summaryrefslogtreecommitdiff
path: root/package/mac80211/patches/300-pending_work.patch
diff options
context:
space:
mode:
Diffstat (limited to 'package/mac80211/patches/300-pending_work.patch')
-rw-r--r--package/mac80211/patches/300-pending_work.patch71
1 files changed, 53 insertions, 18 deletions
diff --git a/package/mac80211/patches/300-pending_work.patch b/package/mac80211/patches/300-pending_work.patch
index 2ad4828..46e539b 100644
--- a/package/mac80211/patches/300-pending_work.patch
+++ b/package/mac80211/patches/300-pending_work.patch
@@ -822,7 +822,24 @@
* @ssid_len: Length of SSID given in @ssid.
* @hidden_ssid: The SSID of the current vif is hidden. Only valid in AP-mode.
* @txpower: TX power in dBm
-@@ -562,6 +562,9 @@ enum mac80211_rate_control_flags {
+@@ -459,6 +459,8 @@ struct ieee80211_bss_conf {
+ * @IEEE80211_TX_CTL_DONTFRAG: Don't fragment this packet even if it
+ * would be fragmented by size (this is optional, only used for
+ * monitor injection).
++ * @IEEE80211_TX_CTL_PS_RESPONSE: This frame is a response to a poll
++ * frame (PS-Poll or uAPSD).
+ *
+ * Note: If you have to add new flags to the enumeration, then don't
+ * forget to update %IEEE80211_TX_TEMPORARY_FLAGS when necessary.
+@@ -494,6 +496,7 @@ enum mac80211_tx_control_flags {
+ IEEE80211_TX_STATUS_EOSP = BIT(28),
+ IEEE80211_TX_CTL_USE_MINRATE = BIT(29),
+ IEEE80211_TX_CTL_DONTFRAG = BIT(30),
++ IEEE80211_TX_CTL_PS_RESPONSE = BIT(31),
+ };
+
+ #define IEEE80211_TX_CTL_STBC_SHIFT 23
+@@ -562,6 +565,9 @@ enum mac80211_rate_control_flags {
/* maximum number of rate stages */
#define IEEE80211_TX_MAX_RATES 4
@@ -832,7 +849,7 @@
/**
* struct ieee80211_tx_rate - rate selection/status
*
-@@ -602,8 +605,8 @@ static inline void ieee80211_rate_set_vh
+@@ -602,8 +608,8 @@ static inline void ieee80211_rate_set_vh
u8 mcs, u8 nss)
{
WARN_ON(mcs & ~0xF);
@@ -843,7 +860,7 @@
}
static inline u8
-@@ -615,7 +618,7 @@ ieee80211_rate_get_vht_mcs(const struct
+@@ -615,7 +621,7 @@ ieee80211_rate_get_vht_mcs(const struct
static inline u8
ieee80211_rate_get_vht_nss(const struct ieee80211_tx_rate *rate)
{
@@ -852,7 +869,7 @@
}
/**
-@@ -656,7 +659,11 @@ struct ieee80211_tx_info {
+@@ -656,7 +662,11 @@ struct ieee80211_tx_info {
struct ieee80211_tx_rate rates[
IEEE80211_TX_MAX_RATES];
s8 rts_cts_rate_idx;
@@ -865,7 +882,7 @@
};
/* only needed before rate control */
unsigned long jiffies;
-@@ -677,6 +684,8 @@ struct ieee80211_tx_info {
+@@ -677,6 +687,8 @@ struct ieee80211_tx_info {
struct {
struct ieee80211_tx_rate driver_rates[
IEEE80211_TX_MAX_RATES];
@@ -874,7 +891,7 @@
void *rate_driver_data[
IEEE80211_TX_INFO_RATE_DRIVER_DATA_SIZE / sizeof(void *)];
};
-@@ -840,6 +849,9 @@ enum mac80211_rx_flags {
+@@ -840,6 +852,9 @@ enum mac80211_rx_flags {
* @signal: signal strength when receiving this frame, either in dBm, in dB or
* unspecified depending on the hardware capabilities flags
* @IEEE80211_HW_SIGNAL_*
@@ -884,7 +901,7 @@
* @antenna: antenna used
* @rate_idx: index of data rate into band's supported rates or MCS index if
* HT or VHT is used (%RX_FLAG_HT/%RX_FLAG_VHT)
-@@ -871,6 +883,8 @@ struct ieee80211_rx_status {
+@@ -871,6 +886,8 @@ struct ieee80211_rx_status {
u8 band;
u8 antenna;
s8 signal;
@@ -893,7 +910,7 @@
u8 ampdu_delimiter_crc;
u8 vendor_radiotap_align;
u8 vendor_radiotap_oui[3];
-@@ -1018,13 +1032,13 @@ struct ieee80211_conf {
+@@ -1018,13 +1035,13 @@ struct ieee80211_conf {
* the driver passed into mac80211.
* @block_tx: Indicates whether transmission must be blocked before the
* scheduled channel switch, as indicated by the AP.
