summaryrefslogtreecommitdiff
path: root/package/switch/src
diff options
context:
space:
mode:
Diffstat (limited to 'package/switch/src')
-rw-r--r--package/switch/src/Makefile19
-rw-r--r--package/switch/src/etc53xx.h620
-rw-r--r--package/switch/src/gpio.h52
-rw-r--r--package/switch/src/switch-adm.c579
-rw-r--r--package/switch/src/switch-core.c466
-rw-r--r--package/switch/src/switch-core.h59
-rw-r--r--package/switch/src/switch-robo.c484
7 files changed, 2279 insertions, 0 deletions
diff --git a/package/switch/src/Makefile b/package/switch/src/Makefile
new file mode 100644
index 0000000..4c5f911
--- /dev/null
+++ b/package/switch/src/Makefile
@@ -0,0 +1,19 @@
+# $Id$
+#
+# Makefile for switch driver
+#
+# Copyright (C) 2005 Felix Fietkau <nbd@openwrt.org>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version
+# 2 of the License, or (at your option) any later version.
+#
+
+obj-m := switch-core.o switch-adm.o switch-robo.o
+
+ifeq ($(MAKING_MODULES),1)
+export-objs := switch-core.o
+
+-include $(TOPDIR)/Rules.make
+endif
diff --git a/package/switch/src/etc53xx.h b/package/switch/src/etc53xx.h
new file mode 100644
index 0000000..12d94a5
--- /dev/null
+++ b/package/switch/src/etc53xx.h
@@ -0,0 +1,620 @@
+/*
+ * Broadcom Home Gateway Reference Design
+ * BCM53xx Register definitions
+ *
+ * Copyright 2004, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ * $Id: etc53xx.h,v 1.1 2005/05/14 13:15:46 nbd Exp $
+ */
+
+#ifndef __BCM535M_H_
+#define __BCM535M_H_
+
+/* ROBO embedded device type */
+#define ROBO_DEV_5380 1
+#define ROBO_DEV_5365 2
+#define ROBO_DEV_5350 3
+
+/* BCM5325m GLOBAL PAGE REGISTER MAP */
+#ifndef _CFE_
+#pragma pack(1)
+#endif
+
+/* BCM5325m Serial Management Port (SMP) Page offsets */
+#define ROBO_CTRL_PAGE 0x00 /* Control registers */
+#define ROBO_STAT_PAGE 0x01 /* Status register */
+#define ROBO_MGMT_PAGE 0x02 /* Management Mode registers */
+#define ROBO_MIB_AC_PAGE 0x03 /* MIB Autocast registers */
+#define ROBO_ARLCTRL_PAGE 0x04 /* ARL Control Registers */
+#define ROBO_ARLIO_PAGE 0x05 /* ARL Access Registers */
+#define ROBO_FRAMEBUF_PAGE 0x06 /* Management frame access registers */
+#define ROBO_MEM_ACCESS_PAGE 0x08 /* Memory access registers */
+
+/* PHY Registers */
+#define ROBO_PORT0_MII_PAGE 0x10 /* Port 0 MII Registers */
+#define ROBO_PORT1_MII_PAGE 0x11 /* Port 1 MII Registers */
+#define ROBO_PORT2_MII_PAGE 0x12 /* Port 2 MII Registers */
+#define ROBO_PORT3_MII_PAGE 0x13 /* Port 3 MII Registers */
+#define ROBO_PORT4_MII_PAGE 0x14 /* Port 4 MII Registers */
+/* (start) registers only for BCM5380 */
+#define ROBO_PORT5_MII_PAGE 0x15 /* Port 5 MII Registers */
+#define ROBO_PORT6_MII_PAGE 0x16 /* Port 6 MII Registers */
+#define ROBO_PORT7_MII_PAGE 0x17 /* Port 7 MII Registers */
+/* (end) registers only for BCM5380 */
+#define ROBO_IM_PORT_PAGE 0x18 /* Inverse MII Port (to EMAC) */
+#define ROBO_ALL_PORT_PAGE 0x19 /* All ports MII Registers (broadcast)*/
+
+/* MAC Statistics registers */
+#define ROBO_PORT0_MIB_PAGE 0x20 /* Port 0 10/100 MIB Statistics */
+#define ROBO_PORT1_MIB_PAGE 0x21 /* Port 1 10/100 MIB Statistics */
+#define ROBO_PORT2_MIB_PAGE 0x22 /* Port 2 10/100 MIB Statistics */
+#define ROBO_PORT3_MIB_PAGE 0x23 /* Port 3 10/100 MIB Statistics */
+#define ROBO_PORT4_MIB_PAGE 0x24 /* Port 4 10/100 MIB Statistics */
+/* (start) registers only for BCM5380 */
+#define ROBO_PORT5_MIB_PAGE 0x25 /* Port 5 10/100 MIB Statistics */
+#define ROBO_PORT6_MIB_PAGE 0x26 /* Port 6 10/100 MIB Statistics */
+#define ROBO_PORT7_MIB_PAGE 0x27 /* Port 7 10/100 MIB Statistics */
+/* (end) registers only for BCM5380 */
+#define ROBO_IM_PORT_MIB_PAGE 0x28 /* Inverse MII Port MIB Statistics */
+
+/* Quality of Service (QoS) Registers */
+#define ROBO_QOS_PAGE 0x30 /* QoS Registers */
+
+/* VLAN Registers */
+#define ROBO_VLAN_PAGE 0x34 /* VLAN Registers */
+
+/* Note SPI Data/IO Registers not used */
+#define ROBO_SPI_DATA_IO_0_PAGE 0xf0 /* SPI Data I/O 0 */
+#define ROBO_SPI_DATA_IO_1_PAGE 0xf1 /* SPI Data I/O 1 */
+#define ROBO_SPI_DATA_IO_2_PAGE 0xf2 /* SPI Data I/O 2 */
+#define ROBO_SPI_DATA_IO_3_PAGE 0xf3 /* SPI Data I/O 3 */
+#define ROBO_SPI_DATA_IO_4_PAGE 0xf4 /* SPI Data I/O 4 */
+#define ROBO_SPI_DATA_IO_5_PAGE 0xf5 /* SPI Data I/O 5 */
+#define ROBO_SPI_DATA_IO_6_PAGE 0xf6 /* SPI Data I/O 6 */
+#define ROBO_SPI_DATA_IO_7_PAGE 0xf7 /* SPI Data I/O 7 */
+
+#define ROBO_SPI_STATUS_PAGE 0xfe /* SPI Status Registers */
+#define ROBO_PAGE_PAGE 0xff /* Page Registers */
+
+
+/* BCM5325m CONTROL PAGE (0x00) REGISTER MAP : 8bit (byte) registers */
+typedef struct _ROBO_PORT_CTRL_STRUC
+{
+ unsigned char rx_disable:1; /* rx disable */
+ unsigned char tx_disable:1; /* tx disable */
+ unsigned char rsvd:3; /* reserved */
+ unsigned char stp_state:3; /* spanning tree state */
+} ROBO_PORT_CTRL_STRUC;
+
+#define ROBO_PORT0_CTRL 0x00 /* 10/100 Port 0 Control */
+#define ROBO_PORT1_CTRL 0x01 /* 10/100 Port 1 Control */
+#define ROBO_PORT2_CTRL 0x02 /* 10/100 Port 2 Control */
+#define ROBO_PORT3_CTRL 0x03 /* 10/100 Port 3 Control */
+#define ROBO_PORT4_CTRL 0x04 /* 10/100 Port 4 Control */
+/* (start) registers only for BCM5380 */
+#define ROBO_PORT5_CTRL 0x05 /* 10/100 Port 5 Control */
+#define ROBO_PORT6_CTRL 0x06 /* 10/100 Port 6 Control */
+#define ROBO_PORT7_CTRL 0x07 /* 10/100 Port 7 Control */
+/* (end) registers only for BCM5380 */
+#define ROBO_IM_PORT_CTRL 0x08 /* 10/100 Port 8 Control */
+#define ROBO_SMP_CTRL 0x0a /* SMP Control register */
+#define ROBO_SWITCH_MODE 0x0b /* Switch Mode Control */
+#define ROBO_PORT_OVERRIDE_CTRL 0x0e /* Port state override */
+#define ROBO_PORT_OVERRIDE_RVMII (1<<4) /* Bit 4 enables RvMII */
+#define ROBO_PD_MODE_CTRL 0x0f /* Power-down mode control */
+#define ROBO_IP_MULTICAST_CTRL 0x21 /* IP Multicast control */
+
+/* BCM5325m STATUS PAGE (0x01) REGISTER MAP : 16bit/48bit registers */
+#define ROBO_HALF_DUPLEX 0
+#define ROBO_FULL_DUPLEX 1
+
+#define ROBO_LINK_STAT_SUMMARY 0x00 /* Link Status Summary: 16bit */
+#define ROBO_LINK_STAT_CHANGE 0x02 /* Link Status Change: 16bit */
+#define ROBO_SPEED_STAT_SUMMARY 0x04 /* Port Speed Summary: 16bit*/
+#define ROBO_DUPLEX_STAT_SUMMARY 0x06 /* Duplex Status Summary: 16bit */
+#define ROBO_PAUSE_STAT_SUMMARY 0x08 /* PAUSE Status Summary: 16bit */
+#define ROBO_SOURCE_ADDR_CHANGE 0x0C /* Source Address Change: 16bit */
+#define ROBO_LSA_PORT0 0x10 /* Last Source Addr, Port 0: 48bits*/
+#define ROBO_LSA_PORT1 0x16 /* Last Source Addr, Port 1: 48bits*/
+#define ROBO_LSA_PORT2 0x1c /* Last Source Addr, Port 2: 48bits*/
+#define ROBO_LSA_PORT3 0x22 /* Last Source Addr, Port 3: 48bits*/
+#define ROBO_LSA_PORT4 0x28 /* Last Source Addr, Port 4: 48bits*/
+#define ROBO_LSA_IM_PORT 0x40 /* Last Source Addr, IM Port: 48bits*/
+
+/* BCM5325m MANAGEMENT MODE REGISTERS (0x02) REGISTER MAP: 8/48 bit regs*/
+typedef struct _ROBO_GLOBAL_CONFIG_STRUC
+{
+ unsigned char resetMIB:1; /* reset MIB counters */
+ unsigned char rxBPDU:1; /* receive BDPU enable */
+ unsigned char rsvd1:2; /* reserved */
+ unsigned char MIBacHdrCtrl:1; /* MIB autocast header control */
+ unsigned char MIBac:1; /* MIB autocast enable */
+ unsigned char frameMgmtPort:2; /* frame management port */
+} ROBO_GLOBAL_CONFIG_STRUC;
+#define ROBO_GLOBAL_CONFIG 0x00 /* Global Management Config: 8bit*/
+#define ROBO_MGMT_PORT_ID 0x02 /* Management Port ID: 8bit*/
+#define ROBO_RMON_MIB_STEER 0x04 /* RMON Mib Steering: 16bit */
+#define ROBO_MIB_MODE_SELECT 0x04 /* MIB Mode select: 16bit (BCM5350) */
+#define ROBO_AGE_TIMER_CTRL 0x06 /* Age time control: 32bit */
+#define ROBO_MIRROR_CAP_CTRL 0x10 /* Mirror Capture : 16bit */
+#define ROBO_MIRROR_ING_CTRL 0x12 /* Mirror Ingress Control: 16bit */
+#define ROBO_MIRROR_ING_DIV_CTRL 0x14 /* Mirror Ingress Divider: 16bit */
+#define ROBO_MIRROR_ING_MAC_ADDR 0x16 /* Ingress Mirror MAC Addr: 48bit*/
+#define ROBO_MIRROR_EGR_CTRL 0x1c /* Mirror Egress Control: 16bit */
+#define ROBO_MIRROR_EGR_DIV_CTRL 0x1e /* Mirror Egress Divider: 16bit */
+#define ROBO_MIRROR_EGR_MAC_ADDR 0x20 /* Egress Mirror MAC Addr: 48bit*/
+
+/* BCM5325m MIB AUTOCAST REGISTERS (0x03) REGISTER MAP: 8/16/48 bit regs */
+#define ROBO_MIB_AC_PORT 0x00 /* MIB Autocast Port: 16bit */
+#define ROBO_MIB_AC_HDR_PTR 0x02 /* MIB Autocast Header pointer:16bit*/
+#define ROBO_MIB_AC_HDR_LEN 0x04 /* MIB Autocast Header Len: 16bit */
+#define ROBO_MIB_AC_DA 0x06 /* MIB Autocast DA: 48bit */
