diff options
Diffstat (limited to 'package/boot/uboot-kirkwood/patches/0001-ib62x0.patch')
| -rw-r--r-- | package/boot/uboot-kirkwood/patches/0001-ib62x0.patch | 542 |
1 files changed, 542 insertions, 0 deletions
diff --git a/package/boot/uboot-kirkwood/patches/0001-ib62x0.patch b/package/boot/uboot-kirkwood/patches/0001-ib62x0.patch new file mode 100644 index 0000000..0a7dc47 --- /dev/null +++ b/package/boot/uboot-kirkwood/patches/0001-ib62x0.patch @@ -0,0 +1,542 @@ +http://lists.denx.de/pipermail/u-boot/2012-April/122597.html +http://patchwork.ozlabs.org/patch/153293/ +--- + +diff --git a/MAINTAINERS b/MAINTAINERS +index 708ded7..9d2aba7 100644 +--- a/MAINTAINERS ++++ b/MAINTAINERS +@@ -777,6 +777,10 @@ Linus Walleij <linus.walleij@linaro.org> + integratorap various + integratorcp various + ++Luka Perkov <uboot@lukaperkov.net> ++ ++ ib62x0 ARM926EJS ++ + Dave Peverley <dpeverley@mpc-data.co.uk> + + omap730p2 ARM926EJS +diff --git a/board/raidsonic/ib62x0/Makefile b/board/raidsonic/ib62x0/Makefile +new file mode 100644 +index 0000000..d450f8d +--- /dev/null ++++ b/board/raidsonic/ib62x0/Makefile +@@ -0,0 +1,43 @@ ++# ++# (C) Copyright 2009 ++# Marvell Semiconductor <www.marvell.com> ++# Written-by: Prafulla Wadaskar <prafulla@marvell.com> ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program. If not, see <http://www.gnu.org/licenses/>. ++# ++ ++include $(TOPDIR)/config.mk ++ ++LIB = $(obj)lib$(BOARD).o ++ ++COBJS := ib62x0.o ++ ++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) ++OBJS := $(addprefix $(obj),$(COBJS)) ++SOBJS := $(addprefix $(obj),$(SOBJS)) ++ ++$(LIB): $(obj).depend $(OBJS) $(SOBJS) ++ $(call cmd_link_o_target, $(OBJS) $(SOBJS)) ++ ++######################################################################### ++ ++# defines $(obj).depend target ++include $(SRCTREE)/rules.mk ++ ++sinclude $(obj).depend ++ ++######################################################################### +diff --git a/board/raidsonic/ib62x0/ib62x0.c b/board/raidsonic/ib62x0/ib62x0.c +new file mode 100644 +index 0000000..65f2c2e +--- /dev/null ++++ b/board/raidsonic/ib62x0/ib62x0.c +@@ -0,0 +1,79 @@ ++/* ++ * Copyright (C) 2011-2012 ++ * Gerald Kerma <dreagle@doukki.net> ++ * Luka Perkov <uboot@lukaperkov.net> ++ * Simon Baatz <gmbnomis@gmail.com> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#include <common.h> ++#include <miiphy.h> ++#include <asm/arch/cpu.h> ++#include <asm/arch/kirkwood.h> ++#include <asm/arch/mpp.h> ++#include "ib62x0.h" ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++int board_early_init_f(void) ++{ ++ /* ++ * default gpio configuration ++ * There are maximum 64 gpios controlled through 2 sets of registers ++ * the below configuration configures mainly initial LED status ++ */ ++ kw_config_gpio(IB62x0_OE_VAL_LOW, ++ IB62x0_OE_VAL_HIGH, ++ IB62x0_OE_LOW, IB62x0_OE_HIGH); ++ ++ /* Multi-Purpose Pins Functionality configuration */ ++ u32 kwmpp_config[] = { ++ MPP0_NF_IO2, ++ MPP1_NF_IO3, ++ MPP2_NF_IO4, ++ MPP3_NF_IO5, ++ MPP4_NF_IO6, ++ MPP5_NF_IO7, ++ MPP6_SYSRST_OUTn, ++ MPP8_TW_SDA, ++ MPP9_TW_SCK, ++ MPP10_UART0_TXD, ++ MPP11_UART0_RXD, ++ MPP18_NF_IO0, ++ MPP19_NF_IO1, ++ MPP20_SATA1_ACTn, ++ MPP21_SATA0_ACTn, ++ MPP22_GPIO, /* Power LED red */ ++ MPP24_GPIO, /* Power off device */ ++ MPP25_GPIO, /* Power LED green */ ++ MPP27_GPIO, /* USB transfer LED */ ++ MPP28_GPIO, /* Reset button */ ++ MPP29_GPIO, /* USB Copy button */ ++ 0 ++ }; ++ kirkwood_mpp_conf(kwmpp_config); ++ return 0; ++} ++ ++int board_init(void) ++{ ++ /* adress of boot parameters */ ++ gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100; ++ ++ return 0; ++} +diff --git a/board/raidsonic/ib62x0/ib62x0.h b/board/raidsonic/ib62x0/ib62x0.h +new file mode 100644 +index 0000000..0c30690 +--- /dev/null ++++ b/board/raidsonic/ib62x0/ib62x0.h +@@ -0,0 +1,40 @@ ++/* ++ * Copyright (C) 2011-2012 ++ * Gerald Kerma <dreagle@doukki.net> ++ * Simon Baatz <gmbnomis@gmail.com> ++ * Luka Perkov <uboot@lukaperkov.net> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#ifndef __IB62x0_H ++#define __IB62x0_H ++ ++#define IB62x0_OE_LOW (~(1 << 22 | 1 << 24 | 1 << 25 | 1 << 27)) ++#define IB62x0_OE_HIGH (~(0)) ++#define IB62x0_OE_VAL_LOW 0 ++#define IB62x0_OE_VAL_HIGH 0 ++ ++/* PHY related */ ++#define MV88E1116_LED_FCTRL_REG 10 ++#define MV88E1116_CPRSP_CR3_REG 21 ++#define MV88E1116_MAC_CTRL_REG 21 ++#define MV88E1116_PGADR_REG 22 ++#define MV88E1116_RGMII_TXTM_CTRL (1 << 4) ++#define MV88E1116_RGMII_RXTM_CTRL (1 << 5) ++ ++#endif /* __IB62x0_H */ +diff --git a/board/raidsonic/ib62x0/kwbimage.cfg b/board/raidsonic/ib62x0/kwbimage.cfg +new file mode 100644 +index 0000000..bd594eb +--- /dev/null ++++ b/board/raidsonic/ib62x0/kwbimage.cfg +@@ -0,0 +1,169 @@ ++# ++# Copyright (C) 2011-2012 ++# Gerald Kerma <dreagle@doukki.net> ++# Simon Baatz <gmbnomis@gmail.com> ++# Luka Perkov <uboot@lukaperkov.net> ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program. If not, see <http://www.gnu.org/licenses/>. ++# ++# Refer docs/README.kwimage for more details about how-to configure ++# and create kirkwood boot image ++# ++ ++# Boot Media configurations ++BOOT_FROM nand # change from nand to uart if building UART image ++NAND_ECC_MODE default ++NAND_PAGE_SIZE 0x0800 ++ ++# SOC registers configuration using bootrom header extension ++# Maximum KWBIMAGE_MAX_CONFIG configurations allowed ++ ++# Configure RGMII-0 interface pad voltage to 1.8V ++DATA 0xffd100e0 0x1b1b1b9b ++ ++#Dram initalization for SINGLE x16 CL=5 @ 400MHz ++DATA 0xffd01400 0x43000c30 # DDR Configuration register ++# bit13-0: 0xc30, (3120 DDR2 clks refresh rate) ++# bit23-14: 