1 files changed, 96 insertions, 0 deletions
diff --git a/package/uboot-ar71xx/files/board/zyxel/nbg460n/nbg460n.c b/package/uboot-ar71xx/files/board/zyxel/nbg460n/nbg460n.c
new file mode 100644
index 0000000..03a479d
--- /dev/null
+++ b/package/uboot-ar71xx/files/board/zyxel/nbg460n/nbg460n.c
@@ -0,0 +1,96 @@
+/*
+ * (C) Copyright 2010
+ * Michael Kurz <michi.kurz@googlemail.com>.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <asm/reboot.h>
+#include <asm/ar71xx.h>
+#include <asm/ar71xx_gpio.h>
+
+#define NBG460N_WAN_LED			19
+
+phys_size_t initdram(int board_type)
+{
+    return (32*1024*1024);
+}
+
+int checkboard(void)
+{
+	// Set pin 19 to 1, to stop WAN LED blinking
+    ar71xx_setpindir(NBG460N_WAN_LED, 1);
+    ar71xx_setpin(NBG460N_WAN_LED, 1);
+
+    printf("U-boot on Zyxel NBG460N\n");
+    return 0;
+}
+
+void _machine_restart(void)
+{
+	for (;;) {
+		writel((RESET_MODULE_FULL_CHIP | RESET_MODULE_DDR),
+			KSEG1ADDR(AR71XX_RESET_BASE + AR91XX_RESET_REG_RESET_MODULE));
+        readl(KSEG1ADDR(AR71XX_RESET_BASE + AR91XX_RESET_REG_RESET_MODULE));
+	}
+}
+
+int board_eth_init(bd_t *bis)
+{
+    char *phynames[] = {RTL8366_DEVNAME, RTL8366_DEVNAME};
+    u16 phyids[] = {RTL8366_LANPHY_ID, RTL8366_WANPHY_ID};
+    u16 phyfixed[] = {1, 0};
+
+    if (ag71xx_register(bis, phynames, phyids, phyfixed) <= 0)
+        return -1;
+
+	if (rtl8366s_initialize())
+        return -1;
+
+    if (rtl8366_mii_register(bis))
+        return -1;
+		
+    return 0;
+}
+
+int misc_init_r(void) {
+    uint8_t macaddr[6];
+    uint8_t enetaddr[6];
+
+	debug("Testing mac addresses\n");
+	
+    memcpy(macaddr, (uint8_t *) CONFIG_ETHADDR_ADDR, 6);
+
+    if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
+        debug("Setting eth0 mac addr to %pM\n", macaddr);
+        eth_setenv_enetaddr("ethaddr", macaddr);
+    }
+
+    if (!eth_getenv_enetaddr("eth1addr", enetaddr)) {
+		macaddr[5] += 1;
+        debug("Setting eth1 mac addr to %pM\n", macaddr);
+        eth_setenv_enetaddr("eth1addr", macaddr);
+    }
+
+    return 0;
+}