diff options
Diffstat (limited to 'openwrt/target/linux/package/base-files/include/wlioctl.h')
| -rw-r--r-- | openwrt/target/linux/package/base-files/include/wlioctl.h | 1094 |
1 files changed, 1094 insertions, 0 deletions
diff --git a/openwrt/target/linux/package/base-files/include/wlioctl.h b/openwrt/target/linux/package/base-files/include/wlioctl.h new file mode 100644 index 0000000..d5ef11f --- /dev/null +++ b/openwrt/target/linux/package/base-files/include/wlioctl.h @@ -0,0 +1,1094 @@ +/* + * Custom OID/ioctl definitions for + * Broadcom 802.11abg Networking Device Driver + * + * Definitions subject to change without notice. + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#ifndef _wlioctl_h_ +#define _wlioctl_h_ + +#include <typedefs.h> +#include <proto/ethernet.h> +#include <proto/802.11.h> + +#if defined(__GNUC__) +#define PACKED __attribute__((packed)) +#else +#define PACKED +#endif + +#define WLC_ESSID_MAX_SIZE 32 + +#define WL_NUMRATES 255 /* max # of rates in a rateset */ + +typedef struct wl_rateset { + uint32 count; /* # rates in this set */ + uint8 rates[WL_NUMRATES]; /* rates in 500kbps units w/hi bit set if basic */ +} wl_rateset_t; + +#define WL_CHANSPEC_CHAN_MASK 0x0fff +#define WL_CHANSPEC_BAND_MASK 0xf000 +#define WL_CHANSPEC_BAND_SHIFT 12 +#define WL_CHANSPEC_BAND_A 0x1000 +#define WL_CHANSPEC_BAND_B 0x2000 + +/* + * Per-bss information structure. + */ + +#define WL_LEGACY_BSS_INFO_VERSION 106 /* an older supported version of wl_bss_info struct */ +#define WL_BSS_INFO_VERSION 107 /* current version of wl_bss_info struct */ + +typedef struct wl_bss_info106 { + uint version; /* version field */ + struct ether_addr BSSID; + uint8 SSID_len; + uint8 SSID[32]; + uint8 Privacy; /* 0=No WEP, 1=Use WEP */ + int16 RSSI; /* receive signal strength (in dBm) */ + uint16 beacon_period; /* units are Kusec */ + uint16 atim_window; /* units are Kusec */ + uint8 channel; /* Channel no. */ + int8 infra; /* 0=IBSS, 1=infrastructure, 2=unknown */ + struct { + uint count; /* # rates in this set */ + uint8 rates[12]; /* rates in 500kbps units w/hi bit set if basic */ + } rateset; /* supported rates */ + uint8 dtim_period; /* DTIM period */ + int8 phy_noise; /* noise right after tx (in dBm) */ + uint16 capability; /* Capability information */ + struct dot11_bcn_prb *prb; /* probe response frame (ioctl na) */ + uint16 prb_len; /* probe response frame length (ioctl na) */ + struct { + uint8 supported; /* wpa supported */ + uint8 multicast; /* multicast cipher */ + uint8 ucount; /* count of unicast ciphers */ + uint8 unicast[4]; /* unicast ciphers */ + uint8 acount; /* count of auth modes */ + uint8 auth[4]; /* Authentication modes */ + } wpa; +} wl_bss_info106_t; + +typedef struct wl_bss_info { + uint32 version; /* version field */ + uint32 length; /* byte length of data in this record, starting at version and including IEs */ + struct ether_addr BSSID; + uint16 beacon_period; /* units are Kusec */ + uint16 capability; /* Capability information */ + uint8 SSID_len; + uint8 SSID[32]; + struct { + uint count; /* # rates in this set */ + uint8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */ + } rateset; /* supported rates */ + uint8 channel; /* Channel no. */ + uint16 atim_window; /* units are Kusec */ + uint8 dtim_period; /* DTIM period */ + int16 RSSI; /* receive signal strength (in dBm) */ + int8 phy_noise; /* noise (in dBm) */ + uint32 ie_length; /* byte length of Information Elements */ + /* variable length Information Elements */ +} wl_bss_info_t; + +typedef struct wlc_ssid { + uint32 SSID_len; + uchar SSID[32]; +} wlc_ssid_t; + +typedef struct wl_scan_params { + wlc_ssid_t ssid; /* default is {0, ""} */ + struct ether_addr bssid;/* default is bcast */ + int8 bss_type; /* default is any, DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT */ + int8 scan_type; /* -1 use default, DOT11_SCANTYPE_ACTIVE/PASSIVE */ + int32 nprobes; /* -1 use default, number of probes per channel */ + int32 active_time; /* -1 use default, dwell time per channel for active scanning */ + int32 passive_time; /* -1 use default, dwell time per channel for passive scanning */ + int32 home_time; /* -1 use default, dwell time for the home channel between channel scans */ + int32 channel_num; /* 0 use default (all available