diff options
Diffstat (limited to 'package')
| -rw-r--r-- | package/madwifi/ath_hal-20080528.tgz | bin | 3809778 -> 0 bytes | |||
| -rw-r--r-- | package/madwifi/ath_hal-20080815.tgz | bin | 0 -> 6055065 bytes | |||
| -rw-r--r-- | package/madwifi/patches/450-new_hal.patch | 135 |
3 files changed, 135 insertions, 0 deletions
diff --git a/package/madwifi/ath_hal-20080528.tgz b/package/madwifi/ath_hal-20080528.tgz Binary files differdeleted file mode 100644 index 3f077f6..0000000 --- a/package/madwifi/ath_hal-20080528.tgz +++ /dev/null diff --git a/package/madwifi/ath_hal-20080815.tgz b/package/madwifi/ath_hal-20080815.tgz Binary files differnew file mode 100644 index 0000000..5916d05 --- /dev/null +++ b/package/madwifi/ath_hal-20080815.tgz diff --git a/package/madwifi/patches/450-new_hal.patch b/package/madwifi/patches/450-new_hal.patch new file mode 100644 index 0000000..5171ce2 --- /dev/null +++ b/package/madwifi/patches/450-new_hal.patch @@ -0,0 +1,135 @@ +--- a/ath_hal/ah_os.h ++++ b/ath_hal/ah_os.h +@@ -156,80 +156,23 @@ + #endif + #endif /* AH_BYTE_ORDER */ + +-/* +- * Some big-endian architectures don't set CONFIG_GENERIC_IOMAP, but fail to +- * implement iowrite32be and ioread32be. Provide compatibility macros when +- * it's needed. +- * +- * As of Linux 2.6.24, only MIPS, PARISC and PowerPC implement iowrite32be and +- * ioread32be as functions. +- * +- * The downside or the replacement macros it that we may be byte-swapping data +- * for the second time, so the native implementations should be preferred. +- */ +-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,12)) && \ +- !defined(CONFIG_GENERIC_IOMAP) && (AH_BYTE_ORDER == AH_BIG_ENDIAN) && \ +- !defined(__mips__) && !defined(__hppa__) && !defined(__powerpc__) +-# ifndef iowrite32be +-# define iowrite32be(_val, _addr) iowrite32(swab32((_val)), (_addr)) +-# endif +-# ifndef ioread32be +-# define ioread32be(_addr) swab32(ioread32((_addr))) +-# endif +-#endif ++#define IS_SWAPPED(_ah, _reg) \ ++ ((_ah)->ah_swapped && \ ++ (((0x4000 <= (_reg)) && ((_reg) < 0x5000)) || \ ++ ((0x7000 <= (_reg)) && ((_reg) < 0x8000)))) ++ ++#define SWAPREG(_ah, _reg, _val) \ ++ (IS_SWAPPED(_ah, _reg) ? cpu_to_le32(_val) : (_val)) + + /* + * The register accesses are done using target-specific functions when + * debugging is enabled (AH_DEBUG) or it's explicitly requested for the target. +- * +- * The hardware registers use little-endian byte order natively. Big-endian +- * systems are configured by HAL to enable hardware byte-swap of register reads +- * and writes at reset. This avoid the need to byte-swap the data in software. +- * However, the registers in a certain area from 0x4000 to 0x4fff (PCI clock +- * domain registers) are not byte swapped! +- * +- * Since Linux I/O primitives default to little-endian operations, we only +- * need to