diff options
Diffstat (limited to 'package/base-files')
| -rwxr-xr-x | package/base-files/files/bin/board_detect | 14 | ||||
| -rwxr-xr-x | package/base-files/files/bin/config_generate | 173 | ||||
| -rwxr-xr-x | package/base-files/files/etc/init.d/boot | 1 | ||||
| -rwxr-xr-x | package/base-files/files/lib/functions/uci-defaults-new.sh | 302 |
4 files changed, 490 insertions, 0 deletions
diff --git a/package/base-files/files/bin/board_detect b/package/base-files/files/bin/board_detect new file mode 100755 index 0000000..ddd17a1 --- /dev/null +++ b/package/base-files/files/bin/board_detect @@ -0,0 +1,14 @@ +#!/bin/sh + +[ -d "/etc/board.d/" -a ! -f "/etc/board.json" ] || { + for a in `ls /etc/board.d/*`; do + [ -x $a ] || continue; + $(. $a) + done +} + +[ -f "/etc/board.json" ] || return 1 +[ -f "/etc/config/network" ] || { + touch /etc/config/network + /bin/config_generate +} diff --git a/package/base-files/files/bin/config_generate b/package/base-files/files/bin/config_generate new file mode 100755 index 0000000..c435e7b --- /dev/null +++ b/package/base-files/files/bin/config_generate @@ -0,0 +1,173 @@ +#!/bin/sh + +CFG=/etc/board.json + +. /usr/share/libubox/jshn.sh + +[ -f $CFG ] || exit 1 + +generate_static_network() { + uci -q batch <<EOF +delete network.loopback +set network.loopback='interface' +set network.loopback.ifname='lo' +set network.loopback.proto='static' +set network.loopback.ipaddr='127.0.0.1' +set network.loopback.netmask='255.0.0.0' +delete network.globals +set network.globals='globals' +set network.globals.ula_prefix='fdb1:a57f:2544::/48' +EOF +} + +next_vlan=3 +generate_network() { + local vlan + + json_select network + json_select $1 + json_get_vars ifname create_vlan macaddr + json_select .. + json_select .. + + [ -n "$ifname" ] || return + [ "$create_vlan" -eq 1 ] && case $1 in + lan) vlan=1;; + wan) vlan=2;; + *) + vlan=$next_vlan + next_vlan=$((next_vlan + 1)) + ;; + esac + [ -n "$vlan" ] && ifname=${ifname}.${vlan} + uci -q batch <<EOF +delete network.$1 +set network.$1='interface' +set network.$1.ifname='$ifname' +set network.$1.force_link=1 +set network.$1.proto='none' +set network.$1.macaddr='$macaddr' +EOF + + case $1 in + lan) uci -q batch <<EOF +set network.$1.type='bridge' +set network.$1.proto='static' +set network.$1.ipaddr='192.168.1.1' +set network.$1.netmask='255.255.255.0' +set network.$1.ip6assign='60' +EOF + ;; + wan) uci -q batch <<EOF +set network.$1.proto='dhcp' +delete network.wan6 +set network.wan6='interface' +set network.wan6.ifname='@wan6' +set network.wan6.proto='dhcpv6' +EOF + ;; + esac +} + +generate_switch_vlan() { + local device=$1 + local vlan=$2 + local cpu_port=$3 + + case $vlan in + lan) vlan=1;; + wan) vlan=2;; + *) vlan=${vlan##vlan};; + esac + + json_select vlans + json_select $2 + json_get_values ports + json_select .. + json_select .. + + uci -q batch <<EOF +add network switch_vlan +set network.@switch_vlan[-1].device='$device' +set network.@switch_vlan[-1].vlan='$vlan' +set network.@switch_vlan[-1].ports='$ports ${cpu_port}t' +EOF +} + +generate_switch() { + local key=$1 + local vlans + + json_select switch + json_select $key + json_get_vars enable reset blinkrate cpu_port + + [ -n "$cpu_port" ] || return + + uci -q batch <<EOF +add network switch +set network.@switch[-1].name='$key' +set network.@switch[-1].reset='$reset' +set network.@switch[-1].enable_vlan='$enable' +set network.