diff options
Diffstat (limited to 'package/mac80211/patches')
22 files changed, 691 insertions, 1994 deletions
diff --git a/package/mac80211/patches/301-rt2x00-Implement-support-for-802.11n.patch b/package/mac80211/patches/301-rt2x00-Implement-support-for-802.11n.patch index a218846..c3c07a0 100644 --- a/package/mac80211/patches/301-rt2x00-Implement-support-for-802.11n.patch +++ b/package/mac80211/patches/301-rt2x00-Implement-support-for-802.11n.patch @@ -1,6 +1,6 @@ -From 42d5399c2743dbd1ddaaadc8cb04adbfc65cc970 Mon Sep 17 00:00:00 2001 +From adf33d3a207846709e2a5fb006f17dbc9225f7a9 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn <IvDoorn@gmail.com> -Date: Sat, 10 Jan 2009 11:01:10 +0100 +Date: Fri, 23 Jan 2009 17:10:06 +0100 Subject: [PATCH] rt2x00: Implement support for 802.11n Extend rt2x00lib capabilities to support 802.11n, @@ -58,7 +58,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> }; /* -@@ -604,6 +608,7 @@ enum rt2x00_flags { +@@ -603,6 +607,7 @@ enum rt2x00_flags { CONFIG_EXTERNAL_LNA_BG, CONFIG_DOUBLE_ANTENNA, CONFIG_DISABLE_LINK_TUNING, @@ -295,7 +295,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> +++ b/drivers/net/wireless/rt2x00/rt2x00ht.c @@ -0,0 +1,69 @@ +/* -+ Copyright (C) 2004 - 2008 rt2x00 SourceForge Project ++ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + <http://rt2x00.serialmonkey.com> + + This program is free software; you can redistribute it and/or modify @@ -327,10 +327,10 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + +void rt2x00ht_create_tx_descriptor(struct queue_entry *entry, + struct txentry_desc *txdesc, -+ struct ieee80211_rate *rate) ++ const struct rt2x00_rate *hwrate) +{ + struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb); -+ const struct rt2x00_rate *hwrate = rt2x00_get_rate(rate->hw_value); ++ struct ieee80211_tx_rate *txrate = &tx_info->control.rates[0]; + + if (tx_info->control.sta) + txdesc->mpdu_density = @@ -342,7 +342,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + txdesc->stbc = 0; /* FIXME: What value is needed? */ + + txdesc->mcs = rt2x00_get_rate_mcs(hwrate->mcs); -+ if (rate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) ++ if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) + txdesc->mcs |= 0x08; + + /* @@ -354,13 +354,13 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + /* + * Determine HT Mix/Greenfield rate mode + */ -+ if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_MCS) ++ if (txrate->flags & IEEE80211_TX_RC_MCS) + txdesc->rate_mode = RATE_MODE_HT_MIX; -+ if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_GREEN_FIELD) ++ if (txrate->flags & IEEE80211_TX_RC_GREEN_FIELD) + txdesc->rate_mode = RATE_MODE_HT_GREENFIELD; -+ if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_40_MHZ_WIDTH) ++ if (txrate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH) + __set_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags); -+ if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_SHORT_GI) ++ if (txrate->flags & IEEE80211_TX_RC_SHORT_GI) + __set_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags); +} --- a/drivers/net/wireless/rt2x00/rt2x00lib.h @@ -397,11 +397,11 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> +#ifdef CONFIG_RT2X00_LIB_HT +void rt2x00ht_create_tx_descriptor(struct queue_entry *entry, + struct txentry_desc *txdesc, -+ struct ieee80211_rate *rate); ++ const struct rt2x00_rate *hwrate); +#else +static inline void rt2x00ht_create_tx_descriptor(struct queue_entry *entry, + struct txentry_desc *txdesc, -+ struct ieee80211_rate *rate) ++ const struct rt2x00_rate *hwrate) +{ +} +#endif /* CONFIG_RT2X00_LIB_HT */ @@ -416,7 +416,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> * Apply TX descriptor handling by components */ rt2x00crypto_create_tx_descriptor(entry, txdesc); -+ rt2x00ht_create_tx_descriptor(entry, txdesc, rate); ++ rt2x00ht_create_tx_descriptor(entry, txdesc, hwrate); rt2x00queue_create_tx_descriptor_seq(entry, txdesc); rt2x00queue_create_tx_descriptor_plcp(entry, txdesc, hwrate); } diff --git a/package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch b/package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch index ed697bb..a37362c 100644 --- a/package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch +++ b/package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch @@ -1,6 +1,6 @@ -From dda25991ee4dc0a2ebe2e3b50857971fe1d878c4 Mon Sep 17 00:00:00 2001 +From 659988a6bb83536c5d0a01b0b58378cc1856c975 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn <IvDoorn@gmail.com> -Date: Sat, 10 Jan 2009 11:03:23 +0100 +Date: Fri, 23 Jan 2009 17:13:03 +0100 Subject: [PATCH] rt2x00: Implement support for rt2800pci Add support for the rt2800pci chipset. @@ -14,10 +14,10 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> --- drivers/net/wireless/rt2x00/Kconfig | 15 + drivers/net/wireless/rt2x00/Makefile | 1 + - drivers/net/wireless/rt2x00/rt2800pci.c | 2707 +++++++++++++++++++++++++++++++ - drivers/net/wireless/rt2x00/rt2800pci.h | 1879 +++++++++++++++++++++ + drivers/net/wireless/rt2x00/rt2800pci.c | 2763 +++++++++++++++++++++++++++++++ + drivers/net/wireless/rt2x00/rt2800pci.h | 1881 +++++++++++++++++++++ drivers/net/wireless/rt2x00/rt2x00.h | 4 + - 5 files changed, 4606 insertions(+), 0 deletions(-) + 5 files changed, 4664 insertions(+), 0 deletions(-) create mode 100644 drivers/net/wireless/rt2x00/rt2800pci.c create mode 100644 drivers/net/wireless/rt2x00/rt2800pci.h @@ -32,9 +32,9 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> obj-$(CONFIG_RT73USB) += rt73usb.o --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2800pci.c -@@ -0,0 +1,2707 @@ +@@ -0,0 +1,2763 @@ +/* -+ Copyright (C) 2004 - 2008 rt2x00 SourceForge Project ++ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + <http://rt2x00.serialmonkey.com> + + This program is free software; you can redistribute it and/or modify @@ -502,8 +502,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + !(filter_flags & FIF_PLCPFAIL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_TO_ME, + !(filter_flags & FIF_PROMISC_IN_BSS)); -+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_MY_BSSD, -+ !(filter_flags & FIF_OTHER_BSS)); ++ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_VER_ERROR, 1); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_MULTICAST, + !(filter_flags & FIF_ALLMULTI)); @@ -638,9 +637,12 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + */ + switch (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH)) { + case 1: ++ rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0); + rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0); + break; + case 2: ++ rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 16); ++ break; + case 3: + /* Do nothing */ + break; @@ -915,6 +917,36 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg); +} + ++static void rt2800pci_config_ps(struct rt2x00_dev *rt2x00dev, ++ struct rt2x00lib_conf *libconf) ++{ ++ enum dev_state state = ++ (libconf->conf->flags & IEEE80211_CONF_PS) ? ++ STATE_SLEEP : STATE_AWAKE; ++ u32 reg; ++ ++ if (state == STATE_SLEEP) { ++ rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0); ++ ++ rt2x00pci_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®); ++ rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5); ++ rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, ++ libconf->conf->listen_interval - 1); ++ rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 1); ++ rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg); ++ ++ rt2800pci_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 0); ++ } else { ++ rt2800pci_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0); ++ ++ rt2x00pci_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®); ++ rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0); ++ rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0); ++ rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 0); ++ rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg); ++ } ++} ++ +static void rt2800pci_config(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf, + const unsigned int flags) @@ -931,6 +963,8 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + rt2800pci_config_retry_limit(rt2x00dev, libconf); + if (flags & IEEE80211_CONF_CHANGE_BEACON_INTERVAL) + rt2800pci_config_duration(rt2x00dev, libconf); ++ if (flags & IEEE80211_CONF_CHANGE_PS) ++ rt2800pci_config_ps(rt2x00dev, libconf); +} + +/* @@ -985,7 +1019,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> +static void rt2800pci_link_tuner(struct rt2x00_dev *rt2x00dev, + struct link_qual *qual, const u32 count) +{ -+ if (rt2x00_rev(&rt2x00dev->chip) == RT2860_VERSION_C) ++ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) + return; + + /* @@ -1035,6 +1069,11 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + unsigned int i; + u32 reg; + ++ if (len != 8192) { ++ ERROR(rt2x00dev, "Invalid firmware file length (len=%zu)\n", len); ++ return -ENOENT; ++ } ++ + /* + * Wait for stable hardware. + */ @@ -1273,7 +1312,11 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + + rt2x00pci_register_read(rt2x00dev, MAX_LEN_CFG, ®); + rt2x00_set_field32(®, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE); -+ rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 1); ++ if (rt2x00_rev(&rt2x00dev->chip) >= RT2880E_VERSION && ++ rt2x00_rev(&rt2x00dev->chip) < RT3070_VERSION) ++ rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 2); ++ else ++ rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 1); + rt2x00_set_field32(®, MAX_LEN_CFG_MIN_PSDU, 0); + rt2x00_set_field32(®, MAX_LEN_CFG_MIN_MPDU, 0); + rt2x00pci_register_write(rt2x00dev, MAX_LEN_CFG, reg); @@ -1375,7 +1418,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + * ASIC will keep garbage value after boot, clear encryption keys. + */ + for (i = 0; i < 254; i++) { -+ u32 wcid[2] = { 0xffffffff, 0x0000ffff }; ++ u32 wcid[2] = { 0xffffffff, 0x00ffffff }; + rt2x00pci_register_multiwrite(rt2x00dev, MAC_WCID_ENTRY(i), + wcid, sizeof(wcid)); + } @@ -1524,12 +1567,12 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + rt2800pci_bbp_write(rt2x00dev, 103, 0x00); + rt2800pci_bbp_write(rt2x00dev, 105, 0x05); + -+ if (rt2x00_rev(&rt2x00dev->chip) == RT2860_VERSION_C) { ++ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) { + rt2800pci_bbp_write(rt2x00dev, 69, 0x16); + rt2800pci_bbp_write(rt2x00dev, 73, 0x12); + } + -+ if (rt2x00_rev(&rt2x00dev->chip) == RT2860_VERSION_D) ++ if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION) + rt2800pci_bbp_write(rt2x00dev, 84, 0x19); + + for (i = 0; i < EEPROM_BBP_SIZE; i++) { @@ -1626,6 +1669,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + if (unlikely(rt2800pci_wait_wpdma_ready(rt2x00dev) || + rt2800pci_init_queues(rt2x00dev) || + rt2800pci_init_registers(rt2x00dev) || ++ rt2800pci_wait_wpdma_ready(rt2x00dev) || + rt2800pci_init_bbp(rt2x00dev))) + return -EIO; + @@ -1634,12 +1678,14 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + */ + rt2800pci_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0); + -+ /* Wait for DMA, ignore error */ -+ rt2800pci_wait_wpdma_ready(rt2x00dev); -+ + /* + * Enable RX. + */ ++ rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, ®); ++ rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1); ++ rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 0); ++ rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg); ++ + rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1); @@ -2164,9 +2210,17 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + } + + rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word); -+ if (word != 0) { -+ /* NIC configuration must always be 0. */ -+ word = 0; ++ if (word == 0xffff) { ++ rt2x00_set_field16(&word, EEPROM_NIC_HW_RADIO, 0); ++ rt2x00_set_field16(&word, EEPROM_NIC_DYNAMIC_TX_AGC, 0); ++ rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_BG, 0); ++ rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_A, 0); ++ rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0); ++ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_BG, 0); ++ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_A, 0); ++ rt2x00_set_field16(&word, EEPROM_NIC_WPS_PBC, 0); ++ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_BG, 0); ++ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_A, 0); + rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word); + EEPROM(rt2x00dev, "NIC: 0x%04x\n", word); + } @@ -2248,13 +2302,14 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + PCI_CONFIG_HEADER_DEVICE, &device); + value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); + rt2x00pci_register_read(rt2x00dev, MAC_CSR0, ®); -+ reg = rt2x00_get_field32(reg, MAC_CSR0_ASIC_REV); + rt2x00_set_chip(rt2x00dev, device, value, reg); + + if (!rt2x00_rf(&rt2x00dev->chip, RF2820) && + !rt2x00_rf(&rt2x00dev->chip, RF2850) && + !rt2x00_rf(&rt2x00dev->chip, RF2720) && -+ !rt2x00_rf(&rt2x00dev->chip, RF2750)) { ++ !rt2x00_rf(&rt2x00dev->chip, RF2750) && ++ !rt2x00_rf(&rt2x00dev->chip, RF3020) && ++ !rt2x00_rf(&rt2x00dev->chip, RF2020)) { + ERROR(rt2x00dev, "Invalid RF chipset detected.\n"); + return -ENODEV; + } @@ -2381,7 +2436,9 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + */ + rt2x00dev->hw->flags = + IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | -+ IEEE80211_HW_SIGNAL_DBM; ++ IEEE80211_HW_SIGNAL_DBM | ++ IEEE80211_HW_SUPPORTS_PS | ++ IEEE80211_HW_PS_NULLFUNC_STACK; + rt2x00dev->hw->extra_tx_headroom = TXWI_DESC_SIZE; + + SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); @@ -2499,33 +2556,34 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + u32 reg; ++ bool enabled = (value < IEEE80211_MAX_RTS_THRESHOLD); + + rt2x00pci_register_read(rt2x00dev, TX_RTS_CFG, ®); + rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES, value); + rt2x00pci_register_write(rt2x00dev, TX_RTS_CFG, reg); + + rt2x00pci_register_read(rt2x00dev, CCK_PROT_CFG, ®); -+ rt2x00_set_field32(®, CCK_PROT_CFG_RTS_TH_EN, 1); ++ rt2x00_set_field32(®, CCK_PROT_CFG_RTS_TH_EN, enabled); + rt2x00pci_register_write(rt2x00dev, CCK_PROT_CFG, reg); + + rt2x00pci_register_read(rt2x00dev, OFDM_PROT_CFG, ®); -+ rt2x00_set_field32(®, OFDM_PROT_CFG_RTS_TH_EN, 1); ++ rt2x00_set_field32(®, OFDM_PROT_CFG_RTS_TH_EN, enabled); + rt2x00pci_register_write(rt2x00dev, OFDM_PROT_CFG, reg); + + rt2x00pci_register_read(rt2x00dev, MM20_PROT_CFG, ®); -+ rt2x00_set_field32(®, MM20_PROT_CFG_RTS_TH_EN, 1); ++ rt2x00_set_field32(®, MM20_PROT_CFG_RTS_TH_EN, enabled); + rt2x00pci_register_write(rt2x00dev, MM20_PROT_CFG, reg); + + rt2x00pci_register_read(rt2x00dev, MM40_PROT_CFG, ®); -+ rt2x00_set_field32(®, MM40_PROT_CFG_RTS_TH_EN, 1); ++ rt2x00_set_field32(®, MM40_PROT_CFG_RTS_TH_EN, enabled); + rt2x00pci_register_write(rt2x00dev, MM40_PROT_CFG, reg); + + rt2x00pci_register_read(rt2x00dev, GF20_PROT_CFG, ®); -+ rt2x00_set_field32(®, GF20_PROT_CFG_RTS_TH_EN, 1); ++ rt2x00_set_field32(®, GF20_PROT_CFG_RTS_TH_EN, enabled); + rt2x00pci_register_write(rt2x00dev, GF20_PROT_CFG, reg); + + rt2x00pci_register_read(rt2x00dev, GF40_PROT_CFG, ®); -+ rt2x00_set_field32(®, GF40_PROT_CFG_RTS_TH_EN, 1); ++ rt2x00_set_field32(®, GF40_PROT_CFG_RTS_TH_EN, enabled); + rt2x00pci_register_write(rt2x00dev, GF40_PROT_CFG, reg); + + return 0; @@ -2551,24 +2609,23 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + if (retval) + return retval; + ++ /* ++ * We only need to perform additional register initialization ++ * for WMM queues/ ++ */ ++ if (queue_idx >= 4) ++ return 0; ++ + queue = rt2x00queue_get_queue(rt2x00dev, queue_idx); + + /* Update WMM TXOP register */ -+ if (queue_idx < 2) { -+ field.bit_offset = queue_idx * 16; -+ field.bit_mask = 0xffff << field.bit_offset; -+ -+ rt2x00pci_register_read(rt2x00dev, WMM_TXOP0_CFG, ®); -+ rt2x00_set_field32(®, field, queue->txop); -+ rt2x00pci_register_write(rt2x00dev, WMM_TXOP0_CFG, reg); -+ } else if (queue_idx < 4) { -+ field.bit_offset = (queue_idx - 2) * 16; -+ field.bit_mask = 0xffff << field.bit_offset; -+ -+ rt2x00pci_register_read(rt2x00dev, WMM_TXOP1_CFG, ®); -+ rt2x00_set_field32(®, field, queue->txop); -+ rt2x00pci_register_write(rt2x00dev, WMM_TXOP1_CFG, reg); -+ } ++ offset = WMM_TXOP0_CFG + (sizeof(u32) * (!!