1 files changed, 95 insertions, 0 deletions
diff --git a/package/kernel/lantiq/ltq-vmmc/Config.in b/package/kernel/lantiq/ltq-vmmc/Config.in
new file mode 100644
index 0000000..89e1bc5
--- /dev/null
+++ b/package/kernel/lantiq/ltq-vmmc/Config.in
@@ -0,0 +1,95 @@
+choice
+	prompt "device selection"
+	depends on PACKAGE_kmod-ltq-vmmc
+	default VOICE_CPE_VMMC_WITH_DEVICE_DANUBE
+	help
+		Select the target device.
+
+	config VOICE_CPE_VMMC_WITH_DEVICE_DANUBE
+		bool "Danube, Twinpass, Vinax"
+		depends on TARGET_lantiq_xway
+
+#	config VOICE_CPE_VMMC_WITH_DEVICE_AR9
+#		bool "AR9 family"
+#		depends on TARGET_lantiq_ar9
+
+#	config VOICE_CPE_VMMC_WITH_DEVICE_VR9
+#		bool "VR9 family"
+#		depends on TARGET_lantiq_vr9
+#	
+	config VOICE_VMMC_WITH_DEVICE_FALCON
+		bool "FALC-ON"
+		depends on (TARGET_lantiq_falcon||TARGET_lantiq_falcon_stable)
+
+endchoice
+
+choice
+	depends on PACKAGE_kmod-ltq-vmmc
+	prompt "FXS coefficients"
+	default LTQ_VOICE_CPE_VMMC_COEF_FALCON_ETSI
+	help
+		Select country specific FXS coefficient file.
+
+	config LTQ_VOICE_CPE_VMMC_COEF_FALCON_ETSI
+		bool "ETSI_T3R10: Vl:40V, Ic:25mA, Vid:25V, Vri:45Vrms, f:25Hz"	
+		help
+		  These coefficents contains a parameter set with line impedance Zr according to ETSI.
+
+		  T:   gain in transmit direction (attenuation 3dBr) [dBr]
+		  R:   gain in receive direction (attenuation 10dBr) [dBr]
+		  Vl:  on-hook voltage limit [V]
+		  Ic:  off-hook loop current [mA]
+		  Vid: low-power-standby voltage [V]
+		  Vri: ring voltage [v]
+		  f:   ring frequency [V]
+
+	config LTQ_VOICE_CPE_VMMC_COEF_FALCON_US600R
+		bool "USA_600R_T3R10: Vl:40V, Ic:25mA, Vid:25V, Vri:45V, f:20Hz"
+		help
+		  These coefficents contains a parameter set with line impedance e.g. for USA.
+ 
+		  T:   gain in transmit direction (attenuation 3dBr) [dBr]
+		  R:   gain in receive direction (attenuation 10dBr) [dBr]
+		  Vl:  on-hook voltage limit [V]
+		  Ic:  off-hook loop current [mA]
+		  Vid: low-power-standby voltage [V]
+		  Vri: ring voltage [v]
+		  f:   ring frequency [V]
+
+	config LTQ_VOICE_CPE_VMMC_COEF_FALCON_USE_CUSTOM_FILE
+		bool "Select own FXS coefficient file"
+endchoice
+
+config VOICE_CPE_VMMC_PMC
+	depends on (VOICE_CPE_VMMC_WITH_DEVICE_AR9 || VOICE_CPE_VMMC_WITH_DEVICE_VR9)
+	bool "Power Management Control support"
+	default n
+	help
+		Option to enable Power Management Control on AR9, VR9. Not supported for Danube.
+
+config VOICE_CPE_VMMC_DISABLE_DECT_NIBBLE_SWAP
+	bool "Disable DECT nibble swap"
+	depends on PACKAGE_kmod-ltq-vmmc
+	default n
+	help
+		Option to disable DECT nibble swap for COSIC modem (for backward compatibility only).
+
+config VOICE_CPE_VMMC_EVENT_LOGGER
+	depends on BROKEN
+	bool "Event logger support"
+	depends on PACKAGE_kmod-ltq-vmmc
+	default n
+	help
+		Option to enable details traces between drv_vmmc and the voice FW
+		- for debugging only
+		- requires package ifx-evtlog
+
+config VOICE_CPE_VMMC_MPS_HISTORY_SIZE
+	int "MPS history buffer in words (0<=size<=512)"
+	depends on PACKAGE_kmod-ltq-vmmc
+	default "128"
+	help
+		MPS history buffer (default=128 words, maximum=512 words, 0=disable)
+		To opimize the memory footprint in RAM, you might want to set the
+		buffer size to 0.
+