diff options
Diffstat (limited to 'package/kernel/mac80211/patches/344-0004-brcmfmac-Configure-country-code-using-device-specifi.patch')
| -rw-r--r-- | package/kernel/mac80211/patches/344-0004-brcmfmac-Configure-country-code-using-device-specifi.patch | 214 |
1 files changed, 214 insertions, 0 deletions
diff --git a/package/kernel/mac80211/patches/344-0004-brcmfmac-Configure-country-code-using-device-specifi.patch b/package/kernel/mac80211/patches/344-0004-brcmfmac-Configure-country-code-using-device-specifi.patch new file mode 100644 index 0000000..c52cac8 --- /dev/null +++ b/package/kernel/mac80211/patches/344-0004-brcmfmac-Configure-country-code-using-device-specifi.patch @@ -0,0 +1,214 @@ +From: Hante Meuleman <meuleman@broadcom.com> +Date: Wed, 17 Feb 2016 11:26:53 +0100 +Subject: [PATCH] brcmfmac: Configure country code using device specific + settings + +Country code configuration in a device is a device specific +operation. For this the country code as specified by reg notifier +(iso3166 alpha2) needs to be translated to a device specific +country locale and revision number. This patch adds this +translation and puts a placeholder in the device specific settings +where the translation table can be stored. Additional patches will +be needed to read these tables from for example device platform +data. + +Reviewed-by: Arend Van Spriel <arend@broadcom.com> +Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> +Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> +Signed-off-by: Hante Meuleman <meuleman@broadcom.com> +Signed-off-by: Arend van Spriel <arend@broadcom.com> +Signed-off-by: Kalle Valo <kvalo@codeaurora.org> +--- + +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +@@ -6405,28 +6405,85 @@ int brcmf_cfg80211_wait_vif_event(struct + vif_event_equals(event, action), timeout); + } + ++static s32 brcmf_translate_country_code(struct brcmf_pub *drvr, char alpha2[2], ++ struct brcmf_fil_country_le *ccreq) ++{ ++ struct cc_translate *country_codes; ++ struct cc_entry *cc; ++ s32 found_index; ++ int i; ++ ++ country_codes = drvr->settings->country_codes; ++ if (!country_codes) { ++ brcmf_dbg(TRACE, "No country codes configured for device\n"); ++ return -EINVAL; ++ } ++ ++ if ((alpha2[0] == ccreq->country_abbrev[0]) && ++ (alpha2[1] == ccreq->country_abbrev[1])) { ++ brcmf_dbg(TRACE, "Country code already set\n"); ++ return -EAGAIN; ++ } ++ ++ found_index = -1; ++ for (i = 0; i < country_codes->table_size; i++) { ++ cc = &country_codes->table[i]; ++ if ((cc->iso3166[0] == '\0') && (found_index == -1)) ++ found_index = i; ++ if ((cc->iso3166[0] == alpha2[0]) && ++ (cc->iso3166[1] == alpha2[1])) { ++ found_index = i; ++ break; ++ } ++ } ++ if (found_index == -1) { ++ brcmf_dbg(TRACE, "No country code match found\n"); ++ return -EINVAL; ++ } ++ memset(ccreq, 0, sizeof(*ccreq)); ++ ccreq->rev = cpu_to_le32(country_codes->table[found_index].rev); ++ memcpy(ccreq->ccode, country_codes->table[found_index].cc, ++ BRCMF_COUNTRY_BUF_SZ); ++ ccreq->country_abbrev[0] = alpha2[0]; ++ ccreq->country_abbrev[1] = alpha2[1]; ++ ccreq->country_abbrev[2] = 0; ++ ++ return 0; ++} ++ + static void brcmf_cfg80211_reg_notifier(struct wiphy *wiphy, + struct regulatory_request *req) + { + struct brcmf_cfg80211_info *cfg = wiphy_priv(wiphy); + struct brcmf_if *ifp = netdev_priv(cfg_to_ndev(cfg)); + struct brcmf_fil_country_le ccreq; ++ s32 err; + int i; + +- brcmf_dbg(TRACE, "enter: initiator=%d, alpha=%c%c\n", req->initiator, +- req->alpha2[0], req->alpha2[1]); +- + /* ignore non-ISO3166 country codes */ + for (i = 0; i < sizeof(req->alpha2); i++) + if (req->alpha2[i] < 'A' || req->alpha2[i] > 'Z') { +- brcmf_err("not a ISO3166 code\n"); ++ brcmf_err("not a ISO3166 code (0x%02x 0x%02x)\n", ++ req->alpha2[0], req->alpha2[1]); + return; + } +- memset(&ccreq, 