channels), count of channels in channel_list */ + uint16 channel_list[1]; /* list of chanspecs */ +} wl_scan_params_t; +/* size of wl_scan_params not including variable length array */ +#define WL_SCAN_PARAMS_FIXED_SIZE 64 + +typedef struct wl_scan_results { + uint32 buflen; + uint32 version; + uint32 count; + wl_bss_info_t bss_info[1]; +} wl_scan_results_t; +/* size of wl_scan_results not including variable length array */ +#define WL_SCAN_RESULTS_FIXED_SIZE 12 + +/* uint32 list */ +typedef struct wl_uint32_list { + /* in - # of elements, out - # of entries */ + uint32 count; + /* variable length uint32 list */ + uint32 element[1]; +} wl_uint32_list_t; + +#define WLC_CNTRY_BUF_SZ 4 /* Country string is 3 bytes + NULL */ + +typedef struct wl_channels_in_country { + uint32 buflen; + uint32 band; + char country_abbrev[WLC_CNTRY_BUF_SZ]; + uint32 count; + uint32 channel[1]; +} wl_channels_in_country_t; + +typedef struct wl_country_list { + uint32 buflen; + uint32 band_set; + uint32 band; + uint32 count; + char country_abbrev[1]; +} wl_country_list_t; + +#define WL_RM_TYPE_BASIC 1 +#define WL_RM_TYPE_CCA 2 +#define WL_RM_TYPE_RPI 3 + +#define WL_RM_FLAG_PARALLEL (1<<0) + +#define WL_RM_FLAG_LATE (1<<1) +#define WL_RM_FLAG_INCAPABLE (1<<2) +#define WL_RM_FLAG_REFUSED (1<<3) + +typedef struct wl_rm_req_elt { + int8 type; + int8 flags; + uint16 chanspec; + uint32 token; /* token for this measurement */ + uint32 tsf_h; /* TSF high 32-bits of Measurement start time */ + uint32 tsf_l; /* TSF low 32-bits */ + uint32 dur; /* TUs */ +} wl_rm_req_elt_t; + +typedef struct wl_rm_req { + uint32 token; /* overall measurement set token */ + uint32 count; /* number of measurement reqests */ + wl_rm_req_elt_t req[1]; /* variable length block of requests */ +} wl_rm_req_t; +#define WL_RM_REQ_FIXED_LEN 8 + +typedef struct wl_rm_rep_elt { + int8 type; + int8 flags; + uint16 chanspec; + uint32 token; /* token for this measurement */ + uint32 tsf_h; /* TSF high 32-bits of Measurement start time */ + uint32 tsf_l; /* TSF low 32-bits */ + uint32 dur; /* TUs */ + uint32 len; /* byte length of data block */ + uint8 data[1]; /* variable length data block */ +} wl_rm_rep_elt_t; +#define WL_RM_REP_ELT_FIXED_LEN 24 /* length excluding data block */ + +#define WL_RPI_REP_BIN_NUM 8 +typedef struct wl_rm_rpi_rep { + uint8 rpi[WL_RPI_REP_BIN_NUM]; + int8 rpi_max[WL_RPI_REP_BIN_NUM]; +} wl_rm_rpi_rep_t; + +typedef struct wl_rm_rep { + uint32 token; /* overall measurement set token */ + uint32 len; /* length of measurement report block */ + wl_rm_rep_elt_t rep[1]; /* variable length block of reports */ +} wl_rm_rep_t; +#define WL_RM_REP_FIXED_LEN 8 + + +#define WLC_MAX_KEY_SIZE 32 /* max size of any key */ +#define WLC_MAX_IV_SIZE 16 /* max size of any IV */ +#define WLC_EXT_IV_FLAG (1<<5) /* flag to indicate IV is > 4 bytes */ +#define WLC_MAX_DEFAULT_KEYS 4 /* # of default WEP keys */ +#define WLC_MAX_KEYS 54 /* Max # of WEP keys */ +#define WLC_WEP1_KEY_SIZE 5 /* max size of any WEP key */ +#define WLC_WEP1_KEY_HEX_SIZE 10 /* size of WEP key in hex. */ +#define WLC_WEP128_KEY_SIZE 13 /* max size of any WEP key */ +#define WLC_WEP128_KEY_HEX_SIZE 26 /* size of WEP key in hex. */ +#define WLC_TKIP_MIC_SIZE 8 /* size of TKIP MIC */ +#define WLC_TKIP_EOM_SIZE 7 /* max size of TKIP EOM */ +#define WLC_TKIP_EOM_FLAG 0x5a /* TKIP EOM flag byte */ +#define WLC_TKIP_KEY_SIZE 32 /* size of any TKIP key */ +#define WLC_TKIP_MIC_AUTH_TX 16 /* offset to Authenticator MIC TX key */ +#define WLC_TKIP_MIC_AUTH_RX 24 /* offset to Authenticator MIC RX key */ +#define WLC_TKIP_MIC_SUP_RX 16 /* offset to Supplicant MIC RX key */ +#define WLC_TKIP_MIC_SUP_TX 24 /* offset to Supplicant MIC TX key */ +#define WLC_TKIP_P1_KEY_SIZE 10 /* size of TKHash Phase1 output, in bytes */ +#define WLC_TKIP_P2_KEY_SIZE 16 /* size of TKHash Phase2 output */ +#define WLC_AES_KEY_SIZE 16 /* size of AES key */ + + +typedef enum sup_auth_status { + WLC_SUP_DISCONNECTED = 0, + WLC_SUP_CONNECTING, + WLC_SUP_IDREQUIRED, + WLC_SUP_AUTHENTICATING, + WLC_SUP_AUTHENTICATED, + WLC_SUP_KEYXCHANGE, + WLC_SUP_KEYED +} sup_auth_status_t; + +/* Enumerate crypto algorithms */ +#define CRYPTO_ALGO_OFF 0 +#define CRYPTO_ALGO_WEP1 1 +#define CRYPTO_ALGO_TKIP 2 +#define CRYPTO_ALGO_WEP128 3 +#define CRYPTO_ALGO_AES_CCM 4 +#define CRYPTO_ALGO_AES_OCB_MSDU 5 +#define CRYPTO_ALGO_AES_OCB_MPDU 6 +#define CRYPTO_ALGO_NALG 7 + +#define WSEC_GEN_MIC_ERROR 0x0001 +#define WSEC_GEN_REPLAY 0x0002 + +#define WL_SOFT_KEY (1 << 0) /* Indicates this key is using soft encrypt */ +#define WL_PRIMARY_KEY (1 << 1) /* Indicates this key is the primary (ie tx) key */ +#define WL_KF_RES_4 (1 << 4) /* Reserved for backward compat */ +#define WL_KF_RES_5 (1 << 5) /* Reserved for backward compat */ + + +typedef struct wlc_tkip_info { + uint16 phase1[WLC_TKIP_P1_KEY_SIZE/sizeof(uint16)]; /* tkhash phase1 result */ + uint8 phase2[WLC_TKIP_P2_KEY_SIZE]; /* tkhash phase2 result */ + uint32 micl; + uint32 micr; +} tkip_info_t; + +typedef struct _wsec_iv { + uint32 hi; /* upper 32 bits of IV */ + uint16 lo; /* lower 16 bits of IV */ +} wsec_iv_t; + +typedef struct wsec_key { + uint32 index; /* key index */ + uint32 len; /* key length */ + uint8 data[WLC_MAX_KEY_SIZE]; /* key data */ + tkip_info_t tkip_tx; /* tkip transmit state */ + tkip_info_t tkip_rx; /* tkip receive state */ + uint32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */ + uint32 flags; /* misc flags */ + uint32 algo_hw; /* cache for hw register*/ + uint32 aes_mode; /* cache for hw register*/ + int iv_len; /* IV length */ + int iv_initialized; /* has IV been initialized already? */ + int icv_len; /* ICV length */ + wsec_iv_t rxiv; /* Rx IV */ + wsec_iv_t txiv; /* Tx IV */ + struct ether_addr ea; /* per station */ +} wsec_key_t; + + + +typedef struct wl_wsec_key { + uint32 index; /* key index */ + uint32 len; /* key length */ + uint8 data[DOT11_MAX_KEY_SIZE]; /* key data */ + uint32 pad_1[18]; + uint32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */ + uint32 flags; /* misc flags */ + uint32 pad_2[2]; + int pad_3; + int iv_initialized; /* has IV been initialized already? */ + int pad_4; + /* Rx IV */ + struct { + uint32 hi; /* upper 32 bits of IV */ + uint16 lo; /* lower 16 bits of IV */ + } rxiv; + uint32 pad_5[2]; + struct ether_addr ea; /* per station */ +} wl_wsec_key_t; + +/* For use with wlc_wep_key.flags */ +#define WSEC_PRIMARY_KEY (1 << 1) /* Indicates this key is the primary (ie tx) key */ +#define WSEC_TKIP_ERROR (1 << 2) /* Provoke deliberate error */ + +#define WSEC_MIN_PSK_LEN 8 +#define WSEC_MAX_PSK_LEN 64 + +/* Flag for key material needing passhash'ing */ +#define WSEC_PASSPHRASE (1<<0) + +/* recepticle for WLC_SET_WSEC_PMK parameter */ +typedef struct { + ushort key_len; /* octets in key material */ + ushort flags; /* key handling qualification */ + uint8 key[WSEC_MAX_PSK_LEN]; /* PMK material */ +} wsec_pmk_t; + +/* wireless security bitvec */ +#define WEP_ENABLED 1 +#define TKIP_ENABLED 2 +#define AES_ENABLED 4 +#define WSEC_SWFLAG 8 + +#define WSEC_SW(wsec) ((wsec) & WSEC_SWFLAG) +#define WSEC_HW(wsec) (!WSEC_SW(wsec)) +#define WSEC_WEP_ENABLED(wsec) ((wsec) & WEP_ENABLED) +#define WSEC_TKIP_ENABLED(wsec) ((wsec) & TKIP_ENABLED) +#define WSEC_AES_ENABLED(wsec) ((wsec) & AES_ENABLED) +#define WSEC_ENABLED(wsec) ((wsec) & (WEP_ENABLED | TKIP_ENABLED | AES_ENABLED)) + + +/* wireless authentication bit vector */ +#define WPA_ENABLED 1 +#define PSK_ENABLED 2 + +#define WAUTH_WPA_ENABLED(wauth) ((wauth) & WPA_ENABLED) +#define WAUTH_PSK_ENABLED(wauth) ((wauth) & PSK_ENABLED) +#define WAUTH_ENABLED(wauth) ((wauth) & (WPA_ENABLED | PSK_ENABLED)) + +/* group/mcast cipher */ +#define WPA_MCAST_CIPHER(wsec) (((wsec) & TKIP_ENABLED) ? WPA_CIPHER_TKIP : \ + ((wsec) & AES_ENABLED) ? WPA_CIPHER_AES_CCM : \ + WPA_CIPHER_NONE) + + +typedef struct wl_led_info { + uint32 index; /* led index */ + uint32 behavior; + bool activehi; +} wl_led_info_t; + +/* + * definitions for driver messages passed from WL to NAS. + */ +/* Use this to recognize wpa and 802.1x driver messages. */ +static const uint8 wl_wpa_snap_template[] = + { 0xaa, 0xaa, 0x03, 0x00, 0x90, 0x4c }; + +#define WL_WPA_MSG_IFNAME_MAX 16 + +/* WPA driver message */ +typedef struct wl_wpa_header { + struct ether_header eth; + struct dot11_llc_snap_header snap; + uint8 version; + uint8 type; + /* version 2 additions */ + char ifname[WL_WPA_MSG_IFNAME_MAX]; + /* version specific data */ + /* uint8 data[1]; */ +} wl_wpa_header_t PACKED; + +/* + * definitions for 802.2 messages passed from