summaryrefslogtreecommitdiff
path: root/package/base-files
diff options
context:
space:
mode:
Diffstat (limited to 'package/base-files')
-rwxr-xr-xpackage/base-files/files/bin/config_generate236
1 files changed, 124 insertions, 112 deletions
diff --git a/package/base-files/files/bin/config_generate b/package/base-files/files/bin/config_generate
index ae0d374..78315ff 100755
--- a/package/base-files/files/bin/config_generate
+++ b/package/base-files/files/bin/config_generate
@@ -7,17 +7,17 @@ CFG=/etc/board.json
[ -f $CFG ] || exit 1
generate_static_network() {
- uci -q batch <<EOF
-delete network.loopback
-set network.loopback='interface'
-set network.loopback.ifname='lo'
-set network.loopback.proto='static'
-set network.loopback.ipaddr='127.0.0.1'
-set network.loopback.netmask='255.0.0.0'
-delete network.globals
-set network.globals='globals'
-set network.globals.ula_prefix='auto'
-EOF
+ uci -q batch <<-EOF
+ delete network.loopback
+ set network.loopback='interface'
+ set network.loopback.ifname='lo'
+ set network.loopback.proto='static'
+ set network.loopback.ipaddr='127.0.0.1'
+ set network.loopback.netmask='255.0.0.0'
+ delete network.globals
+ set network.globals='globals'
+ set network.globals.ula_prefix='auto'
+ EOF
}
next_vlan=3
@@ -25,77 +25,84 @@ generate_network() {
local vlan
json_select network
- json_select $1
+ json_select "$1"
json_get_vars ifname create_vlan macaddr
json_select ..
json_select ..
[ -n "$ifname" ] || return
- [ "${create_vlan:-0}" -eq 1 ] && case $1 in
- lan) vlan=1;;
- wan) vlan=2;;
- *)
- vlan=$next_vlan
- next_vlan=$((next_vlan + 1))
- ;;
- esac
+
+ if [ "${create_vlan:-0}" -eq 1 ]; then
+ case "$1" in
+ lan) vlan=1;;
+ wan) vlan=2;;
+ *)
+ vlan=$next_vlan
+ next_vlan=$((next_vlan + 1))
+ ;;
+ esac
+ fi
+
[ -n "$vlan" ] && ifname=${ifname}.${vlan}
- uci -q batch <<EOF
-delete network.$1
-set network.$1='interface'
-set network.$1.ifname='$ifname'
-set network.$1.force_link=1
-set network.$1.proto='none'
-set network.$1.macaddr='$macaddr'
-EOF
-
- case $1 in
- lan) uci -q batch <<EOF
-set network.$1.type='bridge'
-set network.$1.proto='static'
-set network.$1.ipaddr='192.168.1.1'
-set network.$1.netmask='255.255.255.0'
-set network.$1.ip6assign='60'
-EOF
+
+ uci -q batch <<-EOF
+ delete network.$1
+ set network.$1='interface'
+ set network.$1.ifname='$ifname'
+ set network.$1.force_link=1
+ set network.$1.proto='none'
+ set network.$1.macaddr='$macaddr'
+ EOF
+
+ case "$1" in
+ lan)
+ uci -q batch <<-EOF
+ set network.$1.type='bridge'
+ set network.$1.proto='static'
+ set network.$1.ipaddr='192.168.1.1'
+ set network.$1.netmask='255.255.255.0'
+ set network.$1.ip6assign='60'
+ EOF
;;
- wan) uci -q batch <<EOF
-set network.$1.proto='dhcp'
-delete network.wan6
-set network.wan6='interface'
-set network.wan6.ifname='$ifname'
-set network.wan6.proto='dhcpv6'
-EOF
+ wan)
+ uci -q batch <<-EOF
+ set network.$1.proto='dhcp'
+ delete network.wan6
+ set network.wan6='interface'
+ set network.wan6.ifname='$ifname'
+ set network.wan6.proto='dhcpv6'
+ EOF
;;
esac
}
generate_switch_vlan() {
- local device=$1
- local vlan=$2
- local cpu_port=$3
-
- case $vlan in
- lan) vlan=1;;
- wan) vlan=2;;
- *) vlan=${vlan##vlan};;
+ local device="$1"
+ local vlan="$2"
+ local cpu_port="$3"
+
+ case "$vlan" in
+ lan) vlan=1;;
+ wan) vlan=2;;
+ *) vlan="${vlan##vlan}";;
esac
json_select vlans
- json_select $2
+ json_select "$2"
json_get_values ports
json_select ..
json_select ..
