diff options
Diffstat (limited to 'package/nvram/src/include/wlioctl.h')
| -rw-r--r-- | package/nvram/src/include/wlioctl.h | 1097 |
1 files changed, 0 insertions, 1097 deletions
diff --git a/package/nvram/src/include/wlioctl.h b/package/nvram/src/include/wlioctl.h deleted file mode 100644 index 66783cc..0000000 --- a/package/nvram/src/include/wlioctl.h +++ /dev/null @@ -1,1097 +0,0 @@ -/* - * Custom OID/ioctl definitions for - * Broadcom 802.11abg Networking Device Driver - * - * Definitions subject to change without notice. - * - * Copyright 2004, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * - * $Id$ - */ - -#ifndef _wlioctl_h_ -#define _wlioctl_h_ - -#include <typedefs.h> -#include <proto/ethernet.h> -#include <proto/802.11.h> - -#if defined(__GNUC__) -#define PACKED __attribute__((packed)) -#else -#define PACKED -#endif - -#define WLC_ESSID_MAX_SIZE 32 - -#define WL_NUMRATES 255 /* max # of rates in a rateset */ - -typedef struct wl_rateset { - uint32 count; /* # rates in this set */ - uint8 rates[WL_NUMRATES]; /* rates in 500kbps units w/hi bit set if basic */ -} wl_rateset_t; - -#define WL_CHANSPEC_CHAN_MASK 0x0fff -#define WL_CHANSPEC_BAND_MASK 0xf000 -#define WL_CHANSPEC_BAND_SHIFT 12 -#define WL_CHANSPEC_BAND_A 0x1000 -#define WL_CHANSPEC_BAND_B 0x2000 - -/* - * Per-bss information structure. - */ - -#define WL_LEGACY_BSS_INFO_VERSION 106 /* an older supported version of wl_bss_info struct */ -#define WL_BSS_INFO_VERSION 107 /* current version of wl_bss_info struct */ - -typedef struct wl_bss_info106 { - uint version; /* version field */ - struct ether_addr BSSID; - uint8 SSID_len; - uint8 SSID[32]; - uint8 Privacy; /* 0=No WEP, 1=Use WEP */ - int16 RSSI; /* receive signal strength (in dBm) */ - uint16 beacon_period; /* units are Kusec */ - uint16 atim_window; /* units are Kusec */ - uint8 channel; /* Channel no. */ - int8 infra; /* 0=IBSS, 1=infrastructure, 2=unknown */ - struct { - uint count; /* # rates in this set */ - uint8 rates[12]; /* rates in 500kbps units w/hi bit set if basic */ - } rateset; /* supported rates */ - uint8 dtim_period; /* DTIM period */ - int8 phy_noise; /* noise right after tx (in dBm) */ - uint16 capability; /* Capability information */ - struct dot11_bcn_prb *prb; /* probe response frame (ioctl na) */ - uint16 prb_len; /* probe response frame length (ioctl na) */ - struct { - uint8 supported; /* wpa supported */ - uint8 multicast; /* multicast cipher */ - uint8 ucount; /* count of unicast ciphers */ - uint8 unicast[4]; /* unicast ciphers */ - uint8 acount; /* count of auth modes */ - uint8 auth[4]; /* Authentication modes */ - } wpa; -} wl_bss_info106_t; - -typedef struct wl_bss_info { - uint32 version; /* version field */ - uint32 length; /* byte length of data in this record, starting at version and including IEs */ - struct ether_addr BSSID; - uint16 beacon_period; /* units are Kusec */ - uint16 capability; /* Capability information */ - uint8 SSID_len; - uint8 SSID[32]; - struct { - uint count; /* # rates in this set */ - uint8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */ - } rateset; /* supported rates */ - uint8 channel; /* Channel no. */ - uint16 atim_window; /* units are Kusec */ - uint8 dtim_period; /* DTIM period */ - int16 RSSI; /* receive signal strength (in dBm) */ - int8 phy_noise; /* noise (in dBm) */ - uint32 ie_length; /* byte length of Information Elements */ - /* variable length Information Elements */ -} wl_bss_info_t; - -typedef struct wlc_ssid { - uint32 SSID_len; - uchar SSID[32]; -} wlc_ssid_t; - -typedef struct wl_scan_params { - wlc_ssid_t ssid; /* default is {0, ""} */ - struct ether_addr bssid;/* default is bcast */ - int8 bss_type; /* default is any, DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT */ - int8 scan_type; /* -1 use default, DOT11_SCANTYPE_ACTIVE/PASSIVE */ - int32 nprobes; /* -1 use default, number of probes per channel */ - int32 active_time; /* -1 use default, dwell time per channel for active scanning */ - int32 passive_time; /* -1 use default, dwell time per channel for passive scanning */ - int32 home_time; /* -1 use default, dwell time for the home channel between channel scans */ - int32 channel_num; /* 0 use default (all available channels), count of channels in channel_list */ - uint16 