diff options
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/01_leds | 5 | ||||
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/02_network | 1 | ||||
| -rw-r--r-- | target/linux/ramips/base-files/etc/diag.sh | 3 | ||||
| -rwxr-xr-x | target/linux/ramips/base-files/lib/upgrade/platform.sh | 1 | ||||
| -rw-r--r-- | target/linux/ramips/dts/WR1200JS.dts | 139 | ||||
| -rw-r--r-- | target/linux/ramips/image/mt7621.mk | 9 |
6 files changed, 157 insertions, 1 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index a34abbb..1a8e376 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -495,6 +495,11 @@ y1s) ucidef_set_led_netdev "wifi5g" "WIFI5G" "$boardname:blue:wifi" "wlan0" ucidef_set_led_netdev "wan" "WAN" "$boardname:blue:internet" "eth0.2" "tx rx" ;; +youhua,wr1200js) + ucidef_set_led_switch "internet" "INTERNET" "$boardname:green:wan" "switch0" "0x01" + ucidef_set_led_usbdev "usb" "USB" "$boardname:blue:usb" "1-2" + ucidef_set_led_default "wps" "wps" "$boardname:blue:wps" "0" + ;; zbt-ape522ii) ucidef_set_led_netdev "wlan2g4" "wlan1-link" "$boardname:green:wlan2g4" "wlan1" ucidef_set_led_netdev "sys1" "wlan1" "$boardname:green:sys1" "wlan1" "tx rx" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 8f3a95d..0f173bc 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -210,6 +210,7 @@ ramips_setup_interfaces() wrtnode|\ wrtnode2p | \ wrtnode2r | \ + youhua,wr1200js|\ zbt-wa05) ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0" diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 7b90f6b..cbaa2d6 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -132,7 +132,8 @@ get_status_led() { status_led="$boardname:yellow:status" ;; cy-swr1100|\ - w502u) + w502u|\ + youhua,wr1200js) status_led="$boardname:blue:wps" ;; d240|\ diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index c58102c..473b2c4 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -203,6 +203,7 @@ platform_check_image() { x8|\ y1|\ y1s|\ + youhua,wr1200js|\ we1026-5g-16m|\ zbt-ape522ii|\ zbt-cpe102|\ diff --git a/target/linux/ramips/dts/WR1200JS.dts b/target/linux/ramips/dts/WR1200JS.dts new file mode 100644 index 0000000..2169e74 --- /dev/null +++ b/target/linux/ramips/dts/WR1200JS.dts @@ -0,0 +1,139 @@ +/dts-v1/; + +#include "mt7621.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + compatible = "youhua,wr1200js", "mediatek,mt7621-soc"; + model = "YouHua WR1200JS"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + gpio-leds { + compatible = "gpio-leds"; + + internet { + label = "wr1200js:blue:internet"; + gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "wr1200js:blue:wps"; + gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + }; + + usb { + label = "wr1200js:blue:usb"; + gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + + wps { + label = "wps"; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + + wifi { + label = "wifi"; + gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RFKILL>; + }; + }; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + m25p,chunked-io = <32>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + }; +}; + +&pcie { + status = "okay"; + + pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x0000>; + }; + }; + + pcie1 { + mt76@1,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + + led { + led-sources = <2>; + led-active-low; + }; + }; + }; +}; + +ðernet { + mtd-mac-address = <&factory 0xe000>; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "uart2", "uart3", "wdt"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 18b6934..d78175c 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -328,6 +328,15 @@ define Device/wndr3700v5 endef TARGET_DEVICES += wndr3700v5 +define Device/youhua_wr1200js + DTS := WR1200JS + IMAGE_SIZE := 16064k + DEVICE_TITLE := YouHua WR1200JS + DEVICE_PACKAGES := \ + kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport +endef +TARGET_DEVICES += youhua_wr1200js + define Device/wsr-1166 DTS := WSR-1166 IMAGE/sysupgrade.bin := trx | pad-rootfs | append-metadata |