diff options
Diffstat (limited to 'package')
33 files changed, 5903 insertions, 0 deletions
diff --git a/package/uboot-lantiq/Makefile b/package/uboot-lantiq/Makefile new file mode 100644 index 0000000..fb9b668 --- /dev/null +++ b/package/uboot-lantiq/Makefile @@ -0,0 +1,82 @@ +# +# Copyright (C) 2010 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +include $(TOPDIR)/rules.mk +include $(INCLUDE_DIR)/kernel.mk + +PKG_NAME:=u-boot +PKG_VERSION:=2009.11.1 +PKG_MD5SUM:=6086421c9e2f3a0d0dbc5f706b551dbc +PKG_RELEASE:=1 + +PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION) +PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2 +PKG_SOURCE_URL:=ftp://ftp.denx.de/pub/u-boot +PKG_TARGETS:=bin + +include $(INCLUDE_DIR)/package.mk + +define Package/uboot-lantiq + SECTION:=boot + CATEGORY:=Boot Loaders + DEPENDS:=@TARGET_ifxmips + TITLE:=U-Boot for Lantiq reference boards + URL:=http://www.denx.de/wiki/UBoot/WebHome +endef + +define Build/Prepare + $(PKG_UNPACK) + cp -r $(CP_OPTS) $(FILES_DIR)/* $(PKG_BUILD_DIR)/ + $(Build/Patch) + find $(PKG_BUILD_DIR) -name .svn | $(XARGS) rm -rf +endef + +UBOOT_CONFIG:=easy50712_DDR166M +UBOOT_MAKE_OPTS:= \ + CROSS_COMPILE=$(TARGET_CROSS) \ + ENDIANNESS= \ + V=1 + +define Build/Configure/Target + $(MAKE) -s -C $(PKG_BUILD_DIR) \ + $(UBOOT_MAKE_OPTS) \ + O=$(PKG_BUILD_DIR)/$(1) \ + $(1)_config +endef + +define Build/Configure + $(call Build/Configure/Target,$(UBOOT_CONFIG)) + $(call Build/Configure/Target,$(UBOOT_CONFIG)_ramboot) +endef + +define Build/Compile/Target + $(MAKE) -s -C $(PKG_BUILD_DIR) \ + $(UBOOT_MAKE_OPTS) \ + O=$(PKG_BUILD_DIR)/$(1) \ + all +endef + +define Build/Compile + $(call Build/Compile/Target,$(UBOOT_CONFIG)) + $(call Build/Compile/Target,$(UBOOT_CONFIG)_ramboot) +endef + +define Package/uboot-lantiq/install + mkdir -p $(1)/$(UBOOT_CONFIG) + dd \ + if=$(PKG_BUILD_DIR)/$(UBOOT_CONFIG)/u-boot.bin \ + of=$(1)/$(UBOOT_CONFIG)/u-boot.bin \ + bs=64k conv=sync + if [ -e $(UBOOT_CONFIG).conf ]; then \ + perl ./gct \ + $(UBOOT_CONFIG).conf \ + $(PKG_BUILD_DIR)/$(UBOOT_CONFIG)_ramboot/u-boot.srec \ + $(1)/$(UBOOT_CONFIG)/u-boot.asc; \ + fi +endef + +$(eval $(call BuildPackage,uboot-lantiq)) diff --git a/package/uboot-lantiq/easy50712_DDR166M.conf b/package/uboot-lantiq/easy50712_DDR166M.conf new file mode 100644 index 0000000..351d6a1 --- /dev/null +++ b/package/uboot-lantiq/easy50712_DDR166M.conf @@ -0,0 +1,134 @@ + 0xbf800060 0x7 + 0xbf800010 0x0 + 0xbf800020 0x0 + 0xbf800200 0x02 + 0xbf800210 0x0 + +;REG32(MC_DC0) = 0x00001B1B; + 0xbf801000 0x1b1b +;REG32(MC_DC1) = 0x00000000; + 0xbf801010 0x0 +;REG32(MC_DC2) = 0x00000000; + 0xbf801020 0x0 +;REG32(MC_DC3) = 0x00000000; + 0xbf801030 0x0 +;REG32(MC_DC4) = 0x00000000; + 0xbf801040 0x0 +;REG32(MC_DC5) = 0x00000200; + 0xbf801050 0x200 +;REG32(MC_DC6) = 0x00000306; +; 0xbf801060 0x0306 + 0xbf801060 0x0605 +;REG32(MC_DC7) = 0x00000303; + 0xbf801070 0x302 +; 0xbf801070 0x0203 +;REG32(MC_DC8) = 0x00000102; + 0xbf801080 0x102 +;REG32(MC_DC9) = 0x0000070A; + 0xbf801090 0x70a +; 0xbf801090 0x608 +;REG32(MC_DC10) = 0x00000203; + 0xbf8010a0 0x203 +;REG32(MC_DC11) = 0x00000C02; + 0xbf8010b0 0xc02 +; 0xbf8010b0 0x0a02 +;REG32(MC_DC12) = 0x000001C8; + 0xbf8010c0 0x1c8 +;REG32(MC_DC13) = 0x00000001; + 0xbf8010d0 0x1 +;REG32(MC_DC14) = 0x00000000; + 0xbf8010e0 0x0 +;REG32(MC_DC15) = 0x00000F5F; +; 0xbf8010f0 0xf5f + 0xbf8010f0 0xf3c +;REG32(MC_DC16) = 0x0000C800; + 0xbf801100 0xc800 +;REG32(MC_DC17) = 0x0000000D; +; 0xbf801110 0xd + 0xbf801110 0xd +;REG32(MC_DC18) = 0x00000300; + 0xbf801120 0x300 +;REG32(MC_DC19) = 0x00000300; +; 0xbf801130 0x300 + 0xbf801130 0x200 +;REG32(MC_DC20) = 0x00000A04; +; 0xbf801140 0xa04 + 0xbf801140 0xa04 +;REG32(MC_DC21) = 0x00001c00; + 0xbf801150 0xd00 +; 0xbf801150 0x1f00 +;REG32(MC_DC22) = 0x00001E1E; + 0xbf801160 0xd0d +; 0xbf801160 0x1f1f +;REG32(MC_DC23) = 0x00000000; + 0xbf801170 0x0 +;//Disable ECC +;REG32(MC_DC24) = 0x0000007F; +; 0xbf801180 0x7f + 0xbf801180 0x062 +; 0xbf801180 0x37f +;REG32(MC_DC25) = 0x00000000; + 0xbf801190 0x0 +;REG32(MC_DC26) = 0x00000000; + 0xbf8011a0 0x0 +;REG32(MC_DC27) = 0x00000000; + 0xbf8011b0 0x0 +;REG32(MC_DC28) = 0x00000A24; +; 0xbf8011c0 0xa24 + 0xbf8011c0 0x510 +;REG32(MC_DC29) = 0x00002D89; + 0xbf8011d0 0x2d89 +; 0xbf8011d0 0x2d92 +;REG32(MC_DC30) = 0x00000022; + 0xbf8011e0 0x8300 +; 0xbf8011e0 0x8235 +;REG32(MC_DC31) = 0x00000000; + 0xbf8011f0 0x0 +;REG32(MC_DC32) = 0x00000000; + 0xbf801200 0x0 +;REG32(MC_DC33) = 0x00000000; + 0xbf801210 0x0 +;REG32(MC_DC34) = 0x00000000; + 0xbf801220 0x0 +;REG32(MC_DC35) = 0x00000000; + 0xbf801230 0x0 +;REG32(MC_DC36) = 0x00000000; + 0xbf801240 0x0 +;REG32(MC_DC37) = 0x00000000; + 0xbf801250 0x0 +;REG32(MC_DC38) = 0x00000000; + 0xbf801260 0x0 +;REG32(MC_DC39) = 0x00000000; + 0xbf801270 0x0 +;REG32(MC_DC40) = 0x00000000; + 0xbf801280 0x0 +;REG32(MC_DC41) = 0x00000000; + 0xbf801290 0x0 +;REG32(MC_DC42) = 0x00000000; + 0xbf8012a0 0x0 +;REG32(MC_DC43) = 0x00000000; + 0xbf8012b0 0x0 +;REG32(MC_DC44) = 0x00000000; + 0xbf8012c0 0x0 +;REG32(MC_DC45) = 0x00000600; + 0xbf8012d0 0x500 +;REG32(MC_DC46) = 0x00000000; + 0xbf8012e0 0x0 + + 0xbf800060 0x05 + 0xbf801030 0x100 + + + + + + + + + + + + + + + diff --git a/package/uboot-lantiq/files/board/infineon/easy50712/Makefile b/package/uboot-lantiq/files/board/infineon/easy50712/Makefile new file mode 100644 index 0000000..b57ff19 --- /dev/null +++ b/package/uboot-lantiq/files/board/infineon/easy50712/Makefile @@ -0,0 +1,47 @@ +# +# (C) Copyright 2003-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +#COBJS := $(BOARD).o +COBJS-y += danube.o + +SOBJS = lowlevel_init.o pmuenable.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/package/uboot-lantiq/files/board/infineon/easy50712/config.mk b/package/uboot-lantiq/files/board/infineon/easy50712/config.mk new file mode 100644 index 0000000..c0e5d82 --- /dev/null +++ b/package/uboot-lantiq/files/board/infineon/easy50712/config.mk @@ -0,0 +1,60 @@ +# +# (C) Copyright 2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# Danube board with MIPS 24Kc CPU core +# +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp + +ifdef CONFIG_LZMA_BOOTSTRAP + +ifdef BUILD_BOOTSTRAP + +$(info BUILD_BOOTSTRAP ) +#TEXT_BASE = 0xB0000000 +TEXT_BASE = 0x80010000 + +else # BUILD_BOOTSTRAP + +ifndef TEXT_BASE +$(info redefine TEXT_BASE = 0x80040000 ) +TEXT_BASE = 0x80040000 +endif + +endif # BUILD_BOOTSTRAP + +else + +ifdef BUILD_BOOTSTRAP +$(error BUILD_BOOTSTRAP but not enabled in config) +endif + +ifndef TEXT_BASE +## Standard: boot from ebu +$(info redefine TEXT_BASE = 0xB0000000 ) +TEXT_BASE = 0xB0000000 +## For testing: boot from RAM +# TEXT_BASE = 0x80100000 +endif + +endif # CONFIG_LZMA_BOOTSTRAP diff --git a/package/uboot-lantiq/files/board/infineon/easy50712/danube.c b/package/uboot-lantiq/files/board/infineon/easy50712/danube.c new file mode 100644 index 0000000..4734366 --- /dev/null +++ b/package/uboot-lantiq/files/board/infineon/easy50712/danube.c @@ -0,0 +1,338 @@ +/* + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2010 + * Thomas Langer, Ralph Hempel + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <netdev.h> +#include <miiphy.h> +#include <asm/addrspace.h> +#include <asm/danube.h> +#include <asm/reboot.h> +#include <asm/io.h> + +extern ulong ifx_get_ddr_hz(void); +extern ulong ifx_get_cpuclk(void); + +/* definitions for external PHYs / Switches */ +/* Split values into phy address and register address */ +#define PHYADDR(_reg) ((_reg >> 5) & 0xff), (_reg & 0x1f) + +/* IDs and registers of known external switches */ +#define ID_SAMURAI_0 0x1020 +#define ID_SAMURAI_1 0x0007 +#define SAMURAI_ID_REG0 0xA0 +#define SAMURAI_ID_REG1 0xA1 + +#define ID_TANTOS 0x2599 + +void _machine_restart(void) +{ + *DANUBE_RCU_RST_REQ |=1<<30; +} + +#ifdef CONFIG_SYS_RAMBOOT +phys_size_t initdram(int board_type) +{ + return get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM); +} +#elif defined(CONFIG_USE_DDR_RAM) +phys_size_t initdram(int board_type) +{ + return (CONFIG_SYS_MAX_RAM); +} +#else + +static ulong max_sdram_size(void) /* per Chip Select */ +{ + /* The only supported SDRAM data width is 16bit. + */ +#define CFG_DW 4 + + /* The only supported number of SDRAM banks is 4. + */ +#define CFG_NB 4 + + ulong cfgpb0 = *DANUBE_SDRAM_MC_CFGPB0; + int cols = cfgpb0 & 0xF; + int rows = (cfgpb0 & 0xF0) >> 4; + ulong size = (1 << (rows + cols)) * CFG_DW * CFG_NB; + + return size; +} + +/* + * Check memory range for valid RAM. A simple memory test determines + * the actually available RAM size between addresses `base' and + * `base + maxsize'. + */ + +static long int dram_size(long int *base, long int maxsize) +{ + volatile long int *addr; + ulong cnt, val; + ulong save[32]; /* to make test non-destructive */ + unsigned char i = 0; + + for (cnt = (maxsize / sizeof (long)) >> 1; cnt > 0; cnt >>= 1) { + addr = base + cnt; /* pointer arith! */ + + save[i++] = *addr; + *addr = ~cnt; + } + + /* write 0 to base address */ + addr = base; + save[i] = *addr; + *addr = 0; + + /* check at base address */ + if ((val = *addr) != 0) { + *addr = save[i]; + return (0); + } + + for (cnt = 1; cnt < maxsize / sizeof (long); cnt <<= 1) { + addr = base + cnt; /* pointer arith! */ + + val = *addr; + *addr = save[--i]; + + if (val != (~cnt)) { + return (cnt * sizeof (long)); + } + } + return (maxsize); +} + +phys_size_t initdram(int board_type) +{ + int rows, cols, best_val = *DANUBE_SDRAM_MC_CFGPB0; + ulong size, max_size = 0; + ulong our_address; + + /* load t9 into our_address */ + asm volatile ("move %0, $25" : "=r" (our_address) :); + + /* Can't probe for RAM size unless we are running from Flash. + * find out whether running from DRAM or Flash. + */ + if (CPHYSADDR(our_address) < CPHYSADDR(PHYS_FLASH_1)) + { + return max_sdram_size(); + } + + for (cols = 0x8; cols <= 0xC; cols++) + { + for (rows = 0xB; rows <= 0xD; rows++) + { + *DANUBE_SDRAM_MC_CFGPB0 = (0x14 << 8) | + (rows << 4) | cols; + size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, + max_sdram_size()); + + if (size > max_size) + { + best_val = *DANUBE_SDRAM_MC_CFGPB0; + max_size = size; + } + } + } + + *DANUBE_SDRAM_MC_CFGPB0 = best_val; + return max_size; +} +#endif + +int checkboard (void) +{ + unsigned long chipid = *DANUBE_MPS_CHIPID; + int part_num; + + puts ("Board: "); + + part_num = DANUBE_MPS_CHIPID_PARTNUM_GET(chipid); + switch (part_num) + { + case 0x129: + case 0x12D: + puts("Danube/Twinpass/Vinax-VE "); + break; + default: + printf ("unknown, chip part number 0x%03X ", part_num); + break; + } + printf ("V1.%ld, ", DANUBE_MPS_CHIPID_VERSION_GET(chipid)); + + printf("DDR Speed %ld MHz, ", ifx_get_ddr_hz()/1000000); + printf("CPU Speed %ld MHz\n", ifx_get_cpuclk()/1000000); + + return 0; +} + +#ifdef CONFIG_SKIP_LOWLEVEL_INIT +int board_early_init_f(void) +{ +#ifdef CONFIG_EBU_ADDSEL0 + (*DANUBE_EBU_ADDSEL0) = CONFIG_EBU_ADDSEL0; +#endif +#ifdef CONFIG_EBU_ADDSEL1 + (*DANUBE_EBU_ADDSEL1) = CONFIG_EBU_ADDSEL1; +#endif +#ifdef CONFIG_EBU_ADDSEL2 + (*DANUBE_EBU_ADDSEL2) = CONFIG_EBU_ADDSEL2; +#endif +#ifdef CONFIG_EBU_ADDSEL3 + (*DANUBE_EBU_ADDSEL3) = CONFIG_EBU_ADDSEL3; +#endif +#ifdef CONFIG_EBU_BUSCON0 + (*DANUBE_EBU_BUSCON0) = CONFIG_EBU_BUSCON0; +#endif +#ifdef CONFIG_EBU_BUSCON1 + (*DANUBE_EBU_BUSCON1) = CONFIG_EBU_BUSCON1; +#endif +#ifdef CONFIG_EBU_BUSCON2 + (*DANUBE_EBU_BUSCON2) = CONFIG_EBU_BUSCON2; +#endif +#ifdef CONFIG_EBU_BUSCON3 + (*DANUBE_EBU_BUSCON3) = CONFIG_EBU_BUSCON3; +#endif + + return 0; +} +#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ + +#ifdef CONFIG_EXTRA_SWITCH +static int external_switch_init(void) +{ + unsigned short chipid0=0xdead, chipid1=0xbeef; + static char * const name = "lq_cpe_eth"; + +#ifdef CLK_OUT2_25MHZ + *DANUBE_GPIO_P0_DIR=0x0000ae78; + *DANUBE_GPIO_P0_ALTSEL0=0x00008078; + //joelin for Mii-1 *DANUBE_GPIO_P0_ALTSEL1=0x80000080; + *DANUBE_GPIO_P0_ALTSEL1=0x80000000; //joelin for Mii-1 + *DANUBE_CGU_IFCCR=0x00400010; + *DANUBE_GPIO_P0_OD=0x0000ae78; +#endif + + /* earlier no valid response is available, at least on Twinpass & Tantos @ 111MHz, M4530 platform */ + udelay(100000); + + debug("\nsearching for Samurai switch ... "); + if ( (miiphy_read(name, PHYADDR(SAMURAI_ID_REG0), &chipid0)==0) && + (miiphy_read(name, PHYADDR(SAMURAI_ID_REG1), &chipid1)==0) ) { + if (((chipid0 & 0xFFF0) == ID_SAMURAI_0) && + ((chipid1 & 0x000F) == ID_SAMURAI_1)) { + debug("found"); + + /* enable "Crossover Auto Detect" + defaults */ + /* P0 */ + miiphy_write(name, PHYADDR(0x01), 0x840F); + /* P1 */ + miiphy_write(name, PHYADDR(0x03), 0x840F); + /* P2 */ + miiphy_write(name, PHYADDR(0x05), 0x840F); + /* P3 */ + miiphy_write(name, PHYADDR(0x07), 0x840F); + /* P4 */ + miiphy_write(name, PHYADDR(0x08), 0x840F); + /* P5 */ + miiphy_write(name, PHYADDR(0x09), 0x840F); + /* System Control 4: CPU on port 1 and other */ + miiphy_write(name, PHYADDR(0x12), 0x3602); + #ifdef CLK_OUT2_25MHZ + /* Bandwidth Control Enable Register: enable */ + miiphy_write(name, PHYADDR(0x33), 0x4000); + #endif + } + } + + debug("\nsearching for TANTOS switch ... "); + if (miiphy_read(name, PHYADDR(0x101), &chipid0) == 0) { + if (chipid0 == ID_TANTOS) { + debug("found"); + + /* P5 Basic Control: Force Link Up */ + miiphy_write(name, PHYADDR(0xA1), 0x0004); + /* P6 Basic Control: Force Link Up */ + miiphy_write(name, PHYADDR(0xC1), 0x0004); + /* RGMII/MII Port Control (P4/5/6) */ + miiphy_write(name, PHYADDR(0xF5), 0x0773); + + /* Software workaround. */ + /* PHY reset from P0 to P4. */ + + /* set data for indirect write */ + miiphy_write(name, PHYADDR(0x121), 0x8000); + + /* P0 */ + miiphy_write(name, PHYADDR(0x120), 0x0400); + udelay(1000); + /* P1 */ + miiphy_write(name, PHYADDR(0x120), 0x0420); + udelay(1000); + /* P2 */ + miiphy_write(name, PHYADDR(0x120), 0x0440); + udelay(1000); + /* P3 */ + miiphy_write(name, PHYADDR(0x120), 0x0460); + udelay(1000); + /* P4 */ + miiphy_write(name, PHYADDR(0x120), 0x0480); + udelay(1000); + } + } + debug("\n"); + + return 0; +} +#endif /* CONFIG_EXTRA_SWITCH */ + +int board_eth_init(bd_t *bis) +{ +#if defined(CONFIG_IFX_ETOP) + + *DANUBE_PMU_PWDCR &= 0xFFFFEFDF; + *DANUBE_PMU_PWDCR &=~(1<<DANUBE_PMU_DMA_SHIFT);/*enable DMA from PMU*/ + + if (lq_eth_initialize(bis)<0) + return -1; + + *DANUBE_RCU_RST_REQ |=1; + udelay(200000); + *DANUBE_RCU_RST_REQ &=(unsigned long)~1; + udelay(1000); + +#ifdef CONFIG_EXTRA_SWITCH + if (external_switch_init()<0) + return -1; +#endif /* CONFIG_EXTRA_SWITCH */ +#endif /* CONFIG_IFX_ETOP */ + + return 0; +} + diff --git a/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings.h b/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings.h new file mode 100644 index 0000000..3a4b135 --- /dev/null +++ b/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings.h @@ -0,0 +1,50 @@ +/* Settings for Denali DDR SDRAM controller */ +/* Optimise for Danube Eval Board DDR 167 Mhz - by Ng Aik Ann 29th April */ +#define MC_DC0_VALUE 0x1B1B +#define MC_DC1_VALUE 0x0 +#define MC_DC2_VALUE 0x0 +#define MC_DC3_VALUE 0x0 +#define MC_DC4_VALUE 0x0 +#define MC_DC5_VALUE 0x200 +#define MC_DC6_VALUE 0x605 +#define MC_DC7_VALUE 0x303 +#define MC_DC8_VALUE 0x102 +#define MC_DC9_VALUE 0x70a +#define MC_DC10_VALUE 0x203 +#define MC_DC11_VALUE 0xc02 +#define MC_DC12_VALUE 0x1C8 +#define MC_DC13_VALUE 0x1 +#define MC_DC14_VALUE 0x0 +#define MC_DC15_VALUE 0xf3c +#define MC_DC16_VALUE 0xC800 +#define MC_DC17_VALUE 0xd +#define MC_DC18_VALUE 0x300 +#define MC_DC19_VALUE 0x200 +#define MC_DC20_VALUE 0xA03 +#define MC_DC21_VALUE 0x1d00 +#define MC_DC22_VALUE 0x1d1d +#define MC_DC23_VALUE 0x0 +#define MC_DC24_VALUE 0x5e /* was 0x7f */ +#define MC_DC25_VALUE 0x0 +#define MC_DC26_VALUE 0x0 +#define MC_DC27_VALUE 0x0 +#define MC_DC28_VALUE 0x510 +#define MC_DC29_VALUE 0x2d89 +#define MC_DC30_VALUE 0x8300 +#define MC_DC31_VALUE 0x0 +#define MC_DC32_VALUE 0x0 +#define MC_DC33_VALUE 0x0 +#define MC_DC34_VALUE 0x0 +#define MC_DC35_VALUE 0x0 +#define MC_DC36_VALUE 0x0 +#define MC_DC37_VALUE 0x0 +#define MC_DC38_VALUE 0x0 +#define MC_DC39_VALUE 0x0 +#define MC_DC40_VALUE 0x0 +#define MC_DC41_VALUE 0x0 +#define MC_DC42_VALUE 0x0 +#define MC_DC43_VALUE 0x0 +#define MC_DC44_VALUE 0x0 +#define MC_DC45_VALUE 0x500 +//#define MC_DC45_VALUE 0x400 +#define MC_DC46_VALUE 0x0 diff --git a/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_PROMOSDDR400.h b/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_PROMOSDDR400.h new file mode 100644 index 0000000..54bb6c9 --- /dev/null +++ b/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_PROMOSDDR400.h @@ -0,0 +1,50 @@ +/* Settings for Denali DDR SDRAM controller */ +/* Optimise for Danube Ref Board DDR 166 Mhz - by Ng Aik Ann 29th April */ +#define MC_DC0_VALUE 0x1B1B +#define MC_DC1_VALUE 0x0 +#define MC_DC2_VALUE 0x0 +#define MC_DC3_VALUE 0x0 +#define MC_DC4_VALUE 0x0 +#define MC_DC5_VALUE 0x200 +#define MC_DC6_VALUE 0x605 +#define MC_DC7_VALUE 0x303 +#define MC_DC8_VALUE 0x102 +#define MC_DC9_VALUE 0x70a +#define MC_DC10_VALUE 0x203 +#define MC_DC11_VALUE 0xa02 +#define MC_DC12_VALUE 0x1C8 +#define MC_DC13_VALUE 0x0 +#define MC_DC14_VALUE 0x0 +#define MC_DC15_VALUE 0xf3c /* WDQS tuning for clk_wr*/ +#define MC_DC16_VALUE 0xC800 +#define MC_DC17_VALUE 0xd +#define MC_DC18_VALUE 0x300 +#define MC_DC19_VALUE 0x200 +#define MC_DC20_VALUE 0xA04 /* A04 for reference board, A03 for Eval board */ +#define MC_DC21_VALUE 0x1200 +#define MC_DC22_VALUE 0x1212 +#define MC_DC23_VALUE 0x0 +#define MC_DC24_VALUE 0x62 /* WDQS Tuning for DQS */ +#define MC_DC25_VALUE 0x0 +#define MC_DC26_VALUE 0x0 +#define MC_DC27_VALUE 0x0 +#define MC_DC28_VALUE 0x510 +#define MC_DC29_VALUE 0x4e20 +#define MC_DC30_VALUE 0x8300 +#define MC_DC31_VALUE 0x0 +#define MC_DC32_VALUE 0x0 +#define MC_DC33_VALUE 0x0 +#define MC_DC34_VALUE 0x0 +#define MC_DC35_VALUE 0x0 +#define MC_DC36_VALUE 0x0 +#define MC_DC37_VALUE 0x0 +#define MC_DC38_VALUE 0x0 +#define MC_DC39_VALUE 0x0 +#define MC_DC40_VALUE 0x0 +#define MC_DC41_VALUE 0x0 +#define MC_DC42_VALUE 0x0 +#define MC_DC43_VALUE 0x0 +#define MC_DC44_VALUE 0x0 +#define MC_DC45_VALUE 0x500 +//#define MC_DC45_VALUE 0x400 +#define MC_DC46_VALUE 0x0 diff --git a/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_Samsung_166.h b/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_Samsung_166.h new file mode 100644 index 0000000..7975c3e --- /dev/null +++ b/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_Samsung_166.h @@ -0,0 +1,51 @@ +/* Settings for Denali DDR SDRAM controller */ +/* Optimise for Samsung DDR K4H561638H Danube Ref Board DDR 166 Mhz - by Ng Aik Ann 27th Nov 2006 */ + +#define MC_DC0_VALUE 0x1B1B +#define MC_DC1_VALUE 0x0 +#define MC_DC2_VALUE 0x0 +#define MC_DC3_VALUE 0x0 +#define MC_DC4_VALUE 0x0 +#define MC_DC5_VALUE 0x200 +#define MC_DC6_VALUE 0x605 +#define MC_DC7_VALUE 0x303 +#define MC_DC8_VALUE 0x102 +#define MC_DC9_VALUE 0x70a +#define MC_DC10_VALUE 0x203 +#define MC_DC11_VALUE 0xc02 +#define MC_DC12_VALUE 0x1C8 +#define MC_DC13_VALUE 0x1 +#define MC_DC14_VALUE 0x0 +#define MC_DC15_VALUE 0x120 /* WDQS tuning for clk_wr*/ +#define MC_DC16_VALUE 0xC800 +#define MC_DC17_VALUE 0xd +#define MC_DC18_VALUE 0x301 +#define MC_DC19_VALUE 0x200 +#define MC_DC20_VALUE 0xA04 /* A04 for reference board, A03 for Eval board */ +#define MC_DC21_VALUE 0x1400 +#define MC_DC22_VALUE 0x1414 +#define MC_DC23_VALUE 0x0 +#define MC_DC24_VALUE 0x4e /* WDQS Tuning for DQS */ +#define MC_DC25_VALUE 0x0 +#define MC_DC26_VALUE 0x0 +#define MC_DC27_VALUE 0x0 +#define MC_DC28_VALUE 0x510 +#define MC_DC29_VALUE 0x2d93 +#define MC_DC30_VALUE 0x8235 +#define MC_DC31_VALUE 0x0 +#define MC_DC32_VALUE 0x0 +#define MC_DC33_VALUE 0x0 +#define MC_DC34_VALUE 0x0 +#define MC_DC35_VALUE 0x0 +#define MC_DC36_VALUE 0x0 +#define MC_DC37_VALUE 0x0 +#define MC_DC38_VALUE 0x0 +#define MC_DC39_VALUE 0x0 +#define MC_DC40_VALUE 0x0 +#define MC_DC41_VALUE 0x0 +#define MC_DC42_VALUE 0x0 +#define MC_DC43_VALUE 0x0 +#define MC_DC44_VALUE 0x0 +#define MC_DC45_VALUE 0x500 +//#define MC_DC45_VALUE 0x400 +#define MC_DC46_VALUE 0x0 diff --git a/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_e111.h b/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_e111.h new file mode 100644 index 0000000..b655ca2 --- /dev/null +++ b/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_e111.h @@ -0,0 +1,50 @@ +/* Settings for Denali DDR SDRAM controller */ +/* Optimise for Danube Eval Board DDR 167 Mhz - by Ng Aik Ann 29th April */ +#define MC_DC0_VALUE 0x1B1B +#define MC_DC1_VALUE 0x0 +#define MC_DC2_VALUE 0x0 +#define MC_DC3_VALUE 0x0 +#define MC_DC4_VALUE 0x0 +#define MC_DC5_VALUE 0x200 +#define MC_DC6_VALUE 0x605 +#define MC_DC7_VALUE 0x303 +#define MC_DC8_VALUE 0x102 +#define MC_DC9_VALUE 0x70a +#define MC_DC10_VALUE 0x203 +#define MC_DC11_VALUE 0xc02 +#define MC_DC12_VALUE 0x1C8 +#define MC_DC13_VALUE 0x1 +#define MC_DC14_VALUE 0x0 +#define MC_DC15_VALUE 0xf3c /* WDQS tuning for clk_wr*/ +#define MC_DC16_VALUE 0xC800 +#define MC_DC17_VALUE 0xd +#define MC_DC18_VALUE 0x300 +#define MC_DC19_VALUE 0x200 +#define MC_DC20_VALUE 0xA03 /* A04 for reference board, A03 for Eval board */ +#define MC_DC21_VALUE 0x1800 +#define MC_DC22_VALUE 0x1818 +#define MC_DC23_VALUE 0x0 +#define MC_DC24_VALUE 0x5e /* WDQS Tuning for DQS */ +#define MC_DC25_VALUE 0x0 +#define MC_DC26_VALUE 0x0 +#define MC_DC27_VALUE 0x0 +#define MC_DC28_VALUE 0x510 +#define MC_DC29_VALUE 0x2d89 +#define MC_DC30_VALUE 0x8300 +#define MC_DC31_VALUE 0x0 +#define MC_DC32_VALUE 0x0 +#define MC_DC33_VALUE 0x0 +#define MC_DC34_VALUE 0x0 +#define MC_DC35_VALUE 0x0 +#define MC_DC36_VALUE 0x0 +#define MC_DC37_VALUE 0x0 +#define MC_DC38_VALUE 0x0 +#define MC_DC39_VALUE 0x0 +#define MC_DC40_VALUE 0x0 +#define MC_DC41_VALUE 0x0 +#define MC_DC42_VALUE 0x0 +#define MC_DC43_VALUE 0x0 +#define MC_DC44_VALUE 0x0 +#define MC_DC45_VALUE 0x500 +//#define MC_DC45_VALUE 0x400 +#define MC_DC46_VALUE 0x0 diff --git a/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_e166.h b/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_e166.h new file mode 100644 index 0000000..b655ca2 --- /dev/null +++ b/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_e166.h @@ -0,0 +1,50 @@ +/* Settings for Denali DDR SDRAM controller */ +/* Optimise for Danube Eval Board DDR 167 Mhz - by Ng Aik Ann 29th April */ +#define MC_DC0_VALUE 0x1B1B +#define MC_DC1_VALUE 0x0 +#define MC_DC2_VALUE 0x0 +#define MC_DC3_VALUE 0x0 +#define MC_DC4_VALUE 0x0 +#define MC_DC5_VALUE 0x200 +#define MC_DC6_VALUE 0x605 +#define MC_DC7_VALUE 0x303 +#define MC_DC8_VALUE 0x102 +#define MC_DC9_VALUE 0x70a +#define MC_DC10_VALUE 0x203 +#define MC_DC11_VALUE 0xc02 +#define MC_DC12_VALUE 0x1C8 +#define MC_DC13_VALUE 0x1 +#define MC_DC14_VALUE 0x0 +#define MC_DC15_VALUE 0xf3c /* WDQS tuning for clk_wr*/ +#define MC_DC16_VALUE 0xC800 +#define MC_DC17_VALUE 0xd +#define MC_DC18_VALUE 0x300 +#define MC_DC19_VALUE 0x200 +#define MC_DC20_VALUE 0xA03 /* A04 for reference board, A03 for Eval board */ +#define MC_DC21_VALUE 0x1800 +#define MC_DC22_VALUE 0x1818 +#define MC_DC23_VALUE 0x0 +#define MC_DC24_VALUE 0x5e /* WDQS Tuning for DQS */ +#define MC_DC25_VALUE 0x0 +#define MC_DC26_VALUE 0x0 +#define MC_DC27_VALUE 0x0 +#define MC_DC28_VALUE 0x510 +#define MC_DC29_VALUE 0x2d89 +#define MC_DC30_VALUE 0x8300 +#define MC_DC31_VALUE 0x0 +#define MC_DC32_VALUE 0x0 +#define MC_DC33_VALUE 0x0 +#define MC_DC34_VALUE 0x0 +#define MC_DC35_VALUE 0x0 +#define MC_DC36_VALUE 0x0 +#define MC_DC37_VALUE 0x0 +#define MC_DC38_VALUE 0x0 +#define MC_DC39_VALUE 0x0 +#define MC_DC40_VALUE 0x0 +#define MC_DC41_VALUE 0x0 +#define MC_DC42_VALUE 0x0 +#define MC_DC43_VALUE 0x0 +#define MC_DC44_VALUE 0x0 +#define MC_DC45_VALUE 0x500 +//#define MC_DC45_VALUE 0x400 +#define MC_DC46_VALUE 0x0 diff --git a/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_psc_166.h b/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_psc_166.h new file mode 100644 index 0000000..445b7da --- /dev/null +++ b/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_psc_166.h @@ -0,0 +1,51 @@ +/* Settings for Denali DDR SDRAM controller */ +/* Optimise for PSC DDR A2S56D40CTP for Danube Ref Board DDR 166 Mhz - by Ng Aik Ann 27th Nov 2006 */ + +#define MC_DC0_VALUE 0x1B1B +#define MC_DC1_VALUE 0x0 +#define MC_DC2_VALUE 0x0 +#define MC_DC3_VALUE 0x0 +#define MC_DC4_VALUE 0x0 +#define MC_DC5_VALUE 0x200 +#define MC_DC6_VALUE 0x605 +#define MC_DC7_VALUE 0x303 +#define MC_DC8_VALUE 0x102 +#define MC_DC9_VALUE 0x70a +#define MC_DC10_VALUE 0x203 +#define MC_DC11_VALUE 0xc02 +#define MC_DC12_VALUE 0x1C8 +#define MC_DC13_VALUE 0x1 +#define MC_DC14_VALUE 0x0 +#define MC_DC15_VALUE 0x120 /* WDQS tuning for clk_wr*/ +#define MC_DC16_VALUE 0xC800 +#define MC_DC17_VALUE 0xd +#define MC_DC18_VALUE 0x301 +#define MC_DC19_VALUE 0x200 +#define MC_DC20_VALUE 0xA04 /* A04 for reference board, A03 for Eval board */ +#define MC_DC21_VALUE 0x1700 +#define MC_DC22_VALUE 0x1717 +#define MC_DC23_VALUE 0x0 +#define MC_DC24_VALUE 0x52 /* WDQS Tuning for DQS */ +#define MC_DC25_VALUE 0x0 +#define MC_DC26_VALUE 0x0 +#define MC_DC27_VALUE 0x0 +#define MC_DC28_VALUE 0x510 +#define MC_DC29_VALUE 0x4e20 +#define MC_DC30_VALUE 0x8235 +#define MC_DC31_VALUE 0x0 +#define MC_DC32_VALUE 0x0 +#define MC_DC33_VALUE 0x0 +#define MC_DC34_VALUE 0x0 +#define MC_DC35_VALUE 0x0 +#define MC_DC36_VALUE 0x0 +#define MC_DC37_VALUE 0x0 +#define MC_DC38_VALUE 0x0 +#define MC_DC39_VALUE 0x0 +#define MC_DC40_VALUE 0x0 +#define MC_DC41_VALUE 0x0 +#define MC_DC42_VALUE 0x0 +#define MC_DC43_VALUE 0x0 +#define MC_DC44_VALUE 0x0 +#define MC_DC45_VALUE 0x500 +//#define MC_DC45_VALUE 0x400 +#define MC_DC46_VALUE 0x0 diff --git a/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_r111.h b/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_r111.h new file mode 100644 index 0000000..fd15597 --- /dev/null +++ b/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_r111.h @@ -0,0 +1,50 @@ +/* Settings for Denali DDR SDRAM controller */ +/* Optimise for Danube Ref Board DDR 166 Mhz - by Ng Aik Ann 29th April */ +#define MC_DC0_VALUE 0x1B1B +#define MC_DC1_VALUE 0x0 +#define MC_DC2_VALUE 0x0 +#define MC_DC3_VALUE 0x0 +#define MC_DC4_VALUE 0x0 +#define MC_DC5_VALUE 0x200 +#define MC_DC6_VALUE 0x605 +#define MC_DC7_VALUE 0x303 +#define MC_DC8_VALUE 0x102 +#define MC_DC9_VALUE 0x70a +#define MC_DC10_VALUE 0x203 +#define MC_DC11_VALUE 0xc02 +#define MC_DC12_VALUE 0x1C8 +#define MC_DC13_VALUE 0x1 +#define MC_DC14_VALUE 0x0 +#define MC_DC15_VALUE 0xf3c /* WDQS tuning for clk_wr*/ +#define MC_DC16_VALUE 0xC800 +#define MC_DC17_VALUE 0xd +#define MC_DC18_VALUE 0x300 +#define MC_DC19_VALUE 0x200 +#define MC_DC20_VALUE 0xA04 /* A04 for reference board, A03 for Eval board */ +#define MC_DC21_VALUE 0x1200 +#define MC_DC22_VALUE 0x1212 +#define MC_DC23_VALUE 0x0 +#define MC_DC24_VALUE 0x5e /* WDQS Tuning for DQS */ +#define MC_DC25_VALUE 0x0 +#define MC_DC26_VALUE 0x0 +#define MC_DC27_VALUE 0x0 +#define MC_DC28_VALUE 0x510 +#define MC_DC29_VALUE 0x2d89 +#define MC_DC30_VALUE 0x8300 +#define MC_DC31_VALUE 0x0 +#define MC_DC32_VALUE 0x0 +#define MC_DC33_VALUE 0x0 +#define MC_DC34_VALUE 0x0 +#define MC_DC35_VALUE 0x0 +#define MC_DC36_VALUE 0x0 +#define MC_DC37_VALUE 0x0 +#define MC_DC38_VALUE 0x0 +#define MC_DC39_VALUE 0x0 +#define MC_DC40_VALUE 0x0 +#define MC_DC41_VALUE 0x0 +#define MC_DC42_VALUE 0x0 +#define MC_DC43_VALUE 0x0 +#define MC_DC44_VALUE 0x0 +#define MC_DC45_VALUE 0x500 +//#define MC_DC45_VALUE 0x400 +#define MC_DC46_VALUE 0x0 diff --git a/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_r166.h b/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_r166.h new file mode 100644 index 0000000..742d34f --- /dev/null +++ b/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_r166.h @@ -0,0 +1,50 @@ +/* Settings for Denali DDR SDRAM controller */ +/* Optimise for Danube Ref Board DDR 166 Mhz - by Ng Aik Ann 29th April */ +#define MC_DC0_VALUE 0x1B1B +#define MC_DC1_VALUE 0x0 +#define MC_DC2_VALUE 0x0 +#define MC_DC3_VALUE 0x0 +#define MC_DC4_VALUE 0x0 +#define MC_DC5_VALUE 0x200 +#define MC_DC6_VALUE 0x605 +#define MC_DC7_VALUE 0x303 +#define MC_DC8_VALUE 0x102 +#define MC_DC9_VALUE 0x70a +#define MC_DC10_VALUE 0x203 +#define MC_DC11_VALUE 0xc02 +#define MC_DC12_VALUE 0x1C8 +#define MC_DC13_VALUE 0x1 +#define MC_DC14_VALUE 0x0 +#define MC_DC15_VALUE 0xf3c /* WDQS tuning for clk_wr*/ +#define MC_DC16_VALUE 0xC800 +#define MC_DC17_VALUE 0xd +#define MC_DC18_VALUE 0x300 +#define MC_DC19_VALUE 0x200 +#define MC_DC20_VALUE 0xA04 /* A04 for reference board, A03 for Eval board */ +#define MC_DC21_VALUE 0xd00 +#define MC_DC22_VALUE 0xd0d +#define MC_DC23_VALUE 0x0 +#define MC_DC24_VALUE 0x62 /* WDQS Tuning for DQS */ +#define MC_DC25_VALUE 0x0 +#define MC_DC26_VALUE 0x0 +#define MC_DC27_VALUE 0x0 +#define MC_DC28_VALUE 0x510 +#define MC_DC29_VALUE 0x2d89 +#define MC_DC30_VALUE 0x8300 +#define MC_DC31_VALUE 0x0 +#define MC_DC32_VALUE 0x0 +#define MC_DC33_VALUE 0x0 +#define MC_DC34_VALUE 0x0 +#define MC_DC35_VALUE 0x0 +#define MC_DC36_VALUE 0x0 +#define MC_DC37_VALUE 0x0 +#define MC_DC38_VALUE 0x0 +#define MC_DC39_VALUE 0x0 +#define MC_DC40_VALUE 0x0 +#define MC_DC41_VALUE 0x0 +#define MC_DC42_VALUE 0x0 +#define MC_DC43_VALUE 0x0 +#define MC_DC44_VALUE 0x0 +#define MC_DC45_VALUE 0x500 +//#define MC_DC45_VALUE 0x400 +#define MC_DC46_VALUE 0x0 diff --git a/package/uboot-lantiq/files/board/infineon/easy50712/lowlevel_init.S b/package/uboot-lantiq/files/board/infineon/easy50712/lowlevel_init.S new file mode 100644 index 0000000..4dc179f --- /dev/null +++ b/package/uboot-lantiq/files/board/infineon/easy50712/lowlevel_init.S @@ -0,0 +1,613 @@ +/* + * Memory sub-system initialization code for Danube board. + * Andre Messerschmidt + * Copyright (c) 2005 Infineon Technologies AG + * + * Based on Inca-IP code + * Copyright (c) 2003 Wolfgang Denk <wd@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +/* History: + peng liu May 25, 2006, for PLL setting after reset, 05252006 + */ +#include <config.h> +#include <version.h> +#include <asm/regdef.h> + +#if defined(CONFIG_USE_DDR_RAM) + +#if defined(CONFIG_USE_DDR_RAM_CFG_111M) +#include "ddr_settings_r111.h" +#define DDR111 +#elif defined(CONFIG_USE_DDR_RAM_CFG_166M) +#include "ddr_settings_r166.h" +#define DDR166 +#elif defined(CONFIG_USE_DDR_RAM_CFG_e111M) +#include "ddr_settings_e111.h" +#define DDR111 +#elif defined(CONFIG_USE_DDR_RAM_CFG_e166M) +#include "ddr_settings_e166.h" +#define DDR166 +#elif defined(CONFIG_USE_DDR_RAM_CFG_promos400) +#include "ddr_settings_PROMOSDDR400.h" +#define DDR166 +#elif defined(CONFIG_USE_DDR_RAM_CFG_samsung166) +#include "ddr_settings_Samsung_166.h" +#define DDR166 +#elif defined(CONFIG_USE_DDR_RAM_CFG_psc166) +#include "ddr_settings_psc_166.h" +#define DDR166 +#else +#warning "missing definition for ddr_settings.h, use default!" +#include "ddr_settings.h" +#endif +#endif /* CONFIG_USE_DDR_RAM */ + +#if defined(CONFIG_USE_DDR_RAM) && !defined(MC_DC0_VALUE) +#error "missing include of ddr_settings.h" +#endif + +#define EBU_MODUL_BASE 0xBE105300 +#define EBU_CLC(value) 0x0000(value) +#define EBU_CON(value) 0x0010(value) +#define EBU_ADDSEL0(value) 0x0020(value) +#define EBU_ADDSEL1(value) 0x0024(value) +#define EBU_ADDSEL2(value) 0x0028(value) +#define EBU_ADDSEL3(value) 0x002C(value) +#define EBU_BUSCON0(value) 0x0060(value) +#define EBU_BUSCON1(value) 0x0064(value) +#define EBU_BUSCON2(value) 0x0068(value) +#define EBU_BUSCON3(value) 0x006C(value) + +#define MC_MODUL_BASE 0xBF800000 +#define MC_ERRCAUSE(value) 0x0010(value) +#define MC_ERRADDR(value) 0x0020(value) +#define MC_CON(value) 0x0060(value) + +#define MC_SRAM_ENABLE 0x00000004 +#define MC_SDRAM_ENABLE 0x00000002 +#define MC_DDRRAM_ENABLE 0x00000001 + +#define MC_SDR_MODUL_BASE 0xBF800200 +#define MC_IOGP(value) 0x0000(value) +#define MC_CTRLENA(value) 0x0010(value) +#define MC_MRSCODE(value) 0x0020(value) +#define MC_CFGDW(value) 0x0030(value) +#define MC_CFGPB0(value) 0x0040(value) +#define MC_LATENCY(value) 0x0080(value) +#define MC_TREFRESH(value) 0x0090(value) +#define MC_SELFRFSH(value) 0x00A0(value) + +#define MC_DDR_MODUL_BASE 0xBF801000 +#define MC_DC00(value) 0x0000(value) +#define MC_DC01(value) 0x0010(value) +#define MC_DC02(value) 0x0020(value) +#define MC_DC03(value) 0x0030(value) +#define MC_DC04(value) 0x0040(value) +#define MC_DC05(value) 0x0050(value) +#define MC_DC06(value) 0x0060(value) +#define MC_DC07(value) 0x0070(value) +#define MC_DC08(value) 0x0080(value) +#define MC_DC09(value) 0x0090(value) +#define MC_DC10(value) 0x00A0(value) +#define MC_DC11(value) 0x00B0(value) +#define MC_DC12(value) 0x00C0(value) +#define MC_DC13(value) 0x00D0(value) +#define MC_DC14(value) 0x00E0(value) +#define MC_DC15(value) 0x00F0(value) +#define MC_DC16(value) 0x0100(value) +#define MC_DC17(value) 0x0110(value) +#define MC_DC18(value) 0x0120(value) +#define MC_DC19(value) 0x0130(value) +#define MC_DC20(value) 0x0140(value) +#define MC_DC21(value) 0x0150(value) +#define MC_DC22(value) 0x0160(value) +#define MC_DC23(value) 0x0170(value) +#define MC_DC24(value) 0x0180(value) +#define MC_DC25(value) 0x0190(value) +#define MC_DC26(value) 0x01A0(value) +#define MC_DC27(value) 0x01B0(value) +#define MC_DC28(value) 0x01C0(value) +#define MC_DC29(value) 0x01D0(value) +#define MC_DC30(value) 0x01E0(value) +#define MC_DC31(value) 0x01F0(value) +#define MC_DC32(value) 0x0200(value) +#define MC_DC33(value) 0x0210(value) +#define MC_DC34(value) 0x0220(value) +#define MC_DC35(value) 0x0230(value) +#define MC_DC36(value) 0x0240(value) +#define MC_DC37(value) 0x0250(value) +#define MC_DC38(value) 0x0260(value) +#define MC_DC39(value) 0x0270(value) +#define MC_DC40(value) 0x0280(value) +#define MC_DC41(value) 0x0290(value) +#define MC_DC42(value) 0x02A0(value) +#define MC_DC43(value) 0x02B0(value) +#define MC_DC44(value) 0x02C0(value) +#define MC_DC45(value) 0x02D0(value) +#define MC_DC46(value) 0x02E0(value) + +#define RCU_OFFSET 0xBF203000 +#define RCU_RST_REQ (RCU_OFFSET + 0x0010) +#define RCU_STS (RCU_OFFSET + 0x0014) + +#define CGU_OFFSET 0xBF103000 +#define PLL0_CFG (CGU_OFFSET + 0x0004) +#define PLL1_CFG (CGU_OFFSET + 0x0008) +#define PLL2_CFG (CGU_OFFSET + 0x000C) +#define CGU_SYS (CGU_OFFSET + 0x0010) +#define CGU_UPDATE (CGU_OFFSET + 0x0014) +#define IF_CLK (CGU_OFFSET + 0x0018) +#define CGU_SMD (CGU_OFFSET + 0x0020) +#define CGU_CT1SR (CGU_OFFSET + 0x0028) +#define CGU_CT2SR (CGU_OFFSET + 0x002C) +#define CGU_PCMCR (CGU_OFFSET + 0x0030) +#define PCI_CR_PCI (CGU_OFFSET + 0x0034) +#define CGU_OSC_CTRL (CGU_OFFSET + 0x001C) +#define CGU_MIPS_PWR_DWN (CGU_OFFSET + 0x0038) +#define CLK_MEASURE (CGU_OFFSET + 0x003C) + +//05252006 +#define pll0_35MHz_CONFIG 0x9D861059 +#define pll1_35MHz_CONFIG 0x1A260CD9 +#define pll2_35MHz_CONFIG 0x8000f1e5 +#define pll0_36MHz_CONFIG 0x1000125D +#define pll1_36MHz_CONFIG 0x1B1E0C99 +#define pll2_36MHz_CONFIG 0x8002f2a1 +//05252006 + +//06063001-joelin disable the PCI CFRAME mask -start +/*CFRAME is an I/O signal, in the chip, the output CFRAME is selected via GPIO altsel pins, so if you select MII1 RXD1, the CFRAME will not come out. +But the CFRAME input still take the signal from the pad and not disabled when altsel choose other function. So when MII1_RXD1 is low from other device, the EBU interface will be disabled. + +The chip function in such a way that disable the CFRAME mask mean EBU not longer check CFRAME to be the device using the bus. +The side effect is the entire PCI block will see CFRAME low all the time meaning PCI cannot use the bus at all so no more PCI function. +*/ +#define PCI_CR_PR_OFFSET 0xBE105400 +#define PCI_CR_PCI_MOD_REG (PCI_CR_PR_OFFSET + 0x0030) +#define PCI_CONFIG_SPACE 0xB7000000 +#define CS_CFM (PCI_CONFIG_SPACE + 0x6C) +//06063001-joelin disable the PCI CFRAME mask -end + .set noreorder + + +/* + * void ebu_init(void) + */ + .globl ebu_init + .ent ebu_init +ebu_init: + +#if defined(CONFIG_EBU_ADDSEL0) || defined(CONFIG_EBU_ADDSEL1) || \ + defined(CONFIG_EBU_ADDSEL2) || defined(CONFIG_EBU_ADDSEL3) || \ + defined(CONFIG_EBU_BUSCON0) || defined(CONFIG_EBU_BUSCON1) || \ + defined(CONFIG_EBU_BUSCON2) || defined(CONFIG_EBU_BUSCON3) + + li t1, EBU_MODUL_BASE +#if defined(CONFIG_EBU_ADDSEL0) + li t2, CONFIG_EBU_ADDSEL0 + sw t2, EBU_ADDSEL0(t1) +#endif +#if defined(CONFIG_EBU_ADDSEL1) + li t2, CONFIG_EBU_ADDSEL1 + sw t2, EBU_ADDSEL1(t1) +#endif +#if defined(CONFIG_EBU_ADDSEL2) + li t2, CONFIG_EBU_ADDSEL2 + sw t2, EBU_ADDSEL2(t1) +#endif +#if defined(CONFIG_EBU_ADDSEL3) + li t2, CONFIG_EBU_ADDSEL3 + sw t2, EBU_ADDSEL3(t1) +#endif + +#if defined(CONFIG_EBU_BUSCON0) + li t2, CONFIG_EBU_BUSCON0 + sw t2, EBU_BUSCON0(t1) +#endif +#if defined(CONFIG_EBU_BUSCON1) + li t2, CONFIG_EBU_BUSCON1 + sw t2, EBU_BUSCON1(t1) +#endif +#if defined(CONFIG_EBU_BUSCON2) + li t2, CONFIG_EBU_BUSCON2 + sw t2, EBU_BUSCON2(t1) +#endif +#if defined(CONFIG_EBU_BUSCON3) + li t2, CONFIG_EBU_BUSCON3 + sw t2, EBU_BUSCON3(t1) +#endif + +#endif + + j ra + nop + + .end ebu_init + + +/* + * void cgu_init(long) + * + * a0 has the clock value + */ + .globl cgu_init + .ent cgu_init +cgu_init: + li t2, CGU_SYS + lw t2,0(t2) + beq t2,a0,freq_up2date + nop + + li t2, RCU_STS + lw t2, 0(t2) + and t2,0x00020000 + beq t2,0x00020000,boot_36MHZ + nop +//05252006 + li t1, PLL0_CFG + li t2, pll0_35MHz_CONFIG + sw t2,0(t1) + li t1, PLL1_CFG + li t2, pll1_35MHz_CONFIG + sw t2,0(t1) + li t1, PLL2_CFG + li t2, pll2_35MHz_CONFIG + sw t2,0(t1) + li t1, CGU_SYS + sw a0,0(t1) + li t1, RCU_RST_REQ + li t2, 0x40000008 + sw t2,0(t1) + b wait_reset + nop +boot_36MHZ: + li t1, PLL0_CFG + li t2, pll0_36MHz_CONFIG + sw t2,0(t1) + li t1, PLL1_CFG + li t2, pll1_36MHz_CONFIG + sw t2,0(t1) + li t1, PLL2_CFG + li t2, pll2_36MHz_CONFIG + sw t2,0(t1) + li t1, CGU_SYS + sw a0,0(t1) + li t1, RCU_RST_REQ + li t2, 0x40000008 + sw t2,0(t1) +//05252006 + +wait_reset: + b wait_reset + nop +freq_up2date: + j ra + nop + + .end cgu_init + +#ifndef CONFIG_USE_DDR_RAM +/* + * void sdram_init(long) + * + * a0 has the clock value + */ + .globl sdram_init + .ent sdram_init +sdram_init: + + /* SDRAM Initialization + */ + li t1, MC_MODUL_BASE + + /* Clear Error log registers */ + sw zero, MC_ERRCAUSE(t1) + sw zero, MC_ERRADDR(t1) + + /* Enable SDRAM module in memory controller */ + li t3, MC_SDRAM_ENABLE + lw t2, MC_CON(t1) + or t3, t2, t3 + sw t3, MC_CON(t1) + + li t1, MC_SDR_MODUL_BASE + + /* disable the controller */ + li t2, 0 + sw t2, MC_CTRLENA(t1) + + li t2, 0x822 + sw t2, MC_IOGP(t1) + + li t2, 0x2 + sw t2, MC_CFGDW(t1) + + /* Set CAS Latency */ + li t2, 0x00000020 + sw t2, MC_MRSCODE(t1) + + /* Set CS0 to SDRAM parameters */ + li t2, 0x000014d8 + sw t2, MC_CFGPB0(t1) + + /* Set SDRAM latency parameters */ + li t2, 0x00036325; /* BC PC100 */ + sw t2, MC_LATENCY(t1) + + /* Set SDRAM refresh rate */ + li t2, 0x00000C30 + sw t2, MC_TREFRESH(t1) + + /* Clear Power-down registers */ + sw zero, MC_SELFRFSH(t1) + + /* Finally enable the controller */ + li t2, 1 + sw t2, MC_CTRLENA(t1) + + j ra + nop + + .end sdram_init + +#endif /* !CONFIG_USE_DDR_RAM */ + +#ifdef CONFIG_USE_DDR_RAM +/* + * void ddrram_init(long) + * + * a0 has the clock value + */ + .globl ddrram_init + .ent ddrram_init +ddrram_init: + + /* DDR-DRAM Initialization + */ + li t1, MC_MODUL_BASE + + /* Clear Error log registers */ + sw zero, MC_ERRCAUSE(t1) + sw zero, MC_ERRADDR(t1) + + /* Enable DDR module in memory controller */ + li t3, MC_DDRRAM_ENABLE + lw t2, MC_CON(t1) + or t3, t2, t3 + sw t3, MC_CON(t1) + + li t1, MC_DDR_MODUL_BASE + + /* Write configuration to DDR controller registers */ + li t2, MC_DC0_VALUE + sw t2, MC_DC00(t1) + + li t2, MC_DC1_VALUE + sw t2, MC_DC01(t1) + + li t2, MC_DC2_VALUE + sw t2, MC_DC02(t1) + + li t2, MC_DC3_VALUE + sw t2, MC_DC03(t1) + + li t2, MC_DC4_VALUE + sw t2, MC_DC04(t1) + + li t2, MC_DC5_VALUE + sw t2, MC_DC05(t1) + + li t2, MC_DC6_VALUE + sw t2, MC_DC06(t1) + + li t2, MC_DC7_VALUE + sw t2, MC_DC07(t1) + + li t2, MC_DC8_VALUE + sw t2, MC_DC08(t1) + + li t2, MC_DC9_VALUE + sw t2, MC_DC09(t1) + + li t2, MC_DC10_VALUE + sw t2, MC_DC10(t1) + + li t2, MC_DC11_VALUE + sw t2, MC_DC11(t1) + + li t2, MC_DC12_VALUE + sw t2, MC_DC12(t1) + + li t2, MC_DC13_VALUE + sw t2, MC_DC13(t1) + + li t2, MC_DC14_VALUE + sw t2, MC_DC14(t1) + + li t2, MC_DC15_VALUE + sw t2, MC_DC15(t1) + + li t2, MC_DC16_VALUE + sw t2, MC_DC16(t1) + + li t2, MC_DC17_VALUE + sw t2, MC_DC17(t1) + + li t2, MC_DC18_VALUE + sw t2, MC_DC18(t1) + + li t2, MC_DC19_VALUE + sw t2, MC_DC19(t1) + + li t2, MC_DC20_VALUE + sw t2, MC_DC20(t1) + + li t2, MC_DC21_VALUE + sw t2, MC_DC21(t1) + + li t2, MC_DC22_VALUE + sw t2, MC_DC22(t1) + + li t2, MC_DC23_VALUE + sw t2, MC_DC23(t1) + + li t2, MC_DC24_VALUE + sw t2, MC_DC24(t1) + + li t2, MC_DC25_VALUE + sw t2, MC_DC25(t1) + + li t2, MC_DC26_VALUE + sw t2, MC_DC26(t1) + + li t2, MC_DC27_VALUE + sw t2, MC_DC27(t1) + + li t2, MC_DC28_VALUE + sw t2, MC_DC28(t1) + + li t2, MC_DC29_VALUE + sw t2, MC_DC29(t1) + + li t2, MC_DC30_VALUE + sw t2, MC_DC30(t1) + + li t2, MC_DC31_VALUE + sw t2, MC_DC31(t1) + + li t2, MC_DC32_VALUE + sw t2, MC_DC32(t1) + + li t2, MC_DC33_VALUE + sw t2, MC_DC33(t1) + + li t2, MC_DC34_VALUE + sw t2, MC_DC34(t1) + + li t2, MC_DC35_VALUE + sw t2, MC_DC35(t1) + + li t2, MC_DC36_VALUE + sw t2, MC_DC36(t1) + + li t2, MC_DC37_VALUE + sw t2, MC_DC37(t1) + + li t2, MC_DC38_VALUE + sw t2, MC_DC38(t1) + + li t2, MC_DC39_VALUE + sw t2, MC_DC39(t1) + + li t2, MC_DC40_VALUE + sw t2, MC_DC40(t1) + + li t2, MC_DC41_VALUE + sw t2, MC_DC41(t1) + + li t2, MC_DC42_VALUE + sw t2, MC_DC42(t1) + + li t2, MC_DC43_VALUE + sw t2, MC_DC43(t1) + + li t2, MC_DC44_VALUE + sw t2, MC_DC44(t1) + + li t2, MC_DC45_VALUE + sw t2, MC_DC45(t1) + + li t2, MC_DC46_VALUE + sw t2, MC_DC46(t1) + + li t2, 0x00000100 + sw t2, MC_DC03(t1) + + j ra + nop + + .end ddrram_init +#endif /* CONFIG_USE_DDR_RAM */ + + .globl lowlevel_init + .ent lowlevel_init +lowlevel_init: + /* EBU, CGU and SDRAM/DDR-RAM Initialization. + */ + move t0, ra + /* We rely on the fact that non of the following ..._init() functions + * modify t0 + */ +#if defined(CONFIG_SYS_EBU_BOOT) +#if defined(DDR166) + /* 0xe8 means CPU0/CPU1 333M, DDR 167M, FPI 83M, PPE 240M */ + li a0,0xe8 +#elif defined(DDR133) + /* 0xe9 means CPU0/CPU1 333M, DDR 133M, FPI 83M, PPE 240M */ + li a0,0xe9 +#else /* defined(DDR111) */ + /* 0xea means CPU0/CPU1 333M, DDR 111M, FPI 83M, PPE 240M */ + li a0,0xea +#endif + bal cgu_init + nop +#endif /* CONFIG_SYS_EBU_BOOT */ + + bal ebu_init + nop + +//06063001-joelin disable the PCI CFRAME mask-start +#ifdef DISABLE_CFRAME + li t1, PCI_CR_PCI //mw bf103034 80000000 + li t2, 0x80000000 + sw t2,0(t1) + + li t1, PCI_CR_PCI_MOD_REG //mw be105430 103 + li t2, 0x103 + sw t2,0(t1) + + li t1, CS_CFM //mw b700006c 0 + li t2, 0x00 + sw t2, 0(t1) + + li t1, PCI_CR_PCI_MOD_REG //mw be105430 103 + li t2, 0x1000103 + sw t2, 0(t1) +#endif +//06063001-joelin disable the PCI CFRAME mask-end + +#ifdef CONFIG_SYS_EBU_BOOT +#ifndef CONFIG_SYS_RAMBOOT +#ifdef CONFIG_USE_DDR_RAM + bal ddrram_init + nop +#else + bal sdram_init + nop +#endif +#endif /* CONFIG_SYS_RAMBOOT */ +#endif /* CONFIG_SYS_EBU_BOOT */ + + move ra, t0 + j ra + nop + + .end lowlevel_init diff --git a/package/uboot-lantiq/files/board/infineon/easy50712/pmuenable.S b/package/uboot-lantiq/files/board/infineon/easy50712/pmuenable.S new file mode 100644 index 0000000..e0d7971 --- /dev/null +++ b/package/uboot-lantiq/files/board/infineon/easy50712/pmuenable.S @@ -0,0 +1,48 @@ +/* + * Power Management unit initialization code for AMAZON development board. + * + * Copyright (c) 2003 Ou Ke, Infineon. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> +#include <asm/regdef.h> + +#define PMU_PWDCR 0xBF10201C +#define PMU_SR 0xBF102020 + + .globl pmuenable + +pmuenable: + li t0, PMU_PWDCR + li t1, 0x2 /* enable everything */ + sw t1, 0(t0) +#if 0 +1: + li t0, PMU_SR + lw t2, 0(t0) + bne t1, t2, 1b + nop +#endif + j ra + nop + + diff --git a/package/uboot-lantiq/files/board/infineon/easy50712/u-boot.lds b/package/uboot-lantiq/files/board/infineon/easy50712/u-boot.lds new file mode 100644 index 0000000..9a6cd1b --- /dev/null +++ b/package/uboot-lantiq/files/board/infineon/easy50712/u-boot.lds @@ -0,0 +1,70 @@ +/* + * (C) Copyright 2003 + * Wolfgang Denk Engineering, <wd@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* +OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips") +*/ +OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradbigmips") +OUTPUT_ARCH(mips) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + *(.text) + } + + . = ALIGN(4); + .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } + + . = ALIGN(4); + .data : { *(.data) } + + . = .; + _gp = ALIGN(16) + 0x7ff0; + + .got : { + __got_start = .; + *(.got) + __got_end = .; + } + + .sdata : { *(.sdata) } + + .u_boot_cmd : { + __u_boot_cmd_start = .; + *(.u_boot_cmd) + __u_boot_cmd_end = .; + } + + uboot_end_data = .; + num_got_entries = (__got_end - __got_start) >> 2; + + . = ALIGN(4); + .sbss (NOLOAD) : { *(.sbss) } + .bss (NOLOAD) : { *(.bss) . = ALIGN(4); } + uboot_end = .; +} diff --git a/package/uboot-lantiq/files/cpu/mips/danube/Makefile b/package/uboot-lantiq/files/cpu/mips/danube/Makefile new file mode 100644 index 0000000..c48d02e --- /dev/null +++ b/package/uboot-lantiq/files/cpu/mips/danube/Makefile @@ -0,0 +1,46 @@ +######################################################################### +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).a + +COBJS = clock.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/package/uboot-lantiq/files/cpu/mips/danube/clock.c b/package/uboot-lantiq/files/cpu/mips/danube/clock.c new file mode 100644 index 0000000..4219f8f --- /dev/null +++ b/package/uboot-lantiq/files/cpu/mips/danube/clock.c @@ -0,0 +1,65 @@ +/* + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/danube.h> + +ulong ifx_get_ddr_hz(void) +{ + static const ulong ddr_freq[] = {166666667,133333333,111111111,83333333}; + return ddr_freq[((*DANUBE_CGU_SYS) & 0x3)]; +} + +ulong ifx_get_cpuclk(void) +{ +#ifdef CONFIG_USE_EMULATOR + return EMULATOR_CPU_SPEED; +#else //NOT CONFIG_USE_EMULATOR + unsigned int ddr_clock=ifx_get_ddr_hz(); + switch((*DANUBE_CGU_SYS) & 0xc){ + case 0: + default: + return 323333333; + case 4: + return ddr_clock; + case 8: + return ddr_clock << 1; + } +#endif +} + +ulong get_bus_freq(ulong dummy) +{ +#ifdef CONFIG_USE_EMULATOR + unsigned int clkCPU; + clkCPU = ifx_get_cpuclk(); + return clkCPU >> 2; +#else //NOT CONFIG_USE_EMULATOR + unsigned int ddr_clock=ifx_get_ddr_hz(); + if ((*DANUBE_CGU_SYS) & 0x40){ + return ddr_clock >> 1; + } + return ddr_clock; +#endif +} + diff --git a/package/uboot-lantiq/files/cpu/mips/danube/ifx_cache.S b/package/uboot-lantiq/files/cpu/mips/danube/ifx_cache.S new file mode 100644 index 0000000..fc482dc --- /dev/null +++ b/package/uboot-lantiq/files/cpu/mips/danube/ifx_cache.S @@ -0,0 +1,60 @@ + +#define IFX_CACHE_EXTRA_INVALID_TAG \ + mtc0 zero, CP0_TAGLO, 1; \ + mtc0 zero, CP0_TAGLO, 2; \ + mtc0 zero, CP0_TAGLO, 3; \ + mtc0 zero, CP0_TAGLO, 4; + +#define IFX_CACHE_EXTRA_OPERATION \ + /* set WST bit */ \ + mfc0 a0, CP0_ECC; \ + li a1, ECCF_WST; \ + or a0, a1; \ + mtc0 a0, CP0_ECC; \ + \ + li a0, K0BASE; \ + move a2, t2; /* icacheSize */ \ + move a3, t4; /* icacheLineSize */ \ + move a1, a2; \ + icacheop(a0,a1,a2,a3,(Index_Store_Tag_I)); \ + \ + /* clear WST bit */ \ + mfc0 a0, CP0_ECC; \ + li a1, ~ECCF_WST; \ + and a0, a1; \ + mtc0 a0, CP0_ECC; \ + \ + /* 1: initialise dcache tags. */ \ + \ + /* cache line size */ \ + li a2, CFG_CACHELINE_SIZE; \ + /* kseg0 mem address */ \ + li a1, 0; \ + li a3, CFG_CACHE_SETS * CFG_CACHE_WAYS; \ +1: \ + /* store tag (invalid, not locked) */ \ + cache 0x8, 0(a1); \ + cache 0x9, 0(a1); \ + \ + add a3, -1; \ + bne a3, zero, 1b; \ + add a1, a2; \ + \ + /* set WST bit */ \ + mfc0 a0, CP0_ECC; \ + li a1, ECCF_WST; \ + or a0, a1; \ + mtc0 a0, CP0_ECC; \ + \ + li a0, K0BASE; \ + move a2, t3; /* dcacheSize */ \ + move a3, t5; /* dcacheLineSize */ \ + move a1, a2; \ + icacheop(a0,a1,a2,a3,(Index_Store_Tag_D)); \ + \ + /* clear WST bit */ \ + mfc0 a0, CP0_ECC; \ + li a1, ~ECCF_WST; \ + and a0, a1; \ + mtc0 a0, CP0_ECC; + diff --git a/package/uboot-lantiq/files/drivers/net/ifx_etop.c b/package/uboot-lantiq/files/drivers/net/ifx_etop.c new file mode 100644 index 0000000..9a9e51f --- /dev/null +++ b/package/uboot-lantiq/files/drivers/net/ifx_etop.c @@ -0,0 +1,374 @@ +/* + * Lantiq CPE device ethernet driver. + * Supposed to work on Twinpass/Danube. + * + * Based on INCA-IP driver: + * (C) Copyright 2003-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2010 + * Thomas Langer, Ralph Hempel + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +#include <malloc.h> +#include <net.h> +#include <miiphy.h> +#include <asm/types.h> +#include <asm/io.h> +#include <asm/addrspace.h> + +#include "ifx_etop.h" + +#define TX_CHAN_NO 7 +#define RX_CHAN_NO 6 + +#define NUM_RX_DESC PKTBUFSRX +#define NUM_TX_DESC 8 +#define TOUT_LOOP 100 + +typedef struct +{ + union + { + struct + { + volatile u32 OWN :1; + volatile u32 C :1; + volatile u32 Sop :1; + volatile u32 Eop :1; + volatile u32 reserved :3; + volatile u32 Byteoffset :2; + volatile u32 reserve :7; + volatile u32 DataLen :16; + }field; + + volatile u32 word; + }status; + + volatile u32 DataPtr; +} dma_rx_descriptor_t; + +typedef struct +{ + union + { + struct + { + volatile u32 OWN :1; + volatile u32 C :1; + volatile u32 Sop :1; + volatile u32 Eop :1; + volatile u32 Byteoffset :5; + volatile u32 reserved :7; + volatile u32 DataLen :16; + }field; + + volatile u32 word; + }status; + + volatile u32 DataPtr; +} dma_tx_descriptor_t; + +static volatile dma_rx_descriptor_t rx_des_ring[NUM_RX_DESC] __attribute__ ((aligned(8))); +static volatile dma_tx_descriptor_t tx_des_ring[NUM_TX_DESC] __attribute__ ((aligned(8))); +static int tx_num, rx_num; + +static volatile IfxDMA_t *pDma = (IfxDMA_t *)CKSEG1ADDR(DANUBE_DMA_BASE); + +static int lq_eth_init(struct eth_device *dev, bd_t * bis); +static int lq_eth_send(struct eth_device *dev, volatile void *packet,int length); +static int lq_eth_recv(struct eth_device *dev); +static void lq_eth_halt(struct eth_device *dev); +static void lq_eth_init_chip(void); +static void lq_eth_init_dma(void); + +static int lq_eth_miiphy_read(char *devname, u8 phyAddr, u8 regAddr, u16 * retVal) +{ + u32 timeout = 50000; + u32 phy, reg; + + if ((phyAddr > 0x1F) || (regAddr > 0x1F) || (retVal == NULL)) + return -1; + + phy = (phyAddr & 0x1F) << 21; + reg = (regAddr & 0x1F) << 16; + + *ETOP_MDIO_ACC = 0xC0000000 | phy | reg; + while ((timeout--) && (*ETOP_MDIO_ACC & 0x80000000)) + udelay(10); + + if (timeout==0) { + *retVal = 0; + return -1; + } + *retVal = *ETOP_MDIO_ACC & 0xFFFF; + return 0; +} + +static int lq_eth_miiphy_write(char *devname, u8 phyAddr, u8 regAddr, u16 data) +{ + u32 timeout = 50000; + u32 phy, reg; + + if ((phyAddr > 0x1F) || (regAddr > 0x1F)) + return -1; + + phy = (phyAddr & 0x1F) << 21; + reg = (regAddr & 0x1F) << 16; + + *ETOP_MDIO_ACC = 0x80000000 | phy | reg | data; + while ((timeout--) && (*ETOP_MDIO_ACC & 0x80000000)) + udelay(10); + + if (timeout==0) + return -1; + return 0; +} + + +int lq_eth_initialize(bd_t * bis) +{ + struct eth_device *dev; + + debug("Entered lq_eth_initialize()\n"); + + if (!