diff options
Diffstat (limited to 'package/kernel/mac80211/patches/300-pending_work.patch')
| -rw-r--r-- | package/kernel/mac80211/patches/300-pending_work.patch | 4142 |
1 files changed, 0 insertions, 4142 deletions
diff --git a/package/kernel/mac80211/patches/300-pending_work.patch b/package/kernel/mac80211/patches/300-pending_work.patch index 1da7941..e69de29 100644 --- a/package/kernel/mac80211/patches/300-pending_work.patch +++ b/package/kernel/mac80211/patches/300-pending_work.patch @@ -1,4142 +0,0 @@ -commit 584d297fd29fb39c76af25ae74ff9d5fe74c8a14 -Author: Helmut Schaa <helmut.schaa@googlemail.com> -Date: Wed Mar 12 10:37:55 2014 +0100 - - ath9k: Fix sequence number assignment for non-data frames - - Since commit 558ff225de80ac95b132d3a115ddadcd64498b4f (ath9k: fix - ps-poll responses under a-mpdu sessions) non-data frames would have - gotten a sequence number from a TIDs sequence counter instead of - using the global sequence counter. - - This can lead to instable connections. - - To fix this only select the correct TID if we are processing a - data frame. Furthermore, prevent non-data frames to get a sequence - number from a TID sequence counter by adding a check to - ath_tx_setup_buffer. - - Cc: Felix Fietkau <nbd@openwrt.org> - Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> - -commit 3a0f984b1cdcd6a9f8c441635ef3b05d58547f4e -Author: Felix Fietkau <nbd@openwrt.org> -Date: Tue Mar 11 14:03:32 2014 +0100 - - ath9k_hw: set ANI firstep as absolute values instead of relative - - On older chips, the INI value differ in similar ways as cycpwr_thr1, so - convert it to absolute values as well. - - Since the ANI algorithm is different here compared to the old - implementation (fewer steps, controlled at a different point in time), - it makes sense to use values similar to what would be applied for newer - chips, just without relying on INI defaults. - - Signed-off-by: Felix Fietkau <nbd@openwrt.org> - -commit 91d70d40400c569b49605b78fd7c43e9405694f4 -Author: Felix Fietkau <nbd@openwrt.org> -Date: Tue Mar 11 14:00:37 2014 +0100 - - ath9k_hw: set ANI cycpwr_thr1 as absolute values instead of relative - - The table was copied from the ANI implementation of AR9300. It assumes - that the INI values contain a baseline value that is usable as reference - from which to increase/decrease based on the noise immunity value. - - On older chips, the differences are bigger and especially AR5008/AR9001 - are configured to much more sensitive values than what is useful. - - Improve ANI behavior by reverting to the absolute values used in the - previous implementation (expressed as a simple formula instead of the - old table). - - Signed-off-by: Felix Fietkau <nbd@openwrt.org> - -commit c977493766310a825f406836636ffd66e1447783 -Author: Felix Fietkau <nbd@openwrt.org> -Date: Mon Mar 10 19:52:56 2014 +0100 - - ath9k_hw: remove ANI function restrictions for AP mode - - The primary purpose of this piece of code was to selectively disable - OFDM weak signal detection. The checks for this are elsewhere, and an - earlier commit relaxed the restrictions for older chips, which are more - sensitive to interference. - - Signed-off-by: Felix Fietkau <nbd@openwrt.org> - -commit 8d804f1af11e4e058b1e8453327777d73a585cb8 -Author: Felix Fietkau <nbd@openwrt.org> -Date: Sun Mar 9 11:25:43 2014 +0100 - - ath9k: clean up and enhance ANI debugfs file - - Unify scnprintf calls and include the current OFDM/CCK immunity level. - - Signed-off-by: Felix Fietkau <nbd@openwrt.org> - -commit 22e298b5a3a8a49e33805d4e351965123dede35b -Author: Felix Fietkau <nbd@openwrt.org> -Date: Sun Mar 9 10:58:47 2014 +0100 - - ath9k: fix ready time of the multicast buffer queue - - qi->tqi_readyTime is written directly to registers that expect - microseconds as unit instead of TU. - When setting the CABQ ready time, cur_conf->beacon_interval is in TU, so - convert it to microseconds before passing it to ath9k_hw. - - This should hopefully fix some Tx DMA issues with buffered multicast - frames in AP mode. - - Cc: stable@vger.kernel.org - Signed-off-by: Felix Fietkau <nbd@openwrt.org> - -commit fcb064fdd5a27bec8d24099bc0172468f34c97cb -Author: Felix Fietkau <nbd@openwrt.org> -Date: Sun Mar 9 09:43:09 2014 +0100 - - ath9k_hw: fix unreachable code in baseband hang detection code - - The commit "ath9k: reduce baseband hang detection false positive rate" - added a delay in the loop checking the baseband state, however it was - unreachable due to previous 'continue' statements. - - Reported-by: Dan Carpenter <dan.carpenter@oracle.com> - Signed-off-by: Felix Fietkau <nbd@openwrt.org> - -commit 31959d8df39319e32c6d5ba9c135727be90cfad7 -Author: Michal Kazior <michal.kazior@tieto.com> -Date: Fri Mar 7 08:09:38 2014 +0100 - - mac80211: fix possible NULL dereference - - If chanctx is missing on a given vif then the band - is assumed to be 2GHz. However if hw doesn't - support 2GHz band then mac80211 ended up with a - NULL dereference. - - This fixes a splat: - - [ 4605.207223] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 - [ 4605.210789] IP: [<ffffffffa07b5635>] ieee80211_parse_bitrates+0x65/0x110 [mac80211] - - The splat was preceeded by WARN_ON(!chanctx_conf) - in ieee80211_get_sdata_band(). - - Signed-off-by: Michal Kazior <michal.kazior@tieto.com> - -commit 6c5a3ffa0a2d22c091a2717f427259bacf77ac5e -Author: Michael Braun <michael-dev@fami-braun.de> -Date: Thu Mar 6 15:08:43 2014 +0100 - - mac80211: fix WPA with VLAN on AP side with ps-sta again - - commit de74a1d9032f4d37ea453ad2a647e1aff4cd2591 - "mac80211: fix WPA with VLAN on AP side with ps-sta" - fixed an issue where queued multicast packets would - be sent out encrypted with the key of an other bss. - - commit "7cbf9d017dbb5e3276de7d527925d42d4c11e732" - "mac80211: fix oops on mesh PS broadcast forwarding" - essentially reverted it, because vif.type cannot be AP_VLAN - due to the check to vif.type in ieee80211_get_buffered_bc before. - - As the later commit intended to fix the MESH case, fix it - by checking for IFTYPE_AP instead of IFTYPE_AP_VLAN. - - Fixes: 7cbf9d017dbb - Cc: <stable@vger.kernel.org> # 3.10.x - Cc: <stable@vger.kernel.org> # 3.11.x - Cc: <stable@vger.kernel.org> # 3.12.x - Cc: <stable@vger.kernel.org> # 3.13.x - Cc: <linux-wireless@vger.kernel.org> - Cc: <projekt-wlan@fem.tu-ilmenau.de> - Signed-off-by: Michael Braun <michael-dev@fami-braun.de> - -commit 9d6ab9bdb9b368a6cf9519f0f92509b5b2c297ec -Author: Johannes Berg <johannes.berg@intel.com> -Date: Mon Mar 3 14:19:08 2014 +0100 - - cfg80211: remove racy beacon_interval assignment - - In case of AP mode, the beacon interval is already reset to - zero inside cfg80211_stop_ap(), and in the other modes it - isn't relevant. Remove the assignment to remove a potential - race since the assignment isn't properly locked. - - Reported-by: Michal Kazior <michal.kazior@tieto.com> - Signed-off-by: Johannes Berg <johannes.berg@intel.com> - -commit 1abdeca3c6fb9cf1f84f85e78ed8d1c33bd69db0 -Author: Felix Fietkau <nbd@openwrt.org> -Date: Fri Feb 28 18:52:56 2014 +0100 - - ath9k_hw: tweak noise immunity thresholds for older chipsets - - Older chipsets are more sensitive to high PHY error counts, and the - current noise immunity thresholds were based on tests run at QCA with - newer chipsets. - - This patch brings back the values from the old ANI implementation for - old chipsets, and it also disables weak signal detection on an earlier - noise immunity level, to improve overall radio stability on affected - devices. - - Signed-off-by: Felix Fietkau <nbd@openwrt.org> - -commit 431e506da5953adc3b65af25f4b90873d528c115 -Author: Felix Fietkau <nbd@openwrt.org> -Date: Fri Feb 28 18:44:13 2014 +0100 - - ath9k_hw: toggle weak signal detection in AP mode on older chipsets - - The commit 80b4205b "ath9k: Fix OFDM weak signal detection for AP mode" - prevented weak signal detection changes from taking effect in AP mode on - all chipsets, claiming it is "not allowed". - - The main reason for not disabling weak signal detection in AP mode is - that typically beacon RSSI is used to track whether it is needed to - boost range, and this is unavailable in AP mode for obvious reasons. - - The problem with not disabling weak signal detection is that older - chipsets are very sensitive to high PHY error counts. When faced with - heavy noise, this can lead to an excessive amount of "Failed to stop - TX DMA" errors in the field. - - Signed-off-by: Felix Fietkau <nbd@openwrt.org> - -commit 98d1a6c5b14688ed030e81b889f607be308e0df9 -Author: Felix Fietkau <nbd@openwrt.org> -Date: Mon Feb 24 22:20:32 2014 +0100 - - ath9k: fix invalid descriptor discarding - - Only set sc->rx.discard_next to rx_stats->rs_more when actually - discarding the current descriptor. - - Also, fix a detection of broken descriptors: - First the code checks if the current descriptor is not done. - Then it checks if the next descriptor is done. - Add a check that afterwards checks the first descriptor again, because - it might have been completed in the mean time. - - This fixes a regression introduced in - commit 723e711356b5a8a95728a890e254e8b0d47b55cf - "ath9k: fix handling of broken descriptors" - - Cc: stable@vger.kernel.org - Reported-by: Marco André Dinis <marcoandredinis@gmail.com> - Signed-off-by: Felix Fietkau <nbd@openwrt.org> - -commit 52a46300e782fe6994466523eb2b0b59091ea59f -Author: Felix Fietkau <nbd@openwrt.org> -Date: Mon Feb 24 11:43:50 2014 +0100 - - ath9k: reduce baseband hang detection false positive rate - - Check if the baseband state remains stable, and add a small delay - between register reads. - - Signed-off-by: Felix Fietkau <nbd@openwrt.org> - -commit 118945bb12082e9d4edddc868d88143164e0f440 -Author: Felix Fietkau <nbd@openwrt.org> -Date: Sat Feb 22 14:55:23 2014 +0100 - - ath5k: set SURVEY_INFO_IN_USE on get_survey - - Only one channel is returned - the one currently being used. - - Signed-off-by: Felix Fietkau <nbd@openwrt.org> - -commit ee41f72476e1ea44283dfe1cbf75b9543a1e15c8 -Author: Felix Fietkau <nbd@openwrt.org> -Date: Sat Feb 22 14:44:52 2014 +0100 - - ath9k: make some hardware reset log messages debug-only - - On some chips, baseband watchdog hangs are more common than others, and - the driver has support for handling them. - Interrupts even after a watchdog hang are also quite common, so there's - not much point in spamming the user's logfiles. - - Signed-off-by: Felix Fietkau <nbd@openwrt.org> - -commit b14fbb554fc65a2e0b5c41a319269b0350f187e7 -Author: Felix Fietkau <nbd@openwrt.org> -Date: Sat Feb 22 14:35:25 2014 +0100 - - ath9k: do not set half/quarter channel flags in AR_PHY_MODE - - 5/10 MHz channel bandwidth is configured via the PLL clock, instead of - the AR_PHY_MODE register. Using that register is AR93xx specific, and - makes the mode incompatible with earlier chipsets. - - In some early versions, these flags were apparently applied at the wrong - point in time and thus did not cause connectivity issues, however now - they are causing problems, as pointed out in this OpenWrt ticket: - - https://dev.openwrt.org/ticket/14916 - - Signed-off-by: Felix Fietkau <nbd@openwrt.org> - -commit 0f1cb7be2551b30b02cd54c897e0e29e483cfda5 -Author: Felix Fietkau <nbd@openwrt.org> -Date: Sat Feb 22 13:43:29 2014 +0100 - - ath9k: fix ps-poll responses under a-mpdu sessions - - When passing tx frames to the U-APSD queue for powersave poll responses, - the ath_atx_tid pointer needs to be passed to ath_tx_setup_buffer for - proper sequence number accounting. - - This fixes high latency and connection stability issues with ath9k - running as AP and a few kinds of mobile phones as client, when PS-Poll - is heavily used - - Cc: stable@vger.kernel.org - Signed-off-by: Felix Fietkau <nbd@openwrt.org> - -commit d5d87a37bbd6066b2c3c5d0bd0fe2a6e2ea45cc5 -Author: Felix Fietkau <nbd@openwrt.org> -Date: Fri Feb 21 11:39:59 2014 +0100 - - ath9k: list more reset causes in debugfs - - Number of MAC hangs and stuck beacons were missing - - Signed-off-by: Felix Fietkau <nbd@openwrt.org> - -commit d84856012e0f10fe598a5ad3b7b869397a089e07 -Author: Johannes Berg <johannes.berg@intel.com> -Date: Thu Feb 20 11:19:58 2014 +0100 - - mac80211: fix station wakeup powersave race - - Consider the following (relatively unlikely) scenario: - 1) station goes to sleep while frames are buffered in driver - 2) driver blocks wakeup (until no more frames are buffered) - 3) station wakes up again - 4) driver unblocks wakeup - - In this case, the current mac80211 code will do the following: - 1) WLAN_STA_PS_STA set - 2) WLAN_STA_PS_DRIVER set - 3) - nothing - - 4) WLAN_STA_PS_DRIVER cleared - - As a result, no frames will be delivered to the client, even - though it is awake, until it sends another frame to us that - triggers ieee80211_sta_ps_deliver_wakeup() in sta_ps_end(). - - Since we now take the PS spinlock, we can fix this while at - the same time removing the complexity with the pending skb - queue function. This was broken since my commit 50a9432daeec - ("mac80211: fix powersaving clients races") due to removing - the clearing of WLAN_STA_PS_STA in the RX path. - - While at it, fix a cleanup path issue when a station is - removed while the driver is still blocking its wakeup. - - Signed-off-by: Johannes Berg <johannes.berg@intel.com> - -commit 798f2786602cbe93e6b928299614aa36ebf50692 -Author: Johannes Berg <johannes.berg@intel.com> -Date: Mon Feb 17 20:49:03 2014 +0100 - - mac80211: insert stations before adding to driver - - There's a race condition in mac80211 because we add stations - to the internal lists after adding them to the driver, which - means that (for example) the following can happen: - 1. a station connects and is added - 2. first, it is added to the driver - 3. then, it is added to the mac80211 lists - - If the station goes to sleep between steps 2 and 3, and the - firmware/hardware records it as being asleep, mac80211 will - never instruct the driver to wake it up again as it never - realized it went to sleep since the RX path discarded the - frame as a "spurious class 3 frame", no station entry was - present yet. - - Fix this by adding the station in software first, and only - then adding it to the driver. That way, any state that the - driver changes will be reflected properly in mac80211's - station state. The problematic part is the roll-back if the - driver fails to add the station, in that case a bit more is - needed. To not make that overly complex prevent starting BA - sessions in the meantime. - - Signed-off-by: Johannes Berg <johannes.berg@intel.com> - -commit b9ba6a520cb07ab3aa7aaaf9ce4a0bc7a6bc06fe -Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com> -Date: Thu Feb 20 09:22:11 2014 +0200 - - mac80211: fix AP powersave TX vs. wakeup race - - There is a race between the TX path and the STA wakeup: while - a station is sleeping, mac80211 buffers frames until it wakes - up, then the frames are transmitted. However, the RX and TX - path are concurrent, so the packet indicating wakeup can be - processed while a packet is being transmitted. - - This can lead to a situation where the buffered frames list - is emptied on the one side, while a frame is being added on - the other side, as the station is still seen as sleeping in - the TX path. - - As a result, the newly added frame will not be send anytime - soon. It might be sent much later (and out of order) when the - station goes to sleep and wakes up the next time. - - Additionally, it can lead to the crash below. - - Fix all this by synchronising both paths with a new lock. - Both path are not fastpath since they handle PS situations. - - In a later patch we'll remove the extra skb queue locks to - reduce locking overhead. - - BUG: unable to handle kernel - NULL pointer dereference at 000000b0 - IP: [<ff6f1791>] ieee80211_report_used_skb+0x11/0x3e0 [mac80211] - *pde = 00000000 - Oops: 0000 [#1] SMP DEBUG_PAGEALLOC - EIP: 0060:[<ff6f1791>] EFLAGS: 00210282 CPU: 1 - EIP is at ieee80211_report_used_skb+0x11/0x3e0 [mac80211] - EAX: e5900da0 EBX: 00000000 ECX: 00000001 EDX: 00000000 - ESI: e41d00c0 EDI: e5900da0 EBP: ebe458e4 ESP: ebe458b0 - DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 - CR0: 8005003b CR2: 000000b0 CR3: 25a78000 CR4: 000407d0 - DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 - DR6: ffff0ff0 DR7: 00000400 - Process iperf (pid: 3934, ti=ebe44000 task=e757c0b0 task.ti=ebe44000) - iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command LQ_CMD (#4e), seq: 0x0903, 92 bytes at 3[3]:9 - Stack: - e403b32c ebe458c4 00200002 00200286 e403b338 ebe458cc c10960bb e5900da0 - ff76a6ec ebe458d8 00000000 e41d00c0 e5900da0 ebe458f0 ff6f1b75 e403b210 - ebe4598c ff723dc1 00000000 ff76a6ec e597c978 e403b758 00000002 00000002 - Call Trace: - [<ff6f1b75>] ieee80211_free_txskb+0x15/0x20 [mac80211] - [<ff723dc1>] invoke_tx_handlers+0x1661/0x1780 [mac80211] - [<ff7248a5>] ieee80211_tx+0x75/0x100 [mac80211] - [<ff7249bf>] ieee80211_xmit+0x8f/0xc0 [mac80211] - [<ff72550e>] ieee80211_subif_start_xmit+0x4fe/0xe20 [mac80211] - [<c149ef70>] dev_hard_start_xmit+0x450/0x950 - [<c14b9aa9>] sch_direct_xmit+0xa9/0x250 - [<c14b9c9b>] __qdisc_run+0x4b/0x150 - [<c149f732>] dev_queue_xmit+0x2c2/0xca0 - - Cc: stable@vger.kernel.org - Reported-by: Yaara Rozenblum <yaara.rozenblum@intel.com> - Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> - Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com> - [reword commit log, use a separate lock] - Signed-off-by: Johannes Berg <johannes.berg@intel.com> - -commit 80e419de0dff38436b30d363311c625766193f86 -Author: Inbal Hacohen <Inbal.Hacohen@intel.com> -Date: Wed Feb 12 09:32:27 2014 +0200 - - cfg80211: bugfix in regulatory user hint process - - After processing hint_user, we