summaryrefslogtreecommitdiff
path: root/package/hostapd
diff options
context:
space:
mode:
Diffstat (limited to 'package/hostapd')
-rw-r--r--package/hostapd/Config.in22
-rw-r--r--package/hostapd/Makefile192
-rw-r--r--package/hostapd/files/hostapd-full.config (renamed from package/hostapd/files/full.config)0
-rw-r--r--package/hostapd/files/hostapd-mini.config (renamed from package/hostapd/files/mini.config)0
-rw-r--r--package/hostapd/files/multicall.c28
-rw-r--r--package/hostapd/files/wpa_supplicant-full.config404
-rw-r--r--package/hostapd/files/wpa_supplicant-mini.config404
-rw-r--r--package/hostapd/files/wpa_supplicant.sh117
-rw-r--r--package/hostapd/patches/200-multicall.patch236
-rw-r--r--package/hostapd/patches/300-timestamp_check.patch15
-rw-r--r--package/hostapd/patches/310-scan_ssid.patch37
-rw-r--r--package/hostapd/patches/320-rescan_immediately.patch11
-rw-r--r--package/hostapd/patches/330-madwifi_merge.patch767
13 files changed, 2225 insertions, 8 deletions
diff --git a/package/hostapd/Config.in b/package/hostapd/Config.in
new file mode 100644
index 0000000..e185820
--- /dev/null
+++ b/package/hostapd/Config.in
@@ -0,0 +1,22 @@
+# wpa_supplicant config
+config WPA_SUPPLICANT_NO_TIMESTAMP_CHECK
+ bool "Disable timestamp check"
+ depends PACKAGE_wpa-supplicant || PACKAGE_wpa-supplicant-mini || PACKAGE_wpad || PACKAGE_wpad-mini
+ default n
+ help
+ This disables the timestamp check for certificates in wpa_supplicant
+ Useful for devices without RTC that cannot reliably get the real date/time
+
+choice
+ prompt "Choose TLS provider"
+ default WPA_SUPPLICANT_INTERNAL
+ depends PACKAGE_wpa-supplicant
+
+config WPA_SUPPLICANT_INTERNAL
+ bool "internal"
+
+config WPA_SUPPLICANT_OPENSSL
+ bool "openssl"
+ select PACKAGE_libopenssl
+
+endchoice
diff --git a/package/hostapd/Makefile b/package/hostapd/Makefile
index 682d6ab..cb31b58 100644
--- a/package/hostapd/Makefile
+++ b/package/hostapd/Makefile
@@ -23,6 +23,7 @@ PKG_BUILD_DEPENDS:= \
PACKAGE_kmod-mac80211:mac80211 \
PKG_CONFIG_DEPENDS:= \
+ CONFIG_WPA_SUPPLICANT_NO_TIMESTAMP_CHECK \
CONFIG_PACKAGE_kmod-ath9k \
CONFIG_PACKAGE_kmod-mac80211 \
CONFIG_PACKAGE_kmod-madwifi \
@@ -30,6 +31,21 @@ PKG_CONFIG_DEPENDS:= \
CONFIG_PACKAGE_hostapd-mini \
CONFIG_PACKAGE_kmod-hostap
+LOCAL_TYPE=$(strip \
+ $(if $(findstring wpad,$(BUILD_VARIANT)),wpad, \
+ $(if $(findstring supplicant,$(BUILD_VARIANT)),supplicant, \
+ hostapd \
+ )))
+LOCAL_VARIANT=$(patsubst wpad-%,%,$(patsubst supplicant-%,%,$(BUILD_VARIANT)))
+
+ifeq ($(LOCAL_TYPE),supplicant)
+ ifeq ($(LOCAL_VARIANT),full)
+ PKG_CONFIG_DEPENDS += \
+ CONFIG_WPA_SUPPLICANT_INTERNAL \
+ CONFIG_WPA_SUPPLICANT_OPENSSL
+ endif
+endif
+
PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
include $(INCLUDE_DIR)/package.mk
@@ -38,8 +54,21 @@ DRIVER_MAKEOPTS= \
CONFIG_DRIVER_NL80211=$(CONFIG_PACKAGE_kmod-mac80211) \
CONFIG_DRIVER_MADWIFI=$(CONFIG_PACKAGE_kmod-madwifi) \
CONFIG_DRIVER_HOSTAP=$(CONFIG_PACKAGE_kmod-hostap) \
+ CONFIG_DRIVER_ROBOSWITCH=$(CONFIG_PACKAGE_kmod-switch) \
CONFIG_IEEE80211N=$(CONFIG_PACKAGE_kmod-ath9k)
+ifeq ($(LOCAL_TYPE),supplicant)
+ ifeq ($(LOCAL_VARIANT),full)
+ DRIVER_MAKEOPTS += $(if $(CONFIG_WPA_SUPPLICANT_OPENSSL),CONFIG_TLS=openssl)
+ endif
+endif
+
+ifneq ($(LOCAL_TYPE),hostapd)
+ ifdef CONFIG_WPA_SUPPLICANT_NO_TIMESTAMP_CHECK
+ TARGET_CFLAGS += -DNO_TIMESTAMP_CHECK
+ endif
+endif
+
define Package/hostapd/Default
SECTION:=net
CATEGORY:=Network
@@ -80,11 +109,79 @@ define Package/hostapd-utils/description
IEEE 802.1x/WPA/EAP/RADIUS Authenticator.
endef
+define Package/wpad/Default
+ SECTION:=net
+ CATEGORY:=Network
+ TITLE:=IEEE 802.1x Authenticator/Supplicant
+ URL:=http://hostap.epitest.fi/
+ DEPENDS:=@!TARGET_avr32 @!TARGET_etrax +PACKAGE_kmod-mac80211:libnl-tiny
+endef
+
+define Package/wpad
+$(call Package/wpad/Default)
+ TITLE+= (full)
+ VARIANT:=wpad-full
+endef
+
+define Package/wpad/description
+ This package contains a full featured IEEE 802.1x/WPA/EAP/RADIUS
+ Authenticator and Supplicant
+endef
+
+define Package/wpad-mini
+$(call Package/wpad/Default)
+ TITLE+= (WPA-PSK only)
+ VARIANT:=wpad-mini
+endef
+
+define Package/wpad-mini/description
+ This package contains a minimal IEEE 802.1x/WPA Authenticator and Supplicant (WPA-PSK only).
+endef
+
+define Package/wpa-supplicant
+ SECTION:=net
+ CATEGORY:=Network
+ TITLE:=WPA Supplicant
+ URL:=http://hostap.epitest.fi/wpa_supplicant/
+ VARIANT:=supplicant-full
+endef
+
+define Package/wpa-supplicant/Description
+ WPA Supplicant
+endef
+
+define Package/wpa-supplicant/config
+ source "$(SOURCE)/Config.in"
+endef
+
+define Package/wpa-supplicant-mini
+ $(Package/wpa-supplicant)
+ TITLE:=WPA Supplicant (minimal version)
+ DEPENDS:=$(if $(CONFIG_WPA_SUPPLICANT_OPENSSL),+libopenssl)
+ VARIANT:=supplicant-mini
+endef
+
+define Package/wpa-supplicant-mini/Description
+ WPA Supplicant (minimal version)
+endef
+
+define Package/wpa-cli
+ SECTION:=net
+ CATEGORY:=Network
+ DEPENDS:=wpa-supplicant
+ TITLE:=WPA Supplicant command line interface
+endef
+
+define Package/wpa-cli/Description
+ WPA Supplicant control utility
+endef
+
+
ifneq ($(wildcard $(PKG_BUILD_DIR)/.config_*),$(subst .configured_,.config_,$(STAMP_CONFIGURED)))
- $(warning $(wildcard $(PKG_BUILD_DIR)/.config_*) != $(subst .configured_,.config_,$(STAMP_CONFIGURED)))
define Build/Configure/rebuild
- $(FIND) $(PKG_BUILD_DIR) -name \*.o | $(XARGS) rm -f
+ $(FIND) $(PKG_BUILD_DIR) -name \*.o -or -name \*.a | $(XARGS) rm -f
rm -f $(PKG_BUILD_DIR)/hostapd/hostapd
+ rm -f $(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant
rm -f $(PKG_BUILD_DIR)/.config_*
touch $(subst .configured_,.config_,$(STAMP_CONFIGURED))
endef
@@ -92,7 +189,8 @@ endif
define Build/Configure
$(Build/Configure/rebuild)
- $(CP) ./files/$(BUILD_VARIANT).config $(PKG_BUILD_DIR)/hostapd/.config
+ $(CP) ./files/hostapd-$(LOCAL_VARIANT).config $(PKG_BUILD_DIR)/hostapd/.config
+ $(CP) ./files/wpa_supplicant-$(LOCAL_VARIANT).config $(PKG_BUILD_DIR)/wpa_supplicant/.config
endef
TARGET_CPPFLAGS := \
@@ -108,30 +206,108 @@ ifdef CONFIG_PACKAGE_kmod-mac80211
TARGET_LDFLAGS += -lm -lnl-tiny
endif
-define Build/Compile
+define Build/RunMake
CFLAGS="$(TARGET_CPPFLAGS) $(TARGET_CFLAGS)" \
- $(MAKE) -C $(PKG_BUILD_DIR)/hostapd \
+ $(MAKE) -C $(PKG_BUILD_DIR)/$(1) \
$(TARGET_CONFIGURE_OPTS) \
$(DRIVER_MAKEOPTS) \
LIBS="$(TARGET_LDFLAGS)" \
- hostapd hostapd_cli
+ $(2)
endef
-define Package/hostapd/install
+define Build/Compile/wpad
+ echo ` \
+ $(call Build/RunMake,hostapd,MULTICALL=1 dump_cflags); \
+ $(call Build/RunMake,wpa_supplicant,dump_cflags) | sed -e 's,$(TARGET_CFLAGS),,' \
+ ` > $(PKG_BUILD_DIR)/.cflags
+ $(call Build/RunMake,hostapd, \
+ CFLAGS="$$$$(cat $(PKG_BUILD_DIR)/.cflags)" \
+ MULTICALL=1 \
+ hostapd_cli hostapd_multi.a \
+ )
+ $(call Build/RunMake,wpa_supplicant, \
+ CFLAGS="$$$$(cat $(PKG_BUILD_DIR)/.cflags)" \
+ MULTICALL=1 \
+ wpa_cli wpa_supplicant_multi.a \
+ )
+ $(TARGET_CC) -o $(PKG_BUILD_DIR)/wpad \
+ $(TARGET_CFLAGS) \
+ ./files/multicall.c \
+ $(PKG_BUILD_DIR)/hostapd/hostapd_multi.a \
+ $(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant_multi.a \
+ $(TARGET_LDFLAGS)
+endef
+
+define Build/Compile/hostapd
+ $(call Build/RunMake,hostapd, \
+ hostapd hostapd_cli \
+ )
+endef
+
+define Build/Compile/supplicant
+ $(call Build/RunMake,wpa_supplicant, \
+ wpa_cli wpa_supplicant \
+ )
+endef
+
+define Build/Compile
+ $(Build/Compile/$(LOCAL_TYPE))
+endef
+
+define Install/hostapd
$(INSTALL_DIR) $(1)/etc/hotplug.d/net
$(INSTALL_DATA) ./files/hostapd.hotplug $(1)/etc/hotplug.d/net/
$(INSTALL_DIR) $(1)/lib/wifi
$(INSTALL_DATA) ./files/hostapd.sh $(1)/lib/wifi/hostapd.sh
$(INSTALL_DIR) $(1)/usr/sbin
+endef
+
+define Install/supplicant
+ $(INSTALL_DIR) $(1)/lib/wifi
+ $(INSTALL_DATA) ./files/wpa_supplicant.sh $(1)/lib/wifi/wpa_supplicant.sh
+ $(INSTALL_DIR) $(1)/usr/sbin
+endef
+
+define Package/hostapd/install
+ $(call Install/hostapd,$(1))
$(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd/hostapd $(1)/usr/sbin/
endef
Package/hostapd-mini/install = $(Package/hostapd/install)
-define Package/hostapd-utils/install
+ifneq ($(LOCAL_TYPE),supplicant)
+ define Package/hostapd-utils/install
$(INSTALL_DIR) $(1)/usr/sbin
$(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd/hostapd_cli $(1)/usr/sbin/
+ endef
+endif
+
+define Package/wpad/install
+ $(call Install/hostapd,$(1))
+ $(call Install/supplicant,$(1))
+ $(INSTALL_BIN) $(PKG_BUILD_DIR)/wpad $(1)/usr/sbin/
+ ln -sf wpad $(1)/usr/sbin/hostapd
+ ln -sf wpad $(1)/usr/sbin/wpa_supplicant
+endef
+Package/wpad-mini/install = $(Package/wpad/install)
+
+define Package/wpa-supplicant/install
+ $(call Install/supplicant,$(1))
+ $(INSTALL_BIN) $(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant $(1)/usr/sbin/
endef
+Package/wpa-supplicant-mini/install = $(Package/wpa-supplicant/install)
+
+ifneq ($(LOCAL_VARIANT),hostapd)
+ define Package/wpa-cli/install
+ $(INSTALL_DIR) $(1)/usr/sbin
+ $(CP) $(PKG_BUILD_DIR)/wpa_supplicant/wpa_cli $(1)/usr/sbin/
+ endef
+endif
$(eval $(call BuildPackage,hostapd))
$(eval $(call BuildPackage,hostapd-mini))
+$(eval $(call BuildPackage,wpad))
+$(eval $(call BuildPackage,wpad-mini))
+$(eval $(call BuildPackage,wpa-supplicant))
+$(eval $(call BuildPackage,wpa-supplicant-mini))
+$(eval $(call BuildPackage,wpa-cli))
$(eval $(call BuildPackage,hostapd-utils))
diff --git a/package/hostapd/files/full.config b/package/hostapd/files/hostapd-full.config
index 07c924f..07c924f 100644
--- a/package/hostapd/files/full.config
+++ b/package/hostapd/files/hostapd-full.config
diff --git a/package/hostapd/files/mini.config b/package/hostapd/files/hostapd-mini.config
index 1720ddd..1720ddd 100644
--- a/package/hostapd/files/mini.config
+++ b/package/hostapd/files/hostapd-mini.config
diff --git a/package/hostapd/files/multicall.c b/package/hostapd/files/multicall.c
new file mode 100644
index 0000000..c8e814b
--- /dev/null
+++ b/package/hostapd/files/multicall.c
@@ -0,0 +1,28 @@
+#include <stdio.h>
+#include <string.h>
+#include <stdbool.h>
+
+extern int hostapd_main(int argc, char **argv);
+extern int wpa_supplicant_main(int argc, char **argv);
+
+int main(int argc, char **argv)
+{
+ bool restart = false;
+ const char *prog = argv[0];
+
+restart:
+ if (strstr(argv[0], "hostapd"))
+ return hostapd_main(argc, argv);
+ else if (strstr(argv[0], "wpa_supplicant"))
+ return wpa_supplicant_main(argc, argv);
+
+ if (!restart && argc > 1) {
+ argv++;
+ argc--;
+ restart = true;
+ goto restart;
+ }
+
+ fprintf(stderr, "Invalid command.\nUsage: %s wpa_supplicant|hostapd [<arguments>]\n", prog);
+ return 255;
+}
diff --git a/package/hostapd/files/wpa_supplicant-full.config b/package/hostapd/files/wpa_supplicant-full.config
new file mode 100644
index 0000000..5e7fd27
--- /dev/null
+++ b/package/hostapd/files/wpa_supplicant-full.config
@@ -0,0 +1,404 @@
+# Example wpa_supplicant build time configuration
+#
+# This file lists the configuration options that are used when building the
+# hostapd binary. All lines starting with # are ignored. Configuration option
+# lines must be commented out complete, if they are not to be included, i.e.,
+# just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cases, these lines should use += in order not
+# to override previous values of the variables.
