diff options
| -rw-r--r-- | target/linux/lantiq/patches-3.7/0115-NET-PHY-adds-driver-for-lantiq-PHY11G.patch | 122 |
1 files changed, 80 insertions, 42 deletions
diff --git a/target/linux/lantiq/patches-3.7/0115-NET-PHY-adds-driver-for-lantiq-PHY11G.patch b/target/linux/lantiq/patches-3.7/0115-NET-PHY-adds-driver-for-lantiq-PHY11G.patch index 7d3a6b9..2436974 100644 --- a/target/linux/lantiq/patches-3.7/0115-NET-PHY-adds-driver-for-lantiq-PHY11G.patch +++ b/target/linux/lantiq/patches-3.7/0115-NET-PHY-adds-driver-for-lantiq-PHY11G.patch @@ -11,13 +11,13 @@ Signed-off-by: John Crispin <blogic@openwrt.org> 3 files changed, 184 insertions(+) create mode 100644 drivers/net/phy/lantiq.c -diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig -index 961f0b2..41a2992 100644 ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -107,6 +107,11 @@ config MICREL_PHY +Index: linux-3.7.1/drivers/net/phy/Kconfig +=================================================================== +--- linux-3.7.1.orig/drivers/net/phy/Kconfig 2012-12-21 10:30:28.953462268 +0100 ++++ linux-3.7.1/drivers/net/phy/Kconfig 2012-12-21 10:30:29.609462283 +0100 +@@ -150,6 +150,11 @@ ---help--- - Supports the KSZ9021, VSC8201, KS8001 PHYs. + Currently has a driver for the KSZ8041 +config LANTIQ_PHY + tristate "Driver for Lantiq PHYs" @@ -27,11 +27,11 @@ index 961f0b2..41a2992 100644 config FIXED_PHY bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" depends on PHYLIB=y -diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile -index 9645e38..e2eeee3 100644 ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -23,6 +23,7 @@ obj-$(CONFIG_NATIONAL_PHY) += national.o +Index: linux-3.7.1/drivers/net/phy/Makefile +=================================================================== +--- linux-3.7.1.orig/drivers/net/phy/Makefile 2012-12-21 10:30:28.953462268 +0100 ++++ linux-3.7.1/drivers/net/phy/Makefile 2012-12-21 10:30:29.609462283 +0100 +@@ -38,6 +38,7 @@ obj-$(CONFIG_DP83640_PHY) += dp83640.o obj-$(CONFIG_STE10XP) += ste10Xp.o obj-$(CONFIG_MICREL_PHY) += micrel.o @@ -39,12 +39,11 @@ index 9645e38..e2eeee3 100644 obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o obj-$(CONFIG_AT803X_PHY) += at803x.o -diff --git a/drivers/net/phy/lantiq.c b/drivers/net/phy/lantiq.c -new file mode 100644 -index 0000000..ba4d7b7 ---- /dev/null -+++ b/drivers/net/phy/lantiq.c -@@ -0,0 +1,178 @@ +Index: linux-3.7.1/drivers/net/phy/lantiq.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-3.7.1/drivers/net/phy/lantiq.c 2012-12-21 11:47:10.721571920 +0100 +@@ -0,0 +1,220 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by @@ -182,39 +181,81 @@ index 0000000..ba4d7b7 + return err; +} + -+/* TODO: add vr9_gphy_22f_driver and drivers for external Lantiq PEF7071 PHYs */ -+static struct phy_driver vr9_gphy_11g_driver = { -+ .phy_id = 0xd565a408, -+ .phy_id_mask = 0xfffffff0, -+ .name = "Lantiq XWAY VR9 GPHY 11G", -+ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause), -+ .flags = 0, /*PHY_HAS_INTERRUPT,*/ -+ .config_init = vr9_gphy_config_init, -+ .config_aneg = vr9_gphy_config_aneg, -+ .read_status = genphy_read_status, -+ .ack_interrupt = vr9_gphy_ack_interrupt, -+ .did_interrupt = vr9_gphy_did_interrupt, -+ .config_intr = vr9_gphy_config_intr, -+ .driver = { .owner = THIS_MODULE }, ++static struct phy_driver lantiq_phy[] = { ++ { ++ .phy_id = 0xd565a400, ++ .phy_id_mask = 0xffffffff, ++ .name = "Lantiq XWAY PEF7071", ++ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause), ++ .flags = 0, /*PHY_HAS_INTERRUPT,*/ ++ .config_init = vr9_gphy_config_init, ++ .config_aneg = vr9_gphy_config_aneg, ++ .read_status = genphy_read_status, ++ .ack_interrupt = vr9_gphy_ack_interrupt, ++ .did_interrupt = vr9_gphy_did_interrupt, ++ .config_intr = vr9_gphy_config_intr, ++ .driver = { .owner = THIS_MODULE }, ++ }, { ++ .phy_id = 0x030260D0, ++ .phy_id_mask = 0xfffffff0, ++ .name = "Lantiq XWAY VR9 GPHY 11G v1.3", ++ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause), ++ .flags = 0, /*PHY_HAS_INTERRUPT,*/ ++ .config_init = vr9_gphy_config_init, ++ .config_aneg = vr9_gphy_config_aneg, ++ .read_status = genphy_read_status, ++ .ack_interrupt = vr9_gphy_ack_interrupt, ++ .did_interrupt = vr9_gphy_did_interrupt, ++ .config_intr = vr9_gphy_config_intr, ++ .driver = { .owner = THIS_MODULE }, ++ }, { ++ .phy_id = 0xd565a408, ++ .phy_id_mask = 0xfffffff8, ++ .name = "Lantiq XWAY VR9 GPHY 11G v1.4", ++ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause), ++ .flags = 0, /*PHY_HAS_INTERRUPT,*/ ++ .config_init = vr9_gphy_config_init, ++ .config_aneg = vr9_gphy_config_aneg, ++ .read_status = genphy_read_status, ++ .ack_interrupt = vr9_gphy_ack_interrupt, ++ .did_interrupt = vr9_gphy_did_interrupt, ++ .config_intr = vr9_gphy_config_intr, ++ .driver = { .owner = THIS_MODULE }, ++ }, { ++ .phy_id = 0xd565a418, ++ .phy_id_mask = 0xfffffff8, ++ .name = "Lantiq XWAY XRX PHY22F v1.4", ++ .features = (SUPPORTED_Pause), ++ .flags = 0, /*PHY_HAS_INTERRUPT,*/ ++ .config_init = vr9_gphy_config_init, ++ .config_aneg = vr9_gphy_config_aneg, ++ .read_status = genphy_read_status, ++ .ack_interrupt = vr9_gphy_ack_interrupt, ++ .did_interrupt = vr9_gphy_did_interrupt, ++ .config_intr = vr9_gphy_config_intr, ++ .driver = { .owner = THIS_MODULE }, ++ }, +}; + +static int __init ltq_phy_init(void) +{ -+ int err; ++ int i; + -+ err = phy_driver_register(&vr9_gphy_11g_driver); -+ if (err) -+ goto err_out; ++ for (i = 0; i < ARRAY_SIZE(lantiq_phy); i++) { ++ int err = phy_driver_register(&lantiq_phy[i]); ++ if (err) ++ pr_err("lantiq_phy: failed to load %s\n", lantiq_phy[i].name); ++ } + + return 0; -+ -+err_out: -+ return err; +} + +static void __exit ltq_phy_exit(void) +{ -+ phy_driver_unregister(&vr9_gphy_11g_driver); ++ int i; ++ ++ for (i = 0; i < ARRAY_SIZE(lantiq_phy); i++) ++ phy_driver_unregister(&lantiq_phy[i]); +} + +module_init(ltq_phy_init); @@ -223,6 +264,3 @@ index 0000000..ba4d7b7 +MODULE_DESCRIPTION("Lantiq PHY drivers"); +MODULE_AUTHOR("Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>"); +MODULE_LICENSE("GPL"); --- -1.7.10.4 - |