diff options
-rw-r--r-- | package/kernel/lantiq/ltq-vdsl-fw/Makefile | 40 | ||||
-rw-r--r-- | package/kernel/lantiq/ltq-vdsl-fw/src/LzmaDecode.c | 584 | ||||
-rw-r--r-- | package/kernel/lantiq/ltq-vdsl-fw/src/LzmaDecode.h | 113 | ||||
-rw-r--r-- | package/kernel/lantiq/ltq-vdsl-fw/src/LzmaTypes.h | 45 | ||||
-rw-r--r-- | package/kernel/lantiq/ltq-vdsl-fw/src/LzmaWrapper.c | 206 | ||||
-rw-r--r-- | package/kernel/lantiq/ltq-vdsl-fw/src/LzmaWrapper.h | 36 | ||||
-rw-r--r-- | package/kernel/lantiq/ltq-vdsl-fw/src/Makefile | 13 | ||||
-rwxr-xr-x | package/kernel/lantiq/ltq-vdsl-fw/src/vdsl_fw_install.sh | 57 | ||||
-rw-r--r-- | package/kernel/lantiq/ltq-vdsl-fw/src/w921v_fw_cutter.c | 165 | ||||
-rw-r--r-- | target/linux/lantiq/xrx200/target.mk | 1 |
10 files changed, 0 insertions, 1260 deletions
diff --git a/package/kernel/lantiq/ltq-vdsl-fw/Makefile b/package/kernel/lantiq/ltq-vdsl-fw/Makefile deleted file mode 100644 index 6404067..0000000 --- a/package/kernel/lantiq/ltq-vdsl-fw/Makefile +++ /dev/null @@ -1,40 +0,0 @@ -# Copyright (C) 2012 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. - -include $(TOPDIR)/rules.mk - -PKG_NAME:=ltq-vdsl-fw -PKG_VERSION:=1 -PKG_RELEASE:=1 - -PKG_MAINTAINER:=John Crispin <blogic@openwrt.org> - -include $(INCLUDE_DIR)/package.mk - -define Package/ltq-vdsl-vr9-fw-installer - TITLE:=Firmware installer - SECTION:=net - CATEGORY:=Network - DEPENDS:=@TARGET_lantiq_xrx200 +kmod-ltq-vdsl-vr9 -endef - -define Build/Prepare - $(INSTALL_DIR) $(PKG_BUILD_DIR) - $(CP) ./src/* $(PKG_BUILD_DIR) -endef - -define Build/Compile - $(TARGET_CONFIGURE_OPTS) \ - CFLAGS="$(TARGET_CFLAGS)" \ - LDFLAGS="$(TARGET_LDFLAGS)" \ - $(MAKE) -C $(PKG_BUILD_DIR) -endef - -define Package/ltq-vdsl-vr9-fw-installer/install - $(INSTALL_DIR) $(1)/sbin - $(CP) $(PKG_BUILD_DIR)/w921v_fw_cutter $(PKG_BUILD_DIR)/vdsl_fw_install.sh $(1)/sbin/ -endef - -$(eval $(call BuildPackage,ltq-vdsl-vr9-fw-installer)) diff --git a/package/kernel/lantiq/ltq-vdsl-fw/src/LzmaDecode.c b/package/kernel/lantiq/ltq-vdsl-fw/src/LzmaDecode.c deleted file mode 100644 index cb83453..0000000 --- a/package/kernel/lantiq/ltq-vdsl-fw/src/LzmaDecode.c +++ /dev/null @@ -1,584 +0,0 @@ -/* - LzmaDecode.c - LZMA Decoder (optimized for Speed version) - - LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01) - http://www.7-zip.org/ - - LZMA SDK is licensed under two licenses: - 1) GNU Lesser General Public License (GNU LGPL) - 2) Common Public License (CPL) - It means that you can select one of these two licenses and - follow rules of that license. - - SPECIAL EXCEPTION: - Igor Pavlov, as the author of this Code, expressly permits you to - statically or dynamically link your Code (or bind by name) to the - interfaces of this file without subjecting your linked Code to the - terms of the CPL or GNU LGPL. Any modifications or additions - to this file, however, are subject to the LGPL or CPL terms. -*/ - -#include "LzmaDecode.h" - -#define kNumTopBits 24 -#define kTopValue ((UInt32)1 << kNumTopBits) - -#define kNumBitModelTotalBits 11 -#define kBitModelTotal (1 << kNumBitModelTotalBits) -#define kNumMoveBits 5 - -#define RC_READ_BYTE (*Buffer++) - -#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \ - { int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }} - -#ifdef _LZMA_IN_CB - -#define RC_TEST { if (Buffer == BufferLim) \ - { SizeT size; int result = InCallback->Read(InCallback, &Buffer, &size); if (result != LZMA_RESULT_OK) return result; \ - BufferLim = Buffer + size; if (size == 0) return LZMA_RESULT_DATA_ERROR; }} - -#define RC_INIT Buffer = BufferLim = 0; RC_INIT2 - -#else - -#define RC_TEST { if (Buffer == BufferLim) return LZMA_RESULT_DATA_ERROR; } - -#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2 - -#endif - -#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; } - -#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound) -#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits; -#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits; - -#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \ - { UpdateBit0(p); mi <<= 1; A0; } else \ - { UpdateBit1(p); mi = (mi + mi) + 1; A1; } - -#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;) - -#define RangeDecoderBitTreeDecode(probs, numLevels, res) \ - { int i = numLevels; res = 1; \ - do { CProb *p = probs + res; RC_GET_BIT(p, res) } while(--i != 0); \ - res -= (1 << numLevels); } - - -#define kNumPosBitsMax 4 -#define kNumPosStatesMax (1 << kNumPosBitsMax) - -#define kLenNumLowBits 3 -#define kLenNumLowSymbols (1 << kLenNumLowBits) -#define kLenNumMidBits 3 -#define kLenNumMidSymbols (1 << kLenNumMidBits) -#define kLenNumHighBits 8 -#define kLenNumHighSymbols (1 << kLenNumHighBits) - -#define LenChoice 0 -#define LenChoice2 (LenChoice + 1) -#define LenLow (LenChoice2 + 1) -#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits)) -#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits)) -#define kNumLenProbs (LenHigh + kLenNumHighSymbols) - - -#define kNumStates 12 -#define kNumLitStates 7 - -#define kStartPosModelIndex 4 -#define kEndPosModelIndex 14 -#define kNumFullDistances (1 << (kEndPosModelIndex >> 1)) - -#define kNumPosSlotBits 6 -#define kNumLenToPosStates 4 - -#define kNumAlignBits 4 -#define kAlignTableSize (1 << kNumAlignBits) - -#define kMatchMinLen 2 - -#define IsMatch 0 -#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax)) -#define IsRepG0 (IsRep + kNumStates) -#define IsRepG1 (IsRepG0 + kNumStates) -#define IsRepG2 (IsRepG1 + kNumStates) -#define IsRep0Long (IsRepG2 + kNumStates) -#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax)) -#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits)) -#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex) -#define LenCoder (Align + kAlignTableSize) -#define RepLenCoder (LenCoder + kNumLenProbs) -#define Literal (RepLenCoder + kNumLenProbs) - -#if Literal != LZMA_BASE_SIZE -StopCompilingDueBUG -#endif - -int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size) -{ - unsigned char prop0; - if (size < LZMA_PROPERTIES_SIZE) - return LZMA_RESULT_DATA_ERROR; - prop0 = propsData[0]; - if (prop0 >= (9 * 5 * 5)) - return LZMA_RESULT_DATA_ERROR; - { - for (propsRes->pb = 0; prop0 >= (9 * 5); propsRes->pb++, prop0 -= (9 * 5)); - for (propsRes->lp = 0; prop0 >= 9; propsRes->lp++, prop0 -= 9); - propsRes->lc = prop0; - /* - unsigned char remainder = (unsigned char)(prop0 / 9); - propsRes->lc = prop0 % 9; - propsRes->pb = remainder / 5; - propsRes->lp = remainder % 5; - */ - } - - #ifdef _LZMA_OUT_READ - { - int i; - propsRes->DictionarySize = 0; - for (i = 0; i < 4; i++) - propsRes->DictionarySize += (UInt32)(propsData[1 + i]) << (i * 8); - if (propsRes->DictionarySize == 0) - propsRes->DictionarySize = 1; - } - #endif - return LZMA_RESULT_OK; -} - -#define kLzmaStreamWasFinishedId (-1) - -int LzmaDecode(CLzmaDecoderState *vs, - #ifdef _LZMA_IN_CB - ILzmaInCallback *InCallback, - #else - const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed, - #endif - unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed) -{ - CProb *p = vs->Probs; - SizeT nowPos = 0; - Byte previousByte = 0; - UInt32 posStateMask = (1 << (vs->Properties.pb)) - 1; - UInt32 literalPosMask = (1 << (vs->Properties.lp)) - 1; - int lc = vs->Properties.lc; - - #ifdef _LZMA_OUT_READ - - UInt32 Range = vs->Range; - UInt32 Code = vs->Code; - #ifdef _LZMA_IN_CB - const Byte *Buffer = vs->Buffer; - const Byte *BufferLim = vs->BufferLim; - #else - const Byte *Buffer = inStream; - const Byte *BufferLim = inStream + inSize; - #endif - int state = vs->State; - UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3]; - int len = vs->RemainLen; - UInt32 globalPos = vs->GlobalPos; - UInt32 distanceLimit = vs->DistanceLimit; - - Byte *dictionary = vs->Dictionary; - UInt32 dictionarySize = vs->Properties.DictionarySize; - UInt32 dictionaryPos = vs->DictionaryPos; - - Byte tempDictionary[4]; - - #ifndef _LZMA_IN_CB - *inSizeProcessed = 0; - #endif - *outSizeProcessed = 0; - if (len == kLzmaStreamWasFinishedId) - return LZMA_RESULT_OK; - - if (dictionarySize == 0) - { - dictionary = tempDictionary; - dictionarySize = 1; - tempDictionary[0] = vs->TempDictionary[0]; - } - - if (len == kLzmaNeedInitId) - { - { - UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp)); - UInt32 i; - for (i = 0; i < numProbs; i++) - p[i] = kBitModelTotal >> 1; - rep0 = rep1 = rep2 = rep3 = 1; - state = 0; - globalPos = 0; - distanceLimit = 0; - dictionaryPos = 0; - dictionary[dictionarySize - 1] = 0; - #ifdef _LZMA_IN_CB - RC_INIT; - #else - RC_INIT(inStream, inSize); - #endif - } - len = 0; - } - while(len != 0 && nowPos < outSize) - { - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos]; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - len--; - } - if (dictionaryPos == 0) - previousByte = dictionary[dictionarySize - 1]; - else - previousByte = dictionary[dictionaryPos - 1]; - - #else /* if !_LZMA_OUT_READ */ - - int state = 0; - UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1; - int len = 0; - const Byte *Buffer; - const Byte *BufferLim; - UInt32 Range; - UInt32 Code; - - #ifndef _LZMA_IN_CB - *inSizeProcessed = 0; - #endif - *outSizeProcessed = 0; - - { - UInt32 i; - UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp)); - for (i = 0; i < numProbs; i++) - p[i] = kBitModelTotal >> 1; - } - - #ifdef _LZMA_IN_CB - RC_INIT; - #else - RC_INIT(inStream, inSize); - #endif - - #endif /* _LZMA_OUT_READ */ - - while(nowPos < outSize) - { - CProb *prob; - UInt32 bound; - int posState = (int)( - (nowPos - #ifdef _LZMA_OUT_READ - + globalPos - #endif - ) - & posStateMask); - - prob = p + IsMatch + (state << kNumPosBitsMax) + posState; - IfBit0(prob) - { - int symbol = 1; - UpdateBit0(prob) - prob = p + Literal + (LZMA_LIT_SIZE * - ((( - (nowPos - #ifdef _LZMA_OUT_READ - + globalPos - #endif - ) - & literalPosMask) << lc) + (previousByte >> (8 - lc)))); - - if (state >= kNumLitStates) - { - int matchByte; - #ifdef _LZMA_OUT_READ - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - matchByte = dictionary[pos]; - #else - matchByte = outStream[nowPos - rep0]; - #endif - do - { - int bit; - CProb *probLit; - matchByte <<= 1; - bit = (matchByte & 0x100); - probLit = prob + 0x100 + bit + symbol; - RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break) - } - while (symbol < 0x100); - } - while (symbol < 0x100) - { - CProb *probLit = prob + symbol; - RC_GET_BIT(probLit, symbol) - } - previousByte = (Byte)symbol; - - outStream[nowPos++] = previousByte; - #ifdef _LZMA_OUT_READ - if (distanceLimit < dictionarySize) - distanceLimit++; - - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #endif - if (state < 4) state = 0; - else if (state < 10) state -= 3; - else state -= 6; - } - else - { - UpdateBit1(prob); - prob = p + IsRep + state; - IfBit0(prob) - { - UpdateBit0(prob); - rep3 = rep2; - rep2 = rep1; - rep1 = rep0; - state = state < kNumLitStates ? 0 : 3; - prob = p + LenCoder; - } - else - { - UpdateBit1(prob); - prob = p + IsRepG0 + state; - IfBit0(prob) - { - UpdateBit0(prob); - prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState; - IfBit0(prob) - { - #ifdef _LZMA_OUT_READ - UInt32 pos; - #endif - UpdateBit0(prob); - - #ifdef _LZMA_OUT_READ - if (distanceLimit == 0) - #else - if (nowPos == 0) - #endif - return LZMA_RESULT_DATA_ERROR; - - state = state < kNumLitStates ? 9 : 11; - #ifdef _LZMA_OUT_READ - pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - previousByte = dictionary[pos]; - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #else - previousByte = outStream[nowPos - rep0]; - #endif - outStream[nowPos++] = previousByte; - #ifdef _LZMA_OUT_READ - if (distanceLimit < dictionarySize) - distanceLimit++; - #endif - - continue; - } - else - { - UpdateBit1(prob); - } - } - else - { - UInt32 distance; - UpdateBit1(prob); - prob = p + IsRepG1 + state; - IfBit0(prob) - { - UpdateBit0(prob); - distance = rep1; - } - else - { - UpdateBit1(prob); - prob = p + IsRepG2 + state; - IfBit0(prob) - { - UpdateBit0(prob); - distance = rep2; - } - else - { - UpdateBit1(prob); - distance = rep3; - rep3 = rep2; - } - rep2 = rep1; - } - rep1 = rep0; - rep0 = distance; - } - state = state < kNumLitStates ? 