diff options
Diffstat (limited to 'package/boot/uboot-kirkwood/patches/0001-cosmetic-kirkwood-style-fixes-in-kwbimage.cfg-files.patch')
| -rw-r--r-- | package/boot/uboot-kirkwood/patches/0001-cosmetic-kirkwood-style-fixes-in-kwbimage.cfg-files.patch | 96 |
1 files changed, 96 insertions, 0 deletions
diff --git a/package/boot/uboot-kirkwood/patches/0001-cosmetic-kirkwood-style-fixes-in-kwbimage.cfg-files.patch b/package/boot/uboot-kirkwood/patches/0001-cosmetic-kirkwood-style-fixes-in-kwbimage.cfg-files.patch new file mode 100644 index 0000000..5abdad9 --- /dev/null +++ b/package/boot/uboot-kirkwood/patches/0001-cosmetic-kirkwood-style-fixes-in-kwbimage.cfg-files.patch @@ -0,0 +1,96 @@ +From 76a9fed9e5580945827a82963ac7315186fd0ebe Mon Sep 17 00:00:00 2001 +From: Luka Perkov <luka@openwrt.org> +Date: Mon, 11 Nov 2013 06:45:44 +0100 +Subject: [PATCH 1/9] cosmetic: kirkwood: style fixes in kwbimage.cfg files + +When diffing through the changes only the relevant changes +should be displayed. + +Signed-off-by: Luka Perkov <luka@openwrt.org> +--- + board/iomega/iconnect/kwbimage.cfg | 4 ++-- + board/raidsonic/ib62x0/kwbimage.cfg | 22 +++++++++++----------- + 2 files changed, 13 insertions(+), 13 deletions(-) + +--- a/board/iomega/iconnect/kwbimage.cfg ++++ b/board/iomega/iconnect/kwbimage.cfg +@@ -20,7 +20,7 @@ NAND_PAGE_SIZE 0x0800 + # Configure RGMII-0 interface pad voltage to 1.8V + DATA 0xffd100e0 0x1b1b1b9b + +-#Dram initalization for SINGLE x16 CL=5 @ 400MHz ++# Dram initalization for SINGLE x16 CL=5 @ 400MHz + DATA 0xffd01400 0x43000c30 # DDR Configuration register + # bit13-0: 0xc30, (3120 DDR2 clks refresh rate) + # bit23-14: 0x0, +@@ -87,7 +87,7 @@ DATA 0xffd0141c 0x00000c52 # DDR Mode + # bit6-4: 0x4, CL=5 + # bit7: 0x0, TestMode=0 normal + # bit8: 0x0, DLL reset=0 normal +-# bit11-9: 0x6, auto-precharge write recovery ???????????? ++# bit11-9: 0x6, auto-precharge write recovery + # bit12: 0x0, PD must be zero + # bit31-13: 0x0, required + +--- a/board/raidsonic/ib62x0/kwbimage.cfg ++++ b/board/raidsonic/ib62x0/kwbimage.cfg +@@ -11,7 +11,7 @@ + # + + # Boot Media configurations +-BOOT_FROM nand # change from nand to uart if building UART image ++BOOT_FROM nand + NAND_ECC_MODE default + NAND_PAGE_SIZE 0x0800 + +@@ -21,12 +21,12 @@ NAND_PAGE_SIZE 0x0800 + # Configure RGMII-0 interface pad voltage to 1.8V + DATA 0xffd100e0 0x1b1b1b9b + +-#Dram initalization for SINGLE x16 CL=5 @ 400MHz ++# Dram initalization for SINGLE x16 CL=5 @ 400MHz + DATA 0xffd01400 0x43000c30 # DDR Configuration register + # bit13-0: 0xc30, (3120 DDR2 clks refresh rate) + # bit23-14: 0x0, +-# bit24: 0x1, enable exit self refresh mode on DDR access +-# bit25: 0x1, required ++# bit24: 0x1, enable exit self refresh mode on DDR access ++# bit25: 0x1, required + # bit29-26: 0x0, + # bit31-30: 0x1, + +@@ -64,10 +64,10 @@ DATA 0xffd01410 0x0000000c # DDR Address + # bit3-2: 11, Cs0size (1Gb) + # bit5-4: 00, Cs1width (x8) + # bit7-6: 11, Cs1size (1Gb) +-# bit9-8: 00, Cs2width (nonexistent +-# bit11-10: 00, Cs2size (nonexistent +-# bit13-12: 00, Cs3width (nonexistent +-# bit15-14: 00, Cs3size (nonexistent ++# bit9-8: 00, Cs2width (nonexistent) ++# bit11-10: 00, Cs2size (nonexistent) ++# bit13-12: 00, Cs3width (nonexistent) ++# bit15-14: 00, Cs3size (nonexistent) + # bit16: 0, Cs0AddrSel + # bit17: 0, Cs1AddrSel + # bit18: 0, Cs2AddrSel +@@ -88,7 +88,7 @@ DATA 0xffd0141c 0x00000c52 # DDR Mode + # bit6-4: 0x4, CL=5 + # bit7: 0x0, TestMode=0 normal + # bit8: 0x0, DLL reset=0 normal +-# bit11-9: 0x6, auto-precharge write recovery ???????????? ++# bit11-9: 0x6, auto-precharge write recovery + # bit12: 0x0, PD must be zero + # bit31-13: 0x0, required + +@@ -148,8 +148,8 @@ DATA 0xffd0149c 0x0000e803 # CPU ODT Con + DATA 0xffd01480 0x00000001 # DDR Initialization Control + # bit0: 0x1, enable DDR init upon this register write + +-DATA 0xFFD20134 0x66666666 # L2 RAM Timing 0 Register +-DATA 0xFFD20138 0x66666666 # L2 RAM Timing 1 Register ++DATA 0xffd20134 0x66666666 # L2 RAM Timing 0 Register ++DATA 0xffd20138 0x66666666 # L2 RAM Timing 1 Register + + # End of Header extension + DATA 0x0 0x0 |