summaryrefslogtreecommitdiff
path: root/docs/network.tex
diff options
context:
space:
mode:
Diffstat (limited to 'docs/network.tex')
-rw-r--r--docs/network.tex86
1 files changed, 86 insertions, 0 deletions
diff --git a/docs/network.tex b/docs/network.tex
new file mode 100644
index 0000000..1ba1bd9
--- /dev/null
+++ b/docs/network.tex
@@ -0,0 +1,86 @@
+The network configuration in Kamikaze is stored in \texttt{/etc/config/network}
+and is divided into interface configurations.
+Each interface configuration either refers directly to an ethernet/wifi
+interface (\texttt{eth0}, \texttt{wl0}, ..) or to a bridge containing multiple interfaces.
+It looks like this:
+
+\begin{Verbatim}
+config interface "lan"
+ option ifname "eth0"
+ option proto "static"
+ option ipaddr "192.168.1.1"
+ option netmask "255.255.255.0"
+ option gateway "192.168.1.254"
+ option dns "192.168.1.254"
+\end{Verbatim}
+
+\texttt{ifname} specifies the Linux interface name.
+If you want to use bridging on one or more interfaces, set \texttt{ifname} to a list
+of interfaces and add:
+\begin{Verbatim}
+ option type "bridge"
+\end{Verbatim}
+
+It is possible to use VLAN tagging on an interface simply by adding the VLAN IDs
+to it, e.g. \texttt{eth0.1}. These can be nested as well.
+
+This sets up a simple static configuration for \texttt{eth0}. \texttt{proto} specifies the
+protocol used for the interface. The default image usually provides \texttt{'none'}
+\texttt{'static'}, \texttt{'dhcp'} and \texttt{'pppoe'}. Others can be added by installing additional
+packages.
+
+When using the \texttt{'static'} method like in the example, the options \texttt{ipaddr} and
+\texttt{netmask} are mandatory, while \texttt{gateway} and \texttt{dns} are optional.
+DHCP currently only accepts \texttt{ipaddr} (IP address to request from the server)
+and \texttt{hostname} (client hostname identify as) - both are optional.
+
+PPP based protocols (\texttt{pppoe}, \texttt{pptp}, ...) accept these options:
+\begin{itemize}
+ \item{username} \\
+ The PPP username (usually with PAP authentication)
+ \item{password} \\
+ The PPP password
+ \item{keepalive} \\
+ Ping the PPP server (using LCP). The value of this option
+ specifies the maximum number of failed pings before reconnecting.
+ The ping interval defaults to 5, but can be changed by appending
+ ",<interval>" to the keepalive value
+ \item{demand} \\
+ Use Dial on Demand (value specifies the maximum idle time.
+
+ \item{server: (pptp)} \\
+ The remote pptp server IP
+\end{itemize}
+
+For all protocol types, you can also specify the MTU by using the \texttt{mtu} option.
+
+
+\subsubsection{Setting up the switch (currently broadcom only)}
+
+The switch configuration is set by adding a \texttt{'switch'} config section.
+Example:
+
+\begin{Verbatim}
+config switch eth0
+ option vlan0 "1 2 3 4 5*"
+ option vlan1 "0 5"
+\end{Verbatim}
+
+On Broadcom hardware the section name needs to be eth0, as the switch driver
+does not detect the switch on any other physical device.
+Every vlan option needs to have the name vlan<n> where <n> is the VLAN number
+as used in the switch driver.
+As value it takes a list of ports with these optional suffixes:
+
+\begin{itemize}
+ \item{\texttt{'*'}:}
+ Set the default VLAN (PVID) of the Port to the current VLAN
+ \item{\texttt{'u'}:}
+ Force the port to be untagged
+ \item{\texttt{'t'}:}
+ Force the port to be tagged
+\end{itemize}
+
+The CPU port defaults to tagged, all other ports to untagged.
+On Broadcom hardware the CPU port is always 5. The other ports may vary with
+different hardware.