WL to NAS. + */ +/* This seems not to be defined outside the kernel on linux. */ +#ifndef ETH_P_802_2 +#define ETH_P_802_2 4 +#endif + +#define WL_WPA_HEADER_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN + 2 + WL_WPA_MSG_IFNAME_MAX) + +/* WPA driver message ethertype - private between wlc and nas */ +#define WL_WPA_ETHER_TYPE 0x9999 + +/* WPA driver message current version */ +#define WL_WPA_MSG_VERSION 2 + +/* Type field values for the 802.2 driver messages for WPA. */ +#define WLC_ASSOC_MSG 1 +#define WLC_DISASSOC_MSG 2 +#define WLC_PTK_MIC_MSG 3 +#define WLC_GTK_MIC_MSG 4 + +/* Use this to recognize 802.2 driver messages. */ +static const uint8 wpa_snap_template[] = + { 0xaa, 0xaa, 0x03, 0x00, 0x90, 0x4c }; + + +/* 802.1x driver message */ +typedef struct wl_eapol_header { + struct ether_header eth; + struct dot11_llc_snap_header snap; + uint8 version; + uint8 reserved; + char ifname[WL_WPA_MSG_IFNAME_MAX]; + /* version specific data */ + /* uint8 802_1x_msg[1]; */ +} wl_eapol_header_t PACKED; + +#define WL_EAPOL_HEADER_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN + 2 + WL_WPA_MSG_IFNAME_MAX) + +/* 802.1x driver message ethertype - private between wlc and nas */ +#define WL_EAPOL_ETHER_TYPE 0x999A + +/* 802.1x driver message current version */ +#define WL_EAPOL_MSG_VERSION 1 + +/* srom read/write struct passed through ioctl */ +typedef struct { + uint byteoff; /* byte offset */ + uint nbytes; /* number of bytes */ + uint16 buf[1]; +} srom_rw_t; + +/* R_REG and W_REG struct passed through ioctl */ +typedef struct { + uint32 byteoff; /* byte offset of the field in d11regs_t */ + uint32 val; /* read/write value of the field */ + uint32 size; /* sizeof the field */ +} rw_reg_t; + +/* Structure used by GET/SET_ATTEN ioctls */ +typedef struct { + uint16 auto_ctrl; /* 1: Automatic control, 0: overriden */ + uint16 bb; /* Baseband attenuation */ + uint16 radio; /* Radio attenuation */ + uint16 txctl1; /* Radio TX_CTL1 value */ +} atten_t; + +/* Used to get specific STA parameters */ +typedef struct { + uint32 val; + struct ether_addr ea; +} scb_val_t; + +/* callback registration data types */ + +typedef struct _mac_event_params { + uint msg; + struct ether_addr *addr; + uint result; + uint status; + uint auth_type; +} mac_event_params_t; + +typedef struct _mic_error_params { + struct ether_addr *ea; + bool group; + bool flush_txq; +} mic_error_params_t; + +typedef enum _wl_callback { + WL_MAC_EVENT_CALLBACK = 0, + WL_LINK_UP_CALLBACK, + WL_LINK_DOWN_CALLBACK, + WL_MIC_ERROR_CALLBACK, + WL_LAST_CALLBACK +} wl_callback_t; + +typedef struct _callback { + void (*fn)(void *, void *); + void *context; +} callback_t; + +typedef struct _scan_callback { + void (*fn)(void *); + void *context; +} scan_callback_t; + +/* used to register an arbitrary callback via the IOCTL interface */ +typedef struct _set_callback { + int index; + callback_t callback; +} set_callback_t; + + + +/* Event data type */ +typedef struct { + uint msg; /* Message (see below) */ + struct ether_addr *addr; /* Station address (if applicable) */ + uint status; /* Status code (see below) */ + uint reason; /* Reason code (if applicable) */ + uint auth_type; /* WLC_E_AUTH */ + bool link; /* WLC_E_LINK */ + bool group; /* WLC_E_MIC_ERROR */ + bool flush_txq; /* WLC_E_MIC_ERROR */ +} wlc_event_t; + +typedef struct { + uint16 ver; /* version of this struct */ + uint16 cap; /* sta's advertized capabilities */ + uint32 flags; /* flags defined below */ + uint32 idle; /* time since data pkt rx'd from sta */ + struct ether_addr ea; /* Station address */ + wl_rateset_t rateset; /* rateset in use */ +} sta_info_t; + +#define WL_STA_INFO_LEN 300 +#define WL_STA_VER 1 + +/* flags fields */ +#define WL_STA_BRCM 0x01 +#define WL_STA_WME 0x02 +#define WL_STA_ABCAP 0x04 +#define WL_STA_AUTHE 0x08 +#define WL_STA_ASSOC 0x10 +#define WL_STA_AUTHO 0x20 + +/* Event messages */ +#define WLC_E_SET_SSID 1 +#define WLC_E_JOIN 2 +#define WLC_E_START 3 +#define WLC_E_AUTH 4 +#define WLC_E_AUTH_IND 5 +#define WLC_E_DEAUTH 6 +#define WLC_E_DEAUTH_IND 7 +#define WLC_E_ASSOC 8 +#define WLC_E_ASSOC_IND 9 +#define WLC_E_REASSOC 10 +#define WLC_E_REASSOC_IND 11 +#define WLC_E_DISASSOC 12 +#define WLC_E_DISASSOC_IND 13 +#define WLC_E_QUIET_START 14 /* 802.11h Quiet