diff options
Diffstat (limited to 'package')
28 files changed, 280 insertions, 39 deletions
diff --git a/package/ppp/patches/010-use_target_for_configure.patch b/package/ppp/patches/010-use_target_for_configure.patch index e185be0..aff0df6 100644 --- a/package/ppp/patches/010-use_target_for_configure.patch +++ b/package/ppp/patches/010-use_target_for_configure.patch @@ -1,6 +1,11 @@ +configure: Allow overriding uname results - Use values exported from $(TOPDIR)/rules.mk for determining - the target system instead of the host configuration +In a cross compile setting it makes no sense to rely on the "uname" values +reported by the build host system. This patch allows overriding the +"uname -r", "uname -s" and "uname -m" results with the "UNAME_R", "UNAME_S" +and "UNAME_M" environment variables. + +Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> --- a/configure +++ b/configure diff --git a/package/ppp/patches/100-debian_ip-ip_option.patch b/package/ppp/patches/100-debian_ip-ip_option.patch index 4ba12fc..ca43cb2 100644 --- a/package/ppp/patches/100-debian_ip-ip_option.patch +++ b/package/ppp/patches/100-debian_ip-ip_option.patch @@ -1,3 +1,15 @@ +pppd: Allow specifying ip-up and ip-down scripts + +This patch implements the "ip-up-script" and "ip-down-script" options which +allow to specify the path of the ip-up and ip-down scripts to call. + +These options default to _PATH_IPUP and _PATH_IPDOWN to retain the +existing behaviour. + +The patch originated from the Debian project. + +Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> + --- a/pppd/ipcp.c +++ b/pppd/ipcp.c @@ -1939,7 +1939,7 @@ ipcp_up(f) diff --git a/package/ppp/patches/101-debian_close_dev_ppp.patch b/package/ppp/patches/101-debian_close_dev_ppp.patch index 2a30f45..232b10b 100644 --- a/package/ppp/patches/101-debian_close_dev_ppp.patch +++ b/package/ppp/patches/101-debian_close_dev_ppp.patch @@ -1,3 +1,15 @@ +pppd: Close already open ppp descriptors + +When using the kernel PPPoE driver in conjunction with the "persist" option, +the already open descriptor to /dev/ppp is not closed when the link is +reestablished. This eventually leads to high CPU load because the stray +descriptors are always reported as ready by select(). + +This patch closes the descriptor if it is already open when establishing a +new connection. It originated from the Debian project. + +Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> + --- a/pppd/sys-linux.c +++ b/pppd/sys-linux.c @@ -453,6 +453,13 @@ int generic_establish_ppp (int fd) diff --git a/package/ppp/patches/103-debian_fix_link_pidfile.patch b/package/ppp/patches/103-debian_fix_link_pidfile.patch index b8c4aaa..c8a23ed 100644 --- a/package/ppp/patches/103-debian_fix_link_pidfile.patch +++ b/package/ppp/patches/103-debian_fix_link_pidfile.patch @@ -1,3 +1,14 @@ +pppd: Fix creation of linkpidfile + +When pppd is run without "nodetach" or with "updetach", the linkpidfile is +never created. The call to create_linkpidfile() is protected by a check for +linkpidfile[0] but this is only filled in when create_linkpidfile() is called. + +This patch changes to code to allways uncondiationally call +create_linkpidfile(), it originated from the Debian project. + +Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> + --- a/pppd/main.c +++ b/pppd/main.c @@ -773,8 +773,7 @@ detach() diff --git a/package/ppp/patches/106-debian_stripMSdomain.patch b/package/ppp/patches/106-debian_stripMSdomain.patch index b65f52e..86af1ef 100644 --- a/package/ppp/patches/106-debian_stripMSdomain.patch +++ b/package/ppp/patches/106-debian_stripMSdomain.patch @@ -1,3 +1,16 @@ +pppd: Implement option to strip domain part from MS CHAP response + +This patch implements a new boolean option "chapms-strip-domain" which +strips the leading domain part of the username in a received MS Chap +response. + +When the option is set, all leading chars up to and including the last +backslash in the username are stripped. The option defaults to false. + +The patch originated from the Debian project. + +Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> + --- a/pppd/chap-new.c +++ b/pppd/chap-new.c @@ -58,6 +58,7 @@ int (*chap_verify_hook)(char *name, char diff --git a/package/ppp/patches/107-debian_pppatm_cleanup.patch b/package/ppp/patches/107-debian_pppatm_cleanup.patch deleted file mode 100644 index a3d80a8..0000000 --- a/package/ppp/patches/107-debian_pppatm_cleanup.patch +++ /dev/null @@ -1,32 +0,0 @@ ---- a/pppd/plugins/pppoatm/pppoatm.c -+++ b/pppd/plugins/pppoatm/pppoatm.c -@@ -75,13 +75,14 @@ static int setdevname_pppoatm(const char - //info("PPPoATM setdevname_pppoatm: '%s'", cp); - memset(&addr, 0, sizeof addr); - if (text2atm(cp, (struct sockaddr *) &addr, sizeof(addr), -- T2A_PVC | T2A_NAME) < 0) { -- if(doit) -- info("atm does not recognize: %s", cp); -+ T2A_PVC | T2A_NAME | T2A_WILDCARD) < 0) { -+ if (doit) -+ info("cannot parse the ATM address: %s", cp); - return 0; -- } -- if (!doit) return 1; -- //if (!dev_set_ok()) return -1; -+ } -+ if (!doit) -+ return 1; -+ - memcpy(&pvcaddr, &addr, sizeof pvcaddr); - strlcpy(devnam, cp, sizeof devnam); - devstat.st_mode = S_IFSOCK; -@@ -170,7 +171,7 @@ static void disconnect_pppoatm(void) - - void plugin_init(void) - { --#if defined(__linux__) -+#ifdef linux - extern int new_style_driver; /* From sys-linux.c */ - if (!ppp_available() && !new_style_driver) - fatal("Kernel doesn't support ppp_generic - " diff --git a/package/ppp/patches/107-debian_pppoatm_wildcard.patch b/package/ppp/patches/107-debian_pppoatm_wildcard.patch new file mode 100644 index 0000000..eaad2cd --- /dev/null +++ b/package/ppp/patches/107-debian_pppoatm_wildcard.patch @@ -0,0 +1,25 @@ +pppoatm: Allow wildcard ATM devices + +When operating pppd's pppoatm plugin with an USB ADSL modem, e.g. an +Alcatel Speedtouch, the ATM device number might change when the modem is +reconnected to the USB port or when the host controller resets the USB +device. + +This patch allows to specify the ATM device as wildcard which gives +enough flexibility to cope with changing device names. + +The patch originated from the Debain project. + +Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> + +--- a/pppd/plugins/pppoatm/pppoatm.c ++++ b/pppd/plugins/pppoatm/pppoatm.c +@@ -75,7 +75,7 @@ static int setdevname_pppoatm(const char + //info("PPPoATM setdevname_pppoatm: '%s'", cp); + memset(&addr, 0, sizeof addr); + if (text2atm(cp, (struct sockaddr *) &addr, sizeof(addr), +- T2A_PVC | T2A_NAME) < 0) { ++ T2A_PVC | T2A_NAME | T2A_WILDCARD) < 0) { + if(doit) + info("atm does not recognize: %s", cp); + return 0; diff --git a/package/ppp/patches/110-debian_defaultroute.patch b/package/ppp/patches/110-debian_defaultroute.patch index 0a0691e..41d2890 100644 --- a/package/ppp/patches/110-debian_defaultroute.patch +++ b/package/ppp/patches/110-debian_defaultroute.patch @@ -1,3 +1,15 @@ +pppd: Add "replacedefaultroute" and "noreplacedefaultroute" options + +This patch implements two new options, "replacedefaultroute" to replace any +existing system default route when specified and "noreplacedefaultroute" to +disable the "replacedefaultroute" option, which is useful in multi user +environments where the administrator wants to allow users to dial pppd +connections but not allow them to change the system default route. + +The patch originated from the Debian project. + +Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> + --- a/pppd/ipcp.c +++ b/pppd/ipcp.c @@ -198,6 +198,14 @@ static option_t