summaryrefslogtreecommitdiff
path: root/package/network/utils/uqmi
diff options
context:
space:
mode:
Diffstat (limited to 'package/network/utils/uqmi')
-rw-r--r--package/network/utils/uqmi/Makefile4
-rw-r--r--[-rwxr-xr-x]package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh199
2 files changed, 145 insertions, 58 deletions
diff --git a/package/network/utils/uqmi/Makefile b/package/network/utils/uqmi/Makefile
index 8ca7b85..16e7fea 100644
--- a/package/network/utils/uqmi/Makefile
+++ b/package/network/utils/uqmi/Makefile
@@ -1,13 +1,13 @@
include $(TOPDIR)/rules.mk
PKG_NAME:=uqmi
-PKG_VERSION:=2014-12-03
+PKG_VERSION:=2015-08-13
PKG_RELEASE=$(PKG_SOURCE_VERSION)
PKG_SOURCE_PROTO:=git
PKG_SOURCE_URL:=git://nbd.name/uqmi.git
PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=86bcdb8cca652676a78b2df8b5e3fb27a40c60a4
+PKG_SOURCE_VERSION:=8a97586e9445a60e355dea13aa87885ab3dcb277
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
PKG_MAINTAINER:=Matti Laakso <malaakso@elisanet.fi>
# PKG_MIRROR_MD5SUM:=
diff --git a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
index b416da6..8ee7dbd 100755..100644
--- a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
+++ b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
@@ -17,28 +17,25 @@ proto_qmi_init_config() {
proto_config_add_string pincode
proto_config_add_string delay
proto_config_add_string modes
+ proto_config_add_boolean ipv6
+ proto_config_add_boolean dhcp
}
-qmi_disconnect() {
- # disable previous autoconnect state using the global handle
- # do not reuse previous wds client id to prevent hangs caused by stale data
- uqmi -s -d "$device" \
- --stop-network 0xffffffff \
- --autoconnect > /dev/null
-}
-
-qmi_wds_release() {
- [ -n "$cid" ] || return 0
+proto_qmi_setup() {
+ local interface="$1"
- uqmi -s -d "$device" --set-client-id wds,"$cid" --release-client-id wds
- uci_revert_state network $interface cid
-}
+ local device apn auth username password pincode delay modes ipv6 dhcp
+ local cid_4 pdh_4 cid_6 pdh_6 ipv4
+ local ip subnet gateway dns1 dns2 ip_6 ip_prefix_length gateway_6 dns1_6 dns2_6
+ json_get_vars device apn auth username password pincode delay modes ipv6 dhcp
-_proto_qmi_setup() {
- local interface="$1"
+ ipv4=1
- local device apn auth username password pincode delay modes cid pdh
- json_get_vars device apn auth username password pincode delay modes
+ if [ "$ipv6" = 0 ]; then
+ ipv6=""
+ else
+ ipv6=1
+ fi
[ -n "$ctl_device" ] && device=$ctl_device
@@ -86,8 +83,6 @@ _proto_qmi_setup() {
return 1
}
- qmi_disconnect
-
uqmi -s -d "$device" --set-data-format 802.3
uqmi -s -d "$device" --wda-set-data-format 802.3
@@ -99,67 +94,159 @@ _proto_qmi_setup() {
[ -n "$modes" ] && uqmi -s -d "$device" --set-network-modes "$modes"
echo "Starting network $apn"
- cid=`uqmi -s -d "$device" --get-client-id wds`
+
+ cid_4=`uqmi -s -d "$device" --get-client-id wds`
[ $? -ne 0 ] && {
echo "Unable to obtain client ID"
proto_notify_error "$interface" NO_CID
return 1
}
- uqmi -s -d "$device" --set-client-id wds,"$cid" \
+ pdh_4=`uqmi -s -d "$device" --set-client-id wds,"$cid_4" \
--start-network "$apn" \
${auth:+--auth-type $auth} \
${username:+--username $username} \
${password:+--password $password} \
- --autoconnect > /dev/null
-
- echo "Starting DHCP"
- proto_init_update "$ifname" 1
- proto_send_update "$interface"
-
- json_init
- json_add_string name "${interface}_4"
- json_add_string ifname "@$interface"
- json_add_string proto "dhcp"
- json_close_object
- ubus call network add_dynamic "$(json_dump)"
-
- json_init
- json_add_string name "${interface}_6"
- json_add_string ifname "@$interface"
- json_add_string proto "dhcpv6"
- json_add_string extendprefix 1
- json_close_object
- ubus call network add_dynamic "$(json_dump)"
-}
-
-proto_qmi_setup() {
- local ret
+ --ip-family ipv4`
+ [ $? -ne 0 ] && {
+ echo "Unable to connect IPv4"
+ uqmi -s -d "$device" --set-client-id wds,"$cid_4" --release-client-id wds
+ ipv4=""
+ }
- _proto_qmi_setup $@
- ret=$?
