diff options
Diffstat (limited to 'package/kernel/ep80579-drivers/patches/150-ocracoke_island.patch')
| -rw-r--r-- | package/kernel/ep80579-drivers/patches/150-ocracoke_island.patch | 747 |
1 files changed, 747 insertions, 0 deletions
diff --git a/package/kernel/ep80579-drivers/patches/150-ocracoke_island.patch b/package/kernel/ep80579-drivers/patches/150-ocracoke_island.patch new file mode 100644 index 0000000..ae74e0c --- /dev/null +++ b/package/kernel/ep80579-drivers/patches/150-ocracoke_island.patch @@ -0,0 +1,747 @@ +--- a/Embedded/src/GbE/iegbe_oem_phy.c ++++ b/Embedded/src/GbE/iegbe_oem_phy.c +@@ -65,6 +65,10 @@ static int32_t iegbe_oem_link_m88_setup( + static int32_t iegbe_oem_set_phy_mode(struct iegbe_hw *hw); + static int32_t iegbe_oem_detect_phy(struct iegbe_hw *hw); + ++static int32_t iegbe_oem_link_bcm5481_setup(struct iegbe_hw *hw); ++static int32_t bcm5481_read_18sv (struct iegbe_hw *hw, int sv, uint16_t *data); ++static int32_t oi_phy_setup (struct iegbe_hw *hw); ++ + /** + * iegbe_oem_setup_link + * @hw: iegbe_hw struct containing device specific information +@@ -114,6 +118,10 @@ iegbe_oem_setup_link(struct iegbe_hw *hw + } + + switch (hw->phy_id) { ++ case BCM5395S_PHY_ID: ++ return E1000_SUCCESS; ++ break; ++ + case M88E1000_I_PHY_ID: + case M88E1141_E_PHY_ID: + ret_val = iegbe_oem_link_m88_setup(hw); +@@ -121,6 +129,12 @@ iegbe_oem_setup_link(struct iegbe_hw *hw + return ret_val; + } + break; ++ case BCM5481_PHY_ID: ++ ret_val = iegbe_oem_link_bcm5481_setup(hw); ++ if(ret_val) { ++ return ret_val; ++ } ++ break; + default: + DEBUGOUT("Invalid PHY ID\n"); + return -E1000_ERR_PHY_TYPE; +@@ -179,6 +193,51 @@ iegbe_oem_setup_link(struct iegbe_hw *hw + #endif /* ifdef EXTERNAL_MDIO */ + } + ++/** ++ * iegbe_oem_link_bcm5481_setup ++ * @hw: iegbe_hw struct containing device specific information ++ * ++ * Returns E1000_SUCCESS, negative E1000 error code on failure ++ * ++ * copied verbatim from iegbe_oem_link_m88_setup ++ **/ ++static int32_t ++iegbe_oem_link_bcm5481_setup(struct iegbe_hw *hw) ++{ ++ int32_t ret_val; ++ uint16_t phy_data; ++ ++ //DEBUGFUNC(__func__); ++ ++ if(!hw) ++ return -1; ++ ++ /* phy_reset_disable is set in iegbe_oem_set_phy_mode */ ++ if(hw->phy_reset_disable) ++ return E1000_SUCCESS; ++ ++ // Enable MDIX in extended control reg. ++ ret_val = iegbe_oem_read_phy_reg_ex(hw, BCM5481_ECTRL, &phy_data); ++ if(ret_val) ++ { ++ DEBUGOUT("Unable to read BCM5481_ECTRL register\n"); ++ return ret_val; ++ } ++ ++ phy_data &= ~BCM5481_ECTRL_DISMDIX; ++ ret_val = iegbe_oem_write_phy_reg_ex(hw, BCM5481_ECTRL, phy_data); ++ if(ret_val) ++ { ++ DEBUGOUT("Unable to write BCM5481_ECTRL register\n"); ++ return ret_val; ++ } ++ ++ ret_val = oi_phy_setup (hw); ++ if (ret_val) ++ return ret_val; ++ ++ return E1000_SUCCESS; ++} + + /** + * iegbe_oem_link_m88_setup +@@ -340,6 +399,11 @@ iegbe_oem_force_mdi(struct iegbe_hw *hw, + * see iegbe_phy_force_speed_duplex, which does the following for M88 + */ + switch (hw->phy_id) { ++ case BCM5395S_PHY_ID: ++ case BCM5481_PHY_ID: ++ DEBUGOUT("WARNING: An empty iegbe_oem_force_mdi() has been called!\n"); ++ break; ++ + case M88E1000_I_PHY_ID: + case M88E1141_E_PHY_ID: + ret_val = iegbe_oem_read_phy_reg_ex(hw, +@@ -415,6 +479,8 @@ iegbe_oem_phy_reset_dsp(struct iegbe_hw + switch (hw->phy_id) { + case M88E1000_I_PHY_ID: + case M88E1141_E_PHY_ID: ++ case BCM5481_PHY_ID: ++ case BCM5395S_PHY_ID: + DEBUGOUT("No DSP to reset on OEM PHY\n"); + break; + default: +@@ -460,6 +526,11 @@ iegbe_oem_cleanup_after_phy_reset(struct + * see iegbe_phy_force_speed_duplex, which does the following for M88 + */ + switch (hw->phy_id) { ++ case BCM5395S_PHY_ID: ++ case BCM5481_PHY_ID: ++ DEBUGOUT("WARNING: An empty iegbe_oem_cleanup_after_phy_reset() has been called!\n"); ++ break; ++ + case M88E1000_I_PHY_ID: + case M88E1141_E_PHY_ID: + /* +@@ -573,6 +644,11 @@ iegbe_oem_set_phy_mode(struct iegbe_hw * + * use iegbe_set_phy_mode as example + */ + switch (hw->phy_id) { ++ case BCM5395S_PHY_ID: ++ case BCM5481_PHY_ID: ++ DEBUGOUT("WARNING: An empty iegbe_oem_set_phy_mode() has been called!\n"); ++ break; ++ + case M88E1000_I_PHY_ID: + case M88E1141_E_PHY_ID: + ret_val = iegbe_read_eeprom(hw, +@@ -641,6 +717,19 @@ iegbe_oem_detect_phy(struct iegbe_hw *hw + } + hw->phy_type = iegbe_phy_oem; + ++{ ++ // If MAC2 (BCM5395 switch), manually detect the phy ++ struct iegbe_adapter *adapter; ++ uint32_t device_number; ++ adapter = (struct iegbe_adapter *) hw->back; ++ device_number = PCI_SLOT(adapter->pdev->devfn); ++ if (device_number == ICP_XXXX_MAC_2) { ++ hw->phy_id = BCM5395S_PHY_ID; ++ hw->phy_revision = 0; ++ return E1000_SUCCESS; ++ } ++} ++ + ret_val = iegbe_oem_read_phy_reg_ex(hw, PHY_ID1, &phy_id_high); + if(ret_val) { + DEBUGOUT("Unable to read PHY register PHY_ID1\n"); +@@ -690,6 +779,8 @@ iegbe_oem_get_tipg(struct iegbe_hw *hw) + switch (hw->phy_id) { + case M88E1000_I_PHY_ID: + case M88E1141_E_PHY_ID: ++ case BCM5481_PHY_ID: ++ case BCM5395S_PHY_ID: + phy_num = DEFAULT_ICP_XXXX_TIPG_IPGT; + break; + default: +@@ -738,6 +829,8 @@ iegbe_oem_phy_is_copper(struct iegbe_hw + switch (hw->phy_id) { + case M88E1000_I_PHY_ID: + case M88E1141_E_PHY_ID: ++ case BCM5481_PHY_ID: ++ case BCM5395S_PHY_ID: + isCopper = TRUE; + break; + default: +@@ -796,13 +889,13 @@ iegbe_oem_get_phy_dev_number(struct iegb + switch(device_number) + { + case ICP_XXXX_MAC_0: +- hw->phy_addr = 0x00; ++ hw->phy_addr = 0x01; + break; + case ICP_XXXX_MAC_1: +- hw->phy_addr = 0x01; ++ hw->phy_addr = 0x02; + break; + case ICP_XXXX_MAC_2: +- hw->phy_addr = 0x02; ++ hw->phy_addr = 0x00; + break; + default: hw->phy_addr = 0x00; + } +@@ -851,6 +944,12 @@ iegbe_oem_mii_ioctl(struct iegbe_adapter + if(!adapter || !ifr) { + return -1; + } ++ ++ // If MAC2 (BCM5395 switch) then leave now ++ if ((PCI_SLOT(adapter->pdev->devfn)) == ICP_XXXX_MAC_2) { ++ return -1; ++ } ++ + switch (data->reg_num) { + case PHY_CTRL: + if(mii_reg & MII_CR_POWER_DOWN) { +@@ -987,6 +1086,11 @@ void iegbe_oem_get_phy_regs(struct iegbe + * [10] = mdix mode + */ + switch (adapter->hw.phy_id) { ++ case BCM5395S_PHY_ID: ++ case BCM5481_PHY_ID: ++ DEBUGOUT("WARNING: An empty iegbe_oem_get_phy_regs() has been called!\n"); ++ break; ++ + case M88E1000_I_PHY_ID: + case M88E1141_E_PHY_ID: + if(corrected_len > 0) { +@@ -1068,8 +1172,13 @@ iegbe_oem_phy_loopback(struct iegbe_adap + * Loopback configuration is the same for each of the supported PHYs. + */ + switch (adapter->hw.phy_id) { ++ case BCM5395S_PHY_ID: ++ DEBUGOUT("WARNING: An empty iegbe_oem_phy_loopback() has been called!\n"); ++ break; ++ + case M88E1000_I_PHY_ID: + case M88E1141_E_PHY_ID: ++ case BCM5481_PHY_ID: + + adapter->hw.autoneg = FALSE; + +@@ -1182,8 +1291,14 @@ iegbe_oem_loopback_cleanup(struct iegbe_ + } + + switch (adapter->hw.phy_id) { ++ case BCM5395S_PHY_ID: ++ DEBUGOUT("WARNING: An empty iegbe_oem_loopback_cleanup() has been called!\n"); ++ return; ++ break; ++ + case M88E1000_I_PHY_ID: + case M88E1141_E_PHY_ID: ++ case BCM5481_PHY_ID: + default: + adapter->hw.autoneg = TRUE; + +@@ -1243,6 +1358,11 @@ iegbe_oem_phy_speed_downgraded(struct ie + */ + + switch (hw->phy_id) { ++ case BCM5395S_PHY_ID: ++ case BCM5481_PHY_ID: ++ *isDowngraded = 0; ++ break; ++ + case M88E1000_I_PHY_ID: + case M88E1141_E_PHY_ID: + ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS, +@@ -1305,6 +1425,11 @@ iegbe_oem_check_polarity(struct iegbe_hw + */ + + switch (hw->phy_id) { ++ case BCM5395S_PHY_ID: ++ case BCM5481_PHY_ID: ++ *polarity = 0; ++ break; ++ + case M88E1000_I_PHY_ID: + case M88E1141_E_PHY_ID: + /* return the Polarity bit in the Status register. */ +@@ -1367,6 +1492,25 @@ iegbe_oem_phy_is_full_duplex(struct iegb + */ + + switch (hw->phy_id) { ++ case BCM5395S_PHY_ID: ++ /* Always full duplex */ ++ *isFD = 1; ++ break; ++ ++ case BCM5481_PHY_ID: ++ ret_val = iegbe_read_phy_reg(hw, BCM5481_ASTAT, &phy_data); ++ if(ret_val) return ret_val; ++ ++ switch (BCM5481_ASTAT_HCD(phy_data)) { ++ case BCM5481_ASTAT_1KBTFD: ++ case BCM5481_ASTAT_100BTXFD: ++ *isFD = 1; ++ break; ++ default: ++ *isFD = 0; ++ } ++ break; ++ + case M88E1000_I_PHY_ID: + case M88E1141_E_PHY_ID: + ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS, +@@ -1423,6 +1567,25 @@ iegbe_oem_phy_is_speed_1000(struct iegbe + */ + + switch (hw->phy_id) { ++ case BCM5395S_PHY_ID: ++ /* Always 1000mb */ ++ *is1000 = 1; ++ break; ++ ++ case BCM5481_PHY_ID: ++ ret_val = iegbe_read_phy_reg(hw, BCM5481_ASTAT, &phy_data); ++ if(ret_val) return ret_val; ++ ++ switch (BCM5481_ASTAT_HCD(phy_data)) { ++ case BCM5481_ASTAT_1KBTFD: ++ case BCM5481_ASTAT_1KBTHD: ++ *is1000 = 1; ++ break; ++ default: ++ *is1000 = 0; ++ } ++ break; ++ + case M88E1000_I_PHY_ID: + case M88E1141_E_PHY_ID: + ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS, +@@ -1478,6 +1641,25 @@ iegbe_oem_phy_is_speed_100(struct iegbe_ + * see iegbe_config_mac_to_phy + */ + switch (hw->phy_id) { ++ case BCM5395S_PHY_ID: ++ /* Always 1000Mb, never 100mb */ ++ *is100 = 0; ++ break; ++ ++ case BCM5481_PHY_ID: ++ ret_val = iegbe_read_phy_reg(hw, BCM5481_ASTAT, &phy_data); ++ if(ret_val) return ret_val; ++ ++ switch (BCM5481_ASTAT_HCD(phy_data)) { ++ case BCM5481_ASTAT_100BTXFD: ++ case BCM5481_ASTAT_100BTXHD: ++ *is100 = 1; ++ break; ++ default: ++ *is100 = 0; ++ } ++ break; ++ + case M88E1000_I_PHY_ID: + case M88E1141_E_PHY_ID: + ret_val = iegbe_oem_read_phy_reg_ex(hw, +@@ -1535,6 +1717,11 @@ iegbe_oem_phy_get_info(struct iegbe_hw * + * see iegbe_phy_m88_get_info + */ + switch (hw->phy_id) { ++ case BCM5395S_PHY_ID: ++ case BCM5481_PHY_ID: ++ DEBUGOUT("WARNING: An empty iegbe_oem_phy_get_info() has been called!\n"); ++ break; ++ + case M88E1000_I_PHY_ID: + case M88E1141_E_PHY_ID: + /* The downshift status is checked only once, after link is +@@ -1636,8 +1823,13 @@ iegbe_oem_phy_hw_reset(struct iegbe_hw * + * the M88 used in truxton. + */ + switch (hw->phy_id) { ++ case BCM5395S_PHY_ID: ++ DEBUGOUT("WARNING: An empty iegbe_oem_phy_hw_reset() has been called!\n"); ++ break; ++ + case M88E1000_I_PHY_ID: + case M88E1141_E_PHY_ID: ++ case BCM5481_PHY_ID: + ret_val = iegbe_oem_read_phy_reg_ex(hw, PHY_CTRL, &phy_data); + if(ret_val) { + DEBUGOUT("Unable to read register PHY_CTRL\n"); +@@ -1699,6 +1891,8 @@ iegbe_oem_phy_init_script(struct iegbe_h + switch (hw->phy_id) { + case M88E1000_I_PHY_ID: + case M88E1141_E_PHY_ID: ++ case BCM5481_PHY_ID: ++ case BCM5395S_PHY_ID: + DEBUGOUT("Nothing to do for OEM PHY Init"); + break; + default: +@@ -1735,6 +1929,11 @@ iegbe_oem_read_phy_reg_ex(struct iegbe_h + return -1; + } + ++ if (hw->phy_id == BCM5395S_PHY_ID) { ++ DEBUGOUT("WARNING: iegbe_oem_read_phy_reg_ex() has been unexpectedly called!