diff options
Diffstat (limited to 'package/boot/uboot-kirkwood/patches/0001-ib62x0.patch')
| -rw-r--r-- | package/boot/uboot-kirkwood/patches/0001-ib62x0.patch | 542 |
1 files changed, 0 insertions, 542 deletions
diff --git a/package/boot/uboot-kirkwood/patches/0001-ib62x0.patch b/package/boot/uboot-kirkwood/patches/0001-ib62x0.patch deleted file mode 100644 index 0a7dc47..0000000 --- a/package/boot/uboot-kirkwood/patches/0001-ib62x0.patch +++ /dev/null @@ -1,542 +0,0 @@ -http://lists.denx.de/pipermail/u-boot/2012-April/122597.html -http://patchwork.ozlabs.org/patch/153293/ ---- - -diff --git a/MAINTAINERS b/MAINTAINERS -index 708ded7..9d2aba7 100644 ---- a/MAINTAINERS -+++ b/MAINTAINERS -@@ -777,6 +777,10 @@ Linus Walleij <linus.walleij@linaro.org> - integratorap various - integratorcp various - -+Luka Perkov <uboot@lukaperkov.net> -+ -+ ib62x0 ARM926EJS -+ - Dave Peverley <dpeverley@mpc-data.co.uk> - - omap730p2 ARM926EJS -diff --git a/board/raidsonic/ib62x0/Makefile b/board/raidsonic/ib62x0/Makefile -new file mode 100644 -index 0000000..d450f8d ---- /dev/null -+++ b/board/raidsonic/ib62x0/Makefile -@@ -0,0 +1,43 @@ -+# -+# (C) Copyright 2009 -+# Marvell Semiconductor <www.marvell.com> -+# Written-by: Prafulla Wadaskar <prafulla@marvell.com> -+# -+# See file CREDITS for list of people who contributed to this -+# project. -+# -+# This program is free software; you can redistribute it and/or -+# modify it under the terms of the GNU General Public License as -+# published by the Free Software Foundation; either version 2 of -+# the License, or (at your option) any later version. -+# -+# This program is distributed in the hope that it will be useful, -+# but WITHOUT ANY WARRANTY; without even the implied warranty of -+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+# GNU General Public License for more details. -+# -+# You should have received a copy of the GNU General Public License -+# along with this program. If not, see <http://www.gnu.org/licenses/>. -+# -+ -+include $(TOPDIR)/config.mk -+ -+LIB = $(obj)lib$(BOARD).o -+ -+COBJS := ib62x0.o -+ -+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -+OBJS := $(addprefix $(obj),$(COBJS)) -+SOBJS := $(addprefix $(obj),$(SOBJS)) -+ -+$(LIB): $(obj).depend $(OBJS) $(SOBJS) -+ $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -+ -+######################################################################### -+ -+# defines $(obj).depend target -+include $(SRCTREE)/rules.mk -+ -+sinclude $(obj).depend -+ -+######################################################################### -diff --git a/board/raidsonic/ib62x0/ib62x0.c b/board/raidsonic/ib62x0/ib62x0.c -new file mode 100644 -index 0000000..65f2c2e ---- /dev/null -+++ b/board/raidsonic/ib62x0/ib62x0.c -@@ -0,0 +1,79 @@ -+/* -+ * Copyright (C) 2011-2012 -+ * Gerald Kerma <dreagle@doukki.net> -+ * Luka Perkov <uboot@lukaperkov.net> -+ * Simon Baatz <gmbnomis@gmail.com> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see <http://www.gnu.org/licenses/>. -+ */ -+ -+#include <common.h> -+#include <miiphy.h> -+#include <asm/arch/cpu.h> -+#include <asm/arch/kirkwood.h> -+#include <asm/arch/mpp.h> -+#include "ib62x0.h" -+ -+DECLARE_GLOBAL_DATA_PTR; -+ -+int board_early_init_f(void) -+{ -+ /* -+ * default gpio configuration -+ * There are maximum 64 gpios controlled through 2 sets of registers -+ * the below configuration configures mainly initial LED status -+ */ -+ kw_config_gpio(IB62x0_OE_VAL_LOW, -+ IB62x0_OE_VAL_HIGH, -+ IB62x0_OE_LOW, IB62x0_OE_HIGH); -+ -+ /* Multi-Purpose Pins Functionality configuration */ -+ u32 kwmpp_config[] = { -+ MPP0_NF_IO2, -+ MPP1_NF_IO3, -+ MPP2_NF_IO4, -+ MPP3_NF_IO5, -+ MPP4_NF_IO6, -+ MPP5_NF_IO7, -+ MPP6_SYSRST_OUTn, -+ MPP8_TW_SDA, -+ MPP9_TW_SCK, -+ MPP10_UART0_TXD, -+ MPP11_UART0_RXD, -+ MPP18_NF_IO0, -+ MPP19_NF_IO1, -+ MPP20_SATA1_ACTn, -+ MPP21_SATA0_ACTn, -+ MPP22_GPIO, /* Power LED red */ -+ MPP24_GPIO, /* Power off device */ -+ MPP25_GPIO, /* Power LED green */ -+ MPP27_GPIO, /* USB transfer LED */ -+ MPP28_GPIO, /* Reset button */ -+ MPP29_GPIO, /* USB Copy button */ -+ 0 -+ }; -+ kirkwood_mpp_conf(kwmpp_config); -+ return 0; -+} -+ -+int board_init(void) -+{ -+ /* adress of boot parameters */ -+ gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100; -+ -+ return 0; -+} -diff --git a/board/raidsonic/ib62x0/ib62x0.h b/board/raidsonic/ib62x0/ib62x0.h -new file mode 100644 -index 0000000..0c30690 ---- /dev/null -+++ b/board/raidsonic/ib62x0/ib62x0.h -@@ -0,0 +1,40 @@ -+/* -+ * Copyright (C) 2011-2012 -+ * Gerald Kerma <dreagle@doukki.net> -+ * Simon Baatz <gmbnomis@gmail.com> -+ * Luka Perkov <uboot@lukaperkov.net> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see <http://www.gnu.org/licenses/>. -+ */ -+ -+#ifndef __IB62x0_H -+#define __IB62x0_H -+ -+#define IB62x0_OE_LOW (~(1 << 22 | 1 << 24 | 1 << 25 | 1 << 27)) -+#define IB62x0_OE_HIGH (~(0)) -+#define IB62x0_OE_VAL_LOW 0 -+#define IB62x0_OE_VAL_HIGH 0 -+ -+/* PHY related */ -+#define MV88E1116_LED_FCTRL_REG 10 -+#define MV88E1116_CPRSP_CR3_REG 21 -+#define MV88E1116_MAC_CTRL_REG 21 -+#define MV88E1116_PGADR_REG 22 -+#define MV88E1116_RGMII_TXTM_CTRL (1 << 4) -+#define MV88E1116_RGMII_RXTM_CTRL (1 << 5) -+ -+#endif /* __IB62x0_H */ -diff --git a/board/raidsonic/ib62x0/kwbimage.cfg b/board/raidsonic/ib62x0/kwbimage.cfg -new file mode 100644 -index 0000000..bd594eb ---- /dev/null -+++ b/board/raidsonic/ib62x0/kwbimage.cfg -@@ -0,0 +1,169 @@ -+# -+# Copyright (C) 2011-2012 -+# Gerald Kerma <dreagle@doukki.net> -+# Simon Baatz <gmbnomis@gmail.com> -+# Luka Perkov <uboot@lukaperkov.net> -+# -+# See file CREDITS for list of people who contributed to this -+# project. -+# -+# This program is free software; you can redistribute it and/or -+# modify it under the terms of the GNU General Public License as -+# published by the Free Software Foundation; either version 2 of -+# the License, or (at your option) any later version. -+# -+# This program is distributed in the hope that it will be useful, -+# but WITHOUT ANY WARRANTY; without even the implied warranty of -+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+# GNU General Public License for more details. -+# -+# You