summaryrefslogtreecommitdiff
path: root/package/nvram/src/include/wlioctl.h
diff options
context:
space:
mode:
Diffstat (limited to 'package/nvram/src/include/wlioctl.h')
-rw-r--r--package/nvram/src/include/wlioctl.h1097
1 files changed, 1097 insertions, 0 deletions
diff --git a/package/nvram/src/include/wlioctl.h b/package/nvram/src/include/wlioctl.h
new file mode 100644
index 0000000..66783cc
--- /dev/null
+++ b/package/nvram/src/include/wlioctl.h
@@ -0,0 +1,1097 @@
+/*
+ * Custom OID/ioctl definitions for
+ * Broadcom 802.11abg Networking Device Driver
+ *
+ * Definitions subject to change without notice.
+ *
+ * Copyright 2004, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+
+#ifndef _wlioctl_h_
+#define _wlioctl_h_
+
+#include <typedefs.h>
+#include <proto/ethernet.h>
+#include <proto/802.11.h>
+
+#if defined(__GNUC__)
+#define PACKED __attribute__((packed))
+#else
+#define PACKED
+#endif
+
+#define WLC_ESSID_MAX_SIZE 32
+
+#define WL_NUMRATES 255 /* max # of rates in a rateset */
+
+typedef struct wl_rateset {
+ uint32 count; /* # rates in this set */
+ uint8 rates[WL_NUMRATES]; /* rates in 500kbps units w/hi bit set if basic */
+} wl_rateset_t;
+
+#define WL_CHANSPEC_CHAN_MASK 0x0fff
+#define WL_CHANSPEC_BAND_MASK 0xf000
+#define WL_CHANSPEC_BAND_SHIFT 12
+#define WL_CHANSPEC_BAND_A 0x1000
+#define WL_CHANSPEC_BAND_B 0x2000
+
+/*
+ * Per-bss information structure.
+ */
+
+#define WL_LEGACY_BSS_INFO_VERSION 106 /* an older supported version of wl_bss_info struct */
+#define WL_BSS_INFO_VERSION 107 /* current version of wl_bss_info struct */
+
+typedef struct wl_bss_info106 {
+ uint version; /* version field */
+ struct ether_addr BSSID;
+ uint8 SSID_len;
+ uint8 SSID[32];
+ uint8 Privacy; /* 0=No WEP, 1=Use WEP */
+ int16 RSSI; /* receive signal strength (in dBm) */
+ uint16 beacon_period; /* units are Kusec */
+ uint16 atim_window; /* units are Kusec */
+ uint8 channel; /* Channel no. */
+ int8 infra; /* 0=IBSS, 1=infrastructure, 2=unknown */
+ struct {
+ uint count; /* # rates in this set */
+ uint8 rates[12]; /* rates in 500kbps units w/hi bit set if basic */
+ } rateset; /* supported rates */
+ uint8 dtim_period; /* DTIM period */
+ int8 phy_noise; /* noise right after tx (in dBm) */
+ uint16 capability; /* Capability information */
+ struct dot11_bcn_prb *prb; /* probe response frame (ioctl na) */
+ uint16 prb_len; /* probe response frame length (ioctl na) */
+ struct {
+ uint8 supported; /* wpa supported */
+ uint8 multicast; /* multicast cipher */
+ uint8 ucount; /* count of unicast ciphers */
+ uint8 unicast[4]; /* unicast ciphers */
+ uint8 acount; /* count of auth modes */
+ uint8 auth[4]; /* Authentication modes */
+ } wpa;
+} wl_bss_info106_t;
+
+typedef struct wl_bss_info {
+ uint32 version; /* version field */
+ uint32 length; /* byte length of data in this record, starting at version and including IEs */
+ struct ether_addr BSSID;
+ uint16 beacon_period; /* units are Kusec */
+ uint16 capability; /* Capability information */
+ uint8 SSID_len;
+ uint8 SSID[32];
+ struct {
+ uint count; /* # rates in this set */
+ uint8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */
+ } rateset; /* supported rates */
+ uint8 channel; /* Channel no. */
+ uint16 atim_window; /* units are Kusec */
+ uint8 dtim_period; /* DTIM period */
+ int16 RSSI; /* receive signal strength (in dBm) */
+ int8 phy_noise; /* noise (in dBm) */
+ uint32 ie_length; /* byte length of Information Elements */
+ /* variable length Information Elements */
+} wl_bss_info_t;
+
+typedef struct wlc_ssid {
+ uint32 SSID_len;
+ uchar SSID[32];
+} wlc_ssid_t;
+
+typedef struct wl_scan_params {
+ wlc_ssid_t ssid; /* default is {0, ""} */
+ struct ether_addr bssid;/* default is bcast */
+ int8 bss_type; /* default is any, DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT */
+ int8 scan_type; /* -1 use default, DOT11_SCANTYPE_ACTIVE/PASSIVE */
+ int32 nprobes; /* -1 use default, number of probes per channel */
+ int32 active_time; /* -1 use default, dwell time per channel for active scanning */
+ int32 passive_time; /* -1 use default, dwell time per channel for passive scanning */
+ int32 home_time; /* -1 use default, dwell time for the home channel between channel scans */
