summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/diag.sh3
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/uci-defaults/leds8
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/uci-defaults/network1
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/ar71xx.sh3
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ar71xx/config-2.6.391
-rw-r--r--target/linux/ar71xx/config-3.21
-rw-r--r--target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Kconfig9
-rw-r--r--target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Makefile1
-rw-r--r--target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-615-e4.c183
-rw-r--r--target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/machtype.h1
-rw-r--r--target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-615-e4.c179
-rw-r--r--target/linux/ar71xx/generic/profiles/d-link.mk12
-rw-r--r--target/linux/ar71xx/image/Makefile6
-rw-r--r--target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch26
15 files changed, 428 insertions, 7 deletions
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index f30ad05..a3d5075 100755
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -57,6 +57,9 @@ get_status_led() {
dir-615-c1)
status_led="dir-615c1:green:status"
;;
+ dir-615-e4)
+ status_led="dir-615-e4:green:power"
+ ;;
dir-825-b1)
status_led="dir825b1:orange:power"
;;
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/leds b/target/linux/ar71xx/base-files/etc/uci-defaults/leds
index d961393..c33510a 100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/leds
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/leds
@@ -118,6 +118,14 @@ rb750)
set_led_switch "port5" "port5" "rb750:green:port5" "switch0" "0x02"
;;
+dir-615-e4)
+ set_led_netdev "wan" "WAN" "dir-615-e4:green:wan" "eth1"
+ set_led_switch "lan1" "LAN1" "dir-615-e4:green:lan1" "switch0" "0x02"
+ set_led_switch "lan2" "LAN2" "dir-615-e4:green:lan2" "switch0" "0x04"
+ set_led_switch "lan3" "LAN3" "dir-615-e4:green:lan3" "switch0" "0x08"
+ set_led_switch "lan4" "LAN4" "dir-615-e4:green:lan4" "switch0" "0x10"
+ ;;
+
dir-825-b1)
set_led_usbdev "usb" "USB" "dir825b1:blue:usb" "1-1"
;;
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/network b/target/linux/ar71xx/base-files/etc/uci-defaults/network
index ca99898..613b2a0 100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/network
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/network
@@ -137,6 +137,7 @@ ap96 |\
airrouter |\
dir-600-a1 |\
dir-615-c1 |\
+dir-615-e4 |\
ja76pf |\
rb-750 |\
tew-632brp |\
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 9f11722..82b53f1 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -166,6 +166,9 @@ ar71xx_board_detect() {
*"DIR-600 rev. A1")
name="dir-600-a1"
;;
+ *"DIR-615 rev. E4")
+ name="dir-615-e4"
+ ;;
*"DIR-825 rev. B1")
name="dir-825-b1"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 49df3c3..3adfcd5 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -97,6 +97,7 @@ platform_check_image() {
ap83 | \
dir-600-a1 | \
dir-615-c1 | \
+ dir-615-e4 | \
dir-825-b1 | \
mzk-w04nu | \
mzk-w300nh | \
diff --git a/target/linux/ar71xx/config-2.6.39 b/target/linux/ar71xx/config-2.6.39
index 4f51b1a..b8a91b5 100644
--- a/target/linux/ar71xx/config-2.6.39
+++ b/target/linux/ar71xx/config-2.6.39
@@ -25,6 +25,7 @@ CONFIG_AR71XX_MACH_AW_NR580=y
CONFIG_AR71XX_MACH_DB120=y
CONFIG_AR71XX_MACH_DIR_600_A1=y
CONFIG_AR71XX_MACH_DIR_615_C1=y
+CONFIG_AR71XX_MACH_DIR_615_E4=y
CONFIG_AR71XX_MACH_DIR_825_B1=y
CONFIG_AR71XX_MACH_EAP7660D=y
CONFIG_AR71XX_MACH_HORNET_UB=y
diff --git a/target/linux/ar71xx/config-3.2 b/target/linux/ar71xx/config-3.2
index 50fe18f..c3bcc76 100644
--- a/target/linux/ar71xx/config-3.2
+++ b/target/linux/ar71xx/config-3.2
@@ -34,6 +34,7 @@ CONFIG_ATH79_MACH_AW_NR580=y
CONFIG_ATH79_MACH_DB120=y
CONFIG_ATH79_MACH_DIR_600_A1=y
CONFIG_ATH79_MACH_DIR_615_C1=y
