diff options
Diffstat (limited to 'package/uboot-lantiq/files/board/infineon/easy50812/ar9.c')
| -rw-r--r-- | package/uboot-lantiq/files/board/infineon/easy50812/ar9.c | 619 |
1 files changed, 0 insertions, 619 deletions
diff --git a/package/uboot-lantiq/files/board/infineon/easy50812/ar9.c b/package/uboot-lantiq/files/board/infineon/easy50812/ar9.c deleted file mode 100644 index d4cd049..0000000 --- a/package/uboot-lantiq/files/board/infineon/easy50812/ar9.c +++ /dev/null @@ -1,619 +0,0 @@ -/* -* (C) Copyright 2003 -* Wolfgang Denk, DENX Software Engineering, wd@denx.de. -* -* (C) Copyright 2010 -* Thomas Langer, Ralph Hempel -* -* See file CREDITS for list of people who contributed to this -* project. -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License as -* published by the Free Software Foundation; either version 2 of -* the License, or (at your option) any later version. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 59 Temple Place, Suite 330, Boston, -* MA 02111-1307 USA -*/ - -#include <common.h> -#include <command.h> -#include <netdev.h> -#include <miiphy.h> -#include <asm/addrspace.h> -#include <asm/ar9.h> -#include <asm/reboot.h> -#include <asm/io.h> -#if defined(CONFIG_CMD_HTTPD) -#include <httpd.h> -#endif - -extern ulong ifx_get_ddr_hz(void); -extern ulong ifx_get_cpuclk(void); - -/* definitions for external PHYs / Switches */ -/* Split values into phy address and register address */ -#define PHYADDR(_reg) ((_reg >> 5) & 0xff), (_reg & 0x1f) - -/* IDs and registers of known external switches */ -#define ID_SAMURAI_0 0x1020 -#define ID_SAMURAI_1 0x0007 -#define SAMURAI_ID_REG0 0xA0 -#define SAMURAI_ID_REG1 0xA1 -#define ID_TANTOS 0x2599 - -#define RGMII_MODE 0 -#define MII_MODE 1 -#define REV_MII_MODE 2 -#define RED_MII_MODE_IC 3 /*Input clock */ -#define RGMII_MODE_100MB 4 -#define TURBO_REV_MII_MODE 6 /*Turbo Rev Mii mode */ -#define RED_MII_MODE_OC 7 /*Output clock */ -#define RGMII_MODE_10MB 8 - -#define mdelay(n) udelay((n)*1000) - -static void ar9_sw_chip_init(u8 port, u8 mode); -static void ar9_enable_sw_port(u8 port, u8 state); -static void ar9_configure_sw_port(u8 port, u8 mode); -static u16 ar9_smi_reg_read(u16 reg); -static u16 ar9_smi_reg_write(u16 reg, u16 data); -static char * const name = "lq_cpe_eth"; -static int external_switch_init(void); - -void _machine_restart(void) -{ - *AR9_RCU_RST_REQ |= AR9_RST_ALL; -} - -#ifdef CONFIG_SYS_RAMBOOT -phys_size_t initdram(int board_type) -{ - return get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM); -} -#elif defined(CONFIG_USE_DDR_RAM) -phys_size_t initdram(int board_type) -{ - return (CONFIG_SYS_MAX_RAM); -} -#else - -static