+ int32 channel_num; /* 0 use default (all available channels), count of channels in channel_list */
+ uint16 channel_list[1]; /* list of chanspecs */
+} wl_scan_params_t;
+/* size of wl_scan_params not including variable length array */
+#define WL_SCAN_PARAMS_FIXED_SIZE 64
+
+typedef struct wl_scan_results {
+ uint32 buflen;
+ uint32 version;
+ uint32 count;
+ wl_bss_info_t bss_info[1];
+} wl_scan_results_t;
+/* size of wl_scan_results not including variable length array */
+#define WL_SCAN_RESULTS_FIXED_SIZE 12
+
+/* uint32 list */
+typedef struct wl_uint32_list {
+ /* in - # of elements, out - # of entries */
+ uint32 count;
+ /* variable length uint32 list */
+ uint32 element[1];
+} wl_uint32_list_t;
+
+#define WLC_CNTRY_BUF_SZ 4 /* Country string is 3 bytes + NULL */
+
+typedef struct wl_channels_in_country {
+ uint32 buflen;
+ uint32 band;
+ char country_abbrev[WLC_CNTRY_BUF_SZ];
+ uint32 count;
+ uint32 channel[1];
+} wl_channels_in_country_t;
+
+typedef struct wl_country_list {
+ uint32 buflen;
+ uint32 band_set;
+ uint32 band;
+ uint32 count;
+ char country_abbrev[1];
+} wl_country_list_t;
+
+#define WL_RM_TYPE_BASIC 1
+#define WL_RM_TYPE_CCA 2
+#define WL_RM_TYPE_RPI 3
+
+#define WL_RM_FLAG_PARALLEL (1<<0)
+
+#define WL_RM_FLAG_LATE (1<<1)
+#define WL_RM_FLAG_INCAPABLE (1<<2)
+#define WL_RM_FLAG_REFUSED (1<<3)
+
+typedef struct wl_rm_req_elt {
+ int8 type;
+ int8 flags;
+ uint16 chanspec;
+ uint32 token; /* token for this measurement */
+ uint32 tsf_h; /* TSF high 32-bits of Measurement start time */
+ uint32 tsf_l; /* TSF low 32-bits */
+ uint32 dur; /* TUs */
+} wl_rm_req_elt_t;
+
+typedef struct wl_rm_req {
+ uint32 token; /* overall measurement set token */
+ uint32 count; /* number of measurement reqests */
+ wl_rm_req_elt_t req[1]; /* variable length block of requests */
+} wl_rm_req_t;
+#define WL_RM_REQ_FIXED_LEN 8
+
+typedef struct wl_rm_rep_elt {
+ int8 type;
+ int8 flags;
+ uint16 chanspec;
+ uint32 token; /* token for this measurement */
+ uint32 tsf_h; /* TSF high 32-bits of Measurement start time */
+ uint32 tsf_l; /* TSF low 32-bits */
+ uint32 dur; /* TUs */
+ uint32 len; /* byte length of data block */
+ uint8 data[1]; /* variable length data block */
+} wl_rm_rep_elt_t;
+#define WL_RM_REP_ELT_FIXED_LEN 24 /* length excluding data block */
+
+#define WL_RPI_REP_BIN_NUM 8
+typedef struct wl_rm_rpi_rep {
+ uint8 rpi[WL_RPI_REP_BIN_NUM];
+ int8 rpi_max[WL_RPI_REP_BIN_NUM];
+} wl_rm_rpi_rep_t;
+
+typedef struct wl_rm_rep {
+ uint32 token; /* overall measurement set token */
+ uint32 len; /* length of measurement report block */
+ wl_rm_rep_elt_t rep[1]; /* variable length block of reports */
+} wl_rm_rep_t;
+#define WL_RM_REP_FIXED_LEN 8
+
+
+#define WLC_MAX_KEY_SIZE 32 /* max size of any key */
+#define WLC_MAX_IV_SIZE 16 /* max size of any IV */
+#define WLC_EXT_IV_FLAG (1<<5) /* flag to indicate IV is > 4 bytes */
+#define WLC_MAX_DEFAULT_KEYS 4 /* # of default WEP keys */
+#define WLC_MAX_KEYS 54 /* Max # of WEP keys */
+#define WLC_WEP1_KEY_SIZE 5 /* max size of any WEP key */
+#define WLC_WEP1_KEY_HEX_SIZE 10 /* size of WEP key in hex. */
+#define WLC_WEP128_KEY_SIZE 13 /* max size of any WEP key */
+#define WLC_WEP128_KEY_HEX_SIZE 26 /* size of WEP key in hex. */
+#define WLC_TKIP_MIC_SIZE 8 /* size of TKIP MIC */
+#define WLC_TKIP_EOM_SIZE 7 /* max size of TKIP EOM */
+#define WLC_TKIP_EOM_FLAG 0x5a /* TKIP EOM flag byte */
+#define WLC_TKIP_KEY_SIZE 32 /* size of any TKIP key */
+#define WLC_TKIP_MIC_AUTH_TX 16 /* offset to Authenticator MIC TX key */
+#define WLC_TKIP_MIC_AUTH_RX 24 /* offset to Authenticator MIC RX key */
+#define WLC_TKIP_MIC_SUP_RX 16 /* offset to Supplicant MIC RX key */
+#define WLC_TKIP_MIC_SUP_TX 24 /* offset to Supplicant MIC TX key */
+#define WLC_TKIP_P1_KEY_SIZE 10 /* size of TKHash Phase1 output, in bytes */
+#define WLC_TKIP_P2_KEY_SIZE 16 /* size of TKHash Phase2 output */
+#define WLC_AES_KEY_SIZE 16 /* size of AES key */
+
+
+typedef enum sup_auth_status {
+ WLC_SUP_DISCONNECTED = 0,
+ WLC_SUP_CONNECTING,
+ WLC_SUP_IDREQUIRED,
+ WLC_SUP_AUTHENTICATING,
+ WLC_SUP_AUTHENTICATED,
+ WLC_SUP_KEYXCHANGE,
+ WLC_SUP_KEYED
+} sup_auth_status_t;
+
+/* Enumerate crypto algorithms */
+#define CRYPTO_ALGO_OFF 0
+#define CRYPTO_ALGO_WEP1 1
+#define CRYPTO_ALGO_TKIP 2
+#define CRYPTO_ALGO_WEP128 3
