diff options
12 files changed, 116 insertions, 2 deletions
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index f8dac49..95f608a 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -69,7 +69,7 @@ get_status_led() { rt-n10-plus) status_led="asus:green:wps" ;; - rt-n56u) + rt-n56u | wl-330n ) status_led="asus:blue:power" ;; sl-r7205) diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index bc23208..7bd58d5 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -67,6 +67,7 @@ case "$FIRMWARE" in w502u | \ wcr-150gn | \ whr-g300n | \ + wl-330n | \ wl-351 | \ wli-tx4-ag300n | \ wr512-3gn | \ diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network index 77b65cb..a17fad8 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/network +++ b/target/linux/ramips/base-files/etc/uci-defaults/network @@ -16,7 +16,8 @@ ramips_setup_interfaces() ucidef_set_interface_loopback case $board in - all0256n) + all0256n | \ + wl-330n) ucidef_set_interface_lan "eth0.1" ;; diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac index 97cacfa..90c327a 100644 --- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac +++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac @@ -28,6 +28,7 @@ preinit_set_mac_address() { nbg-419n |\ omni-emb |\ w502u |\ + wl-330n |\ wr6202 |\ xdxrn502j) mac=$(ramips_get_mac_binary factory 40) diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index faa2485..6e1da23 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -53,6 +53,9 @@ ramips_board_name() { *"Argus ATP-52B") name="argus-atp52b" ;; + *"Asus WL-330N") + name="wl-330n" + ;; *"Aztech HW550-3G") name="hw550-3g" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 1f6910d..4d0bb19 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -35,6 +35,7 @@ platform_check_image() { wr6202 |\ v22rw-2x2 | \ wl341v3 | \ + wl-330n | \ wli-tx4-ag300n | \ whr-g300n |\ wr512-3gn) diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h index 8234164..b101dcd 100644 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h +++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h @@ -28,6 +28,7 @@ enum ramips_mach_type { RAMIPS_MACH_RT_G32_B1, /* Asus RT-G32 B1 */ RAMIPS_MACH_RT_N10_PLUS, /* Asus RT-N10+ */ RAMIPS_MACH_NW718, /* Netcore NW718 */ + RAMIPS_MACH_WL_330N, /* Asus WL-330N */ /* RT3052 based machines */ RAMIPS_MACH_ARGUS_ATP52B, /* Argus ATP-52B */ diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig index 1bf960f..6c5a62f 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig @@ -31,6 +31,11 @@ config RT305X_MACH_RT_N10_PLUS select RALINK_DEV_GPIO_BUTTONS select RALINK_DEV_GPIO_LEDS +config RT305X_MACH_WL_330N + bool "Asus WL-330N board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + config RT305X_MACH_HW550_3G bool "Aztech HW550-3G support" select RALINK_DEV_GPIO_BUTTONS diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile index aec57a0..db3c262 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile @@ -32,6 +32,7 @@ obj-$(CONFIG_RT305X_MACH_W502U) += mach-w502u.o obj-$(CONFIG_RT305X_MACH_WCR150GN) += mach-wcr150gn.o obj-$(CONFIG_RT305X_MACH_WHR_G300N) += mach-whr-g300n.o obj-$(CONFIG_RT305X_MACH_WR512_3GN) += mach-wr512-3gn.o +obj-$(CONFIG_RT305X_MACH_WL_330N) += mach-wl-330n.o obj-$(CONFIG_RT305X_MACH_WL341V3) += mach-wl341v3.o obj-$(CONFIG_RT305X_MACH_WL351) += mach-wl351.o obj-$(CONFIG_RT305X_MACH_WR6202) += mach-wr6202.o diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wl-330n.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wl-330n.c new file mode 100644 index 0000000..b548dfe --- /dev/null +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wl-330n.c @@ -0,0 +1,94 @@ +/* + * Asus WL_330N board support + * + * Copyright (C) 2012 Frederic Leroy <fredo@starox.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define WL_330N_GPIO_BUTTON_RESET 10 +#define WL_330N_GPIO_BUTTON_WPS 0 +#define WL_330N_GPIO_LED_LINK 9 +#define WL_330N_GPIO_LED_POWER 11 +#define WL_330N_KEYS_POLL_INTERVAL 20 +#define WL_330N_KEYS_DEBOUNCE_INTERVAL (3 * WL_330N_KEYS_POLL_INTERVAL) + +const struct flash_platform_data wl_330n_flash = { + .type = "mx25l3205d", +}; + +struct spi_board_info wl_330n_spi_slave_info[] __initdata = { + { + .modalias = "m25p80", + .platform_data = &wl_330n_flash, + .irq = -1, + .max_speed_hz = 10000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +static struct gpio_keys_button wl_330n_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WL_330N_KEYS_DEBOUNCE_INTERVAL, + .gpio = WL_330N_GPIO_BUTTON_RESET, + .active_low = 1, + }, + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WL_330N_KEYS_DEBOUNCE_INTERVAL, + .gpio = WL_330N_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static struct gpio_led wl_330n_leds_gpio[] __initdata = { + { + .name = "asus:blue:link", + .gpio = WL_330N_GPIO_LED_LINK, + .active_low = 1, + }, { + .name = "asus:blue:power", + .gpio = WL_330N_GPIO_LED_POWER, + .active_low = 1, + } +}; + +static void __init wl_330n_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + rt305x_register_spi(wl_330n_spi_slave_info, + ARRAY_SIZE(wl_330n_spi_slave_info)); + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(wl_330n_leds_gpio), + wl_330n_leds_gpio); + ramips_register_gpio_buttons(-1, WL_330N_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wl_330n_gpio_buttons), + wl_330n_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_WL_330N, "WL_330N", "Asus WL-330N", + wl_330n_init); diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 97f4a9a..3499c9e 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -378,6 +378,10 @@ define Image/Build/Profile/WHRG300N $(call Image/Build/Template/$(fs_squashfs)/$(1),WHRG300N) endef +define Image/Build/Profile/WL_330N + $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,wl-330n,WL_330N,ttyS1,57600,spi) +endef + define Image/Build/Profile/WL341V3 $(call Image/Build/Template/$(fs_squash)/$(1),WL341V3,wl341v3,WL341V3) endef @@ -421,6 +425,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/W502U,$(1)) $(call Image/Build/Profile/WCR150GN,$(1)) $(call Image/Build/Profile/WHRG300N,$(1)) + $(call Image/Build/Profile/WL_330N,$(1)) $(call Image/Build/Profile/WL341V3,$(1)) $(call Image/Build/Profile/WL351,$(1)) $(call Image/Build/Profile/WR5123GN,$(1)) diff --git a/target/linux/ramips/rt305x/config-3.2 b/target/linux/ramips/rt305x/config-3.2 index cd25acc..4c928a4 100644 --- a/target/linux/ramips/rt305x/config-3.2 +++ b/target/linux/ramips/rt305x/config-3.2 @@ -115,6 +115,7 @@ CONFIG_RT305X_MACH_WCR150GN=y CONFIG_RT305X_MACH_WHR_G300N=y CONFIG_RT305X_MACH_WL341V3=y CONFIG_RT305X_MACH_WL351=y +CONFIG_RT305X_MACH_WL_330N=y CONFIG_RT305X_MACH_WR512_3GN=y CONFIG_RT305X_MACH_WR6202=y CONFIG_RT305X_MACH_XDX_RN502J=y |