSPI_DCTAR_FMSZ(x) (((x)&0x0000000F)<<27) ++#define MCF_DSPI_DCTAR_PCSSCK_1CLK (0x00000000) ++#define MCF_DSPI_DCTAR_PCSSCK_3CLK (0x00400000) ++#define MCF_DSPI_DCTAR_PCSSCK_5CLK (0x00800000) ++#define MCF_DSPI_DCTAR_PCSSCK_7CLK (0x00A00000) ++#define MCF_DSPI_DCTAR_PASC_1CLK (0x00000000) ++#define MCF_DSPI_DCTAR_PASC_3CLK (0x00100000) ++#define MCF_DSPI_DCTAR_PASC_5CLK (0x00200000) ++#define MCF_DSPI_DCTAR_PASC_7CLK (0x00300000) ++#define MCF_DSPI_DCTAR_PDT_1CLK (0x00000000) ++#define MCF_DSPI_DCTAR_PDT_3CLK (0x00040000) ++#define MCF_DSPI_DCTAR_PDT_5CLK (0x00080000) ++#define MCF_DSPI_DCTAR_PDT_7CLK (0x000A0000) ++#define MCF_DSPI_DCTAR_PBR_1CLK (0x00000000) ++#define MCF_DSPI_DCTAR_PBR_3CLK (0x00010000) ++#define MCF_DSPI_DCTAR_PBR_5CLK (0x00020000) ++#define MCF_DSPI_DCTAR_PBR_7CLK (0x00030000) ++ ++/* Bit definitions and macros for MCF_DSPI_DSR */ ++#define MCF_DSPI_DSR_RXPTR(x) (((x)&0x0000000F)<<0) ++#define MCF_DSPI_DSR_RXCTR(x) (((x)&0x0000000F)<<4) ++#define MCF_DSPI_DSR_TXPTR(x) (((x)&0x0000000F)<<8) ++#define MCF_DSPI_DSR_TXCTR(x) (((x)&0x0000000F)<<12) ++#define MCF_DSPI_DSR_RFDF (0x00020000) ++#define MCF_DSPI_DSR_RFOF (0x00080000) ++#define MCF_DSPI_DSR_TFFF (0x02000000) ++#define MCF_DSPI_DSR_TFUF (0x08000000) ++#define MCF_DSPI_DSR_EOQF (0x10000000) ++#define MCF_DSPI_DSR_TXRXS (0x40000000) ++#define MCF_DSPI_DSR_TCF (0x80000000) ++ ++/* Bit definitions and macros for MCF_DSPI_DRSER */ ++#define MCF_DSPI_DRSER_RFDFS (0x00010000) ++#define MCF_DSPI_DRSER_RFDFE (0x00020000) ++#define MCF_DSPI_DRSER_RFOFE (0x00080000) ++#define MCF_DSPI_DRSER_TFFFS (0x01000000) ++#define MCF_DSPI_DRSER_TFFFE (0x02000000) ++#define MCF_DSPI_DRSER_TFUFE (0x08000000) ++#define MCF_DSPI_DRSER_EOQFE (0x10000000) ++#define MCF_DSPI_DRSER_TCFE (0x80000000) ++ ++/* Bit definitions and macros for MCF_DSPI_DTFR */ ++#define MCF_DSPI_DTFR_TXDATA(x) (((x)&0x0000FFFF)<<0) ++#define MCF_DSPI_DTFR_CS0 (0x00010000) ++#define MCF_DSPI_DTFR_CS2 (0x00040000) ++#define MCF_DSPI_DTFR_CS3 (0x00080000) ++#define MCF_DSPI_DTFR_CS5 (0x00200000) ++#define MCF_DSPI_DTFR_CTCNT (0x04000000) ++#define MCF_DSPI_DTFR_EOQ (0x08000000) ++#define MCF_DSPI_DTFR_CTAS(x) (((x)&0x00000007)<<28) ++#define MCF_DSPI_DTFR_CONT (0x80000000) ++ ++/* Bit definitions and macros for MCF_DSPI_DRFR */ ++#define MCF_DSPI_DRFR_RXDATA(x) (((x)&0x0000FFFF)<<0) ++ ++/* Bit definitions and macros for MCF_DSPI_DTFDRn */ ++#define MCF_DSPI_DTFDRn_TXDATA(x) (((x)&0x0000FFFF)<<0) ++#define MCF_DSPI_DTFDRn_TXCMD(x) (((x)&0x0000FFFF)<<16) ++ ++/* Bit definitions and macros for MCF_DSPI_DRFDRn */ ++#define MCF_DSPI_DRFDRn_RXDATA(x) (((x)&0x0000FFFF)<<0) ++ ++/********************************************************************/ ++ ++#endif /* _M5485DSPI_H_ */ +--- /dev/null ++++ b/include/asm-m68k/m5485gpio.h +@@ -0,0 +1,694 @@ ++/* ++ * File: mcf548x_gpio.h ++ * Purpose: Register and bit definitions for the MCF548X ++ * ++ * Notes: ++ * ++ */ ++ ++#ifndef _M5485GPIO_H_ ++#define _M5485GPIO_H_ ++ ++/********************************************************************* ++* ++* General Purpose I/O (GPIO) ++* ++*********************************************************************/ ++ ++/* Register read/write macros */ ++#define MCF_GPIO_PODR_FBCTL MCF_REG08(0x000A00) ++#define MCF_GPIO_PODR_FBCS MCF_REG08(0x000A01) ++#define MCF_GPIO_PODR_DMA MCF_REG08(0x000A02) ++#define MCF_GPIO_PODR_FEC0H MCF_REG08(0x000A04) ++#define MCF_GPIO_PODR_FEC0L MCF_REG08(0x000A05) ++#define MCF_GPIO_PODR_FEC1H MCF_REG08(0x000A06) ++#define MCF_GPIO_PODR_FEC1L MCF_REG08(0x000A07) ++#define MCF_GPIO_PODR_FECI2C MCF_REG08(0x000A08) ++#define MCF_GPIO_PODR_PCIBG MCF_REG08(0x000A09) ++#define MCF_GPIO_PODR_PCIBR MCF_REG08(0x000A0A) ++#define MCF_GPIO_PODR_PSC3PSC2 MCF_REG08(0x000A0C) ++#define MCF_GPIO_PODR_PSC1PSC0 MCF_REG08(0x000A0D) ++#define MCF_GPIO_PODR_DSPI MCF_REG08(0x000A0E) ++#define MCF_GPIO_PDDR_FBCTL MCF_REG08(0x000A10) ++#define MCF_GPIO_PDDR_FBCS MCF_REG08(0x000A11) ++#define MCF_GPIO_PDDR_DMA MCF_REG08(0x000A12) ++#define MCF_GPIO_PDDR_FEC0H MCF_REG08(0x000A14) ++#define MCF_GPIO_PDDR_FEC0L MCF_REG08(0x000A15) ++#define MCF_GPIO_PDDR_FEC1H MCF_REG08(0x000A16) ++#define MCF_GPIO_PDDR_FEC1L MCF_REG08(0x000A17) ++#define MCF_GPIO_PDDR_FECI2C MCF_REG08(0x000A18) ++#define MCF_GPIO_PDDR_PCIBG MCF_REG08(0x000A19) ++#define MCF_GPIO_PDDR_PCIBR MCF_REG08(0x000A1A) ++#define MCF_GPIO_PDDR_PSC3PSC2 MCF_REG08(0x000A1C) ++#define MCF_GPIO_PDDR_PSC1PSC0 MCF_REG08(0x000A1D) ++#define MCF_GPIO_PDDR_DSPI MCF_REG08(0x000A1E) ++#define MCF_GPIO_PPDSDR_FBCTL MCF_REG08(0x000A20) ++#define MCF_GPIO_PPDSDR_FBCS MCF_REG08(0x000A21) ++#define MCF_GPIO_PPDSDR_DMA MCF_REG08(0x000A22) ++#define MCF_GPIO_PPDSDR_FEC0H MCF_REG08(0x000A24) ++#define MCF_GPIO_PPDSDR_FEC0L MCF_REG08(0x000A25) ++#define MCF_GPIO_PPDSDR_FEC1H MCF_REG08(0x000A26) ++#define MCF_GPIO_PPDSDR_FEC1L MCF_REG08(0x000A27) ++#define MCF_GPIO_PPDSDR_FECI2C MCF_REG08(0x000A28) ++#define MCF_GPIO_PPDSDR_PCIBG MCF_REG08(0x000A29) ++#define MCF_GPIO_PPDSDR_PCIBR MCF_REG08(0x000A2A) ++#define MCF_GPIO_PPDSDR_PSC3PSC2 MCF_REG08(0x000A2C) ++#define MCF_GPIO_PPDSDR_PSC1PSC0 MCF_REG08(0x000A2D) ++#define MCF_GPIO_PPDSDR_DSPI MCF_REG08(0x000A2E) ++#define MCF_GPIO_PCLRR_FBCTL MCF_REG08(0x000A30) ++#define MCF_GPIO_PCLRR_FBCS MCF_REG08(0x000A31) ++#define MCF_GPIO_PCLRR_DMA MCF_REG08(0x000A32) ++#define MCF_GPIO_PCLRR_FEC0H MCF_REG08(0x000A34) ++#define MCF_GPIO_PCLRR_FEC0L MCF_REG08(0x000A35) ++#define MCF_GPIO_PCLRR_FEC1H MCF_REG08(0x000A36) ++#define MCF_GPIO_PCLRR_FEC1L MCF_REG08(0x000A37) ++#define MCF_GPIO_PCLRR_FECI2C MCF_REG08(0x000A38) ++#define MCF_GPIO_PCLRR_PCIBG MCF_REG08(0x000A39) ++#define MCF_GPIO_PCLRR_PCIBR MCF_REG08(0x000A3A) ++#define MCF_GPIO_PCLRR_PSC3PSC2 MCF_REG08(0x000A3C) ++#define MCF_GPIO_PCLRR_PSC1PSC0 MCF_REG08(0x000A3D) ++#define MCF_GPIO_PCLRR_DSPI MCF_REG08(0x000A3E) ++#define MCF_GPIO_PAR_FBCTL MCF_REG16(0x000A40) ++#define MCF_GPIO_PAR_FBCS MCF_REG08(0x000A42) ++#define MCF_GPIO_PAR_DMA MCF_REG08(0x000A43) ++#define MCF_GPIO_PAR_FECI2CIRQ MCF_REG16(0x000A44) ++#define MCF_GPIO_PAR_PCIBG MCF_REG16(0x000A48) ++#define MCF_GPIO_PAR_PCIBR MCF_REG16(0x000A4A) ++#define MCF_GPIO_PAR_PSC3 MCF_REG08(0x000A4C) ++#define MCF_GPIO_PAR_PSC2 MCF_REG08(0x000A4D) ++#define MCF_GPIO_PAR_PSC1 MCF_REG08(0x000A4E) ++#define MCF_GPIO_PAR_PSC0 MCF_REG08(0x000A4F) ++#define MCF_GPIO_PAR_DSPI MCF_REG16(0x000A50) ++#define MCF_GPIO_PAR_TIMER MCF_REG08(0x000A52) ++ ++/* Bit definitions and macros for MCF_GPIO_PODR_FBCTL */ ++#define MCF_GPIO_PODR_FBCTL_PODRFBCTL0 (0x01) ++#define MCF_GPIO_PODR_FBCTL_PODRFBCTL1 (0x02) ++#define MCF_GPIO_PODR_FBCTL_PODRFBCTL2 (0x04) ++#define MCF_GPIO_PODR_FBCTL_PODRFBCTL3 (0x08) ++#define MCF_GPIO_PODR_FBCTL_PODRFBCTL4 (0x10) ++#define MCF_GPIO_PODR_FBCTL_PODRFBCTL5 (0x20) ++#define MCF_GPIO_PODR_FBCTL_PODRFBCTL6 (0x40) ++#define MCF_GPIO_PODR_FBCTL_PODRFBCTL7 (0x80) ++ ++/* Bit definitions and macros for MCF_GPIO_PODR_FBCS */ ++#define MCF_GPIO_PODR_FBCS_PODRFBCS1 (0x02) ++#define MCF_GPIO_PODR_FBCS_PODRFBCS2 (0x04) ++#define MCF_GPIO_PODR_FBCS_PODRFBCS3 (0x08) ++#define MCF_GPIO_PODR_FBCS_PODRFBCS4 (0x10) ++#define MCF_GPIO_PODR_FBCS_PODRFBCS5 (0x20) ++ ++/* Bit definitions and macros for MCF_GPIO_PODR_DMA */ ++#define MCF_GPIO_PODR_DMA_PODRDMA0 (0x01) ++#define MCF_GPIO_PODR_DMA_PODRDMA1 (0x02) ++#define MCF_GPIO_PODR_DMA_PODRDMA2 (0x04) ++#define MCF_GPIO_PODR_DMA_PODRDMA3 (0x08) ++ ++/* Bit definitions and macros for MCF_GPIO_PODR_FEC0H */ ++#define MCF_GPIO_PODR_FEC0H_PODRFEC0H0 (0x01) ++#define MCF_GPIO_PODR_FEC0H_PODRFEC0H1 (0x02) ++#define MCF_GPIO_PODR_FEC0H_PODRFEC0H2 (0x04) ++#define MCF_GPIO_PODR_FEC0H_PODRFEC0H3 (0x08) ++#define MCF_GPIO_PODR_FEC0H_PODRFEC0H4 (0x10) ++#define MCF_GPIO_PODR_FEC0H_PODRFEC0H5 (0x20) ++#define MCF_GPIO_PODR_FEC0H_PODRFEC0H6 (0x40) ++#define MCF_GPIO_PODR_FEC0H_PODRFEC0H7 (0x80) ++ ++/* Bit definitions and macros for MCF_GPIO_PODR_FEC0L */ ++#define MCF_GPIO_PODR_FEC0L_PODRFEC0L0 (0x01) ++#define MCF_GPIO_PODR_FEC0L_PODRFEC0L1 (0x02) ++#define MCF_GPIO_PODR_FEC0L_PODRFEC0L2 (0x04) ++#define MCF_GPIO_PODR_FEC0L_PODRFEC0L3 (0x08) ++#define MCF_GPIO_PODR_FEC0L_PODRFEC0L4 (0x10) ++#define MCF_GPIO_PODR_FEC0L_PODRFEC0L5 (0x20) ++#define MCF_GPIO_PODR_FEC0L_PODRFEC0L6 (0x40) ++#define MCF_GPIO_PODR_FEC0L_PODRFEC0L7 (0x80) ++ ++/* Bit definitions and macros for MCF_GPIO_PODR_FEC1H */ ++#define MCF_GPIO_PODR_FEC1H_PODRFEC1H0 (0x01) ++#define MCF_GPIO_PODR_FEC1H_PODRFEC1H1 (0x02) ++#define MCF_GPIO_PODR_FEC1H_PODRFEC1H2 (0x04) ++#define MCF_GPIO_PODR_FEC1H_PODRFEC1H3 (0x08) ++#define MCF_GPIO_PODR_FEC1H_PODRFEC1H4 (0x10) ++#define MCF_GPIO_PODR_FEC1H_PODRFEC1H5 (0x20) ++#define MCF_GPIO_PODR_FEC1H_PODRFEC1H6 (0x40) ++#define MCF_GPIO_PODR_FEC1H_PODRFEC1H7 (0x80) ++ ++/* Bit definitions and macros for MCF_GPIO_PODR_FEC1L */ ++#define MCF_GPIO_PODR_FEC1L_PODRFEC1L0 (0x01) ++#define MCF_GPIO_PODR_FEC1L_PODRFEC1L1 (0x02) ++#define MCF_GPIO_PODR_FEC1L_PODRFEC1L2 (0x04) ++#define MCF_GPIO_PODR_FEC1L_PODRFEC1L3 (0x08) ++#define MCF_GPIO_PODR_FEC1L_PODRFEC1L4 (0x10) ++#define MCF_GPIO_PODR_FEC1L_PODRFEC1L5 (0x20) ++#define MCF_GPIO_PODR_FEC1L_PODRFEC1L6 (0x40) ++#define MCF_GPIO_PODR_FEC1L_PODRFEC1L7 (0x80) ++ ++/* Bit definitions and macros for MCF_GPIO_PODR_FECI2C */ ++#define MCF_GPIO_PODR_FECI2C_PODRFECI2C0 (0x01) ++#define MCF_GPIO_PODR_FECI2C_PODRFECI2C1 (0x02) ++#define MCF_GPIO_PODR_FECI2C_PODRFECI2C2 (0x04) ++#define MCF_GPIO_PODR_FECI2C_PODRFECI2C3 (0x08) ++ ++/* Bit definitions and macros for MCF_GPIO_PODR_PCIBG */ ++#define MCF_GPIO_PODR_PCIBG_PODRPCIBG0 (0x01) ++#define MCF_GPIO_PODR_PCIBG_PODRPCIBG1 (0x02) ++#define MCF_GPIO_PODR_PCIBG_PODRPCIBG2 (0x04) ++#define MCF_GPIO_PODR_PCIBG_PODRPCIBG3 (0x08) ++#define MCF_GPIO_PODR_PCIBG_PODRPCIBG4 (0x10) ++ ++/* Bit definitions and macros for MCF_GPIO_PODR_PCIBR */ ++#define MCF_GPIO_PODR_PCIBR_PODRPCIBR0 (0x01) ++#define MCF_GPIO_PODR_PCIBR_PODRPCIBR1 (0x02) ++#define MCF_GPIO_PODR_PCIBR_PODRPCIBR2 (0x04) ++#define MCF_GPIO_PODR_PCIBR_PODRPCIBR3 (0x08) ++#define MCF_GPIO_PODR_PCIBR_PODRPCIBR4 (0x10) ++ ++/* Bit definitions and macros for MCF_GPIO_PODR_PSC3PSC2 */ ++#define MCF_GPIO_PODR_PSC3PSC2_PODRPSC3PSC20 (0x01) ++#define MCF_GPIO_PODR_PSC3PSC2_PODRPSC3PSC21 (0x02) ++#define MCF_GPIO_PODR_PSC3PSC2_PODRPSC3PSC22 (0x04) ++#define MCF_GPIO_PODR_PSC3PSC2_PODRPSC3PSC23 (0x08) ++#define MCF_GPIO_PODR_PSC3PSC2_PODRPSC3PSC24 (0x10) ++#define MCF_GPIO_PODR_PSC3PSC2_PODRPSC3PSC25 (0x20) ++#define MCF_GPIO_PODR_PSC3PSC2_PODRPSC3PSC26 (0x40) ++#define MCF_GPIO_PODR_PSC3PSC2_PODRPSC3PSC27 (0x80) ++ ++/* Bit definitions and macros for MCF_GPIO_PODR_PSC1PSC0 */ ++#define MCF_GPIO_PODR_PSC1PSC0_PODRPSC1PSC00 (0x01) ++#define MCF_GPIO_PODR_PSC1PSC0_PODRPSC1PSC01 (0x02) ++#define MCF_GPIO_PODR_PSC1PSC0_PODRPSC1PSC02 (0x04) ++#define MCF_GPIO_PODR_PSC1PSC0_PODRPSC1PSC03 (0x08) ++#define MCF_GPIO_PODR_PSC1PSC0_PODRPSC1PSC04 (0x10) ++#define MCF_GPIO_PODR_PSC1PSC0_PODRPSC1PSC05 (0x20) ++#define MCF_GPIO_PODR_PSC1PSC0_PODRPSC1PSC06 (0x40) ++#define MCF_GPIO_PODR_PSC1PSC0_PODRPSC1PSC07 (0x80) ++ ++/* Bit definitions and macros for MCF_GPIO_PODR_DSPI */ ++#define MCF_GPIO_PODR_DSPI_PODRDSPI0 (0x01) ++#define MCF_GPIO_PODR_DSPI_PODRDSPI1 (0x02) ++#define MCF_GPIO_PODR_DSPI_PODRDSPI2 (0x04) ++#define MCF_GPIO_PODR_DSPI_PODRDSPI3 (0x08) ++#define MCF_GPIO_PODR_DSPI_PODRDSPI4 (0x10) ++#define MCF_GPIO_PODR_DSPI_PODRDSPI5 (0x20) ++#define MCF_GPIO_PODR_DSPI_PODRDSPI6 (0x40) ++ ++/* Bit definitions and macros for MCF_GPIO_PDDR_FBCTL */ ++#define MCF_GPIO_PDDR_FBCTL_PDDRFBCTL0 (0x01) ++#define MCF_GPIO_PDDR_FBCTL_PDDRFBCTL1 (0x02) ++#define MCF_GPIO_PDDR_FBCTL_PDDRFBCTL2 (0x04) ++#define MCF_GPIO_PDDR_FBCTL_PDDRFBCTL3 (0x08) ++#define MCF_GPIO_PDDR_FBCTL_PDDRFBCTL4 (0x10) ++#define MCF_GPIO_PDDR_FBCTL_PDDRFBCTL5 (0x20) ++#define MCF_GPIO_PDDR_FBCTL_PDDRFBCTL6 (0x40) ++#define MCF_GPIO_PDDR_FBCTL_PDDRFBCTL7 (0x80) ++ ++/* Bit definitions and macros for MCF_GPIO_PDDR_FBCS */ ++#define MCF_GPIO_PDDR_FBCS_PDDRFBCS1 (0x02) ++#define MCF_GPIO_PDDR_FBCS_PDDRFBCS2 (0x04) ++#define MCF_GPIO_PDDR_FBCS_PDDRFBCS3 (0x08) ++#define MCF_GPIO_PDDR_FBCS_PDDRFBCS4 (0x10) ++#define MCF_GPIO_PDDR_FBCS_PDDRFBCS5 (0x20) ++ ++/* Bit definitions and macros for MCF_GPIO_PDDR_DMA */ ++#define MCF_GPIO_PDDR_DMA_PDDRDMA0 (0x01) ++#define MCF_GPIO_PDDR_DMA_PDDRDMA1 (0x02) ++#define MCF_GPIO_PDDR_DMA_PDDRDMA2 (0x04) ++#define MCF_GPIO_PDDR_DMA_PDDRDMA3 (0x08) ++ ++/* Bit definitions and macros for MCF_GPIO_PDDR_FEC0H */ ++#define MCF_GPIO_PDDR_FEC0H_PDDRFEC0H0 (0x01) ++#define MCF_GPIO_PDDR_FEC0H_PDDRFEC0H1 (0x02) ++#define MCF_GPIO_PDDR_FEC0H_PDDRFEC0H2 (0x04) ++#define MCF_GPIO_PDDR_FEC0H_PDDRFEC0H3 (0x08) ++#define MCF_GPIO_PDDR_FEC0H_PDDRFEC0H4 (0x10) ++#define MCF_GPIO_PDDR_FEC0H_PDDRFEC0H5 (0x20) ++#define MCF_GPIO_PDDR_FEC0H_PDDRFEC0H6 (0x40) ++#define MCF_GPIO_PDDR_FEC0H_PDDRFEC0H7 (0x80) ++ ++/* Bit definitions and macros for MCF_GPIO_PDDR_FEC0L */ ++#define MCF_GPIO_PDDR_FEC0L_PDDRFEC0L0 (0x01) ++#define MCF_GPIO_PDDR_FEC0L_PDDRFEC0L1 (0x02) ++#define MCF_GPIO_PDDR_FEC0L_PDDRFEC0L2 (0x04) ++#define MCF_GPIO_PDDR_FEC0L_PDDRFEC0L3 (0x08) ++#define MCF_GPIO_PDDR_FEC0L_PDDRFEC0L4 (0x10) ++#define MCF_GPIO_PDDR_FEC0L_PDDRFEC0L5 (0x20) ++#define MCF_GPIO_PDDR_FEC0L_PDDRFEC0L6 (0x40) ++#define MCF_GPIO_PDDR_FEC0L_PDDRFEC0L7 (0x80) ++ ++/* Bit definitions and macros for MCF_GPIO_PDDR_FEC1H */ ++#define MCF_GPIO_PDDR_FEC1H_PDDRFEC1H0 (0x01) ++#define MCF_GPIO_PDDR_FEC1H_PDDRFEC1H1 (0x02) ++#define MCF_GPIO_PDDR_FEC1H_PDDRFEC1H2 (0x04) ++#define MCF_GPIO_PDDR_FEC1H_PDDRFEC1H3 (0x08) ++#define MCF_GPIO_PDDR_FEC1H_PDDRFEC1H4 (0x10) ++#define MCF_GPIO_PDDR_FEC1H_PDDRFEC1H5 (0x20) ++#define MCF_GPIO_PDDR_FEC1H_PDDRFEC1H6 (0x40) ++#define MCF_GPIO_PDDR_FEC1H_PDDRFEC1H7 (0x80) ++ ++/* Bit definitions and macros for MCF_GPIO_PDDR_FEC1L */ ++#define MCF_GPIO_PDDR_FEC1L_PDDRFEC1L0 (0x01) ++#define MCF_GPIO_PDDR_FEC1L_PDDRFEC1L1 (0x02) ++#define MCF_GPIO_PDDR_FEC1L_PDDRFEC1L2 (0x04) ++#define MCF_GPIO_PDDR_FEC1L_PDDRFEC1L3 (0x08) ++#define MCF_GPIO_PDDR_FEC1L_PDDRFEC1L4 (0x10) ++#define MCF_GPIO_PDDR_FEC1L_PDDRFEC1L5 (0x20) ++#define MCF_GPIO_PDDR_FEC1L_PDDRFEC1L6 (0x40) ++#define MCF_GPIO_PDDR_FEC1L_PDDRFEC1L7 (0x80) ++ ++/* Bit definitions and macros for MCF_GPIO_PDDR_FECI2C */ ++#define MCF_GPIO_PDDR_FECI2C_PDDRFECI2C0 (0x01) ++#define MCF_GPIO_PDDR_FECI2C_PDDRFECI2C1 (0x02) ++#define MCF_GPIO_PDDR_FECI2C_PDDRFECI2C2 (0x04) ++#define MCF_GPIO_PDDR_FECI2C_PDDRFECI2C3 (0x08) ++ ++/* Bit definitions and macros for MCF_GPIO_PDDR_PCIBG */ ++#define MCF_GPIO_PDDR_PCIBG_PDDRPCIBG0 (0x01) ++#define MCF_GPIO_PDDR_PCIBG_PDDRPCIBG1 (0x02) ++#define MCF_GPIO_PDDR_PCIBG_PDDRPCIBG2 (0x04) ++#define MCF_GPIO_PDDR_PCIBG_PDDRPCIBG3 (0x08) ++#define MCF_GPIO_PDDR_PCIBG_PDDRPCIBG4 (0x10) ++ ++/* Bit definitions and macros for MCF_GPIO_PDDR_PCIBR */ ++#define MCF_GPIO_PDDR_PCIBR_PDDRPCIBR0 (0x01) ++#define MCF_GPIO_PDDR_PCIBR_PDDRPCIBR1 (0x02) ++#define MCF_GPIO_PDDR_PCIBR_PDDRPCIBR2 (0x04) ++#define MCF_GPIO_PDDR_PCIBR_PDDRPCIBR3 (0x08) ++#define MCF_GPIO_PDDR_PCIBR_PDDRPCIBR4 (0x10) ++ ++/* Bit definitions and macros for MCF_GPIO_PDDR_PSC3PSC2 */ ++#define MCF_GPIO_PDDR_PSC3PSC2_PDDRPSC3PSC20 (0x01) ++#define MCF_GPIO_PDDR_PSC3PSC2_PDDRPSC3PSC21 (0x02) ++#define MCF_GPIO_PDDR_PSC3PSC2_PDDRPSC3PSC22 (0x04) ++#define MCF_GPIO_PDDR_PSC3PSC2_PDDRPSC3PSC23 (0x08) ++#define MCF_GPIO_PDDR_PSC3PSC2_PDDRPSC3PSC24 (0x10) ++#define MCF_GPIO_PDDR_PSC3PSC2_PDDRPSC3PSC25 (0x20) ++#define MCF_GPIO_PDDR_PSC3PSC2_PDDRPSC3PSC26 (0x40) ++#define MCF_GPIO_PDDR_PSC3PSC2_PDDRPSC3PSC27 (0x80) ++ ++/* Bit definitions and macros for MCF_GPIO_PDDR_PSC1PSC0 */ ++#define MCF_GPIO_PDDR_PSC1PSC0_PDDRPSC1PSC00 (0x01) ++#define MCF_GPIO_PDDR_PSC1PSC0_PDDRPSC1PSC01 (0x02) ++#define MCF_GPIO_PDDR_PSC1PSC0_PDDRPSC1PSC02 (0x04) ++#define MCF_GPIO_PDDR_PSC1PSC0_PDDRPSC1PSC03 (0x08) ++#define MCF_GPIO_PDDR_PSC1PSC0_PDDRPSC1PSC04 (0x10) ++#define MCF_GPIO_PDDR_PSC1PSC0_PDDRPSC1PSC05 (0x20) ++#define MCF_GPIO_PDDR_PSC1PSC0_PDDRPSC1PSC06 (0x40) ++#define MCF_GPIO_PDDR_PSC1PSC0_PDDRPSC1PSC07 (0x80) ++ ++/* Bit definitions and macros for MCF_GPIO_PDDR_DSPI */ ++#define MCF_GPIO_PDDR_DSPI_PDDRDSPI0 (0x01) ++#define MCF_GPIO_PDDR_DSPI_PDDRDSPI1 (0x02) ++#define MCF_GPIO_PDDR_DSPI_PDDRDSPI2 (0x04) ++#define MCF_GPIO_PDDR_DSPI_PDDRDSPI3 (0x08) ++#define MCF_GPIO_PDDR_DSPI_PDDRDSPI4 (0x10) ++#define MCF_GPIO_PDDR_DSPI_PDDRDSPI5 (0x20) ++#define MCF_GPIO_PDDR_DSPI_PDDRDSPI6 (0x40) ++ ++/* Bit definitions and macros for MCF_GPIO_PPDSDR_FBCTL */ ++#define MCF_GPIO_PPDSDR_FBCTL_PPDSDRFBCTL0 (0x01) ++#define MCF_GPIO_PPDSDR_FBCTL_PPDSDRFBCTL1 (0x02) ++#define MCF_GPIO_PPDSDR_FBCTL_PPDSDRFBCTL2 (0x04) ++#define MCF_GPIO_PPDSDR_FBCTL_PPDSDRFBCTL3 (0x08) ++#define MCF_GPIO_PPDSDR_FBCTL_PPDSDRFBCTL4 (0x10) ++#define MCF_GPIO_PPDSDR_FBCTL_PPDSDRFBCTL5 (0x20) ++#define MCF_GPIO_PPDSDR_FBCTL_PPDSDRFBCTL6 (0x40) ++#define MCF_GPIO_PPDSDR_FBCTL_PPDSDRFBCTL7 (0x80) ++ ++/* Bit definitions and macros for MCF_GPIO_PPDSDR_FBCS */ ++#define MCF_GPIO_PPDSDR_FBCS_PPDSDRFBCS1 (0x02) ++#define MCF_GPIO_PPDSDR_FBCS_PPDSDRFBCS2 (0x04) ++#define MCF_GPIO_PPDSDR_FBCS_PPDSDRFBCS3 (0x08) ++#define MCF_GPIO_PPDSDR_FBCS_PPDSDRFBCS4 (0x10) ++#define MCF_GPIO_PPDSDR_FBCS_PPDSDRFBCS5 (0x20) ++ ++/* Bit definitions and macros for MCF_GPIO_PPDSDR_DMA */ ++#define MCF_GPIO_PPDSDR_DMA_PPDSDRDMA0 (0x01) ++#define MCF_GPIO_PPDSDR_DMA_PPDSDRDMA1 (0x02) ++#define MCF_GPIO_PPDSDR_DMA_PPDSDRDMA2 (0x04) ++#define MCF_GPIO_PPDSDR_DMA_PPDSDRDMA3 (0x08) ++ ++/* Bit definitions and macros for MCF_GPIO_PPDSDR_FEC0H */ ++#define MCF_GPIO_PPDSDR_FEC0H_PPDSDRFEC0H0 (0x01) ++#define MCF_GPIO_PPDSDR_FEC0H_PPDSDRFEC0H1 (0x02) ++#define MCF_GPIO_PPDSDR_FEC0H_PPDSDRFEC0H2 (0x04) ++#define MCF_GPIO_PPDSDR_FEC0H_PPDSDRFEC0H3 (0x08) ++#define MCF_GPIO_PPDSDR_FEC0H_PPDSDRFEC0H4 (0x10) ++#define MCF_GPIO_PPDSDR_FEC0H_PPDSDRFEC0H5 (0x20) ++#define MCF_GPIO_PPDSDR_FEC0H_PPDSDRFEC0H6 (0x40) ++#define MCF_GPIO_PPDSDR_FEC0H_PPDSDRFEC0H7 (0x80) ++ ++/* Bit definitions and macros for MCF_GPIO_PPDSDR_FEC0L */ ++#define MCF_GPIO_PPDSDR_FEC0L_PPDSDRFEC0L0 (0x01) ++#define MCF_GPIO_PPDSDR_FEC0L_PPDSDRFEC0L1 (0x02) ++#define MCF_GPIO_PPDSDR_FEC0L_PPDSDRFEC0L2 (0x04) ++#define MCF_GPIO_PPDSDR_FEC0L_PPDSDRFEC0L3 (0x08) ++#define MCF_GPIO_PPDSDR_FEC0L_PPDSDRFEC0L4 (0x10) ++#define MCF_GPIO_PPDSDR_FEC0L_PPDSDRFEC0L5 (0x20) ++#define MCF_GPIO_PPDSDR_FEC0L_PPDSDRFEC0L6 (0x40) ++#define MCF_GPIO_PPDSDR_FEC0L_PPDSDRFEC0L7 (0x80) ++ ++/* Bit definitions and macros for MCF_GPIO_PPDSDR_FEC1H */ ++#define MCF_GPIO_PPDSDR_FEC1H_PPDSDRFEC1H0 (0x01) ++#define MCF_GPIO_PPDSDR_FEC1H_PPDSDRFEC1H1 (0x02) ++#define MCF_GPIO_PPDSDR_FEC1H_PPDSDRFEC1H2 (0x04) ++#define MCF_GPIO_PPDSDR_FEC1H_PPDSDRFEC1H3 (0x08) ++#define MCF_GPIO_PPDSDR_FEC1H_PPDSDRFEC1H4 (0x10) ++#define MCF_GPIO_PPDSDR_FEC1H_PPDSDRFEC1H5 (0x20) ++#define MCF_GPIO_PPDSDR_FEC1H_PPDSDRFEC1H6 (0x40) ++#define MCF_GPIO_PPDSDR_FEC1H_PPDSDRFEC1H7 (0x80) ++ ++/* Bit definitions and macros for MCF_GPIO_PPDSDR_FEC1L */ ++#define MCF_GPIO_PPDSDR_FEC1L_PPDSDRFEC1L0 (0x01) ++#define MCF_GPIO_PPDSDR_FEC1L_PPDSDRFEC1L1 (0x02) ++#define MCF_GPIO_PPDSDR_FEC1L_PPDSDRFEC1L2 (0x04) ++#define MCF_GPIO_PPDSDR_FEC1L_PPDSDRFEC1L3 (0x08) ++#define MCF_GPIO_PPDSDR_FEC1L_PPDSDRFEC1L4 (0x10) ++#define MCF_GPIO_PPDSDR_FEC1L_PPDSDRFEC1L5 (0x20) ++#define MCF_GPIO_PPDSDR_FEC1L_PPDSDRFEC1L6 (0x40) ++#define MCF_GPIO_PPDSDR_FEC1L_PPDSDRFEC1L7 (0x80) ++ ++/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECI2C */ ++#define MCF_GPIO_PPDSDR_FECI2C_PPDSDRFECI2C0 (0x01) ++#define MCF_GPIO_PPDSDR_FECI2C_PPDSDRFECI2C1 (0x02) ++#define MCF_GPIO_PPDSDR_FECI2C_PPDSDRFECI2C2 (0x04) ++#define MCF_GPIO_PPDSDR_FECI2C_PPDSDRFECI2C3 (0x08) ++ ++/* Bit definitions and macros for MCF_GPIO_PPDSDR_PCIBG */ ++#define MCF_GPIO_PPDSDR_PCIBG_PPDSDRPCIBG0 (0x01) ++#define MCF_GPIO_PPDSDR_PCIBG_PPDSDRPCIBG1 (0x02) ++#define MCF_GPIO_PPDSDR_PCIBG_PPDSDRPCIBG2 (0x04) ++#define MCF_GPIO_PPDSDR_PCIBG_PPDSDRPCIBG3 (0x08) ++#define MCF_GPIO_PPDSDR_PCIBG_PPDSDRPCIBG4 (0x10) ++ ++/* Bit definitions and macros for MCF_GPIO_PPDSDR_PCIBR */ ++#define MCF_GPIO_PPDSDR_PCIBR_PPDSDRPCIBR0 (0x01) ++#define MCF_GPIO_PPDSDR_PCIBR_PPDSDRPCIBR1 (0x02) ++#define MCF_GPIO_PPDSDR_PCIBR_PPDSDRPCIBR2 (0x04) ++#define MCF_GPIO_PPDSDR_PCIBR_PPDSDRPCIBR3 (0x08) ++#define MCF_GPIO_PPDSDR_PCIBR_PPDSDRPCIBR4 (0x10) ++ ++/* Bit definitions and macros for MCF_GPIO_PPDSDR_PSC3PSC2 */ ++#define MCF_GPIO_PPDSDR_PSC3PSC2_PPDSDRPSC3PSC20 (0x01) ++#define MCF_GPIO_PPDSDR_PSC3PSC2_PPDSDRPSC3PSC21 (0x02) ++#define MCF_GPIO_PPDSDR_PSC3PSC2_PPDSDRPSC3PSC22 (0x04) ++#define MCF_GPIO_PPDSDR_PSC3PSC2_PPDSDRPSC3PSC23 (0x08) ++#define MCF_GPIO_PPDSDR_PSC3PSC2_PDDRPSC3PSC24 (0x10) ++#define MCF_GPIO_PPDSDR_PSC3PSC2_PDDRPSC3PSC25 (0x20) ++#define MCF_GPIO_PPDSDR_PSC3PSC2_PPDSDRPSC3PSC26 (0x40) ++#define MCF_GPIO_PPDSDR_PSC3PSC2_PPDSDRPSC3PSC27 (0x80) ++ ++/* Bit definitions and macros for MCF_GPIO_PPDSDR_PSC1PSC0 */ ++#define MCF_GPIO_PPDSDR_PSC1PSC0_PPDSDRPSC1PSC00 (0x01) ++#define MCF_GPIO_PPDSDR_PSC1PSC0_PDDRPSC1PSC01 (0x02) ++#define MCF_GPIO_PPDSDR_PSC1PSC0_PPDSDRPSC1PSC02 (0x04) ++#define MCF_GPIO_PPDSDR_PSC1PSC0_PDDRPSC1PSC03 (0x08) ++#define MCF_GPIO_PPDSDR_PSC1PSC0_PPDSDRPSC1PSC04 (0x10) ++#define MCF_GPIO_PPDSDR_PSC1PSC0_PPDSDRPSC1PSC05 (0x20) ++#define MCF_GPIO_PPDSDR_PSC1PSC0_PPDSDRPSC1PSC06 (0x40) ++#define MCF_GPIO_PPDSDR_PSC1PSC0_PPDSDRPSC1PSC07 (0x80) ++ ++/* Bit definitions and macros for MCF_GPIO_PPDSDR_DSPI */ ++#define MCF_GPIO_PPDSDR_DSPI_PPDSDRDSPI0 (0x01) ++#define MCF_GPIO_PPDSDR_DSPI_PPDSDRDSPI1 (0x02) ++#define MCF_GPIO_PPDSDR_DSPI_PPDSDRDSPI2 (0x04) ++#define MCF_GPIO_PPDSDR_DSPI_PPDSDRDSPI3 (0x08) ++#define MCF_GPIO_PPDSDR_DSPI_PDDRDSPI4 (0x10) ++#define MCF_GPIO_PPDSDR_DSPI_PPDSDRDSPI5 (0x20) ++#define MCF_GPIO_PPDSDR_DSPI_PPDSDRDSPI6 (0x40) ++ ++/* Bit definitions and macros for MCF_GPIO_PCLRR_FBCTL */ ++#define MCF_GPIO_PCLRR_FBCTL_PCLRRFBCTL0 (0x01) ++#define MCF_GPIO_PCLRR_FBCTL_PCLRRFBCTL1 (0x02) ++#define MCF_GPIO_PCLRR_FBCTL_PCLRRFBCTL2 (0x04) ++#define MCF_GPIO_PCLRR_FBCTL_PCLRRFBCTL3 (0x08) ++#define MCF_GPIO_PCLRR_FBCTL_PCLRRFBCTL4 (0x10) ++#define MCF_GPIO_PCLRR_FBCTL_PCLRRFBCTL5 (0x20) ++#define MCF_GPIO_PCLRR_FBCTL_PCLRRFBCTL6 (0x40) ++#define MCF_GPIO_PCLRR_FBCTL_PCLRRFBCTL7 (0x80) ++ ++/* Bit definitions and macros for MCF_GPIO_PCLRR_FBCS */ ++#define MCF_GPIO_PCLRR_FBCS_PCLRRFBCS1 (0x02) ++#define MCF_GPIO_PCLRR_FBCS_PCLRRFBCS2 (0x04) ++#define MCF_GPIO_PCLRR_FBCS_PCLRRFBCS3 (0x08) ++#define MCF_GPIO_PCLRR_FBCS_PCLRRFBCS4 (0x10) ++#define MCF_GPIO_PCLRR_FBCS_PCLRRFBCS5 (0x20) ++ ++/* Bit definitions and macros for MCF_GPIO_PCLRR_DMA */ ++#define MCF_GPIO_PCLRR_DMA_PCLRRDMA0 (0x01) ++#define MCF_GPIO_PCLRR_DMA_PCLRRDMA1 (0x02) ++#define MCF_GPIO_PCLRR_DMA_PCLRRDMA2 (0x04) ++#define MCF_GPIO_PCLRR_DMA_PCLRRDMA3 (0x08) ++ ++/* Bit definitions and macros for MCF_GPIO_PCLRR_FEC0H */ ++#define MCF_GPIO_PCLRR_FEC0H_PCLRRFEC0H0 (0x01) ++#define MCF_GPIO_PCLRR_FEC0H_PCLRRFEC0H1 (0x02) ++#define MCF_GPIO_PCLRR_FEC0H_PCLRRFEC0H2 (0x04) ++#define MCF_GPIO_PCLRR_FEC0H_PCLRRFEC0H3 (0x08) ++#define MCF_GPIO_PCLRR_FEC0H_PCLRRFEC0H4 (0x10) ++#define MCF_GPIO_PCLRR_FEC0H_PCLRRFEC0H5 (0x20) ++#define MCF_GPIO_PCLRR_FEC0H_PCLRRFEC0H6 (0x40) ++#define MCF_GPIO_PCLRR_FEC0H_PCLRRFEC0H7 (0x80) ++ ++/* Bit definitions and macros for MCF_GPIO_PCLRR_FEC0L */ ++#define MCF_GPIO_PCLRR_FEC0L_PCLRRFEC0L0 (0x01) ++#define MCF_GPIO_PCLRR_FEC0L_PODRFEC0L1 (0x02) ++#define MCF_GPIO_PCLRR_FEC0L_PCLRRFEC0L2 (0x04) ++#define MCF_GPIO_PCLRR_FEC0L_PCLRRFEC0L3 (0x08) ++#define MCF_GPIO_PCLRR_FEC0L_PODRFEC0L4 (0x10) ++#define MCF_GPIO_PCLRR_FEC0L_PODRFEC0L5 (0x20) ++#define MCF_GPIO_PCLRR_FEC0L_PODRFEC0L6 (0x40) ++#define MCF_GPIO_PCLRR_FEC0L_PCLRRFEC0L7 (0x80) ++ ++/* Bit definitions and macros for MCF_GPIO_PCLRR_FEC1H */ ++#define MCF_GPIO_PCLRR_FEC1H_PCLRRFEC1H0 (0x01) ++#define MCF_GPIO_PCLRR_FEC1H_PCLRRFEC1H1 (0x02) ++#define MCF_GPIO_PCLRR_FEC1H_PCLRRFEC1H2 (0x04) ++#define MCF_GPIO_PCLRR_FEC1H_PODRFEC1H3 (0x08) ++#define MCF_GPIO_PCLRR_FEC1H_PODRFEC1H4 (0x10) ++#define MCF_GPIO_PCLRR_FEC1H_PCLRRFEC1H5 (0x20) ++#define MCF_GPIO_PCLRR_FEC1H_PCLRRFEC1H6 (0x40) ++#define MCF_GPIO_PCLRR_FEC1H_PCLRRFEC1H7 (0x80) ++ ++/* Bit definitions and macros for MCF_GPIO_PCLRR_FEC1L */ ++#define MCF_GPIO_PCLRR_FEC1L_PCLRRFEC1L0 (0x01) ++#define MCF_GPIO_PCLRR_FEC1L_PCLRRFEC1L1 (0x02) ++#define MCF_GPIO_PCLRR_FEC1L_PCLRRFEC1L2 (0x04) ++#define MCF_GPIO_PCLRR_FEC1L_PCLRRFEC1L3 (0x08) ++#define MCF_GPIO_PCLRR_FEC1L_PODRFEC1L4 (0x10) ++#define MCF_GPIO_PCLRR_FEC1L_PCLRRFEC1L5 (0x20) ++#define MCF_GPIO_PCLRR_FEC1L_PCLRRFEC1L6 (0x40) ++#define MCF_GPIO_PCLRR_FEC1L_PCLRRFEC1L7 (0x80) ++ ++/* Bit definitions and macros for MCF_GPIO_PCLRR_FECI2C */ ++#define MCF_GPIO_PCLRR_FECI2C_PCLRRFECI2C0 (0x01) ++#define MCF_GPIO_PCLRR_FECI2C_PCLRRFECI2C1 (0x02) ++#define MCF_GPIO_PCLRR_FECI2C_PODRFECI2C2 (0x04) ++#define MCF_GPIO_PCLRR_FECI2C_PCLRRFECI2C3 (0x08) ++ ++/* Bit definitions and macros for MCF_GPIO_PCLRR_PCIBG */ ++#define MCF_GPIO_PCLRR_PCIBG_PODRPCIBG0 (0x01) ++#define MCF_GPIO_PCLRR_PCIBG_PODRPCIBG1 (0x02) ++#define MCF_GPIO_PCLRR_PCIBG_PODRPCIBG2 (0x04) ++#define MCF_GPIO_PCLRR_PCIBG_PCLRRPCIBG3 (0x08) ++#define MCF_GPIO_PCLRR_PCIBG_PCLRRPCIBG4 (0x10) ++ ++/* Bit definitions and macros for MCF_GPIO_PCLRR_PCIBR */ ++#define MCF_GPIO_PCLRR_PCIBR_PCLRRPCIBR0 (0x01) ++#define MCF_GPIO_PCLRR_PCIBR_PCLRRPCIBR1 (0x02) ++#define MCF_GPIO_PCLRR_PCIBR_PCLRRPCIBR2 (0x04) ++#define MCF_GPIO_PCLRR_PCIBR_PODRPCIBR3 (0x08) ++#define MCF_GPIO_PCLRR_PCIBR_PODRPCIBR4 (0x10) ++ ++/* Bit definitions and macros for MCF_GPIO_PCLRR_PSC3PSC2 */ ++#define MCF_GPIO_PCLRR_PSC3PSC2_PODRPSC3PSC20 (0x01) ++#define MCF_GPIO_PCLRR_PSC3PSC2_PODRPSC3PSC21 (0x02) ++#define MCF_GPIO_PCLRR_PSC3PSC2_PCLRRPSC3PSC22 (0x04) ++#define MCF_GPIO_PCLRR_PSC3PSC2_PCLRRPSC3PSC23 (0x08) ++#define MCF_GPIO_PCLRR_PSC3PSC2_PCLRRPSC3PSC24 (0x10) ++#define MCF_GPIO_PCLRR_PSC3PSC2_PODRPSC3PSC25 (0x20) ++#define MCF_GPIO_PCLRR_PSC3PSC2_PODRPSC3PSC26 (0x40) ++#define MCF_GPIO_PCLRR_PSC3PSC2_PCLRRPSC3PSC27 (0x80) ++ ++/* Bit definitions and macros for MCF_GPIO_PCLRR_PSC1PSC0 */ ++#define MCF_GPIO_PCLRR_PSC1PSC0_PCLRRPSC1PSC00 (0x01) ++#define MCF_GPIO_PCLRR_PSC1PSC0_PCLRRPSC1PSC01 (0x02) ++#define MCF_GPIO_PCLRR_PSC1PSC0_PCLRRPSC1PSC02 (0x04) ++#define MCF_GPIO_PCLRR_PSC1PSC0_PCLRRPSC1PSC03 (0x08) ++#define MCF_GPIO_PCLRR_PSC1PSC0_PCLRRPSC1PSC04 (0x10) ++#define MCF_GPIO_PCLRR_PSC1PSC0_PCLRRPSC1PSC05 (0x20) ++#define MCF_GPIO_PCLRR_PSC1PSC0_PODRPSC1PSC06 (0x40) ++#define MCF_GPIO_PCLRR_PSC1PSC0_PCLRRPSC1PSC07 (0x80) ++ ++/* Bit definitions and macros for MCF_GPIO_PCLRR_DSPI */ ++#define MCF_GPIO_PCLRR_DSPI_PCLRRDSPI0 (0x01) ++#define MCF_GPIO_PCLRR_DSPI_PCLRRDSPI1 (0x02) ++#define MCF_GPIO_PCLRR_DSPI_PCLRRDSPI2 (0x04) ++#define MCF_GPIO_PCLRR_DSPI_PCLRRDSPI3 (0x08) ++#define MCF_GPIO_PCLRR_DSPI_PCLRRDSPI4 (0x10) ++#define MCF_GPIO_PCLRR_DSPI_PCLRRDSPI5 (0x20) ++#define MCF_GPIO_PCLRR_DSPI_PCLRRDSPI6 (0x40) ++ ++/* Bit definitions and macros for MCF_GPIO_PAR_FBCTL */ ++#define MCF_GPIO_PAR_FBCTL_PAR_TS(x) (((x)&0x0003)<<0) ++#define MCF_GPIO_PAR_FBCTL_PAR_TA (0x0004) ++#define MCF_GPIO_PAR_FBCTL_PAR_RWB (0x0010) ++#define MCF_GPIO_PAR_FBCTL_PAR_OE (0x0040) ++#define MCF_GPIO_PAR_FBCTL_PAR_BWE0 (0x0100) ++#define MCF_GPIO_PAR_FBCTL_PAR_BWE1 (0x0400) ++#define MCF_GPIO_PAR_FBCTL_PAR_BWE2 (0x1000) ++#define MCF_GPIO_PAR_FBCTL_PAR_BWE3 (0x4000) ++#define MCF_GPIO_PAR_FBCTL_PAR_TS_GPIO (0) ++#define MCF_GPIO_PAR_FBCTL_PAR_TS_TBST (2) ++#define MCF_GPIO_PAR_FBCTL_PAR_TS_TS (3) ++ ++/* Bit definitions and macros for MCF_GPIO_PAR_FBCS */ ++#define MCF_GPIO_PAR_FBCS_PAR_CS1 (0x02) ++#define MCF_GPIO_PAR_FBCS_PAR_CS2 (0x04) ++#define MCF_GPIO_PAR_FBCS_PAR_CS3 (0x08) ++#define MCF_GPIO_PAR_FBCS_PAR_CS4 (0x10) ++#define MCF_GPIO_PAR_FBCS_PAR_CS5 (0x20) ++ ++/* Bit definitions and macros for MCF_GPIO_PAR_DMA */ ++#define MCF_GPIO_PAR_DMA_PAR_DREQ0(x) (((x)&0x03)<<0) ++#define MCF_GPIO_PAR_DMA_PAR_DREQ1(x) (((x)&0x03)<<2) ++#define MCF_GPIO_PAR_DMA_PAR_DACK0(x) (((x)&0x03)<<4) ++#define MCF_GPIO_PAR_DMA_PAR_DACK1(x) (((x)&0x03)<<6) ++#define MCF_GPIO_PAR_DMA_PAR_DACKx_GPIO (0) ++#define MCF_GPIO_PAR_DMA_PAR_DACKx_TOUT (2) ++#define MCF_GPIO_PAR_DMA_PAR_DACKx_DACK (3) ++#define MCF_GPIO_PAR_DMA_PAR_DREQx_GPIO (0) ++#define MCF_GPIO_PAR_DMA_PAR_DREQx_TIN (2) ++#define MCF_GPIO_PAR_DMA_PAR_DREQx_DREQ (3) ++ ++/* Bit definitions and macros for MCF_GPIO_PAR_FECI2CIRQ */ ++#define MCF_GPIO_PAR_FECI2CIRQ_PAR_IRQ5 (0x0001) ++#define MCF_GPIO_PAR_FECI2CIRQ_PAR_IRQ6 (0x0002) ++#define MCF_GPIO_PAR_FECI2CIRQ_PAR_SCL (0x0004) ++#define MCF_GPIO_PAR_FECI2CIRQ_PAR_SDA (0x0008) ++#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MDC(x) (((x)&0x0003)<<6) ++#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MDIO(x) (((x)&0x0003)<<8) ++#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MII (0x0400) ++#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E17 (0x0800) ++#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E0MDC (0x1000) ++#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E0MDIO (0x2000) ++#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E0MII (0x4000) ++#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E07 (0x8000) ++#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MDIO_CANRX (0x0000) ++#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MDIO_SDA (0x0200) ++#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MDIO_EMDIO (0x0300) ++#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MDC_CANTX (0x0000) ++#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MDC_SCL (0x0080) ++#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MDC_EMDC (0x00C0) ++ ++/* Bit definitions and macros for MCF_GPIO_PAR_PCIBG */ ++#define MCF_GPIO_PAR_PCIBG_PAR_PCIBG0(x) (((x)&0x0003)<<0) ++#define MCF_GPIO_PAR_PCIBG_PAR_PCIBG1(x) (((x)&0x0003)<<2) ++#define MCF_GPIO_PAR_PCIBG_PAR_PCIBG2(x) (((x)&0x0003)<<4) ++#define MCF_GPIO_PAR_PCIBG_PAR_PCIBG3(x) (((x)&0x0003)<<6) ++#define MCF_GPIO_PAR_PCIBG_PAR_PCIBG4(x) (((x)&0x0003)<<8) ++ ++/* Bit definitions and macros for MCF_GPIO_PAR_PCIBR */ ++#define MCF_GPIO_PAR_PCIBR_PAR_PCIBG0(x) (((x)&0x0003)<<0) ++#define MCF_GPIO_PAR_PCIBR_PAR_PCIBG1(x) (((x)&0x0003)<<2) ++#define MCF_GPIO_PAR_PCIBR_PAR_PCIBG2(x) (((x)&0x0003)<<4) ++#define MCF_GPIO_PAR_PCIBR_PAR_PCIBG3(x) (((x)&0x0003)<<6) ++#define MCF_GPIO_PAR_PCIBR_PAR_PCIBR4(x) (((x)&0x0003)<<8) ++ ++/* Bit definitions and macros for MCF_GPIO_PAR_PSC3 */ ++#define MCF_GPIO_PAR_PSC3_PAR_TXD3 (0x04) ++#define MCF_GPIO_PAR_PSC3_PAR_RXD3 (0x08) ++#define MCF_GPIO_PAR_PSC3_PAR_RTS3(x) (((x)&0x03)<<4) ++#define MCF_GPIO_PAR_PSC3_PAR_CTS3(x) (((x)&0x03)<<6) ++#define MCF_GPIO_PAR_PSC3_PAR_CTS3_GPIO (0x00) ++#define MCF_GPIO_PAR_PSC3_PAR_CTS3_BCLK (0x80) ++#define MCF_GPIO_PAR_PSC3_PAR_CTS3_CTS (0xC0) ++#define MCF_GPIO_PAR_PSC3_PAR_RTS3_GPIO (0x00) ++#define MCF_GPIO_PAR_PSC3_PAR_RTS3_FSYNC (0x20) ++#define MCF_GPIO_PAR_PSC3_PAR_RTS3_RTS (0x30) ++#define MCF_GPIO_PAR_PSC3_PAR_CTS2_CANRX (0x40) ++ ++/* Bit definitions and macros for MCF_GPIO_PAR_PSC2 */ ++#define MCF_GPIO_PAR_PSC2_PAR_TXD2 (0x04) ++#define MCF_GPIO_PAR_PSC2_PAR_RXD2 (0x08) ++#define MCF_GPIO_PAR_PSC2_PAR_RTS2(x) (((x)&0x03)<<4) ++#define MCF_GPIO_PAR_PSC2_PAR_CTS2(x) (((x)&0x03)<<6) ++#define MCF_GPIO_PAR_PSC2_PAR_CTS2_GPIO (0x00) ++#define MCF_GPIO_PAR_PSC2_PAR_CTS2_BCLK (0x80) ++#define MCF_GPIO_PAR_PSC2_PAR_CTS2_CTS (0xC0) ++#define MCF_GPIO_PAR_PSC2_PAR_RTS2_GPIO (0x00) ++#define MCF_GPIO_PAR_PSC2_PAR_RTS2_CANTX (0x10) ++#define MCF_GPIO_PAR_PSC2_PAR_RTS2_FSYNC (0x20) ++#define MCF_GPIO_PAR_PSC2_PAR_RTS2_RTS (0x30) ++#define MCF_GPIO_PAR_PSC2_PAR_RTS2_CANRX (0x40) ++ ++/* Bit definitions and macros for MCF_GPIO_PAR_PSC1 */ ++#define MCF_GPIO_PAR_PSC1_PAR_TXD1 (0x04) ++#define MCF_GPIO_PAR_PSC1_PAR_RXD1 (0x08) ++#define MCF_GPIO_PAR_PSC1_PAR_RTS1(x) (((x)&0x03)<<4) ++#define MCF_GPIO_PAR_PSC1_PAR_CTS1(x) (((x)&0x03)<<6) ++#define MCF_GPIO_PAR_PSC1_PAR_CTS1_GPIO (0x00) ++#define MCF_GPIO_PAR_PSC1_PAR_CTS1_BCLK (0x80) ++#define MCF_GPIO_PAR_PSC1_PAR_CTS1_CTS (0xC0) ++#define MCF_GPIO_PAR_PSC1_PAR_RTS1_GPIO (0x00) ++#define MCF_GPIO_PAR_PSC1_PAR_RTS1_FSYNC (0x20) ++#define MCF_GPIO_PAR_PSC1_PAR_RTS1_RTS (0x30) ++ ++/* Bit definitions and macros for MCF_GPIO_PAR_PSC0 */ ++#define MCF_GPIO_PAR_PSC0_PAR_TXD0 (0x04) ++#define MCF_GPIO_PAR_PSC0_PAR_RXD0 (0x08) ++#define MCF_GPIO_PAR_PSC0_PAR_RTS0(x) (((x)&0x03)<<4) ++#define MCF_GPIO_PAR_PSC0_PAR_CTS0(x) (((x)&0x03)<<6) ++#define MCF_GPIO_PAR_PSC0_PAR_CTS0_GPIO (0x00) ++#define MCF_GPIO_PAR_PSC0_PAR_CTS0_BCLK (0x80) ++#define MCF_GPIO_PAR_PSC0_PAR_CTS0_CTS (0xC0) ++#define MCF_GPIO_PAR_PSC0_PAR_RTS0_GPIO (0x00) ++#define MCF_GPIO_PAR_PSC0_PAR_RTS0_FSYNC (0x20) ++#define MCF_GPIO_PAR_PSC0_PAR_RTS0_RTS (0x30) ++ ++/* Bit definitions and macros for MCF_GPIO_PAR_DSPI */ ++#define MCF_GPIO_PAR_DSPI_PAR_SOUT(x) (((x)&0x0003)<<0) ++#define MCF_GPIO_PAR_DSPI_PAR_SIN(x) (((x)&0x0003)<<2) ++#define MCF_GPIO_PAR_DSPI_PAR_SCK(x) (((x)&0x0003)<<4) ++#define MCF_GPIO_PAR_DSPI_PAR_CS0(x) (((x)&0x0003)<<6) ++#define MCF_GPIO_PAR_DSPI_PAR_CS2(x) (((x)&0x0003)<<8) ++#define MCF_GPIO_PAR_DSPI_PAR_CS3(x) (((x)&0x0003)<<10) ++#define MCF_GPIO_PAR_DSPI_PAR_CS5 (0x1000) ++#define MCF_GPIO_PAR_DSPI_PAR_CS3_GPIO (0x0000) ++#define MCF_GPIO_PAR_DSPI_PAR_CS3_CANTX (0x0400) ++#define MCF_GPIO_PAR_DSPI_PAR_CS3_TOUT (0x0800) ++#define MCF_GPIO_PAR_DSPI_PAR_CS3_DSPICS (0x0C00) ++#define MCF_GPIO_PAR_DSPI_PAR_CS2_GPIO (0x0000) ++#define MCF_GPIO_PAR_DSPI_PAR_CS2_CANTX (0x0100) ++#define MCF_GPIO_PAR_DSPI_PAR_CS2_TOUT (0x0200) ++#define MCF_GPIO_PAR_DSPI_PAR_CS2_DSPICS (0x0300) ++#define MCF_GPIO_PAR_DSPI_PAR_CS0_GPIO (0x0000) ++#define MCF_GPIO_PAR_DSPI_PAR_CS0_FSYNC (0x0040) ++#define MCF_GPIO_PAR_DSPI_PAR_CS0_RTS (0x0080) ++#define MCF_GPIO_PAR_DSPI_PAR_CS0_DSPICS (0x00C0) ++#define MCF_GPIO_PAR_DSPI_PAR_SCK_GPIO (0x0000) ++#define MCF_GPIO_PAR_DSPI_PAR_SCK_BCLK (0x0010) ++#define MCF_GPIO_PAR_DSPI_PAR_SCK_CTS (0x0020) ++#define MCF_GPIO_PAR_DSPI_PAR_SCK_SCK (0x0030) ++#define MCF_GPIO_PAR_DSPI_PAR_SIN_GPIO (0x0000) ++#define MCF_GPIO_PAR_DSPI_PAR_SIN_RXD (0x0008) ++#define MCF_GPIO_PAR_DSPI_PAR_SIN_SIN (0x000C) ++#define MCF_GPIO_PAR_DSPI_PAR_SOUT_GPIO (0x0000) ++#define MCF_GPIO_PAR_DSPI_PAR_SOUT_TXD (0x0002) ++#define MCF_GPIO_PAR_DSPI_PAR_SOUT_SOUT (0x0003) ++ ++/* Bit definitions and macros for MCF_GPIO_PAR_TIMER */ ++#define MCF_GPIO_PAR_TIMER_PAR_TOUT2 (0x01) ++#define MCF_GPIO_PAR_TIMER_PAR_TIN2(x) (((x)&0x03)<<1) ++#define MCF_GPIO_PAR_TIMER_PAR_TOUT3 (0x08) ++#define MCF_GPIO_PAR_TIMER_PAR_TIN3(x) (((x)&0x03)<<4) ++#define MCF_GPIO_PAR_TIMER_PAR_TIN3_CANRX (0x00) ++#define MCF_GPIO_PAR_TIMER_PAR_TIN3_IRQ (0x20) ++#define MCF_GPIO_PAR_TIMER_PAR_TIN3_TIN (0x30) ++#define MCF_GPIO_PAR_TIMER_PAR_TIN2_CANRX (0x00) ++#define MCF_GPIO_PAR_TIMER_PAR_TIN2_IRQ (0x04) ++#define MCF_GPIO_PAR_TIMER_PAR_TIN2_TIN (0x06) ++ ++/********************************************************************/ ++ ++#endif /* _M5485GPIO_H_ */ +--- /dev/null ++++ b/include/asm-m68k/m5485gpt.h +@@ -0,0 +1,88 @@ ++/* ++ * File: mcf548x_gpt.h ++ * Purpose: Register and bit definitions for the MCF548X ++ * ++ * Notes: ++ * ++ */ ++ ++#ifndef __MCF548X_GPT_H__ ++#define __MCF548X_GPT_H__ ++ ++/********************************************************************* ++* ++* General Purpose Timers (GPT) ++* ++*********************************************************************/ ++ ++/* Register read/write macros */ ++#define MCF_GPT_GMS0 MCF_REG32(0x000800) ++#define MCF_GPT_GCIR0 MCF_REG32(0x000804) ++#define MCF_GPT_GPWM0 MCF_REG32(0x000808) ++#define MCF_GPT_GSR0 MCF_REG32(0x00080C) ++#define MCF_GPT_GMS1 MCF_REG32(0x000810) ++#define MCF_GPT_GCIR1 MCF_REG32(0x000814) ++#define MCF_GPT_GPWM1 MCF_REG32(0x000818) ++#define MCF_GPT_GSR1 MCF_REG32(0x00081C) ++#define MCF_GPT_GMS2 MCF_REG32(0x000820) ++#define MCF_GPT_GCIR2 MCF_REG32(0x000824) ++#define MCF_GPT_GPWM2 MCF_REG32(0x000828) ++#define MCF_GPT_GSR2 MCF_REG32(0x00082C) ++#define MCF_GPT_GMS3 MCF_REG32(0x000830) ++#define MCF_GPT_GCIR3 MCF_REG32(0x000834) ++#define MCF_GPT_GPWM3 MCF_REG32(0x000838) ++#define MCF_GPT_GSR3 MCF_REG32(0x00083C) ++#define MCF_GPT_GMS(x) MCF_REG32(0x000800+((x)*0x010)) ++#define MCF_GPT_GCIR(x) MCF_REG32(0x000804+((x)*0x010)) ++#define MCF_GPT_GPWM(x) MCF_REG32(0x000808+((x)*0x010)) ++#define MCF_GPT_GSR(x) MCF_REG32(0x00080C+((x)*0x010)) ++ ++/* Bit definitions and macros for MCF_GPT_GMS */ ++#define MCF_GPT_GMS_TMS(x) (((x)&0x00000007)<<0) ++#define MCF_GPT_GMS_GPIO(x) (((x)&0x00000003)<<4) ++#define MCF_GPT_GMS_IEN (0x00000100) ++#define MCF_GPT_GMS_OD (0x00000200) ++#define MCF_GPT_GMS_SC (0x00000400) ++#define MCF_GPT_GMS_CE (0x00001000) ++#define MCF_GPT_GMS_WDEN (0x00008000) ++#define MCF_GPT_GMS_ICT(x) (((x)&0x00000003)<<16) ++#define MCF_GPT_GMS_OCT(x) (((x)&0x00000003)<<20) ++#define MCF_GPT_GMS_OCPW(x) (((x)&0x000000FF)<<24) ++#define MCF_GPT_GMS_OCT_FRCLOW (0x00000000) ++#define MCF_GPT_GMS_OCT_PULSEHI (0x00100000) ++#define MCF_GPT_GMS_OCT_PULSELO (0x00200000) ++#define MCF_GPT_GMS_OCT_TOGGLE (0x00300000) ++#define MCF_GPT_GMS_ICT_ANY (0x00000000) ++#define MCF_GPT_GMS_ICT_RISE (0x00010000) ++#define MCF_GPT_GMS_ICT_FALL (0x00020000) ++#define MCF_GPT_GMS_ICT_PULSE (0x00030000) ++#define MCF_GPT_GMS_GPIO_INPUT (0x00000000) ++#define MCF_GPT_GMS_GPIO_OUTLO (0x00000020) ++#define MCF_GPT_GMS_GPIO_OUTHI (0x00000030) ++#define MCF_GPT_GMS_TMS_DISABLE (0x00000000) ++#define MCF_GPT_GMS_TMS_INCAPT (0x00000001) ++#define MCF_GPT_GMS_TMS_OUTCAPT (0x00000002) ++#define MCF_GPT_GMS_TMS_PWM (0x00000003) ++#define MCF_GPT_GMS_TMS_GPIO (0x00000004) ++ ++/* Bit definitions and macros for MCF_GPT_GCIR */ ++#define MCF_GPT_GCIR_CNT(x) (((x)&0x0000FFFF)<<0) ++#define MCF_GPT_GCIR_PRE(x) (((x)&0x0000FFFF)<<16) ++ ++/* Bit definitions and macros for MCF_GPT_GPWM */ ++#define MCF_GPT_GPWM_LOAD (0x00000001) ++#define MCF_GPT_GPWM_PWMOP (0x00000100) ++#define MCF_GPT_GPWM_WIDTH(x) (((x)&0x0000FFFF)<<16) ++ ++/* Bit definitions and macros for MCF_GPT_GSR */ ++#define MCF_GPT_GSR_CAPT (0x00000001) ++#define MCF_GPT_GSR_COMP (0x00000002) ++#define MCF_GPT_GSR_PWMP (0x00000004) ++#define MCF_GPT_GSR_TEXP (0x00000008) ++#define MCF_GPT_GSR_PIN (0x00000100) ++#define MCF_GPT_GSR_OVF(x) (((x)&0x00000007)<<12) ++#define MCF_GPT_GSR_CAPTURE(x) (((x)&0x0000FFFF)<<16) ++ ++/********************************************************************/ ++ ++#endif /* __MCF548X_GPT_H__ */ +--- /dev/null ++++ b/include/asm-m68k/m5485i2c.h +@@ -0,0 +1,45 @@ ++/* ++ * m5485i2c.h -- ColdFire 547x/548x i2c controller support. ++ */ ++#ifndef M548X_I2C_H ++#define M548X_I2C_H ++ ++/* Register read/write macros */ ++#define MCF_I2AR MCF_REG08(0x008F00) /* I2C Address */ ++#define MCF_I2FDR MCF_REG08(0x008F04) /* I2C Frequency Divider */ ++#define MCF_I2CR MCF_REG08(0x008F08) /* I2C Control */ ++#define MCF_I2SR MCF_REG08(0x008F0C) /* I2C Status */ ++#define MCF_I2DR MCF_REG08(0x008F10) /* I2C Data I/O */ ++#define MCF_I2ICR MCF_REG08(0x008F20) /* I2C Interrupt Control */ ++ ++/* Bit definitions and macros for MCF_I2C_I2AR */ ++#define MCF_I2AR_ADR(x) (((x)&0x7F)<<1) ++ ++/* Bit definitions and macros for MCF_I2C_I2FDR */ ++#define MCF_I2FDR_IC(x) (((x)&0x3F)<<0) ++ ++/* Bit definitions and macros for MCF_I2C_I2CR */ ++#define MCF_I2CR_RSTA (0x04) ++#define MCF_I2CR_TXAK (0x08) ++#define MCF_I2CR_MTX (0x10) ++#define MCF_I2CR_MSTA (0x20) ++#define MCF_I2CR_IIEN (0x40) ++#define MCF_I2CR_IEN (0x80) ++ ++/* Bit definitions and macros for MCF_I2C_I2SR */ ++#define MCF_I2SR_RXAK (0x01) ++#define MCF_I2SR_IIF (0x02) ++#define MCF_I2SR_SRW (0x04) ++#define MCF_I2SR_IAL (0x10) ++#define MCF_I2SR_IBB (0x20) ++#define MCF_I2SR_IAAS (0x40) ++#define MCF_I2SR_ICF (0x80) ++ ++/* Bit definitions and macros for MCF_I2C_I2ICR */ ++#define MCF_I2ICR_IE (0x01) ++#define MCF_I2ICR_RE (0x02) ++#define MCF_I2ICR_TE (0x04) ++#define MCF_I2ICR_BNBE (0x08) ++ ++/********************************************************************/ ++#endif +--- /dev/null ++++ b/include/asm-m68k/m5485pci.h +@@ -0,0 +1,330 @@ ++/* ++ * m5485pci.h -- ColdFire 547x/548x PCI controller support. ++ */ ++#ifndef __MCF548X_PCI_H__ ++#define __MCF548X_PCI_H__ ++ ++ ++/* PCI Type 0 Configuration Registers */ ++#define MCF_PCIIDR MCF_REG32(0x000B00) /* PCI Device ID/Vendor ID */ ++#define MCF_PCISCR MCF_REG32(0x000B04) /* PCI Status/Command */ ++#define MCF_PCICCRIR MCF_REG32(0x000B08) /* PCI Class Code / Revision ID */ ++#define MCF_PCICR1 MCF_REG32(0x000B0C) /* PCI Configuration 1 Register */ ++#define MCF_PCIBAR0 MCF_REG32(0x000B10) /* PCI Base Address Register 0 */ ++#define MCF_PCIBAR1 MCF_REG32(0x000B14) /* PCI Base Address Register 1 */ ++#define MCF_PCICCPR MCF_REG32(0x000B28) /* PCI Cardbus CIS Pointer */ ++#define MCF_PCISID MCF_REG32(0x000B2C) /* Subsystem ID/Subsystem Vendor ID*/ ++#define MCF_PCIERBAR MCF_REG32(0x000B30) /* PCI Expansion ROM */ ++#define MCF_PCICPR MCF_REG32(0x000B30) /* PCI Capabilities Pointer */ ++#define MCF_PCICR2 MCF_REG32(0x000B3C) /* PCI Configuration Register 2 */ ++ ++/* General Control/Status Registers */ ++#define MCF_PCIGSCR MCF_REG32(0x000B60) /* Global Status/Control Register */ ++#define MCF_PCITBATR0 MCF_REG32(0x000B64) /* Target Base Address Translation 0*/ ++#define MCF_PCITBATR1 MCF_REG32(0x000B68) /* Target Base Address Translation 1*/ ++#define MCF_PCITCR MCF_REG32(0x000B6C) /* Target Control Register */ ++#define MCF_PCIIW0BTAR MCF_REG32(0x000B70) /* Initiator Window 0 Base Address */ ++#define MCF_PCIIW1BTAR MCF_REG32(0x000B74) /* Initiator Window 1 Base Address */ ++#define MCF_PCIIW2BTAR MCF_REG32(0x000B78) /* Initiator Window 2 Base Address */ ++#define MCF_PCIIWCR MCF_REG32(0x000B80) /* Initiator Window Configuration */ ++#define MCF_PCIICR MCF_REG32(0x000B84) /* Initiator Control Register */ ++#define MCF_PCIISR MCF_REG32(0x000B88) /* Initiator Status Register */ ++#define MCF_PCICAR MCF_REG32(0x000BF8) /* Configuration Address Register */ ++ ++/* CommBus FIFO Transmit Interface Registers */ ++#define MCF_PCITPSR MCF_REG32(0x008400) /* Tx Packet Size Register */ ++#define MCF_PCITSAR MCF_REG32(0x008404) /* Tx Start Address Register */ ++#define MCF_PCITTCR MCF_REG32(0x008408) /* Tx Transaction Control Register */ ++#define MCF_PCITER MCF_REG32(0x00840C) /* Tx Enables Register */ ++#define MCF_PCITNAR MCF_REG32(0x008410) /* Tx Next Address Register */ ++#define MCF_PCITLWR MCF_REG32(0x008414) /* Tx Last Word Register */ ++#define MCF_PCITDCR MCF_REG32(0x008418) /* Tx Done Counts Register */ ++#define MCF_PCITSR MCF_REG32(0x00841C) /* Tx Status Register */ ++#define MCF_PCITFDR MCF_REG32(0x008440) /* Tx FIFO Data Register */ ++#define MCF_PCITFSR MCF_REG32(0x008444) /* Tx FIFO Status Register */ ++#define MCF_PCITFCR MCF_REG32(0x008448) /* Tx FIFO Control Register */ ++#define MCF_PCITFAR MCF_REG32(0x00844C) /* Tx FIFO Alarm Register */ ++#define MCF_PCITFRPR MCF_REG32(0x008450) /* Tx FIFO Read Pointer Register */ ++#define MCF_PCITFWPR MCF_REG32(0x008454) /* Tx FIFO Write Pointer Register */ ++ ++/* CommBus FIFO Receive Interface Registers */ ++#define MCF_PCIRPSR MCF_REG32(0x008480) /* Tx Packet Size Register */ ++#define MCF_PCIRSAR MCF_REG32(0x008484) /* Tx Start Address Register */ ++#define MCF_PCIRTCR MCF_REG32(0x008488) /* Tx Transaction Control Register */ ++#define MCF_PCIRER MCF_REG32(0x00848C) /* Tx Enables Register */ ++#define MCF_PCIRNAR MCF_REG32(0x008490) /* Tx Next Address Register */ ++#define MCF_PCIRDCR MCF_REG32(0x008498) /* Tx Done Counts Register */ ++#define MCF_PCIRSR MCF_REG32(0x00849C) /* Tx Status Register */ ++#define MCF_PCIRFDR MCF_REG32(0x0084C0) /* Tx FIFO Data Register */ ++#define MCF_PCIRFSR MCF_REG32(0x0084C4) /* Tx FIFO Status Register */ ++#define MCF_PCIRFCR MCF_REG32(0x0084C8) /* Tx FIFO Control Register */ ++#define MCF_PCIRFAR MCF_REG32(0x0084CC) /* Tx FIFO Alarm Register */ ++#define MCF_PCIRFRPR MCF_REG32(0x0084D0) /* Tx FIFO Read Pointer Register */ ++#define MCF_PCIRFWPR MCF_REG32(0x0084D4) /* Tx FIFO Write Pointer Register */ ++ ++/* PCI Arbiter Registers */ ++#define MCF_PCIARB_PACR MCF_REG32(0x000C00) ++#define MCF_PCIARB_PASR MCF_REG32(0x000C04) ++ ++ ++/* Bit definitions and macros for MCF_PCIIDR */ ++#define MCF_PCIIDR_VENDORID(x) (((x)&0x0000FFFF)<<0) ++#define MCF_PCIIDR_DEVICEID(x) (((x)&0x0000FFFF)<<16) ++ ++/* Bit definitions and macros for MCF_PCISCR */ ++#define MCF_PCISCR_M (0x00000002) ++#define MCF_PCISCR_B (0x00000004) ++#define MCF_PCISCR_SP (0x00000008) ++#define MCF_PCISCR_MW (0x00000010) ++#define MCF_PCISCR_PER (0x00000040) ++#define MCF_PCISCR_S (0x00000100) ++#define MCF_PCISCR_F (0x00000200) ++#define MCF_PCISCR_C (0x00100000) ++#define MCF_PCISCR_66M (0x00200000) ++#define MCF_PCISCR_R (0x00400000) ++#define MCF_PCISCR_FC (0x00800000) ++#define MCF_PCISCR_DP (0x01000000) ++#define MCF_PCISCR_DT(x) (((x)&0x00000003)<<25) ++#define MCF_PCISCR_TS (0x08000000) ++#define MCF_PCISCR_TR (0x10000000) ++#define MCF_PCISCR_MA (0x20000000) ++#define MCF_PCISCR_SE (0x40000000) ++#define MCF_PCISCR_PE (0x80000000) ++ ++/* Bit definitions and macros for MCF_PCICCRIR */ ++#define MCF_PCICCRIR_REVID(x) (((x)&0x000000FF)<<0) ++#define MCF_PCICCRIR_CLASSCODE(x) (((x)&0x00FFFFFF)<<8) ++ ++/* Bit definitions and macros for MCF_PCICR1 */ ++#define MCF_PCICR1_CACHELINESIZE(x) (((x)&0x0000000F)<<0) ++#define MCF_PCICR1_LATTIMER(x) (((x)&0x000000FF)<<8) ++#define MCF_PCICR1_HEADERTYPE(x) (((x)&0x000000FF)<<16) ++#define MCF_PCICR1_BIST(x) (((x)&0x000000FF)<<24) ++ ++/* Bit definitions and macros for MCF_PCIBAR# */ ++#define MCF_PCIBAR0_ADDR(x) (((x)&0x00003FFF)<<18) ++#define MCF_PCIBAR1_ADDR(x) (((x)&0x00000003)<<30) ++ ++/* Bit definitions and macros for MCF_PCICR2 */ ++#define MCF_PCICR2_INTLINE(x) (((x)&0x000000FF)<<0) ++#define MCF_PCICR2_INTPIN(x) (((x)&0x000000FF)<<8) ++#define MCF_PCICR2_MINGNT(x) (((x)&0x000000FF)<<16) ++#define MCF_PCICR2_MAXLAT(x) (((x)&0x000000FF)<<24) ++ ++/* Bit definitions and macros for MCF_PCIGSCR */ ++#define MCF_PCIGSCR_PR (0x00000001) ++#define MCF_PCIGSCR_SEE (0x00001000) ++#define MCF_PCIGSCR_PEE (0x00002000) ++#define MCF_PCIGSCR_SE (0x10000000) ++#define MCF_PCIGSCR_PE (0x20000000) ++ ++/* Bit definitions and macros for MCF_PCITBATR0 */ ++#define MCF_PCITBATR0_EN (0x00000001) ++#define MCF_PCITBATR0_BAT0(x) (((x)&0x00003FFF)<<18) ++ ++/* Bit definitions and macros for MCF_PCITBATR1 */ ++#define MCF_PCITBATR1_EN (0x00000001) ++#define MCF_PCITBATR1_BAT1(x) (((x)&0x00000003)<<30) ++ ++/* Bit definitions and macros for MCF_PCITCR */ ++#define MCF_PCITCR_P (0x00010000) ++#define MCF_PCITCR_LD (0x01000000) ++ ++/* Bit definitions and macros for MCF_PCIIW0BTAR */ ++#define MCF_PCIIW0BTAR_WTA0(x) (((x)&0x000000FF)<<8) ++#define MCF_PCIIW0BTAR_WAM0(x) (((x)&0x000000FF)<<16) ++#define MCF_PCIIW0BTAR_WBA0(x) (((x)&0x000000FF)<<24) ++ ++/* Bit definitions and macros for MCF_PCIIW1BTAR */ ++#define MCF_PCIIW1BTAR_WTA1(x) (((x)&0x000000FF)<<8) ++#define MCF_PCIIW1BTAR_WAM1(x) (((x)&0x000000FF)<<16) ++#define MCF_PCIIW1BTAR_WBA1(x) (((x)&0x000000FF)<<24) ++ ++/* Bit definitions and macros for MCF_PCIIW2BTAR */ ++#define MCF_PCIIW2BTAR_WTA2(x) (((x)&0x000000FF)<<8) ++#define MCF_PCIIW2BTAR_WAM2(x) (((x)&0x000000FF)<<16) ++#define MCF_PCIIW2BTAR_WBA2(x) (((x)&0x000000FF)<<24) ++ ++/* Bit definitions and macros for MCF_PCIIWCR */ ++#define MCF_PCIIWCR_WINCTRL2(x) (((x)&0x0000000F)<<8) ++#define MCF_PCIIWCR_WINCTRL1(x) (((x)&0x0000000F)<<16) ++#define MCF_PCIIWCR_WINCTRL0(x) (((x)&0x0000000F)<<24) ++#define MCF_PCIIWCR_WINCTRL0_MEMREAD (0x01000000) ++#define MCF_PCIIWCR_WINCTRL0_MEMRDLINE (0x03000000) ++#define MCF_PCIIWCR_WINCTRL0_MEMRDMUL (0x05000000) ++#define MCF_PCIIWCR_WINCTRL0_IO (0x09000000) ++#define MCF_PCIIWCR_WINCTRL0_E (0x01000000) ++#define MCF_PCIIWCR_WINCTRL1_MEMREAD (0x00010000) ++#define MCF_PCIIWCR_WINCTRL1_MEMRDLINE (0x00030000) ++#define MCF_PCIIWCR_WINCTRL1_MEMRDMUL (0x00050000) ++#define MCF_PCIIWCR_WINCTRL1_IO (0x00090000) ++#define MCF_PCIIWCR_WINCTRL1_E (0x00010000) ++#define MCF_PCIIWCR_WINCTRL2_MEMREAD (0x00000100) ++#define MCF_PCIIWCR_WINCTRL2_MEMRDLINE (0x00000300) ++#define MCF_PCIIWCR_WINCTRL2_MEMRDMUL (0x00000500) ++#define MCF_PCIIWCR_WINCTRL2_IO (0x00000900) ++#define MCF_PCIIWCR_WINCTRL2_E (0x00000100) ++ ++ ++/* Bit definitions and macros for MCF_PCIICR */ ++#define MCF_PCIICR_MAXRETRY(x) (((x)&0x000000FF)<<0) ++#define MCF_PCIICR_TAE (0x01000000) ++#define MCF_PCIICR_IAE (0x02000000) ++#define MCF_PCIICR_REE (0x04000000) ++ ++/* Bit definitions and macros for MCF_PCIISR */ ++#define MCF_PCIISR_TA (0x01000000) ++#define MCF_PCIISR_IA (0x02000000) ++#define MCF_PCIISR_RE (0x04000000) ++ ++/* Bit definitions and macros for MCF_PCICAR */ ++#define MCF_PCICAR_DWORD(x) (((x)&0x0000003F)<<2) ++#define MCF_PCICAR_FUNCNUM(x) (((x)&0x00000007)<<8) ++#define MCF_PCICAR_DEVNUM(x) (((x)&0x0000001F)<<11) ++#define MCF_PCICAR_BUSNUM(x) (((x)&0x000000FF)<<16) ++#define MCF_PCICAR_E (0x80000000) ++ ++/* Bit definitions and macros for MCF_PCITPSR */ ++#define MCF_PCITPSR_PKTSIZE(x) (((x)&0x0000FFFF)<<16) ++ ++/* Bit definitions and macros for MCF_PCITTCR */ ++#define MCF_PCITTCR_DI (0x00000001) ++#define MCF_PCITTCR_W (0x00000010) ++#define MCF_PCITTCR_MAXBEATS(x) (((x)&0x00000007)<<8) ++#define MCF_PCITTCR_MAXRETRY(x) (((x)&0x000000FF)<<16) ++#define MCF_PCITTCR_PCICMD(x) (((x)&0x0000000F)<<24) ++ ++/* Bit definitions and macros for MCF_PCITER */ ++#define MCF_PCITER_NE (0x00010000) ++#define MCF_PCITER_IAE (0x00020000) ++#define MCF_PCITER_TAE (0x00040000) ++#define MCF_PCITER_RE (0x00080000) ++#define MCF_PCITER_SE (0x00100000) ++#define MCF_PCITER_FEE (0x00200000) ++#define MCF_PCITER_ME (0x01000000) ++#define MCF_PCITER_BE (0x08000000) ++#define MCF_PCITER_CM (0x10000000) ++#define MCF_PCITER_RF (0x40000000) ++#define MCF_PCITER_RC (0x80000000) ++ ++/* Bit definitions and macros for MCF_PCITDCR */ ++#define MCF_PCITDCR_PKTSDONE(x) (((x)&0x0000FFFF)<<0) ++#define MCF_PCITDCR_BYTESDONE(x) (((x)&0x0000FFFF)<<16) ++ ++/* Bit definitions and macros for MCF_PCITSR */ ++#define MCF_PCITSR_IA (0x00010000) ++#define MCF_PCITSR_TA (0x00020000) ++#define MCF_PCITSR_RE (0x00040000) ++#define MCF_PCITSR_SE (0x00080000) ++#define MCF_PCITSR_FE (0x00100000) ++#define MCF_PCITSR_BE1 (0x00200000) ++#define MCF_PCITSR_BE2 (0x00400000) ++#define MCF_PCITSR_BE3 (0x00800000) ++#define MCF_PCITSR_NT (0x01000000) ++ ++/* Bit definitions and macros for MCF_PCITFSR */ ++#define MCF_PCITFSR_EMT (0x00010000) ++#define MCF_PCITFSR_ALARM (0x00020000) ++#define MCF_PCITFSR_FU (0x00040000) ++#define MCF_PCITFSR_FR (0x00080000) ++#define MCF_PCITFSR_OF (0x00100000) ++#define MCF_PCITFSR_UF (0x00200000) ++#define MCF_PCITFSR_RXW (0x00400000) ++ ++/* Bit definitions and macros for MCF_PCITFCR */ ++#define MCF_PCITFCR_OF_MSK (0x00080000) ++#define MCF_PCITFCR_UF_MSK (0x00100000) ++#define MCF_PCITFCR_RXW_MSK (0x00200000) ++#define MCF_PCITFCR_FAE_MSK (0x00400000) ++#define MCF_PCITFCR_IP_MSK (0x00800000) ++#define MCF_PCITFCR_GR(x) (((x)&0x00000007)<<24) ++ ++/* Bit definitions and macros for MCF_PCITFAR */ ++#define MCF_PCITFAR_ALARM(x) (((x)&0x0000007F)<<0) ++ ++/* Bit definitions and macros for MCF_PCITFRPR */ ++#define MCF_PCITFRPR_READ(x) (((x)&0x00000FFF)<<0) ++ ++/* Bit definitions and macros for MCF_PCITFWPR */ ++#define MCF_PCITFWPR_WRITE(x) (((x)&0x00000FFF)<<0) ++ ++/* Bit definitions and macros for MCF_PCIRPSR */ ++#define MCF_PCIRPSR_PKTSIZE(x) (((x)&0x0000FFFF)<<16) ++ ++/* Bit definitions and macros for MCF_PCIRTCR */ ++#define MCF_PCIRTCR_DI (0x00000001) ++#define MCF_PCIRTCR_W (0x00000010) ++#define MCF_PCIRTCR_MAXBEATS(x) (((x)&0x00000007)<<8) ++#define MCF_PCIRTCR_FB (0x00001000) ++#define MCF_PCIRTCR_MAXRETRY(x) (((x)&0x000000FF)<<16) ++#define MCF_PCIRTCR_PCICMD(x) (((x)&0x0000000F)<<24) ++ ++/* Bit definitions and macros for MCF_PCIRER */ ++#define MCF_PCIRER_NE (0x00010000) ++#define MCF_PCIRER_IAE (0x00020000) ++#define MCF_PCIRER_TAE (0x00040000) ++#define MCF_PCIRER_RE (0x00080000) ++#define MCF_PCIRER_SE (0x00100000) ++#define MCF_PCIRER_FEE (0x00200000) ++#define MCF_PCIRER_ME (0x01000000) ++#define MCF_PCIRER_BE (0x08000000) ++#define MCF_PCIRER_CM (0x10000000) ++#define MCF_PCIRER_FE (0x20000000) ++#define MCF_PCIRER_RF (0x40000000) ++#define MCF_PCIRER_RC (0x80000000) ++ ++/* Bit definitions and macros for MCF_PCIRDCR */ ++#define MCF_PCIRDCR_PKTSDONE(x) (((x)&0x0000FFFF)<<0) ++#define MCF_PCIRDCR_BYTESDONE(x) (((x)&0x0000FFFF)<<16) ++ ++/* Bit definitions and macros for MCF_PCIRSR */ ++#define MCF_PCIRSR_IA (0x00010000) ++#define MCF_PCIRSR_TA (0x00020000) ++#define MCF_PCIRSR_RE (0x00040000) ++#define MCF_PCIRSR_SE (0x00080000) ++#define MCF_PCIRSR_FE (0x00100000) ++#define MCF_PCIRSR_BE1 (0x00200000) ++#define MCF_PCIRSR_BE2 (0x00400000) ++#define MCF_PCIRSR_BE3 (0x00800000) ++#define MCF_PCIRSR_NT (0x01000000) ++ ++/* Bit definitions and macros for MCF_PCIRFSR */ ++#define MCF_PCIRFSR_EMT (0x00010000) ++#define MCF_PCIRFSR_ALARM (0x00020000) ++#define MCF_PCIRFSR_FU (0x00040000) ++#define MCF_PCIRFSR_FR (0x00080000) ++#define MCF_PCIRFSR_OF (0x00100000) ++#define MCF_PCIRFSR_UF (0x00200000) ++#define MCF_PCIRFSR_RXW (0x00400000) ++ ++/* Bit definitions and macros for MCF_PCIRFCR */ ++#define MCF_PCIRFCR_OF_MSK (0x00080000) ++#define MCF_PCIRFCR_UF_MSK (0x00100000) ++#define MCF_PCIRFCR_RXW_MSK (0x00200000) ++#define MCF_PCIRFCR_FAE_MSK (0x00400000) ++#define MCF_PCIRFCR_IP_MSK (0x00800000) ++#define MCF_PCIRFCR_GR(x) (((x)&0x00000007)<<24) ++ ++/* Bit definitions and macros for MCF_PCIRFAR */ ++#define