diff options
Diffstat (limited to 'target/linux/Config.in')
| -rw-r--r-- | target/linux/Config.in | 492 |
1 files changed, 492 insertions, 0 deletions
diff --git a/target/linux/Config.in b/target/linux/Config.in new file mode 100644 index 0000000..20099fe --- /dev/null +++ b/target/linux/Config.in @@ -0,0 +1,492 @@ +menu "Kernel Configuration / Device Support" + +comment "Device specific configuration" + +source "target/linux/*-2.[46]/Config.in" + +comment "Kernel modules" + +menu "Networking modules" + +config PACKAGE_KMOD_ATM + prompt "kmod-atm.......................... ATM support" + tristate + default y if LINUX_2_4_AR7 + default m + help + ATM support + +config PACKAGE_KMOD_IPIP + prompt "kmod-ipip......................... IP in IP encapsulation support" + tristate + default m + help + Kernel module for IP in IP encapsulation + +config PACKAGE_KMOD_RING + prompt "kmod-ring......................... PF Ring" + tristate + default m + help + PF Ring + +config PACKAGE_KMOD_TUN + prompt "kmod-tun.......................... Universal TUN/TAP driver" + tristate + default m + help + Kernel support for the TUN/TAP tunneling device + +endmenu + +menu "Block devices support" + +config PACKAGE_kmod-ide-core + prompt "kmod-ide-core..................... IDE support" + tristate + default m + depends LINUX_2_4_X86 || LINUX_2_6_X86 || LINUX_2_4_BRCM || LINUX_2_6_BRCM + help + Kernel modules for IDE support + useful for usb mass storage devices (e.g. on WL-HDD) + + Includes: + - ide-core + - ide-detect + - ide-disk + +config PACKAGE_kmod-ide-pdc202xx + prompt "kmod-ide-pdc202xx................. PDC202xx driver" + tristate + default m + depends PACKAGE_kmod-ide-core + depends LINUX_2_4_X86 || LINUX_2_6_X86 || LINUX_2_4_BRCM || LINUX_2_6_BRCM + help + Kernel modules for IDE support + useful for usb mass storage devices (e.g. on WL-HDD) + + Includes: + - ide-core + - ide-detect + - ide-disk + +config PACKAGE_KMOD_LOOP + prompt "kmod-loop......................... Loop mount support" + tristate + default m + help + Kernel module for loop mount support + +config PACKAGE_KMOD_NBD + prompt "kmod-nbd.......................... Network Block Device" + tristate + default m + help + Kernel module for network block device + +endmenu + +menu "Filesystems support" + +config PACKAGE_KMOD_FS_CIFS + prompt "kmod-fs-cifs...................... CIFS support" + tristate + default m + help + Kernel modules for CIFS support + +config PACKAGE_KMOD_FS_EXT2 + prompt "kmod-fs-ext2...................... EXT2 filesystem support" + tristate + default m + help + Kernel modules for EXT2 filesystem support + +config PACKAGE_KMOD_FS_EXT3 + prompt "kmod-fs-ext3...................... EXT3 filesystem support" + tristate + default m + help + Kernel modules for EXT3 filesystem support + +config PACKAGE_KMOD_FS_HFSPLUS + prompt "kmod-fs-hfsplus................... HFS+ filesystem support" + tristate + default m + help + Kernel modules for HFS+ filesystem support + +config PACKAGE_KMOD_FS_NFS + prompt "kmod-fs-nfs....................... NFS support" + tristate + default m + help + Kernel modules for NFS support + Includes lockd, nfs and sunrpc + +config PACKAGE_KMOD_FS_VFAT + prompt "kmod-fs-vfat...................... VFAT filesystem support" + tristate + default m + help + Kernel modules for VFAT filesystem support + useful for usb mass storage devices + +config PACKAGE_KMOD_FS_XFS + prompt "kmod-fs-xfs....................... XFS filesystem support" + tristate + default m + help + Kernel modules for XFS filesystem support + +endmenu + +menu "Multimedia devices support" + +config PACKAGE_KMOD_PWC + prompt "kmod-pwc.......................... Kernel driver for USB Philips Cameras" + tristate + depends PACKAGE_KMOD_USB + default m + +config PACKAGE_KMOD_SOUNDCORE + prompt "kmod-soundcore.................... Soundcard support" + tristate + default n + help + Base support for soundcards + Requires either USB soundcard support (OSS) or ALSA package to be useful + +config PACKAGE_KMOD_VIDEODEV + prompt "kmod-videodev..................... Video (For Linux) kernel support" + tristate + default m + +endmenu + +menu "Native Language support" + +config PACKAGE_KMOD_NLS_BASE + prompt "kmod-nls-base..................... Native Language support" + tristate + default m + help + Kernel native language support + +config PACKAGE_KMOD_NLS_CP437 + prompt "kmod-nls-cp437.................. Codepage 437 (United States, Canada)" + tristate + default m + depends PACKAGE_KMOD_NLS_BASE + help + Kernel native language support + +config PACKAGE_KMOD_NLS_CP850 + prompt "kmod-nls-cp850.................. Codepage 850 (Europe)" + tristate + default m + depends PACKAGE_KMOD_NLS_BASE + help + Kernel native language support + +config PACKAGE_KMOD_NLS_ISO8859_1 + prompt "kmod-nls-iso8859-1.............. NLS ISO 8859-1 (Latin 1; Western European Languages)" + tristate + default m + depends PACKAGE_KMOD_NLS_BASE + help + Kernel native language support + +config PACKAGE_KMOD_NLS_ISO8859_15 + prompt "kmod-nls-iso8859-15............. NLS ISO 8859-15 (Latin 15; Western European Languages with Euro)" + tristate + default m + depends PACKAGE_KMOD_NLS_BASE + help + Kernel native language support + +config PACKAGE_KMOD_NLS_UTF8 + prompt "kmod-nls-utf8................... NLS UTF8" + tristate + default m + depends PACKAGE_KMOD_NLS_BASE + help + Kernel native language support + +endmenu + +menu "Network devices support" + depends LINUX_2_4_X86 || LINUX_2_6_X86 + + +config PACKAGE_KMOD_NET_AIRO + prompt "kmod-net-airo..................... Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards kernel support" + tristate + depends LINUX_2_4_X86 || LINUX_2_6_X86 + default m + help + This is the standard Linux driver to support Cisco/Aironet ISA and + PCI 802.11 wireless cards. + It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X + - with or without encryption) as well as card before the Cisco + acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). + + This driver support both the standard Linux Wireless Extensions + and Cisco proprietary API, so both the Linux Wireless Tools and the + Cisco Linux utilities can be used to configure the card. + + +config PACKAGE_KMOD_NET_HERMES + prompt "kmod-net-hermes................... Hermes chipset 802.11b support (Orinoco/Prism2/Symbol) kernel support" + tristate + depends LINUX_2_4_X86 || LINUX_2_6_X86 + default m + help + A driver for 802.11b wireless cards based based on the "Hermes" or + Intersil HFA384x (Prism 2) MAC controller. This includes the vast + majority of the PCMCIA 802.11b cards (which are nearly all rebadges) + - except for the Cisco/Aironet cards. Cards supported include the + Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco, + Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya, + IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear + MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel + PRO/Wireless, and Symbol Spectrum24 High Rate amongst others. + +config PACKAGE_KMOD_NET_HERMES_PCI + prompt "kmod-net-hermes-pci............. Intersil Prism 2.5 PCI 802.11b adaptor