(queue_idx & 2))); ++ field.bit_offset = (queue_idx & 1) * 16; ++ field.bit_mask = 0xffff << field.bit_offset; ++ ++ rt2x00pci_register_read(rt2x00dev, offset, ®); ++ rt2x00_set_field32(®, field, queue->txop); ++ rt2x00pci_register_write(rt2x00dev, offset, reg); + + /* Update WMM registers */ + field.bit_offset = queue_idx * 4; @@ -2587,15 +2644,14 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + rt2x00pci_register_write(rt2x00dev, WMM_CWMAX_CFG, reg); + + /* Update EDCA registers */ -+ if (queue_idx < 4) { -+ offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx); -+ -+ rt2x00pci_register_read(rt2x00dev, offset, ®); -+ rt2x00_set_field32(®, EDCA_AC0_CFG_AIFSN, queue->aifs); -+ rt2x00_set_field32(®, EDCA_AC0_CFG_CWMIN, queue->cw_min); -+ rt2x00_set_field32(®, EDCA_AC0_CFG_CWMAX, queue->cw_max); -+ rt2x00pci_register_write(rt2x00dev, offset, reg); -+ } ++ offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx); ++ ++ rt2x00pci_register_read(rt2x00dev, offset, ®); ++ rt2x00_set_field32(®, EDCA_AC0_CFG_TX_OP, queue->txop); ++ rt2x00_set_field32(®, EDCA_AC0_CFG_AIFSN, queue->aifs); ++ rt2x00_set_field32(®, EDCA_AC0_CFG_CWMIN, queue->cw_min); ++ rt2x00_set_field32(®, EDCA_AC0_CFG_CWMAX, queue->cw_max); ++ rt2x00pci_register_write(rt2x00dev, offset, reg); + + return 0; +} @@ -2742,9 +2798,9 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> +module_exit(rt2800pci_exit); --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2800pci.h -@@ -0,0 +1,1879 @@ +@@ -0,0 +1,1881 @@ +/* -+ Copyright (C) 2004 - 2008 rt2x00 SourceForge Project ++ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + <http://rt2x00.serialmonkey.com> + + This program is free software; you can redistribute it and/or modify @@ -2792,9 +2848,11 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> +/* + * RT2860 version + */ -+#define RT2860_VERSION_C 0x0100 -+#define RT2860_VERSION_D 0x0101 -+#define RT2860_VERSION_E 0x0200 ++#define RT2860C_VERSION 0x28600100 ++#define RT2860D_VERSION 0x28600101 ++#define RT2880E_VERSION 0x28720200 ++#define RT2883_VERSION 0x28830300 ++#define RT3070_VERSION 0x30700200 + +/* + * Signal information. @@ -3412,7 +3470,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + * EDCA_AC0_CFG: + */ +#define EDCA_AC0_CFG 0x1300 -+#define EDCA_AC0_CFG_AC_TX_OP FIELD32(0x000000ff) ++#define EDCA_AC0_CFG_TX_OP FIELD32(0x000000ff) +#define EDCA_AC0_CFG_AIFSN FIELD32(0x00000f00) +#define EDCA_AC0_CFG_CWMIN FIELD32(0x0000f000) +#define EDCA_AC0_CFG_CWMAX FIELD32(0x000f0000) @@ -3421,7 +3479,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + * EDCA_AC1_CFG: + */ +#define EDCA_AC1_CFG 0x1304 -+#define EDCA_AC1_CFG_AC_TX_OP FIELD32(0x000000ff) ++#define EDCA_AC1_CFG_TX_OP FIELD32(0x000000ff) +#define EDCA_AC1_CFG_AIFSN FIELD32(0x00000f00) +#define EDCA_AC1_CFG_CWMIN FIELD32(0x0000f000) +#define EDCA_AC1_CFG_CWMAX FIELD32(0x000f0000) @@ -3430,7 +3488,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + * EDCA_AC2_CFG: + */ +#define EDCA_AC2_CFG 0x1308 -+#define EDCA_AC2_CFG_AC_TX_OP FIELD32(0x000000ff) ++#define EDCA_AC2_CFG_TX_OP FIELD32(0x000000ff) +#define EDCA_AC2_CFG_AIFSN FIELD32(0x00000f00) +#define EDCA_AC2_CFG_CWMIN FIELD32(0x0000f000) +#define EDCA_AC2_CFG_CWMAX FIELD32(0x000f0000) @@ -3439,7 +3497,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + * EDCA_AC3_CFG: + */ +#define EDCA_AC3_CFG 0x130c -+#define EDCA_AC3_CFG_AC_TX_OP FIELD32(0x000000ff) ++#define EDCA_AC3_CFG_TX_OP FIELD32(0x000000ff) +#define EDCA_AC3_CFG_AIFSN FIELD32(0x00000f00) +#define EDCA_AC3_CFG_CWMIN FIELD32(0x0000f000) +#define EDCA_AC3_CFG_CWMAX FIELD32(0x000f0000) diff --git a/package/mac80211/patches/303-rt2x00-Implement-support-for-rt2800usb.patch b/package/mac80211/patches/303-rt2x00-Implement-support-for-rt2800usb.patch index 5b878ab..1da4725 100644 --- a/package/mac80211/patches/303-rt2x00-Implement-support-for-rt2800usb.patch +++ b/package/mac80211/patches/303-rt2x00-Implement-support-for-rt2800usb.patch @@ -1,6 +1,6 @@ -From 22592b5df5bef2754f56e165ee0828777a95fdfd Mon Sep 17 00:00:00 2001 +From e380f1fa260d81cba1ebb1b6c333ef8c31f2a8c5 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn <IvDoorn@gmail.com> -Date: Sat, 10 Jan 2009 11:05:41 +0100 +Date: Fri, 23 Jan 2009 17:16:11 +0100 Subject: [PATCH] rt2x00: Implement support for rt2800usb Add support for the rt2800usb chipset. @@ -13,10 +13,10 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> --- drivers/net/wireless/rt2x00/Kconfig | 14 + drivers/net/wireless/rt2x00/Makefile | 1 + - drivers/net/wireless/rt2x00/rt2800usb.c | 2540 +++++++++++++++++++++++++++++++ - drivers/net/wireless/rt2x00/rt2800usb.h | 1892 +++++++++++++++++++++++ - drivers/net/wireless/rt2x00/rt2x00.h | 1 + - 5 files changed, 4448 insertions(+), 0 deletions(-) + drivers/net/wireless/rt2x00/rt2800usb.c | 2905 +++++++++++++++++++++++++++++++ + drivers/net/wireless/rt2x00/rt2800usb.h | 1944 +++++++++++++++++++++ + drivers/net/wireless/rt2x00/rt2x00.h | 7 + + 5 files changed, 4871 insertions(+), 0 deletions(-) create mode 100644 drivers/net/wireless/rt2x00/rt2800usb.c create mode 100644 drivers/net/wireless/rt2x00/rt2800usb.h @@ -29,9 +29,9 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> +obj-$(CONFIG_RT2800USB) += rt2800usb.o --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2800usb.c -@@ -0,0 +1,2540 @@ +@@ -0,0 +1,2905 @@ +/* -+ Copyright (C) 2004 - 2008 rt2x00 SourceForge Project ++ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + <http://rt2x00.serialmonkey.com> + + This program is free software; you can redistribute it and/or modify @@ -91,6 +91,8 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + */ +#define WAIT_FOR_BBP(__dev, __reg) \ + rt2x00usb_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg)) ++#define WAIT_FOR_RFCSR(__dev, __reg) \ ++ rt2x00usb_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg)) +#define WAIT_FOR_RF(__dev, __reg) \ + rt2x00usb_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg)) +#define WAIT_FOR_MCU(__dev, __reg) \ @@ -152,6 +154,61 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + mutex_unlock(&rt2x00dev->csr_mutex); +} + ++static void rt2800usb_rfcsr_write(struct rt2x00_dev *rt2x00dev, ++ const unsigned int word, const u8 value) ++{ ++ u32 reg; ++ ++ mutex_lock(&rt2x00dev->csr_mutex); ++ ++ /* ++ * Wait until the RFCSR becomes available, afterwards we ++ * can safely write the new data into the register. ++ */ ++ if (WAIT_FOR_RFCSR(rt2x00dev, ®)) { ++ reg = 0; ++ rt2x00_set_field32(®, RF_CSR_CFG_DATA, value); ++ rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); ++ rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 1); ++ rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); ++ ++ rt2x00usb_register_write_lock(rt2x00dev, RF_CSR_CFG, reg); ++ } ++ ++ mutex_unlock(&rt2x00dev->csr_mutex); ++} ++ ++static void rt2800usb_rfcsr_read(struct rt2x00_dev *rt2x00dev, ++ const unsigned int word, u8 *value) ++{ ++ u32 reg; ++ ++ mutex_lock(&rt2x00dev->csr_mutex); ++ ++ /* ++ * Wait until the RFCSR becomes available, afterwards we ++ * can safely write the read request into the register. ++ * After the data has been written, we wait until hardware ++ * returns the correct value, if at any time the register ++ * doesn't become available in time, reg will be 0xffffffff ++ * which means we return 0xff to the caller. ++ */ ++ if (WAIT_FOR_RFCSR(rt2x00dev, ®)) { ++ reg = 0; ++ rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); ++ rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 0); ++ rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); ++ ++ rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg); ++ ++ WAIT_FOR_RFCSR(rt2x00dev, ®); ++ } ++ ++ *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA); ++ ++ mutex_unlock(&rt2x00dev->csr_mutex); ++} ++ +static void rt2800usb_rf_write(struct rt2x00_dev *rt2x00dev, + const unsigned int word, const u32 value) +{ @@ -479,8 +536,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + !(filter_flags & FIF_PLCPFAIL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_TO_ME, + !(filter_flags & FIF_PROMISC_IN_BSS)); -+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_MY_BSSD, -+ !(filter_flags & FIF_OTHER_BSS)); ++ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_VER_ERROR, 1); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_MULTICAST, + !(filter_flags & FIF_ALLMULTI)); @@ -615,9 +671,12 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + */ + switch (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH)) { + case 1: ++ rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0); + rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0); + break; + case 2: ++ rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 16); ++ break; + case 3: + /* Do nothing */ + break; @@ -665,42 +724,24 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + rt2x00dev->lna_gain = lna_gain; +} + -+static void rt2800usb_config_channel(struct rt2x00_dev *rt2x00dev, -+ struct rf_channel *rf, -+ struct channel_info *info) ++static void rt2800usb_config_channel_rt2x(struct rt2x00_dev *rt2x00dev, ++ struct rf_channel *rf, ++ struct channel_info *info) +{ -+ u32 reg; -+ unsigned int tx_pin; + u16 eeprom; + -+ tx_pin = 0; -+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1); -+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1); -+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1); -+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1); -+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1); -+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1); -+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1); -+ + rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset); + + /* + * Determine antenna settings from EEPROM + */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); -+ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1) { ++ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1) + rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1); -+ /* Turn off unused PA or LNA when only 1T or 1R */ -+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 0); -+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 0); -+ } + + if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) == 1) { + rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1); + rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1); -+ /* Turn off unused PA or LNA when only 1T or 1R */ -+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 0); -+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 0); + } else if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) == 2) + rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1); + @@ -728,15 +769,11 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + + rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A, + TXPOWER_A_TO_DEV(info->tx_power2)); -+ -+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, 1); + } else { + rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G, + TXPOWER_G_TO_DEV(info->tx_power1)); + rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G, + TXPOWER_G_TO_DEV(info->tx_power2)); -+ -+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, 1); + } + + rt2x00_set_field32(&rf->rf4, RF4_BW40, @@ -760,6 +797,81 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + rt2800usb_rf_write(rt2x00dev, 2, rf->rf2); + rt2800usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); + rt2800usb_rf_write(rt2x00dev, 4, rf->rf4); ++} ++ ++static void rt2800usb_config_channel_rt3x(struct rt2x00_dev *rt2x00dev, ++ struct rf_channel *rf, ++ struct channel_info *info) ++{ ++ u8 rfcsr; ++ ++ rt2800usb_rfcsr_write(rt2x00dev, 2, rf->rf1); ++ rt2800usb_rfcsr_write(rt2x00dev, 2, rf->rf3); ++ ++ rt2800usb_rfcsr_read(rt2x00dev, 6, &rfcsr); ++ rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2); ++ rt2800usb_rfcsr_write(rt2x00dev, 6, rfcsr); ++ ++ rt2800usb_rfcsr_read(rt2x00dev, 12, &rfcsr); ++ rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER, ++ TXPOWER_G_TO_DEV(info->tx_power1)); ++ rt2800usb_rfcsr_write(rt2x00dev, 12, rfcsr); ++ ++ rt2800usb_rfcsr_read(rt2x00dev, 23, &rfcsr); ++ rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset); ++ rt2800usb_rfcsr_write(rt2x00dev, 23, rfcsr); ++ ++ if (test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)) ++ rt2800usb_rfcsr_write(rt2x00dev, 24, rt2x00dev->calibration_bw40); ++ else ++ rt2800usb_rfcsr_write(rt2x00dev, 24, rt2x00dev->calibration_bw20); ++ ++ rt2800usb_rfcsr_read(rt2x00dev, 23, &rfcsr); ++ rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1); ++ rt2800usb_rfcsr_write(rt2x00dev, 23, rfcsr); ++} ++ ++static void rt2800usb_config_channel(struct rt2x00_dev *rt2x00dev, ++ struct rf_channel *rf, ++ struct channel_info *info) ++{ ++ u32 reg; ++ unsigned int tx_pin; ++ u16 eeprom; ++ ++ if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION) ++ rt2800usb_config_channel_rt2x(rt2x00dev, rf, info); ++ else ++ rt2800usb_config_channel_rt3x(rt2x00dev, rf, info); ++ ++ tx_pin = 0; ++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1); ++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1); ++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1); ++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1); ++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1); ++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1); ++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1); ++ ++ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); ++ ++ /* Turn off unused PA or LNA when only 1T or 1R */ ++ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1) { ++ ++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 0); ++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 0); ++ } ++ ++ /* Turn off unused PA or LNA when only 1T or 1R */ ++ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) == 1) { ++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 0); ++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 0); ++ } ++ ++ if (rf->channel > 14) ++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, 1); ++ else ++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, 1); + + /* + * Change BBP settings @@ -892,6 +1004,36 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg); +} + ++static void rt2800usb_config_ps(struct rt2x00_dev *rt2x00dev, ++ struct rt2x00lib_conf *libconf) ++{ ++ enum dev_state state = ++ (libconf->conf->flags & IEEE80211_CONF_PS) ? ++ STATE_SLEEP : STATE_AWAKE; ++ u32 reg; ++ ++ if (state == STATE_SLEEP) { ++ rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0); ++ ++ rt2x00usb_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®); ++ rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5); ++ rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, ++ libconf->conf->listen_interval - 1); ++ rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 1); ++ rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg); ++ ++ rt2800usb_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 0); ++ } else { ++ rt2800usb_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0); ++ ++ rt2x00usb_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®); ++ rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0); ++ rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0); ++ rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 0); ++ rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg); ++ } ++} ++ +static void rt2800usb_config(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf, + const unsigned int flags) @@ -908,6 +1050,8 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + rt2800usb_config_retry_limit(rt2x00dev, libconf); + if (flags & IEEE80211_CONF_CHANGE_BEACON_INTERVAL) + rt2800usb_config_duration(rt2x00dev, libconf); ++ if (flags & IEEE80211_CONF_CHANGE_PS) ++ rt2800usb_config_ps(rt2x00dev, libconf); +} + +/* @@ -933,8 +1077,12 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + +static u8 rt2800usb_get_default_vgc(struct rt2x00_dev *rt2x00dev) +{ -+ if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) -+ return 0x2e + rt2x00dev->lna_gain; ++ if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) { ++ if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) ++ return 0x1c + (2 * rt2x00dev->lna_gain); ++ else ++ return 0x2e + rt2x00dev->lna_gain; ++ } + + if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)) + return 0x32 + (rt2x00dev->lna_gain * 5) / 3; @@ -962,7 +1110,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> +static void rt2800usb_link_tuner(struct rt2x00_dev *rt2x00dev, + struct link_qual *qual, const u32 count) +{ -+ if (rt2x00_rev(&rt2x00dev->chip) == RT2870_VERSION_C) ++ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) + return; + + /* @@ -1012,6 +1160,38 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + unsigned int i; + int status; + u32 reg; ++ u32 offset; ++ u32 length; ++ u16 chipset = (rt2x00_rev(&rt2x00dev->chip) >> 16) & 0xffff; ++ ++ /* ++ * Firmware files: ++ * There are 2 variations of the rt2870 firmware. ++ * a) size: 4kb ++ * b) size: 8kb ++ * Note that (b) contains 2 seperate firmware blobs of 4k ++ * within the file. The first blob is the same firmware as (a), ++ * but the second blob is for the additional chipsets. ++ */ ++ if (len != 4096 && len != 8192) { ++ ERROR(rt2x00dev, "Invalid firmware file length (len=%zu)\n", len); ++ return -ENOENT; ++ } ++ ++ if ((chipset == 0x2860) || (chipset == 0x2872) || (chipset == 0x3070)) { ++ offset = 0; ++ length = 4096; ++ } else if (len == 8192) { ++ offset = 4096; ++ length = 4096; ++ } else { ++ ERROR(rt2x00dev, ++ "Current firmware does not support detected chipset %04x.