+#define ROBO_MIB_AC_SA 0x0c /* MIB Autocast SA: 48bit */
+#define ROBO_MIB_AC_TYPE 0x12 /* MIB Autocast Type: 16bit */
+#define ROBO_MIB_AC_RATE 0x14 /* MIB Autocast Rate: 8bit */
+#define ROBO_GET_AC_RATE(secs) ((secs)*10)
+#define ROBO_AC_RATE_MAX 0xff
+#define ROBO_AC_RATE_DEFAULT 0x64 /* 10 secs */
+typedef struct _ROBO_MIB_AC_STRUCT
+{
+ unsigned char opcode:4; /* Tx MIB Autocast opcode */
+ unsigned char portno:4; /* zero-based port no. */
+ unsigned char portstate:8; /* port state */
+ unsigned long long TxOctets;
+ unsigned int TxDropPkts;
+ unsigned int rsvd;
+ unsigned int TxBroadcastPkts;
+ unsigned int TxMulticastPkts;
+ unsigned int TxUnicastPkts;
+ unsigned int TxCollisions;
+ unsigned int TxSingleCollision;
+ unsigned int TxMultiCollision;
+ unsigned int TxDeferredTransmit;
+ unsigned int TxLateCollision;
+ unsigned int TxExcessiveCollision;
+ unsigned int TxFrameInDiscards;
+ unsigned int TxPausePkts;
+ unsigned int rsvd1[2];
+ unsigned long long RxOctets;
+ unsigned int RxUndersizePkts;
+ unsigned int RxPausePkts;
+ unsigned int RxPkts64Octets;
+ unsigned int RxPkts64to127Octets;
+ unsigned int RxPkts128to255Octets;
+ unsigned int RxPkts256to511Octets;
+ unsigned int RxPkts512to1023Octets;
+ unsigned int RxPkts1024to1522Octets;
+ unsigned int RxOversizePkts;
+ unsigned int RxJabbers;
+ unsigned int RxAlignmentErrors;
+ unsigned int RxFCSErrors;
+ unsigned long long RxGoodOctets;
+ unsigned int RxDropPkts;
+ unsigned int RxUnicastPkts;
+ unsigned int RxMulticastPkts;
+ unsigned int RxBroadcastPkts;
+ unsigned int RxSAChanges;
+ unsigned int RxFragments;
+ unsigned int RxExcessSizeDisc;
+ unsigned int RxSymbolError;
+} ROBO_MIB_AC_STRUCT;
+
+/* BCM5325m ARL CONTROL REGISTERS (0x04) REGISTER MAP: 8/16/48/64 bit regs */
+#define ROBO_ARL_CONFIG 0x00 /* ARL Global Configuration: 8bit*/
+#define ROBO_BPDU_MC_ADDR_REG 0x04 /* BPDU Multicast Address Reg:64bit*/
+#define ROBO_MULTIPORT_ADDR_1 0x10 /* Multiport Address 1: 48 bits*/
+#define ROBO_MULTIPORT_VECTOR_1 0x16 /* Multiport Vector 1: 16 bits */
+#define ROBO_MULTIPORT_ADDR_2 0x20 /* Multiport Address 2: 48 bits*/
+#define ROBO_MULTIPORT_VECTOR_2 0x26 /* Multiport Vector 2: 16 bits */
+#define ROBO_SECURE_SRC_PORT_MASK 0x30 /* Secure Source Port Mask: 16 bits*/
+#define ROBO_SECURE_DST_PORT_MASK 0x32 /* Secure Dest Port Mask: 16 bits */
+
+
+/* BCM5325m ARL IO REGISTERS (0x05) REGISTER MAP: 8/16/48/64 bit regs */
+#define ARL_TABLE_WRITE 0 /* for read/write state in control reg */
+#define ARL_TABLE_READ 1 /* for read/write state in control reg */
+#ifdef BCM5380
+#define ARL_VID_BYTES 2 /* number of bytes for VID */
+#else
+#define ARL_VID_BYTES 1 /* number of bytes for VID */
+#endif
+typedef struct _ROBO_ARL_RW_CTRL_STRUC
+{
+ unsigned char ARLrw:1; /* ARL read/write (1=read) */
+ unsigned char rsvd:6; /* reserved */
+ unsigned char ARLStart:1; /* ARL start/done (1=start) */
+} ROBO_ARL_RW_CTRL_STRUC;
+typedef struct _ROBO_ARL_SEARCH_CTRL_STRUC
+{
+ unsigned char valid:1; /* ARL search result valid */
+ unsigned char rsvd:6; /* reserved */
+ unsigned char ARLStart:1; /* ARL start/done (1=start) */
+} ROBO_ARL_SEARCH_CTRL_STRUC;
+typedef struct _ROBO_ARL_ENTRY_CTRL_STRUC
+{
+ unsigned char portID:4; /* port id */
+ unsigned char chipID:2; /* chip id */
+ unsigned char rsvd:5; /* reserved */
+ unsigned char prio:2; /* priority */
+ unsigned char age:1; /* age */
+ unsigned char staticEn:1; /* static */
+ unsigned char valid:1; /* valid */
+} ROBO_ARL_ENTRY_CTRL_STRUC;
+typedef struct _ROBO_ARL_SEARCH_RESULT_CTRL_STRUC
+{
+ unsigned char portID:4; /* port id */
+ unsigned char rsvd:1; /* reserved */
+ unsigned char vid:8; /* vlan id */
+ unsigned char age:1; /* age */
+ unsigned char staticEn:1; /* static */
+ unsigned char valid:1; /* valid */
+} ROBO_ARL_SEARCH_RESULT_CTRL_STRUC;
+typedef struct _ROBO_ARL_ENTRY_MAC_STRUC
+{
+ unsigned char macBytes[6]; /* MAC address */
+} ROBO_ARL_ENTRY_MAC_STRUC;
+
+typedef struct _ROBO_ARL_ENTRY_STRUC
+{
+ ROBO_ARL_ENTRY_MAC_STRUC mac; /* MAC address */
+ ROBO_ARL_ENTRY_CTRL_STRUC ctrl; /* control bits */
+} ROBO_ARL_ENTRY_STRUC;
+
+typedef struct _ROBO_ARL_SEARCH_RESULT_STRUC
+{
+ ROBO_ARL_ENTRY_MAC_STRUC mac; /* MAC address */
+ ROBO_ARL_SEARCH_RESULT_CTRL_STRUC ctrl; /* control bits */
+} ROBO_ARL_SEARCH_RESULT_STRUC;
+
+/* multicast versions of ARL entry structs */
+typedef struct _ROBO_ARL_ENTRY_MCAST_CTRL_STRUC
+{
+ unsigned int portMask:12;/* multicast port mask */
+ unsigned char prio:1; /* priority */
+ unsigned char gigPort:1; /* gigabit port 1 mask */
+ unsigned char staticEn:1; /* static */
+ unsigned char valid:1; /* valid */
+} ROBO_ARL_ENTRY_MCAST_CTRL_STRUC;
+typedef struct _ROBO_ARL_SEARCH_RESULT_MCAST_CTRL_STRUC
+{
+ unsigned int portMask:13; /* multicast port mask */
+ unsigned char age:1; /* age */
+ unsigned char staticEn:1; /* static */
+ unsigned char valid:1; /* valid */
+} ROBO_ARL_SEARCH_RESULT_MCAST_CTRL_STRUC;
+/* BCM5350 extension register */
+typedef struct _ROBO_ARL_SEARCH_RESULT_EXTENSION
+{
+ unsigned int prio:2; /* priority */
+ unsigned int portMask:1; /* MSB (MII) of port mask for multicast */
+ unsigned int reserved:5;
+} ROBO_ARL_SEARCH_RESULT_EXTENSION;
+
+typedef struct _ROBO_ARL_ENTRY_MCAST_STRUC
+{
+ ROBO_ARL_ENTRY_MAC_STRUC mac; /* MAC address */
+ ROBO_ARL_ENTRY_MCAST_CTRL_STRUC ctrl; /* control bits */
+} ROBO_ARL_ENTRY_MCAST_STRUC;
+typedef struct _ROBO_ARL_SEARCH_RESULT_MCAST_STRUC
+{
+ ROBO_ARL_ENTRY_MAC_STRUC mac; /* MAC address */
+ ROBO_ARL_SEARCH_RESULT_MCAST_CTRL_STRUC ctrl; /* control bits */
+} ROBO_ARL_SEARCH_RESULT_MCAST_STRUC;
+
+#define ROBO_ARL_RW_CTRL 0x00 /* ARL Read/Write Control : 8bit */
+#define ROBO_ARL_MAC_ADDR_IDX 0x02 /* MAC Address Index: 48bit */
+#define ROBO_ARL_VID_TABLE_IDX 0x08 /* VID Table Address Index: 8bit */
+#define ROBO_ARL_ENTRY0 0x10 /* ARL Entry 0 : 64 bit */
+#define ROBO_ARL_ENTRY1 0x18 /* ARL Entry 1 : 64 bit */
+#define ROBO_ARL_SEARCH_CTRL 0x20 /* ARL Search Control: 8bit */
+#define ROBO_ARL_SEARCH_ADDR 0x22 /* ARL Search Address: 16bit */
+#define ROBO_ARL_SEARCH_RESULT 0x24 /* ARL Search Result: 64bit */
+#define ROBO_ARL_SEARCH_RESULT_EXT 0x2c /* ARL Search Result Extension (5350): 8bit */
+#define ROBO_ARL_VID_ENTRY0 0x30 /* ARL VID Entry 0: 64bit */
+#define ROBO_ARL_VID_ENTRY1 0x32 /* ARL VID Entry 1: 64bit */
+
+/* BCM5325m MANAGEMENT FRAME REGISTERS (0x6) REGISTER MAP: 8/16 bit regs */
+#define ROBO_MGMT_FRAME_RD_DATA 0x00 /* Management Frame Read Data :8bit*/
+#define ROBO_MGMT_FRAME_WR_DATA 0x01 /* Management Frame Write Data:8bit*/
+#define ROBO_MGMT_FRAME_WR_CTRL 0x02 /* Write Control: 16bit */
+#define ROBO_MGMT_FRAME_RD_STAT 0x04 /* Read Status: 16bit */
+
+/* BCM5325m MEMORY ACCESS REGISTERS (Page 0x08) REGISTER MAP: 32 bit regs */
+#define MEM_TABLE_READ 1 /* for read/write state in mem access reg */
+#define MEM_TABLE_WRITE 0 /* for read/write state in mem access reg */
+#define MEM_TABLE_ACCESS_START 1 /* for mem access read/write start */
+#define MEM_TABLE_ACCESS_DONE 0 /* for mem access read/write done */
+#define VLAN_TABLE_ADDR 0x3800 /* BCM5380 only */
+#ifdef BCM5380
+#define NUM_ARL_TABLE_ENTRIES 4096 /* number of entries in ARL table */
+#define NUM_VLAN_TABLE_ENTRIES 2048 /* number of entries in VLAN table */
+#define ARL_TABLE_ADDR 0 /* offset of ARL table start */
+#else
+#define NUM_ARL_TABLE_ENTRIES 2048 /* number of entries in ARL table */
+#define NUM_VLAN_TABLE_ENTRIES 256 /* number of entries in VLAN table */
+#define ARL_TABLE_ADDR 0x3800 /* offset of ARL table start */
+/* corresponding values for 5350 */
+#define NUM_ARL_TABLE_ENTRIES_5350 1024 /* number of entries in ARL table (5350) */
+#define NUM_VLAN_TABLE_ENTRIES_5350 16 /* number of entries in VLAN table */
+#define ARL_TABLE_ADDR_5350 0x1c00 /* offset of ARL table start (5350) */
+#endif
+typedef struct _ROBO_MEM_ACCESS_CTRL_STRUC
+{
+ unsigned int memAddr:14; /* 64-bit memory address */
+ unsigned char rsvd:4; /* reserved */
+ unsigned char readEn:1; /* read enable (0 == write) */
+ unsigned char startDone:1;/* memory access start/done */
+ unsigned int rsvd1:12; /* reserved */
+} ROBO_MEM_ACCESS_CTRL_STRUC;
+typedef struct _ROBO_MEM_ACCESS_DATA_STRUC
+{
+ unsigned int memData[2]; /* 64-bit data */
+ unsigned short rsvd; /* reserved */
+} ROBO_MEM_ACCESS_DATA_STRUC;
+
+#ifdef BCM5380
+typedef struct _ROBO_ARL_TABLE_DATA_STRUC
+{