8 : 11; - prob = p + RepLenCoder; - } - { - int numBits, offset; - CProb *probLen = prob + LenChoice; - IfBit0(probLen) - { - UpdateBit0(probLen); - probLen = prob + LenLow + (posState << kLenNumLowBits); - offset = 0; - numBits = kLenNumLowBits; - } - else - { - UpdateBit1(probLen); - probLen = prob + LenChoice2; - IfBit0(probLen) - { - UpdateBit0(probLen); - probLen = prob + LenMid + (posState << kLenNumMidBits); - offset = kLenNumLowSymbols; - numBits = kLenNumMidBits; - } - else - { - UpdateBit1(probLen); - probLen = prob + LenHigh; - offset = kLenNumLowSymbols + kLenNumMidSymbols; - numBits = kLenNumHighBits; - } - } - RangeDecoderBitTreeDecode(probLen, numBits, len); - len += offset; - } - - if (state < 4) - { - int posSlot; - state += kNumLitStates; - prob = p + PosSlot + - ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << - kNumPosSlotBits); - RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot); - if (posSlot >= kStartPosModelIndex) - { - int numDirectBits = ((posSlot >> 1) - 1); - rep0 = (2 | ((UInt32)posSlot & 1)); - if (posSlot < kEndPosModelIndex) - { - rep0 <<= numDirectBits; - prob = p + SpecPos + rep0 - posSlot - 1; - } - else - { - numDirectBits -= kNumAlignBits; - do - { - RC_NORMALIZE - Range >>= 1; - rep0 <<= 1; - if (Code >= Range) - { - Code -= Range; - rep0 |= 1; - } - } - while (--numDirectBits != 0); - prob = p + Align; - rep0 <<= kNumAlignBits; - numDirectBits = kNumAlignBits; - } - { - int i = 1; - int mi = 1; - do - { - CProb *prob3 = prob + mi; - RC_GET_BIT2(prob3, mi, ; , rep0 |= i); - i <<= 1; - } - while(--numDirectBits != 0); - } - } - else - rep0 = posSlot; - if (++rep0 == (UInt32)(0)) - { - /* it's for stream version */ - len = kLzmaStreamWasFinishedId; - break; - } - } - - len += kMatchMinLen; - #ifdef _LZMA_OUT_READ - if (rep0 > distanceLimit) - #else - if (rep0 > nowPos) - #endif - return LZMA_RESULT_DATA_ERROR; - - #ifdef _LZMA_OUT_READ - if (dictionarySize - distanceLimit > (UInt32)len) - distanceLimit += len; - else - distanceLimit = dictionarySize; - #endif - - do - { - #ifdef _LZMA_OUT_READ - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - previousByte = dictionary[pos]; - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #else - previousByte = outStream[nowPos - rep0]; - #endif - len--; - outStream[nowPos++] = previousByte; - } - while(len != 0 && nowPos < outSize); - } - } - RC_NORMALIZE; - - #ifdef _LZMA_OUT_READ - vs->Range = Range; - vs->Code = Code; - vs->DictionaryPos = dictionaryPos; - vs->GlobalPos = globalPos + (UInt32)nowPos; - vs->DistanceLimit = distanceLimit; - vs->Reps[0] = rep0; - vs->Reps[1] = rep1; - vs->Reps[2] = rep2; - vs->Reps[3] = rep3; - vs->State = state; - vs->RemainLen = len; - vs->TempDictionary[0] = tempDictionary[0]; - #endif - - #ifdef _LZMA_IN_CB - vs->Buffer = Buffer; - vs->BufferLim = BufferLim; - #else - *inSizeProcessed = (SizeT)(Buffer - inStream); - #endif - *outSizeProcessed = nowPos; - return LZMA_RESULT_OK; -} diff --git a/package/kernel/lantiq/ltq-vdsl-fw/src/LzmaDecode.h b/package/kernel/lantiq/ltq-vdsl-fw/src/LzmaDecode.h deleted file mode 100644 index 2870eeb..0000000 --- a/package/kernel/lantiq/ltq-vdsl-fw/src/LzmaDecode.h +++ /dev/null @@ -1,113 +0,0 @@ -/* - LzmaDecode.h - LZMA Decoder interface - - LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01) - http://www.7-zip.org/ - - LZMA SDK is licensed under two licenses: - 1) GNU Lesser General Public License (GNU LGPL) - 2) Common Public License (CPL) - It means that you can select one of these two licenses and - follow rules of that license. - - SPECIAL EXCEPTION: - Igor Pavlov, as the author of this code, expressly permits you to - statically or dynamically link your code (or bind by name) to the - interfaces of this file without subjecting your linked code to the - terms of the CPL or GNU LGPL. Any modifications or additions - to this file, however, are subject to the LGPL or CPL terms. -*/ - -#ifndef __LZMADECODE_H -#define __LZMADECODE_H - -#include "LzmaTypes.h" - -/* #define _LZMA_IN_CB */ -/* Use callback for input data */ - -/* #define _LZMA_OUT_READ */ -/* Use read function for output data */ - -/* #define _LZMA_PROB32 */ -/* It can increase speed on some 32-bit CPUs, - but memory usage will be doubled in that case */ - -/* #define _LZMA_LOC_OPT */ -/* Enable local speed optimizations inside code */ - -#ifdef _LZMA_PROB32 -#define CProb UInt32 -#else -#define CProb UInt16 -#endif - -#define LZMA_RESULT_OK 0 -#define LZMA_RESULT_DATA_ERROR 1 - -#ifdef _LZMA_IN_CB -typedef struct _ILzmaInCallback -{ - int (*Read)(void *object, const unsigned char **buffer, SizeT *bufferSize); -} ILzmaInCallback; -#endif - -#define LZMA_BASE_SIZE 1846 -#define LZMA_LIT_SIZE 768 - -#define LZMA_PROPERTIES_SIZE 5 - -typedef struct _CLzmaProperties -{ - int lc; - int lp; - int pb; - #ifdef _LZMA_OUT_READ - UInt32 DictionarySize; - #endif -}CLzmaProperties; - -int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size); - -#define LzmaGetNumProbs(Properties) (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((Properties)->lc + (Properties)->lp))) - -#define kLzmaNeedInitId (-2) - -typedef struct _CLzmaDecoderState -{ - CLzmaProperties Properties; - CProb *Probs; - - #ifdef _LZMA_IN_CB - const unsigned char *Buffer; - const unsigned char *BufferLim; - #endif - - #ifdef _LZMA_OUT_READ - unsigned char *Dictionary; - UInt32 Range; - UInt32 Code; - UInt32 DictionaryPos; - UInt32 GlobalPos; - UInt32 DistanceLimit; - UInt32 Reps[4]; - int State; - int RemainLen; - unsigned char TempDictionary[4]; - #endif -} CLzmaDecoderState; - -#ifdef _LZMA_OUT_READ -#define LzmaDecoderInit(vs) { (vs)->RemainLen = kLzmaNeedInitId; } -#endif - -int LzmaDecode(CLzmaDecoderState *vs, - #ifdef _LZMA_IN_CB - ILzmaInCallback *inCallback, - #else - const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed, - #endif - unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed); - -#endif diff --git a/package/kernel/lantiq/ltq-vdsl-fw/src/LzmaTypes.h b/package/kernel/lantiq/ltq-vdsl-fw/src/LzmaTypes.h deleted file mode 100644 index 9c27290..0000000 --- a/package/kernel/lantiq/ltq-vdsl-fw/src/LzmaTypes.h +++ /dev/null @@ -1,45 +0,0 @@ -/* -LzmaTypes.h - -Types for LZMA Decoder - -This file written and distributed to public domain by Igor Pavlov. -This file is part of LZMA SDK 4.40 (2006-05-01) -*/ - -#ifndef __LZMATYPES_H -#define __LZMATYPES_H - -#ifndef _7ZIP_BYTE_DEFINED -#define _7ZIP_BYTE_DEFINED -typedef unsigned char Byte; -#endif - -#ifndef _7ZIP_UINT16_DEFINED -#define _7ZIP_UINT16_DEFINED -typedef unsigned short UInt16; -#endif - -#ifndef _7ZIP_UINT32_DEFINED -#define _7ZIP_UINT32_DEFINED -#ifdef _LZMA_UINT32_IS_ULONG -typedef unsigned long UInt32; -#else -typedef unsigned int UInt32; -#endif -#endif - -/* #define _LZMA_NO_SYSTEM_SIZE_T */ -/* You can use it, if you don't want <stddef.h> */ - -#ifndef _7ZIP_SIZET_DEFINED -#define _7ZIP_SIZET_DEFINED -#ifdef _LZMA_NO_SYSTEM_SIZE_T -typedef UInt32 SizeT; -#else -#include <stddef.h> -typedef size_t SizeT; -#endif -#endif - -#endif diff --git a/package/kernel/lantiq/ltq-vdsl-fw/src/LzmaWrapper.c b/package/kernel/lantiq/ltq-vdsl-fw/src/LzmaWrapper.c deleted file mode 100644 index 7dce056..0000000 --- a/package/kernel/lantiq/ltq-vdsl-fw/src/LzmaWrapper.c +++ /dev/null @@ -1,206 +0,0 @@ -/****************************************************************************** -** -** FILE NAME : LzmaWrapper.c -** PROJECT : bootloader -** MODULES : U-boot -** -** DATE : 2 Nov 2006 -** AUTHOR : Lin Mars -** DESCRIPTION : LZMA decoder support for U-boot 1.1.5 -** COPYRIGHT : Copyright (c) 2006 -** Infineon Technologies AG -** Am Campeon 1-12, 85579 Neubiberg, Germany -** -** This program is free software; you can redistribute it and/or modify -** it under the terms of the GNU General Public License as published by -** the Free Software Foundation; either version 2 of the License, or -** (at your option) any later version. -** -** HISTORY -** $Date $Author $Comment -** 2 Nov 2006 Lin Mars init version which derived from LzmaTest.c from -** LZMA v4.43 SDK -** 24 May 2007 Lin Mars Fix issue for multiple lzma_inflate involved -*******************************************************************************/ -#include <stdio.h> -#include <stdlib.h> -#include <string.h> - -#include "LzmaDecode.h" -#include "LzmaWrapper.h" - -#if defined(DEBUG_ENABLE_BOOTSTRAP_PRINTF) || !defined(CFG_BOOTSTRAP_CODE) -static