diff options
Diffstat (limited to 'package/libertas/src/host.h')
| -rw-r--r-- | package/libertas/src/host.h | 286 |
1 files changed, 286 insertions, 0 deletions
diff --git a/package/libertas/src/host.h b/package/libertas/src/host.h new file mode 100644 index 0000000..64178cf --- /dev/null +++ b/package/libertas/src/host.h @@ -0,0 +1,286 @@ +/** + * This file contains definitions of WLAN commands. + */ + +#ifndef _LBS_HOST_H_ +#define _LBS_HOST_H_ + +/** PUBLIC DEFINITIONS */ +#define DEFAULT_AD_HOC_CHANNEL 6 +#define DEFAULT_AD_HOC_CHANNEL_A 36 + +/** IEEE 802.11 oids */ +#define OID_802_11_SSID 0x00008002 +#define OID_802_11_INFRASTRUCTURE_MODE 0x00008008 +#define OID_802_11_FRAGMENTATION_THRESHOLD 0x00008009 +#define OID_802_11_RTS_THRESHOLD 0x0000800A +#define OID_802_11_TX_ANTENNA_SELECTED 0x0000800D +#define OID_802_11_SUPPORTED_RATES 0x0000800E +#define OID_802_11_STATISTICS 0x00008012 +#define OID_802_11_TX_RETRYCOUNT 0x0000801D +#define OID_802_11D_ENABLE 0x00008020 + +#define CMD_OPTION_WAITFORRSP 0x0002 + +/** Host command IDs */ + +/* Return command are almost always the same as the host command, but with + * bit 15 set high. There are a few exceptions, though... + */ +#define CMD_RET(cmd) (0x8000 | cmd) + +/* Return command convention exceptions: */ +#define CMD_RET_802_11_ASSOCIATE 0x8012 + +/* Command codes */ +#define CMD_CODE_DNLD 0x0002 +#define CMD_GET_HW_SPEC 0x0003 +#define CMD_EEPROM_UPDATE 0x0004 +#define CMD_802_11_RESET 0x0005 +#define CMD_802_11_SCAN 0x0006 +#define CMD_802_11_GET_LOG 0x000b +#define CMD_MAC_MULTICAST_ADR 0x0010 +#define CMD_802_11_AUTHENTICATE 0x0011 +#define CMD_802_11_EEPROM_ACCESS 0x0059 +#define CMD_802_11_ASSOCIATE 0x0050 +#define CMD_802_11_SET_WEP 0x0013 +#define CMD_802_11_GET_STAT 0x0014 +#define CMD_802_3_GET_STAT 0x0015 +#define CMD_802_11_SNMP_MIB 0x0016 +#define CMD_MAC_REG_MAP 0x0017 +#define CMD_BBP_REG_MAP 0x0018 +#define CMD_MAC_REG_ACCESS 0x0019 +#define CMD_BBP_REG_ACCESS 0x001a +#define CMD_RF_REG_ACCESS 0x001b +#define CMD_802_11_RADIO_CONTROL 0x001c +#define CMD_802_11_RF_CHANNEL 0x001d +#define CMD_802_11_RF_TX_POWER 0x001e +#define CMD_802_11_RSSI 0x001f +#define CMD_802_11_RF_ANTENNA 0x0020 +#define CMD_802_11_PS_MODE 0x0021 +#define CMD_802_11_DATA_RATE 0x0022 +#define CMD_RF_REG_MAP 0x0023 +#define CMD_802_11_DEAUTHENTICATE 0x0024 +#define CMD_802_11_REASSOCIATE 0x0025 +#define