+ unsigned char MACaddr[6]; /* MAC addr */
+ unsigned int portID:4; /* port ID */
+ unsigned int chipID:2; /* chip ID */
+ unsigned int rsvd:6; /* reserved */
+ unsigned int highPrio:1; /* high priority address */
+ unsigned int age:1; /* entry accessed/learned since ageing process */
+ unsigned int staticAddr:1;/* entry is static */
+ unsigned int valid:1; /* entry is valid */
+ unsigned int vid:12; /* vlan id */
+ unsigned int rsvd2:4; /* reserved */
+} ROBO_ARL_TABLE_DATA_STRUC;
+#else
+typedef struct _ROBO_ARL_TABLE_DATA_STRUC
+{
+ unsigned char MACaddr[6]; /* MAC addr */
+ unsigned int portID:4; /* port ID */
+ unsigned int chipID:2; /* chip ID */
+ unsigned int rsvd:7; /* reserved */
+ unsigned int age:1; /* entry accessed/learned since ageing process */
+ unsigned int staticAddr:1;/* entry is static */
+ unsigned int valid:1; /* entry is valid */
+} ROBO_ARL_TABLE_DATA_STRUC;
+#endif
+
+/* multicast format*/
+typedef struct _ROBO_ARL_TABLE_MCAST_DATA_STRUC
+{
+ unsigned char MACaddr[6]; /* MAC addr */
+ unsigned int portMask:12;/* multicast port mask */
+ unsigned char prio:1; /* priority */
+ unsigned char gigPort:1; /* gigabit port 1 mask */
+ unsigned char staticEn:1; /* static */
+ unsigned char valid:1; /* valid */
+ unsigned int vid:12; /* vlan id */
+ unsigned int rsvd2:4; /* reserved */
+} ROBO_ARL_TABLE_MCAST_DATA_STRUC;
+#define ROBO_MEM_ACCESS_CTRL 0x00 /* Memory Read/Write Control :32bit*/
+#define ROBO_MEM_ACCESS_DATA 0x04 /* Memory Read/Write Data:64bit*/
+
+/* BCM5325m SWITCH PORT (0x10-18) REGISTER MAP: 8/16 bit regs */
+typedef struct _ROBO_MII_CTRL_STRUC
+{
+ unsigned char rsvd:8; /* reserved */
+ unsigned char duplex:1; /* duplex mode */
+ unsigned char restartAN:1;/* restart auto-negotiation */
+ unsigned char rsvd1:1; /* reserved */
+ unsigned char powerDown:1;/* power down */
+ unsigned char ANenable:1; /* auto-negotiation enable */
+ unsigned char speed:1; /* forced speed selection */
+ unsigned char loopback:1; /* loopback */
+ unsigned char reset:1; /* reset */
+} ROBO_MII_CTRL_STRUC;
+typedef struct _ROBO_MII_AN_ADVERT_STRUC
+{
+ unsigned char selector:5; /* advertise selector field */
+ unsigned char T10BaseT:1; /* advertise 10BaseT */
+ unsigned char T10BaseTFull:1; /* advertise 10BaseT, full duplex */
+ unsigned char T100BaseX:1; /* advertise 100BaseX */
+ unsigned char T100BaseXFull:1;/* advertise 100BaseX full duplex */
+ unsigned char noT4:1; /* do not advertise T4 */
+ unsigned char pause:1; /* advertise pause for full duplex */
+ unsigned char rsvd:2; /* reserved */
+ unsigned char remoteFault:1; /* transmit remote fault */
+ unsigned char rsvd1:1; /* reserved */
+ unsigned char nextPage:1; /* nex page operation supported */
+} ROBO_MII_AN_ADVERT_STRUC;
+#define ROBO_MII_CTRL 0x00 /* Port MII Control */
+#define ROBO_MII_STAT 0x02 /* Port MII Status */
+/* Fields of link status register */
+#define ROBO_MII_STAT_JABBER (1<<1) /* Jabber detected */
+#define ROBO_MII_STAT_LINK (1<<2) /* Link status */
+
+#define ROBO_MII_PHYID_HI 0x04 /* Port PHY ID High */
+#define ROBO_MII_PHYID_LO 0x06 /* Port PHY ID Low */
+#define ROBO_MII_ANA_REG 0x08 /* MII Auto-Neg Advertisement */
+#define ROBO_MII_ANP_REG 0x0a /* MII Auto-Neg Partner Ability */
+#define ROBO_MII_AN_EXP_REG 0x0c /* MII Auto-Neg Expansion */
+#define ROBO_MII_AN_NP_REG 0x0e /* MII next page */
+#define ROBO_MII_ANP_NP_REG 0x10 /* MII Partner next page */
+#define ROBO_MII_100BX_AUX_CTRL 0x20 /* 100BASE-X Auxiliary Control */
+#define ROBO_MII_100BX_AUX_STAT 0x22 /* 100BASE-X Auxiliary Status */
+#define ROBO_MII_100BX_RCV_ERR_CTR 0x24 /* 100BASE-X Receive Error Ctr */
+#define ROBO_MII_100BX_RCV_FS_ERR 0x26 /* 100BASE-X Rcv False Sense Ctr */
+#define ROBO_MII_AUX_CTRL 0x30 /* Auxiliary Control/Status */
+/* Fields of Auxiliary control register */
+#define ROBO_MII_AUX_CTRL_FD (1<<0) /* Full duplex link detected*/
+#define ROBO_MII_AUX_CTRL_SP100 (1<<1) /* Speed 100 indication */
+#define ROBO_MII_AUX_STATUS 0x32 /* Aux Status Summary */
+#define ROBO_MII_CONN_STATUS 0x34 /* Aux Connection Status */
+#define ROBO_MII_AUX_MODE2 0x36 /* Aux Mode 2 */
+#define ROBO_MII_AUX_ERR_STATUS 0x38 /* Aux Error and General Status */
+#define ROBO_MII_AUX_MULTI_PHY 0x3c /* Aux Multiple PHY Register*/
+#define ROBO_MII_BROADCOM_TEST 0x3e /* Broadcom Test Register */
+
+
+/* BCM5325m PORT MIB REGISTERS (Pages 0x20-0x24,0x28) REGISTER MAP: 64/32 */
+/* Tranmit Statistics */
+#define ROBO_MIB_TX_OCTETS 0x00 /* 64b: TxOctets */
+#define ROBO_MIB_TX_DROP_PKTS 0x08 /* 32b: TxDropPkts */
+#define ROBO_MIB_TX_BC_PKTS 0x10 /* 32b: TxBroadcastPkts */
+#define ROBO_MIB_TX_MC_PKTS 0x14 /* 32b: TxMulticastPkts */
+#define ROBO_MIB_TX_UC_PKTS 0x18 /* 32b: TxUnicastPkts */
+#define ROBO_MIB_TX_COLLISIONS 0x1c /* 32b: TxCollisions */
+#define ROBO_MIB_TX_SINGLE_COLLISIONS 0x20 /* 32b: TxSingleCollision */
+#define ROBO_MIB_TX_MULTI_COLLISIONS 0x24 /* 32b: TxMultiCollision */
+#define ROBO_MIB_TX_DEFER_TX 0x28 /* 32b: TxDeferred Transmit */
+#define ROBO_MIB_TX_LATE_COLLISIONS 0x2c /* 32b: TxLateCollision */
+#define ROBO_MIB_EXCESS_COLLISIONS 0x30 /* 32b: TxExcessiveCollision*/
+#define ROBO_MIB_FRAME_IN_DISCARDS 0x34 /* 32b: TxFrameInDiscards */
+#define ROBO_MIB_TX_PAUSE_PKTS 0x38 /* 32b: TxPausePkts */
+
+/* Receive Statistics */
+#define ROBO_MIB_RX_OCTETS 0x44 /* 64b: RxOctets */
+#define ROBO_MIB_RX_UNDER_SIZE_PKTS 0x4c /* 32b: RxUndersizePkts(runts)*/
+#define ROBO_MIB_RX_PAUSE_PKTS 0x50 /* 32b: RxPausePkts */
+#define ROBO_MIB_RX_PKTS_64 0x54 /* 32b: RxPkts64Octets */
+#define ROBO_MIB_RX_PKTS_65_TO_127 0x58 /* 32b: RxPkts64to127Octets*/
+#define ROBO_MIB_RX_PKTS_128_TO_255 0x5c /* 32b: RxPkts128to255Octets*/
+#define ROBO_MIB_RX_PKTS_256_TO_511 0x60 /* 32b: RxPkts256to511Octets*/
+#define ROBO_MIB_RX_PKTS_512_TO_1023 0x64 /* 32b: RxPkts512to1023Octets*/
+#define ROBO_MIB_RX_PKTS_1024_TO_1522 0x68 /* 32b: RxPkts1024to1522Octets*/
+#define ROBO_MIB_RX_OVER_SIZE_PKTS 0x6c /* 32b: RxOversizePkts*/
+#define ROBO_MIB_RX_JABBERS 0x70 /* 32b: RxJabbers*/
+#define ROBO_MIB_RX_ALIGNMENT_ERRORS 0x74 /* 32b: RxAlignmentErrors*/
+#define ROBO_MIB_RX_FCS_ERRORS 0x78 /* 32b: RxFCSErrors */
+#define ROBO_MIB_RX_GOOD_OCTETS 0x7c /* 32b: RxGoodOctets */
+#define ROBO_MIB_RX_DROP_PKTS 0x84 /* 32b: RxDropPkts */
+#define ROBO_MIB_RX_UC_PKTS 0x88 /* 32b: RxUnicastPkts */
+#define ROBO_MIB_RX_MC_PKTS 0x8c /* 32b: RxMulticastPkts */
+#define ROBO_MIB_RX_BC_PKTS 0x90 /* 32b: RxBroadcastPkts */
+#define ROBO_MIB_RX_SA_CHANGES 0x94 /* 32b: RxSAChanges */
+#define ROBO_MIB_RX_FRAGMENTS 0x98 /* 32b: RxFragments */
+#define ROBO_MIB_RX_EXCESS_SZ_DISC 0x9c /* 32b: RxExcessSizeDisc*/
+#define ROBO_MIB_RX_SYMBOL_ERROR 0xa0 /* 32b: RxSymbolError */
+
+/* BCM5350 MIB Statistics */
+/* Group 0 */
+#define ROBO_MIB_TX_GOOD_PKTS 0x00 /* 16b: TxGoodPkts */
+#define ROBO_MIB_TX_UNICAST_PKTS 0x02 /* 16b: TxUnicastPkts */
+#define ROBO_MIB_RX_GOOD_PKTS 0x04 /* 16b: RxGoodPkts */
+#define ROBO_MIB_RX_GOOD_UNICAST_PKTS 0x06 /* 16b: RxGoodUnicastPkts */
+/* Group 1 */
+#define ROBO_MIB_TX_COLLISION 0x00 /* 16b: TxCollision */
+#define ROBO_MIB_TX_OCTETS_5350 0x02 /* 16b: TxOctets */
+#define ROBO_MIB_RX_FCS_ERRORS_5350 0x04 /* 16b: RxFCSErrors */
+#define ROBO_MIB_RX_GOOD_OCTETS_5350 0x06 /* 16b: RxGoodOctets */
+
+/* BCM5325m QoS REGISTERS (Page 0x30) REGISTER MAP: 8/16 */
+#define ROBO_QOS_CTRL 0x00 /* 16b: QoS Control Register */
+#define ROBO_QOS_LOCAL_WEIGHT_CTRL 0x10 /* 8b: Local HQ/LQ Weight Register*/
+#define ROBO_QOS_CPU_WEIGHT_CTRL 0x12 /* 8b: CPU HQ/LQ Weight Register*/
+#define ROBO_QOS_PAUSE_ENA 0x13 /* 16b: Qos Pause Enable Register*/
+#define ROBO_QOS_PRIO_THRESHOLD 0x15 /* 8b: Priority Threshold Register*/
+#define ROBO_QOS_RESERVED 0x16 /* 8b: Qos Reserved Register */
+
+/* BCM5325m VLAN REGISTERS (Page 0x34) REGISTER MAP: 8/16bit */
+typedef struct _ROBO_VLAN_CTRL0_STRUC
+{
+ unsigned char frameControlP:2; /* 802.1P frame control */
+ unsigned char frameControlQ:2; /* 802.1Q frame control */
+ unsigned char dropMissedVID:1; /* enable drop missed VID packet */
+ unsigned char vidMacHash:1; /* VID_MAC hash enable */
+ unsigned char vidMacCheck:1; /* VID_MAC check enable */
+ unsigned char VLANen:1; /* 802.1Q VLAN enable */
+} ROBO_VLAN_CTRL0_STRUC;
+#define VLAN_TABLE_WRITE 1 /* for read/write state in table access reg */
+#define VLAN_TABLE_READ 0 /* for read/write state in table access reg */
