diff options
Diffstat (limited to 'obsolete-buildroot/make/openwrt.mk')
| -rw-r--r-- | obsolete-buildroot/make/openwrt.mk | 241 |
1 files changed, 0 insertions, 241 deletions
diff --git a/obsolete-buildroot/make/openwrt.mk b/obsolete-buildroot/make/openwrt.mk deleted file mode 100644 index 6b77c2c..0000000 --- a/obsolete-buildroot/make/openwrt.mk +++ /dev/null @@ -1,241 +0,0 @@ -# Makefile for to build the base openwrt -# -# Copyright (C) 2004 Manuel Novoa III <mjn3@uclibc.org> -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -# -###################################################################### -# -# WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! -# -# Currently the dependencies are not all handled. But that's true of -# our buildroot in general, since it wasn't really set up for end users. - -OPENWRT_TARGETS:= $(STAGING_DIR)/bin/sstrip gcc3_3 openwrt-linux openwrt-kmodules.tar.bz2 \ - openwrt-shared openwrt-mtd openwrt-nvram openwrt-wlconf \ - bridge dnsmasq1 iptables wtools busybox \ - openwrt-rootprep - -.PHONY: $(OPENWRT_TARGETS) openwrt-code.bin - -openwrt-base: $(OPENWRT_TARGETS) - -###################################################################### - -WRT54G_SOURCE=wrt54gs.2.07.1.tgz -WRT54G_SITE=http://www.linksys.com/support/opensourcecode/wrt54gs/2.07.1 -WRT54G_DIR=$(BUILD_DIR)/WRT54GS - -LINUX_DIR=$(WRT54G_DIR)/release/src/linux/linux -LINUX_FORMAT=zImage -LINUX_BINLOC=arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz - -TARGET_MODULES_DIR:=$(TARGET_DIR)/lib/modules/2.4.20 - -$(LINUX_DIR)/.unpacked: $(WRT54G_DIR)/.prepared - -(cd $(BUILD_DIR); ln -sf $(LINUX_DIR) linux) - touch $(LINUX_DIR)/.unpacked - -$(LINUX_DIR)/.patched: $(WRT54G_DIR)/.prepared - $(SOURCE_DIR)/patch-kernel.sh $(LINUX_DIR) $(SOURCE_DIR)/openwrt/kernel/patches - # use replacement diag module code - cp -f $(SOURCE_DIR)/openwrt/kernel/diag.c $(LINUX_DIR)/drivers/net/diag/diag_led.c - cp -f $(SOURCE_DIR)/openwrt/kernel/linux.config $(LINUX_DIR)/.config - -(cd $(BUILD_DIR); ln -sf $(LINUX_DIR) linux) - -(cd $(LINUX_DIR)/arch/mips/brcm-boards/bcm947xx/; \ - rm -rf compressed; \ - tar jxvf $(SOURCE_DIR)/openwrt/kernel/compressed-20040531.tar.bz2; \ - ) - touch $(LINUX_DIR)/.patched - -$(LINUX_DIR)/.configured: $(LINUX_DIR)/.nf-patched $(LINUX_DIR)/.patched $(LINUX_DIR)/.bbc-patched - $(SED) "s,^CROSS_COMPILE.*,CROSS_COMPILE=$(KERNEL_CROSS),g;" $(LINUX_DIR)/Makefile - $(SED) "s,^CROSS_COMPILE.*,CROSS_COMPILE=$(KERNEL_CROSS),g;" $(LINUX_DIR)/arch/mips/Makefile - $(SED) "s,\-mcpu=,\-mtune=,g;" $(LINUX_DIR)/arch/mips/Makefile - make -C $(LINUX_DIR) oldconfig include/linux/version.h - touch $(LINUX_DIR)/.configured - -$(LINUX_DIR)/.depend_done: $(LINUX_DIR)/.configured $(GCC_BUILD_DIR2)/.installed - $(MAKE) -C $(LINUX_DIR) dep - touch $(LINUX_DIR)/.depend_done - -$(LINUX_DIR)/$(LINUX_BINLOC): $(LINUX_DIR)/.depend_done - $(MAKE) -C $(LINUX_DIR) $(LINUX_FORMAT) - -openwrt-kmodules.tar.bz2: $(LINUX_DIR)/$(LINUX_BINLOC) - $(MAKE) -C $(LINUX_DIR) modules - $(MAKE) -C $(LINUX_DIR) DEPMOD=true \ - INSTALL_MOD_PATH=$(LINUX_DIR)/modules modules_install - tar -C $(LINUX_DIR)/modules/lib -cjf openwrt-kmodules.tar.bz2 modules - -openwrt-linux: $(LINUX_DIR)/$(LINUX_BINLOC) - -$(DL_DIR)/$(WRT54G_SOURCE): - $(WGET) -P $(DL_DIR) $(WRT54G_SITE)/$(WRT54G_SOURCE) - -$(WRT54G_DIR)/.source: $(DL_DIR)/$(WRT54G_SOURCE) - zcat $(DL_DIR)/$(WRT54G_SOURCE) | tar -C $(BUILD_DIR) -xvf - WRT54GS/README.TXT WRT54GS/release - touch $(WRT54G_DIR)/.source - -$(WRT54G_DIR)/.prepared: $(WRT54G_DIR)/.source - $(SOURCE_DIR)/patch-kernel.sh $(WRT54G_DIR) $(SOURCE_DIR)/openwrt/patches - touch $(WRT54G_DIR)/.prepared - -###################################################################### - -OPENWRT_ROOT_SKEL:=root.tar.gz -OPENWRT_SITE=http://openwrt.ksilebo.net/cgi-bin/viewcvs.cgi/root - -$(DL_DIR)/$(OPENWRT_ROOT_SKEL): - $(WGET) -P $(DL_DIR) $(OPENWRT_SITE)/$(OPENWRT_ROOT_SKEL) - -###################################################################### - -OPENWRT_SRCBASE:=$(WRT54G_DIR)/release/src -OPENWRT_SHARED_BUILD_DIR:=$(OPENWRT_SRCBASE)/router/shared -OPENWRT_SHARED_TARGET_BINARY:=usr/lib/libshared.so - -$(TARGET_DIR)/$(OPENWRT_SHARED_TARGET_BINARY): $(WRT54G_DIR)/.source - $(MAKE) -C $(OPENWRT_SHARED_BUILD_DIR) -f Makefile-openwrt \ - SRCBASE=$(OPENWRT_SRCBASE) INSTALLDIR=$(TARGET_DIR) \ - CC=$(TARGET_CC) LD=$(TARGET_CROSS)ld STRIP="$(STRIP)" \ - CFLAGS="$(TARGET_CFLAGS) -I. -I$(OPENWRT_SRCBASE)/include -Wall -I$(OPENWRT_SRCBASE)/" \ - install - -openwrt-shared: $(TARGET_DIR)/$(OPENWRT_SHARED_TARGET_BINARY) - -openwrt-shared-clean: - -$(MAKE) -C $(OPENWRT_SHARED_BUILD_DIR) clean - -###################################################################### - -OPENWRT_NVRAM_BUILD_DIR:=$(OPENWRT_SRCBASE)/router/nvram -OPENWRT_NVRAM_TARGET_BINARY:=usr/sbin/nvram - -$(TARGET_DIR)/$(OPENWRT_NVRAM_TARGET_BINARY): $(WRT54G_DIR)/.source - $(MAKE) -C $(OPENWRT_NVRAM_BUILD_DIR) \ - SRCBASE=$(OPENWRT_SRCBASE) INSTALLDIR=$(TARGET_DIR) \ - CC=$(TARGET_CC) LD=$(TARGET_CROSS)ld STRIP="$(STRIP)" \ - CFLAGS="$(TARGET_CFLAGS) -I. -I$(OPENWRT_SRCBASE)/include -Wall -DOPENWRT_NVRAM" \ - install - - -openwrt-nvram: $(TARGET_DIR)/$(OPENWRT_NVRAM_TARGET_BINARY) - -openwrt-nvram-clean: - -$(MAKE) -C $(OPENWRT_NVRAM_BUILD_DIR) clean - -###################################################################### - -OPENWRT_MTD_BUILD_DIR:=$(OPENWRT_SRCBASE)/router/rc -OPENWRT_MTD_TARGET_BINARY:=sbin/mtd - -$(TARGET_DIR)/$(OPENWRT_MTD_TARGET_BINARY): $(WRT54G_DIR)/.source $(TARGET_DIR)/$(OPENWRT_NVRAM_TARGET_BINARY) # need libnvram - $(MAKE) -C $(OPENWRT_MTD_BUILD_DIR) -f Makefile-openwrt \ - TOP=$(OPENWRT_SRCBASE)/router \ - SRCBASE=$(OPENWRT_SRCBASE) INSTALLDIR=$(TARGET_DIR) \ - CC=$(TARGET_CC) LD=$(TARGET_CROSS)ld STRIP="$(STRIP)" \ - CFLAGS="$(TARGET_CFLAGS) -I. -I$(OPENWRT_SRCBASE)/router/shared -I$(OPENWRT_SRCBASE)/include -Wall -I$(OPENWRT_SRCBASE)/" \ - install - -openwrt-mtd: $(TARGET_DIR)/$(OPENWRT_MTD_TARGET_BINARY) - -openwrt-mtd-clean: - -$(MAKE) -C $(OPENWRT_MTD_BUILD_DIR) clean - -###################################################################### - -OPENWRT_WLCONF_BUILD_DIR:=$(OPENWRT_SRCBASE)/router/wlconf -OPENWRT_WLCONF_TARGET_BINARY:=usr/sbin/wlconf - -$(TARGET_DIR)/$(OPENWRT_WLCONF_TARGET_BINARY): $(WRT54G_DIR)/.source - $(MAKE) -C $(OPENWRT_WLCONF_BUILD_DIR) \ - TOP=$(OPENWRT_SRCBASE)/router \ - SRCBASE=$(OPENWRT_SRCBASE) INSTALLDIR=$(TARGET_DIR) \ - CC=$(TARGET_CC) LD=$(TARGET_CROSS)ld STRIP="$(STRIP)" \ - CFLAGS="$(TARGET_CFLAGS) -I. -I$(OPENWRT_SRCBASE)/router/shared -I$(OPENWRT_SRCBASE)/include -Wall" \ - install - - -openwrt-wlconf: $(TARGET_DIR)/$(OPENWRT_WLCONF_TARGET_BINARY) - -openwrt-wlconf-clean: - -$(MAKE) -C $(OPENWRT_WLCONF_BUILD_DIR) clean - -###################################################################### - -openwrt-rootprep: - # tmp - mkdir -p $(TARGET_DIR)/tmp - chmod a+rwxt $(TARGET_DIR)/tmp - ln -sf /tmp $(TARGET_DIR)/var - rm -f $(TARGET_DIR)/usr/tmp - ln -sf ../tmp $(TARGET_DIR)/usr/tmp - # dev - mkdir -p $(TARGET_DIR)/dev - # etc - mkdir -p $(TARGET_DIR)/etc - ln -sf /tmp/resolv.conf $(TARGET_DIR)/etc/resolv.conf - # miscellaneous - mkdir -p $(TARGET_DIR)/mnt - mkdir -p $(TARGET_DIR)/proc - mkdir -p $(TARGET_DIR)/jffs - mkdir -p $(TARGET_DIR)/rom - # modules - mkdir -p $(TARGET_MODULES_DIR) - cp $(LINUX_DIR)/drivers/net/wl/wl.o $(TARGET_MODULES_DIR) - #cp $(LINUX_DIR)/drivers/net/et.4702/et.4702.o $(TARGET_MODULES_DIR) - cp $(LINUX_DIR)/drivers/net/et/et.o $(TARGET_MODULES_DIR) - cp $(LINUX_DIR)/drivers/net/diag/diag.o $(TARGET_MODULES_DIR) - -###################################################################### - -openwrt-prune: openwrt-base - # remove unneeded uClibc libs - rm -rf $(TARGET_DIR)/lib/libthread_db* - rm -rf $(TARGET_DIR)/lib/libpthread* - # remove unneeded uClibc utils - rm -f $(TARGET_DIR)/sbin/ldconfig - rm -f $(TARGET_DIR)/usr/bin/ldd - # remove other unneeded files - rm -f $(TARGET_DIR)/usr/sbin/iptables-save - rm -f $(TARGET_DIR)/usr/sbin/iptables-restore - rm -f $(TARGET_DIR)/usr/sbin/ip6tables - rm -f $(TARGET_DIR)/usr/lib/iptables/libip6* - -@find $(TARGET_DIR) -type f -perm +111 | xargs $(STAGING_DIR)/bin/sstrip 2>/dev/null || true; - -###################################################################### - -$(STAGING_DIR)/bin/sstrip: - $(CC) -o $(STAGING_DIR)/bin/sstrip $(SOURCE_DIR)/openwrt/tools/sstrip.c - -wrt-tools: - $(CC) -o $(WRT54G_DIR)/release/tools/trx $(SOURCE_DIR)/openwrt/tools/trx.c - $(CC) -o $(WRT54G_DIR)/release/tools/addpattern $(SOURCE_DIR)/openwrt/tools/addpattern.c - -openwrt-linux.trx: openwrt-prune squashfsroot wrt-tools - $(WRT54G_DIR)/release/tools/trx -o openwrt-linux.trx \ - $(LINUX_DIR)/$(LINUX_BINLOC) $(IMAGE) - -openwrt-gs-code.bin: openwrt-linux.trx - $(WRT54G_DIR)/release/tools/addpattern -i openwrt-linux.trx \ - -o openwrt-gs-code.bin -g - -openwrt-g-code.bin: openwrt-gs-code.bin - sed -e "1s,^W54S,W54G," < openwrt-gs-code.bin > openwrt-g-code.bin - -openwrt-code.bin: openwrt-gs-code.bin openwrt-g-code.bin - -###################################################################### |