period started */ +#define WLC_E_QUIET_END 15 /* 802.11h Quiet period ended */ +#define WLC_E_GOT_BEACONS 16 +#define WLC_E_LINK 17 /* Link indication */ +#define WLC_E_MIC_ERROR 18 /* TKIP MIC error occurred */ +#define WLC_E_NDIS_LINK 19 /* NDIS style link indication */ +#define WLC_E_ROAM 20 +#define WLC_E_LAST 21 + +/* Event status codes */ +#define WLC_E_STATUS_SUCCESS 0 +#define WLC_E_STATUS_FAIL 1 +#define WLC_E_STATUS_TIMEOUT 2 +#define WLC_E_STATUS_NO_NETWORKS 3 +#define WLC_E_STATUS_ABORT 4 + +typedef struct wlc_event_cb { + uint msg; /* Event message or 0 for all */ + void (*fn)(void *, wlc_event_t *); /* Callback function */ + void *context; /* Passed to callback function */ + struct wlc_event_cb *next; /* Next in the chain */ +} wlc_event_cb_t; + +/* + * Country locale determines which channels are available to us. + */ +typedef enum _wlc_locale { + WLC_WW = 0, /* Worldwide */ + WLC_THA, /* Thailand */ + WLC_ISR, /* Israel */ + WLC_JDN, /* Jordan */ + WLC_PRC, /* China */ + WLC_JPN, /* Japan */ + WLC_FCC, /* USA */ + WLC_EUR, /* Europe */ + WLC_USL, /* US Low Band only */ + WLC_JPH, /* Japan High Band only */ + WLC_ALL, /* All the channels in this band */ + WLC_11D, /* Represents locale recieved by 11d beacons */ + WLC_LAST_LOCALE, + WLC_UNDEFINED_LOCALE = 0xf +} wlc_locale_t; + +/* channel encoding */ +typedef struct channel_info { + int hw_channel; + int target_channel; + int scan_channel; +} channel_info_t; + +/* For ioctls that take a list of MAC addresses */ +struct maclist { + uint count; /* number of MAC addresses */ + struct ether_addr ea[1]; /* variable length array of MAC addresses */ +}; + +/* get pkt count struct passed through ioctl */ +typedef struct get_pktcnt { + uint rx_good_pkt; + uint rx_bad_pkt; + uint tx_good_pkt; + uint tx_bad_pkt; +} get_pktcnt_t; + +/* Linux network driver ioctl encoding */ +typedef struct wl_ioctl { + uint cmd; /* common ioctl definition */ + void *buf; /* pointer to user buffer */ + uint len; /* length of user buffer */ + bool set; /* get or set request (optional) */ + uint used; /* bytes read or written (optional) */ + uint needed; /* bytes needed (optional) */ +} wl_ioctl_t; + +/* + * Structure for passing hardware and software + * revision info up from the driver. + */ +typedef struct wlc_rev_info { + uint vendorid; /* PCI vendor id */ + uint deviceid; /* device id of chip */ + uint radiorev; /* radio revision */ + uint chiprev; /* chip revision */ + uint corerev; /* core revision */ + uint boardid; /* board identifier (usu. PCI sub-device id) */ + uint boardvendor; /* board vendor (usu. PCI sub-vendor id) */ + uint boardrev; /* board revision */ + uint driverrev; /* driver version */ + uint ucoderev; /* microcode version */ + uint bus; /* bus type */ + uint chipnum; /* chip number */ +} wlc_rev_info_t; + +/* check this magic number */ +#define WLC_IOCTL_MAGIC 0x14e46c77 + +/* bump this number if you change the ioctl interface */ +#define WLC_IOCTL_VERSION 1 + +/* maximum length buffer required */ +#define WLC_IOCTL_MAXLEN 8192 + +/* common ioctl definitions */ +#define WLC_GET_MAGIC 0 +#define WLC_GET_VERSION 1 +#define WLC_UP 2 +#define WLC_DOWN 3 +#define WLC_GET_LOOP 4 +#define WLC_SET_LOOP 5 +#define WLC_DUMP 6 +#define WLC_GET_MSGLEVEL 7 +#define WLC_SET_MSGLEVEL 8 +#define WLC_GET_PROMISC 9 +#define WLC_SET_PROMISC 10 +#define WLC_OBSOLETE 11 +#define WLC_GET_RATE 12 +#define WLC_SET_RATE 13 +#define WLC_GET_INSTANCE 14 +#define WLC_GET_FRAG 15 +#define WLC_SET_FRAG 16 +#define WLC_GET_RTS 17 +#define WLC_SET_RTS 18 +#define WLC_GET_INFRA 19 +#define WLC_SET_INFRA 20 +#define WLC_GET_AUTH 21 +#define WLC_SET_AUTH 22 +#define WLC_GET_BSSID 23 +#define WLC_SET_BSSID 24 +#define WLC_GET_SSID 25 +#define WLC_SET_SSID 26 +#define WLC_RESTART 27 +#define WLC_DUMP_SCB 28 +#define WLC_GET_CHANNEL 29 +#define WLC_SET_CHANNEL 30 +#define WLC_GET_SRL 31 +#define WLC_SET_SRL 32 +#define WLC_GET_LRL 33 +#define WLC_SET_LRL 34 +#define WLC_GET_PLCPHDR 35 +#define WLC_SET_PLCPHDR 36 +#define WLC_GET_RADIO 37 +#define WLC_SET_RADIO 38 +#define WLC_GET_PHYTYPE 39 +#define WLC_DUMP_RATE 40 +#define WLC_SET_RATE_PARAMS 41 +#define WLC_GET_WEP 42 +#define WLC_SET_WEP 43 +#define WLC_GET_KEY 44 +#define WLC_SET_KEY 45 +#define WLC_GET_REGULATORY 46 +#define