0, sizeof(ccreq)); +- ccreq.rev = cpu_to_le32(-1); +- memcpy(ccreq.ccode, req->alpha2, sizeof(req->alpha2)); +- if (brcmf_fil_iovar_data_set(ifp, "country", &ccreq, sizeof(ccreq))) { +- brcmf_err("firmware rejected country setting\n"); ++ ++ brcmf_dbg(TRACE, "Enter: initiator=%d, alpha=%c%c\n", req->initiator, ++ req->alpha2[0], req->alpha2[1]); ++ ++ err = brcmf_fil_iovar_data_get(ifp, "country", &ccreq, sizeof(ccreq)); ++ if (err) { ++ brcmf_err("Country code iovar returned err = %d\n", err); ++ return; ++ } ++ ++ err = brcmf_translate_country_code(ifp->drvr, req->alpha2, &ccreq); ++ if (err) ++ return; ++ ++ err = brcmf_fil_iovar_data_set(ifp, "country", &ccreq, sizeof(ccreq)); ++ if (err) { ++ brcmf_err("Firmware rejected country setting\n"); + return; + } + brcmf_setup_wiphybands(wiphy); +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c +@@ -230,10 +230,8 @@ void brcmf_mp_attach(void) + int brcmf_mp_device_attach(struct brcmf_pub *drvr) + { + drvr->settings = kzalloc(sizeof(*drvr->settings), GFP_ATOMIC); +- if (!drvr->settings) { +- brcmf_err("Failed to alloca storage space for settings\n"); ++ if (!drvr->settings) + return -ENOMEM; +- } + + drvr->settings->sdiod_txglomsz = brcmf_sdiod_txglomsz; + drvr->settings->p2p_enable = !!brcmf_p2p_enable; +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h +@@ -15,6 +15,8 @@ + #ifndef BRCMFMAC_COMMON_H + #define BRCMFMAC_COMMON_H + ++#include "fwil_types.h" ++ + extern const u8 ALLFFMAC[ETH_ALEN]; + + #define BRCMF_FW_ALTPATH_LEN 256 +@@ -39,6 +41,33 @@ struct brcmf_mp_global_t { + extern struct brcmf_mp_global_t brcmf_mp_global; + + /** ++ * struct cc_entry - Struct for translating user space country code (iso3166) to ++ * firmware country code and revision. ++ * ++ * @iso3166: iso3166 alpha 2 country code string. ++ * @cc: firmware country code string. ++ * @rev: firmware country code revision. ++ */ ++struct cc_entry { ++ char iso3166[BRCMF_COUNTRY_BUF_SZ]; ++ char cc[BRCMF_COUNTRY_BUF_SZ]; ++ s32 rev; ++}; ++ ++/** ++ * struct cc_translate - Struct for translating country codes as set by user ++ * space to a country code and rev which can be used by ++ * firmware. ++ * ++ * @table_size: number of entries in table (> 0) ++ * @table: dynamic array of 1 or more elements with translation information. ++ */ ++struct cc_translate { ++ int table_size; ++ struct cc_entry table[0]; ++}; ++ ++/** + * struct brcmf_mp_device - Device module paramaters. + * + * @sdiod_txglomsz: SDIO txglom size. +@@ -47,6 +76,7 @@ extern struct brcmf_mp_global_t brcmf_mp + * @feature_disable: Feature_disable bitmask. + * @fcmode: FWS flow control. + * @roamoff: Firmware roaming off? ++ * @country_codes: If available, pointer to struct for translating country codes + */ + struct brcmf_mp_device { + int sdiod_txglomsz; +@@ -56,6 +86,7 @@ struct brcmf_mp_device { + int fcmode; + bool roamoff; + bool ignore_probe_fail; ++ struct cc_translate *country_codes; + }; + + void brcmf_mp_attach(void); +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h +@@ -134,6 +134,8 @@ + #define BRCMF_PFN_MAC_OUI_ONLY BIT(0) + #define BRCMF_PFN_SET_MAC_UNASSOC BIT(1) + ++#define BRCMF_MCSSET_LEN 16 ++ + /* join preference types for join_pref iovar */ + enum brcmf_join_pref_types { + BRCMF_JOIN_PREF_RSSI = 1, +@@ -279,7 +281,7 @@ struct brcmf_bss_info_le { + __le32 reserved32[1]; /* Reserved for expansion of BSS properties */ + u8 flags; /* flags */ + u8 reserved[3]; /* Reserved for expansion of BSS properties */ +- u8 basic_mcs[MCSSET_LEN]; /* 802.11N BSS required MCS set */ ++ u8 basic_mcs[BRCMF_MCSSET_LEN]; /* 802.11N BSS required MCS set */ + + __le16 ie_offset; /* offset at which IEs start, from beginning */ + __le32 ie_length; /* byte length of Information Elements */ |