ipcp_option_list[] = { diff --git a/package/ppp/patches/120-debian_ipv6_updown_option.patch b/package/ppp/patches/120-debian_ipv6_updown_option.patch index acee85b..c5457fa 100644 --- a/package/ppp/patches/120-debian_ipv6_updown_option.patch +++ b/package/ppp/patches/120-debian_ipv6_updown_option.patch @@ -1,3 +1,15 @@ +pppd: Allow specifying ipv6-up and ipv6-down scripts + +This patch implements the "ipv6-up-script" and "ipv6-down-script" options +which allow to specify the path of the ipv6-up and ipv6-down scripts to call. + +These options default to _PATH_IPV6UP and _PATH_IPV6DOWN to retain the +existing behaviour. + +The patch originated from the Debian project. + +Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> + --- a/pppd/main.c +++ b/pppd/main.c @@ -318,6 +318,8 @@ main(argc, argv) diff --git a/package/ppp/patches/200-makefile.patch b/package/ppp/patches/200-makefile.patch index af82674..9db908d 100644 --- a/package/ppp/patches/200-makefile.patch +++ b/package/ppp/patches/200-makefile.patch @@ -1,3 +1,10 @@ +pppd: tune Linux config defaults for OpenWrt + +This patch adjusts a number defaults to properly match the OpenWrt environment. +It is not intended for upstream. + +Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> + --- a/pppd/Makefile.linux +++ b/pppd/Makefile.linux @@ -48,7 +48,7 @@ MPPE=y diff --git a/package/ppp/patches/201-mppe_mppc_1.1.patch b/package/ppp/patches/201-mppe_mppc_1.1.patch index 62b09d4..3edd11e 100644 --- a/package/ppp/patches/201-mppe_mppc_1.1.patch +++ b/package/ppp/patches/201-mppe_mppc_1.1.patch @@ -1,3 +1,10 @@ +pppd: add support for MPPE and MPPC encryption and compression protocols + +This is a forward ported version of ppp-2.4.3-mppe-mppc-1.1.patch.gz found on +http://mppe-mppc.alphacron.de/ . + +Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> + --- a/include/linux/ppp-comp.h +++ b/include/linux/ppp-comp.h @@ -36,7 +36,7 @@ diff --git a/package/ppp/patches/202-no_strip.patch b/package/ppp/patches/202-no_strip.patch index 359db14..87c76ad 100644 --- a/package/ppp/patches/202-no_strip.patch +++ b/package/ppp/patches/202-no_strip.patch @@ -1,3 +1,11 @@ +build: Do not strip binaries on install + +Strippign executables should be handled by the distro packaging, not by ppp +itself. This patch removes the "-s" (strip) switch from all "install" commands +in order to install unstripped binaries into the destination prefix. + +Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> + --- a/chat/Makefile.linux +++ b/chat/Makefile.linux @@ -25,7 +25,7 @@ chat.o: chat.c diff --git a/package/ppp/patches/203-opt_flags.patch b/package/ppp/patches/203-opt_flags.patch index f0d416f..a369163 100644 --- a/package/ppp/patches/203-opt_flags.patch +++ b/package/ppp/patches/203-opt_flags.patch @@ -1,3 +1,11 @@ +build: Move optimization flags into a separate variable + +Isolate optimization related compiler flags from CFLAGS and move them into a +separate COPTS variable so that it is easier to override optimizations from +the environment. + +Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> + --- a/pppd/plugins/radius/Makefile.linux +++ b/pppd/plugins/radius/Makefile.linux @@ -12,7 +12,8 @@ VERSION = $(shell awk -F '"' '/VERSION/ diff --git a/package/ppp/patches/205-no_exponential_timeout.patch b/package/ppp/patches/205-no_exponential_timeout.patch index 14d00cf..7119fb8 100644 --- a/package/ppp/patches/205-no_exponential_timeout.patch +++ b/package/ppp/patches/205-no_exponential_timeout.patch @@ -1,3 +1,10 @@ +pppd: Don't use exponential timeout in discovery phase + +This patch removes the exponential timeout increase between PADO or PADS +discovery attempts. + +Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> + --- a/pppd/plugins/rp-pppoe/discovery.c +++ b/pppd/plugins/rp-pppoe/discovery.c @@ -548,7 +548,9 @@ discovery(PPPoEConnection *conn) diff --git a/package/ppp/patches/206-compensate_time_change.patch b/package/ppp/patches/206-compensate_time_change.patch index 041ae1f..fb6c656 100644 --- a/package/ppp/patches/206-compensate_time_change.patch +++ b/package/ppp/patches/206-compensate_time_change.patch @@ -1,3 +1,16 @@ +pppd: Watch out for time warps + +On many embedded systems there is no battery backed RTC and a proper system +time only becomes available through NTP after establishing a connection. + +When the clock suddenly jumps forward, the internal accounting (connect time) +is confused resulting in unreliable data. + +This patch implements periodic clock checking to look for time warps, if one +is detected, the internal counters are adjusted accordingly. + +Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> + --- a/pppd/main.c +++ b/pppd/main.c @@ -90,6 +90,7 @@ diff --git a/package/ppp/patches/207-lcp_mtu_max.patch b/package/ppp/patches/207-lcp_mtu_max.patch index 32bcad3..1ebcf41 100644 --- a/package/ppp/patches/207-lcp_mtu_max.patch +++ b/package/ppp/patches/207-lcp_mtu_max.patch @@ -1,3 +1,11 @@ +pppd: Cap MTU to the user configured value + +This patchs caps the calculated MTU value in lcp.c to the user specified "mru" +option value. Without this patch pppd would advertise a different MTU value +compared to what is set on the local interface in some cases. + +Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> + --- a/pppd/lcp.c +++ b/pppd/lcp.c @@ -1904,12 +1904,12 @@ lcp_up(f) diff --git a/package/ppp/patches/208-fix_status_code.patch b/package/ppp/patches/208-fix_status_code.patch index c512354..25e2a10 100644 --- a/package/ppp/patches/208-fix_status_code.patch +++ b/package/ppp/patches/208-fix_status_code.patch @@ -1,3 +1,15 @@ +pppd: Do not clobber exit codes on hangup + +When a modem hangup occurs, pppd unconditionally sets the exit status code +to EXIT_HANGUP. This patch only sets EXIT_HANGUP if the exit status code is +not already set to an error value. + +The motiviation of this patch is to allow applications which remote control +pppd to react properly on errors, e.g. only redial (relaunch pppd) if there +was a hangup, but not if the CHAP authentication failed. + +Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> + --- a/pppd/main.c +++ b/pppd/main.c @@ -1048,7 +1048,8 @@ get_input() diff --git a/package/ppp/patches/300-filter-pcap-includes-lib.patch b/package/ppp/patches/300-filter-pcap-includes-lib.patch index fa8b616..d8dcc64 100644 --- a/package/ppp/patches/300-filter-pcap-includes-lib.patch +++ b/package/ppp/patches/300-filter-pcap-includes-lib.patch @@ -1,3 +1,10 @@ +build: Add required CFLAGS for libpcap + +This patch adds some flags to required to properly link libpcap within the +OpenWrt environment. + +Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> + --- a/pppd/Makefile.linux +++ b/pppd/Makefile.linux @@ -170,8 +170,8 @@ endif diff --git a/package/ppp/patches/310-precompile_filter.patch b/package/ppp/patches/310-precompile_filter.patch index 5d2c8f1..87b9687 100644 --- a/package/ppp/patches/310-precompile_filter.patch +++ b/package/ppp/patches/310-precompile_filter.patch @@ -1,3 +1,16 @@ +pppd: Implement support for precompiled pcap filters + +This patch implements support for precompiled pcap filters which is useful to +support dial-on-demand on memory constrained embedded devices without having +to link the full libpcap into pppd to generate the filters during runtime. + +Two new options are introduced; "precompiled-pass-filter" specifies a pre- +compiled filter file containing rules to match packets which should be passed, +"precompiled-active-filter" specifies a filter