channel_list[1]; /* list of chanspecs */ -} wl_scan_params_t; -/* size of wl_scan_params not including variable length array */ -#define WL_SCAN_PARAMS_FIXED_SIZE 64 - -typedef struct wl_scan_results { - uint32 buflen; - uint32 version; - uint32 count; - wl_bss_info_t bss_info[1]; -} wl_scan_results_t; -/* size of wl_scan_results not including variable length array */ -#define WL_SCAN_RESULTS_FIXED_SIZE 12 - -/* uint32 list */ -typedef struct wl_uint32_list { - /* in - # of elements, out - # of entries */ - uint32 count; - /* variable length uint32 list */ - uint32 element[1]; -} wl_uint32_list_t; - -#define WLC_CNTRY_BUF_SZ 4 /* Country string is 3 bytes + NULL */ - -typedef struct wl_channels_in_country { - uint32 buflen; - uint32 band; - char country_abbrev[WLC_CNTRY_BUF_SZ]; - uint32 count; - uint32 channel[1]; -} wl_channels_in_country_t; - -typedef struct wl_country_list { - uint32 buflen; - uint32 band_set; - uint32 band; - uint32 count; - char country_abbrev[1]; -} wl_country_list_t; - -#define WL_RM_TYPE_BASIC 1 -#define WL_RM_TYPE_CCA 2 -#define WL_RM_TYPE_RPI 3 - -#define WL_RM_FLAG_PARALLEL (1<<0) - -#define WL_RM_FLAG_LATE (1<<1) -#define WL_RM_FLAG_INCAPABLE (1<<2) -#define WL_RM_FLAG_REFUSED (1<<3) - -typedef struct wl_rm_req_elt { - int8 type; - int8 flags; - uint16 chanspec; - uint32 token; /* token for this measurement */ - uint32 tsf_h; /* TSF high 32-bits of Measurement start time */ - uint32 tsf_l; /* TSF low 32-bits */ - uint32 dur; /* TUs */ -} wl_rm_req_elt_t; - -typedef struct wl_rm_req { - uint32 token; /* overall measurement set token */ - uint32 count; /* number of measurement reqests */ - wl_rm_req_elt_t req[1]; /* variable length block of requests */ -} wl_rm_req_t; -#define WL_RM_REQ_FIXED_LEN 8 - -typedef struct wl_rm_rep_elt { - int8 type; - int8 flags; - uint16 chanspec; - uint32 token; /* token for this measurement */ - uint32 tsf_h; /* TSF high 32-bits of Measurement start time */ - uint32 tsf_l; /* TSF low 32-bits */ - uint32 dur; /* TUs */ - uint32 len; /* byte length of data block */ - uint8 data[1]; /* variable length data block */ -} wl_rm_rep_elt_t; -#define WL_RM_REP_ELT_FIXED_LEN 24 /* length excluding data block */ - -#define WL_RPI_REP_BIN_NUM 8 -typedef struct wl_rm_rpi_rep { - uint8 rpi[WL_RPI_REP_BIN_NUM]; - int8 rpi_max[WL_RPI_REP_BIN_NUM]; -} wl_rm_rpi_rep_t; - -typedef struct wl_rm_rep { - uint32 token; /* overall measurement set token */ - uint32 len; /* length of measurement report block */ - wl_rm_rep_elt_t rep[1]; /* variable length block of reports */ -} wl_rm_rep_t; -#define WL_RM_REP_FIXED_LEN 8 - - -#define WLC_MAX_KEY_SIZE 32 /* max size of any key */ -#define WLC_MAX_IV_SIZE 16 /* max size of any IV */ -#define WLC_EXT_IV_FLAG (1<<5) /* flag to indicate IV is > 4 bytes */ -#define WLC_MAX_DEFAULT_KEYS 4 /* # of default WEP keys */ -#define WLC_MAX_KEYS 54 /* Max # of WEP keys */ -#define WLC_WEP1_KEY_SIZE 5 /* max size of any WEP key */ -#define WLC_WEP1_KEY_HEX_SIZE 10 /* size of WEP key in hex. */ -#define WLC_WEP128_KEY_SIZE 13 /* max size of any WEP key */ -#define WLC_WEP128_KEY_HEX_SIZE 26 /* size of WEP key in hex. */ -#define WLC_TKIP_MIC_SIZE 8 /* size of TKIP MIC */ -#define WLC_TKIP_EOM_SIZE 7 /* max size of TKIP EOM */ -#define WLC_TKIP_EOM_FLAG 0x5a /* TKIP EOM flag byte */ -#define WLC_TKIP_KEY_SIZE 32 /* size of any TKIP key */ -#define WLC_TKIP_MIC_AUTH_TX 16 /* offset to Authenticator MIC TX key */ -#define WLC_TKIP_MIC_AUTH_RX 24 /* offset to Authenticator MIC RX key */ -#define WLC_TKIP_MIC_SUP_RX 16 /* offset to Supplicant MIC RX key */ -#define WLC_TKIP_MIC_SUP_TX 24 /* offset to Supplicant MIC TX key */ -#define WLC_TKIP_P1_KEY_SIZE 10 /* size of TKHash Phase1 output, in bytes */ -#define WLC_TKIP_P2_KEY_SIZE 16 /* size of TKHash Phase2 output */ -#define WLC_AES_KEY_SIZE 16 /* size of AES key */ - - -typedef enum sup_auth_status { - WLC_SUP_DISCONNECTED = 0, - WLC_SUP_CONNECTING, - WLC_SUP_IDREQUIRED, - WLC_SUP_AUTHENTICATING, - WLC_SUP_AUTHENTICATED, - WLC_SUP_KEYXCHANGE, - WLC_SUP_KEYED -} sup_auth_status_t; - -/* Enumerate crypto algorithms */ -#define CRYPTO_ALGO_OFF 0 -#define CRYPTO_ALGO_WEP1 1 -#define CRYPTO_ALGO_TKIP 2 -#define CRYPTO_ALGO_WEP128 3 -#define CRYPTO_ALGO_AES_CCM 4 -#define CRYPTO_ALGO_AES_OCB_MSDU 5 -#define CRYPTO_ALGO_AES_OCB_MPDU 6 -#define CRYPTO_ALGO_NALG 7 - -#define WSEC_GEN_MIC_ERROR 0x0001 -#define WSEC_GEN_REPLAY 0x0002 - -#define WL_SOFT_KEY (1 << 0) /* Indicates this key is using soft encrypt */ -#define WL_PRIMARY_KEY (1 << 1) /* Indicates this key is the primary (ie tx) key */ -#define WL_KF_RES_4 (1 << 4) /* Reserved for backward compat */ -#define WL_KF_RES_5 (1 << 5) /* Reserved for backward compat */ - - -typedef struct wlc_tkip_info { - uint16 phase1[WLC_TKIP_P1_KEY_SIZE/sizeof(uint16)]; /* tkhash phase1 result */ - uint8 phase2[WLC_TKIP_P2_KEY_SIZE]; /* tkhash phase2 result */ - uint32 micl; - uint32 micr; -} tkip_info_t; - -typedef struct _wsec_iv { - uint32 hi; /* upper 32 bits of IV */ - uint16 lo; /* lower 16 bits of IV */ -} wsec_iv_t; - -typedef struct wsec_key { - uint32 index; /* key index */ - uint32 len; /* key length */ - uint8 data[WLC_MAX_KEY_SIZE]; /* key data */ - tkip_info_t tkip_tx; /* tkip transmit state */ - tkip_info_t tkip_rx; /* tkip receive state */ - uint32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */ - uint32 flags; /* misc flags */ - uint32 algo_hw; /* cache for hw register*/ - uint32 aes_mode; /* cache for hw register*/ - int iv_len; /* IV length */ - int iv_initialized; /* has IV been initialized already? */ - int icv_len; /* ICV length */ - wsec_iv_t rxiv; /* Rx IV */ - wsec_iv_t txiv; /* Tx IV */ - struct ether_addr ea; /* per station */ -} wsec_key_t; - - - -typedef struct wl_wsec_key { - uint32 index; /* key index */ - uint32 len; /* key length */ - uint8 data[DOT11_MAX_KEY_SIZE]; /* key data */ - uint32 pad_1[18]; - uint32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */ - uint32 flags; /* misc flags */ - uint32 pad_2[2]; - int pad_3; - int iv_initialized; /* has IV been initialized already? */ - int pad_4; - /* Rx IV */ - struct { - uint32 hi; /* upper 32 bits of IV */ - uint16 lo; /* lower 16 bits of IV */ - } rxiv; - uint32 pad_5[2]; - struct ether_addr ea; /* per station */ -} wl_wsec_key_t; - -/* For use with wlc_wep_key.flags */ -#define WSEC_PRIMARY_KEY (1 << 1) /* Indicates this key is the primary (ie tx) key */ -#define WSEC_TKIP_ERROR (1 << 2) /* Provoke deliberate error */ - -#define WSEC_MIN_PSK_LEN 8 -#define WSEC_MAX_PSK_LEN 64 - -/* Flag for key material needing passhash'ing */ -#define WSEC_PASSPHRASE (1<<0) - -/* recepticle for WLC_SET_WSEC_PMK parameter */ -typedef struct { - ushort key_len; /* octets in key material */ - ushort flags; /* key handling qualification */ - uint8 key[WSEC_MAX_PSK_LEN]; /* PMK material */ -} wsec_pmk_t; - -/* wireless security bitvec */ -#define WEP_ENABLED 1 -#define TKIP_ENABLED 2 -#define AES_ENABLED 4 -#define WSEC_SWFLAG 8 - -#define WSEC_SW(wsec) ((wsec) & WSEC_SWFLAG) -#define WSEC_HW(wsec) (!WSEC_SW(wsec)) -#define WSEC_WEP_ENABLED(wsec) ((wsec) & WEP_ENABLED) -#define WSEC_TKIP_ENABLED(wsec) ((wsec) & TKIP_ENABLED) -#define WSEC_AES_ENABLED(wsec) ((wsec) & AES_ENABLED) -#define WSEC_ENABLED(wsec) ((wsec) & (WEP_ENABLED | TKIP_ENABLED | AES_ENABLED)) - - -/* wireless authentication bit vector */ -#define WPA_ENABLED 1 -#define PSK_ENABLED 2 - -#define WAUTH_WPA_ENABLED(wauth) ((wauth) & WPA_ENABLED) -#define WAUTH_PSK_ENABLED(wauth) ((wauth) & PSK_ENABLED) -#define WAUTH_ENABLED(wauth) ((wauth) & (WPA_ENABLED | PSK_ENABLED)) - -/* group/mcast cipher */ -#define WPA_MCAST_CIPHER(wsec) (((wsec) & TKIP_ENABLED) ? WPA_CIPHER_TKIP : \ - ((wsec) & AES_ENABLED) ? WPA_CIPHER_AES_CCM : \ - WPA_CIPHER_NONE) - - -typedef struct wl_led_info { - uint32 index; /* led index */ - uint32 behavior; - bool activehi; -} wl_led_info_t; - -/* - * definitions for driver messages passed from WL to NAS. - */ -/* Use this to recognize wpa and 802.1x driver messages. */ -static const uint8 wl_wpa_snap_template[] = - { 0xaa, 0xaa, 0x03, 0x00, 0x90, 0x4c }; - -#define WL_WPA_MSG_IFNAME_MAX 16 - -/* WPA driver message */ -typedef struct wl_wpa_header { - struct ether_header eth; - struct dot11_llc_snap_header snap; - uint8 version; - uint8 type; - /* version 2 additions */ - char ifname[WL_WPA_MSG_IFNAME_MAX]; - /* version specific data */ - /* uint8 data[1]; */ -} wl_wpa_header_t PACKED; - -/* - * definitions for 802.2 messages passed from WL to NAS. - */ -/* This seems not to be defined outside the kernel