(dev = malloc (sizeof *dev))) { + printf("Failed to allocate memory\n"); + return -1; + } + memset(dev, 0, sizeof(*dev)); + + sprintf(dev->name, "lq_cpe_eth"); + dev->init = lq_eth_init; + dev->halt = lq_eth_halt; + dev->send = lq_eth_send; + dev->recv = lq_eth_recv; + + eth_register(dev); + +#if defined (CONFIG_MII) || defined(CONFIG_CMD_MII) + /* register mii command access routines */ + miiphy_register(dev->name, + lq_eth_miiphy_read, lq_eth_miiphy_write); +#endif + + lq_eth_init_dma(); + lq_eth_init_chip(); + + return 0; +} + +static int lq_eth_init(struct eth_device *dev, bd_t * bis) +{ + int i; + uchar *enetaddr = dev->enetaddr; + + debug("lq_eth_init %x:%x:%x:%x:%x:%x\n", + enetaddr[0], enetaddr[1], enetaddr[2], enetaddr[3], enetaddr[4], enetaddr[5]); + + *ENET_MAC_DA0 = (enetaddr[0]<<24) + (enetaddr[1]<<16) + (enetaddr[2]<< 8) + enetaddr[3]; + *ENET_MAC_DA1 = (enetaddr[4]<<24) + (enetaddr[5]<<16); + *ENETS_CFG |= 1<<28; /* enable filter for unicast packets */ + + tx_num=0; + rx_num=0; + + for(i=0;i < NUM_RX_DESC; i++) { + dma_rx_descriptor_t * rx_desc = (dma_rx_descriptor_t *)CKSEG1ADDR(&rx_des_ring[i]); + rx_desc->status.word=0; + rx_desc->status.field.OWN=1; + rx_desc->status.field.DataLen=PKTSIZE_ALIGN; /* 1536 */ + rx_desc->DataPtr=(u32)CKSEG1ADDR(NetRxPackets[i]); + NetRxPackets[i][0] = 0xAA; + } + + /* Reset DMA */ + dma_writel(dma_cs, RX_CHAN_NO); + dma_writel(dma_cctrl, 0x2);/*fix me, need to reset this channel first?*/ + dma_writel(dma_cpoll, 0x80000040); + /*set descriptor base*/ + dma_writel(dma_cdba, (u32)rx_des_ring); + dma_writel(dma_cdlen, NUM_RX_DESC); + dma_writel(dma_cie, 0); + dma_writel(dma_cctrl, 0x30000); + + for(i=0;i < NUM_TX_DESC; i++) { + dma_tx_descriptor_t * tx_desc = (dma_tx_descriptor_t *)CKSEG1ADDR(&tx_des_ring[i]); + memset(tx_desc, 0, sizeof(tx_des_ring[0])); + } + + dma_writel(dma_cs, TX_CHAN_NO); + dma_writel(dma_cctrl, 0x2);/*fix me, need to reset this channel first?*/ + dma_writel(dma_cpoll, 0x80000040); + dma_writel(dma_cdba, (u32)tx_des_ring); + dma_writel(dma_cdlen, NUM_TX_DESC); + dma_writel(dma_cie, 0); + dma_writel(dma_cctrl, 0x30100); + + /* turn on DMA rx & tx channel + */ + dma_writel(dma_cs, RX_CHAN_NO); + dma_writel(dma_cctrl, dma_readl(dma_cctrl) | 1); /*reset and turn on the channel*/ + + return 0; +} + +static void lq_eth_halt(struct eth_device *dev) +{ + int i; + + debug("lq_eth_halt()\n"); + + for(i=0;i<8;i++) { + dma_writel(dma_cs, i); + dma_writel(dma_cctrl, dma_readl(dma_cctrl) & ~1);/*stop the dma channel*/ + } +} + +static int lq_eth_send(struct eth_device *dev, volatile void *packet,int length) +{ + int i; + int res = -1; + volatile dma_tx_descriptor_t * tx_desc = (dma_tx_descriptor_t *)CKSEG1ADDR(&tx_des_ring[tx_num]); + + if (length <= 0) { + printf ("%s: bad packet size: %d\n", dev->name, length); + goto Done; + } + + for(i=0; tx_desc->status.field.OWN==1; i++) { + if (i>=TOUT_LOOP) { + printf("NO Tx Descriptor..."); + goto Done; + } + } + + tx_desc->status.field.Sop=1; + tx_desc->status.field.Eop=1; + tx_desc->status.field.C=0; + tx_desc->DataPtr = (u32)CKSEG1ADDR(packet); + if (length<60) + tx_desc->status.field.DataLen = 60; + else + tx_desc->status.field.DataLen = (u32)length; + + flush_cache((u32)packet, tx_desc->status.field.DataLen); + tx_desc->status.field.OWN=1; + + res=length; + tx_num++; + if (tx_num==NUM_TX_DESC) tx_num=0; + + dma_writel(dma_cs, TX_CHAN_NO); + if (!(dma_readl(dma_cctrl) & 1)) { + dma_writel(dma_cctrl, dma_readl(dma_cctrl) | 1); + } + +Done: + return res; +} + +static int lq_eth_recv(struct eth_device *dev) +{ + int length = 0; + volatile dma_rx_descriptor_t * rx_desc; + + rx_desc = (dma_rx_descriptor_t *)CKSEG1ADDR(&rx_des_ring[rx_num]); + + if ((rx_desc->status.field.C == 0) || (rx_desc->status.field.OWN == 1)) { + return 0; + } + length = rx_desc->status.field.DataLen; + if (length > 4) { + invalidate_dcache_range((u32)CKSEG0ADDR(rx_desc->DataPtr), (u32) CKSEG0ADDR(rx_desc->DataPtr) + length); + NetReceive(NetRxPackets[rx_num], length); + } else { + printf("ERROR: Invalid rx packet length.\n"); + } + + rx_desc->status.field.Sop=0; + rx_desc->status.field.Eop=0; + rx_desc->status.field.C=0; + rx_desc->status.field.DataLen=PKTSIZE_ALIGN; + rx_desc->status.field.OWN=1; + + rx_num++; + if (rx_num == NUM_RX_DESC) + rx_num=0; + + return length; +} + +static void lq_eth_init_chip(void) +{ + *ETOP_MDIO_CFG &= ~0x6; + *ENET_MAC_CFG = 0x187; + + // turn on port0, set to rmii and turn off port1. +#ifdef CONFIG_RMII + *ETOP_CFG = (*ETOP_CFG & 0xFFFFFFFC) | 0x0000000A; +#else + *ETOP_CFG = (*ETOP_CFG & 0xFFFFFFFC) | 0x00000008; +#endif + + *ETOP_IG_PLEN_CTRL = 0x004005EE; // set packetlen. + *ENET_MAC_CFG |= 1<<11; /*enable the crc*/ + return; +} + +static void lq_eth_init_dma(void) +{ + /* Reset DMA */ + dma_writel(dma_ctrl, dma_readl(dma_ctrl) | 1); + dma_writel(dma_irnen, 0);/*disable all the interrupts first*/ + + /* Clear Interrupt Status Register */ + dma_writel(dma_irncr, 0xfffff); + /*disable all the dma interrupts*/ + dma_writel(dma_irnen, 0); + /*disable channel 0 and channel 1 interrupts*/ + + dma_writel(dma_cs, RX_CHAN_NO); + dma_writel(dma_cctrl, 0x2);/*fix me, need to reset this channel first?*/ + dma_writel(dma_cpoll, 0x80000040); + /*set descriptor base*/ + dma_writel(dma_cdba, (u32)rx_des_ring); + dma_writel(dma_cdlen, NUM_RX_DESC); + dma_writel(dma_cie, 0); + dma_writel(dma_cctrl, 0x30000); + + dma_writel(dma_cs, TX_CHAN_NO); + dma_writel(dma_cctrl, 0x2);/*fix me, need to reset this channel first?*/ + dma_writel(dma_cpoll, 0x80000040); + dma_writel(dma_cdba, (u32)tx_des_ring); + dma_writel(dma_cdlen, NUM_TX_DESC); + dma_writel(dma_cie, 0); + dma_writel(dma_cctrl, 0x30100); + /*enable the poll function and set the poll counter*/ + //dma_writel(DMA_CPOLL=DANUBE_DMA_POLL_EN | (DANUBE_DMA_POLL_COUNT<<4); + /*set port properties, enable endian conversion for switch*/ + dma_writel(dma_ps, 0); + dma_writel(dma_pctrl, dma_readl(dma_pctrl) | (0xf<<8));/*enable 32 bit endian conversion*/ + + return; +} diff --git a/package/uboot-lantiq/files/drivers/net/ifx_etop.h b/package/uboot-lantiq/files/drivers/net/ifx_etop.h new file mode 100644 index 0000000..9970868 --- /dev/null +++ b/package/uboot-lantiq/files/drivers/net/ifx_etop.h @@ -0,0 +1,91 @@ +/* + * Lantiq switch ethernet driver for Danube family. + * + * Based on INCA-IP driver: + * (C) Copyright 2003-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#ifndef __DRIVERS_IFX_SW_H__ +#define __DRIVERS_IFX_SW_H__ + +#define DANUBE_PPE32_BASE 0xBE180000 +#define DANUBE_PPE32_DATA_MEM_MAP_REG_BASE (DANUBE_PPE32_BASE + (0x4000 * 4)) + +#define ETOP_MDIO_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0600 * 4))) +#define ETOP_MDIO_ACC ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0601 * 4))) +#define ETOP_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0602 * 4))) +#define ETOP_IG_VLAN_COS ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0603 * 4))) +#define ETOP_IG_DSCP_COS3 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0604 * 4))) +#define ETOP_IG_DSCP_COS2 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0605 * 4))) +#define ETOP_IG_DSCP_COS1 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0606 * 4))) +#define ETOP_IG_DSCP_COS0 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0607 * 4))) +#define ETOP_IG_PLEN_CTRL ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0608 * 4))) +#define ETOP_ISR ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060A * 4))) +#define ETOP_IER ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060B * 4))) +#define ETOP_VPID ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060C * 4))) +#define ENET_MAC_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0610 * 4))) +#define ENETS_DBA ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0612 * 4))) +#define ENETS_CBA ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0613 * 4))) +#define ENETS_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0614 * 4))) +#define ENETS_PGCNT ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0615 * 4))) +#define ENETS_PKTCNT ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0616 * 4))) +#define ENETS_BUF_CTRL ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0617 * 4))) +#define ENETS_COS_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0618 * 4))) +#define ENETS_IGDROP ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0619 * 4))) +#define ENETS_IGERR ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x061A * 4))) +#define ENET_MAC_DA0 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x061B * 4))) +#define ENET_MAC_DA1 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x061C * 4))) + + + +#define DANUBE_DMA_BASE 0xBE104100 + +typedef struct IfxDMA_s +{ + unsigned long dma_clc; /*0x0000*/ + unsigned long dma_rsvd1[1]; /* for mapping */ /*0x0004*/ + unsigned long dma_id; /*0x0008*/ + unsigned long dma_rsvd2[1]; /* for mapping */ /*0x000C*/ + unsigned long dma_ctrl; /*0x0010*/ + unsigned long dma_cpoll; /*0x0014*/ + unsigned long dma_cs; /*0x0018*/ + unsigned long dma_cctrl; /*0x001C*/ + unsigned long dma_cdba; /*0x0020*/ + unsigned long dma_cdlen; /*0x0024*/ + unsigned long dma_cis; /*0x0028*/ + unsigned long dma_cie; /*0x002C*/ + unsigned long dma_rsvd3[4]; /* for mapping */ /*0x0030*/ + unsigned long dma_ps; /*0x0040*/ + unsigned long dma_pctrl; /*0x0044*/ + unsigned long dma_rsvd4[43]; /* for mapping */ /*0x0048*/ + unsigned long dma_irnen; /*0x00F4*/ + unsigned long dma_irncr; /*0x00F8*/ + unsigned long dma_irnicr; /*0x00FC*/ +} IfxDMA_t; + +/* Register access macros */ +#define dma_readl(reg) \ + readl(&pDma->reg) +#define dma_writel(reg,value) \ + writel((value), &pDma->reg) + +int lq_eth_initialize(bd_t * bis); + +#endif /* __DRIVERS_IFX_SW_H__ */ diff --git a/package/uboot-lantiq/files/drivers/serial/ifx_asc.c b/package/uboot-lantiq/files/drivers/serial/ifx_asc.c new file mode 100644 index 0000000..5c13f26 --- /dev/null +++ b/package/uboot-lantiq/files/drivers/serial/ifx_asc.c @@ -0,0 +1,218 @@ +/* + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * (C) Copyright 2009 + * Infineon Technologies AG, http://www.infineon.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <common.h> +#include <asm/io.h> +#include <asm/addrspace.h> + +#include "ifx_asc.h" + +#define SET_BIT(reg, mask) asc_writel(reg, asc_readl(reg) | (mask)) +#define CLEAR_BIT(reg, mask) asc_writel(reg, asc_readl(reg) & (~mask)) +#define SET_BITFIELD(reg, mask, off, val) asc_writel(reg, (asc_readl(reg) & (~mask)) | (val << off) ) + +#undef DEBUG_ASC_RAW +#ifdef DEBUG_ASC_RAW +#define DEBUG_ASC_RAW_RX_BUF 0xA0800000 +#define DEBUG_ASC_RAW_TX_BUF 0xA0900000 +#endif + +DECLARE_GLOBAL_DATA_PTR; + +static IfxAsc_t *pAsc = (IfxAsc_t *)CKSEG1ADDR(CONFIG_SYS_IFX_ASC_BASE); + +/* + * FDV fASC + * BaudRate = ----- * -------------------- + * 512 16 * (ReloadValue+1) + */ + +/* + * FDV fASC + * ReloadValue = ( ----- * --------------- ) - 1 + * 512 16 * BaudRate + */ +static void serial_divs(u32 baudrate, u32 fasc, u32 *pfdv, u32 *preload) +{ + u32 clock = fasc / 16; + + u32 fdv; /* best fdv */ + u32 reload = 0; /* best reload */ + u32 diff; /* smallest diff */ + u32 idiff; /* current diff */ + u32 ireload; /* current reload */ + u32 i; /* current fdv */ + u32 result; /* current resulting baudrate */ + + if (clock > 0x7FFFFF) + clock /= 512; + else + baudrate *= 512; + + fdv = 512; /* start with 1:1 fraction */ + diff = baudrate; /* highest possible */ + + /* i is the test fdv value -- start with the largest possible */ + for (i = 512; i > 0; i--) + { + ireload = (clock * i) / baudrate; + if (ireload < 1) + break; /* already invalid */ + result = (clock * i) / ireload; + + idiff = (result > baudrate) ? (result - baudrate) : (baudrate - result); + if (idiff == 0) + { + fdv = i; + reload = ireload; + break; /* can't do better */ + } + else if (idiff < diff) + { + fdv = i; /* best so far */ + reload = ireload; + diff = idiff; /* update lowest diff*/ + } + } + + *pfdv = (fdv == 512) ? 0 : fdv; + *preload = reload - 1; +} + + +void serial_setbrg (void) +{ + u32 ReloadValue, fdv; + + serial_divs(gd->baudrate, get_bus_freq(0), &fdv, &ReloadValue); + + /* Disable Baud Rate Generator; BG should only be written when R=0 */ + CLEAR_BIT(asc_con, ASCCON_R); + + /* Enable Fractional Divider */ + SET_BIT(asc_con, ASCCON_FDE); /* FDE = 1 */ + + /* Set fractional divider value */ + asc_writel(asc_fdv, fdv & ASCFDV_VALUE_MASK); + + /* Set reload value in BG */ + asc_writel(asc_bg, ReloadValue); + + /* Enable Baud Rate Generator */ + SET_BIT(asc_con, ASCCON_R); /* R = 1 */ +} + + +int serial_init (void) +{ + + /* and we have to set CLC register*/ + CLEAR_BIT(asc_clc, ASCCLC_DISS); + SET_BITFIELD(asc_clc, ASCCLC_RMCMASK, ASCCLC_RMCOFFSET, 0x0001); + + /* initialy we are in async mode */ + asc_writel(asc_con, ASCCON_M_8ASYNC); + + /* select input port */ + asc_writel(asc_pisel, CONSOLE_TTY & 0x1); + + /* TXFIFO's filling level */ + SET_BITFIELD(asc_txfcon, ASCTXFCON_TXFITLMASK, + ASCTXFCON_TXFITLOFF, ASC_TXFIFO_FL); + /* enable TXFIFO */ + SET_BIT(asc_txfcon, ASCTXFCON_TXFEN); + + /* RXFIFO's filling level */ + SET_BITFIELD(asc_txfcon, ASCRXFCON_RXFITLMASK, + ASCRXFCON_RXFITLOFF, ASC_RXFIFO_FL); + /* enable RXFIFO */ + SET_BIT(asc_rxfcon, ASCRXFCON_RXFEN); + + /* set baud rate */ + serial_setbrg(); + + /* enable error signals & Receiver enable */ + SET_BIT(asc_whbstate, ASCWHBSTATE_SETREN|ASCCON_FEN|ASCCON_TOEN|ASCCON_ROEN); + + return 0; +} + + +void serial_putc (const char c) +{ + u32 txFl = 0; +#ifdef DEBUG_ASC_RAW + static u8 * debug = (u8 *) DEBUG_ASC_RAW_TX_BUF; + *debug++=c; +#endif + if (c == '\n') + serial_putc ('\r'); + /* check do we have a free space in the TX FIFO */ + /* get current filling level */ + do { + txFl = ( asc_readl(asc_fstat) & ASCFSTAT_TXFFLMASK ) >> ASCFSTAT_TXFFLOFF; + } + while ( txFl == ASC_TXFIFO_FULL ); + + asc_writel(asc_tbuf, c); /* write char to Transmit Buffer Register */ + + /* check for errors */ + if ( asc_readl(asc_state) & ASCSTATE_TOE ) { + SET_BIT(asc_whbstate, ASCWHBSTATE_CLRTOE); + return; + } +} + +void serial_puts (const char *s) +{ + while (*s) { + serial_putc (*s++); + } +} + +int serial_getc (void) +{ + char c; + while ((asc_readl(asc_fstat) & ASCFSTAT_RXFFLMASK) == 0 ); + c = (char)(asc_readl(asc_rbuf) & 0xff); + +#ifdef DEBUG_ASC_RAW + static u8* debug=(u8*)(DEBUG_ASC_RAW_RX_BUF); + *debug++=c; +#endif + return c; +} + + +int serial_tstc (void) +{ + int res = 1; + + if ( (asc_readl(asc_fstat) & ASCFSTAT_RXFFLMASK) == 0 ) { + res = 0; + } + return res; +} diff --git a/package/uboot-lantiq/files/drivers/serial/ifx_asc.h b/package/uboot-lantiq/files/drivers/serial/ifx_asc.h new file mode 100644 index 0000000..2d3a49e --- /dev/null +++ b/package/uboot-lantiq/files/drivers/serial/ifx_asc.h @@ -0,0 +1,199 @@ +/***************************************************************************** + * DANUBE BootROM + * Copyright (c) 2005, Infineon Technologies AG, All rights reserved + * IFAP DC COM SD + *****************************************************************************/ +#ifndef __ASC_H +#define __ASC_H + +/* channel operating modes */ +#define ASCOPT_CSIZE 0x00000003 +#define ASCOPT_CS7 0x00000001 +#define ASCOPT_CS8 0x00000002 +#define ASCOPT_PARENB 0x00000004 +#define ASCOPT_STOPB 0x00000008 +#define ASCOPT_PARODD 0x00000010 +#define ASCOPT_CREAD 0x00000020 + +#define ASC_OPTIONS (ASCOPT_CREAD | ASCOPT_CS8) + +/* ASC input select (0 or 1) */ +#define CONSOLE_TTY 0 + +#define ASC_TXFIFO_FL 1 +#define ASC_RXFIFO_FL 1 +#define ASC_TXFIFO_FULL 16 + +/* CLC register's bits and bitfields */ +#define ASCCLC_DISR 0x00000001 +#define ASCCLC_DISS 0x00000002 +#define ASCCLC_RMCMASK 0x0000FF00 +#define ASCCLC_RMCOFFSET 8 + +/* CON register's bits and bitfields */ +#define ASCCON_MODEMASK 0x0000000f +#define ASCCON_M_8ASYNC 0x0 +#define ASCCON_M_8IRDA 0x1 +#define ASCCON_M_7ASYNC 0x2 +#define ASCCON_M_7IRDA 0x3 +#define ASCCON_WLSMASK 0x0000000c +#define ASCCON_WLSOFFSET 2 +#define ASCCON_WLS_8BIT 0x0 +#define ASCCON_WLS_7BIT 0x1 +#define ASCCON_PEN 0x00000010 +#define ASCCON_ODD 0x00000020 +#define ASCCON_SP 0x00000040 +#define ASCCON_STP 0x00000080 +#define ASCCON_BRS 0x00000100 +#define ASCCON_FDE 0x00000200 +#define ASCCON_ERRCLK 0x00000400 +#define ASCCON_EMMASK 0x00001800 +#define ASCCON_EMOFFSET 11 +#define ASCCON_EM_ECHO_OFF 0x0 +#define ASCCON_EM_ECHO_AB 0x1 +#define ASCCON_EM_ECHO_ON 0x2 +#define ASCCON_LB 0x00002000 +#define ASCCON_ACO 0x00004000 +#define ASCCON_R 0x00008000 +#define ASCCON_PAL 0x00010000 +#define ASCCON_FEN 0x00020000 +#define ASCCON_RUEN 0x00040000 +#define ASCCON_ROEN 0x00080000 +#define ASCCON_TOEN 0x00100000 +#define ASCCON_BEN 0x00200000 +#define ASCCON_TXINV 0x01000000 +#define ASCCON_RXINV 0x02000000 +#define ASCCON_TXMSB 0x04000000 +#define ASCCON_RXMSB 0x08000000 + +/* STATE register's bits and bitfields */ +#define ASCSTATE_REN 0x00000001 +#define ASCSTATE_PE 0x00010000 +#define ASCSTATE_FE 0x00020000 +#define ASCSTATE_RUE 0x00040000 +#define ASCSTATE_ROE 0x00080000 +#define ASCSTATE_TOE 0x00100000 +#define ASCSTATE_BE 0x00200000 +#define ASCSTATE_TXBVMASK 0x07000000 +#define ASCSTATE_TXBVOFFSET 24 +#define ASCSTATE_TXEOM 0x08000000 +#define ASCSTATE_RXBVMASK 0x70000000 +#define ASCSTATE_RXBVOFFSET 28 +#define ASCSTATE_RXEOM 0x80000000 + +/* WHBSTATE register's bits and bitfields */ +#define ASCWHBSTATE_CLRREN 0x00000001 +#define ASCWHBSTATE_SETREN 0x00000002 +#define ASCWHBSTATE_CLRPE 0x00000004 +#define ASCWHBSTATE_CLRFE 0x00000008 +#define ASCWHBSTATE_CLRRUE 0x00000010 +#define ASCWHBSTATE_CLRROE 0x00000020 +#define ASCWHBSTATE_CLRTOE 0x00000040 +#define ASCWHBSTATE_CLRBE 0x00000080 +#define ASCWHBSTATE_SETPE 0x00000100 +#define ASCWHBSTATE_SETFE 0x00000200 +#define ASCWHBSTATE_SETRUE 0x00000400 +#define ASCWHBSTATE_SETROE 0x00000800 +#define ASCWHBSTATE_SETTOE 0x00001000 +#define ASCWHBSTATE_SETBE 0x00002000 + +/* ABCON register's bits and bitfields */ +#define ASCABCON_ABEN 0x0001 +#define ASCABCON_AUREN 0x0002 +#define ASCABCON_ABSTEN 0x0004 +#define ASCABCON_ABDETEN 0x0008 +#define ASCABCON_FCDETEN 0x0010 + +/* FDV register mask, offset and bitfields*/ +#define ASCFDV_VALUE_MASK 0x000001FF + +/* WHBABCON register's bits and bitfields */ +#define ASCWHBABCON_CLRABEN 0x0001 +#define ASCWHBABCON_SETABEN 0x0002 + +/* ABSTAT register's bits and bitfields */ +#define ASCABSTAT_FCSDET 0x0001 +#define ASCABSTAT_FCCDET 0x0002 +#define ASCABSTAT_SCSDET 0x0004 +#define ASCABSTAT_SCCDET 0x0008 +#define ASCABSTAT_DETWAIT 0x0010 + +/* WHBABSTAT register's bits and bitfields */ +#define ASCWHBABSTAT_CLRFCSDET 0x0001 +#define ASCWHBABSTAT_SETFCSDET 0x0002 +#define ASCWHBABSTAT_CLRFCCDET 0x0004 +#define ASCWHBABSTAT_SETFCCDET 0x0008 +#define ASCWHBABSTAT_CLRSCSDET 0x0010 +#define ASCWHBABSTAT_SETSCSDET 0x0020 +#define ASCWHBABSTAT_CLRSCCDET 0x0040 +#define ASCWHBABSTAT_SETSCCDET 0x0080 +#define ASCWHBABSTAT_CLRDETWAIT 0x0100 +#define ASCWHBABSTAT_SETDETWAIT 0x0200 + +/* TXFCON register's bits and bitfields */ +#define ASCTXFCON_TXFIFO1 0x00000400 +#define ASCTXFCON_TXFEN 0x0001 +#define ASCTXFCON_TXFFLU 0x0002 +#define ASCTXFCON_TXFITLMASK 0x3F00 +#define ASCTXFCON_TXFITLOFF 8 + +/* RXFCON register's bits and bitfields */ +#define ASCRXFCON_RXFIFO1 0x00000400 +#define ASCRXFCON_RXFEN 0x0001 +#define ASCRXFCON_RXFFLU 0x0002 +#define ASCRXFCON_RXFITLMASK 0x3F00 +#define ASCRXFCON_RXFITLOFF 8 + +/* FSTAT register's bits and bitfields */ +#define ASCFSTAT_RXFFLMASK 0x003F +#define ASCFSTAT_TXFFLMASK 0x3F00 +#define ASCFSTAT_TXFFLOFF 8 + +typedef struct IfxAsc_s +{ + unsigned long asc_clc; /*0x0000*/ + unsigned long asc_pisel; /*0x0004*/ + unsigned long asc_id; /*0x0008*/ + unsigned long asc_rsvd1[1]; /* for mapping */ /*0x000C*/ + unsigned long asc_con; /*0x0010*/ + unsigned long asc_state; /*0x0014*/ + unsigned long asc_whbstate; /*0x0018*/ + unsigned long asc_rsvd2[1]; /* for mapping */ /*0x001C*/ + unsigned long asc_tbuf; /*0x0020*/ + unsigned long asc_rbuf; /*0x0024*/ + unsigned long asc_rsvd3[2]; /* for mapping */ /*0x0028*/ + unsigned long asc_abcon; /*0x0030*/ + unsigned long asc_abstat; /* not used */ /*0x0034*/ + unsigned long asc_whbabcon; /*0x0038*/ + unsigned long asc_whbabstat; /* not used */ /*0x003C*/ + unsigned long asc_rxfcon; /*0x0040*/ + unsigned long asc_txfcon; /*0x0044*/ + unsigned long asc_fstat; /*0x0048*/ + unsigned long asc_rsvd4[1]; /* for mapping */ /*0x004C*/ + unsigned long asc_bg; /*0x0050*/ + unsigned long asc_bg_timer; /*0x0054*/ + unsigned long asc_fdv; /*0x0058*/ + unsigned long asc_pmw; /*0x005C*/ + unsigned long asc_modcon; /*0x0060*/ + unsigned long asc_modstat; /*0x0064*/ + unsigned long asc_rsvd5[2]; /* for mapping */ /*0x0068*/ + unsigned long asc_sfcc; /*0x0070*/ + unsigned long asc_rsvd6[3]; /* for mapping */ /*0x0074*/ + unsigned long asc_eomcon; /*0x0080*/ + unsigned long asc_rsvd7[26]; /* for mapping */ /*0x0084*/ + unsigned long asc_dmacon; /*0x00EC*/ + unsigned long asc_rsvd8[1]; /* for mapping */ /*0x00F0*/ + unsigned long asc_irnen; /*0x00F4*/ + unsigned long asc_irnicr; /*0x00F8*/ + unsigned long asc_irncr; /*0x00FC*/ +} IfxAsc_t; + + +/* Register access macros */ +#define asc_readl(reg) \ + readl(&pAsc->reg) +#define asc_writel(reg,value) \ + writel((value), &pAsc->reg) + + +#endif /* __ASC_H */ diff --git a/package/uboot-lantiq/files/include/asm-mips/danube.h b/package/uboot-lantiq/files/include/asm-mips/danube.h new file mode 100644 index 0000000..7caf8f7 --- /dev/null +++ b/package/uboot-lantiq/files/include/asm-mips/danube.h @@ -0,0 +1,2015 @@ +#ifndef DANUBE_H +#define DANUBE_H +/****************************************************************************** + Copyright (c) 2002, Infineon Technologies. All rights reserved. + + No Warranty + Because the program is licensed free of charge, there is no warranty for + the program, to the extent permitted by applicable law. Except when + otherwise stated in writing the copyright holders and/or other parties + provide the program "as is" without warranty of any kind, either + expressed or implied, including, but not limited to, the implied + warranties of merchantability and fitness for a particular purpose. The + entire risk as to the quality and performance of the program is with + you. should the program prove defective, you assume the cost of all + necessary servicing, repair or correction. + + In no event unless required by applicable law or agreed to in writing + will any copyright holder, or any other party who may modify and/or + redistribute the program as permitted above, be liable to you for + damages, including any general, special, incidental or consequential + damages arising out of the use or inability to use the program + (including but not limited to loss of data or data being rendered + inaccurate or losses sustained by you or third parties or a failure of + the program to operate with any other programs), even if such holder or + other party has been advised of the possibility of such damages. +******************************************************************************/ + +/***********************************************************************/ +/* Module : MEI register address and bits */ +/***********************************************************************/ +#define MEI_SPACE_ACCESS 0xB0100C00 +#define MEI_DATA_XFR (0x0000 + MEI_SPACE_ACCESS) +#define MEI_VERSION (0x0200 + MEI_SPACE_ACCESS) +#define ARC_GP_STAT (0x0204 + MEI_SPACE_ACCESS) +#define MEI_XFR_ADDR (0x020C + MEI_SPACE_ACCESS) +#define MEI_TO_ARC_INT (0x021C + MEI_SPACE_ACCESS) +#define ARC_TO_MEI_INT (0x0220 + MEI_SPACE_ACCESS) +#define ARC_TO_MEI_INT_MASK (0x0224 + MEI_SPACE_ACCESS) +#define MEI_DEBUG_WAD (0x0228 + MEI_SPACE_ACCESS) +#define MEI_DEBUG_RAD (0x022C + MEI_SPACE_ACCESS) +#define MEI_DEBUG_DATA (0x0230 + MEI_SPACE_ACCESS) +#define MEI_DEBUG_DEC (0x0234 + MEI_SPACE_ACCESS) +#define MEI_CONTROL (0x0238 + MEI_SPACE_ACCESS) +#define AT_CELLRDY_BC0 (0x023C + MEI_SPACE_ACCESS) +#define AT_CELLRDY_BC1 (0x0240 + MEI_SPACE_ACCESS) +#define AR_CELLRDY_BC0 (0x0244 + MEI_SPACE_ACCESS) +#define AR_CELLRDY_BC1 (0x0248 + MEI_SPACE_ACCESS) +#define AAI_ACCESS (0x024C + MEI_SPACE_ACCESS) +#define AAITXCB0 (0x0300 + MEI_SPACE_ACCESS) +#define AAITXCB1 (0x0304 + MEI_SPACE_ACCESS) +#define AAIRXCB0 (0x0308 + MEI_SPACE_ACCESS) +#define AAIRXCB1 (0x030C + MEI_SPACE_ACCESS) + + +/***********************************************************************/ +/* Module : WDT register address and bits */ +/***********************************************************************/ +#define DANUBE_BIU_WDT_BASE (0xBf8803F0) +#define DANUBE_BIU_WDT_CR (0x0000 + DANUBE_BIU_WDT_BASE) +#define DANUBE_BIU_WDT_SR (0x0008 + DANUBE_BIU_WDT_BASE) + + +/***********************************************************************/ +/* Module : PMU register address and bits */ +/***********************************************************************/ +#define DANUBE_PMU_BASE_ADDR (KSEG1+0x1F102000) + +/***PM Control Register***/ +#define DANUBE_PMU_CR ((volatile u32*)(0x001C + DANUBE_PMU_BASE_ADDR)) +#define DANUBE_PMU_PWDCR DANUBE_PMU_CR +#define DANUBE_PMU_SR ((volatile u32*)(0x0020 + DANUBE_PMU_BASE_ADDR)) + +#define DANUBE_PMU_DMA_SHIFT 5 +#define DANUBE_PMU_PPE_SHIFT 13 +#define DANUBE_PMU_ETOP_SHIFT 22 +#define DANUBE_PMU_ENET0_SHIFT 24 +#define DANUBE_PMU_ENET1_SHIFT 25 + + +#define DANUBE_PMU DANUBE_PMU_BASE_ADDR +/***PM Global Enable Register***/ +#define DANUBE_PMU_PM_GEN ((volatile u32*)(DANUBE_PMU+ 0x0000)) +#define DANUBE_PMU_PM_GEN_EN16 (1 << 16) +#define DANUBE_PMU_PM_GEN_EN15 (1 << 15) +#define DANUBE_PMU_PM_GEN_EN14 (1 << 14) +#define DANUBE_PMU_PM_GEN_EN13 (1 << 13) +#define DANUBE_PMU_PM_GEN_EN12 (1 << 12) +#define DANUBE_PMU_PM_GEN_EN11 (1 << 11) +#define DANUBE_PMU_PM_GEN_EN10 (1 << 10) +#define DANUBE_PMU_PM_GEN_EN9 (1 << 9) +#define DANUBE_PMU_PM_GEN_EN8 (1 << 8) +#define DANUBE_PMU_PM_GEN_EN7 (1 << 7) +#define DANUBE_PMU_PM_GEN_EN6 (1 << 6) +#define DANUBE_PMU_PM_GEN_EN5 (1 << 5) +#define DANUBE_PMU_PM_GEN_EN4 (1 << 4) +#define DANUBE_PMU_PM_GEN_EN3 (1 << 3) +#define DANUBE_PMU_PM_GEN_EN2 (1 << 2) +#define DANUBE_PMU_PM_GEN_EN0 (1 << 0) + +/***PM Power Down Enable Register***/ +#define DANUBE_PMU_PM_PDEN ((volatile u32*)(DANUBE_PMU+ 0x0008)) +#define DANUBE_PMU_PM_PDEN_EN16 (1 << 16) +#define DANUBE_PMU_PM_PDEN_EN15 (1 << 15) +#define DANUBE_PMU_PM_PDEN_EN14 (1 << 14) +#define DANUBE_PMU_PM_PDEN_EN13 (1 << 13) +#define DANUBE_PMU_PM_PDEN_EN12 (1 << 12) +#define DANUBE_PMU_PM_PDEN_EN11 (1 << 11) +#define DANUBE_PMU_PM_PDEN_EN10 (1 << 10) +#define DANUBE_PMU_PM_PDEN_EN9 (1 << 9) +#define DANUBE_PMU_PM_PDEN_EN8 (1 << 8) +#define DANUBE_PMU_PM_PDEN_EN7 (1 << 7) +#define DANUBE_PMU_PM_PDEN_EN5 (1 << 5) +#define DANUBE_PMU_PM_PDEN_EN4 (1 << 4) +#define DANUBE_PMU_PM_PDEN_EN3 (1 << 3) +#define DANUBE_PMU_PM_PDEN_EN2 (1 << 2) +#define DANUBE_PMU_PM_PDEN_EN0 (1 << 0) + +/***PM Wake-Up from Power Down Register***/ +#define DANUBE_PMU_PM_WUP ((volatile u32*)(DANUBE_PMU+ 0x0010)) +#define DANUBE_PMU_PM_WUP_WUP16 (1 << 16) +#define DANUBE_PMU_PM_WUP_WUP15 (1 << 15) +#define DANUBE_PMU_PM_WUP_WUP14 (1 << 14) +#define DANUBE_PMU_PM_WUP_WUP13 (1 << 13) +#define DANUBE_PMU_PM_WUP_WUP12 (1 << 12) +#define DANUBE_PMU_PM_WUP_WUP11 (1 << 11) +#define DANUBE_PMU_PM_WUP_WUP10 (1 << 10) +#define DANUBE_PMU_PM_WUP_WUP9 (1 << 9) +#define DANUBE_PMU_PM_WUP_WUP8 (1 << 8) +#define DANUBE_PMU_PM_PDEN_EN7 (1 << 7) +#define DANUBE_PMU_PM_PDEN_EN5 (1 << 5) +#define DANUBE_PMU_PM_PDEN_EN4 (1 << 4) +#define DANUBE_PMU_PM_PDEN_EN3 (1 << 3) +#define DANUBE_PMU_PM_PDEN_EN2 (1 << 2) +#define DANUBE_PMU_PM_PDEN_EN0 (1 << 0) + +/***PM Wake-Up from Power Down Register***/ +#define DANUBE_PMU_PM_WUP ((volatile u32*)(DANUBE_PMU+ 0x0010)) +#define DANUBE_PMU_PM_WUP_WUP16 (1 << 16) +#define DANUBE_PMU_PM_WUP_WUP15 (1 << 15) +#define DANUBE_PMU_PM_WUP_WUP14 (1 << 14) +#define DANUBE_PMU_PM_WUP_WUP13 (1 << 13) +#define DANUBE_PMU_PM_WUP_WUP12 (1 << 12) +#define DANUBE_PMU_PM_WUP_WUP11 (1 << 11) +#define DANUBE_PMU_PM_WUP_WUP10 (1 << 10) +#define DANUBE_PMU_PM_WUP_WUP9 (1 << 9) +#define DANUBE_PMU_PM_WUP_WUP8 (1 << 8) +#define DANUBE_PMU_PM_WUP_WUP7 (1 << 7) +#define DANUBE_PMU_PM_WUP_WUP5 (1 << 5) +#define DANUBE_PMU_PM_WUP_WUP4 (1 << 4) +#define DANUBE_PMU_PM_WUP_WUP3 (1 << 3) +#define DANUBE_PMU_PM_WUP_WUP2 (1 << 2) +#define DANUBE_PMU_PM_WUP_WUP0 (1 << 0) + +/***PM Control Register***/ +#define DANUBE_PMU_PM_CR ((volatile u32*)(DANUBE_PMU+ 0x0014)) +#define DANUBE_PMU_PM_CR_AWEN (1 << 31) +#define DANUBE_PMU_PM_CR_SWRST (1 << 30) +#define DANUBE_PMU_PM_CR_SWCR (1 << 2) +#define DANUBE_PMU_PM_CR_CRD (value) (((( 1 << 2) - 1) & (value)) << 0) + +/***********************************************************************/ +/* Module : RCU register address and bits */ +/***********************************************************************/ +#define DANUBE_RCU_BASE_ADDR (0xBF203000) + +#define DANUBE_RCU_REQ (0x0010 + DANUBE_RCU_BASE_ADDR) +#define DANUBE_RCU_RST_REQ ((volatile u32*)(DANUBE_RCU_REQ)) +#define DANUBE_RCU_STAT (0x0014 + DANUBE_RCU_BASE_ADDR) +#define DANUBE_RCU_RST_SR ( (volatile u32 *)(DANUBE_RCU_STAT)) +#define DANUBE_RCU_PCI_RDY ( (volatile u32 *)(DANUBE_RCU_BASE_ADDR+0x28)) +#define DANUBE_RCU_MON (0x0030 + DANUBE_RCU_BASE_ADDR) + + +/***********************************************************************/ +/* Module : BCU register address and bits */ +/***********************************************************************/ +#define DANUBE_BCU_BASE_ADDR (0xB0100000) +/***BCU Control Register (0010H)***/ +#define DANUBE_BCU_CON (0x0010 + DANUBE_BCU_BASE_ADDR) +#define DANUBE_BCU_BCU_CON_SPC (value) (((( 1 << 8) - 1) & (value)) << 24) +#define DANUBE_BCU_BCU_CON_SPE (1 << 19) +#define DANUBE_BCU_BCU_CON_PSE (1 << 18) +#define DANUBE_BCU_BCU_CON_DBG (1 << 16) +#define DANUBE_BCU_BCU_CON_TOUT (value) (((( 1 << 16) - 1) & (value)) << 0) + + +/***BCU Error Control Capture Register (0020H)***/ +#define DANUBE_BCU_ECON (0x0020 + DANUBE_BCU_BASE_ADDR) +#define DANUBE_BCU_BCU_ECON_TAG (value) (((( 1 << 4) - 1) & (value)) << 24) +#define DANUBE_BCU_BCU_ECON_RDN (1 << 23) +#define DANUBE_BCU_BCU_ECON_WRN (1 << 22) +#define DANUBE_BCU_BCU_ECON_SVM (1 << 21) +#define DANUBE_BCU_BCU_ECON_ACK (value) (((( 1 << 2) - 1) & (value)) << 19) +#define DANUBE_BCU_BCU_ECON_ABT (1 << 18) +#define DANUBE_BCU_BCU_ECON_RDY (1 << 17) +#define DANUBE_BCU_BCU_ECON_TOUT (1 << 16) +#define DANUBE_BCU_BCU_ECON_ERRCNT (value) (((( 1 << 16) - 1) & (value)) << 0) +#define DANUBE_BCU_BCU_ECON_OPC (value) (((( 1 << 4) - 1) & (value)) << 28) + +/***BCU Error Address Capture Register (0024 H)***/ +#define DANUBE_BCU_EADD (0x0024 + DANUBE_BCU_BASE_ADDR) + +/***BCU Error Data Capture Register (0028H)***/ +#define DANUBE_BCU_EDAT (0x0028 + DANUBE_BCU_BASE_ADDR) + +#define DANUBE_BCU_IRNEN (0x00F4 + DANUBE_BCU_BASE_ADDR) +#define DANUBE_BCU_IRNICR (0x00F8 + DANUBE_BCU_BASE_ADDR) +#define DANUBE_BCU_IRNCR (0x00FC + DANUBE_BCU_BASE_ADDR) + + +/***********************************************************************/ +/* Module : MBC register address and bits */ +/***********************************************************************/ + +#define DANUBE_MBC (0xBF103000) +/***********************************************************************/ + + +/***Mailbox CPU Configuration Register***/ +#define DANUBE_MBC_MBC_CFG ((volatile u32*)(DANUBE_MBC+ 0x0080)) +#define DANUBE_MBC_MBC_CFG_SWAP (value) (((( 1 << 2) - 1) & (value)) << 6) +#define DANUBE_MBC_MBC_CFG_RES (1 << 5) +#define DANUBE_MBC_MBC_CFG_FWID (value) (((( 1 << 4) - 1) & (value)) << 1) +#define DANUBE_MBC_MBC_CFG_SIZE (1 << 0) + +/***Mailbox CPU Interrupt Status Register***/ +#define DANUBE_MBC_MBC_ISR ((volatile u32*)(DANUBE_MBC+ 0x0084)) +#define DANUBE_MBC_MBC_ISR_B3DA (1 << 31) +#define DANUBE_MBC_MBC_ISR_B2DA (1 << 30) +#define DANUBE_MBC_MBC_ISR_B1E (1 << 29) +#define DANUBE_MBC_MBC_ISR_B0E (1 << 28) +#define DANUBE_MBC_MBC_ISR_WDT (1 << 27) +#define DANUBE_MBC_MBC_ISR_DS260 (value) (((( 1 << 27) - 1) & (value)) << 0) + +/***Mailbox CPU Mask Register***/ +#define DANUBE_MBC_MBC_MSK ((volatile u32*)(DANUBE_MBC+ 0x0088)) +#define DANUBE_MBC_MBC_MSK_B3DA (1 << 31) +#define DANUBE_MBC_MBC_MSK_B2DA (1 << 30) +#define DANUBE_MBC_MBC_MSK_B1E (1 << 29) +#define DANUBE_MBC_MBC_MSK_B0E (1 << 28) +#define DANUBE_MBC_MBC_MSK_WDT (1 << 27) +#define DANUBE_MBC_MBC_MSK_DS260 (value) (((( 1 << 27) - 1) & (value)) << 0) + +/***Mailbox CPU Mask 01 Register***/ +#define DANUBE_MBC_MBC_MSK01 ((volatile u32*)(DANUBE_MBC+ 0x008C)) +#define DANUBE_MBC_MBC_MSK01_B3DA (1 << 31) +#define DANUBE_MBC_MBC_MSK01_B2DA (1 << 30) +#define DANUBE_MBC_MBC_MSK01_B1E (1 << 29) +#define DANUBE_MBC_MBC_MSK01_B0E (1 << 28) +#define DANUBE_MBC_MBC_MSK01_WDT (1 << 27) +#define DANUBE_MBC_MBC_MSK01_DS260 (value) (((( 1 << 27) - 1) & (value)) << 0) + +/***Mailbox CPU Mask 10 Register***/ +#define DANUBE_MBC_MBC_MSK10 ((volatile u32*)(DANUBE_MBC+ 0x0090)) +#define DANUBE_MBC_MBC_MSK10_B3DA (1 << 31) +#define DANUBE_MBC_MBC_MSK10_B2DA (1 << 30) +#define DANUBE_MBC_MBC_MSK10_B1E (1 << 29) +#define DANUBE_MBC_MBC_MSK10_B0E (1 << 28) +#define DANUBE_MBC_MBC_MSK10_WDT (1 << 27) +#define DANUBE_MBC_MBC_MSK10_DS260 (value) (((( 1 << 27) - 1) & (value)) << 0) + +/***Mailbox CPU Short Command Register***/ +#define DANUBE_MBC_MBC_CMD ((volatile u32*)(DANUBE_MBC+ 0x0094)) +#define DANUBE_MBC_MBC_CMD_CS270 (value) (((( 1 << 28) - 1) & (value)) << 0) + +/***Mailbox CPU Input Data of Buffer 0***/ +#define DANUBE_MBC_MBC_ID0 ((volatile u32*)(DANUBE_MBC+ 0x0000)) +#define DANUBE_MBC_MBC_ID0_INDATA + +/***Mailbox CPU Input Data of Buffer 1***/ +#define DANUBE_MBC_MBC_ID1 ((volatile u32*)(DANUBE_MBC+ 0x0020)) +#define DANUBE_MBC_MBC_ID1_INDATA + +/***Mailbox CPU Output Data of Buffer 2***/ +#define DANUBE_MBC_MBC_OD2 ((volatile u32*)(DANUBE_MBC+ 0x0040)) +#define DANUBE_MBC_MBC_OD2_OUTDATA + +/***Mailbox CPU Output Data of Buffer 3***/ +#define DANUBE_MBC_MBC_OD3 ((volatile u32*)(DANUBE_MBC+ 0x0060)) +#define DANUBE_MBC_MBC_OD3_OUTDATA + +/***Mailbox CPU Control Register of Buffer 0***/ +#define DANUBE_MBC_MBC_CR0 ((volatile u32*)(DANUBE_MBC+ 0x0004)) +#define DANUBE_MBC_MBC_CR0_RDYABTFLS (value) (((( 1 << 3) - 1) & (value)) << 0) + +/***Mailbox CPU Control Register of Buffer 1***/ +#define DANUBE_MBC_MBC_CR1 ((volatile u32*)(DANUBE_MBC+ 0x0024)) +#define DANUBE_MBC_MBC_CR1_RDYABTFLS (value) (((( 1 << 3) - 1) & (value)) << 0) + +/***Mailbox CPU Control Register of Buffer 2***/ +#define DANUBE_MBC_MBC_CR2 ((volatile u32*)(DANUBE_MBC+ 0x0044)) +#define DANUBE_MBC_MBC_CR2_RDYABTFLS (value) (((( 1 << 3) - 1) & (value)) << 0) + +/***Mailbox CPU Control Register of Buffer 3***/ +#define DANUBE_MBC_MBC_CR3 ((volatile u32*)(DANUBE_MBC+ 0x0064)) +#define DANUBE_MBC_MBC_CR3_RDYABTFLS (value) (((( 1 << 3) - 1) & (value)) << 0) + +/***Mailbox CPU Free Space of Buffer 0***/ +#define DANUBE_MBC_MBC_FS0 ((volatile u32*)(DANUBE_MBC+ 0x0008)) +#define DANUBE_MBC_MBC_FS0_FS + +/***Mailbox CPU Free Space of Buffer 1***/ +#define DANUBE_MBC_MBC_FS1 ((volatile u32*)(DANUBE_MBC+ 0x0028)) +#define DANUBE_MBC_MBC_FS1_FS + +/***Mailbox CPU Free Space of Buffer 2***/ +#define DANUBE_MBC_MBC_FS2 ((volatile u32*)(DANUBE_MBC+ 0x0048)) +#define DANUBE_MBC_MBC_FS2_FS + +/***Mailbox CPU Free Space of Buffer 3***/ +#define DANUBE_MBC_MBC_FS3 ((volatile u32*)(DANUBE_MBC+ 0x0068)) +#define DANUBE_MBC_MBC_FS3_FS + +/***Mailbox CPU Data Available in Buffer 0***/ +#define DANUBE_MBC_MBC_DA0 ((volatile u32*)(DANUBE_MBC+ 0x000C)) +#define DANUBE_MBC_MBC_DA0_DA + +/***Mailbox CPU Data Available in Buffer 1***/ +#define DANUBE_MBC_MBC_DA1 ((volatile u32*)(DANUBE_MBC+ 0x002C)) +#define DANUBE_MBC_MBC_DA1_DA + +/***Mailbox CPU Data Available in Buffer 2***/ +#define DANUBE_MBC_MBC_DA2 ((volatile u32*)(DANUBE_MBC+ 0x004C)) +#define DANUBE_MBC_MBC_DA2_DA + +/***Mailbox CPU Data Available in Buffer 3***/ +#define DANUBE_MBC_MBC_DA3 ((volatile u32*)(DANUBE_MBC+ 0x006C)) +#define DANUBE_MBC_MBC_DA3_DA + +/***Mailbox CPU Input Absolute Pointer of Buffer 0***/ +#define DANUBE_MBC_MBC_IABS0 ((volatile u32*)(DANUBE_MBC+ 0x0010)) +#define DANUBE_MBC_MBC_IABS0_IABS + +/***Mailbox CPU Input Absolute Pointer of Buffer 1***/ +#define DANUBE_MBC_MBC_IABS1 ((volatile u32*)(DANUBE_MBC+ 0x0030)) +#define DANUBE_MBC_MBC_IABS1_IABS + +/***Mailbox CPU Input Absolute Pointer of Buffer 2***/ +#define DANUBE_MBC_MBC_IABS2 ((volatile u32*)(DANUBE_MBC+ 0x0050)) +#define DANUBE_MBC_MBC_IABS2_IABS + +/***Mailbox CPU Input Absolute Pointer of Buffer 3***/ +#define DANUBE_MBC_MBC_IABS3 ((volatile u32*)(DANUBE_MBC+ 0x0070)) +#define DANUBE_MBC_MBC_IABS3_IABS + +/***Mailbox CPU Input Temporary Pointer of Buffer 0***/ +#define DANUBE_MBC_MBC_ITMP0 ((volatile u32*)(DANUBE_MBC+ 0x0014)) +#define DANUBE_MBC_MBC_ITMP0_ITMP + +/***Mailbox CPU Input Temporary Pointer of Buffer 1***/ +#define DANUBE_MBC_MBC_ITMP1 ((volatile u32*)(DANUBE_MBC+ 0x0034)) +#define DANUBE_MBC_MBC_ITMP1_ITMP + +/***Mailbox CPU Input Temporary Pointer of Buffer 2***/ +#define DANUBE_MBC_MBC_ITMP2 ((volatile u32*)(DANUBE_MBC+ 0x0054)) +#define DANUBE_MBC_MBC_ITMP2_ITMP + +/***Mailbox CPU Input Temporary Pointer of Buffer 3***/ +#define DANUBE_MBC_MBC_ITMP3 ((volatile u32*)(DANUBE_MBC+ 0x0074)) +#define DANUBE_MBC_MBC_ITMP3_ITMP + +/***Mailbox CPU Output Absolute Pointer of Buffer 0***/ +#define DANUBE_MBC_MBC_OABS0 ((volatile u32*)(DANUBE_MBC+ 0x0018)) +#define DANUBE_MBC_MBC_OABS0_OABS + +/***Mailbox CPU Output Absolute Pointer of Buffer 1***/ +#define DANUBE_MBC_MBC_OABS1 ((volatile u32*)(DANUBE_MBC+ 0x0038)) +#define DANUBE_MBC_MBC_OABS1_OABS + +/***Mailbox CPU Output Absolute Pointer of Buffer 2***/ +#define DANUBE_MBC_MBC_OABS2 ((volatile u32*)(DANUBE_MBC+ 0x0058)) +#define DANUBE_MBC_MBC_OABS2_OABS + +/***Mailbox CPU Output Absolute Pointer of Buffer 3***/ +#define DANUBE_MBC_MBC_OABS3 ((volatile u32*)(DANUBE_MBC+ 0x0078)) +#define DANUBE_MBC_MBC_OABS3_OABS + +/***Mailbox CPU Output Temporary Pointer of Buffer 0***/ +#define DANUBE_MBC_MBC_OTMP0 ((volatile u32*)(DANUBE_MBC+ 0x001C)) +#define DANUBE_MBC_MBC_OTMP0_OTMP + +/***Mailbox CPU Output Temporary Pointer of Buffer 1***/ +#define DANUBE_MBC_MBC_OTMP1 ((volatile u32*)(DANUBE_MBC+ 0x003C)) +#define DANUBE_MBC_MBC_OTMP1_OTMP + +/***Mailbox CPU Output Temporary Pointer of Buffer 2***/ +#define DANUBE_MBC_MBC_OTMP2 ((volatile u32*)(DANUBE_MBC+ 0x005C)) +#define DANUBE_MBC_MBC_OTMP2_OTMP + +/***Mailbox CPU Output Temporary Pointer of Buffer 3***/ +#define DANUBE_MBC_MBC_OTMP3 ((volatile u32*)(DANUBE_MBC+ 0x007C)) +#define DANUBE_MBC_MBC_OTMP3_OTMP + +/***DSP Control Register***/ +#define DANUBE_MBC_DCTRL ((volatile u32*)(DANUBE_MBC+ 0x00A0)) +#define DANUBE_MBC_DCTRL_BA (1 << 0) +#define DANUBE_MBC_DCTRL_BMOD (value) (((( 1 << 3) - 1) & (value)) << 1) +#define DANUBE_MBC_DCTRL_IDL (1 << 4) +#define DANUBE_MBC_DCTRL_RES (1 << 15) + +/***DSP Status Register***/ +#define DANUBE_MBC_DSTA ((volatile u32*)(DANUBE_MBC+ 0x00A4)) +#define DANUBE_MBC_DSTA_IDLE (1 << 0) +#define DANUBE_MBC_DSTA_PD (1 << 1) + +/***DSP Test 1 Register***/ +#define DANUBE_MBC_DTST1 ((volatile u32*)(DANUBE_MBC+ 0x00A8)) +#define DANUBE_MBC_DTST1_ABORT (1 << 0) +#define DANUBE_MBC_DTST1_HWF32 (1 << 1) +#define DANUBE_MBC_DTST1_HWF4M (1 << 2) +#define DANUBE_MBC_DTST1_HWFOP (1 << 3) + + +/***********************************************************************/ +/* Module : SSC1 register address and bits */ +/***********************************************************************/ +#define DANUBE_SSC1 (KSEG1+0x1e100800) +/***********************************************************************/ +/***SSC Clock Control Register***/ +#define DANUBE_SSC_CLC (0x0000) +#define DANUBE_SSC_CLC_RMC(value) (((( 1 << 8) - 1) & (value)) << 8) +#define DANUBE_SSC_CLC_DISS (1 << 1) +#define DANUBE_SSC_CLC_DISR (1 << 0) +/***SSC Port Input Selection Register***/ +#define DANUBE_SSC_PISEL (0x0004) +/***SSC Identification Register***/ +#define DANUBE_SSC_ID (0x0008) +/***Control Register (Programming Mode)***/ +#define DANUBE_SSC_CON (0x0010) +#define DANUBE_SSC_CON_RUEN (1 << 12) +#define DANUBE_SSC_CON_TUEN (1 << 11) +#define DANUBE_SSC_CON_AEN (1 << 10) +#define DANUBE_SSC_CON_REN (1 << 9) +#define DANUBE_SSC_CON_TEN (1 << 8) +#define DANUBE_SSC_CON_LB (1 << 7) +#define DANUBE_SSC_CON_PO (1 << 6) +#define DANUBE_SSC_CON_PH (1 << 5) +#define DANUBE_SSC_CON_HB (1 << 4) +#define DANUBE_SSC_CON_BM(value) (((( 1 << 5) - 1) & (value)) << 16) +#define DANUBE_SSC_CON_RX_OFF (1 << 1) +#define DANUBE_SSC_CON_TX_OFF (1 << 0) +/***SCC Status Register***/ +#define DANUBE_SSC_STATE (0x0014) +#define DANUBE_SSC_STATE_EN (1 << 0) +#define DANUBE_SSC_STATE_MS (1 << 1) +#define DANUBE_SSC_STATE_BSY (1 << 13) +#define DANUBE_SSC_STATE_RUE (1 << 12) +#define DANUBE_SSC_STATE_TUE (1 << 11) +#define DANUBE_SSC_STATE_AE (1 << 10) +#define DANUBE_SSC_STATE_RE (1 << 9) +#define DANUBE_SSC_STATE_TE (1 << 8) +#define DANUBE_SSC_STATE_BC(value) (((( 1 << 5) - 1) & (value)) << 16) +/***SSC Write Hardware Modified Control Register***/ +#define DANUBE_SSC_WHBSTATE ( 0x0018) +#define DANUBE_SSC_WHBSTATE_SETBE (1 << 15) +#define DANUBE_SSC_WHBSTATE_SETPE (1 << 14) +#define DANUBE_SSC_WHBSTATE_SETRE (1 << 13) +#define DANUBE_SSC_WHBSTATE_SETTE (1 << 12) +#define DANUBE_SSC_WHBSTATE_CLRBE (1 << 11) +#define DANUBE_SSC_WHBSTATE_CLRPE (1 << 10) +#define DANUBE_SSC_WHBSTATE_CLRRE (1 << 9) +#define DANUBE_SSC_WHBSTATE_CLRTE (1 << 8) +/***SSC Transmitter Buffer Register***/ +#define DANUBE_SSC_TB (0x0020) +#define DANUBE_SSC_TB_TB_VALUE(value) (((( 1 << 16) - 1) & (value)) << 0) +/***SSC Receiver Buffer Register***/ +#define DANUBE_SSC_RB (0x0024) +#define DANUBE_SSC_RB_RB_VALUE(value) (((( 1 << 16) - 1) & (value)) << 0) +/***SSC Receive FIFO Control Register***/ +#define DANUBE_SSC_RXFCON (0x0030) +#define DANUBE_SSC_RXFCON_RXFITL(value) (((( 1 << 6) - 1) & (value)) << 8) +#define DANUBE_SSC_RXFCON_RXTMEN (1 << 2) +#define DANUBE_SSC_RXFCON_RXFLU (1 << 1) +#define DANUBE_SSC_RXFCON_RXFEN (1 << 0) +/***SSC Transmit FIFO Control Register***/ +#define DANUBE_SSC_TXFCON ( 0x0034) +#define DANUBE_SSC_TXFCON_RXFITL(value) (((( 1 << 6) - 1) & (value)) << 8) +#define DANUBE_SSC_TXFCON_TXTMEN (1 << 2) +#define DANUBE_SSC_TXFCON_TXFLU (1 << 1) +#define DANUBE_SSC_TXFCON_TXFEN (1 << 0) +/***SSC FIFO Status Register***/ +#define DANUBE_SSC_FSTAT (0x0038) +#define DANUBE_SSC_FSTAT_TXFFL(value) (((( 1 << 6) - 1) & (value)) << 8) +#define DANUBE_SSC_FSTAT_RXFFL(value) (((( 1 << 6) - 1) & (value)) << 0) +/***SSC Baudrate Timer Reload Register***/ +#define DANUBE_SSC_BR (0x0040) +#define DANUBE_SSC_BR_BR_VALUE(value) (((( 1 << 16) - 1) & (value)) << 0) +#define DANUBE_SSC_BRSTAT (0x0044) +#define DANUBE_SSC_SFCON (0x0060) +#define DANUBE_SSC_SFSTAT (0x0064) +#define DANUBE_SSC_GPOCON (0x0070) +#define DANUBE_SSC_GPOSTAT (0x0074) +#define DANUBE_SSC_WHBGPOSTAT (0x0078) +#define DANUBE_SSC_RXREQ (0x0080) +#define DANUBE_SSC_RXCNT (0x0084) +/*DMA Registers in Bus Clock Domain*/ +#define DANUBE_SSC_DMA_CON (0x00EC) +/*interrupt Node Registers in Bus Clock Domain*/ +#define DANUBE_SSC_IRNEN (0x00F4) +#define DANUBE_SSC_IRNCR (0x00F8) +#define DANUBE_SSC_IRNICR (0x00FC) +#define DANUBE_SSC_IRN_FIR 0x8 +#define DANUBE_SSC_IRN_EIR 0x4 +#define DANUBE_SSC_IRN_RIR 0x2 +#define DANUBE_SSC_IRN_TIR 0x1 + + +#define DANUBE_SSC1_CLC ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_CLC)) +#define DANUBE_SSC1_ID ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_ID)) +#define DANUBE_SSC1_CON ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_CON)) +#define DANUBE_SSC1_STATE ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_STATE)) +#define DANUBE_SSC1_WHBSTATE ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_WHBSTATE)) +#define DANUBE_SSC1_TB ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_TB)) +#define DANUBE_SSC1_RB ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_RB)) +#define DANUBE_SSC1_FSTAT ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_FSTAT)) +#define DANUBE_SSC1_PISEL ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_PISEL)) +#define DANUBE_SSC1_RXFCON ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_RXFCON)) +#define DANUBE_SSC1_TXFCON ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_TXFCON)) +#define DANUBE_SSC1_BR ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_BR)) +#define DANUBE_SSC1_BRSTAT ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_BRSTAT)) +#define DANUBE_SSC1_SFCON ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_SFCON)) +#define DANUBE_SSC1_SFSTAT ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_SFSTAT)) +#define DANUBE_SSC1_GPOCON ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_GPOCON)) +#define DANUBE_SSC1_GPOSTAT ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_GPOSTAT)) +#define DANUBE_SSC1_WHBGPOSTAT ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_WHBGPOSTAT)) +#define DANUBE_SSC1_RXREQ ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_RXREQ)) +#define DANUBE_SSC1_RXCNT ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_RXCNT)) +#define DANUBE_SSC1_DMA_CON ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_DMA_CON)) +#define DANUBE_SSC1_IRNEN ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_IRNEN)) +#define DANUBE_SSC1_IRNICR ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_IRNICR)) +#define DANUBE_SSC1_IRNCR ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_IRNCR)) + +/***********************************************************************/ +/* Module : GPIO register address and bits */ +/***********************************************************************/ +#define DANUBE_GPIO (0xBE100B00) +/***Port 0 Data Output Register (0010H)***/ +#define DANUBE_GPIO_P0_OUT ((volatile u32 *)(DANUBE_GPIO+ 0x0010)) +/***Port 1 Data Output Register (0040H)***/ +#define DANUBE_GPIO_P1_OUT ((volatile u32 *)(DANUBE_GPIO+ 0x0040)) +/***Port 0 Data Input Register (0014H)***/ +#define DANUBE_GPIO_P0_IN ((volatile u32 *)(DANUBE_GPIO+ 0x0014)) +/***Port 1 Data Input Register (0044H)***/ +#define DANUBE_GPIO_P1_IN ((volatile u32 *)(DANUBE_GPIO+ 0x0044)) +/***Port 0 Direction Register (0018H)***/ +#define DANUBE_GPIO_P0_DIR ((volatile u32 *)(DANUBE_GPIO+ 0x0018)) +/***Port 1 Direction Register (0048H)***/ +#define DANUBE_GPIO_P1_DIR ((volatile u32 *)(DANUBE_GPIO+ 0x0048)) +/***Port 0 Alternate Function Select Register 0 (001C H) ***/ +#define DANUBE_GPIO_P0_ALTSEL0 ((volatile u32 *)(DANUBE_GPIO+ 0x001C)) +/***Port 1 Alternate Function Select Register 0 (004C H) ***/ +#define DANUBE_GPIO_P1_ALTSEL0 ((volatile u32 *)(DANUBE_GPIO+ 0x004C)) +/***Port 0 Alternate Function Select Register 1 (0020 H) ***/ +#define DANUBE_GPIO_P0_ALTSEL1 ((volatile u32 *)(DANUBE_GPIO+ 0x0020)) +/***Port 1 Alternate Function Select Register 0 (0050 H) ***/ +#define DANUBE_GPIO_P1_ALTSEL1 ((volatile u32 *)(DANUBE_GPIO+ 0x0050)) +/***Port 0 Open Drain Control Register (0024H)***/ +#define DANUBE_GPIO_P0_OD ((volatile u32 *)(DANUBE_GPIO+ 0x0024)) +/***Port 1 Open Drain Control Register (0054H)***/ +#define DANUBE_GPIO_P1_OD ((volatile u32 *)(DANUBE_GPIO+ 0x0054)) +/***Port 0 Input Schmitt-Trigger Off Register (0028 H) ***/ +#define DANUBE_GPIO_P0_STOFF ((volatile u32 *)(DANUBE_GPIO+ 0x0028)) +/***Port 1 Input Schmitt-Trigger Off Register (0058 H) ***/ +#define DANUBE_GPIO_P1_STOFF ((volatile u32 *)(DANUBE_GPIO+ 0x0058)) +/***Port 0 Pull Up/Pull Down Select Register (002C H)***/ +#define DANUBE_GPIO_P0_PUDSEL ((volatile u32 *)(DANUBE_GPIO+ 0x002C)) +/***Port 1 Pull Up/Pull Down Select Register (005C H)***/ +#define DANUBE_GPIO_P1_PUDSEL ((volatile u32 *)(DANUBE_GPIO+ 0x005C)) +/***Port 0 Pull Up Device Enable Register (0030 H)***/ +#define DANUBE_GPIO_P0_PUDEN ((volatile u32 *)(DANUBE_GPIO+ 0x0030)) +/***Port 1 Pull Up Device Enable Register (0060 H)***/ +#define DANUBE_GPIO_P1_PUDEN ((volatile u32 *)(DANUBE_GPIO+ 0x0060)) +/***********************************************************************/ +/* Module : CGU register address and bits */ +/***********************************************************************/ + +#define DANUBE_CGU (0xBF103000) +/***********************************************************************/ + +/***CGU Clock PLL0 ***/ +#define DANUBE_CGU_PLL0_CFG ((volatile u32*)(DANUBE_CGU+ 0x0004)) +/***CGU Clock PLL1 ***/ +#define DANUBE_CGU_PLL1_CFG ((volatile u32*)(DANUBE_CGU+ 0x0008)) +/***CGU Clock SYS Mux Register***/ +#define DANUBE_CGU_SYS ((volatile u32*)(DANUBE_CGU+ 0x0010)) +/***CGU Interface Clock Control Register***/ +#define DANUBE_CGU_IFCCR ((volatile u32*)(DANUBE_CGU+ 0x0018)) +/***CGU PCI Clock Control Register**/ +#define DANUBE_CGU_PCICR ((volatile u32*)(DANUBE_CGU+ 0x0034)) + + +/***********************************************************************/ +/* Module : PCI register address and bits */ +/***********************************************************************/ +#define PCI_CR_PR_OFFSET 0xBE105400 +#define PCI_CR_CLK_CTRL_REG (PCI_CR_PR_OFFSET + 0x0000) + +#define PCI_CR_PCI_ID_REG (PCI_CR_PR_OFFSET + 0x0004) +#define PCI_CR_SFT_RST_REG (PCI_CR_PR_OFFSET + 0x0010) +#define PCI_CR_PCI_FPI_ERR_ADDR_REG (PCI_CR_PR_OFFSET + 0x0014) +#define PCI_CR_FCI_PCI_ERR_ADDR_REG (PCI_CR_PR_OFFSET + 0x0018) +#define PCI_CR_FPI_ERR_TAG_REG (PCI_CR_PR_OFFSET + 0x001C) +#define PCI_CR_PCI_IRR_REG (PCI_CR_PR_OFFSET + 0x0020) +#define PCI_CR_PCI_IRA_REG (PCI_CR_PR_OFFSET + 0x0024) +#define PCI_CR_PCI_IRM_REG (PCI_CR_PR_OFFSET + 0x0028) +#define PCI_CR_PCI_EOI_REG (PCI_CR_PR_OFFSET + 0x002C) +#define PCI_CR_PCI_MOD_REG (PCI_CR_PR_OFFSET + 0x0030) +#define PCI_CR_DV_ID_REG (PCI_CR_PR_OFFSET + 0x0034) +#define PCI_CR_SUBSYS_ID_REG (PCI_CR_PR_OFFSET + 0x0038) +#define PCI_CR_PCI_PM_REG (PCI_CR_PR_OFFSET + 0x003C) +#define PCI_CR_CLASS_CODE1_REG (PCI_CR_PR_OFFSET + 0x0040) +#define PCI_CR_BAR11MASK_REG (PCI_CR_PR_OFFSET + 0x0044) +#define PCI_CR_BAR12MASK_REG (PCI_CR_PR_OFFSET + 0x0048) +#define PCI_CR_BAR13MASK_REG (PCI_CR_PR_OFFSET + 0x004C) +#define PCI_CR_BAR14MASK_REG (PCI_CR_PR_OFFSET + 0x0050) +#define PCI_CR_BAR15MASK_REG (PCI_CR_PR_OFFSET + 0x0054) +#define PCI_CR_BAR16MASK_REG (PCI_CR_PR_OFFSET + 0x0058) +#define PCI_CR_CIS_PT1_REG (PCI_CR_PR_OFFSET + 0x005C) +#define PCI_CR_SUBSYS_ID1_REG (PCI_CR_PR_OFFSET + 0x0060) +#define PCI_CR_PCI_ADDR_MAP11_REG (PCI_CR_PR_OFFSET + 0x0064) +#define PCI_CR_PCI_ADDR_MAP12_REG (PCI_CR_PR_OFFSET + 0x0068) +#define PCI_CR_PCI_ADDR_MAP13_REG (PCI_CR_PR_OFFSET + 0x006C) +#define PCI_CR_PCI_ADDR_MAP14_REG (PCI_CR_PR_OFFSET + 0x0070) +#define PCI_CR_PCI_ADDR_MAP15_REG (PCI_CR_PR_OFFSET + 0x0074) +#define PCI_CR_PCI_ADDR_MAP16_REG (PCI_CR_PR_OFFSET + 0x0078) +#define PCI_CR_FPI_SEG_EN_REG (PCI_CR_PR_OFFSET + 0x007C) +#define PCI_CR_PC_ARB_REG (PCI_CR_PR_OFFSET + 0x0080) +#define PCI_CR_BAR21MASK_REG (PCI_CR_PR_OFFSET + 0x0084) +#define PCI_CR_BAR22MASK_REG (PCI_CR_PR_OFFSET + 0x0088) +#define PCI_CR_BAR23MASK_REG (PCI_CR_PR_OFFSET + 0x008C) +#define PCI_CR_BAR24MASK_REG (PCI_CR_PR_OFFSET + 0x0090) +#define PCI_CR_BAR25MASK_REG (PCI_CR_PR_OFFSET + 0x0094) +#define PCI_CR_BAR26MASK_REG (PCI_CR_PR_OFFSET + 0x0098) +#define PCI_CR_CIS_PT2_REG (PCI_CR_PR_OFFSET + 0x009C) +#define PCI_CR_SUBSYS_ID2_REG (PCI_CR_PR_OFFSET + 0x00A0) +#define PCI_CR_PCI_ADDR_MAP21_REG (PCI_CR_PR_OFFSET + 0x00A4) +#define PCI_CR_PCI_ADDR_MAP22_REG (PCI_CR_PR_OFFSET + 0x00A8) +#define PCI_CR_PCI_ADDR_MAP23_REG (PCI_CR_PR_OFFSET + 0x00AC) + + +/***********************************************************************/ +/* Module : MCD register address and bits */ +/***********************************************************************/ +#define DANUBE_MCD (KSEG1+0x1F106000) + +/***Manufacturer Identification Register***/ +#define DANUBE_MCD_MANID ((volatile u32*)(DANUBE_MCD+ 0x0024)) +#define DANUBE_MCD_MANID_MANUF(value) (((( 1 << 11) - 1) & (value)) << 5) + +/***Chip Identification Register***/ +#define DANUBE_MCD_CHIPID ((volatile u32*)(DANUBE_MCD+ 0x0028)) +#define DANUBE_MCD_CHIPID_VERSION_GET(value) (((value) >> 28) & ((1 << 4) - 1)) +#define DANUBE_MCD_CHIPID_VERSION_SET(value) (((( 1 << 4) - 1) & (value)) << 28) +#define DANUBE_MCD_CHIPID_PART_NUMBER_GET(value) (((value) >> 12) & ((1 << 16) - 1)) +#define DANUBE_MCD_CHIPID_PART_NUMBER_SET(value) (((( 1 << 16) - 1) & (value)) << 12) +#define DANUBE_MCD_CHIPID_MANID_GET(value) (((value) >> 1) & ((1 << 11) - 1)) +#define DANUBE_MCD_CHIPID_MANID_SET(value) (((( 1 << 11) - 1) & (value)) << 1) + +#define DANUBE_CHIPID_STANDARD 0x00EB +#define DANUBE_CHIPID_YANGTSE 0x00ED + +/***Redesign Tracing Identification Register***/ +#define DANUBE_MCD_RTID ((volatile u32*)(DANUBE_MCD+ 0x002C)) +#define DANUBE_MCD_RTID_LC (1 << 15) +#define DANUBE_MCD_RTID_RIX(value) (((( 1 << 3) - 1) & (value)) << 0) + + +/***********************************************************************/ +/* Module : EBU register address and bits */ +/***********************************************************************/ + +#define DANUBE_EBU (0xBE105300) +#define EBU_NAND_CON (volatile u32*)(DANUBE_EBU + 0xB0) +#define EBU_NAND_WAIT (volatile u32*)(DANUBE_EBU + 0xB4) +#define EBU_NAND_ECC0 (volatile u32*)(DANUBE_EBU + 0xB8) +#define EBU_NAND_ECC_AC (volatile u32*)(DANUBE_EBU + 0xBC) + +/***********************************************************************/ + + +/***EBU Clock Control Register***/ +#define DANUBE_EBU_CLC ((volatile u32*)(DANUBE_EBU+ 0x0000)) +#define DANUBE_EBU_CLC_DISS (1 << 1) +#define DANUBE_EBU_CLC_DISR (1 << 0) + +/***EBU Global Control Register***/ +#define DANUBE_EBU_CON ((volatile u32*)(DANUBE_EBU+ 0x0010)) +#define DANUBE_EBU_CON_DTACS (value) (((( 1 << 3) - 1) & (value)) << 20) +#define DANUBE_EBU_CON_DTARW (value) (((( 1 << 3) - 1) & (value)) << 16) +#define DANUBE_EBU_CON_TOUTC (value) (((( 1 << 8) - 1) & (value)) << 8) +#define DANUBE_EBU_CON_ARBMODE (value) (((( 1 << 2) - 1) & (value)) << 6) +#define DANUBE_EBU_CON_ARBSYNC (1 << 5) +#define DANUBE_EBU_CON_1 (1 << 3) + +/***EBU Address Select Register 0***/ +#define DANUBE_EBU_ADDSEL0 ((volatile u32*)(DANUBE_EBU+ 0x0020)) +#define DANUBE_EBU_ADDSEL0_BASE (value) (((( 1 << 20) - 1) & (value)) << 12) +#define DANUBE_EBU_ADDSEL0_MASK (value) (((( 1 << 4) - 1) & (value)) << 4) +#define DANUBE_EBU_ADDSEL0_MIRRORE (1 << 1) +#define DANUBE_EBU_ADDSEL0_REGEN (1 << 0) + +/***EBU Address Select Register 1***/ +#define DANUBE_EBU_ADDSEL1 ((volatile u32*)(DANUBE_EBU+ 0x0024)) +#define DANUBE_EBU_ADDSEL1_BASE (value) (((( 1 << 20) - 1) & (value)) << 12) +#define DANUBE_EBU_ADDSEL1_MASK (value) (((( 1 << 4) - 1) & (value)) << 4) +#define DANUBE_EBU_ADDSEL1_MIRRORE (1 << 1) +#define DANUBE_EBU_ADDSEL1_REGEN (1 << 0) + +/***EBU Address Select Register 2***/ +#define DANUBE_EBU_ADDSEL2 ((volatile u32*)(DANUBE_EBU+ 0x0028)) +#define DANUBE_EBU_ADDSEL2_BASE (value) (((( 1 << 20) - 1) & (value)) << 12) +#define DANUBE_EBU_ADDSEL2_MASK (value) (((( 1 << 4) - 1) & (value)) << 4) +#define DANUBE_EBU_ADDSEL2_MIRRORE (1 << 1) +#define DANUBE_EBU_ADDSEL2_REGEN (1 << 0) + +/***EBU Address Select Register 3***/ +#define DANUBE_EBU_ADDSEL3 ((volatile u32*)(DANUBE_EBU+ 0x002C)) +#define DANUBE_EBU_ADDSEL3_BASE (value) (((( 1 << 20) - 1) & (value)) << 12) +#define DANUBE_EBU_ADDSEL3_MASK (value) (((( 1 << 4) - 1) & (value)) << 4) +#define DANUBE_EBU_ADDSEL3_MIRRORE (1 << 1) +#define DANUBE_EBU_ADDSEL3_REGEN (1 << 0) + +/***EBU Bus Configuration Register 0***/ +#define DANUBE_EBU_BUSCON0 ((volatile u32*)(DANUBE_EBU+ 0x0060)) +#define DANUBE_EBU_BUSCON0_WRDIS (1 << 31) +#define DANUBE_EBU_BUSCON0_ALEC (value) (((( 1 << 2) - 1) & (value)) << 29) +#define DANUBE_EBU_BUSCON0_BCGEN (value) (((( 1 << 2) - 1) & (value)) << 27) +#define DANUBE_EBU_BUSCON0_AGEN (value) (((( 1 << 2) - 1) & (value)) << 24) +#define DANUBE_EBU_BUSCON0_CMULTR (value) (((( 1 << 2) - 1) & (value)) << 22) +#define DANUBE_EBU_BUSCON0_WAIT (value) (((( 1 << 2) - 1) & (value)) << 20) +#define DANUBE_EBU_BUSCON0_WAITINV (1 << 19) +#define DANUBE_EBU_BUSCON0_SETUP (1 << 18) +#define DANUBE_EBU_BUSCON0_PORTW (value) (((( 1 << 2) - 1) & (value)) << 16) +#define DANUBE_EBU_BUSCON0_WAITRDC (value) (((( 1 << 7) - 1) & (value)) << 9) +#define DANUBE_EBU_BUSCON0_WAITWRC (value) (((( 1 << 3) - 1) & (value)) << 6) +#define DANUBE_EBU_BUSCON0_HOLDC (value) (((( 1 << 2) - 1) & (value)) << 4) +#define DANUBE_EBU_BUSCON0_RECOVC (value) (((( 1 << 2) - 1) & (value)) << 2) +#define DANUBE_EBU_BUSCON0_CMULT (value) (((( 1 << 2) - 1) & (value)) << 0) + +/***EBU Bus Configuration Register 1***/ +#define DANUBE_EBU_BUSCON1 ((volatile u32*)(DANUBE_EBU+ 0x0064)) +#define DANUBE_EBU_BUSCON1_WRDIS (1 << 31) +#define DANUBE_EBU_BUSCON1_ALEC (value) (((( 1 << 2) - 1) & (value)) << 29) +#define DANUBE_EBU_BUSCON1_BCGEN (value) (((( 1 << 2) - 1) & (value)) << 27) +#define DANUBE_EBU_BUSCON1_AGEN (value) (((( 1 << 2) - 1) & (value)) << 24) +#define DANUBE_EBU_BUSCON1_CMULTR (value) (((( 1 << 2) - 1) & (value)) << 22) +#define DANUBE_EBU_BUSCON1_WAIT (value) (((( 1 << 2) - 1) & (value)) << 20) +#define DANUBE_EBU_BUSCON1_WAITINV (1 << 19) +#define DANUBE_EBU_BUSCON1_SETUP (1 << 18) +#define DANUBE_EBU_BUSCON1_PORTW (value) (((( 1 << 2) - 1) & (value)) << 16) +#define DANUBE_EBU_BUSCON1_WAITRDC (value) (((( 1 << 7) - 1) & (value)) << 9) +#define DANUBE_EBU_BUSCON1_WAITWRC (value) (((( 1 << 3) - 1) & (value)) << 6) +#define DANUBE_EBU_BUSCON1_HOLDC (value) (((( 1 << 2) - 1) & (value)) << 4) +#define DANUBE_EBU_BUSCON1_RECOVC (value) (((( 1 << 2) - 1) & (value)) << 2) +#define DANUBE_EBU_BUSCON1_CMULT (value) (((( 1 << 2) - 1) & (value)) << 0) + +/***EBU Bus Configuration Register 2***/ +#define DANUBE_EBU_BUSCON2 ((volatile u32*)(DANUBE_EBU+ 0x0068)) +#define DANUBE_EBU_BUSCON2_WRDIS (1 << 31) +#define DANUBE_EBU_BUSCON2_ALEC (value) (((( 1 << 2) - 1) & (value)) << 29) +#define DANUBE_EBU_BUSCON2_BCGEN (value) (((( 1 << 2) - 1) & (value)) << 27) +#define DANUBE_EBU_BUSCON2_AGEN (value) (((( 1 << 2) - 1) & (value)) << 24) +#define DANUBE_EBU_BUSCON2_CMULTR (value) (((( 1 << 2) - 1) & (value)) << 22) +#define DANUBE_EBU_BUSCON2_WAIT (value) (((( 1 << 2) - 1) & (value)) << 20) +#define DANUBE_EBU_BUSCON2_WAITINV (1 << 19) +#define DANUBE_EBU_BUSCON2_SETUP (1 << 18) +#define DANUBE_EBU_BUSCON2_PORTW (value) (((( 1 << 2) - 1) & (value)) << 16) +#define DANUBE_EBU_BUSCON2_WAITRDC (value) (((( 1 << 7) - 1) & (value)) << 9) +#define DANUBE_EBU_BUSCON2_WAITWRC (value) (((( 1 << 3) - 1) & (value)) << 6) +#define DANUBE_EBU_BUSCON2_HOLDC (value) (((( 1 << 2) - 1) & (value)) << 4) +#define DANUBE_EBU_BUSCON2_RECOVC (value) (((( 1 << 2) - 1) & (value)) << 2) +#define DANUBE_EBU_BUSCON2_CMULT (value) (((( 1 << 2) - 1) & (value)) << 0) + +/***********************************************************************/ +/* Module : SDRAM register address and bits */ +/***********************************************************************/ + +#define DANUBE_SDRAM (0xBF800000) +/***********************************************************************/ + + +/***MC Access Error Cause Register***/ +#define DANUBE_SDRAM_MC_ERRCAUSE ((volatile u32*)(DANUBE_SDRAM+ 0x0100)) +#define DANUBE_SDRAM_MC_ERRCAUSE_ERR (1 << 31) +#define DANUBE_SDRAM_MC_ERRCAUSE_PORT (value) (((( 1 << 4) - 1) & (value)) << 16) +#define DANUBE_SDRAM_MC_ERRCAUSE_CAUSE (value) (((( 1 << 2) - 1) & (value)) << 0) +#define DANUBE_SDRAM_MC_ERRCAUSE_Res (value) (((( 1 << NaN) - 1) & (value)) << NaN) + +/***MC Access Error Address Register***/ +#define DANUBE_SDRAM_MC_ERRADDR ((volatile u32*)(DANUBE_SDRAM+ 0x0108)) +#define DANUBE_SDRAM_MC_ERRADDR_ADDR + +/***MC I/O General Purpose Register***/ +#define DANUBE_SDRAM_MC_IOGP ((volatile u32*)(DANUBE_SDRAM+ 0x0800)) +#define DANUBE_SDRAM_MC_IOGP_GPR6 (value) (((( 1 << 4) - 1) & (value)) << 28) +#define DANUBE_SDRAM_MC_IOGP_GPR5 (value) (((( 1 << 4) - 1) & (value)) << 24) +#define DANUBE_SDRAM_MC_IOGP_GPR4 (value) (((( 1 << 4) - 1) & (value)) << 20) +#define DANUBE_SDRAM_MC_IOGP_GPR3 (value) (((( 1 << 4) - 1) & (value)) << 16) +#define DANUBE_SDRAM_MC_IOGP_GPR2 (value) (((( 1 << 4) - 1) & (value)) << 12) +#define DANUBE_SDRAM_MC_IOGP_CPS (1 << 11) +#define DANUBE_SDRAM_MC_IOGP_CLKDELAY (value) (((( 1 << 3) - 1) & (value)) << 8) +#define DANUBE_SDRAM_MC_IOGP_CLKRAT (value) (((( 1 << 4) - 1) & (value)) << 4) +#define DANUBE_SDRAM_MC_IOGP_RDDEL (value) (((( 1 << 4) - 1) & (value)) << 0) + +/***MC Self Refresh Register***/ +#define DANUBE_SDRAM_MC_SELFRFSH ((volatile u32*)(DANUBE_SDRAM+ 0x0A00)) +#define DANUBE_SDRAM_MC_SELFRFSH_PWDS (1 << 1) +#define DANUBE_SDRAM_MC_SELFRFSH_PWD (1 << 0) +#define DANUBE_SDRAM_MC_SELFRFSH_Res (value) (((( 1 << 30) - 1) & (value)) << 2) + +/***MC Enable Register***/ +#define DANUBE_SDRAM_MC_CTRLENA ((volatile u32*)(DANUBE_SDRAM+ 0x1000)) +#define DANUBE_SDRAM_MC_CTRLENA_ENA (1 << 0) +#define DANUBE_SDRAM_MC_CTRLENA_Res (value) (((( 1 << 31) - 1) & (value)) << 1) + +/***MC Mode Register Setup Code***/ +#define DANUBE_SDRAM_MC_MRSCODE ((volatile u32*)(DANUBE_SDRAM+ 0x1008)) +#define DANUBE_SDRAM_MC_MRSCODE_UMC (value) (((( 1 << 5) - 1) & (value)) << 7) +#define DANUBE_SDRAM_MC_MRSCODE_CL (value) (((( 1 << 3) - 1) & (value)) << 4) +#define DANUBE_SDRAM_MC_MRSCODE_WT (1 << 3) +#define DANUBE_SDRAM_MC_MRSCODE_BL (value) (((( 1 << 3) - 1) & (value)) << 0) + +/***MC Configuration Data-word Width Register***/ +#define DANUBE_SDRAM_MC_CFGDW ((volatile u32*)(DANUBE_SDRAM+ 0x1010)) +#define DANUBE_SDRAM_MC_CFGDW_DW (value) (((( 1 << 4) - 1) & (value)) << 0) +#define DANUBE_SDRAM_MC_CFGDW_Res (value) (((( 1 << 28) - 1) & (value)) << 4) + +/***MC Configuration Physical Bank 0 Register***/ +#define DANUBE_SDRAM_MC_CFGPB0 ((volatile u32*)(DANUBE_SDRAM+ 0x1018)) +#define DANUBE_SDRAM_MC_CFGPB0_MCSEN0 (value) (((( 1 << 4) - 1) & (value)) << 12) +#define DANUBE_SDRAM_MC_CFGPB0_BANKN0 (value) (((( 1 << 4) - 1) & (value)) << 8) +#define DANUBE_SDRAM_MC_CFGPB0_ROWW0 (value) (((( 1 << 4) - 1) & (value)) << 4) +#define DANUBE_SDRAM_MC_CFGPB0_COLW0 (value) (((( 1 << 4) - 1) & (value)) << 0) +#define DANUBE_SDRAM_MC_CFGPB0_Res (value) (((( 1 << 16) - 1) & (value)) << 16) + +/***MC Latency Register***/ +#define DANUBE_SDRAM_MC_LATENCY ((volatile u32*)(DANUBE_SDRAM+ 0x1038)) +#define DANUBE_SDRAM_MC_LATENCY_TRP (value) (((( 1 << 4) - 1) & (value)) << 16) +#define DANUBE_SDRAM_MC_LATENCY_TRAS (value) (((( 1 << 4) - 1) & (value)) << 12) +#define DANUBE_SDRAM_MC_LATENCY_TRCD (value) (((( 1 << 4) - 1) & (value)) << 8) +#define DANUBE_SDRAM_MC_LATENCY_TDPL (value) (((( 1 << 4) - 1) & (value)) << 4) +#define DANUBE_SDRAM_MC_LATENCY_TDAL (value) (((( 1 << 4) - 1) & (value)) << 0) +#define DANUBE_SDRAM_MC_LATENCY_Res (value) (((( 1 << 12) - 1) & (value)) << 20) + +/***MC Refresh Cycle Time Register***/ +#define DANUBE_SDRAM_MC_TREFRESH ((volatile u32*)(DANUBE_SDRAM+ 0x1040)) +#define DANUBE_SDRAM_MC_TREFRESH_TREF (value) (((( 1 << 13) - 1) & (value)) << 0) +#define DANUBE_SDRAM_MC_TREFRESH_Res (value) (((( 1 << 19) - 1) & (value)) << 13) + + +/***********************************************************************/ +/* Module : GPTU register address and bits */ +/***********************************************************************/ + +#define DANUBE_GPTU (0xB8000300) +/***********************************************************************/ + + +/***GPT Clock Control Register***/ +#define DANUBE_GPTU_GPT_CLC ((volatile u32*)(DANUBE_GPTU+ 0x0000)) +#define DANUBE_GPTU_GPT_CLC_RMC (value) (((( 1 << 8) - 1) & (value)) << 8) +#define DANUBE_GPTU_GPT_CLC_DISS (1 << 1) +#define DANUBE_GPTU_GPT_CLC_DISR (1 << 0) + +/***GPT Timer 3 Control Register***/ +#define DANUBE_GPTU_GPT_T3CON ((volatile u32*)(DANUBE_GPTU+ 0x0014)) +#define DANUBE_GPTU_GPT_T3CON_T3RDIR (1 << 15) +#define DANUBE_GPTU_GPT_T3CON_T3CHDIR (1 << 14) +#define DANUBE_GPTU_GPT_T3CON_T3EDGE (1 << 13) +#define DANUBE_GPTU_GPT_T3CON_BPS1 (value) (((( 1 << 2) - 1) & (value)) << 11) +#define DANUBE_GPTU_GPT_T3CON_T3OTL (1 << 10) +#define DANUBE_GPTU_GPT_T3CON_T3UD (1 << 7) +#define DANUBE_GPTU_GPT_T3CON_T3R (1 << 6) +#define DANUBE_GPTU_GPT_T3CON_T3M (value) (((( 1 << 3) - 1) & (value)) << 3) +#define DANUBE_GPTU_GPT_T3CON_T3I (value) (((( 1 << 3) - 1) & (value)) << 0) + +/***GPT Write Hardware Modified Timer 3 Control Register +If set and clear bit are written concurrently with 1, the associated bit is not changed.***/ +#define DANUBE_GPTU_GPT_WHBT3CON ((volatile u32*)(DANUBE_GPTU+ 0x004C)) +#define DANUBE_GPTU_GPT_WHBT3CON_SETT3CHDIR (1 << 15) +#define DANUBE_GPTU_GPT_WHBT3CON_CLRT3CHDIR (1 << 14) +#define DANUBE_GPTU_GPT_WHBT3CON_SETT3EDGE (1 << 13) +#define DANUBE_GPTU_GPT_WHBT3CON_CLRT3EDGE (1 << 12) +#define DANUBE_GPTU_GPT_WHBT3CON_SETT3OTL (1 << 11) +#define DANUBE_GPTU_GPT_WHBT3CON_CLRT3OTL (1 << 10) + +/***GPT Timer 2 Control Register***/ +#define DANUBE_GPTU_GPT_T2CON ((volatile u32*)(DANUBE_GPTU+ 0x0010)) +#define DANUBE_GPTU_GPT_T2CON_TxRDIR (1 << 15) +#define DANUBE_GPTU_GPT_T2CON_TxCHDIR (1 << 14) +#define DANUBE_GPTU_GPT_T2CON_TxEDGE (1 << 13) +#define DANUBE_GPTU_GPT_T2CON_TxIRDIS (1 << 12) +#define DANUBE_GPTU_GPT_T2CON_TxRC (1 << 9) +#define DANUBE_GPTU_GPT_T2CON_TxUD (1 << 7) +#define DANUBE_GPTU_GPT_T2CON_TxR (1 << 6) +#define DANUBE_GPTU_GPT_T2CON_TxM (value) (((( 1 << 3) - 1) & (value)) << 3) +#define DANUBE_GPTU_GPT_T2CON_TxI (value) (((( 1 << 3) - 1) & (value)) << 0) + +/***GPT Timer 4 Control Register***/ +#define DANUBE_GPTU_GPT_T4CON ((volatile u32*)(DANUBE_GPTU+ 0x0018)) +#define DANUBE_GPTU_GPT_T4CON_TxRDIR (1 << 15) +#define DANUBE_GPTU_GPT_T4CON_TxCHDIR (1 << 14) +#define DANUBE_GPTU_GPT_T4CON_TxEDGE (1 << 13) +#define DANUBE_GPTU_GPT_T4CON_TxIRDIS (1 << 12) +#define DANUBE_GPTU_GPT_T4CON_TxRC (1 << 9) +#define DANUBE_GPTU_GPT_T4CON_TxUD (1 << 7) +#define DANUBE_GPTU_GPT_T4CON_TxR (1 << 6) +#define DANUBE_GPTU_GPT_T4CON_TxM (value) (((( 1 << 3) - 1) & (value)) << 3) +#define DANUBE_GPTU_GPT_T4CON_TxI (value) (((( 1 << 3) - 1) & (value)) << 0) + +/***GPT Write HW Modified Timer 2 Control Register If set + and clear bit are written concurrently with 1, the associated bit is not changed.***/ +#define DANUBE_GPTU_GPT_WHBT2CON ((volatile u32*)(DANUBE_GPTU+ 0x0048)) +#define DANUBE_GPTU_GPT_WHBT2CON_SETTxCHDIR (1 << 15) +#define DANUBE_GPTU_GPT_WHBT2CON_CLRTxCHDIR (1 << 14) +#define DANUBE_GPTU_GPT_WHBT2CON_SETTxEDGE (1 << 13) +#define DANUBE_GPTU_GPT_WHBT2CON_CLRTxEDGE (1 << 12) + +/***GPT Write HW Modified Timer 4 Control Register If set + and clear bit are written concurrently with 1, the associated bit is not changed.***/ +#define DANUBE_GPTU_GPT_WHBT4CON ((volatile u32*)(DANUBE_GPTU+ 0x0050)) +#define DANUBE_GPTU_GPT_WHBT4CON_SETTxCHDIR (1 << 15) +#define DANUBE_GPTU_GPT_WHBT4CON_CLRTxCHDIR (1 << 14) +#define DANUBE_GPTU_GPT_WHBT4CON_SETTxEDGE (1 << 13) +#define DANUBE_GPTU_GPT_WHBT4CON_CLRTxEDGE (1 << 12) + +/***GPT Capture Reload Register***/ +#define DANUBE_GPTU_GPT_CAPREL ((volatile u32*)(DANUBE_GPTU+ 0x0030)) +#define DANUBE_GPTU_GPT_CAPREL_CAPREL (value) (((( 1 << 16) - 1) & (value)) << 0) + +/***GPT Timer 2 Register***/ +#define DANUBE_GPTU_GPT_T2 ((volatile u32*)(DANUBE_GPTU+ 0x0034)) +#define DANUBE_GPTU_GPT_T2_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0) + +/***GPT Timer 3 Register***/ +#define DANUBE_GPTU_GPT_T3 ((volatile u32*)(DANUBE_GPTU+ 0x0038)) +#define DANUBE_GPTU_GPT_T3_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0) + +/***GPT Timer 4 Register***/ +#define DANUBE_GPTU_GPT_T4 ((volatile u32*)(DANUBE_GPTU+ 0x003C)) +#define DANUBE_GPTU_GPT_T4_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0) + +/***GPT Timer 5 Register***/ +#define DANUBE_GPTU_GPT_T5 ((volatile u32*)(DANUBE_GPTU+ 0x0040)) +#define DANUBE_GPTU_GPT_T5_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0) + +/***GPT Timer 6 Register***/ +#define DANUBE_GPTU_GPT_T6 ((volatile u32*)(DANUBE_GPTU+ 0x0044)) +#define DANUBE_GPTU_GPT_T6_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0) + +/***GPT Timer 6 Control Register***/ +#define DANUBE_GPTU_GPT_T6CON ((volatile u32*)(DANUBE_GPTU+ 0x0020)) +#define DANUBE_GPTU_GPT_T6CON_T6SR (1 << 15) +#define DANUBE_GPTU_GPT_T6CON_T6CLR (1 << 14) +#define DANUBE_GPTU_GPT_T6CON_BPS2 (value) (((( 1 << 2) - 1) & (value)) << 11) +#define DANUBE_GPTU_GPT_T6CON_T6OTL (1 << 10) +#define DANUBE_GPTU_GPT_T6CON_T6UD (1 << 7) +#define DANUBE_GPTU_GPT_T6CON_T6R (1 << 6) +#define DANUBE_GPTU_GPT_T6CON_T6M (value) (((( 1 << 3) - 1) & (value)) << 3) +#define DANUBE_GPTU_GPT_T6CON_T6I (value) (((( 1 << 3) - 1) & (value)) << 0) + +/***GPT Write HW Modified Timer 6 Control Register If set + and clear bit are written concurrently with 1, the associated bit is not changed.***/ +#define DANUBE_GPTU_GPT_WHBT6CON ((volatile u32*)(DANUBE_GPTU+ 0x0054)) +#define DANUBE_GPTU_GPT_WHBT6CON_SETT6OTL (1 << 11) +#define DANUBE_GPTU_GPT_WHBT6CON_CLRT6OTL (1 << 10) + +/***GPT Timer 5 Control Register***/ +#define DANUBE_GPTU_GPT_T5CON ((volatile u32*)(DANUBE_GPTU+ 0x001C)) +#define DANUBE_GPTU_GPT_T5CON_T5SC (1 << 15) +#define DANUBE_GPTU_GPT_T5CON_T5CLR (1 << 14) +#define DANUBE_GPTU_GPT_T5CON_CI (value) (((( 1 << 2) - 1) & (value)) << 12) +#define DANUBE_GPTU_GPT_T5CON_T5CC (1 << 11) +#define DANUBE_GPTU_GPT_T5CON_CT3 (1 << 10) +#define DANUBE_GPTU_GPT_T5CON_T5RC (1 << 9) +#define DANUBE_GPTU_GPT_T5CON_T5UDE (1 << 8) +#define DANUBE_GPTU_GPT_T5CON_T5UD (1 << 7) +#define DANUBE_GPTU_GPT_T5CON_T5R (1 << 6) +#define DANUBE_GPTU_GPT_T5CON_T5M (value) (((( 1 << 3) - 1) & (value)) << 3) +#define DANUBE_GPTU_GPT_T5CON_T5I (value) (((( 1 << 3) - 1) & (value)) << 0) + + +/***********************************************************************/ +/* Module : IOM register address and bits */ +/***********************************************************************/ + +#define DANUBE_IOM (0xBF105000) +/***********************************************************************/ + + +/***Receive FIFO***/ +#define DANUBE_IOM_RFIFO ((volatile u32*)(DANUBE_IOM+ 0x0000)) +#define DANUBE_IOM_RFIFO_RXD (value) (((( 1 << 8) - 1) & (value)) << 0) + +/***Transmit FIFO***/ +#define DANUBE_IOM_XFIFO ((volatile u32*)(DANUBE_IOM+ 0x0000)) +#define DANUBE_IOM_XFIFO_TXD (value) (((( 1 << 8) - 1) & (value)) << 0) + +/***Interrupt Status Register HDLC***/ +#define DANUBE_IOM_ISTAH ((volatile u32*)(DANUBE_IOM+ 0x0080)) +#define DANUBE_IOM_ISTAH_RME (1 << 7) +#define DANUBE_IOM_ISTAH_RPF (1 << 6) +#define DANUBE_IOM_ISTAH_RFO (1 << 5) +#define DANUBE_IOM_ISTAH_XPR (1 << 4) +#define DANUBE_IOM_ISTAH_XMR (1 << 3) +#define DANUBE_IOM_ISTAH_XDU (1 << 2) + +/***Interrupt Mask Register HDLC***/ +#define DANUBE_IOM_MASKH ((volatile u32*)(DANUBE_IOM+ 0x0080)) +#define DANUBE_IOM_MASKH_RME (1 << 7) +#define DANUBE_IOM_MASKH_RPF (1 << 6) +#define DANUBE_IOM_MASKH_RFO (1 << 5) +#define DANUBE_IOM_MASKH_XPR (1 << 4) +#define DANUBE_IOM_MASKH_XMR (1 << 3) +#define DANUBE_IOM_MASKH_XDU (1 << 2) + +/***Status Register***/ +#define DANUBE_IOM_STAR ((volatile u32*)(DANUBE_IOM+ 0x0084)) +#define DANUBE_IOM_STAR_XDOV (1 << 7) +#define DANUBE_IOM_STAR_XFW (1 << 6) +#define DANUBE_IOM_STAR_RACI (1 << 3) +#define DANUBE_IOM_STAR_XACI (1 << 1) + +/***Command Register***/ +#define DANUBE_IOM_CMDR ((volatile u32*)(DANUBE_IOM+ 0x0084)) +#define DANUBE_IOM_CMDR_RMC (1 << 7) +#define DANUBE_IOM_CMDR_RRES (1 << 6) +#define DANUBE_IOM_CMDR_XTF (1 << 3) +#define DANUBE_IOM_CMDR_XME (1 << 1) +#define DANUBE_IOM_CMDR_XRES (1 << 0) + +/***Mode Register***/ +#define DANUBE_IOM_MODEH ((volatile u32*)(DANUBE_IOM+ 0x0088)) +#define DANUBE_IOM_MODEH_MDS2 (1 << 7) +#define DANUBE_IOM_MODEH_MDS1 (1 << 6) +#define DANUBE_IOM_MODEH_MDS0 (1 << 5) +#define DANUBE_IOM_MODEH_RAC (1 << 3) +#define DANUBE_IOM_MODEH_DIM2 (1 << 2) +#define DANUBE_IOM_MODEH_DIM1 (1 << 1) +#define DANUBE_IOM_MODEH_DIM0 (1 << 0) + +/***Extended Mode Register***/ +#define DANUBE_IOM_EXMR ((volatile u32*)(DANUBE_IOM+ 0x008C)) +#define DANUBE_IOM_EXMR_XFBS (1 << 7) +#define DANUBE_IOM_EXMR_RFBS (value) (((( 1 << 2) - 1) & (value)) << 5) +#define DANUBE_IOM_EXMR_SRA (1 << 4) +#define DANUBE_IOM_EXMR_XCRC (1 << 3) +#define DANUBE_IOM_EXMR_RCRC (1 << 2) +#define DANUBE_IOM_EXMR_ITF (1 << 0) + +/***SAPI1 Register***/ +#define DANUBE_IOM_SAP1 ((volatile u32*)(DANUBE_IOM+ 0x0094)) +#define DANUBE_IOM_SAP1_SAPI1 (value) (((( 1 << 6) - 1) & (value)) << 2) +#define DANUBE_IOM_SAP1_MHA (1 << 0) + +/***Receive Frame Byte Count Low***/ +#define DANUBE_IOM_RBCL ((volatile u32*)(DANUBE_IOM+ 0x0098)) +#define DANUBE_IOM_RBCL_RBC(value) (1 << value) + + +/***SAPI2 Register***/ +#define DANUBE_IOM_SAP2 ((volatile u32*)(DANUBE_IOM+ 0x0098)) +#define DANUBE_IOM_SAP2_SAPI2 (value) (((( 1 << 6) - 1) & (value)) << 2) +#define DANUBE_IOM_SAP2_MLA (1 << 0) + +/***Receive Frame Byte Count High***/ +#define DANUBE_IOM_RBCH ((volatile u32*)(DANUBE_IOM+ 0x009C)) +#define DANUBE_IOM_RBCH_OV (1 << 4) +#define DANUBE_IOM_RBCH_RBC11 (1 << 3) +#define DANUBE_IOM_RBCH_RBC10 (1 << 2) +#define DANUBE_IOM_RBCH_RBC9 (1 << 1) +#define DANUBE_IOM_RBCH_RBC8 (1 << 0) + +/***TEI1 Register 1***/ +#define DANUBE_IOM_TEI1 ((volatile u32*)(DANUBE_IOM+ 0x009C)) +#define DANUBE_IOM_TEI1_TEI1 (value) (((( 1 << 7) - 1) & (value)) << 1) +#define DANUBE_IOM_TEI1_EA (1 << 0) + +/***Receive Status Register***/ +#define DANUBE_IOM_RSTA ((volatile u32*)(DANUBE_IOM+ 0x00A0)) +#define DANUBE_IOM_RSTA_VFR (1 << 7) +#define DANUBE_IOM_RSTA_RDO (1 << 6) +#define DANUBE_IOM_RSTA_CRC (1 << 5) +#define DANUBE_IOM_RSTA_RAB (1 << 4) +#define DANUBE_IOM_RSTA_SA1 (1 << 3) +#define DANUBE_IOM_RSTA_SA0 (1 << 2) +#define DANUBE_IOM_RSTA_TA (1 << 0) +#define DANUBE_IOM_RSTA_CR (1 << 1) + +/***TEI2 Register***/ +#define DANUBE_IOM_TEI2 ((volatile u32*)(DANUBE_IOM+ 0x00A0)) +#define DANUBE_IOM_TEI2_TEI2 (value) (((( 1 << 7) - 1) & (value)) << 1) +#define DANUBE_IOM_TEI2_EA (1 << 0) + +/***Test Mode Register HDLC***/ +#define DANUBE_IOM_TMH ((volatile u32*)(DANUBE_IOM+ 0x00A4)) +#define DANUBE_IOM_TMH_TLP (1 << 0) + +/***Command/Indication Receive 0***/ +#define DANUBE_IOM_CIR0 ((volatile u32*)(DANUBE_IOM+ 0x00B8)) +#define DANUBE_IOM_CIR0_CODR0 (value) (((( 1 << 4) - 1) & (value)) << 4) +#define DANUBE_IOM_CIR0_CIC0 (1 << 3) +#define DANUBE_IOM_CIR0_CIC1 (1 << 2) +#define DANUBE_IOM_CIR0_SG (1 << 1) +#define DANUBE_IOM_CIR0_BAS (1 << 0) + +/***Command/Indication Transmit 0***/ +#define DANUBE_IOM_CIX0 ((volatile u32*)(DANUBE_IOM+ 0x00B8)) +#define DANUBE_IOM_CIX0_CODX0 (value) (((( 1 << 4) - 1) & (value)) << 4) +#define DANUBE_IOM_CIX0_TBA2 (1 << 3) +#define DANUBE_IOM_CIX0_TBA1 (1 << 2) +#define DANUBE_IOM_CIX0_TBA0 (1 << 1) +#define DANUBE_IOM_CIX0_BAC (1 << 0) + +/***Command/Indication Receive 1***/ +#define DANUBE_IOM_CIR1 ((volatile u32*)(DANUBE_IOM+ 0x00BC)) +#define DANUBE_IOM_CIR1_CODR1 (value) (((( 1 << 6) - 1) & (value)) << 2) + +/***Command/Indication Transmit 1***/ +#define DANUBE_IOM_CIX1 ((volatile u32*)(DANUBE_IOM+ 0x00BC)) +#define DANUBE_IOM_CIX1_CODX1 (value) (((( 1 << 6) - 1) & (value)) << 2) +#define DANUBE_IOM_CIX1_CICW (1 << 1) +#define DANUBE_IOM_CIX1_CI1E (1 << 0) + +/***Controller Data Access Reg. (CH10)***/ +#define DANUBE_IOM_CDA10 ((volatile u32*)(DANUBE_IOM+ 0x0100)) +#define DANUBE_IOM_CDA10_CDA (value) (((( 1 << 8) - 1) & (value)) << 0) + +/***Controller Data Access Reg. (CH11)***/ +#define DANUBE_IOM_CDA11 ((volatile u32*)(DANUBE_IOM+ 0x0104)) +#define DANUBE_IOM_CDA11_CDA (value) (((( 1 << 8) - 1) & (value)) << 0) + +/***Controller Data Access Reg. (CH20)***/ +#define DANUBE_IOM_CDA20 ((volatile u32*)(DANUBE_IOM+ 0x0108)) +#define DANUBE_IOM_CDA20_CDA (value) (((( 1 << 8) - 