support" + tristate + default m + depends PACKAGE_KMOD_NET_HERMES + help + Enable support for PCI and mini-PCI 802.11b wireless NICs based on + the Prism 2.5 chipset. These are true PCI cards, not the 802.11b + PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also + common. Some of the built-in wireless adaptors in laptops are of + this variety. + +config PACKAGE_KMOD_NET_HERMES_PLX + prompt "kmod-net-hermes-plx............. Hermes in PLX9052 based PCI adaptor (Netgear MA301, etc.) kernel support" + tristate + default m + depends PACKAGE_KMOD_NET_HERMES + help + Enable support for PCMCIA cards supported by the "Hermes" (aka + orinoco_cs) driver when used in PLX9052 based PCI adaptors. These + adaptors are not a full PCMCIA controller but act as a more limited + PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that + 802.11b PCMCIA cards can be used in desktop machines. The Netgear + MA301 is such an adaptor. + + + +config PACKAGE_KMOD_NET_PRISM54 + prompt "kmod-net-prism54.................. Intersil Prism GT/Duette/Indigo PCI/PCMCIA cards kernel support" + tristate + depends LINUX_2_4_X86 || LINUX_2_6_X86 || LINUX_2_4_BRCM || LINUX_2_6_BRCM + default m + help + Enable PCI and Cardbus support for the following chipset based cards: + + * ISL3880 - Prism GT 802.11 b/g + * ISL3877 - Prism Indigo 802.11 a + * ISL3890 - Prism Duette 802.11 a/b/g + + For a complete list of supported cards visit <http://prism54.org>. + Here is the latest confirmed list of supported cards: + + * 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 + * Allnet ALL0271 PCI Card + * Compex WL54G Cardbus Card + * Corega CG-WLCB54GT Cardbus Card + * D-Link Air Plus Xtreme G A1 Cardbus Card aka DWL-g650 + * I-O Data WN-G54/CB Cardbus Card + * Kobishi XG-300 aka Z-Com Cardbus Card + * Netgear WG511 Cardbus Card + * Ovislink WL-5400PCI PCI Card + * Peabird WLG-PCI PCI Card + * Sitecom WL-100i Cardbus Card + * Sitecom WL-110i PCI Card + * SMC2802W - EZ Connect g 2.4GHz 54 Mbps Wireless PCI Card + * SMC2835W - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card + * Z-Com XG-900 PCI Card + * Zyxel G-100 Cardbus Card + + If you enable this, you require a firmware file as well. + You will need to copy this to /usr/lib/hotplug/firmware/isl3890. + You can get this non-GPL'd firmware file from the Prism54 project page: + <http://prism54.org>. + + Note: You need a motherboard with DMA support to use any of these cards. + +endmenu + +menu "PCMCIA/CardBus support" + depends PCMCIA_SUPPORT + +config PACKAGE_KMOD_PCMCIA_CORE + prompt "kmod-pcmcia-core.................. PCMCIA/CardBus support" + tristate + default m + +config PACKAGE_KMOD_PCMCIA_SERIAL + prompt "kmod-pcmcia-serial.............. PCMCIA/CardBus serial device support" + tristate + default m + depends PACKAGE_KMOD_PCMCIA_CORE + +endmenu + +menu "USB support" + depends USB_SUPPORT + +config PACKAGE_KMOD_USB + prompt "kmod-usb-core..................... USB support" + tristate + default m + +config PACKAGE_KMOD_USB_UHCI + prompt "kmod-usb-uhci................... Support for UHCI controllers" + tristate + default n if LINUX_2_6_AU1000 + depends PACKAGE_KMOD_USB + select PACKAGE_KMOD_USB_CONTROLLER + +config PACKAGE_KMOD_USB_OHCI + prompt "kmod-usb-ohci................... Support for OHCI controllers" + tristate + default m + depends PACKAGE_KMOD_USB + select PACKAGE_KMOD_USB_CONTROLLER + +config PACKAGE_KMOD_USB2 + prompt "kmod-usb2....................... Support for USB 2.0 controllers" + tristate + default n if LINUX_2_6_AU1000 + depends