\n", ++ chipset); ++ ERROR(rt2x00dev, ++ "Please upgrade to a more recent firmware version.\n"); ++ return -ENOENT; ++ } + + /* + * Wait for stable hardware. @@ -1034,8 +1214,8 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE, + USB_VENDOR_REQUEST_OUT, + FIRMWARE_IMAGE_BASE, -+ data, len, -+ REGISTER_TIMEOUT32(len)); ++ data + offset, length, ++ REGISTER_TIMEOUT32(length)); + + rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0); + rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0); @@ -1143,8 +1323,14 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + rt2x00_set_field32(®, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0); + rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg); + -+ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00040a06); -+ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606); ++ if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) { ++ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400); ++ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000); ++ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000); ++ } else { ++ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00040a06); ++ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606); ++ } + + rt2x00usb_register_read(rt2x00dev, TX_LINK_CFG, ®); + rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFB_LIFETIME, 32); @@ -1164,7 +1350,11 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + + rt2x00usb_register_read(rt2x00dev, MAX_LEN_CFG, ®); + rt2x00_set_field32(®, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE); -+ rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 1); ++ if (rt2x00_rev(&rt2x00dev->chip) >= RT2880E_VERSION && ++ rt2x00_rev(&rt2x00dev->chip) < RT3070_VERSION) ++ rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 2); ++ else ++ rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 1); + rt2x00_set_field32(®, MAX_LEN_CFG_MIN_PSDU, 0); + rt2x00_set_field32(®, MAX_LEN_CFG_MIN_MPDU, 0); + rt2x00usb_register_write(rt2x00dev, MAX_LEN_CFG, reg); @@ -1280,7 +1470,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + * ASIC will keep garbage value after boot, clear encryption keys. + */ + for (i = 0; i < 254; i++) { -+ u32 wcid[2] = { 0xffffffff, 0x0000ffff }; ++ u32 wcid[2] = { 0xffffffff, 0x00ffffff }; + rt2x00usb_register_multiwrite(rt2x00dev, MAC_WCID_ENTRY(i), + wcid, sizeof(wcid)); + } @@ -1422,15 +1612,19 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + rt2800usb_bbp_write(rt2x00dev, 86, 0x00); + rt2800usb_bbp_write(rt2x00dev, 91, 0x04); + rt2800usb_bbp_write(rt2x00dev, 92, 0x00); ++ rt2800usb_bbp_write(rt2x00dev, 103, 0x00); + rt2800usb_bbp_write(rt2x00dev, 105, 0x05); + -+ if (rt2x00_rev(&rt2x00dev->chip) == RT2870_VERSION_C) { ++ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) { + rt2800usb_bbp_write(rt2x00dev, 69, 0x16); + rt2800usb_bbp_write(rt2x00dev, 73, 0x12); + } + -+ if (rt2x00_rev(&rt2x00dev->chip) != RT2870_VERSION_D) -+ rt2800usb_bbp_write(rt2x00dev, 84, 0x19); ++ if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) { ++ rt2800usb_bbp_write(rt2x00dev, 70, 0x0a); ++ rt2800usb_bbp_write(rt2x00dev, 84, 0x99); ++ rt2800usb_bbp_write(rt2x00dev, 105, 0x05); ++ } + + for (i = 0; i < EEPROM_BBP_SIZE; i++) { + rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); @@ -1445,6 +1639,134 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + return 0; +} + ++static u8 rt2800usb_init_rx_filter(struct rt2x00_dev *rt2x00dev, ++ bool bw40, u8 rfcsr24, u8 filter_target) ++{ ++ unsigned int i; ++ u8 bbp; ++ u8 rfcsr; ++ u8 passband; ++ u8 stopband; ++ u8 overtuned = 0; ++ ++ rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24); ++ ++ if (bw40) { ++ rt2800usb_bbp_read(rt2x00dev, 4, &bbp); ++ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0x10); ++ rt2800usb_bbp_write(rt2x00dev, 4, bbp); ++ } ++ ++ rt2800usb_rfcsr_read(rt2x00dev, 22, &rfcsr); ++ rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1); ++ rt2800usb_rfcsr_write(rt2x00dev, 22, rfcsr); ++ ++ /* ++ * Set power & frequency of passband test tone ++ */ ++ rt2800usb_bbp_write(rt2x00dev, 24, 0); ++ ++ for (i = 0; i < 100; i++) { ++ rt2800usb_bbp_write(rt2x00dev, 25, 0x90); ++ msleep(1); ++ ++ rt2800usb_bbp_read(rt2x00dev, 55, &passband); ++ if (passband) ++ break; ++ } ++ ++ /* ++ * Set power & frequency of stopband test tone ++ */ ++ rt2800usb_bbp_write(rt2x00dev, 24, 0x06); ++ ++ for (i = 0; i < 100; i++) { ++ rt2800usb_bbp_write(rt2x00dev, 25, 0x90); ++ msleep(1); ++ ++ rt2800usb_bbp_read(rt2x00dev, 55, &stopband); ++ ++ if ((passband - stopband) <= filter_target) { ++ rfcsr24++; ++ overtuned += ((passband - stopband) == filter_target); ++ } else ++ break; ++ ++ rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24); ++ } ++ ++ rfcsr24 -= !!overtuned; ++ ++ rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24); ++ return rfcsr24; ++} ++ ++static int rt2800usb_init_rfcsr(struct rt2x00_dev *rt2x00dev) ++{ ++ u8 rfcsr; ++ u8 bbp; ++ ++ if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION) ++ return 0; ++ ++ /* ++ * Init RF calibration. ++ */ ++ rt2800usb_rfcsr_read(rt2x00dev, 30, &rfcsr); ++ rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1); ++ rt2800usb_rfcsr_write(rt2x00dev, 30, rfcsr); ++ msleep(1); ++ rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0); ++ rt2800usb_rfcsr_write(rt2x00dev, 30, rfcsr); ++ ++ rt2800usb_rfcsr_write(rt2x00dev, 4, 0x40); ++ rt2800usb_rfcsr_write(rt2x00dev, 5, 0x03); ++ rt2800usb_rfcsr_write(rt2x00dev, 6, 0x02); ++ rt2800usb_rfcsr_write(rt2x00dev, 7, 0x70); ++ rt2800usb_rfcsr_write(rt2x00dev, 9, 0x0f); ++ rt2800usb_rfcsr_write(rt2x00dev, 10, 0x71); ++ rt2800usb_rfcsr_write(rt2x00dev, 11, 0x21); ++ rt2800usb_rfcsr_write(rt2x00dev, 12, 0x7b); ++ rt2800usb_rfcsr_write(rt2x00dev, 14, 0x90); ++ rt2800usb_rfcsr_write(rt2x00dev, 15, 0x58); ++ rt2800usb_rfcsr_write(rt2x00dev, 16, 0xb3); ++ rt2800usb_rfcsr_write(rt2x00dev, 17, 0x92); ++ rt2800usb_rfcsr_write(rt2x00dev, 18, 0x2c); ++ rt2800usb_rfcsr_write(rt2x00dev, 19, 0x02); ++ rt2800usb_rfcsr_write(rt2x00dev, 20, 0xba); ++ rt2800usb_rfcsr_write(rt2x00dev, 21, 0xdb); ++ rt2800usb_rfcsr_write(rt2x00dev, 24, 0x16); ++ rt2800usb_rfcsr_write(rt2x00dev, 25, 0x01); ++ rt2800usb_rfcsr_write(rt2x00dev, 27, 0x03); ++ rt2800usb_rfcsr_write(rt2x00dev, 29, 0x1f); ++ ++ /* ++ * Set RX Filter calibration for 20MHz and 40MHz ++ */ ++ rt2x00dev->calibration_bw20 = ++ rt2800usb_init_rx_filter(rt2x00dev, false, 0x07, 0x16); ++ rt2x00dev->calibration_bw40 = ++ rt2800usb_init_rx_filter(rt2x00dev, true, 0x27, 0x19); ++ ++ /* ++ * Set back to initial state ++ */ ++ rt2800usb_bbp_write(rt2x00dev, 24, 0); ++ ++ rt2800usb_rfcsr_read(rt2x00dev, 22, &rfcsr); ++ rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0); ++ rt2800usb_rfcsr_write(rt2x00dev, 22, rfcsr); ++ ++ /* ++ * set BBP back to BW20 ++ */ ++ rt2800usb_bbp_read(rt2x00dev, 4, &bbp); ++ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0); ++ rt2800usb_bbp_write(rt2x00dev, 4, bbp); ++ ++ return 0; ++} ++ +/* + * Device state switch handlers. + */ @@ -1488,7 +1810,8 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + */ + if (unlikely(rt2800usb_wait_wpdma_ready(rt2x00dev) || + rt2800usb_init_registers(rt2x00dev) || -+ rt2800usb_init_bbp(rt2x00dev))) ++ rt2800usb_init_bbp(rt2x00dev) || ++ rt2800usb_init_rfcsr(rt2x00dev))) + return -EIO; + + rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, ®); @@ -1636,8 +1959,8 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + struct txentry_desc *txdesc) +{ + struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); -+ __le32 *txd = skbdesc->desc; -+ __le32 *txwi = txd + TXD_DESC_SIZE; ++ __le32 *txi = skbdesc->desc; ++ __le32 *txwi = txi + TXINFO_DESC_SIZE; + u32 word; + + /* @@ -1684,31 +2007,16 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + /* + * Initialize TX descriptor + */ -+ rt2x00_desc_read(txd, 0, &word); -+ rt2x00_set_field32(&word, TXD_W0_SD_PTR0, skbdesc->skb_dma); -+ rt2x00_desc_write(txd, 0, word); -+ -+ rt2x00_desc_read(txd, 1, &word); -+ rt2x00_set_field32(&word, TXD_W1_SD_LEN1, skb->len); -+ rt2x00_set_field32(&word, TXD_W1_LAST_SEC1, 1); -+ rt2x00_set_field32(&word, TXD_W1_BURST, ++ rt2x00_desc_read(txi, 0, &word); ++ rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_PKT_LEN, ++ roundup(skb->len + TXWI_DESC_SIZE, 4)); ++ rt2x00_set_field32(&word, TXINFO_W0_WIV, 1); ++ rt2x00_set_field32(&word, TXINFO_W0_QSEL, 2); ++ rt2x00_set_field32(&word, TXINFO_W0_SW_USE_LAST_ROUND, 0); ++ rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_NEXT_VALID, 0); ++ rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_BURST, + test_bit(ENTRY_TXD_BURST, &txdesc->flags)); -+ rt2x00_set_field32(&word, TXD_W1_SD_LEN0, -+ rt2x00dev->hw->extra_tx_headroom); -+ rt2x00_set_field32(&word, TXD_W1_LAST_SEC0, -+ !test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags)); -+ rt2x00_set_field32(&word, TXD_W1_DMA_DONE, 0); -+ rt2x00_desc_write(txd, 1, word); -+ -+ rt2x00_desc_read(txd, 2, &word); -+ rt2x00_set_field32(&word, TXD_W2_SD_PTR1, -+ skbdesc->skb_dma + rt2x00dev->hw->extra_tx_headroom); -+ rt2x00_desc_write(txd, 2, word); -+ -+ rt2x00_desc_read(txd, 3, &word); -+ rt2x00_set_field32(&word, TXD_W3_WIV, 1); -+ rt2x00_set_field32(&word, TXD_W3_QSEL, 2); -+ rt2x00_desc_write(txd, 3, word); ++ rt2x00_desc_write(txi, 0, word); +} + +/* @@ -1882,9 +2190,9 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + rxdesc->size = rt2x00_get_field32(rxwi0, RXWI_W0_MPDU_TOTAL_BYTE_COUNT); + + /* -+ * Remove TXWI descriptor from start of buffer. ++ * Remove RXWI descriptor from start of buffer. + */ -+ skb_pull(entry->skb, TXWI_DESC_SIZE + skbdesc->desc_len); ++ skb_pull(entry->skb, RXWI_DESC_SIZE + skbdesc->desc_len); + skb_trim(entry->skb, rxdesc->size); +} + @@ -1920,9 +2228,17 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + } + + rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word); -+ if (word != 0) { -+ /* NIC configuration must always be 0. */ -+ word = 0; ++ if (word == 0xffff) { ++ rt2x00_set_field16(&word, EEPROM_NIC_HW_RADIO, 0); ++ rt2x00_set_field16(&word, EEPROM_NIC_DYNAMIC_TX_AGC, 0); ++ rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_BG, 0); ++ rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_A, 0); ++ rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0); ++ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_BG, 0); ++ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_A, 0); ++ rt2x00_set_field16(&word, EEPROM_NIC_WPS_PBC, 0); ++ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_BG, 0); ++ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_A, 0); + rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word); + EEPROM(rt2x00dev, "NIC: 0x%04x\n", word); + } @@ -1986,7 +2302,6 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> +static int rt2800usb_init_eeprom(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; -+ u16 rev; + u16 value; + u16 eeprom; + @@ -2000,8 +2315,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + */ + value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); + rt2x00usb_register_read(rt2x00dev, MAC_CSR0, ®); -+ rev = rt2x00_get_field32(reg, MAC_CSR0_ASIC_REV); -+ rt2x00_set_chip(rt2x00dev, RT2870, value, rev); ++ rt2x00_set_chip(rt2x00dev, RT2870, value, reg); + + /* + * The check for rt2860 is not a typo, some rt2870 hardware @@ -2016,7 +2330,9 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + if (!rt2x00_rf(&rt2x00dev->chip, RF2820) && + !rt2x00_rf(&rt2x00dev->chip, RF2850) && + !rt2x00_rf(&rt2x00dev->chip, RF2720) && -+ !rt2x00_rf(&rt2x00dev->chip, RF2750)) { ++ !rt2x00_rf(&rt2x00dev->chip, RF2750) && ++ !rt2x00_rf(&rt2x00dev->chip, RF3020) && ++ !rt2x00_rf(&rt2x00dev->chip, RF2020)) { + ERROR(rt2x00dev, "Invalid RF chipset detected.\n"); + return -ENODEV; + } @@ -2131,6 +2447,27 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + { 216, 0x15002ccc, 0x15004982, 0x1509be55, 0x150c0a23 }, +}; + ++/* ++ * RF value list for rt3070 ++ * Supports: 2.4 GHz ++ */ ++static const struct rf_channel rf_vals_3070[] = { ++ {1, 241, 2, 2 }, ++ {2, 241, 2, 7 }, ++ {3, 242, 2, 2 }, ++ {4, 242, 2, 7 }, ++ {5, 243, 2, 2 }, ++ {6, 243, 2, 7 }, ++ {7, 244, 2, 2 }, ++ {8, 244, 2, 7 }, ++ {9, 245, 2, 2 }, ++ {10, 245, 2, 7 }, ++ {11, 246, 2, 2 }, ++ {12, 246, 2, 7 }, ++ {13, 247, 2, 2 }, ++ {14, 248, 2, 4 }, ++}; ++ +static int rt2800usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) +{ + struct hw_mode_spec *spec = &rt2x00dev->spec; @@ -2144,8 +2481,10 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + */ + rt2x00dev->hw->flags = + IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | -+ IEEE80211_HW_SIGNAL_DBM; -+ rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE + TXINFO_DESC_SIZE; ++ IEEE80211_HW_SIGNAL_DBM | ++ IEEE80211_HW_SUPPORTS_PS | ++ IEEE80211_HW_PS_NULLFUNC_STACK; ++ rt2x00dev->hw->extra_tx_headroom = TXINFO_DESC_SIZE + TXWI_DESC_SIZE; + + SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); + SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, @@ -2186,6 +2525,10 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + spec->supported_bands |= SUPPORT_BAND_5GHZ; + spec->num_channels = ARRAY_SIZE(rf_vals); + spec->channels = rf_vals; ++ } else if (rt2x00_rf(&rt2x00dev->chip, RF3020) || ++ rt2x00_rf(&rt2x00dev->chip, RF2020)) { ++ spec->num_channels = ARRAY_SIZE(rf_vals_3070); ++ spec->channels = rf_vals_3070; + } + + /* @@ -2263,33 +2606,34 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + u32 reg; ++ bool enabled = (value < IEEE80211_MAX_RTS_THRESHOLD); + + rt2x00usb_register_read(rt2x00dev, TX_RTS_CFG, ®); + rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES, value); + rt2x00usb_register_write(rt2x00dev, TX_RTS_CFG, reg); + + rt2x00usb_register_read(rt2x00dev, CCK_PROT_CFG, ®); -+ rt2x00_set_field32(®, CCK_PROT_CFG_RTS_TH_EN, 1); ++ rt2x00_set_field32(®, CCK_PROT_CFG_RTS_TH_EN, enabled); + rt2x00usb_register_write(rt2x00dev, CCK_PROT_CFG, reg); + + rt2x00usb_register_read(rt2x00dev, OFDM_PROT_CFG, ®); -+ rt2x00_set_field32(®, OFDM_PROT_CFG_RTS_TH_EN, 1); ++ rt2x00_set_field32(®, OFDM_PROT_CFG_RTS_TH_EN, enabled); + rt2x00usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg); + + rt2x00usb_register_read(rt2x00dev, MM20_PROT_CFG, ®); -+ rt2x00_set_field32(®, MM20_PROT_CFG_RTS_TH_EN, 1); ++ rt2x00_set_field32(®, MM20_PROT_CFG_RTS_TH_EN, enabled); + rt2x00usb_register_write(rt2x00dev, MM20_PROT_CFG, reg); + + rt2x00usb_register_read(rt2x00dev, MM40_PROT_CFG, ®); -+ rt2x00_set_field32(®, MM40_PROT_CFG_RTS_TH_EN, 1); ++ rt2x00_set_field32(®, MM40_PROT_CFG_RTS_TH_EN, enabled); + rt2x00usb_register_write(rt2x00dev, MM40_PROT_CFG, reg); + + rt2x00usb_register_read(rt2x00dev, GF20_PROT_CFG, ®); -+ rt2x00_set_field32(®, GF20_PROT_CFG_RTS_TH_EN, 1); ++ rt2x00_set_field32(®, GF20_PROT_CFG_RTS_TH_EN, enabled); + rt2x00usb_register_write(rt2x00dev, GF20_PROT_CFG, reg); + + rt2x00usb_register_read(rt2x00dev, GF40_PROT_CFG, ®); -+ rt2x00_set_field32(®, GF40_PROT_CFG_RTS_TH_EN, 1); ++ rt2x00_set_field32(®, GF40_PROT_CFG_RTS_TH_EN, enabled); + rt2x00usb_register_write(rt2x00dev, GF40_PROT_CFG, reg); + + return 0; @@ -2315,24 +2659,23 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + if (retval) + return retval; + ++ /* ++ * We only need to perform additional register initialization ++ * for WMM queues/ ++ */ ++ if (queue_idx >= 4) ++ return 0; ++ + queue = rt2x00queue_get_queue(rt2x00dev, queue_idx); + + /* Update WMM TXOP register */ -+ if (queue_idx < 2) { -+ field.bit_offset = queue_idx * 16; -+ field.bit_mask = 0xffff << field.bit_offset; -+ -+ rt2x00usb_register_read(rt2x00dev, WMM_TXOP0_CFG, ®); -+ rt2x00_set_field32(®, field, queue->txop); -+ rt2x00usb_register_write(rt2x00dev, WMM_TXOP0_CFG, reg); -+ } else if (queue_idx < 4) { -+ field.bit_offset = (queue_idx - 2) * 16; -+ field.bit_mask = 0xffff << field.bit_offset; -+ -+ rt2x00usb_register_read(rt2x00dev, WMM_TXOP1_CFG, ®); -+ rt2x00_set_field32(®, field, queue->txop); -+ rt2x00usb_register_write(rt2x00dev, WMM_TXOP1_CFG, reg); -+ } ++ offset = WMM_TXOP0_CFG + (sizeof(u32) * (!!