+CONFIG_ATH79_MACH_DIR_615_E4=y
CONFIG_ATH79_MACH_DIR_825_B1=y
CONFIG_ATH79_MACH_EAP7660D=y
CONFIG_ATH79_MACH_HORNET_UB=y
diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Kconfig b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Kconfig
index 60db3ef..14982b1 100644
--- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Kconfig
+++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Kconfig
@@ -104,6 +104,15 @@ config AR71XX_MACH_DIR_615_C1
select AR71XX_DEV_LEDS_GPIO
select AR71XX_NVRAM
+config AR71XX_MACH_DIR_615_E4
+ bool "D-Link DIR-615 rev. E4 support"
+ select SOC_AR724X
+ select AR71XX_DEV_AP91_PCI if PCI
+ select AR71XX_DEV_M25P80
+ select AR71XX_DEV_GPIO_BUTTONS
+ select AR71XX_DEV_LEDS_GPIO
+ select AR71XX_NVRAM
+
config AR71XX_MACH_DIR_825_B1
bool "D-Link DIR-825 rev. B1 board support"
select SOC_AR71XX
diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Makefile b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Makefile
index 22e32e5..546ff34 100644
--- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Makefile
+++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Makefile
@@ -40,6 +40,7 @@ obj-$(CONFIG_AR71XX_MACH_AW_NR580) += mach-aw-nr580.o
obj-$(CONFIG_AR71XX_MACH_DB120) += mach-db120.o
obj-$(CONFIG_AR71XX_MACH_DIR_600_A1) += mach-dir-600-a1.o
obj-$(CONFIG_AR71XX_MACH_DIR_615_C1) += mach-dir-615-c1.o
+obj-$(CONFIG_AR71XX_MACH_DIR_615_E4) += mach-dir-615-e4.o
obj-$(CONFIG_AR71XX_MACH_DIR_825_B1) += mach-dir-825-b1.o
obj-$(CONFIG_AR71XX_MACH_EAP7660D) += mach-eap7660d.o
obj-$(CONFIG_AR71XX_MACH_JA76PF) += mach-ja76pf.o
diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-615-e4.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-615-e4.c
new file mode 100644
index 0000000..943929a
--- /dev/null
+++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-615-e4.c
@@ -0,0 +1,183 @@
+/*
+ * D-Link DIR-615 rev. E4 board support
+ *
+ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2012 Vadim Girlin <vadimgirlin@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-ap91-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "nvram.h"
+
+#define DIR_615_E4_GPIO_LED_WPS 0
+#define DIR_615_E4_GPIO_LED_POWER_AMBER 1
+#define DIR_615_E4_GPIO_LED_POWER_GREEN 6
+#define DIR_615_E4_GPIO_LED_WAN_AMBER 7
+#define DIR_615_E4_GPIO_LED_WAN_GREEN 17
+#define DIR_615_E4_GPIO_LED_LAN1_GREEN 13
+#define DIR_615_E4_GPIO_LED_LAN2_GREEN 14
+#define DIR_615_E4_GPIO_LED_LAN3_GREEN 15
+#define DIR_615_E4_GPIO_LED_LAN4_GREEN 16
+
+#define DIR_615_E4_GPIO_BTN_RESET 8
+#define DIR_615_E4_GPIO_BTN_WPS 12
+
+#define DIR_615_E4_KEYS_POLL_INTERVAL 20
+#define DIR_615_E4_KEYS_DEBOUNCE_INTERVAL (3 * DIR_615_E4_KEYS_POLL_INTERVAL)
+
+#define DIR_615_E4_NVRAM_ADDR 0x1f030000
+#define DIR_615_E4_NVRAM_SIZE 0x10000
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition dir_615_e4_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x030000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "nvram",
+ .offset = 0x030000,
+ .size = 0x010000,
+ }, {
+ .name = "kernel",
+ .offset = 0x040000,
+ .size = 0x0e0000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x120000,
+ .size = 0x2c0000,
+ }, {
+ .name = "mac",
+ .offset = 0x3e0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "art",
+ .offset = 0x3f0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x040000,
+ .size = 0x3a0000,
+ }
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct flash_platform_data dir_615_e4_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+ .parts = dir_615_e4_partitions,
+ .nr_parts = ARRAY_SIZE(dir_615_e4_partitions),
+#endif
+};
+
+
+static struct gpio_led dir_615_e4_leds_gpio[] __initdata = {
+ {
+ .name = "dir-615-e4:green:power",
+ .gpio = DIR_615_E4_GPIO_LED_POWER_GREEN,
+ }, {
+ .name = "dir-615-e4:amber:power",
+ .gpio = DIR_615_E4_GPIO_LED_POWER_AMBER,
+ }, {