+#define CRYPTO_ALGO_AES_CCM 4
+#define CRYPTO_ALGO_AES_OCB_MSDU 5
+#define CRYPTO_ALGO_AES_OCB_MPDU 6
+#define CRYPTO_ALGO_NALG 7
+
+#define WSEC_GEN_MIC_ERROR 0x0001
+#define WSEC_GEN_REPLAY 0x0002
+
+#define WL_SOFT_KEY (1 << 0) /* Indicates this key is using soft encrypt */
+#define WL_PRIMARY_KEY (1 << 1) /* Indicates this key is the primary (ie tx) key */
+#define WL_KF_RES_4 (1 << 4) /* Reserved for backward compat */
+#define WL_KF_RES_5 (1 << 5) /* Reserved for backward compat */
+
+
+typedef struct wlc_tkip_info {
+ uint16 phase1[WLC_TKIP_P1_KEY_SIZE/sizeof(uint16)]; /* tkhash phase1 result */
+ uint8 phase2[WLC_TKIP_P2_KEY_SIZE]; /* tkhash phase2 result */
+ uint32 micl;
+ uint32 micr;
+} tkip_info_t;
+
+typedef struct _wsec_iv {
+ uint32 hi; /* upper 32 bits of IV */
+ uint16 lo; /* lower 16 bits of IV */
+} wsec_iv_t;
+
+typedef struct wsec_key {
+ uint32 index; /* key index */
+ uint32 len; /* key length */
+ uint8 data[WLC_MAX_KEY_SIZE]; /* key data */
+ tkip_info_t tkip_tx; /* tkip transmit state */
+ tkip_info_t tkip_rx; /* tkip receive state */
+ uint32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
+ uint32 flags; /* misc flags */
+ uint32 algo_hw; /* cache for hw register*/
+ uint32 aes_mode; /* cache for hw register*/
+ int iv_len; /* IV length */
+ int iv_initialized; /* has IV been initialized already? */
+ int icv_len; /* ICV length */
+ wsec_iv_t rxiv; /* Rx IV */
+ wsec_iv_t txiv; /* Tx IV */
+ struct ether_addr ea; /* per station */
+} wsec_key_t;
+
+
+
+typedef struct wl_wsec_key {
+ uint32 index; /* key index */
+ uint32 len; /* key length */
+ uint8 data[DOT11_MAX_KEY_SIZE]; /* key data */
+ uint32 pad_1[18];
+ uint32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
+ uint32 flags; /* misc flags */
+ uint32 pad_2[2];
+ int pad_3;
+ int iv_initialized; /* has IV been initialized already? */
+ int pad_4;
+ /* Rx IV */
+ struct {
+ uint32 hi; /* upper 32 bits of IV */
+ uint16 lo; /* lower 16 bits of IV */
+ } rxiv;
+ uint32 pad_5[2];
+ struct ether_addr ea; /* per station */
+} wl_wsec_key_t;
+
+/* For use with wlc_wep_key.flags */
+#define WSEC_PRIMARY_KEY (1 << 1) /* Indicates this key is the primary (ie tx) key */
+#define WSEC_TKIP_ERROR (1 << 2) /* Provoke deliberate error */
+
+#define WSEC_MIN_PSK_LEN 8
+#define WSEC_MAX_PSK_LEN 64
+
+/* Flag for key material needing passhash'ing */
+#define WSEC_PASSPHRASE (1<<0)
+
+/* recepticle for WLC_SET_WSEC_PMK parameter */
+typedef struct {
+ ushort key_len; /* octets in key material */
+ ushort flags; /* key handling qualification */
+ uint8 key[WSEC_MAX_PSK_LEN]; /* PMK material */
+} wsec_pmk_t;
+
+/* wireless security bitvec */
+#define WEP_ENABLED 1
+#define TKIP_ENABLED 2
+#define AES_ENABLED 4
+#define WSEC_SWFLAG 8
+
+#define WSEC_SW(wsec) ((wsec) & WSEC_SWFLAG)
+#define WSEC_HW(wsec) (!WSEC_SW(wsec))
+#define WSEC_WEP_ENABLED(wsec) ((wsec) & WEP_ENABLED)
+#define WSEC_TKIP_ENABLED(wsec) ((wsec) & TKIP_ENABLED)
+#define WSEC_AES_ENABLED(wsec) ((wsec) & AES_ENABLED)
+#define WSEC_ENABLED(wsec) ((wsec) & (WEP_ENABLED | TKIP_ENABLED | AES_ENABLED))
+
+
+/* wireless authentication bit vector */
+#define WPA_ENABLED 1
+#define PSK_ENABLED 2
+
+#define WAUTH_WPA_ENABLED(wauth) ((wauth) & WPA_ENABLED)
+#define WAUTH_PSK_ENABLED(wauth) ((wauth) & PSK_ENABLED)
+#define WAUTH_ENABLED(wauth) ((wauth) & (WPA_ENABLED | PSK_ENABLED))
+
+/* group/mcast cipher */
+#define WPA_MCAST_CIPHER(wsec) (((wsec) & TKIP_ENABLED) ? WPA_CIPHER_TKIP : \
+ ((wsec) & AES_ENABLED) ? WPA_CIPHER_AES_CCM : \
+ WPA_CIPHER_NONE)
+
+
+typedef struct wl_led_info {
+ uint32 index; /* led index */
+ uint32 behavior;
+ bool activehi;
+} wl_led_info_t;
+
+/*
+ * definitions for driver messages passed from WL to NAS.
+ */
+/* Use this to recognize wpa and 802.1x driver messages. */
+static const uint8 wl_wpa_snap_template[] =
+ { 0xaa, 0xaa, 0x03, 0x00, 0x90, 0x4c };
+
+#define WL_WPA_MSG_IFNAME_MAX 16
+
+/* WPA driver message */
+typedef struct wl_wpa_header {
+ struct ether_header eth;
+ struct dot11_llc_snap_header snap;
+ uint8 version;
+ uint8 type;
+ /* version 2 additions */
+ char ifname[WL_WPA_MSG_IFNAME_MAX];
+ /* version specific data */
+ /* uint8 data[1]; */
+} wl_wpa_header_t PACKED;
+
+/*
+ * definitions for 802.2 messages passed from WL to NAS.