1) & (value)) << 0) + +/***Controller Data Access Reg. (CH21)***/ +#define DANUBE_IOM_CDA21 ((volatile u32*)(DANUBE_IOM+ 0x010C)) +#define DANUBE_IOM_CDA21_CDA (value) (((( 1 << 8) - 1) & (value)) << 0) + +/***Time Slot and Data Port Sel. (CH10)***/ +#define DANUBE_IOM_CDA_TSDP10 ((volatile u32*)(DANUBE_IOM+ 0x0110)) +#define DANUBE_IOM_CDA_TSDP10_DPS (1 << 7) +#define DANUBE_IOM_CDA_TSDP10_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) + +/***Time Slot and Data Port Sel. (CH11)***/ +#define DANUBE_IOM_CDA_TSDP11 ((volatile u32*)(DANUBE_IOM+ 0x0114)) +#define DANUBE_IOM_CDA_TSDP11_DPS (1 << 7) +#define DANUBE_IOM_CDA_TSDP11_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) + +/***Time Slot and Data Port Sel. (CH20)***/ +#define DANUBE_IOM_CDA_TSDP20 ((volatile u32*)(DANUBE_IOM+ 0x0118)) +#define DANUBE_IOM_CDA_TSDP20_DPS (1 << 7) +#define DANUBE_IOM_CDA_TSDP20_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) + +/***Time Slot and Data Port Sel. (CH21)***/ +#define DANUBE_IOM_CDA_TSDP21 ((volatile u32*)(DANUBE_IOM+ 0x011C)) +#define DANUBE_IOM_CDA_TSDP21_DPS (1 << 7) +#define DANUBE_IOM_CDA_TSDP21_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) + +/***Time Slot and Data Port Sel. (CH10)***/ +#define DANUBE_IOM_CO_TSDP10 ((volatile u32*)(DANUBE_IOM+ 0x0120)) +#define DANUBE_IOM_CO_TSDP10_DPS (1 << 7) +#define DANUBE_IOM_CO_TSDP10_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) + +/***Time Slot and Data Port Sel. (CH11)***/ +#define DANUBE_IOM_CO_TSDP11 ((volatile u32*)(DANUBE_IOM+ 0x0124)) +#define DANUBE_IOM_CO_TSDP11_DPS (1 << 7) +#define DANUBE_IOM_CO_TSDP11_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) + +/***Time Slot and Data Port Sel. (CH20)***/ +#define DANUBE_IOM_CO_TSDP20 ((volatile u32*)(DANUBE_IOM+ 0x0128)) +#define DANUBE_IOM_CO_TSDP20_DPS (1 << 7) +#define DANUBE_IOM_CO_TSDP20_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) + +/***Time Slot and Data Port Sel. (CH21)***/ +#define DANUBE_IOM_CO_TSDP21 ((volatile u32*)(DANUBE_IOM+ 0x012C)) +#define DANUBE_IOM_CO_TSDP21_DPS (1 << 7) +#define DANUBE_IOM_CO_TSDP21_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) + +/***Ctrl. Reg. Contr. Data Access CH1x***/ +#define DANUBE_IOM_CDA1_CR ((volatile u32*)(DANUBE_IOM+ 0x0138)) +#define DANUBE_IOM_CDA1_CR_EN_TBM (1 << 5) +#define DANUBE_IOM_CDA1_CR_EN_I1 (1 << 4) +#define DANUBE_IOM_CDA1_CR_EN_I0 (1 << 3) +#define DANUBE_IOM_CDA1_CR_EN_O1 (1 << 2) +#define DANUBE_IOM_CDA1_CR_EN_O0 (1 << 1) +#define DANUBE_IOM_CDA1_CR_SWAP (1 << 0) + +/***Ctrl. Reg. Contr. Data Access CH1x***/ +#define DANUBE_IOM_CDA2_CR ((volatile u32*)(DANUBE_IOM+ 0x013C)) +#define DANUBE_IOM_CDA2_CR_EN_TBM (1 << 5) +#define DANUBE_IOM_CDA2_CR_EN_I1 (1 << 4) +#define DANUBE_IOM_CDA2_CR_EN_I0 (1 << 3) +#define DANUBE_IOM_CDA2_CR_EN_O1 (1 << 2) +#define DANUBE_IOM_CDA2_CR_EN_O0 (1 << 1) +#define DANUBE_IOM_CDA2_CR_SWAP (1 << 0) + +/***Control Register B-Channel Data***/ +#define DANUBE_IOM_BCHA_CR ((volatile u32*)(DANUBE_IOM+ 0x0144)) +#define DANUBE_IOM_BCHA_CR_EN_BC2 (1 << 4) +#define DANUBE_IOM_BCHA_CR_EN_BC1 (1 << 3) + +/***Control Register B-Channel Data***/ +#define DANUBE_IOM_BCHB_CR ((volatile u32*)(DANUBE_IOM+ 0x0148)) +#define DANUBE_IOM_BCHB_CR_EN_BC2 (1 << 4) +#define DANUBE_IOM_BCHB_CR_EN_BC1 (1 << 3) + +/***Control Reg. for HDLC and CI1 Data***/ +#define DANUBE_IOM_DCI_CR ((volatile u32*)(DANUBE_IOM+ 0x014C)) +#define DANUBE_IOM_DCI_CR_DPS_CI1 (1 << 7) +#define DANUBE_IOM_DCI_CR_EN_CI1 (1 << 6) +#define DANUBE_IOM_DCI_CR_EN_D (1 << 5) + +/***Control Reg. for HDLC and CI1 Data***/ +#define DANUBE_IOM_DCIC_CR ((volatile u32*)(DANUBE_IOM+ 0x014C)) +#define DANUBE_IOM_DCIC_CR_DPS_CI0 (1 << 7) +#define DANUBE_IOM_DCIC_CR_EN_CI0 (1 << 6) +#define DANUBE_IOM_DCIC_CR_DPS_D (1 << 5) + +/***Control Reg. Serial Data Strobe x***/ +#define DANUBE_IOM_SDS_CR ((volatile u32*)(DANUBE_IOM+ 0x0154)) +#define DANUBE_IOM_SDS_CR_ENS_TSS (1 << 7) +#define DANUBE_IOM_SDS_CR_ENS_TSS_1 (1 << 6) +#define DANUBE_IOM_SDS_CR_ENS_TSS_3 (1 << 5) +#define DANUBE_IOM_SDS_CR_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) + +/***Control Register IOM Data***/ +#define DANUBE_IOM_IOM_CR ((volatile u32*)(DANUBE_IOM+ 0x015C)) +#define DANUBE_IOM_IOM_CR_SPU (1 << 7) +#define DANUBE_IOM_IOM_CR_CI_CS (1 << 5) +#define DANUBE_IOM_IOM_CR_TIC_DIS (1 << 4) +#define DANUBE_IOM_IOM_CR_EN_BCL (1 << 3) +#define DANUBE_IOM_IOM_CR_CLKM (1 << 2) +#define DANUBE_IOM_IOM_CR_Res (1 << 1) +#define DANUBE_IOM_IOM_CR_DIS_IOM (1 << 0) + +/***Synchronous Transfer Interrupt***/ +#define DANUBE_IOM_STI ((volatile u32*)(DANUBE_IOM+ 0x0160)) +#define DANUBE_IOM_STI_STOV21 (1 << 7) +#define DANUBE_IOM_STI_STOV20 (1 << 6) +#define DANUBE_IOM_STI_STOV11 (1 << 5) +#define DANUBE_IOM_STI_STOV10 (1 << 4) +#define DANUBE_IOM_STI_STI21 (1 << 3) +#define DANUBE_IOM_STI_STI20 (1 << 2) +#define DANUBE_IOM_STI_STI11 (1 << 1) +#define DANUBE_IOM_STI_STI10 (1 << 0) + +/***Acknowledge Synchronous Transfer Interrupt***/ +#define DANUBE_IOM_ASTI ((volatile u32*)(DANUBE_IOM+ 0x0160)) +#define DANUBE_IOM_ASTI_ACK21 (1 << 3) +#define DANUBE_IOM_ASTI_ACK20 (1 << 2) +#define DANUBE_IOM_ASTI_ACK11 (1 << 1) +#define DANUBE_IOM_ASTI_ACK10 (1 << 0) + +/***Mask Synchronous Transfer Interrupt***/ +#define DANUBE_IOM_MSTI ((volatile u32*)(DANUBE_IOM+ 0x0164)) +#define DANUBE_IOM_MSTI_STOV21 (1 << 7) +#define DANUBE_IOM_MSTI_STOV20 (1 << 6) +#define DANUBE_IOM_MSTI_STOV11 (1 << 5) +#define DANUBE_IOM_MSTI_STOV10 (1 << 4) +#define DANUBE_IOM_MSTI_STI21 (1 << 3) +#define DANUBE_IOM_MSTI_STI20 (1 << 2) +#define DANUBE_IOM_MSTI_STI11 (1 << 1) +#define DANUBE_IOM_MSTI_STI10 (1 << 0) + +/***Configuration Register for Serial Data Strobes***/ +#define DANUBE_IOM_SDS_CONF ((volatile u32*)(DANUBE_IOM+ 0x0168)) +#define DANUBE_IOM_SDS_CONF_SDS_BCL (1 << 0) + +/***Monitoring CDA Bits***/ +#define DANUBE_IOM_MCDA ((volatile u32*)(DANUBE_IOM+ 0x016C)) +#define DANUBE_IOM_MCDA_MCDA21 (value) (((( 1 << 2) - 1) & (value)) << 6) +#define DANUBE_IOM_MCDA_MCDA20 (value) (((( 1 << 2) - 1) & (value)) << 4) +#define DANUBE_IOM_MCDA_MCDA11 (value) (((( 1 << 2) - 1) & (value)) << 2) +#define DANUBE_IOM_MCDA_MCDA10 (value) (((( 1 << 2) - 1) & (value)) << 0) + +/***********************************************************************/ +/* Module : ASC0 register address and bits */ +/***********************************************************************/ +#define DANUBE_ASC0 (KSEG1+0x1E100400) +/***********************************************************************/ +#define DANUBE_ASC0_TBUF ((volatile u32*)(DANUBE_ASC0 + 0x0020)) +#define DANUBE_ASC0_RBUF ((volatile u32*)(DANUBE_ASC0 + 0x0024)) +#define DANUBE_ASC0_FSTAT ((volatile u32*)(DANUBE_ASC0 + 0x0048)) +#define DANUBE_ASC0_FSTAT_TXFREE_GET(value) (((value) >> 24) & ((1 << 6) - 1)) +#define DANUBE_ASC0_FSTAT_TXFREE_SET(value) (((( 1 << 6) - 1) & (value)) << 24) +#define DANUBE_ASC0_FSTAT_RXFREE_GET(value) (((value) >> 16) & ((1 << 6) - 1)) +#define DANUBE_ASC0_FSTAT_RXFREE_SET(value) (((( 1 << 6) - 1) & (value)) << 16) +#define DANUBE_ASC0_FSTAT_TXFFL_GET(value) (((value) >> 8) & ((1 << 6) - 1)) +#define DANUBE_ASC0_FSTAT_TXFFL_SET(value) (((( 1 << 6) - 1) & (value)) << 8) +#define DANUBE_ASC0_FSTAT_RXFFL_GET(value) (((value) >> 0) & ((1 << 6) - 1)) +#define DANUBE_ASC0_FSTAT_RXFFL_SET(value) (((( 1 << 6) - 1) & (value)) << 0) + + +/***********************************************************************/ +/* Module : ASC1 register address and bits */ +/***********************************************************************/ + +#define DANUBE_ASC1 (KSEG1+0x1E100C00) + /***********************************************************************/ + +#define DANUBE_ASC1_TBUF ((volatile u32*)(DANUBE_ASC1 + 0x0020)) +#define DANUBE_ASC1_RBUF ((volatile u32*)(DANUBE_ASC1 + 0x0024)) +#define DANUBE_ASC1_FSTAT ((volatile u32*)(DANUBE_ASC1 + 0x0048)) +#define DANUBE_ASC1_FSTAT_TXFREE_GET(value) (((value) >> 24) & ((1 << 6) - 1)) +#define DANUBE_ASC1_FSTAT_TXFREE_SET(value) (((( 1 << 6) - 1) & (value)) << 24) +#define DANUBE_ASC1_FSTAT_RXFREE_GET(value) (((value) >> 16) & ((1 << 6) - 1)) +#define DANUBE_ASC1_FSTAT_RXFREE_SET(value) (((( 1 << 6) - 1) & (value)) << 16) +#define DANUBE_ASC1_FSTAT_TXFFL_GET(value) (((value) >> 8) & ((1 << 6) - 1)) +#define DANUBE_ASC1_FSTAT_TXFFL_SET(value) (((( 1 << 6) - 1) & (value)) << 8) +#define DANUBE_ASC1_FSTAT_RXFFL_GET(value) (((value) >> 0) & ((1 << 6) - 1)) +#define DANUBE_ASC1_FSTAT_RXFFL_SET(value) (((( 1 << 6) - 1) & (value)) << 0) + +/***********************************************************************/ +/* Module : DMA register address and bits */ +/***********************************************************************/ + +#define DANUBE_DMA (0xBE104100) +/***********************************************************************/ + +#define DANUBE_DMA_BASE DANUBE_DMA +#define DANUBE_DMA_CLC (volatile u32*)DANUBE_DMA_BASE +#define DANUBE_DMA_ID (volatile u32*)(DANUBE_DMA_BASE+0x08) +#define DANUBE_DMA_CTRL (volatile u32*)(DANUBE_DMA_BASE+0x10) +#define DANUBE_DMA_CPOLL (volatile u32*)(DANUBE_DMA_BASE+0x14) +#define DANUBE_DMA_CS (volatile u32*)(DANUBE_DMA_BASE+0x18) +#define DANUBE_DMA_CCTRL (volatile u32*)(DANUBE_DMA_BASE+0x1C) +#define DANUBE_DMA_CDBA (volatile u32*)(DANUBE_DMA_BASE+0x20) +#define DANUBE_DMA_CDLEN (volatile u32*)(DANUBE_DMA_BASE+0x24) +#define DANUBE_DMA_CIS (volatile u32*)(DANUBE_DMA_BASE+0x28) +#define DANUBE_DMA_CIE (volatile u32*)(DANUBE_DMA_BASE+0x2C) + +#define DANUBE_DMA_PS (volatile u32*)(DANUBE_DMA_BASE+0x40) +#define DANUBE_DMA_PCTRL (volatile u32*)(DANUBE_DMA_BASE+0x44) + +#define DANUBE_DMA_IRNEN (volatile u32*)(DANUBE_DMA_BASE+0xf4) +#define DANUBE_DMA_IRNCR (volatile u32*)(DANUBE_DMA_BASE+0xf8) +#define DANUBE_DMA_IRNICR (volatile u32*)(DANUBE_DMA_BASE+0xfc) +/***********************************************************************/ +/* Module : Debug register address and bits */ +/***********************************************************************/ + +#define DANUBE_Debug (0xBF106000) +/***********************************************************************/ + + +/***MCD Break Bus Switch Register***/ +#define DANUBE_Debug_MCD_BBS ((volatile u32*)(DANUBE_Debug+ 0x0000)) +#define DANUBE_Debug_MCD_BBS_BTP1 (1 << 19) +#define DANUBE_Debug_MCD_BBS_BTP0 (1 << 18) +#define DANUBE_Debug_MCD_BBS_BSP1 (1 << 17) +#define DANUBE_Debug_MCD_BBS_BSP0 (1 << 16) +#define DANUBE_Debug_MCD_BBS_BT5EN (1 << 15) +#define DANUBE_Debug_MCD_BBS_BT4EN (1 << 14) +#define DANUBE_Debug_MCD_BBS_BT5 (1 << 13) +#define DANUBE_Debug_MCD_BBS_BT4 (1 << 12) +#define DANUBE_Debug_MCD_BBS_BS5EN (1 << 7) +#define DANUBE_Debug_MCD_BBS_BS4EN (1 << 6) +#define DANUBE_Debug_MCD_BBS_BS5 (1 << 5) +#define DANUBE_Debug_MCD_BBS_BS4 (1 << 4) + +/***MCD Multiplexer Control Register***/ +#define DANUBE_Debug_MCD_MCR ((volatile u32*)(DANUBE_Debug+ 0x0008)) +#define DANUBE_Debug_MCD_MCR_MUX5 (1 << 4) +#define DANUBE_Debug_MCD_MCR_MUX4 (1 << 3) +#define DANUBE_Debug_MCD_MCR_MUX1 (1 << 0) + + +/***********************************************************************/ +/* Module : SRAM register address and bits */ +/***********************************************************************/ + +#define DANUBE_SRAM (0xBF980000) +/***********************************************************************/ + + +/***SRAM Size Register***/ +#define DANUBE_SRAM_SRAM_SIZE ((volatile u32*)(DANUBE_SRAM+ 0x0800)) +#define DANUBE_SRAM_SRAM_SIZE_SIZE (value) (((( 1 << 23) - 1) & (value)) << 0) + +/***********************************************************************/ +/* Module : BIU register address and bits */ +/***********************************************************************/ + +#define DANUBE_BIU (0xBFA80000) +/***********************************************************************/ + + +/***BIU Identification Register***/ +#define DANUBE_BIU_BIU_ID ((volatile u32*)(DANUBE_BIU+ 0x0000)) +#define DANUBE_BIU_BIU_ID_ARCH (1 << 16) +#define DANUBE_BIU_BIU_ID_ID (value) (((( 1 << 8) - 1) & (value)) << 8) +#define DANUBE_BIU_BIU_ID_REV (value) (((( 1 << 8) - 1) & (value)) << 0) + +/***BIU Access Error Cause Register***/ +#define DANUBE_BIU_BIU_ERRCAUSE ((volatile u32*)(DANUBE_BIU+ 0x0100)) +#define DANUBE_BIU_BIU_ERRCAUSE_ERR (1 << 31) +#define DANUBE_BIU_BIU_ERRCAUSE_PORT (value) (((( 1 << 4) - 1) & (value)) << 16) +#define DANUBE_BIU_BIU_ERRCAUSE_CAUSE (value) (((( 1 << 2) - 1) & (value)) << 0) + +/***BIU Access Error Address Register***/ +#define DANUBE_BIU_BIU_ERRADDR ((volatile u32*)(DANUBE_BIU+ 0x0108)) +#define DANUBE_BIU_BIU_ERRADDR_ADDR + + +/***********************************************************************/ +/* Module : ICU register address and bits */ +/***********************************************************************/ + +#define DANUBE_ICU (0xBF880200) +#define DANUBE_ICU (0xBF880200) +#define DANUBE_ICU_EXI (0xBF101000) +/***********************************************************************/ + + +/***IM0 Interrupt Status Register***/ +#define DANUBE_ICU_IM0_ISR ((volatile u32*)(DANUBE_ICU+ 0x0000)) +#define DANUBE_ICU_IM0_ISR_IR(value) (1 << (value)) + + +/***IM1 Interrupt Status Register***/ +#define DANUBE_ICU_IM1_ISR ((volatile u32*)(DANUBE_ICU+ 0x0020)) +#define DANUBE_ICU_IM1_ISR_IR(value) (1 << (value)) + + +/***IM2 Interrupt Status Register***/ +#define DANUBE_ICU_IM2_ISR ((volatile u32*)(DANUBE_ICU+ 0x0040)) +#define DANUBE_ICU_IM2_ISR_IR(value) (1 << (value)) + +/***IM3 Interrupt Status Register***/ +#define DANUBE_ICU_IM3_ISR ((volatile u32*)(DANUBE_ICU+ 0x0060)) +#define DANUBE_ICU_IM3_ISR_IR(value) (1 << (value)) + +/***IM4 Interrupt Status Register***/ +#define DANUBE_ICU_IM4_ISR ((volatile u32*)(DANUBE_ICU+ 0x0080)) +#define DANUBE_ICU_IM4_ISR_IR(value) (1 << (value)) + + +/***IM0 Interrupt Enable Register***/ +#define DANUBE_ICU_IM0_IER ((volatile u32*)(DANUBE_ICU+ 0x0008)) +#define DANUBE_ICU_IM0_IER_IR(value) (1 << (value)) + + +/***IM1 Interrupt Enable Register***/ +#define DANUBE_ICU_IM1_IER ((volatile u32*)(DANUBE_ICU+ 0x0028)) +#define DANUBE_ICU_IM1_IER_IR(value) (1 << (value)) + + +/***IM2 Interrupt Enable Register***/ +#define DANUBE_ICU_IM2_IER ((volatile u32*)(DANUBE_ICU+ 0x0048)) +#define DANUBE_ICU_IM2_IER_IR(value) (1 << (value)8 + +/***IM3 Interrupt Enable Register***/ +#define DANUBE_ICU_IM3_IER ((volatile u32*)(DANUBE_ICU+ 0x0068)) +#define DANUBE_ICU_IM3_IER_IR(value) (1 << (value)) + +/***IM4 Interrupt Enable Register***/ +#define DANUBE_ICU_IM4_IER ((volatile u32*)(DANUBE_ICU+ 0x0088)) +#define DANUBE_ICU_IM4_IER_IR(value) (1 << (value)) + + +/***IM0 Interrupt Output Status Register***/ +#define DANUBE_ICU_IM0_IOSR ((volatile u32*)(DANUBE_ICU+ 0x0010)) +#define DANUBE_ICU_IM0_IOSR_IR(value) (1 << (value)) + + +/***IM1 Interrupt Output Status Register***/ +#define DANUBE_ICU_IM1_IOSR ((volatile u32*)(DANUBE_ICU+ 0x0030)) +#define DANUBE_ICU_IM1_IOSR_IR(value) (1 << (value)) + + +/***IM2 Interrupt Output Status Register***/ +#define DANUBE_ICU_IM2_IOSR ((volatile u32*)(DANUBE_ICU+ 0x0050)) +#define DANUBE_ICU_IM2_IOSR_IR(value) (1 << (value)) + +/***IM3 Interrupt Output Status Register***/ +#define DANUBE_ICU_IM3_IOSR ((volatile u32*)(DANUBE_ICU+ 0x0070)) +#define DANUBE_ICU_IM3_IOSR_IR(value) (1 << (value)) + +/***IM4 Interrupt Output Status Register***/ +#define DANUBE_ICU_IM4_IOSR ((volatile u32*)(DANUBE_ICU+ 0x0090)) +#define DANUBE_ICU_IM4_IOSR_IR(value) (1 << (value)) + + +/***IM0 Interrupt Request Set Register***/ +#define DANUBE_ICU_IM0_IRSR ((volatile u32*)(DANUBE_ICU+ 0x0018)) +#define DANUBE_ICU_IM0_IRSR_IR(value) (1 << (value)) + + +/***IM1 Interrupt Request Set Register***/ +#define DANUBE_ICU_IM1_IRSR ((volatile u32*)(DANUBE_ICU+ 0x0038)) +#define DANUBE_ICU_IM1_IRSR_IR(value) (1 << (value)) + + +/***IM2 Interrupt Request Set Register***/ +#define DANUBE_ICU_IM2_IRSR ((volatile u32*)(DANUBE_ICU+ 0x0058)) +#define DANUBE_ICU_IM2_IRSR_IR(value) (1 << (value)) + +/***IM3 Interrupt Request Set Register***/ +#define DANUBE_ICU_IM3_IRSR ((volatile u32*)(DANUBE_ICU+ 0x0078)) +#define DANUBE_ICU_IM3_IRSR_IR(value) (1 << (value)) + +/***IM4 Interrupt Request Set Register***/ +#define DANUBE_ICU_IM4_IRSR ((volatile u32*)(DANUBE_ICU+ 0x0098)) +#define DANUBE_ICU_IM4_IRSR_IR(value) (1 << (value)) + +/***Interrupt Vector Value Register***/ +#define DANUBE_ICU_IM_VEC ((volatile u32*)(DANUBE_ICU+ 0x0060)) + +/***Interrupt Vector Value Mask***/ +#define DANUBE_ICU_IM0_VEC_MASK 0x0000001f +#define DANUBE_ICU_IM1_VEC_MASK 0x000003e0 +#define DANUBE_ICU_IM2_VEC_MASK 0x00007c00 +#define DANUBE_ICU_IM3_VEC_MASK 0x000f8000 +#define DANUBE_ICU_IM4_VEC_MASK 0x01f00000 + +/***DMA Interrupt Mask Value***/ +#define DANUBE_DMA_H_MASK 0x00000fff + +/***External Interrupt Control Register***/ +#define DANUBE_ICU_EXTINTCR ((volatile u32*)(DANUBE_ICU_EXI+ 0x0000)) +#define DANUBE_ICU_IRNICR ((volatile u32*)(DANUBE_ICU_EXI+ 0x0004)) +#define DANUBE_ICU_IRNCR ((volatile u32*)(DANUBE_ICU_EXI+ 0x0008)) +#define DANUBE_ICU_IRNEN ((volatile u32*)(DANUBE_ICU_EXI+ 0x000c)) +#define DANUBE_ICU_NMI_CR ((volatile u32*)(DANUBE_ICU_EXI+ 0x00f0)) +#define DANUBE_ICU_NMI_SR ((volatile u32*)(DANUBE_ICU_EXI+ 0x00f4)) + +/***********************************************************************/ +/* Module : MPS register address and bits */ +/***********************************************************************/ + +#define DANUBE_MPS (KSEG1+0x1F107000) +/***********************************************************************/ + +#define DANUBE_MPS_CHIPID ((volatile u32*)(DANUBE_MPS + 0x0344)) +#define DANUBE_MPS_CHIPID_VERSION_GET(value) (((value) >> 28) & ((1 << 4) - 1)) +#define DANUBE_MPS_CHIPID_VERSION_SET(value) (((( 1 << 4) - 1) & (value)) << 28) +#define DANUBE_MPS_CHIPID_PARTNUM_GET(value) (((value) >> 12) & ((1 << 16) - 1)) +#define DANUBE_MPS_CHIPID_PARTNUM_SET(value) (((( 1 << 16) - 1) & (value)) << 12) +#define DANUBE_MPS_CHIPID_MANID_GET(value) (((value) >> 1) & ((1 << 10) - 1)) +#define DANUBE_MPS_CHIPID_MANID_SET(value) (((( 1 << 10) - 1) & (value)) << 1) + + +/* voice channel 0 ... 3 interrupt enable register */ +#define DANUBE_MPS_VC0ENR ((volatile u32*)(DANUBE_MPS + 0x0000)) +#define DANUBE_MPS_VC1ENR ((volatile u32*)(DANUBE_MPS + 0x0004)) +#define DANUBE_MPS_VC2ENR ((volatile u32*)(DANUBE_MPS + 0x0008)) +#define DANUBE_MPS_VC3ENR ((volatile u32*)(DANUBE_MPS + 0x000C)) +/* voice channel 0 ... 3 interrupt status read register */ +#define DANUBE_MPS_RVC0SR ((volatile u32*)(DANUBE_MPS + 0x0010)) +#define DANUBE_MPS_RVC1SR ((volatile u32*)(DANUBE_MPS + 0x0014)) +#define DANUBE_MPS_RVC2SR ((volatile u32*)(DANUBE_MPS + 0x0018)) +#define DANUBE_MPS_RVC3SR ((volatile u32*)(DANUBE_MPS + 0x001C)) +/* voice channel 0 ... 3 interrupt status set register */ +#define DANUBE_MPS_SVC0SR ((volatile u32*)(DANUBE_MPS + 0x0020)) +#define DANUBE_MPS_SVC1SR ((volatile u32*)(DANUBE_MPS + 0x0024)) +#define DANUBE_MPS_SVC2SR ((volatile u32*)(DANUBE_MPS + 0x0028)) +#define DANUBE_MPS_SVC3SR ((volatile u32*)(DANUBE_MPS + 0x002C)) +/* voice channel 0 ... 3 interrupt status clear register */ +#define DANUBE_MPS_CVC0SR ((volatile u32*)(DANUBE_MPS + 0x0030)) +#define DANUBE_MPS_CVC1SR ((volatile u32*)(DANUBE_MPS + 0x0034)) +#define DANUBE_MPS_CVC2SR ((volatile u32*)(DANUBE_MPS + 0x0038)) +#define DANUBE_MPS_CVC3SR ((volatile u32*)(DANUBE_MPS + 0x003C)) +/* common status 0 and 1 read register */ +#define DANUBE_MPS_RAD0SR ((volatile u32*)(DANUBE_MPS + 0x0040)) +#define DANUBE_MPS_RAD1SR ((volatile u32*)(DANUBE_MPS + 0x0044)) +/* common status 0 and 1 set register */ +#define DANUBE_MPS_SAD0SR ((volatile u32*)(DANUBE_MPS + 0x0048)) +#define DANUBE_MPS_SAD1SR ((volatile u32*)(DANUBE_MPS + 0x004C)) +/* common status 0 and 1 clear register */ +#define DANUBE_MPS_CAD0SR ((volatile u32*)(DANUBE_MPS + 0x0050)) +#define DANUBE_MPS_CAD1SR ((volatile u32*)(DANUBE_MPS + 0x0054)) +/* common status 0 and 1 enable register */ +#define DANUBE_MPS_AD0ENR ((volatile u32*)(DANUBE_MPS + 0x0058)) +#define DANUBE_MPS_AD1ENR ((volatile u32*)(DANUBE_MPS + 0x005C)) +/* notification enable register */ +#define DANUBE_MPS_CPU0_NFER ((volatile u32*)(DANUBE_MPS + 0x0060)) +#define DANUBE_MPS_CPU1_NFER ((volatile u32*)(DANUBE_MPS + 0x0064)) +/* CPU to CPU interrup request register */ +#define DANUBE_MPS_CPU0_2_CPU1_IRR ((volatile u32*)(DANUBE_MPS + 0x0070)) +#define DANUBE_MPS_CPU0_2_CPU1_IER ((volatile u32*)(DANUBE_MPS + 0x0074)) +/* Global interrupt request and request enable register */ +#define DANUBE_MPS_GIRR ((volatile u32*)(DANUBE_MPS + 0x0078)) +#define DANUBE_MPS_GIER ((volatile u32*)(DANUBE_MPS + 0x007C)) + + +#define DANUBE_MPS_CPU0_SMP0 ((volatile u32*)(DANUBE_MPS + 0x00100)) + +#define DANUBE_MPS_CPU1_SMP0 ((volatile u32*)(DANUBE_MPS + 0x00200)) + +/************************************************************************/ +/* Module : DEU register address and bits */ +/************************************************************************/ +#define DANUBE_DEU_BASE_ADDR (0xBE102000) +/* DEU Control Register */ +#define DANUBE_DEU_CLK ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0000)) +#define DANUBE_DEU_ID ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0008)) + +/* DEU control register */ +#define DANUBE_DEU_CON ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0010)) +#define DANUBE_DEU_IHR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0014)) +#define DANUBE_DEU_ILR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0018)) +#define DANUBE_DEU_K1HR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x001C)) +#define DANUBE_DEU_K1LR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0020)) +#define DANUBE_DEU_K3HR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0024)) +#define DANUBE_DEU_K3LR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0028)) +#define DANUBE_DEU_IVHR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x002C)) +#define DANUBE_DEU_IVLR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0030)) +#define DANUBE_DEU_OHR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0040)) +#define DANUBE_DEU_OLR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0050)) + +/* AES DEU register */ +#define DANUBE_AES_CON ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0050)) +#define DANUBE_AES_ID3R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0054)) +#define DANUBE_AES_ID2R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0058)) +#define DANUBE_AES_ID1R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x005C)) +#define DANUBE_AES_ID0R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0060)) + +/* AES Key register */ +#define DANUBE_AES_K7R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0064)) +#define DANUBE_AES_K6R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0068)) +#define DANUBE_AES_K5R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x006C)) +#define DANUBE_AES_K4R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0070)) +#define DANUBE_AES_K3R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0074)) +#define DANUBE_AES_K2R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0078)) +#define DANUBE_AES_K1R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x007C)) +#define DANUBE_AES_K0R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0080)) + +/* AES vector register */ +#define DANUBE_AES_IV3R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0084)) +#define DANUBE_AES_IV2R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0088)) +#define DANUBE_AES_IV1R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x008C)) +#define DANUBE_AES_IV0R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0090)) +#define DANUBE_AES_0D3R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0094)) +#define DANUBE_AES_0D2R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0098)) +#define DANUBE_AES_OD1R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x009C)) +#define DANUBE_AES_OD0R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00A0)) + +/* hash control registe */ +#define DANUBE_HASH_CON ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00B0)) +#define DANUBE_HASH_MR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00B4)) +#define DANUBE_HASH_D1R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00B8 )) +#define DANUBE_HASH_D2R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00BC )) +#define DANUBE_HASH_D3R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00C0 )) +#define DANUBE_HASH_D4R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00C4)) +#define DANUBE_HASH_D5R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00C8)) + +#define DANUBE_CON ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00EC)) + + + + +/************************************************************************/ +/* Module : PPE register address and bits */ +/************************************************************************/ +#define DANUBE_PPE_BASE_ADDR (KSEG1 + 0x1E180000) +#define DANUBE_PPE_PP32_DEBUG_REG_ADDR(x) ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x0000) << 2))) +#define DANUBE_PPE_PPM_INT_REG_ADDR(x) ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x0030) << 2))) +#define DANUBE_PPE_PP32_INTERNAL_RES_ADDR(x) ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x0040) << 2))) +#define DANUBE_PPE_PPE_CLOCK_CONTROL_ADDR(x) ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x0100) << 