- uci -q batch <<EOF
-add network switch_vlan
-set network.@switch_vlan[-1].device='$device'
-set network.@switch_vlan[-1].vlan='$vlan'
-set network.@switch_vlan[-1].ports='$ports ${cpu_port}t'
-EOF
+ uci -q batch <<-EOF
+ add network switch_vlan
+ set network.@switch_vlan[-1].device='$device'
+ set network.@switch_vlan[-1].vlan='$vlan'
+ set network.@switch_vlan[-1].ports='$ports ${cpu_port}t'
+ EOF
}
calculate_switch_vlans() {
- local switch=$1
+ local switch="$1"
local ports port attr val
local prev_role
local num device role index
@@ -204,45 +211,50 @@ calculate_switch_vlans() {
EOF
case $role in
- lan) uci -q batch <<-EOF
- set network.lan.type='bridge'
- set network.lan.proto='static'
- set network.lan.ipaddr='192.168.1.1'
- set network.lan.netmask='255.255.255.0'
- set network.lan.ip6assign='60'
- EOF
+ lan)
+ uci -q batch <<-EOF
+ set network.lan.type='bridge'
+ set network.lan.proto='static'
+ set network.lan.ipaddr='192.168.1.1'
+ set network.lan.netmask='255.255.255.0'
+ set network.lan.ip6assign='60'
+ EOF
;;
- wan) uci -q batch <<-EOF
- set network.wan.proto='dhcp'
- set network.wan6='interface'
- set network.wan6.ifname='$device'
- set network.wan6.proto='dhcpv6'
- EOF
+
+ wan)
+ uci -q batch <<-EOF
+ set network.wan.proto='dhcp'
+ set network.wan6='interface'
+ set network.wan6.ifname='$device'
+ set network.wan6.proto='dhcpv6'
+ EOF
;;
- *) uci -q batch <<-EOF
- set network.$role.force_link='1'
- set network.$role.proto='none'
- EOF
+
+ *)
+ uci -q batch <<-EOF
+ set network.$role.force_link='1'
+ set network.$role.proto='none'
+ EOF
;;
esac
done
}
generate_switch() {
- local key=$1
+ local key="$1"
local vlans
json_select switch
- json_select $key
+ json_select "$key"
json_get_vars enable reset blinkrate cpu_port
- uci -q batch <<EOF
-add network switch
-set network.@switch[-1].name='$key'
-set network.@switch[-1].reset='$reset'
-set network.@switch[-1].enable_vlan='$enable'
-set network.@switch[-1].blinkrate='$blinkrate'
-EOF
+ uci -q batch <<-EOF
+ add network switch
+ set network.@switch[-1].name='$key'
+ set network.@switch[-1].reset='$reset'
+ set network.@switch[-1].enable_vlan='$enable'
+ set network.@switch[-1].blinkrate='$blinkrate'
+ EOF
if [ -n "$cpu_port" ]; then
json_get_keys vlans vlans
@@ -256,40 +268,40 @@ EOF
}
generate_led() {
- local key=$1
+ local key="$1"
local cfg="led_$key"
json_select led
- json_select $key
+ json_select "$key"
json_get_vars name sysfs type trigger device interface default port_mask
json_select ..
json_select ..
- uci -q batch <<EOF
-delete system.$cfg
-set system.$cfg='led'
-set system.$cfg.name='$name'
-set system.$cfg.sysfs='$sysfs'
-set system.$cfg.dev='$device'
-set system.$cfg.trigger='$trigger'
-set system.$cfg.port_mask='$port_mask'
-set system.$cfg.default='$default'
-EOF
- case $type in
- netdev)
- uci -q batch <<EOF
-set system.$cfg.trigger='netdev'
-set system.$cfg.mode='link tx rx'
-EOF
- ;;
-
- usb)
- uci -q batch <<EOF
-set system.$cfg.trigger='usbdev'
-set system.$cfg.interval='50'
-EOF
- ;;
+ uci -q batch <<-EOF
+ delete system.$cfg
+ set system.$cfg='led'
+ set system.$cfg.name='$name'
+ set system.$cfg.sysfs='$sysfs'
+ set system.$cfg.dev='$device'
+ set system.$cfg.trigger='$trigger'
+ set system.$cfg.port_mask='$port_mask'
+ set system.$cfg.default='$default'
+ EOF
+
+ case "$type" in
+ netdev)
+ uci -q batch <<-EOF
+ set system.$cfg.trigger='netdev'
+ set system.$cfg.mode='link tx rx'
+ EOF
+ ;;
+ usb)
+ uci -q batch <<-EOF
+ set system.$cfg.trigger='usbdev'
+ set system.$cfg.interval='50'
+ EOF
+ ;;
esac
}
generated by cgit v1.1 at 2024-11-27 03:25:23 +0000