(queue_idx & 2))); ++ field.bit_offset = (queue_idx & 1) * 16; ++ field.bit_mask = 0xffff << field.bit_offset; ++ ++ rt2x00usb_register_read(rt2x00dev, offset, ®); ++ rt2x00_set_field32(®, field, queue->txop); ++ rt2x00usb_register_write(rt2x00dev, offset, reg); + + /* Update WMM registers */ + field.bit_offset = queue_idx * 4; @@ -2351,15 +2694,14 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + rt2x00usb_register_write(rt2x00dev, WMM_CWMAX_CFG, reg); + + /* Update EDCA registers */ -+ if (queue_idx < 4) { -+ offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx); -+ -+ rt2x00usb_register_read(rt2x00dev, offset, ®); -+ rt2x00_set_field32(®, EDCA_AC0_CFG_AIFSN, queue->aifs); -+ rt2x00_set_field32(®, EDCA_AC0_CFG_CWMIN, queue->cw_min); -+ rt2x00_set_field32(®, EDCA_AC0_CFG_CWMAX, queue->cw_max); -+ rt2x00usb_register_write(rt2x00dev, offset, reg); -+ } ++ offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx); ++ ++ rt2x00usb_register_read(rt2x00dev, offset, ®); ++ rt2x00_set_field32(®, EDCA_AC0_CFG_TX_OP, queue->txop); ++ rt2x00_set_field32(®, EDCA_AC0_CFG_AIFSN, queue->aifs); ++ rt2x00_set_field32(®, EDCA_AC0_CFG_CWMIN, queue->cw_min); ++ rt2x00_set_field32(®, EDCA_AC0_CFG_CWMAX, queue->cw_max); ++ rt2x00usb_register_write(rt2x00dev, offset, reg); + + return 0; +} @@ -2444,14 +2786,14 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> +static const struct data_queue_desc rt2800usb_queue_tx = { + .entry_num = TX_ENTRIES, + .data_size = DATA_FRAME_SIZE, -+ .desc_size = TXD_DESC_SIZE, ++ .desc_size = TXINFO_DESC_SIZE + TXWI_DESC_SIZE, + .priv_size = sizeof(struct queue_entry_priv_usb), +}; + +static const struct data_queue_desc rt2800usb_queue_bcn = { + .entry_num = 8 * BEACON_ENTRIES, + .data_size = MGMT_FRAME_SIZE, -+ .desc_size = TXWI_DESC_SIZE, ++ .desc_size = TXINFO_DESC_SIZE + TXWI_DESC_SIZE, + .priv_size = sizeof(struct queue_entry_priv_usb), +}; + @@ -2476,6 +2818,12 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + * rt2800usb module information. + */ +static struct usb_device_id rt2800usb_device_table[] = { ++ /* Abocom */ ++ { USB_DEVICE(0x07b8, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) }, ++ { USB_DEVICE(0x07b8, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) }, ++ { USB_DEVICE(0x07b8, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) }, ++ { USB_DEVICE(0x07b8, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) }, ++ { USB_DEVICE(0x1482, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Amit */ + { USB_DEVICE(0x15c5, 0x0008), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* ASUS */ @@ -2486,9 +2834,12 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + { USB_DEVICE(0x13d3, 0x3247), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Belkin */ + { USB_DEVICE(0x050d, 0x8053), USB_DEVICE_DATA(&rt2800usb_ops) }, ++ { USB_DEVICE(0x050d, 0x805c), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Conceptronic */ + { USB_DEVICE(0x14b2, 0x3c06), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x14b2, 0x3c07), USB_DEVICE_DATA(&rt2800usb_ops) }, ++ { USB_DEVICE(0x14b2, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) }, ++ { USB_DEVICE(0x14b2, 0x3c12), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x14b2, 0x3c23), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x14b2, 0x3c25), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x14b2, 0x3c27), USB_DEVICE_DATA(&rt2800usb_ops) }, @@ -2497,9 +2848,12 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + { USB_DEVICE(0x07aa, 0x002f), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x07aa, 0x003c), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x07aa, 0x003f), USB_DEVICE_DATA(&rt2800usb_ops) }, ++ { USB_DEVICE(0x18c5, 0x0012), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* D-Link */ + { USB_DEVICE(0x07d1, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x07d1, 0x3c11), USB_DEVICE_DATA(&rt2800usb_ops) }, ++ /* Edimax */ ++ { USB_DEVICE(0x7392, 0x7711), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* EnGenius */ + { USB_DEVICE(0X1740, 0x9701), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x1740, 0x9702), USB_DEVICE_DATA(&rt2800usb_ops) }, @@ -2510,13 +2864,21 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + { USB_DEVICE(0x0e66, 0x0003), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Linksys */ + { USB_DEVICE(0x1737, 0x0071), USB_DEVICE_DATA(&rt2800usb_ops) }, ++ /* Logitec */ ++ { USB_DEVICE(0x0789, 0x0162), USB_DEVICE_DATA(&rt2800usb_ops) }, ++ { USB_DEVICE(0x0789, 0x0163), USB_DEVICE_DATA(&rt2800usb_ops) }, ++ { USB_DEVICE(0x0789, 0x0164), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Philips */ + { USB_DEVICE(0x0471, 0x200f), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Planex */ + { USB_DEVICE(0x2019, 0xed06), USB_DEVICE_DATA(&rt2800usb_ops) }, ++ { USB_DEVICE(0x2019, 0xab25), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Ralink */ + { USB_DEVICE(0x148f, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x148f, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) }, ++ { USB_DEVICE(0x148f, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) }, ++ /* Samsung */ ++ { USB_DEVICE(0x04e8, 0x2018), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Siemens */ + { USB_DEVICE(0x129b, 0x1828), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Sitecom */ @@ -2536,6 +2898,9 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + /* ZCOM */ + { USB_DEVICE(0x0cde, 0x0022), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0cde, 0x0025), USB_DEVICE_DATA(&rt2800usb_ops) }, ++ /* Zinwell */ ++ { USB_DEVICE(0x5a57, 0x0280), USB_DEVICE_DATA(&rt2800usb_ops) }, ++ { USB_DEVICE(0x5a57, 0x0282), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Zyxel */ + { USB_DEVICE(0x0586, 0x3416), USB_DEVICE_DATA(&rt2800usb_ops) }, + { 0, } @@ -2572,9 +2937,9 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> +module_exit(rt2800usb_exit); --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2800usb.h -@@ -0,0 +1,1892 @@ +@@ -0,0 +1,1944 @@ +/* -+ Copyright (C) 2004 - 2008 rt2x00 SourceForge Project ++ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + <http://rt2x00.serialmonkey.com> + + This program is free software; you can redistribute it and/or modify @@ -2622,9 +2987,11 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> +/* + * RT2870 version + */ -+#define RT2870_VERSION_C 0x0100 -+#define RT2870_VERSION_D 0x0101 -+#define RT2870_VERSION_E 0x0200 ++#define RT2860C_VERSION 0x28600100 ++#define RT2860D_VERSION 0x28600101 ++#define RT2880E_VERSION 0x28720200 ++#define RT2883_VERSION 0x28830300 ++#define RT3070_VERSION 0x30700200 + +/* + * Signal information. @@ -2958,6 +3325,15 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> +#define PBF_DBG 0x043c + +/* ++ * RF registers ++ */ ++#define RF_CSR_CFG 0x0500 ++#define RF_CSR_CFG_DATA FIELD32(0x000000ff) ++#define RF_CSR_CFG_REGNUM FIELD32(0x00001f00) ++#define RF_CSR_CFG_WRITE FIELD32(0x00010000) ++#define RF_CSR_CFG_BUSY FIELD32(0x00020000) ++ ++/* + * MAC Control/Status Registers(CSR). + * Some values are set in TU, whereas 1 TU == 1024 us. + */ @@ -3245,7 +3621,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + * EDCA_AC0_CFG: + */ +#define EDCA_AC0_CFG 0x1300 -+#define EDCA_AC0_CFG_AC_TX_OP FIELD32(0x000000ff) ++#define EDCA_AC0_CFG_TX_OP FIELD32(0x000000ff) +#define EDCA_AC0_CFG_AIFSN FIELD32(0x00000f00) +#define EDCA_AC0_CFG_CWMIN FIELD32(0x0000f000) +#define EDCA_AC0_CFG_CWMAX FIELD32(0x000f0000) @@ -3254,7 +3630,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + * EDCA_AC1_CFG: + */ +#define EDCA_AC1_CFG 0x1304 -+#define EDCA_AC1_CFG_AC_TX_OP FIELD32(0x000000ff) ++#define EDCA_AC1_CFG_TX_OP FIELD32(0x000000ff) +#define EDCA_AC1_CFG_AIFSN FIELD32(0x00000f00) +#define EDCA_AC1_CFG_CWMIN FIELD32(0x0000f000) +#define EDCA_AC1_CFG_CWMAX FIELD32(0x000f0000) @@ -3263,7 +3639,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + * EDCA_AC2_CFG: + */ +#define EDCA_AC2_CFG 0x1308 -+#define EDCA_AC2_CFG_AC_TX_OP FIELD32(0x000000ff) ++#define EDCA_AC2_CFG_TX_OP FIELD32(0x000000ff) +#define EDCA_AC2_CFG_AIFSN FIELD32(0x00000f00) +#define EDCA_AC2_CFG_CWMIN FIELD32(0x0000f000) +#define EDCA_AC2_CFG_CWMAX FIELD32(0x000f0000) @@ -3272,7 +3648,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + * EDCA_AC3_CFG: + */ +#define EDCA_AC3_CFG 0x130c -+#define EDCA_AC3_CFG_AC_TX_OP FIELD32(0x000000ff) ++#define EDCA_AC3_CFG_TX_OP FIELD32(0x000000ff) +#define EDCA_AC3_CFG_AIFSN FIELD32(0x00000f00) +#define EDCA_AC3_CFG_CWMIN FIELD32(0x0000f000) +#define EDCA_AC3_CFG_CWMAX FIELD32(0x000f0000) @@ -4057,6 +4433,46 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> +#define BBP3_RX_ANTENNA FIELD8(0x18) + +/* ++ * BBP 4: Bandwidth ++ */ ++#define BBP4_BANDWIDTH FIELD8(0x18) ++ ++/* ++ * RFCSR registers ++ * The wordsize of the RFCSR is 8 bits. ++ */ ++ ++/* ++ * RFCSR 6: ++ */ ++#define RFCSR6_R FIELD8(0x03) ++ ++/* ++ * RFCSR 7: ++ */ ++#define RFCSR7_RF_TUNING FIELD8(0x01) ++ ++/* ++ * RFCSR 12: ++ */ ++#define RFCSR12_TX_POWER FIELD8(0x1f) ++ ++/* ++ * RFCSR 22: ++ */ ++#define RFCSR22_BASEBAND_LOOPBACK FIELD8(0x01) ++ ++/* ++ * RFCSR 23: ++ */ ++#define RFCSR23_FREQ_OFFSET FIELD8(0x7f) ++ ++/* ++ * RFCSR 30: ++ */ ++#define RFCSR30_RF_CALIBRATION FIELD8(0x80) ++ ++/* + * RF registers + */ + @@ -4319,6 +4735,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> +#define TXINFO_W0_USB_DMA_TX_PKT_LEN FIELD32(0x0000ffff) +#define TXINFO_W0_WIV FIELD32(0x01000000) +#define TXINFO_W0_QSEL FIELD32(0x06000000) ++#define TXINFO_W0_SW_USE_LAST_ROUND FIELD32(0x08000000) +#define TXINFO_W0_USB_DMA_NEXT_VALID FIELD32(0x40000000) +#define TXINFO_W0_USB_DMA_TX_BURST FIELD32(0x80000000) + @@ -4475,3 +4892,16 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> u16 rf; u32 rev; +@@ -778,6 +779,12 @@ struct rt2x00_dev { + u8 freq_offset; + + /* ++ * Calibration information (for rt2800usb). ++ */ ++ u8 calibration_bw20; ++ u8 calibration_bw40; ++ ++ /* + * Low level statistics which will have + * to be kept up to date while device is running. + */ diff --git a/package/mac80211/patches/305-rt2x00-Update-rt2x00ht.patch b/package/mac80211/patches/305-rt2x00-Update-rt2x00ht.patch deleted file mode 100644 index 24a5572..0000000 --- a/package/mac80211/patches/305-rt2x00-Update-rt2x00ht.patch +++ /dev/null @@ -1,19 +0,0 @@ -From 8447ae720ac565d9c521e0c295705179d8876959 Mon Sep 17 00:00:00 2001 -From: Ivo van Doorn <IvDoorn@gmail.com> -Date: Sat, 10 Jan 2009 14:04:34 +0100 -Subject: [PATCH] rt2x00: Update rt2x00ht - -Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> ---- - drivers/net/wireless/rt2x00/rt2x00ht.c | 2 +- - 1 files changed, 1 insertions(+), 1 deletions(-) - ---- a/drivers/net/wireless/rt2x00/rt2x00ht.c -+++ b/drivers/net/wireless/rt2x00/rt2x00ht.c -@@ -1,5 +1,5 @@ - /* -- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project -+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify diff --git a/package/mac80211/patches/306-rt2x00-Update-rt2800pci.patch b/package/mac80211/patches/306-rt2x00-Update-rt2800pci.patch deleted file mode 100644 index 00a65bc..0000000 --- a/package/mac80211/patches/306-rt2x00-Update-rt2800pci.patch +++ /dev/null @@ -1,29 +0,0 @@ -From eb419a370a4c87fae945950442e4f7609aea952c Mon Sep 17 00:00:00 2001 -From: Ivo van Doorn <IvDoorn@gmail.com> -Date: Sat, 10 Jan 2009 14:05:01 +0100 -Subject: [PATCH] rt2x00: Update rt2800pci - -Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> ---- - drivers/net/wireless/rt2x00/rt2800pci.c | 2 +- - drivers/net/wireless/rt2x00/rt2800pci.h | 2 +- - 2 files changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/net/wireless/rt2x00/rt2800pci.c -+++ b/drivers/net/wireless/rt2x00/rt2800pci.c -@@ -1,5 +1,5 @@ - /* -- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project -+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify ---- a/drivers/net/wireless/rt2x00/rt2800pci.h -+++ b/drivers/net/wireless/rt2x00/rt2800pci.h -@@ -1,5 +1,5 @@ - /* -- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project -+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify diff --git a/package/mac80211/patches/307-rt2x00-Update-rt2800usb.patch b/package/mac80211/patches/307-rt2x00-Update-rt2800usb.patch deleted file mode 100644 index 73db364..0000000 --- a/package/mac80211/patches/307-rt2x00-Update-rt2800usb.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 1d5b075d27b109fc7a6b6a67e60754e2862b2d6b Mon Sep 17 00:00:00 2001 -From: Ivo van Doorn <IvDoorn@gmail.com> -Date: Sat, 10 Jan 2009 14:05:21 +0100 -Subject: [PATCH] rt2x00: Update rt2800usb - -Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> ---- - drivers/net/wireless/rt2x00/rt2800usb.c | 2 +- - drivers/net/wireless/rt2x00/rt2800usb.h | 2 +- - 2 files changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/net/wireless/rt2x00/rt2800usb.c -+++ b/drivers/net/wireless/rt2x00/rt2800usb.c -@@ -1,5 +1,5 @@ - /* -- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project -+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify ---- a/drivers/net/wireless/rt2x00/rt2800usb.h -+++ b/drivers/net/wireless/rt2x00/rt2800usb.h -@@ -1,5 +1,5 @@ - /* -- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project -+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify diff --git a/package/mac80211/patches/308-rt2x00-Add-powersaving-support-rt2800pci.patch b/package/mac80211/patches/308-rt2x00-Add-powersaving-support-rt2800pci.patch deleted file mode 100644 index 583c2d9..0000000 --- a/package/mac80211/patches/308-rt2x00-Add-powersaving-support-rt2800pci.patch +++ /dev/null @@ -1,69 +0,0 @@ -From 059fef55f609bded8e83ec8b54729a2f500db938 Mon Sep 17 00:00:00 2001 -From: Ivo van Doorn <IvDoorn@gmail.com> -Date: Sat, 10 Jan 2009 14:29:21 +0100 -Subject: [PATCH] rt2x00: Add powersaving support (rt2800pci) - -Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> ---- - drivers/net/wireless/rt2x00/rt2800pci.c | 36 ++++++++++++++++++++++++++++++- - 1 files changed, 35 insertions(+), 1 deletions(-) - ---- a/drivers/net/wireless/rt2x00/rt2800pci.c -+++ b/drivers/net/wireless/rt2x00/rt2800pci.c -@@ -880,6 +880,36 @@ static void rt2800pci_config_duration(st - rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg); - } - -+static void rt2800pci_config_ps(struct rt2x00_dev *rt2x00dev, -+ struct rt2x00lib_conf *libconf) -+{ -+ enum dev_state state = -+ (libconf->conf->flags & IEEE80211_CONF_PS) ? -+ STATE_SLEEP : STATE_AWAKE; -+ u32 reg; -+ -+ if (state == STATE_SLEEP) { -+ rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0); -+ -+ rt2x00pci_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®); -+ rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5); -+ rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, -+ libconf->conf->listen_interval - 1); -+ rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 1); -+ rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg); -+ -+ rt2800pci_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 0); -+ } else { -+ rt2800pci_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0); -+ -+ rt2x00pci_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®); -+ rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0); -+ rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0); -+ rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 0); -+ rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg); -+ } -+} -+ - static void rt2800pci_config(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf, - const unsigned int flags) -@@ -896,6 +926,8 @@ static void rt2800pci_config(struct rt2x - rt2800pci_config_retry_limit(rt2x00dev, libconf); - if (flags & IEEE80211_CONF_CHANGE_BEACON_INTERVAL) - rt2800pci_config_duration(rt2x00dev, libconf); -+ if (flags & IEEE80211_CONF_CHANGE_PS) -+ rt2800pci_config_ps(rt2x00dev, libconf); - } - - /* -@@ -2346,7 +2378,9 @@ static int