+
+
+# Uncomment following two lines and fix the paths if you have installed OpenSSL
+# or GnuTLS in non-default location
+#CFLAGS += -I/usr/local/openssl/include
+#LIBS += -L/usr/local/openssl/lib
+
+# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
+# the kerberos files are not in the default include path. Following line can be
+# used to fix build issues on such systems (krb5.h not found).
+#CFLAGS += -I/usr/include/kerberos
+
+# Example configuration for various cross-compilation platforms
+
+#### sveasoft (e.g., for Linksys WRT54G) ######################################
+#CC=mipsel-uclibc-gcc
+#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
+#CFLAGS += -Os
+#CPPFLAGS += -I../src/include -I../../src/router/openssl/include
+#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl
+###############################################################################
+
+#### openwrt (e.g., for Linksys WRT54G) #######################################
+#CC=mipsel-uclibc-gcc
+#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
+#CFLAGS += -Os
+#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \
+# -I../WRT54GS/release/src/include
+#LIBS = -lssl
+###############################################################################
+
+
+# Driver interface for Host AP driver
+CONFIG_DRIVER_HOSTAP=y
+
+# Driver interface for Agere driver
+#CONFIG_DRIVER_HERMES=y
+# Change include directories to match with the local setup
+#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
+#CFLAGS += -I../../include/wireless
+
+# Driver interface for madwifi driver
+# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
+#CONFIG_DRIVER_MADWIFI=y
+# Set include directory to the madwifi source tree
+#CFLAGS += -I../../madwifi
+
+# Driver interface for ndiswrapper
+# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
+#CONFIG_DRIVER_NDISWRAPPER=y
+
+# Driver interface for Atmel driver
+# CONFIG_DRIVER_ATMEL=y
+
+# Driver interface for old Broadcom driver
+# Please note that the newer Broadcom driver ("hybrid Linux driver") supports
+# Linux wireless extensions and does not need (or even work) with the old
+# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver.
+#CONFIG_DRIVER_BROADCOM=y
+# Example path for wlioctl.h; change to match your configuration
+#CFLAGS += -I/opt/WRT54GS/release/src/include
+
+# Driver interface for Intel ipw2100/2200 driver
+# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
+#CONFIG_DRIVER_IPW=y
+
+# Driver interface for Ralink driver
+#CONFIG_DRIVER_RALINK=y
+
+# Driver interface for generic Linux wireless extensions
+CONFIG_DRIVER_WEXT=y
+
+# Driver interface for Linux drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=y
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+#LIBS_p += -L/usr/local/lib
+#LIBS_c += -L/usr/local/lib
+
+# Driver interface for Windows NDIS
+#CONFIG_DRIVER_NDIS=y
+#CFLAGS += -I/usr/include/w32api/ddk
+#LIBS += -L/usr/local/lib
+# For native build using mingw
+#CONFIG_NATIVE_WINDOWS=y
+# Additional directories for cross-compilation on Linux host for mingw target
+#CFLAGS += -I/opt/mingw/mingw32/include/ddk
+#LIBS += -L/opt/mingw/mingw32/lib
+#CC=mingw32-gcc
+# By default, driver_ndis uses WinPcap for low-level operations. This can be
+# replaced with the following option which replaces WinPcap calls with NDISUIO.
+# However, this requires that WZC is disabled (net stop wzcsvc) before starting
+# wpa_supplicant.
+# CONFIG_USE_NDISUIO=y
+
+# Driver interface for development testing
+#CONFIG_DRIVER_TEST=y
+
+# Include client MLME (management frame processing) for test driver
+# This can be used to test MLME operations in hostapd with the test interface.
+# space.
+#CONFIG_CLIENT_MLME=y
+
+# Driver interface for wired Ethernet drivers
+CONFIG_DRIVER_WIRED=y
+
+# Driver interface for the Broadcom RoboSwitch family
+#CONFIG_DRIVER_ROBOSWITCH=y
+
+# Driver interface for no driver (e.g., WPS ER only)
+#CONFIG_DRIVER_NONE=y
+
+# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
+# included)
+CONFIG_IEEE8021X_EAPOL=y
+
+# EAP-MD5
+CONFIG_EAP_MD5=y
+
+# EAP-MSCHAPv2
+CONFIG_EAP_MSCHAPV2=y
+
+# EAP-TLS
+CONFIG_EAP_TLS=y
+
+# EAL-PEAP
+CONFIG_EAP_PEAP=y
+
+# EAP-TTLS
+CONFIG_EAP_TTLS=y
+
+# EAP-FAST
+# Note: Default OpenSSL package does not include support for all the
+# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
+# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch)
+# to add the needed functions.
+#CONFIG_EAP_FAST=y
+
+# EAP-GTC
+CONFIG_EAP_GTC=y
+
+# EAP-OTP
+CONFIG_EAP_OTP=y
+
+# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
+#CONFIG_EAP_SIM=y
+
+# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# EAP-PAX
+#CONFIG_EAP_PAX=y
+
+# LEAP
+CONFIG_EAP_LEAP=y
+
+# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
+#CONFIG_EAP_AKA=y
+
+# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
+# This requires CONFIG_EAP_AKA to be enabled, too.
+#CONFIG_EAP_AKA_PRIME=y
+
+# Enable USIM simulator (Milenage) for EAP-AKA
+#CONFIG_USIM_SIMULATOR=y
+
+# EAP-SAKE
+#CONFIG_EAP_SAKE=y
+
+# EAP-GPSK
+#CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+#CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-TNC and related Trusted Network Connect support (experimental)
+#CONFIG_EAP_TNC=y
+
+# Wi-Fi Protected Setup (WPS)
+#CONFIG_WPS=y
+
+# EAP-IKEv2
+#CONFIG_EAP_IKEV2=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+CONFIG_PKCS12=y
+
+# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
+# engine.
+CONFIG_SMARTCARD=y
+
+# PC/SC interface for smartcards (USIM, GSM SIM)
+# Enable this if EAP-SIM or EAP-AKA is included
+#CONFIG_PCSC=y
+
+# Development testing
+#CONFIG_EAPOL_TEST=y
+
+# Select control interface backend for external programs, e.g, wpa_cli:
+# unix = UNIX domain sockets (default for Linux/*BSD)
+# udp = UDP sockets using localhost (127.0.0.1)
+# named_pipe = Windows Named Pipe (default for Windows)
+# y = use default (backwards compatibility)
+# If this option is commented out, control interface is not included in the
+# build.
+CONFIG_CTRL_IFACE=y
+
+# Include support for GNU Readline and History Libraries in wpa_cli.
+# When building a wpa_cli binary for distribution, please note that these
+# libraries are licensed under GPL and as such, BSD license may not apply for
+# the resulting binary.
+#CONFIG_READLINE=y
+
+# Remove debugging code that is printing out debug message to stdout.
+# This can be used to reduce the size of the wpa_supplicant considerably
+# if debugging code is not needed. The size reduction can be around 35%
+# (e.g., 90 kB).
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
+# 35-50 kB in code size.
+#CONFIG_NO_WPA=y
+
+# Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to
+# save about 1 kB in code size when building only WPA-Personal (no EAP support)
+# or 6 kB if building for WPA-Enterprise.
+#CONFIG_NO_WPA2=y
+
+# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
+# This option can be used to reduce code size by removing support for
+# converting ASCII passphrases into PSK. If this functionality is removed, the
+# PSK can only be configured as the 64-octet hexstring (e.g., from
+# wpa_passphrase). This saves about 0.5 kB in code size.
+#CONFIG_NO_WPA_PASSPHRASE=y
+
+# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
+# This can be used if ap_scan=1 mode is never enabled.
+#CONFIG_NO_SCAN_PROCESSING=y
+
+# Select configuration backend:
+# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
+# path is given on command line, not here; this option is just used to
+# select the backend that allows configuration files to be used)
+# winreg = Windows registry (see win_example.reg for an example)
+CONFIG_BACKEND=file
+
+# Remove configuration write functionality (i.e., to allow the configuration
+# file to be updated based on runtime configuration changes). The runtime
+# configuration can still be changed, the changes are just not going to be
+# persistent over restarts. This option can be used to reduce code size by
+# about 3.5 kB.
+#CONFIG_NO_CONFIG_WRITE=y
+
+# Remove support for configuration blobs to reduce code size by about 1.5 kB.
