diff options
Diffstat (limited to 'package/wpa_supplicant/config')
| -rw-r--r-- | package/wpa_supplicant/config | 54 |
1 files changed, 37 insertions, 17 deletions
diff --git a/package/wpa_supplicant/config b/package/wpa_supplicant/config index 8a2b0b0..b14aa34 100644 --- a/package/wpa_supplicant/config +++ b/package/wpa_supplicant/config @@ -41,7 +41,7 @@ # Driver interface for Host AP driver -# CONFIG_DRIVER_HOSTAP=y +#CONFIG_DRIVER_HOSTAP=y # Driver interface for Agere driver #CONFIG_DRIVER_HERMES=y @@ -51,8 +51,8 @@ # Driver interface for madwifi driver CONFIG_DRIVER_MADWIFI=y -# Change include directories to match with the local setup -#CFLAGS += -I../madwifi/wpa +# Set include directory to the madwifi source tree +#CFLAGS += -I../../madwifi # Driver interface for Prism54 driver # (Note: Prism54 is not yet supported, i.e., this will not work as-is and is @@ -65,7 +65,10 @@ CONFIG_DRIVER_MADWIFI=y # Driver interface for Atmel driver #CONFIG_DRIVER_ATMEL=y -# Driver interface for Broadcom driver +# Driver interface for old Broadcom driver +# Please note that the newer Broadcom driver ("hybrid Linux driver") supports +# Linux wireless extensions and does not need (or even work) with the old +# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver. #CONFIG_DRIVER_BROADCOM=y # Example path for wlioctl.h; change to match your configuration #CFLAGS += -I/opt/WRT54GS/release/src/include @@ -79,6 +82,9 @@ CONFIG_DRIVER_MADWIFI=y # Driver interface for generic Linux wireless extensions CONFIG_DRIVER_WEXT=y +# Driver interface for Linux drivers using the nl80211 kernel interface +CONFIG_DRIVER_NL80211=y + # Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) #CONFIG_DRIVER_BSD=y #CFLAGS += -I/usr/local/include @@ -106,6 +112,9 @@ CONFIG_DRIVER_WEXT=y # Driver interface for wired Ethernet drivers CONFIG_DRIVER_WIRED=y +# Driver interface for the Broadcom RoboSwitch family +#CONFIG_DRIVER_ROBOSWITCH=y + # Enable IEEE 802.1X Supplicant (automatically included if any EAP method is # included) CONFIG_IEEE8021X_EAPOL=y @@ -153,6 +162,13 @@ CONFIG_EAP_LEAP=y # EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used) #CONFIG_EAP_AKA=y +# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used). +# This requires CONFIG_EAP_AKA to be enabled, too. +#CONFIG_EAP_AKA_PRIME=y + +# Enable USIM simulator (Milenage) for EAP-AKA +#CONFIG_USIM_SIMULATOR=y + # EAP-SAKE #CONFIG_EAP_SAKE=y @@ -164,6 +180,9 @@ CONFIG_EAP_LEAP=y # EAP-TNC and related Trusted Network Connect support (experimental) #CONFIG_EAP_TNC=y +# Wi-Fi Protected Setup (WPS) +#CONFIG_WPS=y + # EAP-IKEv2 #CONFIG_EAP_IKEV2=y @@ -307,6 +326,10 @@ CONFIG_INTERNAL_LIBTOMMATH=y #LIBS += -L$(LTM_PATH) #LIBS_p += -L$(LTM_PATH) #endif +# At the cost of about 4 kB of additional binary size, the internal LibTomMath +# can be configured to include faster routines for exptmod, sqr, and div to +# speed up DH and RSA calculation considerably +#CONFIG_INTERNAL_LIBTOMMATH_FAST=y # Include NDIS event processing through WMI into wpa_supplicant/wpasvc. # This is only for Windows builds and requires WMI-related header files and @@ -339,20 +362,13 @@ CONFIG_INTERNAL_LIBTOMMATH=y #CONFIG_DYNAMIC_EAP_METHODS=y # Include client MLME (management frame processing). -# This can be used to move MLME processing of Devicescape IEEE 802.11 stack -# into user space. +# This can be used to move MLME processing of Linux mac80211 stack into user +# space. Please note that this is currently only available with +# driver_nl80211.c and only with a modified version of Linux kernel and +# wpa_supplicant. #CONFIG_CLIENT_MLME=y -# Currently, driver_devicescape.c build requires some additional parameters -# to be able to include some of the kernel header files. Following lines can -# be used to set these (WIRELESS_DEV must point to the root directory of the -# wireless-dev.git tree). -#WIRELESS_DEV=/usr/src/wireless-dev -#CFLAGS += -I$(WIRELESS_DEV)/net/mac80211 - -# IEEE 802.11r/D4.1 (Fast BSS Transition) -# This enables an experimental implementation of a draft version of -# IEEE 802.11r. This draft is still subject to change, so it should be noted -# that this version may not comply with the final standard. + +# IEEE Std 802.11r-2008 (Fast BSS Transition) #CONFIG_IEEE80211R=y # Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt) @@ -360,3 +376,7 @@ CONFIG_DEBUG_FILE=y # Enable privilege separation (see README 'Privilege separation' for details) #CONFIG_PRIVSEP=y + +# Enable mitigation against certain attacks against TKIP by delaying Michael +# MIC error reports by a random amount of time between 0 and 60 seconds +#CONFIG_DELAYED_MIC_ERROR_REPORT=y |