PACKAGE_KMOD_USB + select PACKAGE_KMOD_USB_CONTROLLER + +config PACKAGE_KMOD_USB_CONTROLLER + tristate + depends on PACKAGE_KMOD_USB_UHCI || PACKAGE_KMOD_USB_OHCI || PACKAGE_KMOD_USB2 + default n + +config PACKAGE_KMOD_USB_ACM + prompt "kmod-usb-acm...................... Support for USB modems/isdn controllers" + tristate + default m + depends PACKAGE_KMOD_USB_CONTROLLER + +config PACKAGE_KMOD_USB_AUDIO + prompt "kmod-usb-audio.................... Support for USB soundcards" + tristate + default m + depends PACKAGE_KMOD_USB_CONTROLLER + select PACKAGE_KMOD_SOUNDCORE + +config PACKAGE_KMOD_USB_PRINTER + prompt "kmod-usb-printer.................. Support for USB printers" + tristate + default m + depends PACKAGE_KMOD_USB_CONTROLLER + +config PACKAGE_KMOD_USB_SERIAL + prompt "kmod-usb-serial................... Support for USB-to-serial converters" + tristate + default m + depends PACKAGE_KMOD_USB_CONTROLLER + +config PACKAGE_KMOD_USB_SERIAL_BELKIN + prompt "kmod-usb-serial-belkin.......... Support for Belkin USB-to-serial converters" + tristate + default m + depends PACKAGE_KMOD_USB_SERIAL + +config PACKAGE_KMOD_USB_SERIAL_FTDI + prompt "kmod-usb-serial-ftdi............ Support for FTDI USB-to-serial converterr" + tristate + default m + depends PACKAGE_KMOD_USB_SERIAL + +config PACKAGE_KMOD_USB_SERIAL_MCT_U232 + prompt "kmod-usb-serial-mct-u232........ Support for Magic Control Technology USB-to-Serial converters" + tristate + default m + depends PACKAGE_KMOD_USB_SERIAL + +config PACKAGE_KMOD_USB_SERIAL_PL2303 + prompt "kmod-usb-serial-pl2303.......... Support for Prolific PL2303 USB-to-Serial converters" + tristate + default m + depends PACKAGE_KMOD_USB_SERIAL + +config PACKAGE_KMOD_USB_SERIAL_VISOR + prompt "kmod-usb-serial-visor........... Support for Handspring Visor / Palm m50x / Sony Clie Driver" + tristate + default m + depends PACKAGE_KMOD_USB_SERIAL + +config PACKAGE_KMOD_USB_STORAGE + prompt "kmod-usb-storage.................. Support for USB storage devices" + tristate + default m + depends PACKAGE_KMOD_USB_CONTROLLER + +config PACKAGE_KMOD_USB_ATM + prompt "kmod-usb-atm...................... Support for USB ATM devices" + tristate + default m + depends PACKAGE_KMOD_USB_CONTROLLER + +config PACKAGE_KMOD_USB_ATM_SPEEDTOUCH + prompt "kmod-usb-atm-speedtouch......... Support for USB Speedtouch ADSL modem" + tristate + default m + depends PACKAGE_KMOD_USB_ATM + +endmenu + +menu "Misc. devices support" + +config PACKAGE_KMOD_AX25 + prompt "kmod-ax25......................... AX25 support" + tristate + default m + help + Kernel modules for AX25 protocol family + + This package contains both the AX25 layer 2 support (ax25) and AX25 KISS driver (mkiss) + +config PACKAGE_KMOD_BLUETOOTH + prompt "kmod-bluetooth.................... Bluetooth drivers and network stack" + tristate + depends PCI_SUPPORT || USB_SUPPORT + default m + help + Bluetooth drivers and network stack + +config PACKAGE_KMOD_LP + prompt "kmod-lp........................... Parallel port and lp support" + tristate + default m + help + Kernel modules for line printer and parallel port support + +config PACKAGE_KMOD_SOFTDOG + prompt "kmod-softdog...................... Software watchdog" + tristate + default m + help + Kernel modules for software watchdog driver + +config PACKAGE_KMOD_WD1100 + prompt "kmod-wd1100....................... Soekris net4801 watchdog" + tristate + default y + depends LINUX_2_4_X86 + help + Driver for the NatSemi SC1x00 series Watchdog + found on Soekris net4801 boards + +endmenu + +endmenu |