ulong max_sdram_size(void) /* per Chip Select */ -{ - /* The only supported SDRAM data width is 16bit. - */ -#define CFG_DW 4 - - /* The only supported number of SDRAM banks is 4. - */ -#define CFG_NB 4 - - ulong cfgpb0 = *AR9_SDRAM_MC_CFGPB0; - int cols = cfgpb0 & 0xF; - int rows = (cfgpb0 & 0xF0) >> 4; - ulong size = (1 << (rows + cols)) * CFG_DW * CFG_NB; - - return size; -} - -/* -* Check memory range for valid RAM. A simple memory test determines -* the actually available RAM size between addresses `base' and -* `base + maxsize'. -*/ - -static long int dram_size(long int *base, long int maxsize) -{ - volatile long int *addr; - ulong cnt, val; - ulong save[32]; /* to make test non-destructive */ - unsigned char i = 0; - - for (cnt = (maxsize / sizeof (long)) >> 1; cnt > 0; cnt >>= 1) { - addr = base + cnt; /* pointer arith! */ - - save[i++] = *addr; - *addr = ~cnt; - } - - /* write 0 to base address */ - addr = base; - save[i] = *addr; - *addr = 0; - - /* check at base address */ - if ((val = *addr) != 0) { - *addr = save[i]; - return (0); - } - - for (cnt = 1; cnt < maxsize / sizeof (long); cnt <<= 1) { - addr = base + cnt; /* pointer arith! */ - - val = *addr; - *addr = save[--i]; - - if (val != (~cnt)) { - return (cnt * sizeof (long)); - } - } - return (maxsize); -} - -phys_size_t initdram(int board_type) -{ - int rows, cols, best_val = *AR9_SDRAM_MC_CFGPB0; - ulong size, max_size = 0; - ulong our_address; - - /* load t9 into our_address */ - asm volatile ("move %0, $25" : "=r" (our_address) :); - - /* Can't probe for RAM size unless we are running from Flash. - * find out whether running from DRAM or Flash. - */ - if (CPHYSADDR(our_address) < CPHYSADDR(PHYS_FLASH_1)) - { - return max_sdram_size(); - } - - for (cols = 0x8; cols <= 0xC; cols++) - { - for (rows = 0xB; rows <= 0xD; rows++) - { - *AR9_SDRAM_MC_CFGPB0 = (0x14 << 8) | - (rows << 4) | cols; - size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, - max_sdram_size()); - - if (size > max_size) - { - best_val = *AR9_SDRAM_MC_CFGPB0; - max_size = size; - } - } - } - - *AR9_SDRAM_MC_CFGPB0 = best_val; - return max_size; -} -#endif - -int checkboard (void) -{ - unsigned long chipid = *AR9_MPS_CHIPID; - int part_num; - - puts ("Board: "); - - part_num = AR9_MPS_CHIPID_PARTNUM_GET(chipid); - switch (part_num) - { - case 0x16C: - puts("ARX188 "); - break; - case 0x16D: - puts("ARX168 "); - break; - case 0x16F: - puts("ARX182 "); - break; - case 0x170: - puts("GRX188 "); - break; - case 0x171: - puts("GRX168 "); - break; - default: - printf ("unknown, chip part number 0x%03X ", part_num); - break; - } - printf ("V1.