on linux. */ -#ifndef ETH_P_802_2 -#define ETH_P_802_2 4 -#endif - -#define WL_WPA_HEADER_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN + 2 + WL_WPA_MSG_IFNAME_MAX) - -/* WPA driver message ethertype - private between wlc and nas */ -#define WL_WPA_ETHER_TYPE 0x9999 - -/* WPA driver message current version */ -#define WL_WPA_MSG_VERSION 2 - -/* Type field values for the 802.2 driver messages for WPA. */ -#define WLC_ASSOC_MSG 1 -#define WLC_DISASSOC_MSG 2 -#define WLC_PTK_MIC_MSG 3 -#define WLC_GTK_MIC_MSG 4 - -/* Use this to recognize 802.2 driver messages. */ -static const uint8 wpa_snap_template[] = - { 0xaa, 0xaa, 0x03, 0x00, 0x90, 0x4c }; - - -/* 802.1x driver message */ -typedef struct wl_eapol_header { - struct ether_header eth; - struct dot11_llc_snap_header snap; - uint8 version; - uint8 reserved; - char ifname[WL_WPA_MSG_IFNAME_MAX]; - /* version specific data */ - /* uint8 802_1x_msg[1]; */ -} wl_eapol_header_t PACKED; - -#define WL_EAPOL_HEADER_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN + 2 + WL_WPA_MSG_IFNAME_MAX) - -/* 802.1x driver message ethertype - private between wlc and nas */ -#define WL_EAPOL_ETHER_TYPE 0x999A - -/* 802.1x driver message current version */ -#define WL_EAPOL_MSG_VERSION 1 - -/* srom read/write struct passed through ioctl */ -typedef struct { - uint byteoff; /* byte offset */ - uint nbytes; /* number of bytes */ - uint16 buf[1]; -} srom_rw_t; - -/* R_REG and W_REG struct passed through ioctl */ -typedef struct { - uint32 byteoff; /* byte offset of the field in d11regs_t */ - uint32 val; /* read/write value of the field */ - uint32 size; /* sizeof the field */ -} rw_reg_t; - -/* Structure used by GET/SET_ATTEN ioctls */ -typedef struct { - uint16 auto_ctrl; /* 1: Automatic control, 0: overriden */ - uint16 bb; /* Baseband attenuation */ - uint16 radio; /* Radio attenuation */ - uint16 txctl1; /* Radio TX_CTL1 value */ -} atten_t; - -/* Used to get specific STA parameters */ -typedef struct { - uint32 val; - struct ether_addr ea; -} scb_val_t; - -/* callback registration data types */ - -typedef struct _mac_event_params { - uint msg; - struct ether_addr *addr; - uint result; - uint status; - uint auth_type; -} mac_event_params_t; - -typedef struct _mic_error_params { - struct ether_addr *ea; - bool group; - bool flush_txq; -} mic_error_params_t; - -typedef enum _wl_callback { - WL_MAC_EVENT_CALLBACK = 0, - WL_LINK_UP_CALLBACK, - WL_LINK_DOWN_CALLBACK, - WL_MIC_ERROR_CALLBACK, - WL_LAST_CALLBACK -} wl_callback_t; - -typedef struct _callback { - void (*fn)(void *, void *); - void *context; -} callback_t; - -typedef struct _scan_callback { - void (*fn)(void *); - void *context; -} scan_callback_t; - -/* used to register an arbitrary callback via the IOCTL interface */ -typedef struct _set_callback { - int index; - callback_t callback; -} set_callback_t; - - - -/* Event data type */ -typedef struct { - uint msg; /* Message (see below) */ - struct ether_addr *addr; /* Station address (if applicable) */ - uint status; /* Status code (see below) */ - uint reason; /* Reason code (if applicable) */ - uint auth_type; /* WLC_E_AUTH */ - bool link; /* WLC_E_LINK */ - bool group; /* WLC_E_MIC_ERROR */ - bool flush_txq; /* WLC_E_MIC_ERROR */ -} wlc_event_t; - -typedef struct { - uint16 ver; /* version of this struct */ - uint16 cap; /* sta's advertized capabilities */ - uint32 flags; /* flags defined below */ - uint32 idle; /* time since data pkt rx'd from sta */ - struct ether_addr ea; /* Station address */ - wl_rateset_t rateset; /* rateset in use */ -} sta_info_t; - -#define WL_STA_INFO_LEN 300 -#define WL_STA_VER 1 - -/* flags fields */ -#define WL_STA_BRCM 0x01 -#define WL_STA_WME 0x02 -#define WL_STA_ABCAP 0x04 -#define WL_STA_AUTHE 0x08 -#define WL_STA_ASSOC 0x10 -#define WL_STA_AUTHO 0x20 - -/* Event messages */ -#define WLC_E_SET_SSID 1 -#define WLC_E_JOIN 2 -#define WLC_E_START 3 -#define WLC_E_AUTH 4 -#define WLC_E_AUTH_IND 5 -#define WLC_E_DEAUTH 6 -#define WLC_E_DEAUTH_IND 7 -#define WLC_E_ASSOC 8 -#define WLC_E_ASSOC_IND 9 -#define WLC_E_REASSOC 10 -#define WLC_E_REASSOC_IND 11 -#define WLC_E_DISASSOC 12 -#define WLC_E_DISASSOC_IND 13 -#define WLC_E_QUIET_START 14 /* 802.11h Quiet period started */ -#define WLC_E_QUIET_END 15 /* 802.11h Quiet period