const char *kCantReadMessage = "Can not read from source buffer"; -static const char *kCantAllocateMessage = "Not enough buffer for decompression"; -#endif - -static size_t rpos=0, dpos=0; - -static int MyReadFileAndCheck(unsigned char *src, void *dest, size_t size) -{ - if (size == 0) - return 0; - memcpy(dest, src + rpos, size); - rpos += size; - return 1; -} - -int lzma_inflate(unsigned char *source, int s_len, unsigned char *dest, int *d_len) -{ - /* We use two 32-bit integers to construct 64-bit integer for file size. - You can remove outSizeHigh, if you don't need >= 4GB supporting, - or you can use UInt64 outSize, if your compiler supports 64-bit integers*/ - UInt32 outSize = 0; - UInt32 outSizeHigh = 0; - SizeT outSizeFull; - unsigned char *outStream; - - int waitEOS = 1; - /* waitEOS = 1, if there is no uncompressed size in headers, - so decoder will wait EOS (End of Stream Marker) in compressed stream */ - - SizeT compressedSize; - unsigned char *inStream; - - CLzmaDecoderState state; /* it's about 24-80 bytes structure, if int is 32-bit */ - unsigned char properties[LZMA_PROPERTIES_SIZE]; - - int res; - - rpos=0; dpos=0; - - if (sizeof(UInt32) < 4) - { -#if defined(DEBUG_ENABLE_BOOTSTRAP_PRINTF) || !defined(CFG_BOOTSTRAP_CODE) - printf("LZMA decoder needs correct UInt32\n"); -#endif - return LZMA_RESULT_DATA_ERROR; - } - - { - long length=s_len; - if ((long)(SizeT)length != length) - { -#if defined(DEBUG_ENABLE_BOOTSTRAP_PRINTF) || !defined(CFG_BOOTSTRAP_CODE) - printf("Too big compressed stream\n"); -#endif - return LZMA_RESULT_DATA_ERROR; - } - compressedSize = (SizeT)(length - (LZMA_PROPERTIES_SIZE + 8)); - } - - /* Read LZMA properties for compressed stream */ - - if (!MyReadFileAndCheck(source, properties, sizeof(properties))) - { -#if defined(DEBUG_ENABLE_BOOTSTRAP_PRINTF) || !defined(CFG_BOOTSTRAP_CODE) - printf("%s\n", kCantReadMessage); -#endif - return LZMA_RESULT_DATA_ERROR; - } - - /* Read uncompressed size */ - { - int i; - for (i = 0; i < 8; i++) - { - unsigned char b; - if (!MyReadFileAndCheck(source, &b, 1)) - { -#if defined(DEBUG_ENABLE_BOOTSTRAP_PRINTF) || !defined(CFG_BOOTSTRAP_CODE) - printf("%s\n", kCantReadMessage); -#endif - return LZMA_RESULT_DATA_ERROR; - } - if (b != 0xFF) - waitEOS = 0; - if (i < 4) - outSize += (UInt32)(b) << (i * 8); - else - outSizeHigh += (UInt32)(b) << ((i - 4) * 8); - } - - if (waitEOS) - { -#if defined(DEBUG_ENABLE_BOOTSTRAP_PRINTF) || !defined(CFG_BOOTSTRAP_CODE) - printf("Stream with EOS marker is not supported"); -#endif - return LZMA_RESULT_DATA_ERROR; - } - outSizeFull = (SizeT)outSize; - if (sizeof(SizeT) >= 8) - outSizeFull |= (((SizeT)outSizeHigh << 16) << 16); - else if (outSizeHigh != 0 || (UInt32)(SizeT)outSize != outSize) - { -#if defined(DEBUG_ENABLE_BOOTSTRAP_PRINTF) || !defined(CFG_BOOTSTRAP_CODE) - printf("Too big uncompressed stream"); -#endif - return LZMA_RESULT_DATA_ERROR; - } - } - - /* Decode LZMA properties and allocate memory */ - if (LzmaDecodeProperties(&state.Properties, properties, LZMA_PROPERTIES_SIZE) != LZMA_RESULT_OK) - { -#if defined(DEBUG_ENABLE_BOOTSTRAP_PRINTF) || !defined(CFG_BOOTSTRAP_CODE) - printf("Incorrect stream properties"); -#endif - return LZMA_RESULT_DATA_ERROR; - } - state.Probs = (CProb *)malloc(LzmaGetNumProbs(&state.Properties) * sizeof(CProb)); - - if (outSizeFull == 0) - outStream = 0; - else - { - if (outSizeFull > d_len) - outStream = 0; - else - outStream = dest; - } - - if (compressedSize == 0) - inStream = 0; - else - { - if ((compressedSize+rpos) > s_len ) - inStream = 0; - else - inStream = source + rpos; - } - - if (state.Probs == 0 - || (outStream == 0 && outSizeFull != 0) - || (inStream == 0 && compressedSize != 0) - ) - { - free(state.Probs); -#if defined(DEBUG_ENABLE_BOOTSTRAP_PRINTF) || !defined(CFG_BOOTSTRAP_CODE) - printf("%s\n", kCantAllocateMessage); -#endif - return LZMA_RESULT_DATA_ERROR; - } - - /* Decompress */ - { - SizeT inProcessed; - SizeT outProcessed; - res = LzmaDecode(&state, - inStream, compressedSize, &inProcessed, - outStream, outSizeFull, &outProcessed); - if (res != 0) - { -#if defined(DEBUG_ENABLE_BOOTSTRAP_PRINTF) || !defined(CFG_BOOTSTRAP_CODE) - printf("\nDecoding error = %d\n", res); -#endif - res = 1; - } - else - { - *d_len = outProcessed; - } - } - - free(state.Probs); - return res; -} diff --git a/package/kernel/lantiq/ltq-vdsl-fw/src/LzmaWrapper.h b/package/kernel/lantiq/ltq-vdsl-fw/src/LzmaWrapper.h deleted file mode 100644 index 2f9a3ff..0000000 --- a/package/kernel/lantiq/ltq-vdsl-fw/src/LzmaWrapper.h +++ /dev/null @@ -1,36 +0,0 @@ -/****************************************************************************** -** -** FILE NAME : LzmaWrapper.h -** PROJECT : bootloader -** MODULES : U-boot -** -** DATE : 2 Nov 2006 -** AUTHOR : Lin Mars -** DESCRIPTION : LZMA decoder support for U-boot 1.1.5 -** COPYRIGHT : Copyright (c) 2006 -** Infineon Technologies AG -** Am Campeon 1-12, 85579 Neubiberg, Germany -** -** This program is free software; you can redistribute it and/or modify -** it under the terms of the GNU General Public License as published by -** the Free Software Foundation; either version 2 of the License, or -** (at your option) any later version. -** -** HISTORY -** $Date $Author $Comment -** 2 Nov 2006 Lin Mars init version which derived from LzmaTest.c from -** LZMA v4.43 SDK -*******************************************************************************/ -#ifndef __LZMA_WRAPPER_H__ -#define __LZMA_WRAPPER_H__ - -#ifndef LZMA_RESULT_OK -#define LZMA_RESULT_OK 0 -#endif -#ifndef LZMA_RESULT_DATA_ERROR -#define LZMA_RESULT_DATA_ERROR 1 -#endif - -extern int lzma_inflate(unsigned char *source, int s_len, unsigned char *dest, int *d_len); - -#endif /*__LZMA_WRAPPER_H__*/ diff --git a/package/kernel/lantiq/ltq-vdsl-fw/src/Makefile b/package/kernel/lantiq/ltq-vdsl-fw/src/Makefile deleted file mode 100644 index 2d50aaf..0000000 --- a/package/kernel/lantiq/ltq-vdsl-fw/src/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -PROG=w921v_fw_cutter -OBJS=w921v_fw_cutter.c LzmaDecode.c LzmaWrapper.c - -all: $(PROG) - -$(PROG): $(OBJS) - $(CC) $(CFLAGS) $(LDFLAGS) $^ -o $@ - -clean: - rm *.o $(PROG) - -%.o: %.c - $(CC) $(CFLAGS) -c $^ -o $@ diff --git a/package/kernel/lantiq/ltq-vdsl-fw/src/vdsl_fw_install.sh b/package/kernel/lantiq/ltq-vdsl-fw/src/vdsl_fw_install.sh deleted file mode 100755 index 4572abc..0000000 --- a/package/kernel/lantiq/ltq-vdsl-fw/src/vdsl_fw_install.sh +++ /dev/null @@ -1,57 +0,0 @@ -#!/bin/sh -. /lib/functions.sh - -FW="/tmp/Firmware_Speedport_W921V_1.21.000.bin" -URL="http://hilfe.telekom.de/dlp/eki/downloads/Speedport/Speedport%20W%20921V/Firmware_Speedport_W921V_1.21.000.bin" -FW_TAPI="vr9_tapi_fw.bin" -FW_DSL="vr9_dsl_fw_annex_b.bin" -MD5_FW="0a099d08dbf091c74d685b532cbb1390" -MD5_TAPI="06b6ab3481b8d3eb7e8bf6131f7f6b7f" -MD5_DSL="59dd9dc81195c6854433c691b163f757" - -[ -f /lib/firmware/vdsl.bin ] && exit 0 - -[ -z "$1" ] || URL=$1 - -[ -f "${FW}" ] || { - echo "${FW} does not exist. Try to Download it ? (y/N)" - read -n 1 R - echo "" - [ "$R" = "y" ] || { - echo "Please manually download the firmware from ${URL} and copy the file to ${FW}" - exit 1 - } - echo "Download w921v Firmware" - wget "${URL}" -O "${FW}" - [ $? -eq 0 -a -f "${FW}" ] || exit 1 -} - -F=`md5sum -b ${FW} | cut -d" " -f1` -[ "$F" = "${MD5_FW}" ] || { - echo "Failed to verify Firmware MD5" - exit 1 -} - -cd /tmp -echo "Unpack and decompress w921v Firmware" - -w921v_fw_cutter -[ $? -eq 0 ] || exit 1 - -T=`md5sum -b ${FW_TAPI} | cut -d" " -f1` -D=`md5sum -b ${FW_DSL} | cut -d" " -f1` - -[ "$T" = "${MD5_TAPI}" -a "$D" = "${MD5_DSL}" ] || { - echo "Failed to verify MD5" - exit 1 -} - -MTD=$(find_mtd_index dsl_fw) -if [ "$MTD" -gt 0 -a -e "/dev/mtd$MTD" ]; then - echo "Storing firmware in flash" - tar cvz ${FW_TAPI} ${FW_DSL} | mtd write - "/dev/mtd$MTD" - /etc/init.d/dsl_fs boot -else - cp ${FW_TAPI} ${FW_DSL} /lib/firmware/ - ln -s /lib/firmware/vr9_dsl_fw_annex_b.bin /lib/firmware/vdsl.bin -fi diff --git a/package/kernel/lantiq/ltq-vdsl-fw/src/w921v_fw_cutter.c b/package/kernel/lantiq/ltq-vdsl-fw/src/w921v_fw_cutter.c deleted file mode 100644 index fcd0106..0000000 --- a/package/kernel/lantiq/ltq-vdsl-fw/src/w921v_fw_cutter.c +++ /dev/null @@ -1,165 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) 2012 John Crispin <blogic@openwrt.org> - */ - -#include <sys/types.h> -#include <sys/stat.h> -#include <unistd.h> -#include <stdlib.h> -#include <stdio.h> -#include <string.h> -#include <errno.h> -#include <fcntl.h> - -#include "LzmaWrapper.h" - -#define FW_NAME "/tmp/Firmware_Speedport_W921V_1.21.000.bin" - -#define MAGIC 0x50 -#define MAGIC_SZ 0x3FFC00 -#if __BYTE_ORDER == __LITTLE_ENDIAN -#define MAGIC_PART 0x12345678 -#define MAGIC_LZMA 0x8000005D -#define MAGIC_ANNEX_B 0x3C -#define MAGIC_TAPI 0x5A -#else -#define MAGIC_PART 0x78563412 -#define MAGIC_LZMA 0x5D000080 -#define MAGIC_ANNEX_B 0x3C000000 -#define MAGIC_TAPI 0x5A000000 -#endif - - -const char* part_type(unsigned int id) -{ - switch(id) { - case MAGIC_ANNEX_B: - return "/tmp/vr9_dsl_fw_annex_b.bin"; - case MAGIC_TAPI: - return "/tmp/vr9_tapi_fw.bin"; - } - printf("\tUnknown lzma type 0x%02X\n", id); - return "/tmp/unknown.lzma"; -} - -int main(int argc, char **argv) -{ - struct stat s; - unsigned char *buf_orig; - unsigned int *buf; - int buflen; - int fd; - int i; - int err; - int start = 0, end = 0; - - printf("Arcadyan Firmware cutter v0.1\n"); - printf("-----------------------------\n"); - printf("This tool extracts the different parts of an arcadyan firmware update file\n"); - printf("This tool is for private use only. The Firmware that gets extracted has a license that forbids redistribution\n"); - printf("Please only run this if you understand the risks\n\n"); - printf("I understand the risks ? (y/N)\n"); - - if (getchar() != 'y') - return -1; - - if (stat(FW_NAME, &s) != 0) { - printf("Failed to find %s\n", FW_NAME); - printf("Ask Google or try http://hilfe.telekom.de/dlp/eki/downloads/Speedport/Speedport%20W%20921V/Firmware_Speedport_W921V_1.21.000.bin\n"); - return -1; - } - - buf_orig = malloc(s.st_size); - buf = malloc(s.st_size); - if (!buf_orig || !buf) { - printf("Failed to alloc %d bytes\n", s.st_size); - return -1; - } - - fd = open(FW_NAME, O_RDONLY); - if (fd < 0) { - printf("Unable to open %s\n", FW_NAME); - return -1; - } - - - buflen = read(fd, buf_orig, s.st_size); - close(fd); - if (buflen != s.st_size) { - printf("Loaded %d instead of %d bytes inside %s\n", buflen, s.st_size, FW_NAME); - return -1; - } - - /* <magic> */ - buf_orig++; - buflen -= 1; - for (i = 0; i < MAGIC_SZ; i++) { - if ((i % 16) < 3) - buf_orig[i] = buf_orig[i + 16] ^ MAGIC; - else - buf_orig[i] = buf_orig[i] ^ MAGIC; - } - buflen -= 3; - memmove(&buf_orig[MAGIC_SZ], &buf_orig[MAGIC_SZ + 3], buflen - MAGIC_SZ); - memcpy(buf, buf_orig, s.st_size); - - /* </magic> */ - do { - if (buf[end] == MAGIC_PART) { - end += 2; - printf("Found partition at 0x%08X with size %d\n", - start * sizeof(unsigned int), - (end - start) * sizeof(unsigned int)); - if (buf[start] == MAGIC_LZMA) { - int dest_len = 1024 * 1024; - int len = buf[end - 3]; - unsigned int id = buf[end - 6]; - const char *type = part_type(id); - unsigned char *dest; - - dest = malloc(dest_len); - if (!dest) { - printf("Failed to alloc dest buffer\n"); - return -1; - } - - if (lzma_inflate((unsigned char*)&buf[start], len, dest, &dest_len)) { - printf("Failed to decompress data\n"); - return -1; - } - - fd = creat(type, S_IRUSR | S_IWUSR); - if (fd != -1) { - if (write(fd, dest, dest_len) != dest_len) - printf("\tFailed to write %d bytes\n", dest_len); - else - printf("\tWrote %d bytes to %s\n", dest_len, type); - close(fd); - } else { - printf("\tFailed to open %s\n", type); - } - free(dest); - } else { - printf("\tThis is not lzma\n"); - } - start = end; - } else { - end++; - } - } while(end < buflen / sizeof(unsigned int)); - - return 0; -} diff --git a/target/linux/lantiq/xrx200/target.mk b/target/linux/lantiq/xrx200/target.mk index 059b93e..50abb24 100644 --- a/target/linux/lantiq/xrx200/target.mk +++ b/target/linux/lantiq/xrx200/target.mk @@ -7,7 +7,6 @@ CPU_SUBTYPE:=dsp DEFAULT_PACKAGES+=kmod-leds-gpio \ kmod-gpio-button-hotplug \ - ltq-vdsl-vr9-fw-installer \ kmod-ltq-vdsl-vr9-mei \ kmod-ltq-vdsl-vr9 \ kmod-ltq-atm-vr9 \ |