2))) +#define DANUBE_PPE_CDM_CODE_MEMORY_RAM0_ADDR(x) ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x1000) << 2))) +#define DANUBE_PPE_CDM_CODE_MEMORY_RAM1_ADDR(x) ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x2000) << 2))) +#define DANUBE_PPE_REG_ADDR(x) ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x4000) << 2))) +#define DANUBE_PPE_PP32_DATA_MEMORY_RAM1_ADDR(x) ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x5000) << 2))) +#define DANUBE_PPE_PPM_INT_UNIT_ADDR(x) ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x6000) << 2))) +#define DANUBE_PPE_PPM_TIMER0_ADDR(x) ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x6100) << 2))) +#define DANUBE_PPE_PPM_TASK_IND_REG_ADDR(x) ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x6200) << 2))) +#define DANUBE_PPE_PPS_BRK_ADDR(x) ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x6300) << 2))) +#define DANUBE_PPE_PPM_TIMER1_ADDR(x) ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x6400) << 2))) +#define DANUBE_PPE_SB_RAM0_ADDR(x) ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x8000) << 2))) +#define DANUBE_PPE_SB_RAM1_ADDR(x) ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x8400) << 2))) +#define DANUBE_PPE_SB_RAM2_ADDR(x) ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x8C00) << 2))) +#define DANUBE_PPE_SB_RAM3_ADDR(x) ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x9600) << 2))) + +#define DANUBE_PPE_PP32_SLEEP DANUBE_PPE_REG_ADDR(0x0010) /* PP32 Power Saving Register */ +#define DANUBE_PPE_CDM_CFG DANUBE_PPE_REG_ADDR(0x0100) /* Code/Data Memory (CDM) Register */ + +/* Mailbox Registers */ +#define DANUBE_PPE_MBOX_IGU0_ISRS DANUBE_PPE_REG_ADDR(0x0200) +#define DANUBE_PPE_MBOX_IGU0_ISRC DANUBE_PPE_REG_ADDR(0x0201) +#define DANUBE_PPE_MBOX_IGU0_ISR DANUBE_PPE_REG_ADDR(0x0202) +#define DANUBE_PPE_MBOX_IGU0_IER DANUBE_PPE_REG_ADDR(0x0203) +#define DANUBE_PPE_MBOX_IGU1_ISRS0 DANUBE_PPE_REG_ADDR(0x0204) +#define DANUBE_PPE_MBOX_IGU1_ISRC0 DANUBE_PPE_REG_ADDR(0x0205) +#define DANUBE_PPE_MBOX_IGU1_ISR0 DANUBE_PPE_REG_ADDR(0x0206) +#define DANUBE_PPE_MBOX_IGU1_IER0 DANUBE_PPE_REG_ADDR(0x0207) +#define DANUBE_PPE_MBOX_IGU1_ISRS1 DANUBE_PPE_REG_ADDR(0x0208) +#define DANUBE_PPE_MBOX_IGU1_ISRC1 DANUBE_PPE_REG_ADDR(0x0209) +#define DANUBE_PPE_MBOX_IGU1_ISR1 DANUBE_PPE_REG_ADDR(0x020A) +#define DANUBE_PPE_MBOX_IGU1_IER1 DANUBE_PPE_REG_ADDR(0x020B) +#define DANUBE_PPE_MBOX_IGU1_ISRS2 DANUBE_PPE_REG_ADDR(0x020C) +#define DANUBE_PPE_MBOX_IGU1_ISRC2 DANUBE_PPE_REG_ADDR(0x020D) +#define DANUBE_PPE_MBOX_IGU1_ISR2 DANUBE_PPE_REG_ADDR(0x020E) +#define DANUBE_PPE_MBOX_IGU1_IER2 DANUBE_PPE_REG_ADDR(0x020F) +#define DANUBE_PPE_MBOX_IGU2_ISRS DANUBE_PPE_REG_ADDR(0x0210) +#define DANUBE_PPE_MBOX_IGU2_ISRC DANUBE_PPE_REG_ADDR(0x0211) +#define DANUBE_PPE_MBOX_IGU2_ISR DANUBE_PPE_REG_ADDR(0x0212) +#define DANUBE_PPE_MBOX_IGU2_IER DANUBE_PPE_REG_ADDR(0x0213) +#define DANUBE_PPE_MBOX_IGU3_ISRS DANUBE_PPE_REG_ADDR(0x0214) +#define DANUBE_PPE_MBOX_IGU3_ISRC DANUBE_PPE_REG_ADDR(0x0215) +#define DANUBE_PPE_MBOX_IGU3_ISR DANUBE_PPE_REG_ADDR(0x0216) +#define DANUBE_PPE_MBOX_IGU3_IER DANUBE_PPE_REG_ADDR(0x0217) +#define DANUBE_PPE_MBOX_IGU4_ISRS DANUBE_PPE_REG_ADDR(0x0218) +#define DANUBE_PPE_MBOX_IGU4_ISRC DANUBE_PPE_REG_ADDR(0x0219) +#define DANUBE_PPE_MBOX_IGU4_ISR DANUBE_PPE_REG_ADDR(0x021A) +#define DANUBE_PPE_MBOX_IGU4_IER DANUBE_PPE_REG_ADDR(0x021B) +/* + * Shared Buffer (SB) Registers + */ +#define DANUBE_PPE_SB_MST_PRI0 DANUBE_PPE_REG_ADDR(0x0300) +#define DANUBE_PPE_SB_MST_PRI1 DANUBE_PPE_REG_ADDR(0x0301) +#define DANUBE_PPE_SB_MST_PRI2 DANUBE_PPE_REG_ADDR(0x0302) +#define DANUBE_PPE_SB_MST_PRI3 DANUBE_PPE_REG_ADDR(0x0303) +#define DANUBE_PPE_SB_MST_PRI4 DANUBE_PPE_REG_ADDR(0x0304) +#define DANUBE_PPE_SB_MST_SEL DANUBE_PPE_REG_ADDR(0x0305) +/* + * RTHA Registers + */ +#define DANUBE_PPE_RFBI_CFG DANUBE_PPE_REG_ADDR(0x0400) +#define DANUBE_PPE_RBA_CFG0 DANUBE_PPE_REG_ADDR(0x0404) +#define DANUBE_PPE_RBA_CFG1 DANUBE_PPE_REG_ADDR(0x0405) +#define DANUBE_PPE_RCA_CFG0 DANUBE_PPE_REG_ADDR(0x0408) +#define DANUBE_PPE_RCA_CFG1 DANUBE_PPE_REG_ADDR(0x0409) +#define DANUBE_PPE_RDES_CFG0 DANUBE_PPE_REG_ADDR(0x040C) +#define DANUBE_PPE_RDES_CFG1 DANUBE_PPE_REG_ADDR(0x040D) +#define DANUBE_PPE_SFSM_STATE0 DANUBE_PPE_REG_ADDR(0x0410) +#define DANUBE_PPE_SFSM_STATE1 DANUBE_PPE_REG_ADDR(0x0411) +#define DANUBE_PPE_SFSM_DBA0 DANUBE_PPE_REG_ADDR(0x0412) +#define DANUBE_PPE_SFSM_DBA1 DANUBE_PPE_REG_ADDR(0x0413) +#define DANUBE_PPE_SFSM_CBA0 DANUBE_PPE_REG_ADDR(0x0414) +#define DANUBE_PPE_SFSM_CBA1 DANUBE_PPE_REG_ADDR(0x0415) +#define DANUBE_PPE_SFSM_CFG0 DANUBE_PPE_REG_ADDR(0x0416) +#define DANUBE_PPE_SFSM_CFG1 DANUBE_PPE_REG_ADDR(0x0417) +#define DANUBE_PPE_SFSM_PGCNT0 DANUBE_PPE_REG_ADDR(0x041C) +#define DANUBE_PPE_SFSM_PGCNT1 DANUBE_PPE_REG_ADDR(0x041D) +/* + * TTHA Registers + */ +#define DANUBE_PPE_FFSM_DBA0 DANUBE_PPE_REG_ADDR(0x0508) +#define DANUBE_PPE_FFSM_DBA1 DANUBE_PPE_REG_ADDR(0x0509) +#define DANUBE_PPE_FFSM_CFG0 DANUBE_PPE_REG_ADDR(0x050A) +#define DANUBE_PPE_FFSM_CFG1 DANUBE_PPE_REG_ADDR(0x050B) +#define DANUBE_PPE_FFSM_IDLE_HEAD_BC0 DANUBE_PPE_REG_ADDR(0x050E) +#define DANUBE_PPE_FFSM_IDLE_HEAD_BC1 DANUBE_PPE_REG_ADDR(0x050F) +#define DANUBE_PPE_FFSM_PGCNT0 DANUBE_PPE_REG_ADDR(0x0514) +#define DANUBE_PPE_FFSM_PGCNT1 DANUBE_PPE_REG_ADDR(0x0515) +/* + * ETOP MDIO Registers + */ +#define DANUBE_PPE_ETOP_MDIO_CFG DANUBE_PPE_REG_ADDR(0x0600) +#define DANUBE_PPE_ETOP_MDIO_ACC DANUBE_PPE_REG_ADDR(0x0601) +#define DANUBE_PPE_ETOP_CFG DANUBE_PPE_REG_ADDR(0x0602) +#define DANUBE_PPE_ETOP_IG_VLAN_COS DANUBE_PPE_REG_ADDR(0x0603) +#define DANUBE_PPE_ETOP_IG_DSCP_COS3 DANUBE_PPE_REG_ADDR(0x0604) +#define DANUBE_PPE_ETOP_IG_DSCP_COS2 DANUBE_PPE_REG_ADDR(0x0605) +#define DANUBE_PPE_ETOP_IG_DSCP_COS1 DANUBE_PPE_REG_ADDR(0x0606) +#define DANUBE_PPE_ETOP_IG_DSCP_COS0 DANUBE_PPE_REG_ADDR(0x0607) +#define DANUBE_PPE_ETOP_IG_PLEN_CTRL0 DANUBE_PPE_REG_ADDR(0x0608) +#define DANUBE_PPE_ETOP_IG_PLEN_CTRL1 DANUBE_PPE_REG_ADDR(0x0609) +#define DANUBE_PPE_ETOP_ISR DANUBE_PPE_REG_ADDR(0x060A) +#define DANUBE_PPE_ETOP_IER DANUBE_PPE_REG_ADDR(0x060B) +#define DANUBE_PPE_ETOP_VPID DANUBE_PPE_REG_ADDR(0x060C) +#define DANUBE_PPE_ENET_MAC_CFG DANUBE_PPE_REG_ADDR(0x0610) +#define DANUBE_PPE_ENETS_DBA DANUBE_PPE_REG_ADDR(0x0612) +#define DANUBE_PPE_ENETS_CBA DANUBE_PPE_REG_ADDR(0x0613) +#define DANUBE_PPE_ENETS_CFG DANUBE_PPE_REG_ADDR(0x0614) +#define DANUBE_PPE_ENETS_PGCNT DANUBE_PPE_REG_ADDR(0x0615) +#define DANUBE_PPE_ENETS_PGCNT_DSRC_PP32 (0x00020000) +#define DANUBE_PPE_ENETS_PGCNT_DVAL_SHIFT (9) +#define DANUBE_PPE_ENETS_PGCNT_DCMD (0x00000100) +#define DANUBE_PPE_ENETS_PKTCNT DANUBE_PPE_REG_ADDR(0x0616) +#define DANUBE_PPE_ENETS_PKTCNT_DSRC_PP32 (0x00000200) +#define DANUBE_PPE_ENETS_PKTCNT_DCMD (0x00000100) +#define DANUBE_PPE_ENETS_PKTCNT_UPKT (0x000000FF) +#define DANUBE_PPE_ENETS_BUF_CTRL DANUBE_PPE_REG_ADDR(0x0617) +#define DANUBE_PPE_ENETS_COS_CFG DANUBE_PPE_REG_ADDR(0x0618) +#define DANUBE_PPE_ENETS_IGDROP DANUBE_PPE_REG_ADDR(0x0619) +#define DANUBE_PPE_ENETF_DBA DANUBE_PPE_REG_ADDR(0x0630) +#define DANUBE_PPE_ENETF_CBA DANUBE_PPE_REG_ADDR(0x0631) +#define DANUBE_PPE_ENETF_CFG DANUBE_PPE_REG_ADDR(0x0632) +#define DANUBE_PPE_ENETF_PGCNT DANUBE_PPE_REG_ADDR(0x0633) +#define DANUBE_PPE_ENETF_PGCNT_ISRC_PP32 (0x00020000) +#define DANUBE_PPE_ENETF_PGCNT_IVAL_SHIFT (9) +#define DANUBE_PPE_ENETF_PGCNT_ICMD (0x00000100) +#define DANUBE_PPE_ENETF_PKTCNT DANUBE_PPE_REG_ADDR(0x0634) +#define DANUBE_PPE_ENETF_PKTCNT_ISRC_PP32 (0x00000200) +#define DANUBE_PPE_ENETF_PKTCNT_ICMD (0x00000100) +#define DANUBE_PPE_ENETF_PKTCNT_VPKT (0x000000FF) +#define DANUBE_PPE_ENETF_HFCTRL DANUBE_PPE_REG_ADDR(0x0635) +#define DANUBE_PPE_ENETF_TXCTRL DANUBE_PPE_REG_ADDR(0x0636) +#define DANUBE_PPE_ENETF_VLCOS0 DANUBE_PPE_REG_ADDR(0x0638) +#define DANUBE_PPE_ENETF_VLCOS1 DANUBE_PPE_REG_ADDR(0x0639) +#define DANUBE_PPE_ENETF_VLCOS2 DANUBE_PPE_REG_ADDR(0x063A) +#define DANUBE_PPE_ENETF_VLCOS3 DANUBE_PPE_REG_ADDR(0x063B) +#define DANUBE_PPE_ENETF_EGERR DANUBE_PPE_REG_ADDR(0x063C) +#define DANUBE_PPE_ENETF_EGDROP DANUBE_PPE_REG_ADDR(0x063D) +/* + * DPLUS Registers + */ +#define DANUBE_PPE_DPLUS_TXDB DANUBE_PPE_REG_ADDR(0x0700) +#define DANUBE_PPE_DPLUS_TXCB DANUBE_PPE_REG_ADDR(0x0701) +#define DANUBE_PPE_DPLUS_TXCFG DANUBE_PPE_REG_ADDR(0x0702) +#define DANUBE_PPE_DPLUS_TXPGCNT DANUBE_PPE_REG_ADDR(0x0703) +#define DANUBE_PPE_DPLUS_RXDB DANUBE_PPE_REG_ADDR(0x0710) +#define DANUBE_PPE_DPLUS_RXCB DANUBE_PPE_REG_ADDR(0x0711) +#define DANUBE_PPE_DPLUS_RXCFG DANUBE_PPE_REG_ADDR(0x0712) +#define DANUBE_PPE_DPLUS_RXPGCNT DANUBE_PPE_REG_ADDR(0x0713) +/* + * BMC Registers + */ +#define DANUBE_PPE_BMC_CMD3 DANUBE_PPE_REG_ADDR(0x0800) +#define DANUBE_PPE_BMC_CMD2 DANUBE_PPE_REG_ADDR(0x0801) +#define DANUBE_PPE_BMC_CMD1 DANUBE_PPE_REG_ADDR(0x0802) +#define DANUBE_PPE_BMC_CMD0 DANUBE_PPE_REG_ADDR(0x0803) +#define DANUBE_PPE_BMC_CFG0 DANUBE_PPE_REG_ADDR(0x0804) +#define DANUBE_PPE_BMC_CFG1 DANUBE_PPE_REG_ADDR(0x0805) +#define DANUBE_PPE_BMC_POLY0 DANUBE_PPE_REG_ADDR(0x0806) +#define DANUBE_PPE_BMC_POLY1 DANUBE_PPE_REG_ADDR(0x0807) +#define DANUBE_PPE_BMC_CRC0 DANUBE_PPE_REG_ADDR(0x0808) +#define DANUBE_PPE_BMC_CRC1 DANUBE_PPE_REG_ADDR(0x0809) +/* + * SLL Registers + */ +#define DANUBE_PPE_SLL_CMD1 DANUBE_PPE_REG_ADDR(0x0900) +#define DANUBE_PPE_SLL_CMD0 DANUBE_PPE_REG_ADDR(0x0901) +#define DANUBE_PPE_SLL_KEY0 DANUBE_PPE_REG_ADDR(0x0910) +#define DANUBE_PPE_SLL_KEY1 DANUBE_PPE_REG_ADDR(0x0911) +#define DANUBE_PPE_SLL_KEY2 DANUBE_PPE_REG_ADDR(0x0912) +#define DANUBE_PPE_SLL_KEY3 DANUBE_PPE_REG_ADDR(0x0913) +#define DANUBE_PPE_SLL_KEY4 DANUBE_PPE_REG_ADDR(0x0914) +#define DANUBE_PPE_SLL_KEY5 DANUBE_PPE_REG_ADDR(0x0915) +#define DANUBE_PPE_SLL_RESULT DANUBE_PPE_REG_ADDR(0x0920) +/* + * EMA Registers + */ +#define DANUBE_PPE_EMA_CMD2 DANUBE_PPE_REG_ADDR(0x0A00) +#define DANUBE_PPE_EMA_CMD1 DANUBE_PPE_REG_ADDR(0x0A01) +#define DANUBE_PPE_EMA_CMD0 DANUBE_PPE_REG_ADDR(0x0A02) +#define DANUBE_PPE_EMA_ISR DANUBE_PPE_REG_ADDR(0x0A04) +#define DANUBE_PPE_EMA_IER DANUBE_PPE_REG_ADDR(0x0A05) +#define DANUBE_PPE_EMA_CFG DANUBE_PPE_REG_ADDR(0x0A06) +/* + * UTPS Registers + */ +#define DANUBE_PPE_UTP_TXCA0 DANUBE_PPE_REG_ADDR(0x0B00) +#define DANUBE_PPE_UTP_TXNA0 DANUBE_PPE_REG_ADDR(0x0B01) +#define DANUBE_PPE_UTP_TXCA1 DANUBE_PPE_REG_ADDR(0x0B02) +#define DANUBE_PPE_UTP_TXNA1 DANUBE_PPE_REG_ADDR(0x0B03) +#define DANUBE_PPE_UTP_RXCA0 DANUBE_PPE_REG_ADDR(0x0B10) +#define DANUBE_PPE_UTP_RXNA0 DANUBE_PPE_REG_ADDR(0x0B11) +#define DANUBE_PPE_UTP_RXCA1 DANUBE_PPE_REG_ADDR(0x0B12) +#define DANUBE_PPE_UTP_RXNA1 DANUBE_PPE_REG_ADDR(0x0B13) +#define DANUBE_PPE_UTP_CFG DANUBE_PPE_REG_ADDR(0x0B20) +#define DANUBE_PPE_UTP_ISR DANUBE_PPE_REG_ADDR(0x0B30) +#define DANUBE_PPE_UTP_IER DANUBE_PPE_REG_ADDR(0x0B31) +/* + * QSB Registers + */ +#define DANUBE_PPE_QSB_RELOG DANUBE_PPE_REG_ADDR(0x0C00) +#define DANUBE_PPE_QSB_EMIT0 DANUBE_PPE_REG_ADDR(0x0C01) +#define DANUBE_PPE_QSB_EMIT1 DANUBE_PPE_REG_ADDR(0x0C02) +#define DANUBE_PPE_QSB_ICDV DANUBE_PPE_REG_ADDR(0x0C07) +#define DANUBE_PPE_QSB_SBL DANUBE_PPE_REG_ADDR(0x0C09) +#define DANUBE_PPE_QSB_CFG DANUBE_PPE_REG_ADDR(0x0C0A) +#define DANUBE_PPE_QSB_RTM DANUBE_PPE_REG_ADDR(0x0C0B) +#define DANUBE_PPE_QSB_RTD DANUBE_PPE_REG_ADDR(0x0C0C) +#define DANUBE_PPE_QSB_RAMAC DANUBE_PPE_REG_ADDR(0x0C0D) +#define DANUBE_PPE_QSB_ISTAT DANUBE_PPE_REG_ADDR(0x0C0E) +#define DANUBE_PPE_QSB_IMR DANUBE_PPE_REG_ADDR(0x0C0F) +#define DANUBE_PPE_QSB_SRC DANUBE_PPE_REG_ADDR(0x0C10) +/* + * DSP User Registers + */ +#define DANUBE_PPE_DREG_A_VERSION DANUBE_PPE_REG_ADDR(0x0D00) +#define DANUBE_PPE_DREG_A_CFG DANUBE_PPE_REG_ADDR(0x0D01) +#define DANUBE_PPE_DREG_AT_CTRL DANUBE_PPE_REG_ADDR(0x0D02) +#define DANUBE_PPE_DREG_AR_CTRL DANUBE_PPE_REG_ADDR(0x0D08) +#define DANUBE_PPE_DREG_A_UTPCFG DANUBE_PPE_REG_ADDR(0x0D0E) +#define DANUBE_PPE_DREG_A_STATUS DANUBE_PPE_REG_ADDR(0x0D0F) +#define DANUBE_PPE_DREG_AT_CFG0 DANUBE_PPE_REG_ADDR(0x0D20) +#define DANUBE_PPE_DREG_AT_CFG1 DANUBE_PPE_REG_ADDR(0x0D21) +#define DANUBE_PPE_DREG_FB_SIZE0 DANUBE_PPE_REG_ADDR(0x0D22) +#define DANUBE_PPE_DREG_FB_SIZE1 DANUBE_PPE_REG_ADDR(0x0D23) +#define DANUBE_PPE_DREG_AT_CELL0 DANUBE_PPE_REG_ADDR(0x0D24) +#define DANUBE_PPE_DREG_AT_CELL1 DANUBE_PPE_REG_ADDR(0x0D25) +#define DANUBE_PPE_DREG_AT_IDLE_CNT0 DANUBE_PPE_REG_ADDR(0x0D26) +#define DANUBE_PPE_DREG_AT_IDLE_CNT1 DANUBE_PPE_REG_ADDR(0x0D27) +#define DANUBE_PPE_DREG_AT_IDLE0 DANUBE_PPE_REG_ADDR(0x0D28) +#define DANUBE_PPE_DREG_AT_IDLE1 DANUBE_PPE_REG_ADDR(0x0D29) +#define DANUBE_PPE_DREG_AR_CFG0 DANUBE_PPE_REG_ADDR(0x0D60) +#define DANUBE_PPE_DREG_AR_CFG1 DANUBE_PPE_REG_ADDR(0x0D61) +#define DANUBE_PPE_DREG_AR_FB_START0 DANUBE_PPE_REG_ADDR(0x0D62) +#define DANUBE_PPE_DREG_AR_FB_START1 DANUBE_PPE_REG_ADDR(0x0D63) +#define DANUBE_PPE_DREG_AR_FB_END0 DANUBE_PPE_REG_ADDR(0x0D64) +#define DANUBE_PPE_DREG_AR_FB_END1 DANUBE_PPE_REG_ADDR(0x0D65) +#define DANUBE_PPE_DREG_AR_ATM_STAT0 DANUBE_PPE_REG_ADDR(0x0D66) +#define DANUBE_PPE_DREG_AR_ATM_STAT1 DANUBE_PPE_REG_ADDR(0x0D67) +#define DANUBE_PPE_DREG_AR_CELL0 DANUBE_PPE_REG_ADDR(0x0D68) +#define DANUBE_PPE_DREG_AR_CELL1 DANUBE_PPE_REG_ADDR(0x0D69) +#define DANUBE_PPE_DREG_AR_IDLE_CNT0 DANUBE_PPE_REG_ADDR(0x0D6A) +#define DANUBE_PPE_DREG_AR_IDLE_CNT1 DANUBE_PPE_REG_ADDR(0x0D6B) +#define DANUBE_PPE_DREG_AR_AIIDLE_CNT0 DANUBE_PPE_REG_ADDR(0x0D6C) +#define DANUBE_PPE_DREG_AR_AIIDLE_CNT1 DANUBE_PPE_REG_ADDR(0x0D6D) +#define DANUBE_PPE_DREG_AR_BE_CNT0 DANUBE_PPE_REG_ADDR(0x0D6E) +#define DANUBE_PPE_DREG_AR_BE_CNT1 DANUBE_PPE_REG_ADDR(0x0D6F) +#define DANUBE_PPE_DREG_AR_HEC_CNT0 DANUBE_PPE_REG_ADDR(0x0D70) +#define DANUBE_PPE_DREG_AR_HEC_CNT1 DANUBE_PPE_REG_ADDR(0x0D71) +#define DANUBE_PPE_DREG_AR_CD_CNT0 DANUBE_PPE_REG_ADDR(0x0D72) +#define DANUBE_PPE_DREG_AR_CD_CNT1 DANUBE_PPE_REG_ADDR(0x0D73) +#define DANUBE_PPE_DREG_AR_IDLE0 DANUBE_PPE_REG_ADDR(0x0D74) +#define DANUBE_PPE_DREG_AR_IDLE1 DANUBE_PPE_REG_ADDR(0x0D75) +#define DANUBE_PPE_DREG_AR_DELIN0 DANUBE_PPE_REG_ADDR(0x0D76) +#define DANUBE_PPE_DREG_AR_DELIN1 DANUBE_PPE_REG_ADDR(0x0D77) +#define DANUBE_PPE_DREG_RESV0 DANUBE_PPE_REG_ADDR(0x0D78) +#define DANUBE_PPE_DREG_RESV1 DANUBE_PPE_REG_ADDR(0x0D79) +#define DANUBE_PPE_DREG_RX_MIB_CMD0 DANUBE_PPE_REG_ADDR(0x0D80) +#define DANUBE_PPE_DREG_RX_MIB_CMD1 DANUBE_PPE_REG_ADDR(0x0D81) +#define DANUBE_PPE_DREG_AR_OVDROP_CNT0 DANUBE_PPE_REG_ADDR(0x0D98) +#define DANUBE_PPE_DREG_AR_OVDROP_CNT1 DANUBE_PPE_REG_ADDR(0x0D99) + + +/************************************************************************/ +/* Module : PPE register address and bits */ +/************************************************************************/ +#define DANUBE_PPE32_BASE 0xBE180000 +#define DANUBE_PPE32_DEBUG_BREAK_TRACE_REG (DANUBE_PPE32_BASE + (0x0000 * 4)) +#define DANUBE_PPE32_INT_MASK_STATUS_REG (DANUBE_PPE32_BASE + (0x0030 * 4)) +#define DANUBE_PPE32_INT_RESOURCE_REG (DANUBE_PPE32_BASE + (0x0040 * 4)) +#define DANUBE_PPE32_CDM_CODE_MEM_B0 (DANUBE_PPE32_BASE + (0x1000 * 4)) +#define DANUBE_PPE32_CDM_CODE_MEM_B1 (DANUBE_PPE32_BASE + (0x2000 * 4)) +#define DANUBE_PPE32_DATA_MEM_MAP_REG_BASE (DANUBE_PPE32_BASE + (0x4000 * 4)) + +/* + * ETOP MDIO Registers + */ +#define ETOP_MDIO_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0600 * 4))) +#define ETOP_MDIO_ACC ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0601 * 4))) +#define ETOP_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0602 * 4))) +#define ETOP_IG_VLAN_COS ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0603 * 4))) +#define ETOP_IG_DSCP_COS3 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0604 * 4))) +#define ETOP_IG_DSCP_COS2 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0605 * 4))) +#define ETOP_IG_DSCP_COS1 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0606 * 4))) +#define ETOP_IG_DSCP_COS0 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0607 * 4))) +#define ETOP_IG_PLEN_CTRL ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0608 * 4))) +#define ETOP_ISR ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060A * 4))) +#define ETOP_IER ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060B * 4))) +#define ETOP_VPID ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060C * 4))) +#define ENET_MAC_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0610 * 4))) +#define ENETS_DBA ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0612 * 4))) +#define ENETS_CBA ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0613 * 4))) +#define ENETS_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0614 * 4))) +#define ENETS_PGCNT ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0615 * 4))) +#define ENETS_PKTCNT ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0616 * 4))) +#define ENETS_BUF_CTRL ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0617 * 4))) +#define ENETS_COS_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0618 * 4))) +#define ENETS_IGDROP ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0619 * 4))) +#define ENETS_IGERR ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x061A * 4))) +#define ENET_MAC_DA0 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x061B * 4))) +#define ENET_MAC_DA1 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x061C * 4))) + +#define ENETF_DBA ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0630 * 4))) +#define ENETF_CBA ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0631 * 4))) +#define ENETF_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0632 * 4))) +#define ENETF_PGCNT ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0633 * 4))) +#define ENETF_PKTCNT ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0634 * 4))) +#define ENETF_HFCTRL ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0635 * 4))) +#define ENETF_TXCTRL ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0636 * 4))) + +#define ENETF_VLCOS0 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0638 * 4))) +#define ENETF_VLCOS1 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0639 * 4))) +#define ENETF_VLCOS2 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x063A * 4))) +#define ENETF_VLCOS3 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x063B * 4))) +#define ENETF_EGERR ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x063C * 4))) +#define ENETF_EGDROP ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x063D * 4))) + + +/* + * ETOP MDIO Registers + */ +#define DANUBE_PPE32_ETOP_MDIO_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0600 * 4))) +#define DANUBE_PPE32_ETOP_MDIO_ACC ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0601 * 4))) +#define DANUBE_PPE32_ETOP_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0602 * 4))) +#define DANUBE_PPE32_ETOP_IG_VLAN_COS ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0603 * 4))) +#define DANUBE_PPE32_ETOP_IG_DSCP_COS3 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0604 * 4))) +#define DANUBE_PPE32_ETOP_IG_DSCP_COS2 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0605 * 4))) +#define DANUBE_PPE32_ETOP_IG_DSCP_COS1 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0606 * 4))) +#define DANUBE_PPE32_ETOP_IG_DSCP_COS0 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0607 * 4))) +#define DANUBE_PPE32_ETOP_IG_PLEN_CTRL ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0608 * 4))) +#define DANUBE_PPE32_ETOP_ISR ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060A * 4))) +#define DANUBE_PPE32_ETOP_IER ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060B * 4))) +#define DANUBE_PPE32_ETOP_VPID ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060C * 4))) + + +/* ENET Register */ +#define DANUBE_PPE32_ENET_MAC_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0610 * 4))) +#define DANUBE_PPE32_ENET_IG_PKTDROP ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0619 * 4))) +#define DANUBE_PPE32_ENET_CoS_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0618 * 4))) + +/*********LED register definition****************/ + +#define DANUBE_LED 0xBE100BB0 +#define DANUBE_LED_CON0 ((volatile u32*)(DANUBE_LED + 0x0000)) +#define DANUBE_LED_CON1 ((volatile u32*)(DANUBE_LED + 0x0004)) +#define DANUBE_LED_CPU0 ((volatile u32*)(DANUBE_LED + 0x0008)) +#define DANUBE_LED_CPU1 ((volatile u32*)(DANUBE_LED + 0x000C)) +#define DANUBE_LED_AR ((volatile u32*)(DANUBE_LED + 0x0010)) + + + + +/***********************************************************************/ +#define DANUBE_REG32(addr) *((volatile u32 *)(addr)) +/***********************************************************************/ +#endif //DANUBE_H diff --git a/package/uboot-lantiq/files/include/configs/easy50712.h b/package/uboot-lantiq/files/include/configs/easy50712.h new file mode 100644 index 0000000..e061b83 --- /dev/null +++ b/package/uboot-lantiq/files/include/configs/easy50712.h @@ -0,0 +1,115 @@ +/* + * (C) Copyright 2003-2005 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * This file contains the configuration parameters for the Danube reference board. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* #define DEBUG */ + +#define CONFIG_MIPS32 1 /* MIPS32 CPU compatible */ +#define CONFIG_MIPS24KEC 1 /* MIPS 24KEc CPU core */ +#define CONFIG_DANUBE 1 /* in a Danube/Twinpass Chip */ +#define CONFIG_EASY50712 1 /* on the Danube Reference Board */ + +#define CONFIG_SYS_MIPS_MULTI_CPU 1 /* This is a multi cpu system */ + +#define CONFIG_SYS_MAX_RAM 32*1024*1024 + +#define CONFIG_FLASH_CFI_DRIVER 1 + +#define CONFIG_SYS_INIT_RAM_LOCK_MIPS +#ifdef CONFIG_SYS_RAMBOOT + //#warning CONFIG_SYS_RAMBOOT + #define CONFIG_SKIP_LOWLEVEL_INIT +#else /* CONFIG_SYS_RAMBOOT */ + + #define CONFIG_SYS_EBU_BOOT + + #ifdef CONFIG_USE_DDR_RAM + /* FIXME: should not need these workarounds */ + #define DANUBE_DDR_RAM_SIZE 32 /* 32M DDR-DRAM for reference board */ + #endif + + #define INFINEON_EBU_BOOTCFG 0x688C688C /* CMULT = 8 for 150 MHz */ + +#endif /* CONFIG_SYS_RAMBOOT */ + +#if 1 +#ifndef CPU_CLOCK_RATE +#define CPU_CLOCK_RATE (ifx_get_cpuclk()) +#endif +#endif + +#define CONFIG_SYS_PROMPT "DANUBE => " /* Monitor Command Prompt */ + +#undef CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ + +/* + * Include common defines/options for all Infineon boards + */ +#include "ifx-common.h" + +/* + * Cache Configuration (cpu/chip specific, Danube) + */ +#define CONFIG_SYS_DCACHE_SIZE 16384 +#define CONFIG_SYS_ICACHE_SIZE 16384 +#define CONFIG_SYS_CACHELINE_SIZE 32 +#define CONFIG_SYS_MIPS_CACHE_OPER_MODE CONF_CM_CACHABLE_NO_WA + +#define CONFIG_NET_MULTI +#if 0 +#define CONFIG_M4530_ETH +#define CONFIG_M4530_FPGA +#endif + +#define CONFIG_IFX_ETOP +#define CLK_OUT2_25MHZ +#define CONFIG_EXTRA_SWITCH + +#define CONFIG_RMII /* use interface in RMII mode */ + +#define CONFIG_MII +#define CONFIG_CMD_MII + +#define CONFIG_IFX_ASC + +#ifdef CONFIG_USE_ASC0 +#define CONFIG_SYS_IFX_ASC_BASE 0x1E100400 +#else +#define CONFIG_SYS_IFX_ASC_BASE 0x1E100C00 +#endif + +#ifdef CONFIG_SYS_RAMBOOT +/* Configuration of EBU: */ +/* starting address from 0xb0000000 */ +/* make the flash available from RAM boot */ +# define CONFIG_EBU_ADDSEL0 0x10000031 +# define CONFIG_EBU_BUSCON0 0x0001D7FF +#endif + +#endif /* __CONFIG_H */ diff --git a/package/uboot-lantiq/files/include/configs/ifx-common.h b/package/uboot-lantiq/files/include/configs/ifx-common.h new file mode 100644 index 0000000..88569ad --- /dev/null +++ b/package/uboot-lantiq/files/include/configs/ifx-common.h @@ -0,0 +1,192 @@ +/* + * (C) Copyright 2008 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * Common configuration options for all AMCC boards + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __IFX_COMMON_H +#define __IFX_COMMON_H + +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ + +#define CONFIG_BAUDRATE 115200 + +/* valid baudrates */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CONFIG_TIMESTAMP /* Print image info with timestamp */ + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS +#define CONFIG_EXTRA_ENV_SETTINGS \ + "ram_addr=0x80500000\0" \ + "kernel_addr=0xb0050000\0" \ + "mtdparts=mtdparts=ifx-nor:256k(uboot)ro,64k(uboot_env)ro,64k(kernel),-(rootfs)\0" \ + "flashargs=setenv bootargs rootfstype=squashfs,jffs2\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath} \0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off\0" \ + "addmisc=setenv bootargs ${bootargs} init=/etc/preinit " \ + "console=ttyS1,115200 ethaddr=${ethaddr} ${mtdparts}" \ + "${mtdparts}\0" \ + "flash_flash=run flashargs addip addmisc;" \ + "bootm ${kernel_addr}\0" \ + "flash_nfs=run nfsargs addip addmisc;bootm ${kernel_addr}\0" \ + "net_flash=run load_kernel flashargs addip addmisc;" \ + "bootm ${ram_addr}\0" \ + "net_nfs=run load_kernel nfsargs addip addmisc;" \ + "bootm ${ram_addr}\0" \ + "load_kernel=tftp ${ram_addr} " \ + "${tftppath}openwrt-ifxmips-uImage\0" \ + "update_uboot=tftp 0x80500000 ${tftppath}u-boot.bin;era 0xb0000000 +${filesize};" \ + "cp.b 0x80500000 0xb0000000 ${filesize}\0" \ + "update_openwrt=tftp ${ram_addr} " \ + "${tftppath}openwrt-ifxmips-squashfs.image;" \ + "era ${kernel_addr} +${filesize};" \ + "cp.b ${ram_addr} ${kernel_addr} ${filesize}\0" + +#define CONFIG_BOOTCOMMAND "run flash_flash" + +/* + * TFTP is using fragmented packets +*/ +#define CONFIG_IP_DEFRAG + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_CONSOLE +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_LOADB +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_NFS +#undef CONFIG_CMD_XIMG + +//#define CONFIG_CMD_ASKENV +//#define CONFIG_CMD_DHCP +//#define CONFIG_CMD_ELF +#define CONFIG_CMD_PING +//#define CONFIG_CMD_JFFS2 +//#define CONFIG_CMD_SNTP + + +/* + * Miscellaneous configurable options + */ + +#define CONFIG_LZMA + +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#ifndef CONFIG_SYS_PROMPT +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#endif +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ + +#define CONFIG_SYS_MALLOC_LEN 1024*1024 +#define CONFIG_SYS_BOOTPARAMS_LEN 128*1024 + +#define CONFIG_SYS_MIPS_TIMER_FREQ (CPU_CLOCK_RATE/2) +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_SYS_SDRAM_BASE 0x80000000 +#define CONFIG_SYS_LOAD_ADDR 0x80100000 /* default load address */ +#define CONFIG_SYS_MEMTEST_START 0x80100000 +#define CONFIG_SYS_MEMTEST_END 0x80800000 + +#define CONFIG_CMDLINE_EDITING /* add command line history */ +#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ + +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE /* include version env variable */ +#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup*/ + +#ifdef CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#endif + +#define CONFIG_LOADS_ECHO /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ + +#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1 + +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT (140) /* max number of sectors on one chip */ + +#define PHYS_FLASH_1 0xB0000000 /* Flash Bank #1 */ +#define PHYS_FLASH_2 0xB0800000 /* Flash Bank #2 */ + +/* The following #defines are needed to get flash environment right */ +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE +#define CONFIG_SYS_MONITOR_LEN (192 << 10) + +#define CONFIG_SYS_INIT_SP_OFFSET 0x400000 + +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 + +#define CONFIG_ENV_OVERWRITE 1 +#define CONFIG_ENV_IS_IN_FLASH 1 + +/* Address and size of Primary Environment Sector */ +#define CONFIG_ENV_ADDR 0xB0040000 +#define CONFIG_ENV_SIZE 0x10000 + +#ifdef CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_SWAP_ADDR +#define CONFIG_FLASH_SHOW_PROGRESS 45 + +#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT + +#define FLASH_FIXUP_ADDR_8(addr) ((void*)((ulong)(addr)^2)) +#define FLASH_FIXUP_ADDR_16(addr) ((void*)((ulong)(addr)^2)) + +#endif + +#define CONFIG_NR_DRAM_BANKS 1 + +#ifdef CONFIG_SYS_EBU_BOOT +#ifndef INFINEON_EBU_BOOTCFG +#error Please define INFINEON_EBU_BOOTCFG +#endif +#endif + +#endif /* __IFX_COMMON_H */ diff --git a/package/uboot-lantiq/gct b/package/uboot-lantiq/gct new file mode 100755 index 0000000..4054c15 --- /dev/null +++ b/package/uboot-lantiq/gct @@ -0,0 +1,165 @@ +#!