%ld, ", AR9_MPS_CHIPID_VERSION_GET(chipid)); - - printf("DDR Speed %ld MHz, ", ifx_get_ddr_hz()/1000000); - printf("CPU Speed %ld MHz\n", ifx_get_cpuclk()/1000000); - - return 0; -} - -#ifdef CONFIG_SKIP_LOWLEVEL_INIT -int board_early_init_f(void) -{ -#ifdef CONFIG_EBU_ADDSEL0 - (*AR9_EBU_ADDSEL0) = CONFIG_EBU_ADDSEL0; -#endif -#ifdef CONFIG_EBU_ADDSEL1 - (*AR9_EBU_ADDSEL1) = CONFIG_EBU_ADDSEL1; -#endif -#ifdef CONFIG_EBU_ADDSEL2 - (*AR9_EBU_ADDSEL2) = CONFIG_EBU_ADDSEL2; -#endif -#ifdef CONFIG_EBU_ADDSEL3 - (*AR9_EBU_ADDSEL3) = CONFIG_EBU_ADDSEL3; -#endif -#ifdef CONFIG_EBU_BUSCON0 - (*AR9_EBU_BUSCON0) = CONFIG_EBU_BUSCON0; -#endif -#ifdef CONFIG_EBU_BUSCON1 - (*AR9_EBU_BUSCON1) = CONFIG_EBU_BUSCON1; -#endif -#ifdef CONFIG_EBU_BUSCON2 - (*AR9_EBU_BUSCON2) = CONFIG_EBU_BUSCON2; -#endif -#ifdef CONFIG_EBU_BUSCON3 - (*AR9_EBU_BUSCON3) = CONFIG_EBU_BUSCON3; -#endif - - return 0; -} -#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ - -int board_eth_init(bd_t *bis) -{ -#if defined(CONFIG_IFX_ETOP) - - *AR9_PMU_PWDCR &= 0xFFFFEFDF; - *AR9_PMU_PWDCR &= ~AR9_PMU_DMA; /* enable DMA from PMU */ - - if (lq_eth_initialize(bis) < 0) - return -1; - - *AR9_RCU_RST_REQ |= 1; - udelay(200000); - *AR9_RCU_RST_REQ &= (unsigned long)~1; - udelay(1000); - -#ifdef CONFIG_EXTRA_SWITCH - if (external_switch_init()<0) - return -1; -#endif /* CONFIG_EXTRA_SWITCH */ -#endif /* CONFIG_IFX_ETOP */ - - return 0; -} - -static void ar9_configure_sw_port(u8 port, u8 mode) -{ - if(port) - { - if (mode == 1) //MII mode - { - *AR9_GPIO_P2_ALTSEL0 = *AR9_GPIO_P2_ALTSEL0 | (0xf000); - *AR9_GPIO_P2_ALTSEL1 = *AR9_GPIO_P2_ALTSEL1 & ~(0xf000); - *AR9_GPIO_P2_DIR = (*AR9_GPIO_P2_DIR & ~(0xf000)) | 0x2000; - *AR9_GPIO_P2_OD = *AR9_GPIO_P2_OD | 0x2000; - } - else if(mode == 2 || mode == 6) //Rev Mii mode - { - *AR9_GPIO_P2_ALTSEL0 = *AR9_GPIO_P2_ALTSEL0 | (0xf000); - *AR9_GPIO_P2_ALTSEL1 = *AR9_GPIO_P2_ALTSEL1 & ~(0xf000); - *AR9_GPIO_P2_DIR = (*AR9_GPIO_P2_DIR | (0xf000)) & ~0x2000; - *AR9_GPIO_P2_OD = *AR9_GPIO_P2_OD | 0xd000; - } - } - else //Port 0 - { - if (mode == 1) //MII mode - { - *AR9_GPIO_P2_ALTSEL0 = *AR9_GPIO_P2_ALTSEL0 | (0x0303); - *AR9_GPIO_P2_ALTSEL1 = *AR9_GPIO_P2_ALTSEL1 & ~(0x0303); - *AR9_GPIO_P2_DIR = (*AR9_GPIO_P2_DIR & ~(0x0303)) | 0x0100; - *AR9_GPIO_P2_OD = *AR9_GPIO_P2_OD | 0x0100; - } - else if(mode ==2 || mode ==6) //Rev Mii mode - { - *AR9_GPIO_P2_ALTSEL0 = *AR9_GPIO_P2_ALTSEL0 | (0x0303); - *AR9_GPIO_P2_ALTSEL1 = *AR9_GPIO_P2_ALTSEL1 & ~(0x0303); - *AR9_GPIO_P2_DIR = (*AR9_GPIO_P2_DIR | (0x0303)) & ~0x0100; - *AR9_GPIO_P2_OD = *AR9_GPIO_P2_OD | 0x0203; - } - } -} - -/* -Call this function to place either MAC port 0 or 1 into working mode. -Parameters: -port - select ports 0 or 1. -state of interface : state -0: RGMII -1: MII -2: Rev MII -3: Reduce MII (input clock) -4: RGMII 100mb -5: Reserve -6: Turbo Rev MII -7: Reduce MII (output clock) -*/ -void ar9_enable_sw_port(u8 port, u8 state) -{ - REG32(AR9_SW_GCTL0) |= 0x80000000; - if (port == 0) - { - REG32(AR9_SW_RGMII_CTL) &= 0xffcffc0e ; - //#if AR9_REFBOARD_TANTOS - REG32(0xbf20302c) &= 0xffff81ff; - REG32(0xbf20302c) |= 4<<9 ; - //#endif - REG32(AR9_SW_RGMII_CTL) |= ((u32)(state &0x3))<<8; - if((state &0x3) == 0) - { - REG32(AR9_SW_RGMII_CTL) &= 0xfffffff3; - if(state == 4) - REG32(AR9_SW_RGMII_CTL) |= 0x4; - else - REG32(AR9_SW_RGMII_CTL) |= 0x8; - } - if(state == 6) - REG32(AR9_SW_RGMII_CTL) |= ((u32) (1<<20)); - if(state == 7) - REG32(AR9_SW_RGMII_CTL) |= ((u32) (1<<21)); - } -// *AR9_PPE32_ETOP_CFG = *AR9_PPE32_ETOP_CFG & 0xfffffffe; - else - { - REG32(AR9_SW_RGMII_CTL) &= 0xff303fff ; - REG32(AR9_SW_RGMII_CTL) |= ((u32)(state &0x3))<<18; - if((state &0x3) == 0) - { - REG32(AR9_SW_RGMII_CTL) &= 0xffffcfff; - if(state == 4) - REG32(AR9_SW_RGMII_CTL) |= 0x1000; - else - REG32(AR9_SW_RGMII_CTL) |= 0x2000; - } - if(state == 6) - REG32(AR9_SW_RGMII_CTL) |= ((u32) (1<<22)); - if(state == 7) - REG32(AR9_SW_RGMII_CTL) |= ((u32) (1<<23)); - } -} - -void pci_reset(void) -{ - int i,j; -#define AR9_V1_PCI_RST_FIX 1 -#if AR9_V1_PCI_RST_FIX // 5th June 2008 Add GPIO19 to control EJTAG_TRST - *AR9_GPIO_P1_ALTSEL0 = *AR9_GPIO_P1_ALTSEL0 & ~0x8; - *AR9_GPIO_P1_ALTSEL1 = *AR9_GPIO_P1_ALTSEL1 & ~0x8; - *AR9_GPIO_P1_DIR = *AR9_GPIO_P1_DIR | 0x8; - *AR9_GPIO_P1_OD = *AR9_GPIO_P1_OD | 0x8; - *AR9_GPIO_P1_OUT = *AR9_GPIO_P1_OUT | 0x8; - *AR9_GPIO_P0_ALTSEL0 = *AR9_GPIO_P0_ALTSEL0 & ~0x4000; - *AR9_GPIO_P0_ALTSEL1 = *AR9_GPIO_P0_ALTSEL1 & ~0x4000; - *AR9_GPIO_P0_DIR = *AR9_GPIO_P0_DIR | 0x4000; - *AR9_GPIO_P0_OD = *AR9_GPIO_P0_OD | 0x4000; - for(j=0;j<5;j++) { - *AR9_GPIO_P0_OUT = *AR9_GPIO_P0_OUT & ~0x4000; - for(i=0;i<0x10000;i++); - *AR9_GPIO_P0_OUT = *AR9_GPIO_P0_OUT | 0x4000; - for(i=0;i<0x10000;i++); - } - *AR9_GPIO_P0_DIR = *AR9_GPIO_P0_DIR & ~0x4000; - *AR9_GPIO_P1_DIR = *AR9_GPIO_P1_DIR & ~0x8; -#endif -} - -static u16 ar9_smi_reg_read(u16 reg) -{ - int i; - while(REG32(AR9_SW_MDIO_CTL) & 0x8000); - REG32(AR9_SW_MDIO_CTL) = 0x8000| 0x2<<10 | ((u32) (reg&0x3ff)) ; /*0x10=MDIO_OP_READ*/ - for(i=0;i<0x3fff;i++); - udelay(50); - while(REG32(AR9_SW_MDIO_CTL) & 0x8000); - return((u16) (REG32(AR9_SW_MDIO_DATA))); -} - -static u16 ar9_smi_reg_write(u16 reg, u16 data) -{ - int i; - while(REG32(AR9_SW_MDIO_CTL) & 0x8000); - REG32(AR9_SW_MDIO_CTL) = 0x8000| (((u32) data)<<16) | 0x01<<10 | ((u32) (reg&0x3ff)) ; /*0x01=MDIO_OP_WRITE*/ - for(i=0;i<0x3fff;i++); - udelay(50); - return 0; -} - -static void ar9_sw_chip_init(u8 port, u8 mode) -{ - int i; - u16 chipid; - - debug("\nsearching for switches ... "); - - asm("sync"); - pci_reset(); - - /* 25mhz clock out */ - *AR9_CGU_IFCCR &= ~(3<<10); - *AR9_GPIO_P0_ALTSEL0 = *AR9_GPIO_P0_ALTSEL0 | (1<<3); - *AR9_GPIO_P0_ALTSEL1 = *AR9_GPIO_P0_ALTSEL1 & ~(1<<3); - *AR9_GPIO_P0_DIR = *AR9_GPIO_P0_DIR | (1<<3); - *AR9_GPIO_P0_OD = *AR9_GPIO_P0_OD | (1<<3); - *AR9_GPIO_P2_ALTSEL0 = *AR9_GPIO_P2_ALTSEL0 & ~(1<<0); - *AR9_GPIO_P2_ALTSEL1 = *AR9_GPIO_P2_ALTSEL1 & ~(1<<0); - *AR9_GPIO_P2_DIR = *AR9_GPIO_P2_DIR | (1<<0); - *AR9_GPIO_P2_OD = *AR9_GPIO_P2_OD | (1<<0); - - *AR9_PMU_PWDCR = (*AR9_PMU_PWDCR & 0xFFFBDFDF) ; - *AR9_PMU_PWDCR = (*AR9_PMU_PWDCR & ~(AR9_PMU_DMA | AR9_PMU_SWITCH)); - *AR9_PMU_PWDCR = (*AR9_PMU_PWDCR | AR9_PMU_USB0 | AR9_PMU_USB0_P); - - *AR9_GPIO_P2_OUT &= ~(1<<0); - asm("sync"); - - ar9_configure_sw_port(port, mode); - ar9_enable_sw_port(port, mode); - REG32(AR9_SW_P0_CTL) |= 0x400000; /* disable mdio polling for tantos */ - asm("sync"); - - /*GPIO 55(P3.7) used as output, set high*/ - *AR9_GPIO_P3_OD |=(1<<7); - *AR9_GPIO_P3_DIR |= (1<<7); - *AR9_GPIO_P3_ALTSEL0 &=~(1<<7); - *AR9_GPIO_P3_ALTSEL1 &=~(1<<7); - asm("sync"); - udelay(10); - - *AR9_GPIO_P3_OUT &= ~(1<<7); - for(i=0;i<1000;i++) - udelay(110); - *AR9_GPIO_P3_OUT |=(1<<7); - udelay(100); - - if(port==0) - REG32(AR9_SW_P0_CTL) |= 0x40001; - else - REG32(AR9_SW_P1_CTL) |= 0x40001; - - REG32(AR9_SW_P2_CTL) |= 0x40001; - REG32(AR9_SW_PMAC_HD_CTL) |= 0x40000; /* enable CRC */ - - *AR9_GPIO_P2_ALTSEL0 = *AR9_GPIO_P2_ALTSEL0 | (0xc00); - *AR9_GPIO_P2_ALTSEL1 = *AR9_GPIO_P2_ALTSEL1 & ~(0xc00); - *AR9_GPIO_P2_DIR = *AR9_GPIO_P2_DIR | 0xc00; - *AR9_GPIO_P2_OD = *AR9_GPIO_P2_OD | 0xc00; - - asm("sync"); - chipid = (unsigned short)(ar9_smi_reg_read(0x101)); - printf("\nswitch chip id=%08x\n",chipid); - if (chipid != ID_TANTOS) { - debug("whatever detected\n"); - ar9_smi_reg_write(0x1,0x840f); - ar9_smi_reg_write(0x3,0x840f); - ar9_smi_reg_write(0x5,0x840f); - ar9_smi_reg_write(0x7,0x840f); - ar9_smi_reg_write(0x8,0x840f); - ar9_smi_reg_write(0x12,0x3602); -#ifdef CLK_OUT2_25MHZ - ar9_smi_reg_write(0x33,0x4000); -#endif - } else { // Tantos switch ship - debug("Tantos switch detected\n"); - ar9_smi_reg_write(0xa1,0x0004); /*port 5 force link up*/ - ar9_smi_reg_write(0xc1,0x0004); /*port 6 force link up*/ - ar9_smi_reg_write(0xf5,0x0BBB); /*port 4 duplex mode, flow control enable,1000Mbit/s*/ - /*port 5 duplex mode, flow control enable, 1000Mbit/s*/ - /*port 6 duplex mode, flow control enable, 1000Mbit/s*/ - } - asm("sync"); - - /*reset GPHY*/ - mdelay(200); - *AR9_RCU_RST_REQ |= (AR9_RCU_RST_REQ_DMA | AR9_RCU_RST_REQ_PPE) ; - udelay(50); - *AR9_GPIO_P2_OUT |= (1<<0); -} - -static void ar9_dma_init(void) -{ - /* select port */ - *AR9_DMA_PS = 0; - - /* - TXWGT 14:12 rw Port Weight for Transmit Direction (the default value “001”) - - TXENDI 11:10 rw Endianness for Transmit Direction - Determine a byte swap between memory interface (left hand side) and - peripheral interface (right hand side). - 00B B0_B1_B2_B3 No byte switching - 01B B1_B0_B3_B2 B0B1B2B3 => B1B0B3B2 - 10B B2_B3_B0_B1 B0B1B2B3 => B2B3B0B1 - - RXENDI 9:8 rw Endianness for Receive Direction - Determine a byte swap between peripheral (left hand side) and memory - interface (right hand side). - 00B B0_B1_B2_B3 No byte switching - 01B B1_B0_B3_B2 B0B1B2B3 => B1B0B3B2 - 10B B2_B3_B0_B1 B0B1B2B3 => B2B3B0B1 - 11B B3_B2_B1_B0 B0B1B2B3 => B3B2B1B0 - - TXBL 5:4 rw Burst Length for Transmit Direction - Selects burst length for TX direction. - Others are reserved and will result in 2_WORDS burst length. - 01B 2_WORDS 2 words - 10B 4_WORDS 4 words - 11B 8_WORDS 8 words - - RXBL 3:2 rw Burst Length for Receive Direction - Selects burst length for RX direction. - Others are reserved and will result in 2_WORDS burst length. - 01B 2_WORDS 2 words - 10B 4_WORDS 4 words - 11B 8_WORDS 8 words - */ - *AR9_DMA_PCTRL = 0x1f28; -} - -#ifdef CONFIG_EXTRA_SWITCH -static int external_switch_init(void) -{ - ar9_sw_chip_init(0, RGMII_MODE); - - ar9_dma_init(); - - return 0; -} -#endif /* CONFIG_EXTRA_SWITCH */ - -#if defined(CONFIG_CMD_HTTPD) -int do_http_upgrade(const unsigned char *data, const ulong size) -{ - char buf[128]; - - if(getenv ("ram_addr") == NULL) - return -1; - if(getenv ("kernel_addr") == NULL) - return -1; - /* check the image */ - if(run_command("imi ${ram_addr}", 0) < 0) { - return -1; - } - /* write the image to the flash */ - puts("http ugrade ...\n"); - sprintf(buf, "era ${kernel_addr} +0x%x; cp.b ${ram_addr} ${kernel_addr} 0x%x", size, size); - return run_command(buf, 0); -} - -int do_http_progress(const int state) -{ - /* toggle LED's here */ - switch(state) { - case HTTP_PROGRESS_START: - puts("http start\n"); - break; - case HTTP_PROGRESS_TIMEOUT: - puts("."); - break; - case HTTP_PROGRESS_UPLOAD_READY: - puts("http upload ready\n"); - break; - case HTTP_PROGRESS_UGRADE_READY: - puts("http ugrade ready\n"); - break; - case HTTP_PROGRESS_UGRADE_FAILED: - puts("http ugrade failed\n"); - break; - } - return 0; -} - -unsigned long do_http_tmp_address(void) -{ - char *s = getenv ("ram_addr"); - if (s) { - ulong tmp = simple_strtoul (s, NULL, 16); - return tmp; - } - return 0 /*0x80a00000*/; -} - -#endif |