rt2800pci_probe_hw_mode(struc - */ - rt2x00dev->hw->flags = - IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | -- IEEE80211_HW_SIGNAL_DBM; -+ IEEE80211_HW_SIGNAL_DBM | -+ IEEE80211_HW_SUPPORTS_PS | -+ IEEE80211_HW_PS_NULLFUNC_STACK; - rt2x00dev->hw->extra_tx_headroom = TXWI_DESC_SIZE; - - SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); diff --git a/package/mac80211/patches/309-rt2x00-Add-powersaving-support-rt2800usb.patch b/package/mac80211/patches/309-rt2x00-Add-powersaving-support-rt2800usb.patch deleted file mode 100644 index 2b7dcc7..0000000 --- a/package/mac80211/patches/309-rt2x00-Add-powersaving-support-rt2800usb.patch +++ /dev/null @@ -1,69 +0,0 @@ -From fa9b7fc2e662e086a7c0e045e541f773bf34c555 Mon Sep 17 00:00:00 2001 -From: Ivo van Doorn <IvDoorn@gmail.com> -Date: Sat, 10 Jan 2009 14:31:00 +0100 -Subject: [PATCH] rt2x00: Add powersaving support (rt2800usb) - -Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> ---- - drivers/net/wireless/rt2x00/rt2800usb.c | 36 ++++++++++++++++++++++++++++++- - 1 files changed, 35 insertions(+), 1 deletions(-) - ---- a/drivers/net/wireless/rt2x00/rt2800usb.c -+++ b/drivers/net/wireless/rt2x00/rt2800usb.c -@@ -860,6 +860,36 @@ static void rt2800usb_config_duration(st - rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg); - } - -+static void rt2800usb_config_ps(struct rt2x00_dev *rt2x00dev, -+ struct rt2x00lib_conf *libconf) -+{ -+ enum dev_state state = -+ (libconf->conf->flags & IEEE80211_CONF_PS) ? -+ STATE_SLEEP : STATE_AWAKE; -+ u32 reg; -+ -+ if (state == STATE_SLEEP) { -+ rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0); -+ -+ rt2x00usb_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®); -+ rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5); -+ rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, -+ libconf->conf->listen_interval - 1); -+ rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 1); -+ rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg); -+ -+ rt2800usb_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 0); -+ } else { -+ rt2800usb_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0); -+ -+ rt2x00usb_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®); -+ rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0); -+ rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0); -+ rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 0); -+ rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg); -+ } -+} -+ - static void rt2800usb_config(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf, - const unsigned int flags) -@@ -876,6 +906,8 @@ static void rt2800usb_config(struct rt2x - rt2800usb_config_retry_limit(rt2x00dev, libconf); - if (flags & IEEE80211_CONF_CHANGE_BEACON_INTERVAL) - rt2800usb_config_duration(rt2x00dev, libconf); -+ if (flags & IEEE80211_CONF_CHANGE_PS) -+ rt2800usb_config_ps(rt2x00dev, libconf); - } - - /* -@@ -2112,7 +2144,9 @@ static int rt2800usb_probe_hw_mode(struc - */ - rt2x00dev->hw->flags = - IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | -- IEEE80211_HW_SIGNAL_DBM; -+ IEEE80211_HW_SIGNAL_DBM | -+ IEEE80211_HW_SUPPORTS_PS | -+ IEEE80211_HW_PS_NULLFUNC_STACK; - rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE + TXINFO_DESC_SIZE; - - SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); diff --git a/package/mac80211/patches/310-rt2x00-Accept-beacons-in-normal-mode-rt2800pci.patch b/package/mac80211/patches/310-rt2x00-Accept-beacons-in-normal-mode-rt2800pci.patch deleted file mode 100644 index 06d242a..0000000 --- a/package/mac80211/patches/310-rt2x00-Accept-beacons-in-normal-mode-rt2800pci.patch +++ /dev/null @@ -1,22 +0,0 @@ -From 7191a5e338105009714415358773c828bbe90bb9 Mon Sep 17 00:00:00 2001 -From: Ivo van Doorn <IvDoorn@gmail.com> -Date: Sat, 10 Jan 2009 14:50:44 +0100 -Subject: [PATCH] rt2x00: Accept beacons in normal mode (rt2800pci) - -Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> ---- - drivers/net/wireless/rt2x00/rt2800pci.c | 3 +-- - 1 files changed, 1 insertions(+), 2 deletions(-) - ---- a/drivers/net/wireless/rt2x00/rt2800pci.c -+++ b/drivers/net/wireless/rt2x00/rt2800pci.c -@@ -467,8 +467,7 @@ static void rt2800pci_config_filter(stru - !(filter_flags & FIF_PLCPFAIL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_TO_ME, - !(filter_flags & FIF_PROMISC_IN_BSS)); -- rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_MY_BSSD, -- !(filter_flags & FIF_OTHER_BSS)); -+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_VER_ERROR, 1); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_MULTICAST, - !(filter_flags & FIF_ALLMULTI)); diff --git a/package/mac80211/patches/311-rt2x00-Accept-beacons-in-normal-mode-rt2800usb.patch b/package/mac80211/patches/311-rt2x00-Accept-beacons-in-normal-mode-rt2800usb.patch deleted file mode 100644 index 674ee00..0000000 --- a/package/mac80211/patches/311-rt2x00-Accept-beacons-in-normal-mode-rt2800usb.patch +++ /dev/null @@ -1,22 +0,0 @@ -From 6a27df44711605e730a92b1029fe54d6c988ed13 Mon Sep 17 00:00:00 2001 -From: Ivo van Doorn <IvDoorn@gmail.com> -Date: Sat, 10 Jan 2009 14:51:24 +0100 -Subject: [PATCH] rt2x00: Accept beacons in normal mode (rt2800usb) - -Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> ---- - drivers/net/wireless/rt2x00/rt2800usb.c | 3 +-- - 1 files changed, 1 insertions(+), 2 deletions(-) - ---- a/drivers/net/wireless/rt2x00/rt2800usb.c -+++ b/drivers/net/wireless/rt2x00/rt2800usb.c -@@ -447,8 +447,7 @@ static void rt2800usb_config_filter(stru - !(filter_flags & FIF_PLCPFAIL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_TO_ME, - !(filter_flags & FIF_PROMISC_IN_BSS)); -- rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_MY_BSSD, -- !(filter_flags & FIF_OTHER_BSS)); -+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_VER_ERROR, 1); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_MULTICAST, - !(filter_flags & FIF_ALLMULTI)); diff --git a/package/mac80211/patches/312-rt2x00-Fix-TX-descriptor-usage-rt2800usb.patch b/package/mac80211/patches/312-rt2x00-Fix-TX-descriptor-usage-rt2800usb.patch deleted file mode 100644 index 897a62e..0000000 --- a/package/mac80211/patches/312-rt2x00-Fix-TX-descriptor-usage-rt2800usb.patch +++ /dev/null @@ -1,112 +0,0 @@ -From e9a3a3b9744f0204ec4beec8f9bea3c11ce6f54b Mon Sep 17 00:00:00 2001 -From: Ivo van Doorn <IvDoorn@gmail.com> -Date: Sat, 10 Jan 2009 19:21:46 +0100 -Subject: [PATCH] rt2x00: Fix TX descriptor usage (rt2800usb) - -Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> ---- - drivers/net/wireless/rt2x00/rt2800usb.c | 46 ++++++++++--------------------- - drivers/net/wireless/rt2x00/rt2800usb.h | 1 + - 2 files changed, 16 insertions(+), 31 deletions(-) - ---- a/drivers/net/wireless/rt2x00/rt2800usb.c -+++ b/drivers/net/wireless/rt2x00/rt2800usb.c -@@ -1635,8 +1635,8 @@ static void rt2800usb_write_tx_desc(stru - struct txentry_desc *txdesc) - { - struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); -- __le32 *txd = skbdesc->desc; -- __le32 *txwi = txd + TXD_DESC_SIZE; -+ __le32 *txi = skbdesc->desc; -+ __le32 *txwi = txi + TXINFO_DESC_SIZE; - u32 word; - - /* -@@ -1683,31 +1683,15 @@ static void rt2800usb_write_tx_desc(stru - /* - * Initialize TX descriptor - */ -- rt2x00_desc_read(txd, 0, &word); -- rt2x00_set_field32(&word, TXD_W0_SD_PTR0, skbdesc->skb_dma); -- rt2x00_desc_write(txd, 0, word); -- -- rt2x00_desc_read(txd, 1, &word); -- rt2x00_set_field32(&word, TXD_W1_SD_LEN1, skb->len); -- rt2x00_set_field32(&word, TXD_W1_LAST_SEC1, 1); -- rt2x00_set_field32(&word, TXD_W1_BURST, -+ rt2x00_desc_read(txi, 0, &word); -+ rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_PKT_LEN, skb->len); -+ rt2x00_set_field32(&word, TXINFO_W0_WIV, 1); -+ rt2x00_set_field32(&word, TXINFO_W0_QSEL, 2); -+ rt2x00_set_field32(&word, TXINFO_W0_SW_USE_LAST_ROUND, 0); -+ rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_NEXT_VALID, 0); -+ rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_BURST, - test_bit(ENTRY_TXD_BURST, &txdesc->flags)); -- rt2x00_set_field32(&word, TXD_W1_SD_LEN0, -- rt2x00dev->hw->extra_tx_headroom); -- rt2x00_set_field32(&word, TXD_W1_LAST_SEC0, -- !test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags)); -- rt2x00_set_field32(&word, TXD_W1_DMA_DONE, 0); -- rt2x00_desc_write(txd, 1, word); -- -- rt2x00_desc_read(txd, 2, &word); -- rt2x00_set_field32(&word, TXD_W2_SD_PTR1, -- skbdesc->skb_dma + rt2x00dev->hw->extra_tx_headroom); -- rt2x00_desc_write(txd, 2, word); -- -- rt2x00_desc_read(txd, 3, &word); -- rt2x00_set_field32(&word, TXD_W3_WIV, 1); -- rt2x00_set_field32(&word, TXD_W3_QSEL, 2); -- rt2x00_desc_write(txd, 3, word); -+ rt2x00_desc_write(txi, 0, word); - } - - /* -@@ -1881,9 +1865,9 @@ static void rt2800usb_fill_rxdone(struct - rxdesc->size = rt2x00_get_field32(rxwi0, RXWI_W0_MPDU_TOTAL_BYTE_COUNT); - - /* -- * Remove TXWI descriptor from start of buffer. -+ * Remove RXWI descriptor from start of buffer. - */ -- skb_pull(entry->skb, TXWI_DESC_SIZE + skbdesc->desc_len); -+ skb_pull(entry->skb, RXWI_DESC_SIZE + skbdesc->desc_len); - skb_trim(entry->skb, rxdesc->size); - } - -@@ -2146,7 +2130,7 @@ static int rt2800usb_probe_hw_mode(struc - IEEE80211_HW_SIGNAL_DBM | - IEEE80211_HW_SUPPORTS_PS | - IEEE80211_HW_PS_NULLFUNC_STACK; -- rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE + TXINFO_DESC_SIZE; -+ rt2x00dev->hw->extra_tx_headroom = TXINFO_DESC_SIZE + TXWI_DESC_SIZE; - - SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); - SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, -@@ -2445,14 +2429,14 @@ static const struct data_queue_desc rt28 - static const struct data_queue_desc rt2800usb_queue_tx = { - .entry_num = TX_ENTRIES, - .data_size = DATA_FRAME_SIZE, -- .desc_size = TXD_DESC_SIZE, -+ .desc_size = TXINFO_DESC_SIZE + TXWI_DESC_SIZE, - .priv_size = sizeof(struct queue_entry_priv_usb), - }; - - static const struct data_queue_desc rt2800usb_queue_bcn = { - .entry_num = 8 * BEACON_ENTRIES, - .data_size = MGMT_FRAME_SIZE, -- .desc_size = TXWI_DESC_SIZE, -+ .desc_size = TXINFO_DESC_SIZE + TXWI_DESC_SIZE, - .priv_size = sizeof(struct queue_entry_priv_usb), - }; - ---- a/drivers/net/wireless/rt2x00/rt2800usb.h -+++ b/drivers/net/wireless/rt2x00/rt2800usb.h -@@ -1744,6 +1744,7 @@ struct hw_key_entry { - #define TXINFO_W0_USB_DMA_TX_PKT_LEN FIELD32(0x0000ffff) - #define TXINFO_W0_WIV FIELD32(0x01000000) - #define TXINFO_W0_QSEL FIELD32(0x06000000) -+#define TXINFO_W0_SW_USE_LAST_ROUND FIELD32(0x08000000) - #define TXINFO_W0_USB_DMA_NEXT_VALID FIELD32(0x40000000) - #define TXINFO_W0_USB_DMA_TX_BURST FIELD32(0x80000000) - diff --git a/package/mac80211/patches/313-rt2x00-Add-TXWI-to-DMA-size-rt2800usb.patch b/package/mac80211/patches/313-rt2x00-Add-TXWI-to-DMA-size-rt2800usb.patch deleted file mode 100644 index 1ccae4d..0000000 --- a/package/mac80211/patches/313-rt2x00-Add-TXWI-to-DMA-size-rt2800usb.patch +++ /dev/null @@ -1,22 +0,0 @@ -From fa9b5f135ba5e7877d1e3e970d39fcfa07f4004b Mon Sep 17 00:00:00 2001 -From: Ivo van Doorn <IvDoorn@gmail.com> -Date: Sat, 10 Jan 2009 20:07:13 +0100 -Subject: [PATCH] rt2x00: Add TXWI to DMA size (rt2800usb) - -Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> ---- - drivers/net/wireless/rt2x00/rt2800usb.c | 3 ++- - 1 files changed, 2 insertions(+), 1 deletions(-) - ---- a/drivers/net/wireless/rt2x00/rt2800usb.c -+++ b/drivers/net/wireless/rt2x00/rt2800usb.c -@@ -1684,7 +1684,8 @@ static void rt2800usb_write_tx_desc(stru - * Initialize TX descriptor - */ - rt2x00_desc_read(txi, 0, &word); -- rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_PKT_LEN, skb->len); -+ rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_PKT_LEN, -+ roundup(skb->len + TXWI_DESC_SIZE, 4)); - rt2x00_set_field32(&word, TXINFO_W0_WIV, 1); - rt2x00_set_field32(&word, TXINFO_W0_QSEL, 2); - rt2x00_set_field32(&word, TXINFO_W0_SW_USE_LAST_ROUND, 0); diff --git a/package/mac80211/patches/314-rt2x00-Wait-for-WPDMA-between-CRS-and-BBP-init-rt2.patch b/package/mac80211/patches/314-rt2x00-Wait-for-WPDMA-between-CRS-and-BBP-init-rt2.patch deleted file mode 100644 index 43ed0c2..0000000 --- a/package/mac80211/patches/314-rt2x00-Wait-for-WPDMA-between-CRS-and-BBP-init-rt2.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 827feb9f680fff5a4f1e04740357ea2c92e10b06 Mon Sep 17 00:00:00 2001 -From: Ivo van Doorn <IvDoorn@gmail.com> -Date: Tue, 13 Jan 2009 21:29:37 +0100 -Subject: [PATCH] rt2x00: Wait for WPDMA between CRS and BBP init (rt2800pci) - -Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> ---- - drivers/net/wireless/rt2x00/rt2800pci.c | 4 +--- - 1 files changed, 1 insertions(+), 3 deletions(-) - ---- a/drivers/net/wireless/rt2x00/rt2800pci.c -+++ b/drivers/net/wireless/rt2x00/rt2800pci.c -@@ -1622,6 +1622,7 @@ static int rt2800pci_enable_radio(struct - if (unlikely(rt2800pci_wait_wpdma_ready(rt2x00dev) || - rt2800pci_init_queues(rt2x00dev) || - rt2800pci_init_registers(rt2x00dev) || -+ rt2800pci_wait_wpdma_ready(rt2x00dev) || - rt2800pci_init_bbp(rt2x00dev))) - return -EIO; - -@@ -1630,9 +1631,6 @@ static int rt2800pci_enable_radio(struct - */ - rt2800pci_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0); - -- /* Wait for DMA, ignore error */ -- rt2800pci_wait_wpdma_ready(rt2x00dev); -- - /* - * Enable RX. - */ diff --git a/package/mac80211/patches/316-rt2x00-Fix-register-initialization-rt2800pci.patch b/package/mac80211/patches/316-rt2x00-Fix-register-initialization-rt2800pci.patch deleted file mode 100644 index 0f45cf9..0000000 --- a/package/mac80211/patches/316-rt2x00-Fix-register-initialization-rt2800pci.patch +++ /dev/null @@ -1,55 +0,0 @@ -From c3a42af4455fd75735c218ffac392ef86a3a250f Mon Sep 17 00:00:00 2001 -From: Ivo van Doorn <IvDoorn@gmail.com> -Date: Sat, 17 Jan 2009 19:18:38 +0100 -Subject: [PATCH] rt2x00: Fix register initialization (rt2800pci) - -Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> ---- - drivers/net/wireless/rt2x00/rt2800pci.c | 19 +++++++++++++++---- - 1 files changed, 15 insertions(+), 4 deletions(-) - ---- a/drivers/net/wireless/rt2x00/rt2800pci.c -+++ b/drivers/net/wireless/rt2x00/rt2800pci.c -@@ -602,9 +602,12 @@ static void rt2800pci_config_ant(struct - */ - switch (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH)) { - case 1: -+ rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0); - rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0); - break; - case 2: -+ rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 16); -+ break; - case 3: - /* Do nothing */ - break; -@@ -1371,7 +1374,7 @@ static int rt2800pci_init_registers(stru - * ASIC will keep garbage value after boot, clear encryption keys. - */ - for (i = 0; i < 254; i++) { -- u32 wcid[2] = { 0xffffffff, 0x0000ffff }; -+ u32 wcid[2] = { 0xffffffff, 0x00ffffff }; - rt2x00pci_register_multiwrite(rt2x00dev, MAC_WCID_ENTRY(i), - wcid, sizeof(wcid)); - } -@@ -2158,9 +2161,17 @@ static int rt2800pci_validate_eeprom(str - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word); -- if (word != 0) { -- /* NIC configuration must always be 0. */ -- word = 0; -+ if (word == 0xffff) { -+ rt2x00_set_field16(&word, EEPROM_NIC_HW_RADIO, 0); -+ rt2x00_set_field16(&word, EEPROM_NIC_DYNAMIC_TX_AGC, 0); -+ rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_BG, 0); -+ rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_A, 0); -+ rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0); -+ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_BG, 0); -+ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_A, 0); -+ rt2x00_set_field16(&word, EEPROM_NIC_WPS_PBC, 0); -+ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_BG, 0); -+ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_A, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word); - EEPROM(rt2x00dev, "NIC: 0x%04x\n", word); - } diff --git a/package/mac80211/patches/317-rt2x00-Fix-register-initialization-rt2800usb.patch b/package/mac80211/patches/317-rt2x00-Fix-register-initialization-rt2800usb.patch deleted file mode 100644 index de54242..0000000 --- a/package/mac80211/patches/317-rt2x00-Fix-register-initialization-rt2800usb.patch +++ /dev/null @@ -1,63 +0,0 @@ -From d97bb9291c59852989a86667ba317613fa2b77c5 Mon Sep 17 00:00:00 2001 -From: Ivo van Doorn <IvDoorn@gmail.com> -Date: Sat, 17 Jan 2009 19:19:16 +0100 -Subject: [PATCH] rt2x00: Fix register initialization (rt2800usb) - -Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> ---- - drivers/net/wireless/rt2x00/rt2800usb.c | 20 ++++++++++++++++---- - 