diff options
Diffstat (limited to 'target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_intc.h')
-rw-r--r-- | target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_intc.h | 63 |
1 files changed, 63 insertions, 0 deletions
diff --git a/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_intc.h b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_intc.h new file mode 100644 index 0000000..70dd6bb --- /dev/null +++ b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_intc.h @@ -0,0 +1,63 @@ +/* + * ADM5120 interrupt controller definitions + * + * This header file defines the hardware registers of the ADM5120 SoC + * built-in interrupt controller. + * + * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _MACH_ADM5120_INTC_H +#define _MACH_ADM5120_INTC_H + +/* + * INTC register offsets + */ +#define INTC_REG_IRQ_STATUS 0x00 /* Interrupt status after masking */ +#define INTC_REG_IRQ_RAW_STATUS 0x04 /* Interrupt status before masking */ +#define INTC_REG_IRQ_ENABLE 0x08 /* Used to enable the interrupt sources */ +#define INTC_REG_IRQ_ENABLE_CLEAR 0x0C /* Used to disable the interrupt sources */ +#define INTC_REG_IRQ_DISABLE INTC_REG_IRQ_ENABLE_CLEAR +#define INTC_REG_INT_MODE 0x14 /* The interrupt mode of the sources */ +#define INTC_REG_FIQ_STATUS 0x18 /* FIQ status */ +#define INTC_REG_IRQ_TEST_SOURCE 0x1C +#define INTC_REG_IRQ_SOURCE_SELECT 0x20 +#define INTC_REG_INT_LEVEL 0x24 + +/* + * INTC IRQ numbers + */ +#define INTC_IRQ_TIMER 0 /* built in timer */ +#define INTC_IRQ_UART0 1 /* built-in UART0 */ +#define INTC_IRQ_UART1 2 /* built-in UART1 */ +#define INTC_IRQ_USBC 3 /* USB Host Controller */ +#define INTC_IRQ_GPIO2 4 /* GPIO line 2 */ +#define INTC_IRQ_GPIO4 5 /* GPIO line 4 */ +#define INTC_IRQ_PCI0 6 /* PCI slot 2 */ +#define INTC_IRQ_PCI1 7 /* PCI slot 3 */ +#define INTC_IRQ_PCI2 8 /* PCI slot 4 */ +#define INTC_IRQ_SWITCH 9 /* built-in ethernet switch */ +#define INTC_IRQ_LAST INTC_IRQ_SWITCH +#define INTC_IRQ_COUNT 10 + +/* + * INTC register bits + */ +#define INTC_INT_TIMER (1 << INTC_IRQ_TIMER) +#define INTC_INT_UART0 (1 << INTC_IRQ_UART0) +#define INTC_INT_UART1 (1 << INTC_IRQ_UART1) +#define INTC_INT_USBC (1 << INTC_IRQ_USBC) +#define INTC_INT_INTX0 (1 << INTC_IRQ_INTX0) +#define INTC_INT_INTX1 (1 << INTC_IRQ_INTX1) +#define INTC_INT_PCI0 (1 << INTC_IRQ_PCI0) +#define INTC_INT_PCI1 (1 << INTC_IRQ_PCI1) +#define INTC_INT_PCI2 (1 << INTC_IRQ_PCI2) +#define INTC_INT_SWITCH (1 << INTC_IRQ_SWITCH) +#define INTC_INT_ALL ((1 << INTC_IRQ_COUNT) - 1) + +#endif /* _MACH_ADM5120_INTC_H */ |