summaryrefslogtreecommitdiff
path: root/package
diff options
context:
space:
mode:
Diffstat (limited to 'package')
-rw-r--r--package/comgt/Makefile1
-rw-r--r--package/comgt/files/3g.sh53
-rw-r--r--package/comgt/files/evdo.chat17
3 files changed, 47 insertions, 24 deletions
diff --git a/package/comgt/Makefile b/package/comgt/Makefile
index 606f2f1..2cbfec5 100644
--- a/package/comgt/Makefile
+++ b/package/comgt/Makefile
@@ -48,6 +48,7 @@ define Package/comgt/install
$(INSTALL_BIN) ./files/3g.connect $(1)/etc/ppp/3g.connect
$(INSTALL_DIR) $(1)/etc/chatscripts
$(INSTALL_DATA) ./files/3g.chat $(1)/etc/chatscripts/3g.chat
+ $(INSTALL_DATA) ./files/evdo.chat $(1)/etc/chatscripts/evdo.chat
$(INSTALL_DIR) $(1)/lib/network
$(INSTALL_DATA) ./files/3g.sh $(1)/lib/network/3g.sh
$(INSTALL_DIR) $(1)/etc/hotplug.d/button
diff --git a/package/comgt/files/3g.sh b/package/comgt/files/3g.sh
index 5274821..2859a1b 100644
--- a/package/comgt/files/3g.sh
+++ b/package/comgt/files/3g.sh
@@ -36,6 +36,7 @@ stop_interface_3g() {
setup_interface_3g() {
local iface="$1"
local config="$2"
+ local chat="/etc/chatscripts/3g.chat"
config_get device "$config" device
@@ -51,30 +52,35 @@ setup_interface_3g() {
set_3g_led 1 0 1
# figure out hardware specific commands for the card
- if gcom -d "$device" -s /etc/gcom/getcardinfo.gcom | grep Novatel 2>/dev/null >/dev/null; then
- case "$service" in
- umts_only) CODE=2;;
- gprs_only) CODE=1;;
- *) CODE=0;;
- esac
- mode="AT\$NWRAT=${CODE},2"
- else
- case "$service" in
- umts_only) CODE=1;;
- gprs_only) CODE=0;;
- *) CODE=3;;
- esac
- mode="AT_OPSYS=${CODE}"
- fi
-
- PINCODE="$pincode" gcom -d "$device" -s /etc/gcom/setpin.gcom || {
- echo "$cfg(3g): Failed to set the PIN code."
- set_3g_led 0 0 0
- return 1
- }
- MODE="$mode" gcom -d "$device" -s /etc/gcom/setmode.gcom
+ case "$service" in
+ cdma|evdo) chat="/etc/chatscripts/evdo.chat";;
+ *)
+ if gcom -d "$device" -s /etc/gcom/getcardinfo.gcom | grep Novatel 2>/dev/null >/dev/null; then
+ case "$service" in
+ umts_only) CODE=2;;
+ gprs_only) CODE=1;;
+ *) CODE=0;;
+ esac
+ mode="AT\$NWRAT=${CODE},2"
+ else
+ case "$service" in
+ umts_only) CODE=1;;
+ gprs_only) CODE=0;;
+ *) CODE=3;;
+ esac
+ mode="AT_OPSYS=${CODE}"
+ fi
+
+ PINCODE="$pincode" gcom -d "$device" -s /etc/gcom/setpin.gcom || {
+ echo "$cfg(3g): Failed to set the PIN code."
+ set_3g_led 0 0 0
+ return 1
+ }
+ MODE="$mode" gcom -d "$device" -s /etc/gcom/setmode.gcom
+ esac
set_3g_led 1 0 0
+ config_set "$config" "connect" "${apn:+USE_APN=$apn }/usr/sbin/chat -t5 -f $chat"
start_pppd "$config" \
noaccomp \
nopcomp \
@@ -83,7 +89,6 @@ setup_interface_3g() {
noauth \
lock \
crtscts \
- connect "USE_APN=\"$apn\" /etc/ppp/3g.connect" \
${mtu:+mtu $mtu mru $mtu} \
- 460800 "$device"
+ 115200 "$device"
}
diff --git a/package/comgt/files/evdo.chat b/package/comgt/files/evdo.chat
new file mode 100644
index 0000000..de49e41
--- /dev/null
+++ b/package/comgt/files/evdo.chat
@@ -0,0 +1,17 @@
+# This is a simple chat script based off of the one provided by Sierra Wireless
+# for CDMA connections. It should work for both Sprint and Verizon networks.
+
+ABORT BUSY
+ABORT 'NO CARRIER'
+ABORT ERROR
+ABORT 'NO DIAL TONE'
+ABORT 'NO ANSWER'
+ABORT DELAYED
+REPORT CONNECT
+TIMEOUT 10
+'' AT
+OK ATZ
+SAY 'Calling CDMA/EVDO'
+TIMEOUT 30
+OK ATDT#777
+CONNECT ''