diff options
11 files changed, 251 insertions, 4 deletions
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 866003c..fe925c0 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -111,6 +111,9 @@ get_status_led() { wr512-3gn) status_led="wr512:green:wps" ;; + wnce2001) + status_led="netgear:green:power" + ;; mzk-w300nh2) status_led="mzkw300nh2:green:power" ;; diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index b6490b5..5915a02 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -93,6 +93,7 @@ case "$FIRMWARE" in wl-330n3g | \ wl-351 | \ wli-tx4-ag300n | \ + wnce2001 | \ wr512-3gn | \ wr6202 | \ mzk-w300nh2 | \ diff --git a/target/linux/ramips/base-files/etc/uci-defaults/01_leds b/target/linux/ramips/base-files/etc/uci-defaults/01_leds index bb8a5dc..cd17d7f 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/01_leds +++ b/target/linux/ramips/base-files/etc/uci-defaults/01_leds @@ -112,6 +112,9 @@ case $board in wcr-150gn) set_usb_led "wcr150gn:amber:user" ;; + wnce2001) + set_wifi_led "netgear:green:wlan" + ;; esac ucidef_commit_leds diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network index 9c1936e..e28f2b5 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/02_network +++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network @@ -41,7 +41,8 @@ ramips_setup_interfaces() w150m | \ all0256n | \ all5002 | \ - broadway) + broadway | \ + wnce2001) ucidef_add_switch "switch0" "1" "0" ucidef_set_interface_lan "eth0" ;; @@ -242,7 +243,8 @@ ramips_setup_macs() all0239-3g | \ carambola | \ - w502u) + w502u | \ + wnce2001) lan_mac=$(mtd_get_mac_binary factory 40) wan_mac=$(mtd_get_mac_binary factory 46) ;; diff --git a/target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming b/target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming new file mode 100644 index 0000000..67a1746 --- /dev/null +++ b/target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming @@ -0,0 +1,43 @@ +#!/bin/sh + +# Netgear WNCE2001 has does a checksum check on boot and goes into recovery +# tftp mode when the check fails. Initializing the JFFS2 partition triggers +# this, so we make sure to zero checksum and size to be checksummed before +# that happens, so this needs to run very early during boot. + +do_wnce2001_checksumming_disable() { + . /lib/ramips.sh + + local board=$(ramips_board_name) + + case "$board" in + wnce2001) + echo "Board is WNCE2001, updating checksum partition..." + local zeroes=/dev/zero + local tmpfile=/tmp/wnce2001_checksum + local partname=checksum + local mtd=$(find_mtd_part $partname) + dd if=$mtd of=$tmpfile bs=80 count=1 2>/dev/null + signature=$(dd if=$tmpfile bs=1 skip=24 count=20 2>/dev/null) + checksum=$(dd if=$tmpfile bs=1 count=4 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"') + if [ "$signature" != "RT3052-AP-WNCE2001-3" ]; then + echo "Signature of checksum partition is wrong, bailing." + return 0 + fi + if [ "$checksum" != "00000000" ]; then + echo "Checksum is set, zeroing." + # zero out checksum + dd if=$zeroes of=$tmpfile conv=notrunc bs=1 seek=0 count=4 2>/dev/null + # zero out bytecount to be checksummed + dd if=$zeroes of=$tmpfile conv=notrunc bs=1 seek=60 count=4 2>/dev/null + mtd write $tmpfile $partname + else + echo "Checksum is already zero, nothing to do." + fi + ;; + esac + + return 0 +} + +boot_hook_add preinit_main