+ .name = "dir-615-e4:green:wan",
+ .gpio = DIR_615_E4_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "dir-615-e4:amber:wan",
+ .gpio = DIR_615_E4_GPIO_LED_WAN_AMBER,
+ }, {
+ .name = "dir-615-e4:green:lan1",
+ .gpio = DIR_615_E4_GPIO_LED_LAN1_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "dir-615-e4:green:lan2",
+ .gpio = DIR_615_E4_GPIO_LED_LAN2_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "dir-615-e4:green:lan3",
+ .gpio = DIR_615_E4_GPIO_LED_LAN3_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "dir-615-e4:green:lan4",
+ .gpio = DIR_615_E4_GPIO_LED_LAN4_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "dir-615-e4:blue:wps",
+ .gpio = DIR_615_E4_GPIO_LED_WPS,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button dir_615_e4_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = DIR_615_E4_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DIR_615_E4_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = DIR_615_E4_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DIR_615_E4_GPIO_BTN_WPS,
+ .active_low = 1,
+ }
+};
+
+static void __init dir_615_e4_setup(void)
+{
+ const char *nvram = (char *) KSEG1ADDR(DIR_615_E4_NVRAM_ADDR);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+ u8 mac_buff[6];
+ u8 *mac = NULL;
+
+ if (nvram_parse_mac_addr(nvram, DIR_615_E4_NVRAM_SIZE,
+ "lan_mac=", mac_buff) == 0) {
+ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac_buff, 0);
+ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac_buff, 1);
+ mac = mac_buff;
+ }
+
+ ar71xx_add_device_m25p80(&dir_615_e4_flash_data);
+
+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir_615_e4_leds_gpio),
+ dir_615_e4_leds_gpio);
+
+ ar71xx_register_gpio_keys_polled(-1, DIR_615_E4_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(dir_615_e4_gpio_keys),
+ dir_615_e4_gpio_keys);
+
+ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
+ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1);
+
+ ar71xx_add_device_mdio(0, 0x0);
+
+ /* LAN ports */
+ ar71xx_add_device_eth(1);
+
+ /* WAN port */
+ ar71xx_add_device_eth(0);
+
+ ap91_pci_setup_wmac_led_pin(1);
+ ap91_pci_init(ee, mac);
+}
+
+MIPS_MACHINE(AR71XX_MACH_DIR_615_E4, "DIR-615-E4", "D-Link DIR-615 rev. E4",
+ dir_615_e4_setup);
diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/machtype.h b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/machtype.h
index 452055d..82fc944 100644
--- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/machtype.h
+++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/machtype.h
@@ -29,6 +29,7 @@ enum ar71xx_mach_type {
AR71XX_MACH_DB120, /* Atheros DB120 (AR934x based) */
AR71XX_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */
AR71XX_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */
+ AR71XX_MACH_DIR_615_E4, /* D-Link DIR-615 rev. E4 */
AR71XX_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */
AR71XX_MACH_EAP7660D, /* Senao EAP7660D */
AR71XX_MACH_JA76PF, /* jjPlus JA76PF */
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-615-e4.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-615-e4.c
new file mode 100644
index 0000000..cce5dce
--- /dev/null
+++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-615-e4.c
@@ -0,0 +1,179 @@
+/*
+ * D-Link DIR-615 rev. E4 board support
+ *
+ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2012 Vadim Girlin <vadimgirlin@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+#include "nvram.h"
+
+#define DIR_615_E4_GPIO_LED_WPS 0
+#define DIR_615_E4_GPIO_LED_POWER_AMBER 1
+#define DIR_615_E4_GPIO_LED_POWER_GREEN 6
+#define DIR_615_E4_GPIO_LED_WAN_AMBER 7
+#define DIR_615_E4_GPIO_LED_WAN_GREEN 17
+#define DIR_615_E4_GPIO_LED_LAN1_GREEN 13
+#define DIR_615_E4_GPIO_LED_LAN2_GREEN 14
+#define DIR_615_E4_GPIO_LED_LAN3_GREEN 15
+#define DIR_615_E4_GPIO_LED_LAN4_GREEN 16
+
+#define DIR_615_E4_GPIO_BTN_RESET 8