ended */ -#define WLC_E_GOT_BEACONS 16 -#define WLC_E_LINK 17 /* Link indication */ -#define WLC_E_MIC_ERROR 18 /* TKIP MIC error occurred */ -#define WLC_E_NDIS_LINK 19 /* NDIS style link indication */ -#define WLC_E_ROAM 20 -#define WLC_E_LAST 21 - -/* Event status codes */ -#define WLC_E_STATUS_SUCCESS 0 -#define WLC_E_STATUS_FAIL 1 -#define WLC_E_STATUS_TIMEOUT 2 -#define WLC_E_STATUS_NO_NETWORKS 3 -#define WLC_E_STATUS_ABORT 4 - -typedef struct wlc_event_cb { - uint msg; /* Event message or 0 for all */ - void (*fn)(void *, wlc_event_t *); /* Callback function */ - void *context; /* Passed to callback function */ - struct wlc_event_cb *next; /* Next in the chain */ -} wlc_event_cb_t; - -/* - * Country locale determines which channels are available to us. - */ -typedef enum _wlc_locale { - WLC_WW = 0, /* Worldwide */ - WLC_THA, /* Thailand */ - WLC_ISR, /* Israel */ - WLC_JDN, /* Jordan */ - WLC_PRC, /* China */ - WLC_JPN, /* Japan */ - WLC_FCC, /* USA */ - WLC_EUR, /* Europe */ - WLC_USL, /* US Low Band only */ - WLC_JPH, /* Japan High Band only */ - WLC_ALL, /* All the channels in this band */ - WLC_11D, /* Represents locale recieved by 11d beacons */ - WLC_LAST_LOCALE, - WLC_UNDEFINED_LOCALE = 0xf -} wlc_locale_t; - -/* channel encoding */ -typedef struct channel_info { - int hw_channel; - int target_channel; - int scan_channel; -} channel_info_t; - -/* For ioctls that take a list of MAC addresses */ -struct maclist { - uint count; /* number of MAC addresses */ - struct ether_addr ea[1]; /* variable length array of MAC addresses */ -}; - -/* get pkt count struct passed through ioctl */ -typedef struct get_pktcnt { - uint rx_good_pkt; - uint rx_bad_pkt; - uint tx_good_pkt; - uint tx_bad_pkt; -} get_pktcnt_t; - -/* Linux network driver ioctl encoding */ -typedef struct wl_ioctl { - uint cmd; /* common ioctl definition */ - void *buf; /* pointer to user buffer */ - uint len; /* length of user buffer */ - bool set; /* get or set request (optional) */ - uint used; /* bytes read or written (optional) */ - uint needed; /* bytes needed (optional) */ -} wl_ioctl_t; - -/* - * Structure for passing hardware and software - * revision info up from the driver. - */ -typedef struct wlc_rev_info { - uint vendorid; /* PCI vendor id */ - uint deviceid; /* device id of chip */ - uint radiorev; /* radio revision */ - uint chiprev; /* chip revision */ - uint corerev; /* core revision */ - uint boardid; /* board identifier (usu. PCI sub-device id) */ - uint boardvendor; /* board vendor (usu. PCI sub-vendor id) */ - uint boardrev; /* board revision */ - uint driverrev; /* driver version */ - uint ucoderev; /* microcode version */ - uint bus; /* bus type */ - uint chipnum; /* chip number */ -} wlc_rev_info_t; - -/* check this magic number */ -#define WLC_IOCTL_MAGIC 0x14e46c77 - -/* bump this number if you change the ioctl interface */ -#define WLC_IOCTL_VERSION 1 - -/* maximum length buffer required */ -#define WLC_IOCTL_MAXLEN 8192 - -/* maximum length buffer required */ -#define WLC_IOCTL_SMLEN 256 - -/* common ioctl definitions */ -#define WLC_GET_MAGIC 0 -#define WLC_GET_VERSION 1 -#define WLC_UP 2 -#define WLC_DOWN 3 -#define WLC_GET_LOOP 4 -#define WLC_SET_LOOP 5 -#define WLC_DUMP 6 -#define WLC_GET_MSGLEVEL 7 -#define WLC_SET_MSGLEVEL 8 -#define WLC_GET_PROMISC 9 -#define WLC_SET_PROMISC 10 -#define WLC_OBSOLETE 11 -#define WLC_GET_RATE 12 -#define WLC_SET_RATE 13 -#define WLC_GET_INSTANCE 14 -#define WLC_GET_FRAG 15 -#define WLC_SET_FRAG 16 -#define WLC_GET_RTS 17 -#define WLC_SET_RTS 18 -#define WLC_GET_INFRA 19 -#define WLC_SET_INFRA 20 -#define WLC_GET_AUTH 21 -#define WLC_SET_AUTH 22 -#define WLC_GET_BSSID 23 -#define WLC_SET_BSSID 24 -#define WLC_GET_SSID 25 -#define WLC_SET_SSID 26 -#define WLC_RESTART 27 -#define WLC_DUMP_SCB 28 -#define WLC_GET_CHANNEL 29 -#define WLC_SET_CHANNEL 30 -#define WLC_GET_SRL 31 -#define WLC_SET_SRL 32 -#define WLC_GET_LRL 33 -#define WLC_SET_LRL 34 -#define WLC_GET_PLCPHDR 35 -#define WLC_SET_PLCPHDR 36 -#define WLC_GET_RADIO 37 -#define WLC_SET_RADIO 38 -#define WLC_GET_PHYTYPE 39 -#define WLC_DUMP_RATE 40 -#define WLC_SET_RATE_PARAMS 41 -#define WLC_GET_WEP 42 -#define WLC_SET_WEP 43 -#define WLC_GET_KEY 44 -#define WLC_SET_KEY 45 -#define WLC_GET_REGULATORY 46 -#define