diff options
Diffstat (limited to 'package/network')
| -rw-r--r-- | package/network/utils/uqmi/Makefile | 6 | ||||
| -rwxr-xr-x | package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh | 169 |
2 files changed, 93 insertions, 82 deletions
diff --git a/package/network/utils/uqmi/Makefile b/package/network/utils/uqmi/Makefile index 06d9ac2..2b832d4 100644 --- a/package/network/utils/uqmi/Makefile +++ b/package/network/utils/uqmi/Makefile @@ -1,15 +1,15 @@ include $(TOPDIR)/rules.mk PKG_NAME:=uqmi -PKG_VERSION:=2016-08-23 +PKG_VERSION:=2016-11-22 PKG_RELEASE=$(PKG_SOURCE_VERSION) PKG_SOURCE_PROTO:=git PKG_SOURCE_URL=$(LEDE_GIT)/project/uqmi.git PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION) -PKG_SOURCE_VERSION:=eb1dec7d0dc283a7f61aa574a443a0ab61f8793f +PKG_SOURCE_VERSION:=d682e966615fc652da6e4e26b57aa3adfebeb2fe PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.xz -PKG_MIRROR_MD5SUM:=e6273e6aee6fce419e13f84439c240d48c32020fce7f07b2dc123ae32742382c +PKG_MIRROR_MD5SUM:=a82c4682d07870d1bdf63e475afe1c1fffabf0954a49e0e67058dae0d4f6f71c PKG_MAINTAINER:=Matti Laakso <malaakso@elisanet.fi> PKG_LICENSE:=GPL-2.0 diff --git a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh index 1235698..05b9242 100755 --- a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh +++ b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh @@ -15,24 +15,22 @@ proto_qmi_init_config() { proto_config_add_string username proto_config_add_string password proto_config_add_string pincode - proto_config_add_string delay + proto_config_add_int delay proto_config_add_string modes - proto_config_add_boolean ipv6 - proto_config_add_boolean dhcp + proto_config_add_string pdptype + proto_config_add_int profile + proto_config_add_boolean dhcpv6 + proto_config_add_boolean autoconnect proto_config_add_defaults } proto_qmi_setup() { local interface="$1" - local device apn auth username password pincode delay modes ipv6 dhcp $PROTO_DEFAULT_OPTIONS - local cid_4 pdh_4 cid_6 pdh_6 ipv4 - local ip subnet gateway dns1 dns2 ip_6 ip_prefix_length gateway_6 dns1_6 dns2_6 - json_get_vars device apn auth username password pincode delay modes ipv6 dhcp $PROTO_DEFAULT_OPTIONS - - ipv4=1 - - [ "$ipv6" = 1 ] || ipv6="" + local device apn auth username password pincode delay modes pdptype profile dhcpv6 autoconnect $PROTO_DEFAULT_OPTIONS + local cid_4 pdh_4 cid_6 pdh_6 + local ip_6 ip_prefix_length gateway_6 dns1_6 dns2_6 + json_get_vars device apn auth username password pincode delay modes pdptype profile dhcpv6 autoconnect $PROTO_DEFAULT_OPTIONS [ "$metric" = "" ] && metric="0" @@ -76,18 +74,6 @@ proto_qmi_setup() { } } - [ -n "$apn" ] || { - echo "No APN specified" - proto_notify_error "$interface" NO_APN - return 1 - } - - # try to clear previous autoconnect state - # do not reuse previous wds client id to prevent hangs caused by stale data - uqmi -s -d "$device" \ - --stop-network 0xffffffff \ - --autoconnect > /dev/null - uqmi -s -d "$device" --set-data-format 802.3 uqmi -s -d "$device" --wda-set-data-format 802.3 @@ -98,68 +84,96 @@ proto_qmi_setup() { [ -n "$modes" ] && uqmi -s -d "$device" --set-network-modes "$modes" - echo "Starting network $apn" + echo "Starting network $interface" - cid_4=`uqmi -s -d "$device" --get-client-id wds` - [ $? -ne 0 ] && { - echo "Unable to obtain client ID" - proto_notify_error "$interface" NO_CID - return 1 - } + pdptype=`echo "$pdptype" | awk '{print tolower($0)}'` + [ "$pdptype" = "ip" -o "$pdptype" = "ipv6" -o "$pdptype" = "ipv4v6" ] || pdptype="ip" + + if [ "$pdptype" = "ip" ]; then + [ -z "$autoconnect" ] && autoconnect=1 + [ "$autoconnect" = 0 ] && autoconnect="" + else + [ "$autoconnect" = 1 ] || autoconnect="" + fi + + [ "$pdptype" = "ip" -o "$pdptype" = "ipv4v6" ] && { + cid_4=`uqmi -s -d "$device" --get-client-id wds` + [ $? -ne 0 ] && { + echo "Unable to obtain client ID" + proto_notify_error "$interface" NO_CID + return 1 + } - pdh_4=`uqmi -s -d "$device" --set-client-id wds,"$cid_4" \ - --start-network "$apn" \ - ${auth:+--auth-type $auth} \ - ${username:+--username $username} \ - ${password:+--password $password} \ - --ip-family ipv4 \ - --autoconnect` - [ $? -ne 0 ] && { - echo "Unable to connect IPv4" - uqmi -s -d "$device" --set-client-id wds,"$cid_4" --release-client-id wds - ipv4="" + uqmi -s -d "$device" --set-client-id wds,"$cid_4" --set-ip-family