diff options
Diffstat (limited to 'package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch')
| -rw-r--r-- | package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch | 49 |
1 files changed, 25 insertions, 24 deletions
diff --git a/package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch b/package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch index 89323f5..6b9d282 100644 --- a/package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch +++ b/package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch @@ -1,30 +1,31 @@ -From c5d3ab153ef4b68c9c6fab32f6f292c4394b72d3 Mon Sep 17 00:00:00 2001 +From 8dff6729a634d7cf223679d9a29a3df77927540c Mon Sep 17 00:00:00 2001 From: Ivo van Doorn <IvDoorn@gmail.com> -Date: Thu, 21 May 2009 19:21:31 +0200 -Subject: [PATCH 2/2] rt2x00: Implement support for rt2800pci +Date: Sat, 8 Aug 2009 23:47:53 +0200 +Subject: [PATCH 2/3] rt2x00: Implement support for rt2800pci Add support for the rt2800pci chipset. -Includes various patches from Mattias, Mark, Felix and Xose. +Includes various patches from Luis, Mattias, Mark, Felix and Xose. Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de> Signed-off-by: Mark Asselstine <asselsm@gmail.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> +Signed-off-by: Luis Correia <luis.f.correia@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> --- drivers/net/wireless/rt2x00/Kconfig | 26 + drivers/net/wireless/rt2x00/Makefile | 1 + - drivers/net/wireless/rt2x00/rt2800pci.c | 3241 +++++++++++++++++++++++++++++++ + drivers/net/wireless/rt2x00/rt2800pci.c | 3243 +++++++++++++++++++++++++++++++ drivers/net/wireless/rt2x00/rt2800pci.h | 1929 ++++++++++++++++++ drivers/net/wireless/rt2x00/rt2x00.h | 6 + - 5 files changed, 5203 insertions(+), 0 deletions(-) + 5 files changed, 5205 insertions(+), 0 deletions(-) create mode 100644 drivers/net/wireless/rt2x00/rt2800pci.c create mode 100644 drivers/net/wireless/rt2x00/rt2800pci.h --- a/drivers/net/wireless/rt2x00/Makefile +++ b/drivers/net/wireless/rt2x00/Makefile -@@ -17,6 +17,7 @@ obj-$(CONFIG_RT2X00_LIB_USB) += rt2x00u +@@ -16,6 +16,7 @@ obj-$(CONFIG_RT2X00_LIB_USB) += rt2x00u obj-$(CONFIG_RT2400PCI) += rt2400pci.o obj-$(CONFIG_RT2500PCI) += rt2500pci.o obj-$(CONFIG_RT61PCI) += rt61pci.o @@ -412,7 +413,6 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> +}; +#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ + -+#ifdef CONFIG_RT2X00_LIB_RFKILL +static int rt2800pci_rfkill_poll(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; @@ -420,9 +420,6 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + rt2x00pci_register_read(rt2x00dev, GPIO_CTRL_CFG, ®); + return rt2x00_get_field32(reg, GPIO_CTRL_CFG_BIT2); +} -+#else -+#define rt2800pci_rfkill_poll NULL -+#endif /* CONFIG_RT2X00_LIB_RFKILL */ + +#ifdef CONFIG_RT2X00_LIB_LEDS +static void rt2800pci_brightness_set(struct led_classdev *led_cdev, @@ -661,7 +658,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_RTS, + !(filter_flags & FIF_CONTROL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PSPOLL, -+ !(filter_flags & FIF_CONTROL)); ++ !(filter_flags & FIF_PSPOLL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BA, 1); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BAR, 0); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CNTL, @@ -2078,9 +2075,9 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + enum dev_state state) +{ + /* -+ * Always put the device to sleep (even when we intend to wakup!) ++ * Always put the device to sleep (even when we intend to wakeup!) + * if the device is booting and wasn't asleep it will return -+ * failure when attempting to wakup. ++ * failure when attempting to wakeup. + */ + rt2800pci_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2); + @@ -2102,7 +2099,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + /* + * Before the radio can be enabled, the device first has + * to be woken up. After that it needs a bit of time -+ * to be fully awake and the radio can be enabled. ++ * to be fully awake and then the radio can be enabled. + */ + rt2800pci_set_state(rt2x00dev, STATE_AWAKE); + msleep(1); @@ -2110,7 +2107,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + break; + case STATE_RADIO_OFF: + /* -+ * After the radio has been disablee, the device should ++ * After the radio has been disabled, the device should + * be put to sleep for powersaving. + */ + rt2800pci_disable_radio(rt2x00dev); @@ -2250,8 +2247,6 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + * otherwise we might be sending out invalid data. + */ + rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, ®); -+ rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 0); -+ rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 0); + rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0); + rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg); + @@ -2715,10 +2710,8 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + /* + * Detect if this device has an hardware controlled radio. + */ -+#ifdef CONFIG_RT2X00_LIB_RFKILL + if (rt2x00_get_field16(eeprom, EEPROM_NIC_HW_RADIO)) + __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags); -+#endif /* CONFIG_RT2X00_LIB_RFKILL */ + + /* + * Store led settings, for correct led behaviour. @@ -2934,6 +2927,13 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + return retval; + + /* ++ * This device has multiple filters for control frames ++ * and has a separate filter for PS Poll frames. ++ */ ++ __set_bit(DRIVER_SUPPORT_CONTROL_FILTERS, &rt2x00dev->flags); ++ __set_bit(DRIVER_SUPPORT_CONTROL_FILTER_PSPOLL, &rt2x00dev->flags); ++ ++ /* + * This device requires firmware. + */ + if (!rt2x00_rt(&rt2x00dev->chip, RT2880) && @@ -3104,6 +3104,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + .conf_tx = rt2800pci_conf_tx, + .get_tx_stats = rt2x00mac_get_tx_stats, + .get_tsf = rt2800pci_get_tsf, ++ .rfkill_poll = rt2x00mac_rfkill_poll, +}; + +static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = { @@ -3340,7 +3341,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + +/* + * Signal information. -+ * Defaul offset is required for RSSI <-> dBm conversion. ++ * Default offset is required for RSSI <-> dBm conversion. + */ +#define DEFAULT_RSSI_OFFSET 120 /* FIXME */ + @@ -5045,7 +5046,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + +/* + * Word3 -+ * WIV: Wireless Info Valid. 1: Driver filled WI, 0: DMA needs to copy WI ++ * WIV: Wireless Info Valid. 1: Driver filled WI, 0: DMA needs to copy WI + * QSEL: Select on-chip FIFO ID for 2nd-stage output scheduler. + * 0:MGMT, 1:HCCA 2:EDCA + */ @@ -5186,7 +5187,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> +#define RXWI_W3_SNR1 FIELD32(0x0000ff00) + +/* -+ * Macro's for converting txpower from EEPROM to mac80211 value ++ * Macros for converting txpower from EEPROM to mac80211 value + * and from mac80211 value to register value. + */ +#define MIN_G_TXPOWER 0 @@ -5210,7 +5211,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> +#endif /* RT2800PCI_H */ --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h -@@ -147,6 +147,12 @@ struct rt2x00_chip { +@@ -158,6 +158,12 @@ struct rt2x00_chip { #define RT2561 0x0302 #define RT2661 0x0401 #define RT2571 0x1300 |