+ */
+/* This seems not to be defined outside the kernel on linux. */
+#ifndef ETH_P_802_2
+#define ETH_P_802_2 4
+#endif
+
+#define WL_WPA_HEADER_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN + 2 + WL_WPA_MSG_IFNAME_MAX)
+
+/* WPA driver message ethertype - private between wlc and nas */
+#define WL_WPA_ETHER_TYPE 0x9999
+
+/* WPA driver message current version */
+#define WL_WPA_MSG_VERSION 2
+
+/* Type field values for the 802.2 driver messages for WPA. */
+#define WLC_ASSOC_MSG 1
+#define WLC_DISASSOC_MSG 2
+#define WLC_PTK_MIC_MSG 3
+#define WLC_GTK_MIC_MSG 4
+
+/* Use this to recognize 802.2 driver messages. */
+static const uint8 wpa_snap_template[] =
+ { 0xaa, 0xaa, 0x03, 0x00, 0x90, 0x4c };
+
+
+/* 802.1x driver message */
+typedef struct wl_eapol_header {
+ struct ether_header eth;
+ struct dot11_llc_snap_header snap;
+ uint8 version;
+ uint8 reserved;
+ char ifname[WL_WPA_MSG_IFNAME_MAX];
+ /* version specific data */
+ /* uint8 802_1x_msg[1]; */
+} wl_eapol_header_t PACKED;
+
+#define WL_EAPOL_HEADER_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN + 2 + WL_WPA_MSG_IFNAME_MAX)
+
+/* 802.1x driver message ethertype - private between wlc and nas */
+#define WL_EAPOL_ETHER_TYPE 0x999A
+
+/* 802.1x driver message current version */
+#define WL_EAPOL_MSG_VERSION 1
+
+/* srom read/write struct passed through ioctl */
+typedef struct {
+ uint byteoff; /* byte offset */
+ uint nbytes; /* number of bytes */
+ uint16 buf[1];
+} srom_rw_t;
+
+/* R_REG and W_REG struct passed through ioctl */
+typedef struct {
+ uint32 byteoff; /* byte offset of the field in d11regs_t */
+ uint32 val; /* read/write value of the field */
+ uint32 size; /* sizeof the field */
+} rw_reg_t;
+
+/* Structure used by GET/SET_ATTEN ioctls */
+typedef struct {
+ uint16 auto_ctrl; /* 1: Automatic control, 0: overriden */
+ uint16 bb; /* Baseband attenuation */
+ uint16 radio; /* Radio attenuation */
+ uint16 txctl1; /* Radio TX_CTL1 value */
+} atten_t;
+
+/* Used to get specific STA parameters */
+typedef struct {
+ uint32 val;
+ struct ether_addr ea;
+} scb_val_t;
+
+/* callback registration data types */
+
+typedef struct _mac_event_params {
+ uint msg;
+ struct ether_addr *addr;
+ uint result;
+ uint status;
+ uint auth_type;
+} mac_event_params_t;
+
+typedef struct _mic_error_params {
+ struct ether_addr *ea;
+ bool group;
+ bool flush_txq;
+} mic_error_params_t;
+
+typedef enum _wl_callback {
+ WL_MAC_EVENT_CALLBACK = 0,
+ WL_LINK_UP_CALLBACK,
+ WL_LINK_DOWN_CALLBACK,
+ WL_MIC_ERROR_CALLBACK,
+ WL_LAST_CALLBACK
+} wl_callback_t;
+
+typedef struct _callback {
+ void (*fn)(void *, void *);
+ void *context;
+} callback_t;
+
+typedef struct _scan_callback {
+ void (*fn)(void *);
+ void *context;
+} scan_callback_t;
+
+/* used to register an arbitrary callback via the IOCTL interface */
+typedef struct _set_callback {
+ int index;
+ callback_t callback;
+} set_callback_t;
+
+
+
+/* Event data type */
+typedef struct {
+ uint msg; /* Message (see below) */
+ struct ether_addr *addr; /* Station address (if applicable) */
+ uint status; /* Status code (see below) */
+ uint reason; /* Reason code (if applicable) */
+ uint auth_type; /* WLC_E_AUTH */
+ bool link; /* WLC_E_LINK */
+ bool group; /* WLC_E_MIC_ERROR */
+ bool flush_txq; /* WLC_E_MIC_ERROR */
+} wlc_event_t;
+
+typedef struct {
+ uint16 ver; /* version of this struct */
+ uint16 cap; /* sta's advertized capabilities */
+ uint32 flags; /* flags defined below */
+ uint32 idle; /* time since data pkt rx'd from sta */
+ struct ether_addr ea; /* Station address */
+ wl_rateset_t rateset; /* rateset in use */
+} sta_info_t;
+
+#define WL_STA_INFO_LEN 300
+#define WL_STA_VER 1
+
+/* flags fields */
+#define WL_STA_BRCM 0x01
+#define WL_STA_WME 0x02
+#define WL_STA_ABCAP 0x04
+#define WL_STA_AUTHE 0x08
+#define WL_STA_ASSOC 0x10
+#define WL_STA_AUTHO 0x20
+
+/* Event messages */
+#define WLC_E_SET_SSID 1
+#define WLC_E_JOIN 2
+#define WLC_E_START 3
+#define WLC_E_AUTH 4
+#define WLC_E_AUTH_IND 5
+#define WLC_E_DEAUTH 6
+#define WLC_E_DEAUTH_IND 7
+#define WLC_E_ASSOC 8
+#define WLC_E_ASSOC_IND 9
+#define WLC_E_REASSOC 10
+#define WLC_E_REASSOC_IND 11
+#define WLC_E_DISASSOC 12
+#define WLC_E_DISASSOC_IND 13
+#define WLC_E_QUIET_START 14 /* 802.11h Quiet period started */
+#define WLC_E_QUIET_END 15 /* 802.11h Quiet period ended */
+#define WLC_E_GOT_BEACONS 16
+#define WLC_E_LINK 17 /* Link indication */
+#define WLC_E_MIC_ERROR 18 /* TKIP MIC error occurred */
+#define WLC_E_NDIS_LINK 19 /* NDIS style link indication */
+#define WLC_E_ROAM 20
+#define WLC_E_LAST 21
+
+/* Event status codes */
+#define WLC_E_STATUS_SUCCESS 0
+#define WLC_E_STATUS_FAIL 1
+#define WLC_E_STATUS_TIMEOUT 2
+#define WLC_E_STATUS_NO_NETWORKS 3
+#define WLC_E_STATUS_ABORT 4
+
+typedef struct wlc_event_cb {
+ uint msg; /* Event message or 0 for all */
+ void (*fn)(void *, wlc_event_t *); /* Callback function */
+ void *context; /* Passed to callback function */
+ struct wlc_event_cb *next; /* Next in the chain */
+} wlc_event_cb_t;
+
+/*
+ * Country locale determines which channels are available to us.