WLC_SET_REGULATORY 47 +#define WLC_GET_PASSIVE 48 /* added by nbd */ +#define WLC_SET_PASSIVE 49 /* added by nbd */ +#define WLC_SCAN 50 +#define WLC_SCAN_RESULTS 51 +#define WLC_DISASSOC 52 +#define WLC_REASSOC 53 +#define WLC_GET_ROAM_TRIGGER 54 +#define WLC_SET_ROAM_TRIGGER 55 +#define WLC_GET_ROAM_DELTA 56 +#define WLC_SET_ROAM_DELTA 57 +#define WLC_GET_ROAM_SCAN_PERIOD 58 +#define WLC_SET_ROAM_SCAN_PERIOD 59 +#define WLC_EVM 60 +#define WLC_GET_TXANT 61 +#define WLC_SET_TXANT 62 +#define WLC_GET_ANTDIV 63 +#define WLC_SET_ANTDIV 64 +#define WLC_GET_TXPWR 65 +#define WLC_SET_TXPWR 66 +#define WLC_GET_CLOSED 67 +#define WLC_SET_CLOSED 68 +#define WLC_GET_MACLIST 69 +#define WLC_SET_MACLIST 70 +#define WLC_GET_RATESET 71 +#define WLC_SET_RATESET 72 +#define WLC_GET_LOCALE 73 +#define WLC_SET_LOCALE 74 +#define WLC_GET_BCNPRD 75 +#define WLC_SET_BCNPRD 76 +#define WLC_GET_DTIMPRD 77 +#define WLC_SET_DTIMPRD 78 +#define WLC_GET_SROM 79 +#define WLC_SET_SROM 80 +#define WLC_GET_WEP_RESTRICT 81 +#define WLC_SET_WEP_RESTRICT 82 +#define WLC_GET_COUNTRY 83 +#define WLC_SET_COUNTRY 84 +#define WLC_GET_PM 85 +#define WLC_SET_PM 86 +#define WLC_GET_WAKE 87 +#define WLC_SET_WAKE 88 +#define WLC_GET_D11CNTS 89 +#define WLC_GET_FORCELINK 90 /* ndis only */ +#define WLC_SET_FORCELINK 91 /* ndis only */ +#define WLC_FREQ_ACCURACY 92 +#define WLC_CARRIER_SUPPRESS 93 +#define WLC_GET_PHYREG 94 +#define WLC_SET_PHYREG 95 +#define WLC_GET_RADIOREG 96 +#define WLC_SET_RADIOREG 97 +#define WLC_GET_REVINFO 98 +#define WLC_GET_UCANTDIV 99 +#define WLC_SET_UCANTDIV 100 +#define WLC_R_REG 101 +#define WLC_W_REG 102 +#define WLC_DIAG_LOOPBACK 103 +#define WLC_RESET_D11CNTS 104 +#define WLC_GET_MACMODE 105 +#define WLC_SET_MACMODE 106 +#define WLC_GET_MONITOR 107 /* added by nbd */ +#define WLC_SET_MONITOR 108 /* added by nbd */ +#define WLC_GET_GMODE 109 +#define WLC_SET_GMODE 110 +#define WLC_GET_LEGACY_ERP 111 +#define WLC_SET_LEGACY_ERP 112 +#define WLC_GET_RX_ANT 113 +#define WLC_GET_CURR_RATESET 114 /* current rateset */ +#define WLC_GET_SCANSUPPRESS 115 +#define WLC_SET_SCANSUPPRESS 116 +#define WLC_GET_AP 117 +#define WLC_SET_AP 118 +#define WLC_GET_EAP_RESTRICT 119 +#define WLC_SET_EAP_RESTRICT 120 +#define WLC_SCB_AUTHORIZE 121 +#define WLC_SCB_DEAUTHORIZE 122 +#define WLC_GET_WDSLIST 123 +#define WLC_SET_WDSLIST 124 +#define WLC_GET_ATIM 125 +#define WLC_SET_ATIM 126 +#define WLC_GET_RSSI 127 +#define WLC_GET_PHYANTDIV 128 +#define WLC_SET_PHYANTDIV 129 +#define WLC_AP_RX_ONLY 130 +#define WLC_GET_TX_PATH_PWR 131 +#define WLC_SET_TX_PATH_PWR 132 +#define WLC_GET_WSEC 133 +#define WLC_SET_WSEC 134 +#define WLC_GET_PHY_NOISE 135 +#define WLC_GET_BSS_INFO 136 +#define WLC_GET_PKTCNTS 137 +#define WLC_GET_LAZYWDS 138 +#define WLC_SET_LAZYWDS 139 +#define WLC_GET_BANDLIST 140 +#define WLC_GET_BAND 141 +#define WLC_SET_BAND 142 +#define WLC_SCB_DEAUTHENTICATE 143 +#define WLC_GET_SHORTSLOT 144 +#define WLC_GET_SHORTSLOT_OVERRIDE 145 +#define WLC_SET_SHORTSLOT_OVERRIDE 146 +#define WLC_GET_SHORTSLOT_RESTRICT 147 +#define WLC_SET_SHORTSLOT_RESTRICT 148 +#define WLC_GET_GMODE_PROTECTION 149 +#define WLC_GET_GMODE_PROTECTION_OVERRIDE 150 +#define WLC_SET_GMODE_PROTECTION_OVERRIDE 151 +#define WLC_UPGRADE 152 +#define WLC_GET_MRATE 153 +#define WLC_SET_MRATE 154 +#define WLC_GET_IGNORE_BCNS 155 +#define WLC_SET_IGNORE_BCNS 156 +#define WLC_GET_SCB_TIMEOUT 157 +#define WLC_SET_SCB_TIMEOUT 158 +#define WLC_GET_ASSOCLIST 159 +#define WLC_GET_CLK 160 +#define WLC_SET_CLK 161 +#define WLC_GET_UP 162 +#define WLC_OUT 163 +#define WLC_GET_WPA_AUTH 164 +#define WLC_SET_WPA_AUTH 165 +#define WLC_GET_UCFLAGS 166 +#define WLC_SET_UCFLAGS 167 +#define WLC_GET_PWRIDX 168 +#define WLC_SET_PWRIDX 169 +#define WLC_GET_TSSI 170 +#define WLC_GET_SUP_RATESET_OVERRIDE 171 +#define WLC_SET_SUP_RATESET_OVERRIDE 172 +#define WLC_SET_FAST_TIMER 173 +#define WLC_GET_FAST_TIMER 174 +#define WLC_SET_SLOW_TIMER 175 +#define WLC_GET_SLOW_TIMER 176 +#define WLC_DUMP_PHYREGS 177 +#define WLC_GET_GMODE_PROTECTION_CONTROL 178 +#define WLC_SET_GMODE_PROTECTION_CONTROL 179 +#define WLC_GET_PHYLIST 180 +#define WLC_ENCRYPT_STRENGTH 181 /* ndis only */ +#define WLC_DECRYPT_STATUS 182 /* ndis only */ +#define WLC_GET_KEY_SEQ 183 +#define WLC_GET_SCAN_CHANNEL_TIME 184 +#define WLC_SET_SCAN_CHANNEL_TIME 185 +#define WLC_GET_SCAN_UNASSOC_TIME 186 +#define WLC_SET_SCAN_UNASSOC_TIME 187 +#define WLC_GET_SCAN_HOME_TIME 188 +#define WLC_SET_SCAN_HOME_TIME 189 +#define WLC_GET_SCAN_PASSES 190 +#define WLC_SET_SCAN_PASSES 191 +#define WLC_GET_PRB_RESP_TIMEOUT 192 +#define WLC_SET_PRB_RESP_TIMEOUT 193 +#define WLC_GET_ATTEN 194 +#define WLC_SET_ATTEN 195 +#define WLC_GET_SHMEM 196 /* diag */ +#define WLC_SET_SHMEM 197 /* diag */ +#define WLC_GET_GMODE_PROTECTION_CTS 198 +#define WLC_SET_GMODE_PROTECTION_CTS 199 +#define WLC_SET_TKIP_MIC_FLAG 200 +#define WLC_SCB_DEAUTHENTICATE_FOR_REASON 201 +#define WLC_TKIP_COUNTERMEASURES 202 +#define WLC_GET_PIOMODE 203 +#define WLC_SET_PIOMODE 204 +#define WLC_SET_LED 209 +#define WLC_GET_LED 210 +#define WLC_GET_INTERFERENCE_MODE 211 +#define WLC_SET_INTERFERENCE_MODE 212 +#define WLC_GET_CHANNEL_QA 213 +#define WLC_START_CHANNEL_QA 214 +#define WLC_GET_CHANNEL_SEL 215 +#define WLC_START_CHANNEL_SEL 216 +#define WLC_GET_VALID_CHANNELS 217 +#define WLC_GET_FAKEFRAG 218 +#define WLC_SET_FAKEFRAG 219 +#define WLC_GET_PWROUT_PERCENTAGE 220 +#define WLC_SET_PWROUT_PERCENTAGE 221 +#define WLC_SET_BAD_FRAME_PREEMPT 222 +#define WLC_GET_BAD_FRAME_PREEMPT 223 +#define WLC_SET_LEAP_LIST 224 +#define WLC_GET_LEAP_LIST 225 +#define WLC_GET_CWMIN 226 +#define WLC_SET_CWMIN 227 +#define WLC_GET_CWMAX 228 +#define WLC_SET_CWMAX 229 +#define WLC_GET_WET 230 +#define WLC_SET_WET 231 +#define WLC_GET_KEY_PRIMARY 235 +#define WLC_SET_KEY_PRIMARY 236 +#define WLC_SCAN_WITH_CALLBACK 240 +#define WLC_WDS_GET_REMOTE_HWADDR 246 /* currently handled in wl_linux.c/wl_vx.c */ +#define WLC_SET_CS_SCAN_TIMER 248 +#define WLC_GET_CS_SCAN_TIMER 249 +#define WLC_CURRENT_PWR 256 +#define WLC_GET_CHANNELS_IN_COUNTRY 260 +#define WLC_GET_COUNTRY_LIST 261 +#define WLC_GET_VAR 262 /* get value of named variable */ +#define WLC_SET_VAR 263 /* set named variable to value */ +#define WLC_NVRAM_GET 264 +#define WLC_NVRAM_SET 265 +#define WLC_SET_WSEC_PMK 268 +#define WLC_GET_AUTH_MODE 269 +#define WLC_SET_AUTH_MODE 270 +#define WLC_LAST 273 /* do not change - use get_var/set_var */ + +/* + * Minor kludge alert: + * Duplicate a few definitions that irelay requires from epiioctl.h here + * so caller doesn't have to include this file and epiioctl.h . + * If this grows any more, it would be time to move these irelay-specific + * definitions out of the epiioctl.h and into a separate driver common file. + */ +#ifndef EPICTRL_COOKIE +#define EPICTRL_COOKIE 0xABADCEDE +#endif + +/* vx wlc ioctl's offset */ +#define CMN_IOCTL_OFF 0x180 + +/* + * custom OID support + * + * 0xFF - implementation specific OID + * 0xE4 - first byte of Broadcom PCI vendor ID + * 0x14 - second byte of Broadcom PCI vendor ID + * 0xXX - the custom OID number + */ + +/* begin 0x1f values beyond the start of the ET driver range. */ +#define WL_OID_BASE 0xFFE41420 + +/* NDIS overrides */ +#define OID_WL_GETINSTANCE (WL_OID_BASE + WLC_GET_INSTANCE) +#define OID_WL_GET_FORCELINK (WL_OID_BASE + WLC_GET_FORCELINK) +#define OID_WL_SET_FORCELINK (WL_OID_BASE + WLC_SET_FORCELINK) +#define OID_WL_ENCRYPT_STRENGTH (WL_OID_BASE + WLC_ENCRYPT_STRENGTH) +#define OID_WL_DECRYPT_STATUS (WL_OID_BASE + WLC_DECRYPT_STATUS) + +#define WL_DECRYPT_STATUS_SUCCESS 1 +#define WL_DECRYPT_STATUS_FAILURE 2 +#define WL_DECRYPT_STATUS_UNKNOWN 3 + +/* allows user-mode app to poll the status of USB image upgrade */ +#define WLC_UPGRADE_SUCCESS 0 +#define WLC_UPGRADE_PENDING 1 + +/* Bit masks for radio disabled status - returned by WL_GET_RADIO */ +#define WL_RADIO_SW_DISABLE (1<<0) +#define WL_RADIO_HW_DISABLE (1<<1) + +/* Override bit for WLC_SET_TXPWR. if set, ignore other level limits */ +#define WL_TXPWR_OVERRIDE (1<<31) + + +/* Bus types */ +#define WL_SB_BUS 0 /* Silicon Backplane */ +#define WL_PCI_BUS 1 /* PCI target */ +#define WL_PCMCIA_BUS 2 /* PCMCIA target */ + +/* band types */ +#define WLC_BAND_AUTO 0 /* auto-select */ +#define WLC_BAND_A 1 /* "a" band (5 Ghz) */ +#define WLC_BAND_B 2 /* "b" band (2.4 Ghz) */ + +/* MAC list modes */ +#define WLC_MACMODE_DISABLED 0 /* MAC list disabled */ +#define WLC_MACMODE_DENY 1 /* Deny specified (i.e. allow unspecified) */ +#define WLC_MACMODE_ALLOW 2 /* Allow specified (i.e. deny