diff options
Diffstat (limited to 'package/base-files/brcm')
| -rwxr-xr-x | package/base-files/brcm/bin/firstboot | 128 | ||||
| -rw-r--r-- | package/base-files/brcm/etc/diag.sh | 28 | ||||
| -rwxr-xr-x | package/base-files/brcm/etc/init.d/done | 15 | ||||
| -rwxr-xr-x | package/base-files/brcm/etc/init.d/netconfig | 98 | ||||
| -rwxr-xr-x | package/base-files/brcm/etc/preinit | 74 | ||||
| -rwxr-xr-x | package/base-files/brcm/sbin/hotplug.failsafe | 4 | ||||
| -rwxr-xr-x | package/base-files/brcm/sbin/mount_root | 31 |
7 files changed, 0 insertions, 378 deletions
diff --git a/package/base-files/brcm/bin/firstboot b/package/base-files/brcm/bin/firstboot deleted file mode 100755 index c3d9a64..0000000 --- a/package/base-files/brcm/bin/firstboot +++ /dev/null @@ -1,128 +0,0 @@ -#!/bin/sh -# $Id$ -. /etc/functions.sh - -partname="OpenWrt" -mtdpart="$(find_mtd_part $partname)" - -rom=$(awk '/squashfs/ {print $2}' /proc/mounts) -jffs=$(awk '/jffs2/ {print $2}' /proc/mounts) - -dupe() { # <new_root> <old_root> - cd $1 - echo -n "creating directories... " - { - cd $2 - find . -xdev -type d - echo "./dev ./jffs ./mnt ./proc ./tmp" - # xdev skips mounted directories - cd $1 - } | xargs mkdir -p - echo "done" - - echo -n "setting up symlinks... " - for file in $(cd $2; find . -xdev -type f;); do - case "$file" in - ./rom/note) ;; #nothing - ./etc/config*|\ - ./usr/lib/ipkg/info/*) cp -af $2/$file $file;; - *) ln -sf /rom/${file#./*} $file;; - esac - done - for file in $(cd $2; find . -xdev -type l;); do - cp -af $2/${file#./*} $file - done - echo "done" -} - -pivot() { # <new_root> <old_root> - mount -o move /proc $1/proc && \ - pivot_root $1 $1$2 && { - mount -o move $2/dev /dev - mount -o move $2/tmp /tmp - mount -o move $2/jffs /jffs 2>&- - return 0 - } -} - -fopivot() { # <rw_root> <ro_root> <dupe?> - root=$1 - { - mount -t mini_fo -o base=/,sto=$1 $1 /mnt 2>&- && root=/mnt - } || { - [ "$3" = "1" ] && { - mount | grep "on $1 type" 2>&- 1>&- || mount -o bind $1 $1 - dupe $1 $rom - } - } - pivot $root $2 -} - -ramoverlay() { - mkdir -p /tmp/root - fopivot /tmp/root /rom 1 -} - -# invoked as an executable -[ "${0##*/}" = "firstboot" ] && { - - [ -z "$mtdpart" ] && { - echo "MTD partition not found." - exit 1 - } - - [ -z "$rom" ] && { - echo "You do not have a squashfs partition; aborting" - echo "(firstboot cannot be run on jffs2 based firmwares)" - exit 1 - } - - [ "$1" = "switch2jffs" ] && { - mtd erase "$partname" - - # try to avoid fs changing while copying - mount -o remount,ro none / 2>&- - - # copy ramoverlay to jffs2 - mount "$mtdpart" /rom/jffs -t jffs2 - echo -n "copying files ... " - cp -a /tmp/root/* /rom/jffs 2>&- - echo "done" - - # switch back to squashfs (temporarily) - # and park the ramdisk ontop of /tmp/root - pivot /rom /mnt - mount -o move /mnt /tmp/root - - # /jffs is the overlay - # /rom is the readonly - fopivot /jffs /rom - - # try to get rid of /tmp/root - # this will almost always fail - umount /tmp/root 2>&- - - # fs is clean - jffs2root --clean - exit 0 - } - - # script run manually - [ \! -z "$jffs" ] && { - echo "firstboot has already been run" - echo "jffs2 partition is mounted, only resetting files" - grep mini_fo /proc/filesystems >&- - [ $? != 0 ] && { - dupe $jffs $rom - exit 0 - } || { - rm -rf $jffs/* 2>&- - mount -o remount $jffs / 2>&- - exit 0 - } - } - - mtd erase "$partname" - mount "$mtdpart" /jffs -t jffs2 - fopivot /jffs /rom 1 -} diff --git a/package/base-files/brcm/etc/diag.sh b/package/base-files/brcm/etc/diag.sh deleted file mode 100644 index 3b08554..0000000 --- a/package/base-files/brcm/etc/diag.sh +++ /dev/null @@ -1,28 +0,0 @@ -#!