diff options
Diffstat (limited to 'package/boot/uboot-lantiq/patches/0034-MIPS-add-board-support-for-ZyXEL-P-2601HN-Fx.patch')
| -rw-r--r-- | package/boot/uboot-lantiq/patches/0034-MIPS-add-board-support-for-ZyXEL-P-2601HN-Fx.patch | 262 |
1 files changed, 262 insertions, 0 deletions
diff --git a/package/boot/uboot-lantiq/patches/0034-MIPS-add-board-support-for-ZyXEL-P-2601HN-Fx.patch b/package/boot/uboot-lantiq/patches/0034-MIPS-add-board-support-for-ZyXEL-P-2601HN-Fx.patch new file mode 100644 index 0000000..0cbcd6c --- /dev/null +++ b/package/boot/uboot-lantiq/patches/0034-MIPS-add-board-support-for-ZyXEL-P-2601HN-Fx.patch @@ -0,0 +1,262 @@ +From 4bfa74583bc938d2da41f255f22baa1845332893 Mon Sep 17 00:00:00 2001 +From: Luka Perkov <luka@openwrt.org> +Date: Tue, 12 Mar 2013 01:42:46 +0100 +Subject: MIPS: add board support for ZyXEL P-2601HN-Fx + +Signed-off-by: Luka Perkov <luka@openwrt.org> + +diff --git a/board/zyxel/p2601hnfx/Makefile b/board/zyxel/p2601hnfx/Makefile +new file mode 100644 +index 0000000..3a547c2 +--- /dev/null ++++ b/board/zyxel/p2601hnfx/Makefile +@@ -0,0 +1,27 @@ ++# ++# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de ++# ++# SPDX-License-Identifier: GPL-2.0+ ++# ++ ++include $(TOPDIR)/config.mk ++ ++LIB = $(obj)lib$(BOARD).o ++ ++COBJS = $(BOARD).o ++ ++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) ++OBJS := $(addprefix $(obj),$(COBJS)) ++SOBJS := $(addprefix $(obj),$(SOBJS)) ++ ++$(LIB): $(obj).depend $(OBJS) $(SOBJS) ++ $(call cmd_link_o_target, $(OBJS) $(SOBJS)) ++ ++######################################################################### ++ ++# defines $(obj).depend target ++include $(SRCTREE)/rules.mk ++ ++sinclude $(obj).depend ++ ++######################################################################### +diff --git a/board/zyxel/p2601hnfx/config.mk b/board/zyxel/p2601hnfx/config.mk +new file mode 100644 +index 0000000..9d33739 +--- /dev/null ++++ b/board/zyxel/p2601hnfx/config.mk +@@ -0,0 +1,7 @@ ++# ++# Copyright (C) 2012-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com ++# ++# SPDX-License-Identifier: GPL-2.0+ ++# ++ ++PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR) +diff --git a/board/zyxel/p2601hnfx/ddr_settings.h b/board/zyxel/p2601hnfx/ddr_settings.h +new file mode 100644 +index 0000000..92af4fa +--- /dev/null ++++ b/board/zyxel/p2601hnfx/ddr_settings.h +@@ -0,0 +1,55 @@ ++/* ++ * Copyright (C) 2013 Luka Perkov <luka@openwrt.org> ++ * ++ * The values have been extracted from original ZyXEL U-Boot. ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#define MC_DC00_VALUE 0x1B1B ++#define MC_DC01_VALUE 0x0 ++#define MC_DC02_VALUE 0x0 ++#define MC_DC03_VALUE 0x0 ++#define MC_DC04_VALUE 0x0 ++#define MC_DC05_VALUE 0x200 ++#define MC_DC06_VALUE 0x306 ++#define MC_DC07_VALUE 0x303 ++#define MC_DC08_VALUE 0x102 ++#define MC_DC09_VALUE 0x70A ++#define MC_DC10_VALUE 0x203 ++#define MC_DC11_VALUE 0xC02 ++#define MC_DC12_VALUE 0x1C8 ++#define MC_DC13_VALUE 0x1 ++#define MC_DC14_VALUE 0x0 ++#define MC_DC15_VALUE 0x144 ++#define MC_DC16_VALUE 0xC800 ++#define MC_DC17_VALUE 0xD ++#define MC_DC18_VALUE 0x301 ++#define MC_DC19_VALUE 0x200 ++#define MC_DC20_VALUE 0xA03 ++#define MC_DC21_VALUE 0x1900 ++#define MC_DC22_VALUE 0x1919 ++#define MC_DC23_VALUE 0x0 ++#define MC_DC24_VALUE 0x66 ++#define MC_DC25_VALUE 0x0 ++#define MC_DC26_VALUE 0x0 ++#define MC_DC27_VALUE 0x0 ++#define MC_DC28_VALUE 0x50A ++#define MC_DC29_VALUE 0x2D65 ++#define MC_DC30_VALUE 0x81B1 ++#define MC_DC31_VALUE 0x0 ++#define MC_DC32_VALUE 0x0 ++#define MC_DC33_VALUE 0x0 ++#define MC_DC34_VALUE 0x0 ++#define MC_DC35_VALUE 0x0 ++#define MC_DC36_VALUE 0x0 ++#define MC_DC37_VALUE 0x0 ++#define MC_DC38_VALUE 0x0 ++#define MC_DC39_VALUE 0x0 ++#define MC_DC40_VALUE 0x0 ++#define MC_DC41_VALUE 0x0 ++#define MC_DC42_VALUE 0x0 ++#define MC_DC43_VALUE 0x0 ++#define MC_DC44_VALUE 0x0 ++#define MC_DC45_VALUE 0x600 ++#define MC_DC46_VALUE 0x0 +diff --git a/board/zyxel/p2601hnfx/p2601hnfx.c b/board/zyxel/p2601hnfx/p2601hnfx.c +new file mode 100644 +index 0000000..6a69af9 +--- /dev/null ++++ b/board/zyxel/p2601hnfx/p2601hnfx.c +@@ -0,0 +1,51 @@ ++/* ++ * Copyright (C) 2013 Luka Perkov <luka@openwrt.org> ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#include <common.h> ++#include <switch.h> ++#include <asm/gpio.h> ++#include <asm/lantiq/eth.h> ++#include <asm/lantiq/reset.h> ++#include <asm/lantiq/chipid.h> ++ ++int board_early_init_f(void) ++{ ++ return 0; ++} ++ ++int checkboard(void) ++{ ++ puts("Board: " CONFIG_BOARD_NAME "\n"); ++ ltq_chip_print_info(); ++ ++ return 0; ++} ++ ++static const struct ltq_eth_port_config eth_port_config[] = { ++ /* MAC0: REALTEK RTL8306 switch */ ++ { 0, 0x0, LTQ_ETH_PORT_SWITCH, PHY_INTERFACE_MODE_RMII }, ++}; ++ ++static const struct ltq_eth_board_config eth_board_config = { ++ .ports = eth_port_config, ++ .num_ports = ARRAY_SIZE(eth_port_config), ++}; ++ ++int board_eth_init(bd_t *bis) ++{ ++ return ltq_eth_initialize(ð_board_config); ++} ++ ++static struct switch_device rtl8306_dev = { ++ .name = "rtl8306", ++ .cpu_port = 5, ++ .port_mask = 0xF, ++}; ++ ++int board_switch_init(void) ++{ ++ return switch_device_register(&rtl8306_dev); ++} +diff --git a/boards.cfg b/boards.cfg +index e505203..45c2aa0 100644 +--- a/boards.cfg ++++ b/boards.cfg +@@ -499,6 +499,10 @@ Active mips mips32 - micronas vct + Active mips mips32 arx100 zte zxv10h201l zxv10h201l_nor zxv10h201l:SYS_BOOT_NOR Luka Perkov <luka@openwrt.org> + Active mips mips32 arx100 zte zxv10h201l zxv10h201l_ram zxv10h201l:SYS_BOOT_RAM Luka Perkov <luka@openwrt.org> + Active mips mips32 arx100 zte zxv10h201l zxv10h201l_zte zxv10h201l:SYS_BOOT_ZTE Luka Perkov <luka@openwrt.org> ++Active mips mips32 arx100 zyxel p2601hnfx p2601hnfx_nor