unspecified) */ + + +/* 54g modes (basic bits may still be overridden) */ +#define GMODE_LEGACY_B 0 /* Rateset: 1b, 2b, 5.5, 11 */ + /* Preamble: Long */ + /* Shortslot: Off */ +#define GMODE_AUTO 1 /* Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54 */ + /* Extended Rateset: 6, 9, 12, 48 */ + /* Preamble: Long */ + /* Shortslot: Auto */ +#define GMODE_ONLY 2 /* Rateset: 1b, 2b, 5.5b, 11b, 18, 24b, 36, 54 */ + /* Extended Rateset: 6b, 9, 12b, 48 */ + /* Preamble: Short required */ + /* Shortslot: Auto */ +#define GMODE_B_DEFERRED 3 /* Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54 */ + /* Extended Rateset: 6, 9, 12, 48 */ + /* Preamble: Long */ + /* Shortslot: On */ +#define GMODE_PERFORMANCE 4 /* Rateset: 1b, 2b, 5.5b, 6b, 9, 11b, 12b, 18, 24b, 36, 48, 54 */ + /* Preamble: Short required */ + /* Shortslot: On and required */ +#define GMODE_LRS 5 /* Rateset: 1b, 2b, 5.5b, 11b */ + /* Extended Rateset: 6, 9, 12, 18, 24, 36, 48, 54 */ + /* Preamble: Long */ + /* Shortslot: Auto */ +#define GMODE_MAX 6 + + +/* values for PLCPHdr_override */ +#define WLC_PLCP_AUTO -1 +#define WLC_PLCP_SHORT 0 +#define WLC_PLCP_LONG 1 + +/* values for g_protection_override */ +#define WLC_G_PROTECTION_AUTO -1 +#define WLC_G_PROTECTION_OFF 0 +#define WLC_G_PROTECTION_ON 1 + +/* values for g_protection_control */ +#define WLC_G_PROTECTION_CTL_OFF 0 +#define WLC_G_PROTECTION_CTL_LOCAL 1 +#define WLC_G_PROTECTION_CTL_OVERLAP 2 + +/* Values for PM */ +#define PM_OFF 0 +#define PM_MAX 1 +#define PM_FAST 2 + +/* interference mitigation options */ +#define INTERFERE_NONE 0 /* off */ +#define NON_WLAN 1 /* foreign/non 802.11 interference, no auto detect */ +#define WLAN_MANUAL 2 /* ACI: no auto detection */ +#define WLAN_AUTO 3 /* ACI: auto - detact */ + +/* Message levels */ +#define WL_ERROR_VAL 0x0001 +#define WL_TRACE_VAL 0x0002 +#define WL_PRHDRS_VAL 0x0004 +#define WL_PRPKT_VAL 0x0008 +#define WL_INFORM_VAL 0x0010 +#define WL_TMP_VAL 0x0020 +#define WL_OID_VAL 0x0040 +#define WL_RATE_VAL 0x0080 +#define WL_ASSOC_VAL 0x0100 +#define WL_PRUSR_VAL 0x0200 +#define WL_PS_VAL 0x0400 +#define WL_TXPWR_VAL 0x0800 +#define WL_GMODE_VAL 0x1000 +#define WL_DUAL_VAL 0x2000 +#define WL_WSEC_VAL 0x4000 +#define WL_WSEC_DUMP_VAL 0x8000 +#define WL_LOG_VAL 0x10000 +#define WL_NRSSI_VAL 0x20000 +#define WL_LOFT_VAL 0x40000 +#define WL_REGULATORY_VAL 0x80000 +#define WL_ACI_VAL 0x100000 + + +/* 802.11h enforcement levels */ +#define SPECT_MNGMT_OFF 0 /* 11h disabled */ +#define SPECT_MNGMT_LOOSE 1 /* Allow scan lists to contain non-11h AP */ + /* when 11h is enabled */ +#define SPECT_MNGMT_STRICT 2 /* Prine out non-11h APs from scan list */ + + + +/* max # of leds supported by GPIO (gpio pin# == led index#) */ +#define WL_LED_NUMGPIO 16 /* gpio 0-15 */ + +/* led per-pin behaviors */ +#define WL_LED_OFF 0 /* always off */ +#define WL_LED_ON 1 /* always on */ +#define WL_LED_ACTIVITY 2 /* activity */ +#define WL_LED_RADIO 3 /* radio enabled */ +#define WL_LED_ARADIO 4 /* 5 Ghz radio enabled */ +#define WL_LED_BRADIO 5 /* 2.4Ghz radio enabled */ +#define WL_LED_BGMODE 6 /* on if gmode, off if bmode */ +#define WL_LED_WI1 7 +#define WL_LED_WI2 8 +#define WL_LED_WI3 9 +#define WL_LED_ASSOC 10 /* associated state indicator */ +#define WL_LED_INACTIVE 11 /* null behavior (clears default behavior) */ +#define WL_LED_NUMBEHAVIOR 12 + +/* led behavior numeric value format */ +#define WL_LED_BEH_MASK 0x7f /* behavior mask */ +#define WL_LED_AL_MASK 0x80 /* activelow (polarity) bit */ + + +/* maximum channels */ +#define WL_NUMCHANNELS 64 /* max # of channels in the band */ + +/* rate check */ +#define WL_RATE_OFDM(r) (((r) & 0x7f) == 12 || ((r) & 0x7f) == 18 || \ + ((r) & 0x7f) == 24 || ((r) & 0x7f) == 36 || \ + ((r) & 0x7f) == 48 || ((r) & 0x7f) == 72 || \ + ((r) & 0x7f) == 96 || ((r) & 0x7f) == 108) + +/* WDS link local endpoint WPA role */ +#define WL_WDS_WPA_ROLE_AUTH 0 /* authenticator */ +#define WL_WDS_WPA_ROLE_SUP 1 /* supplicant */ +#define WL_WDS_WPA_ROLE_AUTO 255 /* auto, based on mac addr value */ + +/* afterburner_override */ +#define ABO_AUTO -1 /* auto - no override */ +#define ABO_OFF 0 /* force afterburner off */ +#define ABO_ON 1 /* force afterburner on */ + +#define GMODE_AFTERBURNER 6 + +#undef PACKED + +#endif /* _wlioctl_h_ */ |