+#define DIR_615_E4_GPIO_BTN_WPS 12
+
+#define DIR_615_E4_KEYS_POLL_INTERVAL 20
+#define DIR_615_E4_KEYS_DEBOUNCE_INTERVAL (3 * DIR_615_E4_KEYS_POLL_INTERVAL)
+
+#define DIR_615_E4_NVRAM_ADDR 0x1f030000
+#define DIR_615_E4_NVRAM_SIZE 0x10000
+
+static struct mtd_partition dir_615_e4_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x030000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "nvram",
+ .offset = 0x030000,
+ .size = 0x010000,
+ }, {
+ .name = "kernel",
+ .offset = 0x040000,
+ .size = 0x0e0000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x120000,
+ .size = 0x2c0000,
+ }, {
+ .name = "mac",
+ .offset = 0x3e0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "art",
+ .offset = 0x3f0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x040000,
+ .size = 0x3a0000,
+ }
+};
+
+static struct flash_platform_data dir_615_e4_flash_data = {
+ .parts = dir_615_e4_partitions,
+ .nr_parts = ARRAY_SIZE(dir_615_e4_partitions),
+};
+
+
+static struct gpio_led dir_615_e4_leds_gpio[] __initdata = {
+ {
+ .name = "dir-615-e4:green:power",
+ .gpio = DIR_615_E4_GPIO_LED_POWER_GREEN,
+ }, {
+ .name = "dir-615-e4:amber:power",
+ .gpio = DIR_615_E4_GPIO_LED_POWER_AMBER,
+ }, {
+ .name = "dir-615-e4:green:wan",
+ .gpio = DIR_615_E4_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "dir-615-e4:amber:wan",
+ .gpio = DIR_615_E4_GPIO_LED_WAN_AMBER,
+ }, {
+ .name = "dir-615-e4:green:lan1",
+ .gpio = DIR_615_E4_GPIO_LED_LAN1_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "dir-615-e4:green:lan2",
+ .gpio = DIR_615_E4_GPIO_LED_LAN2_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "dir-615-e4:green:lan3",
+ .gpio = DIR_615_E4_GPIO_LED_LAN3_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "dir-615-e4:green:lan4",
+ .gpio = DIR_615_E4_GPIO_LED_LAN4_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "dir-615-e4:blue:wps",
+ .gpio = DIR_615_E4_GPIO_LED_WPS,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button dir_615_e4_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = DIR_615_E4_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DIR_615_E4_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = DIR_615_E4_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DIR_615_E4_GPIO_BTN_WPS,
+ .active_low = 1,
+ }
+};
+
+static void __init dir_615_e4_setup(void)
+{
+ const char *nvram = (char *) KSEG1ADDR(DIR_615_E4_NVRAM_ADDR);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+ u8 mac_buff[6];
+ u8 *mac = NULL;
+
+ if (ath79_nvram_parse_mac_addr(nvram, DIR_615_E4_NVRAM_SIZE,
+ "lan_mac=", mac_buff) == 0) {
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac_buff, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac_buff, 1);
+ mac = mac_buff;
+ }
+
+ ath79_register_m25p80(&dir_615_e4_flash_data);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_615_e4_leds_gpio),
+ dir_615_e4_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, DIR_615_E4_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(dir_615_e4_gpio_keys),
+ dir_615_e4_gpio_keys);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+
+ ath79_register_mdio(0, 0x0);
+
+ /* LAN ports */
+ ath79_register_eth(1);
+
+ /* WAN port */
+ ath79_register_eth(0);
+
+ ap9x_pci_setup_wmac_led_pin(0, 1);
+ ap91_pci_init(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_DIR_615_E4, "DIR-615-E4", "D-Link DIR-615 rev. E4",
+ dir_615_e4_setup);
diff --git a/target/linux/ar71xx/generic/profiles/d-link.mk b/target/linux/ar71xx/generic/profiles/d-link.mk
index ec79dde..3068c4f 100644
--- a/target/linux/ar71xx/generic/profiles/d-link.mk
+++ b/target/linux/ar71xx/generic/profiles/d-link.mk
@@ -29,6 +29,18 @@ endef
$(eval $(call Profile,DIR615C1))
+define Profile/DIR615E4
+ NAME:=D-Link DIR-615 rev. E4
+ PACKAGES:=
+endef
+
+define Profile/DIR615E4/Description
+ Package set optimized for the D-Link DIR-615 rev. E4.