+#define VLAN_ID_HIGH_BITS 0 /* static high bits in table access reg */
+#define VLAN_ID_MAX 255 /* max VLAN id */
+#define VLAN_ID_MAX5350 15 /* max VLAN id (5350) */
+#define VLAN_ID_MASK VLAN_ID_MAX /* VLAN id mask */
+#ifdef BCM5380
+#define VLAN_UNTAG_SHIFT 13 /* for postioning untag bits in write reg */
+#define VLAN_VALID 0x4000000 /* valid bit in write reg */
+#else
+#define VLAN_UNTAG_SHIFT 7 /* for postioning untag bits in write reg */
+#define VLAN_VALID 0x4000 /* valid bit in write reg */
+/* corresponding values for 5350 */
+#define VLAN_UNTAG_SHIFT_5350 6 /* for postioning untag bits in write reg */
+#define VLAN_VALID_5350 0x00100000 /* valid bit in write reg */
+#endif
+typedef struct _ROBO_VLAN_TABLE_ACCESS_STRUC
+{
+ unsigned char VLANid:8; /* VLAN ID (low 8 bits) */
+ unsigned char VLANidHi:4; /* VLAN ID (fixed upper portion) */
+ unsigned char readWriteState:1; /* read/write state (write = 1) */
+ volatile unsigned char readWriteEnable:1; /* table read/write enable */
+ unsigned char rsvd:2; /* reserved */
+} ROBO_VLAN_TABLE_ACCESS_STRUC;
+#ifdef BCM5380
+typedef struct _ROBO_VLAN_READ_WRITE_STRUC
+{
+ unsigned int VLANgroup:13;/* VLAN group mask */
+ unsigned int VLANuntag:13;/* VLAN untag enable mask */
+ unsigned char valid:1; /* valid */
+ unsigned char rsvd:5; /* reserved */
+} ROBO_VLAN_READ_WRITE_STRUC;
+#else
+typedef struct _ROBO_VLAN_READ_WRITE_STRUC
+{
+ unsigned char VLANgroup:7; /* VLAN group mask */
+ unsigned char VLANuntag:7; /* VLAN untag enable mask */
+ unsigned char valid:1; /* valid */
+ unsigned char rsvd:1; /* reserved */
+} ROBO_VLAN_READ_WRITE_STRUC;
+typedef struct _ROBO_VLAN_READ_WRITE_STRUC_5350
+{
+ unsigned char VLANgroup:6; /* VLAN group mask */
+ unsigned char VLANuntag:6; /* VLAN untag enable mask */
+ unsigned char highVID:8; /* upper bits of vid */
+ unsigned char valid:1; /* valid */
+ unsigned int rsvd:11; /* reserved */
+} ROBO_VLAN_READ_WRITE_STRUC_5350;
+#endif
+#define ROBO_VLAN_CTRL0 0x00 /* 8b: VLAN Control 0 Register */
+#define ROBO_VLAN_CTRL1 0x01 /* 8b: VLAN Control 1 Register */
+#define ROBO_VLAN_CTRL2 0x02 /* 8b: VLAN Control 2 Register */
+#define ROBO_VLAN_CTRL3 0x03 /* 8b: VLAN Control 3 Register */
+#define ROBO_VLAN_CTRL4 0x04 /* 8b: VLAN Control 4 Register */
+#define ROBO_VLAN_CTRL5 0x05 /* 8b: VLAN Control 5 Register */
+#define ROBO_VLAN_TABLE_ACCESS 0x08 /* 14b: VLAN Table Access Register */
+#define ROBO_VLAN_TABLE_ACCESS_5350 0x06 /* 14b: VLAN Table Access Register (5350) */
+#define ROBO_VLAN_WRITE 0x0a /* 15b: VLAN Write Register */
+#define ROBO_VLAN_WRITE_5350 0x08 /* 15b: VLAN Write Register (5350) */
+#define ROBO_VLAN_READ 0x0c /* 15b: VLAN Read Register */
+#define ROBO_VLAN_PORT0_DEF_TAG 0x10 /* 16b: VLAN Port 0 Default Tag Register */
+#define ROBO_VLAN_PORT1_DEF_TAG 0x12 /* 16b: VLAN Port 1 Default Tag Register */
+#define ROBO_VLAN_PORT2_DEF_TAG 0x14 /* 16b: VLAN Port 2 Default Tag Register */
+#define ROBO_VLAN_PORT3_DEF_TAG 0x16 /* 16b: VLAN Port 3 Default Tag Register */
+#define ROBO_VLAN_PORT4_DEF_TAG 0x18 /* 16b: VLAN Port 4 Default Tag Register */
+#define ROBO_VLAN_PORTMII_DEF_TAG 0x1a /* 16b: VLAN Port MII Default Tag Register */
+/* 5380 only */
+#define ROBO_VLAN_PORT5_DEF_TAG 0x1a /* 16b: VLAN Port 5 Default Tag Register */
+#define ROBO_VLAN_PORT6_DEF_TAG 0x1c /* 16b: VLAN Port 6 Default Tag Register */
+#define ROBO_VLAN_PORT7_DEF_TAG 0x1e /* 16b: VLAN Port 7 Default Tag Register */
+
+/* obsolete */
+#define ROBO_VLAN_PORT0_CTRL 0x00 /* 16b: Port 0 VLAN Register */
+#define ROBO_VLAN_PORT1_CTRL 0x02 /* 16b: Port 1 VLAN Register */
+#define ROBO_VLAN_PORT2_CTRL 0x04 /* 16b: Port 2 VLAN Register */
+#define ROBO_VLAN_PORT3_CTRL 0x06 /* 16b: Port 3 VLAN Register */
+#define ROBO_VLAN_PORT4_CTRL 0x08 /* 16b: Port 4 VLAN Register */
+#define ROBO_VLAN_IM_PORT_CTRL 0x10 /* 16b: Inverse MII Port VLAN Reg */
+#define ROBO_VLAN_SMP_PORT_CTRL 0x12 /* 16b: Serial Port VLAN Register */
+#define ROBO_VLAN_PORTSPI_DEF_TAG 0x1c /* 16b: VLAN Port SPI Default Tag Register */
+#define ROBO_VLAN_PRIORITY_REMAP 0x20 /* 24b: VLAN Priority Re-Map Register */
+
+#ifndef _CFE_
+#pragma pack()
+#endif
+
+
+#endif /* !__BCM535M_H_ */
+
+
+
+
+
diff --git a/package/switch/src/gpio.h b/package/switch/src/gpio.h
new file mode 100644
index 0000000..800ae25
--- /dev/null
+++ b/package/switch/src/gpio.h
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2006 OpenWrt.org
+ *
+ * This is free software, licensed under the GNU General Public License v2.
+ * See /LICENSE for more information.
+ */
+
+#ifndef __GPIO_H
+#define __GPIO_H
+
+#if defined(BCMGPIO2)
+
+#ifdef LINUX_2_4
+#define sbh bcm947xx_sbh
+extern void *bcm947xx_sbh;
+#else
+extern void *sbh;
+#endif
+
+extern __u32 sb_gpioin(void *sbh);
+extern __u32 sb_gpiointpolarity(void *sbh, __u32 mask, __u32 val, __u8 prio);
+extern __u32 sb_gpiointmask(void *sbh, __u32 mask, __u32 val, __u8 prio);
+extern __u32 sb_gpioouten(void *sbh, __u32 mask, __u32 val, __u8 prio);
+extern __u32 sb_gpioout(void *sbh, __u32 mask, __u32 val, __u8 prio);
+
+#define gpioin() sb_gpioin(sbh)
+#define gpiointpolarity(mask,val) sb_gpiointpolarity(sbh, mask, val, 0)
+#define gpiointmask(mask,val) sb_gpiointmask(sbh, mask, val, 0)
+#define gpioouten(mask,val) sb_gpioouten(sbh, mask, val, 0)
+#define gpioout(mask,val) sb_gpioout(sbh, mask, val, 0)
+
+#elif defined(BCMGPIO)
+
+#define sbh bcm947xx_sbh
+extern void *bcm947xx_sbh;
+extern __u32 sb_gpioin(void *sbh);
+extern __u32 sb_gpiointpolarity(void *sbh, __u32 mask, __u32 val);
+extern __u32 sb_gpiointmask(void *sbh, __u32 mask, __u32 val);
+extern __u32 sb_gpioouten(void *sbh, __u32 mask, __u32 val);
+extern __u32 sb_gpioout(void *sbh, __u32 mask, __u32 val);
+
+#define gpioin() sb_gpioin(sbh)
+#define gpiointpolarity(mask,val) sb_gpiointpolarity(sbh, mask, val)
+#define gpiointmask(mask,val) sb_gpiointmask(sbh, mask, val)
+#define gpioouten(mask,val) sb_gpioouten(sbh, mask, val)
+#define gpioout(mask,val) sb_gpioout(sbh, mask, val)
+
+#else
+#error Unsupported/unknown GPIO configuration
+#endif
+
+#endif /* __GPIO_H */
diff --git a/package/switch/src/switch-adm.c b/package/switch/src/switch-adm.c
new file mode 100644
index 0000000..083b6eb
--- /dev/null
+++ b/package/switch/src/switch-adm.c
@@ -0,0 +1,579 @@
+/*
+ * ADMTEK Adm6996 switch configuration module
+ *
+ * Copyright (C) 2005 Felix Fietkau <nbd@nbd.name>
+ *
+ * Partially based on Broadcom Home Networking Division 10/100 Mbit/s
+ * Ethernet Device Driver (from Montavista 2.4.20_mvl31 Kernel).
+ * Copyright (C) 2004 Broadcom Corporation
+ *
+ * adm_rreg function from adm6996
+ * Copyright (C) 2004 Nikki Chumakov <nikki@gattaca.ru>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/if.h>
+#include <linux/if_arp.h>
+#include <linux/sockios.h>
+#include <linux/delay.h>
+#include <asm/uaccess.h>
+
+#include "switch-core.h"
+#include "gpio.h"
+
+#define DRIVER_NAME "adm6996"
+#define DRIVER_VERSION "0.01"
+
+static int eecs = 0;
+static int eesk = 0;
+static int eedi = 0;
+static int eerc = 0;
+static int force = 0;
+
+MODULE_AUTHOR("Felix Fietkau <openwrt@nbd.name>");
+MODULE_LICENSE("GPL");
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,52)
+module_param(eecs, int, 0);
+module_param(eesk, int, 0);
+module_param(eedi, int, 0);
+module_param(eerc, int, 0);
+module_param(force, int, 0);
+#else
+MODULE_PARM(eecs, "i");
+MODULE_PARM(eesk, "i");
+MODULE_PARM(eedi, "i");
+MODULE_PARM(eerc, "i");
+MODULE_PARM(force, "i");
+#endif
+
+/* Minimum timing constants */
+#define EECK_EDGE_TIME 3 /* 3us - max(adm 2.5us, 93c 1us) */
+#define EEDI_SETUP_TIME 1 /* 1us - max(adm 10ns, 93c 400ns) */
+#define EECS_SETUP_TIME 1 /* 1us - max(adm no, 93c 200ns) */
+
+/* Handy macros for writing fixed length values */
+#define adm_write8(cs, b) { __u8 val = (__u8) (b); adm_write(cs, &val, sizeof(val)*8); }
+#define adm_write16(cs, w) { __u16 val = hton16(w); adm_write(cs, (__u8 *)&val, sizeof(val)*8); }
+#define adm_write32(cs, i) { uint32 val = hton32(i); adm_write(cs, (__u8 *)&val, sizeof(val)*8); }
+
+#define atoi(str) simple_strtoul(((str != NULL) ? str : ""), NULL, 0)
+
+#if defined(BCMGPIO2) || defined(BCMGPIO)
+extern char *nvram_get(char *name);
+
+/* Return gpio pin number assigned to the named pin */
+/*
+* Variable should be in format:
+*
+* gpio<N>=pin_name
+*
+* 'def_pin' is returned if there is no such variable found.
