diff options
10 files changed, 189 insertions, 1 deletions
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index ef172b4..d2e4937 100755 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -184,6 +184,7 @@ get_status_led() { tl-wr841n-v1 | \ tl-wr841n-v7 | \ tl-wr841n-v8 | \ + tl-wa830re-v2 | \ tl-wr842n-v2 | \ tl-wr941nd) status_led="tp-link:green:system" diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds index fe5ff93..ebc8942 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds @@ -286,6 +286,11 @@ tl-wr841n-v8) ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt" ;; +tl-wa830re-v2) + ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0" + ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt" + ;; + tl-wr841n-v9) ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1" ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10" diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network index 646425c..6a43d03 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network @@ -269,6 +269,7 @@ tl-mr3040 |\ tl-mr3040-v2 |\ tl-wa750re |\ tl-wa850re |\ +tl-wa830re-v2 |\ tl-wa801nd-v2 |\ tl-wa901nd |\ tl-wa901nd-v2 |\ diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index bd277ab..88a1c86 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -541,6 +541,9 @@ ar71xx_board_detect() { *TL-WA850RE) name="tl-wa850re" ;; + *"TL-WA830RE v2") + name="tl-wa830re-v2" + ;; *"TL-WA801ND v2") name="tl-wa801nd-v2" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 8af9580..8f3b563 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -253,6 +253,7 @@ platform_check_image() { tl-wr741nd | \ tl-wr741nd-v4 | \ tl-wr841n-v1 | \ + tl-wa830re-v2 | \ tl-wr841n-v7 | \ tl-wr841n-v8 | \ tl-wr841n-v9 | \ diff --git a/target/linux/ar71xx/config-3.10 b/target/linux/ar71xx/config-3.10 index 4e30a44..fbd22b9 100644 --- a/target/linux/ar71xx/config-3.10 +++ b/target/linux/ar71xx/config-3.10 @@ -82,6 +82,7 @@ CONFIG_ATH79_MACH_TL_MR11U=y CONFIG_ATH79_MACH_TL_MR13U=y CONFIG_ATH79_MACH_TL_MR3020=y CONFIG_ATH79_MACH_TL_MR3X20=y +CONFIG_ATH79_MACH_TL_WA830RE_V2=y CONFIG_ATH79_MACH_TL_WA901ND=y CONFIG_ATH79_MACH_TL_WA901ND_V2=y CONFIG_ATH79_MACH_TL_WAX50RE=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa830re-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa830re-v2.c new file mode 100644 index 0000000..1c74fed --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa830re-v2.c @@ -0,0 +1,132 @@ +/* + * TP-LINK TL-WA830RE v2 board support + * + * Copyright (C) 2014 Fredrik Jonson <fredrik@famjonson.se> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/gpio.h> +#include <linux/platform_device.h> + +#include <asm/mach-ath79/ath79.h> +#include <asm/mach-ath79/ar71xx_regs.h> + +#include "common.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define TL_WA830REV2_GPIO_LED_WLAN 13 +#define TL_WA830REV2_GPIO_LED_QSS 15 +#define TL_WA830REV2_GPIO_LED_LAN 18 +#define TL_WA830REV2_GPIO_LED_SYSTEM 14 + +#define TL_WA830REV2_GPIO_BTN_RESET 17 +#define TL_WA830REV2_GPIO_SW_RFKILL 16 /* WPS for MR3420 v2 */ + +#define TL_WA830REV2_GPIO_USB_POWER 4 + +#define TL_WA830REV2_KEYS_POLL_INTERVAL 20 /* msecs */ +#define TL_WA830REV2_KEYS_DEBOUNCE_INTERVAL (3 * TL_WA830REV2_KEYS_POLL_INTERVAL) + +static const