+ */
+typedef enum _wlc_locale {
+ WLC_WW = 0, /* Worldwide */
+ WLC_THA, /* Thailand */
+ WLC_ISR, /* Israel */
+ WLC_JDN, /* Jordan */
+ WLC_PRC, /* China */
+ WLC_JPN, /* Japan */
+ WLC_FCC, /* USA */
+ WLC_EUR, /* Europe */
+ WLC_USL, /* US Low Band only */
+ WLC_JPH, /* Japan High Band only */
+ WLC_ALL, /* All the channels in this band */
+ WLC_11D, /* Represents locale recieved by 11d beacons */
+ WLC_LAST_LOCALE,
+ WLC_UNDEFINED_LOCALE = 0xf
+} wlc_locale_t;
+
+/* channel encoding */
+typedef struct channel_info {
+ int hw_channel;
+ int target_channel;
+ int scan_channel;
+} channel_info_t;
+
+/* For ioctls that take a list of MAC addresses */
+struct maclist {
+ uint count; /* number of MAC addresses */
+ struct ether_addr ea[1]; /* variable length array of MAC addresses */
+};
+
+/* get pkt count struct passed through ioctl */
+typedef struct get_pktcnt {
+ uint rx_good_pkt;
+ uint rx_bad_pkt;
+ uint tx_good_pkt;
+ uint tx_bad_pkt;
+} get_pktcnt_t;
+
+/* Linux network driver ioctl encoding */
+typedef struct wl_ioctl {
+ uint cmd; /* common ioctl definition */
+ void *buf; /* pointer to user buffer */
+ uint len; /* length of user buffer */
+ bool set; /* get or set request (optional) */
+ uint used; /* bytes read or written (optional) */
+ uint needed; /* bytes needed (optional) */
+} wl_ioctl_t;
+
+/*
+ * Structure for passing hardware and software
+ * revision info up from the driver.
+ */
+typedef struct wlc_rev_info {
+ uint vendorid; /* PCI vendor id */
+ uint deviceid; /* device id of chip */
+ uint radiorev; /* radio revision */
+ uint chiprev; /* chip revision */
+ uint corerev; /* core revision */
+ uint boardid; /* board identifier (usu. PCI sub-device id) */
+ uint boardvendor; /* board vendor (usu. PCI sub-vendor id) */
+ uint boardrev; /* board revision */
+ uint driverrev; /* driver version */
+ uint ucoderev; /* microcode version */
+ uint bus; /* bus type */
+ uint chipnum; /* chip number */
+} wlc_rev_info_t;
+
+/* check this magic number */
+#define WLC_IOCTL_MAGIC 0x14e46c77
+
+/* bump this number if you change the ioctl interface */
+#define WLC_IOCTL_VERSION 1
+
+/* maximum length buffer required */
+#define WLC_IOCTL_MAXLEN 8192
+
+/* maximum length buffer required */
+#define WLC_IOCTL_SMLEN 256
+
+/* common ioctl definitions */
+#define WLC_GET_MAGIC 0
+#define WLC_GET_VERSION 1
+#define WLC_UP 2
+#define WLC_DOWN 3
+#define WLC_GET_LOOP 4
+#define WLC_SET_LOOP 5
+#define WLC_DUMP 6
+#define WLC_GET_MSGLEVEL 7
+#define WLC_SET_MSGLEVEL 8
+#define WLC_GET_PROMISC 9
+#define WLC_SET_PROMISC 10
+#define WLC_OBSOLETE 11
+#define WLC_GET_RATE 12
+#define WLC_SET_RATE 13
+#define WLC_GET_INSTANCE 14
+#define WLC_GET_FRAG 15
+#define WLC_SET_FRAG 16
+#define WLC_GET_RTS 17
+#define WLC_SET_RTS 18
+#define WLC_GET_INFRA 19
+#define WLC_SET_INFRA 20
+#define WLC_GET_AUTH 21
+#define WLC_SET_AUTH 22
+#define WLC_GET_BSSID 23
+#define WLC_SET_BSSID 24
+#define WLC_GET_SSID 25
+#define WLC_SET_SSID 26
+#define WLC_RESTART 27
+#define WLC_DUMP_SCB 28
+#define WLC_GET_CHANNEL 29
+#define WLC_SET_CHANNEL 30
+#define WLC_GET_SRL 31
+#define WLC_SET_SRL 32
+#define WLC_GET_LRL 33
+#define WLC_SET_LRL 34
+#define WLC_GET_PLCPHDR 35
+#define WLC_SET_PLCPHDR 36
+#define WLC_GET_RADIO 37
+#define WLC_SET_RADIO 38
+#define WLC_GET_PHYTYPE 39
+#define WLC_DUMP_RATE 40
+#define WLC_SET_RATE_PARAMS 41
+#define WLC_GET_WEP 42
+#define WLC_SET_WEP 43
+#define WLC_GET_KEY 44
+#define WLC_SET_KEY 45
+#define WLC_GET_REGULATORY 46
+#define WLC_SET_REGULATORY 47
+#define WLC_GET_PASSIVE 48 /* added by nbd */
+#define WLC_SET_PASSIVE 49 /* added by nbd */
+#define WLC_SCAN 50
+#define WLC_SCAN_RESULTS 51
+#define WLC_DISASSOC 52
+#define WLC_REASSOC 53
+#define WLC_GET_ROAM_TRIGGER 54
+#define WLC_SET_ROAM_TRIGGER 55
+#define WLC_GET_ROAM_DELTA 56
+#define WLC_SET_ROAM_DELTA 57
+#define WLC_GET_ROAM_SCAN_PERIOD 58
+#define WLC_SET_ROAM_SCAN_PERIOD 59
+#define WLC_EVM 60
+#define WLC_GET_TXANT 61
+#define WLC_SET_TXANT 62
+#define WLC_GET_ANTDIV 63
+#define WLC_SET_ANTDIV 64
+#define WLC_GET_TXPWR 65