CMD_802_11_DISASSOCIATE 0x0026 +#define CMD_MAC_CONTROL 0x0028 +#define CMD_802_11_AD_HOC_START 0x002b +#define CMD_802_11_AD_HOC_JOIN 0x002c +#define CMD_802_11_QUERY_TKIP_REPLY_CNTRS 0x002e +#define CMD_802_11_ENABLE_RSN 0x002f +#define CMD_802_11_PAIRWISE_TSC 0x0036 +#define CMD_802_11_GROUP_TSC 0x0037 +#define CMD_802_11_SET_AFC 0x003c +#define CMD_802_11_GET_AFC 0x003d +#define CMD_802_11_AD_HOC_STOP 0x0040 +#define CMD_802_11_BEACON_STOP 0x0049 +#define CMD_802_11_MAC_ADDRESS 0x004d +#define CMD_802_11_LED_GPIO_CTRL 0x004e +#define CMD_802_11_EEPROM_ACCESS 0x0059 +#define CMD_802_11_BAND_CONFIG 0x0058 +#define CMD_802_11D_DOMAIN_INFO 0x005b +#define CMD_802_11_KEY_MATERIAL 0x005e +#define CMD_802_11_SLEEP_PARAMS 0x0066 +#define CMD_802_11_INACTIVITY_TIMEOUT 0x0067 +#define CMD_802_11_TPC_CFG 0x0072 +#define CMD_802_11_PWR_CFG 0x0073 +#define CMD_802_11_SUBSCRIBE_EVENT 0x0075 +#define CMD_802_11_RATE_ADAPT_RATESET 0x0076 +#define CMD_802_11_TX_RATE_QUERY 0x007f +#define CMD_GET_TSF 0x0080 +#define CMD_BT_ACCESS 0x0087 +#define CMD_FWT_ACCESS 0x0095 +#define CMD_802_11_MONITOR_MODE 0x0098 +#define CMD_MESH_ACCESS 0x009b +#define CMD_MESH_CONFIG 0x00a3 +#define CMD_SET_BOOT2_VER 0x00a5 +#define CMD_802_11_BEACON_CTRL 0x00b0 + +/* For the IEEE Power Save */ +#define CMD_SUBCMD_ENTER_PS 0x0030 +#define CMD_SUBCMD_EXIT_PS 0x0031 +#define CMD_SUBCMD_SLEEP_CONFIRMED 0x0034 +#define CMD_SUBCMD_FULL_POWERDOWN 0x0035 +#define CMD_SUBCMD_FULL_POWERUP 0x0036 + +#define CMD_ENABLE_RSN 0x0001 +#define CMD_DISABLE_RSN 0x0000 + +#define CMD_ACT_GET 0x0000 +#define CMD_ACT_SET 0x0001 +#define CMD_ACT_GET_AES 0x0002 +#define CMD_ACT_SET_AES 0x0003 +#define CMD_ACT_REMOVE_AES 0x0004 + +/* Define action or option for CMD_802_11_SET_WEP */ +#define CMD_ACT_ADD 0x0002 +#define CMD_ACT_REMOVE 0x0004 +#define CMD_ACT_USE_DEFAULT 0x0008 + +#define CMD_TYPE_WEP_40_BIT 0x01 +#define CMD_TYPE_WEP_104_BIT 0x02 + +#define CMD_NUM_OF_WEP_KEYS 4 + +#define CMD_WEP_KEY_INDEX_MASK 0x3fff + +/* Define action or option for CMD_802_11_RESET */ +#define CMD_ACT_HALT 0x0003 + +/* Define action or option for CMD_802_11_SCAN */ +#define CMD_BSS_TYPE_BSS 0x0001 +#define CMD_BSS_TYPE_IBSS 0x0002 +#define CMD_BSS_TYPE_ANY 0x0003 + +/* Define action or option for CMD_802_11_SCAN */ +#define CMD_SCAN_TYPE_ACTIVE 0x0000 +#define CMD_SCAN_TYPE_PASSIVE 0x0001 + +#define CMD_SCAN_RADIO_TYPE_BG 0 + +#define