/bin/sh -# Copyright (C) 2006 OpenWrt.org - -set_led() { - local led="$1" - local state="$2" - [ -f "/proc/diag/led/$1" ] && echo "$state" > "/proc/diag/led/$1" -} - -set_state() { - case "$1" in - preinit) - set_led dmz 1 - set_led diag 1 - set_led power 0 - ;; - failsafe) - set_led diag f - set_led power f - set_led dmz f - ;; - done) - set_led dmz 0 - set_led diag 0 - set_led power 1 - ;; - esac -} diff --git a/package/base-files/brcm/etc/init.d/done b/package/base-files/brcm/etc/init.d/done deleted file mode 100755 index 0640b61..0000000 --- a/package/base-files/brcm/etc/init.d/done +++ /dev/null @@ -1,15 +0,0 @@ -#!/bin/sh /etc/rc.common -# Copyright (C) 2006 OpenWrt.org - -START=95 -boot() { - [ -d /tmp/root ] && { - lock /tmp/.switch2jffs - firstboot switch2jffs - lock -u /tmp/.switch2jffs - } - - # set leds to normal state - . /etc/diag.sh - set_state done -} diff --git a/package/base-files/brcm/etc/init.d/netconfig b/package/base-files/brcm/etc/init.d/netconfig deleted file mode 100755 index fe39f50..0000000 --- a/package/base-files/brcm/etc/init.d/netconfig +++ /dev/null @@ -1,98 +0,0 @@ -#!/bin/sh /etc/rc.common -# Copyright (C) 2006 OpenWrt.org - -START=05 - -start() { - [ -e /etc/config/network ] && exit 0 - - mkdir -p /etc/config - - ( - if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then - # WGT634u - echo boardtype=wgt634u - else - strings /dev/mtdblock/3 - fi - ) | awk ' - function p(cfgname, name) { - if (c[name] != "") print " option " cfgname " \"" c[name] "\"" - } - - BEGIN { - FS="=" - c["lan_ifname"]="eth0.0" - c["wan_ifname"]="eth0.1" - c["vlan0ports"]="1 2 3 4 5*" - c["vlan1ports"]="0 5" - } - - ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") { - nvram[$1] = $2 - } - - END { - # v1 hardware - if (nvram["boardtype"] == "bcm94710dev") { - # Asus WL-500g - if (nvram["boardnum"] == "asusX") { - c["lan_ifname"]="eth0 eth1" # FIXME - c["wan_ifname"]="" - } - } - if (nvram["boardtype"] == "bcm94710r4") { - # Toshiba WRC-1000 - c["lan_ifname"] = "eth0" - c["wan_ifname"] = "eth1" - } - if (nvram["boardtype"] == "wgt634u") { - c["vlan0ports"] = "0 1 2 3 5*" - c["vlan1ports"] = "4 5" - } - if ((nvram["boardtype"] == "0x0467") || (nvram["boardtype"] == "0x042f")) { - if (nvram["boardnum"] == "45") { - c["vlan0ports"] = "1 2 3 4 5*" - c["vlan1ports"] = "0 5" - } else { - c["vlan0ports"] = "0 1 2 3 5*" - c["vlan1ports"] = "4 5" - } - } - - # WAP54G - if ((nvram["boardnum"] == "2") || \ - (nvram["boardnum"] == "1024")) { - c["lan_ifname"]="eth0" - c["wan_ifname"]="" - } - - print "#### VLAN configuration " - print "config switch eth0" - p("vlan0", "vlan0ports") - p("vlan1", "vlan1ports") - print "" - print "" - print "#### Loopback configuration" - print "config interface loopback" - print " option ifname \"lo\"" - print " option proto static" - print " option ipaddr 127.0.0.1" - print " option netmask 255.0.0.0" - print "" - print "" - print "#### LAN configuration" - print "config interface lan" - print " option type bridge" - p("ifname", "lan_ifname") - print " option proto static" - print " option ipaddr 192.168.1.1" - print " option netmask 255.255.255.0" - print "" - print "" - print "#### WAN configuration" - print "config interface wan" - p("ifname", "wan_ifname") - print " option proto dhcp" - }' > /etc/config/network -} diff --git a/package/base-files/brcm/etc/preinit b/package/base-files/brcm/etc/preinit deleted file mode 100755 index 30aed35..0000000 --- a/package/base-files/brcm/etc/preinit +++ /dev/null @@ -1,74 +0,0 @@ -#!