+#CONFIG_NO_CONFIG_BLOBS=y
+
+# Select program entry point implementation:
+# main = UNIX/POSIX like main() function (default)
+# main_winsvc = Windows service (read parameters from registry)
+# main_none = Very basic example (development use only)
+#CONFIG_MAIN=main
+
+# Select wrapper for operatins system and C library specific functions
+# unix = UNIX/POSIX like systems (default)
+# win32 = Windows systems
+# none = Empty template
+#CONFIG_OS=unix
+
+# Select event loop implementation
+# eloop = select() loop (default)
+# eloop_win = Windows events and WaitForMultipleObject() loop
+# eloop_none = Empty template
+#CONFIG_ELOOP=eloop
+
+# Select layer 2 packet implementation
+# linux = Linux packet socket (default)
+# pcap = libpcap/libdnet/WinPcap
+# freebsd = FreeBSD libpcap
+# winpcap = WinPcap with receive thread
+# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
+# none = Empty template
+#CONFIG_L2_PACKET=linux
+
+# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
+CONFIG_PEERKEY=y
+
+# IEEE 802.11w (management frame protection)
+# This version is an experimental implementation based on IEEE 802.11w/D1.0
+# draft and is subject to change since the standard has not yet been finalized.
+# Driver support is also needed for IEEE 802.11w.
+#CONFIG_IEEE80211W=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA)
+# internal = Internal TLSv1 implementation (experimental)
+# none = Empty template
+CONFIG_TLS=internal
+
+# Whether to enable TLS/IA support, which is required for EAP-TTLSv1.
+# You need CONFIG_TLS=gnutls for this to have any effect. Please note that
+# even though the core GnuTLS library is released under LGPL, this extra
+# library uses GPL and as such, the terms of GPL apply to the combination
+# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not
+# apply for distribution of the resulting binary.
+#CONFIG_GNUTLS_EXTRA=y
+
+# If CONFIG_TLS=internal is used, additional library and include paths are
+# needed for LibTomMath. Alternatively, an integrated, minimal version of
+# LibTomMath can be used. See beginning of libtommath.c for details on benefits
+# and drawbacks of this option.
+CONFIG_INTERNAL_LIBTOMMATH=y
+#ifndef CONFIG_INTERNAL_LIBTOMMATH
+#LTM_PATH=/usr/src/libtommath-0.39
+#CFLAGS += -I$(LTM_PATH)
+#LIBS += -L$(LTM_PATH)
+#LIBS_p += -L$(LTM_PATH)
+#endif
+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
+# can be configured to include faster routines for exptmod, sqr, and div to
+# speed up DH and RSA calculation considerably
+CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
+# This is only for Windows builds and requires WMI-related header files and
+# WbemUuid.Lib from Platform SDK even when building with MinGW.
+#CONFIG_NDIS_EVENTS_INTEGRATED=y
+#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
+
+# Add support for old DBus control interface
+# (fi.epitest.hostap.WPASupplicant)
+#CONFIG_CTRL_IFACE_DBUS=y
+
+# Add support for new DBus control interface
+# (fi.w1.hostap.wpa_supplicant1)
+#CONFIG_CTRL_IFACE_DBUS_NEW=y
+
+# Add introspection support for new DBus control interface
+#CONFIG_CTRL_IFACE_DBUS_INTRO=y
+
+# Add support for loading EAP methods dynamically as shared libraries.
+# When this option is enabled, each EAP method can be either included
+# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
+# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
+# be loaded in the beginning of the wpa_supplicant configuration file
+# (see load_dynamic_eap parameter in the example file) before being used in
+# the network blocks.
+#
+# Note that some shared parts of EAP methods are included in the main program
+# and in order to be able to use dynamic EAP methods using these parts, the
+# main program must have been build with the EAP method enabled (=y or =dyn).
+# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
+# unless at least one of them was included in the main build to force inclusion
+# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
+# in the main build to be able to load these methods dynamically.
+#
+# Please also note that using dynamic libraries will increase the total binary
+# size. Thus, it may not be the best option for targets that have limited
+# amount of memory/flash.
+#CONFIG_DYNAMIC_EAP_METHODS=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition)
+#CONFIG_IEEE80211R=y
+
+# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
+#CONFIG_DEBUG_FILE=y
+
+# Enable privilege separation (see README 'Privilege separation' for details)
+#CONFIG_PRIVSEP=y
+
+# Enable mitigation against certain attacks against TKIP by delaying Michael
+# MIC error reports by a random amount of time between 0 and 60 seconds
+#CONFIG_DELAYED_MIC_ERROR_REPORT=y
+
+# Enable tracing code for developer debugging
+# This tracks use of memory allocations and other registrations and reports
+# incorrect use with a backtrace of call (or allocation) location.
+#CONFIG_WPA_TRACE=y
+# For BSD, comment out these.
+#LIBS += -lexecinfo
+#LIBS_p += -lexecinfo
+#LIBS_c += -lexecinfo
+
+# Use libbfd to get more details for developer debugging
+# This enables use of libbfd to get more detailed symbols for the backtraces
+# generated by CONFIG_WPA_TRACE=y.
+#CONFIG_WPA_TRACE_BFD=y
+# For BSD, comment out these.
+#LIBS += -lbfd -liberty -lz
+#LIBS_p += -lbfd -liberty -lz
+#LIBS_c += -lbfd -liberty -lz
diff --git a/package/hostapd/files/wpa_supplicant-mini.config b/package/hostapd/files/wpa_supplicant-mini.config
new file mode 100644
index 0000000..843b64a
--- /dev/null
+++ b/package/hostapd/files/wpa_supplicant-mini.config
@@ -0,0 +1,404 @@
+# Example wpa_supplicant build time configuration
+#
+# This file lists the configuration options that are used when building the
+# hostapd binary. All lines starting with # are ignored. Configuration option
+# lines must be commented out complete, if they are not to be included, i.e.,
+# just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cases, these lines should use += in order not
+# to override previous values of the variables.
+
+
+# Uncomment following two lines and fix the paths if you have installed OpenSSL
+# or GnuTLS in non-default location
+#CFLAGS += -I/usr/local/openssl/include
+#LIBS += -L/usr/local/openssl/lib
+
+# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
+# the kerberos files are not in the default include path. Following line can be
+# used to fix build issues on such systems (krb5.h not found).
+#CFLAGS += -I/usr/include/kerberos
+
+# Example configuration for various cross-compilation platforms
+
+#### sveasoft (e.g., for Linksys WRT54G) ######################################
+#CC=mipsel-uclibc-gcc
+#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
+#CFLAGS += -Os
+#CPPFLAGS += -I../src/include -I../../src/router/openssl/include
+#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl
+###############################################################################
+
+#### openwrt (e.g., for Linksys WRT54G) #######################################
+#CC=mipsel-uclibc-gcc
+#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
+#CFLAGS += -Os
+#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \
+# -I../WRT54GS/release/src/include
+#LIBS = -lssl
+###############################################################################
+
+
+# Driver interface for Host AP driver
+CONFIG_DRIVER_HOSTAP=y
+
+# Driver interface for Agere driver
+#CONFIG_DRIVER_HERMES=y
+# Change include directories to match with the local setup
+#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
+#CFLAGS += -I../../include/wireless
+
+# Driver interface for madwifi driver
+# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
+#CONFIG_DRIVER_MADWIFI=y
+# Set include directory to the madwifi source tree
+#CFLAGS += -I../../madwifi
+
+# Driver interface for ndiswrapper
+# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
+#CONFIG_DRIVER_NDISWRAPPER=y
+
+# Driver interface for Atmel driver
+# CONFIG_DRIVER_ATMEL=y
+
+# Driver interface for old Broadcom driver
+# Please note that the newer Broadcom driver ("hybrid Linux driver") supports
+# Linux wireless extensions and does not need (or even work) with the old
+# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver.
+#CONFIG_DRIVER_BROADCOM=y
+# Example path for wlioctl.h; change to match your configuration
+#CFLAGS += -I/opt/WRT54GS/release/src/include
+
+# Driver interface for Intel ipw2100/2200 driver
+# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
+#CONFIG_DRIVER_IPW=y
+
+# Driver interface for Ralink driver
+#CONFIG_DRIVER_RALINK=y
+
+# Driver interface for generic Linux wireless extensions
+CONFIG_DRIVER_WEXT=y
+
+# Driver interface for Linux drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=y
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+#LIBS_p += -L/usr/local/lib
+#LIBS_c += -L/usr/local/lib
+
+# Driver interface for Windows NDIS
+#CONFIG_DRIVER_NDIS=y
+#CFLAGS += -I/usr/include/w32api/ddk
+#LIBS += -L/usr/local/lib
+# For native build using mingw
+#CONFIG_NATIVE_WINDOWS=y
+# Additional directories for cross-compilation on Linux host for mingw target
+#CFLAGS += -I/opt/mingw/mingw32/include/ddk
+#LIBS += -L/opt/mingw/mingw32/lib
+#CC=mingw32-gcc
+# By default, driver_ndis uses WinPcap for low-level operations. This can be
+# replaced with the following option which replaces WinPcap calls with NDISUIO.
+# However, this requires that WZC is disabled (net stop wzcsvc) before starting
+# wpa_supplicant.
+# CONFIG_USE_NDISUIO=y
+
+# Driver interface for development testing
+#CONFIG_DRIVER_TEST=y
+
+# Include client MLME (management frame processing) for test driver
+# This can be used to test MLME operations in hostapd with the test interface.
+# space.
+#CONFIG_CLIENT_MLME=y
+
+# Driver interface for wired Ethernet drivers
+CONFIG_DRIVER_WIRED=y
+
+# Driver interface for the Broadcom RoboSwitch family
+#CONFIG_DRIVER_ROBOSWITCH=y
+
+# Driver interface for no driver (e.g., WPS ER only)
+#CONFIG_DRIVER_NONE=y
+
+# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
+# included)
+# CONFIG_IEEE8021X_EAPOL=y
+
+# EAP-MD5
+# CONFIG_EAP_MD5=y
+
+# EAP-MSCHAPv2
+# CONFIG_EAP_MSCHAPV2=y
+
+# EAP-TLS
+# CONFIG_EAP_TLS=y
+
+# EAL-PEAP
+# CONFIG_EAP_PEAP=y
+
+# EAP-TTLS
+# CONFIG_EAP_TTLS=y
+
+# EAP-FAST
+# Note: Default OpenSSL package does not include support for all the
+# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
+# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch)
+# to add the needed functions.
+#CONFIG_EAP_FAST=y
+
+# EAP-GTC
+# CONFIG_EAP_GTC=y
+
+# EAP-OTP
+# CONFIG_EAP_OTP=y
+
+# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
+#CONFIG_EAP_SIM=y
+
+# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# EAP-PAX
+#CONFIG_EAP_PAX=y
+
+# LEAP
+# CONFIG_EAP_LEAP=y
+
+# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
+#CONFIG_EAP_AKA=y
+
+# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
+# This requires CONFIG_EAP_AKA to be enabled, too.
+#CONFIG_EAP_AKA_PRIME=y
+
+# Enable USIM simulator (Milenage) for EAP-AKA
+#CONFIG_USIM_SIMULATOR=y
+
+# EAP-SAKE
+#CONFIG_EAP_SAKE=y
+
+# EAP-GPSK
+#CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+#CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-TNC and related Trusted Network Connect support (experimental)
+#CONFIG_EAP_TNC=y
+
+# Wi-Fi Protected Setup (WPS)
+#CONFIG_WPS=y
+
+# EAP-IKEv2
+#CONFIG_EAP_IKEV2=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+# CONFIG_PKCS12=y
+
+# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
+# engine.
+# CONFIG_SMARTCARD=y
+
+# PC/SC interface for smartcards (USIM, GSM SIM)
+# Enable this if EAP-SIM or EAP-AKA is included
+#CONFIG_PCSC=y
+
+# Development testing
+#CONFIG_EAPOL_TEST=y
+
+# Select control interface backend for external programs, e.g, wpa_cli:
+# unix = UNIX domain sockets (default for Linux/*BSD)
+# udp = UDP sockets using localhost (127.0.0.1)
+# named_pipe = Windows Named Pipe (default for Windows)
+# y = use default (backwards compatibility)
+# If this option is commented out, control interface is not included in the
+# build.
+CONFIG_CTRL_IFACE=y
+
+# Include support for GNU Readline and History Libraries in wpa_cli.
+# When building a wpa_cli binary for distribution, please note that these
+# libraries are licensed under GPL and as such, BSD license may not apply for
+# the resulting binary.
+#CONFIG_READLINE=y
+
+# Remove debugging code that is printing out debug message to stdout.
+# This can be used to reduce the size of the wpa_supplicant considerably
+# if debugging code is not needed. The size reduction can be around 35%
+# (e.g., 90 kB).