0x0, ++# bit24: 0x1, enable exit self refresh mode on DDR access ++# bit25: 0x1, required ++# bit29-26: 0x0, ++# bit31-30: 0x1, ++ ++DATA 0xffd01404 0x37543000 # DDR Controller Control Low ++# bit4: 0x0, addr/cmd in smame cycle ++# bit5: 0x0, clk is driven during self refresh, we don't care for APX ++# bit6: 0x0, use recommended falling edge of clk for addr/cmd ++# bit14: 0x0, input buffer always powered up ++# bit18: 0x1, cpu lock transaction enabled ++# bit23-20: 0x5, recommended value for CL=5 and STARTBURST_DEL disabled bit31=0 ++# bit27-24: 0x7, CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM ++# bit30-28: 0x3, required ++# bit31: 0x0, no additional STARTBURST delay ++ ++DATA 0xffd01408 0x22125451 # DDR Timing (Low) (active cycles value +1) ++# bit3-0: TRAS lsbs ++# bit7-4: TRCD ++# bit11-8: TRP ++# bit15-12: TWR ++# bit19-16: TWTR ++# bit20: TRAS msb ++# bit23-21: 0x0 ++# bit27-24: TRRD ++# bit31-28: TRTP ++ ++DATA 0xffd0140c 0x00000a33 # DDR Timing (High) ++# bit6-0: TRFC ++# bit8-7: TR2R ++# bit10-9: TR2W ++# bit12-11: TW2W ++# bit31-13: 0x0, required ++ ++DATA 0xffd01410 0x0000000c # DDR Address Control ++# bit1-0: 00, Cs0width (x8) ++# bit3-2: 11, Cs0size (1Gb) ++# bit5-4: 00, Cs1width (x8) ++# bit7-6: 11, Cs1size (1Gb) ++# bit9-8: 00, Cs2width (nonexistent ++# bit11-10: 00, Cs2size (nonexistent ++# bit13-12: 00, Cs3width (nonexistent ++# bit15-14: 00, Cs3size (nonexistent ++# bit16: 0, Cs0AddrSel ++# bit17: 0, Cs1AddrSel ++# bit18: 0, Cs2AddrSel ++# bit19: 0, Cs3AddrSel ++# bit31-20: 0x0, required ++ ++DATA 0xffd01414 0x00000000 # DDR Open Pages Control ++# bit0: 0, OpenPage enabled ++# bit31-1: 0x0, required ++ ++DATA 0xffd01418 0x00000000 # DDR Operation ++# bit3-0: 0x0, DDR cmd ++# bit31-4: 0x0, required ++ ++DATA 0xffd0141c 0x00000c52 # DDR Mode ++# bit2-0: 0x2, BurstLen=2 required ++# bit3: 0x0, BurstType=0 required ++# bit6-4: 0x4, CL=5 ++# bit7: 0x0, TestMode=0 normal ++# bit8: 0x0, DLL reset=0 normal ++# bit11-9: 0x6, auto-precharge write recovery ???????????? ++# bit12: 0x0, PD must be zero ++# bit31-13: 0x0, required ++ ++DATA 0xffd01420 0x00000040 # DDR Extended Mode ++# bit0: 0, DDR DLL enabled ++# bit1: 0, DDR drive strenght normal ++# bit2: 1, DDR ODT control lsd (disabled) ++# bit5-3: 0x0, required ++# bit6: 0, DDR ODT control msb, (disabled) ++# bit9-7: 0x0, required ++# bit10: 0, differential DQS enabled ++# bit11: 0, required ++# bit12: 0, DDR output buffer enabled ++# bit31-13: 0x0, required ++ ++DATA 0xffd01424 0x0000f17f # DDR Controller Control High ++# bit2-0: 0x7, required ++# bit3: 0x1, MBUS Burst Chop disabled ++# bit6-4: 0x7, required ++# bit7: 0x0, ++# bit8: 0x1, add writepath sample stage, must be 1 for DDR freq >= 300MHz ++# bit9: 0x0, no half clock cycle addition to dataout ++# bit10: 0x0, 1/4 clock cycle skew enabled