+*/
+static unsigned int getgpiopin(char *pin_name, unsigned int def_pin)
+{
+ char name[] = "gpioXXXX";
+ char *val;
+ unsigned int pin;
+
+ /* Go thru all possibilities till a match in pin name */
+ for (pin = 0; pin < 16; pin ++) {
+ sprintf(name, "gpio%d", pin);
+ val = nvram_get(name);
+ if (val && !strcmp(val, pin_name))
+ return pin;
+ }
+ return def_pin;
+}
+#endif
+
+
+static void adm_write(int cs, char *buf, unsigned int bits)
+{
+ int i, len = (bits + 7) / 8;
+ __u8 mask;
+
+ gpioout(eecs, (cs ? eecs : 0));
+ udelay(EECK_EDGE_TIME);
+
+ /* Byte assemble from MSB to LSB */
+ for (i = 0; i < len; i++) {
+ /* Bit bang from MSB to LSB */
+ for (mask = 0x80; mask && bits > 0; mask >>= 1, bits --) {
+ /* Clock low */
+ gpioout(eesk, 0);
+ udelay(EECK_EDGE_TIME);
+
+ /* Output on rising edge */
+ gpioout(eedi, ((mask & buf[i]) ? eedi : 0));
+ udelay(EEDI_SETUP_TIME);
+
+ /* Clock high */
+ gpioout(eesk, eesk);
+ udelay(EECK_EDGE_TIME);
+ }
+ }
+
+ /* Clock low */
+ gpioout(eesk, 0);
+ udelay(EECK_EDGE_TIME);
+
+ if (cs)
+ gpioout(eecs, 0);
+}
+
+
+static void adm_read(int cs, char *buf, unsigned int bits)
+{
+ int i, len = (bits + 7) / 8;
+ __u8 mask;
+
+ gpioout(eecs, (cs ? eecs : 0));
+ udelay(EECK_EDGE_TIME);
+
+ /* Byte assemble from MSB to LSB */
+ for (i = 0; i < len; i++) {
+ __u8 byte;
+
+ /* Bit bang from MSB to LSB */
+ for (mask = 0x80, byte = 0; mask && bits > 0; mask >>= 1, bits --) {
+ __u8 gp;
+
+ /* Clock low */
+ gpioout(eesk, 0);
+ udelay(EECK_EDGE_TIME);
+
+ /* Input on rising edge */
+ gp = gpioin();
+ if (gp & eedi)
+ byte |= mask;
+
+ /* Clock high */
+ gpioout(eesk, eesk);
+ udelay(EECK_EDGE_TIME);
+ }
+
+ *buf++ = byte;
+ }
+
+ /* Clock low */
+ gpioout(eesk, 0);
+ udelay(EECK_EDGE_TIME);
+
+ if (cs)
+ gpioout(eecs, 0);
+}
+
+
+/* Enable outputs with specified value to the chip */
+static void adm_enout(__u8 pins, __u8 val)
+{
+ /* Prepare GPIO output value */
+ gpioout(pins, val);
+
+ /* Enable GPIO outputs */
+ gpioouten(pins, pins);
+ udelay(EECK_EDGE_TIME);
+}
+
+
+/* Disable outputs to the chip */
+static void adm_disout(__u8 pins)
+{
+ /* Disable GPIO outputs */
+ gpioouten(pins, 0);
+ udelay(EECK_EDGE_TIME);
+}
+
+
+/* Advance clock(s) */
+static void adm_adclk(int clocks)
+{
+ int i;
+ for (i = 0; i < clocks; i++) {
+ /* Clock high */
+ gpioout(eesk, eesk);
+ udelay(EECK_EDGE_TIME);
+
+ /* Clock low */
+ gpioout(eesk, 0);
+ udelay(EECK_EDGE_TIME);
+ }
+}
+
+static __u32 adm_rreg(__u8 table, __u8 addr)
+{
+ /* cmd: 01 10 T DD R RRRRRR */
+ __u8 bits[6] = {
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ (0x06 << 4) | ((table & 0x01) << 3 | (addr&64)>>6),
+ ((addr&62)<<2)
+ };
+
+ __u8 rbits[4];
+
+ /* Enable GPIO outputs with all pins to 0 */
+ adm_enout((__u8)(eecs | eesk | eedi), 0);
+
+ adm_write(0, bits, 46);
+ adm_disout((__u8)(eedi));
+ adm_adclk(2);
+ adm_read (0, rbits, 32);
+
+ /* Extra clock(s) required per datasheet */
+ adm_adclk(2);
+
+ /* Disable GPIO outputs */
+ adm_disout((__u8)(eecs | eesk));
+
+ if (!table) /* EEPROM has 16-bit registers, but pumps out two registers in one request */
+ return (addr & 0x01 ? (rbits[0]<<8) | rbits[1] : (rbits[2]<<8) | (rbits[3]));
+ else
+ return (rbits[0]<<24) | (rbits[1]<<16) | (rbits[2]<<8) | rbits[3];
+}
+
+
+
+/* Write chip configuration register */
+/* Follow 93c66 timing and chip's min EEPROM timing requirement */
+void
+adm_wreg(__u8 addr, __u16 val)
+{
+ /* cmd(27bits): sb(1) + opc(01) + addr(bbbbbbbb) + data(bbbbbbbbbbbbbbbb) */
+ __u8 bits[4] = {
+ (0x05 << 5) | (addr >> 3),
+ (addr << 5) | (__u8)(val >> 11),
+ (__u8)(val >> 3),
+ (__u8)(val << 5)
+ };
+
+ /* Enable GPIO outputs with all pins to 0 */
+ adm_enout((__u8)(eecs | eesk | eedi), 0);
+
+ /* Write cmd. Total 27 bits */
+ adm_write(1, bits, 27);
+
+ /* Extra clock(s) required per datasheet */
+ adm_adclk(2);
+
+ /* Disable GPIO outputs */
+ adm_disout((__u8)(eecs | eesk | eedi));
+}
+
+
+/* Port configuration registers */
+static int port_conf[] = { 0x01, 0x03, 0x05, 0x07, 0x08, 0x09 };
+
+/* Bits in VLAN port mapping */
+static int vlan_ports[] = { 1 << 0, 1 << 2, 1 << 4, 1 << 6, 1 << 7, 1 << 8 };
+
+static int handle_vlan_port_read(void *driver, char *buf, int nr)
+{
+ int ports, i, c, len = 0;
+
+ if ((nr < 0) || (nr > 15))
+ return 0;
+
+ /* Get VLAN port map */
+ ports = adm_rreg(0, 0x13 + nr);
+
+ for (i = 0; i <= 5; i++) {
+ if (ports & vlan_ports[i]) {
+ c = adm_rreg(0, port_conf[i]);
+
+ len += sprintf(buf + len, "%d", i);
+ if (c & (1 << 4)) {
+ buf[len++] = 't';
+ if (((c & (0xf << 10)) >> 10) == nr)
+ buf[len++] = '*';
+ } else if (i == 5)
+ buf[len++] = 'u';
+
+ buf[len++] = '\t';
+ }
+ }
+ len += sprintf(buf + len, "\n");
+
+ return len;
+}
+
+static int handle_vlan_port_write(void *driver, char *buf, int nr)
+{
+ int i, cfg, ports;
+ switch_driver *d = (switch_driver *) driver;
+ switch_vlan_config *c = switch_parse_vlan(d, buf);
+
+ if (c == NULL)
+ return -1;
+
+ ports = adm_rreg(0, 0x13 + nr);
+ for (i = 0; i < d->ports; i++) {
+ if (c->port & (1 << i)) {
+ ports |= vlan_ports[i];
+
+ cfg = adm_rreg(0, port_conf[i]);
+
+ /* Tagging */
+ if (c->untag & (1 << i))
+ cfg &= ~(1 << 4);
+ else
+ cfg |= (1 << 4);
+
+ if ((c->untag | c->pvid) & (1 << i)) {
+ cfg = (cfg & ~(0xf << 10)) | (nr << 10);
+ }
+
+ adm_wreg(port_conf[i], (__u16) cfg);
+ } else {
+ ports &= ~(vlan_ports[i]);
+ }
+ }
+ adm_wreg(0x13 + nr, (__u16) ports);
+
+ return 0;
+}
+
+static int handle_port_enable_read(void *driver, char *buf, int nr)
+{
+ return sprintf(buf, "%d\n", ((adm_rreg(0, port_conf[nr]) & (1 << 5)) ? 0 : 1));
+}
+
+static int handle_port_enable_write(void *driver, char *buf, int nr)
+{
+ int reg = adm_rreg(0, port_conf[nr]);
+
+ if (buf[0] == '0')
+ reg |= (1 << 5);
+ else if (buf[0] == '1')
+ reg &= ~(1 << 5);
+ else return -1;
+
+ adm_wreg(port_conf[nr], (__u16) reg);
+ return 0;
+}
+
+static int handle_port_media_read(void *driver, char *buf, int nr)
+{
+ int len;
+ int media = 0;
+ int reg = adm_rreg(0, port_conf[nr]);
+
+ if (reg & (1 << 1))
+ media |= SWITCH_MEDIA_AUTO;
+ if (reg & (1 << 2))
+ media |= SWITCH_MEDIA_100;
+ if (reg & (1 << 3))
+ media |= SWITCH_MEDIA_FD;
+
+ len = switch_print_media(buf, media);
+ return len + sprintf(buf + len, "\n");
+}
+
+static int handle_port_media_write(void *driver, char *buf, int nr)
+{
+ int media = switch_parse_media(buf);
+ int reg = adm_rreg(0, port_conf[nr]);
+
+ if (media < 0)
+ return -1;
+
+ reg &= ~((1 << 1) | (1 << 2) | (1 << 3));
+ if (media & SWITCH_MEDIA_AUTO)
+ reg |= 1 << 1;
+ if (media & SWITCH_MEDIA_100)
+ reg |= 1 << 2;
+ if (media & SWITCH_MEDIA_FD)
+ reg |= 1 << 3;
+
+ adm_wreg(port_conf[nr], reg);
+
+ return 0;
+}
+
+static int handle_vlan_enable_read(void *driver, char *buf, int nr)
+{
+ return sprintf(buf, "%d\n", ((adm_rreg(0, 0x11) & (1 << 5)) ? 1 : 0));
+}
+
+static int handle_vlan_enable_write(void *driver, char *buf, int nr)
+{
+ int reg = adm_rreg(0, 0x11);
+
+ if (buf[0] == '1')
+ reg |= (1 << 5);
+ else if (buf[0] == '0')
+ reg &= ~(1 << 5);
+ else return -1;
+
+ adm_wreg(0x11, (__u16) reg);
+ return 0;
+}
+
+static int handle_reset(void *driver, char *buf, int nr)
+{
+ int i;
+ u32 cfg;
+
+ /*
+ * Reset sequence: RC high->low(100ms)->high(30ms)
+ *
+ * WAR: Certain boards don't have the correct power on
+ * reset logic therefore we must explicitly perform the
+ * sequence in software.