CMD_SCAN_PROBE_DELAY_TIME 0 + +/* Define action or option for CMD_MAC_CONTROL */ +#define CMD_ACT_MAC_RX_ON 0x0001 +#define CMD_ACT_MAC_TX_ON 0x0002 +#define CMD_ACT_MAC_LOOPBACK_ON 0x0004 +#define CMD_ACT_MAC_WEP_ENABLE 0x0008 +#define CMD_ACT_MAC_INT_ENABLE 0x0010 +#define CMD_ACT_MAC_MULTICAST_ENABLE 0x0020 +#define CMD_ACT_MAC_BROADCAST_ENABLE 0x0040 +#define CMD_ACT_MAC_PROMISCUOUS_ENABLE 0x0080 +#define CMD_ACT_MAC_ALL_MULTICAST_ENABLE 0x0100 +#define CMD_ACT_MAC_STRICT_PROTECTION_ENABLE 0x0400 + +/* Define action or option for CMD_802_11_RADIO_CONTROL */ +#define CMD_TYPE_AUTO_PREAMBLE 0x0001 +#define CMD_TYPE_SHORT_PREAMBLE 0x0002 +#define CMD_TYPE_LONG_PREAMBLE 0x0003 + +/* Event flags for CMD_802_11_SUBSCRIBE_EVENT */ +#define CMD_SUBSCRIBE_RSSI_LOW 0x0001 +#define CMD_SUBSCRIBE_SNR_LOW 0x0002 +#define CMD_SUBSCRIBE_FAILCOUNT 0x0004 +#define CMD_SUBSCRIBE_BCNMISS 0x0008 +#define CMD_SUBSCRIBE_RSSI_HIGH 0x0010 +#define CMD_SUBSCRIBE_SNR_HIGH 0x0020 + +#define TURN_ON_RF 0x01 +#define RADIO_ON 0x01 +#define RADIO_OFF 0x00 + +#define SET_AUTO_PREAMBLE 0x05 +#define SET_SHORT_PREAMBLE 0x03 +#define SET_LONG_PREAMBLE 0x01 + +/* Define action or option for CMD_802_11_RF_CHANNEL */ +#define CMD_OPT_802_11_RF_CHANNEL_GET 0x00 +#define CMD_OPT_802_11_RF_CHANNEL_SET 0x01 + +/* Define action or option for CMD_802_11_RF_TX_POWER */ +#define CMD_ACT_TX_POWER_OPT_GET 0x0000 +#define CMD_ACT_TX_POWER_OPT_SET_HIGH 0x8007 +#define CMD_ACT_TX_POWER_OPT_SET_MID 0x8004 +#define CMD_ACT_TX_POWER_OPT_SET_LOW 0x8000 + +#define CMD_ACT_TX_POWER_INDEX_HIGH 0x0007 +#define CMD_ACT_TX_POWER_INDEX_MID 0x0004 +#define CMD_ACT_TX_POWER_INDEX_LOW 0x0000 + +/* Define action or option for CMD_802_11_DATA_RATE */ +#define CMD_ACT_SET_TX_AUTO 0x0000 +#define CMD_ACT_SET_TX_FIX_RATE 0x0001 +#define CMD_ACT_GET_TX_RATE 0x0002 + +#define CMD_ACT_SET_RX 0x0001 +#define CMD_ACT_SET_TX 0x0002 +#define CMD_ACT_SET_BOTH 0x0003 +#define CMD_ACT_GET_RX 0x0004 +#define CMD_ACT_GET_TX 0x0008 +#define CMD_ACT_GET_BOTH 0x000c + +/* Define action or option for CMD_802_11_PS_MODE */ +#define CMD_TYPE_CAM 0x0000 +#define CMD_TYPE_MAX_PSP 0x0001 +#define CMD_TYPE_FAST_PSP 0x0002 + +/* Define action or option for CMD_BT_ACCESS */ +enum cmd_bt_access_opts { + /* The bt commands start at 5 instead of 1 because the old dft commands + * are mapped to 1-4. These old commands are no longer maintained