WLC_SET_REGULATORY 47 -#define WLC_GET_PASSIVE 48 /* added by nbd */ -#define WLC_SET_PASSIVE 49 /* added by nbd */ -#define WLC_SCAN 50 -#define WLC_SCAN_RESULTS 51 -#define WLC_DISASSOC 52 -#define WLC_REASSOC 53 -#define WLC_GET_ROAM_TRIGGER 54 -#define WLC_SET_ROAM_TRIGGER 55 -#define WLC_GET_ROAM_DELTA 56 -#define WLC_SET_ROAM_DELTA 57 -#define WLC_GET_ROAM_SCAN_PERIOD 58 -#define WLC_SET_ROAM_SCAN_PERIOD 59 -#define WLC_EVM 60 -#define WLC_GET_TXANT 61 -#define WLC_SET_TXANT 62 -#define WLC_GET_ANTDIV 63 -#define WLC_SET_ANTDIV 64 -#define WLC_GET_TXPWR 65 -#define WLC_SET_TXPWR 66 -#define WLC_GET_CLOSED 67 -#define WLC_SET_CLOSED 68 -#define WLC_GET_MACLIST 69 -#define WLC_SET_MACLIST 70 -#define WLC_GET_RATESET 71 -#define WLC_SET_RATESET 72 -#define WLC_GET_LOCALE 73 -#define WLC_SET_LOCALE 74 -#define WLC_GET_BCNPRD 75 -#define WLC_SET_BCNPRD 76 -#define WLC_GET_DTIMPRD 77 -#define WLC_SET_DTIMPRD 78 -#define WLC_GET_SROM 79 -#define WLC_SET_SROM 80 -#define WLC_GET_WEP_RESTRICT 81 -#define WLC_SET_WEP_RESTRICT 82 -#define WLC_GET_COUNTRY 83 -#define WLC_SET_COUNTRY 84 -#define WLC_GET_PM 85 -#define WLC_SET_PM 86 -#define WLC_GET_WAKE 87 -#define WLC_SET_WAKE 88 -#define WLC_GET_D11CNTS 89 -#define WLC_GET_FORCELINK 90 /* ndis only */ -#define WLC_SET_FORCELINK 91 /* ndis only */ -#define WLC_FREQ_ACCURACY 92 -#define WLC_CARRIER_SUPPRESS 93 -#define WLC_GET_PHYREG 94 -#define WLC_SET_PHYREG 95 -#define WLC_GET_RADIOREG 96 -#define WLC_SET_RADIOREG 97 -#define WLC_GET_REVINFO 98 -#define WLC_GET_UCANTDIV 99 -#define WLC_SET_UCANTDIV 100 -#define WLC_R_REG 101 -#define WLC_W_REG 102 -#define WLC_DIAG_LOOPBACK 103 -#define WLC_RESET_D11CNTS 104 -#define WLC_GET_MACMODE 105 -#define WLC_SET_MACMODE 106 -#define WLC_GET_MONITOR 107 /* added by nbd */ -#define WLC_SET_MONITOR 108 /* added by nbd */ -#define WLC_GET_GMODE 109 -#define WLC_SET_GMODE 110 -#define WLC_GET_LEGACY_ERP 111 -#define WLC_SET_LEGACY_ERP 112 -#define WLC_GET_RX_ANT 113 -#define WLC_GET_CURR_RATESET 114 /* current rateset */ -#define WLC_GET_SCANSUPPRESS 115 -#define WLC_SET_SCANSUPPRESS 116 -#define WLC_GET_AP 117 -#define WLC_SET_AP 118 -#define WLC_GET_EAP_RESTRICT 119 -#define WLC_SET_EAP_RESTRICT 120 -#define WLC_SCB_AUTHORIZE 121 -#define WLC_SCB_DEAUTHORIZE 122 -#define WLC_GET_WDSLIST 123 -#define WLC_SET_WDSLIST 124 -#define WLC_GET_ATIM 125 -#define WLC_SET_ATIM 126 -#define WLC_GET_RSSI 127 -#define WLC_GET_PHYANTDIV 128 -#define WLC_SET_PHYANTDIV 129 -#define WLC_AP_RX_ONLY 130 -#define WLC_GET_TX_PATH_PWR 131 -#define WLC_SET_TX_PATH_PWR 132 -#define WLC_GET_WSEC 133 -#define WLC_SET_WSEC 134 -#define WLC_GET_PHY_NOISE 135 -#define WLC_GET_BSS_INFO 136 -#define WLC_GET_PKTCNTS 137 -#define WLC_GET_LAZYWDS 138 -#define WLC_SET_LAZYWDS 139 -#define WLC_GET_BANDLIST 140 -#define WLC_GET_BAND 141 -#define WLC_SET_BAND 142 -#define WLC_SCB_DEAUTHENTICATE 143 -#define WLC_GET_SHORTSLOT 144 -#define WLC_GET_SHORTSLOT_OVERRIDE 145 -#define WLC_SET_SHORTSLOT_OVERRIDE 146 -#define WLC_GET_SHORTSLOT_RESTRICT 147 -#define WLC_SET_SHORTSLOT_RESTRICT 148 -#define WLC_GET_GMODE_PROTECTION 149 -#define WLC_GET_GMODE_PROTECTION_OVERRIDE 150 -#define WLC_SET_GMODE_PROTECTION_OVERRIDE 151 -#define WLC_UPGRADE 152 -#define WLC_GET_MRATE 153 -#define WLC_SET_MRATE 154 -#define WLC_GET_IGNORE_BCNS 155 -#define WLC_SET_IGNORE_BCNS 156 -#define WLC_GET_SCB_TIMEOUT 157 -#define WLC_SET_SCB_TIMEOUT 158 -#define WLC_GET_ASSOCLIST 159 -#define WLC_GET_CLK 160 -#define WLC_SET_CLK 161 -#define WLC_GET_UP 162 -#define WLC_OUT 163 -#define WLC_GET_WPA_AUTH 164 -#define WLC_SET_WPA_AUTH 165 -#define WLC_GET_UCFLAGS 166 -#define WLC_SET_UCFLAGS 167 -#define WLC_GET_PWRIDX 168 -#define WLC_SET_PWRIDX 169 -#define WLC_GET_TSSI 170 -#define WLC_GET_SUP_RATESET_OVERRIDE 171 -#define WLC_SET_SUP_RATESET_OVERRIDE 172 -#define WLC_SET_FAST_TIMER 173 -#define WLC_GET_FAST_TIMER 174 -#define WLC_SET_SLOW_TIMER 175 -#define WLC_GET_SLOW_TIMER 176 -#define WLC_DUMP_PHYREGS 177 -#define WLC_GET_GMODE_PROTECTION_CONTROL 178 -#define WLC_SET_GMODE_PROTECTION_CONTROL 179 -#define WLC_GET_PHYLIST 180 -#define WLC_ENCRYPT_STRENGTH 181 /* ndis only */ -#define WLC_DECRYPT_STATUS 182 /* ndis only */ -#define WLC_GET_KEY_SEQ 183 -#define WLC_GET_SCAN_CHANNEL_TIME 