ipv4 > /dev/null + + # try to clear previous autoconnect state + uqmi -s -d "$device" --set-client-id wds,"$cid_4" \ + --stop-network 0xffffffff \ + --autoconnect > /dev/null + + pdh_4=`uqmi -s -d "$device" --set-client-id wds,"$cid_4" \ + --start-network \ + ${apn:+--apn $apn} \ + ${profile:+--profile $profile} \ + ${auth:+--auth-type $auth} \ + ${username:+--username $username} \ + ${password:+--password $password} \ + ${autoconnect:+--autoconnect}` + [ $? -ne 0 ] && { + echo "Unable to connect IPv4" + uqmi -s -d "$device" --set-client-id wds,"$cid_4" --release-client-id wds + proto_notify_error "$interface" CALL_FAILED + return 1 + } } - [ -n "$ipv6" ] && { + [ "$pdptype" = "ipv6" -o "$pdptype" = "ipv4v6" ] && { cid_6=`uqmi -s -d "$device" --get-client-id wds` - if [ $? = 0 ]; then - pdh_6=`uqmi -s -d "$device" --set-client-id wds,"$cid_6" \ - --start-network "$apn" \ - ${auth:+--auth-type $auth} \ - ${username:+--username $username} \ - ${password:+--password $password} \ - --ip-family ipv6 --autoconnect` - [ $? -ne 0 ] && { - echo "Unable to connect IPv6" - uqmi -s -d "$device" --set-client-id wds,"$cid_6" --release-client-id wds - ipv6="" - } - else - echo "Unable to connect IPv6" - ipv6="" - fi - } + [ $? -ne 0 ] && { + echo "Unable to obtain client ID" + proto_notify_error "$interface" NO_CID + return 1 + } - [ -z "$ipv4" -a -z "$ipv6" ] && { - echo "Unable to connect" - proto_notify_error "$interface" CALL_FAILED - return 1 + uqmi -s -d "$device" --set-client-id wds,"$cid_6" --set-ip-family ipv6 > /dev/null + + # try to clear previous autoconnect state + uqmi -s -d "$device" --set-client-id wds,"$cid_6" \ + --stop-network 0xffffffff \ + --autoconnect > /dev/null + + pdh_6=`uqmi -s -d "$device" --set-client-id wds,"$cid_6" \ + --start-network \ + ${apn:+--apn $apn} \ + ${profile:+--profile $profile} \ + ${auth:+--auth-type $auth} \ + ${username:+--username $username} \ + ${password:+--password $password} \ + ${autoconnect:+--autoconnect}` + [ $? -ne 0 ] && { + echo "Unable to connect IPv6" + uqmi -s -d "$device" --set-client-id wds,"$cid_6" --release-client-id wds + proto_notify_error "$interface" CALL_FAILED + return 1 + } } echo "Setting up $ifname" proto_init_update "$ifname" 1 + proto_set_keep 1 proto_add_data - [ -n "$ipv4" ] && { + [ -n "$pdh_4" ] && { json_add_string "cid_4" "$cid_4" json_add_string "pdh_4" "$pdh_4" } - [ -n "$ipv6" ] && { + [ -n "$pdh_6" ] && { json_add_string "cid_6" "$cid_6" json_add_string "pdh_6" "$pdh_6" } - - [ -n "$ipv6" ] && { - if [ -z "$dhcp" -o "$dhcp" = 0 ]; then + proto_close_data + proto_send_update "$interface" + [ -n "$pdh_6" ] && { + if [ -z "$dhcpv6" -o "$dhcpv6" = 0 ]; then json_load "$(uqmi -s -d $device --set-client-id wds,$cid_6 --get-current-settings)" json_select ipv6 json_get_var ip_6 ip @@ -168,7 +182,8 @@ proto_qmi_setup() { json_get_var dns2_6 dns2 json_get_var ip_prefix_length ip-prefix-length - # RFC 7278: Extend an IPv6 /64 Prefix to LAN + proto_init_update "$ifname" 1 + proto_set_keep 1 proto_add_ipv6_address "$ip_6" "128" proto_add_ipv6_prefix "${ip_6}/${ip_prefix_length}" proto_add_ipv6_route "$gateway_6" "128" @@ -177,9 +192,7 @@ proto_qmi_setup() { proto_add_dns_server "$dns1_6" proto_add_dns_server "$dns2_6" } - proto_add_data - json_add_string "cid_6" "$cid_6" - json_add_string "pdh_6" "$pdh_6" + proto_send_update "$interface" else json_init json_add_string name "${interface}_6" @@ -193,10 +206,7 @@ proto_qmi_setup() { fi } - proto_close_data - proto_send_update "$interface" - - [ -n "$ipv4" ] && { + [ -n "$pdh_4" ] && { json_init json_add_string name "${interface}_4" json_add_string ifname "@$interface" @@ -213,8 +223,9 @@ qmi_wds_stop() { [ -n "$cid" ] || return - # disable previous autoconnect state using the global handle - uqmi -s -d "$device" --set-client-id wds,"$cid" --stop-network "0xffffffff" + uqmi -s -d "$device" --set-client-id wds,"$cid" \ + --stop-network 0xffffffff \ + --autoconnect > /dev/null [ -n "$pdh" ] && uqmi -s -d "$device" --set-client-id wds,"$cid" --stop-network "$pdh" uqmi -s -d "$device" --set-client-id wds,"$cid" --release-client-id wds @@ -228,7 +239,7 @@ proto_qmi_teardown() { [ -n "$ctl_device" ] && device=$ctl_device - echo "Stopping network" + echo "Stopping network $interface" json_load "$(ubus call network.interface.$interface status)" json_select data |