+#define WLC_SET_TXPWR 66
+#define WLC_GET_CLOSED 67
+#define WLC_SET_CLOSED 68
+#define WLC_GET_MACLIST 69
+#define WLC_SET_MACLIST 70
+#define WLC_GET_RATESET 71
+#define WLC_SET_RATESET 72
+#define WLC_GET_LOCALE 73
+#define WLC_SET_LOCALE 74
+#define WLC_GET_BCNPRD 75
+#define WLC_SET_BCNPRD 76
+#define WLC_GET_DTIMPRD 77
+#define WLC_SET_DTIMPRD 78
+#define WLC_GET_SROM 79
+#define WLC_SET_SROM 80
+#define WLC_GET_WEP_RESTRICT 81
+#define WLC_SET_WEP_RESTRICT 82
+#define WLC_GET_COUNTRY 83
+#define WLC_SET_COUNTRY 84
+#define WLC_GET_PM 85
+#define WLC_SET_PM 86
+#define WLC_GET_WAKE 87
+#define WLC_SET_WAKE 88
+#define WLC_GET_D11CNTS 89
+#define WLC_GET_FORCELINK 90 /* ndis only */
+#define WLC_SET_FORCELINK 91 /* ndis only */
+#define WLC_FREQ_ACCURACY 92
+#define WLC_CARRIER_SUPPRESS 93
+#define WLC_GET_PHYREG 94
+#define WLC_SET_PHYREG 95
+#define WLC_GET_RADIOREG 96
+#define WLC_SET_RADIOREG 97
+#define WLC_GET_REVINFO 98
+#define WLC_GET_UCANTDIV 99
+#define WLC_SET_UCANTDIV 100
+#define WLC_R_REG 101
+#define WLC_W_REG 102
+#define WLC_DIAG_LOOPBACK 103
+#define WLC_RESET_D11CNTS 104
+#define WLC_GET_MACMODE 105
+#define WLC_SET_MACMODE 106
+#define WLC_GET_MONITOR 107 /* added by nbd */
+#define WLC_SET_MONITOR 108 /* added by nbd */
+#define WLC_GET_GMODE 109
+#define WLC_SET_GMODE 110
+#define WLC_GET_LEGACY_ERP 111
+#define WLC_SET_LEGACY_ERP 112
+#define WLC_GET_RX_ANT 113
+#define WLC_GET_CURR_RATESET 114 /* current rateset */
+#define WLC_GET_SCANSUPPRESS 115
+#define WLC_SET_SCANSUPPRESS 116
+#define WLC_GET_AP 117
+#define WLC_SET_AP 118
+#define WLC_GET_EAP_RESTRICT 119
+#define WLC_SET_EAP_RESTRICT 120
+#define WLC_SCB_AUTHORIZE 121
+#define WLC_SCB_DEAUTHORIZE 122
+#define WLC_GET_WDSLIST 123
+#define WLC_SET_WDSLIST 124
+#define WLC_GET_ATIM 125
+#define WLC_SET_ATIM 126
+#define WLC_GET_RSSI 127
+#define WLC_GET_PHYANTDIV 128
+#define WLC_SET_PHYANTDIV 129
+#define WLC_AP_RX_ONLY 130
+#define WLC_GET_TX_PATH_PWR 131
+#define WLC_SET_TX_PATH_PWR 132
+#define WLC_GET_WSEC 133
+#define WLC_SET_WSEC 134
+#define WLC_GET_PHY_NOISE 135
+#define WLC_GET_BSS_INFO 136
+#define WLC_GET_PKTCNTS 137
+#define WLC_GET_LAZYWDS 138
+#define WLC_SET_LAZYWDS 139
+#define WLC_GET_BANDLIST 140
+#define WLC_GET_BAND 141
+#define WLC_SET_BAND 142
+#define WLC_SCB_DEAUTHENTICATE 143
+#define WLC_GET_SHORTSLOT 144
+#define WLC_GET_SHORTSLOT_OVERRIDE 145
+#define WLC_SET_SHORTSLOT_OVERRIDE 146
+#define WLC_GET_SHORTSLOT_RESTRICT 147
+#define WLC_SET_SHORTSLOT_RESTRICT 148
+#define WLC_GET_GMODE_PROTECTION 149
+#define WLC_GET_GMODE_PROTECTION_OVERRIDE 150
+#define WLC_SET_GMODE_PROTECTION_OVERRIDE 151
+#define WLC_UPGRADE 152
+#define WLC_GET_MRATE 153
+#define WLC_SET_MRATE 154
+#define WLC_GET_IGNORE_BCNS 155
+#define WLC_SET_IGNORE_BCNS 156
+#define WLC_GET_SCB_TIMEOUT 157
+#define WLC_SET_SCB_TIMEOUT 158
+#define WLC_GET_ASSOCLIST 159
+#define WLC_GET_CLK 160
+#define WLC_SET_CLK 161
+#define WLC_GET_UP 162
+#define WLC_OUT 163
+#define WLC_GET_WPA_AUTH 164
+#define WLC_SET_WPA_AUTH 165
+#define WLC_GET_UCFLAGS 166
+#define WLC_SET_UCFLAGS 167
+#define WLC_GET_PWRIDX 168
+#define WLC_SET_PWRIDX 169
+#define WLC_GET_TSSI 170
+#define WLC_GET_SUP_RATESET_OVERRIDE 171
+#define WLC_SET_SUP_RATESET_OVERRIDE 172
+#define WLC_SET_FAST_TIMER 173
+#define WLC_GET_FAST_TIMER 174
+#define WLC_SET_SLOW_TIMER 175
+#define WLC_GET_SLOW_TIMER 176
+#define WLC_DUMP_PHYREGS 177
+#define WLC_GET_GMODE_PROTECTION_CONTROL 178
+#define WLC_SET_GMODE_PROTECTION_CONTROL 179
+#define WLC_GET_PHYLIST 180
+#define WLC_ENCRYPT_STRENGTH 181 /* ndis only */
+#define WLC_DECRYPT_STATUS 182 /* ndis only */
+#define WLC_GET_KEY_SEQ 183
+#define WLC_GET_SCAN_CHANNEL_TIME 184
+#define WLC_SET_SCAN_CHANNEL_TIME 185
+#define WLC_GET_SCAN_UNASSOC_TIME 186
+#define WLC_SET_SCAN_UNASSOC_TIME 187
+#define WLC_GET_SCAN_HOME_TIME 188
+#define WLC_SET_SCAN_HOME_TIME 189
+#define WLC_GET_SCAN_PASSES 190
+#define WLC_SET_SCAN_PASSES 191
+#define WLC_GET_PRB_RESP_TIMEOUT 192
+#define WLC_SET_PRB_RESP_TIMEOUT 193
+#define WLC_GET_ATTEN 194
+#define WLC_SET_ATTEN 195