file containing rules to match +packets which are treated as active. + +Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> + --- a/pppd/Makefile.linux +++ b/pppd/Makefile.linux @@ -50,6 +50,9 @@ MPPE=y diff --git a/package/ppp/patches/320-custom_iface_names.patch b/package/ppp/patches/320-custom_iface_names.patch index 26e6837..a95f4f8 100644 --- a/package/ppp/patches/320-custom_iface_names.patch +++ b/package/ppp/patches/320-custom_iface_names.patch @@ -1,3 +1,12 @@ +pppd: Support arbitrary interface names + +This patch implements a new string option "ifname" which allows to specify +fully custom PPP interface names on Linux. It does so by renaming the +allocated pppX device immediately after it has been created to the requested +interface name. + +Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> + --- a/pppd/main.c +++ b/pppd/main.c @@ -745,8 +745,11 @@ void diff --git a/package/ppp/patches/330-retain_foreign_default_routes.patch b/package/ppp/patches/330-retain_foreign_default_routes.patch index dc6ed8d..0d7fff9 100644 --- a/package/ppp/patches/330-retain_foreign_default_routes.patch +++ b/package/ppp/patches/330-retain_foreign_default_routes.patch @@ -1,3 +1,15 @@ +pppd: Retain foreign default routes on Linux + +On Linux, when pppd attempts to delete its default route it does not fill +the rt_dev field of the struct rtentry used to match the system default route. +As a consequence, pppd happily deletes any default route even if it belongs +to another interface. + +This patch makes pppd fill out the rt_dev field so that only own default +routes are ever matched. + +Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> + --- a/pppd/sys-linux.c +++ b/pppd/sys-linux.c @@ -1743,6 +1743,7 @@ int cifdefaultroute (int unit, u_int32_t diff --git a/package/ppp/patches/340-populate_default_gateway.patch b/package/ppp/patches/340-populate_default_gateway.patch index ae495ee..9a0284e 100644 --- a/package/ppp/patches/340-populate_default_gateway.patch +++ b/package/ppp/patches/340-populate_default_gateway.patch @@ -1,3 +1,16 @@ +pppd: Fill in default gateway on Linux + +On Linux, when pppd creates the default route, it does not set the peer +address as gateway, leading to a default route without gateway address. + +This behaviour breaks various downstream programs which attempt to infer +the default gateway IP address from the system default route entry. + +This patch addresses the issue by filling in the peer address as gateway +when generating the default route entry. + +Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> + --- a/pppd/sys-linux.c +++ b/pppd/sys-linux.c @@ -1697,6 +1697,9 @@ int sifdefaultroute (int unit, u_int32_t diff --git a/package/ppp/patches/400-simplify_kernel_checks.patch b/package/ppp/patches/400-simplify_kernel_checks.patch index 6ddf86a..ec82576 100644 --- a/package/ppp/patches/400-simplify_kernel_checks.patch +++ b/package/ppp/patches/400-simplify_kernel_checks.patch @@ -1,3 +1,13 @@ +pppd: Remove runtime kernel checks + +On embedded system distributions the required kernel features for pppd are +more or less guaranteed to be present, so there is not much point in +performing runtime checks, it just increases the binary size. + +This patch removes the runtime kernel feature checks. + +Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> + --- a/pppd/sys-linux.c +++ b/pppd/sys-linux.c @@ -203,7 +203,7 @@ static int driver_is_old = 0; @@ -88,11 +98,11 @@ return 0; --- a/pppd/plugins/pppoatm/pppoatm.c +++ b/pppd/plugins/pppoatm/pppoatm.c -@@ -171,14 +171,6 @@ static void disconnect_pppoatm(void) +@@ -170,14 +170,6 @@ static void disconnect_pppoatm(void) void plugin_init(void) { --#ifdef linux +-#if defined(__linux__) - extern int new_style_driver; /* From