would want to schedule the - timeout work only if we are actually waiting to CRDA. This happens - when the status is not "IGNORE" nor "ALREADY_SET". - - Signed-off-by: Inbal Hacohen <Inbal.Hacohen@intel.com> - Signed-off-by: Johannes Berg <johannes.berg@intel.com> - -commit 6514c93afede55284e2cb63359aadedb85884c80 -Author: Jouni Malinen <jouni@qca.qualcomm.com> -Date: Tue Feb 18 20:41:08 2014 +0200 - - ath9k: Enable U-APSD AP mode support - - mac80211 handles the actual operations, so ath9k can just indicate - support for this. Based on initial tests, this combination seems to - work fine. - - Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> - -commit a63caf0a357ad5c1f08d6b7827dc76c451445017 -Author: Stanislaw Gruszka <sgruszka@redhat.com> -Date: Wed Feb 19 13:15:17 2014 +0100 - - ath9k: protect tid->sched check - - We check tid->sched without a lock taken on ath_tx_aggr_sleep(). That - is race condition which can result of doing list_del(&tid->list) twice - (second time with poisoned list node) and cause crash like shown below: - - [424271.637220] BUG: unable to handle kernel paging request at 00100104 - [424271.637328] IP: [<f90fc072>] ath_tx_aggr_sleep+0x62/0xe0 [ath9k] - ... - [424271.639953] Call Trace: - [424271.639998] [<f90f6900>] ? ath9k_get_survey+0x110/0x110 [ath9k] - [424271.640083] [<f90f6942>] ath9k_sta_notify+0x42/0x50 [ath9k] - [424271.640177] [<f809cfef>] sta_ps_start+0x8f/0x1c0 [mac80211] - [424271.640258] [<c10f730e>] ? free_compound_page+0x2e/0x40 - [424271.640346] [<f809e915>] ieee80211_rx_handlers+0x9d5/0x2340 [mac80211] - [424271.640437] [<c112f048>] ? kmem_cache_free+0x1d8/0x1f0 - [424271.640510] [<c1345a84>] ? kfree_skbmem+0x34/0x90 - [424271.640578] [<c10fc23c>] ? put_page+0x2c/0x40 - [424271.640640] [<c1345a84>] ? kfree_skbmem+0x34/0x90 - [424271.640706] [<c1345a84>] ? kfree_skbmem+0x34/0x90 - [424271.640787] [<f809dde3>] ? ieee80211_rx_handlers_result+0x73/0x1d0 [mac80211] - [424271.640897] [<f80a07a0>] ieee80211_prepare_and_rx_handle+0x520/0xad0 [mac80211] - [424271.641009] [<f809e22d>] ? ieee80211_rx_handlers+0x2ed/0x2340 [mac80211] - [424271.641104] [<c13846ce>] ? ip_output+0x7e/0xd0 - [424271.641182] [<f80a1057>] ieee80211_rx+0x307/0x7c0 [mac80211] - [424271.641266] [<f90fa6ee>] ath_rx_tasklet+0x88e/0xf70 [ath9k] - [424271.641358] [<f80a0f2c>] ? ieee80211_rx+0x1dc/0x7c0 [mac80211] - [424271.641445] [<f90f82db>] ath9k_tasklet+0xcb/0x130 [ath9k] - - Bug report: - https://bugzilla.kernel.org/show_bug.cgi?id=70551 - - Reported-and-tested-by: Max Sydorenko <maxim.stargazer@gmail.com> - Cc: stable@vger.kernel.org - Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> - -commit 82ed9e3ccc02797df2ffe4b78127c4cd5f799a41 -Author: Felix Fietkau <nbd@openwrt.org> -Date: Tue Feb 11 15:54:13 2014 +0100 - - mac80211: send control port protocol frames to the VO queue - - Improves reliability of wifi connections with WPA, since authentication - frames are prioritized over normal traffic and also typically exempt - from aggregation. - - Cc: stable@vger.kernel.org - Signed-off-by: Felix Fietkau <nbd@openwrt.org> - -commit d4426800f71e972feaa33e04c5801fc730627bdd -Author: Stanislaw Gruszka <stf_xl@wp.pl> -Date: Mon Feb 10 22:38:28 2014 +0100 - - rtl8187: fix regression on MIPS without coherent DMA - - This patch fixes regression caused by commit a16dad77634 "MIPS: Fix - potencial corruption". That commit fixes one corruption scenario in - cost of adding another one, which actually start to cause crashes - on Yeeloong laptop when rtl8187 driver is used. - - For correct DMA read operation on machines without DMA coherence, kernel - have to invalidate cache, such it will refill later with new data that - device wrote to memory, when that data is needed to process. We can only - invalidate full cache line. Hence when cache line includes both dma - buffer and some other data (written in cache, but not yet in main - memory), the other data can not hit memory due to invalidation. That - happen on rtl8187 where struct rtl8187_priv fields are located just - before and after small buffers that are passed to USB layer and DMA - is performed on them. - - To fix the problem we align buffers and reserve space after them to make - them match cache line. - - This patch does not resolve all possible MIPS problems entirely, for - that we have to assure that we always map cache aligned buffers for DMA, - what can be complex or even not possible. But patch fixes visible and - reproducible regression and seems other possible corruptions do not - happen in practice, since Yeeloong laptop works stable without rtl8187 - driver. - - Bug report: - https://bugzilla.kernel.org/show_bug.cgi?id=54391 - - Reported-by: Petr Pisar <petr.pisar@atlas.cz> - Bisected-by: Tom Li <biergaizi2009@gmail.com> - Reported-and-tested-by: Tom Li <biergaizi2009@gmail.com> - Cc: stable@vger.kernel.org - Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> - -commit e2f141d67ad1e7fe10aaab61811e8a409dfb2442 -Author: Sujith Manoharan <c_manoha@qca.qualcomm.com> -Date: Fri Feb 7 10:29:55 2014 +0530 - - ath9k: Calculate IQ-CAL median - - This patch adds a routine to calculate the median IQ correction - values for AR955x, which is used for outlier detection. - The normal method which is used for all other chips is - bypassed for AR955x. - - Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> - -commit c52a6fce0820c8d0687443ab86058ae03b478c8f -Author: Sujith Manoharan <c_manoha@qca.qualcomm.com> -Date: Fri Feb 7 10:29:54 2014 +0530 - - ath9k: Expand the IQ coefficient array - - This will be used for storing data for mutiple - IQ calibration runs, for AR955x. - - Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> - -commit 034969ff5c2b6431d10e07c1938f0b916da85cc3 -Author: Sujith Manoharan <c_manoha@qca.qualcomm.com> -Date: Fri Feb 7 10:29:53 2014 +0530 - - ath9k: Modify IQ calibration for AR955x - - IQ calibration post-processing for AR955x is different - from other chips - instead of just doing it as part - of AGC calibration once, it is triggered 3 times and - a median is determined. This patch adds initial support - for changing the calibration behavior for AR955x. - - Also, to simplify things, a helper routine to issue/poll - AGC calibration is used. - - For non-AR955x chips, the iqcal_idx (which will be used - in subsequent patches) is set to zero. - - Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> - -commit 9b1ed6454e6f3511f24266be99b4e403f243f6a8 -Author: Sujith Manoharan <c_manoha@qca.qualcomm.com> -Date: Fri Feb 7 10:29:52 2014 +0530 - - ath9k: Fix magnitude/phase calculation - - Incorrect values are programmed in the registers - containing the IQ correction coefficients by the IQ-CAL - post-processing code. Fix this. - - Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> - -commit 36f93484f96f79171dcecb67c5ef0c3de22531a6 -Author: Sujith Manoharan <c_manoha@qca.qualcomm.com> -Date: Fri Feb 7 10:29:51 2014 +0530 - - ath9k: Rename ar9003_hw_tx_iqcal_load_avg_2_passes - - Use ar9003_hw_tx_iq_cal_outlier_detection instead. - - Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> - -commit 3af09a7f5d21dd5fd15b973ce6a91a575da30417 -Author: Sujith Manoharan <c_manoha@qca.qualcomm.com> -Date: Fri Feb 7 10:29:50 2014 +0530 - - ath9k: Check explicitly for IQ calibration - - In chips like AR955x, the initvals contain the information - whether IQ calibration is to be done in the HW when an - AGC calibration is triggered. Check if IQ-CAL is enabled - in the initvals before flagging 'txiqcal_done' as true. - - Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> - -commit cb4969634b93c4643a32cc3fbd27d2b288b25771 -Author: Sujith Manoharan <c_manoha@qca.qualcomm.com> -Date: Fri Feb 7 10:29:49 2014 +0530 - - ath9k: Fix IQ cal post processing for SoC - - Calibration data is not reused for SoC chips, so - call ar9003_hw_tx_iq_cal_post_proc() with the correct - argument. The 'is_reusable' flag is currently used - only for PC-OEM chips, but it makes things clearer to - specify it explicity. - - Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> - -commit e138e0ef9560c46ce93dbb22a728a57888e94d1c -Author: Sujith Manoharan <c_manoha@qca.qualcomm.com> -Date: Mon Feb 3 13:31:37 2014 +0530 - - ath9k: Fix TX power calculation - - The commit, "ath9k_hw: Fix incorrect Tx control power in AR9003 template" - fixed the incorrect values in the eeprom templates, but if - boards have already been calibrated with incorrect values, - they would still be using the wrong TX power. Fix this by assigning - a default value in such cases. - - Cc: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> - Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> - -commit b9f268b5b01331c3c82179abca551429450e9417 -Author: Michal Kazior <michal.kazior@tieto.com> -Date: Wed Jan 29 14:22:27 2014 +0100 - - cfg80211: consider existing DFS interfaces - - It was possible to break interface combinations in - the following way: - - combo 1: iftype = AP, num_ifaces = 2, num_chans = 2, - combo 2: iftype = AP, num_ifaces = 1, num_chans = 1, radar = HT20 - - With the above interface combinations it was - possible to: - - step 1. start AP on DFS channel by matching combo 2 - step 2. start AP on non-DFS channel by matching combo 1 - - This was possible beacuse (step 2) did not consider - if other interfaces require radar detection. - - The patch changes how cfg80211 tracks channels - - instead of channel itself now a complete chandef - is stored. - - Signed-off-by: Michal Kazior <michal.kazior@tieto.com> - Signed-off-by: Johannes Berg <johannes.berg@intel.com> - -commit bc9c62f5f511cc395c62dbf4cdd437f23db53b28 -Author: Antonio Quartulli <antonio@open-mesh.com> -Date: Wed Jan 29 17:53:43 2014 +0100 - - cfg80211: fix channel configuration in IBSS join - - When receiving an IBSS_JOINED event select the BSS object - based on the {bssid, channel} couple rather than the bssid - only. - With the current approach if another cell having the same - BSSID (but using a different channel) exists then cfg80211 - picks up the wrong BSS object. - The result is a mismatching channel configuration between - cfg80211 and the driver, that can lead to any sort of - problem. - - The issue can be triggered by having an IBSS sitting on - given channel and then asking the driver to create a new - cell using the same BSSID but with a different frequency. - By passing the channel to cfg80211_get_bss() we can solve - this ambiguity and retrieve/create the correct BSS object. - All the users of cfg80211_ibss_joined() have been changed - accordingly. - - Moreover WARN when cfg80211_ibss_joined() gets a NULL - channel as argument and remove a bogus call of the same - function in ath6kl (it does not make sense to call - cfg80211_ibss_joined() with a zero BSSID on ibss-leave). - - Cc: Kalle Valo <kvalo@qca.qualcomm.com> - Cc: Arend van Spriel <arend@broadcom.com> - Cc: Bing Zhao <bzhao@marvell.com> - Cc: Jussi Kivilinna <jussi.kivilinna@iki.fi> - Cc: libertas-dev@lists.infradead.org - Acked-by: Kalle Valo <kvalo@qca.qualcomm.com> - Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> - [minor code cleanup in ath6kl] - Signed-off-by: Johannes Berg <johannes.berg@intel.com> - -commit 7e0c41cb41f215aba2c39b1c237bb4d42ec49a85 -Author: Johannes Berg <johannes.berg@intel.com> -Date: Fri Jan 24 14:41:44 2014 +0100 - - mac80211: fix bufferable MMPDU RX handling - - Action, disassoc and deauth frames are bufferable, and as such don't - have the PM bit in the frame control field reserved which means we - need to react to the bit when receiving in such a frame. - - Fix this by introducing a new helper ieee80211_is_bufferable_mmpdu() - and using it for the RX path that currently ignores the PM bit in - any non-data frames for doze->wake transitions, but listens to it in - all frames for wake->doze transitions, both of which are wrong. - - Also use the new helper in the TX path to clean up the code. - - Signed-off-by: Johannes Berg <johannes.berg@intel.com> - -commit fc0df6d2343636e3f48a069330d5b972e3d8659d -Author: Janusz Dziedzic <janusz.dziedzic@tieto.com> -Date: Fri Jan 24 14:29:21 2014 +0100 - - cfg80211: set preset_chandef after channel switch - - Set preset_chandef in channel switch notification. - In other case we will have old preset_chandef. - - Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> - Signed-off-by: Johannes Berg <johannes.berg@intel.com> - -commit cdec895e2344987ff171cece96e25d7407a3ebf6 -Author: Simon Wunderlich <simon@open-mesh.com> -Date: Fri Jan 24 23:48:29 2014 +0100 - - mac80211: send ibss probe responses with noack flag - - Responding to probe requests for scanning clients will often create - excessive retries, as it happens quite often that the scanning client - already left the channel. Therefore do it like hostapd and send probe - responses for wildcard SSID only once by using the noack flag. - - Signed-off-by: Simon Wunderlich <simon@open-mesh.com> - [fix typo & 'wildcard SSID' in commit log] - Signed-off-by: Johannes Berg <johannes.berg@intel.com> - -commit 0b865d1e6b9c05052adae9315df7cb195dc60c3b -Author: Luciano Coelho <luciano.coelho@intel.com> -Date: Tue Jan 28 17:09:08 2014 +0200 - - mac80211: ibss: remove unnecessary call to release channel - - The ieee80211_vif_use_channel() function calls - ieee80211_vif_release_channel(), so there's no need to call it - explicitly in __ieee80211_sta_join_ibss(). - - Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> - Signed-off-by: Johannes Berg <johannes.berg@intel.com> - -commit e1b6c17e971f0a51ff86c2dac2584c63cd999cd7 -Author: Michal Kazior <michal.kazior@tieto.com> -Date: Wed Jan 29 07:56:21 2014 +0100 - - mac80211: add missing CSA locking - - The patch adds a missing sdata lock and adds a few - lockdeps for easier maintenance. - - Signed-off-by: Michal Kazior <michal.kazior@tieto.com> - Signed-off-by: Johannes Berg <johannes.berg@intel.com> - -commit ad17ba7d14d225b109b73c177cd446afb8050598 -Author: Michal Kazior <michal.kazior@tieto.com> -Date: Wed Jan 29 07:56:20 2014 +0100 - - mac80211: fix sdata->radar_required locking - - radar_required setting wasn't protected by - local->mtx in some places. This should prevent - from scanning/radar detection/roc colliding. - - Signed-off-by: Michal Kazior <michal.kazior@tieto.com> - Signed-off-by: Johannes Berg <johannes.berg@intel.com> - -commit 5fcd5f1808813a3d9e502fd756e01bee8a79c85d -Author: Michal Kazior <michal.kazior@tieto.com> -Date: Wed Jan 29 07:56:19 2014 +0100 - - mac80211: move csa_active setting in STA CSA - - The sdata->vif.csa_active could be left set after, - e.g. channel context constraints check fail in STA - mode leaving the interface in a strange state for - a brief period of time until it is disconnected. - This was harmless but ugly. - - Signed-off-by: Michal Kazior <michal.kazior@tieto.com> - Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> - Signed-off-by: Johannes Berg <johannes.berg@intel.com> - -commit e486da4b7eed71821c6b4c1bb9ac62ffd3ab13e9 -Author: Michal Kazior <michal.kazior@tieto.com> -Date: Wed Jan 29 07:56:18 2014 +0100 - - mac80211: fix possible memory leak on AP CSA failure - - If CSA for AP interface failed and the interface - was not stopped afterwards another CSA request - would leak sdata->u.ap.next_beacon. - - Signed-off-by: Michal Kazior <michal.kazior@tieto.com> - Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> - Signed-off-by: Johannes Berg <johannes.berg@intel.com> - -commit 3a77ba08940682bf3d52cf14f980337324af9d4a -Author: Johannes Berg <johannes.berg@intel.com> -Date: Sat Feb 1 00:33:29 2014 +0100 - - mac80211: fix fragmentation code, particularly for encryption - - The "new" fragmentation code (since my rewrite almost 5 years ago) - erroneously sets skb->len rather than using skb_trim() to adjust - the length of the first fragment after copying out all the others. - This leaves the skb tail pointer pointing to after where the data - originally ended, and thus causes the encryption MIC to be written - at that point, rather than where it belongs: immediately after the - data. - - The impact of this is that if software encryption is done, then - a) encryption doesn't work for the first fragment, the connection - becomes unusable as the first fragment will never be properly - verified at the receiver, the MIC is practically guaranteed to - be wrong - b) we leak up to 8 bytes of plaintext (!) of the packet out into - the air - - This is only mitigated by the fact that many devices are capable - of doing encryption in hardware, in which case this can't happen - as the tail pointer is irrelevant in that case. Additionally, - fragmentation is not used very frequently and would normally have - to be configured manually. - - Fix this by using skb_trim() properly. - - Cc: stable@vger.kernel.org - Fixes: 2de8e0d999b8 ("mac80211: rewrite fragmentation") - Reported-by: Jouni Malinen <j@w1.fi> - Signed-off-by: Johannes Berg <johannes.berg@intel.com> - -commit de5f242e0c10e841017e37eb8c38974a642dbca8 -Author: Sujith Manoharan <c_manoha@qca.qualcomm.com> -Date: Tue Jan 28 06:21:59 2014 +0530 - - ath9k: Fix build error on ARM - - Use mdelay instead of udelay to fix this error: - - ERROR: "__bad_udelay" [drivers/net/wireless/ath/ath9k/ath9k_hw.ko] undefined! - make[1]: *** [__modpost] Error 1 - make: *** [modules] Error 2 - - Reported-by: Josh Boyer <jwboyer@fedoraproject.org> - Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> - -commit 8e3ea7a51dfc61810fcefd947f6edcf61125252a -Author: Geert Uytterhoeven <geert@linux-m68k.org> -Date: Sun Jan 26 11:53:21 2014 +0100 - - ath9k: Fix uninitialized variable in ath9k_has_tx_pending() - - drivers/net/wireless/ath/ath9k/main.c: In function ‘ath9k_has_tx_pending’: - drivers/net/wireless/ath/ath9k/main.c:1869: warning: ‘npend’ may be used uninitialized in this function - - Introduced by commit 10e2318103f5941aa70c318afe34bc41f1b98529 ("ath9k: - optimize ath9k_flush"). - - Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> - -commit a4a634a6937ebdd827fa58e8fcdb8ca49a3769f6 -Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com> -Date: Mon Jan 27 11:07:42 2014 +0200 - - mac80211: release the channel in error path in start_ap - - When the driver cannot start the AP or when the assignement - of the beacon goes wrong, we need to unassign the vif. - - Cc: stable@vger.kernel.org - Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> - Signed-off-by: Johannes Berg <johannes.berg@intel.com> - -commit dfb6889a75c601aedb7450b7e606668e77da6679 -Author: Johannes Berg <johannes.berg@intel.com> -Date: Wed Jan 22 11:14:19 2014 +0200 - - cfg80211: send scan results from work queue - - Due to the previous commit, when a scan finishes, it is in theory - possible to hit the following sequence: - 1. interface starts being removed - 2. scan is cancelled by driver and cfg80211 is notified - 3. scan done work is scheduled - 4. interface is removed completely, rdev->scan_req is freed, - event sent to userspace but scan done work remains pending - 5. new scan is requested on another virtual interface - 6. scan done work runs, freeing the still-running scan - - To fix this situation, hang on to the scan done message and block - new scans while that is the case, and only send the message from - the work function, regardless of whether the scan_req is already - freed from interface removal. This makes step 5 above impossible - and changes step 6 to be - 5. scan done work runs, sending the scan done message - - As this can't work for wext, so we send the message immediately, - but this shouldn't be an issue since we still return -EBUSY. - - Signed-off-by: Johannes Berg <johannes.berg@intel.com> - -commit 45b7ab41fc08627d9a8428cb413d5d84662a9707 -Author: Johannes Berg <johannes.berg@intel.com> -Date: Wed Jan 22 11:14:18 2014 +0200 - - cfg80211: fix scan done race - - When an interface/wdev is removed, any ongoing scan should be - cancelled by the driver. This will make it call cfg80211, which - only queues a work struct. If interface/wdev removal is quick - enough, this can leave the scan request pending and processed - only after the interface is gone, causing a use-after-free. - - Fix this by making sure the scan request is not pending after - the interface is destroyed. We can't flush or cancel the work - item due to locking concerns, but when it'll run it shouldn't - find anything to do. This leaves a potential issue, if a new - scan gets requested before the work runs, it prematurely stops - the running scan, potentially causing another crash. I'll fix - that in the next patch. - - This was particularly observed with P2P_DEVICE wdevs, likely - because freeing them is quicker than freeing netdevs. - - Reported-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> - Fixes: 4a58e7c38443 ("cfg80211: don't "leak" uncompleted scans") - Signed-off-by: Johannes Berg <johannes.berg@intel.com> - -commit ae04fa489ab31b5a10d3cc8399f52761175d4321 -Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com> -Date: Thu Jan 23 14:28:16 2014 +0200 - - mac80211: avoid deadlock revealed by lockdep - - sdata->u.ap.request_smps_work can’t be flushed synchronously - under wdev_lock(wdev) since ieee80211_request_smps_ap_work - itself locks the same lock. - While at it, reset the driver_smps_mode when the ap is - stopped to its default: OFF. - - This solves: - - ====================================================== - [ INFO: possible circular locking dependency detected ] - 3.12.0-ipeer+ #2 Tainted: G O - ------------------------------------------------------- - rmmod/2867 is trying to acquire lock: - ((&sdata->u.ap.request_smps_work)){+.+...}, at: [<c105b8d0>] flush_work+0x0/0x90 - - but task is already holding lock: - (&wdev->mtx){+.+.+.}, at: [<f9b32626>] cfg80211_stop_ap+0x26/0x230 [cfg80211] - - which lock already depends on the new lock. - - the existing dependency chain (in reverse order) is: - - -> #1 (&wdev->mtx){+.+.+.}: - [<c10aefa9>] lock_acquire+0x79/0xe0 - [<c1607a1a>] mutex_lock_nested+0x4a/0x360 - [<fb06288b>] ieee80211_request_smps_ap_work+0x2b/0x50 [mac80211] - [<c105cdd8>] process_one_work+0x198/0x450 - [<c105d469>] worker_thread+0xf9/0x320 - [<c10669ff>] kthread+0x9f/0xb0 - [<c1613397>] ret_from_kernel_thread+0x1b/0x28 - - -> #0 ((&sdata->u.ap.request_smps_work)){+.+...}: - [<c10ae9df>] __lock_acquire+0x183f/0x1910 - [<c10aefa9>] lock_acquire+0x79/0xe0 - [<c105b917>] flush_work+0x47/0x90 - [<c105d867>] __cancel_work_timer+0x67/0xe0 - [<c105d90f>] cancel_work_sync+0xf/0x20 - [<fb0765cc>] ieee80211_stop_ap+0x8c/0x340 [mac80211] - [<f9b3268c>] cfg80211_stop_ap+0x8c/0x230 [cfg80211] - [<f9b0d8f9>] cfg80211_leave+0x79/0x100 [cfg80211] - [<f9b0da72>] cfg80211_netdev_notifier_call+0xf2/0x4f0 [cfg80211] - [<c160f2c9>] notifier_call_chain+0x59/0x130 - [<c106c6de>] __raw_notifier_call_chain+0x1e/0x30 - [<c106c70f>] raw_notifier_call_chain+0x1f/0x30 - [<c14f8213>] call_netdevice_notifiers_info+0x33/0x70 - [<c14f8263>] call_netdevice_notifiers+0x13/0x20 - [<c14f82a4>] __dev_close_many+0x34/0xb0 - [<c14f83fe>] dev_close_many+0x6e/0xc0 - [<c14f9c77>] rollback_registered_many+0xa7/0x1f0 - [<c14f9dd4>] unregister_netdevice_many+0x14/0x60 - [<fb06f4d9>] ieee80211_remove_interfaces+0xe9/0x170 [mac80211] - [<fb055116>] ieee80211_unregister_hw+0x56/0x110 [mac80211] - [<fa3e9396>] iwl_op_mode_mvm_stop+0x26/0xe0 [iwlmvm] - [<f9b9d8ca>] _iwl_op_mode_stop+0x3a/0x70 [iwlwifi] - [<f9b9d96f>] iwl_opmode_deregister+0x6f/0x90 [iwlwifi] - [<fa405179>] __exit_compat+0xd/0x19 [iwlmvm] - [<c10b8bf9>] SyS_delete_module+0x179/0x2b0 - [<c1613421>] sysenter_do_call+0x12/0x32 - - Fixes: 687da132234f ("mac80211: implement SMPS for AP") - Cc: <stable@vger.kernel.org> [3.13] - Reported-by: Ilan Peer <ilan.peer@intel.com> - Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> - Signed-off-by: Johannes Berg <johannes.berg@intel.com> - -commit 178b205e96217164fd7c30113464250d0b6f5eca -Author: Johannes Berg <johannes.berg@intel.com> -Date: Thu Jan 23 16:32:29 2014 +0100 - - cfg80211: re-enable 5/10 MHz support - - Unfortunately I forgot this during the merge window, but the - patch seems small enough to go in as a fix. The userspace API - bug that was the reason for disabling it has long been fixed. - - Signed-off-by: Johannes Berg <johannes.berg@intel.com> - -commit 110a1c79acda14edc83b7c8dc5af9c7ddd23eb61 -Author: Pontus Fuchs <pontus.fuchs@gmail.com> -Date: Thu Jan 16 15:00:40 2014 +0100 - - nl80211: Reset split_start when netlink skb is exhausted - - When the netlink skb is exhausted split_start is left set. In the - subsequent retry, with a larger buffer, the dump is continued from the - failing point instead of from the beginning. - - This was causing my rt28xx based USB dongle to now show up when - running "iw list" with an old iw version without split dump support. - - Cc: stable@vger.kernel.org - Fixes: 3713b4e364ef ("nl80211: allow splitting wiphy information in dumps") - Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> - [avoid the entire workaround when state->split is set] - Signed-off-by: Johannes Berg <johannes.berg@intel.com> - -commit b4c31b45ffc7ef110fa9ecc34d7878fe7c5b9da4 -Author: Eliad Peller <eliad@wizery.com> -Date: Sun Jan 12 11:06:37 2014 +0200 - - mac80211: move roc cookie assignment earlier - - ieee80211_start_roc_work() might add a new roc - to existing roc, and tell cfg80211 it has already - started. - - However, this might happen before the roc cookie - was set, resulting in REMAIN_ON_CHANNEL (started) - event with null cookie. Consequently, it can make - wpa_supplicant go out of sync. - - Fix it by setting the roc cookie earlier. - - Cc: stable@vger.kernel.org - Signed-off-by: Eliad Peller <eliad@wizery.com> - Signed-off-by: Johannes Berg <johannes.berg@intel.com> - -commit cfdc9157bfd7bcf88ab4dae08873a9907eba984c -Author: Johannes Berg <johannes.berg@intel.com> -Date: Fri Jan 24 14:06:29 2014 +0100 - - nl80211: send event when AP operation is stopped - - There are a few cases, e.g. suspend, where an AP interface is - stopped by the kernel rather than by userspace request, most - commonly when suspending. To let userspace know about this, - send the NL80211_CMD_STOP_AP command as an event every time - an AP interface is stopped. This also happens when userspace - did in fact request the AP stop, but that's not a problem. - - For full-MAC drivers this may need to be extended to also - cover cases where the device stopped the AP operation for - some reason, this a bit more complicated because then all - cfg80211 state also needs to be reset; such API is not part - of this patch. - - Signed-off-by: Johannes Berg <johannes.berg@intel.com> - -commit d5d567eda7704f190379ca852a8f9a4112e3eee3 -Author: Johannes Berg <johannes.berg@intel.com> -Date: Thu Jan 23 16:20:29 2014 +0100 - - mac80211: add length check in ieee80211_is_robust_mgmt_frame() - - A few places weren't checking that the frame passed to the - function actually has enough data even though the function - clearly documents it must have a payload byte. Make this - safer by changing the function to take an skb and checking - the length inside. The old version is preserved for now as - the rtl* drivers use it and don't have a correct skb. - - Signed-off-by: Johannes Berg <johannes.berg@intel.com> - -commit f8f6d212a047fc65c7d3442dfc038f65517236fc -Author: Johannes Berg <johannes.berg@intel.com> -Date: Fri Jan 24 10:53:53 2014 +0100 - - nl80211: fix scheduled scan RSSI matchset attribute confusion - - The scheduled scan matchsets were intended to be a list of filters, - with the found BSS having to pass at least one of them to be passed - to the host. When the RSSI attribute was added, however, this was - broken and currently wpa_supplicant adds that attribute in its own - matchset; however, it doesn't intend that to mean that anything - that passes the RSSI filter should be passed to the host, instead - it wants it to mean that everything needs to also have higher RSSI. - - This is semantically problematic because we have a list of filters - like [ SSID1, SSID2, SSID3, RSSI ] with no real indication which - one should be OR'ed and which one AND'ed. - - To fix this, move the RSSI filter attribute into each matchset. As - we need to stay backward compatible, treat a matchset with only the - RSSI attribute as a "default RSSI filter" for all other matchsets, - but only if there are other matchsets (an RSSI-only matchset by - itself is still desirable.) - - To make driver implementation easier, keep a global min_rssi_thold - for the entire request as well. The only affected driver is ath6kl. - - I found this when I looked into the code after Raja Mani submitted - a patch fixing the n_match_sets calculation to disregard the RSSI, - but that patch didn't address the semantic issue. - - Reported-by: Raja Mani <rmani@qti.qualcomm.com> - Acked-by: Luciano Coelho <luciano.coelho@intel.com> - Signed-off-by: Johannes Berg <johannes.berg@intel.com> - -commit de553e8545e65a6dc4e45f43df7e1443d4291922 -Author: Johannes Berg <johannes.berg@intel.com> -Date: Fri Jan 24 10:17:47 2014 +0100 - - nl80211: check nla_parse() return values - - If there's a policy, then nla_parse() return values must be - checked, otherwise the policy is useless and there's nothing - that ensures the attributes are actually what we expect them - to be. - - Signed-off-by: Johannes Berg <johannes.berg@intel.com> - -commit 652204a0733e9e1c54661d6f9d36e2e1e3b22bb1 -Author: Karl Beldan <karl.beldan@rivierawaves.com> -Date: Thu Jan 23 20:06:34 2014 +0100 - - mac80211: send {ADD,DEL}BA on AC_VO like other mgmt frames, as per spec - - ATM, {ADD,DEL}BA and BAR frames are sent on the AC matching the TID of - the BA parameters. In the discussion [1] about this patch, Johannes - recalled that it fixed some races with the DELBA and indeed this - behavior was introduced in [2]. - While [2] is right for the BARs, the part queueing the {ADD,DEL}BAs on - their BA params TID AC violates the spec and is more a workaround for - some drivers. Helmut expressed some concerns wrt such drivers, in - particular DELBAs in rt2x00. - - ATM, DELBAs are sent after a driver has called (hence "purposely") - ieee80211_start_tx_ba_cb_irqsafe and Johannes and Emmanuel gave some - details wrt intentions behind the split of the IEEE80211_AMPDU_TX_STOP_* - given to the driver ampdu_action supposed to call this function, which - could prove handy to people trying to do the right thing in faulty - drivers (if their fw/hw don't get in their way). - - [1] http://mid.gmane.org/1390391564-18481-1-git-send-email-karl.beldan@gmail.com - [2] Commit: cf6bb79ad828 ("mac80211: Use appropriate TID for sending BAR, ADDBA and DELBA frames") - - Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> - Cc: Helmut Schaa <helmut.schaa@googlemail.com> - Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> - Signed-off-by: Johannes Berg <johannes.berg@intel.com> ---- a/drivers/net/wireless/ath/ath6kl/cfg80211.c -+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c -@@ -790,7 +790,7 @@ void ath6kl_cfg80211_connect_event(struc - if (nw_type & ADHOC_NETWORK) { - ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "ad-hoc %s selected\n", - nw_type & ADHOC_CREATOR ? "creator" : "joiner"); -- cfg80211_ibss_joined(vif->ndev, bssid, GFP_KERNEL); -+ cfg80211_ibss_joined(vif->ndev, bssid, chan, GFP_KERNEL); - cfg80211_put_bss(ar->wiphy, bss); - return; - } -@@ -861,13 +861,9 @@ void ath6kl_cfg80211_disconnect_event(st - } - - if (vif->nw_type & ADHOC_NETWORK) { -- if (vif->wdev.iftype != NL80211_IFTYPE_ADHOC) { -+ if (vif->wdev.iftype != NL80211_IFTYPE_ADHOC) - ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, - "%s: ath6k not in ibss mode\n", __func__); -- return; -- } -- memset(bssid, 0, ETH_ALEN); -- cfg80211_ibss_joined(vif->ndev, bssid, GFP_KERNEL); - return; - } - -@@ -3256,6 +3252,15 @@ static int ath6kl_cfg80211_sscan_start(s - struct ath6kl_vif *vif = netdev_priv(dev); - u16 interval; - int ret, rssi_thold; -+ int n_match_sets = request->n_match_sets; -+ -+ /* -+ * If there's a matchset w/o an SSID, then assume it's just for -+ * the RSSI (nothing else is currently supported) and ignore it. -+ * The device only supports a global RSSI filter that we set below. -+ */ -+ if (n_match_sets == 1 && !request->match_sets[0].ssid.ssid_len) -+ n_match_sets = 0; - - if (ar->state != ATH6KL_STATE_ON) - return -EIO; -@@ -3268,11 +3273,11 @@ static int ath6kl_cfg80211_sscan_start(s - ret = ath6kl_set_probed_ssids(ar, vif, request->ssids, - request->n_ssids, - request->match_sets, -- request->n_match_sets); -+ n_match_sets); - if (ret < 0) - return ret; - -- if (!request->n_match_sets) { -+ if (!n_match_sets) { - ret = ath6kl_wmi_bssfilter_cmd(ar->wmi, vif->fw_vif_idx, - ALL_BSS_FILTER, 0); - if (ret < 0) -@@ -3286,12 +3291,12 @@ static int ath6kl_cfg80211_sscan_start(s - - if (test_bit(ATH6KL_FW_CAPABILITY_RSSI_SCAN_THOLD, - ar->fw_capabilities)) { -- if (request->rssi_thold <= NL80211_SCAN_RSSI_THOLD_OFF) -+ if (request->min_rssi_thold <= NL80211_SCAN_RSSI_THOLD_OFF) - rssi_thold = 0; -- else if (request->rssi_thold < -127) -+ else if (request->min_rssi_thold < -127) - rssi_thold = -127; - else -- rssi_thold = request->rssi_thold; -+ rssi_thold = request->min_rssi_thold; - - ret = ath6kl_wmi_set_rssi_filter_cmd(ar->wmi, vif->fw_vif_idx, - rssi_thold); ---- a/drivers/net/wireless/ath/ath9k/hw.c -+++ b/drivers/net/wireless/ath/ath9k/hw.c -@@ -1316,7 +1316,7 @@ static bool ath9k_hw_set_reset(struct at - if (AR_SREV_9300_20_OR_LATER(ah)) - udelay(50); - else if (AR_SREV_9100(ah)) -- udelay(10000); -+ mdelay(10); - else - udelay(100); - -@@ -1534,7 +1534,7 @@ EXPORT_SYMBOL(ath9k_hw_check_nav); - bool ath9k_hw_check_alive(struct ath_hw *ah) - { - int count = 50; -- u32 reg; -+ u32 reg, last_val; - - if (AR_SREV_9300(ah)) - return !ath9k_hw_detect_mac_hang(ah); -@@ -1542,9 +1542,14 @@ bool ath9k_hw_check_alive(struct ath_hw - if (AR_SREV_9285_12_OR_LATER(ah)) - return true; - -+ last_val = REG_READ(ah, AR_OBS_BUS_1); - do { - reg = REG_READ(ah, AR_OBS_BUS_1); -+ if (reg != last_val) -+ return true; - -+ udelay(1); -+ last_val = reg; - if ((reg & 0x7E7FFFEF) == 0x00702400) - continue; - -@@ -2051,9 +2056,8 @@ static bool ath9k_hw_set_power_awake(str - - REG_SET_BIT(ah, AR_RTC_FORCE_WAKE, - AR_RTC_FORCE_WAKE_EN); -- - if (AR_SREV_9100(ah)) -- udelay(10000); -+ mdelay(10); - else - udelay(50); - ---- a/drivers/net/wireless/ath/ath9k/main.c -+++ b/drivers/net/wireless/ath/ath9k/main.c -@@ -451,7 +451,7 @@ void ath9k_tasklet(unsigned long data) - * interrupts are enabled in the reset routine. - */ - atomic_inc(&ah->intr_ref_cnt); -- ath_dbg(common, ANY, "FATAL: Skipping interrupts\n"); -+ ath_dbg(common, RESET, "FATAL: Skipping interrupts\n"); - goto out; - } - -@@ -471,7 +471,7 @@ void ath9k_tasklet(unsigned long data) - * interrupts are enabled in the reset routine. - */ - atomic_inc(&ah->intr_ref_cnt); -- ath_dbg(common, ANY, -+ ath_dbg(common, RESET, - "BB_WATCHDOG: Skipping interrupts\n"); - goto out; - } -@@ -484,7 +484,7 @@ void ath9k_tasklet(unsigned long data) - type = RESET_TYPE_TX_GTT; - ath9k_queue_reset(sc, type); - atomic_inc(&ah->intr_ref_cnt); -- ath_dbg(common, ANY, -+ ath_dbg(common, RESET, - "GTT: Skipping interrupts\n"); - goto out; - } -@@ -1866,7 +1866,7 @@ static void ath9k_set_coverage_class(str - - static bool ath9k_has_tx_pending(struct ath_softc *sc) - { -- int i, npend; -+ int i, npend = 0; - - for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) { - if (!ATH_TXQ_SETUP(sc, i)) ---- a/drivers/net/wireless/iwlwifi/mvm/scan.c -+++ b/drivers/net/wireless/iwlwifi/mvm/scan.c -@@ -595,6 +595,9 @@ static void iwl_scan_offload_build_ssid( - * config match list. - */ - for (i = 0; i < req->n_match_sets && i < PROBE_OPTION_MAX; i++) { -+ /* skip empty SSID matchsets */ -+ if (!req->match_sets[i].ssid.ssid_len) -+ continue; - scan->direct_scan[i].id = WLAN_EID_SSID; - scan->direct_scan[i].len = req->match_sets[i].ssid.ssid_len; - memcpy(scan->direct_scan[i].ssid, req->match_sets[i].ssid.ssid, ---- a/drivers/net/wireless/rtlwifi/rtl8188ee/trx.c -+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/trx.c -@@ -452,7 +452,7 @@ bool rtl88ee_rx_query_desc(struct ieee80 - /* During testing, hdr was NULL */ - return false; - } -- if ((ieee80211_is_robust_mgmt_frame(hdr)) && -+ if ((_ieee80211_is_robust_mgmt_frame(hdr)) && - (ieee80211_has_protected(hdr->frame_control))) - rx_status->flag &= ~RX_FLAG_DECRYPTED; - else ---- a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c -+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c -@@ -393,7 +393,7 @@ bool rtl92ce_rx_query_desc(struct ieee80 - /* In testing, hdr was NULL here */ - return false; - } -- if ((ieee80211_is_robust_mgmt_frame(hdr)) && -+ if ((_ieee80211_is_robust_mgmt_frame(hdr)) && - (ieee80211_has_protected(hdr->frame_control))) - rx_status->flag &= ~RX_FLAG_DECRYPTED; - else ---- a/drivers/net/wireless/rtlwifi/rtl8192se/trx.c -+++ b/drivers/net/wireless/rtlwifi/rtl8192se/trx.c -@@ -310,7 +310,7 @@ bool rtl92se_rx_query_desc(struct ieee80 - /* during testing, hdr was NULL here */ - return false; - } -- if ((ieee80211_is_robust_mgmt_frame(hdr)) && -+ if ((_ieee80211_is_robust_mgmt_frame(hdr)) && - (ieee80211_has_protected(hdr->frame_control))) - rx_status->flag &= ~RX_FLAG_DECRYPTED; - else ---- a/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c -+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c -@@ -334,7 +334,7 @@ bool rtl8723ae_rx_query_desc(struct ieee - /* during testing, hdr could be NULL here */ - return false; - } -- if ((ieee80211_is_robust_mgmt_frame(hdr)) && -+ if ((_ieee80211_is_robust_mgmt_frame(hdr)) && - (ieee80211_has_protected(hdr->frame_control))) - rx_status->flag &= ~RX_FLAG_DECRYPTED; - else ---- a/include/linux/ieee80211.h -+++ b/include/linux/ieee80211.h -@@ -597,6 +597,20 @@ static inline int ieee80211_is_qos_nullf - } - - /** -+ * ieee80211_is_bufferable_mmpdu - check if frame is bufferable MMPDU -+ * @fc: frame control field in little-endian byteorder -+ */ -+static inline bool ieee80211_is_bufferable_mmpdu(__le16 fc) -+{ -+ /* IEEE 802.11-2012, definition of "bufferable management frame"; -+ * note that this ignores the IBSS special case. */ -+ return ieee80211_is_mgmt(fc) && -+ (ieee80211_is_action(fc) || -+ ieee80211_is_disassoc(fc) || -+ ieee80211_is_deauth(fc)); -+} -+ -+/** - * ieee80211_is_first_frag - check if IEEE80211_SCTL_FRAG is not set - * @seq_ctrl: frame sequence control bytes in little-endian byteorder - */ -@@ -2192,10 +2206,10 @@ static inline u8 *ieee80211_get_DA(struc - } - - /** -- * ieee80211_is_robust_mgmt_frame - check if frame is a robust management frame -+ * _ieee80211_is_robust_mgmt_frame - check if frame is a robust management frame - * @hdr: the frame (buffer must include at least the first octet of payload) - */ --static inline bool ieee80211_is_robust_mgmt_frame(struct ieee80211_hdr *hdr) -+static inline bool _ieee80211_is_robust_mgmt_frame(struct ieee80211_hdr *hdr) - { - if (ieee80211_is_disassoc(hdr->frame_control) || - ieee80211_is_deauth(hdr->frame_control)) -@@ -2224,6 +2238,17 @@ static inline bool ieee80211_is_robust_m - } - - /** -+ * ieee80211_is_robust_mgmt_frame - check if skb contains a robust mgmt frame -+ * @skb: the skb containing the frame, length will be checked -+ */ -+static inline bool ieee80211_is_robust_mgmt_frame(struct sk_buff *skb) -+{ -+ if (skb->len < 25) -+ return false; -+ return _ieee80211_is_robust_mgmt_frame((void *)skb->data); -+} -+ -+/** - * ieee80211_is_public_action - check if frame is a public action frame - * @hdr: the frame - * @len: length of the frame ---- a/include/net/cfg80211.h -+++ b/include/net/cfg80211.h -@@ -1395,9 +1395,11 @@ struct cfg80211_scan_request { - * struct cfg80211_match_set - sets of attributes to match - * - * @ssid: SSID to be matched -+ * @rssi_thold: don't report scan results below this threshold (in s32 dBm) - */ - struct cfg80211_match_set { - struct cfg80211_ssid ssid; -+ s32 rssi_thold; - }; - - /** -@@ -1420,7 +1422,8 @@ struct cfg80211_match_set { - * @dev: the interface - * @scan_start: start time of the scheduled scan - * @channels: channels to scan -- * @rssi_thold: don't report scan results below this threshold (in s32 dBm) -+ * @min_rssi_thold: for drivers only supporting a single threshold, this -+ * contains the minimum over all matchsets - */ - struct cfg80211_sched_scan_request { - struct cfg80211_ssid *ssids; -@@ -1433,7 +1436,7 @@ struct cfg80211_sched_scan_request { - u32 flags; - struct cfg80211_match_set *match_sets; - int n_match_sets; -- s32 rssi_thold; -+ s32 min_rssi_thold; - - /* internal */ - struct wiphy *wiphy; -@@ -3130,8 +3133,8 @@ struct cfg80211_cached_keys; - * @identifier: (private) Identifier used in nl80211 to identify this - * wireless device if it has no netdev - * @current_bss: (private) Used by the internal configuration code -- * @channel: (private) Used by the internal configuration code to track -- * the user-set AP, monitor and WDS channel -+ * @chandef: (private) Used by the internal configuration code to track -+ * the user-set channel definition. - * @preset_chandef: (private) Used by the internal configuration code to - * track the channel to be used for AP later - * @bssid: (private) Used by the internal configuration code -@@ -3195,9 +3198,7 @@ struct wireless_dev { - - struct cfg80211_internal_bss *current_bss; /* associated / joined */ - struct cfg80211_chan_def preset_chandef; -- -- /* for AP and mesh channel tracking */ -- struct ieee80211_channel *channel; -+ struct cfg80211_chan_def chandef; - - bool ibss_fixed; - bool ibss_dfs_possible; -@@ -3879,6 +3880,7 @@ void cfg80211_michael_mic_failure(struct - * - * @dev: network device - * @bssid: the BSSID of the IBSS joined -+ * @channel: the channel of the IBSS joined - * @gfp: allocation flags - * - * This function notifies cfg80211 that the device joined an IBSS or -@@ -3888,7 +3890,8 @@ void cfg80211_michael_mic_failure(struct - * with the locally generated beacon -- this guarantees that there is - * always a scan result for this IBSS. cfg80211 will handle the rest. - */ --void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, gfp_t gfp); -+void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, -+ struct ieee80211_channel *channel, gfp_t gfp); - - /** - * cfg80211_notify_new_candidate - notify cfg80211 of a new mesh peer candidate ---- a/include/uapi/linux/nl80211.h -+++ b/include/uapi/linux/nl80211.h -@@ -2442,9 +2442,15 @@ enum nl80211_reg_rule_attr { - * enum nl80211_sched_scan_match_attr - scheduled scan match attributes - * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved - * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching, -- * only report BSS with matching SSID. -+ * only report BSS with matching SSID. - * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a -- * BSS in scan results. Filtering is turned off if not specified. -+ * BSS in scan results. Filtering is turned off if not specified. Note that -+ * if this attribute is in a match set of its own, then it is treated as -+ * the default value for all matchsets with an SSID, rather than being a -+ * matchset of its own without an RSSI filter. This is due to problems with -+ * how this API was implemented in the past. Also, due to the same problem, -+ * the only way to create a matchset with only an RSSI filter (with this -+ * attribute) is if there's only a single matchset with the RSSI attribute. - * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter - * attribute number currently defined - * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use ---- a/net/mac80211/agg-tx.c -+++ b/net/mac80211/agg-tx.c -@@ -107,7 +107,7 @@ static void ieee80211_send_addba_request - mgmt->u.action.u.addba_req.start_seq_num = - cpu_to_le16(start_seq_num << 4); - -- ieee80211_tx_skb_tid(sdata, skb, tid); -+ ieee80211_tx_skb(sdata, skb); - } - - void ieee80211_send_bar(struct ieee80211_vif *vif, u8 *ra, u16 tid, u16 ssn) ---- a/net/mac80211/cfg.c -+++ b/net/mac80211/cfg.c -@@ -970,9 +970,9 @@ static int ieee80211_start_ap(struct wip - /* TODO: make hostapd tell us what it wants */ - sdata->smps_mode = IEEE80211_SMPS_OFF; - sdata->needed_rx_chains = sdata->local->rx_chains; -- sdata->radar_required = params->radar_required; - - mutex_lock(&local->mtx); -+ sdata->radar_required = params->radar_required; - err = ieee80211_vif_use_channel(sdata, ¶ms->chandef, - IEEE80211_CHANCTX_SHARED); - mutex_unlock(&local->mtx); -@@ -1021,8 +1021,10 @@ static int ieee80211_start_ap(struct wip - IEEE80211_P2P_OPPPS_ENABLE_BIT; - - err = ieee80211_assign_beacon(sdata, ¶ms->beacon); -- if (err < 0) -+ if (err < 0) { -+ ieee80211_vif_release_channel(sdata); - return err; -+ } - changed |= err; - - err = drv_start_ap(sdata->local, sdata); -@@ -1032,6 +1034,7 @@ static int ieee80211_start_ap(struct wip - if (old) - kfree_rcu(old, rcu_head); - RCU_INIT_POINTER(sdata->u.ap.beacon, NULL); -+ ieee80211_vif_release_channel(sdata); - return err; - } - -@@ -1053,6 +1056,7 @@ static int ieee80211_change_beacon(struc - int err; - - sdata = IEEE80211_DEV_TO_SUB_IF(dev); -+ sdata_assert_lock(sdata); - - /* don't allow changing the beacon while CSA is in place - offset - * of channel switch counter may change -@@ -1080,6 +1084,8 @@ static int ieee80211_stop_ap(struct wiph - struct probe_resp *old_probe_resp; - struct cfg80211_chan_def chandef; - -+ sdata_assert_lock(sdata); -+ - old_beacon = sdata_dereference(sdata->u.ap.beacon, sdata); - if (!old_beacon) - return -ENOENT; -@@ -1090,8 +1096,6 @@ static int ieee80211_stop_ap(struct wiph - kfree(sdata->u.ap.next_beacon); - sdata->u.ap.next_beacon = NULL; - -- cancel_work_sync(&sdata->u.ap.request_smps_work); -- - /* turn off carrier for this interface and dependent VLANs */ - list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) - netif_carrier_off(vlan->dev); -@@ -1103,6 +1107,7 @@ static int ieee80211_stop_ap(struct wiph - kfree_rcu(old_beacon, rcu_head); - if (old_probe_resp) - kfree_rcu(old_probe_resp, rcu_head); -+ sdata->u.ap.driver_smps_mode = IEEE80211_SMPS_OFF; - - __sta_info_flush(sdata, true); - ieee80211_free_keys(sdata, true); -@@ -1988,6 +1993,9 @@ static int ieee80211_change_bss(struct w - - band = ieee80211_get_sdata_band(sdata); - -+ if (WARN_ON(!wiphy->bands[band])) -+ return -EINVAL; -+ - if (params->use_cts_prot >= 0) { - sdata->vif.bss_conf.use_cts_prot = params->use_cts_prot; - changed |= BSS_CHANGED_ERP_CTS_PROT; -@@ -2638,6 +2646,24 @@ static int ieee80211_start_roc_work(stru - INIT_DELAYED_WORK(&roc->work, ieee80211_sw_roc_work); - INIT_LIST_HEAD(&roc->dependents); - -+ /* -+ * cookie is either the roc cookie (for normal roc) -+ * or the SKB (for mgmt TX) -+ */ -+ if (!txskb) { -+ /* local->mtx protects this */ -+ local->roc_cookie_counter++; -+ roc->cookie = local->roc_cookie_counter; -+ /* wow, you wrapped 64 bits ... more likely a bug */ -+ if (WARN_ON(roc->cookie == 0)) { -+ roc->cookie = 1; -+ local->roc_cookie_counter++; -+ } -+ *cookie = roc->cookie; -+ } else { -+ *cookie = (unsigned long)txskb; -+ } -+ - /* if there's one pending or we're scanning, queue this one */ - if (!list_empty(&local->roc_list) || - local->scanning || local->radar_detect_enabled) -@@ -2772,24 +2798,6 @@ static int ieee80211_start_roc_work(stru - if (!queued) - list_add_tail(&roc->list, &local->roc_list); - -- /* -- * cookie is either the roc cookie (for normal roc) -- * or the SKB (for mgmt TX) -- */ -- if (!txskb) { -- /* local->mtx protects this */ -- local->roc_cookie_counter++; -- roc->cookie = local->roc_cookie_counter; -- /* wow, you wrapped 64 bits ... more likely a bug */ -- if (WARN_ON(roc->cookie == 0)) { -- roc->cookie = 1; -- local->roc_cookie_counter++; -- } -- *cookie = roc->cookie; -- } else { -- *cookie = (unsigned long)txskb; -- } -- - return 0; - } - -@@ -3004,8 +3012,10 @@ void ieee80211_csa_finalize_work(struct - if (!ieee80211_sdata_running(sdata)) - goto unlock; - -- sdata->radar_required = sdata->csa_radar_required; -+ sdata_assert_lock(sdata); -+ - mutex_lock(&local->mtx); -+ sdata->radar_required = sdata->csa_radar_required; - err = ieee80211_vif_change_channel(sdata, &changed); - mutex_unlock(&local->mtx); - if (WARN_ON(err < 0)) -@@ -3022,13 +3032,13 @@ void ieee80211_csa_finalize_work(struct - switch (sdata->vif.type) { - case NL80211_IFTYPE_AP: - err = ieee80211_assign_beacon(sdata, sdata->u.ap.next_beacon); -+ kfree(sdata->u.ap.next_beacon); -+ sdata->u.ap.next_beacon = NULL; -+ - if (err < 0) - goto unlock; - - changed |= err; -- kfree(sdata->u.ap.next_beacon); -- sdata->u.ap.next_beacon = NULL; -- - ieee80211_bss_info_change_notify(sdata, err); - break; - case NL80211_IFTYPE_ADHOC: -@@ -3066,7 +3076,7 @@ int ieee80211_channel_switch(struct wiph - struct ieee80211_if_mesh __maybe_unused *ifmsh; - int err, num_chanctx; - -- lockdep_assert_held(&sdata->wdev.mtx); -+ sdata_assert_lock(sdata); - - if (!list_empty(&local->roc_list) || local->scanning) - return -EBUSY; ---- a/net/mac80211/ht.c -+++ b/net/mac80211/ht.c -@@ -375,7 +375,7 @@ void ieee80211_send_delba(struct ieee802 - mgmt->u.action.u.delba.params = cpu_to_le16(params); - mgmt->u.action.u.delba.reason_code = cpu_to_le16(reason_code); - -- ieee80211_tx_skb_tid(sdata, skb, tid); -+ ieee80211_tx_skb(sdata, skb); - } - - void ieee80211_process_delba(struct ieee80211_sub_if_data *sdata, -@@ -466,7 +466,9 @@ void ieee80211_request_smps_ap_work(stru - u.ap.request_smps_work); - - sdata_lock(sdata); -- __ieee80211_request_smps_ap(sdata, sdata->u.ap.driver_smps_mode); -+ if (sdata_dereference(sdata->u.ap.beacon, sdata)) -+ __ieee80211_request_smps_ap(sdata, -+ sdata->u.ap.driver_smps_mode); - sdata_unlock(sdata); - } - ---- a/net/mac80211/iface.c -+++ b/net/mac80211/iface.c -@@ -770,12 +770,19 @@ static void ieee80211_do_stop(struct iee - - ieee80211_roc_purge(local, sdata); - -- if (sdata->vif.type == NL80211_IFTYPE_STATION) -+ switch (sdata->vif.type) { -+ case NL80211_IFTYPE_STATION: - ieee80211_mgd_stop(sdata); -- -- if (sdata->vif.type == NL80211_IFTYPE_ADHOC) -+ break; -+ case NL80211_IFTYPE_ADHOC: - ieee80211_ibss_stop(sdata); -- -+ break; -+ case NL80211_IFTYPE_AP: -+ cancel_work_sync(&sdata->u.ap.request_smps_work); -+ break; -+ default: -+ break; -+ } - - /* - * Remove all stations associated with this interface. -@@ -827,7 +834,9 @@ static void ieee80211_do_stop(struct iee - cancel_work_sync(&local->dynamic_ps_enable_work); - - cancel_work_sync(&sdata->recalc_smps); -+ sdata_lock(sdata); - sdata->vif.csa_active = false; -+ sdata_unlock(sdata); - cancel_work_sync(&sdata->csa_finalize_work); - - cancel_delayed_work_sync(&sdata->dfs_cac_timer_work); ---- a/net/mac80211/rx.c -+++ b/net/mac80211/rx.c -@@ -599,10 +599,10 @@ static int ieee80211_is_unicast_robust_m - { - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; - -- if (skb->len < 24 || is_multicast_ether_addr(hdr->addr1)) -+ if (is_multicast_ether_addr(hdr->addr1)) - return 0; - -- return ieee80211_is_robust_mgmt_frame(hdr); -+ return ieee80211_is_robust_mgmt_frame(skb); - } - - -@@ -610,10 +610,10 @@ static int ieee80211_is_multicast_robust - { - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; - -- if (skb->len < 24 || !is_multicast_ether_addr(hdr->addr1)) -+ if (!is_multicast_ether_addr(hdr->addr1)) - return 0; - -- return ieee80211_is_robust_mgmt_frame(hdr); -+ return ieee80211_is_robust_mgmt_frame(skb); - } - - -@@ -626,7 +626,7 @@ static int ieee80211_get_mmie_keyidx(str - if (skb->len < 24 + sizeof(*mmie) || !is_multicast_ether_addr(hdr->da)) - return -1; - -- if (!ieee80211_is_robust_mgmt_frame((struct ieee80211_hdr *) hdr)) -+ if (!ieee80211_is_robust_mgmt_frame(skb)) - return -1; /* not a robust management frame */ - - mmie = (struct ieee80211_mmie *) -@@ -1128,6 +1128,13 @@ static void sta_ps_end(struct sta_info * - sta->sta.addr, sta->sta.aid); - - if (test_sta_flag(sta, WLAN_STA_PS_DRIVER)) { -+ /* -+ * Clear the flag only if the other one is still set -+ * so that the TX path won't start TX'ing new frames -+ * directly ... In the case that the driver flag isn't -+ * set ieee80211_sta_ps_deliver_wakeup() will clear it. -+ */ -+ clear_sta_flag(sta, WLAN_STA_PS_STA); - ps_dbg(sta->sdata, "STA %pM aid %d driver-ps-blocked\n", - sta->sta.addr, sta->sta.aid); - return; -@@ -1311,18 +1318,15 @@ ieee80211_rx_h_sta_process(struct ieee80 - !ieee80211_has_morefrags(hdr->frame_control) && - !