+endef
+
+$(eval $(call Profile,DIR615E4))
+
+
define Profile/DIR825B1
NAME:=D-Link DIR-825 rev. B1
PACKAGES:=kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev
diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index bd5e945..19e26ad 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -698,6 +698,11 @@ define Image/Build/Profile/DIR600A1
$(call Image/Build/Template/$(fs_64k)/$(1),Cameo7240,dir-600-a1,$(dir600a1_cmdline),"AP91-AR7240-RT-090223-00")
endef
+dir615e4_cmdline=board=DIR-615-E4 console=ttyS0,115200
+define Image/Build/Profile/DIR615E4
+ $(call Image/Build/Template/$(fs_64k)/$(1),Cameo7240,dir-615-e4,$(dir615e4_cmdline),"AP99-AR7240-RT-091105-05")
+endef
+
eap7660d_cmdline=board=EAP7660D console=ttyS0,115200
define Image/Build/Profile/EAP7660D
$(call Image/Build/Template/$(fs_128k)/$(1),PB4X,eap7660d,$(eap7660d_cmdline))
@@ -995,6 +1000,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/DB120,$(1))
$(call Image/Build/Profile/DIR600A1,$(1))
$(call Image/Build/Profile/DIR615C1,$(1))
+ $(call Image/Build/Profile/DIR615E4,$(1))
$(call Image/Build/Profile/DIR825B1,$(1))
$(call Image/Build/Profile/EAP7660D,$(1))
$(call Image/Build/Profile/FR54RTR,$(1))
diff --git a/target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch
index d5204cb..e6542a1 100644
--- a/target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch
+++ b/target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch
@@ -1,6 +1,6 @@
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
-@@ -16,17 +16,80 @@
+@@ -16,17 +16,81 @@
enum ath79_mach_type {
ATH79_MACH_GENERIC = 0,
@@ -18,6 +18,7 @@
ATH79_MACH_PB44, /* Atheros PB44 reference board */
+ ATH79_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */
+ ATH79_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */
++ ATH79_MACH_DIR_615_E4, /* D-Link DIR-615 rev. E4 */
+ ATH79_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */
+ ATH79_MACH_EAP7660D, /* Senao EAP7660D */
+ ATH79_MACH_JA76PF, /* jjPlus JA76PF */
@@ -187,7 +188,7 @@
config ATH79_MACH_PB44
bool "Atheros PB44 reference board"
select SOC_AR71XX
-@@ -54,6 +137,369 @@ config ATH79_MACH_PB44
+@@ -54,6 +137,379 @@ config ATH79_MACH_PB44
Say 'Y' here if you want your kernel to support the
Atheros PB44 reference board.
@@ -296,6 +297,16 @@
+ select ATH79_DEV_WMAC
+ select ATH79_NVRAM
+
++config ATH79_MACH_DIR_615_E4
++ bool "D-Link DIR-615 rev. E4 support"
++ select SOC_AR724X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_NVRAM
++
+config ATH79_MACH_DIR_825_B1
+ bool "D-Link DIR-825 rev. B1 board support"
+ select SOC_AR71XX
@@ -557,7 +568,7 @@
config ATH79_MACH_UBNT_XM
bool "Ubiquiti Networks XM (rev 1.0) board"
select SOC_AR724X
-@@ -67,6 +513,24 @@ config ATH79_MACH_UBNT_XM
+@@ -67,6 +523,24 @@ config ATH79_MACH_UBNT_XM
Say 'Y' here if you want your kernel to support the
Ubiquiti Networks XM (rev 1.0) board.
@@ -582,7 +593,7 @@
endmenu
config SOC_AR71XX
-@@ -96,10 +560,6 @@ config SOC_AR934X
+@@ -96,10 +570,6 @@ config SOC_AR934X
select PCI_AR724X if PCI
def_bool n
@@ -593,7 +604,7 @@
config ATH79_DEV_AP9X_PCI
select ATH79_PCI_ATH9K_FIXUP
def_bool n
-@@ -110,7 +570,14 @@ config ATH79_DEV_DSA
+@@ -110,7 +580,14 @@ config ATH79_DEV_DSA
config ATH79_DEV_ETH
def_bool n
@@ -609,7 +620,7 @@
def_bool n
config ATH79_DEV_GPIO_BUTTONS
-@@ -135,4 +602,7 @@ config ATH79_NVRAM
+@@ -135,4 +612,7 @@ config ATH79_NVRAM
config ATH79_PCI_ATH9K_FIXUP
def_bool n
@@ -619,7 +630,7 @@
endif
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
-@@ -36,8 +36,56 @@ obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += p
+@@ -36,8 +36,57 @@ obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += p
#
# Machines
#
@@ -635,6 +646,7 @@
obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
+obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o
+obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o
++obj-$(CONFIG_ATH79_MACH_DIR_615_E4) += mach-dir-615-e4.o
+obj-$(CONFIG_ATH79_MACH_DIR_825_B1) += mach-dir-825-b1.o
+obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o
+obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o