+ [ -n "$ipv6" ] && {
+ cid_6=`uqmi -s -d "$device" --get-client-id wds`
+ if [ $? = 0 ]; then
+ pdh_6=`uqmi -s -d "$device" --set-client-id wds,"$cid_6" \
+ --start-network "$apn" \
+ ${auth:+--auth-type $auth} \
+ ${username:+--username $username} \
+ ${password:+--password $password} \
+ --ip-family ipv6`
+ [ $? -ne 0 ] && {
+ echo "Unable to connect IPv6"
+ uqmi -s -d "$device" --set-client-id wds,"$cid_6" --release-client-id wds
+ ipv6=""
+ }
+ else
+ echo "Unable to connect IPv6"
+ ipv6=""
+ fi
+ }
- [ "$ret" = 0 ] || {
- logger "qmi bringup failed, retry in 15s"
- sleep 15
+ [ -z "$ipv4" -a -z "$ipv6" ] && {
+ echo "Unable to connect"
+ proto_notify_error "$interface" CALL_FAILED
+ return 1
}
- return $rt
+ if [ -z "$dhcp" ]; then
+ echo "Setting up $ifname"
+ [ -n "$ipv4" ] && {
+ json_load "$(uqmi -s -d $device --set-client-id wds,$cid_4 --get-current-settings)"
+ json_select ipv4
+ json_get_vars ip subnet gateway dns1 dns2
+
+ proto_init_update "$ifname" 1
+ proto_set_keep 1
+ proto_add_ipv4_address "$ip" "$subnet"
+ proto_add_dns_server "$dns1"
+ proto_add_dns_server "$dns2"
+ proto_add_ipv4_route "0.0.0.0" 0 "$gateway"
+ proto_add_data
+ json_add_string "cid_4" "$cid_4"
+ json_add_string "pdh_4" "$pdh_4"
+ proto_close_data
+ proto_send_update "$interface"
+ }
+
+ [ -n "$ipv6" ] && {
+ json_load "$(uqmi -s -d $device --set-client-id wds,$cid_6 --get-current-settings)"
+ json_select ipv6
+ json_get_var ip_6 ip
+ json_get_var gateway_6 gateway
+ json_get_var dns1_6 dns1
+ json_get_var dns2_6 dns2
+ json_get_var ip_prefix_length ip-prefix-length
+
+ proto_init_update "$ifname" 1
+ proto_set_keep 1
+ # RFC 7278: Extend an IPv6 /64 Prefix to LAN
+ proto_add_ipv6_address "$ip_6" "128"
+ proto_add_ipv6_prefix "${ip_6}/${ip_prefix_length}"
+ proto_add_ipv6_route "$gateway_6" "128"
+ proto_add_ipv6_route "::0" 0 "$gateway_6" "" "" "${ip_6}/${ip_prefix_length}"
+ proto_add_dns_server "$dns1_6"
+ proto_add_dns_server "$dns2_6"
+ proto_add_data
+ json_add_string "cid_6" "$cid_6"
+ json_add_string "pdh_6" "$pdh_6"
+ proto_close_data
+ proto_send_update "$interface"
+ }
+ else
+ echo "Starting DHCP on $ifname"
+ proto_init_update "$ifname" 1
+ proto_add_data
+ [ -n "$ipv4" ] && {
+ json_add_string "cid_4" "$cid_4"
+ json_add_string "pdh_4" "$pdh_4"
+ }
+ [ -n "$ipv6" ] && {
+ json_add_string "cid_6" "$cid_6"
+ json_add_string "pdh_6" "$pdh_6"
+ }
+ proto_close_data
+ proto_send_update "$interface"
+
+ [ -n "$ipv4" ] && {
+ json_init
+ json_add_string name "${interface}_4"
+ json_add_string ifname "@$interface"
+ json_add_string proto "dhcp"
+ json_close_object
+ ubus call network add_dynamic "$(json_dump)"
+ }
+
+ [ -n "$ipv6" ] && {
+ json_init
+ json_add_string name "${interface}_6"
+ json_add_string ifname "@$interface"
+ json_add_string proto "dhcpv6"
+ # RFC 7278: Extend an IPv6 /64 Prefix to LAN
+ json_add_string extendprefix 1
+ json_close_object
+ ubus call network add_dynamic "$(json_dump)"
+ }
+ fi
}
proto_qmi_teardown() {
local interface="$1"
- local device
+ local device cid_4 pdh_4 cid_6 pdh_6
json_get_vars device
[ -n "$ctl_device" ] && device=$ctl_device
- local cid=$(uci_get_state network $interface cid)
-
echo "Stopping network"
- qmi_disconnect
- qmi_wds_release
+
+ json_load "$(ubus call network.interface.$interface status)"
+ json_select data
+ json_get_vars cid_4 pdh_4 cid_6 pdh_6
+
+ [ -n "$cid_4" ] && {
+ [ -n "$pdh_4" ] && {
+ uqmi -s -d "$device" --set-client-id wds,"$cid_4" --stop-network "$pdh_4"
+ uqmi -s -d "$device" --set-client-id wds,"$cid_4" --release-client-id wds
+ }
+ }
+ [ -n "$cid_6" ] && {
+ [ -n "$pdh_6" ] && {
+ uqmi -s -d "$device" --set-client-id wds,"$cid_6" --stop-network "$pdh_6"
+ uqmi -s -d "$device" --set-client-id wds,"$cid_6" --release-client-id wds
+ }
+ }
proto_init_update "*" 0
proto_send_update "$interface"