184 -#define WLC_SET_SCAN_CHANNEL_TIME 185 -#define WLC_GET_SCAN_UNASSOC_TIME 186 -#define WLC_SET_SCAN_UNASSOC_TIME 187 -#define WLC_GET_SCAN_HOME_TIME 188 -#define WLC_SET_SCAN_HOME_TIME 189 -#define WLC_GET_SCAN_PASSES 190 -#define WLC_SET_SCAN_PASSES 191 -#define WLC_GET_PRB_RESP_TIMEOUT 192 -#define WLC_SET_PRB_RESP_TIMEOUT 193 -#define WLC_GET_ATTEN 194 -#define WLC_SET_ATTEN 195 -#define WLC_GET_SHMEM 196 /* diag */ -#define WLC_SET_SHMEM 197 /* diag */ -#define WLC_GET_GMODE_PROTECTION_CTS 198 -#define WLC_SET_GMODE_PROTECTION_CTS 199 -#define WLC_SET_TKIP_MIC_FLAG 200 -#define WLC_SCB_DEAUTHENTICATE_FOR_REASON 201 -#define WLC_TKIP_COUNTERMEASURES 202 -#define WLC_GET_PIOMODE 203 -#define WLC_SET_PIOMODE 204 -#define WLC_SET_LED 209 -#define WLC_GET_LED 210 -#define WLC_GET_INTERFERENCE_MODE 211 -#define WLC_SET_INTERFERENCE_MODE 212 -#define WLC_GET_CHANNEL_QA 213 -#define WLC_START_CHANNEL_QA 214 -#define WLC_GET_CHANNEL_SEL 215 -#define WLC_START_CHANNEL_SEL 216 -#define WLC_GET_VALID_CHANNELS 217 -#define WLC_GET_FAKEFRAG 218 -#define WLC_SET_FAKEFRAG 219 -#define WLC_GET_PWROUT_PERCENTAGE 220 -#define WLC_SET_PWROUT_PERCENTAGE 221 -#define WLC_SET_BAD_FRAME_PREEMPT 222 -#define WLC_GET_BAD_FRAME_PREEMPT 223 -#define WLC_SET_LEAP_LIST 224 -#define WLC_GET_LEAP_LIST 225 -#define WLC_GET_CWMIN 226 -#define WLC_SET_CWMIN 227 -#define WLC_GET_CWMAX 228 -#define WLC_SET_CWMAX 229 -#define WLC_GET_WET 230 -#define WLC_SET_WET 231 -#define WLC_GET_KEY_PRIMARY 235 -#define WLC_SET_KEY_PRIMARY 236 -#define WLC_SCAN_WITH_CALLBACK 240 -#define WLC_WDS_GET_REMOTE_HWADDR 246 /* currently handled in wl_linux.c/wl_vx.c */ -#define WLC_SET_CS_SCAN_TIMER 248 -#define WLC_GET_CS_SCAN_TIMER 249 -#define WLC_CURRENT_PWR 256 -#define WLC_GET_CHANNELS_IN_COUNTRY 260 -#define WLC_GET_COUNTRY_LIST 261 -#define WLC_GET_VAR 262 /* get value of named variable */ -#define WLC_SET_VAR 263 /* set named variable to value */ -#define WLC_NVRAM_GET 264 -#define WLC_NVRAM_SET 265 -#define WLC_SET_WSEC_PMK 268 -#define WLC_GET_AUTH_MODE 269 -#define WLC_SET_AUTH_MODE 270 -#define WLC_LAST 273 /* do not change - use get_var/set_var */ - -/* - * Minor kludge alert: - * Duplicate a few definitions that irelay requires from epiioctl.h here - * so caller doesn't have to include this file and epiioctl.h . - * If this grows any more, it would be time to move these irelay-specific - * definitions out of the epiioctl.h and into a separate driver common file. - */ -#ifndef EPICTRL_COOKIE -#define EPICTRL_COOKIE 0xABADCEDE -#endif - -/* vx wlc ioctl's offset */ -#define CMN_IOCTL_OFF 0x180 - -/* - * custom OID support - * - * 0xFF - implementation specific OID - * 0xE4 - first byte of Broadcom PCI vendor ID - * 0x14 - second byte of Broadcom PCI vendor ID - * 0xXX - the custom OID number - */ - -/* begin 0x1f values beyond the start of the ET driver range. */ -#define WL_OID_BASE 0xFFE41420 - -/* NDIS overrides */ -#define OID_WL_GETINSTANCE (WL_OID_BASE + WLC_GET_INSTANCE) -#define OID_WL_GET_FORCELINK (WL_OID_BASE + WLC_GET_FORCELINK) -#define OID_WL_SET_FORCELINK (WL_OID_BASE + WLC_SET_FORCELINK) -#define OID_WL_ENCRYPT_STRENGTH (WL_OID_BASE + WLC_ENCRYPT_STRENGTH) -#define OID_WL_DECRYPT_STATUS (WL_OID_BASE + WLC_DECRYPT_STATUS) - -#define WL_DECRYPT_STATUS_SUCCESS 1 -#define WL_DECRYPT_STATUS_FAILURE 2 -#define WL_DECRYPT_STATUS_UNKNOWN 3 - -/* allows user-mode app to poll the status of USB image upgrade */ -#define WLC_UPGRADE_SUCCESS 0 -#define WLC_UPGRADE_PENDING 1 - -/* Bit masks for radio disabled status - returned by WL_GET_RADIO */ -#define WL_RADIO_SW_DISABLE (1<<0) -#define WL_RADIO_HW_DISABLE (1<<1) - -/* Override bit for WLC_SET_TXPWR. if set, ignore other level limits */ -#define WL_TXPWR_OVERRIDE (1<<31) - - -/* Bus types */ -#define WL_SB_BUS 0 /* Silicon Backplane */ -#define WL_PCI_BUS 1 /* PCI target */ -#define WL_PCMCIA_BUS 2 /* PCMCIA target */ - -/* band types */ -#define WLC_BAND_AUTO 0 /* auto-select */ -#define WLC_BAND_A 1 /* "a" band (5 Ghz) */ -#define WLC_BAND_B 2 /* "b" band (2.4 Ghz) */ - -/* MAC list modes */ -#define WLC_MACMODE_DISABLED 0 /* MAC list disabled */ -#define WLC_MACMODE_DENY 1 /* Deny specified (i.e. allow unspecified) */ -#define WLC_MACMODE_ALLOW 2 /* Allow specified (i.e. deny