MCF_PCIRFAR_ALARM(x) (((x)&0x0000007F)<<0) ++ ++/* Bit definitions and macros for MCF_PCIRFRPR */ ++#define MCF_PCIRFRPR_READ(x) (((x)&0x00000FFF)<<0) ++ ++/* Bit definitions and macros for MCF_PCIRFWPR */ ++#define MCF_PCIRFWPR_WRITE(x) (((x)&0x00000FFF)<<0) ++ ++ ++/* Bit definitions and macros for MCF_PCIARB_PACR */ ++#define MCF_PCIARB_PACR_INTMPRI (0x00000001) ++#define MCF_PCIARB_PACR_EXTMPRI(x) (((x)&0x0000001F)<<1) ++#define MCF_PCIARB_PACR_INTMINTEN (0x00010000) ++#define MCF_PCIARB_PACR_EXTMINTEN(x) (((x)&0x0000001F)<<17) ++#define MCF_PCIARB_PACR_PKMD (0x40000000) ++#define MCF_PCIARB_PACR_DS (0x80000000) ++ ++/* Bit definitions and macros for MCF_PCIARB_PASR */ ++#define MCF_PCIARB_PASR_ITLMBK (0x00010000) ++#define MCF_PCIARB_PASR_EXTMBK(x) (((x)&0x0000001F)<<17) ++ ++#endif /* __MCF548X_PCI_H__ */ +--- /dev/null ++++ b/include/asm-m68k/m5485psc.h +@@ -0,0 +1,474 @@ ++/* ++ * File: mcf548x_psc.h ++ * Purpose: Register and bit definitions for the MCF548X ++ * ++ * Notes: ++ * ++ */ ++ ++#ifndef __MCF548X_PSC_H__ ++#define __MCF548X_PSC_H__ ++ ++/********************************************************************* ++* ++* Programmable Serial Controller (PSC) ++* ++*********************************************************************/ ++ ++/* Register read/write macros */ ++#define MCF_PSC_MR0 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008600)) ++#define MCF_PSC_SR0 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008604)) ++#define MCF_PSC_CSR0 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008604)) ++#define MCF_PSC_CR0 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008608)) ++#define MCF_PSC_RB0 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00860C)) ++#define MCF_PSC_TB0 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00860C)) ++#define MCF_PSC_TB_8BIT0 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00860C)) ++#define MCF_PSC_TB_16BIT0 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00860C)) ++#define MCF_PSC_TB_AC970 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00860C)) ++#define MCF_PSC_IPCR0 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008610)) ++#define MCF_PSC_ACR0 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008610)) ++#define MCF_PSC_ISR0 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008614)) ++#define MCF_PSC_IMR0 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008614)) ++#define MCF_PSC_CTUR0 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008618)) ++#define MCF_PSC_CTLR0 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00861C)) ++#define MCF_PSC_IP0 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008634)) ++#define MCF_PSC_OPSET0 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008638)) ++#define MCF_PSC_OPRESET0 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00863C)) ++#define MCF_PSC_SICR0 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008640)) ++#define MCF_PSC_IRCR10 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008644)) ++#define MCF_PSC_IRCR20 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008648)) ++#define MCF_PSC_IRSDR0 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00864C)) ++#define MCF_PSC_IRMDR0 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008650)) ++#define MCF_PSC_IRFDR0 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008654)) ++#define MCF_PSC_RFCNT0 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008658)) ++#define MCF_PSC_TFCNT0 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00865C)) ++#define MCF_PSC_RFSR0 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008664)) ++#define MCF_PSC_TFSR0 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008684)) ++#define MCF_PSC_RFCR0 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x008668)) ++#define MCF_PSC_TFCR0 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x008688)) ++#define MCF_PSC_RFAR0 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00866E)) ++#define MCF_PSC_TFAR0 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00868E)) ++#define MCF_PSC_RFRP0 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008672)) ++#define MCF_PSC_TFRP0 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008692)) ++#define MCF_PSC_RFWP0 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008676)) ++#define MCF_PSC_TFWP0 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008696)) ++#define MCF_PSC_RLRFP0 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00867A)) ++#define MCF_PSC_TLRFP0 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00869A)) ++#define MCF_PSC_RLWFP0 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00867E)) ++#define MCF_PSC_TLWFP0 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00869E)) ++#define MCF_PSC_MR1 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008700)) ++#define MCF_PSC_SR1 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008704)) ++#define MCF_PSC_CSR1 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008704)) ++#define MCF_PSC_CR1 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008708)) ++#define MCF_PSC_RB1 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00870C)) ++#define MCF_PSC_TB1 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00870C)) ++#define MCF_PSC_TB_8BIT1 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00870C)) ++#define MCF_PSC_TB_16BIT1 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00870C)) ++#define MCF_PSC_TB_AC971 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00870C)) ++#define MCF_PSC_IPCR1 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008710)) ++#define MCF_PSC_ACR1 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008710)) ++#define MCF_PSC_ISR1 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008714)) ++#define MCF_PSC_IMR1 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008714)) ++#define MCF_PSC_CTUR1 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008718)) ++#define MCF_PSC_CTLR1 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00871C)) ++#define MCF_PSC_IP1 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008734)) ++#define MCF_PSC_OPSET1 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008738)) ++#define MCF_PSC_OPRESET1 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00873C)) ++#define MCF_PSC_SICR1 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008740)) ++#define MCF_PSC_IRCR11 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008744)) ++#define MCF_PSC_IRCR21 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008748)) ++#define MCF_PSC_IRSDR1 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00874C)) ++#define MCF_PSC_IRMDR1 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008750)) ++#define MCF_PSC_IRFDR1 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008754)) ++#define MCF_PSC_RFCNT1 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008758)) ++#define MCF_PSC_TFCNT1 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00875C)) ++#define MCF_PSC_RFSR1 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008764)) ++#define MCF_PSC_TFSR1 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008784)) ++#define MCF_PSC_RFCR1 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x008768)) ++#define MCF_PSC_TFCR1 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x008788)) ++#define MCF_PSC_RFAR1 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00876E)) ++#define MCF_PSC_TFAR1 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00878E)) ++#define MCF_PSC_RFRP1 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008772)) ++#define MCF_PSC_TFRP1 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008792)) ++#define MCF_PSC_RFWP1 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008776)) ++#define MCF_PSC_TFWP1 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008796)) ++#define MCF_PSC_RLRFP1 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00877A)) ++#define MCF_PSC_TLRFP1 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00879A)) ++#define MCF_PSC_RLWFP1 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00877E)) ++#define MCF_PSC_TLWFP1 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00879E)) ++#define MCF_PSC_MR2 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008800)) ++#define MCF_PSC_SR2 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008804)) ++#define MCF_PSC_CSR2 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008804)) ++#define MCF_PSC_CR2 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008808)) ++#define MCF_PSC_RB2 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00880C)) ++#define MCF_PSC_TB2 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00880C)) ++#define MCF_PSC_TB_8BIT2 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00880C)) ++#define MCF_PSC_TB_16BIT2 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00880C)) ++#define MCF_PSC_TB_AC972 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00880C)) ++#define MCF_PSC_IPCR2 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008810)) ++#define MCF_PSC_ACR2 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008810)) ++#define MCF_PSC_ISR2 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008814)) ++#define MCF_PSC_IMR2 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008814)) ++#define MCF_PSC_CTUR2 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008818)) ++#define MCF_PSC_CTLR2 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00881C)) ++#define MCF_PSC_IP2 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008834)) ++#define MCF_PSC_OPSET2 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008838)) ++#define MCF_PSC_OPRESET2 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00883C)) ++#define MCF_PSC_SICR2 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008840)) ++#define MCF_PSC_IRCR12 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008844)) ++#define MCF_PSC_IRCR22 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008848)) ++#define MCF_PSC_IRSDR2 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00884C)) ++#define MCF_PSC_IRMDR2 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008850)) ++#define MCF_PSC_IRFDR2 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008854)) ++#define MCF_PSC_RFCNT2 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008858)) ++#define MCF_PSC_TFCNT2 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00885C)) ++#define MCF_PSC_RFSR2 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008864)) ++#define MCF_PSC_TFSR2 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008884)) ++#define MCF_PSC_RFCR2 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x008868)) ++#define MCF_PSC_TFCR2 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x008888)) ++#define MCF_PSC_RFAR2 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00886E)) ++#define MCF_PSC_TFAR2 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00888E)) ++#define MCF_PSC_RFRP2 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008872)) ++#define MCF_PSC_TFRP2 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008892)) ++#define MCF_PSC_RFWP2 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008876)) ++#define MCF_PSC_TFWP2 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008896)) ++#define MCF_PSC_RLRFP2 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00887A)) ++#define MCF_PSC_TLRFP2 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00889A)) ++#define MCF_PSC_RLWFP2 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00887E)) ++#define MCF_PSC_TLWFP2 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00889E)) ++#define MCF_PSC_MR3 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008900)) ++#define MCF_PSC_SR3 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008904)) ++#define MCF_PSC_CSR3 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008904)) ++#define MCF_PSC_CR3 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008908)) ++#define MCF_PSC_RB3 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00890C)) ++#define MCF_PSC_TB3 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00890C)) ++#define MCF_PSC_TB_8BIT3 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00890C)) ++#define MCF_PSC_TB_16BIT3 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00890C)) ++#define MCF_PSC_TB_AC973 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00890C)) ++#define MCF_PSC_IPCR3 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008910)) ++#define MCF_PSC_ACR3 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008910)) ++#define MCF_PSC_ISR3 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008914)) ++#define MCF_PSC_IMR3 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008914)) ++#define MCF_PSC_CTUR3 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008918)) ++#define MCF_PSC_CTLR3 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00891C)) ++#define MCF_PSC_IP3 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008934)) ++#define MCF_PSC_OPSET3 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008938)) ++#define MCF_PSC_OPRESET3 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00893C)) ++#define MCF_PSC_SICR3 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008940)) ++#define MCF_PSC_IRCR13 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008944)) ++#define MCF_PSC_IRCR23 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008948)) ++#define MCF_PSC_IRSDR3 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00894C)) ++#define MCF_PSC_IRMDR3 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008950)) ++#define MCF_PSC_IRFDR3 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008954)) ++#define MCF_PSC_RFCNT3 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008958)) ++#define MCF_PSC_TFCNT3 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00895C)) ++#define MCF_PSC_RFSR3 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008964)) ++#define MCF_PSC_TFSR3 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008984)) ++#define MCF_PSC_RFCR3 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x008968)) ++#define MCF_PSC_TFCR3 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x008988)) ++#define MCF_PSC_RFAR3 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00896E)) ++#define MCF_PSC_TFAR3 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00898E)) ++#define MCF_PSC_RFRP3 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008972)) ++#define MCF_PSC_TFRP3 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008992)) ++#define MCF_PSC_RFWP3 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008976)) ++#define MCF_PSC_TFWP3 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008996)) ++#define MCF_PSC_RLRFP3 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00897A)) ++#define MCF_PSC_TLRFP3 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00899A)) ++#define MCF_PSC_RLWFP3 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00897E)) ++#define MCF_PSC_TLWFP3 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00899E)) ++#define MCF_PSC_MR(x) (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008600+((x)*0x100))) ++#define MCF_PSC_SR(x) (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008604+((x)*0x100))) ++#define MCF_PSC_CSR(x) (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008604+((x)*0x100))) ++#define MCF_PSC_CR(x) (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008608+((x)*0x100))) ++#define MCF_PSC_RB(x) (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00860C+((x)*0x100))) ++#define MCF_PSC_TB(x) (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00860C+((x)*0x100))) ++#define MCF_PSC_TB_8BIT(x) (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00860C+((x)*0x100))) ++#define MCF_PSC_TB_16BIT(x) (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00860C+((x)*0x100))) ++#define MCF_PSC_TB_AC97(x) (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00860C+((x)*0x100))) ++#define MCF_PSC_IPCR(x) (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008610+((x)*0x100))) ++#define MCF_PSC_ACR(x) (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008610+((x)*0x100))) ++#define MCF_PSC_ISR(x) (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008614+((x)*0x100))) ++#define MCF_PSC_IMR(x) (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008614+((x)*0x100))) ++#define MCF_PSC_CTUR(x) (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008618+((x)*0x100))) ++#define MCF_PSC_CTLR(x) (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00861C+((x)*0x100))) ++#define MCF_PSC_IP(x) (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008634+((x)*0x100))) ++#define MCF_PSC_OPSET(x) (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008638+((x)*0x100))) ++#define MCF_PSC_OPRESET(x) (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00863C+((x)*0x100))) ++#define MCF_PSC_SICR(x) (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008640+((x)*0x100))) ++#define MCF_PSC_IRCR1(x) (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008644+((x)*0x100))) ++#define MCF_PSC_IRCR2(x) (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008648+((x)*0x100))) ++#define MCF_PSC_IRSDR(x) (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00864C+((x)*0x100))) ++#define MCF_PSC_IRMDR(x) (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008650+((x)*0x100))) ++#define MCF_PSC_IRFDR(x) (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008654+((x)*0x100))) ++#define MCF_PSC_RFCNT(x) (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008658+((x)*0x100))) ++#define MCF_PSC_TFCNT(x) (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00865C+((x)*0x100))) ++#define MCF_PSC_RFSR(x) (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008664+((x)*0x100))) ++#define MCF_PSC_TFSR(x) (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008684+((x)*0x100))) ++#define MCF_PSC_RFCR(x) (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x008668+((x)*0x100))) ++#define MCF_PSC_TFCR(x) (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x008688+((x)*0x100))) ++#define MCF_PSC_RFAR(x) (*(volatile uint16_t*)(void*)(MCF_MBAR + (0x00866E)+((x)*0x100))) ++#define MCF_PSC_TFAR(x) (*(volatile uint16_t*)(void*)(MCF_MBAR + (0x00868E)+((x)*0x100))) ++#define MCF_PSC_RFRP(x) (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008672+((x)*0x100))) ++#define MCF_PSC_TFRP(x) (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008692+((x)*0x100))) ++#define MCF_PSC_RFWP(x) (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008676+((x)*0x100))) ++#define MCF_PSC_TFWP(x) (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008696+((x)*0x100))) ++#define MCF_PSC_RLRFP(x) (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00867A+((x)*0x100))) ++#define MCF_PSC_TLRFP(x) (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00869A+((x)*0x100))) ++#define MCF_PSC_RLWFP(x) (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00867E+((x)*0x100))) ++#define MCF_PSC_TLWFP(x) (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00869E+((x)*0x100))) ++ ++/* Bit definitions and macros for MCF_PSC_MR */ ++#define MCF_PSC_MR_BC(x) (((x)&0x03)<<0) ++#define MCF_PSC_MR_PT (0x04) ++#define MCF_PSC_MR_PM(x) (((x)&0x03)<<3) ++#define MCF_PSC_MR_ERR (0x20) ++#define MCF_PSC_MR_RXIRQ (0x40) ++#define MCF_PSC_MR_RXRTS (0x80) ++#define MCF_PSC_MR_SB(x) (((x)&0x0F)<<0) ++#define MCF_PSC_MR_TXCTS (0x10) ++#define MCF_PSC_MR_TXRTS (0x20) ++#define MCF_PSC_MR_CM(x) (((x)&0x03)<<6) ++#define MCF_PSC_MR_PM_MULTI_ADDR (0x1C) ++#define MCF_PSC_MR_PM_MULTI_DATA (0x18) ++#define MCF_PSC_MR_PM_NONE (0x10) ++#define MCF_PSC_MR_PM_FORCE_HI (0x0C) ++#define MCF_PSC_MR_PM_FORCE_LO (0x08) ++#define MCF_PSC_MR_PM_ODD (0x04) ++#define MCF_PSC_MR_PM_EVEN (0x00) ++#define MCF_PSC_MR_BC_5 (0x00) ++#define MCF_PSC_MR_BC_6 (0x01) ++#define MCF_PSC_MR_BC_7 (0x02) ++#define MCF_PSC_MR_BC_8 (0x03) ++#define MCF_PSC_MR_CM_NORMAL (0x00) ++#define MCF_PSC_MR_CM_ECHO (0x40) ++#define MCF_PSC_MR_CM_LOCAL_LOOP (0x80) ++#define MCF_PSC_MR_CM_REMOTE_LOOP (0xC0) ++#define MCF_PSC_MR_SB_STOP_BITS_1 (0x07) ++#define MCF_PSC_MR_SB_STOP_BITS_15 (0x08) ++#define MCF_PSC_MR_SB_STOP_BITS_2 (0x0F) ++ ++/* Bit definitions and macros for MCF_PSC_SR */ ++#define MCF_PSC_SR_ERR (0x0040) ++#define MCF_PSC_SR_CDE_DEOF (0x0080) ++#define MCF_PSC_SR_RXRDY (0x0100) ++#define MCF_PSC_SR_FU (0x0200) ++#define MCF_PSC_SR_TXRDY (0x0400) ++#define MCF_PSC_SR_TXEMP_URERR (0x0800) ++#define MCF_PSC_SR_OE (0x1000) ++#define MCF_PSC_SR_PE_CRCERR (0x2000) ++#define MCF_PSC_SR_FE_PHYERR (0x4000) ++#define MCF_PSC_SR_RB_NEOF (0x8000) ++ ++/* Bit definitions and macros for MCF_PSC_CSR */ ++#define MCF_PSC_CSR_TCSEL(x) (((x)&0x0F)<<0) ++#define MCF_PSC_CSR_RCSEL(x) (((x)&0x0F)<<4) ++#define MCF_PSC_CSR_RCSEL_SYS_CLK (0xD0) ++#define MCF_PSC_CSR_RCSEL_CTM16 (0xE0) ++#define MCF_PSC_CSR_RCSEL_CTM (0xF0) ++#define MCF_PSC_CSR_TCSEL_SYS_CLK (0x0D) ++#define MCF_PSC_CSR_TCSEL_CTM16 (0x0E) ++#define MCF_PSC_CSR_TCSEL_CTM (0x0F) ++ ++/* Bit definitions and macros for MCF_PSC_CR */ ++#define MCF_PSC_CR_RXC(x) (((x)&0x03)<<0) ++#define MCF_PSC_CR_TXC(x) (((x)&0x03)<<2) ++#define MCF_PSC_CR_MISC(x) (((x)&0x07)<<4) ++#define MCF_PSC_CR_NONE (0x00) ++#define MCF_PSC_CR_STOP_BREAK (0x70) ++#define MCF_PSC_CR_START_BREAK (0x60) ++#define MCF_PSC_CR_BKCHGINT (0x50) ++#define MCF_PSC_CR_RESET_ERROR (0x40) ++#define MCF_PSC_CR_RESET_TX (0x30) ++#define MCF_PSC_CR_RESET_RX (0x20) ++#define MCF_PSC_CR_RESET_MR (0x10) ++#define MCF_PSC_CR_TX_DISABLED (0x08) ++#define MCF_PSC_CR_TX_ENABLED (0x04) ++#define MCF_PSC_CR_RX_DISABLED (0x02) ++#define MCF_PSC_CR_RX_ENABLED (0x01) ++ ++/* Bit definitions and macros for MCF_PSC_TB_8BIT */ ++#define MCF_PSC_TB_8BIT_TB3(x) (((x)&0x000000FF)<<0) ++#define MCF_PSC_TB_8BIT_TB2(x) (((x)&0x000000FF)<<8) ++#define MCF_PSC_TB_8BIT_TB1(x) (((x)&0x000000FF)<<16) ++#define MCF_PSC_TB_8BIT_TB0(x) (((x)&0x000000FF)<<24) ++ ++/* Bit definitions and macros for MCF_PSC_TB_16BIT */ ++#define MCF_PSC_TB_16BIT_TB1(x) (((x)&0x0000FFFF)<<0) ++#define MCF_PSC_TB_16BIT_TB0(x) (((x)&0x0000FFFF)<<16) ++ ++/* Bit definitions and macros for MCF_PSC_TB_AC97 */ ++#define MCF_PSC_TB_AC97_SOF (0x00000800) ++#define MCF_PSC_TB_AC97_TB(x) (((x)&0x000FFFFF)<<12) ++ ++/* Bit definitions and macros for MCF_PSC_IPCR */ ++#define MCF_PSC_IPCR_RESERVED (0x0C) ++#define MCF_PSC_IPCR_CTS (0x0D) ++#define MCF_PSC_IPCR_D_CTS (0x1C) ++#define MCF_PSC_IPCR_SYNC (0x8C) ++ ++/* Bit definitions and macros for MCF_PSC_ACR */ ++#define MCF_PSC_ACR_IEC0 (0x01) ++#define MCF_PSC_ACR_CTMS(x) (((x)&0x07)<<4) ++#define MCF_PSC_ACR_BRG (0x80) ++ ++/* Bit definitions and macros for MCF_PSC_ISR */ ++#define MCF_PSC_ISR_ERR (0x0040) ++#define MCF_PSC_ISR_DEOF (0x0080) ++#define MCF_PSC_ISR_TXRDY (0x0100) ++#define MCF_PSC_ISR_RXRDY_FU (0x0200) ++#define MCF_PSC_ISR_DB (0x0400) ++#define MCF_PSC_ISR_IPC (0x8000) ++ ++/* Bit definitions and macros for MCF_PSC_IMR */ ++#define MCF_PSC_IMR_ERR (0x0040) ++#define MCF_PSC_IMR_DEOF (0x0080) ++#define MCF_PSC_IMR_TXRDY (0x0100) ++#define MCF_PSC_IMR_RXRDY_FU (0x0200) ++#define MCF_PSC_IMR_DB (0x0400) ++#define MCF_PSC_IMR_IPC (0x8000) ++ ++/* Bit definitions and macros for MCF_PSC_IP */ ++#define MCF_PSC_IP_CTS (0x01) ++#define MCF_PSC_IP_TGL (0x40) ++#define MCF_PSC_IP_LWPR_B (0x80) ++ ++/* Bit definitions and macros for MCF_PSC_OPSET */ ++#define MCF_PSC_OPSET_RTS (0x01) ++ ++/* Bit definitions and macros for MCF_PSC_OPRESET */ ++#define MCF_PSC_OPRESET_RTS (0x01) ++ ++/* Bit definitions and macros for MCF_PSC_SICR */ ++#define MCF_PSC_SICR_SIM(x) (((x)&0x07)<<0) ++#define MCF_PSC_SICR_SHDIR (0x10) ++#define MCF_PSC_SICR_DTS (0x20) ++#define MCF_PSC_SICR_AWR (0x40) ++#define MCF_PSC_SICR_ACRB (0x80) ++#define MCF_PSC_SICR_SIM_UART (0x00) ++#define MCF_PSC_SICR_SIM_MODEM8 (0x01) ++#define MCF_PSC_SICR_SIM_MODEM16 (0x02) ++#define MCF_PSC_SICR_SIM_AC97 (0x03) ++#define MCF_PSC_SICR_SIM_SIR (0x04) ++#define MCF_PSC_SICR_SIM_MIR (0x05) ++#define MCF_PSC_SICR_SIM_FIR (0x06) ++ ++/* Bit definitions and macros for MCF_PSC_IRCR1 */ ++#define MCF_PSC_IRCR1_SPUL (0x01) ++#define MCF_PSC_IRCR1_SIPEN (0x02) ++#define MCF_PSC_IRCR1_FD (0x04) ++ ++/* Bit definitions and macros for MCF_PSC_IRCR2 */ ++#define MCF_PSC_IRCR2_NXTEOF (0x01) ++#define MCF_PSC_IRCR2_ABORT (0x02) ++#define MCF_PSC_IRCR2_SIPREQ (0x04) ++ ++/* Bit definitions and macros for MCF_PSC_IRMDR */ ++#define MCF_PSC_IRMDR_M_FDIV(x) (((x)&0x7F)<<0) ++#define MCF_PSC_IRMDR_FREQ (0x80) ++ ++/* Bit definitions and macros for MCF_PSC_IRFDR */ ++#define MCF_PSC_IRFDR_F_FDIV(x) (((x)&0x0F)<<0) ++ ++/* Bit definitions and macros for MCF_PSC_RFCNT */ ++#define MCF_PSC_RFCNT_CNT(x) (((x)&0x01FF)<<0) ++ ++/* Bit definitions and macros for MCF_PSC_TFCNT */ ++#define MCF_PSC_TFCNT_CNT(x) (((x)&0x01FF)<<0) ++ ++/* Bit definitions and macros for MCF_PSC_RFSR */ ++#define MCF_PSC_RFSR_EMT (0x0001) ++#define MCF_PSC_RFSR_ALARM (0x0002) ++#define MCF_PSC_RFSR_FU (0x0004) ++#define MCF_PSC_RFSR_FRMRY (0x0008) ++#define MCF_PSC_RFSR_OF (0x0010) ++#define MCF_PSC_RFSR_UF (0x0020) ++#define MCF_PSC_RFSR_RXW (0x0040) ++#define MCF_PSC_RFSR_FAE (0x0080) ++#define MCF_PSC_RFSR_FRM(x) (((x)&0x000F)<<8) ++#define MCF_PSC_RFSR_TAG (0x1000) ++#define MCF_PSC_RFSR_TXW (0x4000) ++#define MCF_PSC_RFSR_IP (0x8000) ++#define MCF_PSC_RFSR_FRM_BYTE0 (0x0800) ++#define MCF_PSC_RFSR_FRM_BYTE1 (0x0400) ++#define MCF_PSC_RFSR_FRM_BYTE2 (0x0200) ++#define MCF_PSC_RFSR_FRM_BYTE3 (0x0100) ++ ++/* Bit definitions and macros for MCF_PSC_TFSR */ ++#define MCF_PSC_TFSR_EMT (0x0001) ++#define MCF_PSC_TFSR_ALARM (0x0002) ++#define MCF_PSC_TFSR_FU (0x0004) ++#define MCF_PSC_TFSR_FRMRY (0x0008) ++#define MCF_PSC_TFSR_OF (0x0010) ++#define MCF_PSC_TFSR_UF (0x0020) ++#define MCF_PSC_TFSR_RXW (0x0040) ++#define MCF_PSC_TFSR_FAE (0x0080) ++#define MCF_PSC_TFSR_FRM(x) (((x)&0x000F)<<8) ++#define MCF_PSC_TFSR_TAG (0x1000) ++#define MCF_PSC_TFSR_TXW (0x4000) ++#define MCF_PSC_TFSR_IP (0x8000) ++#define MCF_PSC_TFSR_FRM_BYTE0 (0x0800) ++#define MCF_PSC_TFSR_FRM_BYTE1 (0x0400) ++#define MCF_PSC_TFSR_FRM_BYTE2 (0x0200) ++#define MCF_PSC_TFSR_FRM_BYTE3 (0x0100) ++ ++/* Bit definitions and macros for MCF_PSC_RFCR */ ++#define MCF_PSC_RFCR_CNTR(x) (((x)&0x0000FFFF)<<0) ++#define MCF_PSC_RFCR_TXW_MSK (0x00040000) ++#define MCF_PSC_RFCR_OF_MSK (0x00080000) ++#define MCF_PSC_RFCR_UF_MSK (0x00100000) ++#define MCF_PSC_RFCR_RXW_MSK (0x00200000) ++#define MCF_PSC_RFCR_FAE_MSK (0x00400000) ++#define MCF_PSC_RFCR_IP_MSK (0x00800000) ++#define MCF_PSC_RFCR_GR(x) (((x)&0x00000007)<<24) ++#define MCF_PSC_RFCR_FRMEN (0x08000000) ++#define MCF_PSC_RFCR_TIMER (0x10000000) ++#define MCF_PSC_RFCR_WRITETAG (0x20000000) ++#define MCF_PSC_RFCR_SHADOW (0x80000000) ++ ++/* Bit definitions and macros for MCF_PSC_TFCR */ ++#define MCF_PSC_TFCR_CNTR(x) (((x)&0x0000FFFF)<<0) ++#define MCF_PSC_TFCR_TXW_MSK (0x00040000) ++#define MCF_PSC_TFCR_OF_MSK (0x00080000) ++#define MCF_PSC_TFCR_UF_MSK (0x00100000) ++#define MCF_PSC_TFCR_RXW_MSK (0x00200000) ++#define MCF_PSC_TFCR_FAE_MSK (0x00400000) ++#define MCF_PSC_TFCR_IP_MSK (0x00800000) ++#define MCF_PSC_TFCR_GR(x) (((x)&0x00000007)<<24) ++#define MCF_PSC_TFCR_FRMEN (0x08000000) ++#define MCF_PSC_TFCR_TIMER (0x10000000) ++#define MCF_PSC_TFCR_WRITETAG (0x20000000) ++#define MCF_PSC_TFCR_SHADOW (0x80000000) ++ ++/* Bit definitions and macros for MCF_PSC_RFAR */ ++#define MCF_PSC_RFAR_ALARM(x) (((x)&0x01FF)<<0) ++ ++/* Bit definitions and macros for MCF_PSC_TFAR */ ++#define MCF_PSC_TFAR_ALARM(x) (((x)&0x01FF)<<0) ++ ++/* Bit definitions and macros for MCF_PSC_RFRP */ ++#define MCF_PSC_RFRP_READ(x) (((x)&0x01FF)<<0) ++ ++/* Bit definitions and macros for MCF_PSC_TFRP */ ++#define MCF_PSC_TFRP_READ(x) (((x)&0x01FF)<<0) ++ ++/* Bit definitions and macros for MCF_PSC_RFWP */ ++#define MCF_PSC_RFWP_WRITE(x) (((x)&0x01FF)<<0) ++ ++/* Bit definitions and macros for MCF_PSC_TFWP */ ++#define MCF_PSC_TFWP_WRITE(x) (((x)&0x01FF)<<0) ++ ++/* Bit definitions and macros for MCF_PSC_RLRFP */ ++#define MCF_PSC_RLRFP_LFP(x) (((x)&0x01FF)<<0) ++ ++/* Bit definitions and macros for MCF_PSC_TLRFP */ ++#define MCF_PSC_TLRFP_LFP(x) (((x)&0x01FF)<<0) ++ ++/* Bit definitions and macros for MCF_PSC_RLWFP */ ++#define MCF_PSC_RLWFP_LFP(x) (((x)&0x01FF)<<0) ++ ++/* Bit definitions and macros for MCF_PSC_TLWFP */ ++#define MCF_PSC_TLWFP_LFP(x) (((x)&0x01FF)<<0) ++ ++/********************************************************************/ ++ ++#endif /* __MCF548X_PSC_H__ */ +--- /dev/null ++++ b/include/asm-m68k/m5485sim.h +@@ -0,0 +1,221 @@ ++/* ++ * m5485sim.h -- ColdFire 547x/548x System Integration Unit support. ++ */ ++ ++#ifndef m5485sim_h ++#define m5485sim_h ++ ++ ++/* ++ * System Integration Unit Registers ++ */ ++#define MCF_SDRAMDS MCF_REG32(0x000004) /* SDRAM Drive Strength */ ++#define MCF_SBCR MCF_REG32(0x000010) /* System Breakpoint Control */ ++#define MCF_CSnCFG(x) MCF_REG32(0x000020+(x*4))/* SDRAM Chip Select X */ ++#define MCF_SECSACR MCF_REG32(0x000038) /* Sequential Access Control */ ++#define MCF_RSR MCF_REG32(0x000044) /* Reset Status */ ++#define MCF_JTAGID MCF_REG32(0x000050) /* JTAG Device Identification */ ++ ++/* ++ * FlexBus Chip Selects Registers ++ */ ++#define MCF_CSARn(x) MCF_REG32(0x000500+(x*0xC)) ++#define MCF_CSMRn(x) MCF_REG32(0x000504+(x*0xC)) ++#define MCF_CSCRn(x) MCF_REG32(0x000508+(x*0xC)) ++ ++/* ++ * Interrupt Controller Registers ++ */ ++#define MCF_IPRH MCF_REG32(0x000700) ++#define MCF_IPRL MCF_REG32(0x000704) ++#define MCF_IMRH MCF_REG32(0x000708) ++#define MCF_IMRL MCF_REG32(0x00070C) ++#define MCF_INTFRCH MCF_REG32(0x000710) ++#define MCF_INTFRCL MCF_REG32(0x000714) ++#define MCF_IRLR MCF_REG08(0x000718) ++#define MCF_IACKLPR MCF_REG08(0x000719) ++#define MCF_SWIACK MCF_REG08(0x0007E0) ++#define MCF_LnIACK(x) MCF_REG08(0x0007E4+((x)*0x004)) ++#define MCF_ICR(x) MCF_REG08(0x000740+((x)*0x001)) ++ ++/* ++ * Slice Timers Registers ++ */ ++#define MCF_SLTCNT(x) MCF_REG32(0x000900+((x)*0x010)) ++#define MCF_SCR(x) MCF_REG32(0x000904+((x)*0x010)) ++#define MCF_SCNT(x) MCF_REG32(0x000908+((x)*0x010)) ++#define MCF_SSR(x) MCF_REG32(0x00090C+((x)*0x010)) ++ ++/* ++ * Interrupt sources ++ */ ++#define ISC_EPORT_Fn(x) (x) /* EPORT Interrupts */ ++#define ISC_USB_EPn(x) (15+(x)) /* USB Endopint */ ++#define ISC_USB_ISR (22) /* USB General source */ ++#define ISC_USB_AISR (22) /* USB core source */ ++#define ISC_DSPI_OVRFW (25) /* DSPI overflow */ ++#define ISC_DSPI_RFOF (26) ++#define ISC_DSPI_RFDF (27) ++#define ISC_DSPI_TFUF (28) ++#define ISC_DSPI_TCF (29) ++#define ISC_DSPI_TFFF (30) ++#define ISC_DSPI_EOQF (31) ++#define ISC_PSCn(x) (35-(x)) ++#define ISC_COMM_TIM (36) ++#define ISC_SEC (37) ++#define ISC_FEC1 (38) ++#define ISC_FEC0 (39) ++#define ISC_I2C (40) ++#define ISC_PCI_ARB (41) ++#define ISC_PCI_CB (42) ++#define ISC_PCI_XLB (43) ++#define ISC_DMA (48) ++#define ISC_CANn_ERR(x) (49+(6*(x))) ++#define ISC_CANn_BUSOFF(x) (50+(6*(x))) ++#define ISC_CANn_MBOR(x) (51+(6*(x))) ++#define ISC_CAN0_WAKEIN (52) ++#define ISC_SLTn(x) (54-(x)) ++#define ISC_GPTn(x) (62-(x)) ++ ++/* ++ * Interrupt level and priorities ++ */ ++#define ILP_TOP (MCF_ICR_IL(5) | MCF_ICR_IP(3)) ++#define ILP_SLT0 (MCF_ICR_IL(5) | MCF_ICR_IP(2)) ++#define ILP_SLT1 (MCF_ICR_IL(5) | MCF_ICR_IP(1)) ++#define ILP_DMA (MCF_ICR_IL(5) | MCF_ICR_IP(0)) ++#define ILP_SEC (MCF_ICR_IL(4) | MCF_ICR_IP(7)) ++#define ILP_FEC0 (MCF_ICR_IL(4) | MCF_ICR_IP(6)) ++#define ILP_FEC1 (MCF_ICR_IL(4) | MCF_ICR_IP(5)) ++#define ILP_PCI_XLB (MCF_ICR_IL(4) | MCF_ICR_IP(4)) ++#define ILP_PCI_ARB (MCF_ICR_IL(4) | MCF_ICR_IP(3)) ++#define ILP_PCI_CB (MCF_ICR_IL(4) | MCF_ICR_IP(2)) ++#define ILP_I2C (MCF_ICR_IL(4) | MCF_ICR_IP(1)) ++ ++#define ILP_USB_EPn(x) (MCF_ICR_IL(3) | MCF_ICR_IP(7-(x))) ++#define ILP_USB_EP0 (MCF_ICR_IL(3) | MCF_ICR_IP(7)) ++#define ILP_USB_EP1 (MCF_ICR_IL(3) | MCF_ICR_IP(6)) ++#define ILP_USB_EP2 (MCF_ICR_IL(3) | MCF_ICR_IP(5)) ++#define ILP_USB_EP3 (MCF_ICR_IL(3) | MCF_ICR_IP(4)) ++#define ILP_USB_EP4 (MCF_ICR_IL(3) | MCF_ICR_IP(3)) ++#define ILP_USB_EP5 (MCF_ICR_IL(3) | MCF_ICR_IP(2)) ++#define ILP_USB_EP6 (MCF_ICR_IL(3) | MCF_ICR_IP(1)) ++#define ILP_USB_ISR (MCF_ICR_IL(3) | MCF_ICR_IP(0)) ++ ++#define ILP_USB_AISR (MCF_ICR_IL(2) | MCF_ICR_IP(7)) ++#define ILP_DSPI_OVRFW (MCF_ICR_IL(2) | MCF_ICR_IP(6)) ++#define ILP_DSPI_RFOF (MCF_ICR_IL(2) | MCF_ICR_IP(5)) ++#define ILP_DSPI_RFDF (MCF_ICR_IL(2) | MCF_ICR_IP(4)) ++#define ILP_DSPI_TFUF (MCF_ICR_IL(2) | MCF_ICR_IP(3)) ++#define ILP_DSPI_TCF (MCF_ICR_IL(2) | MCF_ICR_IP(2)) ++#define ILP_DSPI_TFFF (MCF_ICR_IL(2) | MCF_ICR_IP(1)) ++#define ILP_DSPI_EOQF (MCF_ICR_IL(2) | MCF_ICR_IP(0)) ++ ++#define ILP_COMM_TIM (MCF_ICR_IL(1) | MCF_ICR_IP(7)) ++#define ILP_PSCn(x) (MCF_ICR_IL(1) | MCF_ICR_IP(3-((x)&3))) ++#define ILP_PSC0 (MCF_ICR_IL(1) | MCF_ICR_IP(3)) ++#define ILP_PSC1 (MCF_ICR_IL(1) | MCF_ICR_IP(2)) ++#define ILP_PSC2 (MCF_ICR_IL(1) | MCF_ICR_IP(1)) ++#define ILP_PSC3 (MCF_ICR_IL(1) | MCF_ICR_IP(0)) ++ ++ ++ ++ ++ ++/********************************************************************/ ++ ++/* ++ * System Integration Unit Bitfields ++ */ ++ ++/* SBCR */ ++#define MCF_SBCR_PIN2DSPI (0x08000000) ++#define MCF_SBCR_DMA2CPU (0x10000000) ++#define MCF_SBCR_CPU2DMA (0x20000000) ++#define MCF_SBCR_PIN2DMA (0x40000000) ++#define MCF_SBCR_PIN2CPU (0x80000000) ++ ++/* SECSACR */ ++#define MCF_SECSACR_SEQEN (0x00000001) ++ ++/* RSR */ ++#define MCF_RSR_RST (0x00000001) ++#define MCF_RSR_RSTWD (0x00000002) ++#define MCF_RSR_RSTJTG (0x00000008) ++ ++/* JTAGID */ ++#define MCF_JTAGID_REV (0xF0000000) ++#define MCF_JTAGID_PROCESSOR (0x0FFFFFFF) ++#define MCF_JTAGID_MCF5485 (0x0800C01D) ++#define MCF_JTAGID_MCF5484 (0x0800D01D) ++#define MCF_JTAGID_MCF5483 (0x0800E01D) ++#define MCF_JTAGID_MCF5482 (0x0800F01D) ++#define MCF_JTAGID_MCF5481 (0x0801001D) ++#define MCF_JTAGID_MCF5480 (0x0801101D) ++#define MCF_JTAGID_MCF5475 (0x0801201D) ++#define MCF_JTAGID_MCF5474 (0x0801301D) ++#define MCF_JTAGID_MCF5473 (0x0801401D) ++#define MCF_JTAGID_MCF5472 (0x0801501D) ++#define MCF_JTAGID_MCF5471 (0x0801601D) ++#define MCF_JTAGID_MCF5470 (0x0801701D) ++ ++ ++/* ++ * Interrupt Controller Bitfields ++ */ ++#define MCF_IRLR_IRQ(x) (((x)&0x7F)<<1) ++#define MCF_IACKLPR_PRI(x) (((x)&0x0F)<<0) ++#define MCF_IACKLPR_LEVEL(x) (((x)&0x07)<<4) ++#define MCF_ICR_IP(x) (((x)&0x07)<<0) ++#define MCF_ICR_IL(x) (((x)&0x07)<<3) ++ ++/* ++ * Slice Timers Bitfields ++ */ ++#define MCF_SCR_TEN (0x01000000) ++#define MCF_SCR_IEN (0x02000000) ++#define MCF_SCR_RUN (0x04000000) ++#define MCF_SSR_ST (0x01000000) ++#define MCF_SSR_BE (0x02000000) ++ ++ ++/* ++ * Some needed coldfire registers ++ */ ++#define MCF_PAR_PCIBG MCF_REG16(0x000A48) ++#define MCF_PAR_PCIBR MCF_REG16(0x000A4A) ++#define MCF_PAR_PSCn(x) MCF_REG08(0x000A4F-((x)&0x3)) ++#define MCF_PAR_FECI2CIRQ MCF_REG16(0x000A44) ++#define MCF_PAR_DSPI MCF_REG16(0x000A50) ++#define MCF_PAR_TIMER MCF_REG08(0X000A52) ++#define MCF_EPPAR MCF_REG16(0x000F00) ++#define MCF_EPIER MCF_REG08(0x000F05) ++#define MCF_EPFR MCF_REG08(0x000F0C) ++ ++/* ++ * Some GPIO bitfields ++ */ ++#define MCF_PAR_SDA (0x0008) ++#define MCF_PAR_SCL (0x0004) ++#define MCF_PAR_PSC_TXD (0x04) ++#define MCF_PAR_PSC_RXD (0x08) ++#define MCF_PAR_PSC_RTS(x) (((x)&0x03)<<4) ++#define MCF_PAR_PSC_CTS(x) (((x)&0x03)<<6) ++#define MCF_PAR_PSC_CTS_GPIO (0x00) ++#define MCF_PAR_PSC_CTS_BCLK (0x80) ++#define MCF_PAR_PSC_CTS_CTS (0xC0) ++#define MCF_PAR_PSC_RTS_GPIO (0x00) ++#define MCF_PAR_PSC_RTS_FSYNC (0x20) ++#define MCF_PAR_PSC_RTS_RTS (0x30) ++#define MCF_PAR_PSC_CANRX (0x40) ++ ++ ++/* ++ * Some used coldfire values ++ */ ++#define MCF_EPIER_EPIE(x) (0x01 << (x)) ++#define MCF_EPPAR_EPPAx_FALLING (2) ++#define MCF_EPPAR_EPPA(n,x) (((x)&0x0003) << (2*n)) ++ ++ ++#endif /* m5485sim_h */ +--- /dev/null ++++ b/include/asm-m68k/m5485sram.h +@@ -0,0 +1,12 @@ ++#ifndef SYS_SRAM_H ++#define SYS_SRAM_H ++ ++ ++#define SYS_SRAM_DMA_START MCF_MBAR + 0x10000 ++#define SYS_SRAM_DMA_SIZE 8192 ++#define SYS_SRAM_FEC_START SYS_SRAM_DMA_START + SYS_SRAM_DMA_SIZE ++#define SYS_SRAM_FEC_SIZE 2048 ++#define SYS_SRAM_SEC_START SYS_SRAM_FEC_START + SYS_SRAM_FEC_SIZE ++#define SYS_SRAM_SEC_SIZE 1280 ++ ++#endif /* SYS_SRAM_H */ +--- a/include/asm-m68k/machdep.h ++++ b/include/asm-m68k/machdep.h +@@ -32,4 +32,11 @@ extern void (*mach_heartbeat) (int); + extern void (*mach_l2_flush) (int); + extern void (*mach_beep) (unsigned int, unsigned int); + ++#ifdef CONFIG_COLDFIRE ++extern void __init config_coldfire(void); ++extern void __init mmu_context_init(void); ++extern irq_handler_t mach_default_handler; ++extern void (*mach_tick)(void); ++#endif ++ + #endif /* _M68K_MACHDEP_H */ +--- /dev/null ++++ b/include/asm-m68k/MCD_dma.h +@@ -0,0 +1,408 @@ ++/********************************************************************* ++ * ++ * Copyright (C) 2004 Motorola, Inc. ++ * MOTOROLA, INC. All Rights Reserved. ++ * You are hereby granted a copyright license to use ++ * the SOFTWARE so long as this entire notice is ++ * retained without alteration in any modified and/or redistributed ++ * versions, and that such modified versions are clearly identified ++ * as such. No licenses are granted by implication, estoppel or ++ * otherwise under any patents or trademarks of Motorola, Inc. This ++ * software is provided on an "AS IS" basis and without warranty. ++ * ++ * To the maximum extent permitted by applicable law, MOTOROLA ++ * DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING ++ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR ++ * PURPOSE AND ANY WARRANTY AGAINST INFRINGEMENT WITH REGARD TO THE ++ * SOFTWARE (INCLUDING ANY MODIFIED VERSIONS THEREOF) AND ANY ++ * ACCOMPANYING WRITTEN MATERIALS. ++ * ++ * To the maximum extent permitted by applicable law, IN NO EVENT ++ * SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING ++ * WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS ++ * INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY ++ * LOSS) ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE. ++ * ++ * Motorola assumes no responsibility for the maintenance and support ++ * of this software ++ ********************************************************************/ ++ ++/* ++ * File: MCD_dma.h ++ * Purpose: Main header file for multi-channel DMA API. ++ * ++ * Notes: ++ * ++ * Modifications: ++ */ ++#ifndef _MCD_API_H ++#define _MCD_API_H ++ ++#include <asm/types.h> ++ ++/* ++ * Turn Execution Unit tasks ON (#define) or OFF (#undef) ++ */ ++#undef MCD_INCLUDE_EU ++ ++/* ++ * Number of DMA channels ++ */ ++#define NCHANNELS 16 ++ ++/* ++ * Total number of variants ++ */ ++#ifdef MCD_INCLUDE_EU ++#define NUMOFVARIANTS 6 ++#else ++#define NUMOFVARIANTS 4 ++#endif ++ ++/* ++ * Define sizes of the various tables ++ */ ++#define TASK_TABLE_SIZE (NCHANNELS*32) ++#define VAR_TAB_SIZE (128) ++#define CONTEXT_SAVE_SIZE (128) ++#define FUNCDESC_TAB_SIZE (256) ++ ++#ifdef MCD_INCLUDE_EU ++#define FUNCDESC_TAB_NUM 16 ++#else ++#define FUNCDESC_TAB_NUM 1 ++#endif ++ ++ ++#ifndef DEFINESONLY ++ ++/* ++ * Portability typedefs ++ */ ++ /* ++#ifndef s32 ++typedef int s32; ++#endif ++#ifndef u32 ++typedef unsigned int u32; ++#endif ++#ifndef s16 ++typedef short s16; ++#endif ++#ifndef u16 ++typedef unsigned short u16; ++#endif ++#ifndef s8 ++typedef char s8; ++#endif ++#ifndef u8 ++typedef unsigned char u8; ++#endif ++*/ ++/* ++ * These structures represent the internal registers of the ++ * multi-channel DMA ++ */ ++struct dmaRegs_s { ++ u32 taskbar; /* task table base address register */ ++ u32 currPtr; ++ u32 endPtr; ++ u32 varTablePtr; ++ u16 dma_rsvd0; ++ u16 ptdControl; /* ptd control */ ++ u32 intPending; /* interrupt pending register */ ++ u32 intMask; /* interrupt mask register */ ++ u16 taskControl[16]; /* task control registers */ ++ u8 priority[32]; /* priority registers */ ++ u32 initiatorMux; /* initiator mux control */ ++ u32 taskSize0; /* task size control register 0. */ ++ u32 taskSize1; /* task size control register 1. */ ++ u32 dma_rsvd1; /* reserved */ ++ u32 dma_rsvd2; /* reserved */ ++ u32 debugComp1; /* debug comparator 1 */ ++ u32 debugComp2; /* debug comparator 2 */ ++ u32 debugControl; /* debug control */ ++ u32 debugStatus; /* debug status */ ++ u32 ptdDebug; /* priority task decode debug */ ++ u32 dma_rsvd3[31]; /* reserved */ ++}; ++typedef volatile struct dmaRegs_s dmaRegs; ++ ++#endif ++ ++/* ++ * PTD contrl reg bits ++ */ ++#define PTD_CTL_TSK_PRI 0x8000 ++#define PTD_CTL_COMM_PREFETCH 0x0001 ++ ++/* ++ * Task Control reg bits and field masks ++ */ ++#define TASK_CTL_EN 0x8000 ++#define TASK_CTL_VALID 0x4000 ++#define TASK_CTL_ALWAYS 0x2000 ++#define TASK_CTL_INIT_MASK 0x1f00 ++#define TASK_CTL_ASTRT 0x0080 ++#define TASK_CTL_HIPRITSKEN 0x0040 ++#define TASK_CTL_HLDINITNUM 0x0020 ++#define TASK_CTL_ASTSKNUM_MASK 0x000f ++ ++/* ++ * Priority reg bits and field masks ++ */ ++#define PRIORITY_HLD 0x80 ++#define PRIORITY_PRI_MASK 0x07 ++ ++/* ++ * Debug Control reg bits and field masks ++ */ ++#define DBG_CTL_BLOCK_TASKS_MASK 0xffff0000 ++#define DBG_CTL_AUTO_ARM 0x00008000 ++#define DBG_CTL_BREAK 0x00004000 ++#define DBG_CTL_COMP1_TYP_MASK 0x00003800 ++#define DBG_CTL_COMP2_TYP_MASK 0x00000070 ++#define DBG_CTL_EXT_BREAK 0x00000004 ++#define DBG_CTL_INT_BREAK 0x00000002 ++ ++/* ++ * PTD Debug reg selector addresses ++ * This reg must be written with a value to show the contents of ++ * one of the desired internal register. ++ */ ++#define PTD_DBG_REQ 0x00 /* shows the state of 31 initiators */ ++#define PTD_DBG_TSK_VLD_INIT 0x01 /* shows which 16 tasks are valid and ++ have initiators asserted */ ++ ++ ++/* ++ * General return values ++ */ ++#define MCD_OK 0 ++#define MCD_ERROR -1 ++#define MCD_TABLE_UNALIGNED -2 ++#define MCD_CHANNEL_INVALID -3 ++ ++/* ++ * MCD_initDma input flags ++ */ ++#define MCD_RELOC_TASKS 0x00000001 ++#define MCD_NO_RELOC_TASKS 0x00000000 ++#define MCD_COMM_PREFETCH_EN 0x00000002 /* Commbus Prefetching - MCF547x/548x ONLY */ ++ ++/* ++ * MCD_dmaStatus Status Values for each channel ++ */ ++#define MCD_NO_DMA 1 /* No DMA has been requested since reset */ ++#define MCD_IDLE 2 /* DMA active, but the initiator is currently inactive */ ++#define MCD_RUNNING 3 /* DMA active, and the initiator is currently active */ ++#define MCD_PAUSED 4 /* DMA active but it is currently paused */ ++#define MCD_HALTED 5 /* the most recent DMA has been killed with MCD_killTask() */ ++#define MCD_DONE 6 /* the most recent DMA has completed. */ ++ ++ ++/* ++ * MCD_startDma parameter defines ++ */ ++ ++/* ++ * Constants for the funcDesc parameter ++ */ ++/* Byte swapping: */ ++#define MCD_NO_BYTE_SWAP 0x00045670 /* to disable byte swapping. */ ++#define MCD_BYTE_REVERSE 0x00076540 /* to reverse the bytes of each u32 of the DMAed data. */ ++#define MCD_U16_REVERSE 0x00067450 /* to reverse the 16-bit halves of ++ each 32-bit data value being DMAed.*/ ++#define MCD_U16_BYTE_REVERSE 0x00054760 /* to reverse the byte halves of each ++ 16-bit half of each 32-bit data value DMAed */ ++#define MCD_NO_BIT_REV 0x00000000 /* do not reverse the bits of each byte DMAed. */ ++#define MCD_BIT_REV 0x00088880 /* reverse the bits of each byte DMAed */ ++/* CRCing: */ ++#define MCD_CRC16 0xc0100000 /* to perform CRC-16 on DMAed data. */ ++#define MCD_CRCCCITT 0xc0200000 /* to perform CRC-CCITT on DMAed data. */ ++#define MCD_CRC32 0xc0300000 /* to perform CRC-32 on DMAed data. */ ++#define MCD_CSUMINET 0xc0400000 /* to perform internet checksums on DMAed data.*/ ++#define MCD_NO_CSUM 0xa0000000 /* to perform no checksumming. */ ++ ++#define MCD_FUNC_NOEU1 (MCD_NO_BYTE_SWAP | MCD_NO_BIT_REV | MCD_NO_CSUM) ++#define MCD_FUNC_NOEU2 (MCD_NO_BYTE_SWAP | MCD_NO_CSUM) ++ ++/* ++ * Constants for the flags parameter ++ */ ++#define MCD_TT_FLAGS_RL 0x00000001 /* Read line */ ++#define MCD_TT_FLAGS_CW 0x00000002 /* Combine Writes */ ++#define MCD_TT_FLAGS_SP 0x00000004 /* Speculative prefetch(XLB) MCF547x/548x ONLY */ ++#define MCD_TT_FLAGS_MASK 0x000000ff ++#define MCD_TT_FLAGS_DEF (MCD_TT_FLAGS_RL | MCD_TT_FLAGS_CW) ++ ++#define MCD_SINGLE_DMA 0x00000100 /* Unchained DMA */ ++#define MCD_CHAIN_DMA /* TBD */ ++#define MCD_EU_DMA /* TBD */ ++#define MCD_FECTX_DMA 0x00001000 /* FEC TX ring DMA */ ++#define MCD_FECRX_DMA 0x00002000 /* FEC RX ring DMA */ ++ ++ ++/* these flags are valid for MCD_startDma and the chained buffer descriptors */ ++#define MCD_BUF_READY 0x80000000 /* indicates that this buffer is now under the DMA's control */ ++#define MCD_WRAP 0x20000000 /* to tell the FEC Dmas to wrap to the first BD */ ++#define MCD_INTERRUPT 0x10000000 /* to generate an interrupt after completion of the DMA. */ ++#define MCD_END_FRAME 0x08000000 /* tell the DMA to end the frame when transferring ++ last byte of data in buffer */ ++#define MCD_CRC_RESTART 0x40000000 /* to empty out the accumulated checksum ++ prior to performing the DMA. */ ++ ++/* Defines for the FEC buffer descriptor control/status word*/ ++#define MCD_FEC_BUF_READY 0x8000 ++#define MCD_FEC_WRAP 0x2000 ++#define MCD_FEC_INTERRUPT 0x1000 ++#define MCD_FEC_END_FRAME 0x0800 ++ ++ ++/* ++ * Defines for general intuitiveness ++ */ ++ ++#define MCD_TRUE 1 ++#define MCD_FALSE 0 ++ ++/* ++ * Three different cases for destination and source. ++ */ ++#define MINUS1 -1 ++#define ZERO 0 ++#define PLUS1 1 ++ ++#ifndef DEFINESONLY ++ ++/* Task Table Entry struct*/ ++typedef struct { ++ u32 TDTstart; /* task descriptor table start */ ++ u32 TDTend; /* task descriptor table end */ ++ u32 varTab; /* variable table start */ ++ u32 FDTandFlags; /* function descriptor table start and flags */ ++ volatile u32 descAddrAndStatus; ++ volatile u32 modifiedVarTab; ++ u32 contextSaveSpace; /* context save space start */ ++ u32 literalBases; ++} TaskTableEntry; ++ ++ ++/* Chained buffer descriptor */ ++typedef volatile struct MCD_bufDesc_struct MCD_bufDesc; ++struct MCD_bufDesc_struct { ++ u32 flags; /* flags describing the DMA */ ++ u32 csumResult; /* checksum from checksumming performed since last checksum reset */ ++ s8 *srcAddr; /* the address to move data from */ ++ s8 *destAddr; /* the address to move data to */ ++ s8 *lastDestAddr; /* the last address written to */ ++ u32 dmaSize; /* the number of bytes to transfer independent of the transfer size */ ++ MCD_bufDesc *next; /* next buffer descriptor in chain */ ++ u32 info; /* private information about this descriptor; DMA does not affect it */ ++}; ++ ++/* Progress Query struct */ ++typedef volatile struct MCD_XferProg_struct { ++ s8 *lastSrcAddr; /* the most-recent or last, post-increment source address */ ++ s8 *lastDestAddr; /* the most-recent or last, post-increment destination address */ ++ u32 dmaSize; /* the amount of data transferred for the current buffer */ ++ MCD_bufDesc *currBufDesc;/* pointer to the current buffer descriptor being DMAed */ ++} MCD_XferProg; ++ ++ ++/* FEC buffer descriptor */ ++typedef volatile struct MCD_bufDescFec_struct { ++ u16 statCtrl; ++ u16 length; ++ u32 dataPointer; ++} MCD_bufDescFec; ++ ++ ++/*************************************************************************/ ++/* ++ * API function Prototypes - see MCD_dmaApi.c for further notes ++ */ ++ ++/* ++ * MCD_startDma starts a particular kind of DMA . ++ */ ++int MCD_startDma ( ++ int channel, /* the channel on which to run the DMA */ ++ s8 *srcAddr, /* the address to move data from, or buffer-descriptor address */ ++ s16 srcIncr, /* the amount to increment the source address per transfer */ ++ s8 *destAddr, /* the address to move data to */ ++ s16 destIncr, /* the amount to increment the destination address per transfer */ ++ u32 dmaSize, /* the number of bytes to transfer independent of the transfer size */ ++ u32 xferSize, /* the number bytes in of each data movement (1, 2, or 4) */ ++ u32 initiator, /* what device initiates the DMA */ ++ int priority, /* priority of the DMA */ ++ u32 flags, /* flags describing the DMA */ ++ u32 funcDesc /* a description of byte swapping, bit swapping, and CRC actions */ ++); ++ ++/* ++ * MCD_initDma() initializes the DMA API by setting up a pointer to the DMA ++ * registers, relocating and creating the appropriate task structures, and ++ * setting up some global settings ++ */ ++int MCD_initDma (dmaRegs *sDmaBarAddr, void *taskTableDest, u32 flags); ++ ++/* ++ * MCD_dmaStatus() returns the status of the DMA on the requested channel. ++ */ ++int MCD_dmaStatus (int channel); ++ ++/* ++ * MCD_XferProgrQuery() returns progress of DMA on requested channel ++ */ ++int MCD_XferProgrQuery (int channel, MCD_XferProg *progRep); ++ ++/* ++ * MCD_killDma() halts the DMA on the requested channel, without any ++ * intention of resuming the DMA. ++ */ ++int MCD_killDma (int channel); ++ ++/* ++ * MCD_continDma() continues a DMA which as stopped due to encountering an ++ * unready buffer descriptor. ++ */ ++int MCD_continDma (int channel); ++ ++/* ++ * MCD_pauseDma() pauses the DMA on the given channel ( if any DMA is ++ * running on that channel). ++ */ ++int MCD_pauseDma (int channel); ++ ++/* ++ * MCD_resumeDma() resumes the DMA on a given channel (if any DMA is ++ * running on that channel). ++ */ ++int MCD_resumeDma (int channel); ++ ++/* ++ * MCD_csumQuery provides the checksum/CRC after performing a non-chained DMA ++ */ ++int MCD_csumQuery (int channel, u32 *csum); ++ ++/* ++ * MCD_getCodeSize provides the packed size required by the microcoded task ++ * and structures. ++ */ ++int MCD_getCodeSize(void); ++ ++/* ++ * MCD_getVersion provides a pointer to a version string and returns a ++ * version number. ++ */ ++int MCD_getVersion(char **longVersion); ++ ++/* macro for setting a location in the variable table */ ++#define MCD_SET_VAR(taskTab,idx,value) ((u32 *)(taskTab)->varTab)[idx] = value ++ /* Note that MCD_SET_VAR() is invoked many times in firing up a DMA function, ++ so I'm avoiding surrounding it with "do {} while(0)" */ ++ ++#endif /* DEFINESONLY */ ++ ++#endif /* _MCD_API_H */ +--- /dev/null ++++ b/include/asm-m68k/mcf5445x_ccm.h +@@ -0,0 +1,163 @@ ++/* ++ * Matt Waddel Matt.Waddel@freescale.com ++ * ++ * Copyright Freescale Semiconductor, Inc. 2007 ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ */ ++ ++#ifndef __MCF5445X_CCM_H__ ++#define __MCF5445X_CCM_H__ ++ ++/********************************************************************* ++* ++* Chip Configuration Module (CCM) ++* ++*********************************************************************/ ++ ++/* Register read/write macros */ ++#define MCF_CCM_CCR MCF_REG16(0xFC0A0004) /* Chip Configuration Register (Read-only) (256 or 360 TEPBGA) */ ++#define MCF_CCM_RCON MCF_REG16(0xFC0A0008) /* Reset Configuration (Read-only) (256 or 360 TEPBGA) */ ++#define MCF_CCM_CIR MCF_REG16(0xFC0A000A) /* Chip Identification Register (Read-only) */ ++#define MCF_CCM_MISCCR MCF_REG16(0xFC0A0010) /* Miscellaneous Control Register */ ++#define MCF_CCM_CDR MCF_REG16(0xFC0A0012) /* Clock Divider Register */ ++#define MCF_CCM_UOCSR MCF_REG16(0xFC0A0014) /* USB On-the-Go Controller Status Register */ ++#define MCF_CCM_SBFSR MCF_REG16(0xFC0A0018) /* Serial Boot Facility Status Register (Read Only) */ ++#define MCF_CCM_SBFCR MCF_REG16(0xFC0A0020) /* Serial Boot Facility Control Register */ ++ ++/* Bit definitions and macros for CCR_360 */ ++#define MCF_CCM_CCR_360_PLLMULT2(x) (((x) & 0x0003)) /* 2-Bit PLL clock mode */ ++#define MCF_CCM_CCR_360_PCISLEW (0x0004) /* PCI pad slew rate mode */ ++#define MCF_CCM_CCR_360_PCIMODE (0x0008) /* PCI host/agent mode */ ++#define MCF_CCM_CCR_360_PLLMODE (0x0010) /* PLL Mode */ ++#define MCF_CCM_CCR_360_FBCONFIG(x) (((x) & 0x0007) << 5) /* Flexbus/PCI port size configuration */ ++#define MCF_CCM_CCR_360_PLLMULT3(x) (((x) & 0x0007)) /* 3-Bit PLL Clock Mode */ ++#define MCF_CCM_CCR_360_OSCMODE (0x0008) /* Oscillator Clock Mode */ ++#define MCF_CCM_CCR_360_FBCONFIG_MASK (0x00E0) ++#define MCF_CCM_CCR_360_PLLMULT2_MASK (0x0003) ++#define MCF_CCM_CCR_360_PLLMULT3_MASK (0x0007) ++#define MCF_CCM_CCR_360_FBCONFIG_NM_NP_32 (0x0000) ++#define MCF_CCM_CCR_360_FBCONFIG_NM_NP_8 (0x0020) ++#define MCF_CCM_CCR_360_FBCONFIG_NM_NP_16 (0x0040) ++#define MCF_CCM_CCR_360_FBCONFIG_M_P_16 (0x0060) ++#define MCF_CCM_CCR_360_FBCONFIG_M_NP_32 (0x0080) ++#define MCF_CCM_CCR_360_FBCONFIG_M_NP_8 (0x00A0) ++#define MCF_CCM_CCR_360_FBCONFIG_M_NP_16 (0x00C0) ++#define MCF_CCM_CCR_360_FBCONFIG_M_P_8 (0x00E0) ++#define MCF_CCM_CCR_360_PLLMULT2_12X (0x0000) ++#define MCF_CCM_CCR_360_PLLMULT2_6X (0x0001) ++#define MCF_CCM_CCR_360_PLLMULT2_16X (0x0002) ++#define MCF_CCM_CCR_360_PLLMULT2_8X (0x0003) ++#define MCF_CCM_CCR_360_PLLMULT3_20X (0x0000) ++#define MCF_CCM_CCR_360_PLLMULT3_10X (0x0001) ++#define MCF_CCM_CCR_360_PLLMULT3_24X (0x0002) ++#define MCF_CCM_CCR_360_PLLMULT3_18X (0x0003) ++#define MCF_CCM_CCR_360_PLLMULT3_12X (0x0004) ++#define MCF_CCM_CCR_360_PLLMULT3_6X (0x0005) ++#define MCF_CCM_CCR_360_PLLMULT3_16X (0x0006) ++#define MCF_CCM_CCR_360_PLLMULT3_8X (0x0007) ++ ++/* Bit definitions and macros for CCR_256 */ ++#define MCF_CCM_CCR_256_PLLMULT3(x) (((x) & 0x0007)) /* 3-Bit PLL clock mode */ ++#define MCF_CCM_CCR_256_OSCMODE (0x0008) /* Oscillator clock mode */ ++#define MCF_CCM_CCR_256_PLLMODE (0x0010) /* PLL Mode */ ++#define MCF_CCM_CCR_256_FBCONFIG(x) (((x) & 0x0007) << 5) /* Flexbus/PCI port size configuration */ ++#define MCF_CCM_CCR_256_FBCONFIG_MASK (0x00E0) ++#define MCF_CCM_CCR_256_FBCONFIG_NM_32 (0x0000) ++#define MCF_CCM_CCR_256_FBCONFIG_NM_8 (0x0020) ++#define MCF_CCM_CCR_256_FBCONFIG_NM_16 (0x0040) ++#define MCF_CCM_CCR_256_FBCONFIG_M_32 (0x0080) ++#define MCF_CCM_CCR_256_FBCONFIG_M_8 (0x00A0) ++#define MCF_CCM_CCR_256_FBCONFIG_M_16 (0x00C0) ++#define MCF_CCM_CCR_256_PLLMULT3_MASK (0x0007) ++#define MCF_CCM_CCR_256_PLLMULT3_20X (0x0000) ++#define MCF_CCM_CCR_256_PLLMULT3_10X (0x0001) ++#define MCF_CCM_CCR_256_PLLMULT3_24X (0x0002) ++#define MCF_CCM_CCR_256_PLLMULT3_18X (0x0003) ++#define MCF_CCM_CCR_256_PLLMULT3_12X (0x0004) ++#define MCF_CCM_CCR_256_PLLMULT3_6X (0x0005) ++#define MCF_CCM_CCR_256_PLLMULT3_16X (0x0006) ++#define MCF_CCM_CCR_256_PLLMULT3_8X (0x0007) ++ ++/* Bit definitions and macros for RCON_360 */ ++#define MCF_CCM_RCON_360_PLLMULT(x) (((x)&0x0003)) /* PLL clock mode */ ++#define MCF_CCM_RCON_360_PCISLEW (0x0004) /* PCI pad slew rate mode */ ++#define MCF_CCM_RCON_360_PCIMODE (0x0008) /* PCI host/agent mode */ ++#define MCF_CCM_RCON_360_PLLMODE (0x0010) /* PLL Mode */ ++#define MCF_CCM_RCON_360_FBCONFIG(x) (((x) & 0x0007) << 5) /* Flexbus/PCI port size configuration */ ++ ++/* Bit definitions and macros for RCON_256 */ ++#define MCF_CCM_RCON_256_PLLMULT(x) (((x) & 0x0007)) /* PLL clock mode */ ++#define MCF_CCM_RCON_256_OSCMODE (0x0008) /* Oscillator clock mode */ ++#define MCF_CCM_RCON_256_PLLMODE (0x0010) /* PLL Mode */ ++#define MCF_CCM_RCON_256_FBCONFIG(x) (((x) & 0x0007) << 5) /* Flexbus/PCI port size configuration */ ++ ++/* Bit definitions and macros for CIR */ ++#define MCF_CCM_CIR_PRN(x) (((x) & 0x003F)) /* Part revision number */ ++#define MCF_CCM_CIR_PIN(x) (((x) & 0x03FF) << 6) /* Part identification number */ ++#define MCF_CCM_CIR_PIN_MASK (0xFFC0) ++#define MCF_CCM_CIR_PRN_MASK (0x003F) ++#define MCF_CCM_CIR_PIN_MCF54450 (0x4F << 6) ++#define MCF_CCM_CIR_PIN_MCF54451 (0x4D << 6) ++#define MCF_CCM_CIR_PIN_MCF54452 (0x4B << 6) ++#define MCF_CCM_CIR_PIN_MCF54453 (0x49 << 6) ++#define MCF_CCM_CIR_PIN_MCF54454 (0x4A << 6) ++#define MCF_CCM_CIR_PIN_MCF54455 (0x48 << 6) ++ ++/* Bit definitions and macros for MISCCR */ ++#define MCF_CCM_MISCCR_USBSRC (0x0001) /* USB clock source */ ++#define MCF_CCM_MISCCR_USBOC (0x0002) /* USB VBUS over-current sense polarity */ ++#define MCF_CCM_MISCCR_USBPUE (0x0004) /* USB transceiver pull-up enable */ ++#define MCF_CCM_MISCCR_SSISRC (0x0010) /* SSI clock source */ ++#define MCF_CCM_MISCCR_TIMDMA (0x0020) /* Timer DMA mux selection */ ++#define MCF_CCM_MISCCR_SSIPUS (0x0040) /* SSI RXD/TXD pull select */ ++#define MCF_CCM_MISCCR_SSIPUE (0x0080) /* SSI RXD/TXD pull enable */ ++#define MCF_CCM_MISCCR_BMT(x) (((x) & 0x0007) << 8) /* Bus monitor timing field */ ++#define MCF_CCM_MISCCR_BME (0x0800) /* Bus monitor external enable bit */ ++#define MCF_CCM_MISCCR_LIMP (0x1000) /* Limp mode enable */ ++#define MCF_CCM_MISCCR_BMT_65536 (0 << 8) ++#define MCF_CCM_MISCCR_BMT_32768 (1 << 8) ++#define MCF_CCM_MISCCR_BMT_16384 (2 << 8) ++#define MCF_CCM_MISCCR_BMT_8192 (3 << 8) ++#define MCF_CCM_MISCCR_BMT_4096 (4 << 8) ++#define MCF_CCM_MISCCR_BMT_2048 (5 << 8) ++#define MCF_CCM_MISCCR_BMT_1024 (6 << 8) ++#define MCF_CCM_MISCCR_BMT_512 (7 << 8) ++#define MCF_CCM_MISCCR_SSIPUE_UP (1 << 7) ++#define MCF_CCM_MISCCR_SSIPUE_DOWN (0 << 7) ++#define MCF_CCM_MISCCR_SSIPUS_UP (1 << 6) ++#define MCF_CCM_MISCCR_SSIPUS_DOWN (0 << 6) ++#define MCF_CCM_MISCCR_TIMDMA_TIM (1 << 5) ++#define MCF_CCM_MISCCR_TIMDMA_SSI (0 << 5) ++#define MCF_CCM_MISCCR_SSISRC_CLKIN (0 << 4) ++#define MCF_CCM_MISCCR_SSISRC_PLL (1 << 4) ++#define MCF_CCM_MISCCR_USBOC_ACTHI (0 << 1) ++#define MCF_CCM_MISCCR_USBOC_ACTLO (1 << 1) ++#define MCF_CCM_MISCCR_USBSRC_CLKIN (0) ++#define MCF_CCM_MISCCR_USBSRC_PLL (1) ++ ++/* Bit definitions and macros for CDR */ ++#define MCF_CCM_CDR_SSIDIV(x) (((x) & 0x00FF)) /* SSI oversampling clock divider */ ++#define MCF_CCM_CDR_LPDIV(x) (((x) & 0x000F) << 8) /* Low power clock divider */ ++ ++/* Bit definitions and macros for UOCSR */ ++#define MCF_CCM_UOCSR_XPDE (0x0001) /* On-chip transceiver pull-down enable */ ++#define MCF_CCM_UOCSR_UOMIE (0x0002) /* USB OTG misc interrupt enable */ ++#define MCF_CCM_UOCSR_WKUP (0x0004) /* USB OTG controller wake-up event */ ++#define MCF_CCM_UOCSR_PWRFLT (0x0008) /* VBUS power fault */ ++#define MCF_CCM_UOCSR_SEND (0x0010) /* Session end */ ++#define MCF_CCM_UOCSR_VVLD (0x0020) /* VBUS valid indicator */ ++#define MCF_CCM_UOCSR_BVLD (0x0040) /* B-peripheral valid indicator */ ++#define MCF_CCM_UOCSR_AVLD (0x0080) /* A-peripheral valid indicator */ ++#define MCF_CCM_UOCSR_DPPU (0x0100) /* D+ pull-up for FS enabled (read-only) */ ++#define MCF_CCM_UOCSR_DCR_VBUS (0x0200) /* VBUS discharge resistor enabled (read-only) */ ++#define MCF_CCM_UOCSR_CRG_VBUS (0x0400) /* VBUS charge resistor enabled (read-only) */ ++#define MCF_CCM_UOCSR_DMPD (0x1000) /* D- 15Kohm pull-down (read-only) */ ++#define MCF_CCM_UOCSR_DPPD (0x2000) /* D+ 15Kohm pull-down (read-only) */ ++ ++/********************************************************************/ ++ ++#endif /* __MCF5445X_CCM_H__ */ +--- /dev/null ++++ b/include/asm-m68k/mcf5445x_dspi.h +@@ -0,0 +1,402 @@ ++/* ++ * Yaroslav Vinogradov yaroslav.vinogradov@freescale.com ++ * ++ * Copyright Freescale Semiconductor, Inc. 2007 ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ */ ++ ++#ifndef __MCF5445X_DSPI_H__ ++#define __MCF5445X_DSPI_H__ ++ ++/********************************************************************* ++* ++* DMA Serial Peripheral Interface (DSPI) ++* ++*********************************************************************/ ++ ++/* Register read/write macros */ ++#define MCF_DSPI_DMCR MCF_REG32(0xFC05C000) /* DSPI Module Configuration Register */ ++#define MCF_DSPI_DTCR MCF_REG32(0xFC05C008) /* DSPI Transfer Count Register */ ++#define MCF_DSPI_DCTAR0 MCF_REG32(0xFC05C00C) /* DSPI Clock and Transfer Attributes Register */ ++#define MCF_DSPI_DCTAR1 MCF_REG32(0xFC05C010) /* DSPI Clock and Transfer Attributes Register */ ++#define MCF_DSPI_DCTAR2 MCF_REG32(0xFC05C014) /* DSPI Clock and Transfer Attributes Register */ ++#define MCF_DSPI_DCTAR3 MCF_REG32(0xFC05C018) /* DSPI Clock and Transfer Attributes Register */ ++#define MCF_DSPI_DCTAR4 MCF_REG32(0xFC05C01C) /* DSPI Clock and Transfer Attributes Register */ ++#define MCF_DSPI_DCTAR5 MCF_REG32(0xFC05C020) /* DSPI Clock and Transfer Attributes Register */ ++#define MCF_DSPI_DCTAR6 MCF_REG32(0xFC05C024) /* DSPI Clock and Transfer Attributes Register */ ++#define MCF_DSPI_DCTAR7 MCF_REG32(0xFC05C028) /* DSPI Clock and Transfer Attributes Register */ ++#define MCF_DSPI_DSR MCF_REG32(0xFC05C02C) /* DSPI Status Register */ ++#define MCF_DSPI_DRSER MCF_REG32(0xFC05C030) /* DSPI DMA/Interrupt Request Select and Enable Register */ ++#define MCF_DSPI_DTFR MCF_REG32(0xFC05C034) /* DSPI Transmit FIFO Register */ ++#define MCF_DSPI_DRFR MCF_REG32(0xFC05C038) /* DSPI Receive FIFO Register */ ++#define MCF_DSPI_DTFDR0 MCF_REG32(0xFC05C03C) /* DSPI Transmit FIFO Debugging Registers */ ++#define MCF_DSPI_DTFDR1 MCF_REG32(0xFC05C040) /* DSPI Transmit FIFO Debugging Registers */ ++#define MCF_DSPI_DTFDR2 MCF_REG32(0xFC05C044) /* DSPI Transmit FIFO Debugging Registers */ ++#define MCF_DSPI_DTFDR3 MCF_REG32(0xFC05C048) /* DSPI Transmit FIFO Debugging Registers */ ++#define MCF_DSPI_DRFDR0 MCF_REG32(0xFC05C07C) /* DSPI Receive FIFO Debugging Registers */ ++#define MCF_DSPI_DRFDR1 MCF_REG32(0xFC05C080) /* DSPI Receive FIFO Debugging Registers */ ++#define MCF_DSPI_DRFDR2 MCF_REG32(0xFC05C084) /* DSPI Receive FIFO Debugging Registers */ ++#define MCF_DSPI_DRFDR3 MCF_REG32(0xFC05C088) /* DSPI Receive FIFO Debugging Registers */ ++ ++/* Parameterized register read/write macros for multiple registers */ ++#define MCF_DSPI_DCTAR(x) MCF_REG32(0xFC05C00C+((x)*0x004)) /* DSPI Clock and Transfer Attributes Register */ ++#define MCF_DSPI_DTFDR(x) MCF_REG32(0xFC05C03C+((x)*0x004)) /* DSPI Transmit FIFO Debugging Registers */ ++#define MCF_DSPI_DRFDR(x) MCF_REG32(0xFC05C07C+((x)*0x004)) /* DSPI Receive FIFO Debugging Registers */ ++ ++/* Bit definitions and macros for DMCR */ ++#define MCF_DSPI_DMCR_HALT (0x00000001) /* Halt -- stops and starts DSPI transfers */ ++#define MCF_DSPI_DMCR_SMPLPT(x) (((x)&0x00000003)<<8) /* Sample point selection */ ++#define MCF_DSPI_DMCR_CLRRXF (0x00000400) /* Clear receive FIFO */ ++#define MCF_DSPI_DMCR_CLRTXF (0x00000800) /* Clear transmit FIFO */ ++#define MCF_DSPI_DMCR_DISRXF (0x00001000) /* Disable receive FIFO */ ++#define MCF_DSPI_DMCR_DISTXF (0x00002000) /* Disable transmit FIFO */ ++#define MCF_DSPI_DMCR_MDIS (0x00004000) /* Module Disable */ ++#define MCF_DSPI_DMCR_PCSIS0 (0x00010000) /* Peripheral chip-select 0 inactive state */ ++#define MCF_DSPI_DMCR_PCSIS1 (0x00020000) /* Peripheral chip-select 1 inactive state */ ++#define MCF_DSPI_DMCR_PCSIS2 (0x00040000) /* Peripheral chip-select 2 inactive state */ ++#define MCF_DSPI_DMCR_PCSIS3 (0x00080000) /* Peripheral chip-select 3 inactive state */ ++#define MCF_DSPI_DMCR_PCSIS4 (0x00100000) /* Peripheral chip-select 4 inactive state */ ++#define MCF_DSPI_DMCR_PCSIS5 (0x00200000) /* Peripheral chip-select 5 inactive state */ ++#define MCF_DSPI_DMCR_PCSIS6 (0x00400000) /* Peripheral chip-select 6 inactive state */ ++#define MCF_DSPI_DMCR_PCSIS7 (0x00800000) /* Peripheral chip-select 7 inactive state */ ++#define MCF_DSPI_DMCR_ROOE (0x01000000) /* Receive FIFO overflow overwrite enable */ ++#define MCF_DSPI_DMCR_PCSSE (0x02000000) /* Peripheral chip select strobe enable */ ++#define MCF_DSPI_DMCR_MTFE (0x04000000) /* Modified timing format enable */ ++#define MCF_DSPI_DMCR_FRZ (0x08000000) /* Freeze */ ++#define MCF_DSPI_DMCR_DCONF(x) (((x)&0x00000003)<<28) /* DSPI configuration */ ++#define MCF_DSPI_DMCR_CONT_SCKE (0x40000000) /* Continuous SCK enable */ ++#define MCF_DSPI_DMCR_MSTR (0x80000000) /* Master/Slave mode select */ ++#define MCF_DSPI_DMCR_DCONF_SPI (0x00000000) ++#define MCF_DSPI_DMCR_PCSIS7_LOW (0x00000000) ++#define MCF_DSPI_DMCR_PCSIS7_HIGH (0x00800000) ++#define MCF_DSPI_DMCR_PCSIS6_LOW (0x00000000) ++#define MCF_DSPI_DMCR_PCSIS6_HIGH (0x00400000) ++#define MCF_DSPI_DMCR_PCSIS5_LOW (0x00000000) ++#define MCF_DSPI_DMCR_PCSIS5_HIGH (0x00200000) ++#define MCF_DSPI_DMCR_PCSIS4_LOW (0x00000000) ++#define MCF_DSPI_DMCR_PCSIS4_HIGH (0x00100000) ++#define MCF_DSPI_DMCR_PCSIS3_LOW (0x00000000) ++#define MCF_DSPI_DMCR_PCSIS3_HIGH (0x00080000) ++#define MCF_DSPI_DMCR_PCSIS2_LOW (0x00000000) ++#define MCF_DSPI_DMCR_PCSIS2_HIGH (0x00040000) ++#define MCF_DSPI_DMCR_PCSIS1_LOW (0x00000000) ++#define MCF_DSPI_DMCR_PCSIS1_HIGH (0x00020000) ++#define MCF_DSPI_DMCR_PCSIS0_LOW (0x00000000) ++#define MCF_DSPI_DMCR_PCSIS0_HIGH (0x00010000) ++ ++/* Bit definitions and macros for DTCR */ ++#define MCF_DSPI_DTCR_SPI_TCNT(x) (((x)&0x0000FFFF)<<16) /* SPI transfer count */ ++ ++/* Bit definitions and macros for DCTAR group */ ++#define MCF_DSPI_DCTAR_BR(x) (((x)&0x0000000F)) /* Baud rate scaler */ ++#define MCF_DSPI_DCTAR_DT(x) (((x)&0x0000000F)<<4) /* Delay after transfer scaler */ ++#define MCF_DSPI_DCTAR_ASC(x) (((x)&0x0000000F)<<8) /* After SCK delay scaler */ ++#define MCF_DSPI_DCTAR_CSSCK(x) (((x)&0x0000000F)<<12) /* PCS to SCK delay scaler */ ++#define MCF_DSPI_DCTAR_PBR(x) (((x)&0x00000003)<<16) /* Baud rate prescaler */ ++#define MCF_DSPI_DCTAR_PDT(x) (((x)&0x00000003)<<18) /* Delay after transfer prescaler */ ++#define MCF_DSPI_DCTAR_PASC(x) (((x)&0x00000003)<<20) /* After SCK delay prescaler */ ++#define MCF_DSPI_DCTAR_PCSSCK(x) (((x)&0x00000003)<<22) /* PCS to SCK delay prescaler */ ++#define MCF_DSPI_DCTAR_LSBFE (0x01000000) /* LSB first enable */ ++#define MCF_DSPI_DCTAR_CPHA (0x02000000) /* Clock phase */ ++#define MCF_DSPI_DCTAR_CPOL (0x04000000) /* Clock polarity */ ++#define MCF_DSPI_DCTAR_FMSZ(x) (((x)&0x0000000F)<<27) /* Frame size */ ++#define MCF_DSPI_DCTAR_DBR (0x80000000) /* Double baud rate */ ++#define MCF_DSPI_DCTAR_CPOL_LOW (0x00000000) ++#define MCF_DSPI_DCTAR_CPOL_HIGH (0x04000000) ++#define MCF_DSPI_DCTAR_CPHA_LATCH_RISING (0x00000000) ++#define MCF_DSPI_DCTAR_CPHA_LATCH_FALLING (0x02000000) ++#define MCF_DSPI_DCTAR_PCSSCK_1CLK (0x00000000) ++#define MCF_DSPI_DCTAR_PCSSCK_3CLK (0x00400000) ++#define MCF_DSPI_DCTAR_PCSSCK_5CLK (0x00800000) ++#define MCF_DSPI_DCTAR_PCSSCK_7CLK (0x00C00000) ++#define MCF_DSPI_DCTAR_PASC_1CLK (0x00000000) ++#define MCF_DSPI_DCTAR_PASC_3CLK (0x00100000) ++#define MCF_DSPI_DCTAR_PASC_5CLK (0x00200000) ++#define MCF_DSPI_DCTAR_PASC_7CLK (0x00300000) ++#define MCF_DSPI_DCTAR_PDT_1CLK (0x00000000) ++#define MCF_DSPI_DCTAR_PDT_3CLK (0x00040000) ++#define MCF_DSPI_DCTAR_PDT_5CLK (0x00080000) ++#define MCF_DSPI_DCTAR_PDT_7CLK (0x000C0000) ++#define MCF_DSPI_DCTAR_PBR_2CLK (0x00000000) ++#define MCF_DSPI_DCTAR_PBR_3CLK (0x00010000) ++#define MCF_DSPI_DCTAR_PBR_5CLK (0x00020000) ++#define MCF_DSPI_DCTAR_PBR_7CLK (0x00030000) ++ ++/* Bit definitions and macros for DCTAR0 */ ++#define MCF_DSPI_DCTAR0_BR(x) (((x)&0x0000000F)) /* Baud rate scaler */ ++#define MCF_DSPI_DCTAR0_DT(x) (((x)&0x0000000F)<<4) /* Delay after transfer scaler */ ++#define MCF_DSPI_DCTAR0_ASC(x) (((x)&0x0000000F)<<8) /* After SCK delay scaler */ ++#define MCF_DSPI_DCTAR0_CSSCK(x) (((x)&0x0000000F)<<12) /* PCS to SCK delay scaler */ ++#define MCF_DSPI_DCTAR0_PBR(x) (((x)&0x00000003)<<16) /* Baud rate prescaler */ ++#define MCF_DSPI_DCTAR0_PDT(x) (((x)&0x00000003)<<18) /* Delay after transfer prescaler */ ++#define MCF_DSPI_DCTAR0_PASC(x) (((x)&0x00000003)<<20) /* After SCK delay prescaler */ ++#define MCF_DSPI_DCTAR0_PCSSCK(x) (((x)&0x00000003)<<22) /* PCS to SCK delay prescaler */ ++#define MCF_DSPI_DCTAR0_LSBFE (0x01000000) /* LSB first enable */ ++#define MCF_DSPI_DCTAR0_CPHA (0x02000000) /* Clock phase */ ++#define MCF_DSPI_DCTAR0_CPOL (0x04000000) /* Clock polarity */ ++#define MCF_DSPI_DCTAR0_FMSZ(x) (((x)&0x0000000F)<<27) /* Frame size */ ++#define MCF_DSPI_DCTAR0_DBR (0x80000000) /* Double baud rate */ ++#define MCF_DSPI_DCTAR0_CPOL_LOW (0x00000000) ++#define MCF_DSPI_DCTAR0_CPOL_HIGH (0x04000000) ++#define MCF_DSPI_DCTAR0_CPHA_LATCH_RISING (0x00000000) ++#define MCF_DSPI_DCTAR0_CPHA_LATCH_FALLING (0x02000000) ++#define MCF_DSPI_DCTAR0_PCSSCK_1CLK (0x00000000) ++#define MCF_DSPI_DCTAR0_PCSSCK_3CLK (0x00400000) ++#define MCF_DSPI_DCTAR0_PCSSCK_5CLK (0x00800000) ++#define MCF_DSPI_DCTAR0_PCSSCK_7CLK (0x00C00000) ++#define MCF_DSPI_DCTAR0_PASC_1CLK (0x00000000) ++#define MCF_DSPI_DCTAR0_PASC_3CLK (0x00100000) ++#define MCF_DSPI_DCTAR0_PASC_5CLK (0x00200000) ++#define MCF_DSPI_DCTAR0_PASC_7CLK (0x00300000) ++#define MCF_DSPI_DCTAR0_PDT_1CLK (0x00000000) ++#define MCF_DSPI_DCTAR0_PDT_3CLK (0x00040000) ++#define MCF_DSPI_DCTAR0_PDT_5CLK (0x00080000) ++#define MCF_DSPI_DCTAR0_PDT_7CLK (0x000C0000) ++#define MCF_DSPI_DCTAR0_PBR_2CLK (0x00000000) ++#define MCF_DSPI_DCTAR0_PBR_3CLK (0x00010000) ++#define MCF_DSPI_DCTAR0_PBR_5CLK (0x00020000) ++#define MCF_DSPI_DCTAR0_PBR_7CLK (0x00030000) ++ ++/* Bit definitions and macros for DCTAR1 */ ++#define MCF_DSPI_DCTAR1_BR(x) (((x)&0x0000000F)) /* Baud rate scaler */ ++#define MCF_DSPI_DCTAR1_DT(x) (((x)&0x0000000F)<<4) /* Delay after transfer scaler */ ++#define MCF_DSPI_DCTAR1_ASC(x) (((x)&0x0000000F)<<8) /* After SCK delay scaler */ ++#define MCF_DSPI_DCTAR1_CSSCK(x) (((x)&0x0000000F)<<12) /* PCS to SCK delay scaler */ ++#define MCF_DSPI_DCTAR1_PBR(x) (((x)&0x00000003)<<16) /* Baud rate prescaler */ ++#define MCF_DSPI_DCTAR1_PDT(x) (((x)&0x00000003)<<18) /* Delay after transfer prescaler */ ++#define MCF_DSPI_DCTAR1_PASC(x) (((x)&0x00000003)<<20) /* After SCK delay prescaler */ ++#define MCF_DSPI_DCTAR1_PCSSCK(x) (((x)&0x00000003)<<22) /* PCS to SCK delay prescaler */ ++#define MCF_DSPI_DCTAR1_LSBFE (0x01000000) /* LSB first enable */ ++#define MCF_DSPI_DCTAR1_CPHA (0x02000000) /* Clock phase */ ++#define MCF_DSPI_DCTAR1_CPOL (0x04000000) /* Clock polarity */ ++#define MCF_DSPI_DCTAR1_FMSZ(x) (((x)&0x0000000F)<<27) /* Frame size */ ++#define MCF_DSPI_DCTAR1_DBR (0x80000000) /* Double baud rate */ ++ ++/* Bit definitions and macros for DCTAR2 */ ++#define MCF_DSPI_DCTAR2_BR(x) (((x)&0x0000000F)) /* Baud rate scaler */ ++#define MCF_DSPI_DCTAR2_DT(x) (((x)&0x0000000F)<<4) /* Delay after transfer scaler */ ++#define MCF_DSPI_DCTAR2_ASC(x) (((x)&0x0000000F)<<8) /* After SCK delay scaler */ ++#define MCF_DSPI_DCTAR2_CSSCK(x) (((x)&0x0000000F)<<12) /* PCS to SCK delay scaler */ ++#define MCF_DSPI_DCTAR2_PBR(x) (((x)&0x00000003)<<16) /* Baud rate prescaler */ ++#define MCF_DSPI_DCTAR2_PDT(x) (((x)&0x00000003)<<18) /* Delay after transfer prescaler */ ++#define MCF_DSPI_DCTAR2_PASC(x) (((x)&0x00000003)<<20) /* After SCK delay prescaler */ ++#define MCF_DSPI_DCTAR2_PCSSCK(x) (((x)&0x00000003)<<22) /* PCS to SCK delay prescaler */ ++#define MCF_DSPI_DCTAR2_LSBFE (0x01000000) /* LSB first enable */ ++#define MCF_DSPI_DCTAR2_CPHA (0x02000000) /* Clock phase */ ++#define MCF_DSPI_DCTAR2_CPOL (0x04000000) /* Clock polarity */ ++#define MCF_DSPI_DCTAR2_FMSZ(x) (((x)&0x0000000F)<<27) /* Frame size */ ++#define MCF_DSPI_DCTAR2_DBR (0x80000000) /* Double baud rate */ ++ ++/* Bit definitions and macros for DCTAR3 */ ++#define MCF_DSPI_DCTAR3_BR(x) (((x)&0x0000000F)) /* Baud rate scaler */ ++#define MCF_DSPI_DCTAR3_DT(x) (((x)&0x0000000F)<<4) /* Delay after transfer scaler */ ++#define MCF_DSPI_DCTAR3_ASC(x) (((x)&0x0000000F)<<8) /* After SCK delay scaler */ ++#define MCF_DSPI_DCTAR3_CSSCK(x) (((x)&0x0000000F)<<12) /* PCS to SCK delay scaler */ ++#define MCF_DSPI_DCTAR3_PBR(x) (((x)&0x00000003)<<16) /* Baud rate prescaler */ ++#define MCF_DSPI_DCTAR3_PDT(x) (((x)&0x00000003)<<18) /* Delay after transfer prescaler */ ++#define MCF_DSPI_DCTAR3_PASC(x) (((x)&0x00000003)<<20) /* After SCK delay prescaler */ ++#define MCF_DSPI_DCTAR3_PCSSCK(x) (((x)&0x00000003)<<22) /* PCS to SCK delay prescaler */ ++#define MCF_DSPI_DCTAR3_LSBFE (0x01000000) /* LSB first enable */ ++#define MCF_DSPI_DCTAR3_CPHA (0x02000000) /* Clock phase */ ++#define MCF_DSPI_DCTAR3_CPOL (0x04000000) /* Clock polarity */ ++#define MCF_DSPI_DCTAR3_FMSZ(x) (((x)&0x0000000F)<<27) /* Frame size */ ++#define MCF_DSPI_DCTAR3_DBR (0x80000000) /* Double baud rate */ ++ ++/* Bit definitions and macros for DCTAR4 */ ++#define MCF_DSPI_DCTAR4_BR(x) (((x)&0x0000000F)) /* Baud rate scaler */ ++#define MCF_DSPI_DCTAR4_DT(x) (((x)&0x0000000F)<<4) /* Delay after transfer scaler */ ++#define MCF_DSPI_DCTAR4_ASC(x) (((x)&0x0000000F)<<8) /* After SCK delay scaler */ ++#define MCF_DSPI_DCTAR4_CSSCK(x) (((x)&0x0000000F)<<12) /* PCS to SCK delay scaler */ ++#define MCF_DSPI_DCTAR4_PBR(x) (((x)&0x00000003)<<16) /* Baud rate prescaler */ ++#define MCF_DSPI_DCTAR4_PDT(x) (((x)&0x00000003)<<18) /* Delay after transfer prescaler */ ++#define MCF_DSPI_DCTAR4_PASC(x) (((x)&0x00000003)<<20) /* After SCK delay prescaler */ ++#define MCF_DSPI_DCTAR4_PCSSCK(x) (((x)&0x00000003)<<22) /* PCS to SCK delay prescaler */ ++#define MCF_DSPI_DCTAR4_LSBFE (0x01000000) /* LSB first enable */ ++#define MCF_DSPI_DCTAR4_CPHA (0x02000000) /* Clock phase */ ++#define MCF_DSPI_DCTAR4_CPOL (0x04000000) /* Clock polarity */ ++#define MCF_DSPI_DCTAR4_FMSZ(x) (((x)&0x0000000F)<<27) /* Frame size */ ++#define MCF_DSPI_DCTAR4_DBR (0x80000000) /* Double baud rate */ ++ ++/* Bit definitions and macros for DCTAR5 */ ++#define MCF_DSPI_DCTAR5_BR(x) (((x)&0x0000000F)) /* Baud rate scaler */ ++#define MCF_DSPI_DCTAR5_DT(x) (((x)&0x0000000F)<<4) /* Delay after transfer scaler */ ++#define MCF_DSPI_DCTAR5_ASC(x) (((x)&0x0000000F)<<8) /* After SCK delay scaler */ ++#define MCF_DSPI_DCTAR5_CSSCK(x) (((x)&0x0000000F)<<12) /* PCS to SCK delay scaler */ ++#define MCF_DSPI_DCTAR5_PBR(x) (((x)&0x00000003)<<16) /* Baud rate prescaler */ ++#define MCF_DSPI_DCTAR5_PDT(x) (((x)&0x00000003)<<18) /* Delay after transfer prescaler */ ++#define MCF_DSPI_DCTAR5_PASC(x) (((x)&0x00000003)<<20) /* After SCK delay prescaler */ ++#define MCF_DSPI_DCTAR5_PCSSCK(x) (((x)&0x00000003)<<22) /* PCS to SCK delay prescaler */ ++#define MCF_DSPI_DCTAR5_LSBFE (0x01000000) /* LSB first enable */ ++#define MCF_DSPI_DCTAR5_CPHA (0x02000000) /* Clock phase */ ++#define MCF_DSPI_DCTAR5_CPOL (0x04000000) /* Clock polarity */ ++#define MCF_DSPI_DCTAR5_FMSZ(x) (((x)&0x0000000F)<<27) /* Frame size */ ++#define MCF_DSPI_DCTAR5_DBR (0x80000000) /* Double baud rate */ ++ ++/* Bit definitions and macros for DCTAR6 */ ++#define MCF_DSPI_DCTAR6_BR(x) (((x)&0x0000000F)) /* Baud rate scaler */ ++#define MCF_DSPI_DCTAR6_DT(x) (((x)&0x0000000F)<<4) /* Delay after transfer scaler */ ++#define MCF_DSPI_DCTAR6_ASC(x) (((x)&0x0000000F)<<8) /* After SCK delay scaler */ ++#define MCF_DSPI_DCTAR6_CSSCK(x) (((x)&0x0000000F)<<12) /* PCS to SCK delay scaler */ ++#define MCF_DSPI_DCTAR6_PBR(x) (((x)&0x00000003)<<16) /* Baud rate prescaler */ ++#define MCF_DSPI_DCTAR6_PDT(x) (((x)&0x00000003)<<18) /* Delay after transfer prescaler */ ++#define MCF_DSPI_DCTAR6_PASC(x) (((x)&0x00000003)<<20) /* After SCK delay prescaler */ ++#define MCF_DSPI_DCTAR6_PCSSCK(x) (((x)&0x00000003)<<22) /* PCS to SCK delay prescaler */ ++#define MCF_DSPI_DCTAR6_LSBFE (0x01000000) /* LSB first enable */ ++#define MCF_DSPI_DCTAR6_CPHA (0x02000000) /* Clock phase */ ++#define MCF_DSPI_DCTAR6_CPOL (0x04000000) /* Clock polarity */ ++#define MCF_DSPI_DCTAR6_FMSZ(x) (((x)&0x0000000F)<<27) /* Frame size */ ++#define MCF_DSPI_DCTAR6_DBR (0x80000000) /* Double baud rate */ ++ ++/* Bit definitions and macros for DCTAR7 */ ++#define MCF_DSPI_DCTAR7_BR(x) (((x)&0x0000000F)) /* Baud rate scaler */ ++#define MCF_DSPI_DCTAR7_DT(x) (((x)&0x0000000F)<<4) /* Delay after transfer scaler */ ++#define MCF_DSPI_DCTAR7_ASC(x) (((x)&0x0000000F)<<8) /* After SCK delay scaler */ ++#define MCF_DSPI_DCTAR7_CSSCK(x) (((x)&0x0000000F)<<12) /* PCS to SCK delay scaler */ ++#define MCF_DSPI_DCTAR7_PBR(x) (((x)&0x00000003)<<16) /* Baud rate prescaler */ ++#define MCF_DSPI_DCTAR7_PDT(x) (((x)&0x00000003)<<18) /* Delay after transfer prescaler */ ++#define MCF_DSPI_DCTAR7_PASC(x) (((x)&0x00000003)<<20) /* After SCK delay prescaler */ ++#define MCF_DSPI_DCTAR7_PCSSCK(x) (((x)&0x00000003)<<22) /* PCS to SCK delay prescaler */ ++#define MCF_DSPI_DCTAR7_LSBFE (0x01000000) /* LSB first enable */ ++#define MCF_DSPI_DCTAR7_CPHA (0x02000000) /* Clock phase */ ++#define MCF_DSPI_DCTAR7_CPOL (0x04000000) /* Clock polarity */ ++#define MCF_DSPI_DCTAR7_FMSZ(x) (((x)&0x0000000F)<<27) /* Frame size */ ++#define MCF_DSPI_DCTAR7_DBR (0x80000000) /* Double baud rate */ ++ ++/* Bit definitions and macros for DSR */ ++#define MCF_DSPI_DSR_RXPTR(x) (((x)&0x0000000F)) /* Receive next pointer */ ++#define MCF_DSPI_DSR_RXCTR(x) (((x)&0x0000000F)<<4) /* Receive FIFO counter */ ++#define MCF_DSPI_DSR_TXPTR(x) (((x)&0x0000000F)<<8) /* Transmit next pointer */ ++#define MCF_DSPI_DSR_TXCTR(x) (((x)&0x0000000F)<<12) /* Transmit FIFO counter */ ++#define MCF_DSPI_DSR_RFDF (0x00020000) /* Receive FIFO drain flag */ ++#define MCF_DSPI_DSR_RFOF (0x00080000) /* Receive FIFO overflow flag */ ++#define MCF_DSPI_DSR_TFFF (0x02000000) /* Transmit FIFO fill flag */ ++#define MCF_DSPI_DSR_TFUF (0x08000000) /* Transmit FIFO underflow flag */ ++#define MCF_DSPI_DSR_EOQF (0x10000000) /* End of queue flag */ ++#define MCF_DSPI_DSR_TXRXS (0x40000000) /* Tx and Rx status (enabled | disabled) */ ++#define MCF_DSPI_DSR_TCF (0x80000000) /* Transfer complete flag */ ++ ++/* Bit definitions and macros for DRSER */ ++#define MCF_DSPI_DRSER_RFDFS (0x00010000) /* Receive FIFO drain DMA or interrupt select */ ++#define MCF_DSPI_DRSER_RFDFE (0x00020000) /* Receive FIFO drain request enable */ ++#define MCF_DSPI_DRSER_RFOFE (0x00080000) /* Receive FIFO overflow request enable */ ++#define MCF_DSPI_DRSER_TFFFS (0x01000000) /* Transmit FIFO fill DMA or interrupt select */ ++#define MCF_DSPI_DRSER_TFFFE (0x02000000) /* Transmit FIFO fill request enable */ ++#define MCF_DSPI_DRSER_TFUFE (0x08000000) /* Transmit FIFO underflow request enable */ ++#define MCF_DSPI_DRSER_EOQFE (0x10000000) /* DSPI finished request enable */ ++#define MCF_DSPI_DRSER_TCFE (0x80000000) /* Transmission complete request enable */ ++ ++/* Bit definitions and macros for DTFR */ ++#define MCF_DSPI_DTFR_TXDATA(x) (((x)&0x0000FFFF)) /* Transmit data */ ++#define MCF_DSPI_DTFR_PCS0 (0x00010000) /* Peripheral chip select 0 */ ++#define MCF_DSPI_DTFR_PCS1 (0x00020000) /* Peripheral chip select 1 */ ++#define MCF_DSPI_DTFR_PCS2 (0x00040000) /* Peripheral chip select 2 */ ++#define MCF_DSPI_DTFR_PCS3 (0x00080000) /* Peripheral chip select 3 */ ++#define MCF_DSPI_DTFR_PCS4 (0x00100000) /* Peripheral chip select 4 */ ++#define MCF_DSPI_DTFR_PCS5 (0x00200000) /* Peripheral chip select 5 */ ++#define MCF_DSPI_DTFR_PCS6 (0x00400000) /* Peripheral chip select 6 */ ++#define MCF_DSPI_DTFR_PCS7 (0x00800000) /* Peripheral chip select 7 */ ++#define MCF_DSPI_DTFR_CTCNT (0x04000000) /* Clear SPI transfer counter */ ++#define MCF_DSPI_DTFR_EOQ (0x08000000) /* End of queue */ ++#define MCF_DSPI_DTFR_CTAS(x) (((x)&0x00000007)<<28) /* Clock and transfer attributes select */ ++#define MCF_DSPI_DTFR_CONT (0x80000000) /* Continuous peripheral chip-select enable */ ++ ++/* Bit definitions and macros for DRFR */ ++#define MCF_DSPI_DRFR_RXDATA(x) (((x)&0x0000FFFF)) /* Receive data */ ++ ++/* Bit definitions and macros for DTFDR group */ ++#define MCF_DSPI_DTFDR_TXDATA(x) (((x)&0x0000FFFF)) /* Transmit data */ ++#define MCF_DSPI_DTFDR_PCS0 (0x00010000) /* Peripheral chip select 0 */ ++#define MCF_DSPI_DTFDR_PCS1 (0x00020000) /* Peripheral chip select 1 */ ++#define MCF_DSPI_DTFDR_PCS2 (0x00040000) /* Peripheral chip select 2 */ ++#define MCF_DSPI_DTFDR_PCS3 (0x00080000) /* Peripheral chip select 3 */ ++#define MCF_DSPI_DTFDR_PCS4 (0x00100000) /* Peripheral chip select 4 */ ++#define MCF_DSPI_DTFDR_PCS5 (0x00200000) /* Peripheral chip select 5 */ ++#define MCF_DSPI_DTFDR_PCS6 (0x00400000) /* Peripheral chip select 6 */ ++#define MCF_DSPI_DTFDR_PCS7 (0x00800000) /* Peripheral chip select 7 */ ++#define MCF_DSPI_DTFDR_CTCNT (0x04000000) /* Clear SPI transfer counter */ ++#define MCF_DSPI_DTFDR_EOQ (0x08000000) /* End of queue */ ++#define MCF_DSPI_DTFDR_CTAS(x) (((x)&0x00000007)<<28) /* Clock and transfer attributes select */ ++#define MCF_DSPI_DTFDR_CONT (0x80000000) /* Continuous peripheral chip-select enable */ ++ ++/* Bit definitions and macros for DTFDR0 */ ++#define MCF_DSPI_DTFDR0_TXDATA(x) (((x)&0x0000FFFF)) /* Transmit data */ ++#define MCF_DSPI_DTFDR0_PCS0 (0x00010000) /* Peripheral chip select 0 */ ++#define MCF_DSPI_DTFDR0_PCS1 (0x00020000) /* Peripheral chip select 1 */ ++#define MCF_DSPI_DTFDR0_PCS2 (0x00040000) /* Peripheral chip select 2 */ ++#define MCF_DSPI_DTFDR0_PCS3 (0x00080000) /* Peripheral chip select 3 */ ++#define MCF_DSPI_DTFDR0_PCS4 (0x00100000) /* Peripheral chip select 4 */ ++#define MCF_DSPI_DTFDR0_PCS5 (0x00200000) /* Peripheral chip select 5 */ ++#define MCF_DSPI_DTFDR0_PCS6 (0x00400000) /* Peripheral chip select 6 */ ++#define MCF_DSPI_DTFDR0_PCS7 (0x00800000) /* Peripheral chip select 7 */ ++#define MCF_DSPI_DTFDR0_CTCNT (0x04000000) /* Clear SPI transfer counter */ ++#define MCF_DSPI_DTFDR0_EOQ (0x08000000) /* End of queue */ ++#define MCF_DSPI_DTFDR0_CTAS(x) (((x)&0x00000007)<<28) /* Clock and transfer attributes select */ ++#define MCF_DSPI_DTFDR0_CONT (0x80000000) /* Continuous peripheral chip-select enable */ ++ ++/* Bit definitions and macros for DTFDR1 */ ++#define MCF_DSPI_DTFDR1_TXDATA(x) (((x)&0x0000FFFF)) /* Transmit data */ ++#define MCF_DSPI_DTFDR1_PCS0 (0x00010000) /* Peripheral chip select 0 */ ++#define MCF_DSPI_DTFDR1_PCS1 (0x00020000) /* Peripheral chip select 1 */ ++#define MCF_DSPI_DTFDR1_PCS2 (0x00040000) /* Peripheral chip select 2 */ ++#define MCF_DSPI_DTFDR1_PCS3 (0x00080000) /* Peripheral chip select 3 */ ++#define MCF_DSPI_DTFDR1_PCS4 (0x00100000) /* Peripheral chip select 4 */ ++#define MCF_DSPI_DTFDR1_PCS5 (0x00200000) /* Peripheral chip select 5 */ ++#define MCF_DSPI_DTFDR1_PCS6 (0x00400000) /* Peripheral chip select 6 */ ++#define MCF_DSPI_DTFDR1_PCS7 (0x00800000) /* Peripheral chip select 7 */ ++#define MCF_DSPI_DTFDR1_CTCNT (0x04000000) /* Clear SPI transfer counter */ ++#define MCF_DSPI_DTFDR1_EOQ (0x08000000) /* End of queue */ ++#define MCF_DSPI_DTFDR1_CTAS(x) (((x)&0x00000007)<<28) /* Clock and transfer attributes select */ ++#define MCF_DSPI_DTFDR1_CONT (0x80000000) /* Continuous peripheral chip-select enable */ ++ ++/* Bit definitions and macros for DTFDR2 */ ++#define MCF_DSPI_DTFDR2_TXDATA(x) (((x)&0x0000FFFF)) /* Transmit data */ ++#define MCF_DSPI_DTFDR2_PCS0 (0x00010000) /* Peripheral chip select 0 */ ++#define MCF_DSPI_DTFDR2_PCS1 (0x00020000) /* Peripheral chip select 1 */ ++#define MCF_DSPI_DTFDR2_PCS2 (0x00040000) /* Peripheral chip select 2 */ ++#define MCF_DSPI_DTFDR2_PCS3 (0x00080000) /* Peripheral chip select 3 */ ++#define MCF_DSPI_DTFDR2_PCS4 (0x00100000) /* Peripheral chip select 4 */ ++#define MCF_DSPI_DTFDR2_PCS5 (0x00200000) /* Peripheral chip select 5 */ ++#define MCF_DSPI_DTFDR2_PCS6 (0x00400000) /* Peripheral chip select 6 */ ++#define MCF_DSPI_DTFDR2_PCS7 (0x00800000) /* Peripheral chip select 7 */ ++#define MCF_DSPI_DTFDR2_CTCNT (0x04000000) /* Clear SPI transfer counter */ ++#define MCF_DSPI_DTFDR2_EOQ (0x08000000) /* End of queue */ ++#define MCF_DSPI_DTFDR2_CTAS(x) (((x)&0x00000007)<<28) /* Clock and transfer attributes select */ ++#define MCF_DSPI_DTFDR2_CONT (0x80000000) /* Continuous peripheral chip-select enable */ ++ ++/* Bit definitions and macros for DTFDR3 */ ++#define MCF_DSPI_DTFDR3_TXDATA(x) (((x)&0x0000FFFF)) /* Transmit data */ ++#define MCF_DSPI_DTFDR3_PCS0 (0x00010000) /* Peripheral chip select 0 */ ++#define MCF_DSPI_DTFDR3_PCS1 (0x00020000) /* Peripheral chip select 1 */ ++#define MCF_DSPI_DTFDR3_PCS2 (0x00040000) /* Peripheral chip select 2 */ ++#define MCF_DSPI_DTFDR3_PCS3 (0x00080000) /* Peripheral chip select 3 */ ++#define MCF_DSPI_DTFDR3_PCS4 (0x00100000) /* Peripheral chip select 4 */ ++#define MCF_DSPI_DTFDR3_PCS5 (0x00200000) /* Peripheral chip select 5 */ ++#define MCF_DSPI_DTFDR3_PCS6 (0x00400000) /* Peripheral chip select 6 */ ++#define MCF_DSPI_DTFDR3_PCS7 (0x00800000) /* Peripheral chip select 7 */ ++#define MCF_DSPI_DTFDR3_CTCNT (0x04000000) /* Clear SPI transfer counter */ ++#define MCF_DSPI_DTFDR3_EOQ (0x08000000) /* End of queue */ ++#define MCF_DSPI_DTFDR3_CTAS(x) (((x)&0x00000007)<<28) /* Clock and transfer attributes select */ ++#define MCF_DSPI_DTFDR3_CONT (0x80000000) /* Continuous peripheral chip-select enable */ ++ ++/* Bit definitions and macros for DRFDR group */ ++#define MCF_DSPI_DRFDR_RXDATA(x) (((x)&0x0000FFFF)) /* Receive data */ ++ ++/* Bit definitions and macros for DRFDR0 */ ++#define MCF_DSPI_DRFDR0_RXDATA(x) (((x)&0x0000FFFF)) /* Receive data */ ++ ++/* Bit definitions and macros for DRFDR1 */ ++#define MCF_DSPI_DRFDR1_RXDATA(x) (((x)&0x0000FFFF)) /* Receive data */ ++ ++/* Bit definitions and macros for DRFDR2 */ ++#define MCF_DSPI_DRFDR2_RXDATA(x) (((x)&0x0000FFFF)) /* Receive data */ ++ ++/* Bit definitions and macros for DRFDR3 */ ++#define MCF_DSPI_DRFDR3_RXDATA(x) (((x)&0x0000FFFF)) /* Receive data */ ++ ++/********************************************************************/ ++ ++#endif /* __MCF5445X_DSPI_H__ */ +--- /dev/null ++++ b/include/asm-m68k/mcf5445x_dtim.h +@@ -0,0 +1,87 @@ ++/* ++ * Matt Waddel Matt.Waddel@freescale.com ++ * ++ * Copyright Freescale Semiconductor, Inc. 2007 ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ */ ++ ++#ifndef __MCF5445X_DTIM_H__ ++#define __MCF5445X_DTIM_H__ ++ ++/********************************************************************* ++* ++* DMA Timers (DTIM) ++* ++*********************************************************************/ ++/* Register read/write macros */ ++#define MCF_DTIM0_DTMR 0xFC070000 /* DMA Timer Mode Register */ ++#define MCF_DTIM0_DTXMR 0xFC070002 /* DMA Timer Extended Mode Register */ ++#define MCF_DTIM0_DTER 0xFC070003 /* DMA Timer Event Register */ ++#define MCF_DTIM0_DTRR 0xFC070004 /* DMA Timer Reference Register */ ++#define MCF_DTIM0_DTCR 0xFC070008 /* DMA Timer Capture Register */ ++#define MCF_DTIM0_DTCN 0xFC07000C /* DMA Timer Counter Register */ ++#define MCF_DTIM1_DTMR 0xFC074000 /* DMA Timer Mode Register */ ++#define MCF_DTIM1_DTXMR 0xFC074002 /* DMA Timer Extended Mode Register */ ++#define MCF_DTIM1_DTER 0xFC074003 /* DMA Timer Event Register */ ++#define MCF_DTIM1_DTRR 0xFC074004 /* DMA Timer Reference Register */ ++#define MCF_DTIM1_DTCR 0xFC074008 /* DMA Timer Capture Register */ ++#define MCF_DTIM1_DTCN 0xFC07400C /* DMA Timer Counter Register */ ++#define MCF_DTIM2_DTMR 0xFC078000 /* DMA Timer Mode Register */ ++#define MCF_DTIM2_DTXMR 0xFC078002 /* DMA Timer Extended Mode Register */ ++#define MCF_DTIM2_DTER 0xFC078003 /* DMA Timer Event Register */ ++#define MCF_DTIM2_DTRR 0xFC078004 /* DMA Timer Reference Register */ ++#define MCF_DTIM2_DTCR 0xFC078008 /* DMA Timer Capture Register */ ++#define MCF_DTIM2_DTCN 0xFC07800C /* DMA Timer Counter Register */ ++#define MCF_DTIM3_DTMR 0xFC07C000 /* DMA Timer Mode Register */ ++#define MCF_DTIM3_DTXMR 0xFC07C002 /* DMA Timer Extended Mode Register */ ++#define MCF_DTIM3_DTER 0xFC07C003 /* DMA Timer Event Register */ ++#define MCF_DTIM3_DTRR 0xFC07C004 /* DMA Timer Reference Register */ ++#define MCF_DTIM3_DTCR 0xFC07C008 /* DMA Timer Capture Register */ ++#define MCF_DTIM3_DTCN 0xFC07C00C /* DMA Timer Counter Register */ ++ ++/* Parameterized register read/write macros for multiple modules */ ++#define MCF_DTIM_DTMR(x) 0xFC070000+((x)*0x4000) /* DMA Timer Mode Register */ ++#define MCF_DTIM_DTXMR(x) 0xFC070002+((x)*0x4000) /* DMA Timer Extended Mode Register */ ++#define MCF_DTIM_DTER(x) 0xFC070003+((x)*0x4000) /* DMA Timer Event Register */ ++#define MCF_DTIM_DTRR(x) 0xFC070004+((x)*0x4000) /* DMA Timer Reference Register */ ++#define MCF_DTIM_DTCR(x) 0xFC070008+((x)*0x4000) /* DMA Timer Capture Register */ ++#define MCF_DTIM_DTCN(x) 0xFC07000C+((x)*0x4000) /* DMA Timer Counter Register */ ++ ++/* Bit definitions and macros for DTMR */ ++#define MCF_DTIM_DTMR_RST (0x0001) /* Reset */ ++#define MCF_DTIM_DTMR_CLK(x) (((x)&0x0003)<<1) /* Input clock source */ ++#define MCF_DTIM_DTMR_FRR (0x0008) /* Free run/restart */ ++#define MCF_DTIM_DTMR_ORRI (0x0010) /* Output reference request/interrupt enable */ ++#define MCF_DTIM_DTMR_OM (0x0020) /* Output Mode */ ++#define MCF_DTIM_DTMR_CE(x) (((x)&0x0003)<<6) /* Capture Edge */ ++#define MCF_DTIM_DTMR_PS(x) (((x)&0x00FF)<<8) /* Prescaler value */ ++#define MCF_DTIM_DTMR_RST_EN (0x0001) ++#define MCF_DTIM_DTMR_RST_RST (0x0000) ++#define MCF_DTIM_DTMR_CE_ANY (0x00C0) ++#define MCF_DTIM_DTMR_CE_FALL (0x0080) ++#define MCF_DTIM_DTMR_CE_RISE (0x0040) ++#define MCF_DTIM_DTMR_CE_NONE (0x0000) ++#define MCF_DTIM_DTMR_CLK_DTIN (0x0006) ++#define MCF_DTIM_DTMR_CLK_DIV16 (0x0004) ++#define MCF_DTIM_DTMR_CLK_DIV1 (0x0002) ++#define MCF_DTIM_DTMR_CLK_STOP (0x0000) ++ ++/* Bit definitions and macros for DTXMR */ ++#define MCF_DTIM_DTXMR_MODE16 (0x01) /* Increment Mode */ ++#define MCF_DTIM_DTXMR_DMAEN (0x80) /* DMA request */ ++ ++/* Bit definitions and macros for DTER */ ++#define MCF_DTIM_DTER_CAP (0x01) /* Capture event */ ++#define MCF_DTIM_DTER_REF (0x02) /* Output reference event */ ++ ++/* Interrupts used for system timers */ ++#define MCFSIM_ICR_TIMER1 (0xFC048040+32) ++#define MCFSIM_ICR_TIMER2 (0xFC048040+33) ++ ++/********************************************************************/ ++ ++#endif /* __MCF5445X_DTIM_H__ */ +--- /dev/null ++++ b/include/asm-m68k/mcf5445x_edma.h +@@ -0,0 +1,1472 @@ ++/* ++ * Yaroslav Vinogradov yaroslav.vinogradov@freescale.com ++ * ++ * Copyright Freescale Semiconductor, Inc. 2007 ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ */ ++#ifndef __MCF5445X_EDMA_H__ ++#define __MCF5445X_EDMA_H__ ++ ++/* ++ * Enhanced DMA (EDMA) ++ */ ++ ++/* Channels */ ++#define MCF_EDMA_CHAN_DREQ0 0 /* External DMA request 0 */ ++#define MCF_EDMA_CHAN_DREQ1 1 /* External DMA request 1 */ ++#define MCF_EDMA_CHAN_UART0_RX 2 /* UART0 Receive */ ++#define MCF_EDMA_CHAN_UART0_TX 3 /* UART0 Transmit */ ++#define MCF_EDMA_CHAN_UART1_RX 4 /* UART1 Receive */ ++#define MCF_EDMA_CHAN_UART1_TX 5 /* UART1 Transmit */ ++#define MCF_EDMA_CHAN_UART2_RX 6 /* UART2 Receive */ ++#define MCF_EDMA_CHAN_UART2_TX 7 /* UART2 Transmit */ ++#define MCF_EDMA_CHAN_TIMER0 8 /* Timer 0 / SSI0 Rx */ ++#define MCF_EDMA_CHAN_TIMER1 9 /* Timer 1 / SSI1 Rx */ ++#define MCF_EDMA_CHAN_TIMER2 10 /* Timer 2 / SSI0 Tx */ ++#define MCF_EDMA_CHAN_TIMER3 11 /* Timer 3 / SSI1 Tx */ ++#define MCF_EDMA_CHAN_DSPI_RX 12 /* DSPI Receive */ ++#define MCF_EDMA_CHAN_DSPI_TX 13 /* DSPI Transmit */ ++#define MCF_EDMA_CHAN_ATA_RX 14 /* ATA Receive */ ++#define MCF_EDMA_CHAN_ATA_TX 15 /* ATA Transmit */ ++ ++/* Register read/write macros */ ++#define MCF_EDMA_CR MCF_REG32(0xFC044000) ++#define MCF_EDMA_ES MCF_REG32(0xFC044004) ++#define MCF_EDMA_ERQ MCF_REG16(0xFC04400E) ++#define MCF_EDMA_EEI MCF_REG16(0xFC044016) ++#define MCF_EDMA_SERQ MCF_REG08(0xFC044018) ++#define MCF_EDMA_CERQ MCF_REG08(0xFC044019) ++#define MCF_EDMA_SEEI MCF_REG08(0xFC04401A) ++#define MCF_EDMA_CEEI MCF_REG08(0xFC04401B) ++#define MCF_EDMA_CINT MCF_REG08(0xFC04401C) ++#define MCF_EDMA_CERR MCF_REG08(0xFC04401D) ++#define MCF_EDMA_SSRT MCF_REG08(0xFC04401E) ++#define MCF_EDMA_CDNE MCF_REG08(0xFC04401F) ++#define MCF_EDMA_INTR MCF_REG16(0xFC044026) ++#define MCF_EDMA_ERR MCF_REG16(0xFC04402E) ++#define MCF_EDMA_DCHPRI0 MCF_REG08(0xFC044100) ++#define MCF_EDMA_DCHPRI1 MCF_REG08(0xFC044101) ++#define MCF_EDMA_DCHPRI2 MCF_REG08(0xFC044102) ++#define MCF_EDMA_DCHPRI3 MCF_REG08(0xFC044103) ++#define MCF_EDMA_DCHPRI4 MCF_REG08(0xFC044104) ++#define MCF_EDMA_DCHPRI5 MCF_REG08(0xFC044105) ++#define MCF_EDMA_DCHPRI6 MCF_REG08(0xFC044106) ++#define MCF_EDMA_DCHPRI7 MCF_REG08(0xFC044107) ++#define MCF_EDMA_DCHPRI8 MCF_REG08(0xFC044108) ++#define MCF_EDMA_DCHPRI9 MCF_REG08(0xFC044109) ++#define MCF_EDMA_DCHPRI10 MCF_REG08(0xFC04410A) ++#define MCF_EDMA_DCHPRI11 MCF_REG08(0xFC04410B) ++#define MCF_EDMA_DCHPRI12 MCF_REG08(0xFC04410C) ++#define MCF_EDMA_DCHPRI13 MCF_REG08(0xFC04410D) ++#define MCF_EDMA_DCHPRI14 MCF_REG08(0xFC04410E) ++#define MCF_EDMA_DCHPRI15 MCF_REG08(0xFC04410F) ++#define MCF_EDMA_TCD0_SADDR MCF_REG32(0xFC045000) ++#define MCF_EDMA_TCD0_ATTR MCF_REG16(0xFC045004) ++#define MCF_EDMA_TCD0_SOFF MCF_REG16(0xFC045006) ++#define MCF_EDMA_TCD0_NBYTES MCF_REG32(0xFC045008) ++#define MCF_EDMA_TCD0_SLAST MCF_REG32(0xFC04500C) ++#define MCF_EDMA_TCD0_DADDR MCF_REG32(0xFC045010) ++#define MCF_EDMA_TCD0_CITER_ELINK MCF_REG16(0xFC045014) ++#define MCF_EDMA_TCD0_CITER MCF_REG16(0xFC045014) ++#define MCF_EDMA_TCD0_DOFF MCF_REG16(0xFC045016) ++#define MCF_EDMA_TCD0_DLAST_SGA MCF_REG32(0xFC045018) ++#define MCF_EDMA_TCD0_BITER_ELINK MCF_REG16(0xFC04501C) ++#define MCF_EDMA_TCD0_BITER MCF_REG16(0xFC04501C) ++#define MCF_EDMA_TCD0_CSR MCF_REG16(0xFC04501E) ++#define MCF_EDMA_TCD1_SADDR MCF_REG32(0xFC045020) ++#define MCF_EDMA_TCD1_ATTR MCF_REG16(0xFC045024) ++#define MCF_EDMA_TCD1_SOFF MCF_REG16(0xFC045026) ++#define MCF_EDMA_TCD1_NBYTES MCF_REG32(0xFC045028) ++#define MCF_EDMA_TCD1_SLAST MCF_REG32(0xFC04502C) ++#define MCF_EDMA_TCD1_DADDR MCF_REG32(0xFC045030) ++#define MCF_EDMA_TCD1_CITER_ELINK MCF_REG16(0xFC045034) ++#define MCF_EDMA_TCD1_CITER MCF_REG16(0xFC045034) ++#define MCF_EDMA_TCD1_DOFF MCF_REG16(0xFC045036) ++#define MCF_EDMA_TCD1_DLAST_SGA MCF_REG32(0xFC045038) ++#define MCF_EDMA_TCD1_BITER MCF_REG16(0xFC04503C) ++#define MCF_EDMA_TCD1_BITER_ELINK MCF_REG16(0xFC04503C) ++#define MCF_EDMA_TCD1_CSR MCF_REG16(0xFC04503E) ++#define MCF_EDMA_TCD2_SADDR MCF_REG32(0xFC045040) ++#define MCF_EDMA_TCD2_ATTR MCF_REG16(0xFC045044) ++#define MCF_EDMA_TCD2_SOFF MCF_REG16(0xFC045046) ++#define MCF_EDMA_TCD2_NBYTES MCF_REG32(0xFC045048) ++#define MCF_EDMA_TCD2_SLAST MCF_REG32(0xFC04504C) ++#define MCF_EDMA_TCD2_DADDR MCF_REG32(0xFC045050) ++#define MCF_EDMA_TCD2_CITER MCF_REG16(0xFC045054) ++#define MCF_EDMA_TCD2_CITER_ELINK MCF_REG16(0xFC045054) ++#define MCF_EDMA_TCD2_DOFF MCF_REG16(0xFC045056) ++#define MCF_EDMA_TCD2_DLAST_SGA MCF_REG32(0xFC045058) ++#define MCF_EDMA_TCD2_BITER_ELINK MCF_REG16(0xFC04505C) ++#define MCF_EDMA_TCD2_BITER MCF_REG16(0xFC04505C) ++#define MCF_EDMA_TCD2_CSR MCF_REG16(0xFC04505E) ++#define MCF_EDMA_TCD3_SADDR MCF_REG32(0xFC045060) ++#define MCF_EDMA_TCD3_ATTR MCF_REG16(0xFC045064) ++#define MCF_EDMA_TCD3_SOFF MCF_REG16(0xFC045066) ++#define MCF_EDMA_TCD3_NBYTES MCF_REG32(0xFC045068) ++#define MCF_EDMA_TCD3_SLAST MCF_REG32(0xFC04506C) ++#define MCF_EDMA_TCD3_DADDR MCF_REG32(0xFC045070) ++#define MCF_EDMA_TCD3_CITER MCF_REG16(0xFC045074) ++#define MCF_EDMA_TCD3_CITER_ELINK MCF_REG16(0xFC045074) ++#define MCF_EDMA_TCD3_DOFF MCF_REG16(0xFC045076) ++#define MCF_EDMA_TCD3_DLAST_SGA MCF_REG32(0xFC045078) ++#define MCF_EDMA_TCD3_BITER_ELINK MCF_REG16(0xFC04507C) ++#define MCF_EDMA_TCD3_BITER MCF_REG16(0xFC04507C) ++#define MCF_EDMA_TCD3_CSR MCF_REG16(0xFC04507E) ++#define MCF_EDMA_TCD4_SADDR MCF_REG32(0xFC045080) ++#define MCF_EDMA_TCD4_ATTR MCF_REG16(0xFC045084) ++#define MCF_EDMA_TCD4_SOFF MCF_REG16(0xFC045086) ++#define MCF_EDMA_TCD4_NBYTES MCF_REG32(0xFC045088) ++#define MCF_EDMA_TCD4_SLAST MCF_REG32(0xFC04508C) ++#define MCF_EDMA_TCD4_DADDR MCF_REG32(0xFC045090) ++#define MCF_EDMA_TCD4_CITER MCF_REG16(0xFC045094) ++#define MCF_EDMA_TCD4_CITER_ELINK MCF_REG16(0xFC045094) ++#define MCF_EDMA_TCD4_DOFF MCF_REG16(0xFC045096) ++#define MCF_EDMA_TCD4_DLAST_SGA MCF_REG32(0xFC045098) ++#define MCF_EDMA_TCD4_BITER MCF_REG16(0xFC04509C) ++#define MCF_EDMA_TCD4_BITER_ELINK MCF_REG16(0xFC04509C) ++#define MCF_EDMA_TCD4_CSR MCF_REG16(0xFC04509E) ++#define MCF_EDMA_TCD5_SADDR MCF_REG32(0xFC0450A0) ++#define MCF_EDMA_TCD5_ATTR MCF_REG16(0xFC0450A4) ++#define MCF_EDMA_TCD5_SOFF MCF_REG16(0xFC0450A6) ++#define MCF_EDMA_TCD5_NBYTES MCF_REG32(0xFC0450A8) ++#define MCF_EDMA_TCD5_SLAST MCF_REG32(0xFC0450AC) ++#define MCF_EDMA_TCD5_DADDR MCF_REG32(0xFC0450B0) ++#define MCF_EDMA_TCD5_CITER MCF_REG16(0xFC0450B4) ++#define MCF_EDMA_TCD5_CITER_ELINK MCF_REG16(0xFC0450B4) ++#define MCF_EDMA_TCD5_DOFF MCF_REG16(0xFC0450B6) ++#define MCF_EDMA_TCD5_DLAST_SGA MCF_REG32(0xFC0450B8) ++#define MCF_EDMA_TCD5_BITER_ELINK MCF_REG16(0xFC0450BC) ++#define MCF_EDMA_TCD5_BITER MCF_REG16(0xFC0450BC) ++#define MCF_EDMA_TCD5_CSR MCF_REG16(0xFC0450BE) ++#define MCF_EDMA_TCD6_SADDR MCF_REG32(0xFC0450C0) ++#define MCF_EDMA_TCD6_ATTR MCF_REG16(0xFC0450C4) ++#define MCF_EDMA_TCD6_SOFF MCF_REG16(0xFC0450C6) ++#define MCF_EDMA_TCD6_NBYTES MCF_REG32(0xFC0450C8) ++#define MCF_EDMA_TCD6_SLAST MCF_REG32(0xFC0450CC) ++#define MCF_EDMA_TCD6_DADDR MCF_REG32(0xFC0450D0) ++#define MCF_EDMA_TCD6_CITER MCF_REG16(0xFC0450D4) ++#define MCF_EDMA_TCD6_CITER_ELINK MCF_REG16(0xFC0450D4) ++#define MCF_EDMA_TCD6_DOFF MCF_REG16(0xFC0450D6) ++#define MCF_EDMA_TCD6_DLAST_SGA MCF_REG32(0xFC0450D8) ++#define MCF_EDMA_TCD6_BITER_ELINK MCF_REG16(0xFC0450DC) ++#define MCF_EDMA_TCD6_BITER MCF_REG16(0xFC0450DC) ++#define MCF_EDMA_TCD6_CSR MCF_REG16(0xFC0450DE) ++#define MCF_EDMA_TCD7_SADDR MCF_REG32(0xFC0450E0) ++#define MCF_EDMA_TCD7_ATTR MCF_REG16(0xFC0450E4) ++#define MCF_EDMA_TCD7_SOFF MCF_REG16(0xFC0450E6) ++#define MCF_EDMA_TCD7_NBYTES MCF_REG32(0xFC0450E8) ++#define MCF_EDMA_TCD7_SLAST MCF_REG32(0xFC0450EC) ++#define MCF_EDMA_TCD7_DADDR MCF_REG32(0xFC0450F0) ++#define MCF_EDMA_TCD7_CITER MCF_REG16(0xFC0450F4) ++#define MCF_EDMA_TCD7_CITER_ELINK MCF_REG16(0xFC0450F4) ++#define MCF_EDMA_TCD7_DOFF MCF_REG16(0xFC0450F6) ++#define MCF_EDMA_TCD7_DLAST_SGA MCF_REG32(0xFC0450F8) ++#define MCF_EDMA_TCD7_BITER_ELINK MCF_REG16(0xFC0450FC) ++#define MCF_EDMA_TCD7_BITER MCF_REG16(0xFC0450FC) ++#define MCF_EDMA_TCD7_CSR MCF_REG16(0xFC0450FE) ++#define MCF_EDMA_TCD8_SADDR MCF_REG32(0xFC045100) ++#define MCF_EDMA_TCD8_ATTR MCF_REG16(0xFC045104) ++#define MCF_EDMA_TCD8_SOFF MCF_REG16(0xFC045106) ++#define MCF_EDMA_TCD8_NBYTES MCF_REG32(0xFC045108) ++#define MCF_EDMA_TCD8_SLAST MCF_REG32(0xFC04510C) ++#define MCF_EDMA_TCD8_DADDR MCF_REG32(0xFC045110) ++#define MCF_EDMA_TCD8_CITER MCF_REG16(0xFC045114) ++#define MCF_EDMA_TCD8_CITER_ELINK MCF_REG16(0xFC045114) ++#define MCF_EDMA_TCD8_DOFF MCF_REG16(0xFC045116) ++#define MCF_EDMA_TCD8_DLAST_SGA MCF_REG32(0xFC045118) ++#define MCF_EDMA_TCD8_BITER_ELINK MCF_REG16(0xFC04511C) ++#define MCF_EDMA_TCD8_BITER MCF_REG16(0xFC04511C) ++#define MCF_EDMA_TCD8_CSR MCF_REG16(0xFC04511E) ++#define MCF_EDMA_TCD9_SADDR MCF_REG32(0xFC045120) ++#define MCF_EDMA_TCD9_ATTR MCF_REG16(0xFC045124) ++#define MCF_EDMA_TCD9_SOFF MCF_REG16(0xFC045126) ++#define MCF_EDMA_TCD9_NBYTES MCF_REG32(0xFC045128) ++#define MCF_EDMA_TCD9_SLAST MCF_REG32(0xFC04512C) ++#define MCF_EDMA_TCD9_DADDR MCF_REG32(0xFC045130) ++#define MCF_EDMA_TCD9_CITER_ELINK MCF_REG16(0xFC045134) ++#define MCF_EDMA_TCD9_CITER MCF_REG16(0xFC045134) ++#define MCF_EDMA_TCD9_DOFF MCF_REG16(0xFC045136) ++#define MCF_EDMA_TCD9_DLAST_SGA MCF_REG32(0xFC045138) ++#define MCF_EDMA_TCD9_BITER_ELINK MCF_REG16(0xFC04513C) ++#define MCF_EDMA_TCD9_BITER MCF_REG16(0xFC04513C) ++#define MCF_EDMA_TCD9_CSR MCF_REG16(0xFC04513E) ++#define MCF_EDMA_TCD10_SADDR MCF_REG32(0xFC045140) ++#define MCF_EDMA_TCD10_ATTR MCF_REG16(0xFC045144) ++#define MCF_EDMA_TCD10_SOFF MCF_REG16(0xFC045146) ++#define MCF_EDMA_TCD10_NBYTES MCF_REG32(0xFC045148) ++#define MCF_EDMA_TCD10_SLAST MCF_REG32(0xFC04514C) ++#define MCF_EDMA_TCD10_DADDR MCF_REG32(0xFC045150) ++#define MCF_EDMA_TCD10_CITER_ELINK MCF_REG16(0xFC045154) ++#define MCF_EDMA_TCD10_CITER MCF_REG16(0xFC045154) ++#define MCF_EDMA_TCD10_DOFF MCF_REG16(0xFC045156) ++#define MCF_EDMA_TCD10_DLAST_SGA MCF_REG32(0xFC045158) ++#define MCF_EDMA_TCD10_BITER MCF_REG16(0xFC04515C) ++#define MCF_EDMA_TCD10_BITER_ELINK MCF_REG16(0xFC04515C) ++#define MCF_EDMA_TCD10_CSR MCF_REG16(0xFC04515E) ++#define MCF_EDMA_TCD11_SADDR MCF_REG32(0xFC045160) ++#define MCF_EDMA_TCD11_ATTR MCF_REG16(0xFC045164) ++#define MCF_EDMA_TCD11_SOFF MCF_REG16(0xFC045166) ++#define MCF_EDMA_TCD11_NBYTES MCF_REG32(0xFC045168) ++#define MCF_EDMA_TCD11_SLAST MCF_REG32(0xFC04516C) ++#define MCF_EDMA_TCD11_DADDR MCF_REG32(0xFC045170) ++#define MCF_EDMA_TCD11_CITER MCF_REG16(0xFC045174) ++#define MCF_EDMA_TCD11_CITER_ELINK MCF_REG16(0xFC045174) ++#define MCF_EDMA_TCD11_DOFF MCF_REG16(0xFC045176) ++#define MCF_EDMA_TCD11_DLAST_SGA MCF_REG32(0xFC045178) ++#define MCF_EDMA_TCD11_BITER MCF_REG16(0xFC04517C) ++#define MCF_EDMA_TCD11_BITER_ELINK MCF_REG16(0xFC04517C) ++#define MCF_EDMA_TCD11_CSR MCF_REG16(0xFC04517E) ++#define MCF_EDMA_TCD12_SADDR MCF_REG32(0xFC045180) ++#define MCF_EDMA_TCD12_ATTR MCF_REG16(0xFC045184) ++#define MCF_EDMA_TCD12_SOFF MCF_REG16(0xFC045186) ++#define MCF_EDMA_TCD12_NBYTES MCF_REG32(0xFC045188) ++#define MCF_EDMA_TCD12_SLAST MCF_REG32(0xFC04518C) ++#define MCF_EDMA_TCD12_DADDR MCF_REG32(0xFC045190) ++#define MCF_EDMA_TCD12_CITER MCF_REG16(0xFC045194) ++#define MCF_EDMA_TCD12_CITER_ELINK MCF_REG16(0xFC045194) ++#define MCF_EDMA_TCD12_DOFF MCF_REG16(0xFC045196) ++#define MCF_EDMA_TCD12_DLAST_SGA MCF_REG32(0xFC045198) ++#define MCF_EDMA_TCD12_BITER MCF_REG16(0xFC04519C) ++#define MCF_EDMA_TCD12_BITER_ELINK MCF_REG16(0xFC04519C) ++#define MCF_EDMA_TCD12_CSR MCF_REG16(0xFC04519E) ++#define MCF_EDMA_TCD13_SADDR MCF_REG32(0xFC0451A0) ++#define MCF_EDMA_TCD13_ATTR MCF_REG16(0xFC0451A4) ++#define MCF_EDMA_TCD13_SOFF MCF_REG16(0xFC0451A6) ++#define MCF_EDMA_TCD13_NBYTES MCF_REG32(0xFC0451A8) ++#define MCF_EDMA_TCD13_SLAST MCF_REG32(0xFC0451AC) ++#define MCF_EDMA_TCD13_DADDR MCF_REG32(0xFC0451B0) ++#define MCF_EDMA_TCD13_CITER_ELINK MCF_REG16(0xFC0451B4) ++#define MCF_EDMA_TCD13_CITER MCF_REG16(0xFC0451B4) ++#define MCF_EDMA_TCD13_DOFF MCF_REG16(0xFC0451B6) ++#define MCF_EDMA_TCD13_DLAST_SGA MCF_REG32(0xFC0451B8) ++#define MCF_EDMA_TCD13_BITER_ELINK MCF_REG16(0xFC0451BC) ++#define MCF_EDMA_TCD13_BITER MCF_REG16(0xFC0451BC) ++#define MCF_EDMA_TCD13_CSR MCF_REG16(0xFC0451BE) ++#define MCF_EDMA_TCD14_SADDR MCF_REG32(0xFC0451C0) ++#define MCF_EDMA_TCD14_ATTR MCF_REG16(0xFC0451C4) ++#define MCF_EDMA_TCD14_SOFF MCF_REG16(0xFC0451C6) ++#define MCF_EDMA_TCD14_NBYTES MCF_REG32(0xFC0451C8) ++#define MCF_EDMA_TCD14_SLAST MCF_REG32(0xFC0451CC) ++#define MCF_EDMA_TCD14_DADDR MCF_REG32(0xFC0451D0) ++#define MCF_EDMA_TCD14_CITER MCF_REG16(0xFC0451D4) ++#define MCF_EDMA_TCD14_CITER_ELINK MCF_REG16(0xFC0451D4) ++#define MCF_EDMA_TCD14_DOFF MCF_REG16(0xFC0451D6) ++#define MCF_EDMA_TCD14_DLAST_SGA MCF_REG32(0xFC0451D8) ++#define MCF_EDMA_TCD14_BITER_ELINK MCF_REG16(0xFC0451DC) ++#define MCF_EDMA_TCD14_BITER MCF_REG16(0xFC0451DC) ++#define MCF_EDMA_TCD14_CSR MCF_REG16(0xFC0451DE) ++#define MCF_EDMA_TCD15_SADDR MCF_REG32(0xFC0451E0) ++#define MCF_EDMA_TCD15_ATTR MCF_REG16(0xFC0451E4) ++#define MCF_EDMA_TCD15_SOFF MCF_REG16(0xFC0451E6) ++#define MCF_EDMA_TCD15_NBYTES MCF_REG32(0xFC0451E8) ++#define MCF_EDMA_TCD15_SLAST MCF_REG32(0xFC0451EC) ++#define MCF_EDMA_TCD15_DADDR MCF_REG32(0xFC0451F0) ++#define MCF_EDMA_TCD15_CITER_ELINK MCF_REG16(0xFC0451F4) ++#define MCF_EDMA_TCD15_CITER MCF_REG16(0xFC0451F4) ++#define MCF_EDMA_TCD15_DOFF MCF_REG16(0xFC0451F6) ++#define MCF_EDMA_TCD15_DLAST_SGA MCF_REG32(0xFC0451F8) ++#define MCF_EDMA_TCD15_BITER MCF_REG16(0xFC0451FC) ++#define MCF_EDMA_TCD15_BITER_ELINK MCF_REG16(0xFC0451FC) ++#define MCF_EDMA_TCD15_CSR MCF_REG16(0xFC0451FE) ++ ++/* Parameterized register read/write macros for multiple registers */ ++#define MCF_EDMA_DCHPRI(x) MCF_REG08(0xFC044100+((x)*0x001)) ++#define MCF_EDMA_TCD_SADDR(x) MCF_REG32(0xFC045000+((x)*0x020)) ++#define MCF_EDMA_TCD_ATTR(x) MCF_REG16(0xFC045004+((x)*0x020)) ++#define MCF_EDMA_TCD_SOFF(x) MCF_REG16(0xFC045006+((x)*0x020)) ++#define MCF_EDMA_TCD_NBYTES(x) MCF_REG32(0xFC045008+((x)*0x020)) ++#define MCF_EDMA_TCD_SLAST(x) MCF_REG32(0xFC04500C+((x)*0x020)) ++#define MCF_EDMA_TCD_DADDR(x) MCF_REG32(0xFC045010+((x)*0x020)) ++#define MCF_EDMA_TCD_CITER_ELINK(x) MCF_REG16(0xFC045014+((x)*0x020)) ++#define MCF_EDMA_TCD_CITER(x) MCF_REG16(0xFC045014+((x)*0x020)) ++#define MCF_EDMA_TCD_DOFF(x) MCF_REG16(0xFC045016+((x)*0x020)) ++#define MCF_EDMA_TCD_DLAST_SGA(x) MCF_REG32(0xFC045018+((x)*0x020)) ++#define MCF_EDMA_TCD_BITER_ELINK(x) MCF_REG16(0xFC04501C+((x)*0x020)) ++#define MCF_EDMA_TCD_BITER(x) MCF_REG16(0xFC04501C+((x)*0x020)) ++#define MCF_EDMA_TCD_CSR(x) MCF_REG16(0xFC04501e +((x)*0x020)) ++ ++/* Bit definitions and macros for CR */ ++#define MCF_EDMA_CR_EDBG (0x00000002) ++#define MCF_EDMA_CR_ERCA (0x00000004) ++ ++/* Bit definitions and macros for ES */ ++#define MCF_EDMA_ES_DBE (0x00000001) ++#define MCF_EDMA_ES_SBE (0x00000002) ++#define MCF_EDMA_ES_SGE (0x00000004) ++#define MCF_EDMA_ES_NCE (0x00000008) ++#define MCF_EDMA_ES_DOE (0x00000010) ++#define MCF_EDMA_ES_DAE (0x00000020) ++#define MCF_EDMA_ES_SOE (0x00000040) ++#define MCF_EDMA_ES_SAE (0x00000080) ++#define MCF_EDMA_ES_ERRCHN(x) (((x)&0x0000000F)<<8) ++#define MCF_EDMA_ES_CPE (0x00004000) ++#define MCF_EDMA_ES_VLD (0x80000000) ++ ++/* Bit definitions and macros for ERQ */ ++#define MCF_EDMA_ERQ_ERQ0 (0x0001) ++#define MCF_EDMA_ERQ_ERQ1 (0x0002) ++#define MCF_EDMA_ERQ_ERQ2 (0x0004) ++#define MCF_EDMA_ERQ_ERQ3 (0x0008) ++#define MCF_EDMA_ERQ_ERQ4 (0x0010) ++#define MCF_EDMA_ERQ_ERQ5 (0x0020) ++#define MCF_EDMA_ERQ_ERQ6 (0x0040) ++#define MCF_EDMA_ERQ_ERQ7 (0x0080) ++#define MCF_EDMA_ERQ_ERQ8 (0x0100) ++#define MCF_EDMA_ERQ_ERQ9 (0x0200) ++#define MCF_EDMA_ERQ_ERQ10 (0x0400) ++#define MCF_EDMA_ERQ_ERQ11 (0x0800) ++#define MCF_EDMA_ERQ_ERQ12 (0x1000) ++#define MCF_EDMA_ERQ_ERQ13 (0x2000) ++#define MCF_EDMA_ERQ_ERQ14 (0x4000) ++#define MCF_EDMA_ERQ_ERQ15 (0x8000) ++ ++/* Bit definitions and macros for EEI */ ++#define MCF_EDMA_EEI_EEI0 (0x0001) ++#define MCF_EDMA_EEI_EEI1 (0x0002) ++#define MCF_EDMA_EEI_EEI2 (0x0004) ++#define MCF_EDMA_EEI_EEI3 (0x0008) ++#define MCF_EDMA_EEI_EEI4 (0x0010) ++#define MCF_EDMA_EEI_EEI5 (0x0020) ++#define MCF_EDMA_EEI_EEI6 (0x0040) ++#define MCF_EDMA_EEI_EEI7 (0x0080) ++#define MCF_EDMA_EEI_EEI8 (0x0100) ++#define MCF_EDMA_EEI_EEI9 (0x0200) ++#define MCF_EDMA_EEI_EEI10 (0x0400) ++#define MCF_EDMA_EEI_EEI11 (0x0800) ++#define MCF_EDMA_EEI_EEI12 (0x1000) ++#define MCF_EDMA_EEI_EEI13 (0x2000) ++#define MCF_EDMA_EEI_EEI14 (0x4000) ++#define MCF_EDMA_EEI_EEI15 (0x8000) ++ ++/* Bit definitions and macros for SERQ */ ++#define MCF_EDMA_SERQ_SERQ(x) (((x)&0x0F)) ++#define MCF_EDMA_SERQ_SAER (0x40) ++ ++/* Bit definitions and macros for CERQ */ ++#define MCF_EDMA_CERQ_CERQ(x) (((x)&0x0F)) ++#define MCF_EDMA_CERQ_CAER (0x40) ++ ++/* Bit definitions and macros for SEEI */ ++#define MCF_EDMA_SEEI_SEEI(x) (((x)&0x0F)) ++#define MCF_EDMA_SEEI_SAEE (0x40) ++ ++/* Bit definitions and macros for CEEI */ ++#define MCF_EDMA_CEEI_CEEI(x) (((x)&0x0F)) ++#define MCF_EDMA_CEEI_CAEE (0x40) ++ ++/* Bit definitions and macros for CINT */ ++#define MCF_EDMA_CINT_CINT(x) (((x)&0x0F)) ++#define MCF_EDMA_CINT_CAIR (0x40) ++ ++/* Bit definitions and macros for CERR */ ++#define MCF_EDMA_CERR_CERR(x) (((x)&0x0F)) ++#define MCF_EDMA_CERR_CAER (0x40) ++ ++/* Bit definitions and macros for SSRT */ ++#define MCF_EDMA_SSRT_SSRT(x) (((x)&0x0F)) ++#define MCF_EDMA_SSRT_SAST (0x40) ++ ++/* Bit definitions and macros for CDNE */ ++#define MCF_EDMA_CDNE_CDNE(x) (((x)&0x0F)) ++#define MCF_EDMA_CDNE_CADN (0x40) ++ ++/* Bit definitions and macros for INTR */ ++#define MCF_EDMA_INTR_INT0 (0x0001) ++#define MCF_EDMA_INTR_INT1 (0x0002) ++#define MCF_EDMA_INTR_INT2 (0x0004) ++#define MCF_EDMA_INTR_INT3 (0x0008) ++#define MCF_EDMA_INTR_INT4 (0x0010) ++#define MCF_EDMA_INTR_INT5 (0x0020) ++#define MCF_EDMA_INTR_INT6 (0x0040) ++#define MCF_EDMA_INTR_INT7 (0x0080) ++#define MCF_EDMA_INTR_INT8 (0x0100) ++#define MCF_EDMA_INTR_INT9 (0x0200) ++#define MCF_EDMA_INTR_INT10 (0x0400) ++#define MCF_EDMA_INTR_INT11 (0x0800) ++#define MCF_EDMA_INTR_INT12 (0x1000) ++#define MCF_EDMA_INTR_INT13 (0x2000) ++#define MCF_EDMA_INTR_INT14 (0x4000) ++#define MCF_EDMA_INTR_INT15 (0x8000) ++ ++/* Bit definitions and macros for ERR */ ++#define MCF_EDMA_ERR_ERR0 (0x0001) ++#define MCF_EDMA_ERR_ERR1 (0x0002) ++#define MCF_EDMA_ERR_ERR2 (0x0004) ++#define MCF_EDMA_ERR_ERR3 (0x0008) ++#define MCF_EDMA_ERR_ERR4 (0x0010) ++#define MCF_EDMA_ERR_ERR5 (0x0020) ++#define MCF_EDMA_ERR_ERR6 (0x0040) ++#define MCF_EDMA_ERR_ERR7 (0x0080) ++#define MCF_EDMA_ERR_ERR8 (0x0100) ++#define MCF_EDMA_ERR_ERR9 (0x0200) ++#define MCF_EDMA_ERR_ERR10 (0x0400) ++#define MCF_EDMA_ERR_ERR11 (0x0800) ++#define MCF_EDMA_ERR_ERR12 (0x1000) ++#define MCF_EDMA_ERR_ERR13 (0x2000) ++#define MCF_EDMA_ERR_ERR14 (0x4000) ++#define MCF_EDMA_ERR_ERR15 (0x8000) ++ ++/* Bit definitions and macros for DCHPRI group */ ++#define MCF_EDMA_DCHPRI_CHPRI(x) (((x)&0x0F)) ++#define MCF_EDMA_DCHPRI_ECP (0x80) ++ ++/* Bit definitions and macros for DCHPRI0 */ ++#define MCF_EDMA_DCHPRI0_CHPRI(x) (((x)&0x0F)) ++#define MCF_EDMA_DCHPRI0_ECP (0x80) ++ ++/* Bit definitions and macros for DCHPRI1 */ ++#define MCF_EDMA_DCHPRI1_CHPRI(x) (((x)&0x0F)) ++#define MCF_EDMA_DCHPRI1_ECP (0x80) ++ ++/* Bit definitions and macros for DCHPRI2 */ ++#define MCF_EDMA_DCHPRI2_CHPRI(x) (((x)&0x0F)) ++#define MCF_EDMA_DCHPRI2_ECP (0x80) ++ ++/* Bit definitions and macros for DCHPRI3 */ ++#define MCF_EDMA_DCHPRI3_CHPRI(x) (((x)&0x0F)) ++#define MCF_EDMA_DCHPRI3_ECP (0x80) ++ ++/* Bit definitions and macros for DCHPRI4 */ ++#define MCF_EDMA_DCHPRI4_CHPRI(x) (((x)&0x0F)) ++#define MCF_EDMA_DCHPRI4_ECP (0x80) ++ ++/* Bit definitions and macros for DCHPRI5 */ ++#define MCF_EDMA_DCHPRI5_CHPRI(x) (((x)&0x0F)) ++#define MCF_EDMA_DCHPRI5_ECP (0x80) ++ ++/* Bit definitions and macros for DCHPRI6 */ ++#define MCF_EDMA_DCHPRI6_CHPRI(x) (((x)&0x0F)) ++#define MCF_EDMA_DCHPRI6_ECP (0x80) ++ ++/* Bit definitions and macros for DCHPRI7 */ ++#define MCF_EDMA_DCHPRI7_CHPRI(x) (((x)&0x0F)) ++#define MCF_EDMA_DCHPRI7_ECP (0x80) ++ ++/* Bit definitions and macros for DCHPRI8 */ ++#define MCF_EDMA_DCHPRI8_CHPRI(x) (((x)&0x0F)) ++#define MCF_EDMA_DCHPRI8_ECP (0x80) ++ ++/* Bit definitions and macros for DCHPRI9 */ ++#define MCF_EDMA_DCHPRI9_CHPRI(x) (((x)&0x0F)) ++#define MCF_EDMA_DCHPRI9_ECP (0x80) ++ ++/* Bit definitions and macros for DCHPRI10 */ ++#define MCF_EDMA_DCHPRI10_CHPRI(x) (((x)&0x0F)) ++#define MCF_EDMA_DCHPRI10_ECP (0x80) ++ ++/* Bit definitions and macros for DCHPRI11 */ ++#define MCF_EDMA_DCHPRI11_CHPRI(x) (((x)&0x0F)) ++#define MCF_EDMA_DCHPRI11_ECP (0x80) ++ ++/* Bit definitions and macros for DCHPRI12 */ ++#define MCF_EDMA_DCHPRI12_CHPRI(x) (((x)&0x0F)) ++#define MCF_EDMA_DCHPRI12_ECP (0x80) ++ ++/* Bit definitions and macros for DCHPRI13 */ ++#define MCF_EDMA_DCHPRI13_CHPRI(x) (((x)&0x0F)) ++#define MCF_EDMA_DCHPRI13_ECP (0x80) ++ ++/* Bit definitions and macros for DCHPRI14 */ ++#define MCF_EDMA_DCHPRI14_CHPRI(x) (((x)&0x0F)) ++#define MCF_EDMA_DCHPRI14_ECP (0x80) ++ ++/* Bit definitions and macros for DCHPRI15 */ ++#define MCF_EDMA_DCHPRI15_CHPRI(x) (((x)&0x0F)) ++#define MCF_EDMA_DCHPRI15_ECP (0x80) ++ ++/* Bit definitions and macros for TCD_SADDR group */ ++#define MCF_EDMA_TCD_SADDR_SADDR(x) (x) ++ ++/* Bit definitions and macros for TCD0_SADDR */ ++#define MCF_EDMA_TCD0_SADDR_SADDR(x) (x) ++ ++/* Bit definitions and macros for TCD_ATTR group */ ++#define MCF_EDMA_TCD_ATTR_DSIZE(x) (((x)&0x0007)) ++#define MCF_EDMA_TCD_ATTR_DMOD(x) (((x)&0x001F)<<3) ++#define MCF_EDMA_TCD_ATTR_SSIZE(x) (((x)&0x0007)<<8) ++#define MCF_EDMA_TCD_ATTR_SMOD(x) (((x)&0x001F)<<11) ++#define MCF_EDMA_TCD_ATTR_SSIZE_8BIT (0x0000) ++#define MCF_EDMA_TCD_ATTR_SSIZE_16BIT (0x0100) ++#define MCF_EDMA_TCD_ATTR_SSIZE_32BIT (0x0200) ++#define MCF_EDMA_TCD_ATTR_SSIZE_16BYTE (0x0400) ++#define MCF_EDMA_TCD_ATTR_DSIZE_8BIT (0x0000) ++#define MCF_EDMA_TCD_ATTR_DSIZE_16BIT (0x0001) ++#define MCF_EDMA_TCD_ATTR_DSIZE_32BIT (0x0002) ++#define MCF_EDMA_TCD_ATTR_DSIZE_16BYTE (0x0004) ++ ++/* Bit definitions and macros for TCD0_ATTR */ ++#define MCF_EDMA_TCD0_ATTR_DSIZE(x) (((x)&0x0007)) ++#define MCF_EDMA_TCD0_ATTR_DMOD(x) (((x)&0x001F)<<3) ++#define MCF_EDMA_TCD0_ATTR_SSIZE(x) (((x)&0x0007)<<8) ++#define MCF_EDMA_TCD0_ATTR_SMOD(x) (((x)&0x001F)<<11) ++#define MCF_EDMA_TCD0_ATTR_SSIZE_8BIT (0x0000) ++#define MCF_EDMA_TCD0_ATTR_SSIZE_16BIT (0x0100) ++#define MCF_EDMA_TCD0_ATTR_SSIZE_32BIT (0x0200) ++#define MCF_EDMA_TCD0_ATTR_SSIZE_16BYTE (0x0400) ++#define MCF_EDMA_TCD0_ATTR_DSIZE_8BIT (0x0000) ++#define MCF_EDMA_TCD0_ATTR_DSIZE_16BIT (0x0001) ++#define MCF_EDMA_TCD0_ATTR_DSIZE_32BIT (0x0002) ++#define MCF_EDMA_TCD0_ATTR_DSIZE_16BYTE (0x0004) ++ ++/* Bit definitions and macros for TCD_SOFF group */ ++#define MCF_EDMA_TCD_SOFF_SOFF(x) (x) ++ ++/* Bit definitions and macros for TCD0_SOFF */ ++#define MCF_EDMA_TCD0_SOFF_SOFF(x) (x) ++ ++/* Bit definitions and macros for TCD_NBYTES group */ ++#define MCF_EDMA_TCD_NBYTES_NBYTES(x) (x) ++ ++/* Bit definitions and macros for TCD0_NBYTES */ ++#define MCF_EDMA_TCD0_NBYTES_NBYTES(x) (x) ++ ++/* Bit definitions and macros for TCD_SLAST group */ ++#define MCF_EDMA_TCD_SLAST_SLAST(x) (x) ++ ++/* Bit definitions and macros for TCD0_SLAST */ ++#define MCF_EDMA_TCD0_SLAST_SLAST(x) (x) ++ ++/* Bit definitions and macros for TCD_DADDR group */ ++#define MCF_EDMA_TCD_DADDR_DADDR(x) (x) ++ ++/* Bit definitions and macros for TCD0_DADDR */ ++#define MCF_EDMA_TCD0_DADDR_DADDR(x) (x) ++ ++/* Bit definitions and macros for TCD_CITER_ELINK group */ ++#define MCF_EDMA_TCD_CITER_ELINK_CITER(x) (((x)&0x01FF)) ++#define MCF_EDMA_TCD_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) ++#define MCF_EDMA_TCD_CITER_ELINK_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD0_CITER_ELINK */ ++#define MCF_EDMA_TCD0_CITER_ELINK_CITER(x) (((x)&0x01FF)) ++#define MCF_EDMA_TCD0_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) ++#define MCF_EDMA_TCD0_CITER_ELINK_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD_CITER group */ ++#define MCF_EDMA_TCD_CITER_CITER(x) (((x)&0x7FFF)) ++#define MCF_EDMA_TCD_CITER_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD0_CITER */ ++#define MCF_EDMA_TCD0_CITER_CITER(x) (((x)&0x7FFF)) ++#define MCF_EDMA_TCD0_CITER_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD_DOFF group */ ++#define MCF_EDMA_TCD_DOFF_DOFF(x) (x) ++ ++/* Bit definitions and macros for TCD0_DOFF */ ++#define MCF_EDMA_TCD0_DOFF_DOFF(x) (x) ++ ++/* Bit definitions and macros for TCD_DLAST_SGA group */ ++#define MCF_EDMA_TCD_DLAST_SGA_DLAST_SGA(x) (x) ++ ++/* Bit definitions and macros for TCD0_DLAST_SGA */ ++#define MCF_EDMA_TCD0_DLAST_SGA_DLAST_SGA(x) (x) ++ ++/* Bit definitions and macros for TCD_BITER_ELINK group */ ++#define MCF_EDMA_TCD_BITER_ELINK_BITER(x) (((x)&0x01FF)) ++#define MCF_EDMA_TCD_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) ++#define MCF_EDMA_TCD_BITER_ELINK_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD0_BITER_ELINK */ ++#define MCF_EDMA_TCD0_BITER_ELINK_BITER(x) (((x)&0x01FF)) ++#define MCF_EDMA_TCD0_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) ++#define MCF_EDMA_TCD0_BITER_ELINK_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD_BITER group */ ++#define MCF_EDMA_TCD_BITER_BITER(x) (((x)&0x7FFF)) ++#define MCF_EDMA_TCD_BITER_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD0_BITER */ ++#define MCF_EDMA_TCD0_BITER_BITER(x) (((x)&0x7FFF)) ++#define MCF_EDMA_TCD0_BITER_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD_CSR group */ ++#define MCF_EDMA_TCD_CSR_START (0x0001) ++#define MCF_EDMA_TCD_CSR_INT_MAJOR (0x0002) ++#define MCF_EDMA_TCD_CSR_INT_HALF (0x0004) ++#define MCF_EDMA_TCD_CSR_D_REQ (0x0008) ++#define MCF_EDMA_TCD_CSR_E_SG (0x0010) ++#define MCF_EDMA_TCD_CSR_E_LINK (0x0020) ++#define MCF_EDMA_TCD_CSR_ACTIVE (0x0040) ++#define MCF_EDMA_TCD_CSR_DONE (0x0080) ++#define MCF_EDMA_TCD_CSR_LINKCH(x) (((x)&0x003F)<<8) ++#define MCF_EDMA_TCD_CSR_BWC(x) (((x)&0x0003)<<14) ++#define MCF_EDMA_TCD_CSR_BWC_NO_STALL (0x0000) ++#define MCF_EDMA_TCD_CSR_BWC_4CYC_STALL (0x8000) ++#define MCF_EDMA_TCD_CSR_BWC_8CYC_STALL (0xC000) ++ ++/* Bit definitions and macros for TCD0_CSR */ ++#define MCF_EDMA_TCD0_CSR_START (0x0001) ++#define MCF_EDMA_TCD0_CSR_INT_MAJOR (0x0002) ++#define MCF_EDMA_TCD0_CSR_INT_HALF (0x0004) ++#define MCF_EDMA_TCD0_CSR_D_REQ (0x0008) ++#define MCF_EDMA_TCD0_CSR_E_SG (0x0010) ++#define MCF_EDMA_TCD0_CSR_E_LINK (0x0020) ++#define MCF_EDMA_TCD0_CSR_ACTIVE (0x0040) ++#define MCF_EDMA_TCD0_CSR_DONE (0x0080) ++#define MCF_EDMA_TCD0_CSR_LINKCH(x) (((x)&0x003F)<<8) ++#define MCF_EDMA_TCD0_CSR_BWC(x) (((x)&0x0003)<<14) ++#define MCF_EDMA_TCD0_CSR_BWC_NO_STALL (0x0000) ++#define MCF_EDMA_TCD0_CSR_BWC_4CYC_STALL (0x8000) ++#define MCF_EDMA_TCD0_CSR_BWC_8CYC_STALL (0xC000) ++ ++/* Bit definitions and macros for TCD1_SADDR */ ++#define MCF_EDMA_TCD1_SADDR_SADDR(x) (x) ++ ++/* Bit definitions and macros for TCD1_ATTR */ ++#define MCF_EDMA_TCD1_ATTR_DSIZE(x) (((x)&0x0007)) ++#define MCF_EDMA_TCD1_ATTR_DMOD(x) (((x)&0x001F)<<3) ++#define MCF_EDMA_TCD1_ATTR_SSIZE(x) (((x)&0x0007)<<8) ++#define MCF_EDMA_TCD1_ATTR_SMOD(x) (((x)&0x001F)<<11) ++ ++/* Bit definitions and macros for TCD1_SOFF */ ++#define MCF_EDMA_TCD1_SOFF_SOFF(x) (x) ++ ++/* Bit definitions and macros for TCD1_NBYTES */ ++#define MCF_EDMA_TCD1_NBYTES_NBYTES(x) (x) ++ ++/* Bit definitions and macros for TCD1_SLAST */ ++#define MCF_EDMA_TCD1_SLAST_SLAST(x) (x) ++ ++/* Bit definitions and macros for TCD1_DADDR */ ++#define MCF_EDMA_TCD1_DADDR_DADDR(x) (x) ++ ++/* Bit definitions and macros for TCD1_CITER_ELINK */ ++#define MCF_EDMA_TCD1_CITER_ELINK_CITER(x) (((x)&0x01FF)) ++#define MCF_EDMA_TCD1_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) ++#define MCF_EDMA_TCD1_CITER_ELINK_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD1_CITER */ ++#define MCF_EDMA_TCD1_CITER_CITER(x) (((x)&0x7FFF)) ++#define MCF_EDMA_TCD1_CITER_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD1_DOFF */ ++#define MCF_EDMA_TCD1_DOFF_DOFF(x) (x) ++ ++/* Bit definitions and macros for TCD1_DLAST_SGA */ ++#define MCF_EDMA_TCD1_DLAST_SGA_DLAST_SGA(x) (x) ++ ++/* Bit definitions and macros for TCD1_BITER */ ++#define MCF_EDMA_TCD1_BITER_BITER(x) (((x)&0x7FFF)) ++#define MCF_EDMA_TCD1_BITER_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD1_BITER_ELINK */ ++#define MCF_EDMA_TCD1_BITER_ELINK_BITER(x) (((x)&0x01FF)) ++#define MCF_EDMA_TCD1_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) ++#define MCF_EDMA_TCD1_BITER_ELINK_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD1_CSR */ ++#define MCF_EDMA_TCD1_CSR_START (0x0001) ++#define MCF_EDMA_TCD1_CSR_INT_MAJOR (0x0002) ++#define MCF_EDMA_TCD1_CSR_INT_HALF (0x0004) ++#define MCF_EDMA_TCD1_CSR_D_REQ (0x0008) ++#define MCF_EDMA_TCD1_CSR_E_SG (0x0010) ++#define MCF_EDMA_TCD1_CSR_E_LINK (0x0020) ++#define MCF_EDMA_TCD1_CSR_ACTIVE (0x0040) ++#define MCF_EDMA_TCD1_CSR_DONE (0x0080) ++#define MCF_EDMA_TCD1_CSR_LINKCH(x) (((x)&0x003F)<<8) ++#define MCF_EDMA_TCD1_CSR_BWC(x) (((x)&0x0003)<<14) ++ ++/* Bit definitions and macros for TCD2_SADDR */ ++#define MCF_EDMA_TCD2_SADDR_SADDR(x) (x) ++ ++/* Bit definitions and macros for TCD2_ATTR */ ++#define MCF_EDMA_TCD2_ATTR_DSIZE(x) (((x)&0x0007)) ++#define MCF_EDMA_TCD2_ATTR_DMOD(x) (((x)&0x001F)<<3) ++#define MCF_EDMA_TCD2_ATTR_SSIZE(x) (((x)&0x0007)<<8) ++#define MCF_EDMA_TCD2_ATTR_SMOD(x) (((x)&0x001F)<<11) ++ ++/* Bit definitions and macros for TCD2_SOFF */ ++#define MCF_EDMA_TCD2_SOFF_SOFF(x) (x) ++ ++/* Bit definitions and macros for TCD2_NBYTES */ ++#define MCF_EDMA_TCD2_NBYTES_NBYTES(x) (x) ++ ++/* Bit definitions and macros for TCD2_SLAST */ ++#define MCF_EDMA_TCD2_SLAST_SLAST(x) (x) ++ ++/* Bit definitions and macros for TCD2_DADDR */ ++#define MCF_EDMA_TCD2_DADDR_DADDR(x) (x) ++ ++/* Bit definitions and macros for TCD2_CITER */ ++#define MCF_EDMA_TCD2_CITER_CITER(x) (((x)&0x7FFF)) ++#define MCF_EDMA_TCD2_CITER_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD2_CITER_ELINK */ ++#define MCF_EDMA_TCD2_CITER_ELINK_CITER(x) (((x)&0x01FF)) ++#define MCF_EDMA_TCD2_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) ++#define MCF_EDMA_TCD2_CITER_ELINK_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD2_DOFF */ ++#define MCF_EDMA_TCD2_DOFF_DOFF(x) (x) ++ ++/* Bit definitions and macros for TCD2_DLAST_SGA */ ++#define MCF_EDMA_TCD2_DLAST_SGA_DLAST_SGA(x) (x) ++ ++/* Bit definitions and macros for TCD2_BITER_ELINK */ ++#define MCF_EDMA_TCD2_BITER_ELINK_BITER(x) (((x)&0x01FF)) ++#define MCF_EDMA_TCD2_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) ++#define MCF_EDMA_TCD2_BITER_ELINK_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD2_BITER */ ++#define MCF_EDMA_TCD2_BITER_BITER(x) (((x)&0x7FFF)) ++#define MCF_EDMA_TCD2_BITER_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD2_CSR */ ++#define MCF_EDMA_TCD2_CSR_START (0x0001) ++#define MCF_EDMA_TCD2_CSR_INT_MAJOR (0x0002) ++#define MCF_EDMA_TCD2_CSR_INT_HALF (0x0004) ++#define MCF_EDMA_TCD2_CSR_D_REQ (0x0008) ++#define MCF_EDMA_TCD2_CSR_E_SG (0x0010) ++#define MCF_EDMA_TCD2_CSR_E_LINK (0x0020) ++#define MCF_EDMA_TCD2_CSR_ACTIVE (0x0040) ++#define MCF_EDMA_TCD2_CSR_DONE (0x0080) ++#define MCF_EDMA_TCD2_CSR_LINKCH(x) (((x)&0x003F)<<8) ++#define MCF_EDMA_TCD2_CSR_BWC(x) (((x)&0x0003)<<14) ++ ++/* Bit definitions and macros for TCD3_SADDR */ ++#define MCF_EDMA_TCD3_SADDR_SADDR(x) (x) ++ ++/* Bit definitions and macros for TCD3_ATTR */ ++#define MCF_EDMA_TCD3_ATTR_DSIZE(x) (((x)&0x0007)) ++#define MCF_EDMA_TCD3_ATTR_DMOD(x) (((x)&0x001F)<<3) ++#define MCF_EDMA_TCD3_ATTR_SSIZE(x) (((x)&0x0007)<<8) ++#define MCF_EDMA_TCD3_ATTR_SMOD(x) (((x)&0x001F)<<11) ++ ++/* Bit definitions and macros for TCD3_SOFF */ ++#define MCF_EDMA_TCD3_SOFF_SOFF(x) (x) ++ ++/* Bit definitions and macros for TCD3_NBYTES */ ++#define MCF_EDMA_TCD3_NBYTES_NBYTES(x) (x) ++ ++/* Bit definitions and macros for TCD3_SLAST */ ++#define MCF_EDMA_TCD3_SLAST_SLAST(x) (x) ++ ++/* Bit definitions and macros for TCD3_DADDR */ ++#define MCF_EDMA_TCD3_DADDR_DADDR(x) (x) ++ ++/* Bit definitions and macros for TCD3_CITER */ ++#define MCF_EDMA_TCD3_CITER_CITER(x) (((x)&0x7FFF)) ++#define MCF_EDMA_TCD3_CITER_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD3_CITER_ELINK */ ++#define MCF_EDMA_TCD3_CITER_ELINK_CITER(x) (((x)&0x01FF)) ++#define MCF_EDMA_TCD3_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) ++#define MCF_EDMA_TCD3_CITER_ELINK_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD3_DOFF */ ++#define MCF_EDMA_TCD3_DOFF_DOFF(x) (x) ++ ++/* Bit definitions and macros for TCD3_DLAST_SGA */ ++#define MCF_EDMA_TCD3_DLAST_SGA_DLAST_SGA(x) (x) ++ ++/* Bit definitions and macros for TCD3_BITER_ELINK */ ++#define MCF_EDMA_TCD3_BITER_ELINK_BITER(x) (((x)&0x01FF)) ++#define MCF_EDMA_TCD3_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) ++#define MCF_EDMA_TCD3_BITER_ELINK_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD3_BITER */ ++#define MCF_EDMA_TCD3_BITER_BITER(x) (((x)&0x7FFF)) ++#define MCF_EDMA_TCD3_BITER_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD3_CSR */ ++#define MCF_EDMA_TCD3_CSR_START (0x0001) ++#define MCF_EDMA_TCD3_CSR_INT_MAJOR (0x0002) ++#define MCF_EDMA_TCD3_CSR_INT_HALF (0x0004) ++#define MCF_EDMA_TCD3_CSR_D_REQ (0x0008) ++#define MCF_EDMA_TCD3_CSR_E_SG (0x0010) ++#define MCF_EDMA_TCD3_CSR_E_LINK (0x0020) ++#define MCF_EDMA_TCD3_CSR_ACTIVE (0x0040) ++#define MCF_EDMA_TCD3_CSR_DONE (0x0080) ++#define MCF_EDMA_TCD3_CSR_LINKCH(x) (((x)&0x003F)<<8) ++#define MCF_EDMA_TCD3_CSR_BWC(x) (((x)&0x0003)<<14) ++ ++/* Bit definitions and macros for TCD4_SADDR */ ++#define MCF_EDMA_TCD4_SADDR_SADDR(x) (x) ++ ++/* Bit definitions and macros for TCD4_ATTR */ ++#define MCF_EDMA_TCD4_ATTR_DSIZE(x) (((x)&0x0007)) ++#define MCF_EDMA_TCD4_ATTR_DMOD(x) (((x)&0x001F)<<3) ++#define MCF_EDMA_TCD4_ATTR_SSIZE(x) (((x)&0x0007)<<8) ++#define MCF_EDMA_TCD4_ATTR_SMOD(x) (((x)&0x001F)<<11) ++ ++/* Bit definitions and macros for TCD4_SOFF */ ++#define MCF_EDMA_TCD4_SOFF_SOFF(x) (x) ++ ++/* Bit definitions and macros for TCD4_NBYTES */ ++#define MCF_EDMA_TCD4_NBYTES_NBYTES(x) (x) ++ ++/* Bit definitions and macros for TCD4_SLAST */ ++#define MCF_EDMA_TCD4_SLAST_SLAST(x) (x) ++ ++/* Bit definitions and macros for TCD4_DADDR */ ++#define MCF_EDMA_TCD4_DADDR_DADDR(x) (x) ++ ++/* Bit definitions and macros for TCD4_CITER */ ++#define MCF_EDMA_TCD4_CITER_CITER(x) (((x)&0x7FFF)) ++#define MCF_EDMA_TCD4_CITER_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD4_CITER_ELINK */ ++#define MCF_EDMA_TCD4_CITER_ELINK_CITER(x) (((x)&0x01FF)) ++#define MCF_EDMA_TCD4_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) ++#define MCF_EDMA_TCD4_CITER_ELINK_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD4_DOFF */ ++#define MCF_EDMA_TCD4_DOFF_DOFF(x) (x) ++ ++/* Bit definitions and macros for TCD4_DLAST_SGA */ ++#define MCF_EDMA_TCD4_DLAST_SGA_DLAST_SGA(x) (x) ++ ++/* Bit definitions and macros for TCD4_BITER */ ++#define MCF_EDMA_TCD4_BITER_BITER(x) (((x)&0x7FFF)) ++#define MCF_EDMA_TCD4_BITER_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD4_BITER_ELINK */ ++#define MCF_EDMA_TCD4_BITER_ELINK_BITER(x) (((x)&0x01FF)) ++#define MCF_EDMA_TCD4_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) ++#define MCF_EDMA_TCD4_BITER_ELINK_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD4_CSR */ ++#define MCF_EDMA_TCD4_CSR_START (0x0001) ++#define MCF_EDMA_TCD4_CSR_INT_MAJOR (0x0002) ++#define MCF_EDMA_TCD4_CSR_INT_HALF (0x0004) ++#define MCF_EDMA_TCD4_CSR_D_REQ (0x0008) ++#define MCF_EDMA_TCD4_CSR_E_SG (0x0010) ++#define MCF_EDMA_TCD4_CSR_E_LINK (0x0020) ++#define MCF_EDMA_TCD4_CSR_ACTIVE (0x0040) ++#define MCF_EDMA_TCD4_CSR_DONE (0x0080) ++#define MCF_EDMA_TCD4_CSR_LINKCH(x) (((x)&0x003F)<<8) ++#define MCF_EDMA_TCD4_CSR_BWC(x) (((x)&0x0003)<<14) ++ ++/* Bit definitions and macros for TCD5_SADDR */ ++#define MCF_EDMA_TCD5_SADDR_SADDR(x) (x) ++ ++/* Bit definitions and macros for TCD5_ATTR */ ++#define MCF_EDMA_TCD5_ATTR_DSIZE(x) (((x)&0x0007)) ++#define MCF_EDMA_TCD5_ATTR_DMOD(x) (((x)&0x001F)<<3) ++#define MCF_EDMA_TCD5_ATTR_SSIZE(x) (((x)&0x0007)<<8) ++#define MCF_EDMA_TCD5_ATTR_SMOD(x) (((x)&0x001F)<<11) ++ ++/* Bit definitions and macros for TCD5_SOFF */ ++#define MCF_EDMA_TCD5_SOFF_SOFF(x) (x) ++ ++/* Bit definitions and macros for TCD5_NBYTES */ ++#define MCF_EDMA_TCD5_NBYTES_NBYTES(x) (x) ++ ++/* Bit definitions and macros for TCD5_SLAST */ ++#define MCF_EDMA_TCD5_SLAST_SLAST(x) (x) ++ ++/* Bit definitions and macros for TCD5_DADDR */ ++#define MCF_EDMA_TCD5_DADDR_DADDR(x) (x) ++ ++/* Bit definitions and macros for TCD5_CITER */ ++#define MCF_EDMA_TCD5_CITER_CITER(x) (((x)&0x7FFF)) ++#define MCF_EDMA_TCD5_CITER_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD5_CITER_ELINK */ ++#define MCF_EDMA_TCD5_CITER_ELINK_CITER(x) (((x)&0x01FF)) ++#define MCF_EDMA_TCD5_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) ++#define MCF_EDMA_TCD5_CITER_ELINK_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD5_DOFF */ ++#define MCF_EDMA_TCD5_DOFF_DOFF(x) (x) ++ ++/* Bit definitions and macros for TCD5_DLAST_SGA */ ++#define MCF_EDMA_TCD5_DLAST_SGA_DLAST_SGA(x) (x) ++ ++/* Bit definitions and macros for TCD5_BITER_ELINK */ ++#define MCF_EDMA_TCD5_BITER_ELINK_BITER(x) (((x)&0x01FF)) ++#define MCF_EDMA_TCD5_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) ++#define MCF_EDMA_TCD5_BITER_ELINK_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD5_BITER */ ++#define MCF_EDMA_TCD5_BITER_BITER(x) (((x)&0x7FFF)) ++#define MCF_EDMA_TCD5_BITER_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD5_CSR */ ++#define MCF_EDMA_TCD5_CSR_START (0x0001) ++#define MCF_EDMA_TCD5_CSR_INT_MAJOR (0x0002) ++#define MCF_EDMA_TCD5_CSR_INT_HALF (0x0004) ++#define MCF_EDMA_TCD5_CSR_D_REQ (0x0008) ++#define MCF_EDMA_TCD5_CSR_E_SG (0x0010) ++#define MCF_EDMA_TCD5_CSR_E_LINK (0x0020) ++#define MCF_EDMA_TCD5_CSR_ACTIVE (0x0040) ++#define MCF_EDMA_TCD5_CSR_DONE (0x0080) ++#define MCF_EDMA_TCD5_CSR_LINKCH(x) (((x)&0x003F)<<8) ++#define MCF_EDMA_TCD5_CSR_BWC(x) (((x)&0x0003)<<14) ++ ++/* Bit definitions and macros for TCD6_SADDR */ ++#define MCF_EDMA_TCD6_SADDR_SADDR(x) (x) ++ ++/* Bit definitions and macros for TCD6_ATTR */ ++#define MCF_EDMA_TCD6_ATTR_DSIZE(x) (((x)&0x0007)) ++#define MCF_EDMA_TCD6_ATTR_DMOD(x) (((x)&0x001F)<<3) ++#define MCF_EDMA_TCD6_ATTR_SSIZE(x) (((x)&0x0007)<<8) ++#define MCF_EDMA_TCD6_ATTR_SMOD(x) (((x)&0x001F)<<11) ++ ++/* Bit definitions and macros for TCD6_SOFF */ ++#define MCF_EDMA_TCD6_SOFF_SOFF(x) (x) ++ ++/* Bit definitions and macros for TCD6_NBYTES */ ++#define MCF_EDMA_TCD6_NBYTES_NBYTES(x) (x) ++ ++/* Bit definitions and macros for TCD6_SLAST */ ++#define MCF_EDMA_TCD6_SLAST_SLAST(x) (x) ++ ++/* Bit definitions and macros for TCD6_DADDR */ ++#define MCF_EDMA_TCD6_DADDR_DADDR(x) (x) ++ ++/* Bit definitions and macros for TCD6_CITER */ ++#define MCF_EDMA_TCD6_CITER_CITER(x) (((x)&0x7FFF)) ++#define MCF_EDMA_TCD6_CITER_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD6_CITER_ELINK */ ++#define MCF_EDMA_TCD6_CITER_ELINK_CITER(x) (((x)&0x01FF)) ++#define MCF_EDMA_TCD6_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) ++#define MCF_EDMA_TCD6_CITER_ELINK_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD6_DOFF */ ++#define MCF_EDMA_TCD6_DOFF_DOFF(x) (x) ++ ++/* Bit definitions and macros for TCD6_DLAST_SGA */ ++#define MCF_EDMA_TCD6_DLAST_SGA_DLAST_SGA(x) (x) ++ ++/* Bit definitions and macros for TCD6_BITER_ELINK */ ++#define MCF_EDMA_TCD6_BITER_ELINK_BITER(x) (((x)&0x01FF)) ++#define MCF_EDMA_TCD6_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) ++#define MCF_EDMA_TCD6_BITER_ELINK_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD6_BITER */ ++#define MCF_EDMA_TCD6_BITER_BITER(x) (((x)&0x7FFF)) ++#define MCF_EDMA_TCD6_BITER_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD6_CSR */ ++#define MCF_EDMA_TCD6_CSR_START (0x0001) ++#define MCF_EDMA_TCD6_CSR_INT_MAJOR (0x0002) ++#define MCF_EDMA_TCD6_CSR_INT_HALF (0x0004) ++#define MCF_EDMA_TCD6_CSR_D_REQ (0x0008) ++#define MCF_EDMA_TCD6_CSR_E_SG (0x0010) ++#define MCF_EDMA_TCD6_CSR_E_LINK (0x0020) ++#define MCF_EDMA_TCD6_CSR_ACTIVE (0x0040) ++#define MCF_EDMA_TCD6_CSR_DONE (0x0080) ++#define MCF_EDMA_TCD6_CSR_LINKCH(x) (((x)&0x003F)<<8) ++#define MCF_EDMA_TCD6_CSR_BWC(x) (((x)&0x0003)<<14) ++ ++/* Bit definitions and macros for TCD7_SADDR */ ++#define MCF_EDMA_TCD7_SADDR_SADDR(x) (x) ++ ++/* Bit definitions and macros for TCD7_ATTR */ ++#define MCF_EDMA_TCD7_ATTR_DSIZE(x) (((x)&0x0007)) ++#define MCF_EDMA_TCD7_ATTR_DMOD(x) (((x)&0x001F)<<3) ++#define MCF_EDMA_TCD7_ATTR_SSIZE(x) (((x)&0x0007)<<8) ++#define MCF_EDMA_TCD7_ATTR_SMOD(x) (((x)&0x001F)<<11) ++ ++/* Bit definitions and macros for TCD7_SOFF */ ++#define MCF_EDMA_TCD7_SOFF_SOFF(x) (x) ++ ++/* Bit definitions and macros for TCD7_NBYTES */ ++#define MCF_EDMA_TCD7_NBYTES_NBYTES(x) (x) ++ ++/* Bit definitions and macros for TCD7_SLAST */ ++#define MCF_EDMA_TCD7_SLAST_SLAST(x) (x) ++ ++/* Bit definitions and macros for TCD7_DADDR */ ++#define MCF_EDMA_TCD7_DADDR_DADDR(x) (x) ++ ++/* Bit definitions and macros for TCD7_CITER */ ++#define MCF_EDMA_TCD7_CITER_CITER(x) (((x)&0x7FFF)) ++#define MCF_EDMA_TCD7_CITER_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD7_CITER_ELINK */ ++#define MCF_EDMA_TCD7_CITER_ELINK_CITER(x) (((x)&0x01FF)) ++#define MCF_EDMA_TCD7_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) ++#define MCF_EDMA_TCD7_CITER_ELINK_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD7_DOFF */ ++#define MCF_EDMA_TCD7_DOFF_DOFF(x) (x) ++ ++/* Bit definitions and macros for TCD7_DLAST_SGA */ ++#define MCF_EDMA_TCD7_DLAST_SGA_DLAST_SGA(x) (x) ++ ++/* Bit definitions and macros for TCD7_BITER_ELINK */ ++#define MCF_EDMA_TCD7_BITER_ELINK_BITER(x) (((x)&0x01FF)) ++#define MCF_EDMA_TCD7_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) ++#define MCF_EDMA_TCD7_BITER_ELINK_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD7_BITER */ ++#define MCF_EDMA_TCD7_BITER_BITER(x) (((x)&0x7FFF)) ++#define MCF_EDMA_TCD7_BITER_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD7_CSR */ ++#define MCF_EDMA_TCD7_CSR_START (0x0001) ++#define MCF_EDMA_TCD7_CSR_INT_MAJOR (0x0002) ++#define MCF_EDMA_TCD7_CSR_INT_HALF (0x0004) ++#define MCF_EDMA_TCD7_CSR_D_REQ (0x0008) ++#define MCF_EDMA_TCD7_CSR_E_SG (0x0010) ++#define MCF_EDMA_TCD7_CSR_E_LINK (0x0020) ++#define MCF_EDMA_TCD7_CSR_ACTIVE (0x0040) ++#define MCF_EDMA_TCD7_CSR_DONE (0x0080) ++#define MCF_EDMA_TCD7_CSR_LINKCH(x) (((x)&0x003F)<<8) ++#define MCF_EDMA_TCD7_CSR_BWC(x) (((x)&0x0003)<<14) ++ ++/* Bit definitions and macros for TCD8_SADDR */ ++#define MCF_EDMA_TCD8_SADDR_SADDR(x) (x) ++ ++/* Bit definitions and macros for TCD8_ATTR */ ++#define MCF_EDMA_TCD8_ATTR_DSIZE(x) (((x)&0x0007)) ++#define MCF_EDMA_TCD8_ATTR_DMOD(x) (((x)&0x001F)<<3) ++#define MCF_EDMA_TCD8_ATTR_SSIZE(x) (((x)&0x0007)<<8) ++#define MCF_EDMA_TCD8_ATTR_SMOD(x) (((x)&0x001F)<<11) ++ ++/* Bit definitions and macros for TCD8_SOFF */ ++#define MCF_EDMA_TCD8_SOFF_SOFF(x) (x) ++ ++/* Bit definitions and macros for TCD8_NBYTES */ ++#define MCF_EDMA_TCD8_NBYTES_NBYTES(x) (x) ++ ++/* Bit definitions and macros for TCD8_SLAST */ ++#define MCF_EDMA_TCD8_SLAST_SLAST(x) (x) ++ ++/* Bit definitions and macros for TCD8_DADDR */ ++#define MCF_EDMA_TCD8_DADDR_DADDR(x) (x) ++ ++/* Bit definitions and macros for TCD8_CITER */ ++#define MCF_EDMA_TCD8_CITER_CITER(x) (((x)&0x7FFF)) ++#define MCF_EDMA_TCD8_CITER_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD8_CITER_ELINK */ ++#define MCF_EDMA_TCD8_CITER_ELINK_CITER(x) (((x)&0x01FF)) ++#define MCF_EDMA_TCD8_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) ++#define MCF_EDMA_TCD8_CITER_ELINK_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD8_DOFF */ ++#define MCF_EDMA_TCD8_DOFF_DOFF(x) (x) ++ ++/* Bit definitions and macros for TCD8_DLAST_SGA */ ++#define MCF_EDMA_TCD8_DLAST_SGA_DLAST_SGA(x) (x) ++ ++/* Bit definitions and macros for TCD8_BITER_ELINK */ ++#define MCF_EDMA_TCD8_BITER_ELINK_BITER(x) (((x)&0x01FF)) ++#define MCF_EDMA_TCD8_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) ++#define MCF_EDMA_TCD8_BITER_ELINK_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD8_BITER */ ++#define MCF_EDMA_TCD8_BITER_BITER(x) (((x)&0x7FFF)) ++#define MCF_EDMA_TCD8_BITER_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD8_CSR */ ++#define MCF_EDMA_TCD8_CSR_START (0x0001) ++#define MCF_EDMA_TCD8_CSR_INT_MAJOR (0x0002) ++#define MCF_EDMA_TCD8_CSR_INT_HALF (0x0004) ++#define MCF_EDMA_TCD8_CSR_D_REQ (0x0008) ++#define MCF_EDMA_TCD8_CSR_E_SG (0x0010) ++#define MCF_EDMA_TCD8_CSR_E_LINK (0x0020) ++#define MCF_EDMA_TCD8_CSR_ACTIVE (0x0040) ++#define MCF_EDMA_TCD8_CSR_DONE (0x0080) ++#define MCF_EDMA_TCD8_CSR_LINKCH(x) (((x)&0x003F)<<8) ++#define MCF_EDMA_TCD8_CSR_BWC(x) (((x)&0x0003)<<14) ++ ++/* Bit definitions and macros for TCD9_SADDR */ ++#define MCF_EDMA_TCD9_SADDR_SADDR(x) (x) ++ ++/* Bit definitions and macros for TCD9_ATTR */ ++#define MCF_EDMA_TCD9_ATTR_DSIZE(x) (((x)&0x0007)) ++#define MCF_EDMA_TCD9_ATTR_DMOD(x) (((x)&0x001F)<<3) ++#define MCF_EDMA_TCD9_ATTR_SSIZE(x) (((x)&0x0007)<<8) ++#define MCF_EDMA_TCD9_ATTR_SMOD(x) (((x)&0x001F)<<11) ++ ++/* Bit definitions and macros for TCD9_SOFF */ ++#define MCF_EDMA_TCD9_SOFF_SOFF(x) (x) ++ ++/* Bit definitions and macros for TCD9_NBYTES */ ++#define MCF_EDMA_TCD9_NBYTES_NBYTES(x) (x) ++ ++/* Bit definitions and macros for TCD9_SLAST */ ++#define MCF_EDMA_TCD9_SLAST_SLAST(x) (x) ++ ++/* Bit definitions and macros for TCD9_DADDR */ ++#define MCF_EDMA_TCD9_DADDR_DADDR(x) (x) ++ ++/* Bit definitions and macros for TCD9_CITER_ELINK */ ++#define MCF_EDMA_TCD9_CITER_ELINK_CITER(x) (((x)&0x01FF)) ++#define MCF_EDMA_TCD9_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) ++#define MCF_EDMA_TCD9_CITER_ELINK_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD9_CITER */ ++#define MCF_EDMA_TCD9_CITER_CITER(x) (((x)&0x7FFF)) ++#define MCF_EDMA_TCD9_CITER_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD9_DOFF */ ++#define MCF_EDMA_TCD9_DOFF_DOFF(x) (x) ++ ++/* Bit definitions and macros for TCD9_DLAST_SGA */ ++#define MCF_EDMA_TCD9_DLAST_SGA_DLAST_SGA(x) (x) ++ ++/* Bit definitions and macros for TCD9_BITER_ELINK */ ++#define MCF_EDMA_TCD9_BITER_ELINK_BITER(x) (((x)&0x01FF)) ++#define MCF_EDMA_TCD9_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) ++#define MCF_EDMA_TCD9_BITER_ELINK_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD9_BITER */ ++#define MCF_EDMA_TCD9_BITER_BITER(x) (((x)&0x7FFF)) ++#define MCF_EDMA_TCD9_BITER_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD9_CSR */ ++#define MCF_EDMA_TCD9_CSR_START (0x0001) ++#define MCF_EDMA_TCD9_CSR_INT_MAJOR (0x0002) ++#define MCF_EDMA_TCD9_CSR_INT_HALF (0x0004) ++#define MCF_EDMA_TCD9_CSR_D_REQ (0x0008) ++#define MCF_EDMA_TCD9_CSR_E_SG (0x0010) ++#define MCF_EDMA_TCD9_CSR_E_LINK (0x0020) ++#define MCF_EDMA_TCD9_CSR_ACTIVE (0x0040) ++#define MCF_EDMA_TCD9_CSR_DONE (0x0080) ++#define MCF_EDMA_TCD9_CSR_LINKCH(x) (((x)&0x003F)<<8) ++#define MCF_EDMA_TCD9_CSR_BWC(x) (((x)&0x0003)<<14) ++ ++/* Bit definitions and macros for TCD10_SADDR */ ++#define MCF_EDMA_TCD10_SADDR_SADDR(x) (x) ++ ++/* Bit definitions and macros for TCD10_ATTR */ ++#define MCF_EDMA_TCD10_ATTR_DSIZE(x) (((x)&0x0007)) ++#define MCF_EDMA_TCD10_ATTR_DMOD(x) (((x)&0x001F)<<3) ++#define MCF_EDMA_TCD10_ATTR_SSIZE(x) (((x)&0x0007)<<8) ++#define MCF_EDMA_TCD10_ATTR_SMOD(x) (((x)&0x001F)<<11) ++ ++/* Bit definitions and macros for TCD10_SOFF */ ++#define MCF_EDMA_TCD10_SOFF_SOFF(x) (x) ++ ++/* Bit definitions and macros for TCD10_NBYTES */ ++#define MCF_EDMA_TCD10_NBYTES_NBYTES(x) (x) ++ ++/* Bit definitions and macros for TCD10_SLAST */ ++#define MCF_EDMA_TCD10_SLAST_SLAST(x) (x) ++ ++/* Bit definitions and macros for TCD10_DADDR */ ++#define MCF_EDMA_TCD10_DADDR_DADDR(x) (x) ++ ++/* Bit definitions and macros for TCD10_CITER_ELINK */ ++#define MCF_EDMA_TCD10_CITER_ELINK_CITER(x) (((x)&0x01FF)) ++#define MCF_EDMA_TCD10_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) ++#define MCF_EDMA_TCD10_CITER_ELINK_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD10_CITER */ ++#define MCF_EDMA_TCD10_CITER_CITER(x) (((x)&0x7FFF)) ++#define MCF_EDMA_TCD10_CITER_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD10_DOFF */ ++#define MCF_EDMA_TCD10_DOFF_DOFF(x) (x) ++ ++/* Bit definitions and macros for TCD10_DLAST_SGA */ ++#define MCF_EDMA_TCD10_DLAST_SGA_DLAST_SGA(x) (x) ++ ++/* Bit definitions and macros for TCD10_BITER */ ++#define MCF_EDMA_TCD10_BITER_BITER(x) (((x)&0x7FFF)) ++#define MCF_EDMA_TCD10_BITER_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD10_BITER_ELINK */ ++#define MCF_EDMA_TCD10_BITER_ELINK_BITER(x) (((x)&0x01FF)) ++#define MCF_EDMA_TCD10_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) ++#define MCF_EDMA_TCD10_BITER_ELINK_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD10_CSR */ ++#define MCF_EDMA_TCD10_CSR_START (0x0001) ++#define MCF_EDMA_TCD10_CSR_INT_MAJOR (0x0002) ++#define MCF_EDMA_TCD10_CSR_INT_HALF (0x0004) ++#define MCF_EDMA_TCD10_CSR_D_REQ (0x0008) ++#define MCF_EDMA_TCD10_CSR_E_SG (0x0010) ++#define MCF_EDMA_TCD10_CSR_E_LINK (0x0020) ++#define MCF_EDMA_TCD10_CSR_ACTIVE (0x0040) ++#define MCF_EDMA_TCD10_CSR_DONE (0x0080) ++#define MCF_EDMA_TCD10_CSR_LINKCH(x) (((x)&0x003F)<<8) ++#define MCF_EDMA_TCD10_CSR_BWC(x) (((x)&0x0003)<<14) ++ ++/* Bit definitions and macros for TCD11_SADDR */ ++#define MCF_EDMA_TCD11_SADDR_SADDR(x) (x) ++ ++/* Bit definitions and macros for TCD11_ATTR */ ++#define MCF_EDMA_TCD11_ATTR_DSIZE(x) (((x)&0x0007)) ++#define MCF_EDMA_TCD11_ATTR_DMOD(x) (((x)&0x001F)<<3) ++#define MCF_EDMA_TCD11_ATTR_SSIZE(x) (((x)&0x0007)<<8) ++#define MCF_EDMA_TCD11_ATTR_SMOD(x) (((x)&0x001F)<<11) ++ ++/* Bit definitions and macros for TCD11_SOFF */ ++#define MCF_EDMA_TCD11_SOFF_SOFF(x) (x) ++ ++/* Bit definitions and macros for TCD11_NBYTES */ ++#define MCF_EDMA_TCD11_NBYTES_NBYTES(x) (x) ++ ++/* Bit definitions and macros for TCD11_SLAST */ ++#define MCF_EDMA_TCD11_SLAST_SLAST(x) (x) ++ ++/* Bit definitions and macros for TCD11_DADDR */ ++#define MCF_EDMA_TCD11_DADDR_DADDR(x) (x) ++ ++/* Bit definitions and macros for TCD11_CITER */ ++#define MCF_EDMA_TCD11_CITER_CITER(x) (((x)&0x7FFF)) ++#define MCF_EDMA_TCD11_CITER_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD11_CITER_ELINK */ ++#define MCF_EDMA_TCD11_CITER_ELINK_CITER(x) (((x)&0x01FF)) ++#define MCF_EDMA_TCD11_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) ++#define MCF_EDMA_TCD11_CITER_ELINK_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD11_DOFF */ ++#define MCF_EDMA_TCD11_DOFF_DOFF(x) (x) ++ ++/* Bit definitions and macros for TCD11_DLAST_SGA */ ++#define MCF_EDMA_TCD11_DLAST_SGA_DLAST_SGA(x) (x) ++ ++/* Bit definitions and macros for TCD11_BITER */ ++#define MCF_EDMA_TCD11_BITER_BITER(x) (((x)&0x7FFF)) ++#define MCF_EDMA_TCD11_BITER_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD11_BITER_ELINK */ ++#define MCF_EDMA_TCD11_BITER_ELINK_BITER(x) (((x)&0x01FF)) ++#define MCF_EDMA_TCD11_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) ++#define MCF_EDMA_TCD11_BITER_ELINK_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD11_CSR */ ++#define MCF_EDMA_TCD11_CSR_START (0x0001) ++#define MCF_EDMA_TCD11_CSR_INT_MAJOR (0x0002) ++#define MCF_EDMA_TCD11_CSR_INT_HALF (0x0004) ++#define MCF_EDMA_TCD11_CSR_D_REQ (0x0008) ++#define MCF_EDMA_TCD11_CSR_E_SG (0x0010) ++#define MCF_EDMA_TCD11_CSR_E_LINK (0x0020) ++#define MCF_EDMA_TCD11_CSR_ACTIVE (0x0040) ++#define MCF_EDMA_TCD11_CSR_DONE (0x0080) ++#define MCF_EDMA_TCD11_CSR_LINKCH(x) (((x)&0x003F)<<8) ++#define MCF_EDMA_TCD11_CSR_BWC(x) (((x)&0x0003)<<14) ++ ++/* Bit definitions and macros for TCD12_SADDR */ ++#define MCF_EDMA_TCD12_SADDR_SADDR(x) (x) ++ ++/* Bit definitions and macros for TCD12_ATTR */ ++#define MCF_EDMA_TCD12_ATTR_DSIZE(x) (((x)&0x0007)) ++#define MCF_EDMA_TCD12_ATTR_DMOD(x) (((x)&0x001F)<<3) ++#define MCF_EDMA_TCD12_ATTR_SSIZE(x) (((x)&0x0007)<<8) ++#define MCF_EDMA_TCD12_ATTR_SMOD(x) (((x)&0x001F)<<11) ++ ++/* Bit definitions and macros for TCD12_SOFF */ ++#define MCF_EDMA_TCD12_SOFF_SOFF(x) (x) ++ ++/* Bit definitions and macros for TCD12_NBYTES */ ++#define MCF_EDMA_TCD12_NBYTES_NBYTES(x) (x) ++ ++/* Bit definitions and macros for TCD12_SLAST */ ++#define MCF_EDMA_TCD12_SLAST_SLAST(x) (x) ++ ++/* Bit definitions and macros for TCD12_DADDR */ ++#define MCF_EDMA_TCD12_DADDR_DADDR(x) (x) ++ ++/* Bit definitions and macros for TCD12_CITER */ ++#define MCF_EDMA_TCD12_CITER_CITER(x) (((x)&0x7FFF)) ++#define MCF_EDMA_TCD12_CITER_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD12_CITER_ELINK */ ++#define MCF_EDMA_TCD12_CITER_ELINK_CITER(x) (((x)&0x01FF)) ++#define MCF_EDMA_TCD12_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) ++#define MCF_EDMA_TCD12_CITER_ELINK_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD12_DOFF */ ++#define MCF_EDMA_TCD12_DOFF_DOFF(x) (x) ++ ++/* Bit definitions and macros for TCD12_DLAST_SGA */ ++#define MCF_EDMA_TCD12_DLAST_SGA_DLAST_SGA(x) (x) ++ ++/* Bit definitions and macros for TCD12_BITER */ ++#define MCF_EDMA_TCD12_BITER_BITER(x) (((x)&0x7FFF)) ++#define MCF_EDMA_TCD12_BITER_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD12_BITER_ELINK */ ++#define MCF_EDMA_TCD12_BITER_ELINK_BITER(x) (((x)&0x01FF)) ++#define MCF_EDMA_TCD12_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) ++#define MCF_EDMA_TCD12_BITER_ELINK_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD12_CSR */ ++#define MCF_EDMA_TCD12_CSR_START (0x0001) ++#define MCF_EDMA_TCD12_CSR_INT_MAJOR (0x0002) ++#define MCF_EDMA_TCD12_CSR_INT_HALF (0x0004) ++#define MCF_EDMA_TCD12_CSR_D_REQ (0x0008) ++#define MCF_EDMA_TCD12_CSR_E_SG (0x0010) ++#define MCF_EDMA_TCD12_CSR_E_LINK (0x0020) ++#define MCF_EDMA_TCD12_CSR_ACTIVE (0x0040) ++#define MCF_EDMA_TCD12_CSR_DONE (0x0080) ++#define MCF_EDMA_TCD12_CSR_LINKCH(x) (((x)&0x003F)<<8) ++#define MCF_EDMA_TCD12_CSR_BWC(x) (((x)&0x0003)<<14) ++ ++/* Bit definitions and macros for TCD13_SADDR */ ++#define MCF_EDMA_TCD13_SADDR_SADDR(x) (x) ++ ++/* Bit definitions and macros for TCD13_ATTR */ ++#define MCF_EDMA_TCD13_ATTR_DSIZE(x) (((x)&0x0007)) ++#define MCF_EDMA_TCD13_ATTR_DMOD(x) (((x)&0x001F)<<3) ++#define MCF_EDMA_TCD13_ATTR_SSIZE(x) (((x)&0x0007)<<8) ++#define MCF_EDMA_TCD13_ATTR_SMOD(x) (((x)&0x001F)<<11) ++ ++/* Bit definitions and macros for TCD13_SOFF */ ++#define MCF_EDMA_TCD13_SOFF_SOFF(x) (x) ++ ++/* Bit definitions and macros for TCD13_NBYTES */ ++#define MCF_EDMA_TCD13_NBYTES_NBYTES(x) (x) ++ ++/* Bit definitions and macros for TCD13_SLAST */ ++#define MCF_EDMA_TCD13_SLAST_SLAST(x) (x) ++ ++/* Bit definitions and macros for TCD13_DADDR */ ++#define MCF_EDMA_TCD13_DADDR_DADDR(x) (x) ++ ++/* Bit definitions and macros for TCD13_CITER_ELINK */ ++#define MCF_EDMA_TCD13_CITER_ELINK_CITER(x) (((x)&0x01FF)) ++#define MCF_EDMA_TCD13_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) ++#define MCF_EDMA_TCD13_CITER_ELINK_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD13_CITER */ ++#define MCF_EDMA_TCD13_CITER_CITER(x) (((x)&0x7FFF)) ++#define MCF_EDMA_TCD13_CITER_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD13_DOFF */ ++#define MCF_EDMA_TCD13_DOFF_DOFF(x) (x) ++ ++/* Bit definitions and macros for TCD13_DLAST_SGA */ ++#define MCF_EDMA_TCD13_DLAST_SGA_DLAST_SGA(x) (x) ++ ++/* Bit definitions and macros for TCD13_BITER_ELINK */ ++#define MCF_EDMA_TCD13_BITER_ELINK_BITER(x) (((x)&0x01FF)) ++#define MCF_EDMA_TCD13_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) ++#define MCF_EDMA_TCD13_BITER_ELINK_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD13_BITER */ ++#define MCF_EDMA_TCD13_BITER_BITER(x) (((x)&0x7FFF)) ++#define MCF_EDMA_TCD13_BITER_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD13_CSR */ ++#define MCF_EDMA_TCD13_CSR_START (0x0001) ++#define MCF_EDMA_TCD13_CSR_INT_MAJOR (0x0002) ++#define MCF_EDMA_TCD13_CSR_INT_HALF (0x0004) ++#define MCF_EDMA_TCD13_CSR_D_REQ (0x0008) ++#define MCF_EDMA_TCD13_CSR_E_SG (0x0010) ++#define MCF_EDMA_TCD13_CSR_E_LINK (0x0020) ++#define MCF_EDMA_TCD13_CSR_ACTIVE (0x0040) ++#define MCF_EDMA_TCD13_CSR_DONE (0x0080) ++#define MCF_EDMA_TCD13_CSR_LINKCH(x) (((x)&0x003F)<<8) ++#define MCF_EDMA_TCD13_CSR_BWC(x) (((x)&0x0003)<<14) ++ ++/* Bit definitions and macros for TCD14_SADDR */ ++#define MCF_EDMA_TCD14_SADDR_SADDR(x) (x) ++ ++/* Bit definitions and macros for TCD14_ATTR */ ++#define MCF_EDMA_TCD14_ATTR_DSIZE(x) (((x)&0x0007)) ++#define MCF_EDMA_TCD14_ATTR_DMOD(x) (((x)&0x001F)<<3) ++#define MCF_EDMA_TCD14_ATTR_SSIZE(x) (((x)&0x0007)<<8) ++#define MCF_EDMA_TCD14_ATTR_SMOD(x) (((x)&0x001F)<<11) ++ ++/* Bit definitions and macros for TCD14_SOFF */ ++#define MCF_EDMA_TCD14_SOFF_SOFF(x) (x) ++ ++/* Bit definitions and macros for TCD14_NBYTES */ ++#define MCF_EDMA_TCD14_NBYTES_NBYTES(x) (x) ++ ++/* Bit definitions and macros for TCD14_SLAST */ ++#define MCF_EDMA_TCD14_SLAST_SLAST(x) (x) ++ ++/* Bit definitions and macros for TCD14_DADDR */ ++#define MCF_EDMA_TCD14_DADDR_DADDR(x) (x) ++ ++/* Bit definitions and macros for TCD14_CITER */ ++#define MCF_EDMA_TCD14_CITER_CITER(x) (((x)&0x7FFF)) ++#define MCF_EDMA_TCD14_CITER_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD14_CITER_ELINK */ ++#define MCF_EDMA_TCD14_CITER_ELINK_CITER(x) (((x)&0x01FF)) ++#define MCF_EDMA_TCD14_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) ++#define MCF_EDMA_TCD14_CITER_ELINK_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD14_DOFF */ ++#define MCF_EDMA_TCD14_DOFF_DOFF(x) (x) ++ ++/* Bit definitions and macros for TCD14_DLAST_SGA */ ++#define MCF_EDMA_TCD14_DLAST_SGA_DLAST_SGA(x) (x) ++ ++/* Bit definitions and macros for TCD14_BITER_ELINK */ ++#define MCF_EDMA_TCD14_BITER_ELINK_BITER(x) (((x)&0x01FF)) ++#define MCF_EDMA_TCD14_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) ++#define MCF_EDMA_TCD14_BITER_ELINK_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD14_BITER */ ++#define MCF_EDMA_TCD14_BITER_BITER(x) (((x)&0x7FFF)) ++#define MCF_EDMA_TCD14_BITER_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD14_CSR */ ++#define MCF_EDMA_TCD14_CSR_START (0x0001) ++#define MCF_EDMA_TCD14_CSR_INT_MAJOR (0x0002) ++#define MCF_EDMA_TCD14_CSR_INT_HALF (0x0004) ++#define MCF_EDMA_TCD14_CSR_D_REQ (0x0008) ++#define MCF_EDMA_TCD14_CSR_E_SG (0x0010) ++#define MCF_EDMA_TCD14_CSR_E_LINK (0x0020) ++#define MCF_EDMA_TCD14_CSR_ACTIVE (0x0040) ++#define MCF_EDMA_TCD14_CSR_DONE (0x0080) ++#define MCF_EDMA_TCD14_CSR_LINKCH(x) (((x)&0x003F)<<8) ++#define MCF_EDMA_TCD14_CSR_BWC(x) (((x)&0x0003)<<14) ++ ++/* Bit definitions and macros for TCD15_SADDR */ ++#define MCF_EDMA_TCD15_SADDR_SADDR(x) (x) ++ ++/* Bit definitions and macros for TCD15_ATTR */ ++#define MCF_EDMA_TCD15_ATTR_DSIZE(x) (((x)&0x0007)) ++#define MCF_EDMA_TCD15_ATTR_DMOD(x) (((x)&0x001F)<<3) ++#define MCF_EDMA_TCD15_ATTR_SSIZE(x) (((x)&0x0007)<<8) ++#define MCF_EDMA_TCD15_ATTR_SMOD(x) (((x)&0x001F)<<11) ++ ++/* Bit definitions and macros for TCD15_SOFF */ ++#define MCF_EDMA_TCD15_SOFF_SOFF(x) (x) ++ ++/* Bit definitions and macros for TCD15_NBYTES */ ++#define MCF_EDMA_TCD15_NBYTES_NBYTES(x) (x) ++ ++/* Bit definitions and macros for TCD15_SLAST */ ++#define MCF_EDMA_TCD15_SLAST_SLAST(x) (x) ++ ++/* Bit definitions and macros for TCD15_DADDR */ ++#define MCF_EDMA_TCD15_DADDR_DADDR(x) (x) ++ ++/* Bit definitions and macros for TCD15_CITER_ELINK */ ++#define MCF_EDMA_TCD15_CITER_ELINK_CITER(x) (((x)&0x01FF)) ++#define MCF_EDMA_TCD15_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) ++#define MCF_EDMA_TCD15_CITER_ELINK_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD15_CITER */ ++#define MCF_EDMA_TCD15_CITER_CITER(x) (((x)&0x7FFF)) ++#define MCF_EDMA_TCD15_CITER_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD15_DOFF */ ++#define MCF_EDMA_TCD15_DOFF_DOFF(x) (x) ++ ++/* Bit definitions and macros for TCD15_DLAST_SGA */ ++#define MCF_EDMA_TCD15_DLAST_SGA_DLAST_SGA(x) (x) ++ ++/* Bit definitions and macros for TCD15_BITER */ ++#define MCF_EDMA_TCD15_BITER_BITER(x) (((x)&0x7FFF)) ++#define MCF_EDMA_TCD15_BITER_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD15_BITER_ELINK */ ++#define MCF_EDMA_TCD15_BITER_ELINK_BITER(x) (((x)&0x01FF)) ++#define MCF_EDMA_TCD15_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) ++#define MCF_EDMA_TCD15_BITER_ELINK_E_LINK (0x8000) ++ ++/* Bit definitions and macros for TCD15_CSR */ ++#define MCF_EDMA_TCD15_CSR_START (0x0001) ++#define MCF_EDMA_TCD15_CSR_INT_MAJOR (0x0002) ++#define MCF_EDMA_TCD15_CSR_INT_HALF (0x0004) ++#define MCF_EDMA_TCD15_CSR_D_REQ (0x0008) ++#define MCF_EDMA_TCD15_CSR_E_SG (0x0010) ++#define MCF_EDMA_TCD15_CSR_E_LINK (0x0020) ++#define MCF_EDMA_TCD15_CSR_ACTIVE (0x0040) ++#define MCF_EDMA_TCD15_CSR_DONE (0x0080) ++#define MCF_EDMA_TCD15_CSR_LINKCH(x) (((x)&0x003F)<<8) ++#define MCF_EDMA_TCD15_CSR_BWC(x) (((x)&0x0003)<<14) ++ ++#endif /* __MCF5445X_EDMA_H__ */ +--- /dev/null ++++ b/include/asm-m68k/mcf5445x_eport.h +@@ -0,0 +1,117 @@ ++/* ++ * Kurt Mahan kmahan@freescale.com ++ * ++ * Copyright Freescale Semiconductor, Inc. 2007 ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ */ ++ ++#ifndef __MCF5445X_EPORT_H__ ++#define __MCF5445X_EPORT_H__ ++ ++/********************************************************************* ++* ++* Edge Port Module (EPORT) ++* ++*********************************************************************/ ++ ++/* Register read/write macros */ ++#define MCF_EPORT_EPPAR MCF_REG16(0xFC094000) ++#define MCF_EPORT_EPDDR MCF_REG08(0xFC094002) ++#define MCF_EPORT_EPIER MCF_REG08(0xFC094003) ++#define MCF_EPORT_EPDR MCF_REG08(0xFC094004) ++#define MCF_EPORT_EPPDR MCF_REG08(0xFC094005) ++#define MCF_EPORT_EPFR MCF_REG08(0xFC094006) ++ ++/* Bit definitions and macros for EPPAR */ ++#define MCF_EPORT_EPPAR_EPPA1(x) (((x)&0x0003)<<2) ++#define MCF_EPORT_EPPAR_EPPA2(x) (((x)&0x0003)<<4) ++#define MCF_EPORT_EPPAR_EPPA3(x) (((x)&0x0003)<<6) ++#define MCF_EPORT_EPPAR_EPPA4(x) (((x)&0x0003)<<8) ++#define MCF_EPORT_EPPAR_EPPA5(x) (((x)&0x0003)<<10) ++#define MCF_EPORT_EPPAR_EPPA6(x) (((x)&0x0003)<<12) ++#define MCF_EPORT_EPPAR_EPPA7(x) (((x)&0x0003)<<14) ++#define MCF_EPORT_EPPAR_LEVEL (0) ++#define MCF_EPORT_EPPAR_RISING (1) ++#define MCF_EPORT_EPPAR_FALLING (2) ++#define MCF_EPORT_EPPAR_BOTH (3) ++#define MCF_EPORT_EPPAR_EPPA7_LEVEL (0x0000) ++#define MCF_EPORT_EPPAR_EPPA7_RISING (0x4000) ++#define MCF_EPORT_EPPAR_EPPA7_FALLING (0x8000) ++#define MCF_EPORT_EPPAR_EPPA7_BOTH (0xC000) ++#define MCF_EPORT_EPPAR_EPPA6_LEVEL (0x0000) ++#define MCF_EPORT_EPPAR_EPPA6_RISING (0x1000) ++#define MCF_EPORT_EPPAR_EPPA6_FALLING (0x2000) ++#define MCF_EPORT_EPPAR_EPPA6_BOTH (0x3000) ++#define MCF_EPORT_EPPAR_EPPA5_LEVEL (0x0000) ++#define MCF_EPORT_EPPAR_EPPA5_RISING (0x0400) ++#define MCF_EPORT_EPPAR_EPPA5_FALLING (0x0800) ++#define MCF_EPORT_EPPAR_EPPA5_BOTH (0x0C00) ++#define MCF_EPORT_EPPAR_EPPA4_LEVEL (0x0000) ++#define MCF_EPORT_EPPAR_EPPA4_RISING (0x0100) ++#define MCF_EPORT_EPPAR_EPPA4_FALLING (0x0200) ++#define MCF_EPORT_EPPAR_EPPA4_BOTH (0x0300) ++#define MCF_EPORT_EPPAR_EPPA3_LEVEL (0x0000) ++#define MCF_EPORT_EPPAR_EPPA3_RISING (0x0040) ++#define MCF_EPORT_EPPAR_EPPA3_FALLING (0x0080) ++#define MCF_EPORT_EPPAR_EPPA3_BOTH (0x00C0) ++#define MCF_EPORT_EPPAR_EPPA2_LEVEL (0x0000) ++#define MCF_EPORT_EPPAR_EPPA2_RISING (0x0010) ++#define MCF_EPORT_EPPAR_EPPA2_FALLING (0x0020) ++#define MCF_EPORT_EPPAR_EPPA2_BOTH (0x0030) ++#define MCF_EPORT_EPPAR_EPPA1_LEVEL (0x0000) ++#define MCF_EPORT_EPPAR_EPPA1_RISING (0x0004) ++#define MCF_EPORT_EPPAR_EPPA1_FALLING (0x0008) ++#define MCF_EPORT_EPPAR_EPPA1_BOTH (0x000C) ++ ++/* Bit definitions and macros for EPDDR */ ++#define MCF_EPORT_EPDDR_EPDD1 (0x02) ++#define MCF_EPORT_EPDDR_EPDD2 (0x04) ++#define MCF_EPORT_EPDDR_EPDD3 (0x08) ++#define MCF_EPORT_EPDDR_EPDD4 (0x10) ++#define MCF_EPORT_EPDDR_EPDD5 (0x20) ++#define MCF_EPORT_EPDDR_EPDD6 (0x40) ++#define MCF_EPORT_EPDDR_EPDD7 (0x80) ++ ++/* Bit definitions and macros for EPIER */ ++#define MCF_EPORT_EPIER_EPIE1 (0x02) ++#define MCF_EPORT_EPIER_EPIE2 (0x04) ++#define MCF_EPORT_EPIER_EPIE3 (0x08) ++#define MCF_EPORT_EPIER_EPIE4 (0x10) ++#define MCF_EPORT_EPIER_EPIE5 (0x20) ++#define MCF_EPORT_EPIER_EPIE6 (0x40) ++#define MCF_EPORT_EPIER_EPIE7 (0x80) ++ ++/* Bit definitions and macros for EPDR */ ++#define MCF_EPORT_EPDR_EPD1 (0x02) ++#define MCF_EPORT_EPDR_EPD2 (0x04) ++#define MCF_EPORT_EPDR_EPD3 (0x08) ++#define MCF_EPORT_EPDR_EPD4 (0x10) ++#define MCF_EPORT_EPDR_EPD5 (0x20) ++#define MCF_EPORT_EPDR_EPD6 (0x40) ++#define MCF_EPORT_EPDR_EPD7 (0x80) ++ ++/* Bit definitions and macros for EPPDR */ ++#define MCF_EPORT_EPPDR_EPPD1 (0x02) ++#define MCF_EPORT_EPPDR_EPPD2 (0x04) ++#define MCF_EPORT_EPPDR_EPPD3 (0x08) ++#define MCF_EPORT_EPPDR_EPPD4 (0x10) ++#define MCF_EPORT_EPPDR_EPPD5 (0x20) ++#define MCF_EPORT_EPPDR_EPPD6 (0x40) ++#define MCF_EPORT_EPPDR_EPPD7 (0x80) ++ ++/* Bit definitions and macros for EPFR */ ++#define MCF_EPORT_EPFR_EPF1 (0x02) ++#define MCF_EPORT_EPFR_EPF2 (0x04) ++#define MCF_EPORT_EPFR_EPF3 (0x08) ++#define MCF_EPORT_EPFR_EPF4 (0x10) ++#define MCF_EPORT_EPFR_EPF5 (0x20) ++#define MCF_EPORT_EPFR_EPF6 (0x40) ++#define MCF_EPORT_EPFR_EPF7 (0x80) ++ ++/********************************************************************/ ++ ++#endif /* __MCF5445X_EPORT_H__ */ +--- /dev/null ++++ b/include/asm-m68k/mcf5445x_fbcs.h +@@ -0,0 +1,182 @@ ++/* ++ * Matt Waddel Matt.Waddel@freescale.com ++ * ++ * Copyright Freescale Semiconductor, Inc. 2007 ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ */ ++ ++#ifndef __MCF5445X_FBCS_H__ ++#define __MCF5445X_FBCS_H__ ++ ++/********************************************************************* ++* ++* FlexBus Chip Selects (FBCS) ++* ++*********************************************************************/ ++ ++/* Register read/write macros */ ++#define MCF_FBCS_CSAR0 MCF_REG32(0xFC008000) /* Chip-select Addr Register */ ++#define MCF_FBCS_CSMR0 MCF_REG32(0xFC008004) /* Chip-select Mask Register */ ++#define MCF_FBCS_CSCR0 MCF_REG32(0xFC008008) /* Chip-select Cntl Register */ ++#define MCF_FBCS_CSAR1 MCF_REG32(0xFC00800C) /* Chip-select Addr Register */ ++#define MCF_FBCS_CSMR1 MCF_REG32(0xFC008010) /* Chip-select Mask Register */ ++#define MCF_FBCS_CSCR1 MCF_REG32(0xFC008014) /* Chip-select Cntl Register */ ++#define MCF_FBCS_CSAR2 MCF_REG32(0xFC008018) /* Chip-select Addr Register */ ++#define MCF_FBCS_CSMR2 MCF_REG32(0xFC00801C) /* Chip-select Mask Register */ ++#define MCF_FBCS_CSCR2 MCF_REG32(0xFC008020) /* Chip-select Cntl Register */ ++#define MCF_FBCS_CSAR3 MCF_REG32(0xFC008024) /* Chip-select Addr Register */ ++#define MCF_FBCS_CSMR3 MCF_REG32(0xFC008028) /* Chip-select Mask Register */ ++#define MCF_FBCS_CSCR3 MCF_REG32(0xFC00802C) /* Chip-select Cntl Register */ ++ ++/* Parameterized register read/write macros for multiple registers */ ++#define MCF_FBCS_CSAR(x) MCF_REG32(0xFC008000+((x)*0x00C)) /* Chip-select Addr Register */ ++#define MCF_FBCS_CSMR(x) MCF_REG32(0xFC008004+((x)*0x00C)) /* Chip-select Mask Register */ ++#define MCF_FBCS_CSCR(x) MCF_REG32(0xFC008008+((x)*0x00C)) /* Chip-select Cntl Register */ ++ ++/* Bit definitions and macros for CSAR group */ ++#define MCF_FBCS_CSAR_BA(x) ((x)&0xFFFF0000) ++ ++/* Bit definitions and macros for CSAR0 */ ++#define MCF_FBCS_CSAR0_BA(x) ((x)&0xFFFF0000) ++ ++/* Bit definitions and macros for CSMR group */ ++#define MCF_FBCS_CSMR_V (0x00000001) /* Valid bit */ ++#define MCF_FBCS_CSMR_WP (0x00000100) /* Write protect */ ++#define MCF_FBCS_CSMR_BAM(x) (((x)&0x0000FFFF)<<16) /* Base addr mask */ ++#define MCF_FBCS_CSMR_BAM_4G (0xFFFF0000) ++#define MCF_FBCS_CSMR_BAM_2G (0x7FFF0000) ++#define MCF_FBCS_CSMR_BAM_1G (0x3FFF0000) ++#define MCF_FBCS_CSMR_BAM_1024M (0x3FFF0000) ++#define MCF_FBCS_CSMR_BAM_512M (0x1FFF0000) ++#define MCF_FBCS_CSMR_BAM_256M (0x0FFF0000) ++#define MCF_FBCS_CSMR_BAM_128M (0x07FF0000) ++#define MCF_FBCS_CSMR_BAM_64M (0x03FF0000) ++#define MCF_FBCS_CSMR_BAM_32M (0x01FF0000) ++#define MCF_FBCS_CSMR_BAM_16M (0x00FF0000) ++#define MCF_FBCS_CSMR_BAM_8M (0x007F0000) ++#define MCF_FBCS_CSMR_BAM_4M (0x003F0000) ++#define MCF_FBCS_CSMR_BAM_2M (0x001F0000) ++#define MCF_FBCS_CSMR_BAM_1M (0x000F0000) ++#define MCF_FBCS_CSMR_BAM_1024K (0x000F0000) ++#define MCF_FBCS_CSMR_BAM_512K (0x00070000) ++#define MCF_FBCS_CSMR_BAM_256K (0x00030000) ++#define MCF_FBCS_CSMR_BAM_128K (0x00010000) ++#define MCF_FBCS_CSMR_BAM_64K (0x00000000) ++ ++/* Bit definitions and macros for CSMR0 */ ++#define MCF_FBCS_CSMR0_V (0x00000001) /* Valid bit */ ++#define MCF_FBCS_CSMR0_WP (0x00000100) /* Write protect */ ++#define MCF_FBCS_CSMR0_BAM(x) (((x)&0x0000FFFF)<<16) /* Base addr mask */ ++#define MCF_FBCS_CSMR0_BAM_4G (0xFFFF0000) ++#define MCF_FBCS_CSMR0_BAM_2G (0x7FFF0000) ++#define MCF_FBCS_CSMR0_BAM_1G (0x3FFF0000) ++#define MCF_FBCS_CSMR0_BAM_1024M (0x3FFF0000) ++#define MCF_FBCS_CSMR0_BAM_512M (0x1FFF0000) ++#define MCF_FBCS_CSMR0_BAM_256M (0x0FFF0000) ++#define MCF_FBCS_CSMR0_BAM_128M (0x07FF0000) ++#define MCF_FBCS_CSMR0_BAM_64M (0x03FF0000) ++#define MCF_FBCS_CSMR0_BAM_32M (0x01FF0000) ++#define MCF_FBCS_CSMR0_BAM_16M (0x00FF0000) ++#define MCF_FBCS_CSMR0_BAM_8M (0x007F0000) ++#define MCF_FBCS_CSMR0_BAM_4M (0x003F0000) ++#define MCF_FBCS_CSMR0_BAM_2M (0x001F0000) ++#define MCF_FBCS_CSMR0_BAM_1M (0x000F0000) ++#define MCF_FBCS_CSMR0_BAM_1024K (0x000F0000) ++#define MCF_FBCS_CSMR0_BAM_512K (0x00070000) ++#define MCF_FBCS_CSMR0_BAM_256K (0x00030000) ++#define MCF_FBCS_CSMR0_BAM_128K (0x00010000) ++#define MCF_FBCS_CSMR0_BAM_64K (0x00000000) ++ ++/* Bit definitions and macros for CSCR group */ ++#define MCF_FBCS_CSCR_BSTW (0x00000008) /* Burst-write enable */ ++#define MCF_FBCS_CSCR_BSTR (0x00000010) /* Burst-read enable */ ++#define MCF_FBCS_CSCR_BEM (0x00000020) /* Byte-enable mode */ ++#define MCF_FBCS_CSCR_PS(x) (((x)&0x00000003)<<6) /* Port size */ ++#define MCF_FBCS_CSCR_AA (0x00000100) /* Auto-acknowledge */ ++#define MCF_FBCS_CSCR_WS(x) (((x)&0x0000003F)<<10) /* Wait states */ ++#define MCF_FBCS_CSCR_WRAH(x) (((x)&0x00000003)<<16) /* Write address hold or deselect */ ++#define MCF_FBCS_CSCR_RDAH(x) (((x)&0x00000003)<<18) /* Read address hold or deselect */ ++#define MCF_FBCS_CSCR_ASET(x) (((x)&0x00000003)<<20) /* Address setup */ ++#define MCF_FBCS_CSCR_SWSEN (0x00800000) /* Secondary wait state enable */ ++#define MCF_FBCS_CSCR_SWS(x) (((x)&0x0000003F)<<26) /* Secondary wait states */ ++#define MCF_FBCS_CSCR_PS_8 (0x00000040) ++#define MCF_FBCS_CSCR_PS_16 (0x00000080) ++#define MCF_FBCS_CSCR_PS_32 (0x00000000) ++ ++/* Bit definitions and macros for CSCR0 */ ++#define MCF_FBCS_CSCR0_BSTW (0x00000008) /* Burst-write enable */ ++#define MCF_FBCS_CSCR0_BSTR (0x00000010) /* Burst-read enable */ ++#define MCF_FBCS_CSCR0_BEM (0x00000020) /* Byte-enable mode */ ++#define MCF_FBCS_CSCR0_PS(x) (((x)&0x00000003)<<6) /* Port size */ ++#define MCF_FBCS_CSCR0_AA (0x00000100) /* Auto-acknowledge */ ++#define MCF_FBCS_CSCR0_WS(x) (((x)&0x0000003F)<<10) /* Wait states */ ++#define MCF_FBCS_CSCR0_WRAH(x) (((x)&0x00000003)<<16) /* Write address hold or deselect */ ++#define MCF_FBCS_CSCR0_RDAH(x) (((x)&0x00000003)<<18) /* Read address hold or deselect */ ++#define MCF_FBCS_CSCR0_ASET(x) (((x)&0x00000003)<<20) /* Address setup */ ++#define MCF_FBCS_CSCR0_SWSEN (0x00800000) /* Secondary wait state enable */ ++#define MCF_FBCS_CSCR0_SWS(x) (((x)&0x0000003F)<<26) /* Secondary wait states */ ++#define MCF_FBCS_CSCR0_PS_8 (0x00000040) ++#define MCF_FBCS_CSCR0_PS_16 (0x00000080) ++#define MCF_FBCS_CSCR0_PS_32 (0x00000000) ++ ++/* Bit definitions and macros for CSMR1 */ ++#define MCF_FBCS_CSMR1_V (0x00000001) /* Valid bit */ ++#define MCF_FBCS_CSMR1_WP (0x00000100) /* Write protect */ ++#define MCF_FBCS_CSMR1_BAM(x) (((x)&0x0000FFFF)<<16) /* Base address mask */ ++ ++/* Bit definitions and macros for CSCR1 */ ++#define MCF_FBCS_CSCR1_BSTW (0x00000008) /* Burst-write enable */ ++#define MCF_FBCS_CSCR1_BSTR (0x00000010) /* Burst-read enable */ ++#define MCF_FBCS_CSCR1_BEM (0x00000020) /* Byte-enable mode */ ++#define MCF_FBCS_CSCR1_PS(x) (((x)&0x00000003)<<6) /* Port size */ ++#define MCF_FBCS_CSCR1_AA (0x00000100) /* Auto-acknowledge */ ++#define MCF_FBCS_CSCR1_WS(x) (((x)&0x0000003F)<<10) /* Wait states */ ++#define MCF_FBCS_CSCR1_WRAH(x) (((x)&0x00000003)<<16) /* Write address hold or deselect */ ++#define MCF_FBCS_CSCR1_RDAH(x) (((x)&0x00000003)<<18) /* Read address hold or deselect */ ++#define MCF_FBCS_CSCR1_ASET(x) (((x)&0x00000003)<<20) /* Address setup */ ++#define MCF_FBCS_CSCR1_SWSEN (0x00800000) /* Secondary wait state enable */ ++#define MCF_FBCS_CSCR1_SWS(x) (((x)&0x0000003F)<<26) /* Secondary wait states */ ++ ++/* Bit definitions and macros for CSMR2 */ ++#define MCF_FBCS_CSMR2_V (0x00000001) /* Valid bit */ ++#define MCF_FBCS_CSMR2_WP (0x00000100) /* Write protect */ ++#define MCF_FBCS_CSMR2_BAM(x) (((x)&0x0000FFFF)<<16) /* Base address mask */ ++ ++/* Bit definitions and macros for CSCR2 */ ++#define MCF_FBCS_CSCR2_BSTW (0x00000008) /* Burst-write enable */ ++#define MCF_FBCS_CSCR2_BSTR (0x00000010) /* Burst-read enable */ ++#define MCF_FBCS_CSCR2_BEM (0x00000020) /* Byte-enable mode */ ++#define MCF_FBCS_CSCR2_PS(x) (((x)&0x00000003)<<6) /* Port size */ ++#define MCF_FBCS_CSCR2_AA (0x00000100) /* Auto-acknowledge */ ++#define MCF_FBCS_CSCR2_WS(x) (((x)&0x0000003F)<<10) /* Wait states */ ++#define MCF_FBCS_CSCR2_WRAH(x) (((x)&0x00000003)<<16) /* Write address hold or deselect */ ++#define MCF_FBCS_CSCR2_RDAH(x) (((x)&0x00000003)<<18) /* Read address hold or deselect */ ++#define MCF_FBCS_CSCR2_ASET(x) (((x)&0x00000003)<<20) /* Address setup */ ++#define MCF_FBCS_CSCR2_SWSEN (0x00800000) /* Secondary wait state enable */ ++#define MCF_FBCS_CSCR2_SWS(x) (((x)&0x0000003F)<<26) /* Secondary wait states */ ++ ++/* Bit definitions and macros for CSMR3 */ ++#define MCF_FBCS_CSMR3_V (0x00000001) /* Valid bit */ ++#define MCF_FBCS_CSMR3_WP (0x00000100) /* Write protect */ ++#define MCF_FBCS_CSMR3_BAM(x) (((x)&0x0000FFFF)<<16) /* Base address mask */ ++ ++/* Bit definitions and macros for CSCR3 */ ++#define MCF_FBCS_CSCR3_BSTW (0x00000008) /* Burst-write enable */ ++#define MCF_FBCS_CSCR3_BSTR (0x00000010) /* Burst-read enable */ ++#define MCF_FBCS_CSCR3_BEM (0x00000020) /* Byte-enable mode */ ++#define MCF_FBCS_CSCR3_PS(x) (((x)&0x00000003)<<6) /* Port size */ ++#define MCF_FBCS_CSCR3_AA (0x00000100) /* Auto-acknowledge */ ++#define MCF_FBCS_CSCR3_WS(x) (((x)&0x0000003F)<<10) /* Wait states */ ++#define MCF_FBCS_CSCR3_WRAH(x) (((x)&0x00000003)<<16) /* Write address hold or deselect */ ++#define MCF_FBCS_CSCR3_RDAH(x) (((x)&0x00000003)<<18) /* Read address hold or deselect */ ++#define MCF_FBCS_CSCR3_ASET(x) (((x)&0x00000003)<<20) /* Address setup */ ++#define MCF_FBCS_CSCR3_SWSEN (0x00800000) /* Secondary wait state enable */ ++#define MCF_FBCS_CSCR3_SWS(x) (((x)&0x0000003F)<<26) /* Secondary wait states */ ++ ++/********************************************************************/ ++ ++#endif /* __MCF5445X_FBCS_H__ */ +--- /dev/null ++++ b/include/asm-m68k/mcf5445x_gpio.h +@@ -0,0 +1,1257 @@ ++/* ++ * Matt Waddel Matt.Waddel@freescale.com ++ * ++ * Copyright Freescale Semiconductor, Inc. 2007 ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ */ ++ ++#ifndef __MCF5445X_GPIO_H__ ++#define __MCF5445X_GPIO_H__ ++ ++/********************************************************************* ++* ++* General Purpose I/O Module (GPIO) ++* ++*********************************************************************/ ++ ++/* Register read/write macros */ ++#define MCF_GPIO_PODR_FEC0H MCF_REG08(0xFC0A4000) /* FEC0 High Port Output Data Register */ ++#define MCF_GPIO_PODR_FEC0L MCF_REG08(0xFC0A4001) /* FEC0 Low Port Output Data Register */ ++#define MCF_GPIO_PODR_SSI MCF_REG08(0xFC0A4002) /* SSI Port Output Data Register */ ++#define MCF_GPIO_PODR_FBCTL MCF_REG08(0xFC0A4003) /* Flexbus Control Port Output Data Register */ ++#define MCF_GPIO_PODR_BE MCF_REG08(0xFC0A4004) /* Flexbus Byte Enable Port Output Data Register */ ++#define MCF_GPIO_PODR_CS MCF_REG08(0xFC0A4005) /* Flexbus Chip-Select Port Output Data Register */ ++#define MCF_GPIO_PODR_DMA MCF_REG08(0xFC0A4006) /* DMA Port Output Data Register */ ++#define MCF_GPIO_PODR_FECI2C MCF_REG08(0xFC0A4007) /* FEC1 / I2C Port Output Data Register */ ++#define MCF_GPIO_PODR_UART MCF_REG08(0xFC0A4009) /* UART Port Output Data Register */ ++#define MCF_GPIO_PODR_DSPI MCF_REG08(0xFC0A400A) /* DSPI Port Output Data Register */ ++#define MCF_GPIO_PODR_TIMER MCF_REG08(0xFC0A400B) /* Timer Port Output Data Register */ ++#define MCF_GPIO_PODR_PCI MCF_REG08(0xFC0A400C) /* PCI Port Output Data Register */ ++#define MCF_GPIO_PODR_USB MCF_REG08(0xFC0A400D) /* USB Port Output Data Register */ ++#define MCF_GPIO_PODR_ATAH MCF_REG08(0xFC0A400E) /* ATA High Port Output Data Register */ ++#define MCF_GPIO_PODR_ATAL MCF_REG08(0xFC0A400F) /* ATA Low Port Output Data Register */ ++#define MCF_GPIO_PODR_FEC1H MCF_REG08(0xFC0A4010) /* FEC1 High Port Output Data Register */ ++#define MCF_GPIO_PODR_FEC1L MCF_REG08(0xFC0A4011) /* FEC1 Low Port Output Data Register */ ++#define MCF_GPIO_PODR_FBADH MCF_REG08(0xFC0A4014) /* Flexbus AD High Port Output Data Register */ ++#define MCF_GPIO_PODR_FBADMH MCF_REG08(0xFC0A4015) /* Flexbus AD Med-High Port Output Data Register */ ++#define MCF_GPIO_PODR_FBADML MCF_REG08(0xFC0A4016) /* Flexbus AD Med-Low Port Output Data Register */ ++#define MCF_GPIO_PODR_FBADL MCF_REG08(0xFC0A4017) /* Flexbus AD Low Port Output Data Register */ ++#define MCF_GPIO_PDDR_FEC0H MCF_REG08(0xFC0A4018) /* FEC0 High Port Data Direction Register */ ++#define MCF_GPIO_PDDR_FEC0L MCF_REG08(0xFC0A4019) /* FEC0 Low Port Data Direction Register */ ++#define MCF_GPIO_PDDR_SSI MCF_REG08(0xFC0A401A) /* SSI Port Data Direction Register */ ++#define MCF_GPIO_PDDR_FBCTL MCF_REG08(0xFC0A401B) /* Flexbus Control Port Data Direction Register */ ++#define MCF_GPIO_PDDR_BE MCF_REG08(0xFC0A401C) /* Flexbus Byte Enable Port Data Direction Register */ ++#define MCF_GPIO_PDDR_CS MCF_REG08(0xFC0A401D) /* Flexbus Chip-Select Port Data Direction Register */ ++#define MCF_GPIO_PDDR_DMA MCF_REG08(0xFC0A401E) /* DMA Port Data Direction Register */ ++#define MCF_GPIO_PDDR_FECI2C MCF_REG08(0xFC0A401F) /* FEC1 / I2C Port Data Direction Register */ ++#define MCF_GPIO_PDDR_UART MCF_REG08(0xFC0A4021) /* UART Port Data Direction Register */ ++#define MCF_GPIO_PDDR_DSPI MCF_REG08(0xFC0A4022) /* DSPI Port Data Direction Register */ ++#define MCF_GPIO_PDDR_TIMER MCF_REG08(0xFC0A4023) /* Timer Port Data Direction Register */ ++#define MCF_GPIO_PDDR_PCI MCF_REG08(0xFC0A4024) /* PCI Port Data Direction Register */ ++#define MCF_GPIO_PDDR_USB MCF_REG08(0xFC0A4025) /* USB Port Data Direction Register */ ++#define MCF_GPIO_PDDR_ATAH MCF_REG08(0xFC0A4026) /* ATA High Port Data Direction Register */ ++#define MCF_GPIO_PDDR_ATAL MCF_REG08(0xFC0A4027) /* ATA Low Port Data Direction Register */ ++#define MCF_GPIO_PDDR_FEC1H MCF_REG08(0xFC0A4028) /* FEC1 High Port Data Direction Register */ ++#define MCF_GPIO_PDDR_FEC1L MCF_REG08(0xFC0A4029) /* FEC1 Low Port Data Direction Register */ ++#define MCF_GPIO_PDDR_FBADH MCF_REG08(0xFC0A402C) /* Flexbus AD High Port Data Direction Register */ ++#define MCF_GPIO_PDDR_FBADMH MCF_REG08(0xFC0A402D) /* Flexbus AD Med-High Port Data Direction Register */ ++#define MCF_GPIO_PDDR_FBADML MCF_REG08(0xFC0A402E) /* Flexbus AD Med-Low Port Data Direction Register */ ++#define MCF_GPIO_PDDR_FBADL MCF_REG08(0xFC0A402F) /* Flexbus AD Low Port Data Direction Register */ ++#define MCF_GPIO_PPDSDR_FEC0H MCF_REG08(0xFC0A4030) /* FEC0 High Port Pin Data/Set Data Register */ ++#define MCF_GPIO_PPDSDR_FEC0L MCF_REG08(0xFC0A4031) /* FEC0 Low Port Clear Output Data Register */ ++#define MCF_GPIO_PPDSDR_SSI MCF_REG08(0xFC0A4032) /* SSI Port Pin Data/Set Data Register */ ++#define MCF_GPIO_PPDSDR_FBCTL MCF_REG08(0xFC0A4033) /* Flexbus Control Port Pin Data/Set Data Register */ ++#define MCF_GPIO_PPDSDR_BE MCF_REG08(0xFC0A4034) /* Flexbus Byte Enable Port Pin Data/Set Data Register */ ++#define MCF_GPIO_PPDSDR_CS MCF_REG08(0xFC0A4035) /* Flexbus Chip-Select Port Pin Data/Set Data Register */ ++#define MCF_GPIO_PPDSDR_DMA MCF_REG08(0xFC0A4036) /* DMA Port Pin Data/Set Data Register */ ++#define MCF_GPIO_PPDSDR_FECI2C MCF_REG08(0xFC0A4037) /* FEC1 / I2C Port Pin Data/Set Data Register */ ++#define MCF_GPIO_PPDSDR_UART MCF_REG08(0xFC0A4039) /* UART Port Pin Data/Set Data Register */ ++#define MCF_GPIO_PPDSDR_DSPI MCF_REG08(0xFC0A403A) /* DSPI Port Pin Data/Set Data Register */ ++#define MCF_GPIO_PPDSDR_TIMER MCF_REG08(0xFC0A403B) /* FTimer Port Pin Data/Set Data Register */ ++#define MCF_GPIO_PPDSDR_PCI MCF_REG08(0xFC0A403C) /* PCI Port Pin Data/Set Data Register */ ++#define MCF_GPIO_PPDSDR_USB MCF_REG08(0xFC0A403D) /* USB Port Pin Data/Set Data Register */ ++#define MCF_GPIO_PPDSDR_ATAH MCF_REG08(0xFC0A403E) /* ATA High Port Pin Data/Set Data Register */ ++#define MCF_GPIO_PPDSDR_ATAL MCF_REG08(0xFC0A403F) /* ATA Low Port Pin Data/Set Data Register */ ++#define MCF_GPIO_PPDSDR_FEC1H MCF_REG08(0xFC0A4040) /* FEC1 High Port Pin Data/Set Data Register */ ++#define MCF_GPIO_PPDSDR_FEC1L MCF_REG08(0xFC0A4041) /* FEC1 Low Port Pin Data/Set Data Register */ ++#define MCF_GPIO_PPDSDR_FBADH MCF_REG08(0xFC0A4044) /* Flexbus AD High Port Pin Data/Set Data Register */ ++#define MCF_GPIO_PPDSDR_FBADMH MCF_REG08(0xFC0A4045) /* Flexbus AD Med-High Port Pin Data/Set Data Register */ ++#define MCF_GPIO_PPDSDR_FBADML MCF_REG08(0xFC0A4046) /* Flexbus AD Med-Low Port Pin Data/Set Data Register */ ++#define MCF_GPIO_PPDSDR_FBADL MCF_REG08(0xFC0A4047) /* Flexbus AD Low Port Pin Data/Set Data Register */ ++#define MCF_GPIO_PCLRR_FEC0H MCF_REG08(0xFC0A4048) /* FEC0 High Port Clear Output Data Register */ ++#define MCF_GPIO_PCLRR_FEC0L MCF_REG08(0xFC0A4049) /* FEC0 Low Port Pin Data/Set Data Register */ ++#define MCF_GPIO_PCLRR_SSI MCF_REG08(0xFC0A404A) /* SSI Port Clear Output Data Register */ ++#define MCF_GPIO_PCLRR_FBCTL MCF_REG08(0xFC0A404B) /* Flexbus Control Port Clear Output Data Register */ ++#define MCF_GPIO_PCLRR_BE MCF_REG08(0xFC0A404C) /* Flexbus Byte Enable Port Clear Output Data Register */ ++#define MCF_GPIO_PCLRR_CS MCF_REG08(0xFC0A404D) /* Flexbus Chip-Select Port Clear Output Data Register */ ++#define MCF_GPIO_PCLRR_DMA MCF_REG08(0xFC0A404E) /* DMA Port Clear Output Data Register */ ++#define MCF_GPIO_PCLRR_FECI2C MCF_REG08(0xFC0A404F) /* FEC1 / I2C Port Clear Output Data Register */ ++#define MCF_GPIO_PCLRR_UART MCF_REG08(0xFC0A4051) /* UART Port Clear Output Data Register */ ++#define MCF_GPIO_PCLRR_DSPI MCF_REG08(0xFC0A4052) /* DSPI Port Clear Output Data Register */ ++#define MCF_GPIO_PCLRR_TIMER MCF_REG08(0xFC0A4053) /* Timer Port Clear Output Data Register */ ++#define MCF_GPIO_PCLRR_PCI MCF_REG08(0xFC0A4054) /* PCI Port Clear Output Data Register */ ++#define MCF_GPIO_PCLRR_USB MCF_REG08(0xFC0A4055) /* USB Port Clear Output Data Register */ ++#define MCF_GPIO_PCLRR_ATAH MCF_REG08(0xFC0A4056) /* ATA High Port Clear Output Data Register */ ++#define MCF_GPIO_PCLRR_ATAL MCF_REG08(0xFC0A4057) /* ATA Low Port Clear Output Data Register */ ++#define MCF_GPIO_PCLRR_FEC1H MCF_REG08(0xFC0A4058) /* FEC1 High Port Clear Output Data Register */ ++#define MCF_GPIO_PCLRR_FEC1L MCF_REG08(0xFC0A4059) /* FEC1 Low Port Clear Output Data Register */ ++#define MCF_GPIO_PCLRR_FBADH MCF_REG08(0xFC0A405C) /* Flexbus AD High Port Clear Output Data Register */ ++#define MCF_GPIO_PCLRR_FBADMH MCF_REG08(0xFC0A405D) /* Flexbus AD Med-High Port Clear Output Data Register */ ++#define MCF_GPIO_PCLRR_FBADML MCF_REG08(0xFC0A405E) /* Flexbus AD Med-Low Port Clear Output Data Register */ ++#define MCF_GPIO_PCLRR_FBADL MCF_REG08(0xFC0A405F) /* Flexbus AD Low Port Clear Output Data Register */ ++#define MCF_GPIO_PAR_FEC MCF_REG08(0xFC0A4060) /* FEC Pin Assignment Register */ ++#define MCF_GPIO_PAR_DMA MCF_REG08(0xFC0A4061) /* DMA Pin Assignment Register */ ++#define MCF_GPIO_PAR_FBCTL MCF_REG08(0xFC0A4062) /* Flexbus Control Pin Assignment Register */ ++#define MCF_GPIO_PAR_DSPI MCF_REG08(0xFC0A4063) /* DSPI Pin Assignment Register */ ++#define MCF_GPIO_PAR_BE MCF_REG08(0xFC0A4064) /* Flexbus Byte-Enable Pin Assignment Register */ ++#define MCF_GPIO_PAR_CS MCF_REG08(0xFC0A4065) /* Flexbus Chip-Select Pin Assignment Register */ ++#define MCF_GPIO_PAR_TIMER MCF_REG08(0xFC0A4066) /* Time Pin Assignment Register */ ++#define MCF_GPIO_PAR_USB MCF_REG08(0xFC0A4067) /* USB Pin Assignment Register */ ++#define MCF_GPIO_PAR_UART MCF_REG08(0xFC0A4069) /* UART Pin Assignment Register */ ++#define MCF_GPIO_PAR_FECI2C MCF_REG16(0xFC0A406A) /* FEC / I2C Pin Assignment Register */ ++#define MCF_GPIO_PAR_SSI MCF_REG16(0xFC0A406C) /* SSI Pin Assignment Register */ ++#define MCF_GPIO_PAR_ATA MCF_REG16(0xFC0A406E) /* ATA Pin Assignment Register */ ++#define MCF_GPIO_PAR_IRQ MCF_REG08(0xFC0A4070) /* IRQ Pin Assignment Register */ ++#define MCF_GPIO_PAR_PCI MCF_REG16(0xFC0A4072) /* PCI Pin Assignment Register */ ++#define MCF_GPIO_MSCR_SDRAM MCF_REG08(0xFC0A4074) /* SDRAM Mode Select Control Register */ ++#define MCF_GPIO_MSCR_PCI MCF_REG08(0xFC0A4075) /* PCI Mode Select Control Register */ ++#define MCF_GPIO_DSCR_I2C MCF_REG08(0xFC0A4078) /* I2C Drive Strength Control Register */ ++#define MCF_GPIO_DSCR_FLEXBUS MCF_REG08(0xFC0A4079) /* FLEXBUS Drive Strength Control Register */ ++#define MCF_GPIO_DSCR_FEC MCF_REG08(0xFC0A407A) /* FEC Drive Strength Control Register */ ++#define MCF_GPIO_DSCR_UART MCF_REG08(0xFC0A407B) /* UART Drive Strength Control Register */ ++#define MCF_GPIO_DSCR_DSPI MCF_REG08(0xFC0A407C) /* DSPI Drive Strength Control Register */ ++#define MCF_GPIO_DSCR_TIMER MCF_REG08(0xFC0A407D) /* TIMER Drive Strength Control Register */ ++#define MCF_GPIO_DSCR_SSI MCF_REG08(0xFC0A407E) /* SSI Drive Strength Control Register */ ++#define MCF_GPIO_DSCR_DMA MCF_REG08(0xFC0A407F) /* DMA Drive Strength Control Register */ ++#define MCF_GPIO_DSCR_DEBUG MCF_REG08(0xFC0A4080) /* DEBUG Drive Strength Control Register */ ++#define MCF_GPIO_DSCR_RESET MCF_REG08(0xFC0A4081) /* RESET Drive Strength Control Register */ ++#define MCF_GPIO_DSCR_IRQ MCF_REG08(0xFC0A4082) /* IRQ Drive Strength Control Register */ ++#define MCF_GPIO_DSCR_USB MCF_REG08(0xFC0A4083) /* USB Drive Strength Control Register */ ++#define MCF_GPIO_DSCR_ATA MCF_REG08(0xFC0A4084) /* ATA Drive Strength Control Register */ ++ ++/* Bit definitions and macros for PODR_FEC0H */ ++#define MCF_GPIO_PODR_FEC0H_PODR0 (0x01) /* FEC0_CRS / ULPI_DATA6 */ ++#define MCF_GPIO_PODR_FEC0H_PODR1 (0x02) /* FEC0_RXD0 / FEC0_RMII_RXD0 */ ++#define MCF_GPIO_PODR_FEC0H_PODR2 (0x04) /* FEC0_RXDV/FEC0_RMII_CRS_DV */ ++#define MCF_GPIO_PODR_FEC0H_PODR3 (0x08) /* FEC0_RXCLK / ULPI_DATA1 */ ++#define MCF_GPIO_PODR_FEC0H_PODR4 (0x10) /* FEC0_COL / ULPI_DATA7 */ ++#define MCF_GPIO_PODR_FEC0H_PODR5 (0x20) /* FEC0_TXD0 / FEC0_RMII_TXD0 */ ++#define MCF_GPIO_PODR_FEC0H_PODR6 (0x40) /* FEC0_TXEN / FEC0_RMII_TXEN */ ++#define MCF_GPIO_PODR_FEC0H_PODR7 (0x80) /* FEC0_TXCLK / FEC0_RMII_REF_CLK */ ++ ++/* Bit definitions and macros for PODR_FEC0L */ ++#define MCF_GPIO_PODR_FEC0L_PODR0 (0x01) /* FEC0_RXER / FEC0_RMII_RXER */ ++#define MCF_GPIO_PODR_FEC0L_PODR1 (0x02) /* FEC0_RXD1 / FEC0_RMII_RXD1 */ ++#define MCF_GPIO_PODR_FEC0L_PODR2 (0x04) /* FEC0_RXD2 / ULPI_DATA4 */ ++#define MCF_GPIO_PODR_FEC0L_PODR3 (0x08) /* FEC0_RXD3 / ULPI_DATA5 */ ++#define MCF_GPIO_PODR_FEC0L_PODR4 (0x10) /* FEC0_TXER / ULPI_DATA0 */ ++#define MCF_GPIO_PODR_FEC0L_PODR5 (0x20) /* FEC0_TXD1 / FEC0_RMII_TXD1 */ ++#define MCF_GPIO_PODR_FEC0L_PODR6 (0x40) /* FEC0_TXD2 / ULPI_DATA2 */ ++#define MCF_GPIO_PODR_FEC0L_PODR7 (0x80) /* FEC0_TXD3 / ULPI_DATA3 */ ++ ++/* Bit definitions and macros for PODR_SSI */ ++#define MCF_GPIO_PODR_SSI_PODR0 (0x01) /* SSI_TXD / U1TXD */ ++#define MCF_GPIO_PODR_SSI_PODR1 (0x02) /* SSI_RXD / U1RXD */ ++#define MCF_GPIO_PODR_SSI_PODR2 (0x04) /* SSI_FS / U1RTS */ ++#define MCF_GPIO_PODR_SSI_PODR3 (0x08) /* SSI_BCLK / U1CTS */ ++#define MCF_GPIO_PODR_SSI_PODR4 (0x10) /* SSI_MCLK */ ++ ++/* Bit definitions and macros for PODR_FBCTL */ ++#define MCF_GPIO_PODR_FBCTL_PODR0 (0x01) /* FB_TS / FB_ALE / FB_TBST */ ++#define MCF_GPIO_PODR_FBCTL_PODR1 (0x02) /* FB_RW */ ++#define MCF_GPIO_PODR_FBCTL_PODR2 (0x04) /* FB_TA */ ++#define MCF_GPIO_PODR_FBCTL_PODR3 (0x08) /* FB_OE */ ++ ++/* Bit definitions and macros for PODR_BE */ ++#define MCF_GPIO_PODR_BE_PODR0 (0x01) /* FB_BE/BWE0 / FB_SIZ0 */ ++#define MCF_GPIO_PODR_BE_PODR1 (0x02) /* FB_BE/BWE1 / FB_SIZ1 */ ++#define MCF_GPIO_PODR_BE_PODR2 (0x04) /* FB_BE/BWE2 / FB_SIZ2 */ ++#define MCF_GPIO_PODR_BE_PODR3 (0x08) /* FB_BE/BWE3 / FB_SIZ3 */ ++ ++/* Bit definitions and macros for PODR_CS */ ++#define MCF_GPIO_PODR_CS_PODR1 (0x02) /* FB_CS1 */ ++#define MCF_GPIO_PODR_CS_PODR2 (0x04) /* FB_CS2 */ ++#define MCF_GPIO_PODR_CS_PODR3 (0x08) /* FB_CS3 */ ++ ++/* Bit definitions and macros for PODR_DMA */ ++#define MCF_GPIO_PODR_DMA_PODR0 (0x01) /* DREQ0 */ ++#define MCF_GPIO_PODR_DMA_PODR1 (0x02) /* DACK0 / DSPI_PCS3 */ ++#define MCF_GPIO_PODR_DMA_PODR2 (0x04) /* DREQ1 / USB_CLKIN */ ++#define MCF_GPIO_PODR_DMA_PODR3 (0x08) /* DACK1 / ULPI_DIR */ ++ ++/* Bit definitions and macros for PODR_FECI2C */ ++#define MCF_GPIO_PODR_FECI2C_PODR0 (0x01) /* I2C_SDA / U2RXD */ ++#define MCF_GPIO_PODR_FECI2C_PODR1 (0x02) /* I2C_SCL / U2TXD */ ++#define MCF_GPIO_PODR_FECI2C_PODR2 (0x04) /* FEC0_MDIO */ ++#define MCF_GPIO_PODR_FECI2C_PODR3 (0x08) /* FEC0_MDC */ ++#define MCF_GPIO_PODR_FECI2C_PODR4 (0x10) /* FEC1_MDIO / ATA_DIOW */ ++#define MCF_GPIO_PODR_FECI2C_PODR5 (0x20) /* FEC1_MDC / ATA_DIOR */ ++ ++/* Bit definitions and macros for PODR_UART */ ++#define MCF_GPIO_PODR_UART_PODR0 (0x01) /* U1TXD */ ++#define MCF_GPIO_PODR_UART_PODR1 (0x02) /* U1RXD */ ++#define MCF_GPIO_PODR_UART_PODR2 (0x04) /* U1RTS */ ++#define MCF_GPIO_PODR_UART_PODR3 (0x08) /* U0CTS */ ++#define MCF_GPIO_PODR_UART_PODR4 (0x10) /* U1TXD */ ++#define MCF_GPIO_PODR_UART_PODR5 (0x20) /* U1RXD */ ++#define MCF_GPIO_PODR_UART_PODR6 (0x40) /* U1RTS */ ++#define MCF_GPIO_PODR_UART_PODR7 (0x80) /* U1CTS */ ++ ++/* Bit definitions and macros for PODR_DSPI */ ++#define MCF_GPIO_PODR_DSPI_PODR0 (0x01) /* DSPI_SOUT / SBF_DO */ ++#define MCF_GPIO_PODR_DSPI_PODR1 (0x02) /* DSPI_SIN / SBF_DI */ ++#define MCF_GPIO_PODR_DSPI_PODR2 (0x04) /* DSPI_SCK / SBF_CK */ ++#define MCF_GPIO_PODR_DSPI_PODR3 (0x08) /* DSPI_PCS0/SS */ ++#define MCF_GPIO_PODR_DSPI_PODR4 (0x10) /* DSPI_PCS1 / SBF_CS */ ++#define MCF_GPIO_PODR_DSPI_PODR5 (0x20) /* DSPI_PCS2 */ ++#define MCF_GPIO_PODR_DSPI_PODR6 (0x40) /* DSPI_PCS5/SS */ ++ ++/* Bit definitions and macros for PODR_TIMER */ ++#define MCF_GPIO_PODR_TIMER_PODR0 (0x01) /* T0IN / T0OUT / U2RTS */ ++#define MCF_GPIO_PODR_TIMER_PODR1 (0x02) /* T1IN / T1OUT / U2CTS */ ++#define MCF_GPIO_PODR_TIMER_PODR2 (0x04) /* T2IN / T2OUT / U2TXD */ ++#define MCF_GPIO_PODR_TIMER_PODR3 (0x08) /* T3IN / T3OUT / U2RXD */ ++ ++/* Bit definitions and macros for PODR_PCI */ ++#define MCF_GPIO_PODR_PCI_PODR0 (0x01) /* PCI_REQ0/PCI_EXTGNT */ ++#define MCF_GPIO_PODR_PCI_PODR1 (0x02) /* PCI_REQ1 */ ++#define MCF_GPIO_PODR_PCI_PODR2 (0x04) /* PCI_REQ2 */ ++#define MCF_GPIO_PODR_PCI_PODR3 (0x08) /* PCI_REQ3 / ATA_INTR */ ++#define MCF_GPIO_PODR_PCI_PODR4 (0x10) /* PCI_GNT0/PCI_EXTREQ */ ++#define MCF_GPIO_PODR_PCI_PODR5 (0x20) /* PCI_GNT1 / */ ++#define MCF_GPIO_PODR_PCI_PODR6 (0x40) /* PCI_GNT2 / */ ++#define MCF_GPIO_PODR_PCI_PODR7 (0x80) /* PCI_GNT3 / ATA_DMACK */ ++ ++/* Bit definitions and macros for PODR_USB */ ++#define MCF_GPIO_PODR_USB_PODR0 (0x01) /* USB_VBUS_OC / ULPI_STP */ ++#define MCF_GPIO_PODR_USB_PODR1 (0x02) /* USB_VBUS_EN / USB_PULLUP / ULPI_NXT */ ++ ++/* Bit definitions and macros for PODR_ATAH */ ++#define MCF_GPIO_PODR_ATAH_PODR0 (0x01) /* ATA_DA0 */ ++#define MCF_GPIO_PODR_ATAH_PODR1 (0x02) /* ATA_DA1 */ ++#define MCF_GPIO_PODR_ATAH_PODR2 (0x04) /* ATA_DA2 */ ++#define MCF_GPIO_PODR_ATAH_PODR3 (0x08) /* ATA_CS0 */ ++#define MCF_GPIO_PODR_ATAH_PODR4 (0x10) /* ATA_CS1 */ ++#define MCF_GPIO_PODR_ATAH_PODR5 (0x20) /* ATA_BUFFER_EN */ ++ ++/* Bit definitions and macros for PODR_ATAL */ ++#define MCF_GPIO_PODR_ATAL_PODR0 (0x01) /* ATA_IORDY */ ++#define MCF_GPIO_PODR_ATAL_PODR1 (0x02) /* ATA_DMARQ */ ++#define MCF_GPIO_PODR_ATAL_PODR2 (0x04) /* ATA_RESET */ ++ ++/* Bit definitions and macros for PODR_FEC1H */ ++#define MCF_GPIO_PODR_FEC1H_PODR0 (0x01) /* FEC1_CRS / ATA_DATA6 */ ++#define MCF_GPIO_PODR_FEC1H_PODR1 (0x02) /* FEC1_RXD0 / FEC1_RMII_RXD0 / ATA_DATA13 */ ++#define MCF_GPIO_PODR_FEC1H_PODR2 (0x04) /* FEC1_RXDV / FEC1_RMII_CRS_DV / ATA_DATA15 */ ++#define MCF_GPIO_PODR_FEC1H_PODR3 (0x08) /* FEC1_RXCLK / ATA_DATA5 */ ++#define MCF_GPIO_PODR_FEC1H_PODR4 (0x10) /* FEC1_COL / ATA_DATA7 */ ++#define MCF_GPIO_PODR_FEC1H_PODR5 (0x20) /* FEC1_TXD0 / FEC1_RMII_TXD0 / ATA_DATA9 */ ++#define MCF_GPIO_PODR_FEC1H_PODR6 (0x40) /* FEC1_TXEN / FEC1_RMII_TXEN / ATA_DATA8 */ ++#define MCF_GPIO_PODR_FEC1H_PODR7 (0x80) /* FEC1_TXCLK / FEC1_RMII_REF_CLK / ATA_DATA11 */ ++ ++/* Bit definitions and macros for PODR_FEC1L */ ++#define MCF_GPIO_PODR_FEC1L_PODR0 (0x01) /* FEC1_RXER / FEC1_RMII_RXER / ATA_DATA12 */ ++#define MCF_GPIO_PODR_FEC1L_PODR1 (0x02) /* FEC1_RXD1 / FEC1_RMII_RXD1 / ATA_DATA14 */ ++#define MCF_GPIO_PODR_FEC1L_PODR2 (0x04) /* FEC1_RXD2 / ATA_DATA3 */ ++#define MCF_GPIO_PODR_FEC1L_PODR3 (0x08) /* FEC1_RXD3 / ATA_DATA4 */ ++#define MCF_GPIO_PODR_FEC1L_PODR4 (0x10) /* FEC1_TXER / ATA_DATA0 */ ++#define MCF_GPIO_PODR_FEC1L_PODR5 (0x20) /* FEC1_TXD1 / FEC1_RMII_TXD1 / ATA_DATA10 */ ++#define MCF_GPIO_PODR_FEC1L_PODR6 (0x40) /* FEC1_TXD2 / ATA_DATA1 */ ++#define MCF_GPIO_PODR_FEC1L_PODR7 (0x80) /* FEC1_TXD3 / ATA_DATA2 */ ++ ++/* Bit definitions and macros for PODR_FBADH */ ++#define MCF_GPIO_PODR_FBADH_PODR0 (0x01) /* FB_AD24 */ ++#define MCF_GPIO_PODR_FBADH_PODR1 (0x02) /* FB_AD25 */ ++#define MCF_GPIO_PODR_FBADH_PODR2 (0x04) /* FB_AD26 */ ++#define MCF_GPIO_PODR_FBADH_PODR3 (0x08) /* FB_AD27 */ ++#define MCF_GPIO_PODR_FBADH_PODR4 (0x10) /* FB_AD28 */ ++#define MCF_GPIO_PODR_FBADH_PODR5 (0x20) /* FB_AD29 */ ++#define MCF_GPIO_PODR_FBADH_PODR6 (0x40) /* FB_AD30 */ ++#define MCF_GPIO_PODR_FBADH_PODR7 (0x80) /* FB_AD31 */ ++ ++/* Bit definitions and macros for PODR_FBADMH */ ++#define MCF_GPIO_PODR_FBADMH_PODR0 (0x01) /* FB_AD16 */ ++#define MCF_GPIO_PODR_FBADMH_PODR1 (0x02) /* FB_AD17 */ ++#define MCF_GPIO_PODR_FBADMH_PODR2 (0x04) /* FB_AD18 */ ++#define MCF_GPIO_PODR_FBADMH_PODR3 (0x08) /* FB_AD19 */ ++#define MCF_GPIO_PODR_FBADMH_PODR4 (0x10) /* FB_AD20 */ ++#define MCF_GPIO_PODR_FBADMH_PODR5 (0x20) /* FB_AD21 */ ++#define MCF_GPIO_PODR_FBADMH_PODR6 (0x40) /* FB_AD22 */ ++#define MCF_GPIO_PODR_FBADMH_PODR7 (0x80) /* FB_AD23 */ ++ ++/* Bit definitions and macros for PODR_FBADML */ ++#define MCF_GPIO_PODR_FBADML_PODR0 (0x01) /* FB_AD8 */ ++#define MCF_GPIO_PODR_FBADML_PODR1 (0x02) /* FB_AD9 */ ++#define MCF_GPIO_PODR_FBADML_PODR2 (0x04) /* FB_AD10 */ ++#define MCF_GPIO_PODR_FBADML_PODR3 (0x08) /* FB_AD11 */ ++#define MCF_GPIO_PODR_FBADML_PODR4 (0x10) /* FB_AD12 */ ++#define MCF_GPIO_PODR_FBADML_PODR5 (0x20) /* FB_AD13 */ ++#define MCF_GPIO_PODR_FBADML_PODR6 (0x40) /* FB_AD14 */ ++#define MCF_GPIO_PODR_FBADML_PODR7 (0x80) /* FB_AD15 */ ++ ++/* Bit definitions and macros for PODR_FBADL */ ++#define MCF_GPIO_PODR_FBADL_PODR0 (0x01) /* FB_AD0 */ ++#define MCF_GPIO_PODR_FBADL_PODR1 (0x02) /* FB_AD1 */ ++#define MCF_GPIO_PODR_FBADL_PODR2 (0x04) /* FB_AD2 */ ++#define MCF_GPIO_PODR_FBADL_PODR3 (0x08) /* FB_AD3 */ ++#define MCF_GPIO_PODR_FBADL_PODR4 (0x10) /* FB_AD4 */ ++#define MCF_GPIO_PODR_FBADL_PODR5 (0x20) /* FB_AD5 */ ++#define MCF_GPIO_PODR_FBADL_PODR6 (0x40) /* FB_AD6 */ ++#define MCF_GPIO_PODR_FBADL_PODR7 (0x80) /* FB_AD7 */ ++ ++/* Bit definitions and macros for PDDR_FEC0H */ ++#define MCF_GPIO_PDDR_FEC0H_PDDR0 (0x01) /* FEC0_CRS / ULPI_DATA6 */ ++#define MCF_GPIO_PDDR_FEC0H_PDDR1 (0x02) /* FEC0_RXD0 / FEC0_RMII_RXD0 */ ++#define MCF_GPIO_PDDR_FEC0H_PDDR2 (0x04) /* FEC0_RXDV/FEC0_RMII_CRS_DV */ ++#define MCF_GPIO_PDDR_FEC0H_PDDR3 (0x08) /* FEC0_RXCLK / ULPI_DATA1 */ ++#define MCF_GPIO_PDDR_FEC0H_PDDR4 (0x10) /* FEC0_COL / ULPI_DATA7 */ ++#define MCF_GPIO_PDDR_FEC0H_PDDR5 (0x20) /* FEC0_TXD0 / FEC0_RMII_TXD0 */ ++#define MCF_GPIO_PDDR_FEC0H_PDDR6 (0x40) /* FEC0_TXEN / FEC0_RMII_TXEN */ ++#define MCF_GPIO_PDDR_FEC0H_PDDR7 (0x80) /* FEC0_TXCLK / FEC0_RMII_REF_CLK */ ++ ++/* Bit definitions and macros for PDDR_FEC0L */ ++#define MCF_GPIO_PDDR_FEC0L_PDDR0 (0x01) /* FEC0_RXER / FEC0_RMII_RXER */ ++#define MCF_GPIO_PDDR_FEC0L_PDDR1 (0x02) /* FEC0_RXD1 / FEC0_RMII_RXD1 */ ++#define MCF_GPIO_PDDR_FEC0L_PDDR2 (0x04) /* FEC0_RXD2 / ULPI_DATA4 */ ++#define MCF_GPIO_PDDR_FEC0L_PDDR3 (0x08) /* FEC0_RXD3 / ULPI_DATA5 */ ++#define MCF_GPIO_PDDR_FEC0L_PDDR4 (0x10) /* FEC0_TXER / ULPI_DATA0 */ ++#define MCF_GPIO_PDDR_FEC0L_PDDR5 (0x20) /* FEC0_TXD1 / FEC0_RMII_TXD1 */ ++#define MCF_GPIO_PDDR_FEC0L_PDDR6 (0x40) /* FEC0_TXD2 / ULPI_DATA2 */ ++#define MCF_GPIO_PDDR_FEC0L_PDDR7 (0x80) /* FEC0_TXD3 / ULPI_DATA3 */ ++ ++/* Bit definitions and macros for PDDR_SSI */ ++#define MCF_GPIO_PDDR_SSI_PDDR0 (0x01) /* SSI_TXD / U1TXD */ ++#define MCF_GPIO_PDDR_SSI_PDDR1 (0x02) /* SSI_RXD / U1RXD */ ++#define MCF_GPIO_PDDR_SSI_PDDR2 (0x04) /* SSI_FS / U1RTS */ ++#define MCF_GPIO_PDDR_SSI_PDDR3 (0x08) /* SSI_BCLK / U1CTS */ ++#define MCF_GPIO_PDDR_SSI_PDDR4 (0x10) /* SSI_MCLK */ ++ ++/* Bit definitions and macros for PDDR_FBCTL */ ++#define MCF_GPIO_PDDR_FBCTL_PDDR0 (0x01) /* FB_TS / FB_ALE / FB_TBST */ ++#define MCF_GPIO_PDDR_FBCTL_PDDR1 (0x02) /* FB_RW */ ++#define MCF_GPIO_PDDR_FBCTL_PDDR2 (0x04) /* FB_TA */ ++#define MCF_GPIO_PDDR_FBCTL_PDDR3 (0x08) /* FB_OE */ ++ ++/* Bit definitions and macros for PDDR_BE */ ++#define MCF_GPIO_PDDR_BE_PDDR0 (0x01) /* FB_BE/BWE0 / FB_SIZ0 */ ++#define MCF_GPIO_PDDR_BE_PDDR1 (0x02) /* FB_BE/BWE1 / FB_SIZ1 */ ++#define MCF_GPIO_PDDR_BE_PDDR2 (0x04) /* FB_BE/BWE2 / FB_SIZ2 */ ++#define MCF_GPIO_PDDR_BE_PDDR3 (0x08) /* FB_BE/BWE3 / FB_SIZ3 */ ++ ++/* Bit definitions and macros for PDDR_CS */ ++#define MCF_GPIO_PDDR_CS_PDDR1 (0x02) /* FB_CS1 */ ++#define MCF_GPIO_PDDR_CS_PDDR2 (0x04) /* FB_CS2 */ ++#define MCF_GPIO_PDDR_CS_PDDR3 (0x08) /* FB_CS3 */ ++ ++/* Bit definitions and macros for PDDR_DMA */ ++#define MCF_GPIO_PDDR_DMA_PDDR0 (0x01) /* DREQ0 */ ++#define MCF_GPIO_PDDR_DMA_PDDR1 (0x02) /* DACK0 / DSPI_PCS3 */ ++#define MCF_GPIO_PDDR_DMA_PDDR2 (0x04) /* DREQ1 / USB_CLKIN */ ++#define MCF_GPIO_PDDR_DMA_PDDR3 (0x08) /* DACK1 / ULPI_DIR */ ++ ++/* Bit definitions and macros for PDDR_FECI2C */ ++#define MCF_GPIO_PDDR_FECI2C_PDDR0 (0x01) /* I2C_SDA / U2RXD */ ++#define MCF_GPIO_PDDR_FECI2C_PDDR1 (0x02) /* I2C_SCL / U2TXD */ ++#define MCF_GPIO_PDDR_FECI2C_PDDR2 (0x04) /* FEC0_MDIO */ ++#define MCF_GPIO_PDDR_FECI2C_PDDR3 (0x08) /* FEC0_MDC */ ++#define MCF_GPIO_PDDR_FECI2C_PDDR4 (0x10) /* FEC1_MDIO / ATA_DIOW */ ++#define MCF_GPIO_PDDR_FECI2C_PDDR5 (0x20) /* FEC1_MDC / ATA_DIOR */ ++ ++/* Bit definitions and macros for PDDR_UART */ ++#define MCF_GPIO_PDDR_UART_PDDR0 (0x01) /* U1TXD */ ++#define MCF_GPIO_PDDR_UART_PDDR1 (0x02) /* U1RXD */ ++#define MCF_GPIO_PDDR_UART_PDDR2 (0x04) /* U1RTS */ ++#define MCF_GPIO_PDDR_UART_PDDR3 (0x08) /* U0CTS */ ++#define MCF_GPIO_PDDR_UART_PDDR4 (0x10) /* U1TXD */ ++#define MCF_GPIO_PDDR_UART_PDDR5 (0x20) /* U1RXD */ ++#define MCF_GPIO_PDDR_UART_PDDR6 (0x40) /* U1RTS */ ++#define MCF_GPIO_PDDR_UART_PDDR7 (0x80) /* U1CTS */ ++ ++/* Bit definitions and macros for PDDR_DSPI */ ++#define MCF_GPIO_PDDR_DSPI_PDDR0 (0x01) /* DSPI_SOUT / SBF_DO */ ++#define MCF_GPIO_PDDR_DSPI_PDDR1 (0x02) /* DSPI_SIN / SBF_DI */ ++#define MCF_GPIO_PDDR_DSPI_PDDR2 (0x04) /* DSPI_SCK / SBF_CK */ ++#define MCF_GPIO_PDDR_DSPI_PDDR3 (0x08) /* DSPI_PCS0/SS */ ++#define MCF_GPIO_PDDR_DSPI_PDDR4 (0x10) /* DSPI_PCS1 / SBF_CS */ ++#define MCF_GPIO_PDDR_DSPI_PDDR5 (0x20) /* DSPI_PCS2 */ ++#define MCF_GPIO_PDDR_DSPI_PDDR6 (0x40) /* DSPI_PCS5/SS */ ++ ++/* Bit definitions and macros for PDDR_TIMER */ ++#define MCF_GPIO_PDDR_TIMER_PDDR0 (0x01) /* T0IN / T0OUT / U2RTS */ ++#define MCF_GPIO_PDDR_TIMER_PDDR1 (0x02) /* T1IN / T1OUT / U2CTS */ ++#define MCF_GPIO_PDDR_TIMER_PDDR2 (0x04) /* T2IN / T2OUT / U2TXD */ ++#define MCF_GPIO_PDDR_TIMER_PDDR3 (0x08) /* T3IN / T3OUT / U2RXD */ ++ ++/* Bit definitions and macros for PDDR_PCI */ ++#define MCF_GPIO_PDDR_PCI_PDDR0 (0x01) /* PCI_REQ0/PCI_EXTGNT */ ++#define MCF_GPIO_PDDR_PCI_PDDR1 (0x02) /* PCI_REQ1 */ ++#define MCF_GPIO_PDDR_PCI_PDDR2 (0x04) /* PCI_REQ2 */ ++#define MCF_GPIO_PDDR_PCI_PDDR3 (0x08) /* PCI_REQ3 / ATA_INTR */ ++#define MCF_GPIO_PDDR_PCI_PDDR4 (0x10) /* PCI_GNT0/PCI_EXTREQ */ ++#define MCF_GPIO_PDDR_PCI_PDDR5 (0x20) /* PCI_GNT1 / */ ++#define MCF_GPIO_PDDR_PCI_PDDR6 (0x40) /* PCI_GNT2 / */ ++#define MCF_GPIO_PDDR_PCI_PDDR7 (0x80) /* PCI_GNT3 / ATA_DMACK */ ++ ++/* Bit definitions and macros for PDDR_USB */ ++#define MCF_GPIO_PDDR_USB_PDDR0 (0x01) /* USB_VBUS_OC / ULPI_STP */ ++#define MCF_GPIO_PDDR_USB_PDDR1 (0x02) /* USB_VBUS_EN / USB_PULLUP / ULPI_NXT */ ++ ++/* Bit definitions and macros for PDDR_ATAH */ ++#define MCF_GPIO_PDDR_ATAH_PDDR0 (0x01) /* ATA_DA0 */ ++#define MCF_GPIO_PDDR_ATAH_PDDR1 (0x02) /* ATA_DA1 */ ++#define MCF_GPIO_PDDR_ATAH_PDDR2 (0x04) /* ATA_DA2 */ ++#define MCF_GPIO_PDDR_ATAH_PDDR3 (0x08) /* ATA_CS0 */ ++#define MCF_GPIO_PDDR_ATAH_PDDR4 (0x10) /* ATA_CS1 */ ++#define MCF_GPIO_PDDR_ATAH_PDDR5 (0x20) /* ATA_BUFFER_EN */ ++ ++/* Bit definitions and macros for PDDR_ATAL */ ++#define MCF_GPIO_PDDR_ATAL_PDDR0 (0x01) /* ATA_IORDY */ ++#define MCF_GPIO_PDDR_ATAL_PDDR1 (0x02) /* ATA_DMARQ */ ++#define MCF_GPIO_PDDR_ATAL_PDDR2 (0x04) /* ATA_RESET */ ++ ++/* Bit definitions and macros for PDDR_FEC1H */ ++#define MCF_GPIO_PDDR_FEC1H_PDDR0 (0x01) /* FEC1_CRS / ATA_DATA6 */ ++#define MCF_GPIO_PDDR_FEC1H_PDDR1 (0x02) /* FEC1_RXD0 / FEC1_RMII_RXD0 / ATA_DATA13 */ ++#define MCF_GPIO_PDDR_FEC1H_PDDR2 (0x04) /* FEC1_RXDV / FEC1_RMII_CRS_DV / ATA_DATA15 */ ++#define MCF_GPIO_PDDR_FEC1H_PDDR3 (0x08) /* FEC1_RXCLK / ATA_DATA5 */ ++#define MCF_GPIO_PDDR_FEC1H_PDDR4 (0x10) /* FEC1_COL / ATA_DATA7 */ ++#define MCF_GPIO_PDDR_FEC1H_PDDR5 (0x20) /* FEC1_TXD0 / FEC1_RMII_TXD0 / ATA_DATA9 */ ++#define MCF_GPIO_PDDR_FEC1H_PDDR6 (0x40) /* FEC1_TXEN / FEC1_RMII_TXEN / ATA_DATA8 */ ++#define MCF_GPIO_PDDR_FEC1H_PDDR7 (0x80) /* FEC1_TXCLK / FEC1_RMII_REF_CLK / ATA_DATA11 */ ++ ++/* Bit definitions and macros for PDDR_FEC1L */ ++#define MCF_GPIO_PDDR_FEC1L_PDDR0 (0x01) /* FEC1_RXER / FEC1_RMII_RXER / ATA_DATA12 */ ++#define MCF_GPIO_PDDR_FEC1L_PDDR1 (0x02) /* FEC1_RXD1 / FEC1_RMII_RXD1 / ATA_DATA14 */ ++#define MCF_GPIO_PDDR_FEC1L_PDDR2 (0x04) /* FEC1_RXD2 / ATA_DATA3 */ ++#define MCF_GPIO_PDDR_FEC1L_PDDR3 (0x08) /* FEC1_RXD3 / ATA_DATA4 */ ++#define MCF_GPIO_PDDR_FEC1L_PDDR4 (0x10) /* FEC1_TXER / ATA_DATA0 */ ++#define MCF_GPIO_PDDR_FEC1L_PDDR5 (0x20) /* FEC1_TXD1 / FEC1_RMII_TXD1 / ATA_DATA10 */ ++#define MCF_GPIO_PDDR_FEC1L_PDDR6 (0x40) /* FEC1_TXD2 / ATA_DATA1 */ ++#define MCF_GPIO_PDDR_FEC1L_PDDR7 (0x80) /* FEC1_TXD3 / ATA_DATA2 */ ++ ++/* Bit definitions and macros for PDDR_FBADH */ ++#define MCF_GPIO_PDDR_FBADH_PDDR0 (0x01) /* FB_AD24 */ ++#define MCF_GPIO_PDDR_FBADH_PDDR1 (0x02) /* FB_AD25 */ ++#define MCF_GPIO_PDDR_FBADH_PDDR2 (0x04) /* FB_AD26 */ ++#define MCF_GPIO_PDDR_FBADH_PDDR3 (0x08) /* FB_AD27 */ ++#define MCF_GPIO_PDDR_FBADH_PDDR4 (0x10) /* FB_AD28 */ ++#define MCF_GPIO_PDDR_FBADH_PDDR5 (0x20) /* FB_AD29 */ ++#define MCF_GPIO_PDDR_FBADH_PDDR6 (0x40) /* FB_AD30 */ ++#define MCF_GPIO_PDDR_FBADH_PDDR7 (0x80) /* FB_AD31 */ ++ ++/* Bit definitions and macros for PDDR_FBADMH */ ++#define MCF_GPIO_PDDR_FBADMH_PDDR0 (0x01) /* FB_AD16 */ ++#define MCF_GPIO_PDDR_FBADMH_PDDR1 (0x02) /* FB_AD17 */ ++#define MCF_GPIO_PDDR_FBADMH_PDDR2 (0x04) /* FB_AD18 */ ++#define MCF_GPIO_PDDR_FBADMH_PDDR3 (0x08) /* FB_AD19 */ ++#define MCF_GPIO_PDDR_FBADMH_PDDR4 (0x10) /* FB_AD20 */ ++#define MCF_GPIO_PDDR_FBADMH_PDDR5 (0x20) /* FB_AD21 */ ++#define MCF_GPIO_PDDR_FBADMH_PDDR6 (0x40) /* FB_AD22 */ ++#define MCF_GPIO_PDDR_FBADMH_PDDR7 (0x80) /* FB_AD23 */ ++ ++/* Bit definitions and macros for PDDR_FBADML */ ++#define MCF_GPIO_PDDR_FBADML_PDDR0 (0x01) /* FB_AD8 */ ++#define MCF_GPIO_PDDR_FBADML_PDDR1 (0x02) /* FB_AD9 */ ++#define MCF_GPIO_PDDR_FBADML_PDDR2 (0x04) /* FB_AD10 */ ++#define MCF_GPIO_PDDR_FBADML_PDDR3 (0x08) /* FB_AD11 */ ++#define MCF_GPIO_PDDR_FBADML_PDDR4 (0x10) /* FB_AD12 */ ++#define MCF_GPIO_PDDR_FBADML_PDDR5 (0x20) /* FB_AD13 */ ++#define MCF_GPIO_PDDR_FBADML_PDDR6 (0x40) /* FB_AD14 */ ++#define MCF_GPIO_PDDR_FBADML_PDDR7 (0x80) /* FB_AD15 */ ++ ++/* Bit definitions and macros for PDDR_FBADL */ ++#define MCF_GPIO_PDDR_FBADL_PDDR0 (0x01) /* FB_AD0 */ ++#define MCF_GPIO_PDDR_FBADL_PDDR1 (0x02) /* FB_AD1 */ ++#define MCF_GPIO_PDDR_FBADL_PDDR2 (0x04) /* FB_AD2 */ ++#define MCF_GPIO_PDDR_FBADL_PDDR3 (0x08) /* FB_AD3 */ ++#define MCF_GPIO_PDDR_FBADL_PDDR4 (0x10) /* FB_AD4 */ ++#define MCF_GPIO_PDDR_FBADL_PDDR5 (0x20) /* FB_AD5 */ ++#define MCF_GPIO_PDDR_FBADL_PDDR6 (0x40) /* FB_AD6 */ ++#define MCF_GPIO_PDDR_FBADL_PDDR7 (0x80) /* FB_AD7 */ ++ ++/* Bit definitions and macros for PPDSDR_FEC0H */ ++#define MCF_GPIO_PPDSDR_FEC0H_PPDR0 (0x01) /* FEC0_CRS / ULPI_DATA6 */ ++#define MCF_GPIO_PPDSDR_FEC0H_PPDR1 (0x02) /* FEC0_RXD0 / FEC0_RMII_RXD0 */ ++#define MCF_GPIO_PPDSDR_FEC0H_PPDR2 (0x04) /* FEC0_RXDV / FEC0_RMII_CRS_DV */ ++#define MCF_GPIO_PPDSDR_FEC0H_PPDR3 (0x08) /* FEC0_RXCLK / ULPI_DATA1 */ ++#define MCF_GPIO_PPDSDR_FEC0H_PPDR4 (0x10) /* FEC0_COL / ULPI_DATA7 */ ++#define MCF_GPIO_PPDSDR_FEC0H_PPDR5 (0x20) /* FEC0_TXD0 / FEC0_RMII_TXD0 */ ++#define MCF_GPIO_PPDSDR_FEC0H_PPDR6 (0x40) /* FEC0_TXEN / FEC0_RMII_TXEN */ ++#define MCF_GPIO_PPDSDR_FEC0H_PPDR7 (0x80) /* FEC0_TXCLK / FEC0_RMII_REF_CLK */ ++ ++/* Bit definitions and macros for PPDSDR_FEC0L */ ++#define MCF_GPIO_PPDSDR_FEC0L_PCLRR0 (0x01) /* FEC0_RXER / FEC0_RMII_RXER */ ++#define MCF_GPIO_PPDSDR_FEC0L_PCLRR1 (0x02) /* FEC0_RXD1 / FEC0_RMII_RXD1 */ ++#define MCF_GPIO_PPDSDR_FEC0L_PCLRR2 (0x04) /* FEC0_RXD2 / ULPI_DATA4 */ ++#define MCF_GPIO_PPDSDR_FEC0L_PCLRR3 (0x08) /* FEC0_RXD3 / ULPI_DATA5 */ ++#define MCF_GPIO_PPDSDR_FEC0L_PCLRR4 (0x10) /* FEC0_TXER / ULPI_DATA0 */ ++#define MCF_GPIO_PPDSDR_FEC0L_PCLRR5 (0x20) /* FEC0_TXD1 / FEC0_RMII_TXD1 */ ++#define MCF_GPIO_PPDSDR_FEC0L_PCLRR6 (0x40) /* FEC0_TXD2 / ULPI_DATA2 */ ++#define MCF_GPIO_PPDSDR_FEC0L_PCLRR7 (0x80) /* FEC0_TXD3 / ULPI_DATA3 */ ++ ++/* Bit definitions and macros for PPDSDR_SSI */ ++#define MCF_GPIO_PPDSDR_SSI_PPDR0 (0x01) /* SSI_TXD / U1TXD */ ++#define MCF_GPIO_PPDSDR_SSI_PPDR1 (0x02) /* SSI_RXD / U1RXD */ ++#define MCF_GPIO_PPDSDR_SSI_PPDR2 (0x04) /* SSI_FS / U1RTS */ ++#define MCF_GPIO_PPDSDR_SSI_PPDR3 (0x08) /* SSI_BCLK / U1CTS */ ++#define MCF_GPIO_PPDSDR_SSI_PPDR4 (0x10) /* SSI_MCLK */ ++ ++/* Bit definitions and macros for PPDSDR_FBCTL */ ++#define MCF_GPIO_PPDSDR_FBCTL_PPDR0 (0x01) /* FB_TS / FB_ALE / FB_TBST */ ++#define MCF_GPIO_PPDSDR_FBCTL_PPDR1 (0x02) /* FB_RW */ ++#define MCF_GPIO_PPDSDR_FBCTL_PPDR2 (0x04) /* FB_TA */ ++#define MCF_GPIO_PPDSDR_FBCTL_PPDR3 (0x08) /* FB_OE */ ++ ++/* Bit definitions and macros for PPDSDR_BE */ ++#define MCF_GPIO_PPDSDR_BE_PPDR0 (0x01) /* FB_BE/BWE0 / FB_SIZ0 */ ++#define MCF_GPIO_PPDSDR_BE_PPDR1 (0x02) /* FB_BE/BWE1 / FB_SIZ1 */ ++#define MCF_GPIO_PPDSDR_BE_PPDR2 (0x04) /* FB_BE/BWE2 / FB_SIZ2 */ ++#define MCF_GPIO_PPDSDR_BE_PPDR3 (0x08) /* FB_BE/BWE3 / FB_SIZ3 */ ++ ++/* Bit definitions and macros for PPDSDR_CS */ ++#define MCF_GPIO_PPDSDR_CS_PPDR1 (0x02) /* FB_CS1 */ ++#define MCF_GPIO_PPDSDR_CS_PPDR2 (0x04) /* FB_CS2 */ ++#define MCF_GPIO_PPDSDR_CS_PPDR3 (0x08) /* FB_CS3 */ ++ ++/* Bit definitions and macros for PPDSDR_DMA */ ++#define MCF_GPIO_PPDSDR_DMA_PPDR0 (0x01) /* DREQ0 */ ++#define MCF_GPIO_PPDSDR_DMA_PPDR1 (0x02) /* DACK0 / DSPI_PCS3 */ ++#define MCF_GPIO_PPDSDR_DMA_PPDR2 (0x04) /* DREQ1 / USB_CLKIN */ ++#define MCF_GPIO_PPDSDR_DMA_PPDR3 (0x08) /* DACK1 / ULPI_DIR */ ++ ++/* Bit definitions and macros for PPDSDR_FECI2C */ ++#define MCF_GPIO_PPDSDR_FECI2C_PPDR0 (0x01) /* I2C_SDA / U2RXD */ ++#define MCF_GPIO_PPDSDR_FECI2C_PPDR1 (0x02) /* I2C_SCL / U2TXD */ ++#define MCF_GPIO_PPDSDR_FECI2C_PPDR2 (0x04) /* FEC0_MDIO */ ++#define MCF_GPIO_PPDSDR_FECI2C_PPDR3 (0x08) /* FEC0_MDC */ ++#define MCF_GPIO_PPDSDR_FECI2C_PPDR4 (0x10) /* FEC1_MDIO / ATA_DIOW */ ++#define MCF_GPIO_PPDSDR_FECI2C_PPDR5 (0x20) /* FEC1_MDC / ATA_DIOR */ ++ ++/* Bit definitions and macros for PPDSDR_UART */ ++#define MCF_GPIO_PPDSDR_UART_PPDR0 (0x01) /* U1TXD */ ++#define MCF_GPIO_PPDSDR_UART_PPDR1 (0x02) /* U1RXD */ ++#define MCF_GPIO_PPDSDR_UART_PPDR2 (0x04) /* U1RTS */ ++#define MCF_GPIO_PPDSDR_UART_PPDR3 (0x08) /* U0CTS */ ++#define MCF_GPIO_PPDSDR_UART_PPDR4 (0x10) /* U1TXD */ ++#define MCF_GPIO_PPDSDR_UART_PPDR5 (0x20) /* U1RXD */ ++#define MCF_GPIO_PPDSDR_UART_PPDR6 (0x40) /* U1RTS */ ++#define MCF_GPIO_PPDSDR_UART_PPDR7 (0x80) /* U1CTS */ ++ ++/* Bit definitions and macros for PPDSDR_DSPI */ ++#define MCF_GPIO_PPDSDR_DSPI_PPDR0 (0x01) /* DSPI_SOUT / SBF_DO */ ++#define MCF_GPIO_PPDSDR_DSPI_PPDR1 (0x02) /* DSPI_SIN / SBF_DI */ ++#define MCF_GPIO_PPDSDR_DSPI_PPDR2 (0x04) /* DSPI_SCK / SBF_CK */ ++#define MCF_GPIO_PPDSDR_DSPI_PPDR3 (0x08) /* DSPI_PCS0/SS */ ++#define MCF_GPIO_PPDSDR_DSPI_PPDR4 (0x10) /* DSPI_PCS1 / SBF_CS */ ++#define MCF_GPIO_PPDSDR_DSPI_PPDR5 (0x20) /* DSPI_PCS2 */ ++#define MCF_GPIO_PPDSDR_DSPI_PPDR6 (0x40) /* DSPI_PCS5/SS */ ++ ++/* Bit definitions and macros for PPDSDR_TIMER */ ++#define MCF_GPIO_PPDSDR_TIMER_PPDR0 (0x01) /* T0IN / T0OUT / U2RTS */ ++#define MCF_GPIO_PPDSDR_TIMER_PPDR1 (0x02) /* T1IN / T1OUT / U2CTS */ ++#define MCF_GPIO_PPDSDR_TIMER_PPDR2 (0x04) /* T2IN / T2OUT / U2TXD */ ++#define MCF_GPIO_PPDSDR_TIMER_PPDR3 (0x08) /* T3IN / T3OUT / U2RXD */ ++ ++/* Bit definitions and macros for PPDSDR_PCI */ ++#define MCF_GPIO_PPDSDR_PCI_PPDR0 (0x01) /* PCI_REQ0/PCI_EXTGNT */ ++#define MCF_GPIO_PPDSDR_PCI_PPDR1 (0x02) /* PCI_REQ1 */ ++#define MCF_GPIO_PPDSDR_PCI_PPDR2 (0x04) /* PCI_REQ2 */ ++#define MCF_GPIO_PPDSDR_PCI_PPDR3 (0x08) /* PCI_REQ3 / ATA_INTR */ ++#define MCF_GPIO_PPDSDR_PCI_PPDR4 (0x10) /* PCI_GNT0/PCI_EXTREQ */ ++#define MCF_GPIO_PPDSDR_PCI_PPDR5 (0x20) /* PCI_GNT1 / */ ++#define MCF_GPIO_PPDSDR_PCI_PPDR6 (0x40) /* PCI_GNT2 / */ ++#define MCF_GPIO_PPDSDR_PCI_PPDR7 (0x80) /* PCI_GNT3 / ATA_DMACK */ ++ ++/* Bit definitions and macros for PPDSDR_USB */ ++#define MCF_GPIO_PPDSDR_USB_PPDR0 (0x01) /* USB_VBUS_OC / ULPI_STP */ ++#define MCF_GPIO_PPDSDR_USB_PPDR1 (0x02) /* USB_VBUS_EN / USB_PULLUP / ULPI_NXT */ ++ ++/* Bit definitions and macros for PPDSDR_ATAH */ ++#define MCF_GPIO_PPDSDR_ATAH_PPDR0 (0x01) /* ATA_DA0 */ ++#define MCF_GPIO_PPDSDR_ATAH_PPDR1 (0x02) /* ATA_DA1 */ ++#define MCF_GPIO_PPDSDR_ATAH_PPDR2 (0x04) /* ATA_DA2 */ ++#define MCF_GPIO_PPDSDR_ATAH_PPDR3 (0x08) /* ATA_CS0 */ ++#define MCF_GPIO_PPDSDR_ATAH_PPDR4 (0x10) /* ATA_CS1 */ ++#define MCF_GPIO_PPDSDR_ATAH_PPDR5 (0x20) /* ATA_BUFFER_EN */ ++ ++/* Bit definitions and macros for PPDSDR_ATAL */ ++#define MCF_GPIO_PPDSDR_ATAL_PPDR0 (0x01) /* ATA_IORDY */ ++#define MCF_GPIO_PPDSDR_ATAL_PPDR1 (0x02) /* ATA_DMARQ */ ++#define MCF_GPIO_PPDSDR_ATAL_PPDR2 (0x04) /* ATA_RESET */ ++ ++/* Bit definitions and macros for PPDSDR_FEC1H */ ++#define MCF_GPIO_PPDSDR_FEC1H_PPDR0 (0x01) /* FEC1_CRS / ATA_DATA6 */ ++#define MCF_GPIO_PPDSDR_FEC1H_PPDR1 (0x02) /* FEC1_RXD0 / FEC1_RMII_RXD0 / ATA_DATA13 */ ++#define MCF_GPIO_PPDSDR_FEC1H_PPDR2 (0x04) /* FEC1_RXDV / FEC1_RMII_CRS_DV / ATA_DATA15 */ ++#define MCF_GPIO_PPDSDR_FEC1H_PPDR3 (0x08) /* FEC1_RXCLK / ATA_DATA5 */ ++#define MCF_GPIO_PPDSDR_FEC1H_PPDR4 (0x10) /* FEC1_COL / ATA_DATA7 */ ++#define MCF_GPIO_PPDSDR_FEC1H_PPDR5 (0x20) /* FEC1_TXD0 / FEC1_RMII_TXD0 / ATA_DATA9 */ ++#define MCF_GPIO_PPDSDR_FEC1H_PPDR6 (0x40) /* FEC1_TXEN / FEC1_RMII_TXEN / ATA_DATA8 */ ++#define MCF_GPIO_PPDSDR_FEC1H_PPDR7 (0x80) /* FEC1_TXCLK / FEC1_RMII_REF_CLK / ATA_DATA11 */ ++ ++/* Bit definitions and macros for PPDSDR_FEC1L */ ++#define MCF_GPIO_PPDSDR_FEC1L_PPDR0 (0x01) /* FEC1_RXER / FEC1_RMII_RXER / ATA_DATA12 */ ++#define MCF_GPIO_PPDSDR_FEC1L_PPDR1 (0x02) /* FEC1_RXD1 / FEC1_RMII_RXD1 / ATA_DATA14 */ ++#define MCF_GPIO_PPDSDR_FEC1L_PPDR2 (0x04) /* FEC1_RXD2 / ATA_DATA3 */ ++#define MCF_GPIO_PPDSDR_FEC1L_PPDR3 (0x08) /* FEC1_RXD3 / ATA_DATA4 */ ++#define MCF_GPIO_PPDSDR_FEC1L_PPDR4 (0x10) /* FEC1_TXER / ATA_DATA0 */ ++#define MCF_GPIO_PPDSDR_FEC1L_PPDR5 (0x20) /* FEC1_TXD1 / FEC1_RMII_TXD1 / ATA_DATA10 */ ++#define MCF_GPIO_PPDSDR_FEC1L_PPDR6 (0x40) /* FEC1_TXD2 / ATA_DATA1 */ ++#define MCF_GPIO_PPDSDR_FEC1L_PPDR7 (0x80) /* FEC1_TXD3 / ATA_DATA2 */ ++ ++/* Bit definitions and macros for PPDSDR_FBADH */ ++#define MCF_GPIO_PPDSDR_FBADH_PPDR0 (0x01) /* FB_AD24 */ ++#define MCF_GPIO_PPDSDR_FBADH_PPDR1 (0x02) /* FB_AD25 */ ++#define MCF_GPIO_PPDSDR_FBADH_PPDR2 (0x04) /* FB_AD26 */ ++#define MCF_GPIO_PPDSDR_FBADH_PPDR3 (0x08) /* FB_AD27 */ ++#define MCF_GPIO_PPDSDR_FBADH_PPDR4 (0x10) /* FB_AD28 */ ++#define MCF_GPIO_PPDSDR_FBADH_PPDR5 (0x20) /* FB_AD29 */ ++#define MCF_GPIO_PPDSDR_FBADH_PPDR6 (0x40) /* FB_AD30 */ ++#define MCF_GPIO_PPDSDR_FBADH_PPDR7 (0x80) /* FB_AD31 */ ++ ++/* Bit definitions and macros for PPDSDR_FBADMH */ ++#define MCF_GPIO_PPDSDR_FBADMH_PPDR0 (0x01) /* FB_AD16 */ ++#define MCF_GPIO_PPDSDR_FBADMH_PPDR1 (0x02) /* FB_AD17 */ ++#define MCF_GPIO_PPDSDR_FBADMH_PPDR2 (0x04) /* FB_AD18 */ ++#define MCF_GPIO_PPDSDR_FBADMH_PPDR3 (0x08) /* FB_AD19 */ ++#define MCF_GPIO_PPDSDR_FBADMH_PPDR4 (0x10) /* FB_AD20 */ ++#define MCF_GPIO_PPDSDR_FBADMH_PPDR5 (0x20) /* FB_AD21 */ ++#define MCF_GPIO_PPDSDR_FBADMH_PPDR6 (0x40) /* FB_AD22 */ ++#define MCF_GPIO_PPDSDR_FBADMH_PPDR7 (0x80) /* FB_AD23 */ ++ ++/* Bit definitions and macros for PPDSDR_FBADML */ ++#define MCF_GPIO_PPDSDR_FBADML_PPDR0 (0x01) /* FB_AD8 */ ++#define MCF_GPIO_PPDSDR_FBADML_PPDR1 (0x02) /* FB_AD9 */ ++#define MCF_GPIO_PPDSDR_FBADML_PPDR2 (0x04) /* FB_AD10 */ ++#define MCF_GPIO_PPDSDR_FBADML_PPDR3 (0x08) /* FB_AD11 */ ++#define MCF_GPIO_PPDSDR_FBADML_PPDR4 (0x10) /* FB_AD12 */ ++#define MCF_GPIO_PPDSDR_FBADML_PPDR5 (0x20) /* FB_AD13 */ ++#define MCF_GPIO_PPDSDR_FBADML_PPDR6 (0x40) /* FB_AD14 */ ++#define MCF_GPIO_PPDSDR_FBADML_PPDR7 (0x80) /* FB_AD15 */ ++ ++/* Bit definitions and macros for PPDSDR_FBADL */ ++#define MCF_GPIO_PPDSDR_FBADL_PPDR0 (0x01) /* FB_AD0 */ ++#define MCF_GPIO_PPDSDR_FBADL_PPDR1 (0x02) /* FB_AD1 */ ++#define MCF_GPIO_PPDSDR_FBADL_PPDR2 (0x04) /* FB_AD2 */ ++#define MCF_GPIO_PPDSDR_FBADL_PPDR3 (0x08) /* FB_AD3 */ ++#define MCF_GPIO_PPDSDR_FBADL_PPDR4 (0x10) /* FB_AD4 */ ++#define MCF_GPIO_PPDSDR_FBADL_PPDR5 (0x20) /* FB_AD5 */ ++#define MCF_GPIO_PPDSDR_FBADL_PPDR6 (0x40) /* FB_AD6 */ ++#define MCF_GPIO_PPDSDR_FBADL_PPDR7 (0x80) /* FB_AD7 */ ++ ++/* Bit definitions and macros for PCLRR_FEC0H */ ++#define MCF_GPIO_PCLRR_FEC0H_PCLRR0 (0x01) /* FEC0_CRS / ULPI_DATA6 */ ++#define MCF_GPIO_PCLRR_FEC0H_PCLRR1 (0x02) /* FEC0_RXD0 / FEC0_RMII_RXD0 */ ++#define MCF_GPIO_PCLRR_FEC0H_PCLRR2 (0x04) /* FEC0_RXDV/FEC0_RMII_CRS_DV */ ++#define MCF_GPIO_PCLRR_FEC0H_PCLRR3 (0x08) /* FEC0_RXCLK / ULPI_DATA1 */ ++#define MCF_GPIO_PCLRR_FEC0H_PCLRR4 (0x10) /* FEC0_COL / ULPI_DATA7 */ ++#define MCF_GPIO_PCLRR_FEC0H_PCLRR5 (0x20) /* FEC0_TXD0 / FEC0_RMII_TXD0 */ ++#define MCF_GPIO_PCLRR_FEC0H_PCLRR6 (0x40) /* FEC0_TXEN / FEC0_RMII_TXEN */ ++#define MCF_GPIO_PCLRR_FEC0H_PCLRR7 (0x80) /* FEC0_TXCLK / FEC0_RMII_REF_CLK */ ++ ++/* Bit definitions and macros for PCLRR_FEC0L */ ++#define MCF_GPIO_PCLRR_FEC0L_PPDR0 (0x01) /* FEC0_RXER / FEC0_RMII_RXER */ ++#define MCF_GPIO_PCLRR_FEC0L_PPDR1 (0x02) /* FEC0_RXD1 / FEC0_RMII_RXD1 */ ++#define MCF_GPIO_PCLRR_FEC0L_PPDR2 (0x04) /* FEC0_RXD2 / ULPI_DATA4 */ ++#define MCF_GPIO_PCLRR_FEC0L_PPDR3 (0x08) /* FEC0_RXD3 / ULPI_DATA5 */ ++#define MCF_GPIO_PCLRR_FEC0L_PPDR4 (0x10) /* FEC0_TXER / ULPI_DATA0 */ ++#define MCF_GPIO_PCLRR_FEC0L_PPDR5 (0x20) /* FEC0_TXD1 / FEC0_RMII_TXD1 */ ++#define MCF_GPIO_PCLRR_FEC0L_PPDR6 (0x40) /* FEC0_TXD2 / ULPI_DATA2 */ ++#define MCF_GPIO_PCLRR_FEC0L_PPDR7 (0x80) /* FEC0_TXD3 / ULPI_DATA3 */ ++ ++/* Bit definitions and macros for PCLRR_SSI */ ++#define MCF_GPIO_PCLRR_SSI_PCLRR0 (0x01) /* SSI_TXD / U1TXD */ ++#define MCF_GPIO_PCLRR_SSI_PCLRR1 (0x02) /* SSI_RXD / U1RXD */ ++#define MCF_GPIO_PCLRR_SSI_PCLRR2 (0x04) /* SSI_FS / U1RTS */ ++#define MCF_GPIO_PCLRR_SSI_PCLRR3 (0x08) /* SSI_BCLK / U1CTS */ ++#define MCF_GPIO_PCLRR_SSI_PCLRR4 (0x10) /* SSI_MCLK */ ++ ++/* Bit definitions and macros for PCLRR_FBCTL */ ++#define MCF_GPIO_PCLRR_FBCTL_PCLRR0 (0x01) /* FB_TS / FB_ALE / FB_TBST */ ++#define MCF_GPIO_PCLRR_FBCTL_PCLRR1 (0x02) /* FB_RW */ ++#define MCF_GPIO_PCLRR_FBCTL_PCLRR2 (0x04) /* FB_TA */ ++#define MCF_GPIO_PCLRR_FBCTL_PCLRR3 (0x08) /* FB_OE */ ++ ++/* Bit definitions and macros for PCLRR_BE */ ++#define MCF_GPIO_PCLRR_BE_PCLRR0 (0x01) /* FB_BE/BWE0 / FB_SIZ0 */ ++#define MCF_GPIO_PCLRR_BE_PCLRR1 (0x02) /* FB_BE/BWE1 / FB_SIZ1 */ ++#define MCF_GPIO_PCLRR_BE_PCLRR2 (0x04) /* FB_BE/BWE2 / FB_SIZ2 */ ++#define MCF_GPIO_PCLRR_BE_PCLRR3 (0x08) /* FB_BE/BWE3 / FB_SIZ3 */ ++ ++/* Bit definitions and macros for PCLRR_CS */ ++#define MCF_GPIO_PCLRR_CS_PCLRR1 (0x02) /* FB_CS1 */ ++#define MCF_GPIO_PCLRR_CS_PCLRR2 (0x04) /* FB_CS2 */ ++#define MCF_GPIO_PCLRR_CS_PCLRR3 (0x08) /* FB_CS3 */ ++ ++/* Bit definitions and macros for PCLRR_DMA */ ++#define MCF_GPIO_PCLRR_DMA_PCLRR0 (0x01) /* DREQ0 */ ++#define MCF_GPIO_PCLRR_DMA_PCLRR1 (0x02) /* DACK0 / DSPI_PCS3 */ ++#define MCF_GPIO_PCLRR_DMA_PCLRR2 (0x04) /* DREQ1 / USB_CLKIN */ ++#define MCF_GPIO_PCLRR_DMA_PCLRR3 (0x08) /* DACK1 / ULPI_DIR */ ++ ++/* Bit definitions and macros for PCLRR_FECI2C */ ++#define MCF_GPIO_PCLRR_FECI2C_PCLRR0 (0x01) /* I2C_SDA / U2RXD */ ++#define MCF_GPIO_PCLRR_FECI2C_PCLRR1 (0x02) /* I2C_SCL / U2TXD */ ++#define MCF_GPIO_PCLRR_FECI2C_PCLRR2 (0x04) /* FEC0_MDIO */ ++#define MCF_GPIO_PCLRR_FECI2C_PCLRR3 (0x08) /* FEC0_MDC */ ++#define MCF_GPIO_PCLRR_FECI2C_PCLRR4 (0x10) /* FEC1_MDIO / ATA_DIOW */ ++#define MCF_GPIO_PCLRR_FECI2C_PCLRR5 (0x20) /* FEC1_MDC / ATA_DIOR */ ++ ++/* Bit definitions and macros for PCLRR_UART */ ++#define MCF_GPIO_PCLRR_UART_PCLRR0 (0x01) /* U1TXD */ ++#define MCF_GPIO_PCLRR_UART_PCLRR1 (0x02) /* U1RXD */ ++#define MCF_GPIO_PCLRR_UART_PCLRR2 (0x04) /* U1RTS */ ++#define MCF_GPIO_PCLRR_UART_PCLRR3 (0x08) /* U0CTS */ ++#define MCF_GPIO_PCLRR_UART_PCLRR4 (0x10) /* U1TXD */ ++#define MCF_GPIO_PCLRR_UART_PCLRR5 (0x20) /* U1RXD */ ++#define MCF_GPIO_PCLRR_UART_PCLRR6 (0x40) /* U1RTS */ ++#define MCF_GPIO_PCLRR_UART_PCLRR7 (0x80) /* U1CTS */ ++ ++/* Bit definitions and macros for PCLRR_DSPI */ ++#define MCF_GPIO_PCLRR_DSPI_PCLRR0 (0x01) /* DSPI_SOUT / SBF_DO */ ++#define MCF_GPIO_PCLRR_DSPI_PCLRR1 (0x02) /* DSPI_SIN / SBF_DI */ ++#define MCF_GPIO_PCLRR_DSPI_PCLRR2 (0x04) /* DSPI_SCK / SBF_CK */ ++#define MCF_GPIO_PCLRR_DSPI_PCLRR3 (0x08) /* DSPI_PCS0/SS */ ++#define MCF_GPIO_PCLRR_DSPI_PCLRR4 (0x10) /* DSPI_PCS1 / SBF_CS */ ++#define MCF_GPIO_PCLRR_DSPI_PCLRR5 (0x20) /* DSPI_PCS2 */ ++#define MCF_GPIO_PCLRR_DSPI_PCLRR6 (0x40) /* DSPI_PCS5/SS */ ++ ++/* Bit definitions and macros for PCLRR_TIMER */ ++#define MCF_GPIO_PCLRR_TIMER_PCLRR0 (0x01) /* T0IN / T0OUT / U2RTS */ ++#define MCF_GPIO_PCLRR_TIMER_PCLRR1 (0x02) /* T1IN / T1OUT / U2CTS */ ++#define MCF_GPIO_PCLRR_TIMER_PCLRR2 (0x04) /* T2IN / T2OUT / U2TXD */ ++#define MCF_GPIO_PCLRR_TIMER_PCLRR3 (0x08) /* T3IN / T3OUT / U2RXD */ ++ ++/* Bit definitions and macros for PCLRR_PCI */ ++#define MCF_GPIO_PCLRR_PCI_PCLRR0 (0x01) /* PCI_REQ0/PCI_EXTGNT */ ++#define MCF_GPIO_PCLRR_PCI_PCLRR1 (0x02) /* PCI_REQ1 */ ++#define MCF_GPIO_PCLRR_PCI_PCLRR2 (0x04) /* PCI_REQ2 */ ++#define MCF_GPIO_PCLRR_PCI_PCLRR3 (0x08) /* PCI_REQ3 / ATA_INTR */ ++#define MCF_GPIO_PCLRR_PCI_PCLRR4 (0x10) /* PCI_GNT0/PCI_EXTREQ */ ++#define MCF_GPIO_PCLRR_PCI_PCLRR5 (0x20) /* PCI_GNT1 / */ ++#define MCF_GPIO_PCLRR_PCI_PCLRR6 (0x40) /* PCI_GNT2 / */ ++#define MCF_GPIO_PCLRR_PCI_PCLRR7 (0x80) /* PCI_GNT3 / ATA_DMACK */ ++ ++/* Bit definitions and macros for PCLRR_USB */ ++#define MCF_GPIO_PCLRR_USB_PCLRR0 (0x01) /* USB_VBUS_OC / ULPI_STP */ ++#define MCF_GPIO_PCLRR_USB_PCLRR1 (0x02) /* USB_VBUS_EN / USB_PULLUP / ULPI_NXT */ ++ ++/* Bit definitions and macros for PCLRR_ATAH */ ++#define MCF_GPIO_PCLRR_ATAH_PCLRR0 (0x01) /* ATA_DA0 */ ++#define MCF_GPIO_PCLRR_ATAH_PCLRR1 (0x02) /* ATA_DA1 */ ++#define MCF_GPIO_PCLRR_ATAH_PCLRR2 (0x04) /* ATA_DA2 */ ++#define MCF_GPIO_PCLRR_ATAH_PCLRR3 (0x08) /* ATA_CS0 */ ++#define MCF_GPIO_PCLRR_ATAH_PCLRR4 (0x10) /* ATA_CS1 */ ++#define MCF_GPIO_PCLRR_ATAH_PCLRR5 (0x20) /* ATA_BUFFER_EN */ ++ ++/* Bit definitions and macros for PCLRR_ATAL */ ++#define MCF_GPIO_PCLRR_ATAL_PCLRR0 (0x01) /* ATA_IORDY */ ++#define MCF_GPIO_PCLRR_ATAL_PCLRR1 (0x02) /* ATA_DMARQ */ ++#define MCF_GPIO_PCLRR_ATAL_PCLRR2 (0x04) /* ATA_RESET */ ++ ++/* Bit definitions and macros for PCLRR_FEC1H */ ++#define MCF_GPIO_PCLRR_FEC1H_PCLRR0 (0x01) /* FEC1_CRS / ATA_DATA6 */ ++#define MCF_GPIO_PCLRR_FEC1H_PCLRR1 (0x02) /* FEC1_RXD0 / FEC1_RMII_RXD0 / ATA_DATA13 */ ++#define MCF_GPIO_PCLRR_FEC1H_PCLRR2 (0x04) /* FEC1_RXDV / FEC1_RMII_CRS_DV / ATA_DATA15 */ ++#define MCF_GPIO_PCLRR_FEC1H_PCLRR3 (0x08) /* FEC1_RXCLK / ATA_DATA5 */ ++#define MCF_GPIO_PCLRR_FEC1H_PCLRR4 (0x10) /* FEC1_COL / ATA_DATA7 */ ++#define MCF_GPIO_PCLRR_FEC1H_PCLRR5 (0x20) /* FEC1_TXD0 / FEC1_RMII_TXD0 / ATA_DATA9 */ ++#define MCF_GPIO_PCLRR_FEC1H_PCLRR6 (0x40) /* FEC1_TXEN / FEC1_RMII_TXEN / ATA_DATA8 */ ++#define MCF_GPIO_PCLRR_FEC1H_PCLRR7 (0x80) /* FEC1_TXCLK / FEC1_RMII_REF_CLK / ATA_DATA11 */ ++ ++/* Bit definitions and macros for PCLRR_FEC1L */ ++#define MCF_GPIO_PCLRR_FEC1L_PCLRR0 (0x01) /* FEC1_RXER / FEC1_RMII_RXER / ATA_DATA12 */ ++#define MCF_GPIO_PCLRR_FEC1L_PCLRR1 (0x02) /* FEC1_RXD1 / FEC1_RMII_RXD1 / ATA_DATA14 */ ++#define MCF_GPIO_PCLRR_FEC1L_PCLRR2 (0x04) /* FEC1_RXD2 / ATA_DATA3 */ ++#define MCF_GPIO_PCLRR_FEC1L_PCLRR3 (0x08) /* FEC1_RXD3 / ATA_DATA4 */ ++#define MCF_GPIO_PCLRR_FEC1L_PCLRR4 (0x10) /* FEC1_TXER / ATA_DATA0 */ ++#define MCF_GPIO_PCLRR_FEC1L_PCLRR5 (0x20) /* FEC1_TXD1 / FEC1_RMII_TXD1 / ATA_DATA10 */ ++#define MCF_GPIO_PCLRR_FEC1L_PCLRR6 (0x40) /* FEC1_TXD2 / ATA_DATA1 */ ++#define MCF_GPIO_PCLRR_FEC1L_PCLRR7 (0x80) /* FEC1_TXD3 / ATA_DATA2 */ ++ ++/* Bit definitions and macros for PCLRR_FBADH */ ++#define MCF_GPIO_PCLRR_FBADH_PCLRR0 (0x01) /* FB_AD24 */ ++#define MCF_GPIO_PCLRR_FBADH_PCLRR1 (0x02) /* FB_AD25 */ ++#define MCF_GPIO_PCLRR_FBADH_PCLRR2 (0x04) /* FB_AD26 */ ++#define MCF_GPIO_PCLRR_FBADH_PCLRR3 (0x08) /* FB_AD27 */ ++#define MCF_GPIO_PCLRR_FBADH_PCLRR4 (0x10) /* FB_AD28 */ ++#define MCF_GPIO_PCLRR_FBADH_PCLRR5 (0x20) /* FB_AD29 */ ++#define MCF_GPIO_PCLRR_FBADH_PCLRR6 (0x40) /* FB_AD30 */ ++#define MCF_GPIO_PCLRR_FBADH_PCLRR7 (0x80) /* FB_AD31 */ ++ ++/* Bit definitions and macros for PCLRR_FBADMH */ ++#define MCF_GPIO_PCLRR_FBADMH_PCLRR0 (0x01) /* FB_AD16 */ ++#define MCF_GPIO_PCLRR_FBADMH_PCLRR1 (0x02) /* FB_AD17 */ ++#define MCF_GPIO_PCLRR_FBADMH_PCLRR2 (0x04) /* FB_AD18 */ ++#define MCF_GPIO_PCLRR_FBADMH_PCLRR3 (0x08) /* FB_AD19 */ ++#define MCF_GPIO_PCLRR_FBADMH_PCLRR4 (0x10) /* FB_AD20 */ ++#define MCF_GPIO_PCLRR_FBADMH_PCLRR5 (0x20) /* FB_AD21 */ ++#define MCF_GPIO_PCLRR_FBADMH_PCLRR6 (0x40) /* FB_AD22 */ ++#define MCF_GPIO_PCLRR_FBADMH_PCLRR7 (0x80) /* FB_AD23 */ ++ ++/* Bit definitions and macros for PCLRR_FBADML */ ++#define MCF_GPIO_PCLRR_FBADML_PCLRR0 (0x01) /* FB_AD8 */ ++#define MCF_GPIO_PCLRR_FBADML_PCLRR1 (0x02) /* FB_AD9 */ ++#define MCF_GPIO_PCLRR_FBADML_PCLRR2 (0x04) /* FB_AD10 */ ++#define MCF_GPIO_PCLRR_FBADML_PCLRR3 (0x08) /* FB_AD11 */ ++#define MCF_GPIO_PCLRR_FBADML_PCLRR4 (0x10) /* FB_AD12 */ ++#define MCF_GPIO_PCLRR_FBADML_PCLRR5 (0x20) /* FB_AD13 */ ++#define MCF_GPIO_PCLRR_FBADML_PCLRR6 (0x40) /* FB_AD14 */ ++#define MCF_GPIO_PCLRR_FBADML_PCLRR7 (0x80) /* FB_AD15 */ ++ ++/* Bit definitions and macros for PCLRR_FBADL */ ++#define MCF_GPIO_PCLRR_FBADL_PCLRR0 (0x01) /* FB_AD0 */ ++#define MCF_GPIO_PCLRR_FBADL_PCLRR1 (0x02) /* FB_AD1 */ ++#define MCF_GPIO_PCLRR_FBADL_PCLRR2 (0x04) /* FB_AD2 */ ++#define MCF_GPIO_PCLRR_FBADL_PCLRR3 (0x08) /* FB_AD3 */ ++#define MCF_GPIO_PCLRR_FBADL_PCLRR4 (0x10) /* FB_AD4 */ ++#define MCF_GPIO_PCLRR_FBADL_PCLRR5 (0x20) /* FB_AD5 */ ++#define MCF_GPIO_PCLRR_FBADL_PCLRR6 (0x40) /* FB_AD6 */ ++#define MCF_GPIO_PCLRR_FBADL_PCLRR7 (0x80) /* FB_AD7 */ ++ ++/* Bit definitions and macros for PAR_FEC */ ++#define MCF_GPIO_PAR_FEC_FEC0(x) (((x)&0x07)) ++#define MCF_GPIO_PAR_FEC_FEC1(x) (((x)&0x07)<<4) ++#define MCF_GPIO_PAR_FEC_FEC1_MASK (0x8F) ++#define MCF_GPIO_PAR_FEC_FEC1_MII (0x70) ++#define MCF_GPIO_PAR_FEC_FEC1_RMII_GPIO (0x30) ++#define MCF_GPIO_PAR_FEC_FEC1_RMII_ATA (0x20) ++#define MCF_GPIO_PAR_FEC_FEC1_ATA (0x10) ++#define MCF_GPIO_PAR_FEC_FEC1_GPIO (0x00) ++#define MCF_GPIO_PAR_FEC_FEC0_MASK (0xF8) ++#define MCF_GPIO_PAR_FEC_FEC0_MII (0x07) ++#define MCF_GPIO_PAR_FEC_FEC0_RMII_GPIO (0x03) ++#define MCF_GPIO_PAR_FEC_FEC0_RMII_ULPI (0x02) ++#define MCF_GPIO_PAR_FEC_FEC0_ULPI (0x01) ++#define MCF_GPIO_PAR_FEC_FEC0_GPIO (0x00) ++ ++/* Bit definitions and macros for PAR_DMA */ ++#define MCF_GPIO_PAR_DMA_DREQ0 (0x01) ++#define MCF_GPIO_PAR_DMA_DACK0(x) (((x)&0x03)<<2) ++#define