/bin/sh -# Copyright (C) 2006 OpenWrt.org - -. /etc/functions.sh -. /etc/diag.sh - -failsafe() { - lock /tmp/.failsafe - - echo "0 1 2 3 4 5u*" > /proc/switch/eth0/vlan/0/ports - - set_state failsafe - [ -x "/usr/sbin/nvram" ] && { - [ "$(nvram get boot_wait)" != "on" ] && { - nvram set boot_wait=on - nvram commit - } - } - - netmsg 192.168.1.255 "Entering Failsafe!" - telnetd -l /bin/login <> /dev/null 2>&1 - - ash --login - lock -u /tmp/.failsafe -} - -export PATH=/bin:/sbin:/usr/bin:/usr/sbin -mount none /proc -t proc -size=$(awk '/Mem:/ {l=5242880;print((s=$2/2)<l)?$2-l:s}' /proc/meminfo) -mount none /tmp -t tmpfs -o size=$size - -insmod diag -set_state preinit -trap 'FAILSAFE=true' USR1 -echo '/sbin/hotplug.failsafe' > /proc/sys/kernel/hotplug - -ifname=eth0 - -# hardware specific overrides -case "$(cat /proc/diag/model)" in - "Linksys WAP54G V1") ifname=eth1;; - "ASUS WL-HDD") ifname=eth1;; - "ASUS WL-300g") ifname=eth1;; - "ASUS (unknown, BCM4702)") ifname=eth1;; -esac - -insmod switch-core -insmod switch-robo || insmod switch-adm || rmmod switch-core - -ifconfig $ifname 192.168.1.1 netmask 255.255.255.0 broadcast 192.168.1.255 up - -[ -d /proc/switch/eth0 ] && { - echo 1 > /proc/switch/eth0/reset - - # this would be easier if we blasted the message across all ports - # but we don't want packets leaking across interfaces - for port in $(seq 0 4); do { - echo "$port 5u*" > /proc/switch/eth0/vlan/0/ports - netmsg 192.168.1.255 "Press reset now, to enter Failsafe!" - }; done -} || netmsg 192.168.1.255 "Press reset now, to enter Failsafe!" - -sleep 2 - -eval ${FAILSAFE:+failsafe} - -lock -w /tmp/.failsafe -set_state preinit -echo /sbin/hotplug > /proc/sys/kernel/hotplug - -ifconfig $ifname 0.0.0.0 down - -mount_root -exec /sbin/init diff --git a/package/base-files/brcm/sbin/hotplug.failsafe b/package/base-files/brcm/sbin/hotplug.failsafe deleted file mode 100755 index 0544339..0000000 --- a/package/base-files/brcm/sbin/hotplug.failsafe +++ /dev/null @@ -1,4 +0,0 @@ -#!/bin/sh -case "$1" in - button) kill -USR1 1;; -esac diff --git a/package/base-files/brcm/sbin/mount_root b/package/base-files/brcm/sbin/mount_root deleted file mode 100755 index ffa6072..0000000 --- a/package/base-files/brcm/sbin/mount_root +++ /dev/null @@ -1,31 +0,0 @@ -#!/bin/sh -# Copyright (C) 2006 OpenWrt.org - -is_dirty() { - grep Broadcom /proc/cpuinfo >&- || return 1 - OFFSET="$(($(hexdump -v /dev/mtdblock/1 -s 20 -n 2 -e '"%d"')-1))" - return $(hexdump -v /dev/mtdblock/1 -s $OFFSET -n 1 -e '"%d"') -} - -if [ "$1" != "failsafe" ]; then - mtd unlock linux - mount | grep jffs2 >&- - if [ $? = 0 ] ; then - mount -o remount,rw /dev/root / - else - . /bin/firstboot - is_dirty - [ $? != 0 ] && { - echo "switching to jffs2" - mount /dev/mtdblock/4 /jffs -t jffs2 - fopivot /jffs /rom - } || { - echo "jffs2 not ready yet; using ramdisk" - ramoverlay - } - fi -fi - -mkdir -p /dev/pts -mount none /dev/pts -t devpts 2>&- -grep sysfs /proc/filesystems >/dev/null && mount -t sysfs none /sys 2>&- |