diff options
Diffstat (limited to 'package/ppp/files/ppp.sh')
| -rwxr-xr-x[-rw-r--r--] | package/ppp/files/ppp.sh | 270 |
1 files changed, 154 insertions, 116 deletions
diff --git a/package/ppp/files/ppp.sh b/package/ppp/files/ppp.sh index e26749e..5f549bf 100644..100755 --- a/package/ppp/files/ppp.sh +++ b/package/ppp/files/ppp.sh @@ -1,145 +1,183 @@ -stop_interface_ppp() { - local cfg="$1" +#!/bin/sh - local proto - config_get proto "$cfg" proto +[ -x /usr/sbin/pppd ] || exit 0 - local link="$proto-$cfg" - SERVICE_PID_FILE="/var/run/ppp-${link}.pid" \ - service_stop /usr/sbin/pppd +[ -n "$INCLUDE_ONLY" ] || { + . /etc/functions.sh + . ../netifd-proto.sh + init_proto "$@" +} + +ppp_generic_init_config() { + proto_config_add_string "username" + proto_config_add_string "password" + proto_config_add_string "keepalive" + proto_config_add_int "demand" + proto_config_add_string "pppd_options" + proto_config_add_string "connect" + proto_config_add_string "disconnect" + proto_config_add_boolean "defaultroute" + proto_config_add_boolean "peerdns" + proto_config_add_boolean "ipv6" + proto_config_add_int "mtu" +} + +ppp_generic_setup() { + local config="$1"; shift + + json_get_var ipv6 ipv6 + [ "$ipv6" = 1 ] || ipv6="" + + json_get_var peerdns peerdns + [ "$peerdns" = 0 ] && peerdns="" || peerdns="1" + + json_get_var defaultroute defaultroute + if [ "$defaultroute" = 1 ]; then + defaultroute="defaultroute replacedefaultroute"; + else + defaultroute="nodefaultroute" + fi + + json_get_var demand demand + if [ "${demand:-0}" -gt 0 ]; then + demand="precompiled-active-filter /etc/ppp/filter demand idle $demand" + else + demand="persist" + fi + + [ -n "$mtu" ] || json_get_var mtu mtu - remove_dns "$cfg" + json_get_var keepalive keepalive + local interval="${keepalive##*[, ]}" + [ "$interval" != "$keepalive" ] || interval=5 + + json_get_var username username + json_get_var password password - local lock="/var/lock/ppp-$link" - [ -f "$lock" ] && lock -u "$lock" + [ -n "$connect" ] || json_get_var connect connect + [ -n "$disconnect" ] || json_get_var disconnect disconnect + json_get_var pppd_options pppd_options + + proto_run_command "$config" /usr/sbin/pppd \ + nodetach ipparam "$config" \ + ifname "${proto:-ppp}-$config" \ + ${keepalive:+lcp-echo-interval $interval lcp-echo-failure ${keepalive%%[, ]*}} \ + ${ipv6:++ipv6} $defaultroute \ + ${peerdns:+usepeerdns} \ + $demand maxfail 1 \ + ${username:+user "$username" password "$password"} \ + ${connect:+connect "$connect"} \ + ${disconnect:+disconnect "$disconnect"} \ + ip-up-script /lib/netifd/ppp-up \ + ipv6-up-script /lib/netifd/ppp-up \ + ip-down-script /lib/netifd/ppp-down \ + ipv6-down-script /lib/netifd/ppp-down \ + ${mtu:+mtu $mtu mru $mtu} \ + $pppd_options "$@" } -start_pppd() { - local cfg="$1"; shift +ppp_generic_teardown() { + local interface="$1" - # Workaround for PPPoE service and AC name options, - # filter out the nic-* argument and append it as last option - local nic="" - case "$1" in - nic-*) nic="$1"; shift ;; + case "$ERROR" in + 11|19) + proto_notify_error "$interface" AUTH_FAILED + proto_block_restart "$interface" + ;; esac + proto_kill_command "$interface" +} - local proto - config_get proto "$cfg" proto +# PPP on serial device - # unique link identifier - local link="${proto:-ppp}-$cfg" +proto_ppp_init_config() { + proto_config_add_string "device" + ppp_generic_init_config + no_device=1 + available=1 +} - # make sure only one pppd process is started - lock "/var/lock/ppp-${link}" - SERVICE_PID_FILE="/var/run/ppp-${link}.pid" \ - service_check /usr/sbin/pppd && { - lock -u "/var/lock/ppp-${link}" - return 0 - } +proto_ppp_setup() { + local config="$1" - # Workaround: sometimes hotplug2 doesn't deliver the hotplug event for creating - # /dev/ppp fast enough to be used here - [ -e /dev/ppp ] || mknod /dev/ppp c 108 0 + json_get_var device device + ppp_generic_setup "$config" "$device" +} - local device - config_get device "$cfg" device +proto_ppp_teardown() { + ppp_generic_teardown "$@" +} - local username - config_get username "$cfg" username +proto_pppoe_init_config() { + ppp_generic_init_config + proto_config_add_string "ac" + proto_config_add_string "service" +} - local password - config_get password "$cfg" password +proto_pppoe_setup() { + local config="$1" + local iface="$2" - local keepalive - config_get keepalive "$cfg" keepalive + for module in slhc ppp_generic pppox pppoe; do + /sbin/insmod $module 2>&- >&- + done - local connect - config_get connect "$cfg" connect + json_get_var mtu mtu + mtu="${mtu:-1492}" - local disconnect - config_get disconnect "$cfg" disconnect + json_get_var ac ac + json_get_var service service - local pppd_options - config_get pppd_options "$cfg" pppd_options + ppp_generic_setup "$config" \ + plugin rp-pppoe.so \ + ${ac:+rp_pppoe_ac "$ac"} \ + ${service:+rp_pppoe_service "$service"} \ + "nic-$iface" +} - local defaultroute - config_get_bool defaultroute "$cfg" defaultroute 1 - [ "$defaultroute" -eq 1 ] && \ - defaultroute="defaultroute replacedefaultroute" || defaultroute="nodefaultroute" +proto_pppoe_teardown() { + ppp_generic_teardown "$@" +} - local interval="${keepalive##*[, ]}" - [ "$interval" != "$keepalive" ] || interval=5 +proto_pppoa_init_config() { + ppp_generic_init_config + proto_config_add_int "atmdev" + proto_config_add_int "vci" + proto_config_add_int "vpi" + proto_config_add_string "encaps" +} - local dns - config_get dns "$config" dns - - local has_dns=0 - local peer_default=1 - [ -n "$dns" ] && { - has_dns=1 - peer_default=0 - } - - local peerdns - config_get_bool peerdns "$cfg" peerdns $peer_default - - [ "$peerdns" -eq 1 ] && { - peerdns="usepeerdns" - } || { - peerdns="" - add_dns "$cfg" $dns - } - - local demand - config_get demand "$cfg" demand 0 - - local demandargs - [ "$demand" -gt 0 ] && { - demandargs="precompiled-active-filter /etc/ppp/filter demand idle $demand" - [ "$has_dns" -eq 0 ] && add_dns "$cfg" 1.1.1.1 - } || { - demandargs="persist" - } - - local ipv6 - config_get_bool ipv6 "$cfg" ipv6 0 - [ "$ipv6" -eq 1 ] && ipv6="+ipv6" || ipv6="" - - SERVICE_DAEMONIZE=1 \ - SERVICE_WRITE_PID=1 \ - SERVICE_PID_FILE="/var/run/ppp-$link.pid" \ - service_start /usr/sbin/pppd "$@" \ - ${keepalive:+lcp-echo-interval $interval lcp-echo-failure ${keepalive%%[, ]*}} \ - $demandargs \ - $peerdns \ - $defaultroute \ - ${username:+user "$username" password "$password"} \ - ipparam "$cfg" \ - ifname "$link" \ - ${connect:+connect "$connect"} \ - ${disconnect:+disconnect "$disconnect"} \ - ${ipv6} \ - ${pppd_options} \ - nodetach \ - ${nic} +proto_pppoa_setup() { + local config="$1" + local iface="$2" - lock -u "/var/lock/ppp-${link}" -} + for module in slhc ppp_generic pppox pppoatm; do + /sbin/insmod $module 2>&- >&- + done -setup_interface_ppp() { - local iface="$1" - local config="$2" + json_get_var atmdev atmdev + json_get_var vci vci + json_get_var vpi vpi - local device - config_get device "$config" device + json_get_var encaps encaps + case "$encaps" in + 1|vc) encaps="vc-encaps" ;; + *) encaps="llc-encaps" ;; + esac + + ppp_generic_setup "$config" \ + plugin pppoatm.so \ + ${atmdev:+$atmdev.}${vpi:-8}.${vci:-35} \ + ${encaps} +} - local mtu - config_get mtu "$config" mtu +proto_pppoa_teardown() { + ppp_generic_teardown "$@" +} - mtu=${mtu:-1492} - start_pppd "$config" \ - mtu $mtu mru $mtu \ - "$device" +[ -n "$INCLUDE_ONLY" ] || { + add_protocol ppp + [ -f /usr/lib/pppd/*/rp-pppoe.so ] && add_protocol pppoe + [ -f /usr/lib/pppd/*/pppoatm.so ] && add_protocol pppoa } |