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
+# 35-50 kB in code size.
+#CONFIG_NO_WPA=y
+
+# Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to
+# save about 1 kB in code size when building only WPA-Personal (no EAP support)
+# or 6 kB if building for WPA-Enterprise.
+#CONFIG_NO_WPA2=y
+
+# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
+# This option can be used to reduce code size by removing support for
+# converting ASCII passphrases into PSK. If this functionality is removed, the
+# PSK can only be configured as the 64-octet hexstring (e.g., from
+# wpa_passphrase). This saves about 0.5 kB in code size.
+#CONFIG_NO_WPA_PASSPHRASE=y
+
+# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
+# This can be used if ap_scan=1 mode is never enabled.
+#CONFIG_NO_SCAN_PROCESSING=y
+
+# Select configuration backend:
+# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
+# path is given on command line, not here; this option is just used to
+# select the backend that allows configuration files to be used)
+# winreg = Windows registry (see win_example.reg for an example)
+CONFIG_BACKEND=file
+
+# Remove configuration write functionality (i.e., to allow the configuration
+# file to be updated based on runtime configuration changes). The runtime
+# configuration can still be changed, the changes are just not going to be
+# persistent over restarts. This option can be used to reduce code size by
+# about 3.5 kB.
+#CONFIG_NO_CONFIG_WRITE=y
+
+# Remove support for configuration blobs to reduce code size by about 1.5 kB.
+#CONFIG_NO_CONFIG_BLOBS=y
+
+# Select program entry point implementation:
+# main = UNIX/POSIX like main() function (default)
+# main_winsvc = Windows service (read parameters from registry)
+# main_none = Very basic example (development use only)
+#CONFIG_MAIN=main
+
+# Select wrapper for operatins system and C library specific functions
+# unix = UNIX/POSIX like systems (default)
+# win32 = Windows systems
+# none = Empty template
+#CONFIG_OS=unix
+
+# Select event loop implementation
+# eloop = select() loop (default)
+# eloop_win = Windows events and WaitForMultipleObject() loop
+# eloop_none = Empty template
+#CONFIG_ELOOP=eloop
+
+# Select layer 2 packet implementation
+# linux = Linux packet socket (default)
+# pcap = libpcap/libdnet/WinPcap
+# freebsd = FreeBSD libpcap
+# winpcap = WinPcap with receive thread
+# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
+# none = Empty template
+#CONFIG_L2_PACKET=linux
+
+# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
+# CONFIG_PEERKEY=y
+
+# IEEE 802.11w (management frame protection)
+# This version is an experimental implementation based on IEEE 802.11w/D1.0
+# draft and is subject to change since the standard has not yet been finalized.
+# Driver support is also needed for IEEE 802.11w.
+#CONFIG_IEEE80211W=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA)
+# internal = Internal TLSv1 implementation (experimental)
+# none = Empty template
+CONFIG_TLS=internal
+
+# Whether to enable TLS/IA support, which is required for EAP-TTLSv1.
+# You need CONFIG_TLS=gnutls for this to have any effect. Please note that
+# even though the core GnuTLS library is released under LGPL, this extra
+# library uses GPL and as such, the terms of GPL apply to the combination
+# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not
+# apply for distribution of the resulting binary.
+#CONFIG_GNUTLS_EXTRA=y
+
+# If CONFIG_TLS=internal is used, additional library and include paths are
+# needed for LibTomMath. Alternatively, an integrated, minimal version of
+# LibTomMath can be used. See beginning of libtommath.c for details on benefits
+# and drawbacks of this option.
+#CONFIG_INTERNAL_LIBTOMMATH=y
+#ifndef CONFIG_INTERNAL_LIBTOMMATH
+#LTM_PATH=/usr/src/libtommath-0.39
+#CFLAGS += -I$(LTM_PATH)
+#LIBS += -L$(LTM_PATH)
+#LIBS_p += -L$(LTM_PATH)
+#endif
+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
+# can be configured to include faster routines for exptmod, sqr, and div to
+# speed up DH and RSA calculation considerably
+#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
+# This is only for Windows builds and requires WMI-related header files and
+# WbemUuid.Lib from Platform SDK even when building with MinGW.
+#CONFIG_NDIS_EVENTS_INTEGRATED=y
+#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
+
+# Add support for old DBus control interface
+# (fi.epitest.hostap.WPASupplicant)
+#CONFIG_CTRL_IFACE_DBUS=y
+
+# Add support for new DBus control interface
+# (fi.w1.hostap.wpa_supplicant1)
+#CONFIG_CTRL_IFACE_DBUS_NEW=y
+
+# Add introspection support for new DBus control interface
+#CONFIG_CTRL_IFACE_DBUS_INTRO=y
+
+# Add support for loading EAP methods dynamically as shared libraries.
+# When this option is enabled, each EAP method can be either included
+# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
+# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
+# be loaded in the beginning of the wpa_supplicant configuration file
+# (see load_dynamic_eap parameter in the example file) before being used in
+# the network blocks.
+#
+# Note that some shared parts of EAP methods are included in the main program
+# and in order to be able to use dynamic EAP methods using these parts, the
+# main program must have been build with the EAP method enabled (=y or =dyn).
+# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
+# unless at least one of them was included in the main build to force inclusion
+# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
+# in the main build to be able to load these methods dynamically.
+#
+# Please also note that using dynamic libraries will increase the total binary
+# size. Thus, it may not be the best option for targets that have limited
+# amount of memory/flash.
+#CONFIG_DYNAMIC_EAP_METHODS=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition)
+#CONFIG_IEEE80211R=y
+
+# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
+#CONFIG_DEBUG_FILE=y
+
+# Enable privilege separation (see README 'Privilege separation' for details)
+#CONFIG_PRIVSEP=y
+
+# Enable mitigation against certain attacks against TKIP by delaying Michael
+# MIC error reports by a random amount of time between 0 and 60 seconds
+#CONFIG_DELAYED_MIC_ERROR_REPORT=y
+
+# Enable tracing code for developer debugging
+# This tracks use of memory allocations and other registrations and reports
+# incorrect use with a backtrace of call (or allocation) location.
+#CONFIG_WPA_TRACE=y
+# For BSD, comment out these.
+#LIBS += -lexecinfo
+#LIBS_p += -lexecinfo
+#LIBS_c += -lexecinfo
+
+# Use libbfd to get more details for developer debugging
+# This enables use of libbfd to get more detailed symbols for the backtraces
+# generated by CONFIG_WPA_TRACE=y.
+#CONFIG_WPA_TRACE_BFD=y
+# For BSD, comment out these.
+#LIBS += -lbfd -liberty -lz
+#LIBS_p += -lbfd -liberty -lz
+#LIBS_c += -lbfd -liberty -lz
diff --git a/package/hostapd/files/wpa_supplicant.sh b/package/hostapd/files/wpa_supplicant.sh
new file mode 100644
index 0000000..8f7f503
--- /dev/null
+++ b/package/hostapd/files/wpa_supplicant.sh
@@ -0,0 +1,117 @@
+wpa_supplicant_setup_vif() {
+ local vif="$1"
+ local driver="$2"
+ local key="$key"
+
+ # wpa_supplicant should use wext for mac80211 cards
+ [ "$driver" = "mac80211" ] && driver='wext'
+
+ # make sure we have the psk
+ [ -n "$key" ] || {
+ config_get key "$vif" key
+ }
+
+ case "$enc" in
+ *wep*)
+ key_mgmt='NONE'
+ config_get key "$vif" key
+ key="${key:-1}"
+ case "$key" in
+ [1234])
+ for idx in 1 2 3 4; do
+ local zidx
+ zidx=$(($idx - 1))
+ config_get ckey "$vif" "key${idx}"
+ [ -n "$ckey" ] && \
+ append "wep_key${zidx}" "wep_key${zidx}=$(prepare_key_wep "$ckey")"
+ done
+ wep_tx_keyidx="wep_tx_keyidx=$((key - 1))"
+ ;;
+ *)
+ wep_key0="wep_key0=$(prepare_key_wep "$key")"
+ wep_tx_keyidx="wep_tx_keyidx=0"
+ ;;
+ esac
+ ;;
+ *psk*)
+ key_mgmt='WPA-PSK'
+ config_get_bool usepassphrase "$vif" passphrase 1
+ case "$enc" in
+ *psk2*)
+ proto='proto=RSN'
+ if [ "$usepassphrase" = "1" ]; then
+ passphrase="psk=\"${key}\""
+ else
+ passphrase="psk=${key}"
+ fi
+ ;;
+ *psk*)
+ proto='proto=WPA'
+ if [ "$usepassphrase" = "1" ]; then
+ passphrase="psk=\"${key}\""
+ else
+ passphrase="psk=${key}"
+ fi
+ ;;
+ esac
+ ;;
+ *wpa*|*8021x*)
+ proto='proto=WPA2'
+ key_mgmt='WPA-EAP'
+ config_get ca_cert "$vif" ca_cert
+ ca_cert=${ca_cert:+"ca_cert=\"$ca_cert\""}
+ case "$eap_type" in
+ tls)
+ pairwise='pairwise=CCMP'
+ group='group=CCMP'
+ config_get priv_key "$vif" priv_key
+ config_get priv_key_pwd "$vif" priv_key_pwd
+ priv_key="private_key=\"$priv_key\""
+ priv_key_pwd="private_key_passwd=\"$priv_key_pwd\""
+ ;;
+ peap|ttls)
+ config_get auth "$vif" auth
+ config_get identity "$vif" identity
+ config_get password "$vif" password
+ phase2="phase2=\"auth=${auth:-MSCHAPV2}\""
+ identity="identity=\"$identity\""
+ password="password=\"$password\""
+ ;;
+ esac
+ eap_type="eap=$(echo $eap_type | tr 'a-z' 'A-Z')"
+ ;;
+ esac
+ config_get ifname "$vif" ifname
+ config_get bridge "$vif" bridge
+ config_get ssid "$vif" ssid
+ config_get bssid "$vif" bssid
+ bssid=${bssid:+"bssid=$bssid"}
+ rm -rf /var/run/wpa_supplicant-$ifname
+ cat > /var/run/wpa_supplicant-$ifname.conf <<EOF
+ctrl_interface=/var/run/wpa_supplicant-$ifname
+network={
+ scan_ssid=1
+ ssid="$ssid"
+ $bssid
+ key_mgmt=$key_mgmt
+ $proto
+ $passphrase
+ $pairwise
+ $group
+ $eap_type
+ $ca_cert
+ $priv_key
+ $priv_key_pwd
+ $phase2
+ $identity
+ $password
+ $wep_key0
+ $wep_key1
+ $wep_key2
+ $wep_key3
+ $wep_tx_keyidx
+}
+EOF
+ [ -z "$proto" -a "$key_mgmt" != "NONE" ] || \
+ wpa_supplicant ${bridge:+ -b $bridge} -B -P "/var/run/wifi-${ifname}.pid" -D ${driver:-wext} -i "$ifname" -c /var/run/wpa_supplicant-$ifname.conf
+}
diff --git a/package/hostapd/patches/200-multicall.patch b/package/hostapd/patches/200-multicall.patch
new file mode 100644
index 0000000..fbbba20
--- /dev/null
+++ b/package/hostapd/patches/200-multicall.patch
@@ -0,0 +1,236 @@
+--- a/hostapd/Makefile
++++ b/hostapd/Makefile
+@@ -14,6 +14,7 @@ CFLAGS += -I../src/utils
+ # CFLAGS += -DUSE_KERNEL_HEADERS -I/usr/src/linux/include
+
+ -include .config
++-include $(if $(MULTICALL), ../wpa_supplicant/.config)
+
+ ifndef CONFIG_OS
+ ifdef CONFIG_NATIVE_WINDOWS
+@@ -157,10 +158,14 @@ ifdef CONFIG_IEEE80211N
+ CFLAGS += -DCONFIG_IEEE80211N
+ endif
+
++ifndef MULTICALL
++CFLAGS += -DNO_SUPPLICANT
++endif
++
+ include ../src/drivers/drivers.mak