p2601hnfx:SYS_BOOT_NOR Luka Perkov <luka@openwrt.org> ++Active mips mips32 arx100 zyxel p2601hnfx p2601hnfx_norspl p2601hnfx:SYS_BOOT_NORSPL Luka Perkov <luka@openwrt.org> ++Active mips mips32 arx100 zyxel p2601hnfx p2601hnfx_ram p2601hnfx:SYS_BOOT_RAM Luka Perkov <luka@openwrt.org> ++Active mips mips32 arx100 zyxel p2601hnfx p2601hnfx_zyxel p2601hnfx:SYS_BOOT_ZYXEL Luka Perkov <luka@openwrt.org> + Active mips mips32 arx100 zyxel p661hnufx p661hnufx_ram p661hnufx:SYS_BOOT_RAM Luka Perkov <luka@openwrt.org> + Active mips mips32 arx100 zyxel p661hnufx p661hnufx_sfspl p661hnufx:SYS_BOOT_SFSPL Luka Perkov <luka@openwrt.org> + Active mips mips32 arx100 zyxel p661hnufx p661hnufx_zyxel p661hnufx:SYS_BOOT_ZYXEL Luka Perkov <luka@openwrt.org> +diff --git a/include/configs/p2601hnfx.h b/include/configs/p2601hnfx.h +new file mode 100644 +index 0000000..5cba30f +--- /dev/null ++++ b/include/configs/p2601hnfx.h +@@ -0,0 +1,67 @@ ++/* ++ * Copyright (C) 2013 Luka Perkov <luka@openwrt.org> ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++#define CONFIG_MACH_TYPE "P-2601HN-Fx" ++#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE ++#define CONFIG_BOARD_NAME "ZyXEL P-2601HN-Fx" ++ ++/* Configure SoC */ ++#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */ ++ ++#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */ ++ ++#define CONFIG_LTQ_SUPPORT_SPL_NOR_FLASH /* Build NOR flash SPL */ ++#define CONFIG_LTQ_SPL_COMP_LZO /* Compress SPL with LZO */ ++#define CONFIG_LTQ_SPL_CONSOLE /* Enable SPL console */ ++ ++/* Environment */ ++#if defined(CONFIG_SYS_BOOT_NOR) ++#define CONFIG_ENV_IS_IN_FLASH ++#define CONFIG_ENV_OVERWRITE ++#define CONFIG_ENV_OFFSET (256 * 1024) ++#define CONFIG_ENV_SECT_SIZE (128 * 1024) ++#elif defined(CONFIG_SYS_BOOT_NORSPL) ++#define CONFIG_ENV_IS_IN_FLASH ++#define CONFIG_ENV_OVERWRITE ++#define CONFIG_ENV_OFFSET (128 * 1024) ++#define CONFIG_ENV_SECT_SIZE (128 * 1024) ++#else ++#define CONFIG_ENV_IS_NOWHERE ++#endif ++ ++#define CONFIG_ENV_SIZE (8 * 1024) ++#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR ++ ++#if defined(CONFIG_SYS_BOOT_ZYXEL) ++#define CONFIG_SYS_TEXT_BASE 0x80800000 ++#define CONFIG_SKIP_LOWLEVEL_INIT ++#endif ++ ++/* Console */ ++#define CONFIG_LTQ_ADVANCED_CONSOLE ++#define CONFIG_BAUDRATE 115200 ++#define CONFIG_CONSOLE_ASC 1 ++#define CONFIG_CONSOLE_DEV "ttyLTQ1" ++ ++/* Pull in default board configs for Lantiq XWAY Danube */ ++#include <asm/lantiq/config.h> ++#include <asm/arch/config.h> ++ ++/* Pull in default OpenWrt configs for Lantiq SoC */ ++#include "openwrt-lantiq-common.h" ++ ++#define CONFIG_ENV_UPDATE_UBOOT_NOR \ ++ "update-uboot-nor=run load-uboot-norspl-lzo write-uboot-nor\0" ++ ++#define CONFIG_EXTRA_ENV_SETTINGS \ ++ CONFIG_ENV_LANTIQ_DEFAULTS \ ++ CONFIG_ENV_UPDATE_UBOOT_NOR \ ++ "kernel_addr=0xB0040000\0" ++ ++#endif /* __CONFIG_H */ +-- +1.8.3.2 + |