diff options
Diffstat (limited to 'package/uboot-lantiq/files/include/configs')
-rw-r--r-- | package/uboot-lantiq/files/include/configs/easy50812.h | 104 |
1 files changed, 104 insertions, 0 deletions
diff --git a/package/uboot-lantiq/files/include/configs/easy50812.h b/package/uboot-lantiq/files/include/configs/easy50812.h new file mode 100644 index 0000000..c7e96c1 --- /dev/null +++ b/package/uboot-lantiq/files/include/configs/easy50812.h @@ -0,0 +1,104 @@ +/* + * (C) Copyright 2003-2005 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * This file contains the configuration parameters for the Danube reference board. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* #define DEBUG */ + +#define CONFIG_MIPS32 1 /* MIPS32 CPU compatible */ +#define CONFIG_MIPS34KC 1 /* MIPS 34Kc CPU core */ +#define CONFIG_AR9 1 /* an AR9 device */ +#define CONFIG_EASY50812 1 /* on the AR9 reference board */ +#define CONFIG_SYS_MAX_RAM 32*1024*1024 /* 32 MB */ +#define CONFIG_FLASH_CFI_DRIVER 1 /* using CFI flash driver */ + +#define CONFIG_SYS_INIT_RAM_LOCK_MIPS + +/* use PPL1 and fixed values for CPU / DDR and bus speed */ +#define CONFIG_USE_PLL1 +#define CONFIG_CPU_333M_RAM_166M +#define CONFIG_CLASS_II_DDR_PAD + +#ifdef CONFIG_SYS_RAMBOOT + #define CONFIG_SKIP_LOWLEVEL_INIT /* no cache */ +#else + #define CONFIG_SYS_EBU_BOOT + #define INFINEON_EBU_BOOTCFG 0x688C688C /* CMULT = 8 for 150 MHz */ +#endif + +#ifndef CPU_CLOCK_RATE +#define CPU_CLOCK_RATE (ifx_get_cpuclk()) +#endif + +#define CONFIG_SYS_PROMPT "AR9 => " /* Monitor Command Prompt */ +#undef CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ + +/* + * Include common defines/options for all Lantiq boards + */ +#include "ifx-common.h" + +/* + * Cache Configuration (cpu/chip specific, ar9) + */ +#define CONFIG_SYS_DCACHE_SIZE (16384) +#define CONFIG_SYS_ICACHE_SIZE (16384) +#define CONFIG_SYS_CACHELINE_SIZE (32) +#define CONFIG_SYS_MIPS_CACHE_OPER_MODE CONF_CM_CACHABLE_NO_WA + +#define CONFIG_NET_MULTI +#if 0 +#define CONFIG_M4530_ETH +#define CONFIG_M4530_FPGA +#endif + +#define CONFIG_IFX_ETOP /* lantiq ethernet cpe interface */ +#define CLK_OUT2_25MHZ +#define CONFIG_EXTRA_SWITCH /* search for external switches like tantos */ +#define CONFIG_RMII /* use interface in RMII mode */ +#define CONFIG_MII +#define CONFIG_CMD_MII /* enable MII command */ + +#define CONFIG_IFX_ASC /* use lantiq ASC driver */ +#ifdef CONFIG_USE_ASC0 +#define CONFIG_SYS_IFX_ASC_BASE 0x1E100400 +#else +#define CONFIG_SYS_IFX_ASC_BASE 0x1E100C00 +#endif + +#ifdef CONFIG_SYS_RAMBOOT +/* Configuration of EBU: */ +/* starting address from 0xb0000000 */ +/* make the flash available from RAM boot */ +# define CONFIG_EBU_ADDSEL0 0x10000031 +# define CONFIG_EBU_BUSCON0 0x0001D7FF +#endif + +#define CONFIG_CMD_HTTPD /* enable upgrade via HTTPD */ + +#endif /* __CONFIG_H */ |