@@ -909,7 +926,7 @@
u8 count;
};
-@@ -1222,6 +1236,24 @@ enum ieee80211_sta_rx_bandwidth {
+@@ -1222,6 +1239,24 @@ enum ieee80211_sta_rx_bandwidth {
};
/**
@@ -934,7 +951,7 @@
* struct ieee80211_sta - station table entry
*
* A station table entry represents a station we are possibly
-@@ -1248,6 +1280,7 @@ enum ieee80211_sta_rx_bandwidth {
+@@ -1248,6 +1283,7 @@ enum ieee80211_sta_rx_bandwidth {
* notifications and capabilities. The value is only valid after
* the station moves to associated state.
* @smps_mode: current SMPS mode (off, static or dynamic)
@@ -942,7 +959,7 @@
*/
struct ieee80211_sta {
u32 supp_rates[IEEE80211_NUM_BANDS];
-@@ -1261,6 +1294,7 @@ struct ieee80211_sta {
+@@ -1261,6 +1297,7 @@ struct ieee80211_sta {
u8 rx_nss;
enum ieee80211_sta_rx_bandwidth bandwidth;
enum ieee80211_smps_mode smps_mode;
@@ -950,7 +967,7 @@
/* must be last */
u8 drv_priv[0] __aligned(sizeof(void *));
-@@ -1416,6 +1450,9 @@ struct ieee80211_tx_control {
+@@ -1416,6 +1453,9 @@ struct ieee80211_tx_control {
* for different virtual interfaces. See the doc section on HW queue
* control for more details.
*
@@ -960,7 +977,7 @@
* @IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF: Use the P2P Device address for any
* P2P Interface. This will be honoured even if more than one interface
* is supported.
-@@ -1448,6 +1485,7 @@ enum ieee80211_hw_flags {
+@@ -1448,6 +1488,7 @@ enum ieee80211_hw_flags {
IEEE80211_HW_SUPPORTS_PER_STA_GTK = 1<<21,
IEEE80211_HW_AP_LINK_PS = 1<<22,
IEEE80211_HW_TX_AMPDU_SETUP_IN_HW = 1<<23,
@@ -968,7 +985,7 @@
IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF = 1<<25,
IEEE80211_HW_TIMING_BEACON_ONLY = 1<<26,
};
-@@ -3144,6 +3182,25 @@ void ieee80211_sta_set_buffered(struct i
+@@ -3144,6 +3185,25 @@ void ieee80211_sta_set_buffered(struct i
u8 tid, bool buffered);
/**
@@ -994,7 +1011,7 @@
* ieee80211_tx_status - transmit status callback
*
* Call this function for all transmitted frames after they have been
-@@ -4118,7 +4175,7 @@ void ieee80211_send_bar(struct ieee80211
+@@ -4118,7 +4178,7 @@ void ieee80211_send_bar(struct ieee80211
* (deprecated; this will be removed once drivers get updated to use
* rate_idx_mask)
* @rate_idx_mask: user-requested (legacy) rate mask
@@ -1003,7 +1020,7 @@
* @bss: whether this frame is sent out in AP or IBSS mode
*/
struct ieee80211_tx_rate_control {
-@@ -4130,7 +4187,7 @@ struct ieee80211_tx_rate_control {
+@@ -4130,7 +4190,7 @@ struct ieee80211_tx_rate_control {
bool rts, short_preamble;
u8 max_rate_idx;
u32 rate_idx_mask;
@@ -1012,7 +1029,7 @@
bool bss;
};
-@@ -4219,6 +4276,22 @@ bool rate_usable_index_exists(struct iee
+@@ -4219,6 +4279,22 @@ bool rate_usable_index_exists(struct iee
return false;
}
@@ -3952,6 +3969,24 @@
if (sta_prepare_rate_control(local, sta, gfp)) {
kfree(sta);
+@@ -1130,6 +1132,7 @@ static void ieee80211_send_null_response
+ * ends the poll/service period.
+ */
+ info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER |
++ IEEE80211_TX_CTL_PS_RESPONSE |
+ IEEE80211_TX_STATUS_EOSP |
+ IEEE80211_TX_CTL_REQ_TX_STATUS;
+
+@@ -1267,7 +1270,8 @@ ieee80211_sta_ps_deliver_response(struct
+ * STA may still remain is PS mode after this frame
+ * exchange.
+ */
+- info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER;
++ info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER |
++ IEEE80211_TX_CTL_PS_RESPONSE;
+
+ /*
+ * Use MoreData flag to indicate whether there are
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -2270,6 +2270,7 @@ static const struct nla_policy mntr_flag
@@ -4737,7 +4772,7 @@
}
- ath_tx_start_dma(sc, skb, txctl);
-+ if (info->flags & IEEE80211_TX_CTL_NO_PS_BUFFER) {
++ if (info->flags & IEEE80211_TX_CTL_PS_RESPONSE) {
+ ath_txq_unlock(sc, txq);
+ txq = sc->tx.uapsdq;
+ ath_txq_lock(sc, txq);
generated by cgit v1.1 at 2024-11-02 04:48:11 +0000