diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/adding.tex | 16 | ||||
| -rw-r--r-- | docs/init-scripts.tex | 4 |
2 files changed, 10 insertions, 10 deletions
diff --git a/docs/adding.tex b/docs/adding.tex index 34e13ae..2695a76 100644 --- a/docs/adding.tex +++ b/docs/adding.tex @@ -121,15 +121,15 @@ Scroll over the firmware to find printable words that can be significant. \subsubsection{Amount of flash memory} -Linux can hardly fit in a 2MB flash device, once you have open the device and -located the flash chip, try to find other the Internet its characteristics. If +Linux can hardly fit in a 2MB flash device, once you have opened the device and +located the flash chip, try to find its characteristics on the Internet. If your flash chip is a 2MB or less device, your device is most likely to run a proprietary OS such as WindRiver VxWorks, or a custom manufacturer OS like Zyxel ZynOS. -OpenWrt does not currently run on devices which have equal or less than 2MB of -flash memory. This limitation will probably not be worked around since those -devices are most of the time micro routers, or Wireless Access Points, which are -not the main OpenWrt target. +OpenWrt does not currently run on devices which have 2MB or less of flash memory. +This limitation will probably not be worked around since those devices are most +of the time micro-routers, or Wireless Access Points, which are not the main +OpenWrt target. \subsubsection{Pluging a serial port} @@ -140,8 +140,8 @@ easily notice if the device uses a Linux kenrel or something different. \subsection{Finding and using the manufacturer SDK} Once you are sure your device run a Linux based firmware, you will be able to start -hacking on it. If the manufacturer respect the GPL, it will have release with the -device, a Sample Development Kit. +hacking on it. If the manufacturer respected the GPL, it will have released a Sample +Development Kit with the device. \subsubsection{GPL violations} diff --git a/docs/init-scripts.tex b/docs/init-scripts.tex index e1d96a2..ea74ded 100644 --- a/docs/init-scripts.tex +++ b/docs/init-scripts.tex @@ -24,8 +24,8 @@ This is done by the wrapper script \texttt{/etc/rc.common}. script should provide. \texttt{start()} is called when the user runs \texttt{/etc/init.d/httpd start} or (if the script is enabled and does not override this behavior) at system boot time. -Enabling and disabling init scripts is done by running \texttt{/etc/init.d/\textit{name} start} -or \texttt{/etc/init.d/\textit{name} stop}. This creates or removes symbolic links to the +Enabling and disabling init scripts is done by running \texttt{/etc/init.d/\textit{name} enable} +or \texttt{/etc/init.d/\textit{name} disable}. This creates or removes symbolic links to the init script in \texttt{/etc/rc.d}, which is processed by \texttt{/etc/init.d/rcS} at boot time. The order in which these scripts are run is defined in the variable \texttt{START} in the init |