should have received a copy of the GNU General Public License -+# along with this program. If not, see <http://www.gnu.org/licenses/>. -+# -+# Refer docs/README.kwimage for more details about how-to configure -+# and create kirkwood boot image -+# -+ -+# Boot Media configurations -+BOOT_FROM nand # change from nand to uart if building UART image -+NAND_ECC_MODE default -+NAND_PAGE_SIZE 0x0800 -+ -+# SOC registers configuration using bootrom header extension -+# Maximum KWBIMAGE_MAX_CONFIG configurations allowed -+ -+# Configure RGMII-0 interface pad voltage to 1.8V -+DATA 0xffd100e0 0x1b1b1b9b -+ -+#Dram initalization for SINGLE x16 CL=5 @ 400MHz -+DATA 0xffd01400 0x43000c30 # DDR Configuration register -+# bit13-0: 0xc30, (3120 DDR2 clks refresh rate) -+# bit23-14: 0x0, -+# bit24: 0x1, enable exit self refresh mode on DDR access -+# bit25: 0x1, required -+# bit29-26: 0x0, -+# bit31-30: 0x1, -+ -+DATA 0xffd01404 0x37543000 # DDR Controller Control Low -+# bit4: 0x0, addr/cmd in smame cycle -+# bit5: 0x0, clk is driven during self refresh, we don't care for APX -+# bit6: 0x0, use recommended falling edge of clk for addr/cmd -+# bit14: 0x0, input buffer always powered up -+# bit18: 0x1, cpu lock transaction enabled -+# bit23-20: 0x5, recommended value for CL=5 and STARTBURST_DEL disabled bit31=0 -+# bit27-24: 0x7, CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM -+# bit30-28: 0x3, required -+# bit31: 0x0, no additional STARTBURST delay -+ -+DATA 0xffd01408 0x22125451 # DDR Timing (Low) (active cycles value +1) -+# bit3-0: TRAS lsbs -+# bit7-4: TRCD -+# bit11-8: TRP -+# bit15-12: TWR -+# bit19-16: TWTR -+# bit20: TRAS msb -+# bit23-21: 0x0 -+# bit27-24: TRRD -+# bit31-28: TRTP -+ -+DATA 0xffd0140c 0x00000a33 # DDR Timing (High) -+# bit6-0: TRFC -+# bit8-7: TR2R -+# bit10-9: TR2W -+# bit12-11: TW2W -+# bit31-13: 0x0, required -+ -+DATA 0xffd01410 0x0000000c # DDR Address Control -+# bit1-0: 00, Cs0width (x8) -+# bit3-2: 11, Cs0size (1Gb) -+# bit5-4: 00, Cs1width (x8) -+# bit7-6: 11, Cs1size (1Gb) -+# bit9-8: 00, Cs2width (nonexistent -+# bit11-10: 00, Cs2size (nonexistent -+# bit13-12: 00, Cs3width (nonexistent -+# bit15-14: 00, Cs3size (nonexistent -+# bit16: 0, Cs0AddrSel -+# bit17: 0, Cs1AddrSel -+# bit18: 0, Cs2AddrSel -+# bit19: 0, Cs3AddrSel -+# bit31-20: 0x0, required -+ -+DATA 0xffd01414 0x00000000 # DDR Open Pages Control -+# bit0: 0, OpenPage enabled -+# bit31-1: 0x0, required -+ -+DATA 0xffd01418 0x00000000 # DDR Operation -+# bit3-0: 0x0, DDR cmd -+# bit31-4: 0x0, required -+ -+DATA 0xffd0141c 0x00000c52 # DDR Mode -+# bit2-0: 0x2, BurstLen=2 required -+# bit3: 0x0, BurstType=0 required -+# bit6-4: 0x4, CL=5 -+# bit7: 0x0, TestMode=0 normal -+# bit8: 0x0, DLL reset=0 normal -+# bit11-9: 0x6, auto-precharge write recovery ???????????? -+# bit12: 0x0, PD must be zero -+# bit31-13: 0x0, required -+ -+DATA 0xffd01420 0x00000040 # DDR Extended Mode -+# bit0: 0, DDR DLL enabled -+# bit1: 0, DDR drive strenght normal -+# bit2: 1, DDR ODT control lsd (disabled) -+# bit5-3: 0x0, required -+# bit6: 0, DDR ODT control