+-OBJS += $(DRV_AP_OBJS)
+-CFLAGS += $(DRV_AP_CFLAGS)
+-LDFLAGS += $(DRV_AP_LDFLAGS)
++OBJS += $(sort $(DRV_AP_OBJS) $(if $(MULTICALL),$(DRV_WPA_OBJS)))
++CFLAGS += $(DRV_AP_CFLAGS) $(if $(MULTICALL),$(DRV_WPA_CFLAGS))
++LDFLAGS += $(DRV_AP_LDFLAGS) $(if $(MULTICALL),$(DRV_WPA_LDFLAGS))
+ LIBS += $(DRV_AP_LIBS)
+
+ ifdef CONFIG_L2_PACKET
+@@ -738,6 +743,12 @@ install: all
+
+ BCHECK=../src/drivers/build.hostapd
+
++hostapd_multi.a: $(BCHECK) $(OBJS)
++ $(Q)$(CC) -c -o hostapd_multi.o -Dmain=hostapd_main $(CFLAGS) main.c
++ @$(E) " CC " $<
++ @rm -f $@
++ @$(AR) cr $@ hostapd_multi.o $(OBJS)
++
+ hostapd: $(BCHECK) $(OBJS)
+ $(CC) $(LDFLAGS) -o hostapd $(OBJS) $(LIBS)
+
+@@ -776,6 +787,12 @@ HOBJS += ../src/crypto/aes-internal.o
+ HOBJS += ../src/crypto/aes-internal-enc.o
+ endif
+
++dump_cflags:
++ @echo -n $(CFLAGS) " "
++
++dump_ldflags:
++ @echo -n $(LDFLAGS) $(LIBS) $(EXTRALIBS) " "
++
+ nt_password_hash: $(NOBJS)
+ $(CC) $(LDFLAGS) -o nt_password_hash $(NOBJS) $(LIBS_n)
+
+--- a/wpa_supplicant/Makefile
++++ b/wpa_supplicant/Makefile
+@@ -52,6 +52,7 @@ OBJS_p += ../src/utils/wpabuf.o
+ OBJS_c = wpa_cli.o ../src/common/wpa_ctrl.o
+
+ -include .config
++-include $(if $(MULTICALL),../hostapd/.config)
+
+ ifndef CONFIG_OS
+ ifdef CONFIG_NATIVE_WINDOWS
+@@ -579,6 +580,10 @@ ifdef CONFIG_DYNAMIC_EAP_METHODS
+ CFLAGS += -DCONFIG_DYNAMIC_EAP_METHODS
+ LIBS += -ldl -rdynamic
+ endif
++else
++ ifdef MULTICALL
++ OBJS += ../src/eap_common/eap_common.o
++ endif
+ endif
+
+ ifdef CONFIG_AP
+@@ -631,6 +636,12 @@ CFLAGS += -DEAP_SERVER_WSC
+ OBJS += ../src/ap/wps_hostapd.o
+ OBJS += ../src/eap_server/eap_wsc.o
+ endif
++else
++ ifdef MULTICALL
++ OBJS += ../src/eap_server/eap.o
++ OBJS += ../src/eap_server/eap_identity.o
++ OBJS += ../src/eap_server/eap_methods.o
++ endif
+ endif
+
+ ifdef NEED_RSN_AUTHENTICATOR
+@@ -1260,6 +1271,12 @@ BCHECK=../src/drivers/build.wpa_supplica
+ wpa_priv: $(BCHECK) $(OBJS_priv)
+ $(LDO) $(LDFLAGS) -o wpa_priv $(OBJS_priv) $(LIBS)
+
++wpa_supplicant_multi.a: .config $(BCHECK) $(OBJS) $(EXTRA_progs)
++ $(Q)$(CC) -c -o wpa_supplicant_multi.o -Dmain=wpa_supplicant_main $(CFLAGS) main.c
++ @$(E) " CC " $<
++ @rm -f $@
++ @$(AR) cr $@ wpa_supplicant_multi.o $(OBJS)
++
+ wpa_supplicant: .config $(BCHECK) $(OBJS) $(EXTRA_progs)
+ $(LDO) $(LDFLAGS) -o wpa_supplicant $(OBJS) $(LIBS) $(EXTRALIBS)
+
+@@ -1319,6 +1336,12 @@ endif
+ $(Q)$(CC) -c -o $@ $(CFLAGS) $<
+ @$(E) " CC " $<
+
++dump_cflags:
++ @echo -n $(CFLAGS) " "
++
++dump_ldflags:
++ @echo -n $(LDFLAGS) $(LIBS) $(EXTRALIBS) " "
++
+ wpa_supplicant.exe: wpa_supplicant
+ mv -f $< $@
+ wpa_cli.exe: wpa_cli
+--- a/src/drivers/driver.h
++++ b/src/drivers/driver.h
+@@ -2384,8 +2384,8 @@ union wpa_event_data {
+ * Driver wrapper code should call this function whenever an event is received
+ * from the driver.
+ */
+-void wpa_supplicant_event(void *ctx, enum wpa_event_type event,
+- union wpa_event_data *data);
++extern void (*wpa_supplicant_event)(void *ctx, enum wpa_event_type event,
++ union wpa_event_data *data);
+
+
+ /*
+--- a/src/ap/drv_callbacks.c
++++ b/src/ap/drv_callbacks.c
+@@ -337,8 +337,8 @@ static void hostapd_event_eapol_rx(struc
+ }
+
+
+-void wpa_supplicant_event(void *ctx, enum wpa_event_type event,
+- union wpa_event_data *data)
++void hostapd_wpa_event(void *ctx, enum wpa_event_type event,
++ union wpa_event_data *data)
+ {
+ struct hostapd_data *hapd = ctx;
+
+@@ -415,5 +415,6 @@ void wpa_supplicant_event(void *ctx, enu
+ break;
+ }
+ }
+-
+ #endif /* HOSTAPD */
++
++
+--- a/wpa_supplicant/wpa_priv.c
++++ b/wpa_supplicant/wpa_priv.c
+@@ -825,8 +825,8 @@ static void wpa_priv_send_ft_response(st
+ }
+
+
+-void wpa_supplicant_event(void *ctx, wpa_event_type event,
+- union wpa_event_data *data)
++static void supplicant_event(void *ctx, wpa_event_type event,
++ union wpa_event_data *data)
+ {
+ struct wpa_priv_interface *iface = ctx;
+
+@@ -968,6 +968,7 @@ int main(int argc, char *argv[])
+ if (os_program_init())
+ return -1;
+
++ wpa_supplicant_event = supplicant_event;
+ wpa_priv_fd_workaround();
+
+ for (;;) {
+--- a/wpa_supplicant/events.c
++++ b/wpa_supplicant/events.c
+@@ -1425,8 +1425,8 @@ static void wpa_supplicant_event_ibss_rs
+ #endif /* CONFIG_IBSS_RSN */
+
+
+-void wpa_supplicant_event(void *ctx, enum wpa_event_type event,
+- union wpa_event_data *data)
++void supplicant_event(void *ctx, enum wpa_event_type event,
++ union wpa_event_data *data)
+ {
+ struct wpa_supplicant *wpa_s = ctx;
+
+--- a/wpa_supplicant/wpa_supplicant.c
++++ b/wpa_supplicant/wpa_supplicant.c
+@@ -2215,6 +2215,9 @@ struct wpa_supplicant * wpa_supplicant_g
+ return NULL;
+ }
+
++extern void supplicant_event(void *ctx, enum wpa_event_type event,
++ union wpa_event_data *data);
++
+
+ /**
+ * wpa_supplicant_init - Initialize %wpa_supplicant
+@@ -2233,6 +2236,7 @@ struct wpa_global * wpa_supplicant_init(
+ if (params == NULL)
+ return NULL;
+
++ wpa_supplicant_event = supplicant_event;
+ wpa_debug_open_file(params->wpa_debug_file_path);
+ if (params->wpa_debug_syslog)
+ wpa_debug_open_syslog();
+--- a/hostapd/main.c
++++ b/hostapd/main.c
+@@ -478,6 +478,9 @@ static void usage(void)
+ exit(1);
+ }
+
++void hostapd_wpa_event(void *ctx, enum wpa_event_type event,
++ union wpa_event_data *data);
++
+
+ int main(int argc, char *argv[])
+ {
+@@ -489,6 +492,7 @@ int main(int argc, char *argv[])
+ if (os_program_init())
+ return -1;
+
++ wpa_supplicant_event = hostapd_wpa_event;
+ for (;;) {
+ c = getopt(argc, argv, "BdhKP:tv");
+ if (c < 0)
+--- a/src/drivers/drivers.c
++++ b/src/drivers/drivers.c
+@@ -13,7 +13,11 @@
+ */
+
+ #include "includes.h"
++#include "common.h"
++#include "driver.h"
+
++void (*wpa_supplicant_event)(void *ctx, enum wpa_event_type event,
++ union wpa_event_data *data);
+
+ #ifdef CONFIG_DRIVER_WEXT
+ extern struct wpa_driver_ops wpa_driver_wext_ops; /* driver_wext.c */
diff --git a/package/hostapd/patches/300-timestamp_check.patch b/package/hostapd/patches/300-timestamp_check.patch
new file mode 100644
index 0000000..fef63e3
--- /dev/null
+++ b/package/hostapd/patches/300-timestamp_check.patch
@@ -0,0 +1,15 @@
+--- a/src/tls/x509v3.c
++++ b/src/tls/x509v3.c
+@@ -1832,8 +1832,11 @@ int x509_certificate_chain_validate(stru
+ if (chain_trusted)
+ continue;
+
+- if ((unsigned long) now.sec <
++ if (
++#ifndef NO_TIMESTAMP_CHECK
++ (unsigned long) now.sec <
+ (unsigned long) cert->not_before ||
++#endif
+ (unsigned long) now.sec >
+ (unsigned long) cert->not_after) {
+ wpa_printf(MSG_INFO, "X509: Certificate not valid "
diff --git a/package/hostapd/patches/310-scan_ssid.patch b/package/hostapd/patches/310-scan_ssid.patch
new file mode 100644
index 0000000..5a7e10f
--- /dev/null
+++ b/package/hostapd/patches/310-scan_ssid.patch
@@ -0,0 +1,37 @@
+--- a/wpa_supplicant/scan.c
++++ b/wpa_supplicant/scan.c
+@@ -215,6 +215,7 @@ static void wpa_supplicant_scan(void *el
+ enum wps_request_type req_type = WPS_REQ_ENROLLEE_INFO;
+ #endif /* CONFIG_WPS */
+ struct wpa_driver_scan_params params;
++ int scan_ssid_all = 1;
+ size_t max_ssids;
+
+ if (wpa_s->disconnected && !wpa_s->scan_req) {
+@@ -275,6 +276,16 @@ static void wpa_supplicant_scan(void *el
+ wpa_s->wpa_state == WPA_INACTIVE)
+ wpa_supplicant_set_state(wpa_s, WPA_SCANNING);
+
++ /* check if all configured ssids should be scanned directly */
++ ssid = wpa_s->conf->ssid;
++ while (ssid) {
++ if (!ssid->scan_ssid) {
++ scan_ssid_all = 0;
++ break;
++ }
++ ssid = ssid->next;
++ }
++
+ /* Find the starting point from which to continue scanning */
+ ssid = wpa_s->conf->ssid;
+ if (wpa_s->prev_scan_ssid != WILDCARD_SSID_SCAN) {
+@@ -336,6 +347,9 @@ static void wpa_supplicant_scan(void *el
+ int_array_sort_unique(params.freqs);
+ }
+
++ if (scan_ssid_all && !ssid)
++ ssid = wpa_s->conf->ssid;
++
+ if (ssid) {
+ wpa_s->prev_scan_ssid = ssid;
+ if (max_ssids > 1) {
diff --git a/package/hostapd/patches/320-rescan_immediately.patch b/package/hostapd/patches/320-rescan_immediately.patch
new file mode 100644
index 0000000..a4020bc
--- /dev/null
+++ b/package/hostapd/patches/320-rescan_immediately.patch
@@ -0,0 +1,11 @@
+--- a/wpa_supplicant/events.c
++++ b/wpa_supplicant/events.c
+@@ -843,7 +843,7 @@ static void wpa_supplicant_event_scan_re
+ wpa_printf(MSG_DEBUG, "Setup a new network");
+ wpa_supplicant_associate(wpa_s, NULL, ssid);
+ } else
+- wpa_supplicant_req_new_scan(wpa_s, 5);
++ wpa_supplicant_req_new_scan(wpa_s, 0);
+ }
+ }
+ #endif /* CONFIG_NO_SCAN_PROCESSING */
diff --git a/package/hostapd/patches/330-madwifi_merge.patch b/package/hostapd/patches/330-madwifi_merge.patch
new file mode 100644
index 0000000..e3a89d1
--- /dev/null
+++ b/package/hostapd/patches/330-madwifi_merge.patch
@@ -0,0 +1,767 @@
+--- a/src/drivers/driver_madwifi.c
++++ b/src/drivers/driver_madwifi.c
+@@ -71,7 +71,6 @@
+
+ #define WPA_KEY_RSC_LEN 8
+
+-#ifdef HOSTAPD
+
+ #include "priv_netlink.h"
+ #include "netlink.h"
+@@ -82,17 +81,22 @@
+ struct madwifi_driver_data {
+ struct hostapd_data *hapd; /* back pointer */
+
+- char iface[IFNAMSIZ + 1];
++ void *wext; /* private data for driver_wext */
++ void *ctx;
++ char ifname[IFNAMSIZ + 1];
++ int ioctl_sock; /* socket for ioctl() use */
++
++#ifdef HOSTAPD
+ int ifindex;
+ struct l2_packet_data *sock_xmit; /* raw packet xmit socket */
+ struct l2_packet_data *sock_recv; /* raw packet recv socket */
+- int ioctl_sock; /* socket for ioctl() use */
+ struct netlink_data *netlink;
+ int we_version;
+ u8 acct_mac[ETH_ALEN];
+ struct hostap_sta_driver_data acct_data;
+
+ struct l2_packet_data *sock_raw; /* raw 802.11 management frames */
++#endif
+ };
+
+ static int madwifi_sta_deauth(void *priv, const u8 *own_addr, const u8 *addr,
+@@ -105,7 +109,7 @@ set80211priv(struct madwifi_driver_data
+ int do_inline = len < IFNAMSIZ;
+
+ memset(&iwr, 0, sizeof(iwr));
+- os_strlcpy(iwr.ifr_name, drv->iface, IFNAMSIZ);
++ os_strlcpy(iwr.ifr_name, drv->ifname, IFNAMSIZ);
+ #ifdef IEEE80211_IOCTL_FILTERFRAME
+ /* FILTERFRAME must be NOT inline, regardless of size. */
+ if (op == IEEE80211_IOCTL_FILTERFRAME)
+@@ -206,7 +210,7 @@ set80211param(struct madwifi_driver_data
+ struct iwreq iwr;
+
+ memset(&iwr, 0, sizeof(iwr));
+- os_strlcpy(iwr.ifr_name, drv->iface, IFNAMSIZ);
++ os_strlcpy(iwr.ifr_name, drv->ifname, IFNAMSIZ);
+ iwr.u.mode = op;
+ memcpy(iwr.u.name+sizeof(__u32), &arg, sizeof(arg));
+
+@@ -233,6 +237,7 @@ ether_sprintf(const u8 *addr)
+ }
+ #endif /* CONFIG_NO_STDOUT_DEBUG */
+
++#ifdef HOSTAPD
+ /*
+ * Configure WPA parameters.