do_wnce2001_checksumming_disable diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac index 7824e2b..52bf115 100644 --- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac +++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac @@ -64,6 +64,7 @@ preinit_set_mac_address() { w306r-v20 |\ w502u |\ wr6202 |\ + wnce2001 |\ xdxrn502j) mac=$(mtd_get_mac_binary factory 40) ifconfig eth0 hw ether $mac 2>/dev/null diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index c89dd46..37b477a 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -120,6 +120,9 @@ ramips_board_detect() { *"NBG-419N") name="nbg-419n" ;; + *"Netgear WNCE2001") + name="wnce2001" + ;; *"NexAira BC2") name="bc2" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 34d2c54..ef15044 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -59,6 +59,7 @@ platform_check_image() { wl341v3 | \ wl-330n | \ wl-351 | \ + wnce2001 | \ wli-tx4-ag300n | \ whr-g300n |\ ur-326n4g |\ diff --git a/target/linux/ramips/dts/WNCE2001.dts b/target/linux/ramips/dts/WNCE2001.dts new file mode 100644 index 0000000..1aa1e2c --- /dev/null +++ b/target/linux/ramips/dts/WNCE2001.dts @@ -0,0 +1,142 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "WNCE2001", "ralink,rt3052-soc"; + model = "Netgear WNCE2001"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "spi", "uartlite", "jtag", "sdram"; + ralink,gpiomux = "i2c", "mdio", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l3205d"; + reg = <0 0>; + linux,modalias = "m25p80", "mx25l3205d"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + factory: partition@30000 { + label = "factory"; + reg = <0x30000 0x10000>; + read-only; + }; + + partition@40000 { + label = "config"; + reg = <0x40000 0x20000>; + read-only; + }; + + partition@60000 { + label = "language"; + reg = <0x60000 0x30000>; + read-only; + }; + + partition@90000 { + label = "pot"; + reg = <0x90000 0x10000>; + read-only; + }; + + partition@a0000 { + label = "checksum"; + reg = <0xa0000 0x10000>; + }; + + partition@b0000 { + label = "firmware"; + reg = <0xb0000 0x350000>; + }; + }; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + }; + + wmac@10180000 { + status = "okay"; + }; + + gpio-leds { + compatible = "gpio-leds"; + power-green { + label = "netgear:green:power"; + gpios = <&gpio0 8 1>; + }; + power-red { + label = "netgear:red:power"; + gpios = <&gpio0 9 1>; + }; + wlan-green { + label = "netgear:green:wlan"; + gpios = <&gpio0 12 0>; + }; + wlan-red { + label = "netgear:red:wlan"; + gpios = <&gpio0 13 0>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + rt { + label = "rt"; + gpios = <&gpio0 11 1>; + linux,code = <0x100>; + }; + ap { + label = "ap"; + gpios = <&gpio0 7 1>; + linux,code = <0x101>; + }; + }; +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 0002eb4..eaa1fcf 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -392,6 +392,18 @@ Image/Build/Profile/WL341V3=$(call BuildFirmware/WL341V3/$(1),$(1)) Image/Build/Profile/WL-351=$(call BuildFirmware/Default4M/$(1),$(1),wl-351,WL-351) +define BuildFirmware/WNCE2001/squashfs + $(call BuildFirmware/Default4M/$(1),$(1),$(2),$(3)) + -mkdapimg -s RT3052-AP-WNCE2001-3 -r WW -v 1.0.0.99 \ + -i $(call sysupname,$(1),$(2)) \ + -o $(call imgname,$(1),$(2))-factory-worldwide.bin + -mkdapimg -s RT3052-AP-WNCE2001-3 -r NA -v 1.0.0.99 \ + -i $(call sysupname,$(1),$(2)) \ + -o $(call