@switch[-1].blinkrate='$blinkrate' +EOF + + json_get_keys vlans vlans + for vlan in $vlans; do generate_switch_vlan $1 $vlan $cpu_port; done + json_select .. + json_select .. +} + +generate_led() { + local key=$1 + local cfg="led_$key" + + json_select led + json_select $key + json_get_vars name sysfs type trigger device interface default + json_select .. + json_select .. + + uci -q batch <<EOF +delete system.$cfg +set system.$cfg='led' +set system.$cfg.name='$name' +set system.$cfg.sysfs='$sysfs' +set system.$cfg.dev='$device' +set system.$cfg.trigger='$trigger' +set system.$cfg.port_mask='$port_mask' +set system.$cfg.default='$default' +EOF + case $type in + netdev) + uci -q batch <<EOF +set system.$cfg.trigger='netdev' +set system.$cfg.mode='link tx rx' +EOF + ;; + + usb) + uci -q batch <<EOF +set system.$cfg.trigger='usbdev' +set system.$cfg.interval='50' +EOF + ;; + + esac +} + +json_init +json_load "$(cat ${CFG})" + +generate_static_network + +json_get_keys keys network +for key in $keys; do generate_network $key; done + +json_get_keys keys switch +for key in $keys; do generate_switch $key; done + +json_get_keys keys led +for key in $keys; do generate_led $key; done + +uci commit diff --git a/package/base-files/files/etc/init.d/boot b/package/base-files/files/etc/init.d/boot index b1272f4..f10db13 100755 --- a/package/base-files/files/etc/init.d/boot +++ b/package/base-files/files/etc/init.d/boot @@ -46,6 +46,7 @@ boot() { } rm -f /tmp/wireless.tmp + /bin/board_detect uci_apply_defaults # temporary hack until configd exists diff --git a/package/base-files/files/lib/functions/uci-defaults-new.sh b/package/base-files/files/lib/functions/uci-defaults-new.sh new file mode 100755 index 0000000..528835b --- /dev/null +++ b/package/base-files/files/lib/functions/uci-defaults-new.sh @@ -0,0 +1,302 @@ +#!/bin/ash + +CFG=/etc/board.json + +. /usr/share/libubox/jshn.sh + +json_select_array() { + local _json_no_warning=1 + + json_select "$1" + [ $? = 0 ] && return + + json_add_array $1 + json_close_array + + json_select "$1" +} + +json_select_object() { + local _json_no_warning=1 + + json_select "$1" + [ $? = 0 ] && return + + json_add_object $1 + json_close_object + + json_select "$1" +} + +_ucidef_set_interface() { + local name=$1 + local iface=$2 + + json_select_object $name + json_add_string ifname "${iface%%.*}" + [ "$iface" == "${iface%%.*}" ] || json_add_boolean create_vlan 1 + json_select .. +} + +ucidef_set_interface_loopback() +{ + # stub + local a=$1 +} + +ucidef_set_interface_lan() { + local lan_if=$1 + + json_select_object network + _ucidef_set_interface lan $lan_if + json_select .. +} + +ucidef_set_interfaces_lan_wan() { + local lan_if=$1 + local wan_if=$2 + + json_select_object network + _ucidef_set_interface lan $lan_if + _ucidef_set_interface wan $wan_if + json_select .. +} + +ucidef_add_switch() { + local name=$1 + local reset=$2 + local enable=$3 + + json_select_object switch + + json_select_object $name + [ "$enable" -eq 1 ] && json_add_boolean enable 1 + [ "$reset" -eq 1 ] && json_add_boolean reset 1 + json_select .. + + json_select .. +} + +ucidef_add_switch_attr() { + local name=$1 + local key=$2 + local val=$3 + + json_select_object switch + + json_select_object $name + json_add_string $key $val + json_select .. + + json_select .. +} + +ucidef_add_switch_vlan() { + local name=$1 + local vlan=$2 + local ports=$3 + local cpu_port='' + + case $vlan in + 1) vlan=lan;; + 2) vlan=wan;; + *) vlan=vlan$vlan;; + esac + + json_select_object switch + json_select_object $name + json_select_object vlans + + json_add_array $vlan + for p in $ports; do + if [ ${p%t} != $p ]; then + cpu_port=$p + else + json_add_int "" $p + fi + done + json_close_array + + json_select .. + [ -n "$cpu_port" ] && json_add_int cpu_port $cpu_port + json_select .. + json_select .. +} + +ucidef_set_interface_macaddr() { + local network=$1 + local macaddr=$2 + + json_select_object network + + json_select $network + [ $? -eq 0 ] || { + json_select .. + return + } + + json_add_string macaddr $macaddr + json_select .. + + json_select .. +} + +ucidef_set_led_netdev() { + local cfg="led_$1" + local name=$2 + local sysfs=$3 + local dev=$4 + + json_select_object led + + json_select_object $1 + json_add_string name $name + json_add_string type netdev + json_add_string sysfs $sysfs + json_add_string device $dev + json_select .. + + json_select .. +} + +ucidef_set_led_interface() { + local name=$1 + local sysfs=$2 + + json_select_object led + + json_select_object $1 + json_add_string name $name + json_add_string type interface + json_add_string sysfs $sysfs + json_add_string interface $name + json_select .. + + json_select .. +} + +ucidef_set_led_usbdev() { + local cfg="led_$1" + local name=$2 + local sysfs=$3 + local dev=$4 + + json_select_object led + + json_select_object $1 + json_add_string name $name + json_add_string type usb + json_add_string sysfs $sysfs + json_add_string device $dev + json_select .. + + json_select .. +} + +ucidef_set_led_wlan() { + local cfg="led_$1" + local name=$2 + local sysfs=$3 + local trigger=$4 + + json_select_object led + + json_select_object $1 + json_add_string name $name + json_add_string type trigger + json_add_string sysfs $sysfs + json_add_string trigger $trigger + json_select .. + + json_select .. +} + +ucidef_set_led_switch() { + local cfg="led_$1" + local name=$2 + local sysfs=$3 + local trigger=$4 + local port_mask=$5 + + json_select_object led + + json_select_object $1 + json_add_string name $name + json_add_string type switch + json_add_string sysfs $sysfs + json_add_string trigger $trigger + json_add_string port_mask $port_mask + json_select .. + + json_select .. +} + +ucidef_set_led_default() { + local cfg="led_$1" + local name=$2 + local sysfs=$3 + local default=$4 + + json_select_object led + + json_select_object $1 + json_add_string name $name + json_add_string sysfs $sysfs + json_add_string default $default + json_select .. + + json_select .. +} + +ucidef_set_led_rssi() { + local cfg="led_$1" + local name=$2 + local sysfs=$3 + local iface=$4 + local minq=$5 + local maxq=$6 + local offset=$7 + local factor=$8 + + json_select_object led + + json_select_object rssi + json_select_object $1 + json_add_string name $name + json_add_string sysfs $sysfs + json_add_string minq $minq + json_add_string maxq $maxq + json_add_string offset $offset + json_add_string factor $factor + json_select .. + json_select .. + + json_select .. +} + +ucidef_set_rssimon() { + local dev="$1" + local refresh="$2" + local threshold="$3" + + json_select_object led + + json_select_object rssi + json_add_string type rssi + json_add_string dev $dev + json_add_string threshold $threshold + json_select .. + + json_select .. + +} + +board_config_update() { + json_init + [ -f ${CFG} ] && json_load "$(cat ${CFG})" +} + +board_config_flush() { + json_dump -i > /tmp/.board.json + mv /tmp/.board.json ${CFG} +} |