summaryrefslogtreecommitdiff
path: root/package/boot/uboot-sunxi/patches/093-sun6i-fix-PLL-LDO-voltselect.patch
diff options
context:
space:
mode:
Diffstat (limited to 'package/boot/uboot-sunxi/patches/093-sun6i-fix-PLL-LDO-voltselect.patch')
-rw-r--r--package/boot/uboot-sunxi/patches/093-sun6i-fix-PLL-LDO-voltselect.patch77
1 files changed, 77 insertions, 0 deletions
diff --git a/package/boot/uboot-sunxi/patches/093-sun6i-fix-PLL-LDO-voltselect.patch b/package/boot/uboot-sunxi/patches/093-sun6i-fix-PLL-LDO-voltselect.patch
new file mode 100644
index 0000000..e6af765
--- /dev/null
+++ b/package/boot/uboot-sunxi/patches/093-sun6i-fix-PLL-LDO-voltselect.patch
@@ -0,0 +1,77 @@
+From b2b385df5095fff80b4655142f58a2a6801e6c80 Mon Sep 17 00:00:00 2001
+From: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
+Date: Tue, 6 Jan 2015 21:26:44 +0100
+Subject: sun6i: Fix and document PLL LDO voltage selection
+
+The PRCM_PLL_CTRL_LDO_OUT_L and PRCM_PLL_CTRL_LDO_OUT_H macros had
+their meaning reversed. This is fixed by this change-set. With this
+changed, the PRCM_PLL_CTRL_LDO_OUT_L(1370) now becomes self-evident
+as setting the voltage to 1.37v (which it had done all along, even
+though stating a different target voltage).
+
+After changing the PLL LDO setting, it will take a little while for
+the voltage output to settle. A sdelay()-based loop waits the same
+order of magnitude as Boot1.
+
+Furthermore, a bit of documentation is added to clarify that the
+required setting for the PLL LDO is 1.37v as per the A31 manual.
+
+diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
+index fa7ebd8..3a6e56e 100644
+--- a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
++++ b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
+@@ -24,14 +24,27 @@ void clock_init_safe(void)
+ struct sunxi_prcm_reg * const prcm =
+ (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
+
+- /* Set PLL ldo voltage without this PLL6 does not work properly */
++ /* Set PLL ldo voltage without this PLL6 does not work properly.
++ *
++ * As the A31 manual states, that "before enable PLL, PLLVDD
++ * LDO should be set to 1.37v", we need to configure this to 2.5v
++ * in the "PLL Input Power Select" (0 << 15) and (7 << 16).
++ */
+ clrsetbits_le32(&prcm->pll_ctrl1, PRCM_PLL_CTRL_LDO_KEY_MASK,
+ PRCM_PLL_CTRL_LDO_KEY);
+ clrsetbits_le32(&prcm->pll_ctrl1, ~PRCM_PLL_CTRL_LDO_KEY_MASK,
+ PRCM_PLL_CTRL_LDO_DIGITAL_EN | PRCM_PLL_CTRL_LDO_ANALOG_EN |
+- PRCM_PLL_CTRL_EXT_OSC_EN | PRCM_PLL_CTRL_LDO_OUT_L(1140));
++ PRCM_PLL_CTRL_EXT_OSC_EN | PRCM_PLL_CTRL_LDO_OUT_L(1370) );
+ clrbits_le32(&prcm->pll_ctrl1, PRCM_PLL_CTRL_LDO_KEY_MASK);
+
++ /* Give the PLL LDO voltage setting some time to take hold.
++ * Notes:
++ * 1) We need to use sdelay() as the timers aren't set up yet.
++ * 2) The 100k iterations come from Boot1, which spin's for 100k
++ * iterations through a loop.
++ */
++ sdelay(100000);
++
+ clock_set_pll1(408000000);
+
+ writel(AHB1_ABP1_DIV_DEFAULT, &ccm->ahb1_apb1_div);
+diff --git a/arch/arm/include/asm/arch-sunxi/prcm.h b/arch/arm/include/asm/arch-sunxi/prcm.h
+index 82ed541..41a62a4 100644
+--- a/arch/arm/include/asm/arch-sunxi/prcm.h
++++ b/arch/arm/include/asm/arch-sunxi/prcm.h
+@@ -111,13 +111,13 @@
+ #define PRCM_PLL_CTRL_LDO_OUT_MASK \
+ __PRCM_PLL_CTRL_LDO_OUT(0x7)
+ /* When using the low voltage 20 mV steps, and high voltage 30 mV steps */
+-#define PRCM_PLL_CTRL_LDO_OUT_L(n) \
+- __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) - 1000) / 20) & 0x7)
+ #define PRCM_PLL_CTRL_LDO_OUT_H(n) \
++ __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) - 1000) / 20) & 0x7)
++#define PRCM_PLL_CTRL_LDO_OUT_L(n) \
+ __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) - 1160) / 30) & 0x7)
+-#define PRCM_PLL_CTRL_LDO_OUT_LV(n) \
+- __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 20) + 1000)
+ #define PRCM_PLL_CTRL_LDO_OUT_HV(n) \
++ __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 20) + 1000)
++#define PRCM_PLL_CTRL_LDO_OUT_LV(n) \
+ __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 30) + 1160)
+ #define PRCM_PLL_CTRL_LDO_KEY (0xa7 << 24)
+ #define PRCM_PLL_CTRL_LDO_KEY_MASK (0xff << 24)
+--
+cgit v0.10.2
+