1 files changed, 16 insertions(+), 4 deletions(-) - ---- a/drivers/net/wireless/rt2x00/rt2800usb.c -+++ b/drivers/net/wireless/rt2x00/rt2800usb.c -@@ -582,9 +582,12 @@ static void rt2800usb_config_ant(struct - */ - switch (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH)) { - case 1: -+ rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0); - rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0); - break; - case 2: -+ rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 16); -+ break; - case 3: - /* Do nothing */ - break; -@@ -1279,7 +1282,7 @@ static int rt2800usb_init_registers(stru - * ASIC will keep garbage value after boot, clear encryption keys. - */ - for (i = 0; i < 254; i++) { -- u32 wcid[2] = { 0xffffffff, 0x0000ffff }; -+ u32 wcid[2] = { 0xffffffff, 0x00ffffff }; - rt2x00usb_register_multiwrite(rt2x00dev, MAC_WCID_ENTRY(i), - wcid, sizeof(wcid)); - } -@@ -1421,6 +1424,7 @@ static int rt2800usb_init_bbp(struct rt2 - rt2800usb_bbp_write(rt2x00dev, 86, 0x00); - rt2800usb_bbp_write(rt2x00dev, 91, 0x04); - rt2800usb_bbp_write(rt2x00dev, 92, 0x00); -+ rt2800usb_bbp_write(rt2x00dev, 103, 0x00); - rt2800usb_bbp_write(rt2x00dev, 105, 0x05); - - if (rt2x00_rev(&rt2x00dev->chip) == RT2870_VERSION_C) { -@@ -1904,9 +1908,17 @@ static int rt2800usb_validate_eeprom(str - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word); -- if (word != 0) { -- /* NIC configuration must always be 0. */ -- word = 0; -+ if (word == 0xffff) { -+ rt2x00_set_field16(&word, EEPROM_NIC_HW_RADIO, 0); -+ rt2x00_set_field16(&word, EEPROM_NIC_DYNAMIC_TX_AGC, 0); -+ rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_BG, 0); -+ rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_A, 0); -+ rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0); -+ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_BG, 0); -+ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_A, 0); -+ rt2x00_set_field16(&word, EEPROM_NIC_WPS_PBC, 0); -+ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_BG, 0); -+ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_A, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word); - EEPROM(rt2x00dev, "NIC: 0x%04x\n", word); - } diff --git a/package/mac80211/patches/319-rt2x00-More-register-fixes-rt2800pci.patch b/package/mac80211/patches/319-rt2x00-More-register-fixes-rt2800pci.patch deleted file mode 100644 index 0d0162d..0000000 --- a/package/mac80211/patches/319-rt2x00-More-register-fixes-rt2800pci.patch +++ /dev/null @@ -1,154 +0,0 @@ -From de75c463ca06352ac36c4a28440d10d5523bd6d9 Mon Sep 17 00:00:00 2001 -From: Ivo van Doorn <IvDoorn@gmail.com> -Date: Sat, 17 Jan 2009 20:27:10 +0100 -Subject: [PATCH] rt2x00: More register fixes (rt2800pci) - -Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> ---- - drivers/net/wireless/rt2x00/rt2800pci.c | 59 +++++++++++++++---------------- - drivers/net/wireless/rt2x00/rt2800pci.h | 8 ++-- - 2 files changed, 33 insertions(+), 34 deletions(-) - ---- a/drivers/net/wireless/rt2x00/rt2800pci.c -+++ b/drivers/net/wireless/rt2x00/rt2800pci.c -@@ -2506,33 +2506,34 @@ static int rt2800pci_set_rts_threshold(s - { - struct rt2x00_dev *rt2x00dev = hw->priv; - u32 reg; -+ bool enabled = (value < IEEE80211_MAX_RTS_THRESHOLD); - - rt2x00pci_register_read(rt2x00dev, TX_RTS_CFG, ®); - rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES, value); - rt2x00pci_register_write(rt2x00dev, TX_RTS_CFG, reg); - - rt2x00pci_register_read(rt2x00dev, CCK_PROT_CFG, ®); -- rt2x00_set_field32(®, CCK_PROT_CFG_RTS_TH_EN, 1); -+ rt2x00_set_field32(®, CCK_PROT_CFG_RTS_TH_EN, enabled); - rt2x00pci_register_write(rt2x00dev, CCK_PROT_CFG, reg); - - rt2x00pci_register_read(rt2x00dev, OFDM_PROT_CFG, ®); -- rt2x00_set_field32(®, OFDM_PROT_CFG_RTS_TH_EN, 1); -+ rt2x00_set_field32(®, OFDM_PROT_CFG_RTS_TH_EN, enabled); - rt2x00pci_register_write(rt2x00dev, OFDM_PROT_CFG, reg); - - rt2x00pci_register_read(rt2x00dev, MM20_PROT_CFG, ®); -- rt2x00_set_field32(®, MM20_PROT_CFG_RTS_TH_EN, 1); -+ rt2x00_set_field32(®, MM20_PROT_CFG_RTS_TH_EN, enabled); - rt2x00pci_register_write(rt2x00dev, MM20_PROT_CFG, reg); - - rt2x00pci_register_read(rt2x00dev, MM40_PROT_CFG, ®); -- rt2x00_set_field32(®, MM40_PROT_CFG_RTS_TH_EN, 1); -+ rt2x00_set_field32(®, MM40_PROT_CFG_RTS_TH_EN, enabled); - rt2x00pci_register_write(rt2x00dev, MM40_PROT_CFG, reg); - - rt2x00pci_register_read(rt2x00dev, GF20_PROT_CFG, ®); -- rt2x00_set_field32(®, GF20_PROT_CFG_RTS_TH_EN, 1); -+ rt2x00_set_field32(®, GF20_PROT_CFG_RTS_TH_EN, enabled); - rt2x00pci_register_write(rt2x00dev, GF20_PROT_CFG, reg); - - rt2x00pci_register_read(rt2x00dev, GF40_PROT_CFG, ®); -- rt2x00_set_field32(®, GF40_PROT_CFG_RTS_TH_EN, 1); -+ rt2x00_set_field32(®, GF40_PROT_CFG_RTS_TH_EN, enabled); - rt2x00pci_register_write(rt2x00dev, GF40_PROT_CFG, reg); - - return 0; -@@ -2558,24 +2559,23 @@ static int rt2800pci_conf_tx(struct ieee - if (retval) - return retval; - -+ /* -+ * We only need to perform additional register initialization -+ * for WMM queues/ -+ */ -+ if (queue_idx >= 4) -+ return 0; -+ - queue = rt2x00queue_get_queue(rt2x00dev, queue_idx); - - /* Update WMM TXOP register */ -- if (queue_idx < 2) { -- field.bit_offset = queue_idx * 16; -- field.bit_mask = 0xffff << field.bit_offset; -- -- rt2x00pci_register_read(rt2x00dev, WMM_TXOP0_CFG, ®); -- rt2x00_set_field32(®, field, queue->txop); -- rt2x00pci_register_write(rt2x00dev, WMM_TXOP0_CFG, reg); -- } else if (queue_idx < 4) { -- field.bit_offset = (queue_idx - 2) * 16; -- field.bit_mask = 0xffff << field.bit_offset; -- -- rt2x00pci_register_read(rt2x00dev, WMM_TXOP1_CFG, ®); -- rt2x00_set_field32(®, field, queue->txop); -- rt2x00pci_register_write(rt2x00dev, WMM_TXOP1_CFG, reg); -- } -+ offset = WMM_TXOP0_CFG + (sizeof(u32) * (!!(queue_idx & 2))); -+ field.bit_offset = (queue_idx & 1) * 16; -+ field.bit_mask = 0xffff << field.bit_offset; -+ -+ rt2x00pci_register_read(rt2x00dev, offset, ®); -+ rt2x00_set_field32(®, field, queue->txop); -+ rt2x00pci_register_write(rt2x00dev, offset, reg); - - /* Update WMM registers */ - field.bit_offset = queue_idx * 4; -@@ -2594,15 +2594,14 @@ static int rt2800pci_conf_tx(struct ieee - rt2x00pci_register_write(rt2x00dev, WMM_CWMAX_CFG, reg); - - /* Update EDCA registers */ -- if (queue_idx < 4) { -- offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx); -+ offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx); - -- rt2x00pci_register_read(rt2x00dev, offset, ®); -- rt2x00_set_field32(®, EDCA_AC0_CFG_AIFSN, queue->aifs); -- rt2x00_set_field32(®, EDCA_AC0_CFG_CWMIN, queue->cw_min); -- rt2x00_set_field32(®, EDCA_AC0_CFG_CWMAX, queue->cw_max); -- rt2x00pci_register_write(rt2x00dev, offset, reg); -- } -+ rt2x00pci_register_read(rt2x00dev, offset, ®); -+ rt2x00_set_field32(®, EDCA_AC0_CFG_TX_OP, queue->txop); -+ rt2x00_set_field32(®, EDCA_AC0_CFG_AIFSN, queue->aifs); -+ rt2x00_set_field32(®, EDCA_AC0_CFG_CWMIN, queue->cw_min); -+ rt2x00_set_field32(®, EDCA_AC0_CFG_CWMAX, queue->cw_max); -+ rt2x00pci_register_write(rt2x00dev, offset, reg); - - return 0; - } ---- a/drivers/net/wireless/rt2x00/rt2800pci.h -+++ b/drivers/net/wireless/rt2x00/rt2800pci.h -@@ -667,7 +667,7 @@ - * EDCA_AC0_CFG: - */ - #define EDCA_AC0_CFG 0x1300 --#define EDCA_AC0_CFG_AC_TX_OP FIELD32(0x000000ff) -+#define EDCA_AC0_CFG_TX_OP FIELD32(0x000000ff) - #define EDCA_AC0_CFG_AIFSN FIELD32(0x00000f00) - #define EDCA_AC0_CFG_CWMIN FIELD32(0x0000f000) - #define EDCA_AC0_CFG_CWMAX FIELD32(0x000f0000) -@@ -676,7 +676,7 @@ - * EDCA_AC1_CFG: - */ - #define EDCA_AC1_CFG 0x1304 --#define EDCA_AC1_CFG_AC_TX_OP FIELD32(0x000000ff) -+#define EDCA_AC1_CFG_TX_OP FIELD32(0x000000ff) - #define EDCA_AC1_CFG_AIFSN FIELD32(0x00000f00) - #define EDCA_AC1_CFG_CWMIN FIELD32(0x0000f000) - #define EDCA_AC1_CFG_CWMAX FIELD32(0x000f0000) -@@ -685,7 +685,7 @@ - * EDCA_AC2_CFG: - */ - #define EDCA_AC2_CFG 0x1308 --#define EDCA_AC2_CFG_AC_TX_OP FIELD32(0x000000ff) -+#define EDCA_AC2_CFG_TX_OP FIELD32(0x000000ff) - #define EDCA_AC2_CFG_AIFSN FIELD32(0x00000f00) - #define EDCA_AC2_CFG_CWMIN FIELD32(0x0000f000) - #define EDCA_AC2_CFG_CWMAX FIELD32(0x000f0000) -@@ -694,7 +694,7 @@ - * EDCA_AC3_CFG: - */ - #define EDCA_AC3_CFG 0x130c --#define EDCA_AC3_CFG_AC_TX_OP FIELD32(0x000000ff) -+#define EDCA_AC3_CFG_TX_OP FIELD32(0x000000ff) - #define EDCA_AC3_CFG_AIFSN FIELD32(0x00000f00) - #define EDCA_AC3_CFG_CWMIN FIELD32(0x0000f000) - #define EDCA_AC3_CFG_CWMAX FIELD32(0x000f0000) diff --git a/package/mac80211/patches/320-rt2x00-More-register-fixes-rt2800usb.patch b/package/mac80211/patches/320-rt2x00-More-register-fixes-rt2800usb.patch deleted file mode 100644 index 2e7c496..0000000 --- a/package/mac80211/patches/320-rt2x00-More-register-fixes-rt2800usb.patch +++ /dev/null @@ -1,154 +0,0 @@ -From 6d9ef2042aff47309dbe973da5723c4972ed95bb Mon Sep 17 00:00:00 2001 -From: Ivo van Doorn <IvDoorn@gmail.com> -Date: Sat, 17 Jan 2009 20:27:40 +0100 -Subject: [PATCH] rt2x00: More register fixes (rt2800usb) - -Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> ---- - drivers/net/wireless/rt2x00/rt2800usb.c | 59 +++++++++++++++---------------- - drivers/net/wireless/rt2x00/rt2800usb.h | 8 ++-- - 2 files changed, 33 insertions(+), 34 deletions(-) - ---- a/drivers/net/wireless/rt2x00/rt2800usb.c -+++ b/drivers/net/wireless/rt2x00/rt2800usb.c -@@ -2261,33 +2261,34 @@ static int rt2800usb_set_rts_threshold(s - { - struct rt2x00_dev *rt2x00dev = hw->priv; - u32 reg; -+ bool enabled = (value < IEEE80211_MAX_RTS_THRESHOLD); - - rt2x00usb_register_read(rt2x00dev, TX_RTS_CFG, ®); - rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES, value); - rt2x00usb_register_write(rt2x00dev, TX_RTS_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, CCK_PROT_CFG, ®); -- rt2x00_set_field32(®, CCK_PROT_CFG_RTS_TH_EN, 1); -+ rt2x00_set_field32(®, CCK_PROT_CFG_RTS_TH_EN, enabled); - rt2x00usb_register_write(rt2x00dev, CCK_PROT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, OFDM_PROT_CFG, ®); -- rt2x00_set_field32(®, OFDM_PROT_CFG_RTS_TH_EN, 1); -+ rt2x00_set_field32(®, OFDM_PROT_CFG_RTS_TH_EN, enabled); - rt2x00usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, MM20_PROT_CFG, ®); -- rt2x00_set_field32(®, MM20_PROT_CFG_RTS_TH_EN, 1); -+ rt2x00_set_field32(®, MM20_PROT_CFG_RTS_TH_EN, enabled); - rt2x00usb_register_write(rt2x00dev, MM20_PROT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, MM40_PROT_CFG, ®); -- rt2x00_set_field32(®, MM40_PROT_CFG_RTS_TH_EN, 1); -+ rt2x00_set_field32(®, MM40_PROT_CFG_RTS_TH_EN, enabled); - rt2x00usb_register_write(rt2x00dev, MM40_PROT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, GF20_PROT_CFG, ®); -- rt2x00_set_field32(®, GF20_PROT_CFG_RTS_TH_EN, 1); -+ rt2x00_set_field32(®, GF20_PROT_CFG_RTS_TH_EN, enabled); - rt2x00usb_register_write(rt2x00dev, GF20_PROT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, GF40_PROT_CFG, ®); -- rt2x00_set_field32(®, GF40_PROT_CFG_RTS_TH_EN, 1); -+ rt2x00_set_field32(®, GF40_PROT_CFG_RTS_TH_EN, enabled); - rt2x00usb_register_write(rt2x00dev, GF40_PROT_CFG, reg); - - return 0; -@@ -2313,24 +2314,23 @@ static int rt2800usb_conf_tx(struct ieee - if (retval) - return retval; - -+ /* -+ * We only need to perform additional register initialization -+ * for WMM queues/ -+ */ -+ if (queue_idx >= 4) -+ return 0; -+ - queue = rt2x00queue_get_queue(rt2x00dev, queue_idx); - - /* Update WMM TXOP register */ -- if (queue_idx < 2) { -- field.bit_offset = queue_idx * 16; -- field.bit_mask = 0xffff << field.bit_offset; -- -- rt2x00usb_register_read(rt2x00dev, WMM_TXOP0_CFG, ®); -- rt2x00_set_field32(®, field, queue->txop); -- rt2x00usb_register_write(rt2x00dev, WMM_TXOP0_CFG, reg); -- } else if (queue_idx < 4) { -- field.bit_offset = (queue_idx - 2) * 16; -- field.bit_mask = 0xffff << field.bit_offset; -- -- rt2x00usb_register_read(rt2x00dev, WMM_TXOP1_CFG, ®); -- rt2x00_set_field32(®, field, queue->txop); -- rt2x00usb_register_write(rt2x00dev, WMM_TXOP1_CFG, reg); -- } -+ offset = WMM_TXOP0_CFG + (sizeof(u32) * (!!(queue_idx & 2))); -+ field.bit_offset = (queue_idx & 1) * 16; -+ field.bit_mask = 0xffff << field.bit_offset; -+ -+ rt2x00usb_register_read(rt2x00dev, offset, ®); -+ rt2x00_set_field32(®, field, queue->txop); -+ rt2x00usb_register_write(rt2x00dev, offset, reg); - - /* Update WMM registers */ - field.bit_offset = queue_idx * 4; -@@ -2349,15 +2349,14 @@ static int rt2800usb_conf_tx(struct ieee - rt2x00usb_register_write(rt2x00dev, WMM_CWMAX_CFG, reg); - - /* Update EDCA registers */ -- if (queue_idx < 4) { -- offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx); -+ offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx); - -- rt2x00usb_register_read(rt2x00dev, offset, ®); -- rt2x00_set_field32(®, EDCA_AC0_CFG_AIFSN, queue->aifs); -- rt2x00_set_field32(®, EDCA_AC0_CFG_CWMIN, queue->cw_min); -- rt2x00_set_field32(®, EDCA_AC0_CFG_CWMAX, queue->cw_max); -- rt2x00usb_register_write(rt2x00dev, offset, reg); -- } -+ rt2x00usb_register_read(rt2x00dev, offset, ®); -+ rt2x00_set_field32(®, EDCA_AC0_CFG_TX_OP, queue->txop); -+ rt2x00_set_field32(®, EDCA_AC0_CFG_AIFSN, queue->aifs); -+ rt2x00_set_field32(®, EDCA_AC0_CFG_CWMIN, queue->cw_min); -+ rt2x00_set_field32(®, EDCA_AC0_CFG_CWMAX, queue->cw_max); -+ rt2x00usb_register_write(rt2x00dev, offset, reg); - - return 0; - } ---- a/drivers/net/wireless/rt2x00/rt2800usb.h -+++ b/drivers/net/wireless/rt2x00/rt2800usb.h -@@ -670,7 +670,7 @@ - * EDCA_AC0_CFG: - */ - #define EDCA_AC0_CFG 0x1300 --#define EDCA_AC0_CFG_AC_TX_OP FIELD32(0x000000ff) -+#define EDCA_AC0_CFG_TX_OP FIELD32(0x000000ff) - #define EDCA_AC0_CFG_AIFSN FIELD32(0x00000f00) - #define EDCA_AC0_CFG_CWMIN FIELD32(0x0000f000) - #define EDCA_AC0_CFG_CWMAX FIELD32(0x000f0000) -@@ -679,7 +679,7 @@ - * EDCA_AC1_CFG: - */ - #define EDCA_AC1_CFG 0x1304 --#define EDCA_AC1_CFG_AC_TX_OP FIELD32(0x000000ff) -+#define EDCA_AC1_CFG_TX_OP FIELD32(0x000000ff) - #define EDCA_AC1_CFG_AIFSN FIELD32(0x00000f00) - #define EDCA_AC1_CFG_CWMIN FIELD32(0x0000f000) - #define EDCA_AC1_CFG_CWMAX FIELD32(0x000f0000) -@@ -688,7 +688,7 @@ - * EDCA_AC2_CFG: - */ - #define EDCA_AC2_CFG 0x1308 --#define EDCA_AC2_CFG_AC_TX_OP FIELD32(0x000000ff) -+#define EDCA_AC2_CFG_TX_OP FIELD32(0x000000ff) - #define EDCA_AC2_CFG_AIFSN FIELD32(0x00000f00) - #define EDCA_AC2_CFG_CWMIN FIELD32(0x0000f000) - #define EDCA_AC2_CFG_CWMAX FIELD32(0x000f0000) -@@ -697,7 +697,7 @@ - * EDCA_AC3_CFG: - */ - #define EDCA_AC3_CFG 0x130c --#define EDCA_AC3_CFG_AC_TX_OP FIELD32(0x000000ff) -+#define EDCA_AC3_CFG_TX_OP FIELD32(0x000000ff) - #define EDCA_AC3_CFG_AIFSN FIELD32(0x00000f00) - #define EDCA_AC3_CFG_CWMIN FIELD32(0x0000f000) - #define EDCA_AC3_CFG_CWMAX FIELD32(0x000f0000) diff --git a/package/mac80211/patches/324-rt2x00-Fix-preamble-detection-rt2x00ht.patch b/package/mac80211/patches/324-rt2x00-Fix-preamble-detection-rt2x00ht.patch deleted file mode 100644 index 1321232..0000000 --- a/package/mac80211/patches/324-rt2x00-Fix-preamble-detection-rt2x00ht.patch +++ /dev/null @@ -1,80 +0,0 @@ -From ecce227dab27aaf2d1c81a605d3e6e6f6d55908a Mon Sep 17 00:00:00 2001 -From: Ivo van Doorn <IvDoorn@gmail.com> -Date: Sun, 18 Jan 2009 20:20:08 +0100 -Subject: [PATCH] rt2x00: Fix preamble detection (rt2x00ht) - -Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> ---- - drivers/net/wireless/rt2x00/rt2x00ht.c | 14 +++++++------- - drivers/net/wireless/rt2x00/rt2x00lib.h | 4 ++-- - drivers/net/wireless/rt2x00/rt2x00queue.c | 2 +- - 3 files changed, 10 insertions(+), 10 deletions(-) - ---- a/drivers/net/wireless/rt2x00/rt2x00ht.c -+++ b/drivers/net/wireless/rt2x00/rt2x00ht.c -@@ -31,10 +31,10 @@ - - void rt2x00ht_create_tx_descriptor(struct queue_entry *entry, - struct txentry_desc *txdesc, -- struct ieee80211_rate *rate) -+ const struct rt2x00_rate *hwrate) - { - struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb); -- const struct rt2x00_rate *hwrate = rt2x00_get_rate(rate->hw_value); -+ struct ieee80211_tx_rate *txrate = &tx_info->control.rates[0]; - - if (tx_info->control.sta) - txdesc->mpdu_density = -@@ -46,7 +46,7 @@ void rt2x00ht_create_tx_descriptor(struc - txdesc->stbc = 0; /* FIXME: What value is needed? */ - - txdesc->mcs = rt2x00_get_rate_mcs(hwrate->mcs); -- if (rate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) -+ if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) - txdesc->mcs |= 0x08; - - /* -@@ -58,12 +58,12 @@ void rt2x00ht_create_tx_descriptor(struc - /* - * Determine HT Mix/Greenfield rate mode - */ -- if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_MCS) -+ if (txrate->flags & IEEE80211_TX_RC_MCS) - txdesc->rate_mode = RATE_MODE_HT_MIX; -- if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_GREEN_FIELD) -+ if (txrate->flags & IEEE80211_TX_RC_GREEN_FIELD) - txdesc->rate_mode = RATE_MODE_HT_GREENFIELD; -- if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_40_MHZ_WIDTH) -+ if (txrate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH) - __set_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags); -- if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_SHORT_GI) -+ if (txrate->flags & IEEE80211_TX_RC_SHORT_GI) - __set_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags); - } ---- a/drivers/net/wireless/rt2x00/rt2x00lib.h -+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h -@@ -344,11 +344,11 @@ static inline void rt2x00crypto_rx_inser - #ifdef CONFIG_RT2X00_LIB_HT - void rt2x00ht_create_tx_descriptor(struct queue_entry *entry, - struct txentry_desc *txdesc, -- struct ieee80211_rate *rate); -+ const struct rt2x00_rate *hwrate); - #else - static inline void rt2x00ht_create_tx_descriptor(struct queue_entry *entry, - struct txentry_desc *txdesc, -- struct ieee80211_rate *rate) -+ const struct rt2x00_rate *hwrate) - { - } - #endif /* CONFIG_RT2X00_LIB_HT */ ---- a/drivers/net/wireless/rt2x00/rt2x00queue.c -+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c -@@ -326,7 +326,7 @@ static void rt2x00queue_create_tx_descri - * Apply TX descriptor handling by components - */ - rt2x00crypto_create_tx_descriptor(entry, txdesc); -- rt2x00ht_create_tx_descriptor(entry, txdesc, rate); -+ rt2x00ht_create_tx_descriptor(entry, txdesc, hwrate); - rt2x00queue_create_tx_descriptor_seq(entry, txdesc); - rt2x00queue_create_tx_descriptor_plcp(entry, txdesc, hwrate); - } diff --git a/package/mac80211/patches/325-rt2x00-rt2x00_rev-should-return-u32.patch b/package/mac80211/patches/325-rt2x00-rt2x00_rev-should-return-u32.patch deleted file mode 100644 index 0a14d9f..0000000 --- a/package/mac80211/patches/325-rt2x00-rt2x00_rev-should-return-u32.