sys-linux.c */ - if (!ppp_available() && !new_style_driver) - fatal("Kernel doesn't support ppp_generic - " @@ -126,9 +136,9 @@ add_options(Options); info("RP-PPPoE plugin version %s compiled against pppd %s", ---- a/pppd/plugins/pppol2tp/pppol2tp.c 2010-11-15 12:12:43.000000000 +0000 -+++ b/pppd/plugins/pppol2tp/pppol2tp.c 2012-04-24 15:53:58.806260309 +0100 -@@ -488,12 +488,7 @@ static void pppol2tp_check_options(void) +--- a/pppd/plugins/pppol2tp/pppol2tp.c ++++ b/pppd/plugins/pppol2tp/pppol2tp.c +@@ -500,12 +500,7 @@ static void pppol2tp_cleanup(void) void plugin_init(void) { diff --git a/package/ppp/patches/401-no_record_file.patch b/package/ppp/patches/401-no_record_file.patch index 6883720..94c0263 100644 --- a/package/ppp/patches/401-no_record_file.patch +++ b/package/ppp/patches/401-no_record_file.patch @@ -1,3 +1,10 @@ +pppd: Remove the "record" option + +On many embedded systems there is not enough space to record PPP session +information to the permanent storage, therfore remove this option. + +Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> + --- a/pppd/pppd.h +++ b/pppd/pppd.h @@ -309,7 +309,6 @@ extern int holdoff; /* Dead time before diff --git a/package/ppp/patches/403-no_wtmp.patch b/package/ppp/patches/403-no_wtmp.patch index 018bd5b..7123320 100644 --- a/package/ppp/patches/403-no_wtmp.patch +++ b/package/ppp/patches/403-no_wtmp.patch @@ -1,3 +1,10 @@ +pppd: Disable wtmp support + +Many uClibc based environments lack wtmp and utmp support, therfore remove +the code updating the wtmp information. + +Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> + --- a/pppd/sys-linux.c +++ b/pppd/sys-linux.c @@ -2254,6 +2254,7 @@ int ppp_available(void) diff --git a/package/ppp/patches/404-remove_obsolete_protocol_names.patch b/package/ppp/patches/404-remove_obsolete_protocol_names.patch index 71b4d97..edbca76 100644 --- a/package/ppp/patches/404-remove_obsolete_protocol_names.patch +++ b/package/ppp/patches/404-remove_obsolete_protocol_names.patch @@ -1,3 +1,10 @@ +pppd: Remove historical protocol names + +Remove a number of historical protocol entries from pppd's builtin list, this +reduced the binary size without loss of features. + +Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> + --- a/pppd/main.c +++ b/pppd/main.c @@ -882,14 +882,17 @@ struct protocol_list { diff --git a/package/ppp/patches/405-no_multilink_option.patch b/package/ppp/patches/405-no_multilink_option.patch index fc342b7..97a79c4 100644 --- a/package/ppp/patches/405-no_multilink_option.patch +++ b/package/ppp/patches/405-no_multilink_option.patch @@ -1,3 +1,12 @@ +pppd: Support "nomp" option even if multilink support is off + +This patch moves the "nomp" option entry outside of the defines protecting +the multilink specific code. The motivation is to allow "nomp" even if pppd +does not support multilink, so that controlling programs can unconditionally +pass it to pppd regardless of the compile time features. + +Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> + --- a/pppd/options.c +++ b/pppd/options.c @@ -318,13 +318,14 @@ option_t general_options[] = { diff --git a/package/ppp/patches/430-pppol2tpv3-struct.patch b/package/ppp/patches/430-pppol2tpv3-struct.patch index c2f163b..4f517df 100644 --- a/package/ppp/patches/430-pppol2tpv3-struct.patch +++ b/package/ppp/patches/430-pppol2tpv3-struct.patch @@ -1,3 +1,10 @@ +pppol2tp: Provide struct pppol2tpv3_addr to align with Linux + +The struct pppol2tpv3_addr is referenced in the current Linux kernel sources +but not provided by the shipped kernel headers, add it. + +Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> + --- a/include/linux/if_pppol2tp.h +++ b/include/linux/if_pppol2tp.h @@ -32,6 +32,20 @@ struct pppol2tp_addr |