+ */
+@@ -395,7 +400,7 @@ madwifi_sta_set_flags(void *priv, const
+ return madwifi_set_sta_authorized(priv, addr, 0);
+ return 0;
+ }
+-
++#endif /* HOSTAPD */
+ static int
+ madwifi_del_key(void *priv, const u8 *addr, int key_idx)
+ {
+@@ -407,28 +412,20 @@ madwifi_del_key(void *priv, const u8 *ad
+ __func__, ether_sprintf(addr), key_idx);
+
+ memset(&wk, 0, sizeof(wk));
++ wk.idk_keyix = key_idx;
+ if (addr != NULL) {
+ memcpy(wk.idk_macaddr, addr, IEEE80211_ADDR_LEN);
+- wk.idk_keyix = (u8) IEEE80211_KEYIX_NONE;
+- } else {
+- wk.idk_keyix = key_idx;
+- }
+-
+- ret = set80211priv(drv, IEEE80211_IOCTL_DELKEY, &wk, sizeof(wk));
+- if (ret < 0) {
+- wpa_printf(MSG_DEBUG, "%s: Failed to delete key (addr %s"
+- " key_idx %d)", __func__, ether_sprintf(addr),
+- key_idx);
+ }
+
+- return ret;
++ set80211priv(drv, IEEE80211_IOCTL_DELKEY, &wk, sizeof(wk));
++ return 0;
+ }
+
+ static int
+-wpa_driver_madwifi_set_key(const char *ifname, void *priv, enum wpa_alg alg,
+- const u8 *addr, int key_idx, int set_tx,
+- const u8 *seq, size_t seq_len,
+- const u8 *key, size_t key_len)
++madwifi_set_key(const char *ifname, void *priv, enum wpa_alg alg,
++ const u8 *addr, int key_idx, int set_tx,
++ const u8 *seq, size_t seq_len,
++ const u8 *key, size_t key_len)
+ {
+ struct madwifi_driver_data *drv = priv;
+ struct ieee80211req_key wk;
+@@ -462,10 +459,14 @@ wpa_driver_madwifi_set_key(const char *i
+ memset(&wk, 0, sizeof(wk));
+ wk.ik_type = cipher;
+ wk.ik_flags = IEEE80211_KEY_RECV | IEEE80211_KEY_XMIT;
++
+ if (addr == NULL) {
+ memset(wk.ik_macaddr, 0xff, IEEE80211_ADDR_LEN);
+ wk.ik_keyix = key_idx;
+ wk.ik_flags |= IEEE80211_KEY_DEFAULT;
++ } else if (!memcmp(addr, "\xff\xff\xff\xff\xff\xff", ETH_ALEN)) {
++ wk.ik_flags |= IEEE80211_KEY_GROUP;
++ memcpy(wk.ik_macaddr, addr, IEEE80211_ADDR_LEN);
+ } else {
+ memcpy(wk.ik_macaddr, addr, IEEE80211_ADDR_LEN);
+ wk.ik_keyix = IEEE80211_KEYIX_NONE;
+@@ -485,6 +486,7 @@ wpa_driver_madwifi_set_key(const char *i
+ }
+
+
++#ifdef HOSTAPD
+ static int
+ madwifi_get_seqnum(const char *ifname, void *priv, const u8 *addr, int idx,
+ u8 *seq)
+@@ -591,7 +593,7 @@ madwifi_read_sta_driver_data(void *priv,
+
+ memset(data, 0, sizeof(*data));
+ snprintf(buf, sizeof(buf), "/proc/net/madwifi/%s/" MACSTR,
+- drv->iface, MAC2STR(addr));
++ drv->ifname, MAC2STR(addr));
+
+ f = fopen(buf, "r");
+ if (!f) {
+@@ -757,7 +759,7 @@ static int madwifi_receive_probe_req(str
+ if (ret)
+ return ret;
+
+- drv->sock_raw = l2_packet_init(drv->iface, NULL, ETH_P_80211_RAW,
++ drv->sock_raw = l2_packet_init(drv->ifname, NULL, ETH_P_80211_RAW,
+ madwifi_raw_receive, drv, 1);
+ if (drv->sock_raw == NULL)
+ return -1;
+@@ -1017,7 +1019,7 @@ madwifi_get_we_version(struct madwifi_dr
+ return -1;
+
+ memset(&iwr, 0, sizeof(iwr));
+- os_strlcpy(iwr.ifr_name, drv->iface, IFNAMSIZ);
++ os_strlcpy(iwr.ifr_name, drv->ifname, IFNAMSIZ);
+ iwr.u.data.pointer = (caddr_t) range;
+ iwr.u.data.length = buflen;
+
+@@ -1134,17 +1136,17 @@ madwifi_init(struct hostapd_data *hapd,
+ perror("socket[PF_INET,SOCK_DGRAM]");
+ goto bad;
+ }
+- memcpy(drv->iface, params->ifname, sizeof(drv->iface));
++ memcpy(drv->ifname, params->ifname, sizeof(drv->ifname));
+
+ memset(&ifr, 0, sizeof(ifr));
+- os_strlcpy(ifr.ifr_name, drv->iface, sizeof(ifr.ifr_name));
++ os_strlcpy(ifr.ifr_name, drv->ifname, sizeof(ifr.ifr_name));
+ if (ioctl(drv->ioctl_sock, SIOCGIFINDEX, &ifr) != 0) {
+ perror("ioctl(SIOCGIFINDEX)");
+ goto bad;
+ }
+ drv->ifindex = ifr.ifr_ifindex;
+
+- drv->sock_xmit = l2_packet_init(drv->iface, NULL, ETH_P_EAPOL,
++ drv->sock_xmit = l2_packet_init(drv->ifname, NULL, ETH_P_EAPOL,
+ handle_read, drv, 1);
+ if (drv->sock_xmit == NULL)
+ goto bad;
+@@ -1158,7 +1160,7 @@ madwifi_init(struct hostapd_data *hapd,
+ 1);
+ if (drv->sock_recv == NULL)
+ goto bad;
+- } else if (linux_br_get(brname, drv->iface) == 0) {
++ } else if (linux_br_get(brname, drv->ifname) == 0) {
+ wpa_printf(MSG_DEBUG, "Interface in bridge %s; configure for "
+ "EAPOL receive", brname);
+ drv->sock_recv = l2_packet_init(brname, NULL, ETH_P_EAPOL,
+@@ -1169,7 +1171,7 @@ madwifi_init(struct hostapd_data *hapd,
+ drv->sock_recv = drv->sock_xmit;
+
+ memset(&iwr, 0, sizeof(iwr));
+- os_strlcpy(iwr.ifr_name, drv->iface, IFNAMSIZ);
++ os_strlcpy(iwr.ifr_name, drv->ifname, IFNAMSIZ);
+
+ iwr.u.mode = IW_MODE_MASTER;
+
+@@ -1179,7 +1181,7 @@ madwifi_init(struct hostapd_data *hapd,
+ goto bad;
+ }
+
+- madwifi_set_privacy(drv->iface, drv, 0); /* default to no privacy */
++ madwifi_set_privacy(drv->ifname, drv, 0); /* default to no privacy */
+
+ madwifi_receive_probe_req(drv);
+
+@@ -1204,7 +1206,7 @@ madwifi_deinit(void *priv)
+ struct madwifi_driver_data *drv = priv;
+
+ netlink_deinit(drv->netlink);
+- (void) linux_set_iface_flags(drv->ioctl_sock, drv->iface, 0);
++ (void) linux_set_iface_flags(drv->ioctl_sock, drv->ifname, 0);
+ if (drv->ioctl_sock >= 0)
+ close(drv->ioctl_sock);
+ if (drv->sock_recv != NULL && drv->sock_recv != drv->sock_xmit)
+@@ -1223,7 +1225,7 @@ madwifi_set_ssid(const char *ifname, voi
+ struct iwreq iwr;
+
+ memset(&iwr, 0, sizeof(iwr));
+- os_strlcpy(iwr.ifr_name, drv->iface, IFNAMSIZ);
++ os_strlcpy(iwr.ifr_name, drv->ifname, IFNAMSIZ);
+ iwr.u.essid.flags = 1; /* SSID active */
+ iwr.u.essid.pointer = (caddr_t) buf;
+ iwr.u.essid.length = len + 1;
+@@ -1244,7 +1246,7 @@ madwifi_get_ssid(const char *ifname, voi
+ int ret = 0;
+
+ memset(&iwr, 0, sizeof(iwr));
+- os_strlcpy(iwr.ifr_name, drv->iface, IFNAMSIZ);
++ os_strlcpy(iwr.ifr_name, drv->ifname, IFNAMSIZ);
+ iwr.u.essid.pointer = (caddr_t) buf;
+ iwr.u.essid.length = len;
+
+@@ -1271,137 +1273,16 @@ madwifi_commit(void *priv)
+ return 0;
+ }
+
+-#else /* HOSTAPD */
++#endif /* HOSTAPD */
+
+-struct wpa_driver_madwifi_data {
+- void *wext; /* private data for driver_wext */
+- void *ctx;
+- char ifname[IFNAMSIZ + 1];
+- int sock;
+-};
++#if !defined(NO_SUPPLICANT)
+
+ static int wpa_driver_madwifi_set_auth_alg(void *priv, int auth_alg);
+ static int wpa_driver_madwifi_set_probe_req_ie(void *priv, const u8 *ies,
+ size_t ies_len);
+
+-
+-static int
+-set80211priv(struct wpa_driver_madwifi_data *drv, int op, void *data, int len,
+- int show_err)
+-{
+- struct iwreq iwr;
+-
+- os_memset(&iwr, 0, sizeof(iwr));
+- os_strlcpy(iwr.ifr_name, drv->ifname, IFNAMSIZ);
+- if (len < IFNAMSIZ &&
+- op != IEEE80211_IOCTL_SET_APPIEBUF) {
+- /*
+- * Argument data fits inline; put it there.
