diff options
Diffstat (limited to 'package/uboot-lantiq/files/board/arcadyan/board.c')
-rw-r--r-- | package/uboot-lantiq/files/board/arcadyan/board.c | 105 |
1 files changed, 105 insertions, 0 deletions
diff --git a/package/uboot-lantiq/files/board/arcadyan/board.c b/package/uboot-lantiq/files/board/arcadyan/board.c index 005efbb..57f4603 100644 --- a/package/uboot-lantiq/files/board/arcadyan/board.c +++ b/package/uboot-lantiq/files/board/arcadyan/board.c @@ -312,6 +312,107 @@ static int external_switch_rtl8306(void) } #endif +#ifdef CONFIG_RTL8306G_SWITCH +#define ID_RTL8306 0x5988 + +static int external_switch_rtl8306G(void) +{ + unsigned short chipid,val; + int i; + static char * const name = "lq_cpe_eth"; + unsigned int chipid2, chipver, chiptype; + char str[128]; + int cpu_mask = 1 << 5; + udelay(100000); + + puts("\nsearching for rtl8306 switch ... "); + if (miiphy_read(name, 4, 30, &chipid) == 0) { + if (chipid == ID_RTL8306) { + puts("found\nReset Hard\n"); +#ifdef CONFIG_ARV752DPW + //gpio 19 + //reset reset ping to high + *DANUBE_GPIO_P1_DIR |= 8; + *DANUBE_GPIO_P1_OUT |= 8; + udelay(500*1000); + *DANUBE_GPIO_P1_OUT &= ~(8); // now low again for at least 10 ms + udelay(500*1000); + *DANUBE_GPIO_P1_OUT |= 8; + udelay(500*1000); + puts("Done\n"); +#endif + /* set led mode */ + + miiphy_write(name, 0, 0, 0x3100); + miiphy_write(name, 0, 18, 0x7fff); + miiphy_write(name, 0, 19, 0xffff); + miiphy_write(name, 0, 22, 0x877f); + miiphy_write(name, 0, 24, 0x0ed1); + + miiphy_write(name, 1, 0, 0x3100); + miiphy_write(name, 1, 22, 0x877f); + miiphy_write(name, 1, 24, 0x1ed2); + + miiphy_write(name, 2, 0, 0x3100); + miiphy_write(name, 2, 22, 0x877f); + miiphy_write(name, 2, 23, 0x0020); + miiphy_write(name, 2, 24, 0x2ed4); + + miiphy_write(name, 3, 0, 0x3100); + miiphy_write(name, 3, 22, 0x877f); + miiphy_write(name, 3, 24, 0x3ed8); + + miiphy_write(name, 4, 0, 0x3100); + miiphy_write(name, 4, 22, 0x877f); + miiphy_write(name, 4, 24, 0x4edf); + + miiphy_write(name, 5, 0, 0x3100); + miiphy_write(name, 6, 0, 0x2100); + + //important. enable phy 5 link status, for rmii + miiphy_write(name, 6, 22, 0x873f); + + miiphy_write(name, 6, 24, 0x8eff); + //disable ports + for (i=0;i<5;i++) { + miiphy_read(name, 0, 24, &val); + val&=~(1<<10); + val&=~(1<<11); + miiphy_write(name, 0, 24, val); + } + + puts("Reset Soft\n"); + miiphy_write(name,0 ,0 ,1<<15); + for (i=0;i<1000;i++) + { + miiphy_read(name,0 ,0 ,&val); + if (!(val&1<<15)) + break; + udelay(1000); + } + if (i==1000) + puts("Failed\n"); + else + puts("Success\n"); + //enable ports egain + for (i=0;i<5;i++) // enable ports + { + miiphy_read(name, 0, 24, &val); + val|=(1<<10); + val|=(1<<11); + miiphy_write(name, 0, 24, val); + } + puts("\n"); + return 0; + } + puts("failed\n"); + } + puts("\nno known switch found ... \n"); + + return 0; +} +#endif + #ifdef CONFIG_AR8216_SWITCH static int external_switch_ar8216(void) { @@ -345,6 +446,10 @@ int board_eth_init(bd_t *bis) *DANUBE_RCU_RST_REQ &=(unsigned long)~1; udelay(1000); +#ifdef CONFIG_RTL8306G_SWITCH + if (external_switch_rtl8306G()<0) + return -1; +#endif #ifdef CONFIG_RTL8306_SWITCH if (external_switch_rtl8306()<0) return -1; |