(status->rx_flags & IEEE80211_RX_DEFERRED_RELEASE) && - (rx->sdata->vif.type == NL80211_IFTYPE_AP || -- rx->sdata->vif.type == NL80211_IFTYPE_AP_VLAN)) { -+ rx->sdata->vif.type == NL80211_IFTYPE_AP_VLAN) && -+ /* PM bit is only checked in frames where it isn't reserved, -+ * in AP mode it's reserved in non-bufferable management frames -+ * (cf. IEEE 802.11-2012 8.2.4.1.7 Power Management field) -+ */ -+ (!ieee80211_is_mgmt(hdr->frame_control) || -+ ieee80211_is_bufferable_mmpdu(hdr->frame_control))) { - if (test_sta_flag(sta, WLAN_STA_PS_STA)) { -- /* -- * Ignore doze->wake transitions that are -- * indicated by non-data frames, the standard -- * is unclear here, but for example going to -- * PS mode and then scanning would cause a -- * doze->wake transition for the probe request, -- * and that is clearly undesirable. -- */ -- if (ieee80211_is_data(hdr->frame_control) && -- !ieee80211_has_pm(hdr->frame_control)) -+ if (!ieee80211_has_pm(hdr->frame_control)) - sta_ps_end(sta); - } else { - if (ieee80211_has_pm(hdr->frame_control)) -@@ -1845,8 +1849,7 @@ static int ieee80211_drop_unencrypted_mg - * having configured keys. - */ - if (unlikely(ieee80211_is_action(fc) && !rx->key && -- ieee80211_is_robust_mgmt_frame( -- (struct ieee80211_hdr *) rx->skb->data))) -+ ieee80211_is_robust_mgmt_frame(rx->skb))) - return -EACCES; - } - ---- a/net/mac80211/tx.c -+++ b/net/mac80211/tx.c -@@ -452,8 +452,7 @@ static int ieee80211_use_mfp(__le16 fc, - if (sta == NULL || !test_sta_flag(sta, WLAN_STA_MFP)) - return 0; - -- if (!ieee80211_is_robust_mgmt_frame((struct ieee80211_hdr *) -- skb->data)) -+ if (!ieee80211_is_robust_mgmt_frame(skb)) - return 0; - - return 1; -@@ -478,6 +477,20 @@ ieee80211_tx_h_unicast_ps_buf(struct iee - sta->sta.addr, sta->sta.aid, ac); - if (tx->local->total_ps_buffered >= TOTAL_MAX_TX_BUFFER) - purge_old_ps_buffers(tx->local); -+ -+ /* sync with ieee80211_sta_ps_deliver_wakeup */ -+ spin_lock(&sta->ps_lock); -+ /* -+ * STA woke up the meantime and all the frames on ps_tx_buf have -+ * been queued to pending queue. No reordering can happen, go -+ * ahead and Tx the packet. -+ */ -+ if (!test_sta_flag(sta, WLAN_STA_PS_STA) && -+ !test_sta_flag(sta, WLAN_STA_PS_DRIVER)) { -+ spin_unlock(&sta->ps_lock); -+ return TX_CONTINUE; -+ } -+ - if (skb_queue_len(&sta->ps_tx_buf[ac]) >= STA_MAX_TX_BUFFER) { - struct sk_buff *old = skb_dequeue(&sta->ps_tx_buf[ac]); - ps_dbg(tx->sdata, -@@ -492,6 +505,7 @@ ieee80211_tx_h_unicast_ps_buf(struct iee - info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING; - info->flags &= ~IEEE80211_TX_TEMPORARY_FLAGS; - skb_queue_tail(&sta->ps_tx_buf[ac], tx->skb); -+ spin_unlock(&sta->ps_lock); - - if (!timer_pending(&local->sta_cleanup)) - mod_timer(&local->sta_cleanup, -@@ -525,9 +539,7 @@ ieee80211_tx_h_ps_buf(struct ieee80211_t - - /* only deauth, disassoc and action are bufferable MMPDUs */ - if (ieee80211_is_mgmt(hdr->frame_control) && -- !ieee80211_is_deauth(hdr->frame_control) && -- !ieee80211_is_disassoc(hdr->frame_control) && -- !ieee80211_is_action(hdr->frame_control)) { -+ !ieee80211_is_bufferable_mmpdu(hdr->frame_control)) { - if (tx->flags & IEEE80211_TX_UNICAST) - info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER; - return TX_CONTINUE; -@@ -567,7 +579,7 @@ ieee80211_tx_h_select_key(struct ieee802 - tx->key = key; - else if (ieee80211_is_mgmt(hdr->frame_control) && - is_multicast_ether_addr(hdr->addr1) && -- ieee80211_is_robust_mgmt_frame(hdr) && -+ ieee80211_is_robust_mgmt_frame(tx->skb) && - (key = rcu_dereference(tx->sdata->default_mgmt_key))) - tx->key = key; - else if (is_multicast_ether_addr(hdr->addr1) && -@@ -582,12 +594,12 @@ ieee80211_tx_h_select_key(struct ieee802 - tx->key = NULL; - else if (tx->skb->protocol == tx->sdata->control_port_protocol) - tx->key = NULL; -- else if (ieee80211_is_robust_mgmt_frame(hdr) && -+ else if (ieee80211_is_robust_mgmt_frame(tx->skb) && - !(ieee80211_is_action(hdr->frame_control) && - tx->sta && test_sta_flag(tx->sta, WLAN_STA_MFP))) - tx->key = NULL; - else if (ieee80211_is_mgmt(hdr->frame_control) && -- !ieee80211_is_robust_mgmt_frame(hdr)) -+ !ieee80211_is_robust_mgmt_frame(tx->skb)) - tx->key = NULL; - else { - I802_DEBUG_INC(tx->local->tx_handlers_drop_unencrypted); -@@ -878,7 +890,7 @@ static int ieee80211_fragment(struct iee - } - - /* adjust first fragment's length */ -- skb->len = hdrlen + per_fragm; -+ skb_trim(skb, hdrlen + per_fragm); - return 0; - } - -@@ -2900,7 +2912,7 @@ ieee80211_get_buffered_bc(struct ieee802 - cpu_to_le16(IEEE80211_FCTL_MOREDATA); - } - -- if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) -+ if (sdata->vif.type == NL80211_IFTYPE_AP) - sdata = IEEE80211_DEV_TO_SUB_IF(skb->dev); - if (!ieee80211_tx_prepare(sdata, &tx, skb)) - break; ---- a/net/mac80211/wpa.c -+++ b/net/mac80211/wpa.c -@@ -499,7 +499,7 @@ ieee80211_crypto_ccmp_decrypt(struct iee - hdrlen = ieee80211_hdrlen(hdr->frame_control); - - if (!ieee80211_is_data(hdr->frame_control) && -- !ieee80211_is_robust_mgmt_frame(hdr)) -+ !ieee80211_is_robust_mgmt_frame(skb)) - return RX_CONTINUE; - - data_len = skb->len - hdrlen - IEEE80211_CCMP_HDR_LEN - ---- a/net/wireless/ap.c -+++ b/net/wireless/ap.c -@@ -27,9 +27,10 @@ static int __cfg80211_stop_ap(struct cfg - err = rdev_stop_ap(rdev, dev); - if (!err) { - wdev->beacon_interval = 0; -- wdev->channel = NULL; -+ memset(&wdev->chandef, 0, sizeof(wdev->chandef)); - wdev->ssid_len = 0; - rdev_set_qos_map(rdev, dev, NULL); -+ nl80211_send_ap_stopped(wdev); - } - - return err; ---- a/net/wireless/core.c -+++ b/net/wireless/core.c -@@ -203,8 +203,11 @@ void cfg80211_stop_p2p_device(struct cfg - - rdev->opencount--; - -- WARN_ON(rdev->scan_req && rdev->scan_req->wdev == wdev && -- !rdev->scan_req->notified); -+ if (rdev->scan_req && rdev->scan_req->wdev == wdev) { -+ if (WARN_ON(!rdev->scan_req->notified)) -+ rdev->scan_req->aborted = true; -+ ___cfg80211_scan_done(rdev, false); -+ } - } - - static int cfg80211_rfkill_set_block(void *data, bool blocked) -@@ -447,9 +450,6 @@ int wiphy_register(struct wiphy *wiphy) - int i; - u16 ifmodes = wiphy->interface_modes; - -- /* support for 5/10 MHz is broken due to nl80211 API mess - disable */ -- wiphy->flags &= ~WIPHY_FLAG_SUPPORTS_5_10_MHZ; -- - /* - * There are major locking problems in nl80211/mac80211 for CSA, - * disable for all drivers until this has been reworked. -@@ -795,8 +795,6 @@ void cfg80211_leave(struct cfg80211_regi - default: - break; - } -- -- wdev->beacon_interval = 0; - } - - static int cfg80211_netdev_notifier_call(struct notifier_block *nb, -@@ -875,8 +873,11 @@ static int cfg80211_netdev_notifier_call - break; - case NETDEV_DOWN: - cfg80211_update_iface_num(rdev, wdev->iftype, -1); -- WARN_ON(rdev->scan_req && rdev->scan_req->wdev == wdev && -- !rdev->scan_req->notified); -+ if (rdev->scan_req && rdev->scan_req->wdev == wdev) { -+ if (WARN_ON(!rdev->scan_req->notified)) -+ rdev->scan_req->aborted = true; -+ ___cfg80211_scan_done(rdev, false); -+ } - - if (WARN_ON(rdev->sched_scan_req && - rdev->sched_scan_req->dev == wdev->netdev)) { ---- a/net/wireless/core.h -+++ b/net/wireless/core.h -@@ -62,6 +62,7 @@ struct cfg80211_registered_device { - struct rb_root bss_tree; - u32 bss_generation; - struct cfg80211_scan_request *scan_req; /* protected by RTNL */ -+ struct sk_buff *scan_msg; - struct cfg80211_sched_scan_request *sched_scan_req; - unsigned long suspend_at; - struct work_struct scan_done_wk; -@@ -210,6 +211,7 @@ struct cfg80211_event { - } dc; - struct { - u8 bssid[ETH_ALEN]; -+ struct ieee80211_channel *channel; - } ij; - }; - }; -@@ -257,7 +259,8 @@ int __cfg80211_leave_ibss(struct cfg8021 - struct net_device *dev, bool nowext); - int cfg80211_leave_ibss(struct cfg80211_registered_device *rdev, - struct net_device *dev, bool nowext); --void __cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid); -+void __cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, -+ struct ieee80211_channel *channel); - int cfg80211_ibss_wext_join(struct cfg80211_registered_device *rdev, - struct wireless_dev *wdev); - -@@ -361,7 +364,8 @@ int cfg80211_validate_key_settings(struc - struct key_params *params, int key_idx, - bool pairwise, const u8 *mac_addr); - void __cfg80211_scan_done(struct work_struct *wk); --void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev); -+void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev, -+ bool send_message); - void __cfg80211_sched_scan_results(struct work_struct *wk); - int __cfg80211_stop_sched_scan(struct cfg80211_registered_device *rdev, - bool driver_initiated); -@@ -441,7 +445,8 @@ static inline unsigned int elapsed_jiffi - void - cfg80211_get_chan_state(struct wireless_dev *wdev, - struct ieee80211_channel **chan, -- enum cfg80211_chan_mode *chanmode); -+ enum cfg80211_chan_mode *chanmode, -+ u8 *radar_detect); - - int cfg80211_set_monitor_channel(struct cfg80211_registered_device *rdev, - struct cfg80211_chan_def *chandef); ---- a/net/wireless/nl80211.c -+++ b/net/wireless/nl80211.c -@@ -1723,9 +1723,10 @@ static int nl80211_dump_wiphy(struct sk_ - * We can then retry with the larger buffer. - */ - if ((ret == -ENOBUFS || ret == -EMSGSIZE) && -- !skb->len && -+ !skb->len && !state->split && - cb->min_dump_alloc < 4096) { - cb->min_dump_alloc = 4096; -+ state->split_start = 0; - rtnl_unlock(); - return 1; - } -@@ -2047,10 +2048,12 @@ static int nl80211_set_wiphy(struct sk_b - nla_for_each_nested(nl_txq_params, - info->attrs[NL80211_ATTR_WIPHY_TXQ_PARAMS], - rem_txq_params) { -- nla_parse(tb, NL80211_TXQ_ATTR_MAX, -- nla_data(nl_txq_params), -- nla_len(nl_txq_params), -- txq_params_policy); -+ result = nla_parse(tb, NL80211_TXQ_ATTR_MAX, -+ nla_data(nl_txq_params), -+ nla_len(nl_txq_params), -+ txq_params_policy); -+ if (result) -+ goto bad_res; - result = parse_txq_params(tb, &txq_params); - if (result) - goto bad_res; -@@ -3289,7 +3292,7 @@ static int nl80211_start_ap(struct sk_bu - if (!err) { - wdev->preset_chandef = params.chandef; - wdev->beacon_interval = params.beacon_interval; -- wdev->channel = params.chandef.chan; -+ wdev->chandef = params.chandef; - wdev->ssid_len = params.ssid_len; - memcpy(wdev->ssid, params.ssid, wdev->ssid_len); - } -@@ -5210,9 +5213,11 @@ static int nl80211_set_reg(struct sk_buf - - nla_for_each_nested(nl_reg_rule, info->attrs[NL80211_ATTR_REG_RULES], - rem_reg_rules) { -- nla_parse(tb, NL80211_REG_RULE_ATTR_MAX, -- nla_data(nl_reg_rule), nla_len(nl_reg_rule), -- reg_rule_policy); -+ r = nla_parse(tb, NL80211_REG_RULE_ATTR_MAX, -+ nla_data(nl_reg_rule), nla_len(nl_reg_rule), -+ reg_rule_policy); -+ if (r) -+ goto bad_reg; - r = parse_reg_rule(tb, &rd->reg_rules[rule_idx]); - if (r) - goto bad_reg; -@@ -5277,7 +5282,7 @@ static int nl80211_trigger_scan(struct s - if (!rdev->ops->scan) - return -EOPNOTSUPP; - -- if (rdev->scan_req) { -+ if (rdev->scan_req || rdev->scan_msg) { - err = -EBUSY; - goto unlock; - } -@@ -5475,6 +5480,7 @@ static int nl80211_start_sched_scan(stru - enum ieee80211_band band; - size_t ie_len; - struct nlattr *tb[NL80211_SCHED_SCAN_MATCH_ATTR_MAX + 1]; -+ s32 default_match_rssi = NL80211_SCAN_RSSI_THOLD_OFF; - - if (!(rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_SCHED_SCAN) || - !rdev->ops->sched_scan_start) -@@ -5509,11 +5515,40 @@ static int nl80211_start_sched_scan(stru - if (n_ssids > wiphy->max_sched_scan_ssids) - return -EINVAL; - -- if (info->attrs[NL80211_ATTR_SCHED_SCAN_MATCH]) -+ /* -+ * First, count the number of 'real' matchsets. Due to an issue with -+ * the old implementation, matchsets containing only the RSSI attribute -+ * (NL80211_SCHED_SCAN_MATCH_ATTR_RSSI) are considered as the 'default' -+ * RSSI for all matchsets, rather than their own matchset for reporting -+ * all APs with a strong RSSI. This is needed to be compatible with -+ * older userspace that treated a matchset with only the RSSI as the -+ * global RSSI for all other matchsets - if there are other matchsets. -+ */ -+ if (info->attrs[NL80211_ATTR_SCHED_SCAN_MATCH]) { - nla_for_each_nested(attr, - info->attrs[NL80211_ATTR_SCHED_SCAN_MATCH], -- tmp) -- n_match_sets++; -+ tmp) { -+ struct nlattr *rssi; -+ -+ err = nla_parse(tb, NL80211_SCHED_SCAN_MATCH_ATTR_MAX, -+ nla_data(attr), nla_len(attr), -+ nl80211_match_policy); -+ if (err) -+ return err; -+ /* add other standalone attributes here */ -+ if (tb[NL80211_SCHED_SCAN_MATCH_ATTR_SSID]) { -+ n_match_sets++; -+ continue; -+ } -+ rssi = tb[NL80211_SCHED_SCAN_MATCH_ATTR_RSSI]; -+ if (rssi) -+ default_match_rssi = nla_get_s32(rssi); -+ } -+ } -+ -+ /* However, if there's no other matchset, add the RSSI one */ -+ if (!n_match_sets && default_match_rssi != NL80211_SCAN_RSSI_THOLD_OFF) -+ n_match_sets = 1; - - if (n_match_sets > wiphy->max_match_sets) - return -EINVAL; -@@ -5634,11 +5669,22 @@ static int nl80211_start_sched_scan(stru - tmp) { - struct nlattr *ssid, *rssi; - -- nla_parse(tb, NL80211_SCHED_SCAN_MATCH_ATTR_MAX, -- nla_data(attr), nla_len(attr), -- nl80211_match_policy); -+ err = nla_parse(tb, NL80211_SCHED_SCAN_MATCH_ATTR_MAX, -+ nla_data(attr), nla_len(attr), -+ nl80211_match_policy); -+ if (err) -+ goto out_free; - ssid = tb[NL80211_SCHED_SCAN_MATCH_ATTR_SSID]; - if (ssid) { -+ if (WARN_ON(i >= n_match_sets)) { -+ /* this indicates a programming error, -+ * the loop above should have verified -+ * things properly -+ */ -+ err = -EINVAL; -+ goto out_free; -+ } -+ - if (nla_len(ssid) > IEEE80211_MAX_SSID_LEN) { - err = -EINVAL; - goto out_free; -@@ -5647,15 +5693,28 @@ static int nl80211_start_sched_scan(stru - nla_data(ssid), nla_len(ssid)); - request->match_sets[i].ssid.ssid_len = - nla_len(ssid); -+ /* special attribute - old implemenation w/a */ -+ request->match_sets[i].rssi_thold = -+ default_match_rssi; -+ rssi = tb[NL80211_SCHED_SCAN_MATCH_ATTR_RSSI]; -+ if (rssi) -+ request->match_sets[i].rssi_thold = -+ nla_get_s32(rssi); - } -- rssi = tb[NL80211_SCHED_SCAN_MATCH_ATTR_RSSI]; -- if (rssi) -- request->rssi_thold = nla_get_u32(rssi); -- else -- request->rssi_thold = -- NL80211_SCAN_RSSI_THOLD_OFF; - i++; - } -+ -+ /* there was no other matchset, so the RSSI one is alone */ -+ if (i == 0) -+ request->match_sets[0].rssi_thold = default_match_rssi; -+ -+ request->min_rssi_thold = INT_MAX; -+ for (i = 0; i < n_match_sets; i++) -+ request->min_rssi_thold = -+ min(request->match_sets[i].rssi_thold, -+ request->min_rssi_thold); -+ } else { -+ request->min_rssi_thold = NL80211_SCAN_RSSI_THOLD_OFF; - } - - if (info->attrs[NL80211_ATTR_IE]) { -@@ -5751,7 +5810,7 @@ static int nl80211_start_radar_detection - - err = rdev->ops->start_radar_detection(&rdev->wiphy, dev, &chandef); - if (!err) { -- wdev->channel = chandef.chan; -+ wdev->chandef = chandef; - wdev->cac_started = true; - wdev->cac_start_time = jiffies; - } -@@ -7502,16 +7561,19 @@ static int nl80211_set_tx_bitrate_mask(s - * directly to the enum ieee80211_band values used in cfg80211. - */ - BUILD_BUG_ON(NL80211_MAX_SUPP_HT_RATES > IEEE80211_HT_MCS_MASK_LEN * 8); -- nla_for_each_nested(tx_rates, info->attrs[NL80211_ATTR_TX_RATES], rem) -- { -+ nla_for_each_nested(tx_rates, info->attrs[NL80211_ATTR_TX_RATES], rem) { - enum ieee80211_band band = nla_type(tx_rates); -+ int err; -+ - if (band < 0 || band >= IEEE80211_NUM_BANDS) - return -EINVAL; - sband = rdev->wiphy.bands[band]; - if (sband == NULL) - return -EINVAL; -- nla_parse(tb, NL80211_TXRATE_MAX, nla_data(tx_rates), -- nla_len(tx_rates), nl80211_txattr_policy); -+ err = nla_parse(tb, NL80211_TXRATE_MAX, nla_data(tx_rates), -+ nla_len(tx_rates), nl80211_txattr_policy); -+ if (err) -+ return err; - if (tb[NL80211_TXRATE_LEGACY]) { - mask.control[band].legacy = rateset_to_mask( - sband, -@@ -10054,40 +10116,31 @@ void nl80211_send_scan_start(struct cfg8 - NL80211_MCGRP_SCAN, GFP_KERNEL); - } - --void nl80211_send_scan_done(struct cfg80211_registered_device *rdev, -- struct wireless_dev *wdev) -+struct sk_buff *nl80211_build_scan_msg(struct cfg80211_registered_device *rdev, -+ struct wireless_dev *wdev, bool aborted) - { - struct sk_buff *msg; - - msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); - if (!msg) -- return; -+ return NULL; - - if (nl80211_send_scan_msg(msg, rdev, wdev, 0, 0, 0, -- NL80211_CMD_NEW_SCAN_RESULTS) < 0) { -+ aborted ? NL80211_CMD_SCAN_ABORTED : -+ NL80211_CMD_NEW_SCAN_RESULTS) < 0) { - nlmsg_free(msg); -- return; -+ return NULL; - } - -- genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0, -- NL80211_MCGRP_SCAN, GFP_KERNEL); -+ return msg; - } - --void nl80211_send_scan_aborted(struct cfg80211_registered_device *rdev, -- struct wireless_dev *wdev) -+void nl80211_send_scan_result(struct cfg80211_registered_device *rdev, -+ struct sk_buff *msg) - { -- struct sk_buff *msg; -- -- msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); - if (!msg) - return; - -- if (nl80211_send_scan_msg(msg, rdev, wdev, 0, 0, 0, -- NL80211_CMD_SCAN_ABORTED) < 0) { -- nlmsg_free(msg); -- return; -- } -- - genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0, - NL80211_MCGRP_SCAN, GFP_KERNEL); - } -@@ -11158,7 +11211,8 @@ void cfg80211_ch_switch_notify(struct ne - wdev->iftype != NL80211_IFTYPE_MESH_POINT)) - return; - -- wdev->channel = chandef->chan; -+ wdev->chandef = *chandef; -+ wdev->preset_chandef = *chandef; - nl80211_ch_switch_notify(rdev, dev, chandef, GFP_KERNEL); - } - EXPORT_SYMBOL(cfg80211_ch_switch_notify); -@@ -11673,6 +11727,35 @@ void cfg80211_crit_proto_stopped(struct - } - EXPORT_SYMBOL(cfg80211_crit_proto_stopped); - -+void nl80211_send_ap_stopped(struct wireless_dev *wdev) -+{ -+ struct wiphy *wiphy = wdev->wiphy; -+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy); -+ struct sk_buff *msg; -+ void *hdr; -+ -+ msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); -+ if (!msg) -+ return; -+ -+ hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_STOP_AP); -+ if (!hdr) -+ goto out; -+ -+ if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) || -+ nla_put_u32(msg, NL80211_ATTR_IFINDEX, wdev->netdev->ifindex) || -+ nla_put_u64(msg, NL80211_ATTR_WDEV, wdev_id(wdev))) -+ goto out; -+ -+ genlmsg_end(msg, hdr); -+ -+ genlmsg_multicast_netns(&nl80211_fam, wiphy_net(wiphy), msg, 0, -+ NL80211_MCGRP_MLME, GFP_KERNEL); -+ return; -+ out: -+ nlmsg_free(msg); -+} -+ - /* initialisation/exit functions */ - - int nl80211_init(void) ---- a/net/wireless/nl80211.h -+++ b/net/wireless/nl80211.h -@@ -8,10 +8,10 @@ void nl80211_exit(void); - void nl80211_notify_dev_rename(struct cfg80211_registered_device *rdev); - void nl80211_send_scan_start(struct cfg80211_registered_device *rdev, - struct wireless_dev *wdev); --void