MCF_GPIO_PAR_DMA_DREQ1(x) (((x)&0x03)<<4) ++#define MCF_GPIO_PAR_DMA_DACK1(x) (((x)&0x03)<<6) ++#define MCF_GPIO_PAR_DMA_DACK1_MASK (0x3F) ++#define MCF_GPIO_PAR_DMA_DACK1_DACK1 (0xC0) ++#define MCF_GPIO_PAR_DMA_DACK1_ULPI_DIR (0x40) ++#define MCF_GPIO_PAR_DMA_DACK1_GPIO (0x00) ++#define MCF_GPIO_PAR_DMA_DREQ1_MASK (0xCF) ++#define MCF_GPIO_PAR_DMA_DREQ1_DREQ1 (0x30) ++#define MCF_GPIO_PAR_DMA_DREQ1_USB_CLKIN (0x10) ++#define MCF_GPIO_PAR_DMA_DREQ1_GPIO (0x00) ++#define MCF_GPIO_PAR_DMA_DACK0_MASK (0xF3) ++#define MCF_GPIO_PAR_DMA_DACK0_DACK1 (0x0C) ++#define MCF_GPIO_PAR_DMA_DACK0_ULPI_DIR (0x04) ++#define MCF_GPIO_PAR_DMA_DACK0_GPIO (0x00) ++#define MCF_GPIO_PAR_DMA_DREQ0_DREQ0 (0x01) ++#define MCF_GPIO_PAR_DMA_DREQ0_GPIO (0x00) ++ ++/* Bit definitions and macros for PAR_FBCTL */ ++#define MCF_GPIO_PAR_FBCTL_TS(x) (((x)&0x03)<<3) ++#define MCF_GPIO_PAR_FBCTL_RW (0x20) ++#define MCF_GPIO_PAR_FBCTL_TA (0x40) ++#define MCF_GPIO_PAR_FBCTL_OE (0x80) ++#define MCF_GPIO_PAR_FBCTL_OE_OE (0x80) ++#define MCF_GPIO_PAR_FBCTL_OE_GPIO (0x00) ++#define MCF_GPIO_PAR_FBCTL_TA_TA (0x40) ++#define MCF_GPIO_PAR_FBCTL_TA_GPIO (0x00) ++#define MCF_GPIO_PAR_FBCTL_RW_RW (0x20) ++#define MCF_GPIO_PAR_FBCTL_RW_GPIO (0x00) ++#define MCF_GPIO_PAR_FBCTL_TS_MASK (0xE7) ++#define MCF_GPIO_PAR_FBCTL_TS_TS (0x18) ++#define MCF_GPIO_PAR_FBCTL_TS_ALE (0x10) ++#define MCF_GPIO_PAR_FBCTL_TS_TBST (0x08) ++#define MCF_GPIO_PAR_FBCTL_TS_GPIO (0x80) ++ ++/* Bit definitions and macros for PAR_DSPI */ ++#define MCF_GPIO_PAR_DSPI_SCK (0x01) ++#define MCF_GPIO_PAR_DSPI_SOUT (0x02) ++#define MCF_GPIO_PAR_DSPI_SIN (0x04) ++#define MCF_GPIO_PAR_DSPI_PCS0 (0x08) ++#define MCF_GPIO_PAR_DSPI_PCS1 (0x10) ++#define MCF_GPIO_PAR_DSPI_PCS2 (0x20) ++#define MCF_GPIO_PAR_DSPI_PCS5 (0x40) ++#define MCF_GPIO_PAR_DSPI_PCS5_PCS5 (0x40) ++#define MCF_GPIO_PAR_DSPI_PCS5_GPIO (0x00) ++#define MCF_GPIO_PAR_DSPI_PCS2_PCS2 (0x20) ++#define MCF_GPIO_PAR_DSPI_PCS2_GPIO (0x00) ++#define MCF_GPIO_PAR_DSPI_PCS1_PCS1 (0x10) ++#define MCF_GPIO_PAR_DSPI_PCS1_GPIO (0x00) ++#define MCF_GPIO_PAR_DSPI_PCS0_PCS0 (0x08) ++#define MCF_GPIO_PAR_DSPI_PCS0_GPIO (0x00) ++#define MCF_GPIO_PAR_DSPI_SIN_SIN (0x04) ++#define MCF_GPIO_PAR_DSPI_SIN_GPIO (0x00) ++#define MCF_GPIO_PAR_DSPI_SOUT_SOUT (0x02) ++#define MCF_GPIO_PAR_DSPI_SOUT_GPIO (0x00) ++#define MCF_GPIO_PAR_DSPI_SCK_SCK (0x01) ++#define MCF_GPIO_PAR_DSPI_SCK_GPIO (0x00) ++ ++/* Bit definitions and macros for PAR_BE */ ++#define MCF_GPIO_PAR_BE_BE0 (0x01) ++#define MCF_GPIO_PAR_BE_BE1 (0x04) ++#define MCF_GPIO_PAR_BE_BE2(x) (((x)&0x03)<<4) ++#define MCF_GPIO_PAR_BE_BE3(x) (((x)&0x03)<<6) ++#define MCF_GPIO_PAR_BE_BE3_MASK (0x3F) ++#define MCF_GPIO_PAR_BE_BE3_BE3 (0xC0) ++#define MCF_GPIO_PAR_BE_BE3_TSIZ1 (0x80) ++#define MCF_GPIO_PAR_BE_BE3_GPIO (0x00) ++#define MCF_GPIO_PAR_BE_BE2_MASK (0xCF) ++#define MCF_GPIO_PAR_BE_BE2_BE2 (0x30) ++#define MCF_GPIO_PAR_BE_BE2_TSIZ0 (0x20) ++#define MCF_GPIO_PAR_BE_BE2_GPIO (0x00) ++#define MCF_GPIO_PAR_BE_BE1_BE1 (0x04) ++#define MCF_GPIO_PAR_BE_BE1_GPIO (0x00) ++#define MCF_GPIO_PAR_BE_BE0_BE0 (0x01) ++#define MCF_GPIO_PAR_BE_BE0_GPIO (0x00) ++ ++/* Bit definitions and macros for PAR_CS */ ++#define MCF_GPIO_PAR_CS_CS1 (0x02) ++#define MCF_GPIO_PAR_CS_CS2 (0x04) ++#define MCF_GPIO_PAR_CS_CS3 (0x08) ++#define MCF_GPIO_PAR_CS_CS3_CS3 (0x08) ++#define MCF_GPIO_PAR_CS_CS3_GPIO (0x00) ++#define MCF_GPIO_PAR_CS_CS2_CS2 (0x04) ++#define MCF_GPIO_PAR_CS_CS2_GPIO (0x00) ++#define MCF_GPIO_PAR_CS_CS1_CS1 (0x02) ++#define MCF_GPIO_PAR_CS_CS1_GPIO (0x00) ++ ++/* Bit definitions and macros for PAR_TIMER */ ++#define MCF_GPIO_PAR_TIMER_T0IN(x) (((x)&0x03)) ++#define MCF_GPIO_PAR_TIMER_T1IN(x) (((x)&0x03)<<2) ++#define MCF_GPIO_PAR_TIMER_T2IN(x) (((x)&0x03)<<4) ++#define MCF_GPIO_PAR_TIMER_T3IN(x) (((x)&0x03)<<6) ++#define MCF_GPIO_PAR_TIMER_T3IN_MASK (0x3F) ++#define MCF_GPIO_PAR_TIMER_T3IN_T3IN (0xC0) ++#define MCF_GPIO_PAR_TIMER_T3IN_T3OUT (0x80) ++#define MCF_GPIO_PAR_TIMER_T3IN_U2RXD (0x40) ++#define MCF_GPIO_PAR_TIMER_T3IN_GPIO (0x00) ++#define MCF_GPIO_PAR_TIMER_T2IN_MASK (0xCF) ++#define MCF_GPIO_PAR_TIMER_T2IN_T2IN (0x30) ++#define MCF_GPIO_PAR_TIMER_T2IN_T2OUT (0x20) ++#define MCF_GPIO_PAR_TIMER_T2IN_U2TXD (0x10) ++#define MCF_GPIO_PAR_TIMER_T2IN_GPIO (0x00) ++#define MCF_GPIO_PAR_TIMER_T1IN_MASK (0xF3) ++#define MCF_GPIO_PAR_TIMER_T1IN_T1IN (0x0C) ++#define MCF_GPIO_PAR_TIMER_T1IN_T1OUT (0x08) ++#define MCF_GPIO_PAR_TIMER_T1IN_U2CTS (0x04) ++#define MCF_GPIO_PAR_TIMER_T1IN_GPIO (0x00) ++#define MCF_GPIO_PAR_TIMER_T0IN_MASK (0xFC) ++#define MCF_GPIO_PAR_TIMER_T0IN_T0IN (0x03) ++#define MCF_GPIO_PAR_TIMER_T0IN_T0OUT (0x02) ++#define MCF_GPIO_PAR_TIMER_T0IN_U2RTS (0x01) ++#define MCF_GPIO_PAR_TIMER_T0IN_GPIO (0x00) ++ ++/* Bit definitions and macros for PAR_USB */ ++#define MCF_GPIO_PAR_USB_VBUSOC(x) (((x)&0x03)) ++#define MCF_GPIO_PAR_USB_VBUSEN(x) (((x)&0x03)<<2) ++#define MCF_GPIO_PAR_USB_VBUSEN_MASK (0xF3) ++#define MCF_GPIO_PAR_USB_VBUSEN_VBUSEN (0x0C) ++#define MCF_GPIO_PAR_USB_VBUSEN_USBPULLUP (0x08) ++#define MCF_GPIO_PAR_USB_VBUSEN_ULPI_NXT (0x04) ++#define MCF_GPIO_PAR_USB_VBUSEN_GPIO (0x00) ++#define MCF_GPIO_PAR_USB_VBUSOC_MASK (0xFC) ++#define MCF_GPIO_PAR_USB_VBUSOC_VBUSOC (0x03) ++#define MCF_GPIO_PAR_USB_VBUSOC_ULPI_STP (0x01) ++#define MCF_GPIO_PAR_USB_VBUSOC_GPIO (0x00) ++ ++/* Bit definitions and macros for PAR_UART */ ++#define MCF_GPIO_PAR_UART_U0TXD (0x01) ++#define MCF_GPIO_PAR_UART_U0RXD (0x02) ++#define MCF_GPIO_PAR_UART_U0RTS (0x04) ++#define MCF_GPIO_PAR_UART_U0CTS (0x08) ++#define MCF_GPIO_PAR_UART_U1TXD (0x10) ++#define MCF_GPIO_PAR_UART_U1RXD (0x20) ++#define MCF_GPIO_PAR_UART_U1RTS (0x40) ++#define MCF_GPIO_PAR_UART_U1CTS (0x80) ++#define MCF_GPIO_PAR_UART_U1CTS_U1CTS (0x80) ++#define MCF_GPIO_PAR_UART_U1CTS_GPIO (0x00) ++#define MCF_GPIO_PAR_UART_U1RTS_U1RTS (0x40) ++#define MCF_GPIO_PAR_UART_U1RTS_GPIO (0x00) ++#define MCF_GPIO_PAR_UART_U1RXD_U1RXD (0x20) ++#define MCF_GPIO_PAR_UART_U1RXD_GPIO (0x00) ++#define MCF_GPIO_PAR_UART_U1TXD_U1TXD (0x10) ++#define MCF_GPIO_PAR_UART_U1TXD_GPIO (0x00) ++#define MCF_GPIO_PAR_UART_U0CTS_U0CTS (0x08) ++#define MCF_GPIO_PAR_UART_U0CTS_GPIO (0x00) ++#define MCF_GPIO_PAR_UART_U0RTS_U0RTS (0x04) ++#define MCF_GPIO_PAR_UART_U0RTS_GPIO (0x00) ++#define MCF_GPIO_PAR_UART_U0RXD_U0RXD (0x02) ++#define MCF_GPIO_PAR_UART_U0RXD_GPIO (0x00) ++#define MCF_GPIO_PAR_UART_U0TXD_U0TXD (0x01) ++#define MCF_GPIO_PAR_UART_U0TXD_GPIO (0x00) ++ ++/* Bit definitions and macros for PAR_FECI2C */ ++#define MCF_GPIO_PAR_FECI2C_SDA(x) (((x)&0x0003)) ++#define MCF_GPIO_PAR_FECI2C_SCL(x) (((x)&0x0003)<<2) ++#define MCF_GPIO_PAR_FECI2C_PAR_SDA(x) (((x)&0x0003)) ++#define MCF_GPIO_PAR_FECI2C_PAR_SCL(x) (((x)&0x0003)<<2) ++#define MCF_GPIO_PAR_FECI2C_MDIO0 (0x0010) ++#define MCF_GPIO_PAR_FECI2C_MDC0 (0x0040) ++#define MCF_GPIO_PAR_FECI2C_MDIO1(x) (((x)&0x0003)<<8) ++#define MCF_GPIO_PAR_FECI2C_MDC1(x) (((x)&0x0003)<<10) ++#define MCF_GPIO_PAR_FECI2C_MDC1_MASK (0xF3FF) ++#define MCF_GPIO_PAR_FECI2C_MDC1_MDC1 (0x0C00) ++#define MCF_GPIO_PAR_FECI2C_MDC1_ATA_DIOR (0x0800) ++#define MCF_GPIO_PAR_FECI2C_MDC1_GPIO (0x0000) ++#define MCF_GPIO_PAR_FECI2C_MDIO1_MASK (0xFCFF) ++#define MCF_GPIO_PAR_FECI2C_MDIO1_MDIO1 (0x0300) ++#define MCF_GPIO_PAR_FECI2C_MDIO1_ATA_DIOW (0x0200) ++#define MCF_GPIO_PAR_FECI2C_MDIO1_GPIO (0x0000) ++#define MCF_GPIO_PAR_FECI2C_MDC0_MDC0 (0x0040) ++#define MCF_GPIO_PAR_FECI2C_MDC0_GPIO (0x0000) ++#define MCF_GPIO_PAR_FECI2C_MDIO0_MDIO0 (0x0010) ++#define MCF_GPIO_PAR_FECI2C_MDIO0_GPIO (0x0000) ++#define MCF_GPIO_PAR_FECI2C_SCL_MASK (0xFFF3) ++#define MCF_GPIO_PAR_FECI2C_SCL_SCL (0x000C) ++#define MCF_GPIO_PAR_FECI2C_SCL_U2TXD (0x0004) ++#define MCF_GPIO_PAR_FECI2C_SCL_GPIO (0x0000) ++#define MCF_GPIO_PAR_FECI2C_SDA_MASK (0xFFFC) ++#define MCF_GPIO_PAR_FECI2C_SDA_SDA (0x0003) ++#define MCF_GPIO_PAR_FECI2C_SDA_U2RXD (0x0001) ++#define MCF_GPIO_PAR_FECI2C_SDA_GPIO (0x0000) ++ ++/* Bit definitions and macros for PAR_SSI */ ++#define MCF_GPIO_PAR_SSI_MCLK (0x0001) ++#define MCF_GPIO_PAR_SSI_STXD(x) (((x)&0x0003)<<2) ++#define MCF_GPIO_PAR_SSI_SRXD(x) (((x)&0x0003)<<4) ++#define MCF_GPIO_PAR_SSI_FS(x) (((x)&0x0003)<<6) ++#define MCF_GPIO_PAR_SSI_BCLK(x) (((x)&0x0003)<<8) ++#define MCF_GPIO_PAR_SSI_BCLK_MASK (0xFCFF) ++#define MCF_GPIO_PAR_SSI_BCLK_BCLK (0x0300) ++#define MCF_GPIO_PAR_SSI_BCLK_U1CTS (0x0200) ++#define MCF_GPIO_PAR_SSI_BCLK_GPIO (0x0000) ++#define MCF_GPIO_PAR_SSI_FS_MASK (0xFF3F) ++#define MCF_GPIO_PAR_SSI_FS_FS (0x00C0) ++#define MCF_GPIO_PAR_SSI_FS_U1RTS (0x0080) ++#define MCF_GPIO_PAR_SSI_FS_GPIO (0x0000) ++#define MCF_GPIO_PAR_SSI_SRXD_MASK (0xFFCF) ++#define MCF_GPIO_PAR_SSI_SRXD_SRXD (0x0030) ++#define MCF_GPIO_PAR_SSI_SRXD_U1RXD (0x0020) ++#define MCF_GPIO_PAR_SSI_SRXD_GPIO (0x0000) ++#define MCF_GPIO_PAR_SSI_STXD_MASK (0xFFF3) ++#define MCF_GPIO_PAR_SSI_STXD_STXD (0x000C) ++#define MCF_GPIO_PAR_SSI_STXD_U1TXD (0x0008) ++#define MCF_GPIO_PAR_SSI_STXD_GPIO (0x0000) ++#define MCF_GPIO_PAR_SSI_MCLK_MCLK (0x0001) ++#define MCF_GPIO_PAR_SSI_MCLK_GPIO (0x0000) ++ ++/* Bit definitions and macros for PAR_ATA */ ++#define MCF_GPIO_PAR_ATA_IORDY (0x0001) ++#define MCF_GPIO_PAR_ATA_DMARQ (0x0002) ++#define MCF_GPIO_PAR_ATA_RESET (0x0004) ++#define MCF_GPIO_PAR_ATA_DA0 (0x0020) ++#define MCF_GPIO_PAR_ATA_DA1 (0x0040) ++#define MCF_GPIO_PAR_ATA_DA2 (0x0080) ++#define MCF_GPIO_PAR_ATA_CS0 (0x0100) ++#define MCF_GPIO_PAR_ATA_CS1 (0x0200) ++#define MCF_GPIO_PAR_ATA_BUFEN (0x0400) ++#define MCF_GPIO_PAR_ATA_BUFEN_BUFEN (0x0400) ++#define MCF_GPIO_PAR_ATA_BUFEN_GPIO (0x0000) ++#define MCF_GPIO_PAR_ATA_CS1_CS1 (0x0200) ++#define MCF_GPIO_PAR_ATA_CS1_GPIO (0x0000) ++#define MCF_GPIO_PAR_ATA_CS0_CS0 (0x0100) ++#define MCF_GPIO_PAR_ATA_CS0_GPIO (0x0000) ++#define MCF_GPIO_PAR_ATA_DA2_DA2 (0x0080) ++#define MCF_GPIO_PAR_ATA_DA2_GPIO (0x0000) ++#define MCF_GPIO_PAR_ATA_DA1_DA1 (0x0040) ++#define MCF_GPIO_PAR_ATA_DA1_GPIO (0x0000) ++#define MCF_GPIO_PAR_ATA_DA0_DA0 (0x0020) ++#define MCF_GPIO_PAR_ATA_DA0_GPIO (0x0000) ++#define MCF_GPIO_PAR_ATA_RESET_RESET (0x0004) ++#define MCF_GPIO_PAR_ATA_RESET_GPIO (0x0000) ++#define MCF_GPIO_PAR_ATA_DMARQ_DMARQ (0x0002) ++#define MCF_GPIO_PAR_ATA_DMARQ_GPIO (0x0000) ++#define MCF_GPIO_PAR_ATA_IORDY_IORDY (0x0001) ++#define MCF_GPIO_PAR_ATA_IORDY_GPIO (0x0000) ++ ++/* Bit definitions and macros for PAR_IRQ */ ++#define MCF_GPIO_PAR_IRQ_IRQ1 (0x02) ++#define MCF_GPIO_PAR_IRQ_IRQ4 (0x10) ++#define MCF_GPIO_PAR_IRQ_IRQ4_IRQ4 (0x10) ++#define MCF_GPIO_PAR_IRQ_IRQ4_GPIO (0x00) ++#define MCF_GPIO_PAR_IRQ_IRQ1_IRQ1 (0x02) ++#define MCF_GPIO_PAR_IRQ_IRQ1_GPIO (0x00) ++ ++/* Bit definitions and macros for PAR_PCI */ ++#define MCF_GPIO_PAR_PCI_REQ0 (0x0001) ++#define MCF_GPIO_PAR_PCI_REQ1 (0x0004) ++#define MCF_GPIO_PAR_PCI_REQ2 (0x0010) ++#define MCF_GPIO_PAR_PCI_REQ3(x) (((x)&0x0003)<<6) ++#define MCF_GPIO_PAR_PCI_GNT0 (0x0100) ++#define MCF_GPIO_PAR_PCI_GNT1 (0x0400) ++#define MCF_GPIO_PAR_PCI_GNT2 (0x1000) ++#define MCF_GPIO_PAR_PCI_GNT3(x) (((x)&0x0003)<<14) ++#define MCF_GPIO_PAR_PCI_GNT3_MASK (0x3FFF) ++#define MCF_GPIO_PAR_PCI_GNT3_GNT3 (0xC000) ++#define MCF_GPIO_PAR_PCI_GNT3_ATA_DMACK (0x8000) ++#define MCF_GPIO_PAR_PCI_GNT3_GPIO (0x0000) ++#define MCF_GPIO_PAR_PCI_GNT2_GNT2 (0x1000) ++#define MCF_GPIO_PAR_PCI_GNT2_GPIO (0x0000) ++#define MCF_GPIO_PAR_PCI_GNT1_GNT1 (0x0400) ++#define MCF_GPIO_PAR_PCI_GNT1_GPIO (0x0000) ++#define MCF_GPIO_PAR_PCI_GNT0_GNT0 (0x0100) ++#define MCF_GPIO_PAR_PCI_GNT0_GPIO (0x0000) ++#define MCF_GPIO_PAR_PCI_REQ3_MASK (0xFF3F) ++#define MCF_GPIO_PAR_PCI_REQ3_REQ3 (0x00C0) ++#define MCF_GPIO_PAR_PCI_REQ3_ATA_INTRQ (0x0080) ++#define MCF_GPIO_PAR_PCI_REQ3_GPIO (0x0000) ++#define MCF_GPIO_PAR_PCI_REQ2_REQ2 (0x0010) ++#define MCF_GPIO_PAR_PCI_REQ2_GPIO (0x0000) ++#define MCF_GPIO_PAR_PCI_REQ1_REQ1 (0x0040) ++#define MCF_GPIO_PAR_PCI_REQ1_GPIO (0x0000) ++#define MCF_GPIO_PAR_PCI_REQ0_REQ0 (0x0001) ++#define MCF_GPIO_PAR_PCI_REQ0_GPIO (0x0000) ++ ++/* Bit definitions and macros for MSCR_SDRAM */ ++#define MCF_GPIO_MSCR_SDRAM_SDCTL(x) (((x)&0x03)) ++#define MCF_GPIO_MSCR_SDRAM_SDCLK(x) (((x)&0x03)<<2) ++#define MCF_GPIO_MSCR_SDRAM_SDDQS(x) (((x)&0x03)<<4) ++#define MCF_GPIO_MSCR_SDRAM_SDDATA(x) (((x)&0x03)<<6) ++#define MCF_GPIO_MSCR_SDRAM_SDDATA_MASK (0x3F) ++#define MCF_GPIO_MSCR_SDRAM_SDDATA_DDR1 (0xC0) ++#define MCF_GPIO_MSCR_SDRAM_SDDATA_DDR2 (0x80) ++#define MCF_GPIO_MSCR_SDRAM_SDDATA_FS_LPDDR (0x40) ++#define MCF_GPIO_MSCR_SDRAM_SDDATA_HS_LPDDR (0x00) ++#define MCF_GPIO_MSCR_SDRAM_SDDQS_MASK (0xCF) ++#define MCF_GPIO_MSCR_SDRAM_SDDQS_DDR1 (0x30) ++#define MCF_GPIO_MSCR_SDRAM_SDDQS_DDR2 (0x20) ++#define MCF_GPIO_MSCR_SDRAM_SDDQS_FS_LPDDR (0x10) ++#define MCF_GPIO_MSCR_SDRAM_SDDQS_HS_LPDDR (0x00) ++#define MCF_GPIO_MSCR_SDRAM_SDCLK_MASK (0xF3) ++#define MCF_GPIO_MSCR_SDRAM_SDCLK_DDR1 (0x0C) ++#define MCF_GPIO_MSCR_SDRAM_SDCLK_DDR2 (0x08) ++#define MCF_GPIO_MSCR_SDRAM_SDCLK_FS_LPDDR (0x04) ++#define MCF_GPIO_MSCR_SDRAM_SDCLK_HS_LPDDR (0x00) ++#define MCF_GPIO_MSCR_SDRAM_SDCTL_MASK (0xFC) ++#define MCF_GPIO_MSCR_SDRAM_SDCTL_DDR1 (0x03) ++#define MCF_GPIO_MSCR_SDRAM_SDCTL_DDR2 (0x02) ++#define MCF_GPIO_MSCR_SDRAM_SDCTL_FS_LPDDR (0x01) ++#define MCF_GPIO_MSCR_SDRAM_SDCTL_HS_LPDDR (0x00) ++ ++/* Bit definitions and macros for MSCR_PCI */ ++#define MCF_GPIO_MSCR_PCI_PCI (0x01) ++#define MCF_GPIO_MSCR_PCI_PCI_HI_66MHZ (0x01) ++#define MCF_GPIO_MSCR_PCI_PCI_LO_33MHZ (0x00) ++ ++/* Bit definitions and macros for DSCR_I2C */ ++#define MCF_GPIO_DSCR_I2C_I2C(x) (((x)&0x03)) ++#define MCF_GPIO_DSCR_I2C_I2C_LOAD_50PF (0x03) ++#define MCF_GPIO_DSCR_I2C_I2C_LOAD_30PF (0x02) ++#define MCF_GPIO_DSCR_I2C_I2C_LOAD_20PF (0x01) ++#define MCF_GPIO_DSCR_I2C_I2C_LOAD_10PF (0x00) ++ ++/* Bit definitions and macros for DSCR_FLEXBUS */ ++#define MCF_GPIO_DSCR_FLEXBUS_FBADL(x) (((x)&0x03)) ++#define MCF_GPIO_DSCR_FLEXBUS_FBADH(x) (((x)&0x03)<<2) ++#define MCF_GPIO_DSCR_FLEXBUS_FBCTL(x) (((x)&0x03)<<4) ++#define MCF_GPIO_DSCR_FLEXBUS_FBCLK(x) (((x)&0x03)<<6) ++#define MCF_GPIO_DSCR_FLEXBUS_FBCLK_LOAD_50PF (0xC0) ++#define MCF_GPIO_DSCR_FLEXBUS_FBCLK_LOAD_30P (0x80) ++#define MCF_GPIO_DSCR_FLEXBUS_FBCLK_LOAD_20PF (0x40) ++#define MCF_GPIO_DSCR_FLEXBUS_FBCLK_LOAD_10PF (0x00) ++#define MCF_GPIO_DSCR_FLEXBUS_FBCTL_LOAD_50PF (0x30) ++#define MCF_GPIO_DSCR_FLEXBUS_FBCTL_LOAD_30PF (0x20) ++#define MCF_GPIO_DSCR_FLEXBUS_FBCTL_LOAD_20PF (0x10) ++#define MCF_GPIO_DSCR_FLEXBUS_FBCTL_LOAD_10PF (0x00) ++#define MCF_GPIO_DSCR_FLEXBUS_FBADH_LOAD_50PF (0x0C) ++#define MCF_GPIO_DSCR_FLEXBUS_FBADH_LOAD_30PF (0x08) ++#define MCF_GPIO_DSCR_FLEXBUS_FBADH_LOAD_20PF (0x04) ++#define MCF_GPIO_DSCR_FLEXBUS_FBADH_LOAD_10PF (0x00) ++#define MCF_GPIO_DSCR_FLEXBUS_FBADL_LOAD_50PF (0x03) ++#define MCF_GPIO_DSCR_FLEXBUS_FBADL_LOAD_30PF (0x02) ++#define MCF_GPIO_DSCR_FLEXBUS_FBADL_LOAD_20PF (0x01) ++#define MCF_GPIO_DSCR_FLEXBUS_FBADL_LOAD_10PF (0x00) ++ ++/* Bit definitions and macros for DSCR_FEC */ ++#define MCF_GPIO_DSCR_FEC_FEC0(x) (((x)&0x03)) ++#define MCF_GPIO_DSCR_FEC_FEC1(x) (((x)&0x03)<<2) ++#define MCF_GPIO_DSCR_FEC_FEC1_LOAD_50PF (0x0C) ++#define MCF_GPIO_DSCR_FEC_FEC1_LOAD_30PF (0x08) ++#define MCF_GPIO_DSCR_FEC_FEC1_LOAD_20PF (0x04) ++#define MCF_GPIO_DSCR_FEC_FEC1_LOAD_10PF (0x00) ++#define MCF_GPIO_DSCR_FEC_FEC0_LOAD_50PF (0x03) ++#define MCF_GPIO_DSCR_FEC_FEC0_LOAD_30PF (0x02) ++#define MCF_GPIO_DSCR_FEC_FEC0_LOAD_20PF (0x01) ++#define MCF_GPIO_DSCR_FEC_FEC0_LOAD_10PF (0x00) ++ ++/* Bit definitions and macros for DSCR_UART */ ++#define MCF_GPIO_DSCR_UART_UART0(x) (((x)&0x03)) ++#define MCF_GPIO_DSCR_UART_UART1(x) (((x)&0x03)<<2) ++#define MCF_GPIO_DSCR_UART_UART1_LOAD_50PF (0x0C) ++#define MCF_GPIO_DSCR_UART_UART1_LOAD_30PF (0x08) ++#define MCF_GPIO_DSCR_UART_UART1_LOAD_20PF (0x04) ++#define MCF_GPIO_DSCR_UART_UART1_LOAD_10PF (0x00) ++#define MCF_GPIO_DSCR_UART_UART0_LOAD_50PF (0x03) ++#define MCF_GPIO_DSCR_UART_UART0_LOAD_30PF (0x02) ++#define MCF_GPIO_DSCR_UART_UART0_LOAD_20PF (0x01) ++#define MCF_GPIO_DSCR_UART_UART0_LOAD_10PF (0x00) ++ ++/* Bit definitions and macros for DSCR_DSPI */ ++#define MCF_GPIO_DSCR_DSPI_DSPI(x) (((x)&0x03)) ++#define MCF_GPIO_DSCR_DSPI_DSPI_LOAD_50PF (0x03) ++#define MCF_GPIO_DSCR_DSPI_DSPI_LOAD_30PF (0x02) ++#define MCF_GPIO_DSCR_DSPI_DSPI_LOAD_20PF (0x01) ++#define MCF_GPIO_DSCR_DSPI_DSPI_LOAD_10PF (0x00) ++ ++/* Bit definitions and macros for DSCR_TIMER */ ++#define MCF_GPIO_DSCR_TIMER_TIMER(x) (((x)&0x03)) ++#define MCF_GPIO_DSCR_TIMER_TIMER_LOAD_50PF (0x03) ++#define MCF_GPIO_DSCR_TIMER_TIMER_LOAD_30PF (0x02) ++#define MCF_GPIO_DSCR_TIMER_TIMER_LOAD_20PF (0x01) ++#define MCF_GPIO_DSCR_TIMER_TIMER_LOAD_10PF (0x00) ++ ++/* Bit definitions and macros for DSCR_SSI */ ++#define MCF_GPIO_DSCR_SSI_SSI(x) (((x)&0x03)) ++#define MCF_GPIO_DSCR_SSI_SSI_LOAD_50PF (0x03) ++#define MCF_GPIO_DSCR_SSI_SSI_LOAD_30PF (0x02) ++#define MCF_GPIO_DSCR_SSI_SSI_LOAD_20PF (0x01) ++#define MCF_GPIO_DSCR_SSI_SSI_LOAD_10PF (0x00) ++ ++/* Bit definitions and macros for DSCR_DMA */ ++#define MCF_GPIO_DSCR_DMA_DMA(x) (((x)&0x03)) ++#define MCF_GPIO_DSCR_DMA_DMA_LOAD_50PF (0x03) ++#define MCF_GPIO_DSCR_DMA_DMA_LOAD_30PF (0x02) ++#define MCF_GPIO_DSCR_DMA_DMA_LOAD_20PF (0x01) ++#define MCF_GPIO_DSCR_DMA_DMA_LOAD_10PF (0x00) ++ ++/* Bit definitions and macros for DSCR_DEBUG */ ++#define MCF_GPIO_DSCR_DEBUG_DEBUG(x) (((x)&0x03)) ++#define MCF_GPIO_DSCR_DEBUG_DEBUG_LOAD_50PF (0x03) ++#define MCF_GPIO_DSCR_DEBUG_DEBUG_LOAD_30PF (0x02) ++#define MCF_GPIO_DSCR_DEBUG_DEBUG_LOAD_20PF (0x01) ++#define MCF_GPIO_DSCR_DEBUG_DEBUG_LOAD_10PF (0x00) ++ ++/* Bit definitions and macros for DSCR_RESET */ ++#define MCF_GPIO_DSCR_RESET_RESET(x) (((x)&0x03)) ++#define MCF_GPIO_DSCR_RESET_RESET_LOAD_50PF (0x03) ++#define MCF_GPIO_DSCR_RESET_RESET_LOAD_30PF (0x02) ++#define MCF_GPIO_DSCR_RESET_RESET_LOAD_20PF (0x01) ++#define MCF_GPIO_DSCR_RESET_RESET_LOAD_10PF (0x00) ++ ++/* Bit definitions and macros for DSCR_IRQ */ ++#define MCF_GPIO_DSCR_IRQ_IRQ(x) (((x)&0x03)) ++#define MCF_GPIO_DSCR_IRQ_IRQ_LOAD_50PF (0x03) ++#define MCF_GPIO_DSCR_IRQ_IRQ_LOAD_30PF (0x02) ++#define MCF_GPIO_DSCR_IRQ_IRQ_LOAD_20PF (0x01) ++#define MCF_GPIO_DSCR_IRQ_IRQ_LOAD_10PF (0x00) ++ ++/* Bit definitions and macros for DSCR_USB */ ++#define MCF_GPIO_DSCR_USB_USB(x) (((x)&0x03)) ++#define MCF_GPIO_DSCR_USB_USB_LOAD_50PF (0x03) ++#define MCF_GPIO_DSCR_USB_USB_LOAD_30PF (0x02) ++#define MCF_GPIO_DSCR_USB_USB_LOAD_20PF (0x01) ++#define MCF_GPIO_DSCR_USB_USB_LOAD_10PF (0x00) ++ ++/* Bit definitions and macros for DSCR_ATA */ ++#define MCF_GPIO_DSCR_ATA_ATA(x) (((x)&0x03)) ++#define MCF_GPIO_DSCR_ATA_ATA_LOAD_50PF (0x03) ++#define MCF_GPIO_DSCR_ATA_ATA_LOAD_30PF (0x02) ++#define MCF_GPIO_DSCR_ATA_ATA_LOAD_20PF (0x01) ++#define MCF_GPIO_DSCR_ATA_ATA_LOAD_10PF (0x00) ++ ++/********************************************************************/ ++ ++#endif /* __MCF5445X_GPIO_H__ */ +--- /dev/null ++++ b/include/asm-m68k/mcf5445x_i2c.h +@@ -0,0 +1,39 @@ ++/* ++ * Matt Waddel Matt.Waddel@freescale.com ++ * ++ * Copyright Freescale Semiconductor, Inc. 2007 ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ */ ++ ++#ifndef __MCF5445X_I2C_H__ ++#define __MCF5445X_I2C_H__ ++ ++/********************************************************************* ++* ++* I2C Module (I2C) ++* ++*********************************************************************/ ++ ++/* Register read/write macros */ ++#define MCF_I2C_I2ADR (volatile u8 *)(0xFC058000) ++#define MCF_I2C_I2FDR (volatile u8 *)(0xFC058004) ++#define MCF_I2C_I2CR (volatile u8 *)(0xFC058008) ++#define MCF_I2C_I2SR (volatile u8 *)(0xFC05800C) ++#define MCF_I2C_I2DR (volatile u8 *)(0xFC058010) ++ ++/* Bit definitions and macros for I2AR */ ++#define MCF_I2C_I2AR_ADR(x) (((x)&0x7F)<<1) ++ ++/* Bit definitions and macros for I2FDR */ ++#define MCF_I2C_I2FDR_IC(x) (((x)&0x3F)) ++ ++/* Bit definitions and macros for I2DR */ ++#define MCF_I2C_I2DR_DATA(x) (x) ++ ++/********************************************************************/ ++ ++#endif /* __MCF5445X_I2C_H__ */ +--- /dev/null ++++ b/include/asm-m68k/mcf5445x_intc.h +@@ -0,0 +1,724 @@ ++/* ++ * Matt Waddel Matt.Waddel@freescale.com ++ * ++ * Copyright Freescale Semiconductor, Inc. 2007 ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ */ ++ ++#ifndef __MCF5445X_INTC_H__ ++#define __MCF5445X_INTC_H__ ++ ++/********************************************************************* ++* ++* Interrupt Controller (INTC) ++* ++*********************************************************************/ ++ ++/* Register read/write macros */ ++#define MCF_INTC0_IPRH MCF_REG32(0xFC048000) ++#define MCF_INTC0_IPRL MCF_REG32(0xFC048004) ++#define MCF_INTC0_IMRH MCF_REG32(0xFC048008) ++#define MCF_INTC0_IMRL MCF_REG32(0xFC04800C) ++#define MCF_INTC0_INTFRCH MCF_REG32(0xFC048010) ++#define MCF_INTC0_INTFRCL MCF_REG32(0xFC048014) ++#define MCF_INTC0_ICONFIG MCF_REG16(0xFC04801A) ++#define MCF_INTC0_SIMR MCF_REG08(0xFC04801C) ++#define MCF_INTC0_CIMR MCF_REG08(0xFC04801D) ++#define MCF_INTC0_CLMASK MCF_REG08(0xFC04801E) ++#define MCF_INTC0_SLMASK MCF_REG08(0xFC04801F) ++#define MCF_INTC0_ICR1 MCF_REG08(0xFC048041) ++#define MCF_INTC0_ICR2 MCF_REG08(0xFC048042) ++#define MCF_INTC0_ICR3 MCF_REG08(0xFC048043) ++#define MCF_INTC0_ICR4 MCF_REG08(0xFC048044) ++#define MCF_INTC0_ICR5 MCF_REG08(0xFC048045) ++#define MCF_INTC0_ICR6 MCF_REG08(0xFC048046) ++#define MCF_INTC0_ICR7 MCF_REG08(0xFC048047) ++#define MCF_INTC0_ICR8 MCF_REG08(0xFC048048) ++#define MCF_INTC0_ICR9 MCF_REG08(0xFC048049) ++#define MCF_INTC0_ICR10 MCF_REG08(0xFC04804A) ++#define MCF_INTC0_ICR11 MCF_REG08(0xFC04804B) ++#define MCF_INTC0_ICR12 MCF_REG08(0xFC04804C) ++#define MCF_INTC0_ICR13 MCF_REG08(0xFC04804D) ++#define MCF_INTC0_ICR14 MCF_REG08(0xFC04804E) ++#define MCF_INTC0_ICR15 MCF_REG08(0xFC04804F) ++#define MCF_INTC0_ICR16 MCF_REG08(0xFC048050) ++#define MCF_INTC0_ICR17 MCF_REG08(0xFC048051) ++#define MCF_INTC0_ICR18 MCF_REG08(0xFC048052) ++#define MCF_INTC0_ICR19 MCF_REG08(0xFC048053) ++#define MCF_INTC0_ICR20 MCF_REG08(0xFC048054) ++#define MCF_INTC0_ICR21 MCF_REG08(0xFC048055) ++#define MCF_INTC0_ICR22 MCF_REG08(0xFC048056) ++#define MCF_INTC0_ICR23 MCF_REG08(0xFC048057) ++#define MCF_INTC0_ICR24 MCF_REG08(0xFC048058) ++#define MCF_INTC0_ICR25 MCF_REG08(0xFC048059) ++#define MCF_INTC0_ICR26 MCF_REG08(0xFC04805A) ++#define MCF_INTC0_ICR27 MCF_REG08(0xFC04805B) ++#define MCF_INTC0_ICR28 MCF_REG08(0xFC04805C) ++#define MCF_INTC0_ICR29 MCF_REG08(0xFC04805D) ++#define MCF_INTC0_ICR30 MCF_REG08(0xFC04805E) ++#define MCF_INTC0_ICR31 MCF_REG08(0xFC04805F) ++#define MCF_INTC0_ICR32 MCF_REG08(0xFC048060) ++#define MCF_INTC0_ICR33 MCF_REG08(0xFC048061) ++#define MCF_INTC0_ICR34 MCF_REG08(0xFC048062) ++#define MCF_INTC0_ICR35 MCF_REG08(0xFC048063) ++#define MCF_INTC0_ICR36 MCF_REG08(0xFC048064) ++#define MCF_INTC0_ICR37 MCF_REG08(0xFC048065) ++#define MCF_INTC0_ICR38 MCF_REG08(0xFC048066) ++#define MCF_INTC0_ICR39 MCF_REG08(0xFC048067) ++#define MCF_INTC0_ICR40 MCF_REG08(0xFC048068) ++#define MCF_INTC0_ICR41 MCF_REG08(0xFC048069) ++#define MCF_INTC0_ICR42 MCF_REG08(0xFC04806A) ++#define MCF_INTC0_ICR43 MCF_REG08(0xFC04806B) ++#define MCF_INTC0_ICR44 MCF_REG08(0xFC04806C) ++#define MCF_INTC0_ICR45 MCF_REG08(0xFC04806D) ++#define MCF_INTC0_ICR46 MCF_REG08(0xFC04806E) ++#define MCF_INTC0_ICR47 MCF_REG08(0xFC04806F) ++#define MCF_INTC0_ICR48 MCF_REG08(0xFC048070) ++#define MCF_INTC0_ICR49 MCF_REG08(0xFC048071) ++#define MCF_INTC0_ICR50 MCF_REG08(0xFC048072) ++#define MCF_INTC0_ICR51 MCF_REG08(0xFC048073) ++#define MCF_INTC0_ICR52 MCF_REG08(0xFC048074) ++#define MCF_INTC0_ICR53 MCF_REG08(0xFC048075) ++#define MCF_INTC0_ICR54 MCF_REG08(0xFC048076) ++#define MCF_INTC0_ICR55 MCF_REG08(0xFC048077) ++#define MCF_INTC0_ICR56 MCF_REG08(0xFC048078) ++#define MCF_INTC0_ICR57 MCF_REG08(0xFC048079) ++#define MCF_INTC0_ICR58 MCF_REG08(0xFC04807A) ++#define MCF_INTC0_ICR59 MCF_REG08(0xFC04807B) ++#define MCF_INTC0_ICR60 MCF_REG08(0xFC04807C) ++#define MCF_INTC0_ICR61 MCF_REG08(0xFC04807D) ++#define MCF_INTC0_ICR62 MCF_REG08(0xFC04807E) ++#define MCF_INTC0_ICR63 MCF_REG08(0xFC04807F) ++#define MCF_INTC0_SWIACK MCF_REG08(0xFC0480E0) ++#define MCF_INTC0_L1IACK MCF_REG08(0xFC0480E4) ++#define MCF_INTC0_L2IACK MCF_REG08(0xFC0480E8) ++#define MCF_INTC0_L3IACK MCF_REG08(0xFC0480EC) ++#define MCF_INTC0_L4IACK MCF_REG08(0xFC0480F0) ++#define MCF_INTC0_L5IACK MCF_REG08(0xFC0480F4) ++#define MCF_INTC0_L6IACK MCF_REG08(0xFC0480F8) ++#define MCF_INTC0_L7IACK MCF_REG08(0xFC0480FC) ++#define MCF_INTC1_IPRH MCF_REG32(0xFC04C000) ++#define MCF_INTC1_IPRL MCF_REG32(0xFC04C004) ++#define MCF_INTC1_IMRH MCF_REG32(0xFC04C008) ++#define MCF_INTC1_IMRL MCF_REG32(0xFC04C00C) ++#define MCF_INTC1_INTFRCH MCF_REG32(0xFC04C010) ++#define MCF_INTC1_INTFRCL MCF_REG32(0xFC04C014) ++#define MCF_INTC1_ICONFIG MCF_REG16(0xFC04C01A) ++#define MCF_INTC1_SIMR MCF_REG08(0xFC04C01C) ++#define MCF_INTC1_CIMR MCF_REG08(0xFC04C01D) ++#define MCF_INTC1_CLMASK MCF_REG08(0xFC04C01E) ++#define MCF_INTC1_SLMASK MCF_REG08(0xFC04C01F) ++#define MCF_INTC1_ICR1 MCF_REG08(0xFC04C041) ++#define MCF_INTC1_ICR2 MCF_REG08(0xFC04C042) ++#define MCF_INTC1_ICR3 MCF_REG08(0xFC04C043) ++#define MCF_INTC1_ICR4 MCF_REG08(0xFC04C044) ++#define MCF_INTC1_ICR5 MCF_REG08(0xFC04C045) ++#define MCF_INTC1_ICR6 MCF_REG08(0xFC04C046) ++#define MCF_INTC1_ICR7 MCF_REG08(0xFC04C047) ++#define MCF_INTC1_ICR8 MCF_REG08(0xFC04C048) ++#define MCF_INTC1_ICR9 MCF_REG08(0xFC04C049) ++#define MCF_INTC1_ICR10 MCF_REG08(0xFC04C04A) ++#define MCF_INTC1_ICR11 MCF_REG08(0xFC04C04B) ++#define MCF_INTC1_ICR12 MCF_REG08(0xFC04C04C) ++#define MCF_INTC1_ICR13 MCF_REG08(0xFC04C04D) ++#define MCF_INTC1_ICR14 MCF_REG08(0xFC04C04E) ++#define MCF_INTC1_ICR15 MCF_REG08(0xFC04C04F) ++#define MCF_INTC1_ICR16 MCF_REG08(0xFC04C050) ++#define MCF_INTC1_ICR17 MCF_REG08(0xFC04C051) ++#define MCF_INTC1_ICR18 MCF_REG08(0xFC04C052) ++#define MCF_INTC1_ICR19 MCF_REG08(0xFC04C053) ++#define MCF_INTC1_ICR20 MCF_REG08(0xFC04C054) ++#define MCF_INTC1_ICR21 MCF_REG08(0xFC04C055) ++#define MCF_INTC1_ICR22 MCF_REG08(0xFC04C056) ++#define MCF_INTC1_ICR23 MCF_REG08(0xFC04C057) ++#define MCF_INTC1_ICR24 MCF_REG08(0xFC04C058) ++#define MCF_INTC1_ICR25 MCF_REG08(0xFC04C059) ++#define MCF_INTC1_ICR26 MCF_REG08(0xFC04C05A) ++#define MCF_INTC1_ICR27 MCF_REG08(0xFC04C05B) ++#define MCF_INTC1_ICR28 MCF_REG08(0xFC04C05C) ++#define MCF_INTC1_ICR29 MCF_REG08(0xFC04C05D) ++#define MCF_INTC1_ICR30 MCF_REG08(0xFC04C05E) ++#define MCF_INTC1_ICR31 MCF_REG08(0xFC04C05F) ++#define MCF_INTC1_ICR32 MCF_REG08(0xFC04C060) ++#define MCF_INTC1_ICR33 MCF_REG08(0xFC04C061) ++#define MCF_INTC1_ICR34 MCF_REG08(0xFC04C062) ++#define MCF_INTC1_ICR35 MCF_REG08(0xFC04C063) ++#define MCF_INTC1_ICR36 MCF_REG08(0xFC04C064) ++#define MCF_INTC1_ICR37 MCF_REG08(0xFC04C065) ++#define MCF_INTC1_ICR38 MCF_REG08(0xFC04C066) ++#define MCF_INTC1_ICR39 MCF_REG08(0xFC04C067) ++#define MCF_INTC1_ICR40 MCF_REG08(0xFC04C068) ++#define MCF_INTC1_ICR41 MCF_REG08(0xFC04C069) ++#define MCF_INTC1_ICR42 MCF_REG08(0xFC04C06A) ++#define MCF_INTC1_ICR43 MCF_REG08(0xFC04C06B) ++#define MCF_INTC1_ICR44 MCF_REG08(0xFC04C06C) ++#define MCF_INTC1_ICR45 MCF_REG08(0xFC04C06D) ++#define MCF_INTC1_ICR46 MCF_REG08(0xFC04C06E) ++#define MCF_INTC1_ICR47 MCF_REG08(0xFC04C06F) ++#define MCF_INTC1_ICR48 MCF_REG08(0xFC04C070) ++#define MCF_INTC1_ICR49 MCF_REG08(0xFC04C071) ++#define MCF_INTC1_ICR50 MCF_REG08(0xFC04C072) ++#define MCF_INTC1_ICR51 MCF_REG08(0xFC04C073) ++#define MCF_INTC1_ICR52 MCF_REG08(0xFC04C074) ++#define MCF_INTC1_ICR53 MCF_REG08(0xFC04C075) ++#define MCF_INTC1_ICR54 MCF_REG08(0xFC04C076) ++#define MCF_INTC1_ICR55 MCF_REG08(0xFC04C077) ++#define MCF_INTC1_ICR56 MCF_REG08(0xFC04C078) ++#define MCF_INTC1_ICR57 MCF_REG08(0xFC04C079) ++#define MCF_INTC1_ICR58 MCF_REG08(0xFC04C07A) ++#define MCF_INTC1_ICR59 MCF_REG08(0xFC04C07B) ++#define MCF_INTC1_ICR60 MCF_REG08(0xFC04C07C) ++#define MCF_INTC1_ICR61 MCF_REG08(0xFC04C07D) ++#define MCF_INTC1_ICR62 MCF_REG08(0xFC04C07E) ++#define MCF_INTC1_ICR63 MCF_REG08(0xFC04C07F) ++#define MCF_INTC1_SWIACK MCF_REG08(0xFC04C0E0) ++#define MCF_INTC1_L1IACK MCF_REG08(0xFC04C0E4) ++#define MCF_INTC1_L2IACK MCF_REG08(0xFC04C0E8) ++#define MCF_INTC1_L3IACK MCF_REG08(0xFC04C0EC) ++#define MCF_INTC1_L4IACK MCF_REG08(0xFC04C0F0) ++#define MCF_INTC1_L5IACK MCF_REG08(0xFC04C0F4) ++#define MCF_INTC1_L6IACK MCF_REG08(0xFC04C0F8 ++#define MCF_INTC1_L7IACK MCF_REG08(0xFC04C0FC) ++ ++/* Parameterized register read/write macros for multiple registers */ ++#define MCF_INTC0_ICR(x) MCF_REG08(0xFC048041+((x-1)*0x001)) ++#define MCF_INTC0_LIACK(x) MCF_REG08(0xFC0480E4+((x-1)*0x004)) ++#define MCF_INTC1_ICR(x) MCF_REG08(0xFC04C041+((x-1)*0x001)) ++#define MCF_INTC1_LIACK(x) MCF_REG08(0xFC04C0E4+((x-1)*0x004)) ++ ++/* Parameterized register read/write macros for multiple modules */ ++#define MCF_INTC_IPRH(x) MCF_REG32(0xFC048000+((x)*0x4000)) ++#define MCF_INTC_IPRL(x) MCF_REG32(0xFC048004+((x)*0x4000)) ++#define MCF_INTC_IMRH(x) MCF_REG32(0xFC048008+((x)*0x4000)) ++#define MCF_INTC_IMRL(x) MCF_REG32(0xFC04800C+((x)*0x4000)) ++#define MCF_INTC_INTFRCH(x) MCF_REG32(0xFC048010+((x)*0x4000)) ++#define MCF_INTC_INTFRCL(x) MCF_REG32(0xFC048014+((x)*0x4000)) ++#define MCF_INTC_ICONFIG(x) MCF_REG16(0xFC04801A+((x)*0x4000)) ++#define MCF_INTC_SIMR(x) MCF_REG08(0xFC04801C+((x)*0x4000)) ++#define MCF_INTC_CIMR(x) MCF_REG08(0xFC04801D+((x)*0x4000)) ++#define MCF_INTC_CLMASK(x) MCF_REG08(0xFC04801E+((x)*0x4000)) ++#define MCF_INTC_SLMASK(x) MCF_REG08(0xFC04801F+((x)*0x4000)) ++#define MCF_INTC_ICR1(x) MCF_REG08(0xFC048041+((x)*0x4000)) ++#define MCF_INTC_ICR2(x) MCF_REG08(0xFC048042+((x)*0x4000)) ++#define MCF_INTC_ICR3(x) MCF_REG08(0xFC048043+((x)*0x4000)) ++#define MCF_INTC_ICR4(x) MCF_REG08(0xFC048044+((x)*0x4000)) ++#define MCF_INTC_ICR5(x) MCF_REG08(0xFC048045+((x)*0x4000)) ++#define MCF_INTC_ICR6(x) MCF_REG08(0xFC048046+((x)*0x4000)) ++#define MCF_INTC_ICR7(x) MCF_REG08(0xFC048047+((x)*0x4000)) ++#define MCF_INTC_ICR8(x) MCF_REG08(0xFC048048+((x)*0x4000)) ++#define MCF_INTC_ICR9(x) MCF_REG08(0xFC048049+((x)*0x4000)) ++#define MCF_INTC_ICR10(x) MCF_REG08(0xFC04804A+((x)*0x4000)) ++#define MCF_INTC_ICR11(x) MCF_REG08(0xFC04804B+((x)*0x4000)) ++#define MCF_INTC_ICR12(x) MCF_REG08(0xFC04804C+((x)*0x4000)) ++#define MCF_INTC_ICR13(x) MCF_REG08(0xFC04804D+((x)*0x4000)) ++#define MCF_INTC_ICR14(x) MCF_REG08(0xFC04804E+((x)*0x4000)) ++#define MCF_INTC_ICR15(x) MCF_REG08(0xFC04804F+((x)*0x4000)) ++#define MCF_INTC_ICR16(x) MCF_REG08(0xFC048050+((x)*0x4000)) ++#define MCF_INTC_ICR17(x) MCF_REG08(0xFC048051+((x)*0x4000)) ++#define MCF_INTC_ICR18(x) MCF_REG08(0xFC048052+((x)*0x4000)) ++#define MCF_INTC_ICR19(x) MCF_REG08(0xFC048053+((x)*0x4000)) ++#define MCF_INTC_ICR20(x) MCF_REG08(0xFC048054+((x)*0x4000)) ++#define MCF_INTC_ICR21(x) MCF_REG08(0xFC048055+((x)*0x4000)) ++#define MCF_INTC_ICR22(x) MCF_REG08(0xFC048056+((x)*0x4000)) ++#define MCF_INTC_ICR23(x) MCF_REG08(0xFC048057+((x)*0x4000)) ++#define MCF_INTC_ICR24(x) MCF_REG08(0xFC048058+((x)*0x4000)) ++#define MCF_INTC_ICR25(x) MCF_REG08(0xFC048059+((x)*0x4000)) ++#define MCF_INTC_ICR26(x) MCF_REG08(0xFC04805A+((x)*0x4000)) ++#define MCF_INTC_ICR27(x) MCF_REG08(0xFC04805B+((x)*0x4000)) ++#define MCF_INTC_ICR28(x) MCF_REG08(0xFC04805C+((x)*0x4000)) ++#define MCF_INTC_ICR29(x) MCF_REG08(0xFC04805D+((x)*0x4000)) ++#define MCF_INTC_ICR30(x) MCF_REG08(0xFC04805E+((x)*0x4000)) ++#define MCF_INTC_ICR31(x) MCF_REG08(0xFC04805F+((x)*0x4000)) ++#define MCF_INTC_ICR32(x) MCF_REG08(0xFC048060+((x)*0x4000)) ++#define MCF_INTC_ICR33(x) MCF_REG08(0xFC048061+((x)*0x4000)) ++#define MCF_INTC_ICR34(x) MCF_REG08(0xFC048062+((x)*0x4000)) ++#define MCF_INTC_ICR35(x) MCF_REG08(0xFC048063+((x)*0x4000)) ++#define MCF_INTC_ICR36(x) MCF_REG08(0xFC048064+((x)*0x4000)) ++#define MCF_INTC_ICR37(x) MCF_REG08(0xFC048065+((x)*0x4000)) ++#define MCF_INTC_ICR38(x) MCF_REG08(0xFC048066+((x)*0x4000)) ++#define MCF_INTC_ICR39(x) MCF_REG08(0xFC048067+((x)*0x4000)) ++#define MCF_INTC_ICR40(x) MCF_REG08(0xFC048068+((x)*0x4000)) ++#define MCF_INTC_ICR41(x) MCF_REG08(0xFC048069+((x)*0x4000)) ++#define MCF_INTC_ICR42(x) MCF_REG08(0xFC04806A+((x)*0x4000)) ++#define MCF_INTC_ICR43(x) MCF_REG08(0xFC04806B+((x)*0x4000)) ++#define MCF_INTC_ICR44(x) MCF_REG08(0xFC04806C+((x)*0x4000)) ++#define MCF_INTC_ICR45(x) MCF_REG08(0xFC04806D+((x)*0x4000)) ++#define MCF_INTC_ICR46(x) MCF_REG08(0xFC04806E+((x)*0x4000)) ++#define MCF_INTC_ICR47(x) MCF_REG08(0xFC04806F+((x)*0x4000)) ++#define MCF_INTC_ICR48(x) MCF_REG08(0xFC048070+((x)*0x4000)) ++#define MCF_INTC_ICR49(x) MCF_REG08(0xFC048071+((x)*0x4000)) ++#define MCF_INTC_ICR50(x) MCF_REG08(0xFC048072+((x)*0x4000)) ++#define MCF_INTC_ICR51(x) MCF_REG08(0xFC048073+((x)*0x4000)) ++#define MCF_INTC_ICR52(x) MCF_REG08(0xFC048074+((x)*0x4000)) ++#define MCF_INTC_ICR53(x) MCF_REG08(0xFC048075+((x)*0x4000)) ++#define MCF_INTC_ICR54(x) MCF_REG08(0xFC048076+((x)*0x4000)) ++#define MCF_INTC_ICR55(x) MCF_REG08(0xFC048077+((x)*0x4000)) ++#define MCF_INTC_ICR56(x) MCF_REG08(0xFC048078+((x)*0x4000)) ++#define MCF_INTC_ICR57(x) MCF_REG08(0xFC048079+((x)*0x4000)) ++#define MCF_INTC_ICR58(x) MCF_REG08(0xFC04807A+((x)*0x4000)) ++#define MCF_INTC_ICR59(x) MCF_REG08(0xFC04807B+((x)*0x4000)) ++#define MCF_INTC_ICR60(x) MCF_REG08(0xFC04807C+((x)*0x4000)) ++#define MCF_INTC_ICR61(x) MCF_REG08(0xFC04807D+((x)*0x4000)) ++#define MCF_INTC_ICR62(x) MCF_REG08(0xFC04807E+((x)*0x4000)) ++#define MCF_INTC_ICR63(x) MCF_REG08(0xFC04807F+((x)*0x4000)) ++#define MCF_INTC_SWIACK(x) MCF_REG08(0xFC0480E0+((x)*0x4000)) ++#define MCF_INTC_L1IACK(x) MCF_REG08(0xFC0480E4+((x)*0x4000)) ++#define MCF_INTC_L2IACK(x) MCF_REG08(0xFC0480E8+((x)*0x4000)) ++#define MCF_INTC_L3IACK(x) MCF_REG08(0xFC0480EC+((x)*0x4000)) ++#define MCF_INTC_L4IACK(x) MCF_REG08(0xFC0480F0+((x)*0x4000)) ++#define MCF_INTC_L5IACK(x) MCF_REG08(0xFC0480F4+((x)*0x4000)) ++#define MCF_INTC_L6IACK(x) MCF_REG08(0xFC0480F8+((x)*0x4000)) ++#define MCF_INTC_L7IACK(x) MCF_REG08(0xFC0480FC+((x)*0x4000)) ++ ++/* Bit definitions and macros for IPRH */ ++#define MCF_INTC_IPRH_INT32 (0x00000001) ++#define MCF_INTC_IPRH_INT33 (0x00000002) ++#define MCF_INTC_IPRH_INT34 (0x00000004) ++#define MCF_INTC_IPRH_INT35 (0x00000008) ++#define MCF_INTC_IPRH_INT36 (0x00000010) ++#define MCF_INTC_IPRH_INT37 (0x00000020) ++#define MCF_INTC_IPRH_INT38 (0x00000040) ++#define MCF_INTC_IPRH_INT39 (0x00000080) ++#define MCF_INTC_IPRH_INT40 (0x00000100) ++#define MCF_INTC_IPRH_INT41 (0x00000200) ++#define MCF_INTC_IPRH_INT42 (0x00000400) ++#define MCF_INTC_IPRH_INT43 (0x00000800) ++#define MCF_INTC_IPRH_INT44 (0x00001000) ++#define MCF_INTC_IPRH_INT45 (0x00002000) ++#define MCF_INTC_IPRH_INT46 (0x00004000) ++#define MCF_INTC_IPRH_INT47 (0x00008000) ++#define MCF_INTC_IPRH_INT48 (0x00010000) ++#define MCF_INTC_IPRH_INT49 (0x00020000) ++#define MCF_INTC_IPRH_INT50 (0x00040000) ++#define MCF_INTC_IPRH_INT51 (0x00080000) ++#define MCF_INTC_IPRH_INT52 (0x00100000) ++#define MCF_INTC_IPRH_INT53 (0x00200000) ++#define MCF_INTC_IPRH_INT54 (0x00400000) ++#define MCF_INTC_IPRH_INT55 (0x00800000) ++#define MCF_INTC_IPRH_INT56 (0x01000000) ++#define MCF_INTC_IPRH_INT57 (0x02000000) ++#define MCF_INTC_IPRH_INT58 (0x04000000) ++#define MCF_INTC_IPRH_INT59 (0x08000000) ++#define MCF_INTC_IPRH_INT60 (0x10000000) ++#define MCF_INTC_IPRH_INT61 (0x20000000) ++#define MCF_INTC_IPRH_INT62 (0x40000000) ++#define MCF_INTC_IPRH_INT63 (0x80000000) ++ ++/* Bit definitions and macros for IPRL */ ++#define MCF_INTC_IPRL_INT0 (0x00000001) ++#define MCF_INTC_IPRL_INT1 (0x00000002) ++#define MCF_INTC_IPRL_INT2 (0x00000004) ++#define MCF_INTC_IPRL_INT3 (0x00000008) ++#define MCF_INTC_IPRL_INT4 (0x00000010) ++#define MCF_INTC_IPRL_INT5 (0x00000020) ++#define MCF_INTC_IPRL_INT6 (0x00000040) ++#define MCF_INTC_IPRL_INT7 (0x00000080) ++#define MCF_INTC_IPRL_INT8 (0x00000100) ++#define MCF_INTC_IPRL_INT9 (0x00000200) ++#define MCF_INTC_IPRL_INT10 (0x00000400) ++#define MCF_INTC_IPRL_INT11 (0x00000800) ++#define MCF_INTC_IPRL_INT12 (0x00001000) ++#define MCF_INTC_IPRL_INT13 (0x00002000) ++#define MCF_INTC_IPRL_INT14 (0x00004000) ++#define MCF_INTC_IPRL_INT15 (0x00008000) ++#define MCF_INTC_IPRL_INT16 (0x00010000) ++#define MCF_INTC_IPRL_INT17 (0x00020000) ++#define MCF_INTC_IPRL_INT18 (0x00040000) ++#define MCF_INTC_IPRL_INT19 (0x00080000) ++#define MCF_INTC_IPRL_INT20 (0x00100000) ++#define MCF_INTC_IPRL_INT21 (0x00200000) ++#define MCF_INTC_IPRL_INT22 (0x00400000) ++#define MCF_INTC_IPRL_INT23 (0x00800000) ++#define MCF_INTC_IPRL_INT24 (0x01000000) ++#define MCF_INTC_IPRL_INT25 (0x02000000) ++#define MCF_INTC_IPRL_INT26 (0x04000000) ++#define MCF_INTC_IPRL_INT27 (0x08000000) ++#define MCF_INTC_IPRL_INT28 (0x10000000) ++#define MCF_INTC_IPRL_INT29 (0x20000000) ++#define MCF_INTC_IPRL_INT30 (0x40000000) ++#define MCF_INTC_IPRL_INT31 (0x80000000) ++ ++/* Bit definitions and macros for IMRH */ ++#define MCF_INTC_IMRH_INT_MASK32 (0x00000001) ++#define MCF_INTC_IMRH_INT_MASK33 (0x00000002) ++#define MCF_INTC_IMRH_INT_MASK34 (0x00000004) ++#define MCF_INTC_IMRH_INT_MASK35 (0x00000008) ++#define MCF_INTC_IMRH_INT_MASK36 (0x00000010) ++#define MCF_INTC_IMRH_INT_MASK37 (0x00000020) ++#define MCF_INTC_IMRH_INT_MASK38 (0x00000040) ++#define MCF_INTC_IMRH_INT_MASK39 (0x00000080) ++#define MCF_INTC_IMRH_INT_MASK40 (0x00000100) ++#define MCF_INTC_IMRH_INT_MASK41 (0x00000200) ++#define MCF_INTC_IMRH_INT_MASK42 (0x00000400) ++#define MCF_INTC_IMRH_INT_MASK43 (0x00000800) ++#define MCF_INTC_IMRH_INT_MASK44 (0x00001000) ++#define MCF_INTC_IMRH_INT_MASK45 (0x00002000) ++#define MCF_INTC_IMRH_INT_MASK46 (0x00004000) ++#define MCF_INTC_IMRH_INT_MASK47 (0x00008000) ++#define MCF_INTC_IMRH_INT_MASK48 (0x00010000) ++#define MCF_INTC_IMRH_INT_MASK49 (0x00020000) ++#define MCF_INTC_IMRH_INT_MASK50 (0x00040000) ++#define MCF_INTC_IMRH_INT_MASK51 (0x00080000) ++#define MCF_INTC_IMRH_INT_MASK52 (0x00100000) ++#define MCF_INTC_IMRH_INT_MASK53 (0x00200000) ++#define MCF_INTC_IMRH_INT_MASK54 (0x00400000) ++#define MCF_INTC_IMRH_INT_MASK55 (0x00800000) ++#define MCF_INTC_IMRH_INT_MASK56 (0x01000000) ++#define MCF_INTC_IMRH_INT_MASK57 (0x02000000) ++#define MCF_INTC_IMRH_INT_MASK58 (0x04000000) ++#define MCF_INTC_IMRH_INT_MASK59 (0x08000000) ++#define MCF_INTC_IMRH_INT_MASK60 (0x10000000) ++#define MCF_INTC_IMRH_INT_MASK61 (0x20000000) ++#define MCF_INTC_IMRH_INT_MASK62 (0x40000000) ++#define MCF_INTC_IMRH_INT_MASK63 (0x80000000) ++ ++/* Bit definitions and macros for IMRL */ ++#define MCF_INTC_IMRL_INT_MASK0 (0x00000001) ++#define MCF_INTC_IMRL_INT_MASK1 (0x00000002) ++#define MCF_INTC_IMRL_INT_MASK2 (0x00000004) ++#define MCF_INTC_IMRL_INT_MASK3 (0x00000008) ++#define MCF_INTC_IMRL_INT_MASK4 (0x00000010) ++#define MCF_INTC_IMRL_INT_MASK5 (0x00000020) ++#define MCF_INTC_IMRL_INT_MASK6 (0x00000040) ++#define MCF_INTC_IMRL_INT_MASK7 (0x00000080) ++#define MCF_INTC_IMRL_INT_MASK8 (0x00000100) ++#define MCF_INTC_IMRL_INT_MASK9 (0x00000200) ++#define MCF_INTC_IMRL_INT_MASK10 (0x00000400) ++#define MCF_INTC_IMRL_INT_MASK11 (0x00000800) ++#define MCF_INTC_IMRL_INT_MASK12 (0x00001000) ++#define MCF_INTC_IMRL_INT_MASK13 (0x00002000) ++#define MCF_INTC_IMRL_INT_MASK14 (0x00004000) ++#define MCF_INTC_IMRL_INT_MASK15 (0x00008000) ++#define MCF_INTC_IMRL_INT_MASK16 (0x00010000) ++#define MCF_INTC_IMRL_INT_MASK17 (0x00020000) ++#define MCF_INTC_IMRL_INT_MASK18 (0x00040000) ++#define MCF_INTC_IMRL_INT_MASK19 (0x00080000) ++#define MCF_INTC_IMRL_INT_MASK20 (0x00100000) ++#define MCF_INTC_IMRL_INT_MASK21 (0x00200000) ++#define MCF_INTC_IMRL_INT_MASK22 (0x00400000) ++#define MCF_INTC_IMRL_INT_MASK23 (0x00800000) ++#define MCF_INTC_IMRL_INT_MASK24 (0x01000000) ++#define MCF_INTC_IMRL_INT_MASK25 (0x02000000) ++#define MCF_INTC_IMRL_INT_MASK26 (0x04000000) ++#define MCF_INTC_IMRL_INT_MASK27 (0x08000000) ++#define MCF_INTC_IMRL_INT_MASK28 (0x10000000) ++#define MCF_INTC_IMRL_INT_MASK29 (0x20000000) ++#define MCF_INTC_IMRL_INT_MASK30 (0x40000000) ++#define MCF_INTC_IMRL_INT_MASK31 (0x80000000) ++ ++/* Bit definitions and macros for INTFRCH */ ++#define MCF_INTC_INTFRCH_INTFRC32 (0x00000001) ++#define MCF_INTC_INTFRCH_INTFRC33 (0x00000002) ++#define MCF_INTC_INTFRCH_INTFRC34 (0x00000004) ++#define MCF_INTC_INTFRCH_INTFRC35 (0x00000008) ++#define MCF_INTC_INTFRCH_INTFRC36 (0x00000010) ++#define MCF_INTC_INTFRCH_INTFRC37 (0x00000020) ++#define MCF_INTC_INTFRCH_INTFRC38 (0x00000040) ++#define MCF_INTC_INTFRCH_INTFRC39 (0x00000080) ++#define MCF_INTC_INTFRCH_INTFRC40 (0x00000100) ++#define MCF_INTC_INTFRCH_INTFRC41 (0x00000200) ++#define MCF_INTC_INTFRCH_INTFRC42 (0x00000400) ++#define MCF_INTC_INTFRCH_INTFRC43 (0x00000800) ++#define MCF_INTC_INTFRCH_INTFRC44 (0x00001000) ++#define MCF_INTC_INTFRCH_INTFRC45 (0x00002000) ++#define MCF_INTC_INTFRCH_INTFRC46 (0x00004000) ++#define MCF_INTC_INTFRCH_INTFRC47 (0x00008000) ++#define MCF_INTC_INTFRCH_INTFRC48 (0x00010000) ++#define MCF_INTC_INTFRCH_INTFRC49 (0x00020000) ++#define MCF_INTC_INTFRCH_INTFRC50 (0x00040000) ++#define MCF_INTC_INTFRCH_INTFRC51 (0x00080000) ++#define MCF_INTC_INTFRCH_INTFRC52 (0x00100000) ++#define MCF_INTC_INTFRCH_INTFRC53 (0x00200000) ++#define MCF_INTC_INTFRCH_INTFRC54 (0x00400000) ++#define MCF_INTC_INTFRCH_INTFRC55 (0x00800000) ++#define MCF_INTC_INTFRCH_INTFRC56 (0x01000000) ++#define MCF_INTC_INTFRCH_INTFRC57 (0x02000000) ++#define MCF_INTC_INTFRCH_INTFRC58 (0x04000000) ++#define MCF_INTC_INTFRCH_INTFRC59 (0x08000000) ++#define MCF_INTC_INTFRCH_INTFRC60 (0x10000000) ++#define MCF_INTC_INTFRCH_INTFRC61 (0x20000000) ++#define MCF_INTC_INTFRCH_INTFRC62 (0x40000000) ++#define MCF_INTC_INTFRCH_INTFRC63 (0x80000000) ++ ++/* Bit definitions and macros for INTFRCL */ ++#define MCF_INTC_INTFRCL_INTFRC0 (0x00000001) ++#define MCF_INTC_INTFRCL_INTFRC1 (0x00000002) ++#define MCF_INTC_INTFRCL_INTFRC2 (0x00000004) ++#define MCF_INTC_INTFRCL_INTFRC3 (0x00000008) ++#define MCF_INTC_INTFRCL_INTFRC4 (0x00000010) ++#define MCF_INTC_INTFRCL_INTFRC5 (0x00000020) ++#define MCF_INTC_INTFRCL_INTFRC6 (0x00000040) ++#define MCF_INTC_INTFRCL_INTFRC7 (0x00000080) ++#define MCF_INTC_INTFRCL_INTFRC8 (0x00000100) ++#define MCF_INTC_INTFRCL_INTFRC9 (0x00000200) ++#define MCF_INTC_INTFRCL_INTFRC10 (0x00000400) ++#define MCF_INTC_INTFRCL_INTFRC11 (0x00000800) ++#define MCF_INTC_INTFRCL_INTFRC12 (0x00001000) ++#define MCF_INTC_INTFRCL_INTFRC13 (0x00002000) ++#define MCF_INTC_INTFRCL_INTFRC14 (0x00004000) ++#define MCF_INTC_INTFRCL_INTFRC15 (0x00008000) ++#define MCF_INTC_INTFRCL_INTFRC16 (0x00010000) ++#define MCF_INTC_INTFRCL_INTFRC17 (0x00020000) ++#define MCF_INTC_INTFRCL_INTFRC18 (0x00040000) ++#define MCF_INTC_INTFRCL_INTFRC19 (0x00080000) ++#define MCF_INTC_INTFRCL_INTFRC20 (0x00100000) ++#define MCF_INTC_INTFRCL_INTFRC21 (0x00200000) ++#define MCF_INTC_INTFRCL_INTFRC22 (0x00400000) ++#define MCF_INTC_INTFRCL_INTFRC23 (0x00800000) ++#define MCF_INTC_INTFRCL_INTFRC24 (0x01000000) ++#define MCF_INTC_INTFRCL_INTFRC25 (0x02000000) ++#define MCF_INTC_INTFRCL_INTFRC26 (0x04000000) ++#define MCF_INTC_INTFRCL_INTFRC27 (0x08000000) ++#define MCF_INTC_INTFRCL_INTFRC28 (0x10000000) ++#define MCF_INTC_INTFRCL_INTFRC29 (0x20000000) ++#define MCF_INTC_INTFRCL_INTFRC30 (0x40000000) ++#define MCF_INTC_INTFRCL_INTFRC31 (0x80000000) ++ ++/* Bit definitions and macros for ICONFIG */ ++#define MCF_INTC_ICONFIG_EMASK (0x0020) ++#define MCF_INTC_ICONFIG_ELVLPRI1 (0x0200) ++#define MCF_INTC_ICONFIG_ELVLPRI2 (0x0400) ++#define MCF_INTC_ICONFIG_ELVLPRI3 (0x0800) ++#define MCF_INTC_ICONFIG_ELVLPRI4 (0x1000) ++#define MCF_INTC_ICONFIG_ELVLPRI5 (0x2000) ++#define MCF_INTC_ICONFIG_ELVLPRI6 (0x4000) ++#define MCF_INTC_ICONFIG_ELVLPRI7 (0x8000) ++ ++/* Bit definitions and macros for SIMR */ ++#define MCF_INTC_SIMR_SIMR(x) (((x)&0x7F)) ++ ++/* Bit definitions and macros for CIMR */ ++#define MCF_INTC_CIMR_CIMR(x) (((x)&0x7F)) ++ ++/* Bit definitions and macros for CLMASK */ ++#define MCF_INTC_CLMASK_CLMASK(x) (((x)&0x0F)) ++ ++/* Bit definitions and macros for SLMASK */ ++#define MCF_INTC_SLMASK_SLMASK(x) (((x)&0x0F)) ++ ++/* Bit definitions and macros for ICR group */ ++#define MCF_INTC_ICR_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR1 */ ++#define MCF_INTC_ICR1_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR2 */ ++#define MCF_INTC_ICR2_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR3 */ ++#define MCF_INTC_ICR3_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR4 */ ++#define MCF_INTC_ICR4_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR5 */ ++#define MCF_INTC_ICR5_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR6 */ ++#define MCF_INTC_ICR6_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR7 */ ++#define MCF_INTC_ICR7_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR8 */ ++#define MCF_INTC_ICR8_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR9 */ ++#define MCF_INTC_ICR9_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR10 */ ++#define MCF_INTC_ICR10_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR11 */ ++#define MCF_INTC_ICR11_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR12 */ ++#define MCF_INTC_ICR12_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR13 */ ++#define MCF_INTC_ICR13_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR14 */ ++#define MCF_INTC_ICR14_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR15 */ ++#define MCF_INTC_ICR15_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR16 */ ++#define MCF_INTC_ICR16_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR17 */ ++#define MCF_INTC_ICR17_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR18 */ ++#define MCF_INTC_ICR18_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR19 */ ++#define MCF_INTC_ICR19_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR20 */ ++#define MCF_INTC_ICR20_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR21 */ ++#define MCF_INTC_ICR21_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR22 */ ++#define MCF_INTC_ICR22_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR23 */ ++#define MCF_INTC_ICR23_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR24 */ ++#define MCF_INTC_ICR24_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR25 */ ++#define MCF_INTC_ICR25_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR26 */ ++#define MCF_INTC_ICR26_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR27 */ ++#define MCF_INTC_ICR27_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR28 */ ++#define MCF_INTC_ICR28_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR29 */ ++#define MCF_INTC_ICR29_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR30 */ ++#define MCF_INTC_ICR30_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR31 */ ++#define MCF_INTC_ICR31_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR32 */ ++#define MCF_INTC_ICR32_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR33 */ ++#define MCF_INTC_ICR33_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR34 */ ++#define MCF_INTC_ICR34_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR35 */ ++#define MCF_INTC_ICR35_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR36 */ ++#define MCF_INTC_ICR36_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR37 */ ++#define MCF_INTC_ICR37_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR38 */ ++#define MCF_INTC_ICR38_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR39 */ ++#define MCF_INTC_ICR39_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR40 */ ++#define MCF_INTC_ICR40_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR41 */ ++#define MCF_INTC_ICR41_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR42 */ ++#define MCF_INTC_ICR42_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR43 */ ++#define MCF_INTC_ICR43_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR44 */ ++#define MCF_INTC_ICR44_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR45 */ ++#define MCF_INTC_ICR45_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR46 */ ++#define MCF_INTC_ICR46_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR47 */ ++#define MCF_INTC_ICR47_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR48 */ ++#define MCF_INTC_ICR48_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR49 */ ++#define MCF_INTC_ICR49_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR50 */ ++#define MCF_INTC_ICR50_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR51 */ ++#define MCF_INTC_ICR51_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR52 */ ++#define MCF_INTC_ICR52_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR53 */ ++#define MCF_INTC_ICR53_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR54 */ ++#define MCF_INTC_ICR54_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR55 */ ++#define MCF_INTC_ICR55_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR56 */ ++#define MCF_INTC_ICR56_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR57 */ ++#define MCF_INTC_ICR57_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR58 */ ++#define MCF_INTC_ICR58_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR59 */ ++#define MCF_INTC_ICR59_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR60 */ ++#define MCF_INTC_ICR60_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR61 */ ++#define MCF_INTC_ICR61_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR62 */ ++#define MCF_INTC_ICR62_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for ICR63 */ ++#define MCF_INTC_ICR63_IL(x) (((x)&0x07)) ++ ++/* Bit definitions and macros for SWIACK */ ++#define MCF_INTC_SWIACK_VECTOR(x) (x) ++ ++/* Bit definitions and macros for LIACK group */ ++#define MCF_INTC_LIACK_VECTOR(x) (x) ++ ++/* Bit definitions and macros for L1IACK */ ++#define MCF_INTC_L1IACK_VECTOR(x) (x) ++ ++/* Bit definitions and macros for L2IACK */ ++#define MCF_INTC_L2IACK_VECTOR(x) (x) ++ ++/* Bit definitions and macros for L3IACK */ ++#define MCF_INTC_L3IACK_VECTOR(x) (x) ++ ++/* Bit definitions and macros for L4IACK */ ++#define MCF_INTC_L4IACK_VECTOR(x) (x) ++ ++/* Bit definitions and macros for L5IACK */ ++#define MCF_INTC_L5IACK_VECTOR(x) (x) ++ ++/* Bit definitions and macros for L6IACK */ ++#define MCF_INTC_L6IACK_VECTOR(x) (x) ++ ++/* Bit definitions and macros for L7IACK */ ++#define MCF_INTC_L7IACK_VECTOR(x) (x) ++ ++/********************************************************************/ ++ ++#endif /* __MCF5445X_INTC_H__ */ +--- /dev/null ++++ b/include/asm-m68k/mcf5445x_pciarb.h +@@ -0,0 +1,40 @@ ++/* ++ * Kurt Mahan kmahan@freescale.com ++ * ++ * Copyright Freescale Semiconductor, Inc. 2007 ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ */ ++ ++#ifndef __MCF5445X_PCIARB_H__ ++#define __MCF5445X_PCIARB_H__ ++ ++/********************************************************************* ++* ++* PCI Arbiter Module (PCIARB) ++* ++*********************************************************************/ ++ ++/* Register read/write macros */ ++#define MCF_PCIARB_PACR MCF_REG32(0xFC0AC000) ++#define MCF_PCIARB_PASR MCF_REG32(0xFC0AC004) ++ ++/* Bit definitions and macros for PACR */ ++#define MCF_PCIARB_PACR_INTMPRI (0x00000001) ++#define MCF_PCIARB_PACR_EXTMPRI(x) (((x)&0x0000001F)<<1) ++#define MCF_PCIARB_PACR_RA (0x00008000) ++#define MCF_PCIARB_PACR_INTMINTEN (0x00010000) ++#define MCF_PCIARB_PACR_EXTMINTEN(x) (((x)&0x0000001F)<<17) ++#define MCF_PCIARB_PACR_PKMD (0x40000000) ++#define MCF_PCIARB_PACR_DS (0x80000000) ++ ++/* Bit definitions and macros for PASR */ ++#define MCF_PCIARB_PASR_ITLMBK (0x00010000) ++#define MCF_PCIARB_PASR_EXTMBK(x) (((x)&0x0000001F)<<17) ++ ++/********************************************************************/ ++ ++#endif /* __MCF5445X_PCIARB_H__ */ +--- /dev/null ++++ b/include/asm-m68k/mcf5445x_pci.h +@@ -0,0 +1,238 @@ ++/* ++ * Kurt Mahan kmahan@freescale.com ++ * ++ * Copyright Freescale Semiconductor, Inc. 2007 ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ */ ++ ++#ifndef __MCF5445X_PCI_H__ ++#define __MCF5445X_PCI_H__ ++ ++/********************************************************************* ++* ++* PCI Bus Controller (PCI) ++* ++*********************************************************************/ ++ ++/* Register read/write macros */ ++#define MCF_PCI_PCIIDR MCF_REG32(0xFC0A8000) ++#define MCF_PCI_PCISCR MCF_REG32(0xFC0A8004) ++#define MCF_PCI_PCICCRIR MCF_REG32(0xFC0A8008) ++#define MCF_PCI_PCICR1 MCF_REG32(0xFC0A800C) ++#define MCF_PCI_PCIBAR0 MCF_REG32(0xFC0A8010) ++#define MCF_PCI_PCIBAR1 MCF_REG32(0xFC0A8014) ++#define MCF_PCI_PCIBAR2 MCF_REG32(0xFC0A8018) ++#define MCF_PCI_PCIBAR3 MCF_REG32(0xFC0A801C) ++#define MCF_PCI_PCIBAR4 MCF_REG32(0xFC0A8020) ++#define MCF_PCI_PCIBAR5 MCF_REG32(0xFC0A8024) ++#define MCF_PCI_PCISID MCF_REG32(0xFC0A802C) ++#define MCF_PCI_PCICR2 MCF_REG32(0xFC0A803C) ++#define MCF_PCI_PCIGSCR MCF_REG32(0xFC0A8060) ++#define MCF_PCI_PCITBATR0A MCF_REG32(0xFC0A8064) ++#define MCF_PCI_PCITBATR1A MCF_REG32(0xFC0A8068) ++#define MCF_PCI_PCITCR MCF_REG32(0xFC0A806C) ++#define MCF_PCI_PCIIW0BTAR MCF_REG32(0xFC0A8070) ++#define MCF_PCI_PCIIW1BTAR MCF_REG32(0xFC0A8074) ++#define MCF_PCI_PCIIW2BTAR MCF_REG32(0xFC0A8078) ++#define MCF_PCI_PCIIWCR MCF_REG32(0xFC0A8080) ++#define MCF_PCI_PCIICR MCF_REG32(0xFC0A8084) ++#define MCF_PCI_PCIISR MCF_REG32(0xFC0A8088) ++#define MCF_PCI_PCITCR2 MCF_REG32(0xFC0A808C) ++#define MCF_PCI_PCITBATR0 MCF_REG32(0xFC0A8090) ++#define MCF_PCI_PCITBATR1 MCF_REG32(0xFC0A8094) ++#define MCF_PCI_PCITBATR2 MCF_REG32(0xFC0A8098) ++#define MCF_PCI_PCITBATR3 MCF_REG32(0xFC0A809C) ++#define MCF_PCI_PCITBATR4 MCF_REG32(0xFC0A80A0) ++#define MCF_PCI_PCITBATR5 MCF_REG32(0xFC0A80A4) ++#define MCF_PCI_PCICAR MCF_REG32(0xFC0A80F8) ++ ++/* Parameterized register read/write macros for multiple registers */ ++#define