+- */
+- os_memcpy(iwr.u.name, data, len);
+- } else {
+- /*
+- * Argument data too big for inline transfer; setup a
+- * parameter block instead; the kernel will transfer
+- * the data for the driver.
+- */
+- iwr.u.data.pointer = data;
+- iwr.u.data.length = len;
+- }
+-
+- if (ioctl(drv->sock, op, &iwr) < 0) {
+- if (show_err) {
+-#ifdef MADWIFI_NG
+- int first = IEEE80211_IOCTL_SETPARAM;
+- int last = IEEE80211_IOCTL_KICKMAC;
+- static const char *opnames[] = {
+- "ioctl[IEEE80211_IOCTL_SETPARAM]",
+- "ioctl[IEEE80211_IOCTL_GETPARAM]",
+- "ioctl[IEEE80211_IOCTL_SETMODE]",
+- "ioctl[IEEE80211_IOCTL_GETMODE]",
+- "ioctl[IEEE80211_IOCTL_SETWMMPARAMS]",
+- "ioctl[IEEE80211_IOCTL_GETWMMPARAMS]",
+- "ioctl[IEEE80211_IOCTL_SETCHANLIST]",
+- "ioctl[IEEE80211_IOCTL_GETCHANLIST]",
+- "ioctl[IEEE80211_IOCTL_CHANSWITCH]",
+- NULL,
+- "ioctl[IEEE80211_IOCTL_SET_APPIEBUF]",
+- "ioctl[IEEE80211_IOCTL_GETSCANRESULTS]",
+- NULL,
+- "ioctl[IEEE80211_IOCTL_GETCHANINFO]",
+- "ioctl[IEEE80211_IOCTL_SETOPTIE]",
+- "ioctl[IEEE80211_IOCTL_GETOPTIE]",
+- "ioctl[IEEE80211_IOCTL_SETMLME]",
+- NULL,
+- "ioctl[IEEE80211_IOCTL_SETKEY]",
+- NULL,
+- "ioctl[IEEE80211_IOCTL_DELKEY]",
+- NULL,
+- "ioctl[IEEE80211_IOCTL_ADDMAC]",
+- NULL,
+- "ioctl[IEEE80211_IOCTL_DELMAC]",
+- NULL,
+- "ioctl[IEEE80211_IOCTL_WDSMAC]",
+- NULL,
+- "ioctl[IEEE80211_IOCTL_WDSDELMAC]",
+- NULL,
+- "ioctl[IEEE80211_IOCTL_KICKMAC]",
+- };
+-#else /* MADWIFI_NG */
+- int first = IEEE80211_IOCTL_SETPARAM;
+- int last = IEEE80211_IOCTL_CHANLIST;
+- static const char *opnames[] = {
+- "ioctl[IEEE80211_IOCTL_SETPARAM]",
+- "ioctl[IEEE80211_IOCTL_GETPARAM]",
+- "ioctl[IEEE80211_IOCTL_SETKEY]",
+- "ioctl[IEEE80211_IOCTL_GETKEY]",
+- "ioctl[IEEE80211_IOCTL_DELKEY]",
+- NULL,
+- "ioctl[IEEE80211_IOCTL_SETMLME]",
+- NULL,
+- "ioctl[IEEE80211_IOCTL_SETOPTIE]",
+- "ioctl[IEEE80211_IOCTL_GETOPTIE]",
+- "ioctl[IEEE80211_IOCTL_ADDMAC]",
+- NULL,
+- "ioctl[IEEE80211_IOCTL_DELMAC]",
+- NULL,
+- "ioctl[IEEE80211_IOCTL_CHANLIST]",
+- };
+-#endif /* MADWIFI_NG */
+- int idx = op - first;
+- if (first <= op && op <= last &&
+- idx < (int) (sizeof(opnames) / sizeof(opnames[0]))
+- && opnames[idx])
+- perror(opnames[idx]);
+- else
+- perror("ioctl[unknown???]");
+- }
+- return -1;
+- }
+- return 0;
+-}
+-
+ static int
+-set80211param(struct wpa_driver_madwifi_data *drv, int op, int arg,
+- int show_err)
+-{
+- struct iwreq iwr;
+-
+- os_memset(&iwr, 0, sizeof(iwr));
+- os_strlcpy(iwr.ifr_name, drv->ifname, IFNAMSIZ);
+- iwr.u.mode = op;
+- os_memcpy(iwr.u.name+sizeof(u32), &arg, sizeof(arg));
+-
+- if (ioctl(drv->sock, IEEE80211_IOCTL_SETPARAM, &iwr) < 0) {
+- if (show_err)
+- perror("ioctl[IEEE80211_IOCTL_SETPARAM]");
+- return -1;
+- }
+- return 0;
+-}
+-
+-static int
+-wpa_driver_madwifi_set_wpa_ie(struct wpa_driver_madwifi_data *drv,
++wpa_driver_madwifi_set_wpa_ie(struct madwifi_driver_data *drv,
+ const u8 *wpa_ie, size_t wpa_ie_len)
+ {
+ struct iwreq iwr;
+@@ -1412,7 +1293,7 @@ wpa_driver_madwifi_set_wpa_ie(struct wpa
+ iwr.u.data.pointer = (void *) wpa_ie;
+ iwr.u.data.length = wpa_ie_len;
+
+- if (ioctl(drv->sock, IEEE80211_IOCTL_SETOPTIE, &iwr) < 0) {
++ if (ioctl(drv->ioctl_sock, IEEE80211_IOCTL_SETOPTIE, &iwr) < 0) {
+ perror("ioctl[IEEE80211_IOCTL_SETOPTIE]");
+ return -1;
+ }
+@@ -1420,156 +1301,51 @@ wpa_driver_madwifi_set_wpa_ie(struct wpa
+ }
+
+ static int
+-wpa_driver_madwifi_del_key(struct wpa_driver_madwifi_data *drv, int key_idx,
+- const u8 *addr)
+-{
+- struct ieee80211req_del_key wk;
+-
+- wpa_printf(MSG_DEBUG, "%s: keyidx=%d", __FUNCTION__, key_idx);
+- os_memset(&wk, 0, sizeof(wk));
+- wk.idk_keyix = key_idx;
+- if (addr != NULL)
+- os_memcpy(wk.idk_macaddr, addr, IEEE80211_ADDR_LEN);
+-
+- return set80211priv(drv, IEEE80211_IOCTL_DELKEY, &wk, sizeof(wk), 1);
+-}
+-
+-static int
+-wpa_driver_madwifi_set_key(const char *ifname, void *priv, enum wpa_alg alg,
+- const u8 *addr, int key_idx, int set_tx,
+- const u8 *seq, size_t seq_len,
+- const u8 *key, size_t key_len)
+-{
+- struct wpa_driver_madwifi_data *drv = priv;
+- struct ieee80211req_key wk;
+- char *alg_name;
+- u_int8_t cipher;
+-
+- if (alg == WPA_ALG_NONE)
+- return wpa_driver_madwifi_del_key(drv, key_idx, addr);
+-
+- switch (alg) {
+- case WPA_ALG_WEP:
+- if (addr == NULL || os_memcmp(addr, "\xff\xff\xff\xff\xff\xff",
+- ETH_ALEN) == 0) {
+- /*
+- * madwifi did not seem to like static WEP key
+- * configuration with IEEE80211_IOCTL_SETKEY, so use
+- * Linux wireless extensions ioctl for this.
+- */
+- return wpa_driver_wext_set_key(ifname, drv->wext, alg,
+- addr, key_idx, set_tx,
+- seq, seq_len,
+- key, key_len);
+- }
+- alg_name = "WEP";
+- cipher = IEEE80211_CIPHER_WEP;
+- break;
+- case WPA_ALG_TKIP:
+- alg_name = "TKIP";
+- cipher = IEEE80211_CIPHER_TKIP;
+- break;
+- case WPA_ALG_CCMP:
+- alg_name = "CCMP";
+- cipher = IEEE80211_CIPHER_AES_CCM;
+- break;
+- default:
+- wpa_printf(MSG_DEBUG, "%s: unknown/unsupported algorithm %d",
+- __FUNCTION__, alg);
+- return -1;
+- }
+-
+- wpa_printf(MSG_DEBUG, "%s: alg=%s key_idx=%d set_tx=%d seq_len=%lu "
+- "key_len=%lu", __FUNCTION__, alg_name, key_idx, set_tx,
+- (unsigned long) seq_len, (unsigned long) key_len);
+-
+- if (seq_len > sizeof(u_int64_t)) {
+- wpa_printf(MSG_DEBUG, "%s: seq_len %lu too big",
+- __FUNCTION__, (unsigned long) seq_len);
+- return -2;
+- }
+- if (key_len > sizeof(wk.ik_keydata)) {
+- wpa_printf(MSG_DEBUG, "%s: key length %lu too big",
+- __FUNCTION__, (unsigned long) key_len);
+- return -3;
+- }
+-
+- os_memset(&wk, 0, sizeof(wk));
+- wk.ik_type = cipher;
+- wk.ik_flags = IEEE80211_KEY_RECV;
+- if (addr == NULL ||
+- os_memcmp(addr, "\xff\xff\xff\xff\xff\xff", ETH_ALEN) == 0)
+- wk.ik_flags |= IEEE80211_KEY_GROUP;
+- if (set_tx) {
+- wk.ik_flags |= IEEE80211_KEY_XMIT | IEEE80211_KEY_DEFAULT;
+- os_memcpy(wk.ik_macaddr, addr, IEEE80211_ADDR_LEN);
+- } else
+- os_memset(wk.ik_macaddr, 0, IEEE80211_ADDR_LEN);
+- wk.ik_keyix = key_idx;
+- wk.ik_keylen = key_len;
+-#ifdef WORDS_BIGENDIAN
+- {
+- size_t i;
+- u8 tmp[WPA_KEY_RSC_LEN];
+- os_memset(tmp, 0, sizeof(tmp));
+- for (i = 0; i < seq_len; i++)
+- tmp[WPA_KEY_RSC_LEN - i - 1] = seq[i];
+- os_memcpy(&wk.ik_keyrsc, tmp, WPA_KEY_RSC_LEN);
+- }
+-#else /* WORDS_BIGENDIAN */
+- os_memcpy(&wk.ik_keyrsc, seq, seq_len);
+-#endif /* WORDS_BIGENDIAN */
+- os_memcpy(wk.ik_keydata, key, key_len);
+-
+- return set80211priv(drv, IEEE80211_IOCTL_SETKEY, &wk, sizeof(wk), 1);
+-}
+-
+-static int
+ wpa_driver_madwifi_set_countermeasures(void *priv, int enabled)
+ {
+- struct wpa_driver_madwifi_data *drv = priv;
++ struct madwifi_driver_data *drv = priv;
+ wpa_printf(MSG_DEBUG, "%s: enabled=%d", __FUNCTION__, enabled);
+- return set80211param(drv, IEEE80211_PARAM_COUNTERMEASURES, enabled, 1);
++ return set80211param(drv, IEEE80211_PARAM_COUNTERMEASURES, enabled);
+ }
+
+ static int
+ wpa_driver_madwifi_deauthenticate(void *priv, const u8 *addr, int reason_code)
+ {
+- struct wpa_driver_madwifi_data *drv = priv;
++ struct madwifi_driver_data *drv = priv;
+ struct ieee80211req_mlme mlme;
+
+ wpa_printf(MSG_DEBUG, "%s", __FUNCTION__);
+ mlme.im_op = IEEE80211_MLME_DEAUTH;
+ mlme.im_reason = reason_code;
+ os_memcpy(mlme.im_macaddr, addr, IEEE80211_ADDR_LEN);
+- return set80211priv(drv, IEEE80211_IOCTL_SETMLME, &mlme, sizeof(mlme), 1);
++ return set80211priv(drv, IEEE80211_IOCTL_SETMLME, &mlme, sizeof(mlme));
+ }
+
+ static int
+ wpa_driver_madwifi_disassociate(void *priv, const u8 *addr, int reason_code)
+ {
+- struct wpa_driver_madwifi_data *drv = priv;
++ struct madwifi_driver_data *drv = priv;
+ struct ieee80211req_mlme mlme;
+
+ wpa_printf(MSG_DEBUG, "%s", __FUNCTION__);
+ mlme.im_op = IEEE80211_MLME_DISASSOC;
+ mlme.im_reason = reason_code;
+ os_memcpy(mlme.im_macaddr, addr, IEEE80211_ADDR_LEN);