+ */
+ if (eerc) {
+ /* Keep RC high for at least 20ms */
+ adm_enout(eerc, eerc);
+ for (i = 0; i < 20; i ++)
+ udelay(1000);
+ /* Keep RC low for at least 100ms */
+ adm_enout(eerc, 0);
+ for (i = 0; i < 100; i++)
+ udelay(1000);
+ /* Set default configuration */
+ adm_enout((__u8)(eesk | eedi), eesk);
+ /* Keep RC high for at least 30ms */
+ adm_enout(eerc, eerc);
+ for (i = 0; i < 30; i++)
+ udelay(1000);
+ /* Leave RC high and disable GPIO outputs */
+ adm_disout((__u8)(eecs | eesk | eedi));
+
+ }
+
+ /* set up initial configuration for cpu port */
+ cfg = (0x8000 | /* Auto MDIX */
+ (0xf << 10) | /* PVID */
+ (1 << 4) | /* Tagging */
+ 0xf); /* full duplex, 100Mbps, auto neg, flow ctrl */
+ adm_wreg(port_conf[5], cfg);
+
+ /* vlan mode select register (0x11): vlan on, mac clone */
+ adm_wreg(0x11, 0xff30);
+
+ return 0;
+}
+
+static int handle_registers(void *driver, char *buf, int nr)
+{
+ int i, len = 0;
+
+ for (i = 0; i <= 0x33; i++) {
+ len += sprintf(buf + len, "0x%02x: 0x%04x\n", i, adm_rreg(0, i));
+ }
+
+ return len;
+}
+
+static int handle_counters(void *driver, char *buf, int nr)
+{
+ int i, len = 0;
+
+ for (i = 0; i <= 0x3c; i++) {
+ len += sprintf(buf + len, "0x%02x: 0x%08x\n", i, adm_rreg(1, i));
+ }
+
+ return len;
+}
+
+static int detect_adm(void)
+{
+ int ret = 0;
+
+#if defined(BCMGPIO2) || defined(BCMGPIO)
+ int boardflags = atoi(nvram_get("boardflags"));
+
+ if ((boardflags & 0x80) || force) {
+ ret = 1;
+
+ eecs = getgpiopin("adm_eecs", 2);
+ eesk = getgpiopin("adm_eesk", 3);
+ eedi = getgpiopin("adm_eedi", 4);
+ eerc = getgpiopin("adm_rc", 0);
+
+ } else if ((strcmp(nvram_get("boardtype") ?: "", "bcm94710dev") == 0) &&
+ (strncmp(nvram_get("boardnum") ?: "", "42", 2) == 0)) {
+ /* WRT54G v1.1 hack */
+ eecs = 2;
+ eesk = 3;
+ eedi = 5;
+
+ ret = 1;
+ } else
+ printk("BFL_ENETADM not set in boardflags. Use force=1 to ignore.\n");
+
+ if (eecs)
+ eecs = (1 << eecs);
+ if (eesk)
+ eesk = (1 << eesk);
+ if (eedi)
+ eedi = (1 << eedi);
+ if (eerc)
+ eerc = (1 << eerc);
+#else
+ ret = 1;
+#endif
+
+ return ret;
+}
+
+static int __init adm_init(void)
+{
+ switch_config cfg[] = {
+ {"registers", handle_registers, NULL},
+ {"counters", handle_counters, NULL},
+ {"reset", NULL, handle_reset},
+ {"enable_vlan", handle_vlan_enable_read, handle_vlan_enable_write},
+ {NULL, NULL, NULL}
+ };
+ switch_config port[] = {
+ {"enable", handle_port_enable_read, handle_port_enable_write},
+ {"media", handle_port_media_read, handle_port_media_write},
+ {NULL, NULL, NULL}
+ };
+ switch_config vlan[] = {
+ {"ports", handle_vlan_port_read, handle_vlan_port_write},
+ {NULL, NULL, NULL}
+ };
+ switch_driver driver = {
+ name: DRIVER_NAME,
+ version: DRIVER_VERSION,
+ interface: "eth0",
+ ports: 6,
+ cpuport: 5,
+ vlans: 16,
+ driver_handlers: cfg,
+ port_handlers: port,
+ vlan_handlers: vlan,
+ };
+
+ if (!detect_adm())
+ return -ENODEV;
+
+ return switch_register_driver(&driver);
+}
+
+static void __exit adm_exit(void)
+{
+ switch_unregister_driver(DRIVER_NAME);
+}
+
+
+module_init(adm_init);
+module_exit(adm_exit);
diff --git a/package/switch/src/switch-core.c b/package/switch/src/switch-core.c
new file mode 100644
index 0000000..7bf705a
--- /dev/null
+++ b/package/switch/src/switch-core.c
@@ -0,0 +1,466 @@
+/*
+ * switch-core.c
+ *
+ * Copyright (C) 2005 Felix Fietkau <openwrt@nbd.name>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * $Id: $
+ *
+ * Basic doc of driver's /proc interface:
+ * /proc/switch/<interface>/
+ * registers: read-only
+ * counters: read-only
+ * reset: write causes hardware reset
+ * enable_vlan: "0", "1"
+ * port/<port-number>/
+ * enabled: "0", "1"
+ * media: "AUTO", "100FD", "100HD", "10FD", "10HD"
+ * vlan/<port-number>/
+ * ports: same syntax as for nvram's vlan*ports (eg. "1 2 3 4 5*")
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <asm/uaccess.h>
+#include <linux/proc_fs.h>
+#include <linux/list.h>
+
+#include "switch-core.h"
+
+static int drv_num = 0;
+static struct proc_dir_entry *switch_root;
+switch_driver drivers;
+
+typedef struct {
+ struct list_head list;
+ struct proc_dir_entry *parent;
+ int nr;
+ void *driver;
+ switch_config handler;
+} switch_proc_handler;
+
+typedef struct {
+ struct proc_dir_entry *driver_dir, *port_dir, *vlan_dir;
+ struct proc_dir_entry **ports, **vlans;
+ switch_proc_handler data;
+ int nr;
+} switch_priv;
+
+static ssize_t switch_proc_read(struct file *file, char *buf, size_t count, loff_t *ppos);
+static ssize_t switch_proc_write(struct file *file, const char *buf, size_t count, void *data);
+
+static struct file_operations switch_proc_fops = {
+ .read = (ssize_t (*) (struct file *, char __user *, size_t, loff_t *))switch_proc_read,
+ .write = (ssize_t (*) (struct file *, const char __user *, size_t, loff_t *))switch_proc_write
+};
+
+static ssize_t switch_proc_read(struct file *file, char *buf, size_t count, loff_t *ppos)
+{
+#ifdef LINUX_2_4
+ struct inode *inode = file->f_dentry->d_inode;
+ struct proc_dir_entry *dent = inode->u.generic_ip;
+#else
+ struct proc_dir_entry *dent = PDE(file->f_dentry->d_inode);
+#endif
+ char *page;
+ int len = 0;
+
+ if ((page = kmalloc(SWITCH_MAX_BUFSZ, GFP_KERNEL)) == NULL)
+ return -ENOBUFS;
+
+ if (dent->data != NULL) {
+ switch_proc_handler *handler = (switch_proc_handler *) dent->data;
+ if (handler->handler.read != NULL)
+ len += handler->handler.read(handler->driver, page + len, handler->nr);
+ }
+ len += 1;
+
+ if (*ppos < len) {
+ len = min_t(int, len - *ppos, count);
+ if (copy_to_user(buf, (page + *ppos), len)) {
+ kfree(page);
+ return -EFAULT;
+ }
+ *ppos += len;
+ } else {
+ len = 0;
+ }
+
+ return len;
+}
+
+
+static ssize_t switch_proc_write(struct file *file, const char *buf, size_t count, void *data)
+{
+#ifdef LINUX_2_4
+ struct inode *inode = file->f_dentry->d_inode;
+ struct proc_dir_entry *dent = inode->u.generic_ip;
+#else
+ struct proc_dir_entry *dent = PDE(file->f_dentry->d_inode);
+#endif
+ char *page;
+ int ret = -EINVAL;
+
+ if ((page = kmalloc(count + 1, GFP_KERNEL)) == NULL)
+ return -ENOBUFS;
+
+ if (copy_from_user(page, buf, count)) {
+ kfree(page);
+ return -EINVAL;
+ }
+ page[count] = 0;
+
+ if (dent->data != NULL) {
+ switch_proc_handler *handler = (switch_proc_handler *) dent->data;
+ if (handler->handler.write != NULL) {
+ if ((ret = handler->handler.write(handler->driver, page, handler->nr)) >= 0)
+ ret = count;
+ }
+ }
+
+ kfree(page);
+ return ret;
+}
+
+static int handle_driver_name(void *driver, char *buf, int nr)
+{
+ char *name = ((switch_driver *) driver)->name;
+ return sprintf(buf, "%s\n", name);
+}
+
+static int handle_driver_version(void *driver, char *buf, int nr)
+{
+ char *version = ((switch_driver *) driver)->version;
+ strcpy(buf, version);
+ return sprintf(buf, "%s\n", version);
+}
+
+static void add_handler(switch_driver *driver, switch_config *handler, struct proc_dir_entry *parent, int nr)
+{
+ switch_priv *priv = (switch_priv *) driver->data;
+ struct proc_dir_entry *p;
+ int mode;
+
+ switch_proc_handler *tmp;
+ tmp = (switch_proc_handler *) kmalloc(sizeof(switch_proc_handler), GFP_KERNEL);
+ INIT_LIST_HEAD(&tmp->list);
+ tmp->parent = parent;
+ tmp->nr = nr;
+ tmp->driver = driver;
+ memcpy(&tmp->handler, handler, sizeof(switch_config));
+ list_add(&tmp->list, &priv->data.list);
+
+ mode = 0;
+ if (handler->read != NULL) mode |= S_IRUSR;
+ if (handler->write != NULL) mode |= S_IWUSR;
+
+ if ((p = create_proc_entry(handler->name, mode, parent)) != NULL) {
+ p->data = (void *) tmp;
+ p->proc_fops = &switch_proc_fops;
+ }
+}
+
+static inline void add_handlers(switch_driver *driver, switch_config *handlers, struct proc_dir_entry *parent, int nr)
+{
+ int i;
+
+ for (i = 0; handlers[i].name != NULL; i++) {
+ add_handler(driver, &(handlers[i]), parent, nr);
+ }
+}
+
+static void remove_handlers(switch_priv *priv)
+{
+ struct list_head *pos, *q;
+ switch_proc_handler *tmp;
+
+ list_for_each_safe(pos, q, &priv->data.list) {
+ tmp = list_entry(pos, switch_proc_handler, list);
+ list_del(pos);
+ remove_proc_entry(tmp->handler.name, tmp->parent);
+ kfree(tmp);
+ }
+}
+
+
+static void do_unregister(switch_driver *driver)
+{
+ char buf[4];
+ int i;
+ switch_priv *priv = (switch_priv *) driver->data;
+
+ remove_handlers(priv);
+
+ for(i = 0; priv->ports[i] != NULL; i++) {
+ sprintf(buf, "%d", i);
+ remove_proc_entry(buf, priv->port_dir);
+ }
+ kfree(priv->ports);
+ remove_proc_entry("port", priv->driver_dir);
+
+ for(i = 0; priv->vlans[i] != NULL; i++) {
+ sprintf(buf, "%d", i);
+ remove_proc_entry(buf, priv->vlan_dir);
+ }
+ kfree(priv->vlans);
+ remove_proc_entry("vlan", priv->driver_dir);
+
+ remove_proc_entry(driver->interface, switch_root);
+
+ if (priv->nr == (drv_num - 1))
+ drv_num--;
+
+ kfree(priv);
+}
+
+switch_config global_driver_handlers[] = {
+ {"driver", handle_driver_name, NULL},
+ {"version", handle_driver_version, NULL},
+ {NULL, NULL, NULL}
+};
+
+static int do_register(switch_driver *driver)
+{
+ switch_priv *priv;
+ int i;
+ char buf[4];
+
+ if ((priv = kmalloc(sizeof(switch_priv), GFP_KERNEL)) == NULL)
+ return -ENOBUFS;
+ driver->data = (void *) priv;