MCF_PCI_PCIIWBTAR(x) MCF_REG32(0xFC0A8070+((x)*0x004)) ++ ++/* Bit definitions and macros for PCIIDR */ ++#define MCF_PCI_PCIIDR_VENDORID(x) (((x)&0x0000FFFF)) ++#define MCF_PCI_PCIIDR_DEVICEID(x) (((x)&0x0000FFFF)<<16) ++ ++/* Bit definitions and macros for PCISCR */ ++#define MCF_PCI_PCISCR_M (0x00000002) ++#define MCF_PCI_PCISCR_B (0x00000004) ++#define MCF_PCI_PCISCR_SP (0x00000008) ++#define MCF_PCI_PCISCR_MW (0x00000010) ++#define MCF_PCI_PCISCR_PER (0x00000040) ++#define MCF_PCI_PCISCR_S (0x00000100) ++#define MCF_PCI_PCISCR_F (0x00000200) ++#define MCF_PCI_PCISCR_C (0x00100000) ++#define MCF_PCI_PCISCR_66M (0x00200000) ++#define MCF_PCI_PCISCR_R (0x00400000) ++#define MCF_PCI_PCISCR_FC (0x00800000) ++#define MCF_PCI_PCISCR_DP (0x01000000) ++#define MCF_PCI_PCISCR_DT(x) (((x)&0x00000003)<<25) ++#define MCF_PCI_PCISCR_TS (0x08000000) ++#define MCF_PCI_PCISCR_TR (0x10000000) ++#define MCF_PCI_PCISCR_MA (0x20000000) ++#define MCF_PCI_PCISCR_SE (0x40000000) ++#define MCF_PCI_PCISCR_PE (0x80000000) ++ ++/* Bit definitions and macros for PCICCRIR */ ++#define MCF_PCI_PCICCRIR_REVID(x) (((x)&0x000000FF)) ++#define MCF_PCI_PCICCRIR_CLASSCODE(x) (((x)&0x00FFFFFF)<<8) ++ ++/* Bit definitions and macros for PCICR1 */ ++#define MCF_PCI_PCICR1_CACHELINESIZE(x) (((x)&0x0000000F)) ++#define MCF_PCI_PCICR1_LATTIMER(x) (((x)&0x000000FF)<<8) ++#define MCF_PCI_PCICR1_HEADERTYPE(x) (((x)&0x000000FF)<<16) ++#define MCF_PCI_PCICR1_BIST(x) (((x)&0x000000FF)<<24) ++ ++/* Bit definitions and macros for PCIBAR0 */ ++#define MCF_PCI_PCIBAR0_IO (0x00000001) ++#define MCF_PCI_PCIBAR0_RANGE(x) (((x)&0x00000003)<<1) ++#define MCF_PCI_PCIBAR0_PREF (0x00000008) ++#define MCF_PCI_PCIBAR0_BAR0(x) (((x)&0x00003FFF)<<18) ++ ++/* Bit definitions and macros for PCIBAR1 */ ++#define MCF_PCI_PCIBAR1_IO (0x00000001) ++#define MCF_PCI_PCIBAR1_PREF (0x00000008) ++#define MCF_PCI_PCIBAR1_BAR1(x) (((x)&0x00000FFF)<<20) ++ ++/* Bit definitions and macros for PCIBAR2 */ ++#define MCF_PCI_PCIBAR2_IO (0x00000001) ++#define MCF_PCI_PCIBAR2_RANGE(x) (((x)&0x00000003)<<1) ++#define MCF_PCI_PCIBAR2_PREF (0x00000008) ++#define MCF_PCI_PCIBAR2_BAR2(x) (((x)&0x000003FF)<<22) ++ ++/* Bit definitions and macros for PCIBAR3 */ ++#define MCF_PCI_PCIBAR3_IO (0x00000001) ++#define MCF_PCI_PCIBAR3_PREF (0x00000008) ++#define MCF_PCI_PCIBAR3_BAR3(x) (((x)&0x000000FF)<<24) ++ ++/* Bit definitions and macros for PCIBAR4 */ ++#define MCF_PCI_PCIBAR4_IO (0x00000001) ++#define MCF_PCI_PCIBAR4_RANGE(x) (((x)&0x00000003)<<1) ++#define MCF_PCI_PCIBAR4_PREF (0x00000008) ++#define MCF_PCI_PCIBAR4_BAR4(x) (((x)&0x0000001F)<<27) ++ ++/* Bit definitions and macros for PCIBAR5 */ ++#define MCF_PCI_PCIBAR5_IO (0x00000001) ++#define MCF_PCI_PCIBAR5_PREF (0x00000008) ++#define MCF_PCI_PCIBAR5_BAR5(x) (((x)&0x0000000F)<<28) ++ ++/* Bit definitions and macros for PCISID */ ++#define MCF_PCI_PCISID_VENDORID(x) (((x)&0x0000FFFF)) ++#define MCF_PCI_PCISID_ID(x) (((x)&0x0000FFFF)<<16) ++ ++/* Bit definitions and macros for PCICR2 */ ++#define MCF_PCI_PCICR2_INTLINE(x) (((x)&0x000000FF)) ++#define MCF_PCI_PCICR2_INTPIN(x) (((x)&0x000000FF)<<8) ++#define MCF_PCI_PCICR2_MINGNT(x) (((x)&0x000000FF)<<16) ++#define MCF_PCI_PCICR2_MAXLAT(x) (((x)&0x000000FF)<<24) ++ ++/* Bit definitions and macros for PCIGSCR */ ++#define MCF_PCI_PCIGSCR_PR (0x00000001) ++#define MCF_PCI_PCIGSCR_SEE (0x00001000) ++#define MCF_PCI_PCIGSCR_PEE (0x00002000) ++#define MCF_PCI_PCIGSCR_SE (0x10000000) ++#define MCF_PCI_PCIGSCR_PE (0x20000000) ++ ++/* Bit definitions and macros for PCITBATR0A */ ++#define MCF_PCI_PCITBATR0A_EN (0x00000001) ++#define MCF_PCI_PCITBATR0A_BAT0(x) (((x)&0x00003FFF)<<18) ++ ++/* Bit definitions and macros for PCITBATR1A */ ++#define MCF_PCI_PCITBATR1A_EN (0x00000001) ++#define MCF_PCI_PCITBATR1A_BAT1(x) (((x)&0x00000FFF)<<20) ++ ++/* Bit definitions and macros for PCITCR */ ++#define MCF_PCI_PCITCR_WCT(x) (((x)&0x000000FF)) ++#define MCF_PCI_PCITCR_WCD (0x00000100) ++#define MCF_PCI_PCITCR_P (0x00010000) ++#define MCF_PCI_PCITCR_PID (0x00020000) ++#define MCF_PCI_PCITCR_LD (0x01000000) ++ ++/* Bit definitions and macros for PCIIWBTAR group */ ++#define MCF_PCI_PCIIWBTAR_WBA(x) ((((x)&0xFF000000))) ++#define MCF_PCI_PCIIWBTAR_WAM(x) ((((x)&0xFF000000) ++#define MCF_PCI_PCIIWBTAR_WTA(x) ((((x)&0xFF000000) ++ ++/* Bit definitions and macros for PCIIW0BTAR */ ++#define MCF_PCI_PCIIW0BTAR_WBA(x) ((((x)&0xFF000000))) ++#define MCF_PCI_PCIIW0BTAR_WAM(x) ((((x)&0xFF000000) ++#define MCF_PCI_PCIIW0BTAR_WTA(x) ((((x)&0xFF000000) ++ ++/* Bit definitions and macros for PCIIWCR */ ++#define MCF_PCI_PCIIWCR_WINCTRL2(x) (((x)&0x0000000F)<<8) ++#define MCF_PCI_PCIIWCR_WINCTRL1(x) (((x)&0x0000000F)<<16) ++#define MCF_PCI_PCIIWCR_WINCTRL0(x) (((x)&0x0000000F)<<24) ++#define MCF_PCI_PCIIWCR_WINCTRL0_ENABLE (0x01000000) ++#define MCF_PCI_PCIIWCR_WINCTRL0_MEMREAD (0x01000000) ++#define MCF_PCI_PCIIWCR_WINCTRL0_MEMRDLINE (0x03000000) ++#define MCF_PCI_PCIIWCR_WINCTRL0_MEMRDMUL (0x05000000) ++#define MCF_PCI_PCIIWCR_WINCTRL0_IO (0x09000000) ++#define MCF_PCI_PCIIWCR_WINCTRL1_MEMREAD (0x00010000) ++#define MCF_PCI_PCIIWCR_WINCTRL1_ENABLE (0x00010000) ++#define MCF_PCI_PCIIWCR_WINCTRL1_MEMRDLINE (0x00030000) ++#define MCF_PCI_PCIIWCR_WINCTRL1_MEMRDMUL (0x00050000) ++#define MCF_PCI_PCIIWCR_WINCTRL1_IO (0x00090000) ++#define MCF_PCI_PCIIWCR_WINCTRL2_ENABLE (0x00000100) ++#define MCF_PCI_PCIIWCR_WINCTRL2_MEMREAD (0x00000100) ++#define MCF_PCI_PCIIWCR_WINCTRL2_MEMRDLINE (0x00000300) ++#define MCF_PCI_PCIIWCR_WINCTRL2_MEMRDMUL (0x00000500) ++#define MCF_PCI_PCIIWCR_WINCTRL2_IO (0x00000900) ++ ++/* Bit definitions and macros for PCIICR */ ++#define MCF_PCI_PCIICR_MAXRETRY(x) (((x)&0x000000FF)) ++#define MCF_PCI_PCIICR_TAE (0x01000000) ++#define MCF_PCI_PCIICR_IAE (0x02000000) ++#define MCF_PCI_PCIICR_REE (0x04000000) ++ ++/* Bit definitions and macros for PCIISR */ ++#define MCF_PCI_PCIISR_TA (0x01000000) ++#define MCF_PCI_PCIISR_IA (0x02000000) ++#define MCF_PCI_PCIISR_RE (0x04000000) ++ ++/* Bit definitions and macros for PCITCR2 */ ++#define MCF_PCI_PCITCR2_CR (0x00000001) ++#define MCF_PCI_PCITCR2_B0E (0x00000100) ++#define MCF_PCI_PCITCR2_B1E (0x00000200) ++#define MCF_PCI_PCITCR2_B2E (0x00000400) ++#define MCF_PCI_PCITCR2_B3E (0x00000800) ++#define MCF_PCI_PCITCR2_B4E (0x00001000) ++#define MCF_PCI_PCITCR2_B5E (0x00002000) ++ ++/* Bit definitions and macros for PCITBATR0 */ ++#define MCF_PCI_PCITBATR0_EN (0x00000001) ++#define MCF_PCI_PCITBATR0_BAT0(x) (((x)&0x00003FFF)<<18) ++ ++/* Bit definitions and macros for PCITBATR1 */ ++#define MCF_PCI_PCITBATR1_EN (0x00000001) ++#define MCF_PCI_PCITBATR1_BAT1(x) (((x)&0x00000FFF)<<20) ++ ++/* Bit definitions and macros for PCITBATR2 */ ++#define MCF_PCI_PCITBATR2_EN (0x00000001) ++#define MCF_PCI_PCITBATR2_BAT2(x) (((x)&0x000003FF)<<22) ++ ++/* Bit definitions and macros for PCITBATR3 */ ++#define MCF_PCI_PCITBATR3_EN (0x00000001) ++#define MCF_PCI_PCITBATR3_BAT3(x) (((x)&0x000000FF)<<24) ++ ++/* Bit definitions and macros for PCITBATR4 */ ++#define MCF_PCI_PCITBATR4_EN (0x00000001) ++#define MCF_PCI_PCITBATR4_BAT4(x) (((x)&0x0000001F)<<27) ++ ++/* Bit definitions and macros for PCITBATR5 */ ++#define MCF_PCI_PCITBATR5_EN (0x00000001) ++#define MCF_PCI_PCITBATR5_BAT5(x) (((x)&0x0000000F)<<28) ++ ++/* Bit definitions and macros for PCICAR */ ++#define MCF_PCI_PCICAR_DWORD(x) ((x)&0x000000FC) ++#define MCF_PCI_PCICAR_FUNCNUM(x) (((x)&0x00000007)<<8) ++#define MCF_PCI_PCICAR_DEVNUM(x) (((x)&0x0000001F)<<11) ++#define MCF_PCI_PCICAR_BUSNUM(x) (((x)&0x000000FF)<<16) ++#define MCF_PCI_PCICAR_E (0x80000000) ++ ++/********************************************************************/ ++ ++#endif /* __MCF5445X_PCI_H__ */ +--- /dev/null ++++ b/include/asm-m68k/mcf5445x_sdramc.h +@@ -0,0 +1,115 @@ ++/* ++ * Matt Waddel Matt.Waddel@freescale.com ++ * ++ * Copyright Freescale Semiconductor, Inc. 2007 ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ */ ++ ++#ifndef __MCF5445X_SDRAMC_H__ ++#define __MCF5445X_SDRAMC_H__ ++ ++/********************************************************************* ++* ++* SDRAM Controller (SDRAMC) ++* ++*********************************************************************/ ++ ++/* Register read/write macros */ ++#define MCF_SDRAMC_SDMR (*(vuint32 *)(0xFC0B8000)) /* SDRAM Mode/Extended Mode Register */ ++#define MCF_SDRAMC_SDCR (*(vuint32 *)(0xFC0B8004)) /* SDRAM Control Register */ ++#define MCF_SDRAMC_SDCFG1 (*(vuint32 *)(0xFC0B8008)) /* SDRAM Configuration Register 1 */ ++#define MCF_SDRAMC_SDCFG2 (*(vuint32 *)(0xFC0B800C)) /* SDRAM Configuration Register 2 */ ++#define MCF_SDRAMC_SDCS0 (*(vuint32 *)(0xFC0B8110)) /* SDRAM Chip Select Register */ ++#define MCF_SDRAMC_SDCS1 (*(vuint32 *)(0xFC0B8114)) /* SDRAM Chip Select Register */ ++ ++/* Parameterized register read/write macros for multiple registers */ ++#define MCF_SDRAMC_SDCS(x) (*(vuint32 *)(0xFC0B8110+((x)*0x004))) /* SDRAM Chip Select Register */ ++ ++/* Bit definitions and macros for SDMR */ ++#define MCF_SDRAMC_SDMR_DDR2_AD(x) (((x)&0x00003FFF)) /* Address for DDR2 */ ++#define MCF_SDRAMC_SDMR_CMD (0x00010000) /* Command */ ++#define MCF_SDRAMC_SDMR_AD(x) (((x)&0x00000FFF)<<18) /* Address */ ++#define MCF_SDRAMC_SDMR_BK(x) (((x)&0x00000003)<<30) /* Bank Address */ ++#define MCF_SDRAMC_SDMR_BK_LMR (0x00000000) ++#define MCF_SDRAMC_SDMR_BK_LEMR (0x40000000) ++ ++/* Bit definitions and macros for SDCR */ ++#define MCF_SDRAMC_SDCR_DPD (0x00000001) /* Deep Power-Down Mode */ ++#define MCF_SDRAMC_SDCR_IPALL (0x00000002) /* Initiate Precharge All */ ++#define MCF_SDRAMC_SDCR_IREF (0x00000004) /* Initiate Refresh */ ++#define MCF_SDRAMC_SDCR_DQS_OE(x) (((x)&0x00000003)<<10) /* DQS Output Enable */ ++#define MCF_SDRAMC_SDCR_MEM_PS (0x00002000) /* Data Port Size */ ++#define MCF_SDRAMC_SDCR_REF_CNT(x) (((x)&0x0000003F)<<16) /* Periodic Refresh Counter */ ++#define MCF_SDRAMC_SDCR_OE_RULE (0x00400000) /* Drive Rule Selection */ ++#define MCF_SDRAMC_SDCR_ADDR_MUX(x) (((x)&0x00000003)<<24) /* Internal Address Mux Select */ ++#define MCF_SDRAMC_SDCR_DDR2_MODE (0x08000000) /* DDR2 Mode Select */ ++#define MCF_SDRAMC_SDCR_REF_EN (0x10000000) /* Refresh Enable */ ++#define MCF_SDRAMC_SDCR_DDR_MODE (0x20000000) /* DDR Mode Select */ ++#define MCF_SDRAMC_SDCR_CKE (0x40000000) /* Clock Enable */ ++#define MCF_SDRAMC_SDCR_MODE_EN (0x80000000) /* SDRAM Mode Register Programming Enable */ ++#define MCF_SDRAMC_SDCR_DQS_OE_BOTH (0x00000C00) ++ ++/* Bit definitions and macros for SDCFG1 */ ++#define MCF_SDRAMC_SDCFG1_WT_LAT(x) (((x)&0x00000007)<<4) /* Write Latency */ ++#define MCF_SDRAMC_SDCFG1_REF2ACT(x) (((x)&0x0000000F)<<8) /* Refresh to active delay */ ++#define MCF_SDRAMC_SDCFG1_PRE2ACT(x) (((x)&0x00000007)<<12) /* Precharge to active delay */ ++#define MCF_SDRAMC_SDCFG1_ACT2RW(x) (((x)&0x00000007)<<16) /* Active to read/write delay */ ++#define MCF_SDRAMC_SDCFG1_RD_LAT(x) (((x)&0x0000000F)<<20) /* Read CAS Latency */ ++#define MCF_SDRAMC_SDCFG1_SWT2RWP(x) (((x)&0x00000007)<<24) /* Single write to read/write/precharge delay */ ++#define MCF_SDRAMC_SDCFG1_SRD2RWP(x) (((x)&0x0000000F)<<28) /* Single read to read/write/precharge delay */ ++ ++/* Bit definitions and macros for SDCFG2 */ ++#define MCF_SDRAMC_SDCFG2_BL(x) (((x)&0x0000000F)<<16) /* Burst Length */ ++#define MCF_SDRAMC_SDCFG2_BRD2W(x) (((x)&0x0000000F)<<20) /* Burst read to write delay */ ++#define MCF_SDRAMC_SDCFG2_BWT2RWP(x) (((x)&0x0000000F)<<24) /* Burst write to read/write/precharge delay */ ++#define MCF_SDRAMC_SDCFG2_BRD2RP(x) (((x)&0x0000000F)<<28) /* Burst read to read/precharge delay */ ++ ++/* Bit definitions and macros for SDCS group */ ++#define MCF_SDRAMC_SDCS_CSSZ(x) (((x)&0x0000001F)) /* Chip-Select Size */ ++#define MCF_SDRAMC_SDCS_CSBA(x) (((x)&0x00000FFF)<<20) /* Chip-Select Base Address */ ++#define MCF_SDRAMC_SDCS_BA(x) ((x)&0xFFF00000) ++#define MCF_SDRAMC_SDCS_CSSZ_DISABLE (0x00000000) ++#define MCF_SDRAMC_SDCS_CSSZ_1MBYTE (0x00000013) ++#define MCF_SDRAMC_SDCS_CSSZ_2MBYTE (0x00000014) ++#define MCF_SDRAMC_SDCS_CSSZ_4MBYTE (0x00000015) ++#define MCF_SDRAMC_SDCS_CSSZ_8MBYTE (0x00000016) ++#define MCF_SDRAMC_SDCS_CSSZ_16MBYTE (0x00000017) ++#define MCF_SDRAMC_SDCS_CSSZ_32MBYTE (0x00000018) ++#define MCF_SDRAMC_SDCS_CSSZ_64MBYTE (0x00000019) ++#define MCF_SDRAMC_SDCS_CSSZ_128MBYTE (0x0000001A) ++#define MCF_SDRAMC_SDCS_CSSZ_256MBYTE (0x0000001B) ++#define MCF_SDRAMC_SDCS_CSSZ_512MBYTE (0x0000001C) ++#define MCF_SDRAMC_SDCS_CSSZ_1GBYTE (0x0000001D) ++#define MCF_SDRAMC_SDCS_CSSZ_2GBYTE (0x0000001E) ++#define MCF_SDRAMC_SDCS_CSSZ_4GBYTE (0x0000001F) ++ ++/* Bit definitions and macros for SDCS0 */ ++#define MCF_SDRAMC_SDCS0_CSSZ(x) (((x)&0x0000001F)) /* Chip-Select Size */ ++#define MCF_SDRAMC_SDCS0_CSBA(x) (((x)&0x00000FFF)<<20) /* Chip-Select Base Address */ ++#define MCF_SDRAMC_SDCS0_BA(x) ((x)&0xFFF00000) ++#define MCF_SDRAMC_SDCS0_CSSZ_DISABLE (0x00000000) ++#define MCF_SDRAMC_SDCS0_CSSZ_1MBYTE (0x00000013) ++#define MCF_SDRAMC_SDCS0_CSSZ_2MBYTE (0x00000014) ++#define MCF_SDRAMC_SDCS0_CSSZ_4MBYTE (0x00000015) ++#define MCF_SDRAMC_SDCS0_CSSZ_8MBYTE (0x00000016) ++#define MCF_SDRAMC_SDCS0_CSSZ_16MBYTE (0x00000017) ++#define MCF_SDRAMC_SDCS0_CSSZ_32MBYTE (0x00000018) ++#define MCF_SDRAMC_SDCS0_CSSZ_64MBYTE (0x00000019) ++#define MCF_SDRAMC_SDCS0_CSSZ_128MBYTE (0x0000001A) ++#define MCF_SDRAMC_SDCS0_CSSZ_256MBYTE (0x0000001B) ++#define MCF_SDRAMC_SDCS0_CSSZ_512MBYTE (0x0000001C) ++#define MCF_SDRAMC_SDCS0_CSSZ_1GBYTE (0x0000001D) ++#define MCF_SDRAMC_SDCS0_CSSZ_2GBYTE (0x0000001E) ++#define MCF_SDRAMC_SDCS0_CSSZ_4GBYTE (0x0000001F) ++ ++/* Bit definitions and macros for SDCS1 */ ++#define MCF_SDRAMC_SDCS1_CSSZ(x) (((x)&0x0000001F)) /* Chip-Select Size */ ++#define MCF_SDRAMC_SDCS1_CSBA(x) (((x)&0x00000FFF)<<20) /* Chip-Select Base Address */ ++ ++/********************************************************************/ ++ ++#endif /* __MCF5445X_SDRAMC_H__ */ +--- /dev/null ++++ b/include/asm-m68k/mcf5445x_ssi.h +@@ -0,0 +1,187 @@ ++/* ++ * Yaroslav Vinogradov yaroslav.vinogradov@freescale.com ++ * ++ * Copyright Freescale Semiconductor, Inc. 2007 ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ */ ++ ++#ifndef __MCF5445X_SSI_H__ ++#define __MCF5445X_SSI_H__ ++ ++/********************************************************************* ++* ++* Synchronous Serial Interface (SSI) ++* ++*********************************************************************/ ++ ++/* Register read/write macros */ ++#define MCF_SSI_TX0 MCF_REG32(0xFC0BC000) ++#define MCF_SSI_TX1 MCF_REG32(0xFC0BC004) ++#define MCF_SSI_RX0 MCF_REG32(0xFC0BC008) ++#define MCF_SSI_RX1 MCF_REG32(0xFC0BC00C) ++#define MCF_SSI_CR MCF_REG32(0xFC0BC010) ++#define MCF_SSI_ISR MCF_REG32(0xFC0BC014) ++#define MCF_SSI_IER MCF_REG32(0xFC0BC018) ++#define MCF_SSI_TCR MCF_REG32(0xFC0BC01C) ++#define MCF_SSI_RCR MCF_REG32(0xFC0BC020) ++#define MCF_SSI_CCR MCF_REG32(0xFC0BC024) ++#define MCF_SSI_FCSR MCF_REG32(0xFC0BC02C) ++#define MCF_SSI_ACR MCF_REG32(0xFC0BC038) ++#define MCF_SSI_ACADD MCF_REG32(0xFC0BC03C) ++#define MCF_SSI_ACDAT MCF_REG32(0xFC0BC040) ++#define MCF_SSI_ATAG MCF_REG32(0xFC0BC044) ++#define MCF_SSI_TMASK MCF_REG32(0xFC0BC048) ++#define MCF_SSI_RMASK MCF_REG32(0xFC0BC04C) ++ ++/* Parameterized register read/write macros for multiple registers */ ++#define MCF_SSI_TX(x) MCF_REG32(0xFC0BC000+((x)*0x004)) ++#define MCF_SSI_RX(x) MCF_REG32(0xFC0BC008+((x)*0x004)) ++ ++/* Bit definitions and macros for TX group */ ++#define MCF_SSI_TX_SSI_TX(x) (x) ++ ++/* Bit definitions and macros for TX0 */ ++#define MCF_SSI_TX0_SSI_TX(x) (x) ++ ++/* Bit definitions and macros for TX1 */ ++#define MCF_SSI_TX1_SSI_TX(x) (x) ++ ++/* Bit definitions and macros for RX group */ ++#define MCF_SSI_RX_SSI_RX(x) (x) ++ ++/* Bit definitions and macros for RX0 */ ++#define MCF_SSI_RX0_SSI_RX(x) (x) ++ ++/* Bit definitions and macros for RX1 */ ++#define MCF_SSI_RX1_SSI_RX(x) (x) ++ ++/* Bit definitions and macros for CR */ ++#define MCF_SSI_CR_SSI_EN (0x00000001) ++#define MCF_SSI_CR_TE (0x00000002) ++#define MCF_SSI_CR_RE (0x00000004) ++#define MCF_SSI_CR_NET (0x00000008) ++#define MCF_SSI_CR_SYN (0x00000010) ++#define MCF_SSI_CR_I2S(x) (((x)&0x00000003)<<5) ++#define MCF_SSI_CR_MCE (0x00000080) ++#define MCF_SSI_CR_TCH (0x00000100) ++#define MCF_SSI_CR_CIS (0x00000200) ++#define MCF_SSI_CR_I2S_NORMAL (0x00000000) ++#define MCF_SSI_CR_I2S_MASTER (0x00000020) ++#define MCF_SSI_CR_I2S_SLAVE (0x00000040) ++ ++/* Bit definitions and macros for ISR */ ++#define MCF_SSI_ISR_TFE0 (0x00000001) ++#define MCF_SSI_ISR_TFE1 (0x00000002) ++#define MCF_SSI_ISR_RFF0 (0x00000004) ++#define MCF_SSI_ISR_RFF1 (0x00000008) ++#define MCF_SSI_ISR_RLS (0x00000010) ++#define MCF_SSI_ISR_TLS (0x00000020) ++#define MCF_SSI_ISR_RFS (0x00000040) ++#define MCF_SSI_ISR_TFS (0x00000080) ++#define MCF_SSI_ISR_TUE0 (0x00000100) ++#define MCF_SSI_ISR_TUE1 (0x00000200) ++#define MCF_SSI_ISR_ROE0 (0x00000400) ++#define MCF_SSI_ISR_ROE1 (0x00000800) ++#define MCF_SSI_ISR_TDE0 (0x00001000) ++#define MCF_SSI_ISR_TDE1 (0x00002000) ++#define MCF_SSI_ISR_RDR0 (0x00004000) ++#define MCF_SSI_ISR_RDR1 (0x00008000) ++#define MCF_SSI_ISR_RXT (0x00010000) ++#define MCF_SSI_ISR_CMDDU (0x00020000) ++#define MCF_SSI_ISR_CMDAU (0x00040000) ++ ++/* Bit definitions and macros for IER */ ++#define MCF_SSI_IER_TFE0 (0x00000001) ++#define MCF_SSI_IER_TFE1 (0x00000002) ++#define MCF_SSI_IER_RFF0 (0x00000004) ++#define MCF_SSI_IER_RFF1 (0x00000008) ++#define MCF_SSI_IER_RLS (0x00000010) ++#define MCF_SSI_IER_TLS (0x00000020) ++#define MCF_SSI_IER_RFS (0x00000040) ++#define MCF_SSI_IER_TFS (0x00000080) ++#define MCF_SSI_IER_TUE0 (0x00000100) ++#define MCF_SSI_IER_TUE1 (0x00000200) ++#define MCF_SSI_IER_ROE0 (0x00000400) ++#define MCF_SSI_IER_ROE1 (0x00000800) ++#define MCF_SSI_IER_TDE0 (0x00001000) ++#define MCF_SSI_IER_TDE1 (0x00002000) ++#define MCF_SSI_IER_RDR0 (0x00004000) ++#define MCF_SSI_IER_RDR1 (0x00008000) ++#define MCF_SSI_IER_RXT (0x00010000) ++#define MCF_SSI_IER_CMDU (0x00020000) ++#define MCF_SSI_IER_CMDAU (0x00040000) ++#define MCF_SSI_IER_TIE (0x00080000) ++#define MCF_SSI_IER_TDMAE (0x00100000) ++#define MCF_SSI_IER_RIE (0x00200000) ++#define MCF_SSI_IER_RDMAE (0x00400000) ++ ++/* Bit definitions and macros for TCR */ ++#define MCF_SSI_TCR_TEFS (0x00000001) ++#define MCF_SSI_TCR_TFSL (0x00000002) ++#define MCF_SSI_TCR_TFSI (0x00000004) ++#define MCF_SSI_TCR_TSCKP (0x00000008) ++#define MCF_SSI_TCR_TSHFD (0x00000010) ++#define MCF_SSI_TCR_TXDIR (0x00000020) ++#define MCF_SSI_TCR_TFDIR (0x00000040) ++#define MCF_SSI_TCR_TFEN0 (0x00000080) ++#define MCF_SSI_TCR_TFEN1 (0x00000100) ++#define MCF_SSI_TCR_TXBIT0 (0x00000200) ++ ++/* Bit definitions and macros for RCR */ ++#define MCF_SSI_RCR_REFS (0x00000001) ++#define MCF_SSI_RCR_RFSL (0x00000002) ++#define MCF_SSI_RCR_RFSI (0x00000004) ++#define MCF_SSI_RCR_RSCKP (0x00000008) ++#define MCF_SSI_RCR_RSHFD (0x00000010) ++#define MCF_SSI_RCR_RFEN0 (0x00000080) ++#define MCF_SSI_RCR_RFEN1 (0x00000100) ++#define MCF_SSI_RCR_RXBIT0 (0x00000200) ++#define MCF_SSI_RCR_RXEXT (0x00000400) ++ ++/* Bit definitions and macros for CCR */ ++#define MCF_SSI_CCR_PM(x) (((x)&0x000000FF)) ++#define MCF_SSI_CCR_DC(x) (((x)&0x0000001F)<<8) ++#define MCF_SSI_CCR_WL(x) (((x)&0x0000000F)<<13) ++#define MCF_SSI_CCR_PSR (0x00020000) ++#define MCF_SSI_CCR_DIV2 (0x00040000) ++ ++/* Bit definitions and macros for FCSR */ ++#define MCF_SSI_FCSR_TFWM0(x) (((x)&0x0000000F)) ++#define MCF_SSI_FCSR_RFWM0(x) (((x)&0x0000000F)<<4) ++#define MCF_SSI_FCSR_TFCNT0(x) (((x)&0x0000000F)<<8) ++#define MCF_SSI_FCSR_RFCNT0(x) (((x)&0x0000000F)<<12) ++#define MCF_SSI_FCSR_TFWM1(x) (((x)&0x0000000F)<<16) ++#define MCF_SSI_FCSR_RFWM1(x) (((x)&0x0000000F)<<20) ++#define MCF_SSI_FCSR_TFCNT1(x) (((x)&0x0000000F)<<24) ++#define MCF_SSI_FCSR_RFCNT1(x) (((x)&0x0000000F)<<28) ++ ++/* Bit definitions and macros for ACR */ ++#define MCF_SSI_ACR_AC97EN (0x00000001) ++#define MCF_SSI_ACR_FV (0x00000002) ++#define MCF_SSI_ACR_TIF (0x00000004) ++#define MCF_SSI_ACR_RD (0x00000008) ++#define MCF_SSI_ACR_WR (0x00000010) ++#define MCF_SSI_ACR_FRDIV(x) (((x)&0x0000003F)<<5) ++ ++/* Bit definitions and macros for ACADD */ ++#define MCF_SSI_ACADD_SSI_ACADD(x) (((x)&0x0007FFFF)) ++ ++/* Bit definitions and macros for ACDAT */ ++#define MCF_SSI_ACDAT_SSI_ACDAT(x) (((x)&0x0007FFFF)) ++ ++/* Bit definitions and macros for ATAG */ ++#define MCF_SSI_ATAG_DDI_ATAG(x) (((x)&0x0000FFFF)) ++ ++/* Bit definitions and macros for TMASK */ ++#define MCF_SSI_TMASK_SSI_TMASK(x) (x) ++ ++/* Bit definitions and macros for RMASK */ ++#define MCF_SSI_RMASK_SSI_RMASK(x) (x) ++ ++/********************************************************************/ ++ ++#endif /* __MCF5445X_SSI_H__ */ +--- /dev/null ++++ b/include/asm-m68k/mcf5445x_usb.h +@@ -0,0 +1,50 @@ ++/* ++ * Duck Schmid duck@freescale.com ++ * ++ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. ++ */ ++ ++/* ++ * The code contained herein is licensed under the GNU General Public ++ * License. You may obtain a copy of the GNU General Public License ++ * Version 2 or later at the following locations: ++ * ++ * http://www.opensource.org/licenses/gpl-license.html ++ * http://www.gnu.org/copyleft/gpl.html ++ */ ++ ++#include <asm/mcfsim.h> ++ ++/* ehci_arc_hc_driver.flags value */ ++#define FSL_PLATFORM_HC_FLAGS (HCD_USB2 | HCD_MEMORY) ++ ++static inline int fsl_platform_verify(struct platform_device *pdev) ++{ ++ return 0; ++} ++ ++static inline void fsl_platform_usb_setup(struct usb_hcd *hcd) ++{ ++} ++ ++static inline void fsl_platform_set_host_mode(struct usb_hcd *hcd) ++{ ++ unsigned int temp; ++ struct fsl_usb2_platform_data *pdata; ++ struct fsl_usb_host_regs *regs; ++ ++ pdata = hcd->self.controller->platform_data; ++ regs = pdata->regs; ++ ++ if (pdata->xcvr_ops && pdata->xcvr_ops->set_host) ++ pdata->xcvr_ops->set_host(); ++ ++ /* set host mode and select "big endian" */ ++ temp = fsl_readl(®s->usbmode); ++ temp |= USBMODE_CM_HOST | (pdata->es ? USBMODE_ES : 0); ++ fsl_writel(temp, ®s->usbmode); ++ ++ pr_debug("%s: set usbmode to 0x%x\n\n", __FUNCTION__, ++ fsl_readl(®s->usbmode)); ++ ++} +--- /dev/null ++++ b/include/asm-m68k/mcf5445x_xbs.h +@@ -0,0 +1,81 @@ ++/* ++ * Kurt Mahan kmahan@freescale.com ++ * ++ * Copyright Freescale Semiconductor, Inc. 2007 ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ */ ++ ++#ifndef __MCF5445X_XBS_H__ ++#define __MCF5445X_XBS_H__ ++ ++/* ++ * Crossbar Switch (XBS) ++ */ ++ ++/* Register read/write macros */ ++#define MCF_XBS_PRS1 MCF_REG32(0xFC004100) /* Flexbus Priority */ ++#define MCF_XBS_CRS1 MCF_REG32(0xFC004110) /* Flexbus Control */ ++#define MCF_XBS_PRS2 MCF_REG32(0xFC004200) /* SDRam Priority */ ++#define MCF_XBS_CRS2 MCF_REG32(0xFC004210) /* SDRam Control */ ++#define MCF_XBS_PRS3 MCF_REG32(0xFC004300) /* ATA Priority */ ++#define MCF_XBS_CRS3 MCF_REG32(0xFC004310) /* ATA Control */ ++#define MCF_XBS_PRS4 MCF_REG32(0xFC004400) /* SRAM Priority */ ++#define MCF_XBS_CRS4 MCF_REG32(0xFC004410) /* SRAM Control */ ++#define MCF_XBS_PRS5 MCF_REG32(0xFC004500) /* PCI Priority */ ++#define MCF_XBS_CRS5 MCF_REG32(0xFC004510) /* PCI Control */ ++#define MCF_XBS_PRS6 MCF_REG32(0xFC004600) /* Slave6 Priority */ ++#define MCF_XBS_CRS6 MCF_REG32(0xFC004610) /* Slave6 Control */ ++#define MCF_XBS_PRS7 MCF_REG32(0xFC004700) /* Other Priority */ ++#define MCF_XBS_CRS7 MCF_REG32(0xFC004710) /* Other Control */ ++ ++/* Priorities */ ++#define MCF_XBS_PRI_1 0 /* Level 1 (highest) */ ++#define MCF_XBS_PRI_2 1 /* Level 2 */ ++#define MCF_XBS_PRI_3 2 /* Level 3 */ ++#define MCF_XBS_PRI_4 3 /* Level 4 */ ++#define MCF_XBS_PRI_5 4 /* Level 5 */ ++#define MCF_XBS_PRI_6 5 /* Level 6 */ ++#define MCF_XBS_PRI_7 6 /* Level 7 (lowest) */ ++#define MCF_XBS_PRI_MASK 7 /* Mask (Not a valid level) */ ++ ++/* Priority Register (PRSn) Defs */ ++#define MCF_XBS_PRS_MACRO(m,p) ((p)<<((m)<<2)) ++#define MCF_XBS_PRS_M0(p) MCF_XBS_PRS_MACRO(0, p) /* Coldfire Core */ ++#define MCF_XBS_PRS_M1(p) MCF_XBS_PRS_MACRO(1, p) /* eDMA */ ++#define MCF_XBS_PRS_M2(p) MCF_XBS_PRS_MACRO(2, p) /* FEC0 */ ++#define MCF_XBS_PRS_M3(p) MCF_XBS_PRS_MACRO(3, p) /* FEC1 */ ++#define MCF_XBS_PRS_M4(p) MCF_XBS_PRS_MACRO(4, p) /* Master 4 */ ++#define MCF_XBS_PRS_M5(p) MCF_XBS_PRS_MACRO(5, p) /* PCI */ ++#define MCF_XBS_PRS_M6(p) MCF_XBS_PRS_MACRO(6, p) /* USB OTG */ ++#define MCF_XBS_PRS_M7(p) MCF_XBS_PRS_MACRO(7, p) /* Serial Boot */ ++ ++/* Control Register (CRSn) Defs */ ++#define MCF_XBS_CRS_RO 0x80000000 /* Read Only */ ++#define MCF_XBS_CRS_ARB 0x00000100 /* Arbitration Mode */ ++#define MCF_XBS_CRS_PCTL 0x00000030 /* Parking Control */ ++#define MCF_XBS_CRS_PARK 0x00000007 /* Park Location */ ++ ++/* MCF_XBS_CRS_ARB Defs */ ++#define MCF_ABS_CRS_ARB_FIXED 0x00000000 /* Fixed priority */ ++#define MCF_ABS_CRS_ARB_ROUND 0x00000100 /* Round Robin priority */ ++ ++/* MCF_XBS_CRS_PCTL Defs */ ++#define MCF_ABS_CRS_PCTL_PARK 0x00000000 /* Park on the defined PARK */ ++#define MCF_ABS_CRS_PCTL_LAST 0x00000010 /* Park on the last master */ ++#define MCF_ABS_CRS_PCTL_NONE 0x00000020 /* Don't park */ ++ ++/* MCF_XBS_CRS_PARK Defs */ ++#define MCF_ABS_CRS_PARK_M0 0x00000000 /* Park on Coldfire Core */ ++#define MCF_ABS_CRS_PARK_M1 0x00000001 /* Park on eDMA */ ++#define MCF_ABS_CRS_PARK_M2 0x00000002 /* Park on FEC0 */ ++#define MCF_ABS_CRS_PARK_M3 0x00000003 /* Park on FEC1 */ ++#define MCF_ABS_CRS_PARK_M4 0x00000004 /* Park on Reserved */ ++#define MCF_ABS_CRS_PARK_M5 0x00000005 /* Park on PCI */ ++#define MCF_ABS_CRS_PARK_M6 0x00000006 /* Park on USB OTG */ ++#define MCF_ABS_CRS_PARK_M7 0x00000007 /* Park on Serial Boot */ ++ ++#endif /* __MCF5445X_XBS_H__ */ +--- /dev/null ++++ b/include/asm-m68k/mcfdspi.h +@@ -0,0 +1,48 @@ ++/* ++ * mcfdspi.h-DSPI controller for the ColdFire processors. ++ * ++ * Andrey Butok ++ * Copyright Freescale Semiconductor, Inc. 2008 ++ * ++ * This file is based on mcfqspi.h ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ * ++ *************************************************************************** ++ * Changes: ++ * v0.001 25 March 2008 Andrey Butok ++ * Initial Release - developed on uClinux with 2.6.23 kernel. ++ * ++ */ ++ ++#ifndef MCFDSPI_H_ ++#define MCFDSPI_H_ ++ ++struct coldfire_dspi_chip { ++ u8 mode; ++ u8 bits_per_word; ++ u16 void_write_data; ++ /* Only used in master mode */ ++ u8 dbr; /* Double baud rate */ ++ u8 pbr; /* Baud rate prescaler */ ++ u8 br; /* Baud rate scaler */ ++ u8 pcssck; /* PCS to SCK delay prescaler */ ++ u8 pasc; /* After SCK delay prescaler */ ++ u8 pdt; /* Delay after transfer prescaler */ ++ u8 cssck; /* PCS to SCK delay scaler */ ++ u8 asc; /* After SCK delay scaler */ ++ u8 dt; /* Delay after transfer scaler */ ++}; ++#endif /*MCFDSPI_H_*/ +--- /dev/null ++++ b/include/asm-m68k/mcfqspi.h +@@ -0,0 +1,51 @@ ++/****************************************************************************/ ++/* ++ * mcfqspi.h - Master QSPI controller for the ColdFire processors ++ * ++ * (C) Copyright 2005, Intec Automation, ++ * Mike Lavender (mike@steroidmicros) ++ * ++ ++ This program is free software; you can redistribute it and/or modify ++ it under the terms of the GNU General Public License as published by ++ the Free Software Foundation; either version 2 of the License, or ++ (at your option) any later version. ++ ++ This program is distributed in the hope that it will be useful, ++ but WITHOUT ANY WARRANTY; without even the implied warranty of ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ GNU General Public License for more details. ++ ++ You should have received a copy of the GNU General Public License ++ along with this program; if not, write to the Free Software ++ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ ++/* ------------------------------------------------------------------------- */ ++ ++#ifndef MCFQSPI_H_ ++#define MCFQSPI_H_ ++ ++#define QSPI_CS_INIT 0x01 ++#define QSPI_CS_ASSERT 0x02 ++#define QSPI_CS_DROP 0x04 ++ ++struct coldfire_spi_master { ++ u16 bus_num; ++ u16 num_chipselect; ++ u8 irq_source; ++ u32 irq_vector; ++ u32 irq_mask; ++ u8 irq_lp; ++ u8 par_val; ++ u32 *irq_list; ++ void (*cs_control)(u8 cs, u8 command); ++}; ++ ++ ++struct coldfire_spi_chip { ++ u8 mode; ++ u8 bits_per_word; ++ u8 del_cs_to_clk; ++ u8 del_after_trans; ++ u16 void_write_data; ++}; ++#endif /*MCFQSPI_H_*/ +--- /dev/null ++++ b/include/asm-m68k/mcfsim.h +@@ -0,0 +1,102 @@ ++/* ++ * mcfsim.h -- ColdFire System Integration Module support. ++ * ++ * (C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com) ++ * (C) Copyright 2000, Lineo Inc. (www.lineo.com) ++ */ ++ ++#ifndef mcfsim_h ++#define mcfsim_h ++ ++#if defined(CONFIG_COLDFIRE) ++#include <asm/coldfire.h> ++#endif ++ ++#if defined(CONFIG_M5445X) ++#include <asm/mcf5445x_intc.h> ++#include <asm/mcf5445x_gpio.h> ++#include <asm/mcf5445x_i2c.h> ++#include <asm/mcf5445x_ccm.h> ++#include <asm/mcf5445x_pci.h> ++#include <asm/mcf5445x_pciarb.h> ++#include <asm/mcf5445x_eport.h> ++#include <asm/mcf5445x_fbcs.h> ++#include <asm/mcf5445x_xbs.h> ++#include <asm/mcf5445x_dtim.h> ++#elif defined(CONFIG_M547X_8X) ++#include <asm/m5485sim.h> ++#include <asm/m5485gpio.h> ++#endif ++ ++/* ++ * Define the base address of the SIM within the MBAR address space. ++ */ ++#define MCFSIM_BASE 0x0 /* Base address of SIM */ ++ ++/* ++ * Bit definitions for the ICR family of registers. ++ */ ++#define MCFSIM_ICR_AUTOVEC 0x80 /* Auto-vectored intr */ ++#define MCFSIM_ICR_LEVEL0 0x00 /* Level 0 intr */ ++#define MCFSIM_ICR_LEVEL1 0x04 /* Level 1 intr */ ++#define MCFSIM_ICR_LEVEL2 0x08 /* Level 2 intr */ ++#define MCFSIM_ICR_LEVEL3 0x0c /* Level 3 intr */ ++#define MCFSIM_ICR_LEVEL4 0x10 /* Level 4 intr */ ++#define MCFSIM_ICR_LEVEL5 0x14 /* Level 5 intr */ ++#define MCFSIM_ICR_LEVEL6 0x18 /* Level 6 intr */ ++#define MCFSIM_ICR_LEVEL7 0x1c /* Level 7 intr */ ++ ++#define MCFSIM_ICR_PRI0 0x00 /* Priority 0 intr */ ++#define MCFSIM_ICR_PRI1 0x01 /* Priority 1 intr */ ++#define MCFSIM_ICR_PRI2 0x02 /* Priority 2 intr */ ++#define MCFSIM_ICR_PRI3 0x03 /* Priority 3 intr */ ++ ++/* ++ * Bit definitions for the Interrupt Mask register (IMR). ++ */ ++#define MCFSIM_IMR_EINT1 0x0002 /* External intr # 1 */ ++#define MCFSIM_IMR_EINT2 0x0004 /* External intr # 2 */ ++#define MCFSIM_IMR_EINT3 0x0008 /* External intr # 3 */ ++#define MCFSIM_IMR_EINT4 0x0010 /* External intr # 4 */ ++#define MCFSIM_IMR_EINT5 0x0020 /* External intr # 5 */ ++#define MCFSIM_IMR_EINT6 0x0040 /* External intr # 6 */ ++#define MCFSIM_IMR_EINT7 0x0080 /* External intr # 7 */ ++ ++#define MCFSIM_IMR_SWD 0x0100 /* Software Watchdog intr */ ++#define MCFSIM_IMR_TIMER1 0x0200 /* TIMER 1 intr */ ++#define MCFSIM_IMR_TIMER2 0x0400 /* TIMER 2 intr */ ++#define MCFSIM_IMR_MBUS 0x0800 /* MBUS intr */ ++#define MCFSIM_IMR_UART1 0x1000 /* UART 1 intr */ ++#define MCFSIM_IMR_UART2 0x2000 /* UART 2 intr */ ++ ++/* ++ * Mask for all of the SIM devices. Some parts have more or less ++ * SIM devices. This is a catchall for the sandard set. ++ */ ++#ifndef MCFSIM_IMR_MASKALL ++#define MCFSIM_IMR_MASKALL 0x3ffe /* All intr sources */ ++#endif ++ ++ ++/* ++ * PIT interrupt settings, if not found in mXXXXsim.h file. ++ */ ++#ifndef ICR_INTRCONF ++#define ICR_INTRCONF 0x2b /* PIT1 level 5, priority 3 */ ++#endif ++#ifndef MCFPIT_IMR ++#define MCFPIT_IMR MCFINTC_IMRH ++#endif ++#ifndef MCFPIT_IMR_IBIT ++#define MCFPIT_IMR_IBIT (1 << (MCFINT_PIT1 - 32)) ++#endif ++ ++ ++#ifndef __ASSEMBLY__ ++/* ++ * Definition for the interrupt auto-vectoring support. ++ */ ++extern void mcf_autovector(unsigned int vec); ++#endif /* __ASSEMBLY__ */ ++ ++#endif /* mcfsim_h */ +--- /dev/null ++++ b/include/asm-m68k/mcfuart.h +@@ -0,0 +1,194 @@ ++/* ++ * mcfuart.h -- ColdFire internal UART support defines. ++ * ++ * Matt Waddel Matt.Waddel@freescale.com ++ * Copyright Freescale Semiconductor, Inc. 2007 ++ * ++ * Derived from m68knommu version of this same file (Greg Ungerer & Lineo). ++ * ++ */ ++ ++#ifndef mcfuart_h ++#define mcfuart_h ++ ++/* ++ * Define the base address of the UARTS within the MBAR address ++ * space. ++ */ ++#if defined(CONFIG_M5445X) ++#include <asm/mcf5445x_intc.h> ++#define MCFUART_BASE1 0xfc060000 /* Base address of UART1 */ ++#define MCFUART_BASE2 0xfc064000 /* Base address of UART2 */ ++#define MCFUART_BASE3 0xfc068000 /* Base address of UART3 */ ++#define MCFINT_VECBASE 64 ++#define MCFINT_UART0 26 ++ ++#elif defined(CONFIG_M547X_8X) ++ ++#define MCFUART_BASE1 0x8600 /* Base address of UART1 */ ++#define MCFUART_BASE2 0x8700 /* Base address of UART2 */ ++#define MCFUART_BASE3 0x8800 /* Base address of UART3 */ ++#define MCFUART_BASE4 0x8900 /* Base address of UART4 */ ++#define MCFINT_VECBASE 64 ++#define MCFINT_UART0 35 ++#endif ++ ++ ++/* ++ * Define the ColdFire UART register set addresses. ++ */ ++#define MCFUART_UMR 0x00 /* Mode register (r/w) */ ++#define MCFUART_USR 0x04 /* Status register (r) */ ++#define MCFUART_UCSR 0x04 /* Clock Select (w) */ ++#define MCFUART_UCR 0x08 /* Command register (w) */ ++#define MCFUART_URB 0x0c /* Receiver Buffer (r) */ ++#define MCFUART_UTB 0x0c /* Transmit Buffer (w) */ ++#define MCFUART_UIPCR 0x10 /* Input Port Change (r) */ ++#define MCFUART_UACR 0x10 /* Auxiliary Control (w) */ ++#define MCFUART_UISR 0x14 /* Interrup Status (r) */ ++#define MCFUART_UIMR 0x14 /* Interrupt Mask (w) */ ++#define MCFUART_UBG1 0x18 /* Baud Rate MSB (r/w) */ ++#define MCFUART_UBG2 0x1c /* Baud Rate LSB (r/w) */ ++#ifdef CONFIG_M5272 ++#define MCFUART_UTF 0x28 /* Transmitter FIFO (r/w) */ ++#define MCFUART_URF 0x2c /* Receiver FIFO (r/w) */ ++#define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */ ++#else ++#define MCFUART_UIVR 0x30 /* Interrupt Vector (r/w) */ ++#endif ++#define MCFUART_UIPR 0x34 /* Input Port (r) */ ++#define MCFUART_UOP1 0x38 /* Output Port Bit Set (w) */ ++#define MCFUART_UOP0 0x3c /* Output Port Bit Reset (w) */ ++ ++ ++/* ++ * Define bit flags in Mode Register 1 (MR1). ++ */ ++#define MCFUART_MR1_RXRTS 0x80 /* Auto RTS flow control */ ++#define MCFUART_MR1_RXIRQFULL 0x40 /* RX IRQ type FULL */ ++#define MCFUART_MR1_RXIRQRDY 0x00 /* RX IRQ type RDY */ ++#define MCFUART_MR1_RXERRBLOCK 0x20 /* RX block error mode */ ++#define MCFUART_MR1_RXERRCHAR 0x00 /* RX char error mode */ ++ ++#define MCFUART_MR1_PARITYNONE 0x10 /* No parity */ ++#define MCFUART_MR1_PARITYEVEN 0x00 /* Even parity */ ++#define MCFUART_MR1_PARITYODD 0x04 /* Odd parity */ ++#define MCFUART_MR1_PARITYSPACE 0x08 /* Space parity */ ++#define MCFUART_MR1_PARITYMARK 0x0c /* Mark parity */ ++ ++#define MCFUART_MR1_CS5 0x00 /* 5 bits per char */ ++#define MCFUART_MR1_CS6 0x01 /* 6 bits per char */ ++#define MCFUART_MR1_CS7 0x02 /* 7 bits per char */ ++#define MCFUART_MR1_CS8 0x03 /* 8 bits per char */ ++ ++/* ++ * Define bit flags in Mode Register 2 (MR2). ++ */ ++#define MCFUART_MR2_LOOPBACK 0x80 /* Loopback mode */ ++#define MCFUART_MR2_REMOTELOOP 0xc0 /* Remote loopback mode */ ++#define MCFUART_MR2_AUTOECHO 0x40 /* Automatic echo */ ++#define MCFUART_MR2_TXRTS 0x20 /* Assert RTS on TX */ ++#define MCFUART_MR2_TXCTS 0x10 /* Auto CTS flow control */ ++ ++#define MCFUART_MR2_STOP1 0x07 /* 1 stop bit */ ++#define MCFUART_MR2_STOP15 0x08 /* 1.5 stop bits */ ++#define MCFUART_MR2_STOP2 0x0f /* 2 stop bits */ ++ ++/* ++ * Define bit flags in Status Register (USR). ++ */ ++#define MCFUART_USR_RXBREAK 0x80 /* Received BREAK */ ++#define MCFUART_USR_RXFRAMING 0x40 /* Received framing error */ ++#define MCFUART_USR_RXPARITY 0x20 /* Received parity error */ ++#define MCFUART_USR_RXOVERRUN 0x10 /* Received overrun error */ ++#define MCFUART_USR_TXEMPTY 0x08 /* Transmitter empty */ ++#define MCFUART_USR_TXREADY 0x04 /* Transmitter ready */ ++#define MCFUART_USR_RXFULL 0x02 /* Receiver full */ ++#define MCFUART_USR_RXREADY 0x01 /* Receiver ready */ ++ ++#if defined(CONFIG_M547X_8X) ++#define MCFUART_USR_TXREADY_BN 0x0a ++#define MCFUART_USR_TXEMPTY_BN 0x0b ++#endif ++ ++#define MCFUART_USR_RXERR (MCFUART_USR_RXBREAK | MCFUART_USR_RXFRAMING | \ ++ MCFUART_USR_RXPARITY | MCFUART_USR_RXOVERRUN) ++ ++/* ++ * Define bit flags in Clock Select Register (UCSR). ++ */ ++#define MCFUART_UCSR_RXCLKTIMER 0xd0 /* RX clock is timer */ ++#define MCFUART_UCSR_RXCLKEXT16 0xe0 /* RX clock is external x16 */ ++#define MCFUART_UCSR_RXCLKEXT1 0xf0 /* RX clock is external x1 */ ++ ++#define MCFUART_UCSR_TXCLKTIMER 0x0d /* TX clock is timer */ ++#define MCFUART_UCSR_TXCLKEXT16 0x0e /* TX clock is external x16 */ ++#define MCFUART_UCSR_TXCLKEXT1 0x0f /* TX clock is external x1 */ ++ ++/* ++ * Define bit flags in Command Register (UCR). ++ */ ++#define MCFUART_UCR_CMDNULL 0x00 /* No command */ ++#define MCFUART_UCR_CMDRESETMRPTR 0x10 /* Reset MR pointer */ ++#define MCFUART_UCR_CMDRESETRX 0x20 /* Reset receiver */ ++#define MCFUART_UCR_CMDRESETTX 0x30 /* Reset transmitter */ ++#define MCFUART_UCR_CMDRESETERR 0x40 /* Reset error status */ ++#define MCFUART_UCR_CMDRESETBREAK 0x50 /* Reset BREAK change */ ++#define MCFUART_UCR_CMDBREAKSTART 0x60 /* Start BREAK */ ++#define MCFUART_UCR_CMDBREAKSTOP 0x70 /* Stop BREAK */ ++ ++#define MCFUART_UCR_TXNULL 0x00 /* No TX command */ ++#define MCFUART_UCR_TXENABLE 0x04 /* Enable TX */ ++#define MCFUART_UCR_TXDISABLE 0x08 /* Disable TX */ ++#define MCFUART_UCR_RXNULL 0x00 /* No RX command */ ++#define MCFUART_UCR_RXENABLE 0x01 /* Enable RX */ ++#define MCFUART_UCR_RXDISABLE 0x02 /* Disable RX */ ++ ++/* ++ * Define bit flags in Input Port Change Register (UIPCR). ++ */ ++#define MCFUART_UIPCR_CTSCOS 0x10 /* CTS change of state */ ++#define MCFUART_UIPCR_CTS 0x01 /* CTS value */ ++ ++/* ++ * Define bit flags in Input Port Register (UIP). ++ */ ++#define MCFUART_UIPR_CTS 0x01 /* CTS value */ ++ ++/* ++ * Define bit flags in Output Port Registers (UOP). ++ * Clear bit by writing to UOP0, set by writing to UOP1. ++ */ ++#define MCFUART_UOP_RTS 0x01 /* RTS set or clear */ ++ ++/* ++ * Define bit flags in the Auxiliary Control Register (UACR). ++ */ ++#define MCFUART_UACR_IEC 0x01 /* Input enable control */ ++ ++/* ++ * Define bit flags in Interrupt Status Register (UISR). ++ * These same bits are used for the Interrupt Mask Register (UIMR). ++ */ ++#define MCFUART_UIR_COS 0x80 /* Change of state (CTS) */ ++#define MCFUART_UIR_DELTABREAK 0x04 /* Break start or stop */ ++#define MCFUART_UIR_RXREADY 0x02 /* Receiver ready */ ++#define MCFUART_UIR_TXREADY 0x01 /* Transmitter ready */ ++ ++#ifdef CONFIG_M5272 ++/* ++ * Define bit flags in the Transmitter FIFO Register (UTF). ++ */ ++#define MCFUART_UTF_TXB 0x1f /* Transmitter data level */ ++#define MCFUART_UTF_FULL 0x20 /* Transmitter fifo full */ ++#define MCFUART_UTF_TXS 0xc0 /* Transmitter status */ ++ ++/* ++ * Define bit flags in the Receiver FIFO Register (URF). ++ */ ++#define MCFUART_URF_RXB 0x1f /* Receiver data level */ ++#define MCFUART_URF_FULL 0x20 /* Receiver fifo full */ ++#define MCFUART_URF_RXS 0xc0 /* Receiver status */ ++#endif ++ ++#endif /* mcfuart_h */ +--- a/include/asm-m68k/mmu_context.h ++++ b/include/asm-m68k/mmu_context.h +@@ -7,7 +7,7 @@ static inline void enter_lazy_tlb(struct + { + } + +-#ifndef CONFIG_SUN3 ++#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE) + + #include <asm/setup.h> + #include <asm/page.h> +@@ -102,7 +102,7 @@ static inline void activate_mm(struct mm + switch_mm_0460(next_mm); + } + +-#else /* CONFIG_SUN3 */ ++#elif defined(CONFIG_SUN3) + #include <asm/sun3mmu.h> + #include <linux/sched.h> + +@@ -150,5 +150,155 @@ static inline void activate_mm(struct mm + activate_context(next_mm); + } + +-#endif ++#else /* CONFIG_COLDFIRE */ ++ ++#include <asm/coldfire.h> ++#include <asm/atomic.h> ++#include <asm/bitops.h> ++#include <asm/mmu.h> ++ ++#define NO_CONTEXT 256 ++#define LAST_CONTEXT 255 ++#define FIRST_CONTEXT 1 ++ ++extern void set_context(mm_context_t context, pgd_t *pgd); ++extern unsigned long context_map[]; ++extern mm_context_t next_mmu_context; ++ ++extern atomic_t nr_free_contexts; ++extern struct mm_struct *context_mm[LAST_CONTEXT+1]; ++extern void steal_context(void); ++ ++static inline void get_mmu_context(struct mm_struct *mm) ++{ ++ mm_context_t ctx; ++ ++ if (mm->context != NO_CONTEXT) ++ return; ++ while (atomic_dec_and_test_lt(&nr_free_contexts)) { ++ atomic_inc(&nr_free_contexts); ++ steal_context(); ++ } ++ ctx = next_mmu_context; ++ while (test_and_set_bit(ctx, context_map)) { ++ ctx = find_next_zero_bit(context_map, LAST_CONTEXT+1, ctx); ++ if (ctx > LAST_CONTEXT) ++ ctx = 0; ++ } ++ next_mmu_context = (ctx + 1) & LAST_CONTEXT; ++ mm->context = ctx; ++ context_mm[ctx] = mm; ++} ++ ++/* ++ * Set up the context for a new address space. ++ */ ++#define init_new_context(tsk, mm) (((mm)->context = NO_CONTEXT), 0) ++ ++/* ++ * We're finished using the context for an address space. ++ */ ++static inline void destroy_context(struct mm_struct *mm) ++{ ++ if (mm->context != NO_CONTEXT) { ++ clear_bit(mm->context, context_map); ++ mm->context = NO_CONTEXT; ++ atomic_inc(&nr_free_contexts); ++ } ++} ++ ++static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, ++ struct task_struct *tsk) ++{ ++ get_mmu_context(tsk->mm); ++ set_context(tsk->mm->context, next->pgd); ++} ++ ++/* ++ * After we have set current->mm to a new value, this activates ++ * the context for the new mm so we see the new mappings. ++ */ ++static inline void activate_mm(struct mm_struct *active_mm, ++ struct mm_struct *mm) ++{ ++ get_mmu_context(mm); ++ set_context(mm->context, mm->pgd); ++} ++ ++#define deactivate_mm(tsk, mm) do { } while (0) ++ ++extern void mmu_context_init(void); ++#if defined(CONFIG_M547X_8X) ++#define prepare_arch_switch(next) load_ksp_mmu(next) ++ ++static inline void load_ksp_mmu(struct task_struct *task) ++{ ++ int flags; ++ struct mm_struct *mm; ++ int asid; ++ pgd_t *pgd; ++ pmd_t *pmd; ++ pte_t *pte; ++ unsigned long mmuar; ++ ++ local_irq_save(flags); ++ mmuar = task->thread.ksp; ++ ++ /* Search for a valid TLB entry, if one is found, don't remap */ ++ *MMUAR = mmuar; ++ *MMUOR = MMUOR_STLB | MMUOR_ADR; ++ if ((*MMUSR) & MMUSR_HIT) ++ goto end; ++ ++ if (mmuar >= PAGE_OFFSET) { ++ mm = &init_mm; ++ } else { ++ printk ("load_ksp_mmu: non-kernel mm found: 0x%08x\n", (unsigned int) task->mm); ++ mm = task->mm; ++ } ++ ++ if (!mm) ++ goto bug; ++ ++ pgd = pgd_offset(mm, mmuar); ++ if (pgd_none(*pgd)) ++ goto bug; ++ ++ pmd = pmd_offset(pgd, mmuar); ++ if (pmd_none(*pmd)) ++ goto bug; ++ ++ pte = (mmuar >= PAGE_OFFSET) ? pte_offset_kernel(pmd, mmuar) ++ : pte_offset_map(pmd, mmuar); ++ if (pte_none(*pte) || !pte_present(*pte)) ++ goto bug; ++ ++ set_pte(pte, pte_mkyoung(*pte)); ++ asid = mm->context & 0xff; ++ if (!pte_dirty(*pte) && mmuar<=PAGE_OFFSET) ++ set_pte(pte, pte_wrprotect(*pte)); ++ ++ *MMUTR = (mmuar & PAGE_MASK) | (asid << CF_ASID_MMU_SHIFT) ++ | (((int)(pte->pte) & (int)CF_PAGE_MMUTR_MASK ) >> CF_PAGE_MMUTR_SHIFT) ++ | MMUTR_V; ++ ++ *MMUDR = (pte_val(*pte) & PAGE_MASK) ++ | ((pte->pte) & CF_PAGE_MMUDR_MASK) ++ | MMUDR_SZ8K | MMUDR_X; ++ ++ *MMUOR = MMUOR_ACC | MMUOR_UAA; ++ asm ("nop"); ++ ++ goto end; ++ ++bug: ++ printk ("ksp load failed: mm=0x%08x ksp=0x%08x\n", (unsigned int) mm, (unsigned int) mmuar); ++ ++end: ++ local_irq_restore(flags); ++} ++ ++#endif /* CONFIG_M547X_8X */ ++ ++#endif /* CONFIG_COLDFIRE */ + #endif +--- a/include/asm-m68k/page.h ++++ b/include/asm-m68k/page.h +@@ -4,7 +4,7 @@ + #include <linux/const.h> + + /* PAGE_SHIFT determines the page size */ +-#ifndef CONFIG_SUN3 ++#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE) + #define PAGE_SHIFT (12) + #else + #define PAGE_SHIFT (13) +@@ -116,10 +116,31 @@ typedef struct page *pgtable_t; + + extern unsigned long m68k_memoffset; + +-#ifndef CONFIG_SUN3 ++#if !defined(CONFIG_SUN3) + + #define WANT_PAGE_VIRTUAL + ++#if defined(CONFIG_COLDFIRE) ++static inline unsigned long ___pa(void *vaddr) ++{ ++#if CONFIG_SDRAM_BASE != PAGE_OFFSET ++ return (((unsigned long)vaddr & 0x0fffffff) + CONFIG_SDRAM_BASE); ++#else ++ return (unsigned long)vaddr; ++#endif ++} ++#define __pa(vaddr) ___pa((void *)(vaddr)) ++ ++static inline void *__va(unsigned long paddr) ++{ ++#if CONFIG_SDRAM_BASE != PAGE_OFFSET ++ return (void *)((paddr & 0x0fffffff) + PAGE_OFFSET); ++#else ++ return (void *)paddr; ++#endif ++} ++ ++#else + static inline unsigned long ___pa(void *vaddr) + { + unsigned long paddr; +@@ -141,6 +162,7 @@ static inline void *__va(unsigned long p + : "0" (paddr), "i" (m68k_fixup_memoffset)); + return vaddr; + } ++#endif + + #else /* !CONFIG_SUN3 */ + /* This #define is a horrible hack to suppress lots of warnings. --m */ +@@ -172,6 +194,8 @@ static inline void *__va(unsigned long x + * memory node, but we have no highmem, so that works for now. + * TODO: implement (fast) pfn<->pgdat_idx conversion functions, this makes lots + * of the shifts unnecessary. ++ * ++ * PFNs are used to map physical pages. So PFN[0] maps to the base phys addr. + */ + #define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT) + #define pfn_to_virt(pfn) __va((pfn) << PAGE_SHIFT) +@@ -228,4 +252,9 @@ static inline __attribute_const__ int __ + + #include <asm-generic/page.h> + ++#ifdef CONFIG_VSYSCALL ++/* vDSO support */ ++#define __HAVE_ARCH_GATE_AREA ++#endif ++ + #endif /* _M68K_PAGE_H */ +--- a/include/asm-m68k/page_offset.h ++++ b/include/asm-m68k/page_offset.h +@@ -1,8 +1,15 @@ ++/* ++ * Page and physical memory maps. ++ */ ++#if defined(CONFIG_SUN3) ++#define PAGE_OFFSET_RAW 0x0E000000 ++ ++#elif defined(CONFIG_M5445X) || defined(CONFIG_M547X_8X) ++#define PHYS_OFFSET CONFIG_SDRAM_BASE ++#define PAGE_OFFSET_RAW (PHYS_OFFSET) ++/* #define PAGE_OFFSET_RAW 0xC0000000 */ + +-/* This handles the memory map.. */ +-#ifndef CONFIG_SUN3 +-#define PAGE_OFFSET_RAW 0x00000000 + #else +-#define PAGE_OFFSET_RAW 0x0E000000 ++/* default */ ++#define PAGE_OFFSET_RAW 0x00000000 + #endif +- +--- a/include/asm-m68k/pci.h ++++ b/include/asm-m68k/pci.h +@@ -1,57 +1,10 @@ +-#ifndef _ASM_M68K_PCI_H +-#define _ASM_M68K_PCI_H ++#ifndef M68K_PCI_H ++#define M68K_PCI_H + +-/* +- * asm-m68k/pci_m68k.h - m68k specific PCI declarations. +- * +- * Written by Wout Klaren. +- */ ++#ifdef CONFIG_M5445X ++#include "5445x_pci.h" ++#else ++#include "548x_pci.h" ++#endif + +-#include <asm/scatterlist.h> +- +-struct pci_ops; +- +-/* +- * Structure with hardware dependent information and functions of the +- * PCI bus. +- */ +- +-struct pci_bus_info +-{ +- /* +- * Resources of the PCI bus. +- */ +- +- struct resource mem_space; +- struct resource io_space; +- +- /* +- * System dependent functions. +- */ +- +- struct pci_ops *m68k_pci_ops; +- +- void (*fixup)(int pci_modify); +- void (*conf_device)(struct pci_dev *dev); +-}; +- +-#define pcibios_assign_all_busses() 0 +-#define pcibios_scan_all_fns(a, b) 0 +- +-static inline void pcibios_set_master(struct pci_dev *dev) +-{ +- /* No special bus mastering setup handling */ +-} +- +-static inline void pcibios_penalize_isa_irq(int irq, int active) +-{ +- /* We don't do dynamic PCI IRQ allocation */ +-} +- +-/* The PCI address space does equal the physical memory +- * address space. The networking and block device layers use +- * this boolean for bounce buffer decisions. +- */ +-#define PCI_DMA_BUS_IS_PHYS (1) +- +-#endif /* _ASM_M68K_PCI_H */ ++#endif /* M68K_PCI_H */ +--- a/include/asm-m68k/pgalloc.h ++++ b/include/asm-m68k/pgalloc.h +@@ -8,8 +8,10 @@ + #include <asm/virtconvert.h> + + +-#ifdef CONFIG_SUN3 ++#if defined(CONFIG_SUN3) + #include <asm/sun3_pgalloc.h> ++#elif defined(CONFIG_COLDFIRE) ++#include <asm/cf_pgalloc.h> + #else + #include <asm/motorola_pgalloc.h> + #endif +--- a/include/asm-m68k/pgtable.h ++++ b/include/asm-m68k/pgtable.h +@@ -40,6 +40,8 @@ + /* PGDIR_SHIFT determines what a third-level page table entry can map */ + #ifdef CONFIG_SUN3 + #define PGDIR_SHIFT 17 ++#elif defined(CONFIG_COLDFIRE) ++#define PGDIR_SHIFT 22 + #else + #define PGDIR_SHIFT 25 + #endif +@@ -54,6 +56,10 @@ + #define PTRS_PER_PTE 16 + #define PTRS_PER_PMD 1 + #define PTRS_PER_PGD 2048 ++#elif defined(CONFIG_COLDFIRE) ++#define PTRS_PER_PTE 512 ++#define PTRS_PER_PMD 1 ++#define PTRS_PER_PGD 1024 + #else + #define PTRS_PER_PTE 1024 + #define PTRS_PER_PMD 8 +@@ -66,6 +72,11 @@ + #ifdef CONFIG_SUN3 + #define KMAP_START 0x0DC00000 + #define KMAP_END 0x0E000000 ++#elif defined(CONFIG_COLDFIRE) ++#define VMALLOC_START 0xc0000000 ++#define VMALLOC_END 0xcfffffff ++#define KMAP_START (VMALLOC_END + 1) ++#define KMAP_END 0xe0000000 + #else + #define KMAP_START 0xd0000000 + #define KMAP_END 0xf0000000 +@@ -79,9 +90,11 @@ + * The vmalloc() routines leaves a hole of 4kB between each vmalloced + * area for the same reason. ;) + */ ++#if !defined(CONFIG_COLDFIRE) + #define VMALLOC_OFFSET (8*1024*1024) + #define VMALLOC_START (((unsigned long) high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)) + #define VMALLOC_END KMAP_START ++#endif + #else + extern unsigned long vmalloc_end; + #define VMALLOC_START 0x0f800000 +@@ -130,6 +143,8 @@ static inline void update_mmu_cache(stru + + #ifdef CONFIG_SUN3 + #include <asm/sun3_pgtable.h> ++#elif defined(CONFIG_COLDFIRE) ++#include <asm/cf_pgtable.h> + #else + #include <asm/motorola_pgtable.h> + #endif +@@ -140,6 +155,9 @@ static inline void update_mmu_cache(stru + /* + * Macro to mark a page protection value as "uncacheable". + */ ++#ifdef CONFIG_COLDFIRE ++# define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) | CF_PAGE_NOCACHE)) ++#else /* CONFIG_COLDFIRE */ + #ifdef SUN3_PAGE_NOCACHE + # define __SUN3_PAGE_NOCACHE SUN3_PAGE_NOCACHE + #else +@@ -154,6 +172,7 @@ static inline void update_mmu_cache(stru + ? (__pgprot((pgprot_val(prot) & _CACHEMASK040) | _PAGE_NOCACHE_S)) \ + : (prot))) + ++#endif /* CONFIG_COLDFIRE */ + #endif /* !