+- return set80211priv(drv, IEEE80211_IOCTL_SETMLME, &mlme, sizeof(mlme), 1);
++ return set80211priv(drv, IEEE80211_IOCTL_SETMLME, &mlme, sizeof(mlme));
+ }
+
+ static int
+ wpa_driver_madwifi_associate(void *priv,
+ struct wpa_driver_associate_params *params)
+ {
+- struct wpa_driver_madwifi_data *drv = priv;
++ struct madwifi_driver_data *drv = priv;
+ struct ieee80211req_mlme mlme;
+ int ret = 0, privacy = 1;
+
+ wpa_printf(MSG_DEBUG, "%s", __FUNCTION__);
+
+ if (set80211param(drv, IEEE80211_PARAM_DROPUNENCRYPTED,
+- params->drop_unencrypted, 1) < 0)
++ params->drop_unencrypted) < 0)
+ ret = -1;
+ if (wpa_driver_madwifi_set_auth_alg(drv, params->auth_alg) < 0)
+ ret = -1;
+@@ -1592,12 +1368,12 @@ wpa_driver_madwifi_associate(void *priv,
+ params->wpa_ie_len == 0)
+ privacy = 0;
+
+- if (set80211param(drv, IEEE80211_PARAM_PRIVACY, privacy, 1) < 0)
++ if (set80211param(drv, IEEE80211_PARAM_PRIVACY, privacy) < 0)
+ ret = -1;
+
+ if (params->wpa_ie_len &&
+ set80211param(drv, IEEE80211_PARAM_WPA,
+- params->wpa_ie[0] == WLAN_EID_RSN ? 2 : 1, 1) < 0)
++ params->wpa_ie[0] == WLAN_EID_RSN ? 2 : 1) < 0)
+ ret = -1;
+
+ if (params->bssid == NULL) {
+@@ -1605,14 +1381,14 @@ wpa_driver_madwifi_associate(void *priv,
+ * roaming */
+ /* FIX: this does not seem to work; would probably need to
+ * change something in the driver */
+- if (set80211param(drv, IEEE80211_PARAM_ROAMING, 0, 1) < 0)
++ if (set80211param(drv, IEEE80211_PARAM_ROAMING, 0) < 0)
+ ret = -1;
+
+ if (wpa_driver_wext_set_ssid(drv->wext, params->ssid,
+ params->ssid_len) < 0)
+ ret = -1;
+ } else {
+- if (set80211param(drv, IEEE80211_PARAM_ROAMING, 2, 1) < 0)
++ if (set80211param(drv, IEEE80211_PARAM_ROAMING, 2) < 0)
+ ret = -1;
+ if (wpa_driver_wext_set_ssid(drv->wext, params->ssid,
+ params->ssid_len) < 0)
+@@ -1621,7 +1397,7 @@ wpa_driver_madwifi_associate(void *priv,
+ mlme.im_op = IEEE80211_MLME_ASSOC;
+ os_memcpy(mlme.im_macaddr, params->bssid, IEEE80211_ADDR_LEN);
+ if (set80211priv(drv, IEEE80211_IOCTL_SETMLME, &mlme,
+- sizeof(mlme), 1) < 0) {
++ sizeof(mlme)) < 0) {
+ wpa_printf(MSG_DEBUG, "%s: SETMLME[ASSOC] failed",
+ __func__);
+ ret = -1;
+@@ -1634,7 +1410,7 @@ wpa_driver_madwifi_associate(void *priv,
+ static int
+ wpa_driver_madwifi_set_auth_alg(void *priv, int auth_alg)
+ {
+- struct wpa_driver_madwifi_data *drv = priv;
++ struct madwifi_driver_data *drv = priv;
+ int authmode;
+
+ if ((auth_alg & WPA_AUTH_ALG_OPEN) &&
+@@ -1645,13 +1421,13 @@ wpa_driver_madwifi_set_auth_alg(void *pr
+ else
+ authmode = IEEE80211_AUTH_OPEN;
+
+- return set80211param(drv, IEEE80211_PARAM_AUTHMODE, authmode, 1);
++ return set80211param(drv, IEEE80211_PARAM_AUTHMODE, authmode);
+ }
+
+ static int
+ wpa_driver_madwifi_scan(void *priv, struct wpa_driver_scan_params *params)
+ {
+- struct wpa_driver_madwifi_data *drv = priv;
++ struct madwifi_driver_data *drv = priv;
+ struct iwreq iwr;
+ int ret = 0;
+ const u8 *ssid = params->ssids[0].ssid;
+@@ -1669,7 +1445,7 @@ wpa_driver_madwifi_scan(void *priv, stru
+ if (wpa_driver_wext_set_ssid(drv->wext, ssid, ssid_len) < 0)
+ ret = -1;
+
+- if (ioctl(drv->sock, SIOCSIWSCAN, &iwr) < 0) {
++ if (ioctl(drv->ioctl_sock, SIOCSIWSCAN, &iwr) < 0) {
+ perror("ioctl[SIOCSIWSCAN]");
+ ret = -1;
+ }
+@@ -1691,14 +1467,14 @@ wpa_driver_madwifi_scan(void *priv, stru
+
+ static int wpa_driver_madwifi_get_bssid(void *priv, u8 *bssid)
+ {
+- struct wpa_driver_madwifi_data *drv = priv;
++ struct madwifi_driver_data *drv = priv;
+ return wpa_driver_wext_get_bssid(drv->wext, bssid);
+ }
+
+
+ static int wpa_driver_madwifi_get_ssid(void *priv, u8 *ssid)
+ {
+- struct wpa_driver_madwifi_data *drv = priv;
++ struct madwifi_driver_data *drv = priv;
+ return wpa_driver_wext_get_ssid(drv->wext, ssid);
+ }
+
+@@ -1706,14 +1482,14 @@ static int wpa_driver_madwifi_get_ssid(v
+ static struct wpa_scan_results *
+ wpa_driver_madwifi_get_scan_results(void *priv)
+ {
+- struct wpa_driver_madwifi_data *drv = priv;
++ struct madwifi_driver_data *drv = priv;
+ return wpa_driver_wext_get_scan_results(drv->wext);
+ }
+
+
+ static int wpa_driver_madwifi_set_operstate(void *priv, int state)
+ {
+- struct wpa_driver_madwifi_data *drv = priv;
++ struct madwifi_driver_data *drv = priv;
+ return wpa_driver_wext_set_operstate(drv->wext, state);
+ }
+
+@@ -1734,7 +1510,7 @@ static int wpa_driver_madwifi_set_probe_
+
+ ret = set80211priv(priv, IEEE80211_IOCTL_SET_APPIEBUF, probe_req_ie,
+ sizeof(struct ieee80211req_getset_appiebuf) +
+- ies_len, 1);
++ ies_len);
+
+ os_free(probe_req_ie);
+
+@@ -1744,7 +1520,7 @@ static int wpa_driver_madwifi_set_probe_
+
+ static void * wpa_driver_madwifi_init(void *ctx, const char *ifname)
+ {
+- struct wpa_driver_madwifi_data *drv;
++ struct madwifi_driver_data *drv;
+
+ drv = os_zalloc(sizeof(*drv));
+ if (drv == NULL)
+@@ -1755,17 +1531,17 @@ static void * wpa_driver_madwifi_init(vo
+
+ drv->ctx = ctx;
+ os_strlcpy(drv->ifname, ifname, sizeof(drv->ifname));
+- drv->sock = socket(PF_INET, SOCK_DGRAM, 0);
+- if (drv->sock < 0)
++ drv->ioctl_sock = socket(PF_INET, SOCK_DGRAM, 0);
++ if (drv->ioctl_sock < 0)
+ goto fail2;
+
+- if (set80211param(drv, IEEE80211_PARAM_ROAMING, 2, 1) < 0) {
++ if (set80211param(drv, IEEE80211_PARAM_ROAMING, 2) < 0) {
+ wpa_printf(MSG_DEBUG, "%s: failed to set wpa_supplicant-based "
+ "roaming", __FUNCTION__);
+ goto fail3;
+ }
+
+- if (set80211param(drv, IEEE80211_PARAM_WPA, 3, 1) < 0) {
++ if (set80211param(drv, IEEE80211_PARAM_WPA, 3) < 0) {
+ wpa_printf(MSG_DEBUG, "%s: failed to enable WPA support",
+ __FUNCTION__);
+ goto fail3;
+@@ -1774,7 +1550,7 @@ static void * wpa_driver_madwifi_init(vo
+ return drv;
+
+ fail3:
+- close(drv->sock);
++ close(drv->ioctl_sock);
+ fail2:
+ wpa_driver_wext_deinit(drv->wext);
+ fail:
+@@ -1785,38 +1561,37 @@ fail:
+
+ static void wpa_driver_madwifi_deinit(void *priv)
+ {
+- struct wpa_driver_madwifi_data *drv = priv;
++ struct madwifi_driver_data *drv = priv;
+
+ if (wpa_driver_madwifi_set_wpa_ie(drv, NULL, 0) < 0) {
+ wpa_printf(MSG_DEBUG, "%s: failed to clear WPA IE",
+ __FUNCTION__);
+ }
+- if (set80211param(drv, IEEE80211_PARAM_ROAMING, 0, 1) < 0) {
++ if (set80211param(drv, IEEE80211_PARAM_ROAMING, 0) < 0) {
+ wpa_printf(MSG_DEBUG, "%s: failed to enable driver-based "
+ "roaming", __FUNCTION__);
+ }
+- if (set80211param(drv, IEEE80211_PARAM_PRIVACY, 0, 1) < 0) {
++ if (set80211param(drv, IEEE80211_PARAM_PRIVACY, 0) < 0) {
+ wpa_printf(MSG_DEBUG, "%s: failed to disable forced Privacy "
+ "flag", __FUNCTION__);
+ }
+- if (set80211param(drv, IEEE80211_PARAM_WPA, 0, 1) < 0) {
++ if (set80211param(drv, IEEE80211_PARAM_WPA, 0) < 0) {
+ wpa_printf(MSG_DEBUG, "%s: failed to disable WPA",
+ __FUNCTION__);
+ }
+
+ wpa_driver_wext_deinit(drv->wext);
+
+- close(drv->sock);
++ close(drv->ioctl_sock);
+ os_free(drv);
+ }
+
+-#endif /* HOSTAPD */
+-
++#endif
+
+ const struct wpa_driver_ops wpa_driver_madwifi_ops = {
+ .name = "madwifi",
+ .desc = "MADWIFI 802.11 support (Atheros, etc.)",
+- .set_key = wpa_driver_madwifi_set_key,
++ .set_key = madwifi_set_key,
+ #ifdef HOSTAPD
+ .hapd_init = madwifi_init,
+ .hapd_deinit = madwifi_deinit,
+@@ -1836,7 +1611,8 @@ const struct wpa_driver_ops wpa_driver_m
+ .sta_clear_stats = madwifi_sta_clear_stats,
+ .commit = madwifi_commit,
+ .set_ap_wps_ie = madwifi_set_ap_wps_ie,
+-#else /* HOSTAPD */
++#endif /* HOSTAPD */
++#if !defined(NO_SUPPLICANT)
+ .get_bssid = wpa_driver_madwifi_get_bssid,
+ .get_ssid = wpa_driver_madwifi_get_ssid,
+ .init = wpa_driver_madwifi_init,
+@@ -1848,5 +1624,5 @@ const struct wpa_driver_ops wpa_driver_m
+ .disassociate = wpa_driver_madwifi_disassociate,
+ .associate = wpa_driver_madwifi_associate,
+ .set_operstate = wpa_driver_madwifi_set_operstate,
+-#endif /* HOSTAPD */
++#endif
+ };