+#define WLC_GET_SHMEM 196 /* diag */
+#define WLC_SET_SHMEM 197 /* diag */
+#define WLC_GET_GMODE_PROTECTION_CTS 198
+#define WLC_SET_GMODE_PROTECTION_CTS 199
+#define WLC_SET_TKIP_MIC_FLAG 200
+#define WLC_SCB_DEAUTHENTICATE_FOR_REASON 201
+#define WLC_TKIP_COUNTERMEASURES 202
+#define WLC_GET_PIOMODE 203
+#define WLC_SET_PIOMODE 204
+#define WLC_SET_LED 209
+#define WLC_GET_LED 210
+#define WLC_GET_INTERFERENCE_MODE 211
+#define WLC_SET_INTERFERENCE_MODE 212
+#define WLC_GET_CHANNEL_QA 213
+#define WLC_START_CHANNEL_QA 214
+#define WLC_GET_CHANNEL_SEL 215
+#define WLC_START_CHANNEL_SEL 216
+#define WLC_GET_VALID_CHANNELS 217
+#define WLC_GET_FAKEFRAG 218
+#define WLC_SET_FAKEFRAG 219
+#define WLC_GET_PWROUT_PERCENTAGE 220
+#define WLC_SET_PWROUT_PERCENTAGE 221
+#define WLC_SET_BAD_FRAME_PREEMPT 222
+#define WLC_GET_BAD_FRAME_PREEMPT 223
+#define WLC_SET_LEAP_LIST 224
+#define WLC_GET_LEAP_LIST 225
+#define WLC_GET_CWMIN 226
+#define WLC_SET_CWMIN 227
+#define WLC_GET_CWMAX 228
+#define WLC_SET_CWMAX 229
+#define WLC_GET_WET 230
+#define WLC_SET_WET 231
+#define WLC_GET_KEY_PRIMARY 235
+#define WLC_SET_KEY_PRIMARY 236
+#define WLC_SCAN_WITH_CALLBACK 240
+#define WLC_WDS_GET_REMOTE_HWADDR 246 /* currently handled in wl_linux.c/wl_vx.c */
+#define WLC_SET_CS_SCAN_TIMER 248
+#define WLC_GET_CS_SCAN_TIMER 249
+#define WLC_CURRENT_PWR 256
+#define WLC_GET_CHANNELS_IN_COUNTRY 260
+#define WLC_GET_COUNTRY_LIST 261
+#define WLC_GET_VAR 262 /* get value of named variable */
+#define WLC_SET_VAR 263 /* set named variable to value */
+#define WLC_NVRAM_GET 264
+#define WLC_NVRAM_SET 265
+#define WLC_SET_WSEC_PMK 268
+#define WLC_GET_AUTH_MODE 269
+#define WLC_SET_AUTH_MODE 270
+#define WLC_LAST 273 /* do not change - use get_var/set_var */
+
+/*
+ * Minor kludge alert:
+ * Duplicate a few definitions that irelay requires from epiioctl.h here
+ * so caller doesn't have to include this file and epiioctl.h .
+ * If this grows any more, it would be time to move these irelay-specific
+ * definitions out of the epiioctl.h and into a separate driver common file.
+ */
+#ifndef EPICTRL_COOKIE
+#define EPICTRL_COOKIE 0xABADCEDE
+#endif
+
+/* vx wlc ioctl's offset */
+#define CMN_IOCTL_OFF 0x180
+
+/*
+ * custom OID support
+ *
+ * 0xFF - implementation specific OID
+ * 0xE4 - first byte of Broadcom PCI vendor ID
+ * 0x14 - second byte of Broadcom PCI vendor ID
+ * 0xXX - the custom OID number
+ */
+
+/* begin 0x1f values beyond the start of the ET driver range. */
+#define WL_OID_BASE 0xFFE41420
+
+/* NDIS overrides */
+#define OID_WL_GETINSTANCE (WL_OID_BASE + WLC_GET_INSTANCE)
+#define OID_WL_GET_FORCELINK (WL_OID_BASE + WLC_GET_FORCELINK)
+#define OID_WL_SET_FORCELINK (WL_OID_BASE + WLC_SET_FORCELINK)
+#define OID_WL_ENCRYPT_STRENGTH (WL_OID_BASE + WLC_ENCRYPT_STRENGTH)
+#define OID_WL_DECRYPT_STATUS (WL_OID_BASE + WLC_DECRYPT_STATUS)
+
+#define WL_DECRYPT_STATUS_SUCCESS 1
+#define WL_DECRYPT_STATUS_FAILURE 2
+#define WL_DECRYPT_STATUS_UNKNOWN 3
+
+/* allows user-mode app to poll the status of USB image upgrade */
+#define WLC_UPGRADE_SUCCESS 0
+#define WLC_UPGRADE_PENDING 1
+
+/* Bit masks for radio disabled status - returned by WL_GET_RADIO */
+#define WL_RADIO_SW_DISABLE (1<<0)
+#define WL_RADIO_HW_DISABLE (1<<1)
+
+/* Override bit for WLC_SET_TXPWR. if set, ignore other level limits */
+#define WL_TXPWR_OVERRIDE (1<<31)
+
+
+/* Bus types */
+#define WL_SB_BUS 0 /* Silicon Backplane */
+#define WL_PCI_BUS 1 /* PCI target */
+#define WL_PCMCIA_BUS 2 /* PCMCIA target */
+
+/* band types */
+#define WLC_BAND_AUTO 0 /* auto-select */
+#define WLC_BAND_A 1 /* "a" band (5 Ghz) */
+#define WLC_BAND_B 2 /* "b" band (2.4 Ghz) */
+
+/* MAC list modes */
+#define WLC_MACMODE_DISABLED 0 /* MAC list disabled */
+#define WLC_MACMODE_DENY 1 /* Deny specified (i.e. allow unspecified) */
+#define WLC_MACMODE_ALLOW 2 /* Allow specified (i.e. deny unspecified) */
+
+
+/* 54g modes (basic bits may still be overridden) */
+#define GMODE_LEGACY_B 0 /* Rateset: 1b, 2b, 5.5, 11 */
+ /* Preamble: Long */
+ /* Shortslot: Off */