unspecified) */ - - -/* 54g modes (basic bits may still be overridden) */ -#define GMODE_LEGACY_B 0 /* Rateset: 1b, 2b, 5.5, 11 */ - /* Preamble: Long */ - /* Shortslot: Off */ -#define GMODE_AUTO 1 /* Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54 */ - /* Extended Rateset: 6, 9, 12, 48 */ - /* Preamble: Long */ - /* Shortslot: Auto */ -#define GMODE_ONLY 2 /* Rateset: 1b, 2b, 5.5b, 11b, 18, 24b, 36, 54 */ - /* Extended Rateset: 6b, 9, 12b, 48 */ - /* Preamble: Short required */ - /* Shortslot: Auto */ -#define GMODE_B_DEFERRED 3 /* Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54 */ - /* Extended Rateset: 6, 9, 12, 48 */ - /* Preamble: Long */ - /* Shortslot: On */ -#define GMODE_PERFORMANCE 4 /* Rateset: 1b, 2b, 5.5b, 6b, 9, 11b, 12b, 18, 24b, 36, 48, 54 */ - /* Preamble: Short required */ - /* Shortslot: On and required */ -#define GMODE_LRS 5 /* Rateset: 1b, 2b, 5.5b, 11b */ - /* Extended Rateset: 6, 9, 12, 18, 24, 36, 48, 54 */ - /* Preamble: Long */ - /* Shortslot: Auto */ -#define GMODE_MAX 6 - - -/* values for PLCPHdr_override */ -#define WLC_PLCP_AUTO -1 -#define WLC_PLCP_SHORT 0 -#define WLC_PLCP_LONG 1 - -/* values for g_protection_override */ -#define WLC_G_PROTECTION_AUTO -1 -#define WLC_G_PROTECTION_OFF 0 -#define WLC_G_PROTECTION_ON 1 - -/* values for g_protection_control */ -#define WLC_G_PROTECTION_CTL_OFF 0 -#define WLC_G_PROTECTION_CTL_LOCAL 1 -#define WLC_G_PROTECTION_CTL_OVERLAP 2 - -/* Values for PM */ -#define PM_OFF 0 -#define PM_MAX 1 -#define PM_FAST 2 - -/* interference mitigation options */ -#define INTERFERE_NONE 0 /* off */ -#define NON_WLAN 1 /* foreign/non 802.11 interference, no auto detect */ -#define WLAN_MANUAL 2 /* ACI: no auto detection */ -#define WLAN_AUTO 3 /* ACI: auto - detact */ - -/* Message levels */ -#define WL_ERROR_VAL 0x0001 -#define WL_TRACE_VAL 0x0002 -#define WL_PRHDRS_VAL 0x0004 -#define WL_PRPKT_VAL 0x0008 -#define WL_INFORM_VAL 0x0010 -#define WL_TMP_VAL 0x0020 -#define WL_OID_VAL 0x0040 -#define WL_RATE_VAL 0x0080 -#define WL_ASSOC_VAL 0x0100 -#define WL_PRUSR_VAL 0x0200 -#define WL_PS_VAL 0x0400 -#define WL_TXPWR_VAL 0x0800 -#define WL_GMODE_VAL 0x1000 -#define WL_DUAL_VAL 0x2000 -#define WL_WSEC_VAL 0x4000 -#define WL_WSEC_DUMP_VAL 0x8000 -#define WL_LOG_VAL 0x10000 -#define WL_NRSSI_VAL 0x20000 -#define WL_LOFT_VAL 0x40000 -#define WL_REGULATORY_VAL 0x80000 -#define WL_ACI_VAL 0x100000 - - -/* 802.11h enforcement levels */ -#define SPECT_MNGMT_OFF 0 /* 11h disabled */ -#define SPECT_MNGMT_LOOSE 1 /* Allow scan lists to contain non-11h AP */ - /* when 11h is enabled */ -#define SPECT_MNGMT_STRICT 2 /* Prine out non-11h APs from scan list */ - - - -/* max # of leds supported by GPIO (gpio pin# == led index#) */ -#define WL_LED_NUMGPIO 16 /* gpio 0-15 */ - -/* led per-pin behaviors */ -#define WL_LED_OFF 0 /* always off */ -#define WL_LED_ON 1 /* always on */ -#define WL_LED_ACTIVITY 2 /* activity */ -#define WL_LED_RADIO 3 /* radio enabled */ -#define WL_LED_ARADIO 4 /* 5 Ghz radio enabled */ -#define WL_LED_BRADIO 5 /* 2.4Ghz radio enabled */ -#define WL_LED_BGMODE 6 /* on if gmode, off if bmode */ -#define WL_LED_WI1 7 -#define WL_LED_WI2 8 -#define WL_LED_WI3 9 -#define WL_LED_ASSOC 10 /* associated state indicator */ -#define WL_LED_INACTIVE 11 /* null behavior (clears default behavior) */ -#define WL_LED_NUMBEHAVIOR 12 - -/* led behavior numeric value format */ -#define WL_LED_BEH_MASK 0x7f /* behavior mask */ -#define WL_LED_AL_MASK 0x80 /* activelow (polarity) bit */ - - -/* maximum channels */ -#define WL_NUMCHANNELS 64 /* max # of channels in the band */ - -/* rate check */ -#define WL_RATE_OFDM(r) (((r) & 0x7f) == 12 || ((r) & 0x7f) == 18 || \ - ((r) & 0x7f) == 24 || ((r) & 0x7f) == 36 || \ - ((r) & 0x7f) == 48 || ((r) & 0x7f) == 72 || \ - ((r) & 0x7f) == 96 || ((r) & 0x7f) == 108) - -/* WDS link local endpoint WPA role */ -#define WL_WDS_WPA_ROLE_AUTH 0 /* authenticator */ -#define WL_WDS_WPA_ROLE_SUP 1 /* supplicant */ -#define WL_WDS_WPA_ROLE_AUTO 255 /* auto, based on mac addr value */ - -/* afterburner_override */ -#define ABO_AUTO -1 /* auto - no override */ -#define ABO_OFF 0 /* force afterburner off */ -#define ABO_ON 1 /* force afterburner on */ - -#define GMODE_AFTERBURNER 6 - -#undef PACKED - -#endif /* _wlioctl_h_ */ |