/usr/bin/perl + +#use strict; +#use Cwd; +#use Env; + +my $aline; +my $lineid; +my $length; +my $address; +my @bytes; +my $addstr; +my $chsum=0; +my $count=0; +my $firstime=1; +my $i; +my $currentaddr; +my $tmp; +my $holder=""; +my $loadaddr; + +if(@ARGV < 2){ + die("\n Syntax: ./program_SDRAM input1(memory setup) input2(*\.srec) output\n"); +} + +open(INFILE1, "<$ARGV[0]") || die("\ninput1 open fail\n"); +open(INFILE2, "<$ARGV[1]") || die("\ninput2 open fail\n"); +open(OUTFILE, ">$ARGV[2]") || die("\nOutput file open fail\n"); + +$i=0; +while ($line = <INFILE1>){ + if($line=~/\w/){ + if($line!~/[;#\*]/){ + if($i eq 0){ + printf OUTFILE ("33333333"); + } + chomp($line); + $line=~s/\t//; + @array=split(/ +/,$line); + $j=0; + while(@array[$j]!~/\w/){ + $j=$j+1; + } + $addr=@array[$j]; + $regval=@array[$j+1]; + $addr=~s/0x//; + $regval=~s/0x//; + printf OUTFILE ("%08x%08x",hex($addr),hex($regval)); + $i=$i+1; + if($i eq 8){ + $i=0; + printf OUTFILE ("\n"); + } + } + } +} + +while($i lt 8 && $i gt 0){ + printf OUTFILE "00"x8; + $i=$i+1; +} + +if($i eq 8){ + printf OUTFILE ("\n"); +} + +while($aline=<INFILE2>){ + $aline=uc($aline); + chomp($aline); + next if(($aline=~/^S0/) || ($aline=~/^S7/)); + ($lineid, $length, $address, @bytes) = unpack"A2A2A8"."A2"x300, $aline; + $length = hex($length); + $address = hex($address); + $length -=5; + $i=0; + + while($length>0){ + if($firstime==1){ + $addstr = sprintf("%x", $address); + $addstr = "0"x(8-length($addstr)).$addstr; + print OUTFILE $addstr; + addchsum($addstr); + $firstime=0; + $currentaddr=$address; + $loadaddr = $addstr; + } + else{ + if($count==64){ + $addstr = sprintf("%x", $currentaddr); + $addstr = "0"x(8-length($addstr)).$addstr; + print OUTFILE $addstr; + addchsum($addstr); + $count=0; + } + #printf("*** %x != %x\n", $address, $currentaddr) if $address != $currentaddr; + } + if($currentaddr < $address) { + print OUTFILE "00"; + addchsum("00"); + $count++; + $currentaddr++; + } + else { + while($count<64){ + $bytes[$i]=~tr/ABCDEF/abcdef/; + print OUTFILE "$bytes[$i]"; + addchsum($bytes[$i]); + $i++; + $count++; + $currentaddr++; + $length--; + last if($length==0); + } + } + if($count==64){ + print OUTFILE "\n"; + #print OUTFILE "\r"; + } + } +} +if($count != 64){ + $tmp = "00"; + for($i=0;$i<(64-$count);$i++){ + print OUTFILE "00"; + addchsum($tmp); + } + print OUTFILE "\n"; + #print OUTFILE "\r"; +} + + +print OUTFILE "11"x4; +use integer; +$chsum=$chsum & 0xffffffff; +$chsum = sprintf("%X", $chsum); +$chsum = "0"x(8-length($chsum)).$chsum; +$chsum =~tr/ABCDEF/abcdef/; +print OUTFILE $chsum; +print OUTFILE "00"x60; +print OUTFILE "\n"; +#print OUTFILE "\r"; + +print OUTFILE "99"x4; +print OUTFILE $loadaddr; +print OUTFILE "00"x60; +print OUTFILE "\n"; +#print OUTFILE "\r"; + + +close OUTFILE; +#END of Program + + + +sub addchsum{ + my $cc=$_[0]; + $holder=$holder.$cc; + if(length($holder)==8){ + $holder = hex($holder); + $chsum+=$holder; + $holder=""; + } +} +#END + diff --git a/package/uboot-lantiq/patches/000-build-infos.patch b/package/uboot-lantiq/patches/000-build-infos.patch new file mode 100644 index 0000000..2afcc4c --- /dev/null +++ b/package/uboot-lantiq/patches/000-build-infos.patch @@ -0,0 +1,54 @@ +Add output like in linux kernel for current compiled file +Used normaly in combination with make option -s + +Like in following example: + +$ make -s V=1 +[CC] tools/img2srec.c +[CC] tools/bmp_logo.c +[CC] examples/hello_world.c +--- a/config.mk ++++ b/config.mk +@@ -206,17 +206,42 @@ export TEXT_BASE PLATFORM_CPPFLAGS PLATF + + ######################################################################### + ++ifndef KBUILD_VERBOSE ++ KBUILD_VERBOSE:=0 ++endif ++ifeq ("$(origin V)", "command line") ++ KBUILD_VERBOSE:=$(V) ++endif ++ifeq (,$(findstring s,$(MAKEFLAGS))) ++ KBUILD_VERBOSE:=0 ++endif ++ ++ifneq ($(KBUILD_VERBOSE),0) ++ define MESSAGE ++ @printf " %s %s/%s\n" $(1) $(2) $(3) ++ endef ++else ++ define MESSAGE ++ endef ++endif ++ + # Allow boards to use custom optimize flags on a per dir/file basis + BCURDIR := $(notdir $(CURDIR)) ++ + $(obj)%.s: %.S ++ $(call MESSAGE, [CPP],$(subst $(SRCTREE)/,,$(CURDIR)),$<) + $(CPP) $(AFLAGS) $(AFLAGS_$(@F)) $(AFLAGS_$(BCURDIR)) -o $@ $< + $(obj)%.o: %.S ++ $(call MESSAGE, [AS], $(subst $(SRCTREE)/,,$(CURDIR)),$<) + $(CC) $(AFLAGS) $(AFLAGS_$(@F)) $(AFLAGS_$(BCURDIR)) -o $@ $< -c + $(obj)%.o: %.c ++ $(call MESSAGE, [CC], $(subst $(SRCTREE)/,,$(CURDIR)),$<) + $(CC) $(CFLAGS) $(CFLAGS_$(@F)) $(CFLAGS_$(BCURDIR)) -o $@ $< -c + $(obj)%.i: %.c ++ $(call MESSAGE, [CPP],$(subst $(SRCTREE)/,,$(CURDIR)),$<) + $(CPP) $(CFLAGS) $(CFLAGS_$(@F)) $(CFLAGS_$(BCURDIR)) -o $@ $< -c + $(obj)%.s: %.c ++ $(call MESSAGE, [CC], $(subst $(SRCTREE)/,,$(CURDIR)),$<) + $(CC) $(CFLAGS) $(CFLAGS_$(@F)) $(CFLAGS_$(BCURDIR)) -o $@ $< -c -S + + ######################################################################### diff --git a/package/uboot-lantiq/patches/010-fix-mips-flags.patch b/package/uboot-lantiq/patches/010-fix-mips-flags.patch new file mode 100644 index 0000000..4c706a7 --- /dev/null +++ b/package/uboot-lantiq/patches/010-fix-mips-flags.patch @@ -0,0 +1,23 @@ +--- a/cpu/mips/config.mk ++++ b/cpu/mips/config.mk +@@ -23,16 +23,18 @@ + v=$(shell $(AS) --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+' | cut -d. -f2) + MIPSFLAGS:=$(shell \ + if [ "$v" -lt "14" ]; then \ +- echo "-mcpu=4kc"; \ ++ echo "-mcpu=mips32"; \ + else \ +- echo "-march=4kc -mtune=4kc"; \ ++ echo "-mips32 -march=mips32 -mtune=mips32"; \ + fi) + ++ifndef ENDIANNESS + ifneq (,$(findstring 4KCle,$(CROSS_COMPILE))) + ENDIANNESS = -EL + else + ENDIANNESS = -EB + endif ++endif + + MIPSFLAGS += $(ENDIANNESS) + diff --git a/package/uboot-lantiq/patches/050-mips-enhancements.patch b/package/uboot-lantiq/patches/050-mips-enhancements.patch new file mode 100644 index 0000000..d056467 --- /dev/null +++ b/package/uboot-lantiq/patches/050-mips-enhancements.patch @@ -0,0 +1,124 @@ +--- a/cpu/mips/start.S ++++ b/cpu/mips/start.S +@@ -69,6 +69,9 @@ _start: + #elif defined(CONFIG_PURPLE) + .word INFINEON_EBU_BOOTCFG /* EBU init code, fetched during booting */ + .word INFINEON_EBU_BOOTCFG /* EBU init code, fetched during booting */ ++#elif defined(CONFIG_SYS_EBU_BOOT) ++ .word INFINEON_EBU_BOOTCFG /* EBU init code, fetched during booting */ ++ .word 0x00000000 /* phase of the flash */ + #else + RVECENT(romReserved,2) + #endif +@@ -202,7 +205,25 @@ _start: + * 128 * 8 == 1024 == 0x400 + * so this is address R_VEC+0x400 == 0xbfc00400 + */ +-#ifdef CONFIG_PURPLE ++#ifndef CONFIG_PURPLE ++ XVECENT(romExcHandle,0x400); /* bfc00400: Int, CauseIV=1 */ ++ RVECENT(romReserved,129); ++ RVECENT(romReserved,130); ++ RVECENT(romReserved,131); ++ RVECENT(romReserved,132); ++ RVECENT(romReserved,133); ++ RVECENT(romReserved,134); ++ RVECENT(romReserved,135); ++ RVECENT(romReserved,136); ++ RVECENT(romReserved,137); ++ RVECENT(romReserved,138); ++ RVECENT(romReserved,139); ++ RVECENT(romReserved,140); ++ RVECENT(romReserved,141); ++ RVECENT(romReserved,142); ++ RVECENT(romReserved,143); ++ XVECENT(romExcHandle,0x480); /* bfc00480: EJTAG debug exception */ ++#else /* CONFIG_PURPLE */ + /* 0xbfc00400 */ + .word 0xdc870000 + .word 0xfca70000 +@@ -228,6 +249,12 @@ _start: + #endif /* CONFIG_PURPLE */ + .align 4 + reset: ++#ifdef CONFIG_SYS_MIPS_MULTI_CPU ++ mfc0 k0, CP0_EBASE ++ and k0, EBASEF_CPUNUM ++ bne k0, zero, ifx_mips_handler_cpux ++ nop ++#endif + + /* Clear watch registers. + */ +@@ -239,6 +266,16 @@ reset: + + setup_c0_status_reset + ++#if defined(CONFIG_MIPS24KEC) || defined(CONFIG_MIPS34KC) ++ /* CONFIG7 register */ ++ /* Erratum "RPS May Cause Incorrect Instruction Execution" ++ * for 24KEC and 34KC */ ++ mfc0 k0, CP0_CONFIG, 7 ++ li k1, MIPS_CONF7_RPS ++ or k0, k1 ++ mtc0 k0, CP0_CONFIG, 7 ++#endif ++ + /* Init Timer */ + mtc0 zero, CP0_COUNT + mtc0 zero, CP0_COMPARE +@@ -270,9 +307,12 @@ reset: + jalr t9 + nop + ++#ifndef CONFIG_SYS_MIPS_CACHE_OPER_MODE ++#define CONFIG_SYS_MIPS_CACHE_OPER_MODE CONF_CM_CACHABLE_NONCOHERENT ++#endif + /* ... and enable them. + */ +- li t0, CONF_CM_CACHABLE_NONCOHERENT ++ li t0, CONFIG_SYS_MIPS_CACHE_OPER_MODE + mtc0 t0, CP0_CONFIG + #endif /* !CONFIG_SKIP_LOWLEVEL_INIT */ + +@@ -419,3 +459,15 @@ romReserved: + + romExcHandle: + b romExcHandle ++ ++ /* Additional handlers. ++ */ ++#ifdef CONFIG_SYS_MIPS_MULTI_CPU ++/* ++ * Stop Slave CPUs ++ */ ++ifx_mips_handler_cpux: ++ wait; ++ b ifx_mips_handler_cpux; ++ nop; ++#endif +--- a/include/asm-mips/mipsregs.h ++++ b/include/asm-mips/mipsregs.h +@@ -57,6 +57,7 @@ + #define CP0_CAUSE $13 + #define CP0_EPC $14 + #define CP0_PRID $15 ++#define CP0_EBASE $15,1 + #define CP0_CONFIG $16 + #define CP0_LLADDR $17 + #define CP0_WATCHLO $18 +@@ -395,6 +396,14 @@ + #define CAUSEF_BD (_ULCAST_(1) << 31) + + /* ++ * Bits in the coprocessor 0 EBase register ++ */ ++#define EBASEB_CPUNUM 0 ++#define EBASEF_CPUNUM (0x3ff << EBASEB_CPUNUM) ++#define EBASEB_EXPBASE 12 ++#define EBASEF_EXPBASE (0x3ffff << EBASEB_EXPBASE) ++ ++/* + * Bits in the coprocessor 0 config register. + */ + /* Generic bits. */ diff --git a/package/uboot-lantiq/patches/062-cfi-addr-fixup.patch b/package/uboot-lantiq/patches/062-cfi-addr-fixup.patch new file mode 100644 index 0000000..8f95da1 --- /dev/null +++ b/package/uboot-lantiq/patches/062-cfi-addr-fixup.patch @@ -0,0 +1,225 @@ +--- a/drivers/mtd/cfi_flash.c ++++ b/drivers/mtd/cfi_flash.c +@@ -85,6 +85,22 @@ flash_info_t flash_info[CFI_MAX_FLASH_BA + #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT + #endif + ++/* ++ * Check if address fixup macros are defined, define defaults otherwise ++ */ ++#ifndef FLASH_FIXUP_ADDR_8 ++#define FLASH_FIXUP_ADDR_8(addr) (addr) ++#endif ++#ifndef FLASH_FIXUP_ADDR_16 ++#define FLASH_FIXUP_ADDR_16(addr) (addr) ++#endif ++#ifndef FLASH_FIXUP_ADDR_32 ++#define FLASH_FIXUP_ADDR_32(addr) (addr) ++#endif ++#ifndef FLASH_FIXUP_ADDR_64 ++#define FLASH_FIXUP_ADDR_64(addr) (addr) ++#endif ++ + static void __flash_write8(u8 value, void *addr) + { + __raw_writeb(value, addr); +@@ -264,9 +280,9 @@ static inline uchar flash_read_uchar (fl + + cp = flash_map (info, 0, offset); + #if defined(__LITTLE_ENDIAN) || defined(CONFIG_SYS_WRITE_SWAPPED_DATA) +- retval = flash_read8(cp); ++ retval = flash_read8(FLASH_FIXUP_ADDR_8(cp)); + #else +- retval = flash_read8(cp + info->portwidth - 1); ++ retval = flash_read8(FLASH_FIXUP_ADDR_8(cp) + info->portwidth - 1); + #endif + flash_unmap (info, 0, offset, cp); + return retval; +@@ -280,7 +296,7 @@ static inline ushort flash_read_word (fl + ushort *addr, retval; + + addr = flash_map (info, 0, offset); +- retval = flash_read16 (addr); ++ retval = flash_read16 (FLASH_FIXUP_ADDR_16(addr)); + flash_unmap (info, 0, offset, addr); + return retval; + } +@@ -305,19 +321,28 @@ static ulong flash_read_long (flash_info + debug ("long addr is at %p info->portwidth = %d\n", addr, + info->portwidth); + for (x = 0; x < 4 * info->portwidth; x++) { +- debug ("addr[%x] = 0x%x\n", x, flash_read8(addr + x)); ++ debug ("addr[%x] = 0x%x\n", x, ++ flash_read8(FLASH_FIXUP_ADDR_32(addr) + x)); + } + #endif + #if defined(__LITTLE_ENDIAN) || defined(CONFIG_SYS_WRITE_SWAPPED_DATA) +- retval = ((flash_read8(addr) << 16) | +- (flash_read8(addr + info->portwidth) << 24) | +- (flash_read8(addr + 2 * info->portwidth)) | +- (flash_read8(addr + 3 * info->portwidth) << 8)); ++ retval = ((flash_read8(FLASH_FIXUP_ADDR_8 ++ (addr) << 16) | ++ (flash_read8(FLASH_FIXUP_ADDR_8 ++ (addr + info->portwidth)) << 24) | ++ (flash_read8(FLASH_FIXUP_ADDR_8 ++ (addr + 2 * info->portwidth))) | ++ (flash_read8(FLASH_FIXUP_ADDR_8 ++ (addr + 3 * info->portwidth)) << 8)); + #else +- retval = ((flash_read8(addr + 2 * info->portwidth - 1) << 24) | +- (flash_read8(addr + info->portwidth - 1) << 16) | +- (flash_read8(addr + 4 * info->portwidth - 1) << 8) | +- (flash_read8(addr + 3 * info->portwidth - 1))); ++ retval = ((flash_read8(FLASH_FIXUP_ADDR_8 ++ (addr + 2 * info->portwidth - 1)) << 24) | ++ (flash_read8(FLASH_FIXUP_ADDR_8 ++ (addr + info->portwidth - 1)) << 16) | ++ (flash_read8(FLASH_FIXUP_ADDR_8 ++ (addr + 4 * info->portwidth - 1)) << 8) | ++ (flash_read8(FLASH_FIXUP_ADDR_8 ++ (addr + 3 * info->portwidth - 1)))); + #endif + flash_unmap(info, sect, offset, addr); + +@@ -338,21 +363,22 @@ void flash_write_cmd (flash_info_t * inf + flash_make_cmd (info, cmd, &cword); + switch (info->portwidth) { + case FLASH_CFI_8BIT: +- debug ("fwc addr %p cmd %x %x 8bit x %d bit\n", addr, cmd, +- cword.c, info->chipwidth << CFI_FLASH_SHIFT_WIDTH); +- flash_write8(cword.c, addr); ++ debug ("fwc addr %p cmd %x %x 8bit x %d bit\n", ++ FLASH_FIXUP_ADDR_8(addr), cmd, cword.c, ++ info->chipwidth << CFI_FLASH_SHIFT_WIDTH); ++ flash_write8(cword.c, FLASH_FIXUP_ADDR_8(addr)); + break; + case FLASH_CFI_16BIT: +- debug ("fwc addr %p cmd %x %4.4x 16bit x %d bit\n", addr, +- cmd, cword.w, ++ debug ("fwc addr %p cmd %x %4.4x 16bit x %d bit\n", ++ FLASH_FIXUP_ADDR_16(addr), cmd, cword.w, + info->chipwidth << CFI_FLASH_SHIFT_WIDTH); +- flash_write16(cword.w, addr); ++ flash_write16(cword.w, FLASH_FIXUP_ADDR_16(addr)); + break; + case FLASH_CFI_32BIT: +- debug ("fwc addr %p cmd %x %8.8lx 32bit x %d bit\n", addr, +- cmd, cword.l, ++ debug ("fwc addr %p cmd %x %8.8lx 32bit x %d bit\n", ++ FLASH_FIXUP_ADDR_32(addr), cmd, cword.l, + info->chipwidth << CFI_FLASH_SHIFT_WIDTH); +- flash_write32(cword.l, addr); ++ flash_write32(cword.l, FLASH_FIXUP_ADDR_32(addr)); + break; + case FLASH_CFI_64BIT: + #ifdef DEBUG +@@ -362,11 +388,11 @@ void flash_write_cmd (flash_info_t * inf + print_longlong (str, cword.ll); + + debug ("fwrite addr %p cmd %x %s 64 bit x %d bit\n", +- addr, cmd, str, ++ FLASH_FIXUP_ADDR_64(addr), cmd, str, + info->chipwidth << CFI_FLASH_SHIFT_WIDTH); + } + #endif +- flash_write64(cword.ll, addr); ++ flash_write64(cword.ll, FLASH_FIXUP_ADDR_64(addr)); + break; + } + +@@ -397,16 +423,19 @@ static int flash_isequal (flash_info_t * + debug ("is= cmd %x(%c) addr %p ", cmd, cmd, addr); + switch (info->portwidth) { + case FLASH_CFI_8BIT: +- debug ("is= %x %x\n", flash_read8(addr), cword.c); +- retval = (flash_read8(addr) == cword.c); ++ debug ("is= %x %x\n", ++ flash_read8(FLASH_FIXUP_ADDR_8(addr)), cword.c); ++ retval = (flash_read8(FLASH_FIXUP_ADDR_8(addr)) == cword.c); + break; + case FLASH_CFI_16BIT: +- debug ("is= %4.4x %4.4x\n", flash_read16(addr), cword.w); +- retval = (flash_read16(addr) == cword.w); ++ debug ("is= %4.4x %4.4x\n", ++ flash_read16(FLASH_FIXUP_ADDR_16(addr)), cword.w); ++ retval = (flash_read16(FLASH_FIXUP_ADDR_16(addr)) == cword.w); + break; + case FLASH_CFI_32BIT: +- debug ("is= %8.8x %8.8lx\n", flash_read32(addr), cword.l); +- retval = (flash_read32(addr) == cword.l); ++ debug ("is= %8.8x %8.8lx\n", ++ flash_read32(FLASH_FIXUP_ADDR_32(addr)), cword.l); ++ retval = (flash_read32(FLASH_FIXUP_ADDR_32(addr)) == cword.l); + break; + case FLASH_CFI_64BIT: + #ifdef DEBUG +@@ -414,12 +443,13 @@ static int flash_isequal (flash_info_t * + char str1[20]; + char str2[20]; + +- print_longlong (str1, flash_read64(addr)); ++ print_longlong (str1, flash_read64(FLASH_FIXUP_ADDR_64 ++ (addr))); + print_longlong (str2, cword.ll); + debug ("is= %s %s\n", str1, str2); + } + #endif +- retval = (flash_read64(addr) == cword.ll); ++ retval = (flash_read64(FLASH_FIXUP_ADDR_64(addr)) == cword.ll); + break; + default: + retval = 0; +@@ -443,16 +473,20 @@ static int flash_isset (flash_info_t * i + flash_make_cmd (info, cmd, &cword); + switch (info->portwidth) { + case FLASH_CFI_8BIT: +- retval = ((flash_read8(addr) & cword.c) == cword.c); ++ retval = ((flash_read8(FLASH_FIXUP_ADDR_8(addr)) ++ & cword.c) == cword.c); + break; + case FLASH_CFI_16BIT: +- retval = ((flash_read16(addr) & cword.w) == cword.w); ++ retval = ((flash_read16(FLASH_FIXUP_ADDR_16(addr)) ++ & cword.w) == cword.w); + break; + case FLASH_CFI_32BIT: +- retval = ((flash_read32(addr) & cword.l) == cword.l); ++ retval = ((flash_read32(FLASH_FIXUP_ADDR_32(addr)) ++ & cword.l) == cword.l); + break; + case FLASH_CFI_64BIT: +- retval = ((flash_read64(addr) & cword.ll) == cword.ll); ++ retval = ((flash_read64(FLASH_FIXUP_ADDR_64(addr)) ++ & cword.ll) == cword.ll); + break; + default: + retval = 0; +@@ -476,17 +510,22 @@ static int flash_toggle (flash_info_t * + flash_make_cmd (info, cmd, &cword); + switch (info->portwidth) { + case FLASH_CFI_8BIT: +- retval = flash_read8(addr) != flash_read8(addr); ++ retval = flash_read8(FLASH_FIXUP_ADDR_8(addr)) != ++ flash_read8(FLASH_FIXUP_ADDR_8(addr)); + break; + case FLASH_CFI_16BIT: +- retval = flash_read16(addr) != flash_read16(addr); ++ retval = flash_read16(FLASH_FIXUP_ADDR_16(addr)) != ++ flash_read16(FLASH_FIXUP_ADDR_16(addr)); + break; + case FLASH_CFI_32BIT: +- retval = flash_read32(addr) != flash_read32(addr); ++ retval = flash_read32(FLASH_FIXUP_ADDR_32(addr)) != ++ flash_read32(FLASH_FIXUP_ADDR_32(addr)); + break; + case FLASH_CFI_64BIT: +- retval = ( (flash_read32( addr ) != flash_read32( addr )) || +- (flash_read32(addr+4) != flash_read32(addr+4)) ); ++ retval = ( (flash_read32(FLASH_FIXUP_ADDR_64( addr )) != ++ flash_read32(FLASH_FIXUP_ADDR_64( addr ))) || ++ (flash_read32(FLASH_FIXUP_ADDR_64(addr+4)) != ++ flash_read32(FLASH_FIXUP_ADDR_64(addr+4))) ); + break; + default: + retval = 0; diff --git a/package/uboot-lantiq/patches/100-ifx_targets.patch b/package/uboot-lantiq/patches/100-ifx_targets.patch new file mode 100644 index 0000000..9c313e0 --- /dev/null +++ b/package/uboot-lantiq/patches/100-ifx_targets.patch @@ -0,0 +1,112 @@ +--- a/MAKEALL ++++ b/MAKEALL +@@ -709,6 +709,12 @@ LIST_arm=" \ + ## MIPS Systems (default = big endian) + ######################################################################### + ++LIST_ifxcpe=" \ ++ easy50712 \ ++ easy50712_DDR166M \ ++ easy50712_DDR166M_ramboot \ ++" ++ + LIST_mips4kc=" \ + incaip \ + qemu_mips \ +@@ -740,6 +746,7 @@ LIST_au1xx0=" \ + " + + LIST_mips=" \ ++ ${LIST_ifxcpe} \ + ${LIST_mips4kc} \ + ${LIST_mips5kc} \ + ${LIST_au1xx0} \ +--- a/Makefile ++++ b/Makefile +@@ -474,7 +475,7 @@ $(obj)include/autoconf.mk: $(obj)include + set -e ; \ + : Extract the config macros ; \ + $(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \ +- sed -n -f tools/scripts/define2mk.sed > $@.tmp && \ ++ sed -n -f tools/scripts/define2mk.sed |sort > $@.tmp && \ + mv $@.tmp $@ + + ######################################################################### +@@ -3354,7 +3355,7 @@ incaip_config: unconfig + { echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h ; \ + $(XECHO) "... with 150MHz system clock" ; \ + } +- @$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip ++ @$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip infineon + + tb0229_config: unconfig + @$(MKCONFIG) $(@:_config=) mips mips tb0229 +@@ -3395,6 +3396,30 @@ vct_platinumavc_onenand_small_config: un + @$(MKCONFIG) -a vct mips mips vct micronas + + ######################################################################### ++## MIPS32 ifxcpe ++######################################################################### ++ ++easy50712%config : unconfig ++ @mkdir -p $(obj)include ++ @mkdir -p $(obj)board/infineon/easy50712 ++ @[ -z "$(findstring ramboot,$@)" ] || \ ++ { echo "TEXT_BASE = 0xA0400000" >$(obj)board/infineon/easy50712/config.tmp ; \ ++ echo "#define CONFIG_SYS_RAMBOOT" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with ramboot configuration" ; \ ++ } ++ @if [ "$(findstring _DDR,$@)" ] ; then \ ++ echo "#define CONFIG_USE_DDR_RAM" >>$(obj)include/config.h ; \ ++ DDR=$(subst DDR,,$(filter DDR%,$(subst _, ,$@))); \ ++ case "$${DDR}" in \ ++ 111M|166M|e111M|e166M|promos400|samsung166|psc166) \ ++ $(XECHO) "... with DDR RAM config $${DDR}" ; \ ++ echo "#define CONFIG_USE_DDR_RAM_CFG_$${DDR}" >>$(obj)include/config.h ;; \ ++ *) $(XECHO) "... DDR RAM config \\\"$${DDR}\\\" unknown, use default"; \ ++ esac; \ ++ fi ++ @$(MKCONFIG) -a $(word 1,$(subst _, ,$@)) mips mips easy50712 infineon danube ++ ++######################################################################### + ## MIPS32 AU1X00 + ######################################################################### + +--- a/drivers/serial/Makefile ++++ b/drivers/serial/Makefile +@@ -28,6 +28,7 @@ LIB := $(obj)libserial.a + COBJS-$(CONFIG_ARM_DCC) += arm_dcc.o + COBJS-$(CONFIG_AT91RM9200_USART) += at91rm9200_usart.o + COBJS-$(CONFIG_ATMEL_USART) += atmel_usart.o ++COBJS-$(CONFIG_IFX_ASC) += ifx_asc.o + COBJS-$(CONFIG_MCFUART) += mcfuart.o + COBJS-$(CONFIG_NS9750_UART) += ns9750_serial.o + COBJS-$(CONFIG_SYS_NS16550) += ns16550.o +--- a/drivers/net/Makefile ++++ b/drivers/net/Makefile +@@ -41,6 +41,7 @@ COBJS-$(CONFIG_FEC_MXC) += fec_mxc.o + COBJS-$(CONFIG_FSLDMAFEC) += fsl_mcdmafec.o mcfmii.o + COBJS-$(CONFIG_FTMAC100) += ftmac100.o + COBJS-$(CONFIG_GRETH) += greth.o ++COBJS-$(CONFIG_IFX_ETOP) += ifx_etop.o + COBJS-$(CONFIG_INCA_IP_SWITCH) += inca-ip_sw.o + COBJS-$(CONFIG_KIRKWOOD_EGIGA) += kirkwood_egiga.o + COBJS-$(CONFIG_DRIVER_KS8695ETH) += ks8695eth.o +--- a/include/netdev.h ++++ b/include/netdev.h +@@ -55,6 +55,7 @@ int fecmxc_initialize (bd_t *bis); + int ftmac100_initialize(bd_t *bits); + int greth_initialize(bd_t *bis); + void gt6426x_eth_initialize(bd_t *bis); ++int ifx_etop_initialize(bd_t *bis); + int inca_switch_initialize(bd_t *bis); + int kirkwood_egiga_initialize(bd_t *bis); + int macb_eth_initialize(int id, void *regs, unsigned int phy_addr); +@@ -82,6 +83,7 @@ int uec_standard_init(bd_t *bis); + int uli526x_initialize(bd_t *bis); + int sh_eth_initialize(bd_t *bis); + int dm9000_initialize(bd_t *bis); ++int lq_eth_initialize(bd_t * bis); + + /* Boards with PCI network controllers can call this from their board_eth_init() + * function to initialize whatever's on board. diff --git a/package/uboot-lantiq/patches/200-portability.patch b/package/uboot-lantiq/patches/200-portability.patch new file mode 100644 index 0000000..ae38ad6 --- /dev/null +++ b/package/uboot-lantiq/patches/200-portability.patch @@ -0,0 +1,31 @@ +--- a/tools/kwbimage.c ++++ b/tools/kwbimage.c +@@ -206,6 +206,28 @@ INVL_DATA: + exit (EXIT_FAILURE); + } + ++#ifndef __GLIBC__ ++static ssize_t ++getline(char **line, size_t *len, FILE *fd) ++{ ++ char *tmp; ++ int tmplen; ++ ++ tmp = fgetln(fd, &tmplen); ++ if (!tmp) ++ return -1; ++ ++ if (!*line || tmplen > *len) { ++ *len = tmplen + 1; ++ *line = realloc(*line, *len); ++ } ++ ++ strncpy(*line, tmp, tmplen); ++ line[tmplen] = 0; ++ return tmplen; ++} ++#endif ++ + /* + * this function sets the kwbimage header by- + * 1. Abstracting input command line arguments data |