char *tl_wa830re_v2_part_probes[] = { + "tp-link", + NULL, +}; + +static struct flash_platform_data tl_wa830re_v2_flash_data = { + .part_probes = tl_wa830re_v2_part_probes, +}; + +static struct gpio_led tl_wa830re_v2_leds_gpio[] __initdata = { + { + .name = "tp-link:green:qss", + .gpio = TL_WA830REV2_GPIO_LED_QSS, + .active_low = 1, + }, { + .name = "tp-link:green:system", + .gpio = TL_WA830REV2_GPIO_LED_SYSTEM, + .active_low = 1, + }, { + .name = "tp-link:green:lan", + .gpio = TL_WA830REV2_GPIO_LED_LAN, + .active_low = 1, + }, { + .name = "tp-link:green:wlan", + .gpio = TL_WA830REV2_GPIO_LED_WLAN, + .active_low = 1, + }, +}; + +static struct gpio_keys_button tl_wa830re_v2_gpio_keys[] __initdata = { + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = TL_WA830REV2_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WA830REV2_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "RFKILL switch", + .type = EV_SW, + .code = KEY_RFKILL, + .debounce_interval = TL_WA830REV2_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WA830REV2_GPIO_SW_RFKILL, + .active_low = 0, + } +}; + +static void __init tl_ap123_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + /* Disable JTAG, enabling GPIOs 0-3 */ + /* Configure OBS4 line, for GPIO 4*/ + ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE, + AR934X_GPIO_FUNC_CLK_OBS4_EN); + + /* config gpio4 as normal gpio function */ + ath79_gpio_output_select(TL_WA830REV2_GPIO_USB_POWER, + AR934X_GPIO_OUT_GPIO); + + ath79_register_m25p80(&tl_wa830re_v2_flash_data); + + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP); + + ath79_register_mdio(1, 0x0); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); + + /* GMAC0 is connected to the PHY0 of the internal switch */ + ath79_switch_data.phy4_mii_en = 1; + ath79_switch_data.phy_poll_mask = BIT(0); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.phy_mask = BIT(0); + ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; + ath79_register_eth(0); + + ath79_register_wmac(ee, mac); +} + +static void __init tl_wa830re_v2_setup(void) +{ + tl_ap123_setup(); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa830re_v2_leds_gpio) - 1, + tl_wa830re_v2_leds_gpio); + + ath79_register_gpio_keys_polled(1, TL_WA830REV2_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tl_wa830re_v2_gpio_keys), + tl_wa830re_v2_gpio_keys); +} + +MIPS_MACHINE(ATH79_MACH_TL_WA830RE_V2, "TL-WA830RE-v2", "TP-LINK TL-WA830RE v2", + tl_wa830re_v2_setup); diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile index 6bc1105..4b5f502 100644 --- a/target/linux/ar71xx/image/Makefile +++ b/target/linux/ar71xx/image/Makefile @@ -1149,6 +1149,7 @@ $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR741NV4,tl-wr741nd-v4,TL-WR741 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR743NV2,tl-wr743nd-v2,TL-WR741ND-v4,ttyATH0,115200,0x07430002,1,4Mlzma)) $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWA750,tl-wa750re-v1,TL-WA750RE,ttyS0,115200,0x07500001,1,4Mlzma)) $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR841NV8,tl-wr841n-v8,TL-WR841N-v8,ttyS0,115200,0x08410008,1,4Mlzma)) +$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWA830RV2,tl-wa830re-v2,TL-WA830RE-v2,ttyS0,115200,0x08300002,1,4Mlzma)) $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR841NV9,tl-wr841n-v9,TL-WR841N-v9,ttyS0,115200,0x08410009,1,4Mlzma)) $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR842V2,tl-wr842n-v2,TL-WR842N-v2,ttyS0,115200,0x8420002,1,8Mlzma)) $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWA801NV2,tl-wa801nd-v2,TL-WA801ND-v2,ttyS0,115200,0x08010002,1,4Mlzma)) @@ -1214,7 +1215,7 @@ $(eval $(call MultiProfile,TLMR3220,TLMR3220V1 TLMR3220V2)) $(eval $(call MultiProfile,TLMR3420,TLMR3420V1 TLMR3420V2)) $(eval $(call MultiProfile,TLWA730RE,TLWA730REV1)) $(eval $(call MultiProfile,TLWA801,TLWA801NV1 TLWA801NV2)) -$(eval $(call MultiProfile,TLWA830,TLWA830RV1)) +$(eval $(call MultiProfile,TLWA830,TLWA830RV1 TLWA830RV2)) $(eval $(call MultiProfile,TLWA901,TLWA901NV1 TLWA901NV2 TLWA901NV3)) $(eval $(call MultiProfile,TLWA7510,TLWA7510NV1)) $(eval $(call MultiProfile,TLWR720,TLWR720NV3)) diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default index 39d3e60..8923015 100644 --- a/target/linux/ar71xx/mikrotik/config-default +++ b/target/linux/ar71xx/mikrotik/config-default @@ -50,6 +50,7 @@ CONFIG_ATH79_MACH_RBSXTLITE=y # CONFIG_ATH79_MACH_TL_MR13U is not set # CONFIG_ATH79_MACH_TL_MR3020 is not set # CONFIG_ATH79_MACH_TL_MR3X20 is not set +# CONFIG_ATH79_MACH_TL_WA830RE_V2 is not set # CONFIG_ATH79_MACH_TL_WA901ND is not set # CONFIG_ATH79_MACH_TL_WA901ND_V2 is not set # CONFIG_ATH79_MACH_TL_WDR3500 is not set diff --git a/target/linux/ar71xx/patches-3.10/714-MIPS-ath79-add-TL-WA830REv2-support.patch b/target/linux/ar71xx/patches-3.10/714-MIPS-ath79-add-TL-WA830REv2-support.patch new file mode 100644 index 0000000..fcb619c --- /dev/null +++ b/target/linux/ar71xx/patches-3.10/714-MIPS-ath79-add-TL-WA830REv2-support.patch @@ -0,0 +1,42 @@ +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -647,7 +647,17 @@ config ATH79_MACH_TL_WAX50RE + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC +- ++ ++config ATH79_MACH_TL_WA830RE_V2 ++ bool "TP-LINK TL-WA830RE v2 support" ++ select SOC_AR934X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ + config ATH79_MACH_TL_WA901ND + bool "TP-LINK TL-WA901ND/TL-WA7510N support" + select SOC_AR724X +--- a/arch/mips/ath79/Makefile ++++ b/arch/mips/ath79/Makefile +@@ -95,6 +95,7 @@ obj-$(CONFIG_ATH79_MACH_TL_MR13U) += mac + obj-$(CONFIG_ATH79_MACH_TL_MR3020) += mach-tl-mr3020.o + obj-$(CONFIG_ATH79_MACH_TL_MR3X20) += mach-tl-mr3x20.o + obj-$(CONFIG_ATH79_MACH_TL_WAX50RE) += mach-tl-wax50re.o ++obj-$(CONFIG_ATH79_MACH_TL_WA830RE_V2) += mach-tl-wa830re-v2.o + obj-$(CONFIG_ATH79_MACH_TL_WA901ND) += mach-tl-wa901nd.o + obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2) += mach-tl-wa901nd-v2.o + obj-$(CONFIG_ATH79_MACH_TL_WDR3500) += mach-tl-wdr3500.o +--- a/arch/mips/ath79/machtypes.h ++++ b/arch/mips/ath79/machtypes.h +@@ -112,6 +112,7 @@ enum ath79_mach_type { + ATH79_MACH_TL_WA7510N_V1, /* TP-LINK TL-WA7510N v1*/ + ATH79_MACH_TL_WA850RE, /* TP-LINK TL-WA850RE */ + ATH79_MACH_TL_WA801ND_V2, /* TP-LINK TL-WA801ND v2 */ ++ ATH79_MACH_TL_WA830RE_V2, /* TP-LINK TL-WA830RE v2 */ + ATH79_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */ + ATH79_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */ + ATH79_MACH_TL_WA901ND_V3, /* TP-LINK TL-WA901ND v3 + |