+
+ INIT_LIST_HEAD(&priv->data.list);
+
+ priv->nr = drv_num++;
+ priv->driver_dir = proc_mkdir(driver->interface, switch_root);
+ if (driver->driver_handlers != NULL) {
+ add_handlers(driver, driver->driver_handlers, priv->driver_dir, 0);
+ add_handlers(driver, global_driver_handlers, priv->driver_dir, 0);
+ }
+
+ priv->port_dir = proc_mkdir("port", priv->driver_dir);
+ priv->ports = kmalloc((driver->ports + 1) * sizeof(struct proc_dir_entry *), GFP_KERNEL);
+ for (i = 0; i < driver->ports; i++) {
+ sprintf(buf, "%d", i);
+ priv->ports[i] = proc_mkdir(buf, priv->port_dir);
+ if (driver->port_handlers != NULL)
+ add_handlers(driver, driver->port_handlers, priv->ports[i], i);
+ }
+ priv->ports[i] = NULL;
+
+ priv->vlan_dir = proc_mkdir("vlan", priv->driver_dir);
+ priv->vlans = kmalloc((driver->vlans + 1) * sizeof(struct proc_dir_entry *), GFP_KERNEL);
+ for (i = 0; i < driver->vlans; i++) {
+ sprintf(buf, "%d", i);
+ priv->vlans[i] = proc_mkdir(buf, priv->vlan_dir);
+ if (driver->vlan_handlers != NULL)
+ add_handlers(driver, driver->vlan_handlers, priv->vlans[i], i);
+ }
+ priv->vlans[i] = NULL;
+
+
+ return 0;
+}
+
+static inline int isspace(char c) {
+ switch(c) {
+ case ' ':
+ case 0x09:
+ case 0x0a:
+ case 0x0d:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+#define toupper(c) (islower(c) ? ((c) ^ 0x20) : (c))
+#define islower(c) (((unsigned char)((c) - 'a')) < 26)
+
+int switch_parse_media(char *buf)
+{
+ char *str = buf;
+ while (*buf != 0) {
+ *buf = toupper(*buf);
+ buf++;
+ }
+
+ if (strncmp(str, "AUTO", 4) == 0)
+ return SWITCH_MEDIA_AUTO;
+ else if (strncmp(str, "100FD", 5) == 0)
+ return SWITCH_MEDIA_100 | SWITCH_MEDIA_FD;
+ else if (strncmp(str, "100HD", 5) == 0)
+ return SWITCH_MEDIA_100;
+ else if (strncmp(str, "10FD", 4) == 0)
+ return SWITCH_MEDIA_FD;
+ else if (strncmp(str, "10HD", 4) == 0)
+ return 0;
+ else return -1;
+}
+
+int switch_print_media(char *buf, int media)
+{
+ int len = 0;
+
+ if (media & SWITCH_MEDIA_AUTO)
+ len = sprintf(buf, "Auto");
+ else if (media == (SWITCH_MEDIA_100 | SWITCH_MEDIA_FD))
+ len = sprintf(buf, "100FD");
+ else if (media == SWITCH_MEDIA_100)
+ len = sprintf(buf, "100HD");
+ else if (media == SWITCH_MEDIA_FD)
+ len = sprintf(buf, "10FD");
+ else if (media == 0)
+ len = sprintf(buf, "10HD");
+ else
+ len = sprintf(buf, "Invalid");
+
+ return len;
+}
+
+switch_vlan_config *switch_parse_vlan(switch_driver *driver, char *buf)
+{
+ switch_vlan_config *c;
+ int j, u, p, s;
+
+ c = kmalloc(sizeof(switch_vlan_config), GFP_KERNEL);
+ memset(c, 0, sizeof(switch_vlan_config));
+
+ while (isspace(*buf)) buf++;
+ j = 0;
+ while (*buf >= '0' && *buf <= '9') {
+ j *= 10;
+ j += *buf++ - '0';
+
+ u = ((j == driver->cpuport) ? 0 : 1);
+ p = 0;
+ s = !(*buf >= '0' && *buf <= '9');
+
+ if (s) {
+ while (s && !isspace(*buf) && (*buf != 0)) {
+ switch(*buf) {
+ case 'u':
+ u = 1;
+ break;
+ case 't':
+ u = 0;
+ break;
+ case '*':
+ p = 1;
+ break;
+ }
+ buf++;
+ }
+ c->port |= (1 << j);
+ if (u)
+ c->untag |= (1 << j);
+ if (p)
+ c->pvid |= (1 << j);
+
+ j = 0;
+ }
+
+ while (isspace(*buf)) buf++;
+ }
+ if (*buf != 0) return NULL;
+
+ c->port &= (1 << driver->ports) - 1;
+ c->untag &= (1 << driver->ports) - 1;
+ c->pvid &= (1 << driver->ports) - 1;
+
+ return c;
+}
+
+
+int switch_register_driver(switch_driver *driver)
+{
+ struct list_head *pos;
+ switch_driver *new;
+ int ret;
+
+ list_for_each(pos, &drivers.list) {
+ if (strcmp(list_entry(pos, switch_driver, list)->name, driver->name) == 0) {
+ printk("Switch driver '%s' already exists in the kernel\n", driver->name);
+ return -EINVAL;
+ }
+ if (strcmp(list_entry(pos, switch_driver, list)->interface, driver->interface) == 0) {
+ printk("There is already a switch registered on the device '%s'\n", driver->interface);
+ return -EINVAL;
+ }
+ }
+
+ new = kmalloc(sizeof(switch_driver), GFP_KERNEL);
+ memcpy(new, driver, sizeof(switch_driver));
+ new->name = strdup(driver->name);
+ new->interface = strdup(driver->interface);
+
+ if ((ret = do_register(new)) < 0) {
+ kfree(new->name);
+ kfree(new);
+ return ret;
+ }
+ INIT_LIST_HEAD(&new->list);
+ list_add(&new->list, &drivers.list);
+
+ return 0;
+}
+
+void switch_unregister_driver(char *name) {
+ struct list_head *pos, *q;
+ switch_driver *tmp;
+
+ list_for_each_safe(pos, q, &drivers.list) {
+ tmp = list_entry(pos, switch_driver, list);
+ if (strcmp(tmp->name, name) == 0) {
+ do_unregister(tmp);
+ list_del(pos);
+ kfree(tmp->name);
+ kfree(tmp);
+
+ return;
+ }
+ }
+}
+
+static int __init switch_init(void)
+{
+ if ((switch_root = proc_mkdir("switch", NULL)) == NULL) {
+ printk("%s: proc_mkdir failed.\n", __FILE__);
+ return -ENODEV;
+ }
+
+ INIT_LIST_HEAD(&drivers.list);
+
+ return 0;
+}
+
+static void __exit switch_exit(void)
+{
+ remove_proc_entry("switch", NULL);
+}
+
+MODULE_AUTHOR("Felix Fietkau <openwrt@nbd.name>");
+MODULE_LICENSE("GPL");
+
+EXPORT_SYMBOL(switch_register_driver);
+EXPORT_SYMBOL(switch_unregister_driver);
+EXPORT_SYMBOL(switch_parse_vlan);
+EXPORT_SYMBOL(switch_parse_media);
+EXPORT_SYMBOL(switch_print_media);
+
+module_init(switch_init);
+module_exit(switch_exit);
diff --git a/package/switch/src/switch-core.h b/package/switch/src/switch-core.h
new file mode 100644
index 0000000..5292469
--- /dev/null
+++ b/package/switch/src/switch-core.h
@@ -0,0 +1,59 @@
+#ifndef __SWITCH_CORE_H
+#define __SWITCH_CORE_H
+
+#include <linux/version.h>
+#include <linux/list.h>
+#define SWITCH_MAX_BUFSZ 4096
+
+#define SWITCH_MEDIA_AUTO 1
+#define SWITCH_MEDIA_100 2
+#define SWITCH_MEDIA_FD 4
+
+#ifndef KERNEL_VERSION
+#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+#define LINUX_2_4
+#endif
+
+typedef int (*switch_handler)(void *driver, char *buf, int nr);
+
+typedef struct {
+ char *name;
+ switch_handler read, write;
+} switch_config;
+
+typedef struct {
+ struct list_head list;
+ char *name;
+ char *version;
+ char *interface;
+ int cpuport;
+ int ports;
+ int vlans;
+ switch_config *driver_handlers, *port_handlers, *vlan_handlers;
+ void *data;
+ void *priv;
+} switch_driver;
+
+typedef struct {
+ u32 port, untag, pvid;
+} switch_vlan_config;
+
+
+extern int switch_register_driver(switch_driver *driver);
+extern void switch_unregister_driver(char *name);
+extern switch_vlan_config *switch_parse_vlan(switch_driver *driver, char *buf);
+extern int switch_parse_media(char *buf);
+extern int switch_print_media(char *buf, int media);
+
+static inline char *strdup(char *str)
+{
+ char *new = kmalloc(strlen(str) + 1, GFP_KERNEL);
+ strcpy(new, str);
+ return new;
+}
+
+
+#endif
diff --git a/package/switch/src/switch-robo.c b/package/switch/src/switch-robo.c
new file mode 100644
index 0000000..32cf2b3
--- /dev/null
+++ b/package/switch/src/switch-robo.c
@@ -0,0 +1,484 @@
+/*
+ * Broadcom BCM5325E/536x switch configuration module
+ *
+ * Copyright (C) 2005 Felix Fietkau <nbd@nbd.name>
+ * Based on 'robocfg' by Oleg I. Vdovikin
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/if.h>
+#include <linux/if_arp.h>
+#include <linux/sockios.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <asm/uaccess.h>
+
+#include "switch-core.h"
+#include "etc53xx.h"
+
+#define DRIVER_NAME "bcm53xx"
+#define DRIVER_VERSION "0.01"
+
+#define ROBO_PHY_ADDR 0x1E /* robo switch phy address */
+
+/* MII registers */
+#define REG_MII_PAGE 0x10 /* MII Page register */
+#define REG_MII_ADDR 0x11 /* MII Address register */
+#define REG_MII_DATA0 0x18 /* MII Data register 0 */
+
+#define REG_MII_PAGE_ENABLE 1
+#define REG_MII_ADDR_WRITE 1
+#define REG_MII_ADDR_READ 2
+
+/* Private et.o ioctls */
+#define SIOCGETCPHYRD (SIOCDEVPRIVATE + 9)
+#define SIOCSETCPHYWR (SIOCDEVPRIVATE + 10)
+
+static char *device;
+static int use_et = 0;
+static int is_5350 = 0;
+static struct ifreq ifr;
+static struct net_device *dev;
+static unsigned char port[6] = { 0, 1, 2, 3, 4, 8 };
+
+static int do_ioctl(int cmd, void *buf)
+{
+ mm_segment_t old_fs = get_fs();
+ int ret;
+
+ if (buf != NULL)
+ ifr.ifr_data = (caddr_t) buf;
+
+ set_fs(KERNEL_DS);
+ ret = dev->do_ioctl(dev, &ifr, cmd);
+ set_fs(old_fs);
+
+ return ret;
+}
+
+static u16 mdio_read(__u16 phy_id, __u8 reg)
+{
+ if (use_et) {
+ int args[2] = { reg };
+
+ if (phy_id != ROBO_PHY_ADDR) {
+ printk(
+ "Access to real 'phy' registers unavaliable.\n"
+ "Upgrade kernel driver.\n");
+
+ return 0xffff;
+ }
+
+
+ if (do_ioctl(SIOCGETCPHYRD, &args) < 0) {
+ printk("[%s:%d] SIOCGETCPHYRD failed!\n", __FILE__, __LINE__);
+ return 0xffff;
+ }
+
+ return args[1];
+ } else {
+ struct mii_ioctl_data *mii = (struct mii_ioctl_data *) &ifr.ifr_data;
+ mii->phy_id = phy_id;
+ mii->reg_num = reg;
+
+ if (do_ioctl(SIOCGMIIREG, NULL) < 0) {
+ printk("[%s:%d] SIOCGMIIREG failed!\n", __FILE__, __LINE__);
+
+ return 0xffff;
+ }
+
+ return mii->val_out;
+ }
+}
+
+static void mdio_write(__u16 phy_id, __u8 reg, __u16 val)
+{
+ if (use_et) {
+ int args[2] = { reg, val };
+
+ if (phy_id != ROBO_PHY_ADDR) {
+ printk(
+ "Access to real 'phy' registers unavaliable.\n"
+ "Upgrade kernel driver.\n");
+
+ return;
+ }
+
+ if (do_ioctl(SIOCSETCPHYWR, args) < 0) {
+ printk("[%s:%d] SIOCGETCPHYWR failed!\n", __FILE__, __LINE__);
