diff options
Diffstat (limited to 'package/mac80211')
| -rw-r--r-- | package/mac80211/Makefile | 1 | ||||
| -rw-r--r-- | package/mac80211/patches/001-disable_drivers.patch | 142 |
2 files changed, 143 insertions, 0 deletions
diff --git a/package/mac80211/Makefile b/package/mac80211/Makefile index 7cf97ef..fb01c76 100644 --- a/package/mac80211/Makefile +++ b/package/mac80211/Makefile @@ -171,6 +171,7 @@ define Build/Prepare rm -rf $(PKG_BUILD_DIR) mkdir -p $(PKG_BUILD_DIR) $(PKG_UNPACK) + $(Build/Patch) $(if $(QUILT),touch $(PKG_BUILD_DIR)/.quilt_used) unzip -jod $(PKG_BUILD_DIR) $(DL_DIR)/$(RT61FW) unzip -jod $(PKG_BUILD_DIR) $(DL_DIR)/$(RT71FW) diff --git a/package/mac80211/patches/001-disable_drivers.patch b/package/mac80211/patches/001-disable_drivers.patch new file mode 100644 index 0000000..53bc0a9 --- /dev/null +++ b/package/mac80211/patches/001-disable_drivers.patch @@ -0,0 +1,142 @@ +diff -urN compat-wireless-2008-04-07/config.mk compat-wireless-2008-04-07.new/config.mk +--- compat-wireless-2008-04-07/config.mk 2008-03-14 16:22:22.000000000 +0100 ++++ compat-wireless-2008-04-07.new/config.mk 2008-04-09 21:17:03.000000000 +0200 +@@ -28,66 +28,6 @@ + # PCI Drivers + ifneq ($(CONFIG_PCI),) + +-CONFIG_ATH5K=m +-CONFIG_ATH5K_DEBUG=n +-CONFIG_IWLCORE=m +-CONFIG_IWL3945=m +-CONFIG_IWL4965=m +-CONFIG_IWL4965_HT=y +-CONFIG_B43=m +-# B43 uses PCMCIA only for Compact Flash. The Cardbus cards uses PCI +-# Example, bcm4318: +-# http://www.multicap.biz/wireless-lan/indoor-wlan-hardware/sdc-cf10g-80211g-compact-flash-module +-CONFIG_B43_PCMCIA=y +-CONFIG_B43_DMA=y +-CONFIG_B43_PIO=y +-CONFIG_B43_DMA_AND_PIO_MODE=y +-CONFIG_B43_PCI_AUTOSELECT=y +-CONFIG_B43_PCICORE_AUTOSELECT=y +-#CONFIG_B43_RFKILL=n +-CONFIG_B43_LEDS=y +-# CONFIG_B43_DEBUG is not set +- +-CONFIG_B43LEGACY=m +-CONFIG_B43LEGACY_PCI_AUTOSELECT=y +-CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y +-CONFIG_B43LEGACY_DMA=y +-CONFIG_B43LEGACY_PIO=y +-CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y +- +-# The Intel ipws +-CONFIG_IPW2100=m +-CONFIG_IPW2100_MONITOR=y +-CONFIG_IPW2200=m +-CONFIG_IPW2200_MONITOR=y +-CONFIG_IPW2200_RADIOTAP=y +-CONFIG_IPW2200_PROMISCUOUS=y +-# The above enables use a second interface prefixed 'rtap'. +-# Example usage: +-# +-# % modprobe ipw2200 rtap_iface=1 +-# % ifconfig rtap0 up +-# % tethereal -i rtap0 +-# +-# If you do not specify 'rtap_iface=1' as a module parameter then +-# the rtap interface will not be created and you will need to turn +-# it on via sysfs: +-# +-# % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface +-CONFIG_IPW2200_QOS=y +- +-NEED_IEEE80211=y +- +-CONFIG_P54_PCI=m +- +-CONFIG_SSB_PCIHOST_POSSIBLE=y +-CONFIG_SSB_PCIHOST=y +-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y +-CONFIG_SSB_DRIVER_PCICORE=y +- +-CONFIG_RTL8180=m +-CONFIG_ADM8211=m +- + CONFIG_RT2X00_LIB_PCI=m + CONFIG_RT2400PCI=m + CONFIG_RT2500PCI=m +@@ -109,31 +49,6 @@ + + # USB Drivers + ifneq ($(CONFIG_USB),) +-CONFIG_ZD1211RW=m +- +-# support for USB Wireless devices using Atmel at76c503, +-# at76c505 or at76c505a chips. +-CONFIG_USB_ATMEL=m +- +-# Stuff here things which depend on kernel versions for USB +-ifeq ($(shell test -e $(KLIB_BUILD)/Makefile && echo yes),yes) +-ifeq ($(shell test $(shell sed 's/^SUBLEVEL = //;t;d' < $(KLIB_BUILD)/Makefile) -gt 21 && echo yes),yes) +- +-# Sorry, rndis_wlan uses cancel_work_sync which is new and can't be done in compat... +- +-# Wireless RNDIS USB support (RTL8185 802.11g) A-Link WL54PC +-# All of these devices are based on Broadcom 4320 chip which +-# is only wireless RNDIS chip known to date. +-# Note: this depends on CONFIG_USB_NET_RNDIS_HOST and CONFIG_USB_NET_CDCETHER +-# it also requires a new RNDIS_HOST module which we add +-CONFIG_USB_NET_RNDIS_HOST=m +-CONFIG_USB_NET_RNDIS_WLAN=m +- +-endif +-endif +- +-CONFIG_P54_USB=m +-CONFIG_RTL8187=m + + # RT2500USB does not require firmware + CONFIG_RT2500USB=m +@@ -159,39 +74,6 @@ + CONFIG_RT2X00_LIB_FIRMWARE=y + endif + +-# p54 +-CONFIG_P54_COMMON=m +- +-# Sonics Silicon Backplane +-CONFIG_SSB_POSSIBLE=y +-CONFIG_SSB=m +-CONFIG_SSB_SPROM=y +- +-ifneq ($(CONFIG_PCMCIA),) +-CONFIG_SSB_PCMCIAHOST=y +-endif +- +-# These two are for mips +-CONFIG_SSB_DRIVER_MIPS=n +-CONFIG_SSB_PCICORE_HOSTMODE=n +-# CONFIG_SSB_DEBUG is not set +-# CONFIG_SSB_DRIVER_EXTIF=y +- +-ifneq ($(CONFIG_USB),) +-CONFIG_LIBERTAS_USB=m +-NEED_LIBERTAS=y +-endif +-ifneq ($(CONFIG_PCMCIA),) +-CONFIG_LIBERTAS_CS=m +-NEED_LIBERTAS=y +-endif +-ifeq ($(NEED_LIBERTAS),y) +-CONFIG_LIBERTAS=m +-# Libertas uses the old stack but not fully, it will soon +-# be cleaned. +-NEED_IEEE80211=y +-endif +- + ifeq ($(NEED_IEEE80211),y) + # Old ieee80211 "stack" + # Note: old softmac is scheduled for removal so we |