nl80211_send_scan_done(struct cfg80211_registered_device *rdev, -- struct wireless_dev *wdev); --void nl80211_send_scan_aborted(struct cfg80211_registered_device *rdev, -- struct wireless_dev *wdev); -+struct sk_buff *nl80211_build_scan_msg(struct cfg80211_registered_device *rdev, -+ struct wireless_dev *wdev, bool aborted); -+void nl80211_send_scan_result(struct cfg80211_registered_device *rdev, -+ struct sk_buff *msg); - void nl80211_send_sched_scan(struct cfg80211_registered_device *rdev, - struct net_device *netdev, u32 cmd); - void nl80211_send_sched_scan_results(struct cfg80211_registered_device *rdev, -@@ -74,6 +74,8 @@ nl80211_radar_notify(struct cfg80211_reg - enum nl80211_radar_event event, - struct net_device *netdev, gfp_t gfp); - -+void nl80211_send_ap_stopped(struct wireless_dev *wdev); -+ - void cfg80211_rdev_free_coalesce(struct cfg80211_registered_device *rdev); - - #endif /* __NET_WIRELESS_NL80211_H */ ---- a/net/wireless/scan.c -+++ b/net/wireless/scan.c -@@ -161,18 +161,25 @@ static void __cfg80211_bss_expire(struct - dev->bss_generation++; - } - --void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev) -+void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev, -+ bool send_message) - { - struct cfg80211_scan_request *request; - struct wireless_dev *wdev; -+ struct sk_buff *msg; - #ifdef CPTCFG_CFG80211_WEXT - union iwreq_data wrqu; - #endif - - ASSERT_RTNL(); - -- request = rdev->scan_req; -+ if (rdev->scan_msg) { -+ nl80211_send_scan_result(rdev, rdev->scan_msg); -+ rdev->scan_msg = NULL; -+ return; -+ } - -+ request = rdev->scan_req; - if (!request) - return; - -@@ -186,18 +193,16 @@ void ___cfg80211_scan_done(struct cfg802 - if (wdev->netdev) - cfg80211_sme_scan_done(wdev->netdev); - -- if (request->aborted) { -- nl80211_send_scan_aborted(rdev, wdev); -- } else { -- if (request->flags & NL80211_SCAN_FLAG_FLUSH) { -- /* flush entries from previous scans */ -- spin_lock_bh(&rdev->bss_lock); -- __cfg80211_bss_expire(rdev, request->scan_start); -- spin_unlock_bh(&rdev->bss_lock); -- } -- nl80211_send_scan_done(rdev, wdev); -+ if (!request->aborted && -+ request->flags & NL80211_SCAN_FLAG_FLUSH) { -+ /* flush entries from previous scans */ -+ spin_lock_bh(&rdev->bss_lock); -+ __cfg80211_bss_expire(rdev, request->scan_start); -+ spin_unlock_bh(&rdev->bss_lock); - } - -+ msg = nl80211_build_scan_msg(rdev, wdev, request->aborted); -+ - #ifdef CPTCFG_CFG80211_WEXT - if (wdev->netdev && !request->aborted) { - memset(&wrqu, 0, sizeof(wrqu)); -@@ -211,6 +216,11 @@ void ___cfg80211_scan_done(struct cfg802 - - rdev->scan_req = NULL; - kfree(request); -+ -+ if (!send_message) -+ rdev->scan_msg = msg; -+ else -+ nl80211_send_scan_result(rdev, msg); - } - - void __cfg80211_scan_done(struct work_struct *wk) -@@ -221,7 +231,7 @@ void __cfg80211_scan_done(struct work_st - scan_done_wk); - - rtnl_lock(); -- ___cfg80211_scan_done(rdev); -+ ___cfg80211_scan_done(rdev, true); - rtnl_unlock(); - } - -@@ -1079,7 +1089,7 @@ int cfg80211_wext_siwscan(struct net_dev - if (IS_ERR(rdev)) - return PTR_ERR(rdev); - -- if (rdev->scan_req) { -+ if (rdev->scan_req || rdev->scan_msg) { - err = -EBUSY; - goto out; - } -@@ -1481,7 +1491,7 @@ int cfg80211_wext_giwscan(struct net_dev - if (IS_ERR(rdev)) - return PTR_ERR(rdev); - -- if (rdev->scan_req) -+ if (rdev->scan_req || rdev->scan_msg) - return -EAGAIN; - - res = ieee80211_scan_results(rdev, info, extra, data->length); ---- a/net/wireless/sme.c -+++ b/net/wireless/sme.c -@@ -67,7 +67,7 @@ static int cfg80211_conn_scan(struct wir - ASSERT_RDEV_LOCK(rdev); - ASSERT_WDEV_LOCK(wdev); - -- if (rdev->scan_req) -+ if (rdev->scan_req || rdev->scan_msg) - return -EBUSY; - - if (wdev->conn->params.channel) ---- a/net/mac80211/mlme.c -+++ b/net/mac80211/mlme.c -@@ -1001,7 +1001,6 @@ ieee80211_sta_process_chanswitch(struct - } - - ifmgd->flags |= IEEE80211_STA_CSA_RECEIVED; -- sdata->vif.csa_active = true; - - mutex_lock(&local->chanctx_mtx); - if (local->use_chanctx) { -@@ -1039,6 +1038,7 @@ ieee80211_sta_process_chanswitch(struct - mutex_unlock(&local->chanctx_mtx); - - sdata->csa_chandef = csa_ie.chandef; -+ sdata->vif.csa_active = true; - - if (csa_ie.mode) - ieee80211_stop_queues_by_reason(&local->hw, ---- a/net/mac80211/chan.c -+++ b/net/mac80211/chan.c -@@ -196,6 +196,8 @@ static bool ieee80211_is_radar_required( - { - struct ieee80211_sub_if_data *sdata; - -+ lockdep_assert_held(&local->mtx); -+ - rcu_read_lock(); - list_for_each_entry_rcu(sdata, &local->interfaces, list) { - if (sdata->radar_required) { ---- a/net/mac80211/ibss.c -+++ b/net/mac80211/ibss.c -@@ -294,7 +294,6 @@ static void __ieee80211_sta_join_ibss(st - } - - mutex_lock(&local->mtx); -- ieee80211_vif_release_channel(sdata); - if (ieee80211_vif_use_channel(sdata, &chandef, - ifibss->fixed_channel ? - IEEE80211_CHANCTX_SHARED : -@@ -303,6 +302,7 @@ static void __ieee80211_sta_join_ibss(st - mutex_unlock(&local->mtx); - return; - } -+ sdata->radar_required = radar_required; - mutex_unlock(&local->mtx); - - memcpy(ifibss->bssid, bssid, ETH_ALEN); -@@ -318,7 +318,6 @@ static void __ieee80211_sta_join_ibss(st - rcu_assign_pointer(ifibss->presp, presp); - mgmt = (void *)presp->head; - -- sdata->radar_required = radar_required; - sdata->vif.bss_conf.enable_beacon = true; - sdata->vif.bss_conf.beacon_int = beacon_int; - sdata->vif.bss_conf.basic_rates = basic_rates; -@@ -386,7 +385,7 @@ static void __ieee80211_sta_join_ibss(st - presp->head_len, 0, GFP_KERNEL); - cfg80211_put_bss(local->hw.wiphy, bss); - netif_carrier_on(sdata->dev); -- cfg80211_ibss_joined(sdata->dev, ifibss->bssid, GFP_KERNEL); -+ cfg80211_ibss_joined(sdata->dev, ifibss->bssid, chan, GFP_KERNEL); - } - - static void ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, -@@ -802,6 +801,8 @@ ieee80211_ibss_process_chanswitch(struct - int err; - u32 sta_flags; - -+ sdata_assert_lock(sdata); -+ - sta_flags = IEEE80211_STA_DISABLE_VHT; - switch (ifibss->chandef.width) { - case NL80211_CHAN_WIDTH_5: -@@ -1471,6 +1472,11 @@ static void ieee80211_rx_mgmt_probe_req( - memcpy(((struct ieee80211_mgmt *) skb->data)->da, mgmt->sa, ETH_ALEN); - ibss_dbg(sdata, "Sending ProbeResp to %pM\n", mgmt->sa); - IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; -+ -+ /* avoid excessive retries for probe request to wildcard SSIDs */ -+ if (pos[1] == 0) -+ IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_NO_ACK; -+ - ieee80211_tx_skb(sdata, skb); - } - ---- a/net/mac80211/mesh.c -+++ b/net/mac80211/mesh.c -@@ -872,6 +872,8 @@ ieee80211_mesh_process_chnswitch(struct - if (!ifmsh->mesh_id) - return false; - -+ sdata_assert_lock(sdata); -+ - sta_flags = IEEE80211_STA_DISABLE_VHT; - switch (sdata->vif.bss_conf.chandef.width) { - case NL80211_CHAN_WIDTH_20_NOHT: ---- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c -@@ -4658,6 +4658,7 @@ brcmf_notify_connect_status(struct brcmf - struct brcmf_cfg80211_info *cfg = ifp->drvr->config; - struct net_device *ndev = ifp->ndev; - struct brcmf_cfg80211_profile *profile = &ifp->vif->profile; -+ struct ieee80211_channel *chan; - s32 err = 0; - - if (ifp->vif->mode == WL_MODE_AP) { -@@ -4665,9 +4666,10 @@ brcmf_notify_connect_status(struct brcmf - } else if (brcmf_is_linkup(e)) { - brcmf_dbg(CONN, "Linkup\n"); - if (brcmf_is_ibssmode(ifp->vif)) { -+ chan = ieee80211_get_channel(cfg->wiphy, cfg->channel); - memcpy(profile->bssid, e->addr, ETH_ALEN); - wl_inform_ibss(cfg, ndev, e->addr); -- cfg80211_ibss_joined(ndev, e->addr, GFP_KERNEL); -+ cfg80211_ibss_joined(ndev, e->addr, chan, GFP_KERNEL); - clear_bit(BRCMF_VIF_STATUS_CONNECTING, - &ifp->vif->sme_state); - set_bit(BRCMF_VIF_STATUS_CONNECTED, ---- a/drivers/net/wireless/libertas/cfg.c -+++ b/drivers/net/wireless/libertas/cfg.c -@@ -1766,7 +1766,8 @@ static void lbs_join_post(struct lbs_pri - memcpy(priv->wdev->ssid, params->ssid, params->ssid_len); - priv->wdev->ssid_len = params->ssid_len; - -- cfg80211_ibss_joined(priv->dev, bssid, GFP_KERNEL); -+ cfg80211_ibss_joined(priv->dev, bssid, params->chandef.chan, -+ GFP_KERNEL); - - /* TODO: consider doing this at MACREG_INT_CODE_LINK_SENSED time */ - priv->connect_status = LBS_CONNECTED; ---- a/drivers/net/wireless/mwifiex/cfg80211.c -+++ b/drivers/net/wireless/mwifiex/cfg80211.c -@@ -1881,7 +1881,8 @@ mwifiex_cfg80211_join_ibss(struct wiphy - params->privacy); - done: - if (!ret) { -- cfg80211_ibss_joined(priv->netdev, priv->cfg_bssid, GFP_KERNEL); -+ cfg80211_ibss_joined(priv->netdev, priv->cfg_bssid, -+ params->chandef.chan, GFP_KERNEL); - dev_dbg(priv->adapter->dev, - "info: joined/created adhoc network with bssid" - " %pM successfully\n", priv->cfg_bssid); ---- a/drivers/net/wireless/rndis_wlan.c -+++ b/drivers/net/wireless/rndis_wlan.c -@@ -2835,7 +2835,9 @@ static void rndis_wlan_do_link_up_work(s - bssid, req_ie, req_ie_len, - resp_ie, resp_ie_len, GFP_KERNEL); - } else if (priv->infra_mode == NDIS_80211_INFRA_ADHOC) -- cfg80211_ibss_joined(usbdev->net, bssid, GFP_KERNEL); -+ cfg80211_ibss_joined(usbdev->net, bssid, -+ get_current_channel(usbdev, NULL), -+ GFP_KERNEL); - - kfree(info); - ---- a/net/wireless/ibss.c -+++ b/net/wireless/ibss.c -@@ -14,7 +14,8 @@ - #include "rdev-ops.h" - - --void __cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid) -+void __cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, -+ struct ieee80211_channel *channel) - { - struct wireless_dev *wdev = dev->ieee80211_ptr; - struct cfg80211_bss *bss; -@@ -28,8 +29,7 @@ void __cfg80211_ibss_joined(struct net_d - if (!wdev->ssid_len) - return; - -- bss = cfg80211_get_bss(wdev->wiphy, NULL, bssid, -- wdev->ssid, wdev->ssid_len, -+ bss = cfg80211_get_bss(wdev->wiphy, channel, bssid, NULL, 0, - WLAN_CAPABILITY_IBSS, WLAN_CAPABILITY_IBSS); - - if (WARN_ON(!bss)) -@@ -54,21 +54,26 @@ void __cfg80211_ibss_joined(struct net_d - #endif - } - --void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, gfp_t gfp) -+void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, -+ struct ieee80211_channel *channel, gfp_t gfp) - { - struct wireless_dev *wdev = dev->ieee80211_ptr; - struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy); - struct cfg80211_event *ev; - unsigned long flags; - -- trace_cfg80211_ibss_joined(dev, bssid); -+ trace_cfg80211_ibss_joined(dev, bssid, channel); -+ -+ if (WARN_ON(!channel)) -+ return; - - ev = kzalloc(sizeof(*ev), gfp); - if (!ev) - return; - - ev->type = EVENT_IBSS_JOINED; -- memcpy(ev->cr.bssid, bssid, ETH_ALEN); -+ memcpy(ev->ij.bssid, bssid, ETH_ALEN); -+ ev->ij.channel = channel; - - spin_lock_irqsave(&wdev->event_lock, flags); - list_add_tail(&ev->list, &wdev->event_list); -@@ -117,6 +122,7 @@ int __cfg80211_join_ibss(struct cfg80211 - - wdev->ibss_fixed = params->channel_fixed; - wdev->ibss_dfs_possible = params->userspace_handles_dfs; -+ wdev->chandef = params->chandef; - #ifdef CPTCFG_CFG80211_WEXT - wdev->wext.ibss.chandef = params->chandef; - #endif -@@ -200,6 +206,7 @@ static void __cfg80211_clear_ibss(struct - - wdev->current_bss = NULL; - wdev->ssid_len = 0; -+ memset(&wdev->chandef, 0, sizeof(wdev->chandef)); - #ifdef CPTCFG_CFG80211_WEXT - if (!nowext) - wdev->wext.ibss.ssid_len = 0; ---- a/net/wireless/trace.h -+++ b/net/wireless/trace.h -@@ -2278,11 +2278,6 @@ DECLARE_EVENT_CLASS(cfg80211_rx_evt, - TP_printk(NETDEV_PR_FMT ", " MAC_PR_FMT, NETDEV_PR_ARG, MAC_PR_ARG(addr)) - ); - --DEFINE_EVENT(cfg80211_rx_evt, cfg80211_ibss_joined, -- TP_PROTO(struct net_device *netdev, const u8 *addr), -- TP_ARGS(netdev, addr) --); -- - DEFINE_EVENT(cfg80211_rx_evt, cfg80211_rx_spurious_frame, - TP_PROTO(struct net_device *netdev, const u8 *addr), - TP_ARGS(netdev, addr) -@@ -2293,6 +2288,24 @@ DEFINE_EVENT(cfg80211_rx_evt, cfg80211_r - TP_ARGS(netdev, addr) - ); - -+TRACE_EVENT(cfg80211_ibss_joined, -+ TP_PROTO(struct net_device *netdev, const u8 *bssid, -+ struct ieee80211_channel *channel), -+ TP_ARGS(netdev, bssid, channel), -+ TP_STRUCT__entry( -+ NETDEV_ENTRY -+ MAC_ENTRY(bssid) -+ CHAN_ENTRY -+ ), -+ TP_fast_assign( -+ NETDEV_ASSIGN; -+ MAC_ASSIGN(bssid, bssid); -+ CHAN_ASSIGN(channel); -+ ), -+ TP_printk(NETDEV_PR_FMT ", bssid: " MAC_PR_FMT ", " CHAN_PR_FMT, -+ NETDEV_PR_ARG, MAC_PR_ARG(bssid), CHAN_PR_ARG) -+); -+ - TRACE_EVENT(cfg80211_probe_status, - TP_PROTO(struct net_device *netdev, const u8 *addr, u64 cookie, - bool acked), ---- a/net/wireless/util.c -+++ b/net/wireless/util.c -@@ -820,7 +820,8 @@ void cfg80211_process_wdev_events(struct - ev->dc.reason, true); - break; - case EVENT_IBSS_JOINED: -- __cfg80211_ibss_joined(wdev->netdev, ev->ij.bssid); -+ __cfg80211_ibss_joined(wdev->netdev, ev->ij.bssid, -+ ev->ij.channel); - break; - } - wdev_unlock(wdev); -@@ -1356,7 +1357,7 @@ int cfg80211_can_use_iftype_chan(struct - */ - mutex_lock_nested(&wdev_iter->mtx, 1); - __acquire(wdev_iter->mtx); -- cfg80211_get_chan_state(wdev_iter, &ch, &chmode); -+ cfg80211_get_chan_state(wdev_iter, &ch, &chmode, &radar_detect); - wdev_unlock(wdev_iter); - - switch (chmode) { ---- a/net/wireless/chan.c -+++ b/net/wireless/chan.c -@@ -642,7 +642,8 @@ int cfg80211_set_monitor_channel(struct - void - cfg80211_get_chan_state(struct wireless_dev *wdev, - struct ieee80211_channel **chan, -- enum cfg80211_chan_mode *chanmode) -+ enum cfg80211_chan_mode *chanmode, -+ u8 *radar_detect) - { - *chan = NULL; - *chanmode = CHAN_MODE_UNDEFINED; -@@ -660,6 +661,11 @@ cfg80211_get_chan_state(struct wireless_ - !wdev->ibss_dfs_possible) - ? CHAN_MODE_SHARED - : CHAN_MODE_EXCLUSIVE; -+ -+ /* consider worst-case - IBSS can try to return to the -+ * original user-specified channel as creator */ -+ if (wdev->ibss_dfs_possible) -+ *radar_detect |= BIT(wdev->chandef.width); - return; - } - break; -@@ -674,17 +680,26 @@ cfg80211_get_chan_state(struct wireless_ - case NL80211_IFTYPE_AP: - case NL80211_IFTYPE_P2P_GO: - if (wdev->cac_started) { -- *chan = wdev->channel; -+ *chan = wdev->chandef.chan; - *chanmode = CHAN_MODE_SHARED; -+ *radar_detect |= BIT(wdev->chandef.width); - } else if (wdev->beacon_interval) { -- *chan = wdev->channel; -+ *chan = wdev->chandef.chan; - *chanmode = CHAN_MODE_SHARED; -+ -+ if (cfg80211_chandef_dfs_required(wdev->wiphy, -+ &wdev->chandef)) -+ *radar_detect |= BIT(wdev->chandef.width); - } - return; - case NL80211_IFTYPE_MESH_POINT: - if (wdev->mesh_id_len) { -- *chan = wdev->channel; -+ *chan = wdev->chandef.chan; - *chanmode = CHAN_MODE_SHARED; -+ -+ if (cfg80211_chandef_dfs_required(wdev->wiphy, -+ &wdev->chandef)) -+ *radar_detect |= BIT(wdev->chandef.width); - } - return; - case NL80211_IFTYPE_MONITOR: ---- a/net/wireless/mesh.c -+++ b/net/wireless/mesh.c -@@ -195,7 +195,7 @@ int __cfg80211_join_mesh(struct cfg80211 - if (!err) { - memcpy(wdev->ssid, setup->mesh_id, setup->mesh_id_len); - wdev->mesh_id_len = setup->mesh_id_len; -- wdev->channel = setup->chandef.chan; -+ wdev->chandef = setup->chandef; - } - - return err; -@@ -244,7 +244,7 @@ int cfg80211_set_mesh_channel(struct cfg - err = rdev_libertas_set_mesh_channel(rdev, wdev->netdev, - chandef->chan); - if (!err) -- wdev->channel = chandef->chan; -+ wdev->chandef = *chandef; - - return err; - } -@@ -276,7 +276,7 @@ static int __cfg80211_leave_mesh(struct - err = rdev_leave_mesh(rdev, dev); - if (!err) { - wdev->mesh_id_len = 0; -- wdev->channel = NULL; -+ memset(&wdev->chandef, 0, sizeof(wdev->chandef)); - rdev_set_qos_map(rdev, dev, NULL); - } - ---- a/net/wireless/mlme.c -+++ b/net/wireless/mlme.c -@@ -772,7 +772,7 @@ void cfg80211_cac_event(struct net_devic - if (WARN_ON(!wdev->cac_started)) - return; - -- if (WARN_ON(!wdev->channel)) -+ if (WARN_ON(!wdev->chandef.chan)) - return; - - switch (event) { ---- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c -+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c -@@ -5065,6 +5065,10 @@ static u16 ar9003_hw_get_max_edge_power( - break; - } - } -+ -+ if (is2GHz && !twiceMaxEdgePower) -+ twiceMaxEdgePower = 60; -+ - return twiceMaxEdgePower; - } - ---- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c -+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c -@@ -23,10 +23,11 @@ - #define MAX_MEASUREMENT MAX_IQCAL_MEASUREMENT - #define MAX_MAG_DELTA 11 - #define MAX_PHS_DELTA 10 -+#define MAXIQCAL 3 - - struct coeff { -- int mag_coeff[AR9300_MAX_CHAINS][MAX_MEASUREMENT]; -- int phs_coeff[AR9300_MAX_CHAINS][MAX_MEASUREMENT]; -+ int mag_coeff[AR9300_MAX_CHAINS][MAX_MEASUREMENT][MAXIQCAL]; -+ int phs_coeff[AR9300_MAX_CHAINS][MAX_MEASUREMENT][MAXIQCAL]; - int iqc_coeff[2]; - }; - -@@ -800,7 +801,7 @@ static bool ar9003_hw_calc_iq_corr(struc - if (q_q_coff > 63) - q_q_coff = 63; - -- iqc_coeff[0] = (q_q_coff * 128) + q_i_coff; -+ iqc_coeff[0] = (q_q_coff * 128) + (0x7f & q_i_coff); - - ath_dbg(common, CALIBRATE, "tx chain %d: iq corr coeff=%x\n", - chain_idx, iqc_coeff[0]); -@@ -831,7 +832,7 @@ static bool ar9003_hw_calc_iq_corr(struc - if (q_q_coff > 63) - q_q_coff = 63; - -- iqc_coeff[1] = (q_q_coff * 128) + q_i_coff; -+ iqc_coeff[1] = (q_q_coff * 128) + (0x7f & q_i_coff); - - ath_dbg(common, CALIBRATE, "rx chain %d: iq corr coeff=%x\n", - chain_idx, iqc_coeff[1]); -@@ -839,7 +840,8 @@ static bool ar9003_hw_calc_iq_corr(struc - return true; - } - --static void ar9003_hw_detect_outlier(int *mp_coeff, int nmeasurement, -+static void ar9003_hw_detect_outlier(int mp_coeff[][MAXIQCAL], -+ int nmeasurement, - int max_delta) - { - int mp_max = -64, max_idx = 0; -@@ -848,20 +850,20 @@ static void ar9003_hw_detect_outlier(int - - /* find min/max mismatch across all calibrated gains */ - for (i = 0; i < nmeasurement; i++) { -- if (mp_coeff[i] > mp_max) { -- mp_max = mp_coeff[i]; -+ if (mp_coeff[i][0] > mp_max) { -+ mp_max = mp_coeff[i][0]; - max_idx = i; -- } else if (mp_coeff[i] < mp_min) { -- mp_min = mp_coeff[i]; -+ } else if (mp_coeff[i][0] < mp_min) { -+ mp_min = mp_coeff[i][0]; - min_idx = i; - } - } - - /* find average (exclude max abs value) */ - for (i = 0; i < nmeasurement; i++) { -- if ((abs(mp_coeff[i]) < abs(mp_max)) || -- (abs(mp_coeff[i]) < abs(mp_min))) { -- mp_avg += mp_coeff[i]; -+ if ((abs(mp_coeff[i][0]) < abs(mp_max)) || -+ (abs(mp_coeff[i][0]) < abs(mp_min))) { -+ mp_avg += mp_coeff[i][0]; - mp_count++; - } - } -@@ -873,7 +875,7 @@ static void ar9003_hw_detect_outlier(int - if (mp_count) - mp_avg /= mp_count; - else -- mp_avg = mp_coeff[nmeasurement - 1]; -+ mp_avg = mp_coeff[nmeasurement - 1][0]; - - /* detect outlier */ - if (abs(mp_max - mp_min) > max_delta) { -@@ -882,15 +884,16 @@ static void ar9003_hw_detect_outlier(int - else - outlier_idx = min_idx; - -- mp_coeff[outlier_idx] = mp_avg; -+ mp_coeff[outlier_idx][0] = mp_avg; - } - } - --static void ar9003_hw_tx_iqcal_load_avg_2_passes(struct ath_hw *ah, -- struct coeff *coeff, -- bool is_reusable) -+static void ar9003_hw_tx_iq_cal_outlier_detection(struct ath_hw *ah, -+ struct coeff *coeff, -+ bool is_reusable) - { - int i, im, nmeasurement; -+ int magnitude, phase; - u32 tx_corr_coeff[MAX_MEASUREMENT][AR9300_MAX_CHAINS]; - struct ath9k_hw_cal_data *caldata = ah->caldata; - -@@ -920,21 +923,30 @@ static void ar9003_hw_tx_iqcal_load_avg_ - if (nmeasurement > MAX_MEASUREMENT) - nmeasurement = MAX_MEASUREMENT; - -- /* detect outlier only if nmeasurement > 1 */ -- if (nmeasurement > 1) { -- /* Detect magnitude outlier */ -- ar9003_hw_detect_outlier(coeff->mag_coeff[i], -- nmeasurement, MAX_MAG_DELTA); -- -- /* Detect phase outlier */ -- ar9003_hw_detect_outlier(coeff->phs_coeff[i], -- nmeasurement, MAX_PHS_DELTA); -+ /* -+ * Skip normal outlier detection for AR9550. -+ */ -+ if (!AR_SREV_9550(ah)) { -+ /* detect outlier only if nmeasurement > 1 */ -+ if (nmeasurement > 1) { -+ /* Detect magnitude outlier */ -+ ar9003_hw_detect_outlier(coeff->mag_coeff[i], -+ nmeasurement, -+ MAX_MAG_DELTA); -+ -+ /* Detect phase outlier */ -+ ar9003_hw_detect_outlier(coeff->phs_coeff[i], -+ nmeasurement, -+ MAX_PHS_DELTA); -+ } - } - - for (im = 0; im < nmeasurement; im++) { -+ magnitude = coeff->mag_coeff[i][im][0]; -+ phase = coeff->phs_coeff[i][im][0]; - -- coeff->iqc_coeff[0] = (coeff->mag_coeff[i][im] & 0x7f) | -- ((coeff->phs_coeff[i][im] & 0x7f) << 7); -+ coeff->iqc_coeff[0] = -+ (phase & 0x7f) | ((magnitude & 0x7f) << 7); - - if ((im % 2) == 0) - REG_RMW_FIELD(ah, tx_corr_coeff[im][i], -@@ -991,7 +1003,63 @@ static bool ar9003_hw_tx_iq_cal_run(stru - return true; - } - --static void ar9003_hw_tx_iq_cal_post_proc(struct ath_hw *ah, bool is_reusable) -+static void __ar955x_tx_iq_cal_sort(struct ath_hw *ah, -+ struct coeff *coeff, -+ int i, int nmeasurement) -+{ -+ struct ath_common *common = ath9k_hw_common(ah); -+ int im, ix, iy, temp; -+ -+ for (im = 0; im < nmeasurement; im++) { -+ for (ix = 0; ix < MAXIQCAL - 1; ix++) { -+ for (iy = ix + 1; iy <= MAXIQCAL - 1; iy++) { -+ if (coeff->mag_coeff[i][im][iy] < -+ coeff->mag_coeff[i][im][ix]) { -+ temp = coeff->mag_coeff[i][im][ix]; -+ coeff->mag_coeff[i][im][ix] = -+ coeff->mag_coeff[i][im][iy]; -+ coeff->mag_coeff[i][im][iy] = temp; -+ } -+ if (coeff->phs_coeff[i][im][iy] < -+ coeff->phs_coeff[i][im][ix]) { -+ temp = coeff->phs_coeff[i][im][ix]; -+ coeff->phs_coeff[i][im][ix] = -+ coeff->phs_coeff[i][im][iy]; -+ coeff->phs_coeff[i][im][iy] = temp; -+ } -+ } -+ } -+ coeff->mag_coeff[i][im][0] = coeff->mag_coeff[i][im][MAXIQCAL / 2]; -+ coeff->phs_coeff[i][im][0] = coeff->phs_coeff[i][im][MAXIQCAL / 2]; -+ -+ ath_dbg(common, CALIBRATE, -+ "IQCAL: Median [ch%d][gain%d]: mag = %d phase = %d\n", -+ i, im, -+ coeff->mag_coeff[i][im][0], -+ coeff->phs_coeff[i][im][0]); -+ } -+} -+ -+static bool ar955x_tx_iq_cal_median(struct ath_hw *ah, -+ struct coeff *coeff, -+ int iqcal_idx, -+ int nmeasurement) -+{ -+ int i; -+ -+ if ((iqcal_idx + 1) != MAXIQCAL) -+ return false; -+ -+ for (i = 0; i < AR9300_MAX_CHAINS; i++) { -+ __ar955x_tx_iq_cal_sort(ah, coeff, i, nmeasurement); -+ } -+ -+ return true; -+} -+ -+static void ar9003_hw_tx_iq_cal_post_proc(struct ath_hw *ah, -+ int iqcal_idx, -+ bool is_reusable) - { - struct ath_common *common = ath9k_hw_common(ah); - const u32 txiqcal_status[AR9300_MAX_CHAINS] = { -@@ -1004,10 +1072,11 @@ static void ar9003_hw_tx_iq_cal_post_pro - AR_PHY_CHAN_INFO_TAB_1, - AR_PHY_CHAN_INFO_TAB_2, - }; -- struct coeff coeff; -+ static struct coeff coeff; - s32 iq_res[6]; - int i, im, j; -- int nmeasurement; -+ int nmeasurement = 0; -+ bool outlier_detect = true; - - for (i = 0; i < AR9300_MAX_CHAINS; i++) { - if (!(ah->txchainmask & (1 << i))) -@@ -1065,17 +1134,23 @@ static void ar9003_hw_tx_iq_cal_post_pro - goto tx_iqcal_fail; - } - -- coeff.mag_coeff[i][im] = coeff.iqc_coeff[0] & 0x7f; -- coeff.phs_coeff[i][im] = -+ coeff.phs_coeff[i][im][iqcal_idx] = -+ coeff.iqc_coeff[0] & 0x7f; -+ coeff.mag_coeff[i][im][iqcal_idx] = - (coeff.iqc_coeff[0] >> 7) & 0x7f; - -- if (coeff.mag_coeff[i][im] > 63) -- coeff.mag_coeff[i][im] -= 128; -- if (coeff.phs_coeff[i][im] > 63) -- coeff.phs_coeff[i][im] -= 128; -+ if (coeff.mag_coeff[i][im][iqcal_idx] > 63) -+ coeff.mag_coeff[i][im][iqcal_idx] -= 128; -+ if (coeff.phs_coeff[i][im][iqcal_idx] > 63) -+ coeff.phs_coeff[i][im][iqcal_idx] -= 128; - } - } -- ar9003_hw_tx_iqcal_load_avg_2_passes(ah, &coeff, is_reusable); -+ -+ if (AR_SREV_9550(ah)) -+ outlier_detect = ar955x_tx_iq_cal_median(ah, &coeff, -+ iqcal_idx, nmeasurement); -+ if (outlier_detect) -+ ar9003_hw_tx_iq_cal_outlier_detection(ah, &coeff, is_reusable); - - return; - -@@ -1409,7 +1484,7 @@ skip_tx_iqcal: - } - - if (txiqcal_done) -- ar9003_hw_tx_iq_cal_post_proc(ah, is_reusable); -+ ar9003_hw_tx_iq_cal_post_proc(ah, 0, is_reusable); - else if (caldata && test_bit(TXIQCAL_DONE, &caldata->cal_flags)) - ar9003_hw_tx_iq_cal_reload(ah); - -@@ -1455,14 +1530,38 @@ skip_tx_iqcal: - return true; - } - -+static bool do_ar9003_agc_cal(struct ath_hw *ah) -+{ -+ struct ath_common *common = ath9k_hw_common(ah); -+ bool status; -+ -+ REG_WRITE(ah, AR_PHY_AGC_CONTROL, -+ REG_READ(ah, AR_PHY_AGC_CONTROL) | -+ AR_PHY_AGC_CONTROL_CAL); -+ -+ status = ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL, -+ AR_PHY_AGC_CONTROL_CAL, -+ 0, AH_WAIT_TIMEOUT); -+ if (!status) { -+ ath_dbg(common, CALIBRATE, -+ "offset calibration failed to complete in %d ms," -+ "noisy environment?\n", -+ AH_WAIT_TIMEOUT / 1000); -+ return false; -+ } -+ -+ return true; -+} -+ - static bool ar9003_hw_init_cal_soc(struct ath_hw *ah, - struct ath9k_channel *chan) - { - struct ath_common *common = ath9k_hw_common(ah); - struct ath9k_hw_cal_data *caldata = ah->caldata; - bool txiqcal_done = false; -- bool is_reusable = true, status = true; -+ bool status = true; - bool run_agc_cal = false, sep_iq_cal = false; -+ int i = 0; - - /* Use chip chainmask only for calibration */ - ar9003_hw_set_chain_masks(ah, ah->caps.rx_chainmask, ah->caps.tx_chainmask); -@@ -1485,7 +1584,12 @@ static bool ar9003_hw_init_cal_soc(struc - * AGC calibration. Specifically, AR9550 in SoC chips. - */ - if (ah->enabled_cals & TX_IQ_ON_AGC_CAL) { -- txiqcal_done = true; -+ if (REG_READ_FIELD(ah, AR_PHY_TX_IQCAL_CONTROL_0, -+ AR_PHY_TX_IQCAL_CONTROL_0_ENABLE_TXIQ_CAL)) { -+ txiqcal_done = true; -+ } else { -+ txiqcal_done = false; -+ } - run_agc_cal = true; - } else { - sep_iq_cal = true; -@@ -1512,27 +1616,37 @@ skip_tx_iqcal: - if (AR_SREV_9330_11(ah)) - ar9003_hw_manual_peak_cal(ah, 0, IS_CHAN_2GHZ(chan)); - -- /* Calibrate the AGC */ -- REG_WRITE(ah, AR_PHY_AGC_CONTROL, -- REG_READ(ah, AR_PHY_AGC_CONTROL) | -- AR_PHY_AGC_CONTROL_CAL); -- -- /* Poll for offset calibration complete */ -- status = ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL, -- AR_PHY_AGC_CONTROL_CAL, -- 0, AH_WAIT_TIMEOUT); -- } -+ /* -+ * For non-AR9550 chips, we just trigger AGC calibration -+ * in the HW, poll for completion and then process -+ * the results. -+ * -+ * For AR955x, we run it multiple times and use -+ * median IQ correction. -+ */ -+ if (!AR_SREV_9550(ah)) { -+ status = do_ar9003_agc_cal(ah); -+ if (!status) -+ return false; - -- if (!status) { -- ath_dbg(common, CALIBRATE, -- "offset calibration failed to complete in %d ms; noisy environment?\n", -- AH_WAIT_TIMEOUT / 1000); -- return false; -+ if (txiqcal_done) -+ ar9003_hw_tx_iq_cal_post_proc(ah, 0, false); -+ } else { -+ if (!txiqcal_done) { -+ status = do_ar9003_agc_cal(ah); -+ if (!status) -+ return false; -+ } else { -+ for (i = 0; i < MAXIQCAL; i++) { -+ status = do_ar9003_agc_cal(ah); -+ if (!status) -+ return false; -+ ar9003_hw_tx_iq_cal_post_proc(ah, i, false); -+ } -+ } -+ } - } - -- if (txiqcal_done) -- ar9003_hw_tx_iq_cal_post_proc(ah, is_reusable); -- - /* Revert chainmask to runtime parameters */ - ar9003_hw_set_chain_masks(ah, ah->rxchainmask, ah->txchainmask); - ---- a/drivers/net/wireless/rtl818x/rtl8187/rtl8187.h -+++ b/drivers/net/wireless/rtl818x/rtl8187/rtl8187.h -@@ -15,6 +15,8 @@ - #ifndef RTL8187_H - #define RTL8187_H - -+#include <linux/cache.h> -+ - #include "rtl818x.h" - #include "leds.h" - -@@ -139,7 +141,10 @@ struct rtl8187_priv { - u8 aifsn[4]; - u8 rfkill_mask; - struct { -- __le64 buf; -+ union { -+ __le64 buf; -+ u8 dummy1[L1_CACHE_BYTES]; -+ } ____cacheline_aligned; - struct sk_buff_head queue; - } b_tx_status; /* This queue is used by both -b and non-b devices */ - struct mutex io_mutex; -@@ -147,7 +152,8 @@ struct rtl8187_priv { - u8 bits8; - __le16 bits16; - __le32 bits32; -- } *io_dmabuf; -+ u8 dummy2[L1_CACHE_BYTES]; -+ } *io_dmabuf ____cacheline_aligned; - bool rfkill_off; - u16 seqno; - }; ---- a/net/mac80211/wme.c -+++ b/net/mac80211/wme.c -@@ -154,6 +154,11 @@ u16 ieee80211_select_queue(struct ieee80 - return IEEE80211_AC_BE; - } - -+ if (skb->protocol == sdata->control_port_protocol) { -+ skb->priority = 7; -+ return ieee80211_downgrade_queue(sdata, skb); -+ } -+ - /* use the data classifier to determine what 802.1d tag the - * data frame has */ - rcu_read_lock(); ---- a/drivers/net/wireless/ath/ath9k/xmit.c -+++ b/drivers/net/wireless/ath/ath9k/xmit.c -@@ -1444,14 +1444,16 @@ void ath_tx_aggr_sleep(struct ieee80211_ - for (tidno = 0, tid = &an->tid[tidno]; - tidno < IEEE80211_NUM_TIDS; tidno++, tid++) { - -- if (!tid->sched) -- continue; -- - ac = tid->ac; - txq = ac->txq; - - ath_txq_lock(sc, txq); - -+ if (!tid->sched) { -+ ath_txq_unlock(sc, txq); -+ continue; -+ } -+ - buffered = ath_tid_has_buffered(tid); - - tid->sched = false; -@@ -1696,7 +1698,7 @@ int ath_cabq_update(struct ath_softc *sc - - ath9k_hw_get_txq_props(sc->sc_ah, qnum, &qi); - -- qi.tqi_readyTime = (cur_conf->beacon_interval * -+ qi.tqi_readyTime = (TU_TO_USEC(cur_conf->beacon_interval) * - ATH_CABQ_READY_TIME) / 100; - ath_txq_update(sc, qnum, &qi); - -@@ -2061,7 +2063,7 @@ static struct ath_buf *ath_tx_setup_buff - - ATH_TXBUF_RESET(bf); - -- if (tid) { -+ if (tid && ieee80211_is_data_present(hdr->frame_control)) { - fragno = le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG; - seqno = tid->seq_next; - hdr->seq_ctrl = cpu_to_le16(tid->seq_next << IEEE80211_SEQ_SEQ_SHIFT); -@@ -2184,14 +2186,15 @@ int ath_tx_start(struct ieee80211_hw *hw - txq->stopped = true; - } - -+ if (txctl->an && ieee80211_is_data_present(hdr->frame_control)) -+ tid = ath_get_skb_tid(sc, txctl->an, skb); -+ - if (info->flags & IEEE80211_TX_CTL_PS_RESPONSE) { - ath_txq_unlock(sc, txq); - txq = sc->tx.uapsdq; - ath_txq_lock(sc, txq); - } else if (txctl->an && - ieee80211_is_data_present(hdr->frame_control)) { -- tid = ath_get_skb_tid(sc, txctl->an, skb); -- - WARN_ON(tid->ac->txq != txctl->txq); - - if (info->flags & IEEE80211_TX_CTL_CLEAR_PS_FILT) ---- a/drivers/net/wireless/ath/ath9k/init.c -+++ b/drivers/net/wireless/ath/ath9k/init.c -@@ -943,6 +943,7 @@ static void ath9k_set_hw_capab(struct at - hw->wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL; - hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_5_10_MHZ; - hw->wiphy->flags |= WIPHY_FLAG_HAS_CHANNEL_SWITCH; -+ hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD; - - hw->queues = 4; - hw->max_rates = 4; ---- a/net/mac80211/ieee80211_i.h -+++ b/net/mac80211/ieee80211_i.h -@@ -1700,14 +1700,8 @@ void ieee80211_stop_queue_by_reason(stru - void ieee80211_propagate_queue_wake(struct ieee80211_local *local, int queue); - void ieee80211_add_pending_skb(struct ieee80211_local *local, - struct sk_buff *skb); --void ieee80211_add_pending_skbs_fn(struct ieee80211_local *local, -- struct sk_buff_head *skbs, -- void (*fn)(void *data), void *data); --static inline void ieee80211_add_pending_skbs(struct ieee80211_local *local, -- struct sk_buff_head *skbs) --{ -- ieee80211_add_pending_skbs_fn(local, skbs, NULL, NULL); --} -+void ieee80211_add_pending_skbs(struct ieee80211_local *local, -+ struct sk_buff_head *skbs); - void ieee80211_flush_queues(struct ieee80211_local *local, - struct ieee80211_sub_if_data *sdata); - ---- a/net/mac80211/sta_info.c -+++ b/net/mac80211/sta_info.c -@@ -91,7 +91,7 @@ static int sta_info_hash_del(struct ieee - return -ENOENT; - } - --static void cleanup_single_sta(struct sta_info *sta) -+static void __cleanup_single_sta(struct sta_info *sta) - { - int ac, i; - struct tid_ampdu_tx *tid_tx; -@@ -99,7 +99,8 @@ static void cleanup_single_sta(struct st - struct ieee80211_local *local = sdata->local; - struct ps_data *ps; - -- if (test_sta_flag(sta, WLAN_STA_PS_STA)) { -+ if (test_sta_flag(sta, WLAN_STA_PS_STA) || -+ test_sta_flag(sta, WLAN_STA_PS_DRIVER)) { - if (sta->sdata->vif.type == NL80211_IFTYPE_AP || - sta->sdata->vif.type == NL80211_IFTYPE_AP_VLAN) - ps = &sdata->bss->ps; -@@ -109,6 +110,7 @@ static void cleanup_single_sta(struct st - return; - - clear_sta_flag(sta, WLAN_STA_PS_STA); -+ clear_sta_flag(sta, WLAN_STA_PS_DRIVER); - - atomic_dec(&ps->num_sta_ps); - sta_info_recalc_tim(sta); -@@ -139,7 +141,14 @@ static void cleanup_single_sta(struct st - ieee80211_purge_tx_queue(&local->hw, &tid_tx->pending); - kfree(tid_tx); - } -+} - -+static void cleanup_single_sta(struct sta_info *sta) -+{ -+ struct ieee80211_sub_if_data *sdata = sta->sdata; -+ struct ieee80211_local *local = sdata->local; -+ -+ __cleanup_single_sta(sta); - sta_info_free(local, sta); - } - -@@ -330,6 +339,7 @@ struct sta_info *sta_info_alloc(struct i - rcu_read_unlock(); - - spin_lock_init(&sta->lock); -+ spin_lock_init(&sta->ps_lock); - INIT_WORK(&sta->drv_unblock_wk, sta_unblock); - INIT_WORK(&sta->ampdu_mlme.work, ieee80211_ba_session_work); - mutex_init(&sta->ampdu_mlme.mtx); -@@ -487,21 +497,26 @@ static int sta_info_insert_finish(struct - goto out_err; - } - -- /* notify driver */ -- err = sta_info_insert_drv_state(local, sdata, sta); -- if (err) -- goto out_err; -- - local->num_sta++; - local->sta_generation++; - smp_mb(); - -+ /* simplify things and don't accept BA sessions yet */ -+ set_sta_flag(sta, WLAN_STA_BLOCK_BA); -+ - /* make the station visible */ - sta_info_hash_add(local, sta); - - list_add_rcu(&sta->list, &local->sta_list); - -+ /* notify driver */ -+ err = sta_info_insert_drv_state(local, sdata, sta); -+ if (err) -+ goto out_remove; -+ - set_sta_flag(sta, WLAN_STA_INSERTED); -+ /* accept BA sessions now */ -+ clear_sta_flag(sta, WLAN_STA_BLOCK_BA); - - ieee80211_recalc_min_chandef(sdata); - ieee80211_sta_debugfs_add(sta); -@@ -522,6 +537,12 @@ static int sta_info_insert_finish(struct - mesh_accept_plinks_update(sdata); - - return 0; -+ out_remove: -+ sta_info_hash_del(local, sta); -+ list_del_rcu(&sta->list); -+ local->num_sta--; -+ synchronize_net(); -+ __cleanup_single_sta(sta); - out_err: - mutex_unlock(&local->sta_mtx); - rcu_read_lock(); -@@ -1071,10 +1092,14 @@ struct ieee80211_sta *ieee80211_find_sta - } - EXPORT_SYMBOL(ieee80211_find_sta); - --static void clear_sta_ps_flags(void *_sta) -+/* powersave support code */ -+void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta) - { -- struct sta_info *sta = _sta; - struct ieee80211_sub_if_data *sdata = sta->sdata; -+ struct ieee80211_local *local = sdata->local; -+ struct sk_buff_head pending; -+ int filtered = 0, buffered = 0, ac; -+ unsigned long flags; - struct ps_data *ps; - - if (sdata->vif.type == NL80211_IFTYPE_AP || -@@ -1085,20 +1110,6 @@ static void clear_sta_ps_flags(void *_st - else - return; - -- clear_sta_flag(sta, WLAN_STA_PS_DRIVER); -- if (test_and_clear_sta_flag(sta, WLAN_STA_PS_STA)) -- atomic_dec(&ps->num_sta_ps); --} -- --/* powersave support code */ --void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta) --{ -- struct ieee80211_sub_if_data *sdata = sta->sdata; -- struct ieee80211_local *local = sdata->local; -- struct sk_buff_head pending; -- int filtered = 0, buffered = 0, ac; -- unsigned long flags; -- - clear_sta_flag(sta, WLAN_STA_SP); - - BUILD_BUG_ON(BITS_TO_LONGS(IEEE80211_NUM_TIDS) > 1); -@@ -1109,6 +1120,8 @@ void ieee80211_sta_ps_deliver_wakeup(str - - skb_queue_head_init(&pending); - -+ /* sync with ieee80211_tx_h_unicast_ps_buf */ -+ spin_lock(&sta->ps_lock); - /* Send all buffered frames to the station */ - for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { - int count = skb_queue_len(&pending), tmp; -@@ -1127,7 +1140,12 @@ void ieee80211_sta_ps_deliver_wakeup(str - buffered += tmp - count; - } - -- ieee80211_add_pending_skbs_fn(local, &pending, clear_sta_ps_flags, sta); -+ ieee80211_add_pending_skbs(local, &pending); -+ clear_sta_flag(sta, WLAN_STA_PS_DRIVER); -+ clear_sta_flag(sta, WLAN_STA_PS_STA); -+ spin_unlock(&sta->ps_lock); -+ -+ atomic_dec(&ps->num_sta_ps); - - /* This station just woke up and isn't aware of our SMPS state */ - if (!ieee80211_smps_is_restrictive(sta->known_smps_mode, ---- a/net/mac80211/sta_info.h -+++ b/net/mac80211/sta_info.h -@@ -267,6 +267,7 @@ struct ieee80211_tx_latency_stat { - * @drv_unblock_wk: used for driver PS unblocking - * @listen_interval: listen