and + * should not be called. + */ + CMD_ACT_BT_ACCESS_ADD = 5, + CMD_ACT_BT_ACCESS_DEL, + CMD_ACT_BT_ACCESS_LIST, + CMD_ACT_BT_ACCESS_RESET, + CMD_ACT_BT_ACCESS_SET_INVERT, + CMD_ACT_BT_ACCESS_GET_INVERT +}; + +/* Define action or option for CMD_FWT_ACCESS */ +enum cmd_fwt_access_opts { + CMD_ACT_FWT_ACCESS_ADD = 1, + CMD_ACT_FWT_ACCESS_DEL, + CMD_ACT_FWT_ACCESS_LOOKUP, + CMD_ACT_FWT_ACCESS_LIST, + CMD_ACT_FWT_ACCESS_LIST_ROUTE, + CMD_ACT_FWT_ACCESS_LIST_NEIGHBOR, + CMD_ACT_FWT_ACCESS_RESET, + CMD_ACT_FWT_ACCESS_CLEANUP, + CMD_ACT_FWT_ACCESS_TIME, +}; + +/* Define action or option for CMD_MESH_ACCESS */ +enum cmd_mesh_access_opts { + CMD_ACT_MESH_GET_TTL = 1, + CMD_ACT_MESH_SET_TTL, + CMD_ACT_MESH_GET_STATS, + CMD_ACT_MESH_GET_ANYCAST, + CMD_ACT_MESH_SET_ANYCAST, + CMD_ACT_MESH_SET_LINK_COSTS, + CMD_ACT_MESH_GET_LINK_COSTS, + CMD_ACT_MESH_SET_BCAST_RATE, + CMD_ACT_MESH_GET_BCAST_RATE, + CMD_ACT_MESH_SET_RREQ_DELAY, + CMD_ACT_MESH_GET_RREQ_DELAY, + CMD_ACT_MESH_SET_ROUTE_EXP, + CMD_ACT_MESH_GET_ROUTE_EXP, + CMD_ACT_MESH_SET_AUTOSTART_ENABLED, + CMD_ACT_MESH_GET_AUTOSTART_ENABLED, +}; + +/** Card Event definition */ +#define MACREG_INT_CODE_TX_PPA_FREE 0 +#define MACREG_INT_CODE_TX_DMA_DONE 1 +#define MACREG_INT_CODE_LINK_LOST_W_SCAN 2 +#define MACREG_INT_CODE_LINK_LOST_NO_SCAN 3 +#define MACREG_INT_CODE_LINK_SENSED 4 +#define MACREG_INT_CODE_CMD_FINISHED 5 +#define MACREG_INT_CODE_MIB_CHANGED 6 +#define MACREG_INT_CODE_INIT_DONE 7 +#define MACREG_INT_CODE_DEAUTHENTICATED 8 +#define MACREG_INT_CODE_DISASSOCIATED 9 +#define MACREG_INT_CODE_PS_AWAKE 10 +#define MACREG_INT_CODE_PS_SLEEP 11 +#define MACREG_INT_CODE_MIC_ERR_MULTICAST 13 +#define MACREG_INT_CODE_MIC_ERR_UNICAST 14 +#define MACREG_INT_CODE_WM_AWAKE 15 +#define MACREG_INT_CODE_DEEP_SLEEP_AWAKE 16 +#define MACREG_INT_CODE_ADHOC_BCN_LOST 17 +#define MACREG_INT_CODE_HOST_AWAKE 18 +#define MACREG_INT_CODE_STOP_TX 19 +#define MACREG_INT_CODE_START_TX 20 +#define MACREG_INT_CODE_CHANNEL_SWITCH 21 +#define MACREG_INT_CODE_MEASUREMENT_RDY 22 +#define MACREG_INT_CODE_WMM_CHANGE 23 +#define MACREG_INT_CODE_BG_SCAN_REPORT 24 +#define MACREG_INT_CODE_RSSI_LOW 25 +#define MACREG_INT_CODE_SNR_LOW 26 +#define MACREG_INT_CODE_MAX_FAIL 27 +#define MACREG_INT_CODE_RSSI_HIGH 28 +#define MACREG_INT_CODE_SNR_HIGH 29 +#define MACREG_INT_CODE_MESH_AUTO_STARTED 35 +#define MACREG_INT_CODE_FIRMWARE_READY 48 + +#endif |