suppress byte-swapping on big-endian systems outside the area used +- * by the PCI clock domain registers. + */ +-#if (AH_BYTE_ORDER == AH_BIG_ENDIAN) +-#define is_reg_le(__reg) ((0x4000 <= (__reg) && (__reg) < 0x5000)) +-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,12) +-#define _OS_REG_WRITE(_ah, _reg, _val) do { \ +- is_reg_le(_reg) ? \ +- iowrite32((_val), (_ah)->ah_sh + (_reg)) : \ +- iowrite32be((_val), (_ah)->ah_sh + (_reg)); \ +- } while (0) +-#define _OS_REG_READ(_ah, _reg) \ +- (is_reg_le(_reg) ? \ +- ioread32((_ah)->ah_sh + (_reg)) : \ +- ioread32be((_ah)->ah_sh + (_reg))) +-#else +-#define _OS_REG_WRITE(_ah, _reg, _val) do { \ +- writel(is_reg_le(_reg) ? \ +- (_val) : cpu_to_le32(_val), \ +- (_ah)->ah_sh + (_reg)); \ +- } while (0) +-#define _OS_REG_READ(_ah, _reg) \ +- (is_reg_le(_reg) ? \ +- readl((_ah)->ah_sh + (_reg)) : \ +- cpu_to_le32(readl((_ah)->ah_sh + (_reg)))) +-#endif /* KERNEL_VERSION(2,6,12) */ +-#else /* AH_BYTE_ORDER != AH_BIG_ENDIAN */ +-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,12) +-#define _OS_REG_WRITE(_ah, _reg, _val) do { \ +- iowrite32((_val), (_ah)->ah_sh + (_reg)); \ +- } while (0) +-#define _OS_REG_READ(_ah, _reg) \ +- ioread32((_ah)->ah_sh + (_reg)) +-#else + #define _OS_REG_WRITE(_ah, _reg, _val) do { \ +- writel((_val), (_ah)->ah_sh + (_reg)); \ +- } while (0) ++ __raw_writel(SWAPREG(_ah, _reg, _val), (_ah)->ah_sh + (_reg)); \ ++} while (0) + #define _OS_REG_READ(_ah, _reg) \ +- readl((_ah)->ah_sh + (_reg)) +-#endif /* KERNEL_VERSION(2,6,12) */ +-#endif /* AH_BYTE_ORDER != AH_BIG_ENDIAN */ ++ SWAPREG(_ah, _reg, __raw_readl((_ah)->ah_sh + (_reg))) + + /* + * The functions in this section are not intended to be invoked by MadWifi +--- a/ath/if_ath.c ++++ b/ath/if_ath.c +@@ -592,6 +592,14 @@ + } + sc->sc_ah = ah; + ++ /* WAR for AR7100 PCI bug */ ++#ifdef CONFIG_ATHEROS_AR71XX ++ if ((ar_device(sc->devid) >= 5210) && (ar_device(sc->devid) < 5416)) { ++ ath_hal_setcapability(ah, HAL_CAP_DMABURST_RX, 0, HAL_DMABURST_4B, NULL); ++ ath_hal_setcapability(ah, HAL_CAP_DMABURST_TX, 0, HAL_DMABURST_4B, NULL); ++ } ++#endif ++ + /* + * Check if the MAC has multi-rate retry support. + * We do this by trying to setup a fake extended +@@ -7348,7 +7356,7 @@ + if (qtype == HAL_TX_QUEUE_UAPSD) + qi.tqi_qflags = HAL_TXQ_TXDESCINT_ENABLE; + else +- qi.tqi_qflags = HAL_TXQ_TXEOLINT_ENABLE | ++ qi.tqi_qflags = HAL_TXQ_TXEOLINT_ENABLE | HAL_TXQ_TXOKINT_ENABLE | + HAL_TXQ_TXDESCINT_ENABLE; + qnum = ath_hal_setuptxqueue(ah, qtype, &qi); + if (qnum == -1) { +--- a/ath_hal/ah_os.c ++++ b/ath_hal/ah_os.c +@@ -126,6 +126,13 @@ + } + EXPORT_SYMBOL(ath_hal_printf); + ++void __ahdecl ++ath_hal_printstr(struct ath_hal *ah, const char *str) ++{ ++ printk("%s", str); ++} ++EXPORT_SYMBOL(ath_hal_printstr); ++ + /* + * Format an Ethernet MAC for printing. + */ |