__ASSEMBLY__ */ + + /* +--- a/include/asm-m68k/processor.h ++++ b/include/asm-m68k/processor.h +@@ -22,24 +22,38 @@ static inline unsigned long rdusp(void) + { + unsigned long usp; + ++#ifndef CONFIG_COLDFIRE + __asm__ __volatile__("move %/usp,%0" : "=a" (usp)); ++#else ++ __asm__ __volatile__("movel %/usp,%0" : "=a" (usp)); ++#endif + return usp; + } + + static inline void wrusp(unsigned long usp) + { ++#ifndef CONFIG_COLDFIRE + __asm__ __volatile__("move %0,%/usp" : : "a" (usp)); ++#else ++ __asm__ __volatile__("movel %0,%/usp" : : "a" (usp)); ++#endif + } + + /* + * User space process size: 3.75GB. This is hardcoded into a few places, + * so don't change it unless you know what you are doing. + */ +-#ifndef CONFIG_SUN3 ++#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE) + #define TASK_SIZE (0xF0000000UL) ++#elif defined(CONFIG_COLDFIRE) ++#define TASK_SIZE (0xC0000000UL) ++#else /* CONFIG_SUN3 */ ++#ifdef __ASSEMBLY__ ++#define TASK_SIZE (0x0E000000) + #else + #define TASK_SIZE (0x0E000000UL) + #endif ++#endif + + #ifdef __KERNEL__ + #define STACK_TOP TASK_SIZE +@@ -49,9 +63,11 @@ static inline void wrusp(unsigned long u + /* This decides where the kernel will search for a free chunk of vm + * space during mmap's. + */ +-#ifndef CONFIG_SUN3 +-#define TASK_UNMAPPED_BASE 0xC0000000UL +-#else ++#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE) ++#define TASK_UNMAPPED_BASE 0xC0000000UL ++#elif defined(CONFIG_COLDFIRE) ++#define TASK_UNMAPPED_BASE 0x80000000UL ++#else /* CONFIG_SUN3 */ + #define TASK_UNMAPPED_BASE 0x0A000000UL + #endif + #define TASK_UNMAPPED_ALIGN(addr, off) PAGE_ALIGN(addr) +@@ -60,7 +76,11 @@ struct thread_struct { + unsigned long ksp; /* kernel stack pointer */ + unsigned long usp; /* user stack pointer */ + unsigned short sr; /* saved status register */ ++#ifndef CONFIG_COLDFIRE + unsigned short fs; /* saved fs (sfc, dfc) */ ++#else ++ mm_segment_t fs; ++#endif + unsigned long crp[2]; /* cpu root pointer */ + unsigned long esp0; /* points to SR of stack frame */ + unsigned long faddr; /* info about last fault */ +@@ -81,6 +101,7 @@ struct thread_struct { + /* + * Do necessary setup to start up a newly executed thread. + */ ++#ifndef CONFIG_COLDFIRE + static inline void start_thread(struct pt_regs * regs, unsigned long pc, + unsigned long usp) + { +@@ -91,6 +112,23 @@ static inline void start_thread(struct p + regs->sr &= ~0x2000; + wrusp(usp); + } ++#else ++/* ++ * Do necessary setup to start up a newly executed thread. ++ * ++ * pass the data segment into user programs if it exists, ++ * it can't hurt anything as far as I can tell ++ */ ++#define start_thread(_regs, _pc, _usp) \ ++do { \ ++ set_fs(USER_DS); /* reads from user space */ \ ++ (_regs)->pc = (_pc); \ ++ if (current->mm) \ ++ (_regs)->d5 = current->mm->start_data; \ ++ (_regs)->sr &= ~0x2000; \ ++ wrusp(_usp); \ ++} while (0) ++#endif + + /* Forward declaration, a strange C thing */ + struct task_struct; +--- a/include/asm-m68k/ptrace.h ++++ b/include/asm-m68k/ptrace.h +@@ -38,10 +38,21 @@ struct pt_regs { + long d0; + long orig_d0; + long stkadj; ++#ifndef CONFIG_COLDFIRE + unsigned short sr; + unsigned long pc; + unsigned format : 4; /* frame format specifier */ + unsigned vector : 12; /* vector offset */ ++#else ++ unsigned long mmuar; ++ unsigned long mmusr; ++ unsigned format : 4; /* frame format specifier */ ++ unsigned fs2 : 2; ++ unsigned vector: 8; ++ unsigned fs1 : 2; ++ unsigned short sr; ++ unsigned long pc; ++#endif + }; + + /* +--- a/include/asm-m68k/raw_io.h ++++ b/include/asm-m68k/raw_io.h +@@ -46,6 +46,29 @@ extern void __iounmap(void *addr, unsign + #define out_le16(addr,w) (void)((*(__force volatile __le16 *) (addr)) = cpu_to_le16(w)) + #define out_le32(addr,l) (void)((*(__force volatile __le32 *) (addr)) = cpu_to_le32(l)) + ++#if (defined CONFIG_COLDFIRE) && (defined CONFIG_PCI) ++unsigned char pci_inb(long addr); ++unsigned short pci_inw(long addr); ++unsigned long pci_inl(long addr); ++void pci_outb(unsigned char val, long addr); ++void pci_outw(unsigned short val, long addr); ++void pci_outl(unsigned long val, long addr); ++unsigned short pci_raw_inw(long addr); ++unsigned long pci_raw_inl(long addr); ++void pci_raw_outw(unsigned short val, long addr); ++void pci_raw_outl(unsigned long val, long addr); ++#define raw_inb(port) pci_inb((long)((volatile unsigned char *)(port))) ++#define raw_inw(port) pci_raw_inw((long)((volatile unsigned short *)(port))) ++#define raw_inl(port) pci_raw_inl((long)((volatile unsigned long *)(port))) ++ ++#define raw_outb(val,port) pci_outb((val),(long)((volatile unsigned char *)(port))) ++#define raw_outw(val,port) pci_raw_outw((val),(long)((volatile unsigned short *)(port))) ++#define raw_outl(val,port) pci_raw_outl((val),(long)((volatile unsigned long *)(port))) ++ ++#define swap_inw(port) pci_inw((long)((volatile unsigned short *)(port))) ++#define swap_outw(val,port) pci_outw((val),(long)((volatile unsigned short *)(port))) ++ ++#else + #define raw_inb in_8 + #define raw_inw in_be16 + #define raw_inl in_be32 +@@ -60,6 +83,9 @@ extern void __iounmap(void *addr, unsign + #define __raw_writew(val,addr) out_be16((addr),(val)) + #define __raw_writel(val,addr) out_be32((addr),(val)) + ++#define swap_inw(port) in_le16((port)) ++#define swap_outw(val,port) out_le16((port),(val)) ++#endif + static inline void raw_insb(volatile u8 __iomem *port, u8 *buf, unsigned int len) + { + unsigned int i; +@@ -77,6 +103,7 @@ static inline void raw_outsb(volatile u8 + out_8(port, *buf++); + } + ++#ifndef CONFIG_COLDFIRE + static inline void raw_insw(volatile u16 __iomem *port, u16 *buf, unsigned int nr) + { + unsigned int tmp; +@@ -342,6 +369,63 @@ static inline void raw_outsw_swapw(volat + : "d0", "a0", "a1", "d6"); + } + ++ ++#else /*CONFIG_COLDFIRE */ ++ ++static inline void raw_insw(volatile u16 *port, u16 *buf, unsigned int nr) ++{ ++ unsigned int i; ++ ++ for (i = 0; i < nr; i++) ++ *buf++ = raw_inw(port); ++} ++ ++static inline void raw_outsw(volatile u16 *port, const u16 *buf, ++ unsigned int nr) ++{ ++ unsigned int i; ++ ++ for (i = 0; i < nr; i++, buf++) ++ raw_outw(*buf, port); ++} ++ ++static inline void raw_insl(volatile u32 *port, u32 *buf, unsigned int nr) ++{ ++ unsigned int i; ++ ++ for (i = 0; i < nr; i++) ++ *buf++ = raw_inl(port); ++} ++ ++static inline void raw_outsl(volatile u32 *port, const u32 *buf, ++ unsigned int nr) ++{ ++ unsigned int i; ++ ++ for (i = 0; i < nr; i++, buf++) ++ raw_outl(*buf, port); ++} ++ ++static inline void raw_insw_swapw(volatile u16 *port, u16 *buf, ++ unsigned int nr) ++{ ++ unsigned int i; ++ ++ for (i = 0; i < nr; i++) ++ *buf++ = in_le16(port); ++ ++} ++ ++static inline void raw_outsw_swapw(volatile u16 __iomem *port, const u16 *buf, ++ unsigned int nr) ++{ ++ unsigned int i; ++ ++ for (i = 0; i < nr; i++, buf++) ++ out_le16(port, *buf); ++} ++#endif /*CONFIG_COLDFIRE */ ++ + #endif /* __KERNEL__ */ + + #endif /* _RAW_IO_H */ +--- a/include/asm-m68k/segment.h ++++ b/include/asm-m68k/segment.h +@@ -29,6 +29,7 @@ typedef struct { + * Get/set the SFC/DFC registers for MOVES instructions + */ + ++#ifndef CONFIG_COLDFIRE + static inline mm_segment_t get_fs(void) + { + mm_segment_t _v; +@@ -50,6 +51,15 @@ static inline void set_fs(mm_segment_t v + : /* no outputs */ : "r" (val.seg) : "memory"); + } + ++#else /* CONFIG_COLDFIRE */ ++ ++#include <asm/current.h> ++#define get_fs() (current->thread.fs) ++#define set_fs(val) (current->thread.fs = (val)) ++#define get_ds() (KERNEL_DS) ++ ++#endif /* CONFIG_COLDFIRE */ ++ + #define segment_eq(a,b) ((a).seg == (b).seg) + + #endif /* __ASSEMBLY__ */ +--- a/include/asm-m68k/setup.h ++++ b/include/asm-m68k/setup.h +@@ -40,6 +40,7 @@ + #define MACH_HP300 9 + #define MACH_Q40 10 + #define MACH_SUN3X 11 ++#define MACH_CFMMU 12 + + #define COMMAND_LINE_SIZE 256 + +@@ -189,6 +190,14 @@ extern unsigned long m68k_machtype; + # define MACH_TYPE (MACH_SUN3X) + #endif + ++#if !defined(CONFIG_COLDFIRE) ++# define MACH_IS_COLDFIRE (0) ++#else ++# define CONFIG_COLDFIRE_ONLY ++# define MACH_IS_COLDFIRE (1) ++# define MACH_TYPE (MACH_CFMMU) ++#endif ++ + #ifndef MACH_TYPE + # define MACH_TYPE (m68k_machtype) + #endif +@@ -211,23 +220,31 @@ extern unsigned long m68k_machtype; + #define CPUB_68030 1 + #define CPUB_68040 2 + #define CPUB_68060 3 ++#define CPUB_CFV4E 4 + + #define CPU_68020 (1<<CPUB_68020) + #define CPU_68030 (1<<CPUB_68030) + #define CPU_68040 (1<<CPUB_68040) + #define CPU_68060 (1<<CPUB_68060) ++#define CPU_CFV4E (1<<CPUB_CFV4E) + + #define FPUB_68881 0 + #define FPUB_68882 1 + #define FPUB_68040 2 /* Internal FPU */ + #define FPUB_68060 3 /* Internal FPU */ + #define FPUB_SUNFPA 4 /* Sun-3 FPA */ ++#define FPUB_CFV4E 5 + + #define FPU_68881 (1<<FPUB_68881) + #define FPU_68882 (1<<FPUB_68882) + #define FPU_68040 (1<<FPUB_68040) + #define FPU_68060 (1<<FPUB_68060) + #define FPU_SUNFPA (1<<FPUB_SUNFPA) ++#ifndef CONFIG_M5445X ++#define FPU_CFV4E (1<<FPUB_CFV4E) ++#else ++#define FPU_CFV4E 0 ++#endif + + #define MMUB_68851 0 + #define MMUB_68030 1 /* Internal MMU */ +@@ -235,6 +252,7 @@ extern unsigned long m68k_machtype; + #define MMUB_68060 3 /* Internal MMU */ + #define MMUB_APOLLO 4 /* Custom Apollo */ + #define MMUB_SUN3 5 /* Custom Sun-3 */ ++#define MMUB_CFV4E 6 + + #define MMU_68851 (1<<MMUB_68851) + #define MMU_68030 (1<<MMUB_68030) +@@ -242,6 +260,7 @@ extern unsigned long m68k_machtype; + #define MMU_68060 (1<<MMUB_68060) + #define MMU_SUN3 (1<<MMUB_SUN3) + #define MMU_APOLLO (1<<MMUB_APOLLO) ++#define MMU_CFV4E (1<<MMUB_CFV4E) + + #ifdef __KERNEL__ + +@@ -341,6 +360,14 @@ extern int m68k_is040or060; + # endif + #endif + ++#if !defined(CONFIG_CFV4E) ++# define CPU_IS_COLDFIRE (0) ++#else ++# define CPU_IS_COLDFIRE (1) ++# define CPU_IS_CFV4E (1) ++# define MMU_IS_CFV4E (1) ++#endif ++ + #define CPU_TYPE (m68k_cputype) + + #ifdef CONFIG_M68KFPU_EMU +--- a/include/asm-m68k/signal.h ++++ b/include/asm-m68k/signal.h +@@ -150,6 +150,7 @@ typedef struct sigaltstack { + #ifdef __KERNEL__ + #include <asm/sigcontext.h> + ++#ifndef CONFIG_COLDFIRE + #define __HAVE_ARCH_SIG_BITOPS + + static inline void sigaddset(sigset_t *set, int _sig) +@@ -200,6 +201,10 @@ static inline int sigfindinword(unsigned + + struct pt_regs; + extern void ptrace_signal_deliver(struct pt_regs *regs, void *cookie); ++#else ++ ++#define ptrace_signal_deliver(regs, cookie) do { } while (0) ++#endif /* CONFIG_COLDFIRE */ + + #endif /* __KERNEL__ */ + +--- a/include/asm-m68k/string.h ++++ b/include/asm-m68k/string.h +@@ -93,6 +93,7 @@ static inline char *strchr(const char *s + return (char *)s - 1; + } + ++#ifndef CONFIG_COLDFIRE + #define __HAVE_ARCH_STRCMP + static inline int strcmp(const char *cs, const char *ct) + { +@@ -110,6 +111,7 @@ static inline int strcmp(const char *cs, + : "+a" (cs), "+a" (ct), "=d" (res)); + return res; + } ++#endif + + #define __HAVE_ARCH_MEMSET + extern void *memset(void *, int, __kernel_size_t); +--- a/include/asm-m68k/system.h ++++ b/include/asm-m68k/system.h +@@ -5,9 +5,24 @@ + #include <linux/kernel.h> + #include <asm/segment.h> + #include <asm/entry.h> ++#include <asm/cfcache.h> + + #ifdef __KERNEL__ + ++#ifdef CONFIG_COLDFIRE ++#define FLUSH_BC (0x00040000) ++ ++#define finish_arch_switch(prev) do { \ ++ unsigned long tmpreg; \ ++ asm volatile ( "move.l %2,%0\n" \ ++ "orl %1,%0\n" \ ++ "movec %0,%%cacr" \ ++ : "=&d" (tmpreg) \ ++ : "id" (FLUSH_BC), "m" (shadow_cacr)); \ ++ } while(0) ++ ++#endif ++ + /* + * switch_to(n) should switch tasks to task ptr, first checking that + * ptr isn't the current task, in which case it does nothing. This +@@ -63,16 +78,25 @@ asmlinkage void resume(void); + #define smp_read_barrier_depends() ((void)0) + + /* interrupt control.. */ +-#if 0 +-#define local_irq_enable() asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory") +-#else + #include <linux/hardirq.h> ++#ifndef CONFIG_COLDFIRE + #define local_irq_enable() ({ \ + if (MACH_IS_Q40 || !hardirq_count()) \ + asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory"); \ + }) +-#endif + #define local_irq_disable() asm volatile ("oriw #0x0700,%%sr": : : "memory") ++#else /* CONFIG_COLDFIRE */ ++#define local_irq_enable() \ ++ asm volatile ("move.w %%sr, %%d0\n\t" \ ++ "andil #0xf8ff,%%d0\n\t" \ ++ "move.w %%d0, %%sr\n" \ ++ : : : "cc", "d0", "memory") ++#define local_irq_disable() \ ++ asm volatile ("move %/sr,%%d0\n\t" \ ++ "ori.l #0x0700,%%d0\n\t" \ ++ "move %%d0,%/sr\n" \ ++ : : : "cc", "%d0", "memory") ++#endif + #define local_save_flags(x) asm volatile ("movew %%sr,%0":"=d" (x) : : "memory") + #define local_irq_restore(x) asm volatile ("movew %0,%%sr": :"d" (x) : "memory") + +--- a/include/asm-m68k/thread_info.h ++++ b/include/asm-m68k/thread_info.h +@@ -58,5 +58,6 @@ struct thread_info { + #define TIF_DELAYED_TRACE 14 /* single step a syscall */ + #define TIF_SYSCALL_TRACE 15 /* syscall trace active */ + #define TIF_MEMDIE 16 ++#define TIF_FREEZE 17 /* freezing processes */ + + #endif /* _ASM_M68K_THREAD_INFO_H */ +--- a/include/asm-m68k/tlbflush.h ++++ b/include/asm-m68k/tlbflush.h +@@ -2,7 +2,7 @@ + #define _M68K_TLBFLUSH_H + + +-#ifndef CONFIG_SUN3 ++#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE) + + #include <asm/current.h> + +@@ -92,7 +92,12 @@ static inline void flush_tlb_kernel_rang + flush_tlb_all(); + } + +-#else ++static inline void flush_tlb_pgtables(struct mm_struct *mm, ++ unsigned long start, unsigned long end) ++{ ++} ++ ++#elif defined(CONFIG_SUN3) + + + /* Reserved PMEGs. */ +@@ -214,6 +219,13 @@ static inline void flush_tlb_kernel_page + sun3_put_segmap (addr & ~(SUN3_PMEG_SIZE - 1), SUN3_INVALID_PMEG); + } + ++static inline void flush_tlb_pgtables(struct mm_struct *mm, ++ unsigned long start, unsigned long end) ++{ ++} ++ ++#else /* CONFIG_COLDFIRE */ ++#include <asm/cf_tlbflush.h> + #endif + + #endif /* _M68K_TLBFLUSH_H */ +--- a/include/asm-m68k/uaccess.h ++++ b/include/asm-m68k/uaccess.h +@@ -1,6 +1,9 @@ + #ifndef __M68K_UACCESS_H + #define __M68K_UACCESS_H + ++#ifdef CONFIG_COLDFIRE ++#include <asm/cf_uaccess.h> ++#else + /* + * User space memory access functions + */ +@@ -367,4 +370,5 @@ unsigned long __clear_user(void __user * + + #define strlen_user(str) strnlen_user(str, 32767) + ++#endif /* CONFIG_COLDFIRE */ + #endif /* _M68K_UACCESS_H */ +--- a/include/asm-m68k/virtconvert.h ++++ b/include/asm-m68k/virtconvert.h +@@ -46,9 +46,14 @@ static inline void *phys_to_virt(unsigne + #define virt_to_bus(a) (virt_to_phys(a) + (MACH_IS_HADES ? 0x80000000 : 0)) + #define bus_to_virt(a) (phys_to_virt((a) - (MACH_IS_HADES ? 0x80000000 : 0))) + #else ++#ifdef CONFIG_COLDFIRE ++#define virt_to_bus(a) (a - PAGE_OFFSET + PCI_DMA_BASE) ++#define bus_to_virt(a) (a - PCI_DMA_BASE + PAGE_OFFSET) ++#else /* CONFIG_COLDFIRE */ + #define virt_to_bus virt_to_phys + #define bus_to_virt phys_to_virt + #endif ++#endif + + #endif + #endif +--- /dev/null ++++ b/include/linux/can/dev.h +@@ -0,0 +1,62 @@ ++/* ++ * linux/can/dev.h ++ * ++ * Definitions for CAN controller network devices lib (work in progress) ++ * ++ * * * $Id$ ++ * ++ * Author: Andrey Volkov <avolkov@varma-el.com> ++ * Copyright (c) 2006 Varma Electronics Oy ++ * ++ */ ++ ++#ifndef CAN_DEVICE_H ++#define CAN_DEVICE_H ++ ++#include <linux/version.h> ++#include <linux/can/error.h> ++#include <linux/can/ioctl.h> ++ ++struct can_priv { ++ struct can_device_stats can_stats; ++ ++ /* can-bus oscillator frequency, in Hz, ++ BE CAREFUL! SOME CONTROLLERS (LIKE SJA1000) ++ FOOLISH ABOUT THIS FRQ (for sja1000 as ex. this ++ clock must be xtal clock divided by 2). */ ++ u32 can_sys_clock; ++ ++ /* by default max_brp is equal 64, ++ but for a Freescale TouCAN, as ex., it can be 255*/ ++ u32 max_brp; ++ /* For the mostly all controllers, max_sjw is equal 4, but ++ some, hmm, CAN implementations hardwared it to 1 */ ++ u8 max_sjw; ++ ++ u32 baudrate; /* in bauds */ ++ struct can_bittime bit_time; ++ ++ spinlock_t irq_lock; ++ /* Please hold this lock when touching net_stats/can_stats*/ ++ spinlock_t stats_lock; ++ ++ can_state_t state; ++ can_mode_t mode; ++ can_ctrlmode_t ctrlmode; ++ ++ int (*do_set_bit_time)(struct net_device *dev, struct can_bittime *br); ++ int (*do_get_state) (struct net_device *dev, can_state_t *state); ++ int (*do_set_mode) (struct net_device *dev, can_mode_t mode); ++ int (*do_set_ctrlmode)(struct net_device *dev, can_ctrlmode_t ctrlmode); ++ int (*do_get_ctrlmode)(struct net_device *dev, can_ctrlmode_t *ctrlmode); ++}; ++ ++#define ND2D(_ndev) (_ndev->dev.parent) ++ ++struct net_device *alloc_candev(int sizeof_priv); ++void free_candev(struct net_device *dev); ++ ++int can_calc_bit_time(struct can_priv *can, u32 baudrate, ++ struct can_bittime_std *bit_time); ++ ++#endif /* CAN_DEVICE_H */ +--- /dev/null ++++ b/include/linux/can/ioctl.h +@@ -0,0 +1,152 @@ ++/* ++ * linux/can/ioctl.h ++ * ++ * Definitions for CAN controller setup (work in progress) ++ * ++ * $Id$ ++ * ++ * Send feedback to <socketcan-users@lists.berlios.de> ++ * ++ */ ++ ++#ifndef CAN_IOCTL_H ++#define CAN_IOCTL_H ++ ++#include <linux/sockios.h> ++ ++ ++/* max. 16 private ioctls */ ++ ++#define SIOCSCANBAUDRATE (SIOCDEVPRIVATE+0) ++#define SIOCGCANBAUDRATE (SIOCDEVPRIVATE+1) ++ ++#define SIOCSCANCUSTOMBITTIME (SIOCDEVPRIVATE+2) ++#define SIOCGCANCUSTOMBITTIME (SIOCDEVPRIVATE+3) ++ ++#define SIOCSCANMODE (SIOCDEVPRIVATE+4) ++#define SIOCGCANMODE (SIOCDEVPRIVATE+5) ++ ++#define SIOCSCANCTRLMODE (SIOCDEVPRIVATE+6) ++#define SIOCGCANCTRLMODE (SIOCDEVPRIVATE+7) ++ ++#define SIOCSCANFILTER (SIOCDEVPRIVATE+8) ++#define SIOCGCANFILTER (SIOCDEVPRIVATE+9) ++ ++#define SIOCGCANSTATE (SIOCDEVPRIVATE+10) ++#define SIOCGCANSTATS (SIOCDEVPRIVATE+11) ++ ++#define SIOCSCANERRORCONFIG (SIOCDEVPRIVATE+12) ++#define SIOCGCANERRORCONFIG (SIOCDEVPRIVATE+13) ++ ++/* parameters for ioctls */ ++ ++/* SIOC[SG]CANBAUDRATE */ ++/* baudrate for CAN-controller in bits per second. */ ++/* 0 = Scan for baudrate (Autobaud) */ ++ ++typedef __u32 can_baudrate_t; ++ ++ ++/* SIOC[SG]CANCUSTOMBITTIME */ ++ ++typedef enum CAN_BITTIME_TYPE { ++ CAN_BITTIME_STD, ++ CAN_BITTIME_BTR ++} can_bittime_type_t; ++ ++/* TSEG1 of controllers usually is a sum of synch_seg (always 1), ++ * prop_seg and phase_seg1, TSEG2 = phase_seg2 */ ++ ++struct can_bittime_std { ++ __u32 brp; /* baud rate prescaler */ ++ __u8 prop_seg; /* from 1 to 8 */ ++ __u8 phase_seg1; /* from 1 to 8 */ ++ __u8 phase_seg2; /* from 1 to 8 */ ++ __u8 sjw:7; /* from 1 to 4 */ ++ __u8 sam:1; /* 1 - enable triple sampling */ ++}; ++ ++struct can_bittime_btr { ++ __u8 btr0; ++ __u8 btr1; ++}; ++ ++struct can_bittime { ++ can_bittime_type_t type; ++ union { ++ struct can_bittime_std std; ++ struct can_bittime_btr btr; ++ }; ++}; ++ ++#define CAN_BAUDRATE_UNCONFIGURED ((__u32) 0xFFFFFFFFU) ++#define CAN_BAUDRATE_UNKNOWN 0 ++ ++/* SIOC[SG]CANMODE */ ++ ++typedef __u32 can_mode_t; ++ ++#define CAN_MODE_STOP 0 ++#define CAN_MODE_START 1 ++#define CAN_MODE_SLEEP 2 ++ ++ ++/* SIOC[SG]CANCTRLMODE */ ++ ++typedef __u32 can_ctrlmode_t; ++ ++#define CAN_CTRLMODE_LOOPBACK 0x1 ++#define CAN_CTRLMODE_LISTENONLY 0x2 ++ ++ ++/* SIOCGCANFILTER */ ++ ++typedef __u32 can_filter_t; ++ ++/* filter modes (may vary due to controller specific capabilities) */ ++#define CAN_FILTER_CAPAB 0 /* get filter type capabilities ++ (32 Bit value) */ ++#define CAN_FILTER_MASK_VALUE 1 /* easy bit filter (see struct can_filter) */ ++#define CAN_FILTER_SFF_BITMASK 2 /* bitfield with 2048 bit SFF filter */ ++ /* filters 3 - 31 currently undefined */ ++ ++#define CAN_FILTER_MAX 31 /* max. filter type value */ ++ ++ ++/* SIOCGCANSTATE */ ++ ++typedef __u32 can_state_t; ++ ++#define CAN_STATE_ACTIVE 0 ++#define CAN_STATE_BUS_WARNING 1 ++#define CAN_STATE_BUS_PASSIVE 2 ++#define CAN_STATE_BUS_OFF 3 ++#define CAN_STATE_SCANNING_BAUDRATE 4 ++#define CAN_STATE_STOPPED 5 ++#define CAN_STATE_SLEEPING 6 ++ ++ ++/* SIOCGCANSTATS */ ++ ++struct can_device_stats { ++ int error_warning; ++ int data_overrun; ++ int wakeup; ++ int bus_error; ++ int error_passive; ++ int arbitration_lost; ++ int restarts; ++ int bus_error_at_init; ++}; ++ ++/* SIOC[SG]CANERRORCONFIG */ ++ ++typedef enum CAN_ERRCFG_TYPE { ++ CAN_ERRCFG_MASK, ++ CAN_ERRCFG_BUSERR, ++ CAN_ERRCFG_BUSOFF ++} can_errcfg_type_t; ++ ++/* tbd */ ++ ++#endif /* CAN_IOCTL_H */ +--- /dev/null ++++ b/include/linux/can/version.h +@@ -0,0 +1,22 @@ ++/* ++ * linux/can/version.h ++ * ++ * Version information for the CAN network layer implementation ++ ++ * Author: Urs Thuermann <urs.thuermann@volkswagen.de> ++ * Copyright (c) 2002-2007 Volkswagen Group Electronic Research ++ * All rights reserved. ++ * ++ * Send feedback to <socketcan-users@lists.berlios.de> ++ * ++ */ ++ ++#ifndef CAN_VERSION_H ++#define CAN_VERSION_H ++ ++#define RCSID(s) asm(".section .rodata.str1.1,\"aMS\",@progbits,1\n\t" \ ++ ".string \"" s "\"\n\t.previous\n") ++ ++RCSID("$Id$"); ++ ++#endif /* CAN_VERSION_H */ +--- a/include/linux/fb.h ++++ b/include/linux/fb.h +@@ -873,6 +873,17 @@ struct fb_info { + #define fb_writeq sbus_writeq + #define fb_memset sbus_memset_io + ++#elif defined(CONFIG_COLDFIRE) ++#define fb_readb readb ++#define fb_readw readw ++#define fb_readl readl ++#define fb_readq readq ++#define fb_writeb writeb ++#define fb_writew writew ++#define fb_writel writel ++#define fb_writeq writeq ++#define fb_memset memset_io ++ + #elif defined(__i386__) || defined(__alpha__) || defined(__x86_64__) || defined(__hppa__) || (defined(__sh__) && !defined(__SH5__)) || defined(__powerpc__) || defined(__avr32__) + + #define fb_readb __raw_readb +@@ -899,7 +910,7 @@ struct fb_info { + + #endif + +-#if defined (__BIG_ENDIAN) ++#if defined (__BIG_ENDIAN) && !defined(CONFIG_COLDFIRE) + #define FB_LEFT_POS(bpp) (32 - bpp) + #define FB_SHIFT_HIGH(val, bits) ((val) >> (bits)) + #define FB_SHIFT_LOW(val, bits) ((val) << (bits)) +--- a/include/linux/fsl_devices.h ++++ b/include/linux/fsl_devices.h +@@ -91,6 +91,19 @@ enum fsl_usb2_operating_modes { + FSL_USB2_DR_OTG, + }; + ++/* DDD ++ * replace _operating_modes with _controller ++ * ++ * the operating_mode tests in fsl_platform_verify() aren't needed, ++ * since the ehci driver isn't going to be probe()d unless it's ++ * "fsl-ehci" device anyway, and what we really need to know is ++ * which controller (MPH/DR) we're dealing with ++ */ ++enum fsl_usb2_controller { ++ FSL_USB2_MPH, ++ FSL_USB2_DR, ++}; ++ + enum fsl_usb2_phy_modes { + FSL_USB2_PHY_NONE, + FSL_USB2_PHY_ULPI, +@@ -101,9 +114,36 @@ enum fsl_usb2_phy_modes { + + struct fsl_usb2_platform_data { + /* board specific information */ +- enum fsl_usb2_operating_modes operating_mode; ++ /* ++ * DDD see note above ++ * enum fsl_usb2_operating_modes operating_mode; ++ */ ++ enum fsl_usb2_controller controller; + enum fsl_usb2_phy_modes phy_mode; + unsigned int port_enables; ++ /* ++ * DDD this could arguably be moved to a separate ++ * fsl usb2 device header file ++ */ ++ char *name; /* pretty print */ ++ int (*platform_init) (struct platform_device *); ++ void (*platform_uninit) (struct platform_device *); ++ int (*platform_verify) (struct platform_device *); ++ u32 xcvr_type; /* PORTSCX_PTS_* */ ++ u32 view; /* ULPI viewport register */ ++ u32 r_start; /* start of MEM resource */ ++ u32 r_len; /* length of MEM resource */ ++ void __iomem *regs; /* ioremap'd register base */ ++ unsigned big_endian_mmio : 1; ++ unsigned big_endian_desc : 1; ++ unsigned es : 1; /* need USBMODE:ES */ ++ unsigned have_sysif_regs : 1; ++ unsigned le_setup_buf : 1; ++ unsigned does_otg : 1; /* set IFF it's an OTG port */ ++ ++ unsigned power_budget; /* for hcd->power_budget */ ++ struct fsl_xcvr_ops *xcvr_ops; ++ int max_ep_nr; /* max # of endpoints */ + }; + + /* Flags in fsl_usb2_mph_platform_data */ +@@ -126,5 +166,16 @@ struct mpc8xx_pcmcia_ops { + int(*voltage_set)(int slot, int vcc, int vpp); + }; + ++struct fsl_ata_platform_data { ++#ifdef CONFIG_FSL_PATA_USE_DMA ++ int udma_mask; /* UDMA modes h/w can handle */ ++ int fifo_alarm; /* value for fifo_alarm reg */ ++ int max_sg; /* longest sglist h/w can handle */ ++#endif ++ int (*init)(struct platform_device *pdev); ++ void (*exit)(void); ++ int (*get_clk_rate)(void); ++}; ++ + #endif /* _FSL_DEVICE_H_ */ + #endif /* __KERNEL__ */ +--- a/include/linux/pci.h ++++ b/include/linux/pci.h +@@ -458,8 +458,10 @@ int __must_check pcibios_enable_device(s + char *pcibios_setup(char *str); + + /* Used only when drivers/pci/setup.c is used */ ++#ifndef CONFIG_COLDFIRE + void pcibios_align_resource(void *, struct resource *, resource_size_t, + resource_size_t); ++#endif + void pcibios_update_irq(struct pci_dev *, int irq); + + /* Generic PCI functions used internally */ +--- /dev/null ++++ b/include/linux/spi/mcfqspi.h +@@ -0,0 +1,80 @@ ++/****************************************************************************/ ++ ++/* ++ * mcfqspi.c - Master QSPI controller for the ColdFire processors ++ * ++ * (C) Copyright 2005, Intec Automation, ++ * Mike Lavender (mike@steroidmicros) ++ * ++ ++ This program is free software; you can redistribute it and/or modify ++ it under the terms of the GNU General Public License as published by ++ the Free Software Foundation; either version 2 of the License, or ++ (at your option) any later version. ++ ++ This program is distributed in the hope that it will be useful, ++ but WITHOUT ANY WARRANTY; without even the implied warranty of ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ GNU General Public License for more details. ++ ++ You should have received a copy of the GNU General Public License ++ along with this program; if not, write to the Free Software ++ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ ++/* ------------------------------------------------------------------------- */ ++ ++#ifndef MCFQSPI_H_ ++#define MCFQSPI_H_ ++ ++#define QSPI_CS_INIT 0x01 ++#define QSPI_CS_ASSERT 0x02 ++#define QSPI_CS_DROP 0x04 ++ ++#define QSPIIOCS_DOUT_HIZ 1 /* QMR[DOHIE] set hi-z dout between transfers */ ++#define QSPIIOCS_BITS 2 /* QMR[BITS] set transfer size */ ++#define QSPIIOCG_BITS 3 /* QMR[BITS] get transfer size */ ++#define QSPIIOCS_CPOL 4 /* QMR[CPOL] set SCK inactive state */ ++#define QSPIIOCS_CPHA 5 /* QMR[CPHA] set SCK phase, 1=rising edge */ ++#define QSPIIOCS_BAUD 6 /* QMR[BAUD] set SCK baud rate divider */ ++#define QSPIIOCS_QCD 7 /* QDLYR[QCD] set start delay */ ++#define QSPIIOCS_DTL 8 /* QDLYR[DTL] set after delay */ ++#define QSPIIOCS_CONT 9 /* continuous CS asserted during transfer */ ++#define QSPIIOCS_READDATA 10 /* set data send during read */ ++#define QSPIIOCS_ODD_MOD 11 /* if length of buffer is a odd number, 16-bit transfers */ ++ /* are finalized with a 8-bit transfer */ ++#define QSPIIOCS_DSP_MOD 12 /* transfers are bounded to 15/30 bytes (a multiple of 3 bytes = 1 DSPword) */ ++#define QSPIIOCS_POLL_MOD 13 /* driver uses polling instead of interrupts */ ++ ++#define QSPIIOCS_SET_CSIV 14 /* sets CSIV flag (cs inactive level) */ ++ ++#ifdef CONFIG_M520x ++#undef MCF_GPIO_PAR_QSPI ++#define MCF_GPIO_PAR_QSPI (0xA4034) ++#endif ++ ++struct coldfire_spi_master { ++ u16 bus_num; ++ u16 num_chipselect; ++ u8 irq_source; ++ u32 irq_vector; ++ u32 irq_mask; ++ u8 irq_lp; ++ u8 par_val; ++ u16 par_val16; ++ void (*cs_control)(u8 cs, u8 command); ++}; ++ ++ ++struct coldfire_spi_chip { ++ u8 mode; ++ u8 bits_per_word; ++ u8 del_cs_to_clk; ++ u8 del_after_trans; ++ u16 void_write_data; ++}; ++ ++typedef struct qspi_read_data { ++ __u32 length; ++ __u8 *buf; /* data to send during read */ ++ unsigned int loop : 1; ++} qspi_read_data; ++#endif /*MCFQSPI_H_*/ +--- /dev/null ++++ b/include/linux/usb/fsl_usb2.h +@@ -0,0 +1,463 @@ ++/* ++ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. ++ */ ++ ++/* ++ * The code contained herein is licensed under the GNU General Public ++ * License. You may obtain a copy of the GNU General Public License ++ * Version 2 or later at the following locations: ++ * ++ * http://www.opensource.org/licenses/gpl-license.html ++ * http://www.gnu.org/copyleft/gpl.html ++ */ ++ ++/* ++ * Freescale USB device/endpoint management registers ++ */ ++#ifndef __FSL_USB2_H ++#define __FSL_USB2_H ++ ++ ++ /* USB DR device mode registers (Little Endian) */ ++struct fsl_usb_device_regs { ++ /* Capability register */ ++ u32 id; ++ u32 res1[63]; ++ u16 caplength; /* Capability Register Length */ ++ u16 hciversion; /* Host Controller Interface Version */ ++ u32 hcsparams; /* Host Controller Structual Parameters */ ++ u32 hccparams; /* Host Controller Capability Parameters */ ++ u32 res2[5]; ++ u32 dciversion; /* Device Controller Interface Version */ ++ u32 dccparams; /* Device Controller Capability Parameters */ ++ u32 res3[6]; ++ /* Operation register */ ++ u32 usbcmd; /* USB Command Register */ ++ u32 usbsts; /* USB Status Register */ ++ u32 usbintr; /* USB Interrupt Enable Register */ ++ u32 frindex; /* Frame Index Register */ ++ u32 res4; ++ u32 deviceaddr; /* Device Address */ ++ u32 endpointlistaddr; /* Endpoint List Address Register */ ++ u32 res5; ++ u32 burstsize; /* Master Interface Data Burst Size Register */ ++ u32 txttfilltuning; /* Transmit FIFO Tuning Controls Register */ ++ u32 res6[2]; ++ u32 ulpiview; ++ u32 res7[3]; ++ u32 configflag; /* Configure Flag Register */ ++ u32 portsc1; /* Port 1 Status and Control Register */ ++ u32 res8[7]; ++ u32 otgsc; /* On-The-Go Status and Control */ ++ u32 usbmode; /* USB Mode Register */ ++ u32 endptsetupstat; /* Endpoint Setup Status Register */ ++ u32 endpointprime; /* Endpoint Initialization Register */ ++ u32 endptflush; /* Endpoint Flush Register */ ++ u32 endptstatus; /* Endpoint Status Register */ ++ u32 endptcomplete; /* Endpoint Complete Register */ ++#if 0 ++ u32 endptctrl[USB_MAX_ENDPOINTS]; /* Endpoint Control Registers */ ++#else ++ // DDD see DCCPARAMS:DEN for the real number of device endpoints ++ // DDD 16 is the max ++ u32 endptctrl[16]; /* Endpoint Control Registers */ ++#endif ++}; ++ ++ /* USB DR host mode registers (Little Endian) */ ++struct fsl_usb_host_regs { ++ /* Capability register */ ++ u32 id; ++ u32 res1[63]; ++ u16 caplength; /* Capability Register Length */ ++ u16 hciversion; /* Host Controller Interface Version */ ++ u32 hcsparams; /* Host Controller Structual Parameters */ ++ u32 hccparams; /* Host Controller Capability Parameters */ ++ u32 res2[5]; ++ u32 dciversion; /* Device Controller Interface Version */ ++ u32 dccparams; /* Device Controller Capability Parameters */ ++ u32 res3[6]; ++ /* Operation register */ ++ u32 usbcmd; /* USB Command Register */ ++ u32 usbsts; /* USB Status Register */ ++ u32 usbintr; /* USB Interrupt Enable Register */ ++ u32 frindex; /* Frame Index Register */ ++ u32 res4; ++ u32 periodiclistbase; /* Periodic Frame List Base Address Register */ ++ u32 asynclistaddr; /* Current Asynchronous List Address Register */ ++ u32 res5; ++ u32 burstsize; /* Master Interface Data Burst Size Register */ ++ u32 txttfilltuning; /* Transmit FIFO Tuning Controls Register */ ++ u32 res6[2]; ++ u32 ulpiview; ++ u32 res7[3]; ++ u32 configflag; /* Configure Flag Register */ ++ u32 portsc1; /* Port 1 Status and Control Register */ ++ u32 res8[7]; ++ u32 otgsc; /* On-The-Go Status and Control */ ++ u32 usbmode; /* USB Mode Register */ ++ u32 endptsetupstat; /* Endpoint Setup Status Register */ ++ u32 endpointprime; /* Endpoint Initialization Register */ ++ u32 endptflush; /* Endpoint Flush Register */ ++ u32 endptstatus; /* Endpoint Status Register */ ++ u32 endptcomplete; /* Endpoint Complete Register */ ++#if 0 ++ u32 endptctrl[USB_MAX_ENDPOINTS]; /* Endpoint Control Registers */ ++#else ++ /* DDD see DCCPARAMS:DEN for the real number of device endpoints */ ++ /* DDD 16 is the max */ ++ u32 endptctrl[16]; /* Endpoint Control Registers */ ++#endif ++}; ++ ++ /* non-EHCI USB system interface registers (Big Endian) */ ++struct usb_sys_interface { ++ u32 snoop1; ++ u32 snoop2; ++ u32 age_cnt_thresh; /* Age Count Threshold Register */ ++ u32 pri_ctrl; /* Priority Control Register */ ++ u32 si_ctrl; /* System Interface Control Register */ ++ u32 res[59]; ++ u32 control; /* General Purpose Control Register */ ++}; ++ ++/* ep0 transfer state */ ++#define WAIT_FOR_SETUP 0 ++#define DATA_STATE_XMIT 1 ++#define DATA_STATE_NEED_ZLP 2 ++#define WAIT_FOR_OUT_STATUS 3 ++#define DATA_STATE_RECV 4 ++ ++/* Frame Index Register Bit Masks */ ++#define USB_FRINDEX_MASKS 0x3fff ++ ++ ++ ++/* USBCMD Register Bit Masks */ ++#define USB_CMD_RUN_STOP 0x00000001 ++#define USB_CMD_CTRL_RESET 0x00000002 ++#define USB_CMD_PERIODIC_SCHEDULE_EN 0x00000010 ++#define USB_CMD_ASYNC_SCHEDULE_EN 0x00000020 ++#define USB_CMD_INT_AA_DOORBELL 0x00000040 ++#define USB_CMD_ASP 0x00000300 ++#define USB_CMD_ASYNC_SCH_PARK_EN 0x00000800 ++#define USB_CMD_SUTW 0x00002000 ++#define USB_CMD_ATDTW 0x00004000 ++#define USB_CMD_ITC 0x00FF0000 ++ ++/* bit 15,3,2 are frame list size */ ++#define USB_CMD_FRAME_SIZE_1024 0x00000000 ++#define USB_CMD_FRAME_SIZE_512 0x00000004 ++#define USB_CMD_FRAME_SIZE_256 0x00000008 ++#define USB_CMD_FRAME_SIZE_128 0x0000000C ++#define USB_CMD_FRAME_SIZE_64 0x00008000 ++#define USB_CMD_FRAME_SIZE_32 0x00008004 ++#define USB_CMD_FRAME_SIZE_16 0x00008008 ++#define USB_CMD_FRAME_SIZE_8 0x0000800C ++ ++/* bit 9-8 are async schedule park mode count */ ++#define USB_CMD_ASP_00 0x00000000 ++#define USB_CMD_ASP_01 0x00000100 ++#define USB_CMD_ASP_10 0x00000200 ++#define USB_CMD_ASP_11 0x00000300 ++#define USB_CMD_ASP_BIT_POS 8 ++ ++/* bit 23-16 are interrupt threshold control */ ++#define USB_CMD_ITC_NO_THRESHOLD 0x00000000 ++#define USB_CMD_ITC_1_MICRO_FRM 0x00010000 ++#define USB_CMD_ITC_2_MICRO_FRM 0x00020000 ++#define USB_CMD_ITC_4_MICRO_FRM 0x00040000 ++#define USB_CMD_ITC_8_MICRO_FRM 0x00080000 ++#define USB_CMD_ITC_16_MICRO_FRM 0x00100000 ++#define USB_CMD_ITC_32_MICRO_FRM 0x00200000 ++#define USB_CMD_ITC_64_MICRO_FRM 0x00400000 ++#define USB_CMD_ITC_BIT_POS 16 ++ ++ ++ ++ ++/* USB STS Register Bit Masks */ ++#define USB_STS_INT 0x00000001 ++#define USB_STS_ERR 0x00000002 ++#define USB_STS_PORT_CHANGE 0x00000004 ++#define USB_STS_FRM_LST_ROLL 0x00000008 ++#define USB_STS_SYS_ERR 0x00000010 ++#define USB_STS_IAA 0x00000020 ++#define USB_STS_RESET 0x00000040 ++#define USB_STS_SOF 0x00000080 ++#define USB_STS_SUSPEND 0x00000100 ++#define USB_STS_HC_HALTED 0x00001000 ++#define USB_STS_RCL 0x00002000 ++#define USB_STS_PERIODIC_SCHEDULE 0x00004000 ++#define USB_STS_ASYNC_SCHEDULE 0x00008000 ++ ++/* USB INTR Register Bit Masks */ ++#define USB_INTR_INT_EN 0x00000001 ++#define USB_INTR_ERR_INT_EN 0x00000002 ++#define USB_INTR_PTC_DETECT_EN 0x00000004 ++#define USB_INTR_FRM_LST_ROLL_EN 0x00000008 ++#define USB_INTR_SYS_ERR_EN 0x00000010 ++#define USB_INTR_ASYN_ADV_EN 0x00000020 ++#define USB_INTR_RESET_EN 0x00000040 ++#define USB_INTR_SOF_EN 0x00000080 ++#define USB_INTR_DEVICE_SUSPEND 0x00000100 ++ ++/* Device Address bit masks */ ++#define USB_DEVICE_ADDRESS_MASK 0xFE000000 ++#define USB_DEVICE_ADDRESS_BIT_POS 25 ++ ++/* endpoint list address bit masks */ ++#define USB_EP_LIST_ADDRESS_MASK 0xfffff800 ++ ++ ++/* x_PORTSCx */ ++/* bit 31-30 are port transceiver select */ ++#define PORTSCX_PTS_MASK (3 << 30) /* parallel xcvr select mask */ ++#define PORTSCX_PHY_TYPE_SEL PORTSCX_PTS_MASK ++#define PORTSCX_PTS_UTMI (0 << 30) /* UTMI/UTMI+ */ ++#define PORTSCX_PTS_PHILIPS (1 << 30) /* Philips classic */ ++#define PORTSCX_PTS_ULPI (2 << 30) /* ULPI */ ++#define PORTSCX_PTS_SERIAL (3 << 30) /* serial */ ++#define PORTSCX_PTS_FSLS PORTSCX_PTS_SERIAL ++#define PORTSCX_PTS_ONCHIP PORTSCX_PTS_FSLS ++ ++#define PORTSCX_STS (1 << 29) /* serial xcvr select */ ++ ++/* bit 28 is parallel transceiver width for UTMI interface */ ++#define PORTSCX_PTW_8BIT (0 << 28) /* 8 bit parallel xcvr */ ++#define PORTSCX_PTW_16BIT (1 << 28) /* 16 bi parallel xcvr */ ++ ++/* bit 27-26 are port speed */ ++#define PORTSCX_PORT_SPEED_FULL (0 << 26) ++#define PORTSCX_PORT_SPEED_LOW (1 << 26) ++#define PORTSCX_PORT_SPEED_HIGH (2 << 26) ++#define PORTSCX_PORT_SPEED_UNDEF (3 << 26) ++#define PORTSCX_PORT_SPEED_MASK (3 << 26) ++ ++#define PORTSCX_PHY_LOW_POWER_SPD (1 << 23) /* phy low pwr suspend/clk disable */ ++ ++/* bit 19-16 are port test control */ ++#define PORTSCX_PTC_DISABLE (0 << 16) ++#define PORTSCX_PTC_JSTATE (1 << 16) ++#define PORTSCX_PTC_KSTATE (2 << 16) ++#define PORTSCX_PTC_SEQNAK (3 << 16) /* SE0 (host) / NAK (device) */ ++#define PORTSCX_PTC_PACKET (4 << 16) ++#define PORTSCX_PTC_FORCE_EN_HS (5 << 16) ++#define PORTSCX_PTC_FORCE_EN_FS (6 << 16) ++#define PORTSCX_PTC_FORCE_EN_LS (7 << 16) ++ ++ ++/* bit 15-14 are port indicator control */ ++#define PORTSCX_PIC_OFF (0 << 14) ++#define PORTSCX_PIC_AMBER (1 << 14) ++#define PORTSCX_PIC_GREEN (2 << 14) ++#define PORTSCX_PIC_UNDEF (3 << 14) ++ ++#define PORTSCX_PORT_POWER (1 << 12) /* port power */ ++ ++/* bit 11-10 are line status */ ++#define PORTSCX_LS_MASK (3 << 10) /* Line State mask */ ++#define PORTSCX_LS_SE0 (0 << 10) /* SE0 */ ++#define PORTSCX_LS_K_STATE (1 << 10) /* K-state */ ++#define PORTSCX_LS_J_STATE (2 << 10) /* J-state */ ++ ++#define PORTSCX_PORT_RESET (1 << 8) /* Port reset */ ++#define PORTSCX_PORT_SUSPEND (1 << 7) /* Suspend */ ++#define PORTSCX_PORT_FORCE_RESUME (1 << 6) /* Force port resume */ ++#define PORTSCX_OVER_CURRENT_CHG (1 << 5) /* over current change */ ++#define PORTSCX_OVER_CURRENT_ACT (1 << 4) /* over currrent active */ ++#define PORTSCX_PORT_EN_DIS_CHANGE (1 << 3) /* port {en,dis}able change */ ++#define PORTSCX_PORT_ENABLE (1 << 2) /* port enabled */ ++#define PORTSCX_CONNECT_STATUS_CHANGE (1 << 1) /* connect status change */ ++#define PORTSCX_CURRENT_CONNECT_STATUS (1 << 0) /* current connect status */ ++ ++#define PORTSCX_W1C_BITS \ ++ ( PORTSCX_CONNECT_STATUS_CHANGE | \ ++ PORTSCX_PORT_EN_DIS_CHANGE | \ ++ PORTSCX_OVER_CURRENT_CHG ) ++ ++ ++ ++/* UOG_OTGSC Register Bits */ ++/* control bits: */ ++#define OTGSC_CTRL_VBUS_DISCHARGE (1 << 0) ++#define OTGSC_CTRL_VBUS_CHARGE (1 << 1) ++#define OTGSC_CTRL_OTG_TERM (1 << 3) /* controls DM pulldown */ ++#define OTGSC_CTRL_DATA_PULSING (1 << 4) ++#define OTGSC_CTRL_USB_ID_PU (1 << 5) /* enable ID pullup */ ++/* current status: (R/O) */ ++#define OTGSC_STS_USB_ID (1 << 8) /* 0=A-device 1=B-device */ ++#define OTGSC_STS_A_VBUS_VALID (1 << 9) ++#define OTGSC_STS_A_SESSION_VALID (1 << 10) ++#define OTGSC_STS_B_SESSION_VALID (1 << 11) ++#define OTGSC_STS_B_SESSION_END (1 << 12) ++#define OTGSC_STS_1ms_TIMER (1 << 13) ++#define OTGSC_STS_DATA_PULSE (1 << 14) ++/* interrupt status: (write to clear) */ ++#define OTGSC_INTSTS_MASK (0x7f << 16) ++#define OTGSC_INTSTS_USB_ID (1 << 16) ++#define OTGSC_INTSTS_A_VBUS_VALID (1 << 17) ++#define OTGSC_INTSTS_A_SESSION_VALID (1 << 18) ++#define OTGSC_INTSTS_B_SESSION_VALID (1 << 19) ++#define OTGSC_INTSTS_B_SESSION_END (1 << 20) ++#define OTGSC_INTSTS_1MS_TIMER (1 << 21) ++#define OTGSC_INTSTS_DATA_PULSE (1 << 22) ++/* interrupt enables: */ ++#define OTGSC_IE_MASK (0x7f << 24) ++#define OTGSC_IE_USB_ID (1 << 24) ++#define OTGSC_IE_A_VBUS_VALID (1 << 25) ++#define OTGSC_IE_A_SESSION_VALID (1 << 26) ++#define OTGSC_IE_B_SESSION_VALID (1 << 27) ++#define OTGSC_IE_B_SESSION_END (1 << 28) ++#define OTGSC_IE_1ms_TIMER (1 << 29) ++#define OTGSC_IE_DATA_PULSE (1 << 30) ++ ++#if 1 /* DDD FIXME these here for compatibility between my names and Leo's */ ++/* OTG interrupt enable bit masks */ ++#define OTGSC_INTERRUPT_ENABLE_BITS_MASK OTGSC_IE_MASK ++ ++/* OTG interrupt status bit masks */ ++#define OTGSC_INTERRUPT_STATUS_BITS_MASK OTGSC_INTSTS_MASK ++#endif // 1 ++ ++ ++ ++/* x_USBMODE */ ++#undef USBMODE_SDIS /* defined as bit 3 in drivers/usb/host/ehci.h */ ++#define USBMODE_SDIS (1 << 4) /* stream disable mode */ ++#define USBMODE_SLOM (1 << 3) /* setup lockout mode */ ++#define USBMODE_ES (1 << 2) /* (big) endian select */ ++#define USBMODE_CM_MASK (3 << 0) /* controller mode mask */ ++#define USBMODE_CM_HOST (3 << 0) /* host */ ++#define USBMODE_CM_DEVICE (2 << 0) /* device */ ++// DDD #define USBMODE_CM_IDLE (0 << 0) /* idle */ ++ ++/* DDD for compatibility for now */ ++#define USB_MODE_CTRL_MODE_IDLE USBMODE_CM_IDLE ++#define USB_MODE_CTRL_MODE_DEVICE USBMODE_CM_DEVICE ++#define USB_MODE_CTRL_MODE_HOST USBMODE_CM_HOST ++#define USB_MODE_SETUP_LOCK_OFF USBMODE_SLOM ++#define USB_MODE_STREAM_DISABLE USBMODE_SDIS ++ ++ ++/* ULPIVIEW register bits */ ++#define ULPIVW_WU (1 << 31) /* Wakeup */ ++#define ULPIVW_RUN (1 << 30) /* read/write run */ ++#define ULPIVW_WRITE (1 << 29) /* 0=read 1=write */ ++#define ULPIVW_SS (1 << 27) /* SyncState */ ++#define ULPIVW_PORT_MASK 0x07 /* Port field */ ++#define ULPIVW_PORT_SHIFT 24 ++#define ULPIVW_ADDR_MASK 0xFF /* data address field */ ++#define ULPIVW_ADDR_SHIFT 16 ++#define ULPIVW_RDATA_MASK 0xFF /* read data field */ ++#define ULPIVW_RDATA_SHIFT 8 ++#define ULPIVW_WDATA_MASK 0xFF /* write data field */ ++#define ULPIVW_WDATA_SHIFT 0 ++ ++ ++/* Endpoint Flush Register */ ++#define EPFLUSH_TX_OFFSET 0x00010000 ++#define EPFLUSH_RX_OFFSET 0x00000000 ++ ++/* Endpoint Setup Status bit masks */ ++#define EP_SETUP_STATUS_MASK 0x0000003F ++#define EP_SETUP_STATUS_EP0 0x00000001 ++ ++/* ENDPOINTCTRLx Register Bit Masks */ ++#define EPCTRL_TX_ENABLE 0x00800000 ++#define EPCTRL_TX_DATA_TOGGLE_RST 0x00400000 /* Not EP0 */ ++#define EPCTRL_TX_DATA_TOGGLE_INH 0x00200000 /* Not EP0 */ ++#define EPCTRL_TX_TYPE 0x000C0000 ++#define EPCTRL_TX_DATA_SOURCE 0x00020000 /* Not EP0 */ ++#define EPCTRL_TX_EP_STALL 0x00010000 ++#define EPCTRL_RX_ENABLE 0x00000080 ++#define EPCTRL_RX_DATA_TOGGLE_RST 0x00000040 /* Not EP0 */ ++#define EPCTRL_RX_DATA_TOGGLE_INH 0x00000020 /* Not EP0 */ ++#define EPCTRL_RX_TYPE 0x0000000C ++#define EPCTRL_RX_DATA_SINK 0x00000002 /* Not EP0 */ ++#define EPCTRL_RX_EP_STALL 0x00000001 ++ ++/* bit 19-18 and 3-2 are endpoint type */ ++#define EPCTRL_EP_TYPE_CONTROL 0 ++#define EPCTRL_EP_TYPE_ISO 1 ++#define EPCTRL_EP_TYPE_BULK 2 ++#define EPCTRL_EP_TYPE_INTERRUPT 3 ++#define EPCTRL_TX_EP_TYPE_SHIFT 18 ++#define EPCTRL_RX_EP_TYPE_SHIFT 2 ++ ++/* SNOOPn Register Bit Masks */ ++#define SNOOP_ADDRESS_MASK 0xFFFFF000 ++#define SNOOP_SIZE_ZERO 0x00 /* snooping disable */ ++#define SNOOP_SIZE_4KB 0x0B /* 4KB snoop size */ ++#define SNOOP_SIZE_8KB 0x0C ++#define SNOOP_SIZE_16KB 0x0D ++#define SNOOP_SIZE_32KB 0x0E ++#define SNOOP_SIZE_64KB 0x0F ++#define SNOOP_SIZE_128KB 0x10 ++#define SNOOP_SIZE_256KB 0x11 ++#define SNOOP_SIZE_512KB 0x12 ++#define SNOOP_SIZE_1MB 0x13 ++#define SNOOP_SIZE_2MB 0x14 ++#define SNOOP_SIZE_4MB 0x15 ++#define SNOOP_SIZE_8MB 0x16 ++#define SNOOP_SIZE_16MB 0x17 ++#define SNOOP_SIZE_32MB 0x18 ++#define SNOOP_SIZE_64MB 0x19 ++#define SNOOP_SIZE_128MB 0x1A ++#define SNOOP_SIZE_256MB 0x1B ++#define SNOOP_SIZE_512MB 0x1C ++#define SNOOP_SIZE_1GB 0x1D ++#define SNOOP_SIZE_2GB 0x1E /* 2GB snoop size */ ++ ++/* pri_ctrl Register Bit Masks */ ++#define PRI_CTRL_PRI_LVL1 0x0000000C ++#define PRI_CTRL_PRI_LVL0 0x00000003 ++ ++/* si_ctrl Register Bit Masks */ ++#define SI_CTRL_ERR_DISABLE 0x00000010 ++#define SI_CTRL_IDRC_DISABLE 0x00000008 ++#define SI_CTRL_RD_SAFE_EN 0x00000004 ++#define SI_CTRL_RD_PREFETCH_DISABLE 0x00000002 ++#define SI_CTRL_RD_PREFEFETCH_VAL 0x00000001 ++ ++ ++/* control Register Bit Masks */ ++#define USB_CTRL_IOENB 0x00000004 ++#define USB_CTRL_ULPI_INT0EN 0x00000001 ++ ++ ++/* Endpoint Transfer Descriptor bit Masks */ ++#define DTD_NEXT_TERMINATE 0x00000001 ++#define DTD_IOC 0x00008000 ++#define DTD_STATUS_ACTIVE 0x00000080 ++#define DTD_STATUS_HALTED 0x00000040 ++#define DTD_STATUS_DATA_BUFF_ERR 0x00000020 ++#define DTD_STATUS_TRANSACTION_ERR 0x00000008 ++#define DTD_RESERVED_FIELDS 0x80007300 ++#define DTD_ADDR_MASK 0xFFFFFFE0 ++#define DTD_PACKET_SIZE 0x7FFF0000 ++#define DTD_LENGTH_BIT_POS 16 ++#define DTD_ERROR_MASK (DTD_STATUS_HALTED | \ ++ DTD_STATUS_DATA_BUFF_ERR | \ ++ DTD_STATUS_TRANSACTION_ERR) ++/* Alignment requirements; must be a power of two */ ++#define DTD_ALIGNMENT 0x20 ++#define QH_ALIGNMENT 2048 ++ ++/* Controller dma boundary */ ++#define UDC_DMA_BOUNDARY 0x1000 ++ ++#if defined CONFIG_PPC32 ++#define fsl_readl(addr) in_le32((addr)) ++#define fsl_writel(addr, val32) out_le32((addr), (val32)) ++#elif defined CONFIG_COLDFIRE ++#define fsl_readl(addr) in_be32((__force unsigned *)(addr)) ++#define fsl_writel(val32, addr) out_be32((__force unsigned *)(addr), (val32)) ++ ++#define fsl_readw(addr) in_be16((__force unsigned *)(addr)) ++#define fsl_writew(val16, addr) out_be16((__force unsigned *)(addr), (val16)) ++#else ++#error fsl_{readl, writel} must be defined ++#endif ++ ++#endif /* __FSL_USB2_H */ +--- /dev/null ++++ b/include/linux/usb/fsl_xcvr.h +@@ -0,0 +1,42 @@ ++/* ++ * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. ++ */ ++ ++/* ++ * The code contained herein is licensed under the GNU General Public ++ * License. You may obtain a copy of the GNU General Public License ++ * Version 2 or later at the following locations: ++ * ++ * http://www.opensource.org/licenses/gpl-license.html ++ * http://www.gnu.org/copyleft/gpl.html ++ */ ++ ++enum fsl_usb_ctrlr { ++ USB_CTRLR_H1 = 0, ++ USB_CTRLR_H2 = 1, ++ USB_CTRLR_OTG = 2, ++}; ++ ++ ++/** ++ * struct fsl_xcvr_ops - USB transceiver operations ++ * ++ * @xcvr_type: one of PORTSCX_PTS_{UTMI,SERIAL,ULPI} ++ * @init: transceiver- and board-specific initialization function ++ * @uninit: transceiver- and board-specific uninitialization function ++ * @set_host: ++ * @set_device: ++ * ++ */ ++struct fsl_xcvr_ops { ++ enum fsl_usb_ctrlr ctrlr; /* H1, H2, OTG */ ++ u32 xcvr_type; ++ ++ void (*init)(struct platform_device *pdev); ++ void (*uninit)(struct platform_device *pdev); ++ void (*set_host)(void); /* DDD combine set_host and _device ? */ ++ void (*set_device)(void); ++ void (*set_vbus_power)(struct fsl_usb2_platform_data *pdata, int on); ++}; ++ ++ +--- /dev/null ++++ b/net/can/dev.c +@@ -0,0 +1,292 @@ ++/* ++ * $Id$ ++ * ++ * Copyright (C) 2005 Marc Kleine-Budde, Pengutronix ++ * Copyright (C) 2006 Andrey Volkov, Varma Electronics ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the version 2 of the GNU General Public License ++ * as published by the Free Software Foundation ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include <linux/module.h> ++#include <linux/netdevice.h> ++#include <linux/if_arp.h> ++#include <linux/can.h> ++#include <linux/can/dev.h> ++ ++MODULE_DESCRIPTION("CAN netdevice library"); ++MODULE_LICENSE("GPL v2"); ++MODULE_AUTHOR("Marc Kleine-Budde <mkl@pengutronix.de>, " ++ "Andrey Volkov <avolkov@varma-el.com>"); ++ ++/* ++ Abstract: ++ Baud rate calculated with next formula: ++ baud = frq/(brp*(1 + prop_seg+ phase_seg1 + phase_seg2)) ++ ++ This calc function based on work of Florian Hartwich and Armin Bassemi ++ "The Configuration of the CAN Bit Timing" ++ (http://www.semiconductors.bosch.de/pdf/CiA99Paper.pdf) ++ ++ Parameters: ++ [in] ++ bit_time_nsec - expected bit time in nanosecs ++ ++ [out] ++ bit_time - calculated time segments, for meaning of ++ each field read CAN standard. ++*/ ++ ++#define DEFAULT_MAX_BRP 64U ++#define DEFAULT_MAX_SJW 4U ++ ++/* All below values in tq units */ ++#define MAX_BIT_TIME 25U ++#define MIN_BIT_TIME 8U ++#define MAX_PROP_SEG 8U ++#define MAX_PHASE_SEG1 8U ++#define MAX_PHASE_SEG2 8U ++ ++int can_calc_bit_time(struct can_priv *can, u32 baudrate, ++ struct can_bittime_std *bit_time) ++{ ++ int best_error = -1; /* Ariphmetic error */ ++ int df, best_df = -1; /* oscillator's tolerance range */ ++ u32 quanta; /*in tq units*/ ++ u32 brp, phase_seg1, phase_seg2, sjw, prop_seg; ++ u32 brp_min, brp_max, brp_expected; ++ u64 tmp; ++ ++ /* baudrate range [1baud,1Mbaud] */ ++ if (baudrate == 0 || baudrate > 1000000UL) ++ return -EINVAL; ++ ++ tmp = (u64)can->can_sys_clock*1000; ++ do_div(tmp, baudrate); ++ brp_expected = (u32)tmp; ++ ++ brp_min = brp_expected / (1000 * MAX_BIT_TIME); ++ if (brp_min == 0) ++ brp_min = 1; ++ if (brp_min > can->max_brp) ++ return -ERANGE; ++ ++ brp_max = (brp_expected + 500 * MIN_BIT_TIME) / (1000 * MIN_BIT_TIME); ++ if (brp_max == 0) ++ brp_max = 1; ++ if (brp_max > can->max_brp) ++ brp_max = can->max_brp; ++ ++ for (brp = brp_min; brp <= brp_max; brp++) { ++ quanta = brp_expected / (brp * 1000); ++ if (quanta < MAX_BIT_TIME && quanta * brp * 1000 != ++ brp_expected) ++ quanta++; ++ if (quanta < MIN_BIT_TIME || quanta > MAX_BIT_TIME) ++ continue; ++ ++ phase_seg2 = min((quanta - 3) / 2, MAX_PHASE_SEG2); ++ for (sjw = can->max_sjw; sjw > 0; sjw--) { ++ for (; phase_seg2 > sjw; phase_seg2--) { ++ u32 err1, err2; ++ phase_seg1 = phase_seg2 % 2 ? ++ phase_seg2-1 : phase_seg2; ++ prop_seg = quanta-1 - phase_seg2 - phase_seg1; ++ /* ++ * FIXME: support of longer lines ++ * (i.e. bigger prop_seg) is more prefered ++ * than support of cheap oscillators ++ * (i.e. bigger df/phase_seg1/phase_seg2) ++ * */ ++ ++ if (prop_seg < phase_seg1) ++ continue; ++ if (prop_seg > MAX_PROP_SEG) ++ goto next_brp; ++ ++ err1 = phase_seg1 * brp * 500 * 1000 / ++ (13 * brp_expected - phase_seg2 * ++ brp * 1000); ++ err2 = sjw * brp * 50 * 1000 / brp_expected; ++ ++ df = min(err1, err2); ++ if (df >= best_df) { ++ unsigned error = abs(brp_expected * 10 / ++ (brp * (1 + prop_seg + ++ phase_seg1 + ++ phase_seg2)) - 10000); ++ ++ if (error > 10 || error > best_error) ++ continue; ++ ++ if (error == best_error && prop_seg < ++ bit_time->prop_seg) ++ continue; ++ ++ best_error = error; ++ best_df = df; ++ bit_time->brp = brp; ++ bit_time->prop_seg = prop_seg; ++ bit_time->phase_seg1 = phase_seg1; ++ bit_time->phase_seg2 = phase_seg2; ++ bit_time->sjw = sjw; ++ bit_time->sam = ++ (bit_time->phase_seg1 > 3); ++ } ++ } ++ } ++next_brp: ; ++ } ++ ++ if (best_error < 0) ++ return -EDOM; ++ return 0; ++} ++EXPORT_SYMBOL(can_calc_bit_time); ++ ++static int can_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) ++{ ++ struct can_priv *can = netdev_priv(dev); ++ struct can_bittime *bt = (struct can_bittime *)&ifr->ifr_ifru; ++ ulong *baudrate = (ulong *)&ifr->ifr_ifru; ++ int ret = -EOPNOTSUPP; ++ ++ dev_dbg(ND2D(dev), "(%s) 0x%08x %p\n", __func__, cmd, &ifr->ifr_ifru); ++ ++ switch (cmd) { ++ case SIOCSCANBAUDRATE: ++ if (can->do_set_bit_time) { ++ struct can_bittime bit_time; ++ ret = can_calc_bit_time(can, *baudrate, &bit_time.std); ++ if (ret != 0) ++ break; ++ bit_time.type = CAN_BITTIME_STD; ++ ret = can->do_set_bit_time(dev, &bit_time); ++ if (!ret) { ++ can->baudrate = *baudrate; ++ can->bit_time = bit_time; ++ } ++ } ++ break; ++ case SIOCGCANBAUDRATE: ++ *baudrate = can->baudrate; ++ ret = 0; ++ break; ++ case SIOCSCANCUSTOMBITTIME: ++ if (can->do_set_bit_time) { ++ ret = can->do_set_bit_time(dev, bt); ++ if (!ret) { ++ can->bit_time = *bt; ++ if (bt->type == CAN_BITTIME_STD && bt->std.brp) { ++ can->baudrate = can->can_sys_clock / ++ (bt->std.brp * (1 + bt->std.prop_seg + ++ bt->std.phase_seg1 + ++ bt->std.phase_seg2)); ++ } else ++ can->baudrate = CAN_BAUDRATE_UNKNOWN; ++ } ++ } ++ break; ++ case SIOCGCANCUSTOMBITTIME: ++ *bt = can->bit_time; ++ ret = 0; ++ break; ++ case SIOCSCANMODE: ++ if (can->do_set_mode) { ++ can_mode_t mode = ++ *((can_mode_t *)(&ifr->ifr_ifru)); ++ if (mode == CAN_MODE_START && ++ can->baudrate == CAN_BAUDRATE_UNCONFIGURED) { ++ dev_info(ND2D(dev), "Impossible to start \ ++ on UNKNOWN speed\n"); ++ ret = EINVAL; ++ } else ++ return can->do_set_mode(dev, mode); ++ } ++ break; ++ case SIOCGCANMODE: ++ *((can_mode_t *)(&ifr->ifr_ifru)) = can->mode; ++ ret = 0; ++ break; ++ case SIOCSCANCTRLMODE: ++ if (can->do_set_ctrlmode) { ++ can_ctrlmode_t ctrlmode = ++ *((can_ctrlmode_t *)(&ifr->ifr_ifru)); ++ return can->do_set_ctrlmode(dev, ctrlmode); ++ } ++ break; ++ case SIOCGCANCTRLMODE: ++ *((can_ctrlmode_t *)(&ifr->ifr_ifru)) = can->ctrlmode; ++ ret = 0; ++ break; ++ case SIOCSCANFILTER: ++ break; ++ case SIOCGCANFILTER: ++ break; ++ case SIOCGCANSTATE: ++ if (can->do_get_state) ++ return can->do_get_state(dev, ++ (can_state_t *)(&ifr->ifr_ifru)); ++ break; ++ case SIOCGCANSTATS: ++ *((struct can_device_stats *)(&ifr->ifr_ifru)) = can->can_stats; ++ ret = 0; ++ break; ++ } ++ ++ return ret; ++} ++ ++static void can_setup(struct net_device *dev) ++{ ++ dev->type = ARPHRD_CAN; ++ dev->mtu = sizeof(struct can_frame); ++ dev->do_ioctl = can_ioctl; ++ dev->hard_header_len = 0; ++ dev->addr_len = 0; ++ dev->tx_queue_len = 10; ++ ++ /* New-style flags. */ ++ dev->flags = IFF_NOARP; ++ dev->features = NETIF_F_NO_CSUM; ++} ++ ++/* ++ * Function alloc_candev ++ * Allocates and sets up an CAN device ++ */ ++struct net_device *alloc_candev(int sizeof_priv) ++{ ++ struct net_device *dev; ++ struct can_priv *priv; ++ ++ dev = alloc_netdev(sizeof_priv, "can%d", can_setup); ++ if (!dev) ++ return NULL; ++ ++ priv = netdev_priv(dev); ++ ++ priv->baudrate = CAN_BAUDRATE_UNCONFIGURED; ++ priv->max_brp = DEFAULT_MAX_BRP; ++ priv->max_sjw = DEFAULT_MAX_SJW; ++ spin_lock_init(&priv->irq_lock); ++ ++ return dev; ++} ++EXPORT_SYMBOL(alloc_candev); ++ ++void free_candev(struct net_device *dev) ++{ ++ free_netdev(dev); ++} ++EXPORT_SYMBOL(free_candev); +--- a/net/can/Makefile ++++ b/net/can/Makefile +@@ -10,3 +10,6 @@ can-raw-objs := raw.o + + obj-$(CONFIG_CAN_BCM) += can-bcm.o + can-bcm-objs := bcm.o ++ ++obj-$(CONFIG_CAN) += candev.o ++candev-objs := dev.o +--- a/net/irda/irlap.c ++++ b/net/irda/irlap.c +@@ -627,7 +627,7 @@ void irlap_status_indication(struct irla + { + switch (quality_of_link) { + case STATUS_NO_ACTIVITY: +- IRDA_MESSAGE("IrLAP, no activity on link!\n"); ++ /* IRDA_MESSAGE("IrLAP, no activity on link!\n"); */ + break; + case STATUS_NOISY: + IRDA_MESSAGE("IrLAP, noisy link!\n"); +--- /dev/null ++++ b/scripts/checkfiles +@@ -0,0 +1,35 @@ ++#!/bin/sh ++# (c) 2007, Erez Zadok <ezk@cs.sunysb.edu> (initial version) ++# Licensed under the terms of the GNU GPL License version 2 ++# ++# Check source files for compliance with coding standards, using terse ++# output in the style that g/cc produces. This output can be easily parsed ++# within text editors (e.g., emacs/vim) which can produce a split text ++# screen showing in one screen the error message, and in another screen the ++# corresponding source file, with the cursor placed on the offending line. ++# See for example the documentation for Emacs's "next-error" command, often ++# bound to M-x ` (ESC x back-tick). ++ ++# Usage: checkfiles file [files...] ++# if "file" is a directory, will check all *.[hc] files recursively ++ ++# check usage ++usage() { ++ echo "Usage: checkfiles file [files...]" ++ echo "(if \"file\" is a directory, check recursively for all C sources/headers)" ++ exit 1 ++} ++ ++# if test -z "$@" ; then ++# usage ++# fi ++if ! test -f scripts/checkpatch.pl ; then ++ echo "checkfiles: must run from top level source tree" ++ exit 1 ++fi ++ ++# check coding-style compliance of each source file found ++find "$@" -type f -name '*.[hc]' | \ ++while read f ; do ++ diff -u /dev/null $f | perl scripts/checkpatch.pl - ++done +--- /dev/null ++++ b/scripts/checkfilesterse +@@ -0,0 +1,34 @@ ++#!/bin/sh ++# (c) 2007, Erez Zadok <ezk@cs.sunysb.edu> (initial version) ++# Licensed under the terms of the GNU GPL License version 2 ++# ++# Check source files for compliance with coding standards, using terse ++# output in the style that g/cc produces. This output can be easily parsed ++# within text editors (e.g., emacs/vim) which can produce a split text ++# screen showing in one screen the error message, and in another screen the ++# corresponding source file, with the cursor placed on the offending line. ++# See for example the documentation for Emacs's "next-error" command, often ++# bound to M-x ` (ESC x back-tick). ++ ++# Usage: checkfiles file [files...] ++# if "file" is a directory, will check all *.[hc] files recursively ++ ++# check usage ++usage() { ++ echo "Usage: checkfiles file [files...]" ++ echo "(if \"file\" is a directory, check recursively for all C sources/headers)" ++ exit 1 ++} ++if test -z "" ; then ++ usage ++fi ++if ! test -f scripts/checkpatch.pl ; then ++ echo "checkfiles: must run from top level source tree" ++ exit 1 ++fi ++ ++# check coding-style compliance of each source file found, using terse output ++find "$@" -type f -name '*.[hc]' | \ ++while read f ; do ++ diff -u /dev/null $f | perl scripts/checkpatch.pl -t - ++done diff --git a/toolchain/gcc/Config.in b/toolchain/gcc/Config.in index 6c141e3..18891b5 100644 --- a/toolchain/gcc/Config.in +++ b/toolchain/gcc/Config.in @@ -8,6 +8,7 @@ choice default GCC_VERSION_4_2_4 if TARGET_ppc44x default GCC_VERSION_4_3_3 if TARGET_ps3_petitboot default GCC_VERSION_4_3_3 if TARGET_etrax + default GCC_VERSION_4_3_3 if TARGET_coldfire default GCC_VERSION_4_1_2 help Select the version of gcc you wish to use. diff --git a/toolchain/gcc/Config.version b/toolchain/gcc/Config.version index a99cd53..1da3bdb 100644 --- a/toolchain/gcc/Config.version +++ b/toolchain/gcc/Config.version @@ -50,4 +50,5 @@ if !TOOLCHAINOPTS config GCC_VERSION_4_3_3 default y if TARGET_ps3_petitboot default y if TARGET_etrax + default y if TARGET_coldfire endif diff --git a/toolchain/uClibc/config-0.9.30+nptl/m68k b/toolchain/uClibc/config-0.9.30+nptl/m68k new file mode 100644 index 0000000..ae98491 --- /dev/null +++ b/toolchain/uClibc/config-0.9.30+nptl/m68k @@ -0,0 +1,5 @@ +ARCH_BIG_ENDIAN=y +TARGET_ARCH="m68k" +TARGET_SUBARCH="" +TARGET_m68k=y +UCLIBC_HAS_LONG_DOUBLE_MATH=y diff --git a/toolchain/uClibc/config-0.9.30.1/m68k b/toolchain/uClibc/config-0.9.30.1/m68k new file mode 100644 index 0000000..ae98491 --- /dev/null +++ b/toolchain/uClibc/config-0.9.30.1/m68k @@ -0,0 +1,5 @@ +ARCH_BIG_ENDIAN=y +TARGET_ARCH="m68k" +TARGET_SUBARCH="" +TARGET_m68k=y +UCLIBC_HAS_LONG_DOUBLE_MATH=y |