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 3dc31edfe4bad6048f097cd4a088499500db9a2e Mon Sep 17 00:00:00 2001 -From: Ivo van Doorn <IvDoorn@gmail.com> -Date: Thu, 22 Jan 2009 21:01:56 +0100 -Subject: [PATCH] rt2x00: rt2x00_rev() should return u32 - -The "rev" field in chipset definition is an u32, -which means that rt2x00_rev() which returns that field -should be of the same type. - -Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> ---- - drivers/net/wireless/rt2x00/rt2x00.h | 2 +- - 1 files changed, 1 insertions(+), 1 deletions(-) - ---- a/drivers/net/wireless/rt2x00/rt2x00.h -+++ b/drivers/net/wireless/rt2x00/rt2x00.h -@@ -878,7 +878,7 @@ static inline char rt2x00_rf(const struc - return (chipset->rf == chip); - } - --static inline u16 rt2x00_rev(const struct rt2x00_chip *chipset) -+static inline u32 rt2x00_rev(const struct rt2x00_chip *chipset) - { - return chipset->rev; - } diff --git a/package/mac80211/patches/326-rt2x00-Update-chipset-ID-handling-rt2800pci.patch b/package/mac80211/patches/326-rt2x00-Update-chipset-ID-handling-rt2800pci.patch deleted file mode 100644 index 284ba04..0000000 --- a/package/mac80211/patches/326-rt2x00-Update-chipset-ID-handling-rt2800pci.patch +++ /dev/null @@ -1,96 +0,0 @@ -From d2216933a12c38ab23ee1170c1c143002a825046 Mon Sep 17 00:00:00 2001 -From: Ivo van Doorn <IvDoorn@gmail.com> -Date: Thu, 22 Jan 2009 21:16:08 +0100 -Subject: [PATCH] rt2x00: Update chipset ID handling (rt2800pci) - -Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> ---- - drivers/net/wireless/rt2x00/rt2800pci.c | 22 ++++++++++++++++------ - drivers/net/wireless/rt2x00/rt2800pci.h | 8 +++++--- - 2 files changed, 21 insertions(+), 9 deletions(-) - ---- a/drivers/net/wireless/rt2x00/rt2800pci.c -+++ b/drivers/net/wireless/rt2x00/rt2800pci.c -@@ -984,7 +984,7 @@ static void rt2800pci_reset_tuner(struct - static void rt2800pci_link_tuner(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual, const u32 count) - { -- if (rt2x00_rev(&rt2x00dev->chip) == RT2860_VERSION_C) -+ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) - return; - - /* -@@ -1272,7 +1272,11 @@ static int rt2800pci_init_registers(stru - - rt2x00pci_register_read(rt2x00dev, MAX_LEN_CFG, ®); - rt2x00_set_field32(®, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE); -- rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 1); -+ if (rt2x00_rev(&rt2x00dev->chip) >= RT2880E_VERSION && -+ rt2x00_rev(&rt2x00dev->chip) < RT3070_VERSION) -+ rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 2); -+ else -+ rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 1); - rt2x00_set_field32(®, MAX_LEN_CFG_MIN_PSDU, 0); - rt2x00_set_field32(®, MAX_LEN_CFG_MIN_MPDU, 0); - rt2x00pci_register_write(rt2x00dev, MAX_LEN_CFG, reg); -@@ -1523,12 +1527,12 @@ static int rt2800pci_init_bbp(struct rt2 - rt2800pci_bbp_write(rt2x00dev, 103, 0x00); - rt2800pci_bbp_write(rt2x00dev, 105, 0x05); - -- if (rt2x00_rev(&rt2x00dev->chip) == RT2860_VERSION_C) { -+ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) { - rt2800pci_bbp_write(rt2x00dev, 69, 0x16); - rt2800pci_bbp_write(rt2x00dev, 73, 0x12); - } - -- if (rt2x00_rev(&rt2x00dev->chip) == RT2860_VERSION_D) -+ if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION) - rt2800pci_bbp_write(rt2x00dev, 84, 0x19); - - for (i = 0; i < EEPROM_BBP_SIZE; i++) { -@@ -1637,6 +1641,11 @@ static int rt2800pci_enable_radio(struct - /* - * Enable RX. - */ -+ rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, ®); -+ rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1); -+ rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 0); -+ rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg); -+ - rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); - rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1); - rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1); -@@ -2253,13 +2262,14 @@ static int rt2800pci_init_eeprom(struct - PCI_CONFIG_HEADER_DEVICE, &device); - value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); - rt2x00pci_register_read(rt2x00dev, MAC_CSR0, ®); -- reg = rt2x00_get_field32(reg, MAC_CSR0_ASIC_REV); - rt2x00_set_chip(rt2x00dev, device, value, reg); - - if (!rt2x00_rf(&rt2x00dev->chip, RF2820) && - !rt2x00_rf(&rt2x00dev->chip, RF2850) && - !rt2x00_rf(&rt2x00dev->chip, RF2720) && -- !rt2x00_rf(&rt2x00dev->chip, RF2750)) { -+ !rt2x00_rf(&rt2x00dev->chip, RF2750) && -+ !rt2x00_rf(&rt2x00dev->chip, RF3020) && -+ !rt2x00_rf(&rt2x00dev->chip, RF2020)) { - ERROR(rt2x00dev, "Invalid RF chipset detected.\n"); - return -ENODEV; - } ---- a/drivers/net/wireless/rt2x00/rt2800pci.h -+++ b/drivers/net/wireless/rt2x00/rt2800pci.h -@@ -47,9 +47,11 @@ - /* - * RT2860 version - */ --#define RT2860_VERSION_C 0x0100 --#define RT2860_VERSION_D 0x0101 --#define RT2860_VERSION_E 0x0200 -+#define RT2860C_VERSION 0x28600100 -+#define RT2860D_VERSION 0x28600101 -+#define RT2880E_VERSION 0x28720200 -+#define RT2883_VERSION 0x28830300 -+#define RT3070_VERSION 0x30700200 - - /* - * Signal information. diff --git a/package/mac80211/patches/327-rt2x00-Add-support-for-rt3070-rt2800usb.patch b/package/mac80211/patches/327-rt2x00-Add-support-for-rt3070-rt2800usb.patch deleted file mode 100644 index e92bcd2..0000000 --- a/package/mac80211/patches/327-rt2x00-Add-support-for-rt3070-rt2800usb.patch +++ /dev/null @@ -1,683 +0,0 @@ -From 84706fce3026650c49c6290e0e6525b45795027c Mon Sep 17 00:00:00 2001 -From: Ivo van Doorn <IvDoorn@gmail.com> -Date: Thu, 22 Jan 2009 21:16:46 +0100 -Subject: [PATCH] rt2x00: Add support for rt3070 (rt2800usb) - -Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> ---- - drivers/net/wireless/rt2x00/rt2800usb.c | 384 +++++++++++++++++++++++++++---- - drivers/net/wireless/rt2x00/rt2800usb.h | 57 +++++- - drivers/net/wireless/rt2x00/rt2x00.h | 6 + - 3 files changed, 404 insertions(+), 43 deletions(-) - ---- a/drivers/net/wireless/rt2x00/rt2800usb.c -+++ b/drivers/net/wireless/rt2x00/rt2800usb.c -@@ -59,6 +59,8 @@ MODULE_PARM_DESC(nohwcrypt, "Disable har - */ - #define WAIT_FOR_BBP(__dev, __reg) \ - rt2x00usb_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg)) -+#define WAIT_FOR_RFCSR(__dev, __reg) \ -+ rt2x00usb_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg)) - #define WAIT_FOR_RF(__dev, __reg) \ - rt2x00usb_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg)) - #define WAIT_FOR_MCU(__dev, __reg) \ -@@ -120,6 +122,61 @@ static void rt2800usb_bbp_read(struct rt - mutex_unlock(&rt2x00dev->csr_mutex); - } - -+static void rt2800usb_rfcsr_write(struct rt2x00_dev *rt2x00dev, -+ const unsigned int word, const u8 value) -+{ -+ u32 reg; -+ -+ mutex_lock(&rt2x00dev->csr_mutex); -+ -+ /* -+ * Wait until the RFCSR becomes available, afterwards we -+ * can safely write the new data into the register. -+ */ -+ if (WAIT_FOR_RFCSR(rt2x00dev, ®)) { -+ reg = 0; -+ rt2x00_set_field32(®, RF_CSR_CFG_DATA, value); -+ rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); -+ rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 1); -+ rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); -+ -+ rt2x00usb_register_write_lock(rt2x00dev, RF_CSR_CFG, reg); -+ } -+ -+ mutex_unlock(&rt2x00dev->csr_mutex); -+} -+ -+static void rt2800usb_rfcsr_read(struct rt2x00_dev *rt2x00dev, -+ const unsigned int word, u8 *value) -+{ -+ u32 reg; -+ -+ mutex_lock(&rt2x00dev->csr_mutex); -+ -+ /* -+ * Wait until the RFCSR becomes available, afterwards we -+ * can safely write the read request into the register. -+ * After the data has been written, we wait until hardware -+ * returns the correct value, if at any time the register -+ * doesn't become available in time, reg will be 0xffffffff -+ * which means we return 0xff to the caller. -+ */ -+ if (WAIT_FOR_RFCSR(rt2x00dev, ®)) { -+ reg = 0; -+ rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); -+ rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 0); -+ rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); -+ -+ rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg); -+ -+ WAIT_FOR_RFCSR(rt2x00dev, ®); -+ } -+ -+ *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA); -+ -+ mutex_unlock(&rt2x00dev->csr_mutex); -+} -+ - static void rt2800usb_rf_write(struct rt2x00_dev *rt2x00dev, - const unsigned int word, const u32 value) - { -@@ -635,42 +692,24 @@ static void rt2800usb_config_lna_gain(st - rt2x00dev->lna_gain = lna_gain; - } - --static void rt2800usb_config_channel(struct rt2x00_dev *rt2x00dev, -- struct rf_channel *rf, -- struct channel_info *info) -+static void rt2800usb_config_channel_rt2x(struct rt2x00_dev *rt2x00dev, -+ struct rf_channel *rf, -+ struct channel_info *info) - { -- u32 reg; -- unsigned int tx_pin; - u16 eeprom; - -- tx_pin = 0; -- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1); -- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1); -- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1); -- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1); -- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1); -- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1); -- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1); -- - rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset); - - /* - * Determine antenna settings from EEPROM - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); -- if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1) { -+ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1) - rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1); -- /* Turn off unused PA or LNA when only 1T or 1R */ -- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 0); -- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 0); -- } - - if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) == 1) { - rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1); - rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1); -- /* Turn off unused PA or LNA when only 1T or 1R */ -- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 0); -- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 0); - } else if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) == 2) - rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1); - -@@ -698,15 +737,11 @@ static void rt2800usb_config_channel(str - - rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A, - TXPOWER_A_TO_DEV(info->tx_power2)); -- -- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, 1); - } else { - rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G, - TXPOWER_G_TO_DEV(info->tx_power1)); - rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G, - TXPOWER_G_TO_DEV(info->tx_power2)); -- -- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, 1); - } - - rt2x00_set_field32(&rf->rf4, RF4_BW40, -@@ -730,6 +765,81 @@ static void rt2800usb_config_channel(str - rt2800usb_rf_write(rt2x00dev, 2, rf->rf2); - rt2800usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); - rt2800usb_rf_write(rt2x00dev, 4, rf->rf4); -+} -+ -+static void rt2800usb_config_channel_rt3x(struct rt2x00_dev *rt2x00dev, -+ struct rf_channel *rf, -+ struct channel_info *info) -+{ -+ u8 rfcsr; -+ -+ rt2800usb_rfcsr_write(rt2x00dev, 2, rf->rf1); -+ rt2800usb_rfcsr_write(rt2x00dev, 2, rf->rf3); -+ -+ rt2800usb_rfcsr_read(rt2x00dev, 6, &rfcsr); -+ rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2); -+ rt2800usb_rfcsr_write(rt2x00dev, 6, rfcsr); -+ -+ rt2800usb_rfcsr_read(rt2x00dev, 12, &rfcsr); -+ rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER, -+ TXPOWER_G_TO_DEV(info->tx_power1)); -+ rt2800usb_rfcsr_write(rt2x00dev, 12, rfcsr); -+ -+ rt2800usb_rfcsr_read(rt2x00dev, 23, &rfcsr); -+ rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset); -+ rt2800usb_rfcsr_write(rt2x00dev, 23, rfcsr); -+ -+ if (test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)) -+ rt2800usb_rfcsr_write(rt2x00dev, 24, rt2x00dev->calibration_bw40); -+ else -+ rt2800usb_rfcsr_write(rt2x00dev, 24, rt2x00dev->calibration_bw20); -+ -+ rt2800usb_rfcsr_read(rt2x00dev, 23, &rfcsr); -+ rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1); -+ rt2800usb_rfcsr_write(rt2x00dev, 23, rfcsr); -+} -+ -+static void rt2800usb_config_channel(struct rt2x00_dev *rt2x00dev, -+ struct rf_channel *rf, -+ struct channel_info *info) -+{ -+ u32 reg; -+ unsigned int tx_pin; -+ u16 eeprom; -+ -+ if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION) -+ rt2800usb_config_channel_rt2x(rt2x00dev, rf, info); -+ else -+ rt2800usb_config_channel_rt3x(rt2x00dev, rf, info); -+ -+ tx_pin = 0; -+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1); -+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1); -+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1); -+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1); -+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1); -+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1); -+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1); -+ -+ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); -+ -+ /* Turn off unused PA or LNA when only 1T or 1R */ -+ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1) { -+ -+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 0); -+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 0); -+ } -+ -+ /* Turn off unused PA or LNA when only 1T or 1R */ -+ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) == 1) { -+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 0); -+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 0); -+ } -+ -+ if (rf->channel > 14) -+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, 1); -+ else -+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, 1); - - /* - * Change BBP settings -@@ -935,8 +1045,12 @@ static void rt2800usb_link_stats(struct - - static u8 rt2800usb_get_default_vgc(struct rt2x00_dev *rt2x00dev) - { -- if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) -- return 0x2e + rt2x00dev->lna_gain; -+ if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) { -+ if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) -+ return 0x1c + (2 * rt2x00dev->lna_gain); -+ else -+ return 0x2e + rt2x00dev->lna_gain; -+ } - - if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)) - return 0x32 + (rt2x00dev->lna_gain * 5) / 3; -@@ -964,7 +1078,7 @@ static void rt2800usb_reset_tuner(struct - static void rt2800usb_link_tuner(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual, const u32 count) - { -- if (rt2x00_rev(&rt2x00dev->chip) == RT2870_VERSION_C) -+ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) - return; - - /* -@@ -1145,8 +1259,14 @@ static int rt2800usb_init_registers(stru - rt2x00_set_field32(®, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0); - rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg); - -- rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00040a06); -- rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606); -+ if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) { -+ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400); -+ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000); -+ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000); -+ } else { -+ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00040a06); -+ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606); -+ } - - rt2x00usb_register_read(rt2x00dev, TX_LINK_CFG, ®); - rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFB_LIFETIME, 32); -@@ -1166,7 +1286,11 @@ static int rt2800usb_init_registers(stru - - rt2x00usb_register_read(rt2x00dev, MAX_LEN_CFG, ®); - rt2x00_set_field32(®, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE); -- rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 1); -+ if (rt2x00_rev(&rt2x00dev->chip) >= RT2880E_VERSION && -+ rt2x00_rev(&rt2x00dev->chip) < RT3070_VERSION) -+ rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 2); -+ else -+ rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 1); - rt2x00_set_field32(®, MAX_LEN_CFG_MIN_PSDU, 0); - rt2x00_set_field32(®, MAX_LEN_CFG_MIN_MPDU, 0); - rt2x00usb_register_write(rt2x00dev, MAX_LEN_CFG, reg); -@@ -1427,13 +1551,16 @@ static int rt2800usb_init_bbp(struct rt2 - rt2800usb_bbp_write(rt2x00dev, 103, 0x00); - rt2800usb_bbp_write(rt2x00dev, 105, 0x05); - -- if (rt2x00_rev(&rt2x00dev->chip) == RT2870_VERSION_C) { -+ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) { - rt2800usb_bbp_write(rt2x00dev, 69, 0x16); - rt2800usb_bbp_write(rt2x00dev, 73, 0x12); - } - -- if (rt2x00_rev(&rt2x00dev->chip) != RT2870_VERSION_D) -- rt2800usb_bbp_write(rt2x00dev, 84, 0x19); -+ if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) { -+ rt2800usb_bbp_write(rt2x00dev, 70, 0x0a); -+ rt2800usb_bbp_write(rt2x00dev, 84, 0x99); -+ rt2800usb_bbp_write(rt2x00dev, 105, 0x05); -+ } - - for (i = 0; i < EEPROM_BBP_SIZE; i++) { - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); -@@ -1448,6 +1575,134 @@ static int rt2800usb_init_bbp(struct rt2 - return 0; - } - -+static u8 rt2800usb_init_rx_filter(struct rt2x00_dev *rt2x00dev, -+ bool bw40, u8 rfcsr24, u8 filter_target) -+{ -+ unsigned int i; -+ u8 bbp; -+ u8 rfcsr; -+ u8 passband; -+ u8 stopband; -+ u8 overtuned = 0; -+ -+ rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24); -+ -+ if (bw40) { -+ rt2800usb_bbp_read(rt2x00dev, 4, &bbp); -+ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0x10); -+ rt2800usb_bbp_write(rt2x00dev, 4, bbp); -+ } -+ -+ rt2800usb_rfcsr_read(rt2x00dev, 22, &rfcsr); -+ rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1); -+ rt2800usb_rfcsr_write(rt2x00dev, 22, rfcsr); -+ -+ /* -+ * Set power & frequency of passband test tone -+ */ -+ rt2800usb_bbp_write(rt2x00dev, 24, 0); -+ -+ for (i = 0; i < 100; i++) { -+ rt2800usb_bbp_write(rt2x00dev, 25, 0x90); -+ msleep(1); -+ -+ rt2800usb_bbp_read(rt2x00dev, 55, &passband); -+ if (passband) -+ break; -+ } -+ -+ /* -+ * Set power & frequency of stopband test tone -+ */ -+ rt2800usb_bbp_write(rt2x00dev, 24, 0x06); -+ -+ for (i = 0; i < 100; i++) { -+ rt2800usb_bbp_write(rt2x00dev, 25, 0x90); -+ msleep(1); -+ -+ rt2800usb_bbp_read(rt2x00dev, 55, &stopband); -+ -+ if ((passband - stopband) <= filter_target) { -+ rfcsr24++; -+ overtuned += ((passband - stopband) == filter_target); -+ } else -+ break; -+ -+ rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24); -+ } -+ -+ rfcsr24 -= !!overtuned; -+ -+ rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24); -+ return rfcsr24; -+} -+ -+static int rt2800usb_init_rfcsr(struct rt2x00_dev *rt2x00dev) -+{ -+ u8 rfcsr; -+ u8 bbp; -+ -+ if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION) -+ return 0; -+ -+ /* -+ * Init RF calibration. -+ */ -+ rt2800usb_rfcsr_read(rt2x00dev, 30, &rfcsr); -+ rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1); -+ rt2800usb_rfcsr_write(rt2x00dev, 30, rfcsr); -+ msleep(1); -+ rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0); -+ rt2800usb_rfcsr_write(rt2x00dev, 30, rfcsr); -+ -+ rt2800usb_rfcsr_write(rt2x00dev, 4, 0x40); -+ rt2800usb_rfcsr_write(rt2x00dev, 5, 0x03); -+ rt2800usb_rfcsr_write(rt2x00dev, 6, 0x02); -+ rt2800usb_rfcsr_write(rt2x00dev, 7, 0x70); -+ rt2800usb_rfcsr_write(rt2x00dev, 9, 0x0f); -+ rt2800usb_rfcsr_write(rt2x00dev, 10, 0x71); -+ rt2800usb_rfcsr_write(rt2x00dev, 11, 0x21); -+ rt2800usb_rfcsr_write(rt2x00dev, 12, 0x7b); -+ rt2800usb_rfcsr_write(rt2x00dev, 14, 0x90); -+ rt2800usb_rfcsr_write(rt2x00dev, 15, 0x58); -+ rt2800usb_rfcsr_write(rt2x00dev, 16, 0xb3); -+ rt2800usb_rfcsr_write(rt2x00dev, 17, 0x92); -+ rt2800usb_rfcsr_write(rt2x00dev, 18, 0x2c); -+ rt2800usb_rfcsr_write(rt2x00dev, 19, 0x02); -+ rt2800usb_rfcsr_write(rt2x00dev, 20, 0xba); -+ rt2800usb_rfcsr_write(rt2x00dev, 21, 0xdb); -+ rt2800usb_rfcsr_write(rt2x00dev, 24, 0x16); -+ rt2800usb_rfcsr_write(rt2x00dev, 25, 0x01); -+ rt2800usb_rfcsr_write(rt2x00dev, 27, 0x03); -+ rt2800usb_rfcsr_write(rt2x00dev, 29, 0x1f); -+ -+ /* -+ * Set RX Filter calibration for 20MHz and 40MHz -+ */ -+ rt2x00dev->calibration_bw20 = -+ rt2800usb_init_rx_filter(rt2x00dev, false, 0x07, 0x16); -+ rt2x00dev->calibration_bw40 = -+ rt2800usb_init_rx_filter(rt2x00dev, true, 0x27, 0x19); -+ -+ /* -+ * Set back to initial state -+ */ -+ rt2800usb_bbp_write(rt2x00dev, 24, 0); -+ -+ rt2800usb_rfcsr_read(rt2x00dev, 22, &rfcsr); -+ rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0); -+ rt2800usb_rfcsr_write(rt2x00dev, 22, rfcsr); -+ -+ /* -+ * set BBP back to BW20 -+ */ -+ rt2800usb_bbp_read(rt2x00dev, 4, &bbp); -+ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0); -+ rt2800usb_bbp_write(rt2x00dev, 4, bbp); -+ -+ return 0; -+} -+ - /* - * Device state switch handlers. - */ -@@ -1491,7 +1746,8 @@ static int rt2800usb_enable_radio(struct - */ - if (unlikely(rt2800usb_wait_wpdma_ready(rt2x00dev) || - rt2800usb_init_registers(rt2x00dev) || -- rt2800usb_init_bbp(rt2x00dev))) -+ rt2800usb_init_bbp(rt2x00dev) || -+ rt2800usb_init_rfcsr(rt2x00dev))) - return -EIO; - - rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, ®); -@@ -1982,7 +2238,6 @@ static int rt2800usb_validate_eeprom(str - static int rt2800usb_init_eeprom(struct rt2x00_dev *rt2x00dev) - { - u32 reg; -- u16 rev; - u16 value; - u16 eeprom; - -@@ -1996,8 +2251,7 @@ static int rt2800usb_init_eeprom(struct - */ - value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); - rt2x00usb_register_read(rt2x00dev, MAC_CSR0, ®); -- rev = rt2x00_get_field32(reg, MAC_CSR0_ASIC_REV); -- rt2x00_set_chip(rt2x00dev, RT2870, value, rev); -+ rt2x00_set_chip(rt2x00dev, RT2870, value, reg); - - /* - * The check for rt2860 is not a typo, some rt2870 hardware -@@ -2012,7 +2266,9 @@ static int rt2800usb_init_eeprom(struct - if (!rt2x00_rf(&rt2x00dev->chip, RF2820) && - !rt2x00_rf(&rt2x00dev->chip, RF2850) && - !rt2x00_rf(&rt2x00dev->chip, RF2720) && -- !rt2x00_rf(&rt2x00dev->chip, RF2750)) { -+ !rt2x00_rf(&rt2x00dev->chip, RF2750) && -+ !rt2x00_rf(&rt2x00dev->chip, RF3020) && -+ !rt2x00_rf(&rt2x00dev->chip, RF2020)) { - ERROR(rt2x00dev, "Invalid RF chipset detected.\n"); - return -ENODEV; - } -@@ -2127,6 +2383,27 @@ static const struct rf_channel rf_vals[] - { 216, 0x15002ccc, 0x15004982, 0x1509be55, 0x150c0a23 }, - }; - -+/* -+ * RF value list for rt3070 -+ * Supports: 2.4 GHz -+ */ -+static const struct rf_channel rf_vals_3070[] = { -+ {1, 241, 2, 2 }, -+ {2, 241, 2, 7 }, -+ {3, 242, 2, 2 }, -+ {4, 242, 2, 7 }, -+ {5, 243, 2, 2 }, -+ {6, 243, 2, 7 }, -+ {7, 244, 2, 2 }, -+ {8, 244, 2, 7 }, -+ {9, 245, 2, 2 }, -+ {10, 245, 2, 7 }, -+ {11, 246, 2, 2 }, -+ {12, 246, 2, 7 }, -+ {13, 247, 2, 2 }, -+ {14, 248, 2, 4 }, -+}; -+ - static int rt2800usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) - { - struct hw_mode_spec *spec = &rt2x00dev->spec; -@@ -2184,6 +2461,10 @@ static int rt2800usb_probe_hw_mode(struc - spec->supported_bands |= SUPPORT_BAND_5GHZ; - spec->num_channels = ARRAY_SIZE(rf_vals); - spec->channels = rf_vals; -+ } else if (rt2x00_rf(&rt2x00dev->chip, RF3020) || -+ rt2x00_rf(&rt2x00dev->chip, RF2020)) { -+ spec->num_channels = ARRAY_SIZE(rf_vals_3070); -+ spec->channels = rf_vals_3070; - } - - /* -@@ -2473,6 +2754,12 @@ static const struct rt2x00_ops rt2800usb - * rt2800usb module information. - */ - static struct usb_device_id rt2800usb_device_table[] = { -+ /* Abocom */ -+ { USB_DEVICE(0x07b8, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) }, -+ { USB_DEVICE(0x07b8, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) }, -+ { USB_DEVICE(0x07b8, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) }, -+ { USB_DEVICE(0x07b8, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) }, -+ { USB_DEVICE(0x1482, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) }, - /* Amit */ - { USB_DEVICE(0x15c5, 0x0008), USB_DEVICE_DATA(&rt2800usb_ops) }, - /* ASUS */ -@@ -2483,9 +2770,12 @@ static struct usb_device_id rt2800usb_de - { USB_DEVICE(0x13d3, 0x3247), USB_DEVICE_DATA(&rt2800usb_ops) }, - /* Belkin */ - { USB_DEVICE(0x050d, 0x8053), USB_DEVICE_DATA(&rt2800usb_ops) }, -+ { USB_DEVICE(0x050d, 0x805c), USB_DEVICE_DATA(&rt2800usb_ops) }, - /* Conceptronic */ - { USB_DEVICE(0x14b2, 0x3c06), USB_DEVICE_DATA(&rt2800usb_ops) }, - { USB_DEVICE(0x14b2, 0x3c07), USB_DEVICE_DATA(&rt2800usb_ops) }, -+ { USB_DEVICE(0x14b2, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) }, -+ { USB_DEVICE(0x14b2, 0x3c12), USB_DEVICE_DATA(&rt2800usb_ops) }, - { USB_DEVICE(0x14b2, 0x3c23), USB_DEVICE_DATA(&rt2800usb_ops) }, - { USB_DEVICE(0x14b2, 0x3c25), USB_DEVICE_DATA(&rt2800usb_ops) }, - { USB_DEVICE(0x14b2, 0x3c27), USB_DEVICE_DATA(&rt2800usb_ops) }, -@@ -2494,9 +2784,12 @@ static struct usb_device_id rt2800usb_de - { USB_DEVICE(0x07aa, 0x002f), USB_DEVICE_DATA(&rt2800usb_ops) }, - { USB_DEVICE(0x07aa, 0x003c), USB_DEVICE_DATA(&rt2800usb_ops) }, - { USB_DEVICE(0x07aa, 0x003f), USB_DEVICE_DATA(&rt2800usb_ops) }, -+ { USB_DEVICE(0x18c5, 0x0012), USB_DEVICE_DATA(&rt2800usb_ops) }, - /* D-Link */ - { USB_DEVICE(0x07d1, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) }, - { USB_DEVICE(0x07d1, 0x3c11), USB_DEVICE_DATA(&rt2800usb_ops) }, -+ /* Edimax */ -+ { USB_DEVICE(0x7392, 0x7711), USB_DEVICE_DATA(&rt2800usb_ops) }, - /* EnGenius */ - { USB_DEVICE(0X1740, 0x9701), USB_DEVICE_DATA(&rt2800usb_ops) }, - { USB_DEVICE(0x1740, 0x9702), USB_DEVICE_DATA(&rt2800usb_ops) }, -@@ -2507,13 +2800,21 @@ static struct usb_device_id rt2800usb_de - { USB_DEVICE(0x0e66, 0x0003), USB_DEVICE_DATA(&rt2800usb_ops) }, - /* Linksys */ - { USB_DEVICE(0x1737, 0x0071), USB_DEVICE_DATA(&rt2800usb_ops) }, -+ /* Logitec */ -+ { USB_DEVICE(0x0789, 0x0162), USB_DEVICE_DATA(&rt2800usb_ops) }, -+ { USB_DEVICE(0x0789, 0x0163), USB_DEVICE_DATA(&rt2800usb_ops) }, -+ { USB_DEVICE(0x0789, 0x0164), USB_DEVICE_DATA(&rt2800usb_ops) }, - /* Philips */ - { USB_DEVICE(0x0471, 0x200f), USB_DEVICE_DATA(&rt2800usb_ops) }, - /* Planex */ - { USB_DEVICE(0x2019, 0xed06), USB_DEVICE_DATA(&rt2800usb_ops) }, -+ { USB_DEVICE(0x2019, 0xab25), USB_DEVICE_DATA(&rt2800usb_ops) }, - /* Ralink */ - { USB_DEVICE(0x148f, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) }, - { USB_DEVICE(0x148f, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) }, -+ { USB_DEVICE(0x148f, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) }, -+ /* Samsung */ -+ { USB_DEVICE(0x04e8, 0x2018), USB_DEVICE_DATA(&rt2800usb_ops) }, - /* Siemens */ - { USB_DEVICE(0x129b, 0x1828), USB_DEVICE_DATA(&rt2800usb_ops) }, - /* Sitecom */ -@@ -2533,6 +2834,9 @@ static struct usb_device_id rt2800usb_de - /* ZCOM */ - { USB_DEVICE(0x0cde, 0x0022), USB_DEVICE_DATA(&rt2800usb_ops) }, - { USB_DEVICE(0x0cde, 0x0025), USB_DEVICE_DATA(&rt2800usb_ops) }, -+ /* Zinwell */ -+ { USB_DEVICE(0x5a57, 0x0280), USB_DEVICE_DATA(&rt2800usb_ops) }, -+ { USB_DEVICE(0x5a57, 0x0282), USB_DEVICE_DATA(&rt2800usb_ops) }, - /* Zyxel */ - { USB_DEVICE(0x0586, 0x3416), USB_DEVICE_DATA(&rt2800usb_ops) }, - { 0, } ---- a/drivers/net/wireless/rt2x00/rt2800usb.h -+++ b/drivers/net/wireless/rt2x00/rt2800usb.h -@@ -47,9 +47,11 @@ - /* - * RT2870 version - */ --#define RT2870_VERSION_C 0x0100 --#define RT2870_VERSION_D 0x0101 --#define RT2870_VERSION_E 0x0200 -+#define RT2860C_VERSION 0x28600100 -+#define RT2860D_VERSION 0x28600101 -+#define RT2880E_VERSION 0x28720200 -+#define RT2883_VERSION 0x28830300 -+#define RT3070_VERSION 0x30700200 - - /* - * Signal information. -@@ -383,6 +385,15 @@ - #define PBF_DBG 0x043c - - /* -+ * RF registers -+ */ -+#define RF_CSR_CFG 0x0500 -+#define RF_CSR_CFG_DATA FIELD32(0x000000ff) -+#define RF_CSR_CFG_REGNUM FIELD32(0x00001f00) -+#define RF_CSR_CFG_WRITE FIELD32(0x00010000) -+#define RF_CSR_CFG_BUSY FIELD32(0x00020000) -+ -+/* - * MAC Control/Status Registers(CSR). - * Some values are set in TU, whereas 1 TU == 1024 us. - */ -@@ -1482,6 +1493,46 @@ struct hw_key_entry { - #define BBP3_RX_ANTENNA FIELD8(0x18) - - /* -+ * BBP 4: Bandwidth -+ */ -+#define BBP4_BANDWIDTH FIELD8(0x18) -+ -+/* -+ * RFCSR registers -+ * The wordsize of the RFCSR is 8 bits. -+ */ -+ -+/* -+ * RFCSR 6: -+ */ -+#define RFCSR6_R FIELD8(0x03) -+ -+/* -+ * RFCSR 7: -+ */ -+#define RFCSR7_RF_TUNING FIELD8(0x01) -+ -+/* -+ * RFCSR 12: -+ */ -+#define RFCSR12_TX_POWER FIELD8(0x1f) -+ -+/* -+ * RFCSR 22: -+ */ -+#define RFCSR22_BASEBAND_LOOPBACK FIELD8(0x01) -+ -+/* -+ * RFCSR 23: -+ */ -+#define RFCSR23_FREQ_OFFSET FIELD8(0x7f) -+ -+/* -+ * RFCSR 30: -+ */ -+#define RFCSR30_RF_CALIBRATION FIELD8(0x80) -+ -+/* - * RF registers - */ - ---- a/drivers/net/wireless/rt2x00/rt2x00.h -+++ b/drivers/net/wireless/rt2x00/rt2x00.h -@@ -780,6 +780,12 @@ struct rt2x00_dev { - u8 freq_offset; - - /* -+ * Calibration information (for rt2800usb). -+ */ -+ u8 calibration_bw20; -+ u8 calibration_bw40; -+ -+ /* - * Low level statistics which will have - * to be kept up to date while device is running. - */ diff --git a/package/mac80211/patches/329-rt2x00-Add-support-for-2-firmware-file-lengths-rt2.patch b/package/mac80211/patches/329-rt2x00-Add-support-for-2-firmware-file-lengths-rt2.patch deleted file mode 100644 index b05843d..0000000 --- a/package/mac80211/patches/329-rt2x00-Add-support-for-2-firmware-file-lengths-rt2.patch +++ /dev/null @@ -1,58 +0,0 @@ -From cac151e6e6aa50ecb5d965aa5e2840d0e69f8efa Mon Sep 17 00:00:00 2001 -From: Ivo van Doorn <IvDoorn@gmail.com> -Date: Thu, 22 Jan 2009 22:02:32 +0100 -Subject: [PATCH] rt2x00: Add support for 2 firmware file lengths (rt2800usb) - -Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> ---- - drivers/net/wireless/rt2x00/rt2800usb.c | 32 +++++++++++++++++++++++++++++- - 1 files changed, 30 insertions(+), 2 deletions(-) - ---- a/drivers/net/wireless/rt2x00/rt2800usb.c -+++ b/drivers/net/wireless/rt2x00/rt2800usb.c -@@ -1128,6 +1128,34 @@ static int rt2800usb_load_firmware(struc - unsigned int i; - int status; - u32 reg; -+ u32 offset; -+ u32 length; -+ u16 chipset = (rt2x00_rev(&rt2x00dev->chip) >> 16) & 0xffff; -+ -+ /* -+ * Firmware files: -+ * There are 2 variations of the rt2870 firmware. -+ * a) size: 4kb -+ * b) size: 8kb -+ * Note that (b) contains 2 seperate firmware blobs of 4k -+ * within the file. The first blob is the same firmware as (a), -+ * but the second blob is for the additional chipsets. -+ */ -+ if (len < 4096) { -+ ERROR(rt2x00dev, "Unsupported firmware file (len=%zu)\n", len); -+ return -ENOENT; -+ } -+ -+ if ((chipset == 0x2860) || (chipset == 0x2872) || (chipset == 0x3070)) { -+ offset = 0; -+ length = 4096; -+ } else if (len == 8192) { -+ offset = 4096; -+ length = 4096; -+ } else { -+ ERROR(rt2x00dev, "Unsupported firmware file (len=%zu)\n", len); -+ return -ENOENT; -+ } - - /* - * Wait for stable hardware. -@@ -1150,8 +1178,8 @@ static int rt2800usb_load_firmware(struc - rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, - FIRMWARE_IMAGE_BASE, -- data, len, -- REGISTER_TIMEOUT32(len)); -+ data + offset, length, -+ REGISTER_TIMEOUT32(length)); - - rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0); - rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0); |