summaryrefslogtreecommitdiff
path: root/package/uboot-ifxmips/files/drivers/ifx_sw.c
diff options
context:
space:
mode:
Diffstat (limited to 'package/uboot-ifxmips/files/drivers/ifx_sw.c')
-rw-r--r--package/uboot-ifxmips/files/drivers/ifx_sw.c423
1 files changed, 423 insertions, 0 deletions
diff --git a/package/uboot-ifxmips/files/drivers/ifx_sw.c b/package/uboot-ifxmips/files/drivers/ifx_sw.c
new file mode 100644
index 0000000..ac8f1c8
--- /dev/null
+++ b/package/uboot-ifxmips/files/drivers/ifx_sw.c
@@ -0,0 +1,423 @@
+/*
+ * DANUBE internal switch ethernet driver.
+ *
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) \
+ && defined(CONFIG_DANUBE_SWITCH)
+
+#include <malloc.h>
+#include <net.h>
+#include <asm/danube.h>
+#include <asm/addrspace.h>
+#include <asm/pinstrap.h>
+
+#define MII_MODE 1
+#define REV_MII_MODE 2
+
+#define TX_CHAN_NO 7
+#define RX_CHAN_NO 6
+
+#define NUM_RX_DESC PKTBUFSRX
+#define NUM_TX_DESC 8
+#define MAX_PACKET_SIZE 1536
+#define TOUT_LOOP 100
+#define PHY0_ADDR 1 /*fixme: set the correct value here*/
+
+#define DMA_WRITE_REG(reg, value) *((volatile u32 *)reg) = (u32)value
+#define DMA_READ_REG(reg, value) value = (u32)*((volatile u32*)reg)
+
+#define SW_WRITE_REG(reg, value) *((volatile u32*)reg) = (u32)value
+#define SW_READ_REG(reg, value) value = (u32)*((volatile u32*)reg)
+
+typedef struct
+{
+ union
+ {
+ struct
+ {
+ volatile u32 OWN :1;
+ volatile u32 C :1;
+ volatile u32 Sop :1;
+ volatile u32 Eop :1;
+ volatile u32 reserved :3;
+ volatile u32 Byteoffset :2;
+ volatile u32 reserve :7;
+ volatile u32 DataLen :16;
+ }field;
+
+ volatile u32 word;
+ }status;
+
+ volatile u32 DataPtr;
+} danube_rx_descriptor_t;
+
+typedef struct
+{
+ union
+ {
+ struct
+ {
+ volatile u32 OWN :1;
+ volatile u32 C :1;
+ volatile u32 Sop :1;
+ volatile u32 Eop :1;
+ volatile u32 Byteoffset :5;
+ volatile u32 reserved :7;
+ volatile u32 DataLen :16;
+ }field;
+
+ volatile u32 word;
+ }status;
+
+ volatile u32 DataPtr;
+} danube_tx_descriptor_t;
+
+
+
+
+static danube_rx_descriptor_t rx_des_ring[NUM_RX_DESC] __attribute__ ((aligned(8)));
+static danube_tx_descriptor_t tx_des_ring[NUM_TX_DESC] __attribute__ ((aligned(8)));
+static int tx_num, rx_num;
+
+int danube_switch_init(struct eth_device *dev, bd_t * bis);
+int danube_switch_send(struct eth_device *dev, volatile void *packet,int length);
+int danube_switch_recv(struct eth_device *dev);
+void danube_switch_halt(struct eth_device *dev);
+static void danube_init_switch_chip(int mode);
+static void danube_dma_init(void);
+
+
+
+int danube_switch_initialize(bd_t * bis)
+{
+ struct eth_device *dev;
+
+#if 0
+ printf("Entered danube_switch_initialize()\n");
+#endif
+
+ if (!(dev = (struct eth_device *) malloc (sizeof *dev)))
+ {
+ printf("Failed to allocate memory\n");