for addr/ctl signals ++# bit11: 0x0, 1/4 clock cycle skew disabled for write mesh ++# bit15-12: 0xf, required ++# bit31-16: 0, required ++ ++DATA 0xffd01428 0x00085520 # DDR2 ODT Read Timing (default values) ++DATA 0xffd0147c 0x00008552 # DDR2 ODT Write Timing (default values) ++ ++DATA 0xffd01500 0x00000000 # CS[0]n Base address to 0x0 ++DATA 0xffd01504 0x0ffffff1 # CS[0]n Size ++# bit0: 0x1, Window enabled ++# bit1: 0x0, Write Protect disabled ++# bit3-2: 0x0, CS0 hit selected ++# bit23-4: 0xfffff, required ++# bit31-24: 0x0f, Size (i.e. 256MB) ++ ++DATA 0xffd01508 0x10000000 # CS[1]n Base address to 256Mb ++DATA 0xffd0150c 0x00000000 # CS[1]n Size, window disabled ++ ++DATA 0xffd01514 0x00000000 # CS[2]n Size, window disabled ++DATA 0xffd0151c 0x00000000 # CS[3]n Size, window disabled ++ ++DATA 0xffd01494 0x00030000 # DDR ODT Control (Low) ++# bit3-0: ODT0Rd, MODT[0] asserted during read from DRAM CS1 ++# bit7-4: ODT0Rd, MODT[0] asserted during read from DRAM CS0 ++# bit19-16:2, ODT0Wr, MODT[0] asserted during write to DRAM CS1 ++# bit23-20:1, ODT0Wr, MODT[0] asserted during write to DRAM CS0 ++ ++DATA 0xffd01498 0x00000000 # DDR ODT Control (High) ++# bit1-0: 0x0, ODT0 controlled by ODT Control (low) register above ++# bit3-2: 0x1, ODT1 active NEVER! ++# bit31-4: 0x0, required ++ ++DATA 0xffd0149c 0x0000e803 # CPU ODT Control ++DATA 0xffd01480 0x00000001 # DDR Initialization Control ++# bit0: 0x1, enable DDR init upon this register write ++ ++DATA 0xFFD20134 0x66666666 # L2 RAM Timing 0 Register ++DATA 0xFFD20138 0x66666666 # L2 RAM Timing 1 Register ++ ++# End of Header extension ++DATA 0x0 0x0 +diff --git a/boards.cfg b/boards.cfg +index 3cf75c3..23f84e8 100644 +--- a/boards.cfg ++++ b/boards.cfg +@@ -153,6 +153,7 @@ openrd_client arm arm926ejs openrd Marvell + openrd_ultimate arm arm926ejs openrd Marvell kirkwood openrd:BOARD_IS_OPENRD_ULTIMATE + rd6281a arm arm926ejs - Marvell kirkwood + sheevaplug arm arm926ejs - Marvell kirkwood ++ib62x0 arm arm926ejs ib62x0 raidsonic kirkwood + dockstar arm arm926ejs - Seagate kirkwood + jadecpu arm arm926ejs jadecpu syteco mb86r0x + mx25pdk arm arm926ejs mx25pdk freescale mx25 mx25pdk:IMX_CONFIG=board/freescale/mx25pdk/imximage.cfg +diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h +new file mode 100644 +index 0000000..85856f2 +--- /dev/null ++++ b/include/configs/ib62x0.h +@@ -0,0 +1,150 @@ ++/* ++ * Copyright (C) 2011-2012 ++ * Gerald Kerma <dreagle@doukki.net> ++ * Luka Perkov <uboot@lukaperkov.net> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#ifndef _CONFIG_IB62x0_H ++#define _CONFIG_IB62x0_H ++ ++/* ++ * Version number information ++ */ ++#define CONFIG_IDENT_STRING " RaidSonic ICY BOX IB-NAS62x0" ++ ++/* ++ * High level configuration options ++ */ ++#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ ++#define CONFIG_KIRKWOOD /* SOC Family Name */ ++#define CONFIG_KW88F6281 /* SOC Name */ ++#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ ++ ++/* ++ * Machine type ++ */ ++#define CONFIG_MACH_TYPE MACH_TYPE_NAS6210 ++ ++/* ++ * Compression configuration ++ */ ++#define CONFIG_BZIP2 ++#define CONFIG_LZMA ++#define CONFIG_LZO ++ ++/* ++ * Commands configuration ++ */ ++#define CONFIG_SYS_NO_FLASH /* declare no flash (NOR/SPI) */ ++#define CONFIG_SYS_MVFS ++#include <config_cmd_default.h> ++#define CONFIG_CMD_ENV ++#define CONFIG_CMD_IDE ++#define CONFIG_CMD_MII ++#define CONFIG_CMD_NAND ++#define CONFIG_CMD_PING ++#define CONFIG_CMD_USB ++ ++/* ++ * mv-common.h should be defined after CMD configs since it used them ++ * to enable certain macros ++ */ ++#include "mv-common.h" ++ ++#undef CONFIG_SYS_PROMPT ++#define CONFIG_SYS_PROMPT "ib62x0 => " ++ ++/* ++ * Environment variables configuration ++ */ ++#ifdef CONFIG_CMD_NAND ++#define CONFIG_ENV_IS_IN_NAND ++#define CONFIG_ENV_SECT_SIZE 0x20000 ++#else ++#define CONFIG_ENV_IS_NOWHERE ++#endif ++#define CONFIG_ENV_SIZE 0x20000 ++#define CONFIG_ENV_OFFSET 0x80000 ++ ++/* ++ * Default environment variables ++ */ ++#define CONFIG_BOOTCOMMAND \ ++ "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ ++ "ubi part rootfs; " \ ++ "ubifsmount rootfs; " \ ++ "ubifsload 0x800000 ${kernel}; " \ ++ "bootm 0x800000" ++ ++#define CONFIG_MTDPARTS \ ++ "mtdparts=orion_nand:" \ ++ "0x80000@0x0(uboot)," \ ++ "0x20000@0x80000(uboot_env)," \ ++ "-@0xa0000(rootfs)\0" ++ ++#define CONFIG_EXTRA_ENV_SETTINGS \ ++ "console=console=ttyS0,115200\0" \ ++ "mtdids=nand0=orion_nand\0" \ ++ "mtdparts="CONFIG_MTDPARTS \ ++ "kernel=/boot/uImage\0" \ ++ "bootargs_root=noinitrd ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs\0" ++ ++/* ++ * Ethernet driver configuration ++ */ ++#ifdef CONFIG_CMD_NET ++#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ ++#define CONFIG_PHY_BASE_ADR 0 ++#undef CONFIG_RESET_PHY_R ++#endif /* CONFIG_CMD_NET */ ++ ++/* ++ * SATA driver configuration ++ */ ++#ifdef CONFIG_CMD_IDE ++#define __io ++#define CONFIG_IDE_PREINIT ++#define CONFIG_DOS_PARTITION ++#define CONFIG_MVSATA_IDE_USE_PORT0 ++#define CONFIG_MVSATA_IDE_USE_PORT1 ++#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET ++#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET ++#endif /* CONFIG_CMD_IDE */ ++ ++/* ++ * RTC driver configuration ++ */ ++#ifdef CONFIG_CMD_DATE ++#define CONFIG_RTC_MV ++#endif /* CONFIG_CMD_DATE */ ++ ++/* ++ * File system ++ */ ++#define CONFIG_CMD_EXT2 ++#define CONFIG_CMD_FAT ++#define CONFIG_CMD_JFFS2 ++#define CONFIG_CMD_UBI ++#define CONFIG_CMD_UBIFS ++#define CONFIG_RBTREE ++#define CONFIG_MTD_DEVICE ++#define CONFIG_MTD_PARTITIONS ++#define CONFIG_CMD_MTDPARTS ++ ++#endif /* _CONFIG_IB62x0_H */ |