msb, (disabled) -+# bit9-7: 0x0, required -+# bit10: 0, differential DQS enabled -+# bit11: 0, required -+# bit12: 0, DDR output buffer enabled -+# bit31-13: 0x0, required -+ -+DATA 0xffd01424 0x0000f17f # DDR Controller Control High -+# bit2-0: 0x7, required -+# bit3: 0x1, MBUS Burst Chop disabled -+# bit6-4: 0x7, required -+# bit7: 0x0, -+# bit8: 0x1, add writepath sample stage, must be 1 for DDR freq >= 300MHz -+# bit9: 0x0, no half clock cycle addition to dataout -+# bit10: 0x0, 1/4 clock cycle skew enabled for addr/ctl signals -+# bit11: 0x0, 1/4 clock cycle skew disabled for write mesh -+# bit15-12: 0xf, required -+# bit31-16: 0, required -+ -+DATA 0xffd01428 0x00085520 # DDR2 ODT Read Timing (default values) -+DATA 0xffd0147c 0x00008552 # DDR2 ODT Write Timing (default values) -+ -+DATA 0xffd01500 0x00000000 # CS[0]n Base address to 0x0 -+DATA 0xffd01504 0x0ffffff1 # CS[0]n Size -+# bit0: 0x1, Window enabled -+# bit1: 0x0, Write Protect disabled -+# bit3-2: 0x0, CS0 hit selected -+# bit23-4: 0xfffff, required -+# bit31-24: 0x0f, Size (i.e. 256MB) -+ -+DATA 0xffd01508 0x10000000 # CS[1]n Base address to 256Mb -+DATA 0xffd0150c 0x00000000 # CS[1]n Size, window disabled -+ -+DATA 0xffd01514 0x00000000 # CS[2]n Size, window disabled -+DATA 0xffd0151c 0x00000000 # CS[3]n Size, window disabled -+ -+DATA 0xffd01494 0x00030000 # DDR ODT Control (Low) -+# bit3-0: ODT0Rd, MODT[0] asserted during read from DRAM CS1 -+# bit7-4: ODT0Rd, MODT[0] asserted during read from DRAM CS0 -+# bit19-16:2, ODT0Wr, MODT[0] asserted during write to DRAM CS1 -+# bit23-20:1, ODT0Wr, MODT[0] asserted during write to DRAM CS0 -+ -+DATA 0xffd01498 0x00000000 # DDR ODT Control (High) -+# bit1-0: 0x0, ODT0 controlled by ODT Control (low) register above -+# bit3-2: 0x1, ODT1 active NEVER! -+# bit31-4: 0x0, required -+ -+DATA 0xffd0149c 0x0000e803 # CPU ODT Control -+DATA 0xffd01480 0x00000001 # DDR Initialization Control -+# bit0: 0x1, enable DDR init upon this register write -+ -+DATA 0xFFD20134 0x66666666 # L2 RAM Timing 0 Register -+DATA 0xFFD20138 0x66666666 # L2 RAM Timing 1 Register -+ -+# End of Header extension -+DATA 0x0 0x0 -diff --git a/boards.cfg b/boards.cfg -index 3cf75c3..23f84e8 100644 ---- a/boards.cfg -+++ b/boards.cfg -@@ -153,6 +153,7 @@ openrd_client arm arm926ejs openrd Marvell - openrd_ultimate arm arm926ejs openrd Marvell kirkwood openrd:BOARD_IS_OPENRD_ULTIMATE - rd6281a arm arm926ejs - Marvell kirkwood - sheevaplug arm arm926ejs - Marvell kirkwood -+ib62x0 arm arm926ejs ib62x0 raidsonic kirkwood - dockstar arm arm926ejs - Seagate kirkwood - jadecpu arm arm926ejs jadecpu syteco mb86r0x - mx25pdk arm arm926ejs mx25pdk freescale mx25 mx25pdk:IMX_CONFIG=board/freescale/mx25pdk/imximage.cfg -diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h -new file mode 100644 -index 0000000..85856f2 ---- /dev/null -+++ b/include/configs/ib62x0.h -@@ -0,0 +1,150 @@ -+/* -+ * Copyright (C) 2011-2012 -+ * Gerald Kerma <dreagle@doukki.net> -+ * Luka Perkov <uboot@lukaperkov.net> -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see <http://www.gnu.org/licenses/>. -+ */ -+ -+#ifndef _CONFIG_IB62x0_H -+#define _CONFIG_IB62x0_H -+ -+/* -+ * Version number information -+ */ -+#define CONFIG_IDENT_STRING " RaidSonic ICY BOX IB-NAS62x0" -+ -+/* -+ * High level configuration options -+ */ -+#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ -+#define CONFIG_KIRKWOOD /* SOC Family Name */ -+#define CONFIG_KW88F6281 /* SOC Name */ -+#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ -+ -+/* -+ * Machine type -+ */ -+#define CONFIG_MACH_TYPE MACH_TYPE_NAS6210 -+ -+/* -+ * Compression configuration -+ */ -+#define CONFIG_BZIP2 -+#define CONFIG_LZMA -+#define CONFIG_LZO -+ -+/* -+ * Commands configuration -+ */ -+#define CONFIG_SYS_NO_FLASH /* declare no flash (NOR/SPI) */ -+#define CONFIG_SYS_MVFS -+#include <config_cmd_default.h> -+#define CONFIG_CMD_ENV -+#define CONFIG_CMD_IDE -+#define CONFIG_CMD_MII -+#define CONFIG_CMD_NAND -+#define CONFIG_CMD_PING -+#define CONFIG_CMD_USB -+ -+/* -+ * mv-common.h should be defined after CMD configs since it used them -+ * to enable certain macros -+ */ -+#include "mv-common.h" -+ -+#undef CONFIG_SYS_PROMPT -+#define CONFIG_SYS_PROMPT "ib62x0 => " -+ -+/* -+ * Environment variables configuration -+ */ -+#ifdef CONFIG_CMD_NAND -+#define CONFIG_ENV_IS_IN_NAND -+#define CONFIG_ENV_SECT_SIZE 0x20000 -+#else -+#define CONFIG_ENV_IS_NOWHERE -+#endif -+#define CONFIG_ENV_SIZE 0x20000 -+#define CONFIG_ENV_OFFSET 0x80000 -+ -+/* -+ * Default environment variables -+ */ -+#define CONFIG_BOOTCOMMAND \ -+ "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ -+ "ubi part rootfs; " \ -+ "ubifsmount rootfs; " \ -+ "ubifsload 0x800000 ${kernel}; " \ -+ "bootm 0x800000" -+ -+#define CONFIG_MTDPARTS \ -+ "mtdparts=orion_nand:" \ -+ "0x80000@0x0(uboot)," \ -+ "0x20000@0x80000(uboot_env)," \ -+ "-@0xa0000(rootfs)\0" -+ -+#define CONFIG_EXTRA_ENV_SETTINGS \ -+ "console=console=ttyS0,115200\0" \ -+ "mtdids=nand0=orion_nand\0" \ -+ "mtdparts="CONFIG_MTDPARTS \ -+ "kernel=/boot/uImage\0" \ -+ "bootargs_root=noinitrd ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs\0" -+ -+/* -+ * Ethernet driver configuration -+ */ -+#ifdef CONFIG_CMD_NET -+#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -+#define CONFIG_PHY_BASE_ADR 0 -+#undef CONFIG_RESET_PHY_R -+#endif /* CONFIG_CMD_NET */ -+ -+/* -+ * SATA driver configuration -+ */ -+#ifdef CONFIG_CMD_IDE -+#define __io -+#define CONFIG_IDE_PREINIT -+#define CONFIG_DOS_PARTITION -+#define CONFIG_MVSATA_IDE_USE_PORT0 -+#define CONFIG_MVSATA_IDE_USE_PORT1 -+#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET -+#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET -+#endif /* CONFIG_CMD_IDE */ -+ -+/* -+ * RTC driver configuration -+ */ -+#ifdef CONFIG_CMD_DATE -+#define CONFIG_RTC_MV -+#endif /* CONFIG_CMD_DATE */ -+ -+/* -+ * File system -+ */ -+#define CONFIG_CMD_EXT2 -+#define CONFIG_CMD_FAT -+#define CONFIG_CMD_JFFS2 -+#define CONFIG_CMD_UBI -+#define CONFIG_CMD_UBIFS -+#define CONFIG_RBTREE -+#define CONFIG_MTD_DEVICE -+#define CONFIG_MTD_PARTITIONS -+#define CONFIG_CMD_MTDPARTS -+ -+#endif /* _CONFIG_IB62x0_H */ |