+ return 0;
+ }
+ memset(dev, 0, sizeof(*dev));
+
+ danube_dma_init();
+ danube_init_switch_chip(REV_MII_MODE);
+
+#ifdef CLK_OUT2_25MHZ
+ *DANUBE_GPIO_P0_DIR=0x0000ae78;
+ *DANUBE_GPIO_P0_ALTSEL0=0x00008078;
+ //joelin for Mii-1 *DANUBE_GPIO_P0_ALTSEL1=0x80000080;
+ *DANUBE_GPIO_P0_ALTSEL1=0x80000000; //joelin for Mii-1
+ *DANUBE_CGU_IFCCR=0x00400010;
+ *DANUBE_GPIO_P0_OD=0x0000ae78;
+#endif
+
+ /*patch for 6996*/
+
+ *DANUBE_RCU_RST_REQ |=1;
+ mdelay(200);
+ *DANUBE_RCU_RST_REQ &=(unsigned long)~1;
+ mdelay(1);
+ /*while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
+ *DANUBE_PPE_ETOP_MDIO_ACC =0x80123602;
+ */
+ /*while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
+ *DANUBE_PPE_ETOP_MDIO_ACC =0x80123602;
+ */
+ /***************/
+ sprintf(dev->name, "danube Switch");
+ dev->init = danube_switch_init;
+ dev->halt = danube_switch_halt;
+ dev->send = danube_switch_send;
+ dev->recv = danube_switch_recv;
+
+ eth_register(dev);
+
+#if 0
+ printf("Leaving danube_switch_initialize()\n");
+#endif
+ while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
+ *DANUBE_PPE_ETOP_MDIO_ACC =0x8001840F;
+ while((*DANUBE_PPE_ETOP_MDIO_ACC)&0x80000000);
+ *DANUBE_PPE_ETOP_MDIO_ACC =0x8003840F;
+ while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
+ *DANUBE_PPE_ETOP_MDIO_ACC =0x8005840F;
+ //while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
+ //*DANUBE_PPE_ETOP_MDIO_ACC =0x8006840F;
+ while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
+ *DANUBE_PPE_ETOP_MDIO_ACC =0x8007840F;
+ while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
+ *DANUBE_PPE_ETOP_MDIO_ACC =0x8008840F;
+ while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
+ *DANUBE_PPE_ETOP_MDIO_ACC =0x8001840F;
+ while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
+ *DANUBE_PPE_ETOP_MDIO_ACC =0x80123602;
+#ifdef CLK_OUT2_25MHZ
+ while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
+ *DANUBE_PPE_ETOP_MDIO_ACC =0x80334000;
+#endif
+
+ return 1;
+}
+
+int danube_switch_init(struct eth_device *dev, bd_t * bis)
+{
+ int i;
+
+ tx_num=0;
+ rx_num=0;
+
+ /* Reset DMA
+ */
+// serial_puts("i \n\0");
+
+ *DANUBE_DMA_CS=RX_CHAN_NO;
+ *DANUBE_DMA_CCTRL=0x2;/*fix me, need to reset this channel first?*/
+ *DANUBE_DMA_CPOLL= 0x80000040;
+ /*set descriptor base*/
+ *DANUBE_DMA_CDBA=(u32)rx_des_ring;
+ *DANUBE_DMA_CDLEN=NUM_RX_DESC;
+ *DANUBE_DMA_CIE = 0;
+ *DANUBE_DMA_CCTRL=0x30000;
+
+ *DANUBE_DMA_CS=TX_CHAN_NO;
+ *DANUBE_DMA_CCTRL=0x2;/*fix me, need to reset this channel first?*/
+ *DANUBE_DMA_CPOLL= 0x80000040;
+ *DANUBE_DMA_CDBA=(u32)tx_des_ring;
+ *DANUBE_DMA_CDLEN=NUM_TX_DESC;
+ *DANUBE_DMA_CIE = 0;
+ *DANUBE_DMA_CCTRL=0x30100;
+
+ for(i=0;i < NUM_RX_DESC; i++)
+ {
+ danube_rx_descriptor_t * rx_desc = KSEG1ADDR(&rx_des_ring[i]);
+ rx_desc->status.word=0;