+ return;
+ }
+ } else {
+ struct mii_ioctl_data *mii = (struct mii_ioctl_data *)&ifr.ifr_data;
+
+ mii->phy_id = phy_id;
+ mii->reg_num = reg;
+ mii->val_in = val;
+
+ if (do_ioctl(SIOCSMIIREG, NULL) < 0) {
+ printk("[%s:%d] SIOCSMIIREG failed!\n", __FILE__, __LINE__);
+ return;
+ }
+ }
+}
+
+static int robo_reg(__u8 page, __u8 reg, __u8 op)
+{
+ int i = 3;
+
+ /* set page number */
+ mdio_write(ROBO_PHY_ADDR, REG_MII_PAGE,
+ (page << 8) | REG_MII_PAGE_ENABLE);
+
+ /* set register address */
+ mdio_write(ROBO_PHY_ADDR, REG_MII_ADDR,
+ (reg << 8) | op);
+
+ /* check if operation completed */
+ while (i--) {
+ if ((mdio_read(ROBO_PHY_ADDR, REG_MII_ADDR) & 3) == 0)
+ return 0;
+ }
+
+ printk("[%s:%d] timeout in robo_reg!\n", __FILE__, __LINE__);
+
+ return 0;
+}
+
+/*
+static void robo_read(__u8 page, __u8 reg, __u16 *val, int count)
+{
+ int i;
+
+ robo_reg(page, reg, REG_MII_ADDR_READ);
+
+ for (i = 0; i < count; i++)
+ val[i] = mdio_read(ROBO_PHY_ADDR, REG_MII_DATA0 + i);
+}
+*/
+
+static __u16 robo_read16(__u8 page, __u8 reg)
+{
+ robo_reg(page, reg, REG_MII_ADDR_READ);
+
+ return mdio_read(ROBO_PHY_ADDR, REG_MII_DATA0);
+}
+
+static __u32 robo_read32(__u8 page, __u8 reg)
+{
+ robo_reg(page, reg, REG_MII_ADDR_READ);
+
+ return mdio_read(ROBO_PHY_ADDR, REG_MII_DATA0) +
+ (mdio_read(ROBO_PHY_ADDR, REG_MII_DATA0 + 1) << 16);
+}
+
+static void robo_write16(__u8 page, __u8 reg, __u16 val16)
+{
+ /* write data */
+ mdio_write(ROBO_PHY_ADDR, REG_MII_DATA0, val16);
+
+ robo_reg(page, reg, REG_MII_ADDR_WRITE);
+}
+
+static void robo_write32(__u8 page, __u8 reg, __u32 val32)
+{
+ /* write data */
+ mdio_write(ROBO_PHY_ADDR, REG_MII_DATA0, val32 & 65535);
+ mdio_write(ROBO_PHY_ADDR, REG_MII_DATA0 + 1, val32 >> 16);
+
+ robo_reg(page, reg, REG_MII_ADDR_WRITE);
+}
+
+/* checks that attached switch is 5325E/5350 */
+static int robo_vlan5350(void)
+{
+ /* set vlan access id to 15 and read it back */
+ __u16 val16 = 15;
+ robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5350, val16);
+
+ /* 5365 will refuse this as it does not have this reg */
+ return (robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5350) == val16);
+}
+
+
+
+static int robo_probe(char *devname)
+{
+ struct ethtool_drvinfo info;
+/*
+ int i;
+*/
+ __u32 phyid;
+
+ printk("Probing device %s: ", devname);
+ strcpy(ifr.ifr_name, devname);
+
+ if ((dev = dev_get_by_name(devname)) == NULL) {
+ printk("No such device\n");
+ return 1;
+ }
+
+ info.cmd = ETHTOOL_GDRVINFO;
+ if (do_ioctl(SIOCETHTOOL, (void *) &info) < 0) {
+ printk("SIOCETHTOOL: not supported\n");
+ return 1;
+ }
+
+ /* try access using MII ioctls - get phy address */
+ if (do_ioctl(SIOCGMIIPHY, NULL) < 0) {
+ use_et = 1;
+ } else {
+ /* got phy address check for robo address */
+ struct mii_ioctl_data *mii = (struct mii_ioctl_data *) &ifr.ifr_data;
+ if (mii->phy_id != ROBO_PHY_ADDR) {
+ printk("Invalid phy address (%d)\n", mii->phy_id);
+ return 1;
+ }
+ }
+
+ phyid = mdio_read(ROBO_PHY_ADDR, 0x2) |
+ (mdio_read(ROBO_PHY_ADDR, 0x3) << 16);
+
+ if (phyid == 0xffffffff || phyid == 0x55210022) {
+ printk("No Robo switch in managed mode found\n");
+ return 1;
+ }
+
+ is_5350 = robo_vlan5350();
+
+ printk("found!\n");
+ return 0;
+}
+
+
+static int handle_vlan_port_read(void *driver, char *buf, int nr)
+{
+ __u16 val16;
+ int len = 0;
+ int j;
+
+ val16 = (nr) /* vlan */ | (0 << 12) /* read */ | (1 << 13) /* enable */;
+
+ if (is_5350) {
+ u32 val32;
+ robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5350, val16);
+ /* actual read */
+ val32 = robo_read32(ROBO_VLAN_PAGE, ROBO_VLAN_READ);
+ if ((val32 & (1 << 20)) /* valid */) {
+ for (j = 0; j < 6; j++) {
+ if (val32 & (1 << j)) {
+ len += sprintf(buf + len, "%d", j);
+ if (val32 & (1 << (j + 6))) {
+ if (j == 5) buf[len++] = 'u';
+ } else {
+ buf[len++] = 't';
+ if (robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_PORT0_DEF_TAG + (j << 1)) == nr)
+ buf[len++] = '*';
+ }
+ buf[len++] = '\t';
+ }
+ }
+ len += sprintf(buf + len, "\n");
+ }
+ } else {
+ robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS, val16);
+ /* actual read */
+ val16 = robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_READ);
+ if ((val16 & (1 << 14)) /* valid */) {
+ for (j = 0; j < 6; j++) {
+ if (val16 & (1 << j)) {
+ len += sprintf(buf + len, "%d", j);
+ if (val16 & (1 << (j + 7))) {
+ if (j == 5) buf[len++] = 'u';
+ } else {
+ buf[len++] = 't';
+ if (robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_PORT0_DEF_TAG + (j << 1)) == nr)
+ buf[len++] = '*';
+ }
+ buf[len++] = '\t';
+ }
+ }
+ len += sprintf(buf + len, "\n");
+ }
+ }
+
+ buf[len] = '\0';
+
+ return len;
+}
+
+static int handle_vlan_port_write(void *driver, char *buf, int nr)
+{
+ switch_driver *d = (switch_driver *) driver;
+ switch_vlan_config *c = switch_parse_vlan(d, buf);
+ int j;
+ __u16 val16;
+
+ if (c == NULL)
+ return -EINVAL;
+
+ for (j = 0; j < d->ports; j++) {
+ if ((c->untag | c->pvid) & (1 << j))
+ /* change default vlan tag */
+ robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_PORT0_DEF_TAG + (j << 1), nr);
+ }
+
+ /* write config now */
+ val16 = (nr) /* vlan */ | (1 << 12) /* write */ | (1 << 13) /* enable */;
+ if (is_5350) {
+ robo_write32(ROBO_VLAN_PAGE, ROBO_VLAN_WRITE_5350,
+ (1 << 20) /* valid */ | (c->untag << 6) | c->port);
+ robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5350, val16);
+ } else {
+ robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_WRITE,
+ (1 << 14) /* valid */ | (c->untag << 7) | c->port);
+ robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS, val16);
+ }
+
+ return 0;
+}
+
+#define set_switch(state) \
+ robo_write16(ROBO_CTRL_PAGE, ROBO_SWITCH_MODE, (robo_read16(ROBO_CTRL_PAGE, ROBO_SWITCH_MODE) & ~2) | (state ? 2 : 0));
+
+static int handle_enable_read(void *driver, char *buf, int nr)
+{
+ return sprintf(buf, "%d\n", (((robo_read16(ROBO_CTRL_PAGE, ROBO_SWITCH_MODE) & 2) == 2) ? 1 : 0));
+}
+
+static int handle_enable_write(void *driver, char *buf, int nr)
+{
+ set_switch(buf[0] == '1');
+
+ return 0;
+}
+
+static int handle_enable_vlan_read(void *driver, char *buf, int nr)
+{
+ return sprintf(buf, "%d\n", (((robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL0) & (1 << 7)) == (1 << 7)) ? 1 : 0));
+}
+
+static int handle_enable_vlan_write(void *driver, char *buf, int nr)
+{
+ int disable = ((buf[0] != '1') ? 1 : 0);
+
+ robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL0, disable ? 0 :
+ (1 << 7) /* 802.1Q VLAN */ | (3 << 5) /* mac check and hash */);
+ robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL1, disable ? 0 :
+ (1 << 1) | (1 << 2) | (1 << 3) /* RSV multicast */);
+ robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL4, disable ? 0 :
+ (1 << 6) /* drop invalid VID frames */);
+ robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL5, disable ? 0 :
+ (1 << 3) /* drop miss V table frames */);
+
+ return 0;
+}
+
+static int handle_reset(void *driver, char *buf, int nr)
+{
+ switch_driver *d = (switch_driver *) driver;
+ switch_vlan_config *c = switch_parse_vlan(d, buf);
+ int j;
+ __u16 val16;
+
+ if (c == NULL)
+ return -EINVAL;
+
+ /* disable switching */
+ set_switch(0);
+
+ /* reset vlans */
+ for (j = 0; j <= (is_5350 ? VLAN_ID_MAX5350 : VLAN_ID_MAX); j++) {
+ /* write config now */
+ val16 = (j) /* vlan */ | (1 << 12) /* write */ | (1 << 13) /* enable */;
+ if (is_5350)
+ robo_write32(ROBO_VLAN_PAGE, ROBO_VLAN_WRITE_5350, 0);
+ else
+ robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_WRITE, 0);
+ robo_write16(ROBO_VLAN_PAGE, (is_5350 ? ROBO_VLAN_TABLE_ACCESS_5350 : ROBO_VLAN_TABLE_ACCESS), val16);
+ }
+
+ /* reset ports to a known good state */
+ for (j = 0; j < d->ports; j++) {
+ robo_write16(ROBO_CTRL_PAGE, port[j], 0x0000);
+ robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_PORT0_DEF_TAG + (j << 1), 0);
+ }
+
+ /* enable switching */
+ set_switch(1);
+
+ /* enable vlans */
+ handle_enable_vlan_write(driver, "1", 0);
+
+ return 0;
+}
+
+static int __init robo_init(void)
+{
+ int notfound = 1;
+
+ device = strdup("ethX");
+ for (device[3] = '0'; (device[3] <= '3') && notfound; device[3]++) {
+ notfound = robo_probe(device);
+ }
+ device[3]--;
+
+ if (notfound) {
+ kfree(device);
+ return -ENODEV;
+ } else {
+ switch_config cfg[] = {
+ {"enable", handle_enable_read, handle_enable_write},
+ {"enable_vlan", handle_enable_vlan_read, handle_enable_vlan_write},
+ {"reset", NULL, handle_reset},
+ {NULL, NULL, NULL}
+ };
+ switch_config vlan[] = {
+ {"ports", handle_vlan_port_read, handle_vlan_port_write},
+ {NULL, NULL, NULL}
+ };
+ switch_driver driver = {
+ name: DRIVER_NAME,
+ version: DRIVER_VERSION,
+ interface: device,
+ cpuport: 5,
+ ports: 6,
+ vlans: 16,
+ driver_handlers: cfg,
+ port_handlers: NULL,
+ vlan_handlers: vlan,
+ };
+
+ return switch_register_driver(&driver);
+ }
+}
+
+static void __exit robo_exit(void)
+{
+ switch_unregister_driver(DRIVER_NAME);
+ kfree(device);
+}
+
+
+MODULE_AUTHOR("Felix Fietkau <openwrt@nbd.name>");
+MODULE_LICENSE("GPL");
+
+module_init(robo_init);
+module_exit(robo_exit);
generated by cgit v1.1 at 2024-11-24 16:48:28 +0000