diff options
Diffstat (limited to 'package/unvram/files/nvram.init')
-rwxr-xr-x | package/unvram/files/nvram.init | 75 |
1 files changed, 0 insertions, 75 deletions
diff --git a/package/unvram/files/nvram.init b/package/unvram/files/nvram.init deleted file mode 100755 index 001b294..0000000 --- a/package/unvram/files/nvram.init +++ /dev/null @@ -1,75 +0,0 @@ -#!/bin/sh /etc/rc.common -# NVRAM setup -# -# This file handles the NVRAM quirks of various hardware. - -START=02 -alias debug=${DEBUG:-:} - -nvram_default() { - [ -z "$(nvram get $1)" ] && nvram set "$1=$2" -} - -nvram_set() { # for the linksys fixup part - [ "$(nvram get "$1")" = "$2" -a "$2" != "" ] || { - COMMIT=1 - /usr/sbin/nvram set "$1=$2" - } -} - -fixup_linksys() { - # work around braindead CFE defaults in linksys routers - boardtype=$(nvram get boardtype) - boardnum=$(nvram get boardnum) - boardflags=$(($(nvram get boardflags))) - adm_switch="$(( ($boardflags & 0x80) >> 7 ))" - - [ -n "$(nvram get vxkilled)" ] && boardtype=0 # don't mess with the ram settings on the hacked cfe - case "$(( $boardtype ))" in - "1800") #0x708 - if [ "$adm_switch" = 0 ]; then - nvram_set sdram_init "$(printf 0x%04x $(( $(/usr/sbin/nvram get sdram_init) | 0x0100 )))" - [ "$COMMIT" = 1 ] && { - nvram_set clkfreq 216 - nvram_set sdram_ncdl 0x0 - nvram_set pa0itssit 62 - nvram_set pa0b0 0x15eb - nvram_set pa0b1 0xfa82 - nvram_set pa0b2 0xfe66 - nvram_set pa0maxpwr 0x4e - } - fi - ;; - "1127") #0x467 - nvram_set sdram_init "$(printf 0x%04x $(( $(/usr/sbin/nvram get sdram_init) | 0x0100 )))" - [ "$COMMIT" = 1 ] && { - nvram_set sdram_ncdl 0x0 - nvram_set pa0itssit 62 - nvram_set pa0b0 0x168b - nvram_set pa0b1 0xfabf - nvram_set pa0b2 0xfeaf - nvram_set pa0maxpwr 0x4e - } - ;; - "1071") #0x042f - nvram_set sdram_init "$(printf 0x%04x $(( $(/usr/sbin/nvram get sdram_init) | 0x0009 )))" - [ "$COMMIT" = 1 ] && { - nvram_set sdram_ncdl 0x0 - } - esac -} - -start() { - fixup_linksys - - # OFDM Power Offset is set incorrectly on many boards. - # Setting it to 0 will increase the tx power to normal levels. - nvram_set opo 0x0 - - [ "$(nvram get il0macaddr)" = "00:90:4c:5f:00:2a" ] && { - # if default wifi mac, set two higher than the lan mac - nvram set il0macaddr=$(nvram get et0macaddr| - awk '{OFS=FS=":";for(x=7,y=2;--x;){$x=sprintf("%02x",(y+="0x"$x)%256);y/=256}print}') - } - [ "$COMMIT" = "1" ] && nvram commit -} |