+ rx_desc->status.field.OWN=1;
+ rx_desc->status.field.DataLen=PKTSIZE_ALIGN; /* 1536 */
+ rx_desc->DataPtr=(u32)KSEG1ADDR(NetRxPackets[i]);
+ }
+
+ for(i=0;i < NUM_TX_DESC; i++)
+ {
+ danube_tx_descriptor_t * tx_desc = KSEG1ADDR(&tx_des_ring[i]);
+ memset(tx_desc, 0, sizeof(tx_des_ring[0]));
+ }
+ /* turn on DMA rx & tx channel
+ */
+ *DANUBE_DMA_CS=RX_CHAN_NO;
+ *DANUBE_DMA_CCTRL|=1;/*reset and turn on the channel*/
+
+ return 0;
+}
+
+void danube_switch_halt(struct eth_device *dev)
+{
+ int i;
+ for(i=0;i<8;i++)
+ {
+ *DANUBE_DMA_CS=i;
+ *DANUBE_DMA_CCTRL&=~1;/*stop the dma channel*/
+ }
+// udelay(1000000);
+}
+
+int danube_switch_send(struct eth_device *dev, volatile void *packet,int length)
+{
+
+ int i;
+ int res = -1;
+
+ danube_tx_descriptor_t * tx_desc= KSEG1ADDR(&tx_des_ring[tx_num]);
+
+ if (length <= 0)
+ {
+ printf ("%s: bad packet size: %d\n", dev->name, length);
+ goto Done;
+ }
+
+ for(i=0; tx_desc->status.field.OWN==1; i++)
+ {
+ if(i>=TOUT_LOOP)
+ {
+ printf("NO Tx Descriptor...");
+ goto Done;
+ }
+ }
+
+ //serial_putc('s');
+
+ tx_desc->status.field.Sop=1;
+ tx_desc->status.field.Eop=1;
+ tx_desc->status.field.C=0;
+ tx_desc->DataPtr = (u32)KSEG1ADDR(packet);
+ if(length<60)
+ tx_desc->status.field.DataLen = 60;
+ else
+ tx_desc->status.field.DataLen = (u32)length;
+
+ asm("SYNC");
+ tx_desc->status.field.OWN=1;
+
+ res=length;
+ tx_num++;
+ if(tx_num==NUM_TX_DESC) tx_num=0;
+ *DANUBE_DMA_CS=TX_CHAN_NO;
+
+ if(!(*DANUBE_DMA_CCTRL & 1))
+ *DANUBE_DMA_CCTRL|=1;
+
+Done:
+ return res;
+}
+
+int danube_switch_recv(struct eth_device *dev)
+{
+
+ int length = 0;
+
+ danube_rx_descriptor_t * rx_desc;
+ int anchor_num=0;
+ int i;
+ for (;;)
+ {
+ rx_desc = KSEG1ADDR(&rx_des_ring[rx_num]);
+
+ if ((rx_desc->status.field.C == 0) || (rx_desc->status.field.OWN == 1))
+ {
+ break;
+ }
+
+
+ length = rx_desc->status.field.DataLen;
+ if (length)
+ {
+ NetReceive((void*)KSEG1ADDR(NetRxPackets[rx_num]), length - 4);
+ // serial_putc('*');
+ }
+ else
+ {
+ printf("Zero length!!!\n");
+ }
+
+ rx_desc->status.field.Sop=0;
+ rx_desc->status.field.Eop=0;
+ rx_desc->status.field.C=0;
+ rx_desc->status.field.DataLen=PKTSIZE_ALIGN;
+ rx_desc->status.field.OWN=1;
+ rx_num++;
+ if(rx_num==NUM_RX_DESC) rx_num=0;
+
+ }
+
+ return length;
+}
+
+
+static void danube_init_switch_chip(int mode)
+{
+ int i;
+ /*get and set mac address for MAC*/
+ static unsigned char addr[6];
+ char *tmp,*end;
+ tmp = getenv ("ethaddr");
+ if (NULL == tmp) {
+ printf("Can't get environment ethaddr!!!\n");
+ // return NULL;
+ } else {
+ printf("ethaddr=%s\n", tmp);
+ }
+ *DANUBE_PMU_PWDCR = *DANUBE_PMU_PWDCR & 0xFFFFEFDF;
+ *DANUBE_PPE32_ETOP_MDIO_CFG &= ~0x6;
+ *DANUBE_PPE32_ENET_MAC_CFG = 0x187;
+
+ // turn on port0, set to rmii and turn off port1.