interval of this station, when we're acting as AP - * @_flags: STA flags, see &enum ieee80211_sta_info_flags, do not use directly -+ * @ps_lock: used for powersave (when mac80211 is the AP) related locking - * @ps_tx_buf: buffers (per AC) of frames to transmit to this station - * when it leaves power saving state or polls - * @tx_filtered: buffers (per AC) of frames we already tried to -@@ -356,10 +357,8 @@ struct sta_info { - /* use the accessors defined below */ - unsigned long _flags; - -- /* -- * STA powersave frame queues, no more than the internal -- * locking required. -- */ -+ /* STA powersave lock and frame queues */ -+ spinlock_t ps_lock; - struct sk_buff_head ps_tx_buf[IEEE80211_NUM_ACS]; - struct sk_buff_head tx_filtered[IEEE80211_NUM_ACS]; - unsigned long driver_buffered_tids; ---- a/net/mac80211/util.c -+++ b/net/mac80211/util.c -@@ -435,9 +435,8 @@ void ieee80211_add_pending_skb(struct ie - spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); - } - --void ieee80211_add_pending_skbs_fn(struct ieee80211_local *local, -- struct sk_buff_head *skbs, -- void (*fn)(void *data), void *data) -+void ieee80211_add_pending_skbs(struct ieee80211_local *local, -+ struct sk_buff_head *skbs) - { - struct ieee80211_hw *hw = &local->hw; - struct sk_buff *skb; -@@ -461,9 +460,6 @@ void ieee80211_add_pending_skbs_fn(struc - __skb_queue_tail(&local->pending[queue], skb); - } - -- if (fn) -- fn(data); -- - for (i = 0; i < hw->queues; i++) - __ieee80211_wake_queue(hw, i, - IEEE80211_QUEUE_STOP_REASON_SKB_ADD); ---- a/net/wireless/reg.c -+++ b/net/wireless/reg.c -@@ -1700,7 +1700,7 @@ static void reg_process_hint(struct regu - return; - case NL80211_REGDOM_SET_BY_USER: - treatment = reg_process_hint_user(reg_request); -- if (treatment == REG_REQ_OK || -+ if (treatment == REG_REQ_IGNORE || - treatment == REG_REQ_ALREADY_SET) - return; - schedule_delayed_work(®_timeout, msecs_to_jiffies(3142)); ---- a/drivers/net/wireless/ath/ath9k/debug.c -+++ b/drivers/net/wireless/ath/ath9k/debug.c -@@ -138,43 +138,41 @@ static ssize_t read_file_ani(struct file - unsigned int len = 0, size = 1024; - ssize_t retval = 0; - char *buf; -+ int i; -+ struct { -+ const char *name; -+ unsigned int val; -+ } ani_info[] = { -+ { "ANI RESET", ah->stats.ast_ani_reset }, -+ { "OFDM LEVEL", ah->ani.ofdmNoiseImmunityLevel }, -+ { "CCK LEVEL", ah->ani.cckNoiseImmunityLevel }, -+ { "SPUR UP", ah->stats.ast_ani_spurup }, -+ { "SPUR DOWN", ah->stats.ast_ani_spurup }, -+ { "OFDM WS-DET ON", ah->stats.ast_ani_ofdmon }, -+ { "OFDM WS-DET OFF", ah->stats.ast_ani_ofdmoff }, -+ { "MRC-CCK ON", ah->stats.ast_ani_ccklow }, -+ { "MRC-CCK OFF", ah->stats.ast_ani_cckhigh }, -+ { "FIR-STEP UP", ah->stats.ast_ani_stepup }, -+ { "FIR-STEP DOWN", ah->stats.ast_ani_stepdown }, -+ { "INV LISTENTIME", ah->stats.ast_ani_lneg_or_lzero }, -+ { "OFDM ERRORS", ah->stats.ast_ani_ofdmerrs }, -+ { "CCK ERRORS", ah->stats.ast_ani_cckerrs }, -+ }; - - buf = kzalloc(size, GFP_KERNEL); - if (buf == NULL) - return -ENOMEM; - -- if (common->disable_ani) { -- len += scnprintf(buf + len, size - len, "%s: %s\n", -- "ANI", "DISABLED"); -+ len += scnprintf(buf + len, size - len, "%15s: %s\n", "ANI", -+ common->disable_ani ? "DISABLED" : "ENABLED"); -+ -+ if (common->disable_ani) - goto exit; -- } - -- len += scnprintf(buf + len, size - len, "%15s: %s\n", -- "ANI", "ENABLED"); -- len += scnprintf(buf + len, size - len, "%15s: %u\n", -- "ANI RESET", ah->stats.ast_ani_reset); -- len += scnprintf(buf + len, size - len, "%15s: %u\n", -- "SPUR UP", ah->stats.ast_ani_spurup); -- len += scnprintf(buf + len, size - len, "%15s: %u\n", -- "SPUR DOWN", ah->stats.ast_ani_spurup); -- len += scnprintf(buf + len, size - len, "%15s: %u\n", -- "OFDM WS-DET ON", ah->stats.ast_ani_ofdmon); -- len += scnprintf(buf + len, size - len, "%15s: %u\n", -- "OFDM WS-DET OFF", ah->stats.ast_ani_ofdmoff); -- len += scnprintf(buf + len, size - len, "%15s: %u\n", -- "MRC-CCK ON", ah->stats.ast_ani_ccklow); -- len += scnprintf(buf + len, size - len, "%15s: %u\n", -- "MRC-CCK OFF", ah->stats.ast_ani_cckhigh); -- len += scnprintf(buf + len, size - len, "%15s: %u\n", -- "FIR-STEP UP", ah->stats.ast_ani_stepup); -- len += scnprintf(buf + len, size - len, "%15s: %u\n", -- "FIR-STEP DOWN", ah->stats.ast_ani_stepdown); -- len += scnprintf(buf + len, size - len, "%15s: %u\n", -- "INV LISTENTIME", ah->stats.ast_ani_lneg_or_lzero); -- len += scnprintf(buf + len, size - len, "%15s: %u\n", -- "OFDM ERRORS", ah->stats.ast_ani_ofdmerrs); -- len += scnprintf(buf + len, size - len, "%15s: %u\n", -- "CCK ERRORS", ah->stats.ast_ani_cckerrs); -+ for (i = 0; i < ARRAY_SIZE(ani_info); i++) -+ len += scnprintf(buf + len, size - len, "%15s: %u\n", -+ ani_info[i].name, ani_info[i].val); -+ - exit: - if (len > size) - len = size; -@@ -866,6 +864,12 @@ static ssize_t read_file_reset(struct fi - "%17s: %2d\n", "PLL RX Hang", - sc->debug.stats.reset[RESET_TYPE_PLL_HANG]); - len += scnprintf(buf + len, sizeof(buf) - len, -+ "%17s: %2d\n", "MAC Hang", -+ sc->debug.stats.reset[RESET_TYPE_MAC_HANG]); -+ len += scnprintf(buf + len, sizeof(buf) - len, -+ "%17s: %2d\n", "Stuck Beacon", -+ sc->debug.stats.reset[RESET_TYPE_BEACON_STUCK]); -+ len += scnprintf(buf + len, sizeof(buf) - len, - "%17s: %2d\n", "MCI Reset", - sc->debug.stats.reset[RESET_TYPE_MCI]); - ---- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c -+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c -@@ -868,10 +868,6 @@ static void ar9003_hw_set_rfmode(struct - - if (IS_CHAN_A_FAST_CLOCK(ah, chan)) - rfMode |= (AR_PHY_MODE_DYNAMIC | AR_PHY_MODE_DYN_CCK_DISABLE); -- if (IS_CHAN_QUARTER_RATE(chan)) -- rfMode |= AR_PHY_MODE_QUARTER; -- if (IS_CHAN_HALF_RATE(chan)) -- rfMode |= AR_PHY_MODE_HALF; - - if (rfMode & (AR_PHY_MODE_QUARTER | AR_PHY_MODE_HALF)) - REG_RMW_FIELD(ah, AR_PHY_FRAME_CTL, ---- a/drivers/net/wireless/ath/ath5k/mac80211-ops.c -+++ b/drivers/net/wireless/ath/ath5k/mac80211-ops.c -@@ -706,6 +706,7 @@ ath5k_get_survey(struct ieee80211_hw *hw - survey->channel = conf->chandef.chan; - survey->noise = ah->ah_noise_floor; - survey->filled = SURVEY_INFO_NOISE_DBM | -+ SURVEY_INFO_IN_USE | - SURVEY_INFO_CHANNEL_TIME | - SURVEY_INFO_CHANNEL_TIME_BUSY | - SURVEY_INFO_CHANNEL_TIME_RX | ---- a/drivers/net/wireless/ath/ath9k/recv.c -+++ b/drivers/net/wireless/ath/ath9k/recv.c -@@ -732,11 +732,18 @@ static struct ath_rxbuf *ath_get_next_rx - return NULL; - - /* -- * mark descriptor as zero-length and set the 'more' -- * flag to ensure that both buffers get discarded -+ * Re-check previous descriptor, in case it has been filled -+ * in the mean time. - */ -- rs->rs_datalen = 0; -- rs->rs_more = true; -+ ret = ath9k_hw_rxprocdesc(ah, ds, rs); -+ if (ret == -EINPROGRESS) { -+ /* -+ * mark descriptor as zero-length and set the 'more' -+ * flag to ensure that both buffers get discarded -+ */ -+ rs->rs_datalen = 0; -+ rs->rs_more = true; -+ } - } - - list_del(&bf->list); -@@ -985,32 +992,32 @@ static int ath9k_rx_skb_preprocess(struc - struct ath_common *common = ath9k_hw_common(ah); - struct ieee80211_hdr *hdr; - bool discard_current = sc->rx.discard_next; -- int ret = 0; - - /* - * Discard corrupt descriptors which are marked in - * ath_get_next_rx_buf(). - */ -- sc->rx.discard_next = rx_stats->rs_more; - if (discard_current) -- return -EINVAL; -+ goto corrupt; -+ -+ sc->rx.discard_next = false; - - /* - * Discard zero-length packets. - */ - if (!rx_stats->rs_datalen) { - RX_STAT_INC(rx_len_err); -- return -EINVAL; -+ goto corrupt; - } - -- /* -- * rs_status follows rs_datalen so if rs_datalen is too large -- * we can take a hint that hardware corrupted it, so ignore -- * those frames. -- */ -+ /* -+ * rs_status follows rs_datalen so if rs_datalen is too large -+ * we can take a hint that hardware corrupted it, so ignore -+ * those frames. -+ */ - if (rx_stats->rs_datalen > (common->rx_bufsize - ah->caps.rx_status_len)) { - RX_STAT_INC(rx_len_err); -- return -EINVAL; -+ goto corrupt; - } - - /* Only use status info from the last fragment */ -@@ -1024,10 +1031,8 @@ static int ath9k_rx_skb_preprocess(struc - * This is different from the other corrupt descriptor - * condition handled above. - */ -- if (rx_stats->rs_status & ATH9K_RXERR_CORRUPT_DESC) { -- ret = -EINVAL; -- goto exit; -- } -+ if (rx_stats->rs_status & ATH9K_RXERR_CORRUPT_DESC) -+ goto corrupt; - - hdr = (struct ieee80211_hdr *) (skb->data + ah->caps.rx_status_len); - -@@ -1043,18 +1048,15 @@ static int ath9k_rx_skb_preprocess(struc - if (ath_process_fft(sc, hdr, rx_stats, rx_status->mactime)) - RX_STAT_INC(rx_spectral); - -- ret = -EINVAL; -- goto exit; -+ return -EINVAL; - } - - /* - * everything but the rate is checked here, the rate check is done - * separately to avoid doing two lookups for a rate for each frame. - */ -- if (!ath9k_rx_accept(common, hdr, rx_status, rx_stats, decrypt_error)) { -- ret = -EINVAL; -- goto exit; -- } -+ if (!ath9k_rx_accept(common, hdr, rx_status, rx_stats, decrypt_error)) -+ return -EINVAL; - - if (ath_is_mybeacon(common, hdr)) { - RX_STAT_INC(rx_beacons); -@@ -1064,15 +1066,11 @@ static int ath9k_rx_skb_preprocess(struc - /* - * This shouldn't happen, but have a safety check anyway. - */ -- if (WARN_ON(!ah->curchan)) { -- ret = -EINVAL; -- goto exit; -- } -+ if (WARN_ON(!ah->curchan)) -+ return -EINVAL; - -- if (ath9k_process_rate(common, hw, rx_stats, rx_status)) { -- ret =-EINVAL; -- goto exit; -- } -+ if (ath9k_process_rate(common, hw, rx_stats, rx_status)) -+ return -EINVAL; - - ath9k_process_rssi(common, hw, rx_stats, rx_status); - -@@ -1087,9 +1085,11 @@ static int ath9k_rx_skb_preprocess(struc - sc->rx.num_pkts++; - #endif - --exit: -- sc->rx.discard_next = false; -- return ret; -+ return 0; -+ -+corrupt: -+ sc->rx.discard_next = rx_stats->rs_more; -+ return -EINVAL; - } - - static void ath9k_rx_skb_postprocess(struct ath_common *common, ---- a/drivers/net/wireless/ath/ath9k/ani.c -+++ b/drivers/net/wireless/ath/ath9k/ani.c -@@ -176,16 +176,26 @@ static void ath9k_hw_set_ofdm_nil(struct - if (ah->opmode == NL80211_IFTYPE_STATION && - BEACON_RSSI(ah) <= ATH9K_ANI_RSSI_THR_HIGH) - weak_sig = true; -- - /* -- * OFDM Weak signal detection is always enabled for AP mode. -+ * Newer chipsets are better at dealing with high PHY error counts - -+ * keep weak signal detection enabled when no RSSI threshold is -+ * available to determine if it is needed (mode != STA) - */ -- if (ah->opmode != NL80211_IFTYPE_AP && -- aniState->ofdmWeakSigDetect != weak_sig) { -- ath9k_hw_ani_control(ah, -- ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION, -- entry_ofdm->ofdm_weak_signal_on); -- } -+ else if (AR_SREV_9300_20_OR_LATER(ah) && -+ ah->opmode != NL80211_IFTYPE_STATION) -+ weak_sig = true; -+ -+ /* Older chipsets are more sensitive to high PHY error counts */ -+ else if (!AR_SREV_9300_20_OR_LATER(ah) && -+ aniState->ofdmNoiseImmunityLevel >= 8) -+ weak_sig = false; -+ -+ if (aniState->ofdmWeakSigDetect != weak_sig) -+ ath9k_hw_ani_control(ah, ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION, -+ weak_sig); -+ -+ if (!AR_SREV_9300_20_OR_LATER(ah)) -+ return; - - if (aniState->ofdmNoiseImmunityLevel >= ATH9K_ANI_OFDM_DEF_LEVEL) { - ah->config.ofdm_trig_high = ATH9K_ANI_OFDM_TRIG_HIGH; -@@ -308,17 +318,6 @@ void ath9k_ani_reset(struct ath_hw *ah, - BUG_ON(aniState == NULL); - ah->stats.ast_ani_reset++; - -- /* only allow a subset of functions in AP mode */ -- if (ah->opmode == NL80211_IFTYPE_AP) { -- if (IS_CHAN_2GHZ(chan)) { -- ah->ani_function = (ATH9K_ANI_SPUR_IMMUNITY_LEVEL | -- ATH9K_ANI_FIRSTEP_LEVEL); -- if (AR_SREV_9300_20_OR_LATER(ah)) -- ah->ani_function |= ATH9K_ANI_MRC_CCK; -- } else -- ah->ani_function = 0; -- } -- - ofdm_nil = max_t(int, ATH9K_ANI_OFDM_DEF_LEVEL, - aniState->ofdmNoiseImmunityLevel); - cck_nil = max_t(int, ATH9K_ANI_CCK_DEF_LEVEL, -@@ -483,10 +482,17 @@ void ath9k_hw_ani_init(struct ath_hw *ah - - ath_dbg(common, ANI, "Initialize ANI\n"); - -- ah->config.ofdm_trig_high = ATH9K_ANI_OFDM_TRIG_HIGH; -- ah->config.ofdm_trig_low = ATH9K_ANI_OFDM_TRIG_LOW; -- ah->config.cck_trig_high = ATH9K_ANI_CCK_TRIG_HIGH; -- ah->config.cck_trig_low = ATH9K_ANI_CCK_TRIG_LOW; -+ if (AR_SREV_9300_20_OR_LATER(ah)) { -+ ah->config.ofdm_trig_high = ATH9K_ANI_OFDM_TRIG_HIGH; -+ ah->config.ofdm_trig_low = ATH9K_ANI_OFDM_TRIG_LOW; -+ ah->config.cck_trig_high = ATH9K_ANI_CCK_TRIG_HIGH; -+ ah->config.cck_trig_low = ATH9K_ANI_CCK_TRIG_LOW; -+ } else { -+ ah->config.ofdm_trig_high = ATH9K_ANI_OFDM_TRIG_HIGH_OLD; -+ ah->config.ofdm_trig_low = ATH9K_ANI_OFDM_TRIG_LOW_OLD; -+ ah->config.cck_trig_high = ATH9K_ANI_CCK_TRIG_HIGH_OLD; -+ ah->config.cck_trig_low = ATH9K_ANI_CCK_TRIG_LOW_OLD; -+ } - - ani->spurImmunityLevel = ATH9K_ANI_SPUR_IMMUNE_LVL; - ani->firstepLevel = ATH9K_ANI_FIRSTEP_LVL; ---- a/drivers/net/wireless/ath/ath9k/ani.h -+++ b/drivers/net/wireless/ath/ath9k/ani.h -@@ -22,12 +22,16 @@ - /* units are errors per second */ - #define ATH9K_ANI_OFDM_TRIG_HIGH 3500 - #define ATH9K_ANI_OFDM_TRIG_HIGH_BELOW_INI 1000 -+#define ATH9K_ANI_OFDM_TRIG_HIGH_OLD 500 - - #define ATH9K_ANI_OFDM_TRIG_LOW 400 - #define ATH9K_ANI_OFDM_TRIG_LOW_ABOVE_INI 900 -+#define ATH9K_ANI_OFDM_TRIG_LOW_OLD 200 - - #define ATH9K_ANI_CCK_TRIG_HIGH 600 -+#define ATH9K_ANI_CCK_TRIG_HIGH_OLD 200 - #define ATH9K_ANI_CCK_TRIG_LOW 300 -+#define ATH9K_ANI_CCK_TRIG_LOW_OLD 100 - - #define ATH9K_ANI_SPUR_IMMUNE_LVL 3 - #define ATH9K_ANI_FIRSTEP_LVL 2 ---- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c -+++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c -@@ -26,10 +26,6 @@ static const int firstep_table[] = - /* level: 0 1 2 3 4 5 6 7 8 */ - { -4, -2, 0, 2, 4, 6, 8, 10, 12 }; /* lvl 0-8, default 2 */ - --static const int cycpwrThr1_table[] = --/* level: 0 1 2 3 4 5 6 7 8 */ -- { -6, -4, -2, 0, 2, 4, 6, 8 }; /* lvl 0-7, default 3 */ -- - /* - * register values to turn OFDM weak signal detection OFF - */ -@@ -921,7 +917,7 @@ static bool ar5008_hw_ani_control_new(st - struct ath_common *common = ath9k_hw_common(ah); - struct ath9k_channel *chan = ah->curchan; - struct ar5416AniState *aniState = &ah->ani; -- s32 value, value2; -+ s32 value; - - switch (cmd & ah->ani_function) { - case ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION:{ -@@ -1008,42 +1004,11 @@ static bool ar5008_hw_ani_control_new(st - case ATH9K_ANI_FIRSTEP_LEVEL:{ - u32 level = param; - -- if (level >= ARRAY_SIZE(firstep_table)) { -- ath_dbg(common, ANI, -- "ATH9K_ANI_FIRSTEP_LEVEL: level out of range (%u > %zu)\n", -- level, ARRAY_SIZE(firstep_table)); -- return false; -- } -- -- /* -- * make register setting relative to default -- * from INI file & cap value -- */ -- value = firstep_table[level] - -- firstep_table[ATH9K_ANI_FIRSTEP_LVL] + -- aniState->iniDef.firstep; -- if (value < ATH9K_SIG_FIRSTEP_SETTING_MIN) -- value = ATH9K_SIG_FIRSTEP_SETTING_MIN; -- if (value > ATH9K_SIG_FIRSTEP_SETTING_MAX) -- value = ATH9K_SIG_FIRSTEP_SETTING_MAX; -+ value = level * 2; - REG_RMW_FIELD(ah, AR_PHY_FIND_SIG, -- AR_PHY_FIND_SIG_FIRSTEP, -- value); -- /* -- * we need to set first step low register too -- * make register setting relative to default -- * from INI file & cap value -- */ -- value2 = firstep_table[level] - -- firstep_table[ATH9K_ANI_FIRSTEP_LVL] + -- aniState->iniDef.firstepLow; -- if (value2 < ATH9K_SIG_FIRSTEP_SETTING_MIN) -- value2 = ATH9K_SIG_FIRSTEP_SETTING_MIN; -- if (value2 > ATH9K_SIG_FIRSTEP_SETTING_MAX) -- value2 = ATH9K_SIG_FIRSTEP_SETTING_MAX; -- -+ AR_PHY_FIND_SIG_FIRSTEP, value); - REG_RMW_FIELD(ah, AR_PHY_FIND_SIG_LOW, -- AR_PHY_FIND_SIG_FIRSTEP_LOW, value2); -+ AR_PHY_FIND_SIG_FIRSTEP_LOW, value); - - if (level != aniState->firstepLevel) { - ath_dbg(common, ANI, -@@ -1060,7 +1025,7 @@ static bool ar5008_hw_ani_control_new(st - aniState->firstepLevel, - level, - ATH9K_ANI_FIRSTEP_LVL, -- value2, -+ value, - aniState->iniDef.firstepLow); - if (level > aniState->firstepLevel) - ah->stats.ast_ani_stepup++; -@@ -1073,41 +1038,13 @@ static bool ar5008_hw_ani_control_new(st - case ATH9K_ANI_SPUR_IMMUNITY_LEVEL:{ - u32 level = param; - -- if (level >= ARRAY_SIZE(cycpwrThr1_table)) { -- ath_dbg(common, ANI, -- "ATH9K_ANI_SPUR_IMMUNITY_LEVEL: level out of range (%u > %zu)\n", -- level, ARRAY_SIZE(cycpwrThr1_table)); -- return false; -- } -- /* -- * make register setting relative to default -- * from INI file & cap value -- */ -- value = cycpwrThr1_table[level] - -- cycpwrThr1_table[ATH9K_ANI_SPUR_IMMUNE_LVL] + -- aniState->iniDef.cycpwrThr1; -- if (value < ATH9K_SIG_SPUR_IMM_SETTING_MIN) -- value = ATH9K_SIG_SPUR_IMM_SETTING_MIN; -- if (value > ATH9K_SIG_SPUR_IMM_SETTING_MAX) -- value = ATH9K_SIG_SPUR_IMM_SETTING_MAX; -+ value = (level + 1) * 2; - REG_RMW_FIELD(ah, AR_PHY_TIMING5, -- AR_PHY_TIMING5_CYCPWR_THR1, -- value); -+ AR_PHY_TIMING5_CYCPWR_THR1, value); - -- /* -- * set AR_PHY_EXT_CCA for extension channel -- * make register setting relative to default -- * from INI file & cap value -- */ -- value2 = cycpwrThr1_table[level] - -- cycpwrThr1_table[ATH9K_ANI_SPUR_IMMUNE_LVL] + -- aniState->iniDef.cycpwrThr1Ext; -- if (value2 < ATH9K_SIG_SPUR_IMM_SETTING_MIN) -- value2 = ATH9K_SIG_SPUR_IMM_SETTING_MIN; -- if (value2 > ATH9K_SIG_SPUR_IMM_SETTING_MAX) -- value2 = ATH9K_SIG_SPUR_IMM_SETTING_MAX; -- REG_RMW_FIELD(ah, AR_PHY_EXT_CCA, -- AR_PHY_EXT_TIMING5_CYCPWR_THR1, value2); -+ if (IS_CHAN_HT40(ah->curchan)) -+ REG_RMW_FIELD(ah, AR_PHY_EXT_CCA, -+ AR_PHY_EXT_TIMING5_CYCPWR_THR1, value); - - if (level != aniState->spurImmunityLevel) { - ath_dbg(common, ANI, -@@ -1124,7 +1061,7 @@ static bool ar5008_hw_ani_control_new(st - aniState->spurImmunityLevel, - level, - ATH9K_ANI_SPUR_IMMUNE_LVL, -- value2, -+ value, - aniState->iniDef.cycpwrThr1Ext); - if (level > aniState->spurImmunityLevel) - ah->stats.ast_ani_spurup++; |