\n"); ++ return -1; ++ } ++ + /* call the GCU func that will read the phy + * + * Make note that the M88 phy is what'll be used on Truxton. +@@ -1782,6 +1981,11 @@ iegbe_oem_set_trans_gasket(struct iegbe_ + } + + switch (hw->phy_id) { ++ case BCM5395S_PHY_ID: ++ case BCM5481_PHY_ID: ++ DEBUGOUT("WARNING: An empty iegbe_oem_set_trans_gasket() has been called!\n"); ++ break; ++ + case M88E1000_I_PHY_ID: + case M88E1141_E_PHY_ID: + /* Gasket set correctly for Marvell Phys, so nothing to do */ +@@ -1886,6 +2090,8 @@ iegbe_oem_phy_needs_reset_with_mac(struc + switch (hw->phy_id) { + case M88E1000_I_PHY_ID: + case M88E1141_E_PHY_ID: ++ case BCM5481_PHY_ID: ++ case BCM5395S_PHY_ID: + ret_val = FALSE; + break; + default: +@@ -1935,6 +2141,8 @@ iegbe_oem_config_dsp_after_link_change(s + switch (hw->phy_id) { + case M88E1000_I_PHY_ID: + case M88E1141_E_PHY_ID: ++ case BCM5481_PHY_ID: ++ case BCM5395S_PHY_ID: + DEBUGOUT("No DSP to configure on OEM PHY"); + break; + default: +@@ -1978,6 +2186,12 @@ iegbe_oem_get_cable_length(struct iegbe_ + } + + switch (hw->phy_id) { ++ case BCM5395S_PHY_ID: ++ case BCM5481_PHY_ID: ++ *min_length = 0; ++ *max_length = iegbe_igp_cable_length_150; ++ break; ++ + case M88E1000_I_PHY_ID: + case M88E1141_E_PHY_ID: + ret_val = iegbe_oem_read_phy_reg_ex(hw, +@@ -2061,6 +2275,23 @@ iegbe_oem_phy_is_link_up(struct iegbe_hw + */ + + switch (hw->phy_id) { ++ case BCM5395S_PHY_ID: ++ /* Link always up */ ++ *isUp = TRUE; ++ return E1000_SUCCESS; ++ break; ++ ++ case BCM5481_PHY_ID: ++ iegbe_oem_read_phy_reg_ex(hw, BCM5481_ESTAT, &phy_data); ++ ret_val = iegbe_oem_read_phy_reg_ex(hw, BCM5481_ESTAT, &phy_data); ++ if(ret_val) ++ { ++ DEBUGOUT("Unable to read PHY register BCM5481_ESTAT\n"); ++ return ret_val; ++ } ++ statusMask = BCM5481_ESTAT_LINK; ++ break; ++ + case M88E1000_I_PHY_ID: + case M88E1141_E_PHY_ID: + iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); +@@ -2092,3 +2323,210 @@ iegbe_oem_phy_is_link_up(struct iegbe_hw + #endif /* ifdef EXTERNAL_MDIO */ + } + ++ ++ ++//----- ++// Read BCM5481 expansion register ++// ++int32_t ++bcm5481_read_ex (struct iegbe_hw *hw, uint16_t reg, uint16_t *data) ++{ ++ int ret; ++ uint16_t selector; ++ uint16_t reg_data; ++ ++ // Get the current value of bits 15:12 ++ ret = iegbe_oem_read_phy_reg_ex (hw, 0x15, &selector); ++ if (ret) ++ return ret; ++ ++ // Select the expansion register ++ selector &= 0xf000; ++ selector |= (0xf << 8) | (reg); ++ iegbe_oem_write_phy_reg_ex (hw, 0x17, selector); ++ ++ // Read the expansion register ++ ret = iegbe_oem_read_phy_reg_ex (hw, 0x15, ®_data); ++ ++ // De-select the expansion registers. ++ selector &= 0xf000; ++ iegbe_oem_write_phy_reg_ex (hw, 0x17, selector); ++ ++ if (ret) ++ return ret; ++ ++ *data = reg_data; ++ return ret; ++} ++ ++//----- ++// Read reg 0x18 sub-register ++// ++static int32_t ++bcm5481_read_18sv (struct iegbe_hw *hw, int sv, uint16_t *data) ++{ ++ int ret; ++ uint16_t tmp_data; ++ ++ // Select reg 0x18, sv ++ tmp_data = ((sv & BCM5481_R18H_SV_MASK) << 12) | BCM5481_R18H_SV_MCTRL; ++ ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R18H, tmp_data); ++ if(ret) ++ return ret; ++ ++ // Read reg 0x18, sv ++ ret = iegbe_oem_read_phy_reg_ex (hw, BCM5481_R18H, &tmp_data); ++ if(ret) ++ return ret; ++ ++ *data = tmp_data; ++ return ret; ++} ++ ++//----- ++// Read reg 0x1C sub-register ++// ++int32_t ++bcm5481_read_1csv (struct iegbe_hw *hw, int sv, uint16_t *data) ++{ ++ int ret; ++ uint16_t tmp_data; ++ ++ // Select reg 0x1c, sv ++ tmp_data = ((sv & BCM5481_R1CH_SV_MASK) << BCM5481_R1CH_SV_SHIFT); ++ ++ ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R1CH, tmp_data); ++ if(ret) ++ return ret; ++ ++ // Read reg 0x1c, sv ++ ret = iegbe_oem_read_phy_reg_ex (hw, BCM5481_R1CH, &tmp_data); ++ if(ret) ++ return ret; ++ ++ *data = tmp_data; ++ return ret; ++} ++ ++//----- ++// Read-modify-write a 0x1C register. ++// ++// hw - hardware access info. ++// reg - 0x1C register to modify. ++// data - bits which should be set. ++// mask - the '1' bits in this argument will be cleared in the data ++// read from 'reg' then 'data' will be or'd in and the result ++// will be written to 'reg'. ++ ++int32_t ++bcm5481_rmw_1csv (struct iegbe_hw *hw, uint16_t reg, uint16_t data, uint16_t mask) ++{ ++ int32_t ret; ++ uint16_t reg_data; ++ ++ ret = 0; ++ ++ ret = bcm5481_read_1csv (hw, reg, ®_data); ++ if (ret) ++ { ++ DEBUGOUT("Unable to read BCM5481 1CH register\n"); ++ printk (KERN_ERR "Unable to read BCM5481 1CH register [0x%x]\n", reg); ++ return ret; ++ } ++ ++ reg_data &= ~mask; ++ reg_data |= (BCM5481_R1CH_WE | data); ++ ++ ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R1CH, reg_data); ++ if(ret) ++ { ++ DEBUGOUT("Unable to write BCM5481 1CH register\n"); ++ printk (KERN_ERR "Unable to write BCM5481 1CH register\n"); ++ return ret; ++ } ++ ++ return ret; ++} ++ ++int32_t ++oi_phy_setup (struct iegbe_hw *hw) ++{ ++ int ret; ++ uint16_t pmii_data; ++ uint16_t mctrl_data; ++ uint16_t cacr_data; ++ ++ ret = 0; ++ ++ // Set low power mode via reg 0x18, sv010, bit 6 ++ // Do a read-modify-write on reg 0x18, sv010 register to preserve existing bits. ++ ret = bcm5481_read_18sv (hw, BCM5481_R18H_SV_PMII, &pmii_data); ++ if (ret) ++ { ++ DEBUGOUT("Unable to read BCM5481_R18H_SV_PMII register\n"); ++ printk (KERN_ERR "Unable to read BCM5481_R18H_SV_PMII register\n"); ++ return ret; ++ } ++ ++ // Set the LPM bit in the data just read and write back to sv010 ++ // The shadow register select bits [2:0] are set by reading the sv010 ++ // register. ++ pmii_data |= BCM5481_R18H_SV010_LPM; ++ ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R18H, pmii_data); ++ if(ret) ++ { ++ DEBUGOUT("Unable to write BCM5481_R18H register\n"); ++ printk (KERN_ERR "Unable to write BCM5481_R18H register\n"); ++ return ret; ++ } ++ ++ ++ // Set the RGMII RXD to RXC skew bit in reg 0x18, sv111 ++ ++ if (bcm5481_read_18sv (hw, BCM5481_R18H_SV_MCTRL, &mctrl_data)) ++ { ++ DEBUGOUT("Unable to read BCM5481_R18H_SV_MCTRL register\n"); ++ printk (KERN_ERR "Unable to read BCM5481_R18H_SV_MCTRL register\n"); ++ return ret; ++ } ++ mctrl_data |= (BCM5481_R18H_WE | BCM5481_R18H_SV111_SKEW); ++ ++ ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R18H, mctrl_data); ++ if(ret) ++ { ++ DEBUGOUT("Unable to write BCM5481_R18H register\n"); ++ printk (KERN_ERR "Unable to write BCM5481_R18H register\n"); ++ return ret; ++ } ++ ++ // Enable RGMII transmit clock delay in reg 0x1c, sv00011 ++ ret = bcm5481_read_1csv (hw, BCM5481_R1CH_CACR, &cacr_data); ++ if (ret) ++ { ++ DEBUGOUT("Unable to read BCM5481_R1CH_CACR register\n"); ++ printk (KERN_ERR "Unable to read BCM5481_R1CH_CACR register\n"); ++ return ret; ++ } ++ ++ cacr_data |= (BCM5481_R1CH_WE | BCM5481_R1CH_CACR_TCD); ++ ++ ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R1CH, cacr_data); ++ if(ret) ++ { ++ DEBUGOUT("Unable to write BCM5481_R1CH register\n"); ++ printk (KERN_ERR "Unable to write BCM5481_R1CH register\n"); ++ return ret; ++ } ++ ++ // Enable dual link speed indication (0x1c, sv 00010, bit 2) ++ ret = bcm5481_rmw_1csv (hw, BCM5481_R1CH_SC1, BCM5481_R1CH_SC1_LINK, BCM5481_R1CH_SC1_LINK); ++ if (ret) ++ return ret; ++ ++ // Enable link and activity on ACTIVITY LED (0x1c, sv 01001, bit 4=1, bit 3=0) ++ ret = bcm5481_rmw_1csv (hw, BCM5481_R1CH_LCTRL, BCM5481_R1CH_LCTRL_ALEN, BCM5481_R1CH_LCTRL_ALEN | BCM5481_R1CH_LCTRL_AEN); ++ if (ret) ++ return ret; ++ ++ return ret; ++} +--- a/Embedded/src/GbE/iegbe_oem_phy.h ++++ b/Embedded/src/GbE/iegbe_oem_phy.h +@@ -95,6 +95,8 @@ int32_t iegbe_oem_phy_is_link_up(struct + + #define DEFAULT_ICP_XXXX_TIPG_IPGT 8 /* Inter Packet Gap Transmit Time */ + #define ICP_XXXX_TIPG_IPGT_MASK 0x000003FFUL ++#define BCM5481_PHY_ID 0x0143BCA0 ++#define BCM5395S_PHY_ID 0x0143BCF0 + + /* Miscellaneous defines */ + #ifdef IEGBE_10_100_ONLY +@@ -103,5 +105,65 @@ int32_t iegbe_oem_phy_is_link_up(struct + #define ICP_XXXX_AUTONEG_ADV_DEFAULT 0x2F + #endif + ++/* BCM5481 specifics */ ++ ++#define BCM5481_ECTRL (0x10) ++#define BCM5481_ESTAT (0x11) ++#define BCM5481_RXERR (0x12) ++#define BCM5481_EXPRW (0x15) ++#define BCM5481_EXPACC (0x17) ++#define BCM5481_ASTAT (0x19) ++#define BCM5481_R18H (0x18) ++#define BCM5481_R1CH (0x1c) ++ ++/* indirect register access via register 18h */ ++ ++#define BCM5481_R18H_SV_MASK (7) // Mask for SV bits. ++#define BCM5481_R18H_SV_ACTRL (0) // SV000 Aux. control ++#define BCM5481_R18H_SV_10BT (1) // SV001 10Base-T ++#define BCM5481_R18H_SV_PMII (2) // SV010 Power/MII control ++#define BCM5481_R18H_SV_MTEST (4) // SV100 Misc. test ++#define BCM5481_R18H_SV_MCTRL (7) // SV111 Misc. control ++ ++#define BCM5481_R18H_SV001_POL (1 << 13) // Polarity ++#define BCM5481_R18H_SV010_LPM (1 << 6) ++#define BCM5481_R18H_SV111_SKEW (1 << 8) ++#define BCM5481_R18H_WE (1 << 15) // Write enable ++ ++// 0x1c registers ++#define BCM5481_R1CH_SV_SHIFT (10) ++#define BCM5481_R1CH_SV_MASK (0x1f) ++#define BCM5481_R1CH_SC1 (0x02) // sv00010 Spare control 1 ++#define BCM5481_R1CH_CACR (0x03) // sv00011 Clock alignment control ++#define BCM5481_R1CH_LCTRL (0x09) // sv01001 LED control ++#define BCM5481_R1CH_LEDS1 (0x0d) // sv01101 LED selector 1 ++ ++// 0x1c common ++#define BCM5481_R1CH_WE (1 << 15) // Write enable ++ ++// 0x1c, sv 00010 ++#define BCM5481_R1CH_SC1_LINK (1 << 2) // sv00010 Linkspeed ++ ++// 0x1c, sv 00011 ++#define BCM5481_R1CH_CACR_TCD (1 << 9) // sv00011 RGMII tx clock delay ++ ++// 0x1c, sv 01001 ++#define BCM5481_R1CH_LCTRL_ALEN (1 << 4) // Activity/Link enable on ACTIVITY LED ++#define BCM5481_R1CH_LCTRL_AEN (1 << 3) // Activity enable on ACTIVITY LED ++ ++#define BCM5481_ECTRL_DISMDIX (1 <<14) ++ ++#define BCM5481_MCTRL_AUTOMDIX (1 <<9) ++ ++#define BCM5481_ESTAT_LINK (1 << 8) ++ ++#define BCM5481_ASTAT_ANC (1 << 15) ++#define BCM5481_ASTAT_ANHCD (7 << 8) ++#define BCM5481_ASTAT_HCD(x) ((x >> 8) & 7) ++#define BCM5481_ASTAT_1KBTFD (0x7) ++#define BCM5481_ASTAT_1KBTHD (0x6) ++#define BCM5481_ASTAT_100BTXFD (0x5) ++#define BCM5481_ASTAT_100BTXHD (0x3) ++ + #endif /* ifndef _IEGBE_OEM_PHY_H_ */ + |