+ if(mode==REV_MII_MODE)
+ {
+ *DANUBE_PPE32_ETOP_CFG = (*DANUBE_PPE32_ETOP_CFG & 0xfffffffc) | 0x0000000a;
+ }
+ else if (mode == MII_MODE)
+ {
+ *DANUBE_PPE32_ETOP_CFG = (*DANUBE_PPE32_ETOP_CFG & 0xfffffffc) | 0x00000008;
+ }
+
+ *DANUBE_PPE32_ETOP_IG_PLEN_CTRL = 0x4005ee; // set packetlen.
+ *ENET_MAC_CFG|=1<<11;/*enable the crc*/
+ return;
+}
+
+
+static void danube_dma_init(void)
+{
+ int i;
+// serial_puts("d \n\0");
+
+ *DANUBE_PMU_PWDCR &=~(1<<DANUBE_PMU_DMA_SHIFT);/*enable DMA from PMU*/
+ /* Reset DMA
+ */
+ *DANUBE_DMA_CTRL|=1;
+ *DANUBE_DMA_IRNEN=0;/*disable all the interrupts first*/
+
+ /* Clear Interrupt Status Register
+ */
+ *DANUBE_DMA_IRNCR=0xfffff;
+ /*disable all the dma interrupts*/
+ *DANUBE_DMA_IRNEN=0;
+ /*disable channel 0 and channel 1 interrupts*/
+
+ *DANUBE_DMA_CS=RX_CHAN_NO;
+ *DANUBE_DMA_CCTRL=0x2;/*fix me, need to reset this channel first?*/
+ *DANUBE_DMA_CPOLL= 0x80000040;
+ /*set descriptor base*/
+ *DANUBE_DMA_CDBA=(u32)rx_des_ring;
+ *DANUBE_DMA_CDLEN=NUM_RX_DESC;
+ *DANUBE_DMA_CIE = 0;
+ *DANUBE_DMA_CCTRL=0x30000;
+
+ *DANUBE_DMA_CS=TX_CHAN_NO;
+ *DANUBE_DMA_CCTRL=0x2;/*fix me, need to reset this channel first?*/
+ *DANUBE_DMA_CPOLL= 0x80000040;
+ *DANUBE_DMA_CDBA=(u32)tx_des_ring;
+ *DANUBE_DMA_CDLEN=NUM_TX_DESC;
+ *DANUBE_DMA_CIE = 0;
+ *DANUBE_DMA_CCTRL=0x30100;
+ /*enable the poll function and set the poll counter*/
+ //*DANUBE_DMA_CPOLL=DANUBE_DMA_POLL_EN | (DANUBE_DMA_POLL_COUNT<<4);
+ /*set port properties, enable endian conversion for switch*/
+ *DANUBE_DMA_PS=0;
+ *DANUBE_DMA_PCTRL|=0xf<<8;/*enable 32 bit endian conversion*/
+
+ return;
+}
+
+
+
+
+
+#endif