+#define GMODE_AUTO 1 /* Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54 */
+ /* Extended Rateset: 6, 9, 12, 48 */
+ /* Preamble: Long */
+ /* Shortslot: Auto */
+#define GMODE_ONLY 2 /* Rateset: 1b, 2b, 5.5b, 11b, 18, 24b, 36, 54 */
+ /* Extended Rateset: 6b, 9, 12b, 48 */
+ /* Preamble: Short required */
+ /* Shortslot: Auto */
+#define GMODE_B_DEFERRED 3 /* Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54 */
+ /* Extended Rateset: 6, 9, 12, 48 */
+ /* Preamble: Long */
+ /* Shortslot: On */
+#define GMODE_PERFORMANCE 4 /* Rateset: 1b, 2b, 5.5b, 6b, 9, 11b, 12b, 18, 24b, 36, 48, 54 */
+ /* Preamble: Short required */
+ /* Shortslot: On and required */
+#define GMODE_LRS 5 /* Rateset: 1b, 2b, 5.5b, 11b */
+ /* Extended Rateset: 6, 9, 12, 18, 24, 36, 48, 54 */
+ /* Preamble: Long */
+ /* Shortslot: Auto */
+#define GMODE_MAX 6
+
+
+/* values for PLCPHdr_override */
+#define WLC_PLCP_AUTO -1
+#define WLC_PLCP_SHORT 0
+#define WLC_PLCP_LONG 1
+
+/* values for g_protection_override */
+#define WLC_G_PROTECTION_AUTO -1
+#define WLC_G_PROTECTION_OFF 0
+#define WLC_G_PROTECTION_ON 1
+
+/* values for g_protection_control */
+#define WLC_G_PROTECTION_CTL_OFF 0
+#define WLC_G_PROTECTION_CTL_LOCAL 1
+#define WLC_G_PROTECTION_CTL_OVERLAP 2
+
+/* Values for PM */
+#define PM_OFF 0
+#define PM_MAX 1
+#define PM_FAST 2
+
+/* interference mitigation options */
+#define INTERFERE_NONE 0 /* off */
+#define NON_WLAN 1 /* foreign/non 802.11 interference, no auto detect */
+#define WLAN_MANUAL 2 /* ACI: no auto detection */
+#define WLAN_AUTO 3 /* ACI: auto - detact */
+
+/* Message levels */
+#define WL_ERROR_VAL 0x0001
+#define WL_TRACE_VAL 0x0002
+#define WL_PRHDRS_VAL 0x0004
+#define WL_PRPKT_VAL 0x0008
+#define WL_INFORM_VAL 0x0010
+#define WL_TMP_VAL 0x0020
+#define WL_OID_VAL 0x0040
+#define WL_RATE_VAL 0x0080
+#define WL_ASSOC_VAL 0x0100
+#define WL_PRUSR_VAL 0x0200
+#define WL_PS_VAL 0x0400
+#define WL_TXPWR_VAL 0x0800
+#define WL_GMODE_VAL 0x1000
+#define WL_DUAL_VAL 0x2000
+#define WL_WSEC_VAL 0x4000
+#define WL_WSEC_DUMP_VAL 0x8000
+#define WL_LOG_VAL 0x10000
+#define WL_NRSSI_VAL 0x20000
+#define WL_LOFT_VAL 0x40000
+#define WL_REGULATORY_VAL 0x80000
+#define WL_ACI_VAL 0x100000
+
+
+/* 802.11h enforcement levels */
+#define SPECT_MNGMT_OFF 0 /* 11h disabled */
+#define SPECT_MNGMT_LOOSE 1 /* Allow scan lists to contain non-11h AP */
+ /* when 11h is enabled */
+#define SPECT_MNGMT_STRICT 2 /* Prine out non-11h APs from scan list */
+
+
+
+/* max # of leds supported by GPIO (gpio pin# == led index#) */
+#define WL_LED_NUMGPIO 16 /* gpio 0-15 */
+
+/* led per-pin behaviors */
+#define WL_LED_OFF 0 /* always off */
+#define WL_LED_ON 1 /* always on */
+#define WL_LED_ACTIVITY 2 /* activity */
+#define WL_LED_RADIO 3 /* radio enabled */
+#define WL_LED_ARADIO 4 /* 5 Ghz radio enabled */
+#define WL_LED_BRADIO 5 /* 2.4Ghz radio enabled */
+#define WL_LED_BGMODE 6 /* on if gmode, off if bmode */
+#define WL_LED_WI1 7
+#define WL_LED_WI2 8
+#define WL_LED_WI3 9
+#define WL_LED_ASSOC 10 /* associated state indicator */
+#define WL_LED_INACTIVE 11 /* null behavior (clears default behavior) */
+#define WL_LED_NUMBEHAVIOR 12
+
+/* led behavior numeric value format */
+#define WL_LED_BEH_MASK 0x7f /* behavior mask */
+#define WL_LED_AL_MASK 0x80 /* activelow (polarity) bit */
+
+
+/* maximum channels */
+#define WL_NUMCHANNELS 64 /* max # of channels in the band */
+
+/* rate check */
+#define WL_RATE_OFDM(r) (((r) & 0x7f) == 12 || ((r) & 0x7f) == 18 || \
+ ((r) & 0x7f) == 24 || ((r) & 0x7f) == 36 || \
+ ((r) & 0x7f) == 48 || ((r) & 0x7f) == 72 || \
+ ((r) & 0x7f) == 96 || ((r) & 0x7f) == 108)
+
+/* WDS link local endpoint WPA role */
+#define WL_WDS_WPA_ROLE_AUTH 0 /* authenticator */
+#define WL_WDS_WPA_ROLE_SUP 1 /* supplicant */
+#define WL_WDS_WPA_ROLE_AUTO 255 /* auto, based on mac addr value */
+
+/* afterburner_override */
+#define ABO_AUTO -1 /* auto - no override */
+#define ABO_OFF 0 /* force afterburner off */
+#define ABO_ON 1 /* force afterburner on */
+
+#define GMODE_AFTERBURNER 6
+
+#undef PACKED
+
+#endif /* _wlioctl_h_ */