imgname,$(1),$(2))-factory-northamerica.bin +endef +BuildFirmware/WNCE2001/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3)) +Image/Build/Profile/WNCE2001=$(call BuildFirmware/WNCE2001/$(1),$(1),wnce2001,WNCE2001) + Image/Build/Profile/WR512-3GN=$(call BuildFirmware/DefaultDualSize/$(1),$(1),wr512-3ng,WR512-3GN) Image/Build/Profile/UR-326N4G=$(call BuildFirmware/Default4M/$(1),$(1),ur-326n4g,UR-326N4G) @@ -451,6 +463,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/WL_330N3G,$(1)) $(call Image/Build/Profile/WL341V3,$(1)) $(call Image/Build/Profile/WL-351,$(1)) + $(call Image/Build/Profile/WNCE2001,$(1)) $(call Image/Build/Profile/WR512-3GN,$(1)) $(call Image/Build/Profile/WR6202,$(1)) $(call Image/Build/Profile/XDXRN502J,$(1)) diff --git a/tools/firmware-utils/src/mkdapimg.c b/tools/firmware-utils/src/mkdapimg.c index 8b0359f..ed662d8 100644 --- a/tools/firmware-utils/src/mkdapimg.c +++ b/tools/firmware-utils/src/mkdapimg.c @@ -27,6 +27,8 @@ #define MAX_MODEL_NAME_LEN 20 #define MAX_SIG_LEN 30 +#define MAX_REGION_LEN 4 +#define MAX_VERSION_LEN 12 struct img_hdr_struct { uint32_t checksum; @@ -51,7 +53,7 @@ perrexit(int code, char *msg) void usage() { - fprintf(stderr, "usage: %s [-p] [-m model] -s signature -i input -o output\n", progname); + fprintf(stderr, "usage: %s [-p] [-m model] [-r region] [-v version] -s signature -i input -o output\n", progname); exit(1); } @@ -60,8 +62,11 @@ main(int ac, char *av[]) { char model[MAX_MODEL_NAME_LEN+1]; char signature[MAX_SIG_LEN+1]; + char region[MAX_REGION_LEN+1]; + char version[MAX_VERSION_LEN+1]; int patchmode = 0; int fixmode = 0; + int have_regionversion = 0; FILE *ifile, *ofile; int c; @@ -71,11 +76,13 @@ main(int ac, char *av[]) progname = basename(av[0]); memset(model, 0, sizeof(model)); memset(signature, 0, sizeof(signature)); + memset(region, 0, sizeof(region)); + memset(version, 0, sizeof(version)); while ( 1 ) { int c; - c = getopt(ac, av, "pxm:s:i:o:"); + c = getopt(ac, av, "pxm:r:v:s:i:o:"); if (c == -1) break; @@ -94,6 +101,24 @@ main(int ac, char *av[]) } strcpy(model, optarg); break; + case 'r': + if (strlen(optarg) > MAX_REGION_LEN) { + fprintf(stderr, "%s: region exceeds %d chars\n", + progname, MAX_REGION_LEN); + exit(1); + } + have_regionversion = 1; + strcpy(region, optarg); + break; + case 'v': + if (strlen(optarg) > MAX_VERSION_LEN) { + fprintf(stderr, "%s: version exceeds %d chars\n", + progname, MAX_VERSION_LEN); + exit(1); + } + have_regionversion = 1; + strcpy(version, optarg); + break; case 's': if (strlen(optarg) > MAX_SIG_LEN) { fprintf(stderr, "%s: signature exceeds %d chars\n", @@ -150,6 +175,10 @@ main(int ac, char *av[]) imghdr.checksum = htonl(cksum); imghdr.partition = 0 ; // don't care? imghdr.hdr_len = sizeof(imghdr); + if (have_regionversion) { + imghdr.hdr_len += MAX_REGION_LEN; + imghdr.hdr_len += MAX_VERSION_LEN; + } imghdr.flash_byte_cnt = htonl(bcnt); } else { if (ntohl(imghdr.checksum) != cksum) { @@ -176,6 +205,12 @@ main(int ac, char *av[]) if (fwrite(&imghdr, sizeof(imghdr), 1, ofile) < 0) perrexit(2, "fwrite header on output"); + if (have_regionversion) { + if (fwrite(®ion, MAX_REGION_LEN, 1, ofile) < 0) + perrexit(2, "fwrite header on output"); + if (fwrite(&version, MAX_VERSION_LEN, 